CBS-HARDWARE-MIB
This MIB module defines the objects to identify and monitor Crossbeam Systems hardware.
Main OID:
cbsHardwareMIB.1.3.6.1.4.1.6848.3.2
98
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
98 total| Object Name |
|---|
cbsHardware OBJECT IDENTIFIER .1.3.6.1.4.1.6848.2.1 |
cbsHwSystem OBJECT IDENTIFIER .1.3.6.1.4.1.6848.2.1.1 |
cbsHwSystemProductIDThe identifier for this systemro ProductID (HOST-RESOURCES-MIB) .1.3.6.1.4.1.6848.2.1.1.1 |
cbsHwSystemDescriptionA textual description of the product.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6848.2.1.1.2 |
cbsHwSystemSerialNumberThe serial number of the system.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6848.2.1.1.3 |
cbsHwSystemBackplaneRevisionThe Revision of the system backplane.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6848.2.1.1.4 |
cbsHwSystemStatus OBJECT IDENTIFIER .1.3.6.1.4.1.6848.2.1.2 |
cbsHwSystemRedundentPowerSupplyStatusIndicates that the redundent power supply is operational. This object is obsoleted in favor of separate objects for AC and DC power supply.roobsolete OperationalState .1.3.6.1.4.1.6848.2.1.2.1 |
cbsHwSystemRedundentPowerFeedStatusIndicates that both of the redundent backplane power feeds are operational. This object is obsoleted in favor of separate objects for AC and DC power feed.roobsolete OperationalState .1.3.6.1.4.1.6848.2.1.2.2 |
cbsHwSystemChassisTempThe temperature of the chassis air flow as measured at the upper fan tray.ro Integer32 (-25..50) .1.3.6.1.4.1.6848.2.1.2.3 |
cbsHwSystemUpperFanTrayThe upper fan tray is present in the system.ro ExistentialState .1.3.6.1.4.1.6848.2.1.2.4 |
cbsHwSystemLowerFanTrayThe lower fan tray is present in the system.ro ExistentialState .1.3.6.1.4.1.6848.2.1.2.5 |
cbsHwSystemAlarmIndicates the highest current alarm state of the system.ro Enumeration .1.3.6.1.4.1.6848.2.1.2.6 |
cbsHwSystemPowerTypeIndicates the power type of the system.ro Enumeration .1.3.6.1.4.1.6848.2.1.2.7 |
cbsHwSystemRedundentACPowerSupplyStatusIndicates that the redundent AC power supply is operational. Will return down (i.e. not-operational) for DC chassis.ro OperationalState .1.3.6.1.4.1.6848.2.1.2.8 |
cbsHwSystemRedundentACPowerFeedStatusIndicates that both of the redundent backplane AC power feeds are operational. Will return down (i.e. not-operational) for DC chassis.ro OperationalState .1.3.6.1.4.1.6848.2.1.2.9 |
cbsHwSystemDCPowerFilterAIndicates if DC power filter A is present or not present. Will return not present for AC chassis.ro ExistentialState .1.3.6.1.4.1.6848.2.1.2.10 |
cbsHwSystemDCPowerFilterBIndicates if DC power filter B is present or not present. Will return not present for AC chassis.ro ExistentialState .1.3.6.1.4.1.6848.2.1.2.11 |
cbsHwSystemDCPowerFeedAIndicates if DC power feed A is present or not present. Will return not present for AC chassis.ro ExistentialState .1.3.6.1.4.1.6848.2.1.2.12 |
cbsHwSystemDCPowerFeedBIndicates if DC power feed B is present or not present. Will return not present for AC chassis.ro ExistentialState .1.3.6.1.4.1.6848.2.1.2.13 |
cbsFanStatusTableThis table contains information about the fan trays currently installed in the system. SEQUENCE OF CbsFanStatusEntry .1.3.6.1.4.1.6848.2.1.3 |
cbsFanStatusEntryAn entry in the hardware module table. CbsFanStatusEntry .1.3.6.1.4.1.6848.2.1.3.1 |
cbsFanGroupIndexIndex of the fan tray. Enumeration .1.3.6.1.4.1.6848.2.1.3.1.1 |
cbsFanIndexThe fan number in the fan tray. INTEGER .1.3.6.1.4.1.6848.2.1.3.1.2 |
cbsFanStatusOperational status of the fan.ro OperationalState .1.3.6.1.4.1.6848.2.1.3.1.3 |
