IEEE-802DOT17-RPR-MIB
The resilient packet ring MIB for IEEE 802.17. Copyright (C) IEEE802.17. This version of this MIB module is part of IEEE802.17; see the draft itself for full legal notices.
Main OID:
ieee802dot17rprMIB.1.0.8802.17.1.1
531
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
531 total| Object Name |
|---|
ieee802dot17rprMIBThe resilient packet ring MIB for IEEE 802.17. Copyright (C) IEEE802.17. This version of this MIB module is part of IEEE802.17; see the draft itself for full legal notices. MODULE-IDENTITY .1.0.8802.17.1.1 |
rprObjects OBJECT IDENTIFIER .1.0.8802.17.1.1.1 |
rprGeneral OBJECT IDENTIFIER .1.0.8802.17.1.1.1.1 |
rprIfTableThe RPR interface table, extension to the ifTable. All read-write attributes in this table are non-volatile, i.e. will be retained across system reset. SEQUENCE OF RprIfEntry .1.0.8802.17.1.1.1.1.1 |
rprIfEntryOne such entry for every interface in the ifTable which has an ifType of RPR interface. RprIfEntry .1.0.8802.17.1.1.1.1.1.1 |
rprIfIndexThe ifIndex of this RPR interface. InterfaceIndex (IF-MIB) .1.0.8802.17.1.1.1.1.1.1.1 |
rprIfStationsOnRingThe number of stations on the RPR ring. When the operStatus of the interface is down the value is 1.ro Unsigned32 .1.0.8802.17.1.1.1.1.1.1.2 |
rprIfReversionModeThe reversion mode of the MAC, False for non-revertive True for revertive. Revertive station will return to idle state after WTR interval expires. Default value for reversion mode is true.rw TruthValue (SNMPv2-TC) .1.0.8802.17.1.1.1.1.1.1.3 |
rprIfProtectionWTRIndicates the length of time in seconds, to remain in the protection state, after the cause of an automatic protection is removed. This mechanism prevents protection switch oscillations. Default value for WTR is 10 seconds.rw Unsigned32 .1.0.8802.17.1.1.1.1.1.1.4 |
rprIfProtectionFastTimerIndicates the protection messages fast timer value in 1 ms units. The fast timer is used for protection protocols. Default value for fast timer protection messages is 10 ms.rw Unsigned32 .1.0.8802.17.1.1.1.1.1.1.5 |
rprIfProtectionSlowTimerIndicates the protection slow timer value in 50 ms units. The slow timer is used for topology and protection protocols. Default value for slow timer protection and topology messages is 20 units of 50 ms, i.e. 1sec.rw Unsigned32 .1.0.8802.17.1.1.1.1.1.1.6 |
rprIfAtdTimerIndicates the timer period for ATD message transmissions. Default value is 20 units of 50 ms, i.e. 1sec.rw Unsigned32 .1.0.8802.17.1.1.1.1.1.1.7 |
rprIfKeepaliveTimeoutIndicates the timer to declare keepalive timeout, multiples of 1 millisecond. Default value for keepalive timeout is 3 ms.rw Unsigned32 .1.0.8802.17.1.1.1.1.1.1.8 |
rprIfFairnessAggressiveIndicates whether the selected RPR fairness algorithm is aggressive or conservative. If true, the selected fairness mode is aggressive. If false, the selected fairness mode is conservative. The default value for fairness aggressive is true.rw TruthValue (SNMPv2-TC) .1.0.8802.17.1.1.1.1.1.1.9 |
rprIfPtqSizeThe size in bytes of the Primary Transit Queue per ringlet supported by this RPR MAC.ro Unsigned32 UNITS "Bytes" .1.0.8802.17.1.1.1.1.1.1.10 |
rprIfStqSizeThe size in bytes of the Secondary Transit Queue per ringlet supported by this RPR MAC.ro Unsigned32 UNITS "Bytes" .1.0.8802.17.1.1.1.1.1.1.11 |
rprIfSTQFullThresholdA level of STQ occupancy at or above which the STQ is almost full. This attribute specifies the full threshold location in MTU units below the STQ size. The range is [stqHighThreshold + mtuSize, sizeSTQ - mtuSize]. The default value for stqFullThreshold is sizeSTQ - 2*mtuSize.rw Unsigned32 UNITS "MTUs" .1.0.8802.17.1.1.1.1.1.1.12 |
rprIfIdleThresholdIndicates that a MAC is experiencing an adverse rate mismatch. When the PTQ depth exceeds this value, the incoming link is considered adversely rate mismatched. This attribute specifies the idle-threshold location from the top of the PTQ buffer, in MTU size. Default value should be 1, which means (sizePTQ - mtuSize)rw Unsigned32 UNITS "MTUs" .1.0.8802.17.1.1.1.1.1.1.13 |
rprIfSesThresholdIndicates the number of E-RPR errors to declare a second as SES-RPR The default value is the rounded integer of 0.000001 * (lineRate * advertisementRatio).rw Unsigned32 .1.0.8802.17.1.1.1.1.1.1.14 |
rprIfWrapConfigIndicates the configured protection mode, steering or wrapping, in a MAC that supports both modes. If wrap configured bit is set, the station will perform wrap protection during ring failures. If the station detects another station on the ring that has a protection configuration that conflicts with its own, the station will generate a defect to higher layers. Default value for wrap preferred is false for steering only stations, and true for stations that implement wrapping.rw TruthValue (SNMPv2-TC) .1.0.8802.17.1.1.1.1.1.1.15 |
rprIfJumboFramePreferredIndicates the preference of the manager to support jumbo frame in a MAC that supports jumbo frame. The station advertises the 'logical and' of rprIfJumboFramePreferred and jumbo capable bit in the rprIfMacCapability. Default value for jumbo frame preferred is true. i.e. station supports jumbo frame.rw TruthValue (SNMPv2-TC) .1.0.8802.17.1.1.1.1.1.1.16 |
rprIfMacOperModesThe summary of the Mac operational modes. if strictOrder is set, the MAC operates in strict order mode. if dropBadFcs is set, frames with bad FCS are dropped.ro Bits .1.0.8802.17.1.1.1.1.1.1.17 |
rprIfRingOperModesThe summary of the ring operational modes collected through the topology discovery protocol. If at least one station doesn't support jumbo frames, the jumboFrame bit in this attribute is set to false. Only if all stations support jumbo frames, the bit is true. If at least one station wasn't configured to wrap, the wrap bit in this attribute is set to false. Only if all stations configured to wrap, the bit is true. If the ring doesn't complete full loop, the ring is considered openRing, with at least one detected edge.ro Bits .1.0.8802.17.1.1.1.1.1.1.18 |
rprIfCurrentStatusIndicates the current status of the RPR interface. this attribute is used to generate alarm to the management system.ro Bits .1.0.8802.17.1.1.1.1.1.1.19 |
rprIfLastChangeThe value of sysUpTime at the time when any of the following attributes changes: rprIfStationsOnRing, rprIfReversionMode, rprIfProtectionWTR, rprIfProtectionFastTimer, rprIfProtectionSlowTimer, rprIfAtdTimer, rprIfKeepaliveTimeout, rprIfFairnessAggressive, rprIfSTQFullThreshold, rprIfIdleThreshold, rprIfSesThreshold, rprIfWrapConfig, rprIfJumboFramePreferred, rprIfMacOperModes, rprIfRingOperModes, rprIfCurrentStatus contents of the rprTopoImageEntry.ro TimeStamp (SNMPv2-TC) .1.0.8802.17.1.1.1.1.1.1.20 |
rprIfChangesIndicates number of times rprIfLastChange changed. The discontinued counter value is indicated by the ifCounterDiscontinuityTime value.ro Counter32 .1.0.8802.17.1.1.1.1.1.1.21 |
rprIfStatsControlTableThe RPR statistics management table, controls the collection, duration, clearance, and status of the MAC statistics. The usage of this table is as follows: 1. In order to clear period of counters (or all periods) of specific counting point (or all counting points) of the RPR MAC, the user should first set the rprIfStatsControlPeriodClear item to specify the period that he would like to clear, and the rprIfStatsControlCountPointClear item to specify the counting point on which he would like to perform the statistics clearance. In case that the user specified 'clearSpecificInterval' in the rprIfStatsControlPeriodClear item, the user should also set the specific interval to clear by setting rprIfStatsControlIntervalClear. After setting these items, the user can activate the clear operation by setting rprIfStatsControlCommitClear item to 'commit'. The status of the clear operation (done of failed) is indicated by the returned value of rprIfStatsControlCommitClear item. 2. Setting rprIfStatsControlPeriodClear to 'clearAllIntervals' and rprIfStatsControlCountPointClear to 'clearWest' (for example) will clear all current and previous intervals, and day counters of the west side of the RPR MAC. 3. The IntervalValidData of cleared interval should be set to false. All read-write attributes in this table are volatile, i.e. will be cleared on system reset. SEQUENCE OF RprIfStatsControlEntry .1.0.8802.17.1.1.1.1.2 |
rprIfStatsControlEntryOne such entry for every interface in the ifTable which has an ifType of RPR interface. RprIfStatsControlEntry .1.0.8802.17.1.1.1.1.2.1 |
rprIfStatsControlIfIndexThe ifIndex of this RPR interface. InterfaceIndex (IF-MIB) .1.0.8802.17.1.1.1.1.2.1.1 |
rprIfStatsControlPeriodClearThis attribute allows for some or all of the interval statistics for this RPR MAC to be cleared. It does not affect the values of the running counters or the counter values reported through the interface MIB. clearSpecificInterval clears the interval indicated by rprIfStatsControlIntervalClear. Default value for period clear is idle.rw Enumeration .1.0.8802.17.1.1.1.1.2.1.2 |
rprIfStatsControlCountPointClearThis attribute allows for a specific counting point of the RPR MAC or all of the RPR MAC counting points to be cleared on rprIfStatsControlPeriodClear request. Default value for Interface to clear is clearAll, i.e. clear statistics of all interfaces.rw Enumeration .1.0.8802.17.1.1.1.1.2.1.3 |
rprIfStatsControlIntervalClearThe statistics interval number to clear. The interval identified by 1 is the most recently completed 15 minute interval, and interval identified by N is the interval immediately preceding the one identified by N-1. Setting rprIfStatsControlPeriodClear to clearSpecificInterval will clear the interval that is indicated by this object.rw Unsigned32 .1.0.8802.17.1.1.1.1.2.1.4 |
rprIfStatsControlCommitClearSends a commit with input parameters to specify the Period (rprIfStatsControlPeriodClear), count point (rprIfStatsControlCountPointClear) and specific interval (rprIfStatsControlIntervalClear) to clear. If the clear operation succeeds this attribute will have the value commitDone(2) when read. If the clear operation fails this attribute will have the value commitFailed(3) when read.rw Enumeration .1.0.8802.17.1.1.1.1.2.1.5 |
rprIfStatsControlTimeElapsedThe number of seconds, including partial seconds, that have elapsed since the beginning of the current measurement interval. If, for some reason, such as an adjustment in the system's time-of-day clock, the current interval exceeds the maximum value, the agent will return the maximum value.ro Unsigned32 .1.0.8802.17.1.1.1.1.2.1.6 |
rprIfStatsControlValidIntervalsThe number of previous 15-minute intervals for which data was collected. An RPR interface must be capable of supporting at least n intervals. The minimum value of n is 4. The default of n is 32. The maximum value of n is 96. The value will be <n> unless the measurement was (re-)started within the last (<n>*15) minutes, in which case the value will be the number of complete 15 minute intervals for which the agent has at least some data. In certain cases (e.g., in the case where the agent is a proxy) it is possible that some intervals are unavailable. In this case, this interval is the maximum interval number for which data is available.ro Unsigned32 .1.0.8802.17.1.1.1.1.2.1.7 |
rprSpanTableThe RPR interface Span table. All read-write attributes in this table are non-volatile, i.e. will be retained across system reset. SEQUENCE OF RprSpanEntry .1.0.8802.17.1.1.1.1.3 |
rprSpanEntryOne such entry for every span of an RPR interface. RprSpanEntry .1.0.8802.17.1.1.1.1.3.1 |
rprSpanIfIndexThe ifIndex of this RPR interface. InterfaceIndex (IF-MIB) .1.0.8802.17.1.1.1.1.3.1.1 |
rprSpanIdIndicates the span interface of the RPR MAC. Each RPR span is connected to both ringlet0 and ringlet1. The east span receives from ringlet1 and transmits through ringlet0. The west span receives from ringlet0 and transmits through ringlet1. RprSpan .1.0.8802.17.1.1.1.1.3.1.2 |
rprSpanLowerLayerIfIndexThe ifIndex of interface which is below the RPR layer in this span. A value of zero indicates an interface index that has yet to be determinedro InterfaceIndexOrZero (IF-MIB) .1.0.8802.17.1.1.1.1.3.1.3 |
rprSpanTotalRingletReservedRateThe total reserved subclassA0 bandwidth on the ringlet. This variable is used by the fairness module to determine the total reclaimable bandwidth.ro Unsigned32 UNITS "Mb/s" .1.0.8802.17.1.1.1.1.3.1.4 |
rprSpanCurrentStatusIndicates the current status of the RPR span. this attribute is used to generate alarm to the management system.ro Bits .1.0.8802.17.1.1.1.1.3.1.5 |
rprSpanLastChangeThe value of sysUpTime at the time when any of the following attributes changes: rprSpanCurrentStatus, rprSpanProtectionNeighborValid, rprSpanProtectionHoldOffTimer, rprSpanProtectionCommand, rprSpanProtectionCount.ro TimeStamp (SNMPv2-TC) .1.0.8802.17.1.1.1.1.3.1.6 |
rprSpanChangesIndicates number of times rprSpanLastChange changed. The discontinued counter value is indicated by the ifCounterDiscontinuityTime value.ro Counter32 .1.0.8802.17.1.1.1.1.3.1.7 |
rprSpanProtectionTableThe RPR interface Span protection management table. All read-write attributes in this table are non-volatile, i.e. will be retained across system reset. SEQUENCE OF RprSpanProtectionEntry .1.0.8802.17.1.1.1.1.4 |
