ACD-CFM-MIB
AI MIB Summary
The ACD-CFM-MIB module enables the monitoring and configuration of IEEE 802.1ag Connectivity Fault Management (CFM) sessions to measure network latency and track packet loss statistics. It provides specific MIB objects for retrieving delay measurement results and configuring packet loss thresholds within Ethernet service provider networks.
This MIB is complementary to the IEEE P802.1ag(TM) CFM MIB. It covers the delay measurment and the packet loss configuration and results.
Main OID:
acdCfm.1.3.6.1.4.1.22420.2.7
329
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
329 total| Object Name |
|---|
acdCfmThis MIB is complementary to the IEEE P802.1ag(TM) CFM MIB. It covers the delay measurment and the packet loss configuration and results. MODULE-IDENTITY .1.3.6.1.4.1.22420.2.7 |
acdCfmNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.22420.2.7.0 |
acdCfmMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.22420.2.7.1 |
acdCfmDelayMeasurement OBJECT IDENTIFIER .1.3.6.1.4.1.22420.2.7.1.1 |
acdCfmDmCfgTableConfiguration table of all DM entries. SEQUENCE OF AcdCfmDmCfgEntry .1.3.6.1.4.1.22420.2.7.1.1.1 |
acdCfmDmCfgEntryAn entry consisting of all settings to manage a DM instance. AcdCfmDmCfgEntry .1.3.6.1.4.1.22420.2.7.1.1.1.1 |
acdCfmDmCfgIDUnique value for each Delay Measurement instance. This value follows the ordering of the results table. Unsigned32 .1.3.6.1.4.1.22420.2.7.1.1.1.1.1 |
acdCfmDmCfgRowStatusAll columns must have a valid value before a row can be activated.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.22420.2.7.1.1.1.1.2 |
acdCfmDmCfgMepIdxMaintenance association End Point Identifier.rw Unsigned32 .1.3.6.1.4.1.22420.2.7.1.1.1.1.3 |
acdCfmDmCfgRemoteMepIdRemote Maintenance association End Point Identifier used for this delay measurement configuration.rw Unsigned32 .1.3.6.1.4.1.22420.2.7.1.1.1.1.4 |
acdCfmDmCfgPriorityThe VLAN priority. Its value ranges from 0 to 7.rw Unsigned32 .1.3.6.1.4.1.22420.2.7.1.1.1.1.5 |
acdCfmDmCfgEnableEnable CFM to issues DMM measurement packets.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.22420.2.7.1.1.1.1.6 |
acdCfmDmCfgIntervalInterval in milliseconds at which CFM issues DMM measurement packets.rw Unsigned32 .1.3.6.1.4.1.22420.2.7.1.1.1.1.7 |
acdCfmDmCfgRefPeriodReference period in minutes for Delay Measurement.rw Unsigned32 .1.3.6.1.4.1.22420.2.7.1.1.1.1.8 |
acdCfmDmCfgOneWayDelayEnableEnable CFM to compute one-way delay measurements.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.22420.2.7.1.1.1.1.9 |
acdCfmDmCfgOneWayDelayMaxMaximum allowed instantaneous delay in milliseconds.rw Unsigned32 UNITS "milliseconds" .1.3.6.1.4.1.22420.2.7.1.1.1.1.10 |
acdCfmDmCfgOneWayDelayThreshNumber of consecutive delay greater than the maximum allowed value before alert.rw Unsigned32 .1.3.6.1.4.1.22420.2.7.1.1.1.1.11 |
acdCfmDmCfgOneWayAvgDelayThreshOne-way average delay threshold in milliseconds.rw Unsigned32 .1.3.6.1.4.1.22420.2.7.1.1.1.1.12 |
acdCfmDmCfgOneWayDvEnableEnable CFM to compute one-way delay variation measurements.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.22420.2.7.1.1.1.1.13 |
acdCfmDmCfgOneWayDvMaxMaximum allowed instantaneous delay variation in milliseconds.rw Unsigned32 .1.3.6.1.4.1.22420.2.7.1.1.1.1.14 |
acdCfmDmCfgOneWayDvThreshNumber of consecutive delay variation greater than the maximum allowed value before alert.rw Unsigned32 .1.3.6.1.4.1.22420.2.7.1.1.1.1.15 |
acdCfmDmCfgOneWayAvgDvThreshOne-way average delay variation threshold in milliseconds.rw Unsigned32 .1.3.6.1.4.1.22420.2.7.1.1.1.1.16 |
acdCfmDmCfgTwoWayDelayEnableEnable CFM to compute Two-way delay measurements.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.22420.2.7.1.1.1.1.17 |
acdCfmDmCfgTwoWayDelayMaxMaximum allowed instantaneous delay in milliseconds.rw Unsigned32 .1.3.6.1.4.1.22420.2.7.1.1.1.1.18 |
acdCfmDmCfgTwoWayDelayThreshNumber of consecutive delay greater than the maximum allowed value before alert.rw Unsigned32 .1.3.6.1.4.1.22420.2.7.1.1.1.1.19 |
acdCfmDmCfgTwoWayAvgDelayThreshTwo-way average delay threshold in milliseconds.rw Unsigned32 .1.3.6.1.4.1.22420.2.7.1.1.1.1.20 |
acdCfmDmCfgTwoWayDvEnableEnable CFM to compute Two-way delay variation measurements.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.22420.2.7.1.1.1.1.21 |
acdCfmDmCfgTwoWayDvMaxMaximum allowed instantaneous delay variation in milliseconds.rw Unsigned32 .1.3.6.1.4.1.22420.2.7.1.1.1.1.22 |
acdCfmDmCfgTwoWayDvThreshNumber of consecutive delay variation greater than the maximum allowed value before alert.rw Unsigned32 .1.3.6.1.4.1.22420.2.7.1.1.1.1.23 |
acdCfmDmCfgTwoWayAvgDvThreshTwo-way average delay variation threshold in milliseconds.rw Unsigned32 .1.3.6.1.4.1.22420.2.7.1.1.1.1.24 |
acdCfmResultOneWayDelayTableOne way delay result table of all DM entries. SEQUENCE OF AcdCfmResultOneWayDelayEntry .1.3.6.1.4.1.22420.2.7.1.1.2 |
acdCfmResultOneWayDelayEntryAn entry consisting of One Way Delay results for a DM entry. AcdCfmResultOneWayDelayEntry .1.3.6.1.4.1.22420.2.7.1.1.2.1 |
acdCfmResultOneWayDelayIDUnique value for each Delay Measurement instance. This value follows the ordering of the Dm table. Unsigned32 .1.3.6.1.4.1.22420.2.7.1.1.2.1.1 |
acdCfmResultOneWayDelayPeriodIndexAn index that uniquely identifies the particular sample this entry represents among all samples associated with the same DM instance. This index starts at 1 and increases by one as each new period.ro Unsigned32 .1.3.6.1.4.1.22420.2.7.1.1.2.1.2 |
acdCfmResultOneWayDelayIntervalStartThis is the time of the start of the period.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.22420.2.7.1.1.2.1.3 |
acdCfmResultOneWayDelayValidIndicates the validity of the One-way delay results during this sampling interval.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.22420.2.7.1.1.2.1.4 |
acdCfmResultOneWayDelayAlertIndicate the presence of the One Way Delay alert.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.22420.2.7.1.1.2.1.5 |
acdCfmResultOneWayDelayAvgAlertIndicate the presence of the One Way Average Delay alert.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.22420.2.7.1.1.2.1.6 |
acdCfmResultOneWayDelaySamplesIndicates the number of samples gathered during the sampling interval to calculate One-way delay results.ro Unsigned32 .1.3.6.1.4.1.22420.2.7.1.1.2.1.7 |
acdCfmResultOneWayDelayMinValueIndicates the One-way delay minimum value. The value is expressed in micro-seconds.ro Integer32 UNITS "microseconds" .1.3.6.1.4.1.22420.2.7.1.1.2.1.8 |
acdCfmResultOneWayDelayMaxValueIndicates the One-way delay maximum value. The value is expressed in micro-seconds.ro Integer32 UNITS "microseconds" .1.3.6.1.4.1.22420.2.7.1.1.2.1.9 |
acdCfmResultOneWayDelayAvgValueIndicates the One-way delay average value. The value is expressed in micro-seconds.ro Integer32 UNITS "microseconds" .1.3.6.1.4.1.22420.2.7.1.1.2.1.10 |
