E5-121-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
1064
Objects
Active
Status
8
Dependencies
Imported Objects
Objects
1064 total| Object Name |
|---|
calixNetworks OBJECT IDENTIFIER .1.3.6.1.4.1.6321 |
RFC1155-SMI Unknown .1.3.6.1.4.1.6321 |
calixRegistrations OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1 |
calixProducts OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2 |
e5x100 OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3 |
e5x121 OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.4 |
alarmconf OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.4.2 |
alarmOpsThe manager sets the corresponding bit value to 1 to start the operation
and the agent clears the object to zero when the operation is successfully completed.
The various bit positions are:
BIT 1: clear
BIT 2: cutoffrw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.2.1 |
alarmConfTableThis table includes alarm configuration. SEQUENCE OF AlarmConfEntry .1.3.6.1.4.1.6321.1.2.3.4.2.2 |
alarmConfEntryAn entry in alarmConfTable. AlarmConfEntry .1.3.6.1.4.1.6321.1.2.3.4.2.2.1 |
alarmConfId5000:vdslLine_up
5001:vdslLine_down
5002:vdsl_tca_lol
5003:vdsl_tca_lof
5004:vdsl_tca_los
5005:vdsl_tca_lop
5006:vdsl_tca_es
5007:vdsl_tca_ses
5008:vdsl_tca_uas
5009:xd_xtuc_loftrap
5010:xd_xtuc_lostrap
5011:xd_xtur_loftrap
5012:xd_xtur_lostrap
5013:xd_xtur_lprtrap
5014:ad_dhcp_rt_full
5015:ad_dhcp_dm_conflict
5016:ad_dhcp_entry_full
5017:ad_dhcp_ip_dup
5018:ad_dhcp_mac_dup
10000:eqptVol_err
10001:eqptEqpttemp_err
10002:eqptFan_err
10003:eqptHw_rtc_fail
10004:eqptHw_mon_fail
10005:eqptCold_start
10006:eqptWarm_start
10007:eqptAlm_input
10008:voip_battery_fail
10009:voip_clock_fail
10010:voip_ringer_fault
10011:eqptAlm_input2
10012:eqptAlm_input3
15000:sysReboot
15001:sysAco
15002:sysAlm_clear
15003:sysLogin_fail
15004:sysAnti_spoofing
15005:sysAlm_svrty_change
15006:sysHost_terminate
20000:enetUp
20001:enetDown
25000:voip_temp_error
25001:voip_dc_power_fail
25002:voip_ac_power_fail
25003:voip_ring_timer_fail
25004:voip_ring_rsrce_fail
25006:voip_dhcp_clt_fail
25007:voip_call_setup_failed
25008:voip_call_threshold_violate
30000:cfmErrorro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.2.2.1.1 |
alarmConfFacilityAlarm facility.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.2.2.1.2 |
alarmConfTargetThe destination which alarms are reported to. Set the bit to 1 to enable the target.
BIT 1: snmp trap
BIT 2: syslogrw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.2.2.1.3 |
alarmConfSeverityAlarm severityrw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.2.2.1.4 |
alarmConfClearableSetting the object to one indicates that the alarm is to be cleared when user submits alarm clear.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.2.2.1.5 |
alarmCurrTableThis table includes current alarm information. SEQUENCE OF AlarmCurrEntry .1.3.6.1.4.1.6321.1.2.3.4.2.3 |
alarmCurrEntryAn entry in alarmCurrTable. AlarmCurrEntry .1.3.6.1.4.1.6321.1.2.3.4.2.3.1 |
alarmCurrIndexIndex of the alarm.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.2.3.1.1 |
alarmCurrOccurTimeAlarm occurence time (in hundredths of a second) since the system was last re-initialized.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.6321.1.2.3.4.2.3.1.2 |
alarmCurrTrapOidTrap OID of the alarm.ro OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.4.2.3.1.3 |
alarmCurrParam1The 1st parameter of the alarm.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.2.3.1.4 |
alarmCurrParam2The 2nd parameter of the alarm.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.2.3.1.5 |
alarmCurrParam3The 3rd parameter of the alarm.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.2.3.1.6 |
alarmCurrParam4The 4th parameter of the alarm.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.2.3.1.7 |
alarmCurrParam5The 5th parameter of the alarm.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.2.3.1.8 |
alarmCurrParam6The 6th parameter of the alarm.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.2.3.1.9 |
alarmCurrParam7The 7th parameter of the alarm.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.2.3.1.10 |
alarmCurrParam8The 8th parameter of the alarm.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.2.3.1.11 |
alarmCurrTimeDescrThe string representation of occurence time (YYYY/MM/DD HH:MM:SS).ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.4.2.3.1.12 |
alarmCurrSeverityThe severity of the alarm.ro Enumeration .1.3.6.1.4.1.6321.1.2.3.4.2.3.1.13 |
alarmCurrDescrThe description of the alarm.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.4.2.3.1.14 |
alarmSeverityPortTableThis table includes the configuration of alarm reporting severity threshold for each port. SEQUENCE OF AlarmSeverityPortEntry .1.3.6.1.4.1.6321.1.2.3.4.2.4 |
alarmSeverityPortEntryAn entry in alarmSeverityPortTable. AlarmSeverityPortEntry .1.3.6.1.4.1.6321.1.2.3.4.2.4.1 |
severityThreshThe minimum alarm severity that is reported.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.2.4.1.1 |
diagnostic OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.4.4 |
selt OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.4.4.3 |
seltTargetIfIndex of the port which would be performed single end loopback test.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.4.3.1 |
seltOpsThe manager sets the object to 1 to start the selt
and the agent clears the object to zero when selt is successfully completed.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.4.3.2 |
seltStatusStatus description of the selt result.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.4.4.3.3 |
seltCableTypeThe cable type that selt result indicates.ro Enumeration .1.3.6.1.4.1.6321.1.2.3.4.4.3.4 |
seltLoopEstimateLengthFtThe estimated loop length that selt result indicates.ro INTEGER UNITS "feet" .1.3.6.1.4.1.6321.1.2.3.4.4.3.5 |
seltLoopEstimateLengthMeterThe estimated loop length that selt result indicates.ro INTEGER UNITS "meter" .1.3.6.1.4.1.6321.1.2.3.4.4.3.6 |
ldm OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.4.4.4 |
ldmTargetIfIndex of the port which would be performed ldm test.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.4.4.1 |
ldmOpsThe manager sets the object to 1 to start the ldm test
and the agent clears the object to zero when ldm test is successfully completed.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.4.4.2 |
ldmStatusStatus description of ldm test result.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.4.4.4.3 |
ldmXtucLoopAttenuationLoop Attenuation.ro INTEGER UNITS "tenth dB" .1.3.6.1.4.1.6321.1.2.3.4.4.4.4 |
ldmXtucSignalAttenuationSignal Attenuation.ro INTEGER UNITS "tenth dB" .1.3.6.1.4.1.6321.1.2.3.4.4.4.5 |
ldmXtucSignalMarginSignal Margin.ro INTEGER UNITS "tenth dB" .1.3.6.1.4.1.6321.1.2.3.4.4.4.6 |
ldmXtucAggregateTxPowerActual Aggregate Transmit Power.ro INTEGER UNITS "tenth dB" .1.3.6.1.4.1.6321.1.2.3.4.4.4.7 |
ldmXtucAttainableBitRateAttainable Bit Rate.ro Unsigned32 UNITS "bits per second" .1.3.6.1.4.1.6321.1.2.3.4.4.4.8 |
ldmXturLoopAttenuationLoop Attenuation.ro INTEGER UNITS "tenth dB" .1.3.6.1.4.1.6321.1.2.3.4.4.4.9 |
ldmXturSignalAttenuationSignal Attenuation.ro INTEGER UNITS "tenth dB" .1.3.6.1.4.1.6321.1.2.3.4.4.4.10 |
ldmXturSignalMarginSignal Margin.ro INTEGER UNITS "tenth dB" .1.3.6.1.4.1.6321.1.2.3.4.4.4.11 |
ldmXturAggregateTxPowerActual Aggregate Transmit Power.ro INTEGER UNITS "tenth dB" .1.3.6.1.4.1.6321.1.2.3.4.4.4.12 |
ldmXturAttainableBitRateAttainable Bit Rate.ro Unsigned32 UNITS "bits per second" .1.3.6.1.4.1.6321.1.2.3.4.4.4.13 |
ldmXtucNumOfSubcarriersPerPortThe number of subcarriers per port for ATU-C.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.4.4.14 |
ldmXturNumOfSubcarriersPerPortThe number of subcarriers per port for ATU-R.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.4.4.15 |
ldmXtucHlinScaleScale of Hlin.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.4.4.16 |
ldmXtucHlinReal1The object provides real part of Hlin for the first 256 subcarriers.
Each subcarrier takes two octets to store the value.ro OCTET STRING .1.3.6.1.4.1.6321.1.2.3.4.4.4.17 |
ldmXtucHlinReal2The object provides real part of Hlin for the last 256 subcarriers.
Each subcarrier takes two octets to store the value.ro OCTET STRING .1.3.6.1.4.1.6321.1.2.3.4.4.4.18 |
ldmXtucHlinImage1The object provides image part of Hlin for the first 256 subcarriers.
Each subcarrier takes two octets to store the value.ro OCTET STRING .1.3.6.1.4.1.6321.1.2.3.4.4.4.19 |
ldmXtucHlinImage2The object provides image part of Hlin for the last 256 subcarriers.
Each subcarrier takes two octets to store the value.ro OCTET STRING .1.3.6.1.4.1.6321.1.2.3.4.4.4.20 |
ldmXtucHlog1The object provides Hlog for the first 256 subcarriers.
Each subcarrier takes two octets to store the value.ro OCTET STRING .1.3.6.1.4.1.6321.1.2.3.4.4.4.21 |
ldmXtucHlog2The object provides Hlog for the last 256 subcarriers.
Each subcarrier takes two octets to store the value.ro OCTET STRING .1.3.6.1.4.1.6321.1.2.3.4.4.4.22 |
ldmXtucQln1The object provides QLN for the first 256 subcarriers.
Each subcarrier takes two octets to store the value.ro OCTET STRING .1.3.6.1.4.1.6321.1.2.3.4.4.4.23 |
ldmXtucQln2The object provides QLN for the last 256 subcarriers.
Each subcarrier takes two octets to store the value.ro OCTET STRING .1.3.6.1.4.1.6321.1.2.3.4.4.4.24 |
ldmXtucSnr1The object provides SNR for the first 256 subcarriers.
Each subcarrier takes two octets to store the value.ro OCTET STRING .1.3.6.1.4.1.6321.1.2.3.4.4.4.25 |
ldmXtucSnr2The object provides SNR for the last 256 subcarriers.
Each subcarrier takes two octets to store the value.ro OCTET STRING .1.3.6.1.4.1.6321.1.2.3.4.4.4.26 |
ldmXturHlinScaleScale of Hlin.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.4.4.27 |
ldmXturHlinRealReal part of Hlin. Each subcarrier takes two octets to store the value.ro OCTET STRING .1.3.6.1.4.1.6321.1.2.3.4.4.4.28 |
ldmXturHlinImageImage part of Hlin. Each subcarrier takes two octets to store the value.ro OCTET STRING .1.3.6.1.4.1.6321.1.2.3.4.4.4.29 |
ldmXturHlogHlog of subcarrier. Each subcarrier takes two octets to store the value.ro OCTET STRING .1.3.6.1.4.1.6321.1.2.3.4.4.4.30 |
ldmXturQlnQLN of subcarrier. Each subcarrier takes two octets to store the value.ro OCTET STRING .1.3.6.1.4.1.6321.1.2.3.4.4.4.31 |
ldmXturSnrSNR of subcarrier. Each subcarrier takes two octets to store the value.ro OCTET STRING .1.3.6.1.4.1.6321.1.2.3.4.4.4.32 |
ldmXtucHlogGroupFactorThe Hlog group factor of ATU-C.ro OCTET STRING .1.3.6.1.4.1.6321.1.2.3.4.4.4.33 |
ldmXtucQlnGroupFactorThe Qln group factor of ATU-C.ro OCTET STRING .1.3.6.1.4.1.6321.1.2.3.4.4.4.34 |
ldmXtucSnrGroupFactorThe Snr group factor of ATU-C.ro OCTET STRING .1.3.6.1.4.1.6321.1.2.3.4.4.4.35 |
ldmXturHlogGroupFactorThe Hlog group factor of ATU-R.ro OCTET STRING .1.3.6.1.4.1.6321.1.2.3.4.4.4.36 |
ldmXturQlnGroupFactorThe Qln group factor of ATU-R.ro OCTET STRING .1.3.6.1.4.1.6321.1.2.3.4.4.4.37 |
ldmXturSnrGroupFactorThe Snr group factor of ATU-R.ro OCTET STRING .1.3.6.1.4.1.6321.1.2.3.4.4.4.38 |
mlt OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.4.4.5 |
mltTargetIfIndex of the port which would be performed Metallic Link Test.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.4.5.1 |
mltOpsThe manager sets the object to 1 to start the mlt
and the agent clears the object to zero when mlt is successfully completed.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.4.5.2 |
mltOptionall : test all items
vac: test AC voltage
vdc: test DC voltage
rload: test load resistance
riso: test isolation resistance
cap: test capacitor
ren: test REN value
ring: test ring voltage
metering: test metering voltagerw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.4.5.3 |
mltForceForce test even the port is in use.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.4.5.4 |
mltResult OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.4.4.5.5 |
mltVacTipro INTEGER UNITS "0.1 rms" .1.3.6.1.4.1.6321.1.2.3.4.4.5.5.1 |
mltVacRingro INTEGER UNITS "0.1 rms" .1.3.6.1.4.1.6321.1.2.3.4.4.5.5.2 |
mltVacDiffro INTEGER UNITS "0.1 rms" .1.3.6.1.4.1.6321.1.2.3.4.4.5.5.3 |
mltVdcTipro INTEGER UNITS "0.1 volt" .1.3.6.1.4.1.6321.1.2.3.4.4.5.5.4 |
mltVdcRingro INTEGER UNITS "0.1 volt" .1.3.6.1.4.1.6321.1.2.3.4.4.5.5.5 |
mltVdcDiffro INTEGER UNITS "0.1 volt" .1.3.6.1.4.1.6321.1.2.3.4.4.5.5.6 |
mltRLoopro INTEGER UNITS "0.1 ohm" .1.3.6.1.4.1.6321.1.2.3.4.4.5.5.7 |
mltRtgro INTEGER UNITS "0.1 ohm" .1.3.6.1.4.1.6321.1.2.3.4.4.5.5.8 |
mltRrgro INTEGER UNITS "0.1 ohm" .1.3.6.1.4.1.6321.1.2.3.4.4.5.5.9 |
mltRtrro INTEGER UNITS "0.1 ohm" .1.3.6.1.4.1.6321.1.2.3.4.4.5.5.10 |
mltCtgro INTEGER UNITS "10^-9 F" .1.3.6.1.4.1.6321.1.2.3.4.4.5.5.11 |
mltCrgro INTEGER UNITS "10^-9 F" .1.3.6.1.4.1.6321.1.2.3.4.4.5.5.12 |
mltCtrro INTEGER UNITS "10^-9 F" .1.3.6.1.4.1.6321.1.2.3.4.4.5.5.13 |
mltRenro INTEGER UNITS "0.1 ren" .1.3.6.1.4.1.6321.1.2.3.4.4.5.5.14 |
mltVRingro INTEGER UNITS "0.1 rms" .1.3.6.1.4.1.6321.1.2.3.4.4.5.5.15 |
mltVMeteringro INTEGER UNITS "0.1 vpeak" .1.3.6.1.4.1.6321.1.2.3.4.4.5.5.16 |
mltDialToneDetectedro Enumeration .1.3.6.1.4.1.6321.1.2.3.4.4.5.5.17 |
mltDetectedDtmfCountro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.4.5.5.18 |
mltDialToneDelayro INTEGER UNITS "0.001 sec" .1.3.6.1.4.1.6321.1.2.3.4.4.5.5.19 |
mltRelayTablePerform specified MLT relay function, or turn off
MLT relay function in specified subscriber. SEQUENCE OF MltRelayEntry .1.3.6.1.4.1.6321.1.2.3.4.4.5.6 |
mltRelayEntryAn entry of mltRelayTable. MltRelayEntry .1.3.6.1.4.1.6321.1.2.3.4.4.5.6.1 |
mltRelaySetBy default, relay function is turned off.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.4.5.6.1.1 |
multicast OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.4.7 |
igmpEnableEnable/disable IGMP protocol.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.7.1 |
mcastBandwidth OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.4.7.4 |
mcastDefaultBandwidthDefault bandwidth requirement for a multicast channel.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.7.4.1 |
maxNumOfMcastBwThe maximum number of row entries that user can create in mcastBwTable.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.7.4.2 |
mcastBwTableThis table defines bandwidth budget for a range of multicast IP channels. SEQUENCE OF McastBwEntry .1.3.6.1.4.1.6321.1.2.3.4.7.4.3 |
mcastBwEntryAn entry of mcastBwTable. McastBwEntry .1.3.6.1.4.1.6321.1.2.3.4.7.4.3.1 |
mcastBwIndexThe index which specify the entry.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.7.4.3.1.1 |
