PRVT-CFM-MIB
AI MIB Summary
The PRVT-CFM-MIB extends the standard IEEE 802.1ag Connectivity Fault Management framework to monitor private service instance states, including Maintenance Association (MA) and Maintenance Endpoint (MEP) operational status, continuity check (CCM) reception counters, and fault alarm conditions for Layer 2 Ethernet services.
Prvt extension of Connectivity Fault Management module for managing IEEE 802.1ag
Main OID:
prvtCfmMib.1.3.6.1.4.1.6321.1.2.3.2.10.131
103
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
103 total| Object Name |
|---|
prvtCfmMibPrvt extension of Connectivity Fault Management module for managing IEEE 802.1ag MODULE-IDENTITY .1.3.6.1.4.1.6321.1.2.3.2.10.131 |
prvtCfmMibNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.2.10.131.0 |
prvtCfm1wJitterThresholdThis trap should be sent whenever the one way jitter
on a CFM test will surpass one of the 2 defined thresholds. NOTIFICATION-TYPE .1.3.6.1.4.1.6321.1.2.3.2.10.131.0.1 |
prvtCfmJitterThresholdThis trap should be sent whenever the two way jitter
on a CFM test will surpass one of the 2 defined thresholds. NOTIFICATION-TYPE .1.3.6.1.4.1.6321.1.2.3.2.10.131.0.2 |
prvtCfmFrameLossThresholdThis trap should be sent whenever the frame loss
on a CFM test will surpass one of the 2 defined
thresholds. NOTIFICATION-TYPE .1.3.6.1.4.1.6321.1.2.3.2.10.131.0.3 |
prvtCfmLatencyThresholdThis trap should be sent whenever the latency
on a CFM test will surpass one of the 2 defined
thresholds. NOTIFICATION-TYPE .1.3.6.1.4.1.6321.1.2.3.2.10.131.0.4 |
prvtCfmAisReceivedThis trap is issued whenever an AIS condition with specified lifetime on a MEP is met. NOTIFICATION-TYPE .1.3.6.1.4.1.6321.1.2.3.2.10.131.0.5 |
prvtCfmLckReceivedThis trap is issued whenever an LCK condition with specified lifetime on a MEP is met. NOTIFICATION-TYPE .1.3.6.1.4.1.6321.1.2.3.2.10.131.0.6 |
prvtCfmMibObjects OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.2.10.131.1 |
prvtCfmUpdateIntervalTime between monitoring parameters update (in seconds).
A value of 0 suspends the monitoring task and a
value different from 0 resumes it. Default is 20 seconds.rw Unsigned32 .1.3.6.1.4.1.6321.1.2.3.2.10.131.1.1 |
prvtCfmStatusEnable/disable cfm.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.2.10.131.1.2 |
prvtCfmProfile OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.2.10.131.1.3 |
prvtCfmProfileTableNextIndexThis object contains an unused value for prvtCfmProfileIndex in
the prvtCfmProfileTable, or a zero to indicate that none exist.ro Dot1afCfmIndexIntegerNextFree (IEEE8021-CFM-MIB) .1.3.6.1.4.1.6321.1.2.3.2.10.131.1.3.1 |
prvtCfmProfileTableTable contains loopback results from all remote MEPs in the MA. SEQUENCE OF PrvtCfmProfileEntry .1.3.6.1.4.1.6321.1.2.3.2.10.131.1.3.2 |
prvtCfmProfileEntrya PrvtCfmProfileEntry .1.3.6.1.4.1.6321.1.2.3.2.10.131.1.3.2.1 |
prvtCfmProfileIndexTable index. Unsigned32 .1.3.6.1.4.1.6321.1.2.3.2.10.131.1.3.2.1.1 |
prvtCfmProfileNameProfile name.rw DisplayString .1.3.6.1.4.1.6321.1.2.3.2.10.131.1.3.2.1.2 |
prvtCfmProfilePriority802.1p class-of-service setting.rw Unsigned32 .1.3.6.1.4.1.6321.1.2.3.2.10.131.1.3.2.1.3 |
prvtCfmProfileRateNumber of Request packets to send each time.rw Unsigned32 .1.3.6.1.4.1.6321.1.2.3.2.10.131.1.3.2.1.4 |
prvtCfmProfileSizeSize of data TLV included in probe packets (in octets).rw Unsigned32 .1.3.6.1.4.1.6321.1.2.3.2.10.131.1.3.2.1.5 |
prvtCfmProfileBucketSizeNumber of the results to save for results calculation.rw Unsigned32 .1.3.6.1.4.1.6321.1.2.3.2.10.131.1.3.2.1.6 |
