BRIDGE-MIB
AI MIB Summary
BRIDGE-MIB monitors IEEE 802.1D-compliant Layer 2 switching devices to track Spanning Tree Protocol (STP) states, bridge forwarding tables, port statistics, and MAC address aging timers.
The Bridge MIB module for managing devices that support IEEE 802.1D. Copyright (C) The Internet Society (2005). This version of this MIB module is part of RFC 4188; see the RFC itself for full legal notices.
Main OID:
dot1dBridge.1.3.6.1.2.1.17
82
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
82 total| Object Name |
|---|
dot1dBridgeThe Bridge MIB module for managing devices that support IEEE 802.1D. Copyright (C) The Internet Society (2005). This version of this MIB module is part of RFC 4188; see the RFC itself for full legal notices. MODULE-IDENTITY .1.3.6.1.2.1.17 |
dot1dNotifications OBJECT IDENTIFIER .1.3.6.1.2.1.17.0 |
newRootThe newRoot trap indicates that the sending agent has become the new root of the Spanning Tree; the trap is sent by a bridge soon after its election as the new root, e.g., upon expiration of the Topology Change Timer, immediately subsequent to its election. Implementation of this trap is optional. NOTIFICATION-TYPE .1.3.6.1.2.1.17.0.1 |
topologyChangeA topologyChange trap is sent by a bridge when any of its configured ports transitions from the Learning state to the Forwarding state, or from the Forwarding state to the Blocking state. The trap is not sent if a newRoot trap is sent for the same transition. Implementation of this trap is optional. NOTIFICATION-TYPE .1.3.6.1.2.1.17.0.2 |
dot1dBase OBJECT IDENTIFIER .1.3.6.1.2.1.17.1 |
dot1dBaseBridgeAddressThe MAC address used by this bridge when it must be referred to in a unique fashion. It is recommended that this be the numerically smallest MAC address of all ports that belong to this bridge. However, it is only required to be unique. When concatenated with dot1dStpPriority, a unique BridgeIdentifier is formed, which is used in the Spanning Tree Protocol.ro MacAddress (SNMPv2-TC) .1.3.6.1.2.1.17.1.1 |
dot1dBaseNumPortsThe number of ports controlled by this bridging entity.ro Integer32 UNITS "ports" .1.3.6.1.2.1.17.1.2 |
dot1dBaseTypeIndicates what type of bridging this bridge can perform. If a bridge is actually performing a certain type of bridging, this will be indicated by entries in the port table for the given type.ro Enumeration .1.3.6.1.2.1.17.1.3 |
dot1dBasePortTableA table that contains generic information about every port that is associated with this bridge. Transparent, source-route, and srt ports are included. SEQUENCE OF Dot1dBasePortEntry .1.3.6.1.2.1.17.1.4 |
dot1dBasePortEntryA list of information for each port of the bridge. Dot1dBasePortEntry .1.3.6.1.2.1.17.1.4.1 |
dot1dBasePortThe port number of the port for which this entry contains bridge management information.ro Integer32 .1.3.6.1.2.1.17.1.4.1.1 |
dot1dBasePortIfIndexThe value of the instance of the ifIndex object, defined in IF-MIB, for the interface corresponding to this port.ro InterfaceIndex (IF-MIB) .1.3.6.1.2.1.17.1.4.1.2 |
dot1dBasePortCircuitFor a port that (potentially) has the same value of dot1dBasePortIfIndex as another port on the same bridge. This object contains the name of an object instance unique to this port. For example, in the case where multiple ports correspond one-to-one with multiple X.25 virtual circuits, this value might identify an (e.g., the first) object instance associated with the X.25 virtual circuit corresponding to this port. For a port which has a unique value of dot1dBasePortIfIndex, this object can have the value { 0 0 }.ro OBJECT IDENTIFIER .1.3.6.1.2.1.17.1.4.1.3 |
dot1dBasePortDelayExceededDiscardsThe number of frames discarded by this port due to excessive transit delay through the bridge. It is incremented by both transparent and source route bridges.ro Counter32 .1.3.6.1.2.1.17.1.4.1.4 |
dot1dBasePortMtuExceededDiscardsThe number of frames discarded by this port due to an excessive size. It is incremented by both transparent and source route bridges.ro Counter32 .1.3.6.1.2.1.17.1.4.1.5 |
dot1dStp OBJECT IDENTIFIER .1.3.6.1.2.1.17.2 |
dot1dStpProtocolSpecificationAn indication of what version of the Spanning Tree Protocol is being run. The value 'decLb100(2)' indicates the DEC LANbridge 100 Spanning Tree protocol. IEEE 802.1D implementations will return 'ieee8021d(3)'. If future versions of the IEEE Spanning Tree Protocol that are incompatible with the current version are released a new value will be defined.ro Enumeration .1.3.6.1.2.1.17.2.1 |
