NTRON714FX6-MIB
AI MIB Summary
The NTRON714FX6-MIB module enables SNMP-based monitoring and management of Ntron 714FX6 series network devices, specifically defining standard metrics for port sequence status and system notifications. It facilitates the collection of device-specific identifiers and the reception of trap notifications to track operational states and fault conditions within the Ntron hardware environment.
Added ntron and series specific identifiers, fixed port Sequence and changed TRAP-TYPE to NOTIFICATION-TYPE
Main OID:
ntron714fx6.1.3.6.1.4.1.28381.700.7
101
Objects
Active
Status
2
Dependencies
Imported Objects
Objects
101 total| Object Name |
|---|
ntron OBJECT IDENTIFIER .1.3.6.1.4.1.28381 |
ntron7xx OBJECT IDENTIFIER .1.3.6.1.4.1.28381.700 |
ntron714fx6Added ntron and series specific identifiers, fixed port Sequence and changed TRAP-TYPE to NOTIFICATION-TYPE MODULE-IDENTITY .1.3.6.1.4.1.28381.700.7 |
ntronSysGroup OBJECT IDENTIFIER .1.3.6.1.4.1.28381.700.7.1 |
ntronSysResetSetting this object to 'switchReset' will cause the switch to perform a hardware reset within approximately 4-6 seconds.Setting this object to 'switchNoReset ' will have no effect.The value 'switchNoReset' will be returned whenever this object is retrieved .rw Enumeration .1.3.6.1.4.1.28381.700.7.1.1 |
ntronSwVersionThis object identifies the Version Number of Current Release.ro DisplayString .1.3.6.1.4.1.28381.700.7.1.2 |
ntronBuildDateAndTimeThis object will hold the image build date and time.ro DisplayString .1.3.6.1.4.1.28381.700.7.1.3 |
ntronTotalRamThis object will give the total RAM available in the system.ro Integer32 .1.3.6.1.4.1.28381.700.7.1.4 |
ntronTotalFlashThis object will give the total Flash available in system.ro Integer32 .1.3.6.1.4.1.28381.700.7.1.5 |
ntronEthernetPortCountThis object will return the number of 10/100 Mbps Ethernet ports on the switch.ro Integer32 .1.3.6.1.4.1.28381.700.7.1.6 |
ntronCurrentIpAddressThe Current IP address is the one which is currently used and is obtained dynamically through protocol interaction.( DHCP ) This address is NULL if the Address is Statically configured.ro IpAddress .1.3.6.1.4.1.28381.700.7.1.7 |
ntronConfiguredIpAddressThe Configured IP address of the device. This is the address configured through Network or cli.rw IpAddress .1.3.6.1.4.1.28381.700.7.1.8 |
ntronConfiguredSubnetMaskThe Configured Subnet Mask of the device.rw IpAddress .1.3.6.1.4.1.28381.700.7.1.9 |
ntronConfiguredGatewayThe Configured Gateway/Router address of the devicerw IpAddress .1.3.6.1.4.1.28381.700.7.1.10 |
ntronUpdateConfiguredIpAddrBy setting this object to enable will update the ipaddress, subnetmask and the router ip address.rw Enumeration .1.3.6.1.4.1.28381.700.7.1.11 |
ntronIPAddressStatusThe IP Address can be obtained/configured by any of the above different ways. This object specifies how IP address currently on the switch , was configured/obtained.ro Enumeration .1.3.6.1.4.1.28381.700.7.1.12 |
ntronTotalNoOfPortsThis object will give the total number of ports available in the device .ro Integer32 .1.3.6.1.4.1.28381.700.7.1.13 |
ntronMacAddressThe mac address of the system .ro DisplayString .1.3.6.1.4.1.28381.700.7.1.14 |
ntronContactStatusThe status of the switch contact .ro Enumeration .1.3.6.1.4.1.28381.700.7.1.15 |
ntronPowerFaultThe power fault status .ro Enumeration .1.3.6.1.4.1.28381.700.7.1.16 |
ntronModelStringThis object will hold the switch model string.ro DisplayString .1.3.6.1.4.1.28381.700.7.1.17 |
ntronBlVersionThis object identifies the Version Number of Current Bootloader Release.ro DisplayString .1.3.6.1.4.1.28381.700.7.1.18 |
ntronNViewGroup OBJECT IDENTIFIER .1.3.6.1.4.1.28381.700.7.2 |