rprSpanProtectionEntryOne such entry for every span of an RPR interface. RprSpanProtectionEntry .1.0.8802.17.1.1.1.1.4.1 |
rprSpanProtectionIfIndexThe ifIndex of this RPR interface. InterfaceIndex (IF-MIB) .1.0.8802.17.1.1.1.1.4.1.1 |
rprSpanProtectionSpanThe Span for this entry. RprSpan .1.0.8802.17.1.1.1.1.4.1.2 |
rprSpanProtectionNeighborValidIndicates whether the neighbor address is active or former. true value for active, false for formerro TruthValue (SNMPv2-TC) .1.0.8802.17.1.1.1.1.4.1.3 |
rprSpanProtectionHoldOffTimerThe period that RPR gives to lower layer to perform protection, before it activates its protection mechanism. Default value of hold off timer is 0.rw Unsigned32 .1.0.8802.17.1.1.1.1.4.1.4 |
rprSpanProtectionCommandThe protection mode requested by management for the local station that can affect the protection status of the RPR station, according to the set of rules describing the RPR protection. When read, this object returns the last command written unless it has been preempted, or idle if no command has been written to this interface span since initialization. There is no pending of commands, that is if a command has been preempted by a failure, when the failure clears the command is not executed. If the command cannot be executed because an equal or \ higher priority request is in effect, an error is returned. writing idle to a span that has no pending protection command, has no affect. An idle clears an active WTR state. The protection commands (arranged in ascending priority order) are: idle This command clears the protection for the specified interface span. This value should be returned by a read request when no protection command has been written to the object. manualSwitch A protection command on each end of a specified span. This command doesn't have precedence over automatic protection, and therefore it can't preempt an existing automatic protection request. forcedSwitch A command on each end of a specified span. This command has precedence over automatic protection, and therefore it can preempt an existing automatic protection request. Default value of protection command is idle.rw Enumeration .1.0.8802.17.1.1.1.1.4.1.5 |
rprSpanProtectionCountThe number of transitions from idle state to active protection state. The discontinued counter value is indicated by the ifCounterDiscontinuityTime value.ro Counter32 .1.0.8802.17.1.1.1.1.4.1.6 |
rprSpanProtectionDurationThe total amount of time protection was active on the span interface. The discontinued counter value is indicated by the ifCounterDiscontinuityTime value.ro Counter32 UNITS "seconds" .1.0.8802.17.1.1.1.1.4.1.7 |
rprSpanProtectionLastActivationTimeThe value of sysUpTime at the time of the last protection activation.ro TimeStamp (SNMPv2-TC) .1.0.8802.17.1.1.1.1.4.1.8 |
rprIfChangeSummaryObject OBJECT IDENTIFIER .1.0.8802.17.1.1.1.1.5 |
rprIfChangeSummaryNumInterfacesNumber of RPR interfaces on this device.ro Unsigned32 .1.0.8802.17.1.1.1.1.5.1 |
rprIfChangeSummaryIfLastChangeLatest timestamp when any instance of rprIfLastChange changed.ro TimeStamp (SNMPv2-TC) .1.0.8802.17.1.1.1.1.5.2 |
rprIfChangeSummaryIfChangesNumber of times any instance of rprIfChanges changed. The discontinued counter value is indicated by the ifCounterDiscontinuityTime value.ro Counter32 .1.0.8802.17.1.1.1.1.5.3 |
rprIfChangeSummarySpanLastChangeLatest timestamp when any instance of rprSpanLastChange changed.ro TimeStamp (SNMPv2-TC) .1.0.8802.17.1.1.1.1.5.4 |
rprIfChangeSummarySpanChangesNumber of times any instance of rprSpanChanges changed. The discontinued counter value is indicated by the ifCounterDiscontinuityTime value.ro Counter32 .1.0.8802.17.1.1.1.1.5.5 |
rprIfChangeSummaryFairnessLastChangeLatest timestamp when any instance of rprFairnessLastChange changed.ro TimeStamp (SNMPv2-TC) .1.0.8802.17.1.1.1.1.5.6 |
rprIfChangeSummaryFairnessChangesNumber of times any instance of rprFairnessChanges changed. The discontinued counter value is indicated by the ifCounterDiscontinuityTime value.ro Counter32 .1.0.8802.17.1.1.1.1.5.7 |
rprProtocols OBJECT IDENTIFIER .1.0.8802.17.1.1.1.2 |
rprTopoImageTableA topology map that details the list of stations on the RPR ringlets. All attributes in this table are volatile, i.e. will be cleared on system reset. SEQUENCE OF RprTopoImageEntry .1.0.8802.17.1.1.1.2.1 |
rprTopoImageEntryEach entry contains information specific to a particular station on the ring. The table has at least one entry for the station itself, this entry indicates zero hops on each ringlet. RprTopoImageEntry .1.0.8802.17.1.1.1.2.1.1 |
rprTopoImageIfIndexThe ifIndex of this RPR interface. InterfaceIndex (IF-MIB) .1.0.8802.17.1.1.1.2.1.1.1 |
rprTopoImageMacAddressThe 48-bit MAC address of the station. MacAddress (SNMPv2-TC) .1.0.8802.17.1.1.1.2.1.1.2 |
rprTopoImageSecMacAddress1The 48-bit first secondary MAC address of the station. Default and unused value is FF:FF:FF:FF:FF:FFro MacAddress (SNMPv2-TC) .1.0.8802.17.1.1.1.2.1.1.3 |
rprTopoImageSecMacAddress2The 48-bit second secondary MAC address of the station. Default and unused value is FF:FF:FF:FF:FF:FFro MacAddress (SNMPv2-TC) .1.0.8802.17.1.1.1.2.1.1.4 |
rprTopoImageStationIfIndexThe station ifIndex.ro InterfaceIndex (IF-MIB) .1.0.8802.17.1.1.1.2.1.1.5 |
rprTopoImageStationNameThe operator assigned station name.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.0.8802.17.1.1.1.2.1.1.6 |
rprTopoImageInetAddressTypeDenotes the address type of the station INET address It should be set to 'unknown' if station INET address is not known.ro InetAddressType (INET-ADDRESS-MIB) .1.0.8802.17.1.1.1.2.1.1.7 |
rprTopoImageInetAddressThis object contains the value of of the station IP (v4 or V6) address. The format of this address is specified by the value of the corresponding rprTopoImageInetAddressType object. If the address type is unknown, then this object contains the zero-length OCTET-STRING.ro InetAddress (INET-ADDRESS-MIB) .1.0.8802.17.1.1.1.2.1.1.8 |
rprTopoImageCapabilityIndicates the capabilities that the MAC supports. jumboFrames - Indicates whether the MAC capable of receiving, transmitting and transiting jumbo frames. wrapProtection - Indicates whether the MAC configured to wrap protection. supportsConservativeFairness - indicates the MAC supports conservative fairness algorithm.ro Bits .1.0.8802.17.1.1.1.2.1.1.9 |
rprTopoImageRinglet0HopsThe number of hops to this station through ringlet0. The self station is indicated with zero hops. A non reachable station is indicated with -1 value.ro Integer32 .1.0.8802.17.1.1.1.2.1.1.10 |
rprTopoImageRinglet0ReservedRateThe amount of A0 traffic that this station adds on ringlet0, in Mb/s units.ro Unsigned32 UNITS "Mb/s" .1.0.8802.17.1.1.1.2.1.1.11 |
rprTopoImageRinglet1HopsThe number of hops to this station through ringlet1. The self station is indicated with zero hops. A non reachable station is indicated with -1 value.ro Integer32 .1.0.8802.17.1.1.1.2.1.1.12 |
rprTopoImageRinglet1ReservedRateThe amount of A0 traffic that this station adds on ringlet1, in Mb/s units.ro Unsigned32 UNITS "Mb/s" .1.0.8802.17.1.1.1.2.1.1.13 |
rprTopoImageWestProtectionStatusThe current protection status of the West span.ro RprProtectionStatus .1.0.8802.17.1.1.1.2.1.1.14 |
rprTopoImageWestWeightThe weight of the station on the west span. used for weighted fairness.ro Unsigned32 .1.0.8802.17.1.1.1.2.1.1.15 |
rprTopoImageEastProtectionStatusThe current protection status of the east span.ro RprProtectionStatus .1.0.8802.17.1.1.1.2.1.1.16 |
rprTopoImageEastWeightThe weight of the station on the east span. Used for weighted fairness.ro Unsigned32 .1.0.8802.17.1.1.1.2.1.1.17 |
rprTopoImageStatusStatus of the station, the reachability of station through ringlet0 and ringlet1, wrap active on the station spans, events of reception frames with bad FCS, events of reception multichoke fairness frames.ro Bits .1.0.8802.17.1.1.1.2.1.1.18 |
rprFairnessTableA table of RPR Fairness per RPR span. All read-write attributes in this table are non-volatile, i.e. will be retained across system reset. SEQUENCE OF RprFairnessEntry .1.0.8802.17.1.1.1.2.2 |
rprFairnessEntryA fairness parameters for a particular ringlet of the an RPR interface. RprFairnessEntry .1.0.8802.17.1.1.1.2.2.1 |
rprFairnessIfIndexThe ifIndex of this RPR interface. InterfaceIndex (IF-MIB) .1.0.8802.17.1.1.1.2.2.1.1 |
rprFairnessRingletThe ringlet for which this row contains information. ringlet0 is the transmission of the east span and the reception of the west span, ringlet1 is the transmission of the west span and the reception of the east span Enumeration .1.0.8802.17.1.1.1.2.2.1.2 |
rprFairnessRingletWeightWeight assigned to fairness to permit the scaling of fair rate values among stations on the ringlet. This allows one station to use a larger share of available capacity than another station without violating fairness principles. The allowed range is [1, 255]. The default value is 1.rw Unsigned32 .1.0.8802.17.1.1.1.2.2.1.3 |
rprFairnessReservedRateThe amount of A0 traffic that this station adds that ringlet, in Mb/s units. Default value for A0 reserved rate is 0 Mb/s.rw Unsigned32 UNITS "Mb/s" .1.0.8802.17.1.1.1.2.2.1.4 |
rprFairnessMaxAllowedThe maximum value that the station is allowed to transmit local excess traffic to the ringlet. The default value is the physical ring rate.rw Unsigned32 UNITS "Mb/s" .1.0.8802.17.1.1.1.2.2.1.5 |
rprFairnessAgeCoefThe coefficient used by the aging procedure to specify the relative weights assigned to (a) the change in the value of a rate-counter during the most recent agingInterval and (b) the value of the rate-counter at the end of the previous agingInterval. The value is interpreted as 2 raised to the power specified by this attribute. The default value is 2, giving an aging coefficient of 2**2, or 4.rw Unsigned32 .1.0.8802.17.1.1.1.2.2.1.6 |
rprFairnessRampCoefThe coefficient used for ramping a rate. The value is interpreted as 2 raised to the power specified by this attribute. The default value is 6, giving a low-pass coefficient of 2**6, or 64.rw Unsigned32 .1.0.8802.17.1.1.1.2.2.1.7 |
rprFairnessLpCoefThe coefficient used by the low-pass filter procedure to specify the relative weights applied to (a) the increase in the rate-count value during the most recent agingInterval and (b) the previous low-pass filtered rate. The former is assigned a weight of 1 and the latter a weight of (lpCoef-1). The value is interpreted as 2 raised to the power specified by this attribute. The default value is 6, giving a low-pass coefficient of 2**6, or 64.rw Unsigned32 .1.0.8802.17.1.1.1.2.2.1.8 |
rprFairnessAdvertisementRatioThe ratio between the link capacity reserved for fairness control messages and the total link capacity. Default value of fairness advertisement ratio is 5 units of 0.00025, i.e 0.00125.rw Unsigned32 .1.0.8802.17.1.1.1.2.2.1.9 |
rprFairnessMcffReportCoefIndicates the number of SCFF advertisingIntervals that elapse between the sending of successive MCFFs, This value allows the interval between sending MCFFs to be established as MCFF_reportingInterval = rprFairnessMcffReportCoef * SCFF_avertisingInterval. The default value is 10.rw Unsigned32 .1.0.8802.17.1.1.1.2.2.1.10 |
rprFairnessActiveWeightsCoefIndicates the number of agingIntervals that elapse between successive computations of activeWeights. This value allows the interval between computations of activeWeights to be established as activeWeightsInterval = activeWeightsCoef * agingInterval. The default value is 64.rw Unsigned32 .1.0.8802.17.1.1.1.2.2.1.11 |
rprFairnessSTQHighThresholdA level of STQ occupancy at or above which CSFE frames are no longer admitted. Defined only for a dual transit-queue implementation. This attribute specifies the high threshold location in percentage of the STQ size. The allowed range is [2*mtuSize, stqFullThreshold -mtuSize]. The default value is 0.25*stqFullThreshold.rw Unsigned32 .1.0.8802.17.1.1.1.2.2.1.12 |
rprFairnessSTQMedThresholdA level of buffer occupancy in a dual-queue deployment, at or above which congestion on the outbound link is declared. This attribute specifies the medium threshold location in percentage of the STQ size. The allowed range is [stqLowThreshold + mtuSize, stqHighThreshold - mtuSize]. The default value is 0.5 * (stqHighThreshold + stqLowThreshold).rw Unsigned32 .1.0.8802.17.1.1.1.2.2.1.13 |
rprFairnessSTQLowThresholdA level of STQ occupancy at or above which congestion on the outbound link is imminent. Defined only for dual transit-queue implementations. This attribute specifies the low threshold location in percentage of the STQ size. The range is [mtuSize, stqHighThreshold -mtuSize]. The default value is 0.5*stqHighThreshold.rw Unsigned32 .1.0.8802.17.1.1.1.2.2.1.14 |
rprFairnessRateHighThresholdRate at or above which congestion on the outbound link is declared. The range is [0.4 * unreservedRate, 0.99 * unreservedRate]. The default value is 0.95 * unreservedRate.rw Unsigned32 .1.0.8802.17.1.1.1.2.2.1.15 |
rprFairnessRateLowThresholdRate at or above which congestion on the outbound link is imminent. The range is [0.5 * rateHighThreshold, 0.99 * rateHighThreshold]. The default value is 0.9 * rateHighThresholdrw Unsigned32 .1.0.8802.17.1.1.1.2.2.1.16 |