mcastBwStartIpThe start multicast IP of the bandwidth control range.ro IpAddress .1.3.6.1.4.1.6321.1.2.3.4.7.4.3.1.2 |
mcastBwEndIpThe end multicast IP of the bandwidth control range.ro IpAddress .1.3.6.1.4.1.6321.1.2.3.4.7.4.3.1.3 |
mcastBwBandwidthThe bandwidth budget for the multicast IP channels.rw INTEGER UNITS "Kbps" .1.3.6.1.4.1.6321.1.2.3.4.7.4.3.1.4 |
mcastBwRowStatusThe row status of the entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.4.7.4.3.1.5 |
mcastBwPortTableThis table specify the multicast bandwidth control of the port. SEQUENCE OF McastBwPortEntry .1.3.6.1.4.1.6321.1.2.3.4.7.4.4 |
mcastBwPortEntryAn entry of mcastBwPortTable. McastBwPortEntry .1.3.6.1.4.1.6321.1.2.3.4.7.4.4.1 |
mcastBwPortEnableEnable/disable multicast bandwidth control for a port.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.7.4.4.1.1 |
mcastBwPortBandwidthSet bandwidth threshold for a port.rw INTEGER UNITS "Kbps" .1.3.6.1.4.1.6321.1.2.3.4.7.4.4.1.2 |
igmpCount OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.4.7.5 |
igmpCountPortTableThis table specify the IGMP count limiting of the port. SEQUENCE OF IgmpCountPortEntry .1.3.6.1.4.1.6321.1.2.3.4.7.5.1 |
igmpCountPortEntryAn entry of igmpCountPortTable. IgmpCountPortEntry .1.3.6.1.4.1.6321.1.2.3.4.7.5.1.1 |
igmpCountPortEnableEnable/disable IGMP count limiting for a port.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.7.5.1.1.1 |
igmpCountPortLimitThe maximum allowed IGMP report count for a port.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.7.5.1.1.2 |
mvlan OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.4.7.6 |
maxNumOfMvlanThe maximum number of row entries that user can create in mvlanTable.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.7.6.1 |
mvlanTableA table containing static configuration information for
each multicast VLAN configured into the device. SEQUENCE OF MvlanEntry .1.3.6.1.4.1.6321.1.2.3.4.7.6.2 |
mvlanEntryAn entry of mvlanTable. MvlanEntry .1.3.6.1.4.1.6321.1.2.3.4.7.6.2.1 |
mvlanIndexThe VLAN-ID refering to this VLAN.ro VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.6321.1.2.3.4.7.6.2.1.1 |
mvlanNameAn administratively assigned string, which may be used to identify the VLAN.rw DisplayString .1.3.6.1.4.1.6321.1.2.3.4.7.6.2.1.2 |
mvlanEgressPortsThe set of ports which are permanently assigned to the
egress list for this multicast VLAN.rw PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.6321.1.2.3.4.7.6.2.1.3 |
mvlanUntaggedPortsThe set of ports which should transmit egress packets
for this multicast VLAN as untagged.rw PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.6321.1.2.3.4.7.6.2.1.4 |
mvlanRowStatusThis object indicates the status of this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.4.7.6.2.1.5 |
mvlanTranslateTableA table that contains multicast to VLAN translation. SEQUENCE OF MvlanTranslateEntry .1.3.6.1.4.1.6321.1.2.3.4.7.6.3 |
mvlanTranslateEntryAn entry of mvlanTranslateTable. MvlanTranslateEntry .1.3.6.1.4.1.6321.1.2.3.4.7.6.3.1 |
mvlanTranslateIndexThe index which specif the entry.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.7.6.3.1.1 |
mvlanTranslateStartIpThe start IP of the multicast VLAN translation.rw IpAddress .1.3.6.1.4.1.6321.1.2.3.4.7.6.3.1.2 |
mvlanTranslateEndIpThe end IP of the multicast VLAN translation.rw IpAddress .1.3.6.1.4.1.6321.1.2.3.4.7.6.3.1.3 |
queryVid OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.4.7.7 |
maxNumOfQryVidThe maximum number of row entries that user can create in qryVidConfTable.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.7.7.1 |
qryVidConfTableThis table defines statically set VLANs used for response IGMP report. SEQUENCE OF QryVidConfEntry .1.3.6.1.4.1.6321.1.2.3.4.7.7.2 |
qryVidConfEntryAn entry in qryVidConfTable. QryVidConfEntry .1.3.6.1.4.1.6321.1.2.3.4.7.7.2.1 |
qryVidVLAN ID.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.7.7.2.1.1 |
qryVidRowStatusThis object indicates the status of this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.4.7.7.2.1.2 |
qryVidStatusTableThis table shows statically set or dynamically learned VLANs used for response IGMP report. SEQUENCE OF QryVidStatusEntry .1.3.6.1.4.1.6321.1.2.3.4.7.7.3 |
qryVidStatusEntryAn entry in qryVidStatusTable. QryVidStatusEntry .1.3.6.1.4.1.6321.1.2.3.4.7.7.3.1 |
qryVidTypeVLAN type.ro Enumeration .1.3.6.1.4.1.6321.1.2.3.4.7.7.3.1.1 |
igmpVersionSetting IGMP version.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.7.9 |
igmpLeaveModeConfigure IGMP leave message handling mode.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.7.10 |
igmpTimer OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.4.7.11 |
igmpQryIntervalSet IGMP query interval, 10~1000 in seconds.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.7.11.1 |
igmpRobustSet IGMP query Robustness, 1~5.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.7.11.2 |
igmpQryRespIntervalSet IGMP query response interval, 1~100 in 100 milliseconds.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.7.11.3 |
igmpLastMemQryIntervalSet IGMP Last Member Query interval, 1~5 in 100 milliseconds.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.7.11.4 |
igmpLastMemQryRobustSet Last Member Query Robustness, 1~5.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.7.11.5 |
auditQuery OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.4.7.12 |
auditQryEnableEnable/disable IGMP audit query.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.7.12.1 |
auditQryIntervalSet IGMP Audit Query Interval, 1~4 in 100 milliseconds.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.7.12.2 |
auditQryRobustSet IGMP Audit Query Robustness, 1~5.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.7.12.3 |
igmpProfile OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.4.7.13 |
maxNumberOfIgmpProfilesThe max number of IGMP profiles in the system.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.7.13.1 |
igmpProfileTableA table that contains IGMP Profiles. SEQUENCE OF IgmpProfileEntry .1.3.6.1.4.1.6321.1.2.3.4.7.13.2 |
igmpProfileEntryThe entry of IGMP Profile table. IgmpProfileEntry .1.3.6.1.4.1.6321.1.2.3.4.7.13.2.1 |
igmpProfileNameThe IGMP Profile name.ro DisplayString .1.3.6.1.4.1.6321.1.2.3.4.7.13.2.1.1 |
igmpProfileEnableEnable/disable IGMP Profile.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.7.13.2.1.2 |
igmpProfileMaxGroupSet maximum allowed multicast group, 1~64.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.7.13.2.1.3 |
igmpProfileRowStatusThe row status of the IGMP Profile entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.4.7.13.2.1.4 |
igmpFilterTableA table that contains IGMP Filters. SEQUENCE OF IgmpFilterEntry .1.3.6.1.4.1.6321.1.2.3.4.7.13.3 |
igmpFilterEntryThe entry of IGMP Filter table. IgmpFilterEntry .1.3.6.1.4.1.6321.1.2.3.4.7.13.3.1 |
igmpFilterIndexThe index which specifies the filter rule.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.7.13.3.1.1 |
igmpFilterStartIpThe start IP of the filter rule.rw IpAddress .1.3.6.1.4.1.6321.1.2.3.4.7.13.3.1.2 |
igmpFilterEndIpThe end IP of the filter rule.rw IpAddress .1.3.6.1.4.1.6321.1.2.3.4.7.13.3.1.3 |
igmpProfilePortTableThis table specifies the IGMP Profile of the port. SEQUENCE OF IgmpProfilePortEntry .1.3.6.1.4.1.6321.1.2.3.4.7.13.4 |
igmpProfilePortEntryAn entry in igmpProfilePortTable. IgmpProfilePortEntry .1.3.6.1.4.1.6321.1.2.3.4.7.13.4.1 |
igmpProfilePortProfileThe IGMP Profile of the port.rw OCTET STRING .1.3.6.1.4.1.6321.1.2.3.4.7.13.4.1.1 |
port OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.4.8 |
subrPortTableThis table includes subscriber attributes for the port. SEQUENCE OF SubrPortEntry .1.3.6.1.4.1.6321.1.2.3.4.8.1 |
subrPortEntryAn entry in subrPortTable. SubrPortEntry .1.3.6.1.4.1.6321.1.2.3.4.8.1.1 |
subrPortNameName of the subscriber.rw DisplayString .1.3.6.1.4.1.6321.1.2.3.4.8.1.1.1 |
subrPortTelTelephone number of the subscriber.rw DisplayString .1.3.6.1.4.1.6321.1.2.3.4.8.1.1.2 |
vdslPort OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.4.8.3 |
vdslLineConfTableThis table includes common attributes describing the VDSL line.
This table is supported by R2.00 and later versions. SEQUENCE OF VdslLineConfEntry .1.3.6.1.4.1.6321.1.2.3.4.8.3.1 |
vdslLineConfEntryAn entry in vdslLineConfTable. VdslLineConfEntry .1.3.6.1.4.1.6321.1.2.3.4.8.3.1.1 |
vdslLineConfUpboEnable/disable upstream power backoff control.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.8.3.1.1.1 |
vdslLineConfVdslProfileSet VDSL profile.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.8.3.1.1.2 |
vdslLineConfRfiBandSet VDSL customized RFI configuration.
disable: not apply RFI notch to port
ansi: use pre-defined ANSI RFI notch
etsi: use pre-defined ETSI notch
custom: user needs to define customized RFI notch band through vdslRfiCustomTablerw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.8.3.1.1.4 |
vdslLineConfIpqosProfilerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.4.8.3.1.1.5 |
vdslLineConfVturInpVTUR minimum INP valuerw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.8.3.1.1.6 |
vdslLineConfVtucInpVTUC mimimum INT valuerw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.8.3.1.1.7 |
vdslLineConfOptionMaskBit1: disable Trellis coding in ADSL mode
Bit2: disable Reed-Solomon coding for ADSL
Bit3: disable upstream bitswaps
Bit4: disable downstream bitwaps
Bit5: disable upstream 1-bit constellation support
Bit6: disable the transmit windowing in ADSL2+ mode
Bit7: disable S=0.5 support in G.dmt
Bit8: reserved
Bit9: enable nitro
Bit10: enable ADSL2 Annex L
Bit11: enable ADSL2+ Annex M
Bit12: enable US PTM optimization
Bit13: enable DS PTM optimization
Bit14: enable US PHYR
Bit15: enable DS PHYRrw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.8.3.1.1.8 |
vdslLineConfUpboForceLength-1 means max(kl0_CO,kl0_CPE).
-2 means min(kl0_CO,kl0_CPE).
-3 means kl0_CO.
-4 means kl0_CPE.
-5 means kl0_CPE + delta as calculated from.rw INTEGER (-5..1270) UNITS "0.1dB" .1.3.6.1.4.1.6321.1.2.3.4.8.3.1.1.9 |
vdslLineConfPsdShapePSD mask typerw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.8.3.1.1.10 |
vdslLineConfDpboEnable/Disable DPBOrw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.8.3.1.1.11 |
vdslLineConfDpboParamEselDPBO ESEL parameterrw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.8.3.1.1.12 |
vdslLineConfDpboParamEscmaDPBO ESCMA parameter -1~1.5 in step of 1/256.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.8.3.1.1.13 |
vdslLineConfDpboParamEscmbDPBO ESCMB parameter -1~1.5 in step of 1/256.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.8.3.1.1.14 |
vdslLineConfDpboParamEscmcDPBO ESCMC parameter -1~1.5 in step of 1/256.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.8.3.1.1.15 |
vdslLineConfDpboParamMusDPBO MUS parameter.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.8.3.1.1.16 |
vdslLineConfDpboParamFminDPBO FMIN parameterrw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.8.3.1.1.17 |
vdslLineConfDpboParamFmaxDPBO FMAX parameterrw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.8.3.1.1.18 |
vdslLineConfDpboParamPsdIdValid range for setting is 1~6.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.8.3.1.1.19 |
vdslVlan OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.4.8.3.2 |
vdslPortConfTableThis table includes common attributes describing the VDSL port.
This table is supported by R2.00 and later versions. SEQUENCE OF VdslPortConfEntry .1.3.6.1.4.1.6321.1.2.3.4.8.3.2.1 |
vdslPortConfEntryAn entry in vdslPortConfTable. VdslPortConfEntry .1.3.6.1.4.1.6321.1.2.3.4.8.3.2.1.1 |
vdslPortConfTlsEnableEnable/disable the transparent LAN service.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.8.3.2.1.1.4 |
vdslPortConfTlsVidThe transparent LAN service s-tag VID.rw VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.6321.1.2.3.4.8.3.2.1.1.5 |
vdslPortConfTlsPriorityThe transparent LAN service s-tag priority.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.8.3.2.1.1.6 |
vdslPortConfDtEnableEnable/disable the Double Tagging service.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.8.3.2.1.1.7 |
vdslPortConfDtSVidThe Double Tagging service s-tag VID.rw VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.6321.1.2.3.4.8.3.2.1.1.8 |
vdslPortConfDtSPriorityThe Double Tagging service s-tag priority.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.8.3.2.1.1.9 |
vdslPortConfDtCVidThe Double Tagging service c-tag VID.rw VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.6321.1.2.3.4.8.3.2.1.1.10 |
vdslPortConfDtCPriorityThe Double Tagging service c-tag priority.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.8.3.2.1.1.11 |
vdslPortVlanTranslateTableA table that contains VLAN translation. SEQUENCE OF VdslPortVlanTranslateEntry .1.3.6.1.4.1.6321.1.2.3.4.8.3.2.2 |
vdslPortVlanTranslateEntryAn entry in vdslPortVlanTranslateTable. VdslPortVlanTranslateEntry .1.3.6.1.4.1.6321.1.2.3.4.8.3.2.2.1 |
vdslPortVlanTranslateVpiVPI of the vtt.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.8.3.2.2.1.1 |
vdslPortVlanTranslateVciVCI of the vtt.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.8.3.2.2.1.2 |
vdslPortVlanTranslateCxvidCXVID of the vtt.ro VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.6321.1.2.3.4.8.3.2.2.1.3 |
vdslPortVlanTranslateCvidCVID of the vtt.ro VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.6321.1.2.3.4.8.3.2.2.1.4 |
vdslPortVlanTranslateSvidSVID of the vtt.ro VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.6321.1.2.3.4.8.3.2.2.1.5 |
vdslPortVlanTranslateDsonlyDonwstream direction only of the vtt.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.8.3.2.2.1.6 |
vdslPortVlanTranslateRowStatusThis object is used to create a new row or delete an existing row in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.4.8.3.2.2.1.7 |
vdslPortPvlanTableProtocol VLAN configuration table. SEQUENCE OF VdslPortPvlanEntry .1.3.6.1.4.1.6321.1.2.3.4.8.3.2.4 |
vdslPortPvlanEntryAn entry in vdslPortPvlanTable. VdslPortPvlanEntry .1.3.6.1.4.1.6321.1.2.3.4.8.3.2.4.1 |
vdslPortPvlanEtype0~0xffff.ro Unsigned32 .1.3.6.1.4.1.6321.1.2.3.4.8.3.2.4.1.1 |
vdslPortPvlanVidrw VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.6321.1.2.3.4.8.3.2.4.1.2 |
vdslPortPvlanPriorityrw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.8.3.2.4.1.3 |
vdslPortPvlanRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.4.8.3.2.4.1.4 |
vdslRfiCustomTableThis table includes VDSL customized RFI configuration.
