Q-BRIDGE-MIB
AI MIB Summary
The Q-BRIDGE-MIB provides standardized SNMP access to monitor and configure VLAN bridge forwarding tables, MAC address aging parameters, and IEEE 802.1Q-tagged port states on Layer 2 switching infrastructure. It enables the retrieval of specific metrics including port VLAN membership, restricted VLAN registration status, and packet/byte counters for classified traffic flows defined by IEEE 802.1v.
The VLAN Bridge MIB module for managing Virtual Bridged Local Area Networks, as defined by IEEE 802.1Q-2003, including Restricted Vlan Registration defined by IEEE 802.1u-2001 and Vlan Classification defined by IEEE 802.1v-2001.
Copyright (C) The Internet Society (2006). This version of this MIB module is part of RFC 4363; See the RFC itself for full legal notices.
Main OID:
qBridgeMIB.1.3.6.1.2.1.17.7
111
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
111 total| Object Name |
|---|
qBridgeMIBThe VLAN Bridge MIB module for managing Virtual Bridged
Local Area Networks, as defined by IEEE 802.1Q-2003,
including Restricted Vlan Registration defined by
IEEE 802.1u-2001 and Vlan Classification defined by
IEEE 802.1v-2001.
Copyright (C) The Internet Society (2006). This version of
this MIB module is part of RFC 4363; See the RFC itself for
full legal notices. MODULE-IDENTITY .1.3.6.1.2.1.17.7 |
qBridgeMIBObjects OBJECT IDENTIFIER .1.3.6.1.2.1.17.7.1 |
dot1qBase OBJECT IDENTIFIER .1.3.6.1.2.1.17.7.1.1 |
dot1qVlanVersionNumberThe version number of IEEE 802.1Q that this device
supports.ro Enumeration .1.3.6.1.2.1.17.7.1.1.1 |
dot1qMaxVlanIdThe maximum IEEE 802.1Q VLAN-ID that this device
supports.ro VlanId .1.3.6.1.2.1.17.7.1.1.2 |
dot1qMaxSupportedVlansThe maximum number of IEEE 802.1Q VLANs that this
device supports.ro Unsigned32 .1.3.6.1.2.1.17.7.1.1.3 |
dot1qNumVlansThe current number of IEEE 802.1Q VLANs that are
configured in this device.ro Unsigned32 .1.3.6.1.2.1.17.7.1.1.4 |
dot1qGvrpStatusThe administrative status requested by management for
GVRP. The value enabled(1) indicates that GVRP should
be enabled on this device, on all ports for which it has
not been specifically disabled. When disabled(2), GVRP
is disabled on all ports, and all GVRP packets will be
forwarded transparently. This object affects all GVRP
Applicant and Registrar state machines. A transition
from disabled(2) to enabled(1) will cause a reset of all
GVRP state machines on all ports.
The value of this object MUST be retained across
reinitializations of the management system.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.2.1.17.7.1.1.5 |
dot1qTp OBJECT IDENTIFIER .1.3.6.1.2.1.17.7.1.2 |
dot1qFdbTableA table that contains configuration and control
information for each Filtering Database currently
operating on this device. Entries in this table appear
automatically when VLANs are assigned FDB IDs in the
dot1qVlanCurrentTable. SEQUENCE OF Dot1qFdbEntry .1.3.6.1.2.1.17.7.1.2.1 |
dot1qFdbEntryInformation about a specific Filtering Database. Dot1qFdbEntry .1.3.6.1.2.1.17.7.1.2.1.1 |
dot1qFdbIdThe identity of this Filtering Database. Unsigned32 .1.3.6.1.2.1.17.7.1.2.1.1.1 |
dot1qFdbDynamicCountThe current number of dynamic entries in this
Filtering Database.ro Counter32 .1.3.6.1.2.1.17.7.1.2.1.1.2 |
dot1qTpFdbTableA table that contains information about unicast entries
for which the device has forwarding and/or filtering
information. This information is used by the
transparent bridging function in determining how to
propagate a received frame. SEQUENCE OF Dot1qTpFdbEntry .1.3.6.1.2.1.17.7.1.2.2 |
dot1qTpFdbEntryInformation about a specific unicast MAC address for
which the device has some forwarding and/or filtering
information. Dot1qTpFdbEntry .1.3.6.1.2.1.17.7.1.2.2.1 |
dot1qTpFdbAddressA unicast MAC address for which the device has
forwarding and/or filtering information. MacAddress (SNMPv2-TC) .1.3.6.1.2.1.17.7.1.2.2.1.1 |
dot1qTpFdbPortEither the value '0', or the port number of the port on
which a frame having a source address equal to the value
of the corresponding instance of dot1qTpFdbAddress has
been seen. A value of '0' indicates that the port
number has not been learned but that the device does
have some forwarding/filtering information about this
address (e.g., in the dot1qStaticUnicastTable).