dot1dStpPriorityThe value of the write-able portion of the Bridge ID (i.e., the first two octets of the (8 octet long) Bridge ID). The other (last) 6 octets of the Bridge ID are given by the value of dot1dBaseBridgeAddress. On bridges supporting IEEE 802.1t or IEEE 802.1w, permissible values are 0-61440, in steps of 4096.rw Integer32 .1.3.6.1.2.1.17.2.2 |
dot1dStpTimeSinceTopologyChangeThe time (in hundredths of a second) since the last time a topology change was detected by the bridge entity. For RSTP, this reports the time since the tcWhile timer for any port on this Bridge was nonzero.ro TimeTicks UNITS "centi-seconds" .1.3.6.1.2.1.17.2.3 |
dot1dStpTopChangesThe total number of topology changes detected by this bridge since the management entity was last reset or initialized.ro Counter32 .1.3.6.1.2.1.17.2.4 |
dot1dStpDesignatedRootThe bridge identifier of the root of the spanning tree, as determined by the Spanning Tree Protocol, as executed by this node. This value is used as the Root Identifier parameter in all Configuration Bridge PDUs originated by this node.ro BridgeId .1.3.6.1.2.1.17.2.5 |
dot1dStpRootCostThe cost of the path to the root as seen from this bridge.ro Integer32 .1.3.6.1.2.1.17.2.6 |
dot1dStpRootPortThe port number of the port that offers the lowest cost path from this bridge to the root bridge.ro Integer32 .1.3.6.1.2.1.17.2.7 |
dot1dStpMaxAgeThe maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value that this bridge is currently using.ro Timeout UNITS "centi-seconds" .1.3.6.1.2.1.17.2.8 |
dot1dStpHelloTimeThe amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree, or trying to become so, in units of hundredths of a second. This is the actual value that this bridge is currently using.ro Timeout UNITS "centi-seconds" .1.3.6.1.2.1.17.2.9 |
dot1dStpHoldTimeThis time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredths of a second.ro Integer32 UNITS "centi-seconds" .1.3.6.1.2.1.17.2.10 |
dot1dStpForwardDelayThis time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines how long the port stays in each of the Listening and Learning states, which precede the Forwarding state. This value is also used when a topology change has been detected and is underway, to age all dynamic entries in the Forwarding Database. [Note that this value is the one that this bridge is currently using, in contrast to dot1dStpBridgeForwardDelay, which is the value that this bridge and all others would start using if/when this bridge were to become the root.]ro Timeout UNITS "centi-seconds" .1.3.6.1.2.1.17.2.11 |
dot1dStpBridgeMaxAgeThe value that all bridges use for MaxAge when this bridge is acting as the root. Note that 802.1D-1998 specifies that the range for this parameter is related to the value of dot1dStpBridgeHelloTime. The granularity of this timer is specified by 802.1D-1998 to be 1 second. An agent may return a badValue error if a set is attempted to a value that is not a whole number of seconds.rw Timeout .1.3.6.1.2.1.17.2.12 |
dot1dStpBridgeHelloTimeThe value that all bridges use for HelloTime when this bridge is acting as the root. The granularity of this timer is specified by 802.1D-1998 to be 1 second. An agent may return a badValue error if a set is attempted to a value that is not a whole number of seconds.rw Timeout .1.3.6.1.2.1.17.2.13 |
dot1dStpBridgeForwardDelayThe value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D-1998 specifies that the range for this parameter is related to the value of dot1dStpBridgeMaxAge. The granularity of this timer is specified by 802.1D-1998 to be 1 second. An agent may return a badValue error if a set is attempted to a value that is not a whole number of seconds.rw Timeout .1.3.6.1.2.1.17.2.14 |
dot1dStpPortTableA table that contains port-specific information for the Spanning Tree Protocol. SEQUENCE OF Dot1dStpPortEntry .1.3.6.1.2.1.17.2.15 |
dot1dStpPortEntryA list of information maintained by every port about the Spanning Tree Protocol state for that port. Dot1dStpPortEntry .1.3.6.1.2.1.17.2.15.1 |
dot1dStpPortThe port number of the port for which this entry contains Spanning Tree Protocol management information.ro Integer32 .1.3.6.1.2.1.17.2.15.1.1 |