This table is supported by R2.00 and later versions. SEQUENCE OF VdslRfiCustomEntry .1.3.6.1.4.1.6321.1.2.3.4.8.3.3 |
vdslRfiCustomEntryAn entry in vdslRfiCustomTable. VdslRfiCustomEntry .1.3.6.1.4.1.6321.1.2.3.4.8.3.3.1 |
vdslRfiCustomIndexIndex of the table.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.8.3.3.1.1 |
vdslRfiCustomStartFreqThe start value of the customized frequency range.rw INTEGER UNITS "KHz" .1.3.6.1.4.1.6321.1.2.3.4.8.3.3.1.2 |
vdslRfiCustomEndFreqThe end value of the customized frequency range.rw INTEGER UNITS "KHz" .1.3.6.1.4.1.6321.1.2.3.4.8.3.3.1.3 |
vdslRfiCustomEnableEnable or disable the customized frequency range setting.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.8.3.3.1.4 |
vdslLineConfUpboParamTableThis table includes VDSL UPBO configuration. SEQUENCE OF VdslLineConfUpboParamEntry .1.3.6.1.4.1.6321.1.2.3.4.8.3.4 |
vdslLineConfUpboParamEntryAn entry in vdslLineConfUpboParamTable. VdslLineConfUpboParamEntry .1.3.6.1.4.1.6321.1.2.3.4.8.3.4.1 |
vdslLineConfUpboParamBandIndex of the table.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.8.3.4.1.1 |
vdslLineConfUpboParamArw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.8.3.4.1.2 |
vdslLineConfUpboParamBrw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.8.3.4.1.3 |
vdslLineConfDpboTableThis table includes VDSL DPBO configuration. SEQUENCE OF VdslLineConfDpboEntry .1.3.6.1.4.1.6321.1.2.3.4.8.3.5 |
vdslLineConfDpboEntryAn entry in vdslLineConfDpboTable. VdslLineConfDpboEntry .1.3.6.1.4.1.6321.1.2.3.4.8.3.5.1 |
vdslLineConfDpboIndexIndex of the table.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.8.3.5.1.1 |
vdslLineConfDpboTonerw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.8.3.5.1.2 |
vdslLineConfDpboPsdrw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.8.3.5.1.3 |
pvc OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.4.8.4 |
maxNumOfPvcsThe maximum number of PVCs which could be created on a port.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.8.4.1 |
pvcTableThis table includes PVC configuration. SEQUENCE OF PvcEntry .1.3.6.1.4.1.6321.1.2.3.4.8.4.2 |
pvcEntryAn entry in pvcTable. PvcEntry .1.3.6.1.4.1.6321.1.2.3.4.8.4.2.1 |
pvcVpiVPI of the pvc.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.8.4.2.1.1 |
pvcVciVCI of the pvc.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.8.4.2.1.2 |
pvcPvidDefault VID of the pvc.ro VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.6321.1.2.3.4.8.4.2.1.3 |
pvcPriority802.1p default priority of the pvc.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.8.4.2.1.5 |
pvcProfileThe value of this object identifies the row in the ipqosProfileTable.rw DisplayString .1.3.6.1.4.1.6321.1.2.3.4.8.4.2.1.6 |
pvcEncapEncapsulation of the pvc.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.8.4.2.1.7 |
pvcRowStatusThis object is used to create a new row or delete an existing row in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.4.8.4.2.1.8 |
pvcAcNameAccess concentrator name for paepvc.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.4.8.4.2.1.11 |
pvcServiceNameService name for paepvc.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.4.8.4.2.1.12 |
pvcHelloTimeThe system will close the PVC if there are not any LCP echo messages passed through during the LCP hello time.rw INTEGER UNITS "second" .1.3.6.1.4.1.6321.1.2.3.4.8.4.2.1.13 |
pvcAutoEnable/disable auto detection for PPPoE/PPPoA encapsulation.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.8.4.2.1.14 |
pvcStateTableThis table show current PVC status. SEQUENCE OF PvcStateEntry .1.3.6.1.4.1.6321.1.2.3.4.8.4.3 |
pvcStateEntryAn entry in pvcStateTable. PvcStateEntry .1.3.6.1.4.1.6321.1.2.3.4.8.4.3.1 |
pvcStateVpiVPI of the pvc.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.8.4.3.1.1 |
pvcStateVciVCI of the pvc.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.8.4.3.1.2 |
pvcStatePvidDefault VID of the pvc.ro VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.6321.1.2.3.4.8.4.3.1.3 |
pvcStatePriority802.1p default priority of the pvc.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.8.4.3.1.4 |
pvcStateChannelTypeThe value of this object identifies the channel type at runtime.ro DisplayString .1.3.6.1.4.1.6321.1.2.3.4.8.4.3.1.8 |
pvcStateEncapThe value of this object identifies the channel encapsulation at runtime.ro DisplayString .1.3.6.1.4.1.6321.1.2.3.4.8.4.3.1.9 |
rpvc OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.4.8.8 |
rpvcGatewayTableThis table includes Routed Gateway configuration. SEQUENCE OF RpvcGatewayEntry .1.3.6.1.4.1.6321.1.2.3.4.8.8.1 |
rpvcGatewayEntryAn entry in Routed Gateway table. RpvcGatewayEntry .1.3.6.1.4.1.6321.1.2.3.4.8.8.1.1 |
rpvcGatewayIpIP of RPVC gateway.ro IpAddress .1.3.6.1.4.1.6321.1.2.3.4.8.8.1.1.1 |
rpvcGatewayVlanIdVlan id send to this RPVC gateway.rw VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.6321.1.2.3.4.8.8.1.1.2 |
rpvcGatewayRowStatusThis object is used to create a new row or delete an existing row in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.4.8.8.1.1.3 |
rpvcGatewayPriority802.1p p bit send to this RPVC gateway.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.8.8.1.1.4 |
rpvcTableThis table includes RPVC configuration. SEQUENCE OF RpvcEntry .1.3.6.1.4.1.6321.1.2.3.4.8.8.2 |
rpvcEntryAn entry in rpvcTable. RpvcEntry .1.3.6.1.4.1.6321.1.2.3.4.8.8.2.1 |
rpvcVpiVPI of the rpvc.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.8.8.2.1.1 |
rpvcVciVCI of the rpvc.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.8.8.2.1.2 |
rpvcEncapEncapsulation of the rpvc.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.8.8.2.1.3 |
rpvcProfileThe ipqos profile of the rpvc.rw DisplayString .1.3.6.1.4.1.6321.1.2.3.4.8.8.2.1.4 |
rpvcIpThe IP of the rpvc.ro IpAddress .1.3.6.1.4.1.6321.1.2.3.4.8.8.2.1.5 |
rpvcNetmaskThe IP mask of the rpvc IP.ro IpAddress .1.3.6.1.4.1.6321.1.2.3.4.8.8.2.1.6 |
rpvcGatewayIpAddressThe gateway IP of rpvc.rw IpAddress .1.3.6.1.4.1.6321.1.2.3.4.8.8.2.1.7 |
rpvcRowStatusThis object is used to create a new row or delete an existing row in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.4.8.8.2.1.8 |
rpvcRouteDomainTableThis table includes RPVC route domain configuration. SEQUENCE OF RpvcRouteDomainEntry .1.3.6.1.4.1.6321.1.2.3.4.8.8.3 |
rpvcRouteDomainEntryAn entry in rpvcRouteDomainTable. RpvcRouteDomainEntry .1.3.6.1.4.1.6321.1.2.3.4.8.8.3.1 |
rpvcRouteDomainVpiVPI of the rpvc.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.8.8.3.1.1 |
rpvcRouteDomainVciVCI of the rpvc.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.8.8.3.1.2 |
rpvcRouteDomainIpThe route domain IP.ro IpAddress .1.3.6.1.4.1.6321.1.2.3.4.8.8.3.1.3 |
rpvcRouteDomainNetmaskThe IP mask of the route domain IP.ro IpAddress .1.3.6.1.4.1.6321.1.2.3.4.8.8.3.1.4 |
rpvcRouteDomainRowStatusThis object is used to create a new row or delete an existing row in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.4.8.8.3.1.5 |
rpvcArpAgingTimeSet RPVC ARP proxy aging time 10..10000 seconds,
0 to disable againg.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.8.8.4 |
rpvcArpFlushFlush the RPVC ARP proxy table.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.8.8.5 |
dsBcastDisableTableThis table includes Down Stream Bcast configuration. SEQUENCE OF DsBcastDisableEntry .1.3.6.1.4.1.6321.1.2.3.4.8.9 |
dsBcastDisableEntryAn entry in Down Stream Bcast table. DsBcastDisableEntry .1.3.6.1.4.1.6321.1.2.3.4.8.9.1 |
dsBcastDisableVlanIddownstream broadcast disabled vid.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.8.9.1.1 |
dsBcastDisableRowStatusThis object is used to create a new row or delete an existing row in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.4.8.9.1.2 |
paepvc OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.4.8.10 |
paepvcTableThis table includes PPPoAoE PVC configuration. SEQUENCE OF PaepvcEntry .1.3.6.1.4.1.6321.1.2.3.4.8.10.1 |
paepvcEntryAn entry of paepvcTable. PaepvcEntry .1.3.6.1.4.1.6321.1.2.3.4.8.10.1.1 |
paepvcVpiVPI of the pvc.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.8.10.1.1.1 |
paepvcVciVCI of the pvc.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.8.10.1.1.2 |
paepvcPvidDefault VID of the pvc.ro VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.6321.1.2.3.4.8.10.1.1.3 |
paepvcEncapEncapsulation of the paepvc.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.8.10.1.1.4 |
paepvcPriority802.1p default priority of the pvc.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.8.10.1.1.5 |
paepvcProfileThe value of this object identifies the row in the ipqosProfileTable.rw DisplayString .1.3.6.1.4.1.6321.1.2.3.4.8.10.1.1.6 |
paepvcAcNameAccess concentrator name.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.4.8.10.1.1.7 |
paepvcServiceNameService name.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.4.8.10.1.1.8 |
paepvcHelloTimeThe system will close the PVC if there are not any LCP echo messages passed through
during the LCP hello time.rw INTEGER UNITS "second" .1.3.6.1.4.1.6321.1.2.3.4.8.10.1.1.9 |
paepvcRowStatusThis object is used to create a new row or delete an existing row in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.4.8.10.1.1.10 |
paepvcCvidDefault C-VID of the pvc.rw VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.6321.1.2.3.4.8.10.1.1.12 |
paepvcCPriority802.1p default C-priority of the pvc.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.8.10.1.1.13 |
tlspvc OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.4.8.11 |
tlspvcTableThis table includes Transparent LAN Service (TLS) PVC configuration. SEQUENCE OF TlspvcEntry .1.3.6.1.4.1.6321.1.2.3.4.8.11.1 |
tlspvcEntryAn entry of tlspvcTable. TlspvcEntry .1.3.6.1.4.1.6321.1.2.3.4.8.11.1.1 |
tlspvcVpiVPI of the pvc.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.8.11.1.1.1 |
tlspvcVciVCI of the pvc.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.8.11.1.1.2 |
tlspvcSvids-tag VLAN ID of the pvc.ro VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.6321.1.2.3.4.8.11.1.1.3 |
tlspvcEncapEncapsulation of the tlspvc.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.8.11.1.1.4 |
tlspvcSprioritys-tag priority of the pvc.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.8.11.1.1.5 |
tlspvcProfileThe value of this object identifies the row in the ipqosProfileTable.rw DisplayString .1.3.6.1.4.1.6321.1.2.3.4.8.11.1.1.6 |
tlspvcRowStatusThis object is used to create a new row or delete an existing row in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.4.8.11.1.1.7 |
dtpvc OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.4.8.13 |
dtpvcTableThis table includes Double Tagging (DT) PVC configuration. SEQUENCE OF DtpvcEntry .1.3.6.1.4.1.6321.1.2.3.4.8.13.1 |
dtpvcEntryAn entry of dtpvcTable. DtpvcEntry .1.3.6.1.4.1.6321.1.2.3.4.8.13.1.1 |
dtpvcVpiVPI of the pvc.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.8.13.1.1.1 |
dtpvcVciVCI of the pvc.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.8.13.1.1.2 |
dtpvcSvids-tag VLAN ID of the pvc.ro VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.6321.1.2.3.4.8.13.1.1.3 |
dtpvcSprioritys-tag priority of the pvc.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.8.13.1.1.4 |
dtpvcCvidc-tag VLAN ID of the pvc.rw VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.6321.1.2.3.4.8.13.1.1.5 |
dtpvcCpriorityc-tag priority of the pvc.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.8.13.1.1.6 |
dtpvcEncapEncapsulation of the dtpvc.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.8.13.1.1.7 |
dtpvcProfileThe value of this object identifies the row in the ipqosProfileTable.rw DisplayString .1.3.6.1.4.1.6321.1.2.3.4.8.13.1.1.8 |
dtpvcRowStatusThis object is used to create a new row or delete an existing row in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.4.8.13.1.1.9 |
dtpvcSuperChannelSpecified the configured DTPVC is a super channel.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.8.13.1.1.10 |
dtpvcAcNameAccess concentrator name for paepvc.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.4.8.13.1.1.11 |
dtpvcServiceNameService name for paepvc.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.4.8.13.1.1.12 |
dtpvcHelloTimeThe system will close the PVC if there are not any LCP echo messages passed through during the LCP hello time.rw INTEGER UNITS "second" .1.3.6.1.4.1.6321.1.2.3.4.8.13.1.1.13 |
dtpvcAutoEnable/disable auto detection for PPPoE/PPPoA encapsulation.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.8.13.1.1.14 |
dtpvcStateTableThis table show current DTPVC status. SEQUENCE OF DtpvcStateEntry .1.3.6.1.4.1.6321.1.2.3.4.8.13.2 |
dtpvcStateEntryAn entry in dtpvcStateTable. DtpvcStateEntry .1.3.6.1.4.1.6321.1.2.3.4.8.13.2.1 |
dtpvcStateVpiVPI of the dtpvc.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.8.13.2.1.1 |
dtpvcStateVciVCI of the dtpvc.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.8.13.2.1.2 |
dtpvcStateSvidDefault S-VID of the dtpvc.ro VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.6321.1.2.3.4.8.13.2.1.3 |
dtpvcStateSPriorityS-priority of the dtpvc.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.8.13.2.1.4 |
dtpvcStateCvidDefault C-VID of the dtpvc.ro VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.6321.1.2.3.4.8.13.2.1.5 |
dtpvcStateCPriorityC-priority of the dtpvc.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.8.13.2.1.6 |
dtpvcStateChannelTypeThe value of this object identifies the channel type at runtime.ro DisplayString .1.3.6.1.4.1.6321.1.2.3.4.8.13.2.1.8 |
dtpvcStateEncapThe value of this object identifies the channel encapsulation at runtime.ro DisplayString .1.3.6.1.4.1.6321.1.2.3.4.8.13.2.1.9 |
voipPort OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.4.8.14 |
voipSipLineConfTableThis table includes common attributes describing the VoIP line. SEQUENCE OF VoipSipLineConfEntry .1.3.6.1.4.1.6321.1.2.3.4.8.14.1 |
voipSipLineConfEntryAn entry in voipSipLineConfTable. VoipSipLineConfEntry .1.3.6.1.4.1.6321.1.2.3.4.8.14.1.1 |
voipSipLineConfSipProfileSIP profile name.rw OCTET STRING .1.3.6.1.4.1.6321.1.2.3.4.8.14.1.1.1 |
voipSipLineConfSipCallSvcProfileSIP call service profile name.rw OCTET STRING .1.3.6.1.4.1.6321.1.2.3.4.8.14.1.1.2 |
voipSipLineConfDspProfileDSP profile name.rw OCTET STRING .1.3.6.1.4.1.6321.1.2.3.4.8.14.1.1.3 |
portOperations OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.4.8.14.2 |
voipPortTargetThe managed object is used for identify the target on which
the port configuration should be performed. The target is encoded as:
Byte 1: 0, Reserved(chaises)
Byte 2~3: 0,0 Reserved(slot)
Byte 4: 0, Reserved
Byte 5~11:Each octet specifies a set of eight ports, with the first
octet specifying ports 1 through 8, etc.rw OCTET STRING .1.3.6.1.4.1.6321.1.2.3.4.8.14.2.1 |
voipPortOpsThe managed object is for VoIP configuration. When the EMS
wants to issue the desired operation, the EMS shall send SNMP-SET message to set
the corresponding bit value to be 1. The various bit positions are:
BIT 1: enable port
BIT 2: disable portrw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.8.14.2.2 |
voipPortTelTableThis table includes VoIP tel for the port. SEQUENCE OF VoipPortTelEntry .1.3.6.1.4.1.6321.1.2.3.4.8.14.3 |
voipPortTelEntryAn entry in voipPortTelTable. VoipPortTelEntry .1.3.6.1.4.1.6321.1.2.3.4.8.14.3.1 |
voipPortTelVoIP's telephone number of the specified port.rw DisplayString .1.3.6.1.4.1.6321.1.2.3.4.8.14.3.1.1 |
voipH248LineConfTableThis table includes common attributes describing the VoIP line. SEQUENCE OF VoipH248LineConfEntry .1.3.6.1.4.1.6321.1.2.3.4.8.14.4 |
voipH248LineConfEntryAn entry in voipH248LineConfTable. VoipH248LineConfEntry .1.3.6.1.4.1.6321.1.2.3.4.8.14.4.1 |
voipH248LineConfMgNameMG name.ro OCTET STRING .1.3.6.1.4.1.6321.1.2.3.4.8.14.4.1.1 |
voipH248LineConfDspProfileDSP profile name.rw OCTET STRING .1.3.6.1.4.1.6321.1.2.3.4.8.14.4.1.2 |
voipH248LineConfVBDProfileDSP profile name for Voice Band Data (FAX or Modem) mode.rw OCTET STRING .1.3.6.1.4.1.6321.1.2.3.4.8.14.4.1.3 |
voipPortH248TerminationTableThis table includes Termination name. SEQUENCE OF VoipPortH248TerminationEntry .1.3.6.1.4.1.6321.1.2.3.4.8.14.5 |
voipPortH248TerminationEntryAn entry in voipPortH248TerminationTable. VoipPortH248TerminationEntry .1.3.6.1.4.1.6321.1.2.3.4.8.14.5.1 |
voipPortH248TermNameTermination name of MG.ro OCTET STRING .1.3.6.1.4.1.6321.1.2.3.4.8.14.5.1.1 |
voipPortGainTableThis table includes Port Gain. SEQUENCE OF VoipPortGainEntry .1.3.6.1.4.1.6321.1.2.3.4.8.14.6 |
voipPortGainEntryAn entry in voipPortGainTable. VoipPortGainEntry .1.3.6.1.4.1.6321.1.2.3.4.8.14.6.1 |
voipPortTXGainTX Gain of the port, -200~200 in unit of 0.1dB.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.8.14.6.1.1 |
voipPortRXGainRX Gain of the port, -200~200 in unit of 0.1dB.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.8.14.6.1.2 |
voipPortSeizureModeTableThis table includes Port Seizure Mode. SEQUENCE OF VoipPortSeizureModeEntry .1.3.6.1.4.1.6321.1.2.3.4.8.14.7 |
voipPortSeizureModeEntryAn entry in voipPortSeizureModeTable. VoipPortSeizureModeEntry .1.3.6.1.4.1.6321.1.2.3.4.8.14.7.1 |
voipPortSeizureModePort Seizure Mode.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.8.14.7.1.1 |
voipPortSipAuthTableThis table includes VoIP port SIP authentication related configuration. SEQUENCE OF VoipPortSipAuthEntry .1.3.6.1.4.1.6321.1.2.3.4.8.14.8 |
voipPortSipAuthEntryAn entry in voipPortSipAuthTable. VoipPortSipAuthEntry .1.3.6.1.4.1.6321.1.2.3.4.8.14.8.1 |
voipPortSipAuthModeAuthentication mode for VoIP port SIP registration.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.8.14.8.1.1 |
voipPortSipAuthUsernameVoIP port SIP registration username.rw OCTET STRING .1.3.6.1.4.1.6321.1.2.3.4.8.14.8.1.2 |
voipPortSipAuthPasswdOnPassword is necessary or not for VoIP port SIP registration.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.8.14.8.1.3 |
voipPortSipAuthPasswdVoIP port SIP registration password.rw OCTET STRING .1.3.6.1.4.1.6321.1.2.3.4.8.14.8.1.4 |
voipPortSipCallsvcTableThis table includes VoIp port SIP call service related configuration. SEQUENCE OF VoipPortSipCallsvcEntry .1.3.6.1.4.1.6321.1.2.3.4.8.14.9 |
voipPortSipCallsvcEntryAn entry in voipPortSipCallsvcTable. VoipPortSipCallsvcEntry .1.3.6.1.4.1.6321.1.2.3.4.8.14.9.1 |
voipPortSipCallsvcModeVoIP port SIP call service mode.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.8.14.9.1.1 |
voipPortSipCallsvcStateMaskBit 1 callforward : call forward(Not supported)
Bit 2 callhold : call hold
Bit 3 callwait : call waiting
Bit 4 callreturn : call return(Not supported)
Bit 5 calltransfer : call transfer
Bit 6 clip : caller line identification presentation (Caller ID)
Bit 7 clir : caller line identification restriction
Bit 8 dnd : do not disturb
Bit 9 conference : native 3-way conferencerw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.8.14.9.1.2 |
voipPortSipCallsvcCPCOnPerform calling party control, or turn off.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.8.14.9.1.3 |
voipPortSipCallsvcCPCTimeoutVoIP port SIP delay hang up time of called party in seconds.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.8.14.9.1.4 |
snrMgn OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.4.8.15 |
snrMgnTableA table containing the per port SNR Margin configuration. SEQUENCE OF SnrMarginEntry .1.3.6.1.4.1.6321.1.2.3.4.8.15.1 |
snrMgnEntryAn entry of snrMgnTable. SnrMarginEntry .1.3.6.1.4.1.6321.1.2.3.4.8.15.1.1 |
snrMgnModeConfigure DSL SNR margin configuration mode of the specified ports.