acdCfmResultOneWayDelayThreshExcIndicates the number of samples exceeding the limit.ro Unsigned32 .1.3.6.1.4.1.22420.2.7.1.1.2.1.11 |
acdCfmResultOneWayDelayInstValueIndicates the One-way delay Instantaneous value. The value is expressed in micro-seconds.ro Integer32 UNITS "microseconds" .1.3.6.1.4.1.22420.2.7.1.1.2.1.12 |
acdCfmResultOneWayDvTableOne way delay variation result table of all DM entries. SEQUENCE OF AcdCfmResultOneWayDvEntry .1.3.6.1.4.1.22420.2.7.1.1.3 |
acdCfmResultOneWayDvEntryAn entry consisting of One Way Delay variation results for a DM entry. AcdCfmResultOneWayDvEntry .1.3.6.1.4.1.22420.2.7.1.1.3.1 |
acdCfmResultOneWayDvIDUnique value for each Delay variation Measurement instance. This value follows the ordering of the DM table. Unsigned32 .1.3.6.1.4.1.22420.2.7.1.1.3.1.1 |
acdCfmResultOneWayDvPeriodIndexAn index that uniquely identifies the particular sample this entry represents among all samples associated with the same DM instance. This index starts at 1 and increases by one as each new period.ro Unsigned32 .1.3.6.1.4.1.22420.2.7.1.1.3.1.2 |
acdCfmResultOneWayDvIntervalStartThis is the time of the start of the period.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.22420.2.7.1.1.3.1.3 |
acdCfmResultOneWayDvValidIndicates the validity of the One-way delay variation results during this sampling interval.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.22420.2.7.1.1.3.1.4 |
acdCfmResultOneWayDvAlertIndicate the presence of the One Way Delay variation alert.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.22420.2.7.1.1.3.1.5 |
acdCfmResultOneWayDvAvgAlertIndicate the presence of the One Way Average Delay variation alert.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.22420.2.7.1.1.3.1.6 |
acdCfmResultOneWayDvSamplesIndicates the number of samples gathered during the sampling interval to calculate One-way delay variation results.ro Unsigned32 .1.3.6.1.4.1.22420.2.7.1.1.3.1.7 |
acdCfmResultOneWayDvMinValueIndicates the One-way delay variation minimum value. The value is expressed in micro-seconds.ro Integer32 UNITS "microseconds" .1.3.6.1.4.1.22420.2.7.1.1.3.1.8 |
acdCfmResultOneWayDvMaxValueIndicates the One-way delay variationmaximum value. The value is expressed in micro-seconds.ro Integer32 UNITS "microseconds" .1.3.6.1.4.1.22420.2.7.1.1.3.1.9 |
acdCfmResultOneWayDvAvgValueIndicates the One-way delay variation average value. The value is expressed in micro-seconds.ro Integer32 UNITS "microseconds" .1.3.6.1.4.1.22420.2.7.1.1.3.1.10 |
acdCfmResultOneWayDvThreshExcIndicates the number of samples exceeding the limit.ro Unsigned32 .1.3.6.1.4.1.22420.2.7.1.1.3.1.11 |
acdCfmResultOneWayDvInstValueIndicates the One-way delay variation Instantaneous value. The value is expressed in micro-seconds.ro Integer32 UNITS "microseconds" .1.3.6.1.4.1.22420.2.7.1.1.3.1.12 |
acdCfmResultTwoWayDelayTableTwo way delay result table of all DM entries. SEQUENCE OF AcdCfmResultTwoWayDelayEntry .1.3.6.1.4.1.22420.2.7.1.1.4 |
acdCfmResultTwoWayDelayEntryAn entry consisting of Two Way Delay results for a DM entry. AcdCfmResultTwoWayDelayEntry .1.3.6.1.4.1.22420.2.7.1.1.4.1 |
acdCfmResultTwoWayDelayIDUnique value for each Delay Measurement instance. This value follows the ordering of the Dm table. Unsigned32 .1.3.6.1.4.1.22420.2.7.1.1.4.1.1 |
acdCfmResultTwoWayDelayPeriodIndexAn index that uniquely identifies the particular sample this entry represents among all samples associated with the same DM instance. This index starts at 1 and increases by one as each new period.ro Unsigned32 .1.3.6.1.4.1.22420.2.7.1.1.4.1.2 |
acdCfmResultTwoWayDelayIntervalStartThis is the time of the start of the period.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.22420.2.7.1.1.4.1.3 |
acdCfmResultTwoWayDelayValidIndicates the validity of the Two way delay results during this sampling interval.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.22420.2.7.1.1.4.1.4 |
acdCfmResultTwoWayDelayAlertIndicate the presence of the Two Way Delay alert.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.22420.2.7.1.1.4.1.5 |
acdCfmResultTwoWayDelayAvgAlertIndicate the presence of the Two Way Average Delay alert.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.22420.2.7.1.1.4.1.6 |
acdCfmResultTwoWayDelaySamplesIndicates the number of samples gathered during the sampling interval to calculate Two-way delay results.ro Unsigned32 .1.3.6.1.4.1.22420.2.7.1.1.4.1.7 |
acdCfmResultTwoWayDelayMinValueIndicates the Two-way delay minimum value. The value is expressed in micro-seconds.ro Integer32 UNITS "microseconds" .1.3.6.1.4.1.22420.2.7.1.1.4.1.8 |
acdCfmResultTwoWayDelayMaxValueIndicates the Two-way delay maximum value. The value is expressed in micro-seconds.ro Integer32 UNITS "microseconds" .1.3.6.1.4.1.22420.2.7.1.1.4.1.9 |
acdCfmResultTwoWayDelayAvgValueIndicates the Two-way delay average value. The value is expressed in micro-seconds.ro Integer32 UNITS "microseconds" .1.3.6.1.4.1.22420.2.7.1.1.4.1.10 |
acdCfmResultTwoWayDelayThreshExcIndicates the number of samples exceeding the limit.ro Unsigned32 .1.3.6.1.4.1.22420.2.7.1.1.4.1.11 |
acdCfmResultTwoWayDelayInstValueIndicates the Two-way delay Instantaneous value. The value is expressed in micro-seconds.ro Integer32 UNITS "microseconds" .1.3.6.1.4.1.22420.2.7.1.1.4.1.12 |
acdCfmResultTwoWayDvTableTwo way delay variation result table of all DM entries. SEQUENCE OF AcdCfmResultTwoWayDvEntry .1.3.6.1.4.1.22420.2.7.1.1.5 |
acdCfmResultTwoWayDvEntryAn entry consisting of One Way Delay variation results for a DM entry. AcdCfmResultTwoWayDvEntry .1.3.6.1.4.1.22420.2.7.1.1.5.1 |
acdCfmResultTwoWayDvIDUnique value for each Delay variation Measurement instance. This value follows the ordering of the Dm table. Unsigned32 .1.3.6.1.4.1.22420.2.7.1.1.5.1.1 |
acdCfmResultTwoWayDvPeriodIndexAn index that uniquely identifies the particular sample this entry represents among all samples associated with the same DM instance. This index starts at 1 and increases by one as each new period.ro Unsigned32 .1.3.6.1.4.1.22420.2.7.1.1.5.1.2 |
acdCfmResultTwoWayDvIntervalStartThis is the time of the start of the period.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.22420.2.7.1.1.5.1.3 |
acdCfmResultTwoWayDvValidIndicates the validity of the two-way delay variation results during this sampling interval.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.22420.2.7.1.1.5.1.4 |
acdCfmResultTwoWayDvAlertIndicate the presence of the Two Way Delay variation alert.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.22420.2.7.1.1.5.1.5 |
acdCfmResultTwoWayDvAvgAlertIndicate the presence of the Two Way Average Delay variation alert.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.22420.2.7.1.1.5.1.6 |