dot1dStpPortPriorityThe value of the priority field that is contained in the first (in network byte order) octet of the (2 octet long) Port ID. The other octet of the Port ID is given by the value of dot1dStpPort. On bridges supporting IEEE 802.1t or IEEE 802.1w, permissible values are 0-240, in steps of 16.rw Integer32 .1.3.6.1.2.1.17.2.15.1.2 |
dot1dStpPortStateThe port's current state, as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the bridge has detected a port that is malfunctioning, it will place that port into the broken(6) state. For ports that are disabled (see dot1dStpPortEnable), this object will have a value of disabled(1).ro Enumeration .1.3.6.1.2.1.17.2.15.1.3 |
dot1dStpPortEnableThe enabled/disabled status of the port.rw Enumeration .1.3.6.1.2.1.17.2.15.1.4 |
dot1dStpPortPathCostThe contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802.1D-1998 recommends that the default value of this parameter be in inverse proportion to the speed of the attached LAN. New implementations should support dot1dStpPortPathCost32. If the port path costs exceeds the maximum value of this object then this object should report the maximum value, namely 65535. Applications should try to read the dot1dStpPortPathCost32 object if this object reports the maximum value.rw Integer32 .1.3.6.1.2.1.17.2.15.1.5 |
dot1dStpPortDesignatedRootThe unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the port is attached.ro BridgeId .1.3.6.1.2.1.17.2.15.1.6 |
dot1dStpPortDesignatedCostThe path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs.ro Integer32 .1.3.6.1.2.1.17.2.15.1.7 |
dot1dStpPortDesignatedBridgeThe Bridge Identifier of the bridge that this port considers to be the Designated Bridge for this port's segment.ro BridgeId .1.3.6.1.2.1.17.2.15.1.8 |
dot1dStpPortDesignatedPortThe Port Identifier of the port on the Designated Bridge for this port's segment.ro OCTET STRING .1.3.6.1.2.1.17.2.15.1.9 |
dot1dStpPortForwardTransitionsThe number of times this port has transitioned from the Learning state to the Forwarding state.ro Counter32 .1.3.6.1.2.1.17.2.15.1.10 |
dot1dStpPortPathCost32The contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802.1D-1998 recommends that the default value of this parameter be in inverse proportion to the speed of the attached LAN. This object replaces dot1dStpPortPathCost to support IEEE 802.1t.rw Integer32 .1.3.6.1.2.1.17.2.15.1.11 |
dot1dSr OBJECT IDENTIFIER .1.3.6.1.2.1.17.3 |
dot1dTp OBJECT IDENTIFIER .1.3.6.1.2.1.17.4 |
dot1dTpLearnedEntryDiscardsThe total number of Forwarding Database entries that have been or would have been learned, but have been discarded due to a lack of storage space in the Forwarding Database. If this counter is increasing, it indicates that the Forwarding Database is regularly becoming full (a condition that has unpleasant performance effects on the subnetwork). If this counter has a significant value but is not presently increasing, it indicates that the problem has been occurring but is not persistent.ro Counter32 .1.3.6.1.2.1.17.4.1 |
dot1dTpAgingTimeThe timeout period in seconds for aging out dynamically-learned forwarding information. 802.1D-1998 recommends a default of 300 seconds.rw Integer32 .1.3.6.1.2.1.17.4.2 |
dot1dTpFdbTableA table that contains information about unicast entries for which the bridge has forwarding and/or filtering information. This information is used by the transparent bridging function in determining how to propagate a received frame. SEQUENCE OF Dot1dTpFdbEntry .1.3.6.1.2.1.17.4.3 |
dot1dTpFdbEntryInformation about a specific unicast MAC address for which the bridge has some forwarding and/or filtering information. Dot1dTpFdbEntry .1.3.6.1.2.1.17.4.3.1 |
dot1dTpFdbAddressA unicast MAC address for which the bridge has forwarding and/or filtering information.ro MacAddress (SNMPv2-TC) .1.3.6.1.2.1.17.4.3.1.1 |
dot1dTpFdbPortEither the value '0', or the port number of the port on which a frame having a source address equal to the value of the corresponding instance of dot1dTpFdbAddress has been seen. A value of '0' indicates that the port number has not been learned, but that the bridge does have some forwarding/filtering information about this address (e.g., in the dot1dStaticTable). Implementors are encouraged to assign the port value to this object whenever it is learned, even for addresses for which the corresponding value of dot1dTpFdbStatus is not learned(3).ro Integer32 .1.3.6.1.2.1.17.4.3.1.2 |
