MIB Catalog

The MIB module for the management of the Virtual Storage Networks (VSANs) within the frame work of Cisco's VSAN Architecture. This MIB enables the users to configure

Agent capabilities for CISCO-VSI-CONTROLLER-MIB.

This MIB module is used for configuring ATM Capable Switch to be aware of VSI Controller information. Terminolgies used: VSI - Virtual Switch Interface, a hardware-indepen

This MIB module contains objects related to the master side of the the Virtual Switch Interface protocol used for control of ATM switches.

This MIB module contains objects related to the master side of the Virtual Switch Interface protocol used for control of ATM switches.

The capabilities description of CISCO-VTP-MIB.

The MIB module for entities implementing the VTP protocol and Vlan management.

This MIB module provides network management support for Cisco cellular 3G and 4G LTE WAN products. *** ABBREVIATIONS, ACRONYMS, AND SYMBOLS *** 1xRTT - 1 times Radio Tra

The agent capabilities for CISCO-WAN-ATM-CONN-MIB in MGX8800 Series. - The capability cwAtmConnCapabilityAxsmV2R0160 is for AXSM in MGX Release 2.1.60.

The Agent Capabilities for CISCO-WAN-ATM-CONN-STAT-MIB for different Service Modules in in MGX8850 Series. - The cwaConnStatCapabilityAxsmV21R60 is for

This MIB module is intended for the management of 'Closed User Group(CUG)' in Cisco ATM switches. This MIB definition is based upon 'Closed User Group' recommended

A management station can use this MIB to provision, manage or delete one or more 'parties' on an ATM point-to-multipoint Soft PVCC(SPVC) connection. The user must add a r

This MIB facilitates the maintenance of preferred routes configuration.

The capabilities description of CISCO-WAN-CELL-EXT-MIB.

This MIB module is an extension of CISCO-WAN-3G-MIB.my, and it provides network management support for Cisco cellular WAN 4G/LTE products. *** ABBREVIATIONS, ACRO

The MIB to configure Connection Specific parameters and statistics related information in a Service Module. The Service Module(SM) is defined as any Module which provides

The Agent Capabilities for CISCO-WAN-NCDP-MIB.

This MIB module is intended for the management of network clock distribution and the Network Clock Distribution Protocol (NCDP) in Cisco MGX ATM switches. This MIB

Agent capabilities for CISCO-WAN-OPTIMIZATION MIB

This MIB is for managing Wide Area Network (WAN) Optimization systems. The objective of WAN optimization system is to reduce as much traffic as possible on WAN link and improve the

The Agent Capabilities for CISCO-WAN-RSRC-PART-MIB.

The MIB module to manage resource partition objects. A resource partition is configured on a virtual interface (ifType value atmVirtual(149)) or atm interface (ifType value atm(37)).

MIB module to manage SCT files in a node. SCTs (Service Class Templates) are nodal configuration files, which define the traffic characteristics of a switch bas

The Agent Capabilities for CISCO-WAN-TOPOLOGY-MIB. This MIB is used in the MGX8850 product family, which contains the MGX8850 and MGX8950 switches.

A management station can use this MIB module for the maintenance of persistent topology information of the PNNI network. Previously, a management station had to

Cisco WebEx Collaboration Host is a software-only system, with hardware independence a key goal. To that end, it will be designed to work only on a VMware virtual platform

Agent capabilities for CISCO-WDS-IDS-MIB

This MIB is intended to be implemented on all IOS based network entities that provide Wireless Domain Services, for the purpose of providing network

This MIB is intended to be implemented on all Cisco network entities that provide Wireless Domain Services (WDS). The WDS provides a control mechanism for

This MIB module defines Cisco-specific objects that add to the functionality defined in CISCO-WIRELESS-DOCS-IF-MIB. These objects configure the scheduler that s

This is the MIB Module for MCNS compliant Radio Frequency (RF) interfaces in wireless point-to-multipoint subscriber units (SU) and wireless Head-end (HE). Glo

MIB module

This is the MIB Module for the Cisco Wireless Radio Point to Point interface specification. I) Relationship of the Cisco Wireless Radio IF MIB to Interfaces MIB: One ins

This MIB is intended to be implemented on those Network Management applications that manage a network of wireless devices through the Controller and send relevant management

This is the MIB Module for the Cisco Wireless Radio Point to MultiPoint interface link metrics specification. Glossary The following terms are used in the MIB d

MIB module

This is the MIB Module for the Cisco Wireless Radio Point to MultiPoint interface specification.