acdCfmResultTwoWayDvSamplesIndicates the number of samples gathered during the sampling interval to calculate Two-way delay variation results.ro Unsigned32 .1.3.6.1.4.1.22420.2.7.1.1.5.1.7 |
acdCfmResultTwoWayDvMinValueIndicates the two-way delay variation minimum value. The value is expressed in micro-seconds.ro Integer32 UNITS "microseconds" .1.3.6.1.4.1.22420.2.7.1.1.5.1.8 |
acdCfmResultTwoWayDvMaxValueIndicates the two-way delay variation maximum value. The value is expressed in micro-seconds.ro Integer32 UNITS "microseconds" .1.3.6.1.4.1.22420.2.7.1.1.5.1.9 |
acdCfmResultTwoWayDvAvgValueIndicates the two-way delay variation average value. The value is expressed in micro-seconds.ro Integer32 UNITS "microseconds" .1.3.6.1.4.1.22420.2.7.1.1.5.1.10 |
acdCfmResultTwoWayDvThreshExcIndicates the number of samples exceeding the limit.ro Unsigned32 .1.3.6.1.4.1.22420.2.7.1.1.5.1.11 |
acdCfmResultTwoWayDvInstValueIndicates the two-way delay variation Instantaneous value. The value is expressed in micro-seconds.ro Integer32 UNITS "microseconds" .1.3.6.1.4.1.22420.2.7.1.1.5.1.12 |
acdCfmHistResultOneWayDelayTableOne way delay result table of all DM entries. SEQUENCE OF AcdCfmHistResultOneWayDelayEntry .1.3.6.1.4.1.22420.2.7.1.1.6 |
acdCfmHistResultOneWayDelayEntryAn entry consisting of One Way Delay results for a DM entry. AcdCfmHistResultOneWayDelayEntry .1.3.6.1.4.1.22420.2.7.1.1.6.1 |
acdCfmHistResultOneWayDelayIDUnique value for each Delay Measurement instance. This value follows the ordering of the Dm table. Unsigned32 .1.3.6.1.4.1.22420.2.7.1.1.6.1.1 |
acdCfmHistResultOneWayDelaySampleIndexAn index that uniquely identifies the particular sample this entry represents among all samples associated with the same DM instance. This index starts at 1 and increases by one as each new period. Unsigned32 .1.3.6.1.4.1.22420.2.7.1.1.6.1.2 |
acdCfmHistResultOneWayDelayStatusIndicates the validity of the One-way delay results during this sampling interval.ro Enumeration .1.3.6.1.4.1.22420.2.7.1.1.6.1.3 |
acdCfmHistResultOneWayDelayDurationUnique value for each Delay Measurement instance. This value follows the ordering of the Dm table.ro Unsigned32 .1.3.6.1.4.1.22420.2.7.1.1.6.1.4 |
acdCfmHistResultOneWayDelayIntervalEndThis is the time of the end of the period.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.22420.2.7.1.1.6.1.5 |
acdCfmHistResultOneWayDelaySamplesIndicates the number of samples gathered during the sampling interval to calculate One-way delay results.ro Unsigned32 .1.3.6.1.4.1.22420.2.7.1.1.6.1.6 |
acdCfmHistResultOneWayDelayMinValueIndicates the One-way delay minimum value. The value is expressed in micro-seconds.ro Integer32 UNITS "microseconds" .1.3.6.1.4.1.22420.2.7.1.1.6.1.7 |
acdCfmHistResultOneWayDelayMaxValueIndicates the One-way delay maximum value. The value is expressed in micro-seconds.ro Integer32 UNITS "microseconds" .1.3.6.1.4.1.22420.2.7.1.1.6.1.8 |
acdCfmHistResultOneWayDelayAvgValueIndicates the One-way delay average value. The value is expressed in micro-seconds.ro Integer32 UNITS "microseconds" .1.3.6.1.4.1.22420.2.7.1.1.6.1.9 |
acdCfmHistResultOneWayDelayThreshExcIndicates the number of samples exceeding the limit.ro Unsigned32 .1.3.6.1.4.1.22420.2.7.1.1.6.1.10 |
acdCfmHistResultOneWayDvTableOne way delay variation result table of all DM entries. SEQUENCE OF AcdCfmHistResultOneWayDvEntry .1.3.6.1.4.1.22420.2.7.1.1.7 |
acdCfmHistResultOneWayDvEntryAn entry consisting of One Way Delay variation results for a DM entry. AcdCfmHistResultOneWayDvEntry .1.3.6.1.4.1.22420.2.7.1.1.7.1 |
acdCfmHistResultOneWayDvIDUnique value for each Delay variation Measurement instance. This value follows the ordering of the DM table. Unsigned32 .1.3.6.1.4.1.22420.2.7.1.1.7.1.1 |
acdCfmHistResultOneWayDvSampleIndexAn index that uniquely identifies the particular sample this entry represents among all samples associated with the same DM instance. This index starts at 1 and increases by one as each new period. Unsigned32 .1.3.6.1.4.1.22420.2.7.1.1.7.1.2 |
acdCfmHistResultOneWayDvStatusIndicates the validity of the One-way delay variation results during this sampling interval.ro Enumeration .1.3.6.1.4.1.22420.2.7.1.1.7.1.3 |
acdCfmHistResultOneWayDvDurationThe interval in seconds over which the data is sampled for this entry.ro Unsigned32 .1.3.6.1.4.1.22420.2.7.1.1.7.1.4 |
acdCfmHistResultOneWayDvIntervalEndThis is the time of the end of the period.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.22420.2.7.1.1.7.1.5 |
acdCfmHistResultOneWayDvSamplesIndicates the number of samples gathered during the sampling interval to calculate One-way delay variation results.ro Unsigned32 .1.3.6.1.4.1.22420.2.7.1.1.7.1.6 |
acdCfmHistResultOneWayDvMinValueIndicates the One-way delay variation minimum value. The value is expressed in micro-seconds.ro Integer32 UNITS "microseconds" .1.3.6.1.4.1.22420.2.7.1.1.7.1.7 |
acdCfmHistResultOneWayDvMaxValueIndicates the One-way delay variationmaximum value. The value is expressed in micro-seconds.ro Integer32 UNITS "microseconds" .1.3.6.1.4.1.22420.2.7.1.1.7.1.8 |
acdCfmHistResultOneWayDvAvgValueIndicates the One-way delay variation average value. The value is expressed in micro-seconds.ro Integer32 UNITS "microseconds" .1.3.6.1.4.1.22420.2.7.1.1.7.1.9 |
acdCfmHistResultOneWayDvThreshExcIndicates the number of samples exceeding the limit.ro Unsigned32 .1.3.6.1.4.1.22420.2.7.1.1.7.1.10 |
acdCfmHistResultTwoWayDelayTableTwo way delay result table of all DM entries. SEQUENCE OF AcdCfmHistResultTwoWayDelayEntry .1.3.6.1.4.1.22420.2.7.1.1.8 |
acdCfmHistResultTwoWayDelayEntryAn entry consisting of Two Way Delay results for a DM entry. AcdCfmHistResultTwoWayDelayEntry .1.3.6.1.4.1.22420.2.7.1.1.8.1 |
acdCfmHistResultTwoWayDelayIDUnique value for each Delay Measurement instance. This value follows the ordering of the Dm table. Unsigned32 .1.3.6.1.4.1.22420.2.7.1.1.8.1.1 |
acdCfmHistResultTwoWayDelaySampleIndexAn index that uniquely identifies the particular sample this entry represents among all samples associated with the same DM instance. This index starts at 1 and increases by one as each new period. Unsigned32 .1.3.6.1.4.1.22420.2.7.1.1.8.1.2 |
acdCfmHistResultTwoWayDelayStatusIndicates the validity of the Two way delay results during this sampling interval.ro Enumeration .1.3.6.1.4.1.22420.2.7.1.1.8.1.3 |
acdCfmHistResultTwoWayDelayDurationThe interval in seconds over which the data is sampled for this entry.ro Unsigned32 .1.3.6.1.4.1.22420.2.7.1.1.8.1.4 |
acdCfmHistResultTwoWayDelayIntervalEndThis is the time of the end of the period.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.22420.2.7.1.1.8.1.5 |
acdCfmHistResultTwoWayDelaySamplesIndicates the number of samples gathered during the sampling interval to calculate Two-way delay results.ro Unsigned32 .1.3.6.1.4.1.22420.2.7.1.1.8.1.6 |