prvtCfmProfile1wJitterErrorSpecifies one-way jitter error values to monitor in milliseconds.rw Unsigned32 .1.3.6.1.4.1.6321.1.2.3.2.10.131.1.3.2.1.7 |
prvtCfmProfile1wJitterWarningSpecifies one-way jitter warning values to monitor in milliseconds.rw Unsigned32 .1.3.6.1.4.1.6321.1.2.3.2.10.131.1.3.2.1.8 |
prvtCfmProfileJitterErrorSpecifies round-trip jitter error values to monitor in milliseconds.rw Unsigned32 .1.3.6.1.4.1.6321.1.2.3.2.10.131.1.3.2.1.9 |
prvtCfmProfileJitterErrorPeriodSpecifies the duration jitter occurs in seconds.rw Unsigned32 .1.3.6.1.4.1.6321.1.2.3.2.10.131.1.3.2.1.10 |
prvtCfmProfileJitterWarningSpecifies round-trip jitter warning values
to monitor in milliseconds. If set value is greater than the
jitter-error it means that the warning is disabled.rw Unsigned32 .1.3.6.1.4.1.6321.1.2.3.2.10.131.1.3.2.1.11 |
prvtCfmProfileJitterWarningPeriodSpecifies the duration jitter occurs in seconds.rw Unsigned32 .1.3.6.1.4.1.6321.1.2.3.2.10.131.1.3.2.1.12 |
prvtCfmProfileFrameLossErrorSpecifies round-trip frame-loss error
values to monitor. The default is
frame-loss of 10% is reported.rw Unsigned32 .1.3.6.1.4.1.6321.1.2.3.2.10.131.1.3.2.1.13 |
prvtCfmProfileFrameLossWarningSpecifies round-trip frame-loss warning
values to monitor. The default is frame-loss
of 8% is reported. If set value is greater
than the frame-loss-error it means
that the warning is disable.rw Unsigned32 .1.3.6.1.4.1.6321.1.2.3.2.10.131.1.3.2.1.14 |
prvtCfmProfileLatencyErrorSpecifies round-trip latency error values to monitor in milliseconds.rw Unsigned32 .1.3.6.1.4.1.6321.1.2.3.2.10.131.1.3.2.1.15 |
prvtCfmProfileLatencyErrorPeriodSpecifies the duration latency increase occurs in seconds.rw Unsigned32 .1.3.6.1.4.1.6321.1.2.3.2.10.131.1.3.2.1.16 |
prvtCfmProfileLatencyWarningSpecifies round-trip latency error values to
monitor in milliseconds. If set value is greater than the
latency-error it means that the warning is disabled.rw Unsigned32 .1.3.6.1.4.1.6321.1.2.3.2.10.131.1.3.2.1.17 |
prvtCfmProfileLatencyWarningPeriodSpecifies the duration latency increase occurs in seconds.rw Unsigned32 .1.3.6.1.4.1.6321.1.2.3.2.10.131.1.3.2.1.18 |
prvtCfmProfileRowStatusThe status of the row.
The writable columns in a row can not be changed if the row
is active. All columns must have a valid value before a row
can be activated.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.2.10.131.1.3.2.1.19 |
prvtCfmProfile1wJitterEnableA boolean showing if one way jitter calculation is enabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.2.10.131.1.3.2.1.20 |
prvtCfmProfileJitterEnableA boolean showing if two way jitter calculation is enabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.2.10.131.1.3.2.1.21 |
prvtCfmProfileFrameLossEnableA boolean showing if frame loss calculation is enabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.2.10.131.1.3.2.1.22 |
prvtCfmProfileLatencyEnableA boolean showing if latency calculation is enabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.2.10.131.1.3.2.1.23 |
prvtCfmProcess OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.2.10.131.1.4 |
prvtCfmProcessTableNextIndexThis object contains an unused value for prvtCfmProcessIndex in
the prvtCfmProcessTable, or a zero to indicate that none exists.ro Dot1afCfmIndexIntegerNextFree (IEEE8021-CFM-MIB) .1.3.6.1.4.1.6321.1.2.3.2.10.131.1.4.1 |
prvtCfmProcessTablePrivate extension of dot1agCfmMaNetTable.