cbsHwModuleTableThis table contains information about the processor modules currently installed in the system. SEQUENCE OF CbsHwModuleEntry .1.3.6.1.4.1.6848.2.1.4 |
cbsHwModuleEntryAn entry in the hardware module table. CbsHwModuleEntry .1.3.6.1.4.1.6848.2.1.4.1 |
cbsHwModuleIDThe product ID for the module.ro Integer32 .1.3.6.1.4.1.6848.2.1.4.1.1 |
cbsHwModuleProductIDThe product ID for the module.ro ProductID (HOST-RESOURCES-MIB) .1.3.6.1.4.1.6848.2.1.4.1.2 |
cbsHwModuleDescriptionA short description of the module.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6848.2.1.4.1.3 |
cbsHwModuleBoardRevisionThe board revision level of the module.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6848.2.1.4.1.4 |
cbsHwModuleSerialNumberThe serial number of the module.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6848.2.1.4.1.5 |
cbsHwModuleBootStrapRevTotal static DRAM memory on the module in Kilobytes.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6848.2.1.4.1.6 |
cbsHwModuleBootloaderRevTotal static DRAM memory on the module in Kilobytes.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6848.2.1.4.1.7 |
cbsHwModuleDiagnosticsRevTotal static DRAM memory on the module in Kilobytes.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6848.2.1.4.1.8 |
cbsHwModuleSDRAMSizeTotal Static DRAM memory on the module in Kilobytes.ro KBytes (HOST-RESOURCES-MIB) .1.3.6.1.4.1.6848.2.1.4.1.9 |
cbsHwModuleRDRAMSizeTotal RDRAM memory on the module in Kilobytes.ro KBytes (HOST-RESOURCES-MIB) .1.3.6.1.4.1.6848.2.1.4.1.10 |
cbsHwModuleDiskAPresentThe first disk storage device is present.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6848.2.1.4.1.11 |
cbsHwModuleDiskBPresentThe second disk storage device is present.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6848.2.1.4.1.12 |
cbsHwModuleDuartAPresentThe first DUART device is present on the module.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6848.2.1.4.1.13 |
cbsHwModuleDuartBPresentThe second DUART device is present on the module.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6848.2.1.4.1.14 |
cbsHwModuleAccelCard1PresentThe Accelerator Card 1 is present on the module.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6848.2.1.4.1.15 |
cbsHwModuleAccelCard2PresentThe Accelerator Card 2 is present on the module.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6848.2.1.4.1.16 |
cbsHwComponentRevTableA table containing the revision level of programable hardware components. SEQUENCE OF CbsHwComponentRevEntry .1.3.6.1.4.1.6848.2.1.5 |
cbsHwComponentRevEntryAn entry in the hardware component revision table. CbsHwComponentRevEntry .1.3.6.1.4.1.6848.2.1.5.1 |
cbsHwComponentIndexDescription of the programable component Unsigned32 .1.3.6.1.4.1.6848.2.1.5.1.1 |
cbsHwComponentDescriptionDescription of the programable componentro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6848.2.1.5.1.2 |
cbsHwComponentRevisionRevision level of the programable componentro OCTET STRING .1.3.6.1.4.1.6848.2.1.5.1.3 |
cbsHwModuleStatusTableThis table contains the status of processor modules currently installed in the system. SEQUENCE OF CbsHwModuleStatusEntry .1.3.6.1.4.1.6848.2.1.6 |
cbsHwModuleStatusEntryAn entry in the hardware module status table. CbsHwModuleStatusEntry .1.3.6.1.4.1.6848.2.1.6.1 |
cbsHwModuleStatusThe operational state of the module unavailable - No status is currently available for this module. down - The module is currently down. initializing - The module is loading. up - The module is in an operational state. standby - The module is operating in standby mode. bootwait - The module is waiting for resources to become available so it can load software.ro Enumeration .1.3.6.1.4.1.6848.2.1.6.1.1 |