This is the MIB Module for the Baseline Privacy Interface (BPI) at Point to Point Wireless Radio Card. This is a specialization on the MCNS docsBpiMib for Cisco Wireless point to point communi

MIB module

This MIB module provides network management and configuration support for IEEE 802.11 Wireless LAN devices. ACRONYMS H

This MIB module provides network management support for device VLAN configuration on IEEE 802.11 wireless LAN. ACRONYMS

This MIB module defines management objects for configuration and monitoring of Wireless Personal Area Network (WPAN). Personal Area Network (PAN) is a network for intercon

Cisco WRED MIB - Overview Cisco Weighted Random Early Detection/Drop is a method which avoids traffic congestion on an output interface. Congestion is detected by computing the avera

The World Wide Name (WWN) in the fibre channel networking technology is equivalent to the MAC address in Ethernet. There are six different types of WWNs defined in ANSI

The tables defined by this MIB module contain a collection of managed objects that are general in nature and apply to different types of modems. The structure of this module

The agent capabilities for CISCO-XGCP-MIB.

The capabilities description of CISCO-XGCP-EXT-MIB.

This MIB module is an extension to CISCO-XGCP-MIB. It defines the parameters related to the following aspects in xGCP protocols: * Default call control parameters i

This MIB is an enhancement for existing XGCP-MIB. xGCP is a set of protocols, for example SGCP (Simple Gateway Control Protocol) and MGCP (Media Gateway Control Protoco

The MIB module for the management of zoning within the framework of Cisco's Zoning Server (ZS) Archi- tecture which realizes the FC-GS4/SW3 requirements

The MIB module for the management of zoning within the framework of Cisco's Zoning Server (ZS) Archi- tecture which realizes the FC-GS3 requirements for

The collection of MIBs relating to Cisco ME1200

Added: rlCustom1BonjourServiceTable - the private MIB module definition for Bonjour services.

This private MIB module defines 3sw 2sw Tables private MIBs.

The private MIB module definition for Authentication, Authorization and Accounting in CISCOSB devices.

The private MIB module definition for Banner displays messages in Cisco switching devices. Banner allows users to configure display messages which are displayed on various authentication events. Banne

The private MIB module definition for Bonjour protocol.

This private MIB module defines Switching Parameters private MIBs.

The private MIB module definition for DHCP Snoop, ARP Inspection and Ip source Guard features.

This private MIB module defines bridge MIB objects private MIBs.

The private MIB module definition for baudrate.

This private MIB module defines CDB private MIBs.

The private MIB module definition for CDP protocol.

Remote CLI branch has been added.

Added field rlCopyInetSpecificCopyInfo

CPU Counter MIBs

This private MIB module is used for achieving extended debugging capablities for the device. For example: greater management capabilies for technical support users.

This private MIB module defines general Parameters private MIBs.

The private MIB module definition for DHCP server support in CISCOSB devices.

This private MIB module defines DHCP CL private MIBs.

The MIB module for configuring AAL2 profile elements. This table will be used in AAL2 switching and trunking applications.

The MIB module is defined to configure the Announcements feature on the Media Gateway Card. The Media Gateway Card will have the capability to play pre-recorded local announcements in switched VoIP so

This MIB is used for configuring/provisioning SPVCs on the ATM interfaces. This is used for ATM switch connection management. Terminologies used: GCRA - The Generic Cell Rate Algorithm(GCRA) is used t

This module contains ATM switch connection related real time statistical counter objects.

The MIB to manage CoS(Class of Service) queue/buffer related parameters. One or more virtual interfaces may exist on a physical interface or a channelized interface. Every virtual interface has certai

MIB module

The MIB module to configure the ATM Connections on a broad band interface in PXM1 Service module.

This MIB module contains ATM Connection related real time statistical counter objects. The ATM connections are applicable to PXM1 service module. in MGX82xx products. Logical Channel refers to ATM Con

The MIB module for ILMI configuration and ILMI statistics for broad band interface ports in PXM1 service module. PXM1 service module is supported in MGX82xx series products. The broadband interface re

The MIB module for configuration of ATM logical ports in PXM1 Service module in MGX82xx series. This MIB contains information on ATM Logical port statistics.

The MIB module to configure the Circuit Emulation connections in MGX82xx series products. Terminology: CES : Circuit Emulation Service. The CES defines a method of carrying a traffic from non-ATM tele

The MIB module to provide CES Connections statistics. This MIB is supported in Circuit Emulation Service Modules(CESM) in MGX82xx, MGX88xx products. The c

The MIB module to configure the Circuit Emulation Service(CES) ports.

The mib module to configure the resource partition on Circuit Emulation Service(CES) ports. This is applicable for service modules providing the Circuit Emulation Services.

This MIB provides configuration of Jitter buffer mode on a call and initial jitter delay value per Codec based. Prior to this, the configuration are specify on a Card based. The Card level objects vis

This MIB is used for configuring a port on an ATM switch module to be aware of feeder connection information. Terminology: AR - Auto Route, a CISCO proprietary feature, provides connection management

The Agent Capabilities for Frame Relay connection mib objects. - The capability cwFrConnCapabilityFrsm12V3R00 is for FRSM-12 module.