Implementors are encouraged to assign the port value to
this object whenever it is learned, even for addresses
for which the corresponding value of dot1qTpFdbStatus is
not learned(3).ro Integer32 .1.3.6.1.2.1.17.7.1.2.2.1.2 |
dot1qTpFdbStatusThe status of this entry. The meanings of the values
are:
other(1) - none of the following. This may include
the case where some other MIB object (not the
corresponding instance of dot1qTpFdbPort, nor an
entry in the dot1qStaticUnicastTable) is being
used to determine if and how frames addressed to
the value of the corresponding instance of
dot1qTpFdbAddress are being forwarded.
invalid(2) - this entry is no longer valid (e.g., it
was learned but has since aged out), but has not
yet been flushed from the table.
learned(3) - the value of the corresponding instance
of dot1qTpFdbPort was learned and is being used.
self(4) - the value of the corresponding instance of
dot1qTpFdbAddress represents one of the device's
addresses. The corresponding instance of
dot1qTpFdbPort indicates which of the device's
ports has this address.
mgmt(5) - the value of the corresponding instance of
dot1qTpFdbAddress is also the value of an
existing instance of dot1qStaticAddress.ro Enumeration .1.3.6.1.2.1.17.7.1.2.2.1.3 |
dot1qTpGroupTableA table containing filtering information for VLANs
configured into the bridge by (local or network)
management, or learned dynamically, specifying the set of
ports to which frames received on a VLAN for this FDB
and containing a specific Group destination address are
allowed to be forwarded. SEQUENCE OF Dot1qTpGroupEntry .1.3.6.1.2.1.17.7.1.2.3 |
dot1qTpGroupEntryFiltering information configured into the bridge by
management, or learned dynamically, specifying the set of
ports to which frames received on a VLAN and containing
a specific Group destination address are allowed to be
forwarded. The subset of these ports learned dynamically
is also provided. Dot1qTpGroupEntry .1.3.6.1.2.1.17.7.1.2.3.1 |
dot1qTpGroupAddressThe destination Group MAC address in a frame to which
this entry's filtering information applies. MacAddress (SNMPv2-TC) .1.3.6.1.2.1.17.7.1.2.3.1.1 |
dot1qTpGroupEgressPortsThe complete set of ports, in this VLAN, to which
frames destined for this Group MAC address are currently
being explicitly forwarded. This does not include ports
for which this address is only implicitly forwarded, in
the dot1qForwardAllPorts list.ro PortList .1.3.6.1.2.1.17.7.1.2.3.1.2 |
dot1qTpGroupLearntThe subset of ports in dot1qTpGroupEgressPorts that
were learned by GMRP or some other dynamic mechanism, in
this Filtering database.ro PortList .1.3.6.1.2.1.17.7.1.2.3.1.3 |
dot1qForwardAllTableA table containing forwarding information for each
VLAN, specifying the set of ports to which forwarding of
all multicasts applies, configured statically by
management or dynamically by GMRP. An entry appears in
this table for all VLANs that are currently
instantiated. SEQUENCE OF Dot1qForwardAllEntry .1.3.6.1.2.1.17.7.1.2.4 |
dot1qForwardAllEntryForwarding information for a VLAN, specifying the set
of ports to which all multicasts should be forwarded,
configured statically by management or dynamically by
GMRP. Dot1qForwardAllEntry .1.3.6.1.2.1.17.7.1.2.4.1 |
dot1qForwardAllPortsThe complete set of ports in this VLAN to which all
multicast group-addressed frames are to be forwarded.
This includes ports for which this need has been
determined dynamically by GMRP, or configured statically
by management.ro PortList .1.3.6.1.2.1.17.7.1.2.4.1.1 |
dot1qForwardAllStaticPortsThe set of ports configured by management in this VLAN
to which all multicast group-addressed frames are to be
forwarded. Ports entered in this list will also appear
in the complete set shown by dot1qForwardAllPorts. This
value will be restored after the device is reset. This
only applies to ports that are members of the VLAN,
defined by dot1qVlanCurrentEgressPorts. A port may not
be added in this set if it is already a member of the
set of ports in dot1qForwardAllForbiddenPorts. The
default value is a string of ones of appropriate length,
to indicate the standard behaviour of using basic
filtering services, i.e., forward all multicasts to all
ports.
The value of this object MUST be retained across
reinitializations of the management system.rw PortList .1.3.6.1.2.1.17.7.1.2.4.1.2 |
dot1qForwardAllForbiddenPortsThe set of ports configured by management in this VLAN
for which the Service Requirement attribute Forward All
Multicast Groups may not be dynamically registered by
GMRP. This value will be restored after the device is
reset. A port may not be added in this set if it is
already a member of the set of ports in
dot1qForwardAllStaticPorts. The default value is a
string of zeros of appropriate length.