rprFairnessResetWaterMarksWrite resetWaterMarks to this attribute to reset the STQ water marks to the current occupancy. Default value is idlerw Enumeration .1.0.8802.17.1.1.1.2.2.1.17 |
rprFairnessSTQHighWaterMarkThe highest level of STQ occupancy since the last reset of this value, in percentage of the STQ size.ro Unsigned32 .1.0.8802.17.1.1.1.2.2.1.18 |
rprFairnessSTQLowWaterMarkThe lowest level of STQ occupancy since the last reset of this value, in percentage of the STQ size.ro Unsigned32 .1.0.8802.17.1.1.1.2.2.1.19 |
rprFairnessLastChangeThe value of sysUpTime at the time when any of the following attributes changes: rprFairnessRingletWeight, rprFairnessReservedRate, rprFairnessMaxAllowed, rprFairnessAgeCoef, rprFairnessRampCoef, rprFairnessLpCoef, rprFairnessAdvertisementRatio, rprFairnessSTQHighThreshold, rprFairnessSTQLowThreshold rprFairnessResetWaterMarks.ro TimeStamp (SNMPv2-TC) .1.0.8802.17.1.1.1.2.2.1.20 |
rprFairnessChangesIndicates number of times rprFairnessLastChange changed. The discontinued counter value is indicated by the ifCounterDiscontinuityTime value.ro Counter32 .1.0.8802.17.1.1.1.2.2.1.21 |
rprOamTableA table of RPR OAM actions. The table is designed to support a one action at a time on an RPR interface. All read-write attributes in this table are volatile, i.e. will be cleared on system reset. SEQUENCE OF RprOamEntry .1.0.8802.17.1.1.1.2.3 |
rprOamEntryOAM Echo and Flush control for an RPR interface RprOamEntry .1.0.8802.17.1.1.1.2.3.1 |
rprOamIfIndexThe ifIndex of this RPR interface. InterfaceIndex (IF-MIB) .1.0.8802.17.1.1.1.2.3.1.1 |
rprOamActionTypeThe type of OAM action. The valid values for this object are: (1) echo (2) flush.rw Enumeration .1.0.8802.17.1.1.1.2.3.1.2 |
rprOamDestAddressThe 48-bit MAC address of the destination station of OAM session.rw MacAddress (SNMPv2-TC) .1.0.8802.17.1.1.1.2.3.1.3 |
rprOamRequestRingletThe ringlet ID on which the OAM request should be sent.rw RprOamRinglet .1.0.8802.17.1.1.1.2.3.1.4 |
rprOamResponseRingletThe ringlet ID on which the OAM response should be replied.rw RprOamRinglet .1.0.8802.17.1.1.1.2.3.1.5 |
rprOamClassOfServiceThe class-of-service of OAM session framesrw Enumeration .1.0.8802.17.1.1.1.2.3.1.6 |
rprOamUserDataThe operator assigned user specific data.rw OCTET STRING .1.0.8802.17.1.1.1.2.3.1.7 |
rprOamProtectedIndicates whether the OAM action should be protected. In a wrapping ring, If true, the WE (wrap eligible) bit of the OAM action frame is set to 1. Otherwise, the WE bit is set to 0. In steering ring, If true, in case of failure on the requested ringlet between the source and the destination stations, the OAM action frame will be steered to the alternative ringlet. Otherwise, the OAM action frame will be sent through the requested ringlet regardless of its protection state.rw TruthValue (SNMPv2-TC) .1.0.8802.17.1.1.1.2.3.1.8 |
rprOamRequestCountIndicates the number of OAM requests to send. Default value of OAM request action is 1.rw Unsigned32 .1.0.8802.17.1.1.1.2.3.1.9 |
rprOamTimeoutIndicates the timer to declare OAM action timeout, in 10usec units. Default value of OAM timeout is 500 units of 10usec (i.e. 5 ms)rw Unsigned32 .1.0.8802.17.1.1.1.2.3.1.10 |
rprOamControlControl of an OAM action. The valid values for this object are: (1) idle (2) active (3) abort. Default value of OAM control is idle.rw Enumeration .1.0.8802.17.1.1.1.2.3.1.11 |
rprOamResponseCountIndicates the number of OAM actions responses received.ro Unsigned32 .1.0.8802.17.1.1.1.2.3.1.12 |
rprOamAvResponseTimeAverage response time to receive the OAM reply.ro Unsigned32 .1.0.8802.17.1.1.1.2.3.1.13 |
rprOamResponseStatusStatus of an OAM action. The valid values for this object are: (1) unknown (2) inProcess (3) error (4) success. The action status is success if at least 90% of the responses were received till timeout.ro Enumeration .1.0.8802.17.1.1.1.2.3.1.14 |
rprSpanCounters OBJECT IDENTIFIER .1.0.8802.17.1.1.1.3 |
rprSpanCountersCurrentTableThe RPR MAC Span interface current counters table. All attributes in this table are volatile, i.e. will be cleared on system reset. SEQUENCE OF RprSpanCountersCurrentEntry .1.0.8802.17.1.1.1.3.1 |
rprSpanCountersCurrentEntryFrames and octets statistics for the current interval for the RPR MAC Span interface. The corresponding instance of rprIfStatsControlTimeElapsed indicates the number of seconds which have elapsed so far in the current interval. RprSpanCountersCurrentEntry .1.0.8802.17.1.1.1.3.1.1 |
rprSpanCurrentIfIndexThe ifIndex of this RPR interface. InterfaceIndex (IF-MIB) .1.0.8802.17.1.1.1.3.1.1.1 |
rprSpanCurrentSpanAn indication of the span of the interface for which this row contains information. RprSpan .1.0.8802.17.1.1.1.3.1.1.2 |
rprSpanCurrentInUcastClassAFramesThe number of received (PHY to MAC) classA unicast frames in the current interval.ro HCPerfCurrentCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.3.1.1.3 |
rprSpanCurrentInUcastClassAOctetsThe number of received (PHY to MAC) classA unicast octets, in the current interval.ro HCPerfCurrentCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.3.1.1.4 |
rprSpanCurrentInUcastClassBCirFramesThe number of received (PHY to MAC) classB CIR unicast frames in the current interval.ro HCPerfCurrentCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.3.1.1.5 |
rprSpanCurrentInUcastClassBCirOctetsThe number of received (PHY to MAC) classB CIR unicast octets in the current interval.ro HCPerfCurrentCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.3.1.1.6 |
rprSpanCurrentInUcastClassBEirFramesThe number of received (PHY to MAC) classB EIR unicast frames in the current interval.ro HCPerfCurrentCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.3.1.1.7 |
rprSpanCurrentInUcastClassBEirOctetsThe number of received (PHY to MAC) classB EIR unicast octets in the current interval.ro HCPerfCurrentCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.3.1.1.8 |
rprSpanCurrentInUcastClassCFramesThe number of received (PHY to MAC) classC unicast frames in the current interval.ro HCPerfCurrentCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.3.1.1.9 |
rprSpanCurrentInUcastClassCOctetsThe number of received (PHY to MAC) classC unicast octets in the current interval.ro HCPerfCurrentCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.3.1.1.10 |
rprSpanCurrentInMcastClassAFramesThe number of received (PHY to MAC) classA multicast and broadcast frames in the current interval.ro HCPerfCurrentCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.3.1.1.11 |
rprSpanCurrentInMcastClassAOctetsThe number of received (PHY to MAC) classA multicast and broadcast octets in the current interval.ro HCPerfCurrentCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.3.1.1.12 |
rprSpanCurrentInMcastClassBCirFramesThe number of received (PHY to MAC) classB CIR multicast and broadcast frames in the current interval.ro HCPerfCurrentCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.3.1.1.13 |
rprSpanCurrentInMcastClassBCirOctetsThe number of received (PHY to MAC) classB CIR multicast and broadcast octets in the current interval.ro HCPerfCurrentCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.3.1.1.14 |
rprSpanCurrentInMcastClassBEirFramesThe number of received (PHY to MAC) classB EIR multicast and broadcast frames in the current interval.ro HCPerfCurrentCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.3.1.1.15 |
rprSpanCurrentInMcastClassBEirOctetsThe number of received (PHY to MAC) classB EIR multicast and broadcast octets in the current interval.ro HCPerfCurrentCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.3.1.1.16 |
rprSpanCurrentInMcastClassCFramesThe number of received (PHY to MAC) classC multicast and broadcast frames in the current interval.ro HCPerfCurrentCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.3.1.1.17 |
rprSpanCurrentInMcastClassCOctetsThe number of received (PHY to MAC) classC multicast and broadcast octets in the current interval.ro HCPerfCurrentCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.3.1.1.18 |
rprSpanCurrentOutUcastClassAFramesThe number of transmitted (MAC to PHY) classA unicast frames in the current interval.ro HCPerfCurrentCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.3.1.1.19 |
rprSpanCurrentOutUcastClassAOctetsThe number of transmitted (MAC to PHY) classA unicast octets in the current interval.ro HCPerfCurrentCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.3.1.1.20 |
rprSpanCurrentOutUcastClassBCirFramesThe number of transmitted (MAC to PHY) classB CIR unicast frames in the current interval.ro HCPerfCurrentCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.3.1.1.21 |
rprSpanCurrentOutUcastClassBCirOctetsThe number of transmitted (MAC to PHY) classB CIR unicast octets in the current interval.ro HCPerfCurrentCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.3.1.1.22 |
rprSpanCurrentOutUcastClassBEirFramesThe number of transmitted (MAC to PHY) classB EIR unicast frames in the current interval.ro HCPerfCurrentCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.3.1.1.23 |
rprSpanCurrentOutUcastClassBEirOctetsThe number of transmitted (MAC to PHY) classB EIR unicast octets in the current interval.ro HCPerfCurrentCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.3.1.1.24 |
rprSpanCurrentOutUcastClassCFramesThe number of transmitted (MAC to PHY) classC unicast frames in the current interval.ro HCPerfCurrentCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.3.1.1.25 |
rprSpanCurrentOutUcastClassCOctetsThe number of transmitted (MAC to PHY) classC unicast octets in the current interval.ro HCPerfCurrentCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.3.1.1.26 |
rprSpanCurrentOutMcastClassAFramesThe number of transmitted (MAC to PHY) classA multicast and broadcast frames in the current interval.ro HCPerfCurrentCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.3.1.1.27 |
rprSpanCurrentOutMcastClassAOctetsThe number of transmitted (MAC to PHY) classA multicast and broadcast octets in the current interval.ro HCPerfCurrentCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.3.1.1.28 |
rprSpanCurrentOutMcastClassBCirFramesThe number of transmitted (MAC to PHY) classB CIR multicast and broadcast frames in the current interval.ro HCPerfCurrentCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.3.1.1.29 |
rprSpanCurrentOutMcastClassBCirOctetsThe number of transmitted (MAC to PHY) classB CIR multicast and broadcast octets in the current interval.ro HCPerfCurrentCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.3.1.1.30 |
rprSpanCurrentOutMcastClassBEirFramesThe number of transmitted (MAC to PHY) classB EIR multicast and broadcast frames in the current interval.ro HCPerfCurrentCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.3.1.1.31 |
rprSpanCurrentOutMcastClassBEirOctetsThe number of transmitted (MAC to PHY) classB EIR multicast and broadcast octets in the current interval.ro HCPerfCurrentCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.3.1.1.32 |
rprSpanCurrentOutMcastClassCFramesThe number of transmitted (MAC to PHY) classC multicast and broadcast frames in the current interval.ro HCPerfCurrentCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.3.1.1.33 |
rprSpanCurrentOutMcastClassCOctetsThe number of transmitted (MAC to PHY) classC multicast and broadcast octets in the current interval.ro HCPerfCurrentCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.3.1.1.34 |
rprSpanCountersIntervalTableThe RPR MAC Span interface interval counters table. All attributes in this table are volatile, i.e. will be cleared on system reset. SEQUENCE OF RprSpanCountersIntervalEntry .1.0.8802.17.1.1.1.3.2 |
rprSpanCountersIntervalEntryFrames and octets statistics collected for a particular interval for the RPR MAC Span interface of a particular span of a particular RPR interface. The corresponding instance of rprIfValidIntervals indicates the number of intervals for which the set of statistics is available. RprSpanCountersIntervalEntry .1.0.8802.17.1.1.1.3.2.1 |
rprSpanIntervalIfIndexThe ifIndex of this RPR interface. InterfaceIndex (IF-MIB) .1.0.8802.17.1.1.1.3.2.1.1 |
rprSpanIntervalSpanAn indication of the span of the interface for which this row contains information. RprSpan .1.0.8802.17.1.1.1.3.2.1.2 |
rprSpanIntervalNumberA number between 1 and 96, which identifies the intervals for which the set of statistics is available. The interval identified by 1 is the most recently completed 15 minute interval, and interval identified by N is the interval immediately preceding the one identified by N-1. Unsigned32 .1.0.8802.17.1.1.1.3.2.1.3 |
rprSpanIntervalValidDataThis variable indicates if the data for this interval is valid. It will be valid if it contains data for 900 seconds plus or minus 10 seconds.ro TruthValue (SNMPv2-TC) .1.0.8802.17.1.1.1.3.2.1.4 |
rprSpanIntervalTimeElapsedThe duration of a particular interval in seconds. If, for some reason, such as an adjustment in the system's time-of-day clock, the current interval exceeds the maximum value, the agent will return the maximum value.ro Unsigned32 .1.0.8802.17.1.1.1.3.2.1.5 |