acdCfmHistResultTwoWayDelayMinValueIndicates the Two-way delay minimum value. The value is expressed in micro-seconds.ro Integer32 UNITS "microseconds" .1.3.6.1.4.1.22420.2.7.1.1.8.1.7 |
acdCfmHistResultTwoWayDelayMaxValueIndicates the Two-way delay maximum value. The value is expressed in micro-seconds.ro Integer32 UNITS "microseconds" .1.3.6.1.4.1.22420.2.7.1.1.8.1.8 |
acdCfmHistResultTwoWayDelayAvgValueIndicates the Two-way delay average value. The value is expressed in micro-seconds.ro Integer32 UNITS "microseconds" .1.3.6.1.4.1.22420.2.7.1.1.8.1.9 |
acdCfmHistResultTwoWayDelayThreshExcIndicates the number of samples exceeding the limit.ro Unsigned32 .1.3.6.1.4.1.22420.2.7.1.1.8.1.10 |
acdCfmHistResultTwoWayDvTableTwo way delay variation result table of all DM entries. SEQUENCE OF AcdCfmHistResultTwoWayDvEntry .1.3.6.1.4.1.22420.2.7.1.1.9 |
acdCfmHistResultTwoWayDvEntryAn entry consisting of two Way Delay variation results for a DM entry. AcdCfmHistResultTwoWayDvEntry .1.3.6.1.4.1.22420.2.7.1.1.9.1 |
acdCfmHistResultTwoWayDvIDUnique value for each Delay variation Measurement instance. This value follows the ordering of the Dm table. Unsigned32 .1.3.6.1.4.1.22420.2.7.1.1.9.1.1 |
acdCfmHistResultTwoWayDvSampleIndexAn index that uniquely identifies the particular sample this entry represents among all samples associated with the same DM instance. This index starts at 1 and increases by one as each new period. Unsigned32 .1.3.6.1.4.1.22420.2.7.1.1.9.1.2 |
acdCfmHistResultTwoWayDvStatusIndicates the validity of the two-way delay variation results during this sampling interval.ro Enumeration .1.3.6.1.4.1.22420.2.7.1.1.9.1.3 |
acdCfmHistResultTwoWayDvDurationThe interval in seconds over which the data is sampled for this entry.ro Unsigned32 .1.3.6.1.4.1.22420.2.7.1.1.9.1.4 |
acdCfmHistResultTwoWayDvIntervalEndThis is the time of the end of the period.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.22420.2.7.1.1.9.1.5 |
acdCfmHistResultTwoWayDvSamplesIndicates the number of samples gathered during the sampling interval to calculate Two-way delay variation results.ro Unsigned32 .1.3.6.1.4.1.22420.2.7.1.1.9.1.6 |
acdCfmHistResultTwoWayDvMinValueIndicates the two-way delay variation minimum value. The value is expressed in micro-seconds.ro Integer32 UNITS "microseconds" .1.3.6.1.4.1.22420.2.7.1.1.9.1.7 |
acdCfmHistResultTwoWayDvMaxValueIndicates the two-way delay variation maximum value. The value is expressed in micro-seconds.ro Integer32 UNITS "microseconds" .1.3.6.1.4.1.22420.2.7.1.1.9.1.8 |
acdCfmHistResultTwoWayDvAvgValueIndicates the two-way delay variation average value. The value is expressed in micro-seconds.ro Integer32 UNITS "microseconds" .1.3.6.1.4.1.22420.2.7.1.1.9.1.9 |
acdCfmHistResultTwoWayDvThreshExcIndicates the number of samples exceeding the limit.ro Unsigned32 .1.3.6.1.4.1.22420.2.7.1.1.9.1.10 |
acdCfmPacketLoss OBJECT IDENTIFIER .1.3.6.1.4.1.22420.2.7.1.2 |
acdCfmPktLossCfgTableConfiguration table of all Packet Loss entries. SEQUENCE OF AcdCfmPktLossCfgEntry .1.3.6.1.4.1.22420.2.7.1.2.1 |
acdCfmPktLossCfgEntryAn entry consisting of all settings to manage a Packet loss instance. AcdCfmPktLossCfgEntry .1.3.6.1.4.1.22420.2.7.1.2.1.1 |
acdCfmPktLossCfgIDUnique value for each Packet Loss instance. This value follows the ordering the results table. Unsigned32 .1.3.6.1.4.1.22420.2.7.1.2.1.1.1 |
acdCfmPktLossCfgRowStatusThe writable columns in a row can not be changed if the row is active. All columns must have a valid value before a row can be activated.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.22420.2.7.1.2.1.1.2 |
acdCfmPktLossCfgMepIdxMaintenance association End Point Identifier.rw Unsigned32 .1.3.6.1.4.1.22420.2.7.1.2.1.1.3 |
acdCfmPktLossCfgRemoteMepIdRemote Maintenance association End Point Identifier.rw Unsigned32 .1.3.6.1.4.1.22420.2.7.1.2.1.1.4 |
acdCfmPktLossCfgPriorityThe VLAN priority. Its value ranges from 0 to 7. Same has CCM priority for packet loss based on CCM.rw Unsigned32 .1.3.6.1.4.1.22420.2.7.1.2.1.1.5 |
acdCfmPktLossCfgEnableEnable CFM to perform Packet Loss measurement.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.22420.2.7.1.2.1.1.6 |
acdCfmPktLossCfgIntervalInterval in milliseconds at which CFM issues Packet Loss measurement packets. Same has CCM interval for packet loss based on CCM.rw Unsigned32 .1.3.6.1.4.1.22420.2.7.1.2.1.1.7 |
acdCfmPktLossCfgRefPeriodReference period in minutes for Packet Loss Measurement.rw Unsigned32 .1.3.6.1.4.1.22420.2.7.1.2.1.1.8 |
acdCfmPktLossCfgThreshMaximum number of packet loss allowed without issuing an alarm.rw Unsigned32 .1.3.6.1.4.1.22420.2.7.1.2.1.1.9 |
acdCfmPktLossCfgRatioThreshPacket loss ratio threshold allowed without issuing an alarm expressed in millionth of percent (1,000,000 is 1%).rw Unsigned32 .1.3.6.1.4.1.22420.2.7.1.2.1.1.10 |
acdCfmResultPktLossTablePacket loss result table of a MEP and remote MEP pair. SEQUENCE OF AcdCfmResultPktLossEntry .1.3.6.1.4.1.22420.2.7.1.2.2 |
acdCfmResultPktLossEntryAn entry consisting of packet loss result for a specific MEP and remote MEP pair. AcdCfmResultPktLossEntry .1.3.6.1.4.1.22420.2.7.1.2.2.1 |
acdCfmResultPktLossIDUnique value for each Delay variation Measurement instance. This value follows the ordering of the Dm table. Unsigned32 .1.3.6.1.4.1.22420.2.7.1.2.2.1.1 |
acdCfmResultPktLossPeriodIndexAn index that uniquely identifies the particular sample this entry represents among all samples associated with the same PL instance. This index starts at 1 and increases by one as each new period.ro Unsigned32 .1.3.6.1.4.1.22420.2.7.1.2.2.1.2 |
acdCfmResultPktLossIntervalStartThis is the time of the start of the period.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.22420.2.7.1.2.2.1.3 |
acdCfmResultPktLossValidIndicates the validity of the packet loss results during this sampling interval.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.22420.2.7.1.2.2.1.4 |
acdCfmResultPktLossAlertIndicate the presence of the Packet Loss alert.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.22420.2.7.1.2.2.1.5 |
acdCfmResultPktLossSamplesIndicates the number of samples gathered during the sampling interval to calculate packet loss results.ro Counter32 .1.3.6.1.4.1.22420.2.7.1.2.2.1.6 |
acdCfmResultPktLossOverflowSamplesThe number of times the associated acdCfmResultPktLossSamples counter has overflowed during this sampling interval. This is a 32 bits counter. Combined with acdCfmResultPktLossSamples, it provides the equivalent of the 64 bits counter acdCfmResultPktLossHCSamples.ro Counter32 .1.3.6.1.4.1.22420.2.7.1.2.2.1.7 |
acdCfmResultPktLossHCSamplesIndicates the number of samples gathered during the sampling interval to calculate packet loss results.ro Counter64 .1.3.6.1.4.1.22420.2.7.1.2.2.1.8 |
acdCfmResultPktLossNbrLossThis is the number of packet loss.ro Counter32 .1.3.6.1.4.1.22420.2.7.1.2.2.1.9 |
