ACD-SA-MIB
AI MIB Summary
The ACD-SA-MIB module provides SNMP access to the Service Availability database on Accedian Networks devices, exposing real-time performance metrics such as latency, jitter, packet loss, and availability statistics for active network paths. This data enables precise monitoring of end-to-end service quality and fault detection within the infrastructure.
The Service Availability database for this Accedian Networks device.
Main OID:
acdSa.1.3.6.1.4.1.22420.2.12
98
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
98 total| Object Name |
|---|
acdSaThe Service Availability database for this Accedian Networks device. MODULE-IDENTITY .1.3.6.1.4.1.22420.2.12 |
acdSaNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.22420.2.12.0 |
acdSaMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.22420.2.12.1 |
acdSaConfig OBJECT IDENTIFIER .1.3.6.1.4.1.22420.2.12.1.1 |
acdSaServiceConfigTableThis table contains all instance of service availability of this unit. SEQUENCE OF AcdSaServiceConfigEntry .1.3.6.1.4.1.22420.2.12.1.1.1 |
acdSaServiceConfigEntryAn entry consisting of all settings for a Service. AcdSaServiceConfigEntry .1.3.6.1.4.1.22420.2.12.1.1.1.1 |
acdSaServiceIndexUnique value for each service instance. Unsigned32 .1.3.6.1.4.1.22420.2.12.1.1.1.1.1 |
acdSaServiceConfigRowStatusAll columns must have a valid value before a row can be activated. To create a new Service you shall provide a unique name for an empty row with the RowStatus set to Create and Go.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.22420.2.12.1.1.1.1.2 |
acdSaServiceConfigNameA unique name used to identify the Service.rw DisplayString .1.3.6.1.4.1.22420.2.12.1.1.1.1.3 |
acdSaServiceConfigAdminStateAdministrative state is(1) or oos(2).rw AcdSaAdminStateFlag .1.3.6.1.4.1.22420.2.12.1.1.1.1.4 |
acdSaServiceConfigReportingPeriodA reporting period over which availability counters are evaluated in addition to the monotonic counters (In minutes).rw Unsigned32 (1 .. 1440) .1.3.6.1.4.1.22420.2.12.1.1.1.1.5 |
acdSaServiceConfigUaWindowSizeThe number of consecutive seconds over which to assess unavailability.rw Unsigned32 (1 .. 1000) .1.3.6.1.4.1.22420.2.12.1.1.1.1.6 |
acdSaServiceConfigHliWindowSizeThe number of consecutive Time Intervals used to assess High Loss Intervals for this instance.rw Unsigned32 (1 .. 999) .1.3.6.1.4.1.22420.2.12.1.1.1.1.7 |
acdSaServiceConfigTimeIntervalThe interval of time during which the metric is evaluated. Allowed values are 1, 5, 10, 20, or 60.rw Unsigned32 (1 .. 60) .1.3.6.1.4.1.22420.2.12.1.1.1.1.8 |
acdSaMetricConfigTableThe ..... SEQUENCE OF AcdSaMetricConfigEntry .1.3.6.1.4.1.22420.2.12.1.1.2 |
acdSaMetricConfigEntryAn entry consisting of all settings for a Metric. AcdSaMetricConfigEntry .1.3.6.1.4.1.22420.2.12.1.1.2.1 |
acdSaMetricIndexIndex for each metric instance. Unsigned32 .1.3.6.1.4.1.22420.2.12.1.1.2.1.1 |
acdSaMetricConfigRowStatusAll columns must have a valid value before a row can be activated. To create a new Service you shall provide the a unique name for an empty row with the RowStatus set to Create and Go. To delete the VLAN set you need to set the RowStatus to destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.22420.2.12.1.1.2.1.2 |
acdSaMetricConfigNameA unique name used to identify the Metric.rw DisplayString .1.3.6.1.4.1.22420.2.12.1.1.2.1.3 |
acdSaMetricConfigSrcNameA unique name used to identify the source metric.rw DisplayString .1.3.6.1.4.1.22420.2.12.1.1.2.1.4 |
acdSaMetricConfigTypeEnable or disable the Service Availability entry.rw AcdSaMetricType .1.3.6.1.4.1.22420.2.12.1.1.2.1.5 |