Profile: the SNR margin configuration comes from DSL profile.
Line: the SNR margin configuration comes from line configuration.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.8.15.1.1.1 |
snrMgnUcTargetConfigured Target Signal/Noise Margin.
This is the Noise Margin the modem must achieve
with a BER of 10-7 or better to successfully complete
initialization.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.8.15.1.1.2 |
snrMgnUcMaxConfigured Maximum acceptable Signal/Noise Margin.
If the Noise Margin is above this the modem should
attempt to reduce its power output to optimize its
operation.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.8.15.1.1.3 |
snrMgnUcMinConfigured Minimum acceptable Signal/Noise Margin.
If the noise margin falls below this level, the modem
should attempt to increase its power output. If that
is not possible the modem will attempt to
re-initialize or shut down.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.8.15.1.1.4 |
snrMgnUcDownshiftConfigured Signal/Noise Margin for rate downshift.
If the noise margin falls below this level, the modem
should attempt to decrease its transmit rate. In
the case that RADSL mode is not present,
the value will be `0'.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.8.15.1.1.5 |
snrMgnUcUpshiftConfigured Signal/Noise Margin for rate upshift.
If the noise margin rises above this level, the modem
should attempt to increase its transmit rate. In
the case that RADSL is not present, the value will
be `0'.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.8.15.1.1.6 |
snrMgnUrTargetConfigured Target Signal/Noise Margin.
This is the Noise Margin the modem must achieve
with a BER of 10-7 or better to successfully complete
initialization.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.8.15.1.1.7 |
snrMgnUrMaxConfigured Maximum acceptable Signal/Noise Margin.
If the Noise Margin is above this the modem should
attempt to reduce its power output to optimize its
operation.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.8.15.1.1.8 |
snrMgnUrMinConfigured Minimum acceptable Signal/Noise Margin.
If the noise margin falls below this level, the modem
should attempt to increase its power output. If that
is not possible the modem will attempt to
re-initialize or shut down.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.8.15.1.1.9 |
snrMgnUrDownshiftConfigured Signal/Noise Margin for rate downshift.
If the noise margin falls below this level, the modem
should attempt to decrease its transmit rate.
In the case that RADSL mode is not present,
the value will be `0'.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.8.15.1.1.10 |
snrMgnUrUpshiftConfigured Signal/Noise Margin for rate upshift.
If the noise margin rises above this level, the modem
should attempt to increase its transmit rate.
In the case that RADSL is not present,
the value will be `0'.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.8.15.1.1.11 |
dslRate OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.4.8.16 |
dslRateTableA table containing the per port DSL Rate configuration. SEQUENCE OF DslRateEntry .1.3.6.1.4.1.6321.1.2.3.4.8.16.1 |
dslRateEntryAn entry of dslRateTable. DslRateEntry .1.3.6.1.4.1.6321.1.2.3.4.8.16.1.1 |
dslRateModeConfigure DSL Rate configuration mode of the specified ports.
Profile: the DSL Rate configuration comes from DSL profile.
Line: the DSL Rate configuration comes from line configuration.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.8.16.1.1.1 |
dslRateLatencyModeThe latency mode is fast or interleavero Enumeration .1.3.6.1.4.1.6321.1.2.3.4.8.16.1.1.2 |
dslRateXtucMaxInterleaveDelayConfigured maximum Interleave Delay for this channel.
Interleave delay applies only to the interleave channel
and defines the mapping (relative spacing) between
subsequent input bytes at the interleaver input and
their placement in the bit stream at the interleaver
output. Larger numbers provide greater separation
between consecutive input bytes in the output bit
stream allowing for improved impulse noise immunity
at the expense of payload latency.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.8.16.1.1.3 |
dslRateXtucMaxTxRateConfigured Maximum Transmit rate for `Fast' or `Interleave' channels,
in bps.rw Unsigned32 UNITS "kbps" .1.3.6.1.4.1.6321.1.2.3.4.8.16.1.1.4 |
dslRateXtucMinTxRateConfigured Minimum Transmit rate for `Fast' or `Interleave' channels,
in bpsrw Unsigned32 UNITS "kbps" .1.3.6.1.4.1.6321.1.2.3.4.8.16.1.1.5 |
dslRateXturMaxInterleaveDelayConfigured maximum Interleave Delay for this channel.
Interleave delay applies only to the interleave channel
and defines the mapping (relative spacing) between
subsequent input bytes at the interleaver input and
their placement in the bit stream at the interleaver
output. Larger numbers provide greater separation
between consecutive input bytes in the output bit
stream allowing for improved impulse noise immunity
at the expense of payload latencyrw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.8.16.1.1.6 |
dslRateXturMaxTxRateConfigured Target Signal/Noise Margin.
This is the Noise Margin the modem must achieve
with a BER of 10-7 or better to successfully complete
initialization.rw Unsigned32 UNITS "kbps" .1.3.6.1.4.1.6321.1.2.3.4.8.16.1.1.7 |
dslRateXturMinTxRateConfigured Maximum Transmit rate for `Fast' or `Interleave' channels,
in bps.rw Unsigned32 UNITS "kbps" .1.3.6.1.4.1.6321.1.2.3.4.8.16.1.1.8 |
gbond OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.4.8.51 |
gbondGroupTableA table containing the G.Bond configuration information for
each bonding group of the device. SEQUENCE OF GbondGroupEntry .1.3.6.1.4.1.6321.1.2.3.4.8.51.1 |
gbondGroupEntryAn entry of gbondTable. GbondGroupEntry .1.3.6.1.4.1.6321.1.2.3.4.8.51.1.1 |
gbondGroupNameAn administratively assigned string, which may be used to identify bonding group.ro OCTET STRING .1.3.6.1.4.1.6321.1.2.3.4.8.51.1.1.1 |
gbondGroupPortsThe set of ports which are currently assigned to the
bonding group of specified group name.
Byte 1: Reserved(chassis)
Byte 2~3: Reserved(slot)
Byte 4: Reserved
Byte 5~11:each octet specifies a set of eight ports, with the first
octet specifying ports 1 through 8, etc.rw OCTET STRING .1.3.6.1.4.1.6321.1.2.3.4.8.51.1.1.2 |
gbondGroupUpRateThe UP stream rate.ro Unsigned32 .1.3.6.1.4.1.6321.1.2.3.4.8.51.1.1.4 |
gbondGroupDownRateThe DOWN stream rate.ro Unsigned32 .1.3.6.1.4.1.6321.1.2.3.4.8.51.1.1.5 |
gbondGroupRowStatusThis object indicates the status of this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.4.8.51.1.1.6 |
profile OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.4.9 |
sraShiftMarginProfile OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.4.9.1 |
sraShiftMarginProfileTableThis table includes sra shift margin related configuration. SEQUENCE OF SraShiftMarginProfileEntry .1.3.6.1.4.1.6321.1.2.3.4.9.1.1 |
sraShiftMarginProfileEntryAn entry in ipqosProfileTable. SraShiftMarginProfileEntry .1.3.6.1.4.1.6321.1.2.3.4.9.1.1.1 |
sraShiftMarginProfileNameThis object identifies a row in this table.ro DisplayString .1.3.6.1.4.1.6321.1.2.3.4.9.1.1.1.1 |
xtucConfDownshiftSnrMgnSpecifies the downstream SRA Down Shift Margin in units of 0.25 dB, for a range of 0 to 31.75 dB. in unit of 1 db.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.9.1.1.1.2 |
xtucConfUpshiftSnrMgnSpecifies the downstream SRA UP Shift Margin in units of 0.25 dB, for a range of 0 to 31.75 dB. in unit of 1 db.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.9.1.1.1.3 |
xtucConfDownshiftTimeSpecifies the downstream SRA Down Shift time in units of 1 sec , for a range of 0 to 16383 sec. in unit of 1 sec.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.9.1.1.1.4 |
xtucConfUpshiftTimeSpecifies the downstream SRA UP Shift time in units of 1 sec , for a range of 0 to 16383 sec. in unit of 1 sec.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.9.1.1.1.5 |
xturConfDownshiftSnrMgnSpecifies the upstream SRA Down Shift Margin in units of 0.25 dB, for a range of 0 to 31.75 dB. in unit of 1 db.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.9.1.1.1.6 |
xturConfUpshiftSnrMgnSpecifies the upstream SRA UP Shift Margin in units of 0.25 dB, for a range of 0 to 31.75 dB. in unit of 1 db.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.9.1.1.1.7 |
xturConfDownshiftTimeSpecifies the upstream SRA Down Shift time in units of 1 sec , for a range of 0 to 16383 sec. in unit of 1 sec.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.9.1.1.1.8 |
xturConfUpshiftTimeSpecifies the upstream SRA UP Shift time in units of 1 sec , for a range of 0 to 16383 sec. in unit of 1 sec.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.9.1.1.1.9 |
sraShiftMarginProfileStatusThis object is used to create a new row or modify or delete an existing row in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.4.9.1.1.1.10 |
voipProfile OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.4.9.7 |
sipProfile OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.4.9.7.1 |
maxNumOfSipProfilesThe maximum number of SIP profiles supported by the system.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.9.7.1.1 |
sipProfileTableThis table includes SIP protocol related configuration. SEQUENCE OF SipProfileEntry .1.3.6.1.4.1.6321.1.2.3.4.9.7.1.2 |
sipProfileEntryAn entry in sipProfileTable. SipProfileEntry .1.3.6.1.4.1.6321.1.2.3.4.9.7.1.2.1 |
sipProfileNameThis object is used by the SIP profile table in order to identify a row of this table.ro DisplayString .1.3.6.1.4.1.6321.1.2.3.4.9.7.1.2.1.1 |
sipProfileSipSvrIP used for SIP registration or SIP domain name.rw OCTET STRING .1.3.6.1.4.1.6321.1.2.3.4.9.7.1.2.1.2 |
sipProfileRegSvrRegistration server IP or registration server domain name.rw OCTET STRING .1.3.6.1.4.1.6321.1.2.3.4.9.7.1.2.1.3 |
sipProfileProxySvrProxy server IP or proxy server doamin name.rw OCTET STRING .1.3.6.1.4.1.6321.1.2.3.4.9.7.1.2.1.4 |
sipProfileSipPortSIP UA port number.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.9.7.1.2.1.5 |
sipProfileRegSvrPortRegistration server port number.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.9.7.1.2.1.6 |
sipProfileProxySvrPortProxy server port number.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.9.7.1.2.1.7 |
sipProfileUriTyperw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.9.7.1.2.1.8 |
sipProfilePbit802.1p bit for SIP and RTP packet.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.9.7.1.2.1.9 |
sipProfileDscpDSCP for SIP and RTP packet.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.9.7.1.2.1.10 |
sipProfileKeepAliverw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.9.7.1.2.1.11 |
sipProfileSeSession expiration time in seconds.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.9.7.1.2.1.12 |
sipProfilePrackrw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.9.7.1.2.1.13 |
sipProfileRowStatusThis object is used to create a new row or delete an existing row in the table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.4.9.7.1.2.1.14 |
sipProfileRegExpireRegistration expiration time in seconds.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.9.7.1.2.1.15 |
maxNumOfSipCallSvcProfilesThe maximum number of SIP call service profiles supported by the system.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.9.7.1.3 |
sipCallSvcProfileTableThis table includes SIP call service related configuration. SEQUENCE OF SipCallSvcProfileEntry .1.3.6.1.4.1.6321.1.2.3.4.9.7.1.4 |
sipCallSvcProfileEntryAn entry in sipCallSvcProfileTable. SipCallSvcProfileEntry .1.3.6.1.4.1.6321.1.2.3.4.9.7.1.4.1 |
sipCallSvcProfileNameThis object is used by the SIP call service profile table in order to identify a row of this table.ro DisplayString .1.3.6.1.4.1.6321.1.2.3.4.9.7.1.4.1.1 |
sipCallSvcProfilePasswdOnPassword is necessary or not for SIP registration.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.9.7.1.4.1.2 |
sipCallSvcProfilePasswdSIP registration password.rw OCTET STRING .1.3.6.1.4.1.6321.1.2.3.4.9.7.1.4.1.3 |
sipCallSvcProfileNumberPlanOnrw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.9.7.1.4.1.4 |
sipCallSvcProfileNumberPlanCcCountry code, only digit 0..9 are allowed.rw OCTET STRING .1.3.6.1.4.1.6321.1.2.3.4.9.7.1.4.1.5 |
sipCallSvcProfileNumberPlanNdcNational destination code, only digit 0..9 are allowed.rw OCTET STRING .1.3.6.1.4.1.6321.1.2.3.4.9.7.1.4.1.6 |
sipCallSvcProfileNumberPlanTableNumbering plan table name.rw OCTET STRING .1.3.6.1.4.1.6321.1.2.3.4.9.7.1.4.1.7 |
sipCallSvcProfileStateMaskBit 1 callforward : call forward(Not supported)
Bit 2 callhold : call hold
Bit 3 callwait : call waiting
Bit 4 callreturn : call return(Not supported)
Bit 5 calltransfer : call transfer
Bit 6 clip : caller line identification presentation (Caller ID)
Bit 7 clir : caller line identification restriction
Bit 8 dnd : do not disturb
Bit 9 conference : native 3-way conferencerw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.9.7.1.4.1.8 |
sipCallSvcProfileDtmfdtmf bypass : bypass DTMF tone
dtmf rfc2833 : DTMF tone relay according to RFC2833
dtmf rfc2833like : DTMF tone relay by SIP INFO message, but RFC2833 payload
dtmf sipinfo : DTMF tone relay by SIP INFO messagerw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.9.7.1.4.1.9 |
sipCallSvcProfileFaxfax g711 : FAX service pass through by ITU-T G.711
fax t38 : FAX service by ITU-T T.38rw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.9.7.1.4.1.10 |
sipCallSvcProfileRowStatusThis object is used to create a new row or delete an existing row in the table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.4.9.7.1.4.1.11 |
sipCallSvcProfileFlashTypeflash invite : will send SIP INVITE message while press flash button.
flash bypass : flash event will be handled by current switch type specified in sipCallSvcProfileSwitchType.
flash rfc2833 : flash event will send by RTP event (16) defined in RFC 2833.
flash rfc2833like : flash event will send by SIP INFO message but RTP payload.
flash sipinfo-1 : flash event will be sent by SIP INFO signal=16 message.
flash sipinfo-2 : flash event will be sent by SIP INFO signal=hf message.
flash sipinfo-3 : flash event will be sent by SIP INFO signal=hook-flash message.
flash sipinfo-4 : flash event will be sent by SIP INFO plain text 'FLASH' message.
flash sipinfo-5 : flash event will be sent by multiple SIP INFO signal messages and content of signal messages come from sipCallSvcProfileFlashInfo.
flash sipinfo-6 : flash event will be sent by SIP INFO and payload is specified in sipCallSvcProfileFlashInfo.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.9.7.1.4.1.12 |
sipCallSvcProfileFlashInfoStrings carried in SIP INFO when specified in sipCallSvcProfileFlashType is sipinfo-5 and sipinfo-6.rw OCTET STRING .1.3.6.1.4.1.6321.1.2.3.4.9.7.1.4.1.13 |
sipCallSvcProfileSoftSwitchTypeSoftswitch type is configured to specify softswitch-dependent behavior,
currently only flash event is softswitch-dependent and should follow the softswitch type setting.
When configured the flash event to 'bypass', E5 will follow the softswitch type setting to
report hook flash event.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.9.7.1.4.1.14 |
sipCallSvcProfileCPCOnPerform calling party control, or turn off.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.9.7.1.4.1.15 |
sipCallSvcProfileCPCTimeoutDelay hang up time of called party in seconds.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.9.7.1.4.1.16 |
maxNumOfDspProfilesThe maximum number of DSP profiles supported by the system.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.9.7.2 |
dspProfileTableThis table includes DSP related configuration. SEQUENCE OF DspProfileEntry .1.3.6.1.4.1.6321.1.2.3.4.9.7.3 |
dspProfileEntryAn entry in dspProfileTable. DspProfileEntry .1.3.6.1.4.1.6321.1.2.3.4.9.7.3.1 |
dspProfileNameThis object is used by the DSP profile table in order to identify a row of this table.ro DisplayString .1.3.6.1.4.1.6321.1.2.3.4.9.7.3.1.1 |
dspProfileCodec0x01: g711a
0x02: g711mu
0x03: g723
0x04: g726-16
0x05: g726-24
0x06: g726-32
0x07: g726-40
0x08: g729ab
the value of dspProfileCodec is OCTET STRING, there are 8 Octets, each octect is
specified as 0x01, 0x03, 0x02, 0x07,0x00, 0x00, 0x00, 0x00 (to specify different
CODE in priority) specify as: g711a, g723, g711mu, g726-40rw OCTET STRING .1.3.6.1.4.1.6321.1.2.3.4.9.7.3.1.2 |
dspProfilePlayBufferMinDelayPlay buffer minimum delay in milliseconds.
It should be less than or equal to dspProfilePlayBufferMaxDelay.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.9.7.3.1.3 |
dspProfilePlayBufferMaxDelayPlay buffer maximum delay in milliseconds.
It should be greater than or equal to dspProfilePlayBufferMinDelay.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.9.7.3.1.4 |
dspProfileEchoTailEcho cancellation echo tail period in milliseconds.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.9.7.3.1.5 |
dspProfileRowStatusThis object is used to create a new row or delete an existing row in the table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.4.9.7.3.1.6 |
dspProfileG711VpiVoice Packetization Interval(VPI) of codec G.711 in milliseconds.
The values are 10, 20, 30, 40rw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.9.7.3.1.7 |
dspProfileG723VpiVoice Packetization Interval(VPI) of G.723 codec in milliseconds.
The values are 30,60rw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.9.7.3.1.8 |
dspProfileG726VpiVoice Packetization Interval(VPI) of G.726 codec in milliseconds.