The value of this object MUST be retained across
reinitializations of the management system.rw PortList .1.3.6.1.2.1.17.7.1.2.4.1.3 |
dot1qForwardUnregisteredTableA table containing forwarding information for each
VLAN, specifying the set of ports to which forwarding of
multicast group-addressed frames for which no
more specific forwarding information applies. This is
configured statically by management and determined
dynamically by GMRP. An entry appears in this table for
all VLANs that are currently instantiated. SEQUENCE OF Dot1qForwardUnregisteredEntry .1.3.6.1.2.1.17.7.1.2.5 |
dot1qForwardUnregisteredEntryForwarding information for a VLAN, specifying the set
of ports to which all multicasts for which there is no
more specific forwarding information shall be forwarded.
This is configured statically by management or
dynamically by GMRP. Dot1qForwardUnregisteredEntry .1.3.6.1.2.1.17.7.1.2.5.1 |
dot1qForwardUnregisteredPortsThe complete set of ports in this VLAN to which
multicast group-addressed frames for which there is no
more specific forwarding information will be forwarded.
This includes ports for which this need has been
determined dynamically by GMRP, or configured statically
by management.ro PortList .1.3.6.1.2.1.17.7.1.2.5.1.1 |
dot1qForwardUnregisteredStaticPortsThe set of ports configured by management, in this
VLAN, to which multicast group-addressed frames for
which there is no more specific forwarding information
are to be forwarded. Ports entered in this list will
also appear in the complete set shown by
dot1qForwardUnregisteredPorts. This value will be
restored after the device is reset. A port may not be
added in this set if it is already a member of the set
of ports in dot1qForwardUnregisteredForbiddenPorts. The
default value is a string of zeros of appropriate
length, although this has no effect with the default
value of dot1qForwardAllStaticPorts.
The value of this object MUST be retained across
reinitializations of the management system.rw PortList .1.3.6.1.2.1.17.7.1.2.5.1.2 |
dot1qForwardUnregisteredForbiddenPortsThe set of ports configured by management in this VLAN
for which the Service Requirement attribute Forward
Unregistered Multicast Groups may not be dynamically
registered by GMRP. This value will be restored after
the device is reset. A port may not be added in this
set if it is already a member of the set of ports in
dot1qForwardUnregisteredStaticPorts. The default value
is a string of zeros of appropriate length.
The value of this object MUST be retained across
reinitializations of the management system.rw PortList .1.3.6.1.2.1.17.7.1.2.5.1.3 |
dot1qStatic OBJECT IDENTIFIER .1.3.6.1.2.1.17.7.1.3 |
dot1qStaticUnicastTableA table containing filtering information for Unicast
MAC addresses for each Filtering Database, configured
into the device by (local or network) management
specifying the set of ports to which frames received
from specific ports and containing specific unicast
destination addresses are allowed to be forwarded. A
value of zero in this table (as the port number from
which frames with a specific destination address are
received) is used to specify all ports for which there
is no specific entry in this table for that particular
destination address. Entries are valid for unicast
addresses only. SEQUENCE OF Dot1qStaticUnicastEntry .1.3.6.1.2.1.17.7.1.3.1 |
dot1qStaticUnicastEntryFiltering information configured into the device by
(local or network) management specifying the set of
ports to which frames received from a specific port and
containing a specific unicast destination address are
allowed to be forwarded. Dot1qStaticUnicastEntry .1.3.6.1.2.1.17.7.1.3.1.1 |
dot1qStaticUnicastAddressThe destination MAC address in a frame to which this
entry's filtering information applies. This object must
take the value of a unicast address. MacAddress (SNMPv2-TC) .1.3.6.1.2.1.17.7.1.3.1.1.1 |
dot1qStaticUnicastReceivePortEither the value '0' or the port number of the port
from which a frame must be received in order for this
entry's filtering information to apply. A value of zero
indicates that this entry applies on all ports of the
device for which there is no other applicable entry. Integer32 .1.3.6.1.2.1.17.7.1.3.1.1.2 |
dot1qStaticUnicastAllowedToGoToThe set of ports for which a frame with a specific
unicast address will be flooded in the event that it
has not been learned. It also specifies the set of
ports on which a specific unicast address may be dynamically
learned. The dot1qTpFdbTable will have an equivalent
entry with a dot1qTpFdbPort value of '0' until this
address has been learned, at which point it will be updated
with the port the address has been seen on. This only
applies to ports that are members of the VLAN, defined
by dot1qVlanCurrentEgressPorts. The default value of
this object is a string of ones of appropriate length.