acdSaMetricConfigThresholdIndicates the delay threshold for this metric when type is one of metric delay parameters (in micro-seconds). Indicates the packet loss threshold for this metric when type is one of packet-loss parameter expressed in millionth of percent (1,000,000 is 1%).rw Unsigned32 .1.3.6.1.4.1.22420.2.12.1.1.2.1.6 |
acdSaCounter OBJECT IDENTIFIER .1.3.6.1.4.1.22420.2.12.1.2 |
acdSaServiceCounterTableThis table contains all instance of service availability of this unit. SEQUENCE OF AcdSaServiceCounterEntry .1.3.6.1.4.1.22420.2.12.1.2.1 |
acdSaServiceCounterEntryAn entry consisting of all counters for a Service. AcdSaServiceCounterEntry .1.3.6.1.4.1.22420.2.12.1.2.1.1 |
acdSaServiceCounterPeriodIndexAn index that uniquely identifies the particular sample this entry represents among all samples associated with the same service instance. This index starts at 1 and increases by one as each new period.ro Unsigned32 .1.3.6.1.4.1.22420.2.12.1.2.1.1.1 |
acdSaServiceCounterValidFlagIndicates the validity of the service counter during this sampling interval.ro AcdSaValidFlag .1.3.6.1.4.1.22420.2.12.1.2.1.1.2 |
acdSaServiceCounterUpTimeUptime is a measure of the time a service has been up during this sampling interval.ro Unsigned32 .1.3.6.1.4.1.22420.2.12.1.2.1.1.3 |
acdSaServiceCounterUaTimeThe UaTime is a measure of the time a service has been unavailable during this sampling interval.ro Unsigned32 .1.3.6.1.4.1.22420.2.12.1.2.1.1.4 |
acdSaServiceCounterMaintTimeThe MaintTime is a measure of the time a service has been in maintenance during this sampling interval.ro Unsigned32 .1.3.6.1.4.1.22420.2.12.1.2.1.1.5 |
acdSaServiceCounterAvailRatioIndicates the availability ratio in millionth of a percent (1,000,000 is 1%).ro Unsigned32 .1.3.6.1.4.1.22420.2.12.1.2.1.1.6 |
acdSaServiceCounterGapsThe gap shall be the number of time the state change from available to unavailable.ro Unsigned32 .1.3.6.1.4.1.22420.2.12.1.2.1.1.7 |
acdSaServiceCounterLargestGapThe largest gap shall be the largest number of consecutive unavailable second.ro Unsigned32 .1.3.6.1.4.1.22420.2.12.1.2.1.1.8 |
acdSaServiceCounterChliTimeThe CHLI time is a counter which increments for every high loss interval. It is only reset to zero when one of the following conditions occur: 1) device reboot 2) explicit counter reset.ro Unsigned32 .1.3.6.1.4.1.22420.2.12.1.2.1.1.9 |
acdSaServiceCounterChliRatioThe ratio of high loss intervals divided by the uptime minus the sum of maintenance time and unavailable time, expressed in millionth of a percent (1,000,000 is 1%).ro Unsigned32 .1.3.6.1.4.1.22420.2.12.1.2.1.1.10 |
acdSaServiceHistCounterTableThis table contains all instance of service availability of this unit. SEQUENCE OF AcdSaServiceHistCounterEntry .1.3.6.1.4.1.22420.2.12.1.2.2 |
acdSaServiceHistCounterEntryAn entry consisting of all counters for a Service. AcdSaServiceHistCounterEntry .1.3.6.1.4.1.22420.2.12.1.2.2.1 |
acdSaServiceHistCounterPeriodIndexAn index that uniquely identifies the particular sample this entry represents among all samples associated with the same service instance. This index starts at 1 and increases by one as each new period. Unsigned32 .1.3.6.1.4.1.22420.2.12.1.2.2.1.1 |
acdSaServiceHistCounterIntervalEndThis is the time of the end of this entry.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.22420.2.12.1.2.2.1.2 |
acdSaServiceHistCounterValidFlagIndicates the validity of the service counter during this sampling interval.ro AcdSaValidFlag .1.3.6.1.4.1.22420.2.12.1.2.2.1.3 |
acdSaServiceHistCounterUpTimeUptime is a measure of the time a service has been up during this sampling interval.ro Unsigned32 .1.3.6.1.4.1.22420.2.12.1.2.2.1.4 |