Controls the two-way monitoring process
for MEP's in the MA. SEQUENCE OF PrvtCfmProcessEntry .1.3.6.1.4.1.6321.1.2.3.2.10.131.1.4.2 |
prvtCfmProcessEntrya PrvtCfmProcessEntry .1.3.6.1.4.1.6321.1.2.3.2.10.131.1.4.2.1 |
prvtCfmProcessIndexTable index. Unsigned32 .1.3.6.1.4.1.6321.1.2.3.2.10.131.1.4.2.1.1 |
prvtCfmProcessProfileIndexIndex of the monitoring profile to be used.rw Unsigned32 .1.3.6.1.4.1.6321.1.2.3.2.10.131.1.4.2.1.2 |
prvtCfmProcessNameThe name of the process. Should be unique per domain/MArw OCTET STRING .1.3.6.1.4.1.6321.1.2.3.2.10.131.1.4.2.1.3 |
prvtCfmProcessStatusEnable/disable two-way monitoring process for MEP's in the MA.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.2.10.131.1.4.2.1.4 |
prvtCfmProcessRepeatIntervalRepeating frequency of the monitoring process.rw Unsigned32 .1.3.6.1.4.1.6321.1.2.3.2.10.131.1.4.2.1.5 |
prvtCfmProcessPacketTypeUse CFM Loopback or Y.1731 LMMs and DMMs packets.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.2.10.131.1.4.2.1.6 |
prvtCfmProcessUnreturnedPktsNumber of requests for which a reply hasn't been
received. These packets will be counted as lost
when they enter timeout.ro Unsigned32 .1.3.6.1.4.1.6321.1.2.3.2.10.131.1.4.2.1.7 |
prvtCfmProcessRowStatusThe status of the row.
The writable columns in a row can not be changed if the row
is active. All columns must have a valid value before a row
can be activated.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.2.10.131.1.4.2.1.8 |
prvtCfmProcessResult OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.2.10.131.1.5 |
prvtCfmProcessResultTableTable contains process results. SEQUENCE OF PrvtCfmProcessResultEntry .1.3.6.1.4.1.6321.1.2.3.2.10.131.1.5.1 |
prvtCfmProcessResultEntrya PrvtCfmProcessResultEntry .1.3.6.1.4.1.6321.1.2.3.2.10.131.1.5.1.1 |
prvtCfmProcessResultOneWayJitterOne way jitter calculated for a specific remote MEP in millisecondsro Unsigned32 .1.3.6.1.4.1.6321.1.2.3.2.10.131.1.5.1.1.1 |
prvtCfmProcessResultTwoWayJitterTwo way jitter calculated for a specific remote MEP in millisecondsro Unsigned32 .1.3.6.1.4.1.6321.1.2.3.2.10.131.1.5.1.1.2 |
prvtCfmProcessResultLatencyTwo way latency calculated for a specific remote MEP
in millisecondsro Unsigned32 .1.3.6.1.4.1.6321.1.2.3.2.10.131.1.5.1.1.3 |
prvtCfmProcessResultFramelossTwo way frameloss calculated for a specific remote MEP
in units of hundredths of percent.
Note: When prvtCfmProcessResultFrameloss has value of 10000, all the values of
prvtCfmProcessResultOneWayJitter, prvtCfmProcessResultTwoWayJitter and
prvtCfmProcessResultLatency are irrelevant.ro Unsigned32 .1.3.6.1.4.1.6321.1.2.3.2.10.131.1.5.1.1.4 |
prvtCfmMa OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.2.10.131.1.6 |
prvtCfmMaTableTable includes extra variables needed for Y.1731
support and service awareness SEQUENCE OF PrvtCfmMaEntry .1.3.6.1.4.1.6321.1.2.3.2.10.131.1.6.1 |
prvtCfmMaEntrya PrvtCfmMaEntry .1.3.6.1.4.1.6321.1.2.3.2.10.131.1.6.1.1 |
prvtCfmMaCompAisLckEnabledTurn the AIS & LCK features on/off.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.2.10.131.1.6.1.1.1 |
prvtCfmMaCompAisLckLevelThe MD level at which AIS & LCK frames will be sent.
It should be greater then that of the current domain.
The default value is '-1' representing 'not-configured'.rw Dot1agCfmMDLevelOrNone .1.3.6.1.4.1.6321.1.2.3.2.10.131.1.6.1.1.2 |
prvtCfmMaCompAisLckIntervalThe time interval at which AIS and LCK frames will be sentrw Enumeration .1.3.6.1.4.1.6321.1.2.3.2.10.131.1.6.1.1.3 |
prvtCfmMaCompAisLckPriorityCOS parameter for the outgoing AIS & LCK frames.