The value of this object MUST be retained across
reinitializations of the management system.rw PortList .1.3.6.1.2.1.17.7.1.3.1.1.3 |
dot1qStaticUnicastStatusThis object indicates the status of this entry.
other(1) - this entry is currently in use, but
the conditions under which it will remain
so differ from the following values.
invalid(2) - writing this value to the object
removes the corresponding entry.
permanent(3) - this entry is currently in use
and will remain so after the next reset of
the bridge.
deleteOnReset(4) - this entry is currently in
use and will remain so until the next
reset of the bridge.
deleteOnTimeout(5) - this entry is currently in
use and will remain so until it is aged out.
The value of this object MUST be retained across
reinitializations of the management system.rw Enumeration .1.3.6.1.2.1.17.7.1.3.1.1.4 |
dot1qStaticMulticastTableA table containing filtering information for Multicast
and Broadcast MAC addresses for each VLAN, configured
into the device by (local or network) management
specifying the set of ports to which frames received
from specific ports and containing specific Multicast
and Broadcast destination addresses are allowed to be
forwarded. A value of zero in this table (as the port
number from which frames with a specific destination
address are received) is used to specify all ports for
which there is no specific entry in this table for that
particular destination address. Entries are valid for
Multicast and Broadcast addresses only. SEQUENCE OF Dot1qStaticMulticastEntry .1.3.6.1.2.1.17.7.1.3.2 |
dot1qStaticMulticastEntryFiltering information configured into the device by
(local or network) management specifying the set of
ports to which frames received from this specific port
for this VLAN and containing this Multicast or Broadcast
destination address are allowed to be forwarded. Dot1qStaticMulticastEntry .1.3.6.1.2.1.17.7.1.3.2.1 |
dot1qStaticMulticastAddressThe destination MAC address in a frame to which this
entry's filtering information applies. This object must
take the value of a Multicast or Broadcast address. MacAddress (SNMPv2-TC) .1.3.6.1.2.1.17.7.1.3.2.1.1 |
dot1qStaticMulticastReceivePortEither the value '0' or the port number of the port
from which a frame must be received in order for this
entry's filtering information to apply. A value of zero
indicates that this entry applies on all ports of the
device for which there is no other applicable entry. Integer32 .1.3.6.1.2.1.17.7.1.3.2.1.2 |
dot1qStaticMulticastStaticEgressPortsThe set of ports to which frames received from a
specific port and destined for a specific Multicast or
Broadcast MAC address must be forwarded, regardless of
any dynamic information, e.g., from GMRP. A port may not
be added in this set if it is already a member of the
set of ports in dot1qStaticMulticastForbiddenEgressPorts.
The default value of this object is a string of ones of
appropriate length.
The value of this object MUST be retained across
reinitializations of the management system.rw PortList .1.3.6.1.2.1.17.7.1.3.2.1.3 |
dot1qStaticMulticastForbiddenEgressPortsThe set of ports to which frames received from a
specific port and destined for a specific Multicast or
Broadcast MAC address must not be forwarded, regardless
of any dynamic information, e.g., from GMRP. A port may
not be added in this set if it is already a member of the
set of ports in dot1qStaticMulticastStaticEgressPorts.
The default value of this object is a string of zeros of
appropriate length.
The value of this object MUST be retained across
reinitializations of the management system.rw PortList .1.3.6.1.2.1.17.7.1.3.2.1.4 |
dot1qStaticMulticastStatusThis object indicates the status of this entry.
other(1) - this entry is currently in use, but
the conditions under which it will remain
so differ from the following values.
invalid(2) - writing this value to the object
removes the corresponding entry.
permanent(3) - this entry is currently in use
and will remain so after the next reset of
the bridge.
deleteOnReset(4) - this entry is currently in
use and will remain so until the next
reset of the bridge.
deleteOnTimeout(5) - this entry is currently in
use and will remain so until it is aged out.