acdSaServiceHistCounterUaTimeThe UaTime is a measure of the time a service has been unavailable during this sampling interval.ro Unsigned32 .1.3.6.1.4.1.22420.2.12.1.2.2.1.5 |
acdSaServiceHistCounterMaintTimeThe MaintTime is a measure of the time a service has been in maintenance during this sampling interval.ro Unsigned32 .1.3.6.1.4.1.22420.2.12.1.2.2.1.6 |
acdSaServiceHistCounterAvailRatioIndicates the availability ratio in millionth of a percent (1,000,000 is 1%).ro Unsigned32 .1.3.6.1.4.1.22420.2.12.1.2.2.1.7 |
acdSaServiceHistCounterGapsThe gap shall be the number of time the state change from available to unavailable.ro Unsigned32 .1.3.6.1.4.1.22420.2.12.1.2.2.1.8 |
acdSaServiceHistCounterLargestGapThe largest gap shall be the largest number of consecutive unavailable second.ro Unsigned32 .1.3.6.1.4.1.22420.2.12.1.2.2.1.9 |
acdSaServiceHistCounterChliTimeThe CHLI time is a counter which increments for every High Loss Interval. It is only reset to zero when one of the following conditions occur: 1) device reboot 2) explicit counter reset.ro Unsigned32 .1.3.6.1.4.1.22420.2.12.1.2.2.1.10 |
acdSaServiceHistCounterChliRatioThe ratio of high loss intervals divided by the uptime minus the sum of maintenance time and unavailable time, expressed in millionth of a percent (1,000,000 is 1%).ro Unsigned32 .1.3.6.1.4.1.22420.2.12.1.2.2.1.11 |
acdSaServiceMonoCounterTableThis table contains all instance of service availability of this unit. SEQUENCE OF AcdSaServiceMonoCounterEntry .1.3.6.1.4.1.22420.2.12.1.2.3 |
acdSaServiceMonoCounterEntryAn entry consisting of all monotonic counters for a Service. AcdSaServiceMonoCounterEntry .1.3.6.1.4.1.22420.2.12.1.2.3.1 |
acdSaServiceMonoCounterValidFlagIndicates the validity of the service counter during this sampling interval.ro AcdSaValidFlag .1.3.6.1.4.1.22420.2.12.1.2.3.1.1 |
acdSaServiceMonoCounterUpTimeUptime is a measure of the time a service has been up during this sampling interval.ro Unsigned32 .1.3.6.1.4.1.22420.2.12.1.2.3.1.2 |
acdSaServiceMonoCounterUaTimeThe UaTime is a measure of the time a service has been unavailable during this sampling interval.ro Unsigned32 .1.3.6.1.4.1.22420.2.12.1.2.3.1.3 |
acdSaServiceMonoCounterMaintTimeThe MaintTime is a measure of the time a service has been in maintenance during this sampling interval.ro Unsigned32 .1.3.6.1.4.1.22420.2.12.1.2.3.1.4 |
acdSaServiceMonoCounterAvailRatioIndicates the availability ratio in millionth of a percent (1,000,000 is 1%).ro Unsigned32 .1.3.6.1.4.1.22420.2.12.1.2.3.1.5 |
acdSaServiceMonoCounterGapsThe gap shall be the number of time the state change from available to unavailable.ro Unsigned32 .1.3.6.1.4.1.22420.2.12.1.2.3.1.6 |
acdSaServiceMonoCounterLargestGapThe largest gap shall be the largest number of consecutive unavailable second.ro Unsigned32 .1.3.6.1.4.1.22420.2.12.1.2.3.1.7 |
acdSaServiceMonoCounterChliTimeA counter which increments for every high loss interval. It is only reset to zero when one of the following conditions occur: 1) device reboot 2) explicit counter reset.ro Unsigned32 .1.3.6.1.4.1.22420.2.12.1.2.3.1.8 |
acdSaServiceMonoCounterChliRatioThe ratio of high loss intervals divided by the uptime minus the sum of maintenance time and unavailable time, expressed in millionth of a percent (1,000,000 is 1%).ro Unsigned32 .1.3.6.1.4.1.22420.2.12.1.2.3.1.9 |
acdSaMetricCounterTableThis table contains all instance of service availability of this unit. SEQUENCE OF AcdSaMetricCounterEntry .1.3.6.1.4.1.22420.2.12.1.2.4 |
acdSaMetricCounterEntryAn entry consisting of all counters for a Metric. AcdSaMetricCounterEntry .1.3.6.1.4.1.22420.2.12.1.2.4.1 |