cbsHwModuleCpuTempThe current CPU temperature in degrees centigrade.ro Integer32 (-25..50) .1.3.6.1.4.1.6848.2.1.6.1.2 |
cbsHwModuleFPGATempThe current FPGA temperature in degrees centigrade.ro Integer32 (-25..75) .1.3.6.1.4.1.6848.2.1.6.1.3 |
cbsHwModuleInTempThe current temperature at the sensor located at the bottom of the board in degrees centigrade.ro Integer32 (-25..75) .1.3.6.1.4.1.6848.2.1.6.1.4 |
cbsHwModuleInTempAlarmIndicates a high temperature alarm for the bottom board sensor.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6848.2.1.6.1.5 |
cbsHwModuleExhaustTempThe current temperature at the sensor located at the top of the board in degrees centigrade.ro Integer32 (-25..75) .1.3.6.1.4.1.6848.2.1.6.1.6 |
cbsHwModuleExhaustTempAlarmIndicates a high temperature alarm for the top board sensor.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6848.2.1.6.1.7 |
cbsHwModuleCPUVoltageThe current voltage level of the processor supply. This number is in 1/100ths of a volt and the ideal value depends on the speed of the processor.ro Gauge32 .1.3.6.1.4.1.6848.2.1.6.1.8 |
cbsHwModule1_8VoltageThe current voltage level of the 1.8 volt power supply. This number is in 1/100ths of a volt and the ideal value of 1.8 volts will be read as 180.ro Gauge32 .1.3.6.1.4.1.6848.2.1.6.1.9 |
cbsHwModule3_3VoltageThe current voltage level of the 3.3 volt power supply. This number is in 1/100ths of a volt and the ideal value of 3.3 volts will be read as 330.ro Gauge32 .1.3.6.1.4.1.6848.2.1.6.1.10 |
cbsHwModule2_5VoltageThe current voltage level of the 2.5 volt power supply. This number is in 1/100ths of a volt and the ideal value of 2.5 volts will be read as 250.ro Gauge32 .1.3.6.1.4.1.6848.2.1.6.1.11 |
cbsHwModuleControlLinkAThe operation state of control link A.ro OperationalState .1.3.6.1.4.1.6848.2.1.6.1.12 |
cbsHwModuleControlLinkBThe Operational state of control link B.ro OperationalState .1.3.6.1.4.1.6848.2.1.6.1.13 |
cbsHwModuleActiveLEDIndicates the board's active LED is on.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6848.2.1.6.1.14 |
cbsHwModuleStandbyLEDIndicates the board's standby LED is on.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6848.2.1.6.1.15 |
cbsHwModuleFailedLEDIndicates the board's failed LED is on.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6848.2.1.6.1.16 |
cbsHwModuleCpu2TempFor dual processor modules, 2nd CPU's current temperature in degrees centigrade. For modules that don't support it, a special invalid value of 10000 will be returned.ro Integer32 (-25..50) .1.3.6.1.4.1.6848.2.1.6.1.17 |
cbsHwModuleCPU2VoltageFor dual processor modules, 2nd CPU's current voltage level. This number is in 1/100ths of a volt and the ideal value depends on the speed of the processor. For modules that don't support it, a special invalid value of 10000 will be returned.ro Gauge32 .1.3.6.1.4.1.6848.2.1.6.1.18 |
cbsHwModuleFPGA1_8VoltageFPGA's current voltage level of the 1.8 volt power supply. This number is in 1/100ths of a volt and the ideal value of 1.8 volts will be read as 180. For modules that don't support it, a special invalid value of 10000 will be returned.ro Gauge32 .1.3.6.1.4.1.6848.2.1.6.1.19 |
cbsHwModule125VoltageCurrent voltage level of the 1.25 volt power supply. This number is in 1/100ths of a volt and the ideal value of 1.25 volts will be read as 125. For modules that don't support it, a special invalid value of 10000 will be returned.ro Gauge32 .1.3.6.1.4.1.6848.2.1.6.1.20 |