dot1dTpFdbStatusThe status of this entry. The meanings of the values are: other(1) - none of the following. This would include the case where some other MIB object (not the corresponding instance of dot1dTpFdbPort, nor an entry in the dot1dStaticTable) is being used to determine if and how frames addressed to the value of the corresponding instance of dot1dTpFdbAddress are being forwarded. invalid(2) - this entry is no longer valid (e.g., it was learned but has since aged out), but has not yet been flushed from the table. learned(3) - the value of the corresponding instance of dot1dTpFdbPort was learned, and is being used. self(4) - the value of the corresponding instance of dot1dTpFdbAddress represents one of the bridge's addresses. The corresponding instance of dot1dTpFdbPort indicates which of the bridge's ports has this address. mgmt(5) - the value of the corresponding instance of dot1dTpFdbAddress is also the value of an existing instance of dot1dStaticAddress.ro Enumeration .1.3.6.1.2.1.17.4.3.1.3 |
dot1dTpPortTableA table that contains information about every port that is associated with this transparent bridge. SEQUENCE OF Dot1dTpPortEntry .1.3.6.1.2.1.17.4.4 |
dot1dTpPortEntryA list of information for each port of a transparent bridge. Dot1dTpPortEntry .1.3.6.1.2.1.17.4.4.1 |
dot1dTpPortThe port number of the port for which this entry contains Transparent bridging management information.ro Integer32 .1.3.6.1.2.1.17.4.4.1.1 |
dot1dTpPortMaxInfoThe maximum size of the INFO (non-MAC) field that this port will receive or transmit.ro Integer32 UNITS "bytes" .1.3.6.1.2.1.17.4.4.1.2 |
dot1dTpPortInFramesThe number of frames that have been received by this port from its segment. Note that a frame received on the interface corresponding to this port is only counted by this object if and only if it is for a protocol being processed by the local bridging function, including bridge management frames.ro Counter32 UNITS "frames" .1.3.6.1.2.1.17.4.4.1.3 |
dot1dTpPortOutFramesThe number of frames that have been transmitted by this port to its segment. Note that a frame transmitted on the interface corresponding to this port is only counted by this object if and only if it is for a protocol being processed by the local bridging function, including bridge management frames.ro Counter32 UNITS "frames" .1.3.6.1.2.1.17.4.4.1.4 |
dot1dTpPortInDiscardsCount of received valid frames that were discarded (i.e., filtered) by the Forwarding Process.ro Counter32 UNITS "frames" .1.3.6.1.2.1.17.4.4.1.5 |
dot1dStatic OBJECT IDENTIFIER .1.3.6.1.2.1.17.5 |
dot1dStaticTableA table containing filtering information configured into the bridge by (local or network) management specifying the set of ports to which frames received from specific ports and containing specific destination addresses are allowed to be forwarded. The value of zero in this table, as the port number from which frames with a specific destination address are received, is used to specify all ports for which there is no specific entry in this table for that particular destination address. Entries are valid for unicast and for group/broadcast addresses. SEQUENCE OF Dot1dStaticEntry .1.3.6.1.2.1.17.5.1 |
dot1dStaticEntryFiltering information configured into the bridge by (local or network) management specifying the set of ports to which frames received from a specific port and containing a specific destination address are allowed to be forwarded. Dot1dStaticEntry .1.3.6.1.2.1.17.5.1.1 |
dot1dStaticAddressThe destination MAC address in a frame to which this entry's filtering information applies. This object can take the value of a unicast address, a group address, or the broadcast address.rw MacAddress (SNMPv2-TC) .1.3.6.1.2.1.17.5.1.1.1 |
dot1dStaticReceivePortEither the value '0', or the port number of the port from which a frame must be received in order for this entry's filtering information to apply. A value of zero indicates that this entry applies on all ports of the bridge for which there is no other applicable entry.rw Integer32 .1.3.6.1.2.1.17.5.1.1.2 |
