CBS-VRRP-MIB
XOS, Release 9.5: This MIB module defines the objects related to Crossbeam VRRP Traps.
Main OID:
cbsVrrpMIB.1.3.6.1.4.1.6848.3.5
62
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
62 total| Object Name |
|---|
cbsVrrp OBJECT IDENTIFIER .1.3.6.1.4.1.6848.2.5 |
cbsVrrpOperations OBJECT IDENTIFIER .1.3.6.1.4.1.6848.2.5.1 |
cbsVrrpTrapNewMasterReasonThis indicates the reason for NewMaster trap.
Used by cbsVrrpTrapNewMaster trap.ro Enumeration .1.3.6.1.4.1.6848.2.5.1.1 |
cbsVrrpTrapNewMasterFailGrNameThis object contains the VRRP Failover Group
name. Used by cbsVrrpTrapNewMaster trap.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6848.2.5.1.2 |
cbsVrrpTrapNewMasterVrIdThis object contains the Virtual Router Identifier (VRID).
Used by cbsVrrpTrapNewMaster trap.ro Integer32 .1.3.6.1.4.1.6848.2.5.1.3 |
cbsVrrpTrapNewMasterCirIdThis object contains the circuit ID.
Used by cbsVrrpTrapNewMaster trap.ro Integer32 .1.3.6.1.4.1.6848.2.5.1.4 |
cbsVrrpTrapNewMasterCirNameThis object contains the circuit name.
Used by cbsVrrpTrapNewMaster trap.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6848.2.5.1.5 |
cbsVrrpTrapProtoErrReasonThis indicates the reason for protocol error trap.
Used by cbsVrrpTrapProtoError trap.ro Enumeration .1.3.6.1.4.1.6848.2.5.1.6 |
cbsVrrpTrapFailGrOldStatusThe old status for the failover group.ro FailGroupStatus .1.3.6.1.4.1.6848.2.5.1.7 |
cbsVrrpTrapFailGrNewStatusThe new status for the failover group.ro FailGroupStatus .1.3.6.1.4.1.6848.2.5.1.8 |
cbsVrrpTrapFailGrStatusChgReasonIndicates the reason of the status changed, e.g.
1. Down
2. Down
3. Down
4. Down
5. Down
6. Master
7. Master
8. Master
9. Master
10. Master
11. Backup
12. Backup
13. Backup
14. Backup
15. Backup
16. Backupro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6848.2.5.1.9 |
cbsVrrpTrapFailGrOldPriorityThe failover group's old actual priority.ro Integer32 .1.3.6.1.4.1.6848.2.5.1.10 |
cbsVrrpTrapFailGrNewPriorityThe failover group's new actual priority.ro Integer32 .1.3.6.1.4.1.6848.2.5.1.11 |
cbsVrrpTrapFailGrPriorityChgReasonThis indicates the reason for PriorityChanged trap.
Used by cbsVrrpTrapFailGrPriorityChanged trap.
configured - configured priority changed
vrDown - failover group down due to deleted/disabled or invalid configuration
vrUp - failover group up due to becoming enable or valid
virtualRouter - priority delta of involved virtual router changed
verifyNextHop - priority delta of involved nexthop changed
monitorCircuit - priority delta of involved monitored circuit changed
monitorInterface - priority delta of involved monitored interface changed
monitorGroupInterface - priority delta of involved monitored group interface changed
activeVapThreshold - priority delta of involved active vap changedro Enumeration .1.3.6.1.4.1.6848.2.5.1.12 |
cbsVrrpTrapRemoteBoxPathOldStatusOld status of the specified path of remote box.ro RemoteBoxPathStatus .1.3.6.1.4.1.6848.2.5.1.13 |
cbsVrrpTrapRemoteBoxPathNewStatusNew status of the specified path of remote box.ro RemoteBoxPathStatus .1.3.6.1.4.1.6848.2.5.1.14 |
cbsVrrpRemBoxPathAddrsAll paths' IP addresses of the remote box, they are separated
by comma.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6848.2.5.1.15 |
cbsVrrpFailGrTableThis table contains information about the VRRP failover groups. SEQUENCE OF CbsVrrpFailGrEntry .1.3.6.1.4.1.6848.2.5.2 |