The value of this object MUST be retained across
reinitializations of the management system.rw Enumeration .1.3.6.1.2.1.17.7.1.3.2.1.5 |
dot1qVlan OBJECT IDENTIFIER .1.3.6.1.2.1.17.7.1.4 |
dot1qVlanNumDeletesThe number of times a VLAN entry has been deleted from
the dot1qVlanCurrentTable (for any reason). If an entry
is deleted, then inserted, and then deleted, this
counter will be incremented by 2.ro Counter32 .1.3.6.1.2.1.17.7.1.4.1 |
dot1qVlanCurrentTableA table containing current configuration information
for each VLAN currently configured into the device by
(local or network) management, or dynamically created
as a result of GVRP requests received. SEQUENCE OF Dot1qVlanCurrentEntry .1.3.6.1.2.1.17.7.1.4.2 |
dot1qVlanCurrentEntryInformation for a VLAN configured into the device by
(local or network) management, or dynamically created
as a result of GVRP requests received. Dot1qVlanCurrentEntry .1.3.6.1.2.1.17.7.1.4.2.1 |
dot1qVlanTimeMarkA TimeFilter for this entry. See the TimeFilter
textual convention to see how this works. TimeFilter (RMON2-MIB) .1.3.6.1.2.1.17.7.1.4.2.1.1 |
dot1qVlanIndexThe VLAN-ID or other identifier referring to this VLAN. VlanIndex .1.3.6.1.2.1.17.7.1.4.2.1.2 |
dot1qVlanFdbIdThe Filtering Database used by this VLAN. This is one
of the dot1qFdbId values in the dot1qFdbTable. This
value is allocated automatically by the device whenever
the VLAN is created: either dynamically by GVRP, or by
management, in dot1qVlanStaticTable. Allocation of this
value follows the learning constraints defined for this
VLAN in dot1qLearningConstraintsTable.ro Unsigned32 .1.3.6.1.2.1.17.7.1.4.2.1.3 |
dot1qVlanCurrentEgressPortsThe set of ports that are transmitting traffic for
this VLAN as either tagged or untagged frames.ro PortList .1.3.6.1.2.1.17.7.1.4.2.1.4 |
dot1qVlanCurrentUntaggedPortsThe set of ports that are transmitting traffic for
this VLAN as untagged frames.ro PortList .1.3.6.1.2.1.17.7.1.4.2.1.5 |
dot1qVlanStatusThis object indicates the status of this entry.
other(1) - this entry is currently in use, but the
conditions under which it will remain so differ
from the following values.
permanent(2) - this entry, corresponding to an entry
in dot1qVlanStaticTable, is currently in use and
will remain so after the next reset of the
device. The port lists for this entry include
ports from the equivalent dot1qVlanStaticTable
entry and ports learned dynamically.
dynamicGvrp(3) - this entry is currently in use
and will remain so until removed by GVRP. There
is no static entry for this VLAN, and it will be
removed when the last port leaves the VLAN.ro Enumeration .1.3.6.1.2.1.17.7.1.4.2.1.6 |
dot1qVlanCreationTimeThe value of sysUpTime when this VLAN was created.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.2.1.17.7.1.4.2.1.7 |
dot1qVlanStaticTableA table containing static configuration information for
each VLAN configured into the device by (local or
network) management. All entries are permanent and will
be restored after the device is reset. SEQUENCE OF Dot1qVlanStaticEntry .1.3.6.1.2.1.17.7.1.4.3 |
dot1qVlanStaticEntryStatic information for a VLAN configured into the
device by (local or network) management. Dot1qVlanStaticEntry .1.3.6.1.2.1.17.7.1.4.3.1 |
dot1qVlanStaticNameAn administratively assigned string, which may be used
to identify the VLAN.rw SnmpAdminString .1.3.6.1.2.1.17.7.1.4.3.1.1 |
dot1qVlanStaticEgressPortsThe set of ports that are permanently assigned to the
egress list for this VLAN by management. Changes to a
bit in this object affect the per-port, per-VLAN
Registrar control for Registration Fixed for the
relevant GVRP state machine on each port. A port may
not be added in this set if it is already a member of
the set of ports in dot1qVlanForbiddenEgressPorts. The
default value of this object is a string of zeros of
appropriate length, indicating not fixed.rw PortList .1.3.6.1.2.1.17.7.1.4.3.1.2 |
dot1qVlanForbiddenEgressPortsThe set of ports that are prohibited by management
from being included in the egress list for this VLAN.
Changes to this object that cause a port to be included
or excluded affect the per-port, per-VLAN Registrar
control for Registration Forbidden for the relevant GVRP
state machine on each port. A port may not be added in
this set if it is already a member of the set of ports
in dot1qVlanStaticEgressPorts. The default value of
this object is a string of zeros of appropriate length,
excluding all ports from the forbidden set.rw PortList .1.3.6.1.2.1.17.7.1.4.3.1.3 |
dot1qVlanStaticUntaggedPortsThe set of ports that should transmit egress packets
for this VLAN as untagged. The default value of this
object for the default VLAN (dot1qVlanIndex = 1) is a string
of appropriate length including all ports. There is no
specified default for other VLANs. If a device agent cannot
support the set of ports being set, then it will reject the
set operation with an error. For example, a
manager might attempt to set more than one VLAN to be untagged
on egress where the device does not support this IEEE 802.1Q
option.rw PortList .1.3.6.1.2.1.17.7.1.4.3.1.4 |
dot1qVlanStaticRowStatusThis object indicates the status of this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.2.1.17.7.1.4.3.1.5 |
dot1qNextFreeLocalVlanIndexThe next available value for dot1qVlanIndex of a local
VLAN entry in dot1qVlanStaticTable. This will report
values >=4096 if a new Local VLAN may be created or else
the value 0 if this is not possible.
A row creation operation in this table for an entry with a local
VlanIndex value may fail if the current value of this object
is not used as the index. Even if the value read is used,
there is no guarantee that it will still be the valid index
when the create operation is attempted; another manager may
have already got in during the intervening time interval.