dot1dStaticAllowedToGoToThe set of ports to which frames received from a specific port and destined for a specific MAC address, are allowed to be forwarded. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1', then that port is included in the set of ports; the port is not included if its bit has a value of '0'. (Note that the setting of the bit corresponding to the port from which a frame is received is irrelevant.) The default value of this object is a string of ones of appropriate length. The value of this object may exceed the required minimum maximum message size of some SNMP transport (484 bytes, in the case of SNMP over UDP, see RFC 3417, section 3.2). SNMP engines on bridges supporting a large number of ports must support appropriate maximum message sizes.rw OCTET STRING .1.3.6.1.2.1.17.5.1.1.3 |
dot1dStaticStatusThis object indicates the status of this entry. The default value is permanent(3). other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. invalid(2) - writing this value to the object removes the corresponding entry. permanent(3) - this entry is currently in use and will remain so after the next reset of the bridge. deleteOnReset(4) - this entry is currently in use and will remain so until the next reset of the bridge. deleteOnTimeout(5) - this entry is currently in use and will remain so until it is aged out.rw Enumeration .1.3.6.1.2.1.17.5.1.1.4 |
dot1dConformance OBJECT IDENTIFIER .1.3.6.1.2.1.17.8 |
dot1dGroups OBJECT IDENTIFIER .1.3.6.1.2.1.17.8.1 |
dot1dBaseBridgeGroupBridge level information for this device. Unknown .1.3.6.1.2.1.17.8.1.1 |
dot1dBasePortGroupInformation for each port on this device. Unknown .1.3.6.1.2.1.17.8.1.2 |
dot1dStpBridgeGroupBridge level Spanning Tree data for this device. Unknown .1.3.6.1.2.1.17.8.1.3 |
dot1dStpPortGroupSpanning Tree data for each port on this device. Unknown .1.3.6.1.2.1.17.8.1.4 |
dot1dStpPortGroup2Spanning Tree data for each port on this device. Unknown .1.3.6.1.2.1.17.8.1.5 |
dot1dStpPortGroup3Spanning Tree data for devices supporting 32-bit path costs. Unknown .1.3.6.1.2.1.17.8.1.6 |
dot1dTpBridgeGroupBridge level Transparent Bridging data. Unknown .1.3.6.1.2.1.17.8.1.7 |
dot1dTpFdbGroupFiltering Database information for the Bridge. Unknown .1.3.6.1.2.1.17.8.1.8 |
dot1dTpGroupDynamic Filtering Database information for each port of the Bridge. Unknown .1.3.6.1.2.1.17.8.1.9 |
dot1dStaticGroupStatic Filtering Database information for each port of the Bridge. Unknown .1.3.6.1.2.1.17.8.1.10 |
dot1dNotificationGroupGroup of objects describing notifications (traps). Unknown .1.3.6.1.2.1.17.8.1.11 |
dot1dCompliances OBJECT IDENTIFIER .1.3.6.1.2.1.17.8.2 |
bridgeCompliance1493The compliance statement for device support of bridging services, as per RFC1493. Unknown .1.3.6.1.2.1.17.8.2.1 |
bridgeCompliance4188The compliance statement for device support of bridging services. This supports 32-bit Path Cost values and the more restricted bridge and port priorities, as per IEEE 802.1t. Full support for the 802.1D management objects requires that the SNMPv2-MIB [RFC3418] objects sysDescr, and sysUpTime, as well as the IF-MIB [RFC2863] objects ifIndex, ifType, ifDescr, ifPhysAddress, and ifLastChange are implemented. Unknown .1.3.6.1.2.1.17.8.2.2 |
More MIBs from Default
Browse all DefaultMIBs →RC-TLS-MIB
SNMP MIB module
2614 objects→
AVAYA-WLAN-MIB
The AVAYA-WLAN-MIB provides SNMP-based management and monitoring capabilities for Avaya wireless LAN infrastructure, enabling the collection of performance metrics such as access point status, client association counts, signal strength, and radio interface statistics. This module facilitates the tracking of WLAN-specific events and configuration parameters to support network availability and troubleshooting within Avaya wireless deployments.
2022 objects→
VMWARE-NSX-MIB
The VMWARE-NSX-MIB enables SNMP-based monitoring and management of VMware NSX-T Data Center virtual network infrastructure, exposing metrics for logical switches, routers, distributed firewalls, and overlay tunnel states. It facilitates the tracking of Layer 2 through Layer 7 service instances, including access control lists, Quality of Service policies, and virtual network topology changes within the software-defined networking environment.
1035 objects→
923switch.m
Standard SNMP MIB module defining data structures for 923switch.m.
999 objects→
CTATX-MIB
Standard SNMP MIB module defining data structures for CTATX-MIB.
747 objects→
DC-BGP-MIB
SNMP MIB module
652 objects→