acdCfmResultPktLossOverflowNbrLossThe number of times the associated acdCfmResultPktLossNbrLoss counter has overflowed during this sampling interval. This is a 32 bits counter. Combined with acdCfmResultPktLossNbrLoss, it provides the equivalent of the 64 bits counter acdCfmResultPktLossHCNbrLoss.ro Counter32 .1.3.6.1.4.1.22420.2.7.1.2.2.1.10 |
acdCfmResultPktLossHCNbrLossThis is the number of packet loss.ro Counter64 .1.3.6.1.4.1.22420.2.7.1.2.2.1.11 |
acdCfmResultPktLossNbrGapsThis is the number of gap.ro Counter32 .1.3.6.1.4.1.22420.2.7.1.2.2.1.12 |
acdCfmResultPktLossOverflowNbrGapsThe number of times the associated acdCfmResultPktLossNbrGaps counter has overflowed during this sampling interval. This is a 32 bits counter. Combined with acdCfmResultPktLossNbrGaps, it provides the equivalent of the 64 bits counter acdCfmResultPktLossHCNbrGaps.ro Counter32 .1.3.6.1.4.1.22420.2.7.1.2.2.1.13 |
acdCfmResultPktLossHCNbrGapsThis is the number of gap.ro Counter64 .1.3.6.1.4.1.22420.2.7.1.2.2.1.14 |
acdCfmResultPktLossLargestGapthe largest gap size in packets.ro Counter32 .1.3.6.1.4.1.22420.2.7.1.2.2.1.15 |
acdCfmResultPktLossOverflowLargestGapThe number of times the associated acdCfmResultPktLossLargestGap counter has overflowed during this sampling interval. This is a 32 bits counter. Combined with acdCfmResultPktLossLargestGap, it provides the equivalent of the 64 bits counter acdCfmResultPktLossHCLargestGap.ro Counter32 .1.3.6.1.4.1.22420.2.7.1.2.2.1.16 |
acdCfmResultPktLossHCLargestGapthe largest gap size in packets.ro Counter64 .1.3.6.1.4.1.22420.2.7.1.2.2.1.17 |
acdCfmResultPktLossRatioIndicates the packet loss ratio. The packet loss ratio is the percent of packets transmitted but not received in millionth of a percent (1,000,000 is 1%).ro Unsigned32 .1.3.6.1.4.1.22420.2.7.1.2.2.1.18 |
acdCfmHistResultPktLossTablePacket loss history result table of a MEP and remote MEP pair. SEQUENCE OF AcdCfmHistResultPktLossEntry .1.3.6.1.4.1.22420.2.7.1.2.3 |
acdCfmHistResultPktLossEntryAn entry consisting of Packet loss history result for a specific MEP and remote MEP pair. AcdCfmHistResultPktLossEntry .1.3.6.1.4.1.22420.2.7.1.2.3.1 |
acdCfmHistResultPktLossIDUnique value for each Delay variation Measurement instance. This value follows the ordering of the Dm table. Unsigned32 .1.3.6.1.4.1.22420.2.7.1.2.3.1.1 |
acdCfmHistResultPktLossSampleIndexAn index that uniquely identifies the particular sample this entry represents among all samples associated with the same PL instance. This index starts at 1 and increases by one as each new period. Unsigned32 .1.3.6.1.4.1.22420.2.7.1.2.3.1.2 |
acdCfmHistResultPktLossStatusIndicates the validity of the packet loss results during this sampling interval.ro Enumeration .1.3.6.1.4.1.22420.2.7.1.2.3.1.3 |
acdCfmHistResultPktLossDurationThe interval in seconds over which the data is sampled for this entry.ro Unsigned32 .1.3.6.1.4.1.22420.2.7.1.2.3.1.4 |
acdCfmHistResultPktLossIntervalEndThis is the time of the end of this entry.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.22420.2.7.1.2.3.1.5 |
acdCfmHistResultPktLossSamplesIndicates the number of samples gathered during the sampling interval to calculate packet loss results. This is a 32 bits counter. Combined with the overflow counter it provides the equivalent of the 64 bits counter acdCfmHistResultPktLossHCSamples.ro Counter32 .1.3.6.1.4.1.22420.2.7.1.2.3.1.6 |
acdCfmHistResultPktLossOverflowSamplesThe number of times the associated acdCfmHistResultPktLossSamples counter has overflowed during this sampling interval. This is a 32 bits counter. Combined with acdCfmHistResultPktLossSamples, it provides the equivalent of the 64 bits counter acdCfmHistResultPktLossHCSamples.ro Counter32 .1.3.6.1.4.1.22420.2.7.1.2.3.1.7 |
acdCfmHistResultPktLossHCSamplesIndicates the number of samples gathered during the sampling interval to calculate packet loss results.ro Counter64 .1.3.6.1.4.1.22420.2.7.1.2.3.1.8 |
acdCfmHistResultPktLossNbrLossThe total number of packets loss during this sampling interval. This is a 32 bits counter. Combined with the overflow counter it provides the equivalent of the 64 bits counter acdCfmHistResultPktLossHCNbrLoss.ro Counter32 .1.3.6.1.4.1.22420.2.7.1.2.3.1.9 |
acdCfmHistResultPktLossOverflowNbrLossThe number of times the associated acdCfmHistResultPktLossNbrLoss counter has overflowed during this sampling interval. This is a 32 bits counter. Combined with acdCfmHistResultPktLossNbrLoss, it provides the equivalent of the 64 bits counter acdCfmHistResultPktLossHCNbrLoss.ro Counter32 .1.3.6.1.4.1.22420.2.7.1.2.3.1.10 |
acdCfmHistResultPktLossHCNbrLossThe total number of packets loss during this sampling interval.ro Counter64 .1.3.6.1.4.1.22420.2.7.1.2.3.1.11 |
acdCfmHistResultPktLossNbrGapsThe total number of gap during this sampling interval. This is a 32 bits counter. Combined with the overflow counter it provides the equivalent of the 64 bits counter acdCfmHistResultPktLossHCNbrGaps.ro Counter32 .1.3.6.1.4.1.22420.2.7.1.2.3.1.12 |
acdCfmHistResultPktLossOverflowNbrGapsThe number of times the associated acdCfmHistResultPktLossNbrGaps counter has overflowed during this sampling interval. This is a 32 bits counter. Combined with acdCfmHistResultPktLossNbrGaps, it provides the equivalent of the 64 bits counter acdCfmHistResultPktLossHCNbrGaps.ro Counter32 .1.3.6.1.4.1.22420.2.7.1.2.3.1.13 |
acdCfmHistResultPktLossHCNbrGapsThe total number of gap during this sampling interval.ro Counter64 .1.3.6.1.4.1.22420.2.7.1.2.3.1.14 |
acdCfmHistResultPktLossLargestGapthe largest gap size in packets during this sampling interval. This is a 32 bits counter. Combined with the overflow counter it provides the equivalent of the 64 bits counter acdCfmHistResultPktLossHCNbrGaps.ro Counter32 .1.3.6.1.4.1.22420.2.7.1.2.3.1.15 |
acdCfmHistResultPktLossOverflowLargestGapThe number of times the associated acdCfmHistResultPktLossLargestGap counter has overflowed during this sampling interval. This is a 32 bits counter. Combined with acdCfmHistResultPktLossLargestGap, it provides the equivalent of the 64 bits counter acdCfmHistResultPktLossHCLargestGap.ro Counter32 .1.3.6.1.4.1.22420.2.7.1.2.3.1.16 |
acdCfmHistResultPktLossHCLargestGapthe largest gap size in packets during this sampling interval.ro Counter64 .1.3.6.1.4.1.22420.2.7.1.2.3.1.17 |
acdCfmHistResultPktLossRatioIndicates the packet loss ratio. The packet loss ratio is the percent of packets transmitted but not received in millionth of a percent (1,000,000 is 1%).ro Unsigned32 .1.3.6.1.4.1.22420.2.7.1.2.3.1.18 |
acdCfmMep OBJECT IDENTIFIER .1.3.6.1.4.1.22420.2.7.1.3 |
acdCfmMepStatsTxTableTransmit Statictics table of all MEP entries. SEQUENCE OF AcdCfmMepStatsTxEntry .1.3.6.1.4.1.22420.2.7.1.3.2 |