rprSpanIntervalStartTimeIndicates the wall clock time that this interval started.ro DateAndTime (SNMPv2-TC) .1.0.8802.17.1.1.1.3.2.1.6 |
rprSpanIntervalInUcastClassAFramesThe number of received (PHY to MAC) classA unicast frames in a particular interval in the past 24 hours.ro HCPerfIntervalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.3.2.1.7 |
rprSpanIntervalInUcastClassAOctetsThe number of received (PHY to MAC) classA unicast octets in a particular interval in the past 24 hours.ro HCPerfIntervalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.3.2.1.8 |
rprSpanIntervalInUcastClassBCirFramesThe number of received (PHY to MAC) classB CIR unicast frames in a particular interval in the past 24 hours.ro HCPerfIntervalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.3.2.1.9 |
rprSpanIntervalInUcastClassBCirOctetsThe number of received (PHY to MAC) classB CIR unicast octets in a particular interval in the past 24 hours.ro HCPerfIntervalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.3.2.1.10 |
rprSpanIntervalInUcastClassBEirFramesThe number of received (PHY to MAC) classB EIR unicast frames in a particular interval in the past 24 hours.ro HCPerfIntervalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.3.2.1.11 |
rprSpanIntervalInUcastClassBEirOctetsThe number of received (PHY to MAC) classB EIR unicast octets in a particular interval in the past 24 hours.ro HCPerfIntervalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.3.2.1.12 |
rprSpanIntervalInUcastClassCFramesThe number of received (PHY to MAC) classC unicast frames in a particular interval in the past 24 hours.ro HCPerfIntervalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.3.2.1.13 |
rprSpanIntervalInUcastClassCOctetsThe number of received (PHY to MAC) classC unicast octets in a particular interval in the past 24 hours.ro HCPerfIntervalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.3.2.1.14 |
rprSpanIntervalInMcastClassAFramesThe number of received (PHY to MAC) classA multicast and broadcast frames in a particular interval in the past 24 hours.ro HCPerfIntervalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.3.2.1.15 |
rprSpanIntervalInMcastClassAOctetsThe number of received (PHY to MAC) classA multicast and broadcast octets in a particular interval in the past 24 hours.ro HCPerfIntervalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.3.2.1.16 |
rprSpanIntervalInMcastClassBCirFramesThe number of received (PHY to MAC) classB CIR multicast and broadcast frames in a particular interval in the past 24 hours.ro HCPerfIntervalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.3.2.1.17 |
rprSpanIntervalInMcastClassBCirOctetsThe number of received (PHY to MAC) classB CIR multicast and broadcast octets in a particular interval in the past 24 hours.ro HCPerfIntervalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.3.2.1.18 |
rprSpanIntervalInMcastClassBEirFramesThe number of received (PHY to MAC) classB EIR multicast and broadcast frames in a particular interval in the past 24 hours.ro HCPerfIntervalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.3.2.1.19 |
rprSpanIntervalInMcastClassBEirOctetsThe number of received (PHY to MAC) classB EIR multicast and broadcast octets in a particular interval in the past 24 hours.ro HCPerfIntervalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.3.2.1.20 |
rprSpanIntervalInMcastClassCFramesThe number of received (PHY to MAC) classC multicast and broadcast frames in a particular interval in the past 24 hours.ro HCPerfIntervalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.3.2.1.21 |
rprSpanIntervalInMcastClassCOctetsThe number of received (PHY to MAC) classC multicast and broadcast octets in a particular interval in the past 24 hours.ro HCPerfIntervalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.3.2.1.22 |
rprSpanIntervalOutUcastClassAFramesThe number of transmitted (MAC to PHY) classA unicast frames in a particular interval in the past 24 hours.ro HCPerfIntervalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.3.2.1.23 |
rprSpanIntervalOutUcastClassAOctetsThe number of transmitted (MAC to PHY) classA unicast octets in a particular interval in the past 24 hours.ro HCPerfIntervalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.3.2.1.24 |
rprSpanIntervalOutUcastClassBCirFramesThe number of transmitted (MAC to PHY) classB CIR unicast frames, in a particular interval in the past 24 hours.ro HCPerfIntervalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.3.2.1.25 |
rprSpanIntervalOutUcastClassBCirOctetsThe number of transmitted (MAC to PHY) classB CIR unicast octets in a particular interval in the past 24 hours.ro HCPerfIntervalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.3.2.1.26 |
rprSpanIntervalOutUcastClassBEirFramesThe number of transmitted (MAC to PHY) classB EIR unicast frames in a particular interval in the past 24 hours.ro HCPerfIntervalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.3.2.1.27 |
rprSpanIntervalOutUcastClassBEirOctetsThe number of transmitted (MAC to PHY) classB EIR unicast octets in a particular interval in the past 24 hours.ro HCPerfIntervalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.3.2.1.28 |
rprSpanIntervalOutUcastClassCFramesThe number of transmitted (MAC to PHY) classC unicast frames in a particular interval in the past 24 hours.ro HCPerfIntervalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.3.2.1.29 |
rprSpanIntervalOutUcastClassCOctetsThe number of transmitted (MAC to PHY) classC unicast octets in a particular interval in the past 24 hours.ro HCPerfIntervalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.3.2.1.30 |
rprSpanIntervalOutMcastClassAFramesThe number of transmitted (MAC to PHY) classA multicast and broadcast frames in a particular interval in the past 24 hours.ro HCPerfIntervalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.3.2.1.31 |
rprSpanIntervalOutMcastClassAOctetsThe number of transmitted (MAC to PHY) classA multicast and broadcast octets in a particular interval in the past 24 hours.ro HCPerfIntervalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.3.2.1.32 |
rprSpanIntervalOutMcastClassBCirFramesThe number of transmitted (MAC to PHY) classB CIR multicast and broadcast frames in a particular interval in the past 24 hours.ro HCPerfIntervalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.3.2.1.33 |
rprSpanIntervalOutMcastClassBCirOctetsThe number of transmitted (MAC to PHY) classB CIR multicast and broadcast octets in a particular interval in the past 24 hours.ro HCPerfIntervalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.3.2.1.34 |
rprSpanIntervalOutMcastClassBEirFramesThe number of transmitted (MAC to PHY) classB EIR multicast and broadcast frames in a particular interval in the past 24 hours.ro HCPerfIntervalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.3.2.1.35 |
rprSpanIntervalOutMcastClassBEirOctetsThe number of transmitted (MAC to PHY) classB EIR multicast and broadcast octets in a particular interval in the past 24 hours.ro HCPerfIntervalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.3.2.1.36 |
rprSpanIntervalOutMcastClassCFramesThe number of transmitted (MAC to PHY) classC multicast and broadcast frames in a particular interval in the past 24 hours.ro HCPerfIntervalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.3.2.1.37 |
rprSpanIntervalOutMcastClassCOctetsThe number of transmitted (MAC to PHY) classC multicast and broadcast octets in a particular interval in the past 24 hours.ro HCPerfIntervalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.3.2.1.38 |
rprSpanCountersDayTableThe RPR Mac Span Day Table contains the cumulative sum of the various statistics for the 24 hour period preceding the current interval. All attributes in this table are volatile, i.e. will be cleared on system reset. SEQUENCE OF RprSpanCountersDayEntry .1.0.8802.17.1.1.1.3.3 |
rprSpanCountersDayEntryAn entry in the RPR Span Day table. RprSpanCountersDayEntry .1.0.8802.17.1.1.1.3.3.1 |
rprSpanDayIfIndexThe ifIndex of this RPR interface. InterfaceIndex (IF-MIB) .1.0.8802.17.1.1.1.3.3.1.1 |
rprSpanDaySpanAn indication of the span of the interface for which this row contains information. RprSpan .1.0.8802.17.1.1.1.3.3.1.2 |
rprSpanDayInUcastClassAFramesThe number of received (PHY to MAC) classA unicast frames.ro HCPerfTotalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.3.3.1.3 |
rprSpanDayInUcastClassAOctetsThe number of received (PHY to MAC) classA unicast octets.ro HCPerfTotalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.3.3.1.4 |
rprSpanDayInUcastClassBCirFramesThe number of received (PHY to MAC) classB CIR unicast frames.ro HCPerfTotalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.3.3.1.5 |
rprSpanDayInUcastClassBCirOctetsThe number of received (PHY to MAC) classB CIR unicast octets.ro HCPerfTotalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.3.3.1.6 |
rprSpanDayInUcastClassBEirFramesThe number of received (PHY to MAC) classB EIR unicast frames.ro HCPerfTotalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.3.3.1.7 |
rprSpanDayInUcastClassBEirOctetsThe number of received (PHY to MAC) classB EIR unicast octets.ro HCPerfTotalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.3.3.1.8 |
rprSpanDayInUcastClassCFramesThe number of received (PHY to MAC) classC unicast frames.ro HCPerfTotalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.3.3.1.9 |
rprSpanDayInUcastClassCOctetsThe number of received (PHY to MAC) classC unicast octets.ro HCPerfTotalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.3.3.1.10 |
rprSpanDayInMcastClassAFramesThe number of received (PHY to MAC) classA multicast and broadcast framesro HCPerfTotalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.3.3.1.11 |
rprSpanDayInMcastClassAOctetsThe number of received (PHY to MAC) classA multicast and broadcast octetsro HCPerfTotalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.3.3.1.12 |
rprSpanDayInMcastClassBCirFramesThe number of received (PHY to MAC) classB CIR multicast and broadcast framesro HCPerfTotalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.3.3.1.13 |
rprSpanDayInMcastClassBCirOctetsThe number of received (PHY to MAC) classB CIR multicast and broadcast octetsro HCPerfTotalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.3.3.1.14 |
rprSpanDayInMcastClassBEirFramesThe number of received (PHY to MAC) classB EIR multicast and broadcast framesro HCPerfTotalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.3.3.1.15 |
rprSpanDayInMcastClassBEirOctetsThe number of received (PHY to MAC) classB EIR multicast and broadcast octetsro HCPerfTotalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.3.3.1.16 |
rprSpanDayInMcastClassCFramesThe number of received (PHY to MAC) classC multicast and broadcast framesro HCPerfTotalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.3.3.1.17 |
rprSpanDayInMcastClassCOctetsThe number of received (PHY to MAC) classC multicast and broadcast octetsro HCPerfTotalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.3.3.1.18 |
rprSpanDayOutUcastClassAFramesThe number of transmitted (MAC to PHY) classA unicast frames.ro HCPerfTotalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.3.3.1.19 |
rprSpanDayOutUcastClassAOctetsThe number of transmitted (MAC to PHY) classA unicast octets.ro HCPerfTotalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.3.3.1.20 |
rprSpanDayOutUcastClassBCirFramesThe number of transmitted (MAC to PHY) classB CIR unicast frames.ro HCPerfTotalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.3.3.1.21 |
rprSpanDayOutUcastClassBCirOctetsThe number of transmitted (MAC to PHY) classB CIR unicast octets.ro HCPerfTotalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.3.3.1.22 |
rprSpanDayOutUcastClassBEirFramesThe number of transmitted (MAC to PHY) classB EIR unicast framesro HCPerfTotalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.3.3.1.23 |
rprSpanDayOutUcastClassBEirOctetsThe number of transmitted (MAC to PHY) classB EIR unicast octetsro HCPerfTotalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.3.3.1.24 |
rprSpanDayOutUcastClassCFramesThe number of transmitted (MAC to PHY) classC unicast framesro HCPerfTotalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.3.3.1.25 |
rprSpanDayOutUcastClassCOctetsThe number of transmitted (MAC to PHY) classC unicast octetsro HCPerfTotalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.3.3.1.26 |
rprSpanDayOutMcastClassAFramesThe number of transmitted (MAC to PHY) classA multicast and broadcast frames.ro HCPerfTotalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.3.3.1.27 |
rprSpanDayOutMcastClassAOctetsThe number of transmitted (MAC to PHY) classA multicast and broadcast octets.ro HCPerfTotalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.3.3.1.28 |
rprSpanDayOutMcastClassBCirFramesThe number of transmitted (MAC to PHY) classB CIR multicast and broadcast frames.ro HCPerfTotalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.3.3.1.29 |
rprSpanDayOutMcastClassBCirOctetsThe number of transmitted (MAC to PHY) classB CIR multicast and broadcast octets.ro HCPerfTotalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.3.3.1.30 |
