CBS-VAPGROUP-MIB
AI MIB Summary
The CBS-VAPGROUP-MIB module enables SNMP-based monitoring and configuration of Virtual Access Point (VAP) entities and their aggregation groups within Extreme Networks XOS 9.5 firmware. It provides granular visibility into VAP operational states, group membership parameters, and associated traffic statistics for wireless network management.
XOS, Release 9.5: This MIB module defines the objects related to VAPs and VAP groups.
Main OID:
cbsVapGroupsMIB.1.3.6.1.4.1.6848.3.4
30
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
30 total| Object Name |
|---|
cbsVapGroups OBJECT IDENTIFIER .1.3.6.1.4.1.6848.2.4 |
cbsVapGroupTableThis table contains information about the VAP groups. SEQUENCE OF CbsVapGroupEntry .1.3.6.1.4.1.6848.2.4.1 |
cbsVapGroupEntryAn entry in the VAP group table. CbsVapGroupEntry .1.3.6.1.4.1.6848.2.4.1.1 |
cbsVgVapGroupIDThe unique Group ID for the VAP group.ro Integer32 .1.3.6.1.4.1.6848.2.4.1.1.1 |
cbsVgVapGroupNameThe VAP group namero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6848.2.4.1.1.2 |
cbsVgLoadPriorityDefines relative priority while loading VAPs to hardware modules.ro Integer32 .1.3.6.1.4.1.6848.2.4.1.1.3 |
cbsVgPreempPriorityIf this VAP group requires additional APMs to load its VAPs, this priority is used to determine if APMs can be taken from another group. If the preemption priority for this group is higher than the load priority for a currently running VAP, that VAP is thrown out and this VAP is loaded instead. A zero value sets the lowest priority level.ro Integer32 .1.3.6.1.4.1.6848.2.4.1.1.4 |
cbsVgApmListThe APMs that are potentially assigned to support this VAP group.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6848.2.4.1.1.5 |
cbsVgVapCountThe number of VAPs to load in this group.ro Integer32 .1.3.6.1.4.1.6848.2.4.1.1.6 |
cbsVgMaxLoadCountThe maximum number of VAPs in this group.ro Integer32 .1.3.6.1.4.1.6848.2.4.1.1.7 |
cbsVgLBListThe list of VAPs to be load balanced.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6848.2.4.1.1.8 |
cbsVgBackUpModeSpecifies how to perform a backup in case an APM fails. None - no backup Pair - VAPs are paired to provide backup functionality Group - all VAPs in the group back up each other.ro Enumeration .1.3.6.1.4.1.6848.2.4.1.1.9 |
cbsVgIpForwardSpecifies if IP forwarding is enabled or not.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6848.2.4.1.1.10 |
cbsVgRpFilterSpecifies if RP filter is enabled or not.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6848.2.4.1.1.11 |
cbsVgLogMartiansSpecifies if log martians is enabled or not.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6848.2.4.1.1.12 |
cbsVgReloadTimerSpecifies the timeout for reloading this VAP group.ro Integer32 .1.3.6.1.4.1.6848.2.4.1.1.13 |
cbsVgRemoteBoxBackupSpecifies if failover of this VAP group to a remote system is enabled or not.roobsolete TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6848.2.4.1.1.14 |
cbsVgDelayFlowSpecifies the delay time, in seconds, after the VAP has come up before starting to load balance traffic to this VAP.ro Integer32 .1.3.6.1.4.1.6848.2.4.1.1.15 |
cbsVgIpv6ForwardSpecifies if IPv6 forwarding is enabled or not.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6848.2.4.1.1.16 |
cbsVapMappingTableThis table contains information about how the individual VAPs are mapped to hardware modules. SEQUENCE OF CbsVapMappingEntry .1.3.6.1.4.1.6848.2.4.2 |
cbsVapMappingEntryAn entry in the vap mapping table. CbsVapMappingEntry .1.3.6.1.4.1.6848.2.4.2.1 |
cbsVmVapGroupIDThe VAP group ID.ro Integer32 .1.3.6.1.4.1.6848.2.4.2.1.1 |
cbsVmVapGroupNameThe VAP group namero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6848.2.4.2.1.2 |
cbsVmVapNameThe VAP name, i.e. cbsVmVapGroupName-cbsVmVapIndexro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6848.2.4.2.1.3 |
cbsVmVapIndexUnique index value of a specific VAP within the VAP group.ro Integer32 .1.3.6.1.4.1.6848.2.4.2.1.4 |
cbsVmVapStatusThe current operational status of the VAP.ro ModuleState .1.3.6.1.4.1.6848.2.4.2.1.5 |
cbsVmSlotNumberThe hardware module ID (slot number) that this VAP is currently mapped to.ro Integer32 .1.3.6.1.4.1.6848.2.4.2.1.6 |
cbsVapGroupsMIBXOS, Release 9.5: This MIB module defines the objects related to VAPs and VAP groups. MODULE-IDENTITY .1.3.6.1.4.1.6848.3.4 |
cbsVapGroupsTraps OBJECT IDENTIFIER .1.3.6.1.4.1.6848.4.3 |
cbsVapStatusChangedThe VAP status for the given VAP changed. NOTIFICATION-TYPE .1.3.6.1.4.1.6848.4.3.1 |