acdCfmMepStatsTxEntryAn entry consisting of all transmit statistics related to a MEP entry. AcdCfmMepStatsTxEntry .1.3.6.1.4.1.22420.2.7.1.3.2.1 |
acdCfmMepStatsTxIDUnique value for each MEP instance. This value follows the ordering of the MEP table. Unsigned32 .1.3.6.1.4.1.22420.2.7.1.3.2.1.1 |
acdCfmMepStatsTxCcmPduThis is a count of the total number of Continuity Check Message (CCM) PDU transmitted by the MEP (OpCode 1).ro Counter64 .1.3.6.1.4.1.22420.2.7.1.3.2.1.2 |
acdCfmMepStatsTxLbmPduThis is a count of the total number of LoopBack Message (LBM) PDU transmitted by the MEP (OpCode 3).ro Counter64 .1.3.6.1.4.1.22420.2.7.1.3.2.1.3 |
acdCfmMepStatsTxLbrPduThis is a count of the total number of LoopBack Reply (LBR) PDU transmitted by the MEP (OpCode 2).ro Counter64 .1.3.6.1.4.1.22420.2.7.1.3.2.1.4 |
acdCfmMepStatsTxLtmPduThis is a count of the total number of Link Trace Message (LTM) PDU transmitted by the MEP (OpCode 5).ro Counter64 .1.3.6.1.4.1.22420.2.7.1.3.2.1.5 |
acdCfmMepStatsTxLtrPduThis is a count of the total number of Link Trace Reply (LTR) PDU transmitted by the MEP (OpCode 4).ro Counter64 .1.3.6.1.4.1.22420.2.7.1.3.2.1.6 |
acdCfmMepStatsTxAisPduThis is a count of the total number of Alarm Indication Signal (AIS) PDU transmitted by the MEP (OpCode 33).ro Counter64 .1.3.6.1.4.1.22420.2.7.1.3.2.1.7 |
acdCfmMepStatsTxLckPduThis is a count of the total number of Locked (LCK) PDU transmitted by the MEP (OpCode 35).ro Counter64 .1.3.6.1.4.1.22420.2.7.1.3.2.1.8 |
acdCfmMepStatsTxTstPduThis is a count of the total number of Test (TST) PDU transmitted by the MEP (OpCode 37).ro Counter64 .1.3.6.1.4.1.22420.2.7.1.3.2.1.9 |
acdCfmMepStatsTxLinearApsPduThis is a count of the total number of linear Automatic Protection Switching (APS) PDU transmitted by the MEP (OpCode 39).ro Counter64 .1.3.6.1.4.1.22420.2.7.1.3.2.1.10 |
acdCfmMepStatsTxRingApsPduThis is a count of the total number of ring Automatic Protection Switching (APS) PDU transmitted by the MEP (OpCode 40).ro Counter64 .1.3.6.1.4.1.22420.2.7.1.3.2.1.11 |
acdCfmMepStatsTxMccPduThis is a count of the total number of Maintenance Communication Channel (MCC) PDU transmitted by the MEP (OpCode 41).ro Counter64 .1.3.6.1.4.1.22420.2.7.1.3.2.1.12 |
acdCfmMepStatsTxLmmPduThis is a count of the total number of Loss Measurement Message (LMM) PDU transmitted by the MEP (OpCode 43).ro Counter64 .1.3.6.1.4.1.22420.2.7.1.3.2.1.13 |
acdCfmMepStatsTxLmrPduThis is a count of the total number of Loss Measurement Reply (LMR) PDU transmitted by the MEP (OpCode 42).ro Counter64 .1.3.6.1.4.1.22420.2.7.1.3.2.1.14 |
acdCfmMepStatsTx1dmPduThis is a count of the total number of One-way Delay Measurement (1DM) PDU transmitted by the MEP (OpCode 45).ro Counter64 .1.3.6.1.4.1.22420.2.7.1.3.2.1.15 |
acdCfmMepStatsTxDmmPduThis is a count of the total number of Delay Measurement Message (DMM) PDU transmitted by the MEP (OpCode 47).ro Counter64 .1.3.6.1.4.1.22420.2.7.1.3.2.1.16 |
acdCfmMepStatsTxDmrPduThis is a count of the total number of Delay Measurement Reply (DMR) PDU transmitted by the MEP (OpCode 46).ro Counter64 .1.3.6.1.4.1.22420.2.7.1.3.2.1.17 |
acdCfmMepStatsTxExmPduThis is a count of the total number of EXperimental Message (EXM) PDU transmitted by the MEP (OpCode 49).ro Counter64 .1.3.6.1.4.1.22420.2.7.1.3.2.1.18 |
acdCfmMepStatsTxExrPduThis is a count of the total number of EXperimental Reply (EXR) PDU transmitted by the MEP (OpCode 48).ro Counter64 .1.3.6.1.4.1.22420.2.7.1.3.2.1.19 |
acdCfmMepStatsTxVsmPduThis is a count of the total number of Vendor Specific Message (VSM) PDU transmitted by the MEP (OpCode 51).ro Counter64 .1.3.6.1.4.1.22420.2.7.1.3.2.1.20 |
acdCfmMepStatsTxVsrPduThis is a count of the total number of Vendor Specific Reply (VSR) PDU transmitted by the MEP (OpCode 50).ro Counter64 .1.3.6.1.4.1.22420.2.7.1.3.2.1.21 |
acdCfmMepStatsTxCsfPduThis is a count of the total number of Client Signal Fail (CSF) PDU transmitted by the MEP (OpCode 52).ro Counter64 .1.3.6.1.4.1.22420.2.7.1.3.2.1.22 |
acdCfmMepStatsTxSlmPduThis is a count of the total number of Synthetic Loss Message (SLM) PDU transmitted by the MEP (OpCode 55).ro Counter64 .1.3.6.1.4.1.22420.2.7.1.3.2.1.23 |
acdCfmMepStatsTxSlrPduThis is a count of the total number of Synthetic Loss Reply (SLR) PDU transmitted by the MEP (OpCode 54).ro Counter64 .1.3.6.1.4.1.22420.2.7.1.3.2.1.24 |
acdCfmMepStatsRxTableReceive Statictics table of all MEP entries. SEQUENCE OF AcdCfmMepStatsRxEntry .1.3.6.1.4.1.22420.2.7.1.3.3 |
acdCfmMepStatsRxEntryAn entry consisting of all receive statistics related to a MEP entry. AcdCfmMepStatsRxEntry .1.3.6.1.4.1.22420.2.7.1.3.3.1 |
acdCfmMepStatsRxID. Unsigned32 .1.3.6.1.4.1.22420.2.7.1.3.3.1.1 |
acdCfmMepStatsRxCcmPduThis is a count of the total number of Continuity Check Message (CCM) PDU received by the MEP (OpCode 1).ro Counter64 .1.3.6.1.4.1.22420.2.7.1.3.3.1.2 |
acdCfmMepStatsRxLbmPduThis is a count of the total number of LoopBack Message (LBM) PDU received by the MEP (OpCode 3).ro Counter64 .1.3.6.1.4.1.22420.2.7.1.3.3.1.3 |
acdCfmMepStatsRxLbrPduThis is a count of the total number of LoopBack Reply (LBR) PDU received by the MEP (OpCode 2).ro Counter64 .1.3.6.1.4.1.22420.2.7.1.3.3.1.4 |
acdCfmMepStatsRxLtmPduThis is a count of the total number of Link Trace Message (LTM) PDU received by the MEP (OpCode 5).ro Counter64 .1.3.6.1.4.1.22420.2.7.1.3.3.1.5 |
acdCfmMepStatsRxLtrPduThis is a count of the total number of Link Trace Reply (LTR) PDU received by the MEP (OpCode 4).ro Counter64 .1.3.6.1.4.1.22420.2.7.1.3.3.1.6 |
acdCfmMepStatsRxAisPduThis is a count of the total number of Alarm Indication Signal (AIS) PDU received by the MEP (OpCode 33).ro Counter64 .1.3.6.1.4.1.22420.2.7.1.3.3.1.7 |
acdCfmMepStatsRxLckPduThis is a count of the total number of Locked (LCK) PDU received by the MEP (OpCode 35).ro Counter64 .1.3.6.1.4.1.22420.2.7.1.3.3.1.8 |
acdCfmMepStatsRxTstPduThis is a count of the total number of Test (TST) PDU received by the MEP (OpCode 37).ro Counter64 .1.3.6.1.4.1.22420.2.7.1.3.3.1.9 |
acdCfmMepStatsRxLinearApsPduThis is a count of the total number of linear Automatic Protection Switching (APS) PDU received by the MEP (OpCode 39).ro Counter64 .1.3.6.1.4.1.22420.2.7.1.3.3.1.10 |
acdCfmMepStatsRxRingApsPduThis is a count of the total number of ring Automatic Protection Switching (APS) PDU received by the MEP (OpCode 40).ro Counter64 .1.3.6.1.4.1.22420.2.7.1.3.3.1.11 |
acdCfmMepStatsRxMccPduThis is a count of the total number of Maintenance Communication Channel (MCC) PDU received by the MEP (OpCode 41).ro Counter64 .1.3.6.1.4.1.22420.2.7.1.3.3.1.12 |
acdCfmMepStatsRxLmmPduThis is a count of the total number of Loss Measurement Message (LMM) PDU received by the MEP (OpCode 43).ro Counter64 .1.3.6.1.4.1.22420.2.7.1.3.3.1.13 |