ntronNViewStateGlobal status of NView broadcasts.rw Enumeration .1.3.6.1.4.1.28381.700.7.2.1 |
ntronNViewIntervalGlobal interval between NView broadcasts.rw Integer32 .1.3.6.1.4.1.28381.700.7.2.2 |
ntronNViewTableThe table that contains the information about the per port NView status. SEQUENCE OF NtronNViewEntry .1.3.6.1.4.1.28381.700.7.2.3 |
ntronNViewEntryAn entry in the ntronNViewTable. NtronNViewEntry .1.3.6.1.4.1.28381.700.7.2.3.1 |
ntronNViewPortNumberThe unique identifier to identify the entry in the ntronNViewTable.ro Integer32 .1.3.6.1.4.1.28381.700.7.2.3.1.1 |
ntronNViewMulticastThe status of a port for transmitting NView packets.rw Enumeration .1.3.6.1.4.1.28381.700.7.2.3.1.2 |
ntronNViewStatsThe status of a port for having its stats sent as NView packets.rw Enumeration .1.3.6.1.4.1.28381.700.7.2.3.1.3 |
ntronTFTPGroup OBJECT IDENTIFIER .1.3.6.1.4.1.28381.700.7.3 |
ntronTFTPServerIpAddressThe ipaddress of the Tftp server.rw IpAddress .1.3.6.1.4.1.28381.700.7.3.1 |
ntronTFTPRemoteFileNameThe field gives the file name to be downloaded.rw DisplayString .1.3.6.1.4.1.28381.700.7.3.2 |
ntronTFTPActionSetting this object to the value mentioned above will cause the specific function to be called. When performing config actions either the config flags below or the same defaults as on the web will be used if not set as below.rw Enumeration .1.3.6.1.4.1.28381.700.7.3.3 |
ntronTFTPConfigFlagsIf not manually set by the user the web default values will be used in the above action. Flags are reset to use the default values when ntronTFTPAction is completerw Enumeration .1.3.6.1.4.1.28381.700.7.3.4 |
ntronPortMirroringGroup OBJECT IDENTIFIER .1.3.6.1.4.1.28381.700.7.7 |
ntronMirroringStateThis Field gives the current state of the mirror. Setting this object to an value enable the mirror .If disabled, port operation works normally. No Traffic gets routed from MirroringSourcePort to Destination Mirrored Port.rw Enumeration .1.3.6.1.4.1.28381.700.7.7.1 |
ntronMirroringDestinationPortThis is the Destination port number for which there is another mirror port.If the ntronMirroringState is Enabled then the mirror port gets routed with all the packets going in and out of Destination port. This arrangement is to put an RMON Probe on mirrored port to Probe the traffic on the Destination port. One of the port is dedicated to this so that for any port as destination port, this dedicated port can be a mirrored port. This object will return a '0' if the MirrorState is not enabled.rw Integer32 .1.3.6.1.4.1.28381.700.7.7.2 |
ntronPortMirroringTableThe table which contains the mirroring information of the ports . SEQUENCE OF NtronPortMirroringEntry .1.3.6.1.4.1.28381.700.7.7.3 |
ntronPortMirroringEntryAn entry in the ntronPortMirroringTable. NtronPortMirroringEntry .1.3.6.1.4.1.28381.700.7.7.3.1 |
ntronPortMirroringNoThis object identifies the port of the switch.ro Integer32 .1.3.6.1.4.1.28381.700.7.7.3.1.1 |
ntronPortMirroringTxThis object shows the mirror Tx status of the port.rw Integer32 .1.3.6.1.4.1.28381.700.7.7.3.1.2 |
ntronPortMirroringRxThis object shows the mirror Rx status of the port.rw Integer32 .1.3.6.1.4.1.28381.700.7.7.3.1.3 |
ntronPortConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.28381.700.7.8 |
ntronPortConfigTableThe table which contains the statistics information of the ports. SEQUENCE OF NtronPortConfigEntry .1.3.6.1.4.1.28381.700.7.8.1 |
ntronPortConfigEntryAn entry in the ntronPortStatisticsTable. NtronPortConfigEntry .1.3.6.1.4.1.28381.700.7.8.1.1 |
ntronPortNoThis object identifies the port of the switch.ro Integer32 .1.3.6.1.4.1.28381.700.7.8.1.1.1 |