The values are 10, 20, 30, 40rw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.9.7.3.1.9 |
dspProfileG729VpiVoice Packetization Interval(VPI) of G.729 codec in milliseconds.
The values are 10, 20, 30, 40, 50, 60rw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.9.7.3.1.10 |
h248Profile OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.4.9.7.4 |
maxNumOfH248ProfilesThe maximum number of H248 profiles supported by the system.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.9.7.4.1 |
h248ProfileTableThis table includes H248 profile related configuration. SEQUENCE OF H248ProfileEntry .1.3.6.1.4.1.6321.1.2.3.4.9.7.4.2 |
h248ProfileEntryAn entry in h248ProfileTable. H248ProfileEntry .1.3.6.1.4.1.6321.1.2.3.4.9.7.4.2.1 |
h248ProfileNameThis object is used by the H248 profile table in order to identify a row of this table.ro DisplayString .1.3.6.1.4.1.6321.1.2.3.4.9.7.4.2.1.1 |
h248ProfileMgcSvrMGC IP or MGC doamin name.rw OCTET STRING .1.3.6.1.4.1.6321.1.2.3.4.9.7.4.2.1.2 |
h248ProfileMgcPortMGC port number.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.9.7.4.2.1.3 |
h248ProfileMgc2OnSecondary MGC on/off.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.9.7.4.2.1.4 |
h248ProfileMgc2SvrSecondary MGC IP or MGC doamin name. h248ProfileMgc2On needs to turn on if user want to set Secondary MGC IP or domain name.rw OCTET STRING .1.3.6.1.4.1.6321.1.2.3.4.9.7.4.2.1.5 |
h248ProfileMgc2PortSecondary MGC port number. h248ProfileMgc2On needs to turn on if user want to set Secondary MGC port number.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.9.7.4.2.1.6 |
h248ProfileTransportTransport procotol used by the H.248 protocol stack.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.9.7.4.2.1.7 |
h248ProfileEncodeEncoding type used by the H.248 protocol stackrw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.9.7.4.2.1.8 |
h248ProfilePbit802.1p bit for H.248 packet.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.9.7.4.2.1.9 |
h248ProfileDscpDSCP for H.248 packet.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.9.7.4.2.1.10 |
h248ProfileRowStatusThis object is used to create a new row or delete an existing row in the table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.4.9.7.4.2.1.11 |
h248ProfileVbdVBD mode support on/offrw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.9.7.4.2.1.12 |
h248ProfileEphemeralPrefixEphemeral Termination Prefixrw DisplayString .1.3.6.1.4.1.6321.1.2.3.4.9.7.4.2.1.14 |
h248ProfileSoftswitchSoftswitch typerw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.9.7.4.2.1.15 |
h248ProfileForceVerForce using H.248 version 1rw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.9.7.4.2.1.16 |
h248ProfileStartRTPPortStart of RTP port number.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.9.7.4.2.1.17 |
h248ProfileEndRTPPortEnd of RTP port number.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.9.7.4.2.1.18 |
h248ProfileEphemeralStartNumberEphemeral termination suffix start number, up to 15 digits.rw OCTET STRING .1.3.6.1.4.1.6321.1.2.3.4.9.7.4.2.1.19 |
h248ProfileEphemeralSuffixLengthEphemeral termination suffix number length , padding zero at the front if not long enough.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.9.7.4.2.1.20 |
h248ProfilePhysicalPrefixPhysical Termination Prefix.rw DisplayString .1.3.6.1.4.1.6321.1.2.3.4.9.7.4.2.1.21 |
h248ProfilePhysicalStartNumberPhysical termination suffix start number, up to 15 digits.rw OCTET STRING .1.3.6.1.4.1.6321.1.2.3.4.9.7.4.2.1.22 |
h248ProfilePhysicalSuffixLengthPhysical termination suffix number length , padding zero at the front if not long enough.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.9.7.4.2.1.23 |
h248ProfileRfc2833ModeRFC2833 mode support.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.9.7.4.2.1.24 |
h248ProfileRfc2833ModePayloadTypePayload type of RFC2833 mode.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.9.7.4.2.1.25 |
ipqosProfile OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.4.9.8 |
maxNumOfIpqosProfilesThe maximum number of IPQOS profiles supported by the system.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.9.8.1 |
ipqosProfileTableThis table includes IPQOS related configuration. SEQUENCE OF IpqosProfileEntry .1.3.6.1.4.1.6321.1.2.3.4.9.8.2 |
ipqosProfileEntryAn entry in ipqosProfileTable. IpqosProfileEntry .1.3.6.1.4.1.6321.1.2.3.4.9.8.2.1 |
ipqosProfileNameThis object is used by the IPQOS profile table in order to identify a row of this table.ro DisplayString .1.3.6.1.4.1.6321.1.2.3.4.9.8.2.1.1 |
ipqosProfileNumOfQueueThe number of IPQOS queues.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.9.8.2.1.2 |
ipqosProfileRowStatusThis object is used to create a new row or delete an existing row in the table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.4.9.8.2.1.3 |
ipqosProfileQueueTableThis table includes IPQOS queue related configuration. SEQUENCE OF IpqosProfileQueueEntry .1.3.6.1.4.1.6321.1.2.3.4.9.8.3 |
ipqosProfileQueueEntryAn entry in ipqosProfileQueueTable. IpqosProfileQueueEntry .1.3.6.1.4.1.6321.1.2.3.4.9.8.3.1 |
ipqosProfileQueueIndexIPQOS queue index.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.9.8.3.1.1 |
ipqosProfileQueuePIRPeak rate.(multiple of 256)rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.9.8.3.1.2 |
ipqosProfileQueueCIRCommited rate.(multiple of 256)rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.9.8.3.1.3 |
ipqosProfileQueuePBSPeak burst size.(mutiple of 256)rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.9.8.3.1.4 |
ipqosProfileQueueCBSCommited burst size.(mutiple of 256)rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.9.8.3.1.5 |
ipqosProfileQueueLevelQueue level.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.9.8.3.1.6 |
ipqosProfileQueueWeightQueue weight.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.9.8.3.1.7 |
switch OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.4.10 |
dot3ad OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.4.10.6 |
dot3adTableThe table contains 802.3ad configuration. SEQUENCE OF Dot3adEntry .1.3.6.1.4.1.6321.1.2.3.4.10.6.1 |
dot3adEntry Dot3adEntry .1.3.6.1.4.1.6321.1.2.3.4.10.6.1.1 |
dot3adGroupIdGroup ID 1 for the subtending group and 2 for the uplink group.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.10.6.1.1.1 |
dot3adEnableEnable/disable 802.3ad function.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.10.6.1.1.2 |
lacpPriorityLACP system priority.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.10.6.2 |
lacpTimeoutThe time interval to exchange LACP packets in order to check that the peer port
in the trunk group is still up.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.10.6.3 |
portTrunkingTableThe table contains current status of port trunking. SEQUENCE OF PortTrunkingEntry .1.3.6.1.4.1.6321.1.2.3.4.10.6.4 |
portTrunkingEntry PortTrunkingEntry .1.3.6.1.4.1.6321.1.2.3.4.10.6.4.1 |
portTrunkingGroupIdGroup ID 1 for the subtending group and 2 for the uplink group.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.10.6.4.1.1 |
portTrunkingStatusPort trunking status.ro Enumeration .1.3.6.1.4.1.6321.1.2.3.4.10.6.4.1.2 |
portTrunkingPortListThe port list which actually joins the trunking group.ro PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.6321.1.2.3.4.10.6.4.1.3 |
dscp OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.4.10.10 |
dscpMappingTableThe table contains DSCP mapping configuration for the adsl ports. SEQUENCE OF DscpMappingEntry .1.3.6.1.4.1.6321.1.2.3.4.10.10.1 |
dscpMappingEntryAn entry of dscpMappingTable. DscpMappingEntry .1.3.6.1.4.1.6321.1.2.3.4.10.10.1.1 |
dscpSrcCodePointThe DSCP source code point used for mapping.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.10.10.1.1.1 |
dscpMapPriorityThe mapping p bits that will replace the source p bits in the incoming packet.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.10.10.1.1.3 |
dscpPortTableThe table contains DSCP mapping configuration for the adsl ports. SEQUENCE OF DscpPortEntry .1.3.6.1.4.1.6321.1.2.3.4.10.10.2 |
dscpPortEntryAn entry of dscpPortTable. DscpPortEntry .1.3.6.1.4.1.6321.1.2.3.4.10.10.2.1 |
dscpStatusEnableThe DSCP port status.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.10.10.2.1.1 |
vlanIsolation OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.4.10.12 |
vlanIsolationTableA table contains configuration of isolated VLAN. SEQUENCE OF VlanIsolationEntry .1.3.6.1.4.1.6321.1.2.3.4.10.12.1 |
vlanIsolationEntryAn entry of vlanIsolationTable. VlanIsolationEntry .1.3.6.1.4.1.6321.1.2.3.4.10.12.1.1 |
vlanIsolationRowStatusRow status of the table used to create/delete an entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.4.10.12.1.1.1 |
enetMtu OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.4.10.13 |
enetMtuEntrySets the MTU size for layer 2 frame, size from 1526 to 1532, default value is 1526.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.10.13.1 |
tpid OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.4.10.14 |
tpidEntrySets TPID(Tag Protocol Identifier) of tagged frame, 0~FFFF.rw Unsigned32 .1.3.6.1.4.1.6321.1.2.3.4.10.14.1 |
cfm OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.4.10.15 |
cfmLoopbackPortTableA table that contains CFM information. SEQUENCE OF CfmLoopbackPortEntry .1.3.6.1.4.1.6321.1.2.3.4.10.15.1 |
cfmLoopbackPortEntryAn entry in cfmLoopbackPortTable. CfmLoopbackPortEntry .1.3.6.1.4.1.6321.1.2.3.4.10.15.1.1 |
cfmLoopbackPortStateCFM loopback enable/disable on the port.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.10.15.1.1.1 |
cfmMIPTable SEQUENCE OF CfmMIPEntry .1.3.6.1.4.1.6321.1.2.3.4.10.15.2 |
cfmMIPEntryAn entry in cfmMIPTable. CfmMIPEntry .1.3.6.1.4.1.6321.1.2.3.4.10.15.2.1 |
cfmPort INTEGER .1.3.6.1.4.1.6321.1.2.3.4.10.15.2.1.3 |
cfmMIPRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.4.10.15.2.1.4 |
cfmMIPMacAddrCFM MIP mac addressrw PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.4.10.15.2.1.5 |
cfmActionEnableStatusCFM Action enable status for the CO devicerw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.10.15.3 |
cfmModeCFM follow standard moderw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.10.15.4 |
cfmLbmTimeoutCFM LBM timeout, 100-86400 msrw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.10.15.5 |
cfmLbmDataTlvLengthCFM LBM data tlv length, 0-1400 bytesrw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.10.15.6 |
cfmLbrTableA table that contains CFM LBR results. SEQUENCE OF CfmLbrEntry .1.3.6.1.4.1.6321.1.2.3.4.10.15.7 |
cfmLbrEntryAn entry in cfmLbrTable. CfmLbrEntry .1.3.6.1.4.1.6321.1.2.3.4.10.15.7.1 |
cfmLbmIndexCFM lbm index.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.10.15.7.1.1 |
cfmLbrIndexCFM lbr index.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.10.15.7.1.2 |
cfmLbrSrcMacCFM lbr source address.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.4.10.15.7.1.3 |
cfmLbrStatusCFM lbr status.ro Enumeration .1.3.6.1.4.1.6321.1.2.3.4.10.15.7.1.4 |
cfmLbrRttCFM lbr rtt in ms.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.10.15.7.1.5 |
dhcp OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.4.10.51 |
dhcpRelay82TableA table that contains DHCP Relay configuration. SEQUENCE OF DhcpRelay82Entry .1.3.6.1.4.1.6321.1.2.3.4.10.51.2 |
dhcpRelay82EntryThe entry of DHCP Relay table. DhcpRelay82Entry .1.3.6.1.4.1.6321.1.2.3.4.10.51.2.1 |
dhcpRelay82PrimaryServerThe IP address of the DHCP Relay primary server.rw IpAddress .1.3.6.1.4.1.6321.1.2.3.4.10.51.2.1.1 |
dhcpRelay82SecondaryServerThe IP address of the DHCP Relay secondary server.rw IpAddress .1.3.6.1.4.1.6321.1.2.3.4.10.51.2.1.2 |
dhcpRelay82ActiveServerThe current active DHCP Relay server.ro Enumeration .1.3.6.1.4.1.6321.1.2.3.4.10.51.2.1.3 |
dhcpRelay82EnableEnable/disable DHCP relay and Option82 function.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.10.51.2.1.4 |
dhcpRelay82InfoUser specific Option82 information.rw DisplayString .1.3.6.1.4.1.6321.1.2.3.4.10.51.2.1.5 |
dhcpRelay82RelayModeDHCP relay mode.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.10.51.2.1.6 |
dhcpRelay82Suboption2EnableEnable/disable Option 82 sub-option 2.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.10.51.2.1.8 |
dhcpRelay82Suboption2InfoUser specified information for Option 82 sub-option 2.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.4.10.51.2.1.9 |
dhcpRelay82EntryEnableEnable/disable DHCP Relayrw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.10.51.2.1.10 |
dhcpRelay82EntryOptionModeOption82 format.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.10.51.2.1.11 |
dhcpRelay82VlanIpThe IP address of the DHCP Relay interface for this VLAN.rw IpAddress .1.3.6.1.4.1.6321.1.2.3.4.10.51.2.1.12 |
dhcpRelay82VlanMaskThe network mask of the DHCP Relay interface for this VLAN.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.10.51.2.1.13 |
dhcpRelay82VlanGatewayThe gateway of the DHCP Relay interface for this VLAN.rw IpAddress .1.3.6.1.4.1.6321.1.2.3.4.10.51.2.1.14 |
dhcpRelay82ThirdServerThe IP address of the DHCP Relay third server.rw IpAddress .1.3.6.1.4.1.6321.1.2.3.4.10.51.2.1.15 |
dhcpRelay82FourthServerThe IP address of the DHCP Relay fourth server.rw IpAddress .1.3.6.1.4.1.6321.1.2.3.4.10.51.2.1.16 |
dhcpRelay82FifthServerThe IP address of the DHCP Relay fifth server.rw IpAddress .1.3.6.1.4.1.6321.1.2.3.4.10.51.2.1.17 |
dhcpRelay82ServerVidThe VID of the DHCP Relay server for this VLAN.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.10.51.2.1.18 |
dhcpRelayTest OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.4.10.51.8 |
dhcpRelayTestVidSetting the VID of the test server.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.10.51.8.1 |
dhcpRelayTestIpSetting the IP of the test server.rw IpAddress .1.3.6.1.4.1.6321.1.2.3.4.10.51.8.2 |
dhcpRelayTestOpsSet the object to 1 to test DHCP server.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.10.51.8.3 |
dhcpRelayTestStatusDisplay testing server status.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.4.10.51.8.4 |
dhcpRelayArp OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.4.10.51.9 |
dhcpRelayArpShowTableThe table displays DHCP ARP. SEQUENCE OF DhcpRelayArpShowEntry .1.3.6.1.4.1.6321.1.2.3.4.10.51.9.1 |
dhcpRelayArpShowEntryAn entry of dhcpRelayArpShowTable. DhcpRelayArpShowEntry .1.3.6.1.4.1.6321.1.2.3.4.10.51.9.1.1 |
dhcpRelayArpShowVidDisplay the VID of the DHCP ARP entry.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.10.51.9.1.1.1 |
dhcpRelayArpShowIpDisplay the IP of the DHCP ARP entry.ro IpAddress .1.3.6.1.4.1.6321.1.2.3.4.10.51.9.1.1.2 |
dhcpRelayArpShowMacDisplay the MAC of the DHCP ARP entry.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.4.10.51.9.1.1.3 |
dhcpRelayArpFlushOpsSet the object to 1 to start flushing.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.10.51.9.2 |
macfilter OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.4.10.53 |
macFilterPortTableThis table includes the status of mac filtering for each port. SEQUENCE OF MacFilterPortEntry .1.3.6.1.4.1.6321.1.2.3.4.10.53.1 |
macFilterPortEntryAn entry in macFilterPortTable. MacFilterPortEntry .1.3.6.1.4.1.6321.1.2.3.4.10.53.1.1 |
macFilterPortEnableEnable/disable MAC filtering for the port.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.10.53.1.1.1 |
macFilterPortMacCountThe total number of MAC addresses allowed for the port.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.10.53.1.1.2 |
macFilterPortFilterModeThe mac filter mode (accept or deny) for the port.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.10.53.1.1.3 |
maxNumOfMacFiltersInSystemThe max number of mac filters supported in the system.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.10.53.2 |
maxNumOfMacFiltersPerPortThe max number of mac filters supported per port.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.10.53.3 |
currNumOfMacFiltersInSystemThe current number of mac filters in the system.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.10.53.4 |
macFilterTableA table that contains the mac filter addresses. SEQUENCE OF MacFilterEntry .1.3.6.1.4.1.6321.1.2.3.4.10.53.5 |
macFilterEntryThe entry of macFilterTable. MacFilterEntry .1.3.6.1.4.1.6321.1.2.3.4.10.53.5.1 |
macFilterAddrThe mac address which can pass through or be rejected from the port.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.4.10.53.5.1.1 |
macFilterRowStatusThe row status of the entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.4.10.53.5.1.2 |
macfilterBatchSet OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.4.10.53.6 |
macfilterTargetThis managed object is used for identify the target on which
the port configuration should be performed. The target is encoded as:
Byte 1: 0, Reserved(chassis)
Byte 2~3: 0, Reserved(slot)
Byte 4: 0, reserved
Byte 5~11:each octet specifies a set of eight ports, with the first
octet specifying ports 1 through 8, etc.rw OCTET STRING .1.3.6.1.4.1.6321.1.2.3.4.10.53.6.1 |
macfilterOpsThe corresponding bit is set to 1 to start the operation.