acdSaMetricCounterValidFlagIndicates the validity of the metric counter during this sampling interval.ro AcdSaValidFlag .1.3.6.1.4.1.22420.2.12.1.2.4.1.1 |
acdSaMetricCounterUaTimeThe UaTime is a measure of the time a metric has been unavailable during this sampling interval.ro Unsigned32 .1.3.6.1.4.1.22420.2.12.1.2.4.1.2 |
acdSaMetricCounterChliTimeA counter which increments for every High Loss Interval. It is only reset to zero when one of the following conditions occur: 1) device reboot 2) explicit counter reset.ro Unsigned32 .1.3.6.1.4.1.22420.2.12.1.2.4.1.3 |
acdSaMetricHistCounterTableThis table contains all instance of service availability of this unit. SEQUENCE OF AcdSaMetricHistCounterEntry .1.3.6.1.4.1.22420.2.12.1.2.5 |
acdSaMetricHistCounterEntryAn entry consisting of all counters for a Metric. AcdSaMetricHistCounterEntry .1.3.6.1.4.1.22420.2.12.1.2.5.1 |
acdSaMetricHistCounterIDUnique value for each Metric instance. This value follows the ordering of the service table. Unsigned32 .1.3.6.1.4.1.22420.2.12.1.2.5.1.1 |
acdSaMetricHistCounterPeriodIndexAn index that uniquely identifies the particular sample this entry represents among all samples associated with the same service instance. This index starts at 1 and increases by one as each new period. Unsigned32 .1.3.6.1.4.1.22420.2.12.1.2.5.1.2 |
acdSaMetricHistCounterIntervalEndThis is the time of the end of this entry.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.22420.2.12.1.2.5.1.3 |
acdSaMetricHistCounterValidFlagIndicates the validity of the metric counter during this sampling interval.ro AcdSaValidFlag .1.3.6.1.4.1.22420.2.12.1.2.5.1.4 |
acdSaMetricHistCounterUaTimeThe UaTime is a measure of the time a metric has been unavailable during this sampling interval.ro Unsigned32 .1.3.6.1.4.1.22420.2.12.1.2.5.1.5 |
acdSaMetricHistCounterChliTimeA counter which increments for every High Loss Interval. It is only reset to zero when one of the following conditions occur: 1) device reboot 2) explicit counter reset.ro Unsigned32 .1.3.6.1.4.1.22420.2.12.1.2.5.1.6 |
acdSaMetricMonoCounterTableThis table contains all instance of service availability of this unit. SEQUENCE OF AcdSaMetricMonoCounterEntry .1.3.6.1.4.1.22420.2.12.1.2.6 |
acdSaMetricMonoCounterEntryAn entry consisting of all counters for a Metric. AcdSaMetricMonoCounterEntry .1.3.6.1.4.1.22420.2.12.1.2.6.1 |
acdSaMetricMonoCounterValidFlagIndicates the validity of the metric counter during this sampling interval.ro AcdSaValidFlag .1.3.6.1.4.1.22420.2.12.1.2.6.1.1 |
acdSaMetricMonoCounterUaTimeThe UaTime is a measure of the time a metric has been unavailable during this sampling interval.ro Unsigned32 .1.3.6.1.4.1.22420.2.12.1.2.6.1.2 |
acdSaMetricMonoCounterChliTimeA counter which increments for every high loss interval. It is only reset to zero when one of the following conditions occur: 1) device reboot 2) explicit counter reset.ro Unsigned32 .1.3.6.1.4.1.22420.2.12.1.2.6.1.3 |
acdSaStatus OBJECT IDENTIFIER .1.3.6.1.4.1.22420.2.12.1.3 |
acdSaServiceStatusTableThis table contains all instance of service availability of this unit. SEQUENCE OF AcdSaServiceStatusEntry .1.3.6.1.4.1.22420.2.12.1.3.1 |
acdSaServiceStatusEntryAn entry consisting of all status for a Service. AcdSaServiceStatusEntry .1.3.6.1.4.1.22420.2.12.1.3.1.1 |
acdSaServiceStatusIDUnique value for each service instance. Unsigned32 .1.3.6.1.4.1.22420.2.12.1.3.1.1.1 |
acdSaServiceStatusNameA unique name used to identify the Service.ro DisplayString .1.3.6.1.4.1.22420.2.12.1.3.1.1.2 |
acdSaServiceStatusAdminStateAdministrative state is one of is(1) or oos(2).ro AcdSaAdminStateFlag .1.3.6.1.4.1.22420.2.12.1.3.1.1.3 |
acdSaServiceStatusOperStateOperational state is one of is(1), oos(2) or oosAu (3).ro AcdSaOperStateFlag .1.3.6.1.4.1.22420.2.12.1.3.1.1.4 |