In this case, dot1qNextFreeLocalVlanIndex should be re-read
and the creation re-tried with the new value.
This value will automatically change when the current value is
used to create a new row.ro Integer32 (0|4096..2147483647) .1.3.6.1.2.1.17.7.1.4.4 |
dot1qPortVlanTableA table containing per-port control and status
information for VLAN configuration in the device. SEQUENCE OF Dot1qPortVlanEntry .1.3.6.1.2.1.17.7.1.4.5 |
dot1qPortVlanEntryInformation controlling VLAN configuration for a port
on the device. This is indexed by dot1dBasePort. Dot1qPortVlanEntry .1.3.6.1.2.1.17.7.1.4.5.1 |
dot1qPvidThe PVID, the VLAN-ID assigned to untagged frames or
Priority-Tagged frames received on this port.
The value of this object MUST be retained across
reinitializations of the management system.rw VlanIndex .1.3.6.1.2.1.17.7.1.4.5.1.1 |
dot1qPortAcceptableFrameTypesWhen this is admitOnlyVlanTagged(2), the device will
discard untagged frames or Priority-Tagged frames
received on this port. When admitAll(1), untagged
frames or Priority-Tagged frames received on this port
will be accepted and assigned to a VID based on the
PVID and VID Set for this port.
This control does not affect VLAN-independent Bridge
Protocol Data Unit (BPDU) frames, such as GVRP and
Spanning Tree Protocol (STP). It does affect VLAN-
dependent BPDU frames, such as GMRP.
The value of this object MUST be retained across
reinitializations of the management system.rw Enumeration .1.3.6.1.2.1.17.7.1.4.5.1.2 |
dot1qPortIngressFilteringWhen this is true(1), the device will discard incoming
frames for VLANs that do not include this Port in its
Member set. When false(2), the port will accept all
incoming frames.
This control does not affect VLAN-independent BPDU
frames, such as GVRP and STP. It does affect VLAN-
dependent BPDU frames, such as GMRP.
The value of this object MUST be retained across
reinitializations of the management system.rw TruthValue (SNMPv2-TC) .1.3.6.1.2.1.17.7.1.4.5.1.3 |
dot1qPortGvrpStatusThe state of GVRP operation on this port. The value
enabled(1) indicates that GVRP is enabled on this port,
as long as dot1qGvrpStatus is also enabled for this
device. When disabled(2) but dot1qGvrpStatus is still
enabled for the device, GVRP is disabled on this port:
any GVRP packets received will be silently discarded, and
no GVRP registrations will be propagated from other
ports. This object affects all GVRP Applicant and
Registrar state machines on this port. A transition
from disabled(2) to enabled(1) will cause a reset of all
GVRP state machines on this port.
The value of this object MUST be retained across
reinitializations of the management system.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.2.1.17.7.1.4.5.1.4 |
dot1qPortGvrpFailedRegistrationsThe total number of failed GVRP registrations, for any
reason, on this port.ro Counter32 .1.3.6.1.2.1.17.7.1.4.5.1.5 |
dot1qPortGvrpLastPduOriginThe Source MAC Address of the last GVRP message
received on this port.ro MacAddress (SNMPv2-TC) .1.3.6.1.2.1.17.7.1.4.5.1.6 |
dot1qPortRestrictedVlanRegistrationThe state of Restricted VLAN Registration on this port.
If the value of this control is true(1), then creation
of a new dynamic VLAN entry is permitted only if there
is a Static VLAN Registration Entry for the VLAN concerned,
in which the Registrar Administrative Control value for
this port is Normal Registration.
The value of this object MUST be retained across
reinitializations of the management system.rw TruthValue (SNMPv2-TC) .1.3.6.1.2.1.17.7.1.4.5.1.7 |
dot1qPortVlanStatisticsTableA table containing per-port, per-VLAN statistics for
traffic received. Separate objects are provided for both the
most-significant and least-significant bits of statistics
counters for ports that are associated with this transparent
bridge. The most-significant bit objects are only required on
high-capacity interfaces, as defined in the conformance clauses
for these objects. This mechanism is provided as a way to read
64-bit counters for agents that support only SNMPv1.
Note that the reporting of most-significant and least-
significant counter bits separately runs the risk of missing
an overflow of the lower bits in the interval between sampling.