rprSpanDayOutMcastClassBEirFramesThe number of transmitted (MAC to PHY) classB EIR multicast and broadcast frames.ro HCPerfTotalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.3.3.1.31 |
rprSpanDayOutMcastClassBEirOctetsThe number of transmitted (MAC to PHY) classB EIR multicast and broadcast octets.ro HCPerfTotalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.3.3.1.32 |
rprSpanDayOutMcastClassCFramesThe number of transmitted (MAC to PHY) classC multicast and broadcast frames.ro HCPerfTotalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.3.3.1.33 |
rprSpanDayOutMcastClassCOctetsThe number of transmitted (MAC to PHY) classC multicast and broadcast octets.ro HCPerfTotalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.3.3.1.34 |
rprSpanCountersStatsTableThe RPR Mac Span interface total counters table. The DiscontinuityTime for this table is indicated by ifCounterDiscontinuityTime defined in ifXTable. All attributes in this table are volatile, i.e. will be cleared on system reset. SEQUENCE OF RprSpanCountersStatsEntry .1.0.8802.17.1.1.1.3.4 |
rprSpanCountersStatsEntryAn entry in the span stats table. RprSpanCountersStatsEntry .1.0.8802.17.1.1.1.3.4.1 |
rprSpanStatsIfIndexThe ifIndex of this RPR interface. InterfaceIndex (IF-MIB) .1.0.8802.17.1.1.1.3.4.1.1 |
rprSpanStatsSpanAn indication of the span of the interface for which this row contains information. RprSpan .1.0.8802.17.1.1.1.3.4.1.2 |
rprSpanStatsInUcastClassAFramesThe number of received (PHY to MAC) classA unicast frames.ro Counter64 .1.0.8802.17.1.1.1.3.4.1.3 |
rprSpanStatsInUcastClassAOctetsThe number of received (PHY to MAC) classA unicast octets.ro Counter64 .1.0.8802.17.1.1.1.3.4.1.4 |
rprSpanStatsInUcastClassBCirFramesThe number of received (PHY to MAC) classB CIR unicast frames.ro Counter64 .1.0.8802.17.1.1.1.3.4.1.5 |
rprSpanStatsInUcastClassBCirOctetsThe number of received (PHY to MAC) classB CIR unicast octets.ro Counter64 .1.0.8802.17.1.1.1.3.4.1.6 |
rprSpanStatsInUcastClassBEirFramesThe number of received (PHY to MAC) classB EIR unicast frames.ro Counter64 .1.0.8802.17.1.1.1.3.4.1.7 |
rprSpanStatsInUcastClassBEirOctetsThe number of received (PHY to MAC) classB EIR unicast octets.ro Counter64 .1.0.8802.17.1.1.1.3.4.1.8 |
rprSpanStatsInUcastClassCFramesThe number of received (PHY to MAC) classC unicast frames.ro Counter64 .1.0.8802.17.1.1.1.3.4.1.9 |
rprSpanStatsInUcastClassCOctetsThe number of received (PHY to MAC) classC unicast octets.ro Counter64 .1.0.8802.17.1.1.1.3.4.1.10 |
rprSpanStatsInMcastClassAFramesThe number of received (PHY to MAC) classA multicast and broadcast framesro Counter64 .1.0.8802.17.1.1.1.3.4.1.11 |
rprSpanStatsInMcastClassAOctetsThe number of received (PHY to MAC) classA multicast and broadcast octetsro Counter64 .1.0.8802.17.1.1.1.3.4.1.12 |
rprSpanStatsInMcastClassBCirFramesThe number of received (PHY to MAC) classB CIR multicast and broadcast framesro Counter64 .1.0.8802.17.1.1.1.3.4.1.13 |
rprSpanStatsInMcastClassBCirOctetsThe number of received (PHY to MAC) classB CIR multicast and broadcast octetsro Counter64 .1.0.8802.17.1.1.1.3.4.1.14 |
rprSpanStatsInMcastClassBEirFramesThe number of received (PHY to MAC) classB EIR multicast and broadcast framesro Counter64 .1.0.8802.17.1.1.1.3.4.1.15 |
rprSpanStatsInMcastClassBEirOctetsThe number of received (PHY to MAC) classB EIR multicast and broadcast octetsro Counter64 .1.0.8802.17.1.1.1.3.4.1.16 |
rprSpanStatsInMcastClassCFramesThe number of received (PHY to MAC) classC multicast and broadcast framesro Counter64 .1.0.8802.17.1.1.1.3.4.1.17 |
rprSpanStatsInMcastClassCOctetsThe number of received (PHY to MAC) classC multicast and broadcast octetsro Counter64 .1.0.8802.17.1.1.1.3.4.1.18 |
rprSpanStatsInCtrlFramesThe number of received (PHY to MAC) control frames processed by this MAC. This does not include control frames in transit, i.e. a multicast control frame received from a ringlet will be counted as In but not Out. This does not include Fairness or idle frames.ro Counter64 .1.0.8802.17.1.1.1.3.4.1.19 |
rprSpanStatsInOamEchoFramesThe number of received (PHY to MAC) OAM echo frames processed by this MAC.ro Counter64 .1.0.8802.17.1.1.1.3.4.1.20 |
rprSpanStatsInOamFlushFramesThe number of received (PHY to MAC) OAM flush frames processed by this MAC.ro Counter64 .1.0.8802.17.1.1.1.3.4.1.21 |
rprSpanStatsInOamOrgFramesThe number of received (PHY to MAC) OAM Org frames processed by this MAC.ro Counter64 .1.0.8802.17.1.1.1.3.4.1.22 |
rprSpanStatsInTopoAtdFramesThe number of received (PHY to MAC) Topology ATD frames processed by this MAC.ro Counter64 .1.0.8802.17.1.1.1.3.4.1.23 |
rprSpanStatsInTopoChkSumFramesThe number of received (PHY to MAC) topology checksum frames processed by this MAC.ro Counter64 .1.0.8802.17.1.1.1.3.4.1.24 |
rprSpanStatsInTopoTpFramesThe number of received (PHY to MAC) topology TP frames processed by this MAC.ro Counter64 .1.0.8802.17.1.1.1.3.4.1.25 |
rprSpanStatsOutUcastClassAFramesThe number of transmitted (MAC to PHY) classA unicast frames.ro Counter64 .1.0.8802.17.1.1.1.3.4.1.26 |
rprSpanStatsOutUcastClassAOctetsThe number of transmitted (MAC to PHY) classA unicast octets.ro Counter64 .1.0.8802.17.1.1.1.3.4.1.27 |
rprSpanStatsOutUcastClassBCirFramesThe number of transmitted (MAC to PHY) classB CIR unicast frames.ro Counter64 .1.0.8802.17.1.1.1.3.4.1.28 |
rprSpanStatsOutUcastClassBCirOctetsThe number of transmitted (MAC to PHY) classB CIR unicast octets.ro Counter64 .1.0.8802.17.1.1.1.3.4.1.29 |
rprSpanStatsOutUcastClassBEirFramesThe number of transmitted (MAC to PHY) classB EIR unicast framesro Counter64 .1.0.8802.17.1.1.1.3.4.1.30 |
rprSpanStatsOutUcastClassBEirOctetsThe number of transmitted (MAC to PHY) classB EIR unicast octetsro Counter64 .1.0.8802.17.1.1.1.3.4.1.31 |
rprSpanStatsOutUcastClassCFramesThe number of transmitted (MAC to PHY) classC unicast framesro Counter64 .1.0.8802.17.1.1.1.3.4.1.32 |
rprSpanStatsOutUcastClassCOctetsThe number of transmitted (MAC to PHY) classC unicast octetsro Counter64 .1.0.8802.17.1.1.1.3.4.1.33 |
rprSpanStatsOutMcastClassAFramesThe number of transmitted (MAC to PHY) classA multicast and broadcast frames.ro Counter64 .1.0.8802.17.1.1.1.3.4.1.34 |
rprSpanStatsOutMcastClassAOctetsThe number of transmitted (MAC to PHY) classA multicast and broadcast octets.ro Counter64 .1.0.8802.17.1.1.1.3.4.1.35 |
rprSpanStatsOutMcastClassBCirFramesThe number of transmitted (MAC to PHY) classB CIR multicast and broadcast frames.ro Counter64 .1.0.8802.17.1.1.1.3.4.1.36 |
rprSpanStatsOutMcastClassBCirOctetsThe number of transmitted (MAC to PHY) classB CIR multicast and broadcast octets.ro Counter64 .1.0.8802.17.1.1.1.3.4.1.37 |
rprSpanStatsOutMcastClassBEirFramesThe number of transmitted (MAC to PHY) classB EIR multicast and broadcast frames.ro Counter64 .1.0.8802.17.1.1.1.3.4.1.38 |
rprSpanStatsOutMcastClassBEirOctetsThe number of transmitted (MAC to PHY) classB EIR multicast and broadcast octets.ro Counter64 .1.0.8802.17.1.1.1.3.4.1.39 |
rprSpanStatsOutMcastClassCFramesThe number of transmitted (MAC to PHY) classC multicast and broadcast frames.ro Counter64 .1.0.8802.17.1.1.1.3.4.1.40 |
rprSpanStatsOutMcastClassCOctetsThe number of transmitted (MAC to PHY) classC multicast and broadcast octets.ro Counter64 .1.0.8802.17.1.1.1.3.4.1.41 |
rprSpanStatsOutCtrlFramesThe number of transmitted (MAC to PHY) control frames generated by this MAC. This does not include control frames in transit, i.e. a multicast control frame received from a ringlet will be counted as In but not Out. This does not include Fairness or idle frames.ro Counter64 .1.0.8802.17.1.1.1.3.4.1.42 |
rprSpanStatsOutOamEchoFramesThe number of transmitted (MAC to PHY) OAM echo frames generated by this MAC.ro Counter64 .1.0.8802.17.1.1.1.3.4.1.43 |
rprSpanStatsOutOamFlushFramesThe number of transmitted (MAC to PHY) OAM flush frames generated by this MAC.ro Counter64 .1.0.8802.17.1.1.1.3.4.1.44 |
rprSpanStatsOutOamOrgFramesThe number of transmitted (MAC to PHY) OAM Org frames generated by this MAC.ro Counter64 .1.0.8802.17.1.1.1.3.4.1.45 |
rprSpanStatsOutTopoAtdFramesThe number of transmitted (MAC to PHY) topology ATD frames generated by this MAC.ro Counter64 .1.0.8802.17.1.1.1.3.4.1.46 |
rprSpanStatsOutTopoChkSumFramesThe number of transmitted (MAC to PHY) topology checksum frames generated by this MAC.ro Counter64 .1.0.8802.17.1.1.1.3.4.1.47 |
rprSpanStatsOutTopoTpFramesThe number of transmitted (MAC to PHY) topology TP frames generated by this MAC.ro Counter64 .1.0.8802.17.1.1.1.3.4.1.48 |
rprClientCounters OBJECT IDENTIFIER .1.0.8802.17.1.1.1.4 |
rprClientCountersCurrentTableThe local station traffic current counters table. All attributes in this table are volatile, i.e. will be cleared on system reset. SEQUENCE OF RprClientCountersCurrentEntry .1.0.8802.17.1.1.1.4.1 |
rprClientCountersCurrentEntryFrames and octets statistics for the current interval for the local station traffic of a particular RPR client interface. The corresponding instance of rprIfTimeElapsed indicates the number of seconds which have elapsed so far in the current interval. RprClientCountersCurrentEntry .1.0.8802.17.1.1.1.4.1.1 |
rprClientCurrentIfIndexThe ifIndex of this RPR interface. InterfaceIndex (IF-MIB) .1.0.8802.17.1.1.1.4.1.1.1 |
rprClientCurrentInUcastClassAFramesThe number of MAC to client classA unicast frames in the current interval.ro HCPerfCurrentCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.4.1.1.2 |
rprClientCurrentInUcastClassAOctetsThe number of MAC to client classA unicast octets in the current interval.ro HCPerfCurrentCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.4.1.1.3 |
rprClientCurrentInUcastClassBCirFramesThe number of MAC to client classB CIR unicast frames in the current interval.ro HCPerfCurrentCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.4.1.1.4 |
rprClientCurrentInUcastClassBCirOctetsThe number of MAC to client classB CIR unicast octets in the current interval.ro HCPerfCurrentCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.4.1.1.5 |
rprClientCurrentInUcastClassBEirFramesThe number of MAC to client classB EIR unicast frames in the current interval.ro HCPerfCurrentCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.4.1.1.6 |
rprClientCurrentInUcastClassBEirOctetsThe number of MAC to client classB EIR unicast octets in the current interval.ro HCPerfCurrentCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.4.1.1.7 |
rprClientCurrentInUcastClassCFramesThe number of MAC to client classC unicast frames in the current interval.ro HCPerfCurrentCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.4.1.1.8 |
rprClientCurrentInUcastClassCOctetsThe number of MAC to client classC unicast octets in the current interval.ro HCPerfCurrentCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.4.1.1.9 |
rprClientCurrentInMcastClassAFramesThe number of MAC to client classA multicast and broadcast frames in the current interval.ro HCPerfCurrentCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.4.1.1.10 |
rprClientCurrentInMcastClassAOctetsThe number of MAC to client classA multicast and broadcast octets in the current interval.ro HCPerfCurrentCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.4.1.1.11 |
rprClientCurrentInMcastClassBCirFramesThe number of MAC to client classB CIR multicast and broadcast frames in the current interval.ro HCPerfCurrentCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.4.1.1.12 |
rprClientCurrentInMcastClassBCirOctetsThe number of MAC to client classB CIR multicast and broadcast octets in the current interval.ro HCPerfCurrentCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.4.1.1.13 |
rprClientCurrentInMcastClassBEirFramesThe number of MAC to client classB EIR multicast and broadcast frames in the current interval.ro HCPerfCurrentCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.4.1.1.14 |
rprClientCurrentInMcastClassBEirOctetsThe number of MAC to client classB EIR multicast and broadcast octets in the current interval.ro HCPerfCurrentCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.4.1.1.15 |
rprClientCurrentInMcastClassCFramesThe number of MAC to client classC multicast and broadcast frames in the current interval.ro HCPerfCurrentCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.4.1.1.16 |
rprClientCurrentInMcastClassCOctetsThe number of MAC to client classC multicast and broadcast octets in the current interval.ro HCPerfCurrentCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.4.1.1.17 |
rprClientCurrentOutUcastClassAFramesThe number of client to MAC classA unicast frames in the current interval.ro HCPerfCurrentCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.4.1.1.18 |
rprClientCurrentOutUcastClassAOctetsThe number of client to MAC classA unicast octets in the current interval.ro HCPerfCurrentCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.4.1.1.19 |
rprClientCurrentOutUcastClassBCirFramesThe number of client to MAC classB CIR unicast frames in the current interval.ro HCPerfCurrentCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.4.1.1.20 |
rprClientCurrentOutUcastClassBCirOctetsThe number of client to MAC classB CIR unicast octets in the current interval.ro HCPerfCurrentCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.4.1.1.21 |