acdCfmMepStatsRxLmrPduThis is a count of the total number of Loss Measurement Reply (LMR) PDU received by the MEP (OpCode 42).ro Counter64 .1.3.6.1.4.1.22420.2.7.1.3.3.1.14 |
acdCfmMepStatsRx1dmPduThis is a count of the total number of One-way Delay Measurement (1DM) PDU received by the MEP (OpCode 45).ro Counter64 .1.3.6.1.4.1.22420.2.7.1.3.3.1.15 |
acdCfmMepStatsRxDmmPduThis is a count of the total number of Delay Measurement Message (DMM) PDU received by the MEP (OpCode 47).ro Counter64 .1.3.6.1.4.1.22420.2.7.1.3.3.1.16 |
acdCfmMepStatsRxDmrPduThis is a count of the total number of Delay Measurement Reply (DMR) PDU received by the MEP (OpCode 46).ro Counter64 .1.3.6.1.4.1.22420.2.7.1.3.3.1.17 |
acdCfmMepStatsRxExmPduThis is a count of the total number of EXperimental Message (EXM) PDU received by the MEP (OpCode 49).ro Counter64 .1.3.6.1.4.1.22420.2.7.1.3.3.1.18 |
acdCfmMepStatsRxExrPduThis is a count of the total number of EXperimental Reply (EXR) PDU received by the MEP (OpCode 48).ro Counter64 .1.3.6.1.4.1.22420.2.7.1.3.3.1.19 |
acdCfmMepStatsRxVsmPduThis is a count of the total number of Vendor Specific Message (VSM) PDU received by the MEP (OpCode 51).ro Counter64 .1.3.6.1.4.1.22420.2.7.1.3.3.1.20 |
acdCfmMepStatsRxVsrPduThis is a count of the total number of Vendor Specific Reply (VSR) PDU received by the MEP (OpCode 50).ro Counter64 .1.3.6.1.4.1.22420.2.7.1.3.3.1.21 |
acdCfmMepStatsRxCcmSeqErrorsThe total number of out-of-sequence CCMs received from all remote MEPs.ro Counter64 .1.3.6.1.4.1.22420.2.7.1.3.3.1.22 |
acdCfmMepStatsRxLtrUnexpectedPduThe total number of LTRs received when no linktrace request is active for that MEP.ro Counter64 .1.3.6.1.4.1.22420.2.7.1.3.3.1.23 |
acdCfmMepStatsRxLtrMacErrorsThe total number of Link Trace Replies dropped because of bad MAC address.ro Counter64 .1.3.6.1.4.1.22420.2.7.1.3.3.1.24 |
acdCfmMepStatsRxLbrOooErrorsThe total number of valid, out-of-order Loopback Replies received.ro Counter64 .1.3.6.1.4.1.22420.2.7.1.3.3.1.25 |
acdCfmMepStatsRxLbrUnexpectedPduThe total number of LBRs received when no loopback request is active for that MEP.ro Counter64 .1.3.6.1.4.1.22420.2.7.1.3.3.1.26 |
acdCfmMepStatsRxLbrDataErrorsThe total number of LBRs received whose MACService Data Unit did not match (except for the OpCode) that of the corresponding LBM.ro Counter64 .1.3.6.1.4.1.22420.2.7.1.3.3.1.27 |
acdCfmMepStatsRxCsfPduThis is a count of the total number of Client Signal Fail (CSF) PDU received by the MEP (OpCode 52).ro Counter64 .1.3.6.1.4.1.22420.2.7.1.3.3.1.28 |
acdCfmMepStatsRxSlmPduThis is a count of the total number of Synthetic Loss Message (SLM) PDU received by the MEP (OpCode 55).ro Counter64 .1.3.6.1.4.1.22420.2.7.1.3.3.1.29 |
acdCfmMepStatsRxSlrPduThis is a count of the total number of Synthetic Loss Reply (SLR) PDU received by the MEP (OpCode 54).ro Counter64 .1.3.6.1.4.1.22420.2.7.1.3.3.1.30 |
acdCfmMepDmStatsTableTransmit DMM/DMR statictics per priority table for a MEP entry. SEQUENCE OF AcdCfmMepDmStatsEntry .1.3.6.1.4.1.22420.2.7.1.3.4 |
acdCfmMepDmStatsEntryAn entry consisting of all DMM/DMR statistics related to a MEP entry. AcdCfmMepDmStatsEntry .1.3.6.1.4.1.22420.2.7.1.3.4.1 |
acdCfmMepDmStatsIDUnique value for each MEP instance. This value follows the ordering of the MEP table. Same as acdCfmMepStatsTxID and acdCfmMepStatsRxID. Unsigned32 .1.3.6.1.4.1.22420.2.7.1.3.4.1.1 |
acdCfmMepDmStatsPriorityUnique value for each priority level. Unsigned32 .1.3.6.1.4.1.22420.2.7.1.3.4.1.2 |
acdCfmMepDmStatsTxDmmPduThis is a count of the total number of Delay Measurement Message (DMM) (OpCode 47) PDU transmitted by the MEP for this specific priority level.ro Counter64 .1.3.6.1.4.1.22420.2.7.1.3.4.1.3 |
acdCfmMepDmStatsRxDmmPduThis is a count of the total number of Delay Measurement Message (DMM) (OpCode 47) PDU received by the MEP for this specific priority level.ro Counter64 .1.3.6.1.4.1.22420.2.7.1.3.4.1.4 |
acdCfmMepDmStatsTxDmrPduThis is a count of the total number of Delay Measurement Reply (DMR) (OpCode 46) PDU transmitted by the MEP for this specific priority level.ro Counter64 .1.3.6.1.4.1.22420.2.7.1.3.4.1.5 |
acdCfmMepDmStatsRxDmrPduThis is a count of the total number of Delay Measurement Reply (DMR) (OpCode 46) PDU received by the MEP for this specific priority level.ro Counter64 .1.3.6.1.4.1.22420.2.7.1.3.4.1.6 |
acdCfmStack OBJECT IDENTIFIER .1.3.6.1.4.1.22420.2.7.1.4 |
acdCfmStackTableConfiguration table of stack entries. SEQUENCE OF AcdCfmStackEntry .1.3.6.1.4.1.22420.2.7.1.4.1 |
acdCfmStackEntryAn entry consisting of all informations to tie together. AcdCfmStackEntry .1.3.6.1.4.1.22420.2.7.1.4.1.1 |
acdCfmMdIdxMaintenance Domain(MD) index from table dot1agCfmMepTable in IEEE8021-CFM-MIB. Unsigned32 .1.3.6.1.4.1.22420.2.7.1.4.1.1.1 |
acdCfmMaIdxMaintenance Association(MA) index from table dot1agCfmMepTable in IEEE8021-CFM-MIB. Unsigned32 .1.3.6.1.4.1.22420.2.7.1.4.1.1.2 |
acdCfmMepIDMaintenance End Point(Mep) index from table dot1agCfmMepTable in IEEE8021-CFM-MIB. Unsigned32 .1.3.6.1.4.1.22420.2.7.1.4.1.1.3 |
acdCfmMepIdxMaintenance End Point(Mep) index from table acdCfmDmCfgTable in ACD-CFM-MIB.ro Unsigned32 .1.3.6.1.4.1.22420.2.7.1.4.1.1.4 |
acdCfmSlm OBJECT IDENTIFIER .1.3.6.1.4.1.22420.2.7.1.5 |
acdCfmSlmCfgTableConfiguration table of all SLM entries. SEQUENCE OF AcdCfmSlmCfgEntry .1.3.6.1.4.1.22420.2.7.1.5.1 |
acdCfmSlmCfgEntryAn entry consisting of all settings to manage a SLM instance. AcdCfmSlmCfgEntry .1.3.6.1.4.1.22420.2.7.1.5.1.1 |
acdCfmSlmCfgIDUnique value for each SLM instance. This value follows the ordering the results table. Unsigned32 .1.3.6.1.4.1.22420.2.7.1.5.1.1.1 |
acdCfmSlmCfgRowStatusThe writable columns in a row can not be changed if the row is active. All columns must have a valid value before a row can be activated.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.22420.2.7.1.5.1.1.2 |
acdCfmSlmCfgMepIdxMaintenance association End Point Identifier.ro Unsigned32 .1.3.6.1.4.1.22420.2.7.1.5.1.1.3 |
acdCfmSlmCfgRemoteMepIdRemote Maintenance association End Point Identifier.ro Unsigned32 .1.3.6.1.4.1.22420.2.7.1.5.1.1.4 |
acdCfmSlmCfgPriorityThe VLAN priority. Its value ranges from 0 to 7.ro Unsigned32 .1.3.6.1.4.1.22420.2.7.1.5.1.1.5 |
acdCfmSlmCfgStateState of the SLM instancero TruthValue (SNMPv2-TC) .1.3.6.1.4.1.22420.2.7.1.5.1.1.6 |
acdCfmSlmCfgIntervalInterval in milliseconds at which CFM issues Synthetic Loss Measurement packets.ro Unsigned32 .1.3.6.1.4.1.22420.2.7.1.5.1.1.7 |
acdCfmSlmCfgRefPeriodReference period in minutes for Synthetic Loss Measurement.ro Unsigned32 .1.3.6.1.4.1.22420.2.7.1.5.1.1.8 |
acdCfmSlmCfgNearEndThreshNear end packet loss ratio threshold allowed without issuing an alarm expressed in millionth of percent (1,000,000 is 1%).ro Unsigned32 .1.3.6.1.4.1.22420.2.7.1.5.1.1.9 |