The manager must be aware of this possibility, even within the
same varbindlist, when interpreting the results of a request or
asynchronous notification. SEQUENCE OF Dot1qPortVlanStatisticsEntry .1.3.6.1.2.1.17.7.1.4.6 |
dot1qPortVlanStatisticsEntryTraffic statistics for a VLAN on an interface. Dot1qPortVlanStatisticsEntry .1.3.6.1.2.1.17.7.1.4.6.1 |
dot1qTpVlanPortInFramesThe number of valid frames received by this port from
its segment that were classified as belonging to this
VLAN. Note that a frame received on this port is
counted by this object if and only if it is for a
protocol being processed by the local forwarding process
for this VLAN. This object includes received bridge
management frames classified as belonging to this VLAN
(e.g., GMRP, but not GVRP or STP.ro Counter32 .1.3.6.1.2.1.17.7.1.4.6.1.1 |
dot1qTpVlanPortOutFramesThe number of valid frames transmitted by this port to
its segment from the local forwarding process for this
VLAN. This includes bridge management frames originated
by this device that are classified as belonging to this
VLAN (e.g., GMRP, but not GVRP or STP).ro Counter32 .1.3.6.1.2.1.17.7.1.4.6.1.2 |
dot1qTpVlanPortInDiscardsThe number of valid frames received by this port from
its segment that were classified as belonging to this
VLAN and that were discarded due to VLAN-related reasons.
Specifically, the IEEE 802.1Q counters for Discard
Inbound and Discard on Ingress Filtering.ro Counter32 .1.3.6.1.2.1.17.7.1.4.6.1.3 |
dot1qTpVlanPortInOverflowFramesThe number of times the associated
dot1qTpVlanPortInFrames counter has overflowed.ro Counter32 .1.3.6.1.2.1.17.7.1.4.6.1.4 |
dot1qTpVlanPortOutOverflowFramesThe number of times the associated
dot1qTpVlanPortOutFrames counter has overflowed.ro Counter32 .1.3.6.1.2.1.17.7.1.4.6.1.5 |
dot1qTpVlanPortInOverflowDiscardsThe number of times the associated
dot1qTpVlanPortInDiscards counter has overflowed.ro Counter32 .1.3.6.1.2.1.17.7.1.4.6.1.6 |
dot1qPortVlanHCStatisticsTableA table containing per-port, per-VLAN statistics for
traffic on high-capacity interfaces. SEQUENCE OF Dot1qPortVlanHCStatisticsEntry .1.3.6.1.2.1.17.7.1.4.7 |
dot1qPortVlanHCStatisticsEntryTraffic statistics for a VLAN on a high-capacity
interface. Dot1qPortVlanHCStatisticsEntry .1.3.6.1.2.1.17.7.1.4.7.1 |
dot1qTpVlanPortHCInFramesThe number of valid frames received by this port from
its segment that were classified as belonging to this
VLAN. Note that a frame received on this port is
counted by this object if and only if it is for a
protocol being processed by the local forwarding process
for this VLAN. This object includes received bridge
management frames classified as belonging to this VLAN
(e.g., GMRP, but not GVRP or STP).ro Counter64 .1.3.6.1.2.1.17.7.1.4.7.1.1 |
dot1qTpVlanPortHCOutFramesThe number of valid frames transmitted by this port to
its segment from the local forwarding process for this
VLAN. This includes bridge management frames originated
by this device that are classified as belonging to this
VLAN (e.g., GMRP, but not GVRP or STP).ro Counter64 .1.3.6.1.2.1.17.7.1.4.7.1.2 |
dot1qTpVlanPortHCInDiscardsThe number of valid frames received by this port from
its segment that were classified as belonging to this
VLAN and that were discarded due to VLAN-related reasons.
Specifically, the IEEE 802.1Q counters for Discard
Inbound and Discard on Ingress Filtering.ro Counter64 .1.3.6.1.2.1.17.7.1.4.7.1.3 |
dot1qLearningConstraintsTableA table containing learning constraints for sets of
Shared and Independent VLANs. SEQUENCE OF Dot1qLearningConstraintsEntry .1.3.6.1.2.1.17.7.1.4.8 |
dot1qLearningConstraintsEntryA learning constraint defined for a VLAN. Dot1qLearningConstraintsEntry .1.3.6.1.2.1.17.7.1.4.8.1 |
dot1qConstraintVlanThe index of the row in dot1qVlanCurrentTable for the
VLAN constrained by this entry. VlanIndex .1.3.6.1.2.1.17.7.1.4.8.1.1 |
dot1qConstraintSetThe identity of the constraint set to which
dot1qConstraintVlan belongs. These values may be chosen
by the management station. Integer32 .1.3.6.1.2.1.17.7.1.4.8.1.2 |
dot1qConstraintTypeThe type of constraint this entry defines.
independent(1) - the VLAN, dot1qConstraintVlan,
uses a filtering database independent from all
other VLANs in the same set, defined by
dot1qConstraintSet.
shared(2) - the VLAN, dot1qConstraintVlan, shares
the same filtering database as all other VLANs
in the same set, defined by dot1qConstraintSet.rw Enumeration .1.3.6.1.2.1.17.7.1.4.8.1.3 |
dot1qConstraintStatusThe status of this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.2.1.17.7.1.4.8.1.4 |
dot1qConstraintSetDefaultThe identity of the constraint set to which a VLAN
belongs, if there is not an explicit entry for that VLAN
in dot1qLearningConstraintsTable.