rprClientCurrentOutUcastClassBEirFramesThe number of client to MAC classB EIR unicast frames in the current interval.ro HCPerfCurrentCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.4.1.1.22 |
rprClientCurrentOutUcastClassBEirOctetsThe number of client to MAC classB EIR unicast octets in the current interval.ro HCPerfCurrentCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.4.1.1.23 |
rprClientCurrentOutUcastClassCFramesThe number of client to MAC classC unicast frames in the current interval.ro HCPerfCurrentCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.4.1.1.24 |
rprClientCurrentOutUcastClassCOctetsThe number of client to MAC classC unicast octets in the current interval.ro HCPerfCurrentCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.4.1.1.25 |
rprClientCurrentOutMcastClassAFramesThe number of client to MAC classA multicast and broadcast frames in the current interval.ro HCPerfCurrentCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.4.1.1.26 |
rprClientCurrentOutMcastClassAOctetsThe number of client to MAC classA multicast and broadcast octets in the current interval.ro HCPerfCurrentCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.4.1.1.27 |
rprClientCurrentOutMcastClassBCirFramesThe number of client to MAC classB CIR multicast and broadcast frames in the current interval.ro HCPerfCurrentCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.4.1.1.28 |
rprClientCurrentOutMcastClassBCirOctetsThe number of client to MAC classB CIR multicast and broadcast octets in the current interval.ro HCPerfCurrentCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.4.1.1.29 |
rprClientCurrentOutMcastClassBEirFramesThe number of client to MAC classB EIR multicast and broadcast frames in the current interval.ro HCPerfCurrentCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.4.1.1.30 |
rprClientCurrentOutMcastClassBEirOctetsThe number of client to MAC classB EIR multicast and broadcast octets in the current interval.ro HCPerfCurrentCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.4.1.1.31 |
rprClientCurrentOutMcastClassCFramesThe number of client to MAC classC multicast and broadcast frames in the current interval.ro HCPerfCurrentCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.4.1.1.32 |
rprClientCurrentOutMcastClassCOctetsThe number of client to MAC classC multicast and broadcast octets in the current interval.ro HCPerfCurrentCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.4.1.1.33 |
rprClientCountersIntervalTableThe local station traffic interval counters table. All attributes in this table are volatile, i.e. will be cleared on system reset. SEQUENCE OF RprClientCountersIntervalEntry .1.0.8802.17.1.1.1.4.2 |
rprClientCountersIntervalEntryFrames and octets statistics collected for a particular interval for local station traffic of a particular RPR interface. The corresponding instance of rprIfValidIntervals indicates the number of intervals for which the set of statistics is available. RprClientCountersIntervalEntry .1.0.8802.17.1.1.1.4.2.1 |
rprClientIntervalIfIndexThe ifIndex of this RPR interface. InterfaceIndex (IF-MIB) .1.0.8802.17.1.1.1.4.2.1.1 |
rprClientIntervalNumberA number between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently completed 15 minute interval, and interval identified by N is the interval immediately preceding the one identified by N-1. Unsigned32 .1.0.8802.17.1.1.1.4.2.1.2 |
rprClientIntervalValidDataThis variable indicates if the data for this interval is valid. It will be valid if it contains data for 900 seconds plus or minus 10 seconds.ro TruthValue (SNMPv2-TC) .1.0.8802.17.1.1.1.4.2.1.3 |
rprClientIntervalTimeElapsedThe duration of a particular interval in seconds. If, for some reason, such as an adjustment in the system's time-of-day clock, the current interval exceeds the maximum value, the agent will return the maximum value.ro Unsigned32 .1.0.8802.17.1.1.1.4.2.1.4 |
rprClientIntervalInUcastClassAFramesThe number of MAC to client classA unicast frames in a particular interval in the past 24 hours.ro HCPerfIntervalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.4.2.1.5 |
rprClientIntervalInUcastClassAOctetsThe number of MAC to client classA unicast octets in a particular interval in the past 24 hours.ro HCPerfIntervalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.4.2.1.6 |
rprClientIntervalInUcastClassBCirFramesThe number of MAC to client classB CIR unicast frames in a particular interval in the past 24 hours.ro HCPerfIntervalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.4.2.1.7 |
rprClientIntervalInUcastClassBCirOctetsThe number of MAC to client classB CIR unicast octets in a particular interval in the past 24 hours.ro HCPerfIntervalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.4.2.1.8 |
rprClientIntervalInUcastClassBEirFramesThe number of MAC to client classB EIR unicast frames in a particular interval in the past 24 hours.ro HCPerfIntervalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.4.2.1.9 |
rprClientIntervalInUcastClassBEirOctetsThe number of MAC to client classB EIR unicast octets in a particular interval in the past 24 hours.ro HCPerfIntervalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.4.2.1.10 |
rprClientIntervalInUcastClassCFramesThe number of MAC to client classC unicast frames in a particular interval in the past 24 hours.ro HCPerfIntervalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.4.2.1.11 |
rprClientIntervalInUcastClassCOctetsThe number of MAC to client classC unicast octets in a particular interval in the past 24 hours.ro HCPerfIntervalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.4.2.1.12 |
rprClientIntervalInMcastClassAFramesThe number of MAC to client classA multicast and broadcast frames in a particular interval in the past 24 hours.ro HCPerfIntervalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.4.2.1.13 |
rprClientIntervalInMcastClassAOctetsThe number of MAC to client classA multicast and broadcast octets in a particular interval in the past 24 hours.ro HCPerfIntervalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.4.2.1.14 |
rprClientIntervalInMcastClassBCirFramesThe number of MAC to client classB CIR multicast and broadcast frames in a particular interval in the past 24 hours.ro HCPerfIntervalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.4.2.1.15 |
rprClientIntervalInMcastClassBCirOctetsThe number of MAC to client classB CIR multicast and broadcast octets in a particular interval in the past 24 hours.ro HCPerfIntervalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.4.2.1.16 |
rprClientIntervalInMcastClassBEirFramesThe number of MAC to client classB EIR multicast and broadcast frames in a particular interval in the past 24 hours.ro HCPerfIntervalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.4.2.1.17 |
rprClientIntervalInMcastClassBEirOctetsThe number of MAC to client classB EIR multicast and broadcast octets in a particular interval in the past 24 hours.ro HCPerfIntervalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.4.2.1.18 |
rprClientIntervalInMcastClassCFramesThe number of MAC to client classC multicast and broadcast frames in a particular interval in the past 24 hours.ro HCPerfIntervalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.4.2.1.19 |
rprClientIntervalInMcastClassCOctetsThe number of MAC to client classC multicast and broadcast octets in a particular interval in the past 24 hours.ro HCPerfIntervalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.4.2.1.20 |
rprClientIntervalOutUcastClassAFramesThe number of client to MAC classA unicast frames in a particular interval in the past 24 hours.ro HCPerfIntervalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.4.2.1.21 |
rprClientIntervalOutUcastClassAOctetsThe number of client to MAC classA unicast octets in a particular interval in the past 24 hours.ro HCPerfIntervalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.4.2.1.22 |
rprClientIntervalOutUcastClassBCirFramesThe number of client to MAC classB CIR unicast frames in a particular interval in the past 24 hours.ro HCPerfIntervalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.4.2.1.23 |
rprClientIntervalOutUcastClassBCirOctetsThe number of client to MAC classB CIR unicast octets in a particular interval in the past 24 hours.ro HCPerfIntervalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.4.2.1.24 |
rprClientIntervalOutUcastClassBEirFramesThe number of client to MAC classB EIR unicast frames in a particular interval in the past 24 hours.ro HCPerfIntervalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.4.2.1.25 |
rprClientIntervalOutUcastClassBEirOctetsThe number of client to MAC classB EIR unicast octets in a particular interval in the past 24 hours.ro HCPerfIntervalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.4.2.1.26 |
rprClientIntervalOutUcastClassCFramesThe number of client to MAC classC unicast frames in a particular interval in the past 24 hours.ro HCPerfIntervalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.4.2.1.27 |
rprClientIntervalOutUcastClassCOctetsThe number of client to MAC classC unicast octets in a particular interval in the past 24 hours.ro HCPerfIntervalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.4.2.1.28 |
rprClientIntervalOutMcastClassAFramesThe number of client to MAC classA multicast and broadcast frames in a particular interval in the past 24 hours.ro HCPerfIntervalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.4.2.1.29 |
rprClientIntervalOutMcastClassAOctetsThe number of client to MAC classA multicast and broadcast octets in a particular interval in the past 24 hours.ro HCPerfIntervalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.4.2.1.30 |
rprClientIntervalOutMcastClassBCirFramesThe number of client to MAC classB CIR multicast and broadcast frames in a particular interval in the past 24 hours.ro HCPerfIntervalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.4.2.1.31 |
rprClientIntervalOutMcastClassBCirOctetsThe number of client to MAC classB CIR multicast and broadcast octets in a particular interval in the past 24 hours.ro HCPerfIntervalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.4.2.1.32 |
rprClientIntervalOutMcastClassBEirFramesThe number of client to MAC classB EIR multicast and broadcast frames in a particular interval in the past 24 hours.ro HCPerfIntervalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.4.2.1.33 |
rprClientIntervalOutMcastClassBEirOctetsThe number of client to MAC classB EIR multicast and broadcast octets in a particular interval in the past 24 hours.ro HCPerfIntervalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.4.2.1.34 |
rprClientIntervalOutMcastClassCFramesThe number of client to MAC classC multicast and broadcast frames in a particular interval in the past 24 hours.ro HCPerfIntervalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.4.2.1.35 |
rprClientIntervalOutMcastClassCOctetsThe number of client to MAC classC multicast and broadcast octets in a particular interval in the past 24 hours.ro HCPerfIntervalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.4.2.1.36 |
rprClientCountersDayTableThe RPR Mac Client Day Table contains the cumulative sum of the various statistics for the 24 hour period preceding the current interval. All attributes in this table are volatile, i.e. will be cleared on system reset. SEQUENCE OF RprClientCountersDayEntry .1.0.8802.17.1.1.1.4.3 |
rprClientCountersDayEntryAn entry in the RPR Client Day table. RprClientCountersDayEntry .1.0.8802.17.1.1.1.4.3.1 |
rprClientDayIfIndexThe ifIndex of this RPR interface. InterfaceIndex (IF-MIB) .1.0.8802.17.1.1.1.4.3.1.1 |
rprClientDayInUcastClassAFramesThe number of MAC to client classA unicast frames.ro HCPerfTotalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.4.3.1.2 |
rprClientDayInUcastClassAOctetsThe number of MAC to client classA unicast octets.ro HCPerfTotalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.4.3.1.3 |
rprClientDayInUcastClassBCirFramesThe number of MAC to client classB CIR unicast frames.ro HCPerfTotalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.4.3.1.4 |
rprClientDayInUcastClassBCirOctetsThe number of MAC to client classB CIR unicast octets.ro HCPerfTotalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.4.3.1.5 |
rprClientDayInUcastClassBEirFramesThe number of MAC to client classB EIR unicast frames.ro HCPerfTotalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.4.3.1.6 |
rprClientDayInUcastClassBEirOctetsThe number of MAC to client classB EIR unicast octets.ro HCPerfTotalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.4.3.1.7 |
rprClientDayInUcastClassCFramesThe number of MAC to client classC unicast frames.ro HCPerfTotalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.4.3.1.8 |
rprClientDayInUcastClassCOctetsThe number of MAC to client classC unicast octets.ro HCPerfTotalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.4.3.1.9 |
rprClientDayInMcastClassAFramesThe number of MAC to client classA multicast and broadcast framesro HCPerfTotalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.4.3.1.10 |
rprClientDayInMcastClassAOctetsThe number of MAC to client classA multicast and broadcast octetsro HCPerfTotalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.4.3.1.11 |