ntronPortNameThis attribute associates a user defined string name with the port.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.28381.700.7.8.1.1.2 |
ntronPortAdminStateThis attribute allows an administrative request to disable or enable communications on this port.rw Enumeration .1.3.6.1.4.1.28381.700.7.8.1.1.3 |
ntronPortSpeedThis attribute allows an administrative request to read/write the speed of this port.rw Enumeration .1.3.6.1.4.1.28381.700.7.8.1.1.4 |
ntronPortDuplexStatusThis attribute allows an administrative request to read the status of Duplex on this port.rw Enumeration .1.3.6.1.4.1.28381.700.7.8.1.1.5 |
ntronPortLinkStateThis attribute allows an administrative request to read the status of link state on this port.ro Enumeration .1.3.6.1.4.1.28381.700.7.8.1.1.6 |
ntronPortPriorityThis attribute allows an administrative request to read/write the Priority of the port.rw Integer32 .1.3.6.1.4.1.28381.700.7.8.1.1.7 |
ntronPortFlowControlThis per-port attribute describes whether the port identified has flow Control Enabled or not. Flow Control on Full Duplex and Half Duplex is detected and Automatically, flow control accordingly is taken care of. BY Default, Flow Control is Disabled.rw Enumeration .1.3.6.1.4.1.28381.700.7.8.1.1.8 |
ntronPortBackPressureThis per-port attribute describes whether the port identified has BackPressure Enabled or not. BY Default, BackPressure is Disabled.rw Enumeration .1.3.6.1.4.1.28381.700.7.8.1.1.9 |
ntronPortAutonegotiationThis per-port attribute describes whether the port identified has AutoNegotiation Enabled or not. BY Default, BackPressure is Disabled.rw Enumeration .1.3.6.1.4.1.28381.700.7.8.1.1.10 |
ntronPortOverWritePriorityThis per-port attribute describes whether the port identified has OverWritePriority Enabled or not. BY Default, BackPressure is Disabled.rw Enumeration .1.3.6.1.4.1.28381.700.7.8.1.1.11 |
ntronPortPVIDThis is the port VLAN ID.rw Integer32 .1.3.6.1.4.1.28381.700.7.8.1.1.12 |
ntronPortCrossoverThis is the port setting for Crossover.rw Enumeration .1.3.6.1.4.1.28381.700.7.8.1.1.13 |
ntronIgmpGroup OBJECT IDENTIFIER .1.3.6.1.4.1.28381.700.7.9 |
ntronIgmpStateThis object holds the current state of the igmp. By configuring this to Enable, the igmp will be enabled.rw Enumeration .1.3.6.1.4.1.28381.700.7.9.1 |
ntronQueryModeTo set the switch's query mode.rw Enumeration .1.3.6.1.4.1.28381.700.7.9.2 |
ntronRouterModeTo set the switch's router mode.rw Enumeration .1.3.6.1.4.1.28381.700.7.9.3 |
ntronIgmpMemberTableThe table that contains the information about the igmp members. SEQUENCE OF NtronIgmpMemberEntry .1.3.6.1.4.1.28381.700.7.9.4 |
ntronIgmpMemberEntryAn entry in the igmp member table. NtronIgmpMemberEntry .1.3.6.1.4.1.28381.700.7.9.4.1 |
ntronIgmpMemberTableIndexThe unique identifier to identify the igmp member.ro Integer32 .1.3.6.1.4.1.28381.700.7.9.4.1.1 |
ntronIgmpGroupIpAddressThe IpAddress of the Multicast Group.ro IpAddress .1.3.6.1.4.1.28381.700.7.9.4.1.2 |
ntronIgmpPortNumberThe port number from which the multicast Ip is received.ro Integer32 .1.3.6.1.4.1.28381.700.7.9.4.1.3 |
ntronIgmpVlanIdThe Vlan Id to which the igmpPortNumber belongs.ro Integer32 .1.3.6.1.4.1.28381.700.7.9.4.1.4 |
ntronIgmpRouterTableThe table that contains the information about the igmp routers. SEQUENCE OF NtronIgmpRouterEntry .1.3.6.1.4.1.28381.700.7.9.5 |
ntronIgmpRouterEntryAn entry in the igmp router table. NtronIgmpRouterEntry .1.3.6.1.4.1.28381.700.7.9.5.1 |
ntronIgmpRouterTableIndexThe unique identifier to identify the igmp router.ro Integer32 .1.3.6.1.4.1.28381.700.7.9.5.1.1 |
ntronIgmpRouterIpAddressThe IpAddress of the Router.ro IpAddress .1.3.6.1.4.1.28381.700.7.9.5.1.2 |