The value of this object MUST be retained across
reinitializations of the management system.rw Integer32 .1.3.6.1.2.1.17.7.1.4.9 |
dot1qConstraintTypeDefaultThe type of constraint set to which a VLAN belongs, if
there is not an explicit entry for that VLAN in
dot1qLearningConstraintsTable. The types are as defined
for dot1qConstraintType.
The value of this object MUST be retained across
reinitializations of the management system.rw Enumeration .1.3.6.1.2.1.17.7.1.4.10 |
dot1vProtocol OBJECT IDENTIFIER .1.3.6.1.2.1.17.7.1.5 |
dot1vProtocolGroupTableA table that contains mappings from Protocol
Templates to Protocol Group Identifiers used for
Port-and-Protocol-based VLAN Classification. SEQUENCE OF Dot1vProtocolGroupEntry .1.3.6.1.2.1.17.7.1.5.1 |
dot1vProtocolGroupEntryA mapping from a Protocol Template to a Protocol
Group Identifier. Dot1vProtocolGroupEntry .1.3.6.1.2.1.17.7.1.5.1.1 |
dot1vProtocolTemplateFrameTypeThe data-link encapsulation format or the
'detagged_frame_type' in a Protocol Template. Enumeration .1.3.6.1.2.1.17.7.1.5.1.1.1 |
dot1vProtocolTemplateProtocolValueThe identification of the protocol above the data-link
layer in a Protocol Template. Depending on the
frame type, the octet string will have one of the
following values:
For 'ethernet', 'rfc1042' and 'snap8021H',
this is the 16-bit (2-octet) IEEE 802.3 Type Field.
For 'snapOther',
this is the 40-bit (5-octet) PID.
For 'llcOther',
this is the 2-octet IEEE 802.2 Link Service Access
Point (LSAP) pair: first octet for Destination Service
Access Point (DSAP) and second octet for Source Service
Access Point (SSAP). OCTET STRING .1.3.6.1.2.1.17.7.1.5.1.1.2 |
dot1vProtocolGroupIdRepresents a group of protocols that are associated
together when assigning a VID to a frame.rw Integer32 .1.3.6.1.2.1.17.7.1.5.1.1.3 |
dot1vProtocolGroupRowStatusThis object indicates the status of this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.2.1.17.7.1.5.1.1.4 |
dot1vProtocolPortTableA table that contains VID sets used for
Port-and-Protocol-based VLAN Classification. SEQUENCE OF Dot1vProtocolPortEntry .1.3.6.1.2.1.17.7.1.5.2 |
dot1vProtocolPortEntryA VID set for a port. Dot1vProtocolPortEntry .1.3.6.1.2.1.17.7.1.5.2.1 |
dot1vProtocolPortGroupIdDesignates a group of protocols in the Protocol
Group Database. Integer32 .1.3.6.1.2.1.17.7.1.5.2.1.1 |
dot1vProtocolPortGroupVidThe VID associated with a group of protocols for
each port.rw Integer32 .1.3.6.1.2.1.17.7.1.5.2.1.2 |
dot1vProtocolPortRowStatusThis object indicates the status of this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.2.1.17.7.1.5.2.1.3 |
qBridgeConformance OBJECT IDENTIFIER .1.3.6.1.2.1.17.7.2 |
qBridgeGroups OBJECT IDENTIFIER .1.3.6.1.2.1.17.7.2.1 |
qBridgeCompliances OBJECT IDENTIFIER .1.3.6.1.2.1.17.7.2.2 |
More MIBs from Default
Browse all DefaultMIBs →RC-TLS-MIB
SNMP MIB module
2614 objects→
AVAYA-WLAN-MIB
The AVAYA-WLAN-MIB provides SNMP-based management and monitoring capabilities for Avaya wireless LAN infrastructure, enabling the collection of performance metrics such as access point status, client association counts, signal strength, and radio interface statistics. This module facilitates the tracking of WLAN-specific events and configuration parameters to support network availability and troubleshooting within Avaya wireless deployments.
2022 objects→
VMWARE-NSX-MIB
The VMWARE-NSX-MIB enables SNMP-based monitoring and management of VMware NSX-T Data Center virtual network infrastructure, exposing metrics for logical switches, routers, distributed firewalls, and overlay tunnel states. It facilitates the tracking of Layer 2 through Layer 7 service instances, including access control lists, Quality of Service policies, and virtual network topology changes within the software-defined networking environment.
1035 objects→
923switch.m
Standard SNMP MIB module defining data structures for 923switch.m.
999 objects→
CTATX-MIB
Standard SNMP MIB module defining data structures for CTATX-MIB.
747 objects→
DC-BGP-MIB
SNMP MIB module
652 objects→