cbsHwSdpStatusTableTable containing status of the Switched Data Path backplane links. SEQUENCE OF CbsHwSdpStatusEntry .1.3.6.1.4.1.6848.2.1.7 |
cbsHwSdpStatusEntryAn entry in the hardware SDP status table. CbsHwSdpStatusEntry .1.3.6.1.4.1.6848.2.1.7.1 |
cbsHwSdpNpmSlotThe slot number of the Network Processor Module end of the link Unsigned32 .1.3.6.1.4.1.6848.2.1.7.1.1 |
cbsHwSdpRemoteSlotThe slot number of the remote end of the link Unsigned32 .1.3.6.1.4.1.6848.2.1.7.1.2 |
cbsHwSdpNpmStateThe operational state of the NPM side of the link.ro OperationalState .1.3.6.1.4.1.6848.2.1.7.1.3 |
cbsHwSdpRemoteStateThe operational state of the remote end of the link.ro OperationalState .1.3.6.1.4.1.6848.2.1.7.1.4 |
cbsHardwareMIBThis MIB module defines the objects to identify and monitor Crossbeam Systems hardware. MODULE-IDENTITY .1.3.6.1.4.1.6848.3.2 |
cbsHwTraps OBJECT IDENTIFIER .1.3.6.1.4.1.6848.4.1 |
cbsHwPowerSupplyFailedOne of the redundent power supplies or DC filters has failed or been removed. NOTIFICATION-TYPE .1.3.6.1.4.1.6848.4.1.1 |
cbsHwPowerSupplyRecoveredA redundent power supply or DC filter that was previously failed or missing has been replaced. NOTIFICATION-TYPE .1.3.6.1.4.1.6848.4.1.2 |
cbsHwPowerFeedFailedOne of the redundent backplane power feed has failed. NOTIFICATION-TYPE .1.3.6.1.4.1.6848.4.1.3 |
cbsHwPowerFeedRecoveredOne of the redundent backplane power feed that previously not working has become operational. NOTIFICATION-TYPE .1.3.6.1.4.1.6848.4.1.4 |
cbsHwUpperFanTrayInsertedA fan tray has been inserted into the system. NOTIFICATION-TYPE .1.3.6.1.4.1.6848.4.1.5 |
cbsHwUpperFanTrayRemovedA fan tray has been removed from the system. NOTIFICATION-TYPE .1.3.6.1.4.1.6848.4.1.6 |
cbsHwLowerFanTrayInsertedA fan tray has been inserted into the system. NOTIFICATION-TYPE .1.3.6.1.4.1.6848.4.1.7 |
cbsHwLowerFanTrayRemovedA fan tray has been removed from the system. NOTIFICATION-TYPE .1.3.6.1.4.1.6848.4.1.8 |
cbsHwFanFailedOne of the system cooling fans has failed. NOTIFICATION-TYPE .1.3.6.1.4.1.6848.4.1.9 |
cbsHwFanRecoveredA Fan that was inoperative has recovered. NOTIFICATION-TYPE .1.3.6.1.4.1.6848.4.1.10 |
cbsHwSystemAlarmTrapIndicates that the alarm state of the system has changed. NOTIFICATION-TYPE .1.3.6.1.4.1.6848.4.1.11 |
cbsHwChassisTempExceededIndicates the the chassis temperature, as measure at the exhaust fan has exceeded the maximum. NOTIFICATION-TYPE .1.3.6.1.4.1.6848.4.1.12 |
cbsHwChassisTempNormalIndicates the the chassis temperature, as measure at the exhaust fan has returned to normal. NOTIFICATION-TYPE .1.3.6.1.4.1.6848.4.1.13 |
cbsHwModuleStatusChangedThe status of a processor module has changed, the new status of the module that has changed is reported. NOTIFICATION-TYPE .1.3.6.1.4.1.6848.4.1.14 |
cbsHwModuleInsertedA processor module been inserted into the system, reports the slot number of the module that has been inserted. NOTIFICATION-TYPE .1.3.6.1.4.1.6848.4.1.15 |
cbsHwModuleRemovedA processor module been removed into the system, reports the slot number of the module that has been removed. NOTIFICATION-TYPE .1.3.6.1.4.1.6848.4.1.16 |
cbsModuleTempExceededIndicates that the module CPU temperature has execeeded the high limit. NOTIFICATION-TYPE .1.3.6.1.4.1.6848.4.1.17 |
cbsModuleTempNormalIndicates that the module CPU temperature has returned to the normal operating range. NOTIFICATION-TYPE .1.3.6.1.4.1.6848.4.1.18 |
cbsDbhaLinkUpThe DBHA link on this CPM has come up. NOTIFICATION-TYPE .1.3.6.1.4.1.6848.4.1.19 |
cbsDbhaLinkDownThe DBHA link on this CPM has failed. NOTIFICATION-TYPE .1.3.6.1.4.1.6848.4.1.20 |