The default value is '6'rw Unsigned32 .1.3.6.1.4.1.6321.1.2.3.2.10.131.1.6.1.1.4 |
prvtCfmMaCompServiceIdThe primary service ID attached to this MArw Unsigned32 .1.3.6.1.4.1.6321.1.2.3.2.10.131.1.6.1.1.5 |
prvtCfmMaCompNumberOfServicesThe number of services attached to this MAro Unsigned32 .1.3.6.1.4.1.6321.1.2.3.2.10.131.1.6.1.1.6 |
prvtCfmMaCompClearConnectivityNumber of MEP or 0 for allrw Unsigned32 .1.3.6.1.4.1.6321.1.2.3.2.10.131.1.6.1.1.7 |
prvtCfmMep OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.2.10.131.1.7 |
prvtCfmMepTablea SEQUENCE OF PrvtCfmMepEntry .1.3.6.1.4.1.6321.1.2.3.2.10.131.1.7.1 |
prvtCfmMepEntrya PrvtCfmMepEntry .1.3.6.1.4.1.6321.1.2.3.2.10.131.1.7.1.1 |
prvtCfmMepAlarmSupressedA boolean showing if an AIS or LCK packet
was received from a lower levelro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.2.10.131.1.7.1.1.1 |
prvtCfmMepAisConditionA boolean showing if there is AIS condition. The value of the object is true (an AIS condition), when
there is a detection of signal-fail condition at a Server layer or reception of AIS at a server (sub-) layer MEP [AIS condition/Rec.
ITU-T Y.1731].
The AIS condition will exit when following criteria is met: During an interval equal to 3.5 times the AIS transmission
period indicated in the AIS frames received earlier, the MEP does not receive AIS frames or, when ETH-CC is used,
upon clearing of LOC defect at MEP /Appendix I/Rec. ITU-T Y.1731.
If prvtCfmMaCompAisLckLevel is configured the MEP should send AIS packets.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.2.10.131.1.7.1.1.2 |
prvtCfmMepLckConditionA boolean showing if the MEP should lock the service
towards the client and send LCK packetsro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.2.10.131.1.7.1.1.3 |
prvtCfmMepAisLifetimeThe lifetime of the last received AIS packet.
During an interval equal to 3.5 times the AIS transmission period indicated
in the AIS frames received earlier, the MEP does not receive AIS frames.
The value is valid (non-zero) if AIS packets are being received.ro Enumeration .1.3.6.1.4.1.6321.1.2.3.2.10.131.1.7.1.1.4 |
prvtCfmMepLckLifetimeThe lifetime of the last received LCK packet.
During an interval equal to 3.5 times the LCK transmission period indicated
in the LCK frames received earlier, the MEP does not receive LCK frames.
The value is valid (non-zero) if AIS packets are being received.ro Enumeration .1.3.6.1.4.1.6321.1.2.3.2.10.131.1.7.1.1.5 |
prvtCfmMepTransmitMcastLbmA boolean to control sending Y.1731 multicast loopback.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.2.10.131.1.7.1.1.6 |
prvtCfmMepTransmitLbmInfiniteA boolean to control sending LBMs continuously until the
operation is explicitly stopped by setting this back to falserw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.2.10.131.1.7.1.1.7 |
prvtCfmMepTransmitLbmDelayAn amount of time to wait between sent LBMs (in seconds).rw Unsigned32 .1.3.6.1.4.1.6321.1.2.3.2.10.131.1.7.1.1.8 |
prvtCfmMepTransmitLbmTimeoutAn amount of time to wait after the last sent LBM if no
LBR is received (in seconds).rw Unsigned32 .1.3.6.1.4.1.6321.1.2.3.2.10.131.1.7.1.1.9 |
prvtCfmMepTransmitLtmTimeoutAn amount of time to wait after the last sent LTM if no
LTR is received (in seconds).rw Unsigned32 .1.3.6.1.4.1.6321.1.2.3.2.10.131.1.7.1.1.10 |
prvtCfmMepTransmitLbmSentPktsNumber of successfully sent packets in the current LBM
session.ro Unsigned32 .1.3.6.1.4.1.6321.1.2.3.2.10.131.1.7.1.1.11 |
prvtCfmMepTransmitLbmSuccessRateSuccess rate of the current LBM session (in percentage*100).ro Unsigned32 .1.3.6.1.4.1.6321.1.2.3.2.10.131.1.7.1.1.12 |
prvtCfmMepTransmitLbmMinTimeMinimum LBR response time (in msec).ro Unsigned32 .1.3.6.1.4.1.6321.1.2.3.2.10.131.1.7.1.1.13 |