The various bit positions are:
BIT 1: enable mac filter
BIT 2: enable mac count filter
BIT 3: disable mac filter
BIT 4: set mac count
BIT 5: disable mac count filter.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.10.53.6.2 |
macFilterMacCountForBatchSetThe total number of MAC addresses allowed for a port.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.10.53.6.3 |
ouiFilterTableA table that contains the OUI filter addresses. SEQUENCE OF OuiFilterEntry .1.3.6.1.4.1.6321.1.2.3.4.10.53.7 |
ouiFilterEntryThe entry of ouiFilterTable. OuiFilterEntry .1.3.6.1.4.1.6321.1.2.3.4.10.53.7.1 |
ouiFilterAddrThe first three bytes of the mac address which can pass through or be rejected from the port.ro OCTET STRING .1.3.6.1.4.1.6321.1.2.3.4.10.53.7.1.1 |
ouiFilterRowStatusThe row status of the entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.4.10.53.7.1.2 |
maxNumOfOuiFiltersPerPortThe max number of OUI filters supported per port.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.10.53.8 |
ouiFilterPortTableThis table includes the status of oui filtering for each port. SEQUENCE OF OuiFilterPortEntry .1.3.6.1.4.1.6321.1.2.3.4.10.53.9 |
ouiFilterPortEntryAn entry in macFilterPortTable. OuiFilterPortEntry .1.3.6.1.4.1.6321.1.2.3.4.10.53.9.1 |
ouiFilterPortEnableEnable/disable oui filtering for the port.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.10.53.9.1.1 |
ouiFilterPortFilterModeThe oui filter mode (accept or deny) for the port.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.10.53.9.1.2 |
dhcpSnoop OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.4.10.55 |
dhcpSnoopPortTableThis table includes DHCP snooping enable/disable for each port. SEQUENCE OF DhcpSnoopPortEntry .1.3.6.1.4.1.6321.1.2.3.4.10.55.1 |
dhcpSnoopPortEntryAn entry of dhcpSnoopPortTable. DhcpSnoopPortEntry .1.3.6.1.4.1.6321.1.2.3.4.10.55.1.1 |
dhcpSnoopEnableEnable/disable DHCP snooping for a port.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.10.55.1.1.1 |
dhcpSnoopMaxcntSet the max entries of the DHCP ARP table.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.10.55.1.1.2 |
dhcpSnoopSmacverifyEnableEnable/disable DHCP source MAC verify for a port.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.10.55.1.1.3 |
dhcpSnoopTargetThis managed object is used for identify the target on which
the operation should be performed. The target is encoded as:
Byte 1: the octet specifies a set of eight chassis, chassis 0 through 7
Byte 2~3: each octet specifies a set of eight slots, with the
first octet specifying slots 1 through 8 and the second
octet specifying slots 9 through 16.
Byte 4: reserved
Byte 5~11:each octet specifies a set of eight ports, with the first
octet specifying ports 1 through 8, etc.rw OCTET STRING .1.3.6.1.4.1.6321.1.2.3.4.10.55.2 |
dhcpSnoopOpsThe corresponding bit is set to 1 to start the operation.
The various bit positions are:
BIT 1: DHCP snooping table flush.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.10.55.3 |
dhcpStaticTableThis table defines DHCP static IP addresses. SEQUENCE OF DhcpStaticEntry .1.3.6.1.4.1.6321.1.2.3.4.10.55.4 |
dhcpStaticEntryAn entry of dhcpStaticTable. DhcpStaticEntry .1.3.6.1.4.1.6321.1.2.3.4.10.55.4.1 |
dhcpStaticIpAddrThe IP address which can pass through the port.ro IpAddress .1.3.6.1.4.1.6321.1.2.3.4.10.55.4.1.1 |
dhcpStaticRowStatusRow status of the table entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.4.10.55.4.1.2 |
maxNumOfDhcpStaticIpThe maximum number of DHCP static IP addresses which can be created for a port.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.10.55.5 |
dhcpSnoopMaxcntModeWhen DHCP snooping table is full, new DHCP lease will replace first one in option 0 or will be dropped in option 1.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.10.55.6 |
acl OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.4.10.56 |
aclSetTableaclsetTable. SEQUENCE OF AclSetEntry .1.3.6.1.4.1.6321.1.2.3.4.10.56.1 |
aclSetEntryAn entry of aclSetTable. AclSetEntry .1.3.6.1.4.1.6321.1.2.3.4.10.56.1.1 |
aclSetVpiVPI valuero INTEGER .1.3.6.1.4.1.6321.1.2.3.4.10.56.1.1.1 |
aclSetVciVCI valuero INTEGER .1.3.6.1.4.1.6321.1.2.3.4.10.56.1.1.2 |
aclSetProfileNameACL Profile namero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.4.10.56.1.1.3 |
aclSetRowStatusRowStatus of aclSetEntryrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.4.10.56.1.1.4 |
aclProfileTableaclProfileTable. SEQUENCE OF AclProfileEntry .1.3.6.1.4.1.6321.1.2.3.4.10.56.2 |
aclProfileEntryAn entry of aclProfileTable. AclProfileEntry .1.3.6.1.4.1.6321.1.2.3.4.10.56.2.1 |
aclProfileRuleNameProfile rule namero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.4.10.56.2.1.1 |
aclProfileRuleNumberThe managed object is for acl profile rule configuration.
etype <etype> vlan <vid> (1),
etype <etype> smac <mac> (2),
etype <etype> dmac <mac> (3),
vlan <vid> smac <mac> (4),
vlan <vid> dmac <mac> (5),
smac <mac> dmac <mac> (6),
vlan <vid> priority <priority> (7),
etype <etype> (8),
vlan <vid> (9),
smac <mac> (10),
dmac <mac> (11),
priority <priority> (12),
protocol <protocol> (13),
vlan <vid> sip <ip> (14),
vlan <vid> dip <ip> (15),
vlan <vid> sport tcp|udp <port> (16),
vlan <vid> dport tcp|udp <port> (17)rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.10.56.2.1.2 |
aclProfileActionNumberProfile action number.
Bit 1: rate
Bit 2: rvlan
Bit 3: rpri
Bit 4: deny
Bit 1, Bit 2 & Bit 3 can multiple selection.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.10.56.2.1.3 |
aclProfileRuleParamMaskProfile rule parameter mask.
BIT 1: srcip <ip>/<mask>
BIT 2: dstip <ip>/<mask>
BIT 3: tos <stos> <etos>
BIT 4: srcport <sport> <eport>
BIT 5: dstport <sport> <eport>rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.10.56.2.1.4 |
aclProfileRuleEtypeProfile rule etyperw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.10.56.2.1.5 |
aclProfileRuleVidProfile rule vidrw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.10.56.2.1.6 |
aclProfileRuleSmacProfile rule source MACrw PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.4.10.56.2.1.7 |
aclProfileRuleDmacProfile rule destination MACrw PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.4.10.56.2.1.8 |
aclProfileRulePriorityProfile rule priorityrw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.10.56.2.1.9 |
aclProfileRuleProtocolProfile rule protocol.
icmp(1),igmp(2),ip(4),tcp(6),
udp(17),gre(47),ospf(89),
other ptyperw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.10.56.2.1.10 |
aclProfileActionRateProfile action to replace to this raterw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.10.56.2.1.21 |
aclProfileActionrvlanProfile action to replace to this vlanrw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.10.56.2.1.22 |
aclProfileActionrpriProfile action to replace to this priorityrw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.10.56.2.1.23 |
aclProfileRowStatusThe row status of the entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.4.10.56.2.1.24 |
aclProfileRuleSipSource IP.rw IpAddress .1.3.6.1.4.1.6321.1.2.3.4.10.56.2.1.25 |
aclProfileRuleDipDestination IP.rw IpAddress .1.3.6.1.4.1.6321.1.2.3.4.10.56.2.1.26 |
aclProfileRuleSportSource port.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.10.56.2.1.27 |
aclProfileRuleDportDestination port.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.10.56.2.1.28 |
pppoeAgent OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.4.10.57 |
pppoeAgentTableA table that contains PPPoE intermediate agent configuration. SEQUENCE OF PppoeAgentEntry .1.3.6.1.4.1.6321.1.2.3.4.10.57.1 |
pppoeAgentEntryAn entry of pppoeAgentTable. PppoeAgentEntry .1.3.6.1.4.1.6321.1.2.3.4.10.57.1.1 |
pppoeAgentEnableEnable/disable PppoE intermediate agent function.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.10.57.1.1.1 |
pppoeAgentInfoUser specific Option82 information.rw DisplayString .1.3.6.1.4.1.6321.1.2.3.4.10.57.1.1.2 |
pppoeAgentRowStatusRow status of the table entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.4.10.57.1.1.3 |
pppoeAgentOptionModeOption82 format.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.10.57.1.1.4 |
maxNumOfPppoeAgentConfThe maximum number of rows that can be created in pppoeAgentTable.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.10.57.2 |
n1mac OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.4.10.58 |
n1macReplaceMacThis MAC address will be used to replace client's MAC address.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.4.10.58.1 |
n1macPortTableThe table contains N to 1 MAC configuration for DSL ports. SEQUENCE OF N1macPortEntry .1.3.6.1.4.1.6321.1.2.3.4.10.58.2 |
n1macPortEntryAn entry of n1macPortTable. N1macPortEntry .1.3.6.1.4.1.6321.1.2.3.4.10.58.2.1 |
n1macStatusEnableThe port status of n1mac function.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.10.58.2.1.1 |
macff OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.4.10.60 |
macFfTableA table that contains MAC Force Forwarding configuration. SEQUENCE OF MacFfEntry .1.3.6.1.4.1.6321.1.2.3.4.10.60.1 |
macFfEntryAn entry of macFfTable. MacFfEntry .1.3.6.1.4.1.6321.1.2.3.4.10.60.1.1 |
macFfIndexIndex of the MACFF.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.10.60.1.1.1 |
macFfVidThe VLAN-ID refering to this AR/AS.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.10.60.1.1.2 |
macFfArIPIP of this AR/ASrw IpAddress .1.3.6.1.4.1.6321.1.2.3.4.10.60.1.1.3 |
macFfSrcIPThe source IP address of the MACFF.rw IpAddress .1.3.6.1.4.1.6321.1.2.3.4.10.60.1.1.4 |
macFfSrcMaskThe subnet mask of source IP mask.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.10.60.1.1.5 |
macFfRowStatusThe row status of the MacFfEntry entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.4.10.60.1.1.6 |
macFfArpFlushSet the object to 1 to flush mac table.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.10.60.3 |
maxNumOfMacFfVlanInSystemThe max number of macff Vlans supported in the system.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.10.60.4 |
macFfVlanTableA table that contains MAC Force Forwarding Vlan configuration. SEQUENCE OF MacFfVlanEntry .1.3.6.1.4.1.6321.1.2.3.4.10.60.5 |
macFfVlanEntryAn entry of macFfVlanTable. MacFfVlanEntry .1.3.6.1.4.1.6321.1.2.3.4.10.60.5.1 |
macFfVlanRowstatusRow status of the table used to create/delete an entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.4.10.60.5.1.1 |
macFfStaticIPTable SEQUENCE OF MacFfStaticIPEntry .1.3.6.1.4.1.6321.1.2.3.4.10.60.6 |
macFfStaticIPEntryAn entry of macFfTable. MacFfStaticIPEntry .1.3.6.1.4.1.6321.1.2.3.4.10.60.6.1 |
macFfStaticIPPortThe port number, 1 ~ 48.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.10.60.6.1.1 |
macFfStaticIPVidVLAN ID of the IP range, 1 ~ 4094, the vid should be enable the MACFF function first.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.10.60.6.1.2 |
macFfstaticIPThe specified IP range.ro IpAddress .1.3.6.1.4.1.6321.1.2.3.4.10.60.6.1.3 |
macFfStaticIPMaskMask_bits is 24 .. 32.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.10.60.6.1.4 |
macFfStaticIPRowStatusThe row status used to configure the table entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.4.10.60.6.1.5 |
macFfServerMacTable SEQUENCE OF MacFfServerMacEntry .1.3.6.1.4.1.6321.1.2.3.4.10.60.7 |
macFfServerMacEntryAn entry of macFfTable. MacFfServerMacEntry .1.3.6.1.4.1.6321.1.2.3.4.10.60.7.1 |
macFfServerMacVidVLAN ID of the IP range, 1 ~ 4094, the vid should be enable the MACFF function first.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.10.60.7.1.1 |
macFfServerMacAddrThe mac address.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.4.10.60.7.1.2 |
macFfServerMacRowStatusThe row status used to configure the table entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.4.10.60.7.1.3 |
sys OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.4.11 |
timeSetup OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.4.11.4 |
dayLightSaving OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.4.11.4.7 |
dayLightSavingAdminStatusrw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.11.4.7.1 |
dayLightSavingStartTime OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.4.11.4.7.2 |
dayLightSavingStartMonthrw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.11.4.7.2.1 |
dayLightSavingStartWeekrw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.11.4.7.2.2 |
dayLightSavingStartWdayrw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.11.4.7.2.3 |
dayLightSavingStartHour1h 01h00,
2h 02h00
3h 03h00
4h 04h00
5h 05h00
6h 06h00
7h 07h00
8h 08h00
9h 09h00
10h 10h00
11h 11h00
12h 12h00
13h 13h00
14h 14h00
15h 15h00
16h 16h00
17h 17h00
18h 18h00
19h 19h00
20h 20h00
21h 21h00
22h 22h00
23h 23h00rw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.11.4.7.2.4 |
dayLightSavingEndTime OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.4.11.4.7.3 |
dayLightSavingEndMonthrw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.11.4.7.3.1 |
dayLightSavingEndWeekrw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.11.4.7.3.2 |
dayLightSavingEndWdayrw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.11.4.7.3.3 |
dayLightSavingEndHour1h 01h00,
2h 02h00
3h 03h00
4h 04h00
5h 05h00
6h 06h00
7h 07h00
8h 08h00
9h 09h00
10h 10h00
11h 11h00
12h 12h00
13h 13h00
14h 14h00
15h 15h00
16h 16h00
17h 17h00
18h 18h00
19h 19h00
20h 20h00
21h 21h00
22h 22h00
23h 23h00rw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.11.4.7.3.4 |
accessCtrl OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.4.11.5 |
securedClientTableA table that contains information about secured clients. SEQUENCE OF SecuredClientEntry .1.3.6.1.4.1.6321.1.2.3.4.11.5.2 |
securedClientEntryA list of secured client entry. SecuredClientEntry .1.3.6.1.4.1.6321.1.2.3.4.11.5.2.1 |
securedClientIndexThe index of the entry.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.11.5.2.1.1 |
securedClientStartIpThe starting IP address of the secured client set.rw IpAddress .1.3.6.1.4.1.6321.1.2.3.4.11.5.2.1.2 |
securedClientEndIpThe ending IP address of the secured client set.rw IpAddress .1.3.6.1.4.1.6321.1.2.3.4.11.5.2.1.3 |
securedClientServiceEach bit corresponds to a service. The bit is set to 1 if the
service is enabled, and set to 0 if the service is disabled.
The various bit positions areh
BIT 1h telnet
BIT 2h ftp
BIT 3h web
BIT 4h icmp
BIT 5h not support
BIT 6h snmp.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.11.5.2.1.4 |
securedClientEnableEnable/disable the entry.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.11.5.2.1.5 |
extAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.4.11.8 |
extAlarmTableA table that contains external alarm information. SEQUENCE OF ExtAlarmEntry .1.3.6.1.4.1.6321.1.2.3.4.11.8.1 |
extAlarmEntryThe entry of external alarm table. ExtAlarmEntry .1.3.6.1.4.1.6321.1.2.3.4.11.8.1.1 |
extAlarmIndexThe index of the entry.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.11.8.1.1.1 |
extAlarmNameThe external alarm name.rw DisplayString .1.3.6.1.4.1.6321.1.2.3.4.11.8.1.1.2 |
extAlarmStatusDispaly 'Normal' or 'Alarm' stringro DisplayString .1.3.6.1.4.1.6321.1.2.3.4.11.8.1.1.3 |
extAlarmTriggeredModeThe external alarm triggered mode.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.11.8.1.1.4 |
user OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.4.11.9 |
userAuthModeUser authentication procsssing mode.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.11.9.1 |
userAuthServerIpThe IP address of the authentication server.rw IpAddress .1.3.6.1.4.1.6321.1.2.3.4.11.9.2 |
userAuthServerPortThe port of the authentication server.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.11.9.3 |
userAuthServerSecretThe secret between the authentication server and the NE for authentication process.rw OCTET STRING .1.3.6.1.4.1.6321.1.2.3.4.11.9.4 |
userTableA table that contains user information. SEQUENCE OF UserEntry .1.3.6.1.4.1.6321.1.2.3.4.11.9.5 |
userEntryAn entry of userTable. UserEntry .1.3.6.1.4.1.6321.1.2.3.4.11.9.5.1 |
userNameThe user name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.4.11.9.5.1.1 |
userPasswordThe user password.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.4.11.9.5.1.2 |
userPriviledgeThe user priviledge to decide what operation the user can and cannot do.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.11.9.5.1.3 |
userRowStatusThe row status used to create or delete a user.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.4.11.9.5.1.4 |
userAuthDefaultPriviledgeThe user default priviledge to be assigned when radius authentication succeeds
but no user priviledge information(radius service-type) is provided.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.11.9.6 |
usbCastCtrl OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.4.11.10 |
usBcastCtrlEnableEnable/disable upstream broadcast control.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.11.10.1 |
usBcastCtrlRaterw INTEGER --UNITS Kbps .1.3.6.1.4.1.6321.1.2.3.4.11.10.2 |
dsQos OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.4.11.11 |
dsQosEnableModeEnable internal overriding mode to VLAN, DSCP or IP Precedence, or disable the overriding mode.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.11.11.1 |
dsQosDefaultPriSet the internal default p.bit after overiding. All values not configured in the
overriding table are assigned to the default p.bitrw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.11.11.2 |
dsQoSOverridingTableThis table includes downstream QoS overriding information. SEQUENCE OF DsQoSOverridingEntry .1.3.6.1.4.1.6321.1.2.3.4.11.11.3 |
dsQoSOverridingEntryAn entry in dsQoSOverridingTable. DsQoSOverridingEntry .1.3.6.1.4.1.6321.1.2.3.4.11.11.3.1 |
dsQosPriorityInternal P.bit after overriding.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.11.11.3.1.1 |
dsQosValueListVLAN ID, DSCP, or IP Precedence based on the internal overriding mode configured.