The MIB module to configure the Frame Relay connection configuration. Terminologies Used: SIW - Frame-Relay-to ATM Service Interworking. In SIW, the ATM port connected to a frame relay port does not n

The MIB module for frame relay connection statistics. Terminologies Used: SIW - Frame-Relay-to ATM Service Interworking FECN - Forward Explicit Congestion Notification. The FECN bit in Frame Relay hea

The Agent Capabilities for Frame Relay port mib objects. - The capability cwFrPortCapabilityFrsm12V3R00 is for FRSM-12 module.

The MIB module to create/configure frame relay ports/interfaces. This module contains tables related to frame relay port states and statistics. The frame relay logical port is referred to as 'frame re

The MIB module to configure the resource partition on Frame Relay Ports. Terminlogies used: LCN : Logical Connection Number. DLCI : Data Link Connection Identifier. A unique number assigned to a PVC e

The MIB module to configure LMI and CLLM on a frame relay ports. This mib module also contains objects to represent LMI and CLLM statistics information. The frame relay logical port is referred to as

The MIB module to configure X.21/HSSI physical and logical interfaces. This MIB module also contains alarm configuration of X.21 interfaces. Terminologies Used: HSSI : High Speed Serial Interface. The

The MIB module is defined for establishing a Trunk to transport PRI (Primary Rate Interface) signaling information over a RUDP (Reliable UDP) connection for CCS (Common Channel Signaling) VoIP(Voice O

The MIB module for managing Media Gateways (MGs). Terms used: MG: Media Gateway MGC: Media Gateway Controller MGCP: Media Gateway Control Protocol NE: Notified Entity RSIP: Restart In Progress (MGCP s

The MIB module for Media Gateways (MGs) to allow multiple Media Gateway Controllers (MGCs) to be configured and managed on the Gateway. MGCs can be group together as part of the same MGC redundancy gr

The Agent Capabilities for CISCO-WAN-MODULE-MIB. - The ciscoWanModuleCapabilityV2R00 is for ATM Switch Service Module(AXSM). - The ciscoWanModuleCapabilityV21R60 is for Enhanced ATM Switch Service Mod

The MIB module for configuring AutoRoute controller. The Portable AutoRoute(PAR) is a Controller providing routing capabilities in Network of Cisco MGX and BPX Switches. PAR controller performs follow

The MIB module for managing CA(Call Agent) events.

This MIB together with the CISCO-WAN-ATM-CONN-MIB support provisioning of PVC endpoints and SPVCs on the MGX's Route Processor Module (RPM).

The MIB module is defined for establishing connection between an endpoint and another endpoint on a remote VISM in the case of VoIP(Voice over IP) trunking application.

The MIB module to describe SONET/SDH interfaces objects. This is an extension to the standard SONET MIB(RFC 2558).

The MIB module for managing SRCP(Simple Resource Coordination Protocol) implementations. SRCP is a resource coordination protocol used between a MGC(Media Gateway Controller) and a MG(Media Gateway).

The MIB Module for BERT(Bit Error Rate Testing) using Service Resource Module(SRM). This MIB module is used for BERT on FRSM, AUSM, CESM, VISM modules. This module contains information on results from

The MIB module for configuration of bulk distribution (de-multiplexing of traffic from higher-bandwidth to lower-bandwidth interfaces). This is used for configuring bulk distribution of T3 interfaces

The MIB modules describe an ATM network service on a BPX-SES or a MGX ATM switch. This MIB module provides configuring, provisioning, as well as status gathering for ATM services. Abbreviation used: A

The MIB module for configuring T.38 fax relay protocol parameters. This MIB will be used in VoIP(Voice over IP) applications.

This MIB module is for Supporting Varbinds used only in trap defintions. The NMS applications should not depend on the implementation of these objects.The SNMP Requests(GET,GET-NEXT) may not be valid

The Agent Capabilities for CISCO-WAN-AAL2-PROFILES-MIB.

The Agent Capabilities for CISCO-WAN-ANNOUNCEMENT-MIB.

The Agent Capabilities for vismCasGrp.my .

The Agent Capabilities for CISCO-WAN-LAPD-TRUNK-MIB.

The Agent Capabilities for CISCO-WAN-MG-MIB.

The Agent Capabilities for CISCO-WAN-MGC-REDUN-MIB

The Agent Capabilities for CISCO-WAN-RTP-CONN-MIB.

The Agent Capabilities for CISCO-WAN-SRCP-MIB.

The Agent Capabilities for CISCO-WAN-T38-FAXRELAY-MIB.

The MIB module is defined to configure the programmable Tone Plan feature on VISM.

The Agent Capabilities for XGCP-MIB.