prvtCfmMepTransmitLbmAvgTimeAverage LBR response time (in msec).ro Unsigned32 .1.3.6.1.4.1.6321.1.2.3.2.10.131.1.7.1.1.14 |
prvtCfmMepTransmitLbmMaxTimeMaximum LBR response time (in msec).ro Unsigned32 .1.3.6.1.4.1.6321.1.2.3.2.10.131.1.7.1.1.15 |
prvtCfmMepSuportedRemoteMepsNoThe number of suported remote meps (for TMarc3x0 and TMarc280 devices)rw Enumeration .1.3.6.1.4.1.6321.1.2.3.2.10.131.1.7.1.1.16 |
prvtCfmMepExcludeCCMTLVBitmask that specifies what TLVs should be excluded(for TMarc3x0 and TMarc280 devices):
On set opertaion:
BIT4 = MSB Include/Exclude bit - if it is 1 the tlv is excluded from the specific CCM packet, if it is 0 the tlv will be included in the specific CCM packet
BIT3 = If set 1 the OrgSpecific TLV will be excluded or included
BIT2 = If set 1 the InterfaceStatus TLV will be excluded or included
BIT1 = If set 1 the PortStatus TLV will be excluded or included
BIT0 = LSB If set 1 the Sender ID TLV will be excluded or included
Examples:
If Interface Status and Port Status will be excluded the bitmask will look like this:
16 in hexadecimal BIT4 BIT3 BIT2 BIT1 BIT0
1 0 1 1 0
If Interface Status and Port Status will be included the bitmask will look like this:
06 in hexadecimal BIT4 BIT3 BIT2 BIT1 BIT0
0 0 1 1 0
On get operation it shows the bits corresponding to the excluded tlvs
If Interface Status and Port Status are excluded:
06 in hexadecimal - 0 1 1 0rw DisplayString .1.3.6.1.4.1.6321.1.2.3.2.10.131.1.7.1.1.17 |
prvtCfmLbrTableTable contains loopback results following the last loopback operation. SEQUENCE OF PrvtCfmLbrEntry .1.3.6.1.4.1.6321.1.2.3.2.10.131.1.7.2 |
prvtCfmLbrEntrya PrvtCfmLbrEntry .1.3.6.1.4.1.6321.1.2.3.2.10.131.1.7.2.1 |
prvtCfmLbrSeqNumberTransaction identifier/Sequence number of the received LBR. Unsigned32 .1.3.6.1.4.1.6321.1.2.3.2.10.131.1.7.2.1.1 |
prvtCfmLbrReceiveOrderAn index to distinguish among multiple LBRs with the same LBR
Transaction Identifier field value. This situation can appear
in the case of multicast loopback. Unsigned32 .1.3.6.1.4.1.6321.1.2.3.2.10.131.1.7.2.1.2 |
prvtCfmLbrTimeRemote MEPs response time in milliseconds.ro Unsigned32 .1.3.6.1.4.1.6321.1.2.3.2.10.131.1.7.2.1.3 |
prvtCfmLbrMacAddressRemote MEPs mac address. For unicast loopback
this is the same as dot1agCfmMepTransmitLbmDestMacAddress,
but for multicast loopback there will be different entries.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.2.10.131.1.7.2.1.4 |
prvtCfmLbrBadMsduResult of the Data TLV verification.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.2.10.131.1.7.2.1.5 |
prvtCfmLtrTableThis table adds the possibility to measure the response
time to a linktrace request. SEQUENCE OF PrvtCfmLtrEntry .1.3.6.1.4.1.6321.1.2.3.2.10.131.1.7.3 |
prvtCfmLtrEntrya PrvtCfmLtrEntry .1.3.6.1.4.1.6321.1.2.3.2.10.131.1.7.3.1 |
prvtCfmLtrTimeRemote MPs response time in milliseconds.ro Unsigned32 .1.3.6.1.4.1.6321.1.2.3.2.10.131.1.7.3.1.1 |
prvtCfmMaAisLckVlan OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.2.10.131.1.8 |
prvtCfmMaAisLckVlanTableTable includes extra variables needed for AIS/LCK configurable vlans SEQUENCE OF PrvtCfmMaAisLckVlanEntry .1.3.6.1.4.1.6321.1.2.3.2.10.131.1.8.1 |
prvtCfmMaAisLckVlanEntryTable includes extra variables needed for AIS/LCK configurable vlans PrvtCfmMaAisLckVlanEntry .1.3.6.1.4.1.6321.1.2.3.2.10.131.1.8.1.1 |
prvtCfmMaAisLckVlanIdVlan ID (towards customer level) that the generated AIS/LCK packets should use.rw VlanId (Q-BRIDGE-MIB) .1.3.6.1.4.1.6321.1.2.3.2.10.131.1.8.1.1.1 |
prvtCfmMaAisLckVlanRowStatusThe status of the row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.2.10.131.1.8.1.1.2 |
prvtCfmMibConformance OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.2.10.131.2 |