VLAN ID 1 ~ 4094, DSCP 0 ~ 63, IP Precedence 0 ~ 7. value_list exampleh <1>, <1,3>, <1,5,6~10>.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.4.11.11.3.1.2 |
stdioTimeoutSet the CLI/TELNET/WEB Session timeout, 0, or 1~300 minutes, 0 => disable.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.11.12 |
isConfigChangedIf system configuration has been changed.ro Enumeration .1.3.6.1.4.1.6321.1.2.3.4.11.13 |
fwUpgrade OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.4.11.14 |
fwUpgradeVersionConfigure the target firmware version that will be upgraded.rw OCTET STRING .1.3.6.1.4.1.6321.1.2.3.4.11.14.1 |
fwUpgradeCheckEnable/disable firmware upgrade version checking feature.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.11.14.2 |
fwUpgradeStatusDisplay current firmware upgrade status.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.4.11.14.3 |
delayedReboot OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.4.11.15 |
delayedRebootTimer5~1800 secs, 0h reboot immediately.rw INTEGER --UNITS sec .1.3.6.1.4.1.6321.1.2.3.4.11.15.1 |
delayedRebootRemainingTimeDisplay the remaining time of scheduled reboot.ro INTEGER --UNITS sec .1.3.6.1.4.1.6321.1.2.3.4.11.15.2 |
delayedRebootCancelcancel the scheduled reboot.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.11.15.3 |
trap OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.4.12 |
statistics OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.4.13 |
igmpQueryCntTotalThe total number of IGMP query messages received.ro Counter32 .1.3.6.1.4.1.6321.1.2.3.4.13.1 |
igmpReportCntTotalThe total number of IGMP report messages received.ro Counter32 .1.3.6.1.4.1.6321.1.2.3.4.13.2 |
igmpLeaveCntTotalThe total number of IGMP leave messages received.ro Counter32 .1.3.6.1.4.1.6321.1.2.3.4.13.3 |
igmpNumOfActiveGroupsThe total number of IGMP learned groups.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.13.4 |
igmpGroupTableThis table includes igmp group information. SEQUENCE OF IgmpGroupEntry .1.3.6.1.4.1.6321.1.2.3.4.13.5 |
igmpGroupEntryAn entry in igmpGroupTable. IgmpGroupEntry .1.3.6.1.4.1.6321.1.2.3.4.13.5.1 |
igmpGroupIpigmp group IPro IpAddress .1.3.6.1.4.1.6321.1.2.3.4.13.5.1.1 |
igmpGroupvidvlan idro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.13.5.1.2 |
igmpGroupnumberOfMembersnumber Of Membersro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.13.5.1.3 |
igmpGroupMemberPortsGroup Member Portsro PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.6321.1.2.3.4.13.5.1.4 |
igmpGroupPortTableThis table includes igmp Group port information. SEQUENCE OF IgmpGroupPortEntry .1.3.6.1.4.1.6321.1.2.3.4.13.6 |
igmpGroupPortEntryAn entry in igmpGroupPortTable. IgmpGroupPortEntry .1.3.6.1.4.1.6321.1.2.3.4.13.6.1 |
igmpGroupPortIpIgmp Group IPro IpAddress .1.3.6.1.4.1.6321.1.2.3.4.13.6.1.1 |
igmpGroupPortvidIgmp Group vidro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.13.6.1.2 |
igmpGroupV2TableA table that displays IGMP learned group member information. SEQUENCE OF IgmpGroupV2Entry .1.3.6.1.4.1.6321.1.2.3.4.13.7 |
igmpGroupV2EntryAn entry of igmpGroupV2Table. IgmpGroupV2Entry .1.3.6.1.4.1.6321.1.2.3.4.13.7.1 |
igmpGroupV2VidThe IGMP group VLAN ID.ro VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.6321.1.2.3.4.13.7.1.1 |
igmpGroupV2IpThe multicast IP address.ro IpAddress .1.3.6.1.4.1.6321.1.2.3.4.13.7.1.2 |
igmpGroupV2NumOfMembersThe number of member ports in the group.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.13.7.1.3 |
igmpGroupV2MemberPortsThe member port list of the group.ro PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.6321.1.2.3.4.13.7.1.4 |
igmpGroupPortV2TableA table that displays IGMP joined groups in this port. SEQUENCE OF IgmpGroupPortV2Entry .1.3.6.1.4.1.6321.1.2.3.4.13.8 |
igmpGroupPortV2EntryAn entry of igmpGroupPortV2Table. IgmpGroupPortV2Entry .1.3.6.1.4.1.6321.1.2.3.4.13.8.1 |
igmpGroupPortV2VidThe IGMP group VLAN ID.ro VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.6321.1.2.3.4.13.8.1.1 |
igmpGroupPortV2IpThe multicast IP address.ro IpAddress .1.3.6.1.4.1.6321.1.2.3.4.13.8.1.2 |
igmpGroupPortV2SourceIpThe source IP address that joins the IGMP group.ro IpAddress .1.3.6.1.4.1.6321.1.2.3.4.13.8.1.3 |
igmpPortCtrlPduTableA table that displays IGMP related counter values in this port. SEQUENCE OF IgmpPortCtrlPduEntry .1.3.6.1.4.1.6321.1.2.3.4.13.9 |
igmpPortCtrlPduEntryAn entry of igmpPortCtrlPduTable. IgmpPortCtrlPduEntry .1.3.6.1.4.1.6321.1.2.3.4.13.9.1 |
igmpPortCtrlPduQueryCntThe total number of IGMP query messages received in this port.ro Counter32 .1.3.6.1.4.1.6321.1.2.3.4.13.9.1.1 |
igmpPortCtrlPduReportCntThe total number of IGMP report messages received in this port.ro Counter32 .1.3.6.1.4.1.6321.1.2.3.4.13.9.1.2 |
igmpPortCtrlPduLeaveCntThe total number of IGMP leave messages received in this port.ro Counter32 .1.3.6.1.4.1.6321.1.2.3.4.13.9.1.3 |
igmpPortNumOfActiveGroupsThe total number of active IGMP groups in this port.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.13.9.1.4 |
igmpPortCtrlAuditLeaveCntThe total number of groups left by audit query.ro Counter32 .1.3.6.1.4.1.6321.1.2.3.4.13.9.1.5 |
dhcpStats OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.4.13.11 |
dhcpSnoopIpTableThis table shows the IP addresses and netmasks offered by the DHCP server. SEQUENCE OF DhcpSnoopIpEntry .1.3.6.1.4.1.6321.1.2.3.4.13.11.1 |
dhcpSnoopIpEntryAn entry of dhcpSnoopIpTable. DhcpSnoopIpEntry .1.3.6.1.4.1.6321.1.2.3.4.13.11.1.1 |
dhcpSnoopIpThe snooped IP address.ro IpAddress .1.3.6.1.4.1.6321.1.2.3.4.13.11.1.1.1 |
dhcpSnoopMacThe snooped MAC address.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.4.13.11.1.1.2 |
dhcpSnoopVidThe snooped VLAN ID.ro VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.6321.1.2.3.4.13.11.1.1.3 |
dhcpSnoopMaskThe snooped IP maskro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.13.11.1.1.4 |
dhcpSnoopGatewayThe snooped Gateway.ro IpAddress .1.3.6.1.4.1.6321.1.2.3.4.13.11.1.1.5 |
dhcpSnoopRouteMapThe refrence bit map of the dhcp routero OCTET STRING .1.3.6.1.4.1.6321.1.2.3.4.13.11.1.1.6 |
dhcpSnoopCounterTableThis table shows the DHCP statistics. SEQUENCE OF DhcpSnoopCounterEntry .1.3.6.1.4.1.6321.1.2.3.4.13.11.2 |
dhcpSnoopCounterEntryAn entry of dhcpSnoopCounterTable. DhcpSnoopCounterEntry .1.3.6.1.4.1.6321.1.2.3.4.13.11.2.1 |
dhcpDiscoveryThe total number of received DHCP server discovery packets.ro Counter64 .1.3.6.1.4.1.6321.1.2.3.4.13.11.2.1.1 |
dhcpOfferThe total number of received DHCP server offer packets.ro Counter64 .1.3.6.1.4.1.6321.1.2.3.4.13.11.2.1.2 |
dhcpRequestThe total number of received DHCP IP request packets.ro Counter64 .1.3.6.1.4.1.6321.1.2.3.4.13.11.2.1.3 |
dhcpAckThe total number of received DHCP IP acknowledge packets.ro Counter64 .1.3.6.1.4.1.6321.1.2.3.4.13.11.2.1.4 |
dhcpAckBySnoopFullThe total number of received DHCP IP acknowledge packets that replace the oldest snooping
entry in snooping table due to table full.ro Counter64 .1.3.6.1.4.1.6321.1.2.3.4.13.11.2.1.5 |
dhcpRouteTableA table that contains dhcp route information. SEQUENCE OF DhcpRouteEntry .1.3.6.1.4.1.6321.1.2.3.4.13.11.3 |
dhcpRouteEntryAn entry of dhcpRouteTable. DhcpRouteEntry .1.3.6.1.4.1.6321.1.2.3.4.13.11.3.1 |
dhcpRouteIndexro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.13.11.3.1.1 |
dhcpRouteVidThe VLAN-ID refering to this dhcp route.ro VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.6321.1.2.3.4.13.11.3.1.2 |
dhcpRouteIPIP of this dhcp routero IpAddress .1.3.6.1.4.1.6321.1.2.3.4.13.11.3.1.3 |
dhcpRouteMaskThe subnet mask of source IP mask.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.13.11.3.1.4 |
dhcpRouteGwIPThe gateway IP address.ro IpAddress .1.3.6.1.4.1.6321.1.2.3.4.13.11.3.1.5 |
paepvcStats OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.4.13.12 |
paepvcSessionTableThis table shows the paepvc session statistics. SEQUENCE OF PaepvcSessionEntry .1.3.6.1.4.1.6321.1.2.3.4.13.12.1 |
paepvcSessionEntryAn entry of paepvcSessionTable. PaepvcSessionEntry .1.3.6.1.4.1.6321.1.2.3.4.13.12.1.1 |
paepvcSessionVpiThe PAEPVC VPI.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.13.12.1.1.1 |
paepvcSessionVciThe PAEPVC VCI.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.13.12.1.1.2 |
paepvcSessionStateThe PAEPVC status.ro Enumeration .1.3.6.1.4.1.6321.1.2.3.4.13.12.1.1.3 |
paepvcSessionIdThe PAEPVC session ID.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.13.12.1.1.4 |
paepvcSessionUptimeThe PAEPVC session uptime.ro Unsigned32 --UNITS second .1.3.6.1.4.1.6321.1.2.3.4.13.12.1.1.5 |
paepvcSessionacnameAccess concentrator name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.4.13.12.1.1.6 |
paepvcSessionsrvcnameService name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.4.13.12.1.1.7 |
paepvcCountTableThis table shows the paepvc counters. SEQUENCE OF PaepvcCountEntry .1.3.6.1.4.1.6321.1.2.3.4.13.12.2 |
paepvcCountEntryAn entry of paepvcCountTable. PaepvcCountEntry .1.3.6.1.4.1.6321.1.2.3.4.13.12.2.1 |
paepvcCountVpiThe PAEPVC VPI.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.13.12.2.1.1 |
paepvcCountVciThe PAEPVC VCI.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.13.12.2.1.2 |
paepvcCountPppLcpCfgReqRxThe number of ppp lcp config-request received.ro Unsigned32 .1.3.6.1.4.1.6321.1.2.3.4.13.12.2.1.3 |
paepvcCountPppLcpEchoReqRxThe number of ppp lcp echo-request received.ro Unsigned32 .1.3.6.1.4.1.6321.1.2.3.4.13.12.2.1.4 |
paepvcCountPppLcpEchoReplyRxThe number of ppp lcp echo-reply received.ro Unsigned32 .1.3.6.1.4.1.6321.1.2.3.4.13.12.2.1.5 |
paepvcCountPadiTxThe number of pppoe padi transferedro Unsigned32 .1.3.6.1.4.1.6321.1.2.3.4.13.12.2.1.6 |
paepvcCountPadoRxThe number of pppoe pado receivedro Unsigned32 .1.3.6.1.4.1.6321.1.2.3.4.13.12.2.1.7 |
paepvcCountPadrTxThe number of pppoe padr transferedro Unsigned32 .1.3.6.1.4.1.6321.1.2.3.4.13.12.2.1.8 |
paepvcCountPadsRxThe number of pppoe pads receivedro Unsigned32 .1.3.6.1.4.1.6321.1.2.3.4.13.12.2.1.9 |
paepvcCountPadtTxThe number of pppoe padt transferedro Unsigned32 .1.3.6.1.4.1.6321.1.2.3.4.13.12.2.1.10 |
paepvcCountPadtRxThe number of pppoe padt receivedro Unsigned32 .1.3.6.1.4.1.6321.1.2.3.4.13.12.2.1.11 |
paepvcCountSrvcnameErrRxThe number of pppoe service name error receivedro Unsigned32 .1.3.6.1.4.1.6321.1.2.3.4.13.12.2.1.12 |
paepvcCountAcSystemErrRxThe number of pppoe access concentrator name error receivedro Unsigned32 .1.3.6.1.4.1.6321.1.2.3.4.13.12.2.1.13 |
paepvcCountGenericErrTxThe number of pppoe generic error transferedro Unsigned32 .1.3.6.1.4.1.6321.1.2.3.4.13.12.2.1.14 |
paepvcCountGenericErrRxThe number of pppoe generic error receivedro Unsigned32 .1.3.6.1.4.1.6321.1.2.3.4.13.12.2.1.15 |
macStats OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.4.13.13 |
macDisplayTargetThis managed object is a filter used for identify the target from which
the MAC addresses are learned in macTable. The target could beh
99h all ports in the system
98h all subscriber ports
97h all Ethernet ports
IfIndex is used for identifying subscriber ports and Ethernet Ports(e.g. 1 ~ 50).rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.13.13.1 |
macTableA table that contains information about unicast
entries for which the bridge has forwarding and/or
filtering information. This information is used
by the transparent bridging function in
determining how to propagate a received frame. SEQUENCE OF MacEntry .1.3.6.1.4.1.6321.1.2.3.4.13.13.2 |
macEntryAn entry of macTable. MacEntry .1.3.6.1.4.1.6321.1.2.3.4.13.13.2.1 |
macAddressA unicast MAC address for which the bridge has
forwarding and/or filtering information.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.4.13.13.2.1.1 |
macPortThe port from which the mac address has been learned.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.13.13.2.1.2 |
macStatusThe status of this entry.ro Enumeration .1.3.6.1.4.1.6321.1.2.3.4.13.13.2.1.3 |
macVidThe vlan id of this entry.ro VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.6321.1.2.3.4.13.13.2.1.4 |
n1macStats OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.4.13.15 |
n1macTableA table that contains information about N to 1
MAC translation, including connection type,
session id/IP and MAC address. SEQUENCE OF N1macEntry .1.3.6.1.4.1.6321.1.2.3.4.13.15.1 |
n1macEntryAn entry of n1macTable. N1macEntry .1.3.6.1.4.1.6321.1.2.3.4.13.15.1.1 |
n1macProtoValThe protocol value of specified connection. If the connection
is pppoe/pppoaoe, the value stands for session id; if the
connection is ipoe/ipoaoe, the value means IP address.ro Unsigned32 .1.3.6.1.4.1.6321.1.2.3.4.13.15.1.1.1 |
n1macProtoTypeProtocol type of the connection which the MAC is translated.ro Enumeration .1.3.6.1.4.1.6321.1.2.3.4.13.15.1.1.2 |
n1macMacAddrThe translated MAC address.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.4.13.15.1.1.3 |
enetStats OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.4.13.16 |
enetPrimaryPortIfIndex is used for identifying the Primary Ethernet Port when dot3ad is disabled.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.13.16.1 |
enetSfpInfoTableThis table includes sfp info of enet port. SEQUENCE OF EnetSfpInfoEntry .1.3.6.1.4.1.6321.1.2.3.4.13.16.2 |
enetSfpInfoEntryAn entry in enetSfpInfoTable. EnetSfpInfoEntry .1.3.6.1.4.1.6321.1.2.3.4.13.16.2.1 |
enetSfpInfoTxpowerMeasured Tx Output Power.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.13.16.2.1.1 |
enetSfpInfoRxpowerMeasured Rx Output Power.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.13.16.2.1.2 |
enetSfpInfoTemperatureMeasured temperature.ro INTEGER (-1280000..1280000) --UNITS 10^-4 C .1.3.6.1.4.1.6321.1.2.3.4.13.16.2.1.3 |
enetSfpInfoTxBiasMeasured tx bias.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.13.16.2.1.4 |
enetSfpInfoVoltageMeasured voltage.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.13.16.2.1.5 |
vdslStats OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.4.13.17 |
vdslLineStatsTableThe table displays VDSL line statistics. SEQUENCE OF VdslLineStatsEntry .1.3.6.1.4.1.6321.1.2.3.4.13.17.2 |
vdslLineStatsEntryAn entry of vdslLineStatsTable. VdslLineStatsEntry .1.3.6.1.4.1.6321.1.2.3.4.13.17.2.1 |
vdslLineStatsVtucBits1The object provides Bits for the VTU-C 1024 subcarriers.
Each subcarrier takes two octets to store the value.
The value is in the range 0 to 15.ro OCTET STRING .1.3.6.1.4.1.6321.1.2.3.4.13.17.2.1.1 |
vdslLineStatsVtucBits2The object provides Bits for the VTU-C 1024 subcarriers.
Each subcarrier takes two octets to store the value.
The value is in the range 0 to 15.ro OCTET STRING .1.3.6.1.4.1.6321.1.2.3.4.13.17.2.1.2 |
vdslLineStatsVtucBits3The object provides Bits for the VTU-C 1024 subcarriers.
Each subcarrier takes two octets to store the value.
The value is in the range 0 to 15.ro OCTET STRING .1.3.6.1.4.1.6321.1.2.3.4.13.17.2.1.3 |
vdslLineStatsVtucBits4The object provides Bits for the VTU-C 1024 subcarriers.
Each subcarrier takes two octets to store the value.
The value is in the range 0 to 15.ro OCTET STRING .1.3.6.1.4.1.6321.1.2.3.4.13.17.2.1.4 |
vdslLineStatsVturBits1The object provides Bits for the VTU-R 1024 subcarriers.