acdCfmSlmCfgFarEndThreshFar end packet loss ratio threshold allowed without issuing an alarm expressed in millionth of percent (1,000,000 is 1%).ro Unsigned32 .1.3.6.1.4.1.22420.2.7.1.5.1.1.10 |
acdCfmSlmCfgNameThe name of the instancero DisplayString .1.3.6.1.4.1.22420.2.7.1.5.1.1.11 |
acdCfmSlmResultTableSLM result table of a MEP and remote MEP pair. SEQUENCE OF AcdCfmSlmResultEntry .1.3.6.1.4.1.22420.2.7.1.5.2 |
acdCfmSlmResultEntryAn entry consisting of SLM result for a specific MEP and remote MEP pair. AcdCfmSlmResultEntry .1.3.6.1.4.1.22420.2.7.1.5.2.1 |
acdCfmSlmResultIDUnique value for each SLM instance. This value follows the ordering of the SLM table. Unsigned32 .1.3.6.1.4.1.22420.2.7.1.5.2.1.1 |
acdCfmSlmResultPeriodIndexAn index that uniquely identifies the particular sample this entry represents among all samples associated with the same PL instance. This index starts at 1 and increases by one as each new period.ro Unsigned32 .1.3.6.1.4.1.22420.2.7.1.5.2.1.2 |
acdCfmSlmResultIntervalStartThis is the time of the start of the period.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.22420.2.7.1.5.2.1.3 |
acdCfmSlmResultValidReserved for future use.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.22420.2.7.1.5.2.1.4 |
acdCfmSlmResultNearEndAlertIndicate the presence of the SLM near end alert.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.22420.2.7.1.5.2.1.5 |
acdCfmSlmResultFarEndAlertIndicate the presence of the SLM far end alert.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.22420.2.7.1.5.2.1.6 |
acdCfmSlmResultTxSlmIndicates the number of SLM frames sent.ro Counter32 .1.3.6.1.4.1.22420.2.7.1.5.2.1.7 |
acdCfmSlmResultRxSlrIndicates the number of SLR frames received.ro Counter32 .1.3.6.1.4.1.22420.2.7.1.5.2.1.8 |
acdCfmSlmResultRemoteRxSlmIndicates the number of SLM frames received at the far end.ro Counter32 .1.3.6.1.4.1.22420.2.7.1.5.2.1.9 |
acdCfmSlmResultNearEndNbrLossThis is the number of packets lost at the near end.ro Counter32 .1.3.6.1.4.1.22420.2.7.1.5.2.1.10 |
acdCfmSlmResultFarEndNbrLossThis is the number of packets lost at the far end.ro Counter32 .1.3.6.1.4.1.22420.2.7.1.5.2.1.11 |
acdCfmSlmResultNearEndRatioThis is the packet loss ratio at the near end.ro Gauge32 .1.3.6.1.4.1.22420.2.7.1.5.2.1.12 |
acdCfmSlmResultFarEndRatioThis is the packet loss ratio at the far end.ro Gauge32 .1.3.6.1.4.1.22420.2.7.1.5.2.1.13 |
acdCfmSlmResultNbrGapsThis is the number of gap.ro Counter32 .1.3.6.1.4.1.22420.2.7.1.5.2.1.14 |
acdCfmSlmResultLargestGapThis is the largest gap.ro Counter32 .1.3.6.1.4.1.22420.2.7.1.5.2.1.15 |
acdCfmSlmHistResultTableSLM history result table of a MEP and remote MEP pair. SEQUENCE OF AcdCfmSlmHistResultEntry .1.3.6.1.4.1.22420.2.7.1.5.3 |
acdCfmSlmHistResultEntryAn entry consisting of SLM history result for a specific MEP and remote MEP pair. AcdCfmSlmHistResultEntry .1.3.6.1.4.1.22420.2.7.1.5.3.1 |
acdCfmSlmHistResultIDUnique value for each SLM instance. This value follows the ordering of the SLM table. Unsigned32 .1.3.6.1.4.1.22420.2.7.1.5.3.1.1 |
acdCfmSlmHistResultPeriodIndexAn index that uniquely identifies the particular sample this entry represents among all samples associated with the same PL instance. This index starts at 1 and increases by one as each new period.ro Unsigned32 .1.3.6.1.4.1.22420.2.7.1.5.3.1.2 |
acdCfmSlmHistResultIntervalEndThis is the time of the end of the period.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.22420.2.7.1.5.3.1.3 |
acdCfmSlmHistResultTxSlmIndicates the number of SLM frames sent.ro Counter32 .1.3.6.1.4.1.22420.2.7.1.5.3.1.4 |
acdCfmSlmHistResultRxSlrIndicates the number of SLR frames received.ro Counter32 .1.3.6.1.4.1.22420.2.7.1.5.3.1.5 |
acdCfmSlmHistResultRemoteRxSlmIndicates the number of SLM frames received at the far end.ro Counter32 .1.3.6.1.4.1.22420.2.7.1.5.3.1.6 |
acdCfmSlmHistResultNearEndRatioThis is the packet loss ratio at the near end.ro Gauge32 .1.3.6.1.4.1.22420.2.7.1.5.3.1.7 |
acdCfmSlmHistResultFarEndRatioThis is the packet loss ratio at the far end.ro Gauge32 .1.3.6.1.4.1.22420.2.7.1.5.3.1.8 |
acdCfmSlmHistResultNbrGapsThis is the number of gap.ro Counter32 .1.3.6.1.4.1.22420.2.7.1.5.3.1.9 |
acdCfmSlmHistResultLargestGapThis is the largest gap.ro Counter32 .1.3.6.1.4.1.22420.2.7.1.5.3.1.10 |
acdCfmSlmHistResultInstanceIndexThe instance index. Unsigned32 .1.3.6.1.4.1.22420.2.7.1.5.3.1.11 |
acdCfmConformance OBJECT IDENTIFIER .1.3.6.1.4.1.22420.2.7.2 |
acdCfmCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.22420.2.7.2.1 |
acdCfmComplianceThe compliance statement for support of the ACD-CFM-MIB module. Unknown .1.3.6.1.4.1.22420.2.7.2.1.1 |
acdCfmGroups OBJECT IDENTIFIER .1.3.6.1.4.1.22420.2.7.2.2 |
acdCfmDmCfgGroupObjects for the Delay Measurement configuration Group. Unknown .1.3.6.1.4.1.22420.2.7.2.2.1 |
acdCfmResultOneWayDelayGroupObjects for the One Way Delay result Group. Unknown .1.3.6.1.4.1.22420.2.7.2.2.2 |
acdCfmResultOneWayDvGroupObjects for the One Way Delay variation result Group. Unknown .1.3.6.1.4.1.22420.2.7.2.2.3 |
acdCfmResultTwoWayDelayGroupObjects for the Two Way Delay result Group. Unknown .1.3.6.1.4.1.22420.2.7.2.2.4 |
acdCfmResultTwoWayDvGroupObjects for the Two Way Delay varition result Group. Unknown .1.3.6.1.4.1.22420.2.7.2.2.5 |
acdCfmHistResultOneWayDelayGroupObjects for the One Way Delay history result Group. Unknown .1.3.6.1.4.1.22420.2.7.2.2.6 |
acdCfmHistResultOneWayDvGroupObjects for the One Way Delay variation history result Group. Unknown .1.3.6.1.4.1.22420.2.7.2.2.7 |
acdCfmHistResultTwoWayDelayGroupObjects for the Two Way Delay history result Group. Unknown .1.3.6.1.4.1.22420.2.7.2.2.8 |
acdCfmHistResultTwoWayDvGroupObjects for the Two Way Delay variation history result Group. Unknown .1.3.6.1.4.1.22420.2.7.2.2.9 |
acdCfmPktLossCfgGroupObjects for Packet loss configuration Group. Unknown .1.3.6.1.4.1.22420.2.7.2.2.10 |
acdCfmResultPktLossGroupObjects for Packet loss result Group. Unknown .1.3.6.1.4.1.22420.2.7.2.2.11 |
acdCfmHistResultPktLossGroupObjects for Packet loss history result Group. Unknown .1.3.6.1.4.1.22420.2.7.2.2.12 |
acdCfmMepStatsTxGroupObjects for MEP transmit statistics Group. Unknown .1.3.6.1.4.1.22420.2.7.2.2.13 |
acdCfmMepStatsRxGroupObjects for MEP receive statistics Group. Unknown .1.3.6.1.4.1.22420.2.7.2.2.14 |
acdCfmMepDmStatsGroupObjects for DMM/DMR MEP statistics Group. Unknown .1.3.6.1.4.1.22420.2.7.2.2.15 |
acdCfmMepStackGroupObjects for cfm Stack Group. Unknown .1.3.6.1.4.1.22420.2.7.2.2.16 |
acdCfmMepSlmStatsGroupObjects for SLM/SLR MEP statistics Group. Unknown .1.3.6.1.4.1.22420.2.7.2.2.17 |
acdCfmSlmCfgGroupObjects for SLM configuration Group. Unknown .1.3.6.1.4.1.22420.2.7.2.2.18 |
acdCfmSlmResultGroupObjects for SLM result Group. Unknown .1.3.6.1.4.1.22420.2.7.2.2.19 |
acdCfmSlmHistResultGroupObjects for SLM history result Group. Unknown .1.3.6.1.4.1.22420.2.7.2.2.20 |