rprClientDayInMcastClassBCirFramesThe number of MAC to client classB CIR multicast and broadcast framesro HCPerfTotalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.4.3.1.12 |
rprClientDayInMcastClassBCirOctetsThe number of MAC to client classB CIR multicast and broadcast octetsro HCPerfTotalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.4.3.1.13 |
rprClientDayInMcastClassBEirFramesThe number of MAC to client classB EIR multicast and broadcast framesro HCPerfTotalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.4.3.1.14 |
rprClientDayInMcastClassBEirOctetsThe number of MAC to client classB EIR multicast and broadcast octetsro HCPerfTotalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.4.3.1.15 |
rprClientDayInMcastClassCFramesThe number of MAC to client classC multicast and broadcast framesro HCPerfTotalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.4.3.1.16 |
rprClientDayInMcastClassCOctetsThe number of MAC to client classC multicast and broadcast octetsro HCPerfTotalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.4.3.1.17 |
rprClientDayOutUcastClassAFramesThe number of client to MAC classA unicast frames.ro HCPerfTotalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.4.3.1.18 |
rprClientDayOutUcastClassAOctetsThe number of client to MAC classA unicast octets.ro HCPerfTotalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.4.3.1.19 |
rprClientDayOutUcastClassBCirFramesThe number of client to MAC classB CIR unicast frames.ro HCPerfTotalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.4.3.1.20 |
rprClientDayOutUcastClassBCirOctetsThe number of client to MAC classB CIR unicast octets.ro HCPerfTotalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.4.3.1.21 |
rprClientDayOutUcastClassBEirFramesThe number of client to MAC classB EIR unicast framesro HCPerfTotalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.4.3.1.22 |
rprClientDayOutUcastClassBEirOctetsThe number of client to MAC classB EIR unicast octetsro HCPerfTotalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.4.3.1.23 |
rprClientDayOutUcastClassCFramesThe number of client to MAC classC unicast framesro HCPerfTotalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.4.3.1.24 |
rprClientDayOutUcastClassCOctetsThe number of client to MAC classC unicast octetsro HCPerfTotalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.4.3.1.25 |
rprClientDayOutMcastClassAFramesThe number of client to MAC classA multicast and broadcast frames.ro HCPerfTotalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.4.3.1.26 |
rprClientDayOutMcastClassAOctetsThe number of client to MAC classA multicast and broadcast octets.ro HCPerfTotalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.4.3.1.27 |
rprClientDayOutMcastClassBCirFramesThe number of client to MAC classB CIR multicast and broadcast frames.ro HCPerfTotalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.4.3.1.28 |
rprClientDayOutMcastClassBCirOctetsThe number of client to MAC classB CIR multicast and broadcast octets.ro HCPerfTotalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.4.3.1.29 |
rprClientDayOutMcastClassBEirFramesThe number of client to MAC classB EIR multicast and broadcast frames.ro HCPerfTotalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.4.3.1.30 |
rprClientDayOutMcastClassBEirOctetsThe number of client to MAC classB EIR multicast and broadcast octets.ro HCPerfTotalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.4.3.1.31 |
rprClientDayOutMcastClassCFramesThe number of client to MAC classC multicast and broadcast frames.ro HCPerfTotalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.4.3.1.32 |
rprClientDayOutMcastClassCOctetsThe number of client to MAC classC multicast and broadcast octets.ro HCPerfTotalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.4.3.1.33 |
rprClientCountersStatsTableThe local station traffic total counters table. The DiscontinuityTime for this table is indicated by ifCounterDiscontinuityTime defined in ifXTable. All attributes in this table are volatile, i.e. will be cleared on system reset. SEQUENCE OF RprClientCountersStatsEntry .1.0.8802.17.1.1.1.4.4 |
rprClientCountersStatsEntryAn entry in the span stats table. RprClientCountersStatsEntry .1.0.8802.17.1.1.1.4.4.1 |
rprClientStatsIfIndexThe ifIndex of this RPR interface. InterfaceIndex (IF-MIB) .1.0.8802.17.1.1.1.4.4.1.1 |
rprClientStatsInUcastClassAFramesThe number of MAC to client classA unicast frames.ro Counter64 .1.0.8802.17.1.1.1.4.4.1.2 |
rprClientStatsInUcastClassAOctetsThe number of MAC to client classA unicast octets.ro Counter64 .1.0.8802.17.1.1.1.4.4.1.3 |
rprClientStatsInUcastClassBCirFramesThe number of MAC to client classB CIR unicast frames.ro Counter64 .1.0.8802.17.1.1.1.4.4.1.4 |
rprClientStatsInUcastClassBCirOctetsThe number of MAC to client classB CIR unicast octets.ro Counter64 .1.0.8802.17.1.1.1.4.4.1.5 |
rprClientStatsInUcastClassBEirFramesThe number of MAC to client classB EIR unicast frames.ro Counter64 .1.0.8802.17.1.1.1.4.4.1.6 |
rprClientStatsInUcastClassBEirOctetsThe number of MAC to client classB EIR unicast octets.ro Counter64 .1.0.8802.17.1.1.1.4.4.1.7 |
rprClientStatsInUcastClassCFramesThe number of MAC to client classC unicast frames.ro Counter64 .1.0.8802.17.1.1.1.4.4.1.8 |
rprClientStatsInUcastClassCOctetsThe number of MAC to client classC unicast octets.ro Counter64 .1.0.8802.17.1.1.1.4.4.1.9 |
rprClientStatsInMcastClassAFramesThe number of MAC to client classA multicast and broadcast framesro Counter64 .1.0.8802.17.1.1.1.4.4.1.10 |
rprClientStatsInMcastClassAOctetsThe number of MAC to client classA multicast and broadcast octetsro Counter64 .1.0.8802.17.1.1.1.4.4.1.11 |
rprClientStatsInMcastClassBCirFramesThe number of MAC to client classB CIR multicast and broadcast framesro Counter64 .1.0.8802.17.1.1.1.4.4.1.12 |
rprClientStatsInMcastClassBCirOctetsThe number of MAC to client classB CIR multicast and broadcast octetsro Counter64 .1.0.8802.17.1.1.1.4.4.1.13 |
rprClientStatsInMcastClassBEirFramesThe number of MAC to client classB EIR multicast and broadcast framesro Counter64 .1.0.8802.17.1.1.1.4.4.1.14 |
rprClientStatsInMcastClassBEirOctetsThe number of MAC to client classB EIR multicast and broadcast octetsro Counter64 .1.0.8802.17.1.1.1.4.4.1.15 |
rprClientStatsInMcastClassCFramesThe number of MAC to client classC multicast and broadcast framesro Counter64 .1.0.8802.17.1.1.1.4.4.1.16 |
rprClientStatsInMcastClassCOctetsThe number of MAC to client classC multicast and broadcast octetsro Counter64 .1.0.8802.17.1.1.1.4.4.1.17 |
rprClientStatsInBcastFramesThe number of MAC to client broadcast frames. This is used only when deriving the multicast and broadcast packet counters for the interface MIB.ro Counter64 .1.0.8802.17.1.1.1.4.4.1.18 |
rprClientStatsOutUcastClassAFramesThe number of client to MAC classA unicast frames.ro Counter64 .1.0.8802.17.1.1.1.4.4.1.19 |
rprClientStatsOutUcastClassAOctetsThe number of client to MAC classA unicast octets.ro Counter64 .1.0.8802.17.1.1.1.4.4.1.20 |
rprClientStatsOutUcastClassBCirFramesThe number of client to MAC classB CIR unicast frames.ro Counter64 .1.0.8802.17.1.1.1.4.4.1.21 |
rprClientStatsOutUcastClassBCirOctetsThe number of client to MAC classB CIR unicast octets.ro Counter64 .1.0.8802.17.1.1.1.4.4.1.22 |
rprClientStatsOutUcastClassBEirFramesThe number of client to MAC classB EIR unicast framesro Counter64 .1.0.8802.17.1.1.1.4.4.1.23 |
rprClientStatsOutUcastClassBEirOctetsThe number of client to MAC classB EIR unicast octetsro Counter64 .1.0.8802.17.1.1.1.4.4.1.24 |
rprClientStatsOutUcastClassCFramesThe number of client to MAC classC unicast framesro Counter64 .1.0.8802.17.1.1.1.4.4.1.25 |
rprClientStatsOutUcastClassCOctetsThe number of client to MAC classC unicast octetsro Counter64 .1.0.8802.17.1.1.1.4.4.1.26 |
rprClientStatsOutMcastClassAFramesThe number of client to MAC classA multicast and broadcast frames.ro Counter64 .1.0.8802.17.1.1.1.4.4.1.27 |
rprClientStatsOutMcastClassAOctetsThe number of client to MAC classA multicast and broadcast octets.ro Counter64 .1.0.8802.17.1.1.1.4.4.1.28 |
rprClientStatsOutMcastClassBCirFramesThe number of client to MAC classB CIR multicast and broadcast frames.ro Counter64 .1.0.8802.17.1.1.1.4.4.1.29 |
rprClientStatsOutMcastClassBCirOctetsThe number of client to MAC classB CIR multicast and broadcast octets.ro Counter64 .1.0.8802.17.1.1.1.4.4.1.30 |
rprClientStatsOutMcastClassBEirFramesThe number of client to MAC classB EIR multicast and broadcast frames.ro Counter64 .1.0.8802.17.1.1.1.4.4.1.31 |
rprClientStatsOutMcastClassBEirOctetsThe number of client to MAC classB EIR multicast and broadcast octets.ro Counter64 .1.0.8802.17.1.1.1.4.4.1.32 |
rprClientStatsOutMcastClassCFramesThe number of client to MAC classC multicast and broadcast frames.ro Counter64 .1.0.8802.17.1.1.1.4.4.1.33 |
rprClientStatsOutMcastClassCOctetsThe number of client to MAC classC multicast and broadcast octets.ro Counter64 .1.0.8802.17.1.1.1.4.4.1.34 |
rprClientStatsOutBcastFramesThe number of client to MAC broadcast frames. This is used only when deriving the multicast and broadcast packet counters for the interface MIB.ro Counter64 .1.0.8802.17.1.1.1.4.4.1.35 |
rprSpanErrorCounters OBJECT IDENTIFIER .1.0.8802.17.1.1.1.5 |
rprSpanErrorCountersCurrentTableThe RPR Errors Current counters table. All attributes in this table are volatile, i.e. will be cleared on system reset. SEQUENCE OF RprSpanErrorCountersCurrentEntry .1.0.8802.17.1.1.1.5.1 |
rprSpanErrorCountersCurrentEntryErrors statistics for the current interval of a particular span of a particular RPR interface. The corresponding instance of rprIfTimeElapsed indicates the number of seconds which have elapsed so far in the current interval. RprSpanErrorCountersCurrentEntry .1.0.8802.17.1.1.1.5.1.1 |
rprSpanErrorCurrentIfIndexThe ifIndex of this RPR interface. InterfaceIndex (IF-MIB) .1.0.8802.17.1.1.1.5.1.1.1 |
rprSpanErrorCurrentSpanAn indication of the span of the interface for which this row contains information. RprSpan .1.0.8802.17.1.1.1.5.1.1.2 |
rprSpanErrorCurrentTtlExpFramesThe number of received (PHY to MAC) data frames that were dropped due to zero Time To Live (TTL).ro HCPerfCurrentCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.5.1.1.3 |
rprSpanErrorCurrentTooLongFramesThe number of received (PHY to MAC) frames that exceed the maximum permitted frame size.ro HCPerfCurrentCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.5.1.1.4 |
rprSpanErrorCurrentTooShortFramesThe number of received (PHY to MAC) frames shortest than the minimum permitted frame size.ro HCPerfCurrentCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.5.1.1.5 |
rprSpanErrorCurrentBadHecFramesThe number of received (PHY to MAC) frames with HEC error.ro HCPerfCurrentCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.5.1.1.6 |
rprSpanErrorCurrentBadFcsFramesThe number of received (PHY to MAC) data and control frames where the fcs value did not match the expected fcs value. This includes data frames passed to the client as a result of rprIfMacOperModes being not set to dropBadFcs.ro HCPerfCurrentCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.5.1.1.7 |
rprSpanErrorCurrentSelfSrcUcastFramesThe number of received (PHY to MAC) unicast frames that were transmitted by the station itself i.e. the source MAC is equal to the interface MAC.ro HCPerfCurrentCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.5.1.1.8 |
rprSpanErrorCurrentPmdAbortFramesThe number of received (PHY to MAC) frames that were aborted by the PMD.ro HCPerfCurrentCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.5.1.1.9 |
rprSpanErrorCurrentBadAddrFramesThe number of received (PHY to MAC) frames with invalid SA value.ro HCPerfCurrentCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.5.1.1.10 |
rprSpanErrorCurrentBadParityFramesThe number of received (PHY to MAC) frames parity value not matching the expected parity valuero HCPerfCurrentCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.5.1.1.11 |
rprSpanErrorCurrentContainedFramesThe number of received (PHY to MAC) frames that were removed due to context containmentro HCPerfCurrentCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.5.1.1.12 |
rprSpanErrorCurrentScffErrorsThe number of received (PHY to MAC) errored SCFF, with bad parity, bad FCS, or both.ro HCPerfCurrentCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.5.1.1.13 |
rprSpanErrorCurrentErroredSecondsThe number of errored seconds.ro HCPerfCurrentCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.5.1.1.14 |
rprSpanErrorCurrentSeverelyErroredSecondsThe number of severely errored seconds.ro HCPerfCurrentCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.5.1.1.15 |
rprSpanErrorCurrentUnavailableSecondsThe number of unavailable seconds.ro HCPerfCurrentCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.5.1.1.16 |
rprSpanErrorCountersIntervalTableThe RPR Errors Interval counters table. All attributes in this table are volatile, i.e. will be cleared on system reset. SEQUENCE OF RprSpanErrorCountersIntervalEntry .1.0.8802.17.1.1.1.5.2 |