Each subcarrier takes two octets to store the value.
The value is in the range 0 to 15.ro OCTET STRING .1.3.6.1.4.1.6321.1.2.3.4.13.17.2.1.5 |
vdslLineStatsVturBits2The object provides Bits for the VTU-R 1024 subcarriers.
Each subcarrier takes two octets to store the value.
The value is in the range 0 to 15.ro OCTET STRING .1.3.6.1.4.1.6321.1.2.3.4.13.17.2.1.6 |
vdslLineStatsVturBits3The object provides Bits for the VTU-R 1024 subcarriers.
Each subcarrier takes two octets to store the value.
The value is in the range 0 to 15.ro OCTET STRING .1.3.6.1.4.1.6321.1.2.3.4.13.17.2.1.7 |
vdslLineStatsVturBits4The object provides Bits for the VTU-R 1024 subcarriers.
Each subcarrier takes two octets to store the value.
The value is in the range 0 to 15.ro OCTET STRING .1.3.6.1.4.1.6321.1.2.3.4.13.17.2.1.8 |
vdslLineStatsVtucGain1The object provides Gain for the VTU-C 512 subcarriers.
Each subcarrier takes two octets to store the value.
The value is in the range 0 to 4093. Each value in this array is 16 bits wide.
The gain value is represented as a multiple of 1/512 on linear scale.ro OCTET STRING .1.3.6.1.4.1.6321.1.2.3.4.13.17.2.1.9 |
vdslLineStatsVtucGain2The object provides Gain for the VTU-C 512 subcarriers.
Each subcarrier takes two octets to store the value.
The value is in the range 0 to 4093. Each value in this array is 16 bits wide.
The gain value is represented as a multiple of 1/512 on linear scale.ro OCTET STRING .1.3.6.1.4.1.6321.1.2.3.4.13.17.2.1.10 |
vdslLineStatsVtucGain3The object provides Gain for the VTU-C 512 subcarriers.
Each subcarrier takes two octets to store the value.
The value is in the range 0 to 4093. Each value in this array is 16 bits wide.
The gain value is represented as a multiple of 1/512 on linear scale.ro OCTET STRING .1.3.6.1.4.1.6321.1.2.3.4.13.17.2.1.11 |
vdslLineStatsVtucGain4The object provides Gain for the VTU-C 512 subcarriers.
Each subcarrier takes two octets to store the value.
The value is in the range 0 to 4093. Each value in this array is 16 bits wide.
The gain value is represented as a multiple of 1/512 on linear scale.ro OCTET STRING .1.3.6.1.4.1.6321.1.2.3.4.13.17.2.1.12 |
vdslLineStatsVtucGain5The object provides Gain for the VTU-C 512 subcarriers.
Each subcarrier takes two octets to store the value.
The value is in the range 0 to 4093. Each value in this array is 16 bits wide.
The gain value is represented as a multiple of 1/512 on linear scale.ro OCTET STRING .1.3.6.1.4.1.6321.1.2.3.4.13.17.2.1.13 |
vdslLineStatsVtucGain6The object provides Gain for the VTU-C 512 subcarriers.
Each subcarrier takes two octets to store the value.
The value is in the range 0 to 4093. Each value in this array is 16 bits wide.
The gain value is represented as a multiple of 1/512 on linear scale.ro OCTET STRING .1.3.6.1.4.1.6321.1.2.3.4.13.17.2.1.14 |
vdslLineStatsVtucGain7The object provides Gain for the VTU-C 512 subcarriers.
Each subcarrier takes two octets to store the value.
The value is in the range 0 to 4093. Each value in this array is 16 bits wide.
The gain value is represented as a multiple of 1/512 on linear scale.ro OCTET STRING .1.3.6.1.4.1.6321.1.2.3.4.13.17.2.1.15 |
vdslLineStatsVtucGain8The object provides Gain for the VTU-C 512 subcarriers.
Each subcarrier takes two octets to store the value.
The value is in the range 0 to 4093. Each value in this array is 16 bits wide.
The gain value is represented as a multiple of 1/512 on linear scale.ro OCTET STRING .1.3.6.1.4.1.6321.1.2.3.4.13.17.2.1.16 |
vdslLineStatsVturGain1The object provides Gain for the VTU-R 512 subcarriers.
Each subcarrier takes two octets to store the value.
The value is in the range 0 to 4093. Each value in this array is 16 bits wide.
The gain value is represented as a multiple of 1/512 on linear scale.ro OCTET STRING .1.3.6.1.4.1.6321.1.2.3.4.13.17.2.1.17 |
vdslLineStatsVturGain2The object provides Gain for the VTU-R 512 subcarriers.
Each subcarrier takes two octets to store the value.
The value is in the range 0 to 4093. Each value in this array is 16 bits wide.
The gain value is represented as a multiple of 1/512 on linear scale.ro OCTET STRING .1.3.6.1.4.1.6321.1.2.3.4.13.17.2.1.18 |
vdslLineStatsVturGain3The object provides Gain for the VTU-R 512 subcarriers.
Each subcarrier takes two octets to store the value.
The value is in the range 0 to 4093. Each value in this array is 16 bits wide.
The gain value is represented as a multiple of 1/512 on linear scale.ro OCTET STRING .1.3.6.1.4.1.6321.1.2.3.4.13.17.2.1.19 |
vdslLineStatsVturGain4The object provides Gain for the VTU-R 512 subcarriers.
Each subcarrier takes two octets to store the value.
The value is in the range 0 to 4093. Each value in this array is 16 bits wide.
The gain value is represented as a multiple of 1/512 on linear scale.ro OCTET STRING .1.3.6.1.4.1.6321.1.2.3.4.13.17.2.1.20 |
vdslLineStatsVturGain5The object provides Gain for the VTU-R 512 subcarriers.
Each subcarrier takes two octets to store the value.
The value is in the range 0 to 4093. Each value in this array is 16 bits wide.
The gain value is represented as a multiple of 1/512 on linear scale.ro OCTET STRING .1.3.6.1.4.1.6321.1.2.3.4.13.17.2.1.21 |
vdslLineStatsVturGain6The object provides Gain for the VTU-R 512 subcarriers.
Each subcarrier takes two octets to store the value.
The value is in the range 0 to 4093. Each value in this array is 16 bits wide.
The gain value is represented as a multiple of 1/512 on linear scale.ro OCTET STRING .1.3.6.1.4.1.6321.1.2.3.4.13.17.2.1.22 |
vdslLineStatsVturGain7The object provides Gain for the VTU-R 512 subcarriers.
Each subcarrier takes two octets to store the value.
The value is in the range 0 to 4093. Each value in this array is 16 bits wide.
The gain value is represented as a multiple of 1/512 on linear scale.ro OCTET STRING .1.3.6.1.4.1.6321.1.2.3.4.13.17.2.1.23 |
vdslLineStatsVturGain8The object provides Gain for the VTU-R 512 subcarriers.
Each subcarrier takes two octets to store the value.
The value is in the range 0 to 4093. Each value in this array is 16 bits wide.
The gain value is represented as a multiple of 1/512 on linear scale.ro OCTET STRING .1.3.6.1.4.1.6321.1.2.3.4.13.17.2.1.24 |
vdslLineStatsVtucHlogThe object provides Hlog for the VTU-C 512 subcarriers.
Each subcarrier takes two octets to store the value.
The real Hlog(f) value is represented as (6-m(i)/10), with m(i) in the range 0 to 1022.
A special value m=1023 indicates that no measurement could be done for the
sub-carrier group becauseit is out of the passband or that the attenuation
is out of range to be represented. Each value in this array is 16 bits wide.ro OCTET STRING .1.3.6.1.4.1.6321.1.2.3.4.13.17.2.1.25 |
vdslLineStatsVturHlogThe object provides Hlog for the VTU-R 512 subcarriers.
Each subcarrier takes two octets to store the value.
The real Hlog(f) value is represented as (6-m(i)/10), with m(i) in the range 0 to 1022.
A special value m=1023 indicates that no measurement could be done for the
sub-carrier group because it is out of the passband or that the attenuation
is out ofrange to be represented. Each value in this array is 16 bits wide.ro OCTET STRING .1.3.6.1.4.1.6321.1.2.3.4.13.17.2.1.26 |
vdslLineStatsVtucQlnThe object provides Qln for the VTU-C 512 subcarriers.
Each subcarrier takes two octets to store the value.
The QLN(f) is represented as ( -23-n(i)/2), with n(i) in the range 0 to 254.
A special value n(i)=255 indicates that no measurement could be done for the
sub-carrier group. Each value in this array is 8 bits wide.ro OCTET STRING .1.3.6.1.4.1.6321.1.2.3.4.13.17.2.1.27 |
vdslLineStatsVturQlnThe object provides Qln for the VTU-R 512 subcarriers.
Each subcarrier takes two octets to store the value.
The QLN(f) is represented as ( -23-n(i)/2), with n(i) in the range 0 to 254.
A special value n(i)=255 indicates that no measurement could be done for the
sub-carrier group. Each value in this array is 8 bits wide.ro OCTET STRING .1.3.6.1.4.1.6321.1.2.3.4.13.17.2.1.28 |
vdslLineStatsVtucSnrThe object provides Snr for the VTU-C 512 subcarriers.
Each subcarrier takes two octets to store the value.
Octet i is set to a value in the range 0 to 254 (-32 + vdslLineStatsVtucSnr (i)/2) in dB
(i.e., -32 to 95dB). Each value in this array is 8 bits wide.ro OCTET STRING .1.3.6.1.4.1.6321.1.2.3.4.13.17.2.1.29 |
vdslLineStatsVturSnrThe object provides Snr for the VTU-R 512 subcarriers.
Each subcarrier takes two octets to store the value.
Octet i is set to a value in the range 0 to 254 (-32 + vdslLineStatsVturSnr (i)/2) in dB
(i.e., -32 to 95dB). Each value in this array is 8 bits wide.ro OCTET STRING .1.3.6.1.4.1.6321.1.2.3.4.13.17.2.1.30 |
vdslLineStatsVtucTssiThe object provides Tssi for the VTU-C 512 subcarriers.
Each subcarrier takes two octets to store the value.
Each value in this array is 16 bits wide.
The tssi value is represented as a multiple of 1/32768 on linear scale.ro OCTET STRING .1.3.6.1.4.1.6321.1.2.3.4.13.17.2.1.31 |
vdslLineStatsVturTssiThe object provides Tssi for the VTU-R 512 subcarriers.
Each subcarrier takes two octets to store the value.
Each value in this array is 16 bits wide.
The tssi value is represented as a multiple of 1/32768 on linear scale.ro OCTET STRING .1.3.6.1.4.1.6321.1.2.3.4.13.17.2.1.32 |
vdslLineStatsProtocolThe actual line protocol.ro Enumeration .1.3.6.1.4.1.6321.1.2.3.4.13.17.2.1.33 |
voipStats OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.4.13.18 |
voipLineStatusTableThe table displays VoIP line status. SEQUENCE OF VoipLineStatusEntry .1.3.6.1.4.1.6321.1.2.3.4.13.18.1 |
voipLineStatusEntryAn entry of voipLineStatusTable. VoipLineStatusEntry .1.3.6.1.4.1.6321.1.2.3.4.13.18.1.1 |
voipLineStatusPhoneStatusPhone status of the line.ro Enumeration .1.3.6.1.4.1.6321.1.2.3.4.13.18.1.1.1 |
voipLineStatusServiceStatusService status of the line.ro Enumeration .1.3.6.1.4.1.6321.1.2.3.4.13.18.1.1.2 |
voipLineInfoTableThe table displays VoIP line information. SEQUENCE OF VoipLineInfoEntry .1.3.6.1.4.1.6321.1.2.3.4.13.18.2 |
voipLineInfoEntryAn entry of voipLineInfoTable. VoipLineInfoEntry .1.3.6.1.4.1.6321.1.2.3.4.13.18.2.1 |
voipLineInfoSipLocalUriro OCTET STRING .1.3.6.1.4.1.6321.1.2.3.4.13.18.2.1.1 |
voipLineInfoSipRemoteUriro OCTET STRING .1.3.6.1.4.1.6321.1.2.3.4.13.18.2.1.2 |
voipLineInfoRtpTxCodecTypero OCTET STRING .1.3.6.1.4.1.6321.1.2.3.4.13.18.2.1.3 |
voipLineInfoRtpRxCodecTypero OCTET STRING .1.3.6.1.4.1.6321.1.2.3.4.13.18.2.1.4 |
voipLineInfoRtpTxPtro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.13.18.2.1.5 |
voipLineInfoRtpRxPtro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.13.18.2.1.6 |
voipLineInfoRtpLocalIpro IpAddress .1.3.6.1.4.1.6321.1.2.3.4.13.18.2.1.7 |
voipLineInfoRtpRemoteIpro IpAddress .1.3.6.1.4.1.6321.1.2.3.4.13.18.2.1.8 |
voipLineInfoRtpLocalPortro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.13.18.2.1.9 |
voipLineInfoRtpRemotePortro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.13.18.2.1.10 |
voipLineInfoSipLocalUri2ro OCTET STRING .1.3.6.1.4.1.6321.1.2.3.4.13.18.2.1.11 |
voipLineInfoSipRemoteUri2ro OCTET STRING .1.3.6.1.4.1.6321.1.2.3.4.13.18.2.1.12 |
voipLineInfoRtpTxCodecType2ro OCTET STRING .1.3.6.1.4.1.6321.1.2.3.4.13.18.2.1.13 |
voipLineInfoRtpRxCodecType2ro OCTET STRING .1.3.6.1.4.1.6321.1.2.3.4.13.18.2.1.14 |
voipLineInfoRtpTxPt2ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.13.18.2.1.15 |
voipLineInfoRtpRxPt2ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.13.18.2.1.16 |
voipLineInfoRtpLocalIp2ro IpAddress .1.3.6.1.4.1.6321.1.2.3.4.13.18.2.1.17 |
voipLineInfoRtpRemoteIp2ro IpAddress .1.3.6.1.4.1.6321.1.2.3.4.13.18.2.1.18 |
voipLineInfoRtpLocalPort2ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.13.18.2.1.19 |
voipLineInfoRtpRemotePort2ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.13.18.2.1.20 |
voipH248Status OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.4.13.18.3 |
voipH248StatusMgNameMG name.ro OCTET STRING .1.3.6.1.4.1.6321.1.2.3.4.13.18.3.1 |
voipH248StatusMgStatusMg connection status.ro Enumeration .1.3.6.1.4.1.6321.1.2.3.4.13.18.3.2 |
voipActiveCallStat OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.4.13.18.4 |
voipActiveCallStatCurrentActiveCallsNumber of current active calls.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.13.18.4.1 |
voipActiveCallStatFailAttemptsFailed attempts to setup active call.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.13.18.4.2 |
voipActiveCallStatClearThe manager sets the corresponding bit value to 1 to start the operation
and the agent clears the object to zero when the operation is successfully completed.
The various bit positions ish
BIT 1h Clear failed attempts to setup active call.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.13.18.4.3 |
macffStats OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.4.13.19 |
macFfStatsTableA table that contains MAC Force Forwarding static configuration and dynamic information. SEQUENCE OF MacFfStatsEntry .1.3.6.1.4.1.6321.1.2.3.4.13.19.1 |
macFfStatsEntryAn entry of macFfStatsTable. MacFfStatsEntry .1.3.6.1.4.1.6321.1.2.3.4.13.19.1.1 |
macFfStatsIndexIndex of the MACFF.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.13.19.1.1.1 |
macFfStatsVidThe VLAN-ID refering to this AR/AS.ro VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.6321.1.2.3.4.13.19.1.1.2 |
macFfStatsArIPIP of this AR/ASro IpAddress .1.3.6.1.4.1.6321.1.2.3.4.13.19.1.1.3 |
macFfStatsSrcIPThe source IP address of the MACFF.ro IpAddress .1.3.6.1.4.1.6321.1.2.3.4.13.19.1.1.4 |
macFfStatsSrcMaskThe subnet mask of source IP mask.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.13.19.1.1.5 |
macFfArpTableA table that contains MAC Force Forwarding ARP information. SEQUENCE OF MacFfArpEntry .1.3.6.1.4.1.6321.1.2.3.4.13.19.2 |
macFfArpEntryAn entry of macFfArpTable. MacFfArpEntry .1.3.6.1.4.1.6321.1.2.3.4.13.19.2.1 |
macFfArpVidThe VLAN-ID refering to this AR/AS.ro VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.6321.1.2.3.4.13.19.2.1.1 |
macFfArpIPIP of this AR/AS.ro IpAddress .1.3.6.1.4.1.6321.1.2.3.4.13.19.2.1.2 |
macFfArpPortPort of this AR/AS.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.13.19.2.1.3 |
macFfArpMacMAC address of the AR or AS.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.4.13.19.2.1.4 |
macFfArpCounterTableA table that contains MAC Force Forwarding ARP counter information. SEQUENCE OF MacFfArpCounterEntry .1.3.6.1.4.1.6321.1.2.3.4.13.19.3 |
macFfArpCounterEntryAn entry of macFfArpCounterTable. MacFfArpCounterEntry .1.3.6.1.4.1.6321.1.2.3.4.13.19.3.1 |
macFfArpCounterRequestTXARP Request TX counter.ro Counter32 .1.3.6.1.4.1.6321.1.2.3.4.13.19.3.1.1 |
macFfArpCounterRequestRXARP Request RX counter.ro Counter32 .1.3.6.1.4.1.6321.1.2.3.4.13.19.3.1.2 |
macFfArpCounterRequestRXDropARP Request RX drop counter.ro Counter32 .1.3.6.1.4.1.6321.1.2.3.4.13.19.3.1.3 |
macFfArpCounterReplyTXARP Reply TX counter.ro Counter32 .1.3.6.1.4.1.6321.1.2.3.4.13.19.3.1.4 |
macFfArpCounterReplyRXARP Reply RX counter.ro Counter32 .1.3.6.1.4.1.6321.1.2.3.4.13.19.3.1.5 |
macFfArpCounterReplyRXDropARP Reply RX drop counter.ro Counter32 .1.3.6.1.4.1.6321.1.2.3.4.13.19.3.1.6 |
adslStats OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.4.13.20 |
adslPortUtilTableThis table includes adsl port utilization. SEQUENCE OF AdslPortUtilEntry .1.