ntronIgmpRouterPortNumberThe port no from which the router query has been received.ro Integer32 .1.3.6.1.4.1.28381.700.7.9.5.1.3 |
ntronIgmpPortTableThe table that contains the information about the igmp port status. SEQUENCE OF NtronIgmpPortEntry .1.3.6.1.4.1.28381.700.7.9.6 |
ntronIgmpPortEntryAn entry in the igmp port table. NtronIgmpPortEntry .1.3.6.1.4.1.28381.700.7.9.6.1 |
ntronIgmpPortTableIndexThe unique identifier to identify the igmp port.ro Integer32 .1.3.6.1.4.1.28381.700.7.9.6.1.1 |
ntronIgmpPortManRouterPer-Port Attribute for if the port is a Manual Router Portrw Enumeration .1.3.6.1.4.1.28381.700.7.9.6.1.2 |
ntronIgmpPortRFilterPer-Port Attribute for if the port has RFilter enabledrw Enumeration .1.3.6.1.4.1.28381.700.7.9.6.1.3 |
ntronBroadcastGroup OBJECT IDENTIFIER .1.3.6.1.4.1.28381.700.7.13 |
ntronBroadcastBPCLTableThe table that contains the information about the best packet count limit. SEQUENCE OF NtronBroadcastBPCLEntry .1.3.6.1.4.1.28381.700.7.13.1 |
ntronBroadcastBPCLEntryAn entry in the ntronBroadcastBPCLTable. NtronBroadcastBPCLEntry .1.3.6.1.4.1.28381.700.7.13.1.1 |
ntronBroadcastPortNumberThe unique identifier to identify the entry in the ntronBroadcastBPCLTable.ro Integer32 .1.3.6.1.4.1.28381.700.7.13.1.1.1 |
ntronBroadcastPercentageThe percentage of broadcast packets that can be allowed.rw Integer32 .1.3.6.1.4.1.28381.700.7.13.1.1.2 |
ntronConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.28381.700.7.14 |
ntronConfigSaveIf this configurable object is set to enable then all the Configured data of the all the modules is written into flash.rw Enumeration .1.3.6.1.4.1.28381.700.7.14.1 |
ntronConfigEraseSetting this object to the value mentioned above will cause the specific function to be called. When performing the enable action either the config flags below or the same defaults as on the web will be used if not set as below. Any of the other options will ignore the below flags and do as they are describedrw Enumeration .1.3.6.1.4.1.28381.700.7.14.2 |
ntronConfigEraseFlagsIf not manually set by the user the web default values will be used in the above action. Flags are reset to use the default values when ntronConfigErase is completerw Enumeration .1.3.6.1.4.1.28381.700.7.14.3 |
ntronSnmpGroup OBJECT IDENTIFIER .1.3.6.1.4.1.28381.700.7.15 |
ntronSnmpGetCommunityNameThe community name used to authenticate the get/getnext request from snmp Manager.rw DisplayString .1.3.6.1.4.1.28381.700.7.15.1 |
ntronSnmpTrapCommunityNameThe community name used to authenticate the Trap request to snmp Manager.rw DisplayString .1.3.6.1.4.1.28381.700.7.15.2 |
ntronSnmpManagerIpAddressTableThe ip address table of the snmp managers. SEQUENCE OF NtronSnmpManagerIpAddressEntry .1.3.6.1.4.1.28381.700.7.15.3 |
ntronSnmpManagerIpAddressEntryAn entry in the ntronSnmpManagerIpAddressTable NtronSnmpManagerIpAddressEntry .1.3.6.1.4.1.28381.700.7.15.3.1 |
ntronSnmpManagerTableIndexThe index of the snmp manager.ro Integer32 .1.3.6.1.4.1.28381.700.7.15.3.1.1 |
ntronSnmpManagerIpAddressThe Ip Address of the snmp Manager.rw IpAddress .1.3.6.1.4.1.28381.700.7.15.3.1.2 |
ntronNRingGroup OBJECT IDENTIFIER .1.3.6.1.4.1.28381.700.7.16 |
ntronNRingModeOperational mode of NRing system.ro Enumeration .1.3.6.1.4.1.28381.700.7.16.1 |
ntronNRingStateStatus of NRing system.ro Enumeration .1.3.6.1.4.1.28381.700.7.16.2 |
ntronNRingVersionVersion of NRing system.ro Integer32 .1.3.6.1.4.1.28381.700.7.16.3 |
ntronTrapGroup OBJECT IDENTIFIER .1.3.6.1.4.1.28381.700.7.18 |
ntronPowerChangeAn ntronPowerChange trap signifies that the sending SNMP application entity recognizes a change in the power fault variable either from a power failure or a restoration of power. NOTIFICATION-TYPE .1.3.6.1.4.1.28381.700.7.18.1 |