rprSpanErrorCountersIntervalEntryError statistics collected for a particular interval of a particular span of a particular RPR interface. The corresponding instance of rprIfValidIntervals indicates the number of intervals for which the set of statistics is available. RprSpanErrorCountersIntervalEntry .1.0.8802.17.1.1.1.5.2.1 |
rprSpanErrorIntervalIfIndexThe ifIndex of this RPR interface. InterfaceIndex (IF-MIB) .1.0.8802.17.1.1.1.5.2.1.1 |
rprSpanErrorIntervalSpanAn indication of the span of the interface for which this row contains information. RprSpan .1.0.8802.17.1.1.1.5.2.1.2 |
rprSpanErrorIntervalNumberA number between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently completed 15 minute interval, and interval identified by N is the interval immediately preceding the one identified by N-1. Unsigned32 .1.0.8802.17.1.1.1.5.2.1.3 |
rprSpanErrorIntervalValidDataThis variable indicates if the data for this interval is valid. It will be valid if it contains data for 900 seconds plus or minus 10 seconds.ro TruthValue (SNMPv2-TC) .1.0.8802.17.1.1.1.5.2.1.4 |
rprSpanErrorIntervalTimeElapsedThe duration of a particular interval in seconds. If, for some reason, such as an adjustment in the system's time-of-day clock, the current interval exceeds the maximum value, the agent will return the maximum value.ro Unsigned32 .1.0.8802.17.1.1.1.5.2.1.5 |
rprSpanErrorIntervalTtlExpFramesThe number of received (PHY to MAC) frames that were dropped due to zero Time To Live (TTL) in a particular interval in the past 24 hoursro HCPerfIntervalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.5.2.1.6 |
rprSpanErrorIntervalTooLongFramesThe number of received (PHY to MAC) frames that exceed the maximum permitted frame size in a particular interval in the past 24 hoursro HCPerfIntervalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.5.2.1.7 |
rprSpanErrorIntervalTooShortFramesThe number of received (PHY to MAC) frames shortest than the minimum permitted frame size in a particular interval in the past 24 hours.ro HCPerfIntervalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.5.2.1.8 |
rprSpanErrorIntervalBadHecFramesThe number of received (PHY to MAC) frames with HEC error in a particular interval in the past 24 hoursro HCPerfIntervalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.5.2.1.9 |
rprSpanErrorIntervalBadFcsFramesThe number of received (PHY to MAC) data and control frames where the fcs value did not match the expected fcs value. This includes data frames passed to the client as a result of rprIfMacOperModes being not set to dropBadFcs.ro HCPerfIntervalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.5.2.1.10 |
rprSpanErrorIntervalSelfSrcUcastFramesThe number of received (PHY to MAC) unicast frames that were transmitted by the station itself i.e. the source MAC is equal to the interface MAC, in a particular interval in the past 24 hoursro HCPerfIntervalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.5.2.1.11 |
rprSpanErrorIntervalPmdAbortFramesThe number of received (PHY to MAC) unicast frames that were aborted by the PMD layer, in a particular interval in the past 24 hoursro HCPerfIntervalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.5.2.1.12 |
rprSpanErrorIntervalBadAddrFramesThe number of received (PHY to MAC) frames with invalid SA value.ro HCPerfIntervalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.5.2.1.13 |
rprSpanErrorIntervalBadParityFramesThe number of received (PHY to MAC) frames parity value not matching the expected parity valuero HCPerfIntervalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.5.2.1.14 |
rprSpanErrorIntervalContainedFramesThe number of received (PHY to MAC) frames that were removed due to context containmentro HCPerfIntervalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.5.2.1.15 |
rprSpanErrorIntervalScffErrorsThe number of received (PHY to MAC) errored SCFF, with bad parity, bad FCS, or both.ro HCPerfIntervalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.5.2.1.16 |
rprSpanErrorIntervalErroredSecondsThe number of errored seconds.ro HCPerfIntervalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.5.2.1.17 |
rprSpanErrorIntervalSeverelyErroredSecondsThe number of severely errored seconds.ro HCPerfIntervalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.5.2.1.18 |
rprSpanErrorIntervalUnavailableSecondsThe number of unavailable seconds.ro HCPerfIntervalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.5.2.1.19 |
rprSpanErrorCountersDayTableThe RPR Mac Error Day Table contains the cumulative sum of the various statistics for the 24 hour period preceding the current interval. All attributes in this table are volatile, i.e. will be cleared on system reset. SEQUENCE OF RprSpanErrorCountersDayEntry .1.0.8802.17.1.1.1.5.3 |
rprSpanErrorCountersDayEntryAn entry in the RPR Error Day table. RprSpanErrorCountersDayEntry .1.0.8802.17.1.1.1.5.3.1 |
rprSpanErrorDayIfIndexThe ifIndex of this RPR interface. InterfaceIndex (IF-MIB) .1.0.8802.17.1.1.1.5.3.1.1 |
rprSpanErrorDaySpanAn indication of the span of the interface for which this row contains information. RprSpan .1.0.8802.17.1.1.1.5.3.1.2 |
rprSpanErrorDayTtlExpFramesThe number of received (PHY to MAC) frames that were dropped due to zero Time To Live (TTL).ro HCPerfTotalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.5.3.1.3 |
rprSpanErrorDayTooLongFramesThe number of received (PHY to MAC) frames that exceed the maximum permitted frame size.ro HCPerfTotalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.5.3.1.4 |
rprSpanErrorDayTooShortFramesThe number of received (PHY to MAC) frames shortest than the minimum permitted frame size.ro HCPerfTotalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.5.3.1.5 |
rprSpanErrorDayBadHecFramesThe number of received (PHY to MAC) frames with HEC error.ro HCPerfTotalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.5.3.1.6 |
rprSpanErrorDayBadFcsFramesThe number of received (PHY to MAC) data and control frames where the fcs value did not match the expected fcs value. This includes data frames passed to the client as a result of rprIfMacOperModes being not set to dropBadFcs.ro HCPerfTotalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.5.3.1.7 |
rprSpanErrorDaySelfSrcUcastFramesThe number of received (PHY to MAC) unicast frames that were transmitted by the station itself i.e. the source MAC is equal to the interface MAC.ro HCPerfTotalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.5.3.1.8 |
rprSpanErrorDayPmdAbortFramesThe number of received (PHY to MAC) frames that were aborted by the PMDro HCPerfTotalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.5.3.1.9 |
rprSpanErrorDayBadAddrFramesThe number of received (PHY to MAC) frames with invalid SA value.ro HCPerfTotalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.5.3.1.10 |
rprSpanErrorDayBadParityFramesThe number of received (PHY to MAC) frames parity value not matching the expected parity valuero HCPerfTotalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.5.3.1.11 |
rprSpanErrorDayContainedFramesThe number of received (PHY to MAC) frames that were removed due to context containmentro HCPerfTotalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.5.3.1.12 |
rprSpanErrorDayScffErrorsThe number of received (PHY to MAC) errored SCFF, with bad parity, bad FCS, or both.ro HCPerfTotalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.5.3.1.13 |
rprSpanErrorDayErroredSecondsThe number of errored seconds.ro HCPerfTotalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.5.3.1.14 |
rprSpanErrorDaySeverelyErroredSecondsThe number of severely errored seconds.ro HCPerfTotalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.5.3.1.15 |
rprSpanErrorDayUnavailableSecondsThe number of unavailable seconds.ro HCPerfTotalCount (HC-PerfHist-TC-MIB) .1.0.8802.17.1.1.1.5.3.1.16 |
rprSpanErrorCountersStatsTableThe RPR Errors total counters table. The DiscontinuityTime for this table is indicated by ifCounterDiscontinuityTime defined in ifXTable. All attributes in this table are volatile, i.e. will be cleared on system reset. SEQUENCE OF RprSpanErrorCountersStatsEntry .1.0.8802.17.1.1.1.5.4 |
rprSpanErrorCountersStatsEntryAn entry in the span error counter table. RprSpanErrorCountersStatsEntry .1.0.8802.17.1.1.1.5.4.1 |
rprSpanErrorStatsIfIndexThe ifIndex of this RPR interface. InterfaceIndex (IF-MIB) .1.0.8802.17.1.1.1.5.4.1.1 |
rprSpanErrorStatsSpanAn indication of the span of the interface for which this row contains information. RprSpan .1.0.8802.17.1.1.1.5.4.1.2 |
rprSpanErrorStatsTtlExpFramesThe number of received (PHY to MAC) frames that were dropped due to zero Time To Live (TTL).ro Counter64 .1.0.8802.17.1.1.1.5.4.1.3 |
rprSpanErrorStatsTooLongFramesThe number of received (PHY to MAC) frames that exceed the maximum permitted frame size.ro Counter64 .1.0.8802.17.1.1.1.5.4.1.4 |
rprSpanErrorStatsTooShortFramesThe number of received (PHY to MAC) frames shortest than the minimum permitted frame size.ro Counter64 .1.0.8802.17.1.1.1.5.4.1.5 |
rprSpanErrorStatsBadHecFramesThe number of received (PHY to MAC) frames with HEC error.ro Counter64 .1.0.8802.17.1.1.1.5.4.1.6 |
rprSpanErrorStatsBadFcsFramesThe number of received (PHY to MAC) data and control frames where the fcs value did not match the expected fcs value. This includes data frames passed to the client as a result of rprIfMacOperModes being not set to dropBadFcs.ro Counter64 .1.0.8802.17.1.1.1.5.4.1.7 |
rprSpanErrorStatsSelfSrcUcastFramesThe number of received (PHY to MAC) unicast frames that were transmitted by the station itself i.e. the source MAC is equal to the interface MAC.ro Counter64 .1.0.8802.17.1.1.1.5.4.1.8 |
rprSpanErrorStatsPmdAbortFramesThe number of received (PHY to MAC) frames that were aborted by the PMDro Counter64 .1.0.8802.17.1.1.1.5.4.1.9 |
rprSpanErrorStatsBadAddrFramesThe number of received (PHY to MAC) frames with invalid SA value.ro Counter64 .1.0.8802.17.1.1.1.5.4.1.10 |
rprSpanErrorStatsBadParityFramesThe number of received (PHY to MAC) frames parity value not matching the expected parity valuero Counter64 .1.0.8802.17.1.1.1.5.4.1.11 |
rprSpanErrorStatsContainedFramesThe number of received (PHY to MAC) frames that were removed due to context containmentro Counter64 .1.0.8802.17.1.1.1.5.4.1.12 |
rprSpanErrorStatsScffErrorsThe number of received (PHY to MAC) errored SCFF, with bad parity, bad FCS, or both.ro Counter64 .1.0.8802.17.1.1.1.5.4.1.13 |
rprConformance OBJECT IDENTIFIER .1.0.8802.17.1.1.2 |
rprGroups OBJECT IDENTIFIER .1.0.8802.17.1.1.2.1 |
rprIfGroupCollection of objects needed for RPR MAC configuration. Unknown .1.0.8802.17.1.1.2.1.1 |
rprIfGroupOptCollection of objects for RPR MAC. Unknown .1.0.8802.17.1.1.2.1.2 |
rprIfStatsControlGroupCollection of objects needed for RPR MAC statistics management. Unknown .1.0.8802.17.1.1.2.1.3 |
rprSpanGroupCollection of objects needed for RPR Span configuration. Unknown .1.0.8802.17.1.1.2.1.4 |
rprSpanGroupOptCollection of objects for RPR Span. Unknown .1.0.8802.17.1.1.2.1.5 |
rprSpanProtectionGroupCollection of objects needed for RPR Span Protection monitoring. Unknown .1.0.8802.17.1.1.2.1.6 |
rprTopoGroupCollection of objects needed for RPR Topology discovery. Unknown .1.0.8802.17.1.1.2.1.7 |
rprFairnessGroupCollection of objects needed for RPR Fairness configuration. Unknown .1.0.8802.17.1.1.2.1.8 |
rprFairnessGroupOptCollection of objects for RPR Fairness. Unknown .1.0.8802.17.1.1.2.1.9 |
rprOamGroupCollection of objects needed for RPR OAM configuration. Unknown .1.0.8802.17.1.1.2.1.10 |
rprIfChangeSummaryGroupCollection of objects summarizes changes on the RPR interfaces. Unknown .1.0.8802.17.1.1.2.1.11 |
rprSpanCurrentGroupCollection of objects counting MAC span current statistics. Unknown .1.0.8802.17.1.1.2.1.12 |
rprSpanIntervalGroupCollection of objects counting MAC span intervals statistics. Unknown .1.0.8802.17.1.1.2.1.13 |
rprSpanDayGroupCollection of objects counting MAC span 24 hours statistics. Unknown .1.0.8802.17.1.1.2.1.14 |
rprSpanStatsGroupCollection of objects counting MAC span total statistics. Unknown .1.0.8802.17.1.1.2.1.15 |
rprClientCurrentGroupCollection of objects counting MAC client interface current statistics. Unknown .1.0.8802.17.1.1.2.1.16 |
rprClientIntervalGroupCollection of objects counting MAC client interface intervals statistics. Unknown .1.0.8802.17.1.1.2.1.17 |
rprClientDayGroupCollection of objects counting MAC client interface 24 hours statistics. Unknown .1.0.8802.17.1.1.2.1.18 |
rprClientStatsGroupCollection of objects counting MAC client interface total statistics. Unknown .1.0.8802.17.1.1.2.1.19 |
rprErrorCurrentGroupCollection of objects counting MAC span error current statistics. Unknown .1.0.8802.17.1.1.2.1.20 |
rprErrorIntervalGroupCollection of objects counting MAC span error intervals statistics. Unknown .1.0.8802.17.1.1.2.1.21 |
rprErrorDayGroupCollection of objects counting MAC span error 24 hours statistics. Unknown .1.0.8802.17.1.1.2.1.22 |
rprErrorStatsGroupCollection of objects counting MAC span error total statistics. Unknown .1.0.8802.17.1.1.2.1.23 |
rprCompliances OBJECT IDENTIFIER .1.0.8802.17.1.1.2.2 |
rprModuleTotalStatsComplianceThe compliance statement for agent that support RPR operation with total statistics collections. Unknown .1.0.8802.17.1.1.2.2.1 |