cbsVrrpFailGrEntryAn entry in the failover group table. CbsVrrpFailGrEntry .1.3.6.1.4.1.6848.2.5.2.1 |
cbsVrrpFailGrIDThe unique Group ID for the failover group.ro Integer32 .1.3.6.1.4.1.6848.2.5.2.1.1 |
cbsVrrpFailGrNameThe name for the failover group.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6848.2.5.2.1.2 |
cbsVrrpFailGrStatusThe status for the failover group.ro FailGroupStatus .1.3.6.1.4.1.6848.2.5.2.1.3 |
cbsVrrpFailGrConfigPriorityThe configured priority for the failover group.ro Integer32 .1.3.6.1.4.1.6848.2.5.2.1.4 |
cbsVrrpFailGrActualPriorityThe actual priority for the failover group.ro Integer32 .1.3.6.1.4.1.6848.2.5.2.1.5 |
cbsVrrpFailGrEnabledSpecifies if failover group is enabled or not.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6848.2.5.2.1.6 |
cbsVrrpFailGrPreemptionSpecifies preemption for the failover group is off or on.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6848.2.5.2.1.7 |
cbsVrrpFailGrLastChangeTimeIndicates the elapsed time since the status last changed.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.6848.2.5.2.1.8 |
cbsVrrpFailGrLastChangeReasonIndicates the reason of the status last changed, e.g.
1. Down
2. Down
3. Down
4. Down
5. Down
6. Master
7. Master
8. Master
9. Master
10. Master
11. Backup
12. Backup
13. Backup
14. Backup
15. Backup
16. Backupro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6848.2.5.2.1.9 |
cbsVrrpFailGrMasterSysIDThe system ID of the platform that is operating as the master of this
failover group.ro Integer32 .1.3.6.1.4.1.6848.2.5.2.1.10 |
cbsVrrpFailGrMasterPriorityThe master failover group's actual priority.ro Integer32 .1.3.6.1.4.1.6848.2.5.2.1.11 |
cbsVrrpFailGrCompTableThis table contains information about the components of VRRP
failover groups SEQUENCE OF CbsVrrpFailGrCompEntry .1.3.6.1.4.1.6848.2.5.3 |
cbsVrrpFailGrCompEntryAn entry in the VRRP failover group component table. CbsVrrpFailGrCompEntry .1.3.6.1.4.1.6848.2.5.3.1 |
cbsVrrpFailGroupIDThe ID of the VRRP failover group.ro Integer32 .1.3.6.1.4.1.6848.2.5.3.1.1 |
cbsVrrpFailGroupNameThe name of the VRRP failover group.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6848.2.5.3.1.2 |
cbsVrrpFailGrCompIndexThe index for the component.ro Integer32 .1.3.6.1.4.1.6848.2.5.3.1.3 |
cbsVrrpFailGrCompTypeThe type of the component.ro Enumeration .1.3.6.1.4.1.6848.2.5.3.1.4 |
cbsVrrpFailGrCompDescrThe detailed description about the component,
the format depend on the type of the component, e.g.:
vr - virtual router circuit name/virtual router id/OSPF cost increment
mc - monitored circuit name
mi - monitored interface
mg - monitored group interface
vg - vap group (active-vap-threshold)
nh - verify-next-hop IP/virtual router IDro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6848.2.5.3.1.5 |
cbsVrrpFailGrCompDeltaThe vrrp component's configured priority delta as well as
information about its usage:
10 : priority delta of a component configured as 10
failover group priority NOT decremented by
this delta (no failure)
-10: priority delta of a component configured as 10
failover group priority decremented by this
delta (component failure)
10* or -10*: unknown next hop statusro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6848.2.5.3.1.6 |
cbsVrrpRemoteBoxPathTableThis table contains information about the path of VRRP