acdSaServiceStatusNbrMetricsThe number of metrics associated with this Service instance.ro Gauge32 .1.3.6.1.4.1.22420.2.12.1.3.1.1.5 |
acdSaConformance OBJECT IDENTIFIER .1.3.6.1.4.1.22420.2.12.2 |
acdSaCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.22420.2.12.2.1 |
acdSaComplianceThe compliance statement for support of the ACD-SA-MIB module. Unknown .1.3.6.1.4.1.22420.2.12.2.1.1 |
acdSaGroups OBJECT IDENTIFIER .1.3.6.1.4.1.22420.2.12.2.2 |
acdSaServiceConfigGroupObjects for the Service configuration Group. Unknown .1.3.6.1.4.1.22420.2.12.2.2.1 |
acdSaMetricConfigGroupObjects for the Metric configuration Group. Unknown .1.3.6.1.4.1.22420.2.12.2.2.2 |
acdSaServiceCounterGroupObjects for the Service Counter Group. Unknown .1.3.6.1.4.1.22420.2.12.2.2.3 |
acdSaServiceHistCounterGroupObjects for the Service History Counter Group. Unknown .1.3.6.1.4.1.22420.2.12.2.2.4 |
acdSaServiceMonoCounterGroupObjects for the Service Monotonic Counter Group. Unknown .1.3.6.1.4.1.22420.2.12.2.2.5 |
acdSaMetricCounterGroupObjects for the Metric Counter Group. Unknown .1.3.6.1.4.1.22420.2.12.2.2.6 |
acdSaMetricHistCounterGroupObjects for the Metric History Counter Group. Unknown .1.3.6.1.4.1.22420.2.12.2.2.7 |
acdSaMetricMonoCounterGroupObjects for the Metric History Counter Group. Unknown .1.3.6.1.4.1.22420.2.12.2.2.8 |
acdSaServiceStatusGroupObjects for the Service Status Group. Unknown .1.3.6.1.4.1.22420.2.12.2.2.9 |
More MIBs from Accedian
Browse all AccedianMIBs →ACD-CFM-MIB
The ACD-CFM-MIB module enables the monitoring and configuration of IEEE 802.1ag Connectivity Fault Management (CFM) sessions to measure network latency and track packet loss statistics. It provides specific MIB objects for retrieving delay measurement results and configuring packet loss thresholds within Ethernet service provider networks.
329 objects→
ACD-PAA-MIB
The ACD-PAA-MIB module enables Accedian Networks devices to expose and manage the Performance Analysis Agent (PAA) database, facilitating the retrieval of granular network performance metrics such as latency, jitter, packet loss, and path quality statistics for active flow monitoring.
301 objects→
ACD-TWAMP-GEN-MIB
The ACD-TWAMP-GEN-MIB provides management access to the TWAMP Generator database on Accedian Networks devices, enabling the monitoring of active measurement sessions, configuration parameters, and performance metrics for Two-Way Active Measurement Protocol (TWAMP) traffic generation.
177 objects→
ACD-FILTER-MIB
The ACD-FILTER-MIB manages the configuration and state of packet filtering rules within Accedian Networks performance monitoring appliances, enabling administrators to define traffic selection criteria for precise network path analysis. This module specifically exposes the filter database structure, allowing for the enforcement of specific packet capture filters to isolate relevant traffic flows for latency and jitter measurement.
175 objects→
ACD-PORT-MIB
The ACD-PORT-MIB module enables monitoring of interface-level traffic counters and performance metrics on Accedian Networks devices, specifically facilitating the collection of port statistics for network latency and throughput analysis.
112 objects→
ACD-ERP-MIB
The ACD-ERP-MIB module provides access to the Accedian Networks device's Enterprise Resource Planning database, exposing performance metrics and operational data required for end-to-end network path analysis and service level monitoring. This MIB enables the retrieval of specific ERP state variables and counters to validate network performance against defined service level agreements.
111 objects→