remote box SEQUENCE OF CbsVrrpRemoteBoxPathEntry .1.3.6.1.4.1.6848.2.5.4 |
cbsVrrpRemoteBoxPathEntryAn entry in the VRRP remote box path table. CbsVrrpRemoteBoxPathEntry .1.3.6.1.4.1.6848.2.5.4.1 |
cbsVrrpRemoteBoxIDThe system ID of the VRRP remote box.ro Integer32 .1.3.6.1.4.1.6848.2.5.4.1.1 |
cbsVrrpRemoteBoxPathIndexThe index for path of VRRP remote box.ro Integer32 .1.3.6.1.4.1.6848.2.5.4.1.2 |
cbsVrrpRemoteBoxPathAddrThe path's IP address of the VRRP remote box.ro IpAddress .1.3.6.1.4.1.6848.2.5.4.1.3 |
cbsVrrpRemoteBoxPathLocalIntfThe path's IP address can be reachable via this local
interface.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6848.2.5.4.1.4 |
cbsVrrpRemoteBoxPathLocalAddrThe IP address of the local interface.ro IpAddress .1.3.6.1.4.1.6848.2.5.4.1.5 |
cbsVrrpRemoteBoxPathStatusThe path's status of the VRRP remote box.ro RemoteBoxPathStatus .1.3.6.1.4.1.6848.2.5.4.1.6 |
cbsVrrpRemoteBoxPathLastChangeTimeIndicates the elapsed time since the status last changed.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.6848.2.5.4.1.7 |
cbsVrrpRemoteBoxPathLinkQualityThe link quality of the remote box path.ro Gauge32 .1.3.6.1.4.1.6848.2.5.4.1.8 |
cbsVrrpMIBXOS, Release 9.5: This MIB module defines the objects
related to Crossbeam VRRP Traps. MODULE-IDENTITY .1.3.6.1.4.1.6848.3.5 |
cbsVrrpTraps OBJECT IDENTIFIER .1.3.6.1.4.1.6848.4.4 |
cbsVrrpTrapNewMasterThe newMaster trap indicates that the sending agent
transitioned to 'Master' state. NOTIFICATION-TYPE .1.3.6.1.4.1.6848.4.4.1 |
cbsVrrpTrapProtoErrorThe error trap indicates that the sending agent
encountered the protocol error indicated by
vrrpTrapProtoErrorReason. NOTIFICATION-TYPE .1.3.6.1.4.1.6848.4.4.2 |
cbsVrrpTrapFailGrStatusChangedThe StatusChanged trap indicates that failover group of
the sending agent transitioned from old to new state. NOTIFICATION-TYPE .1.3.6.1.4.1.6848.4.4.3 |
cbsVrrpTrapFailGrPriorityChangedThe PriorityChanged trap indicates that priority of
the sending agent's failover group changed. NOTIFICATION-TYPE .1.3.6.1.4.1.6848.4.4.4 |
cbsVrrpTrapRemoteBoxPathStatusChangedThe StatusChanged trap indicates that one path of
remote box on the sending agent's transitioned from
old to new state. NOTIFICATION-TYPE .1.3.6.1.4.1.6848.4.4.5 |
cbsVrrpTrapRemoteBoxNoActivePathThe trap indicates that there is no active path for the
remote box. NOTIFICATION-TYPE .1.3.6.1.4.1.6848.4.4.6 |
cbsVrrpTrapRemoteBoxNoSecondaryPathThe trap indicates that there is no secondary path for the
remote box that contains 2 CPMs. NOTIFICATION-TYPE .1.3.6.1.4.1.6848.4.4.7 |
cbsVrrpTrapRemoteBoxNoStandbyPathThe trap indicates that there is 1 active path but no standby
path for the remote box. NOTIFICATION-TYPE .1.3.6.1.4.1.6848.4.4.8 |
cbsVrrpTrapRemoteBoxPathSharedIntfThe trap indicates that all paths of the
remote box only are reachable via single local interface
on the sending agent. NOTIFICATION-TYPE .1.3.6.1.4.1.6848.4.4.9 |
cbsVrrpTrapNoRemoteBoxConfiguredThe trap indicates that VRRP configured but there is no
remote box configured. NOTIFICATION-TYPE .1.3.6.1.4.1.6848.4.4.10 |
cbsVrrpTrapOnlyOnePathDefinedThe trap indicates that the remote box configured with only
one path. NOTIFICATION-TYPE .1.3.6.1.4.1.6848.4.4.11 |
cbsVrrpTrapRemoteBoxRunLegacyXOSThe trap indicates that the remote box is running legacy XOS. NOTIFICATION-TYPE .1.3.6.1.4.1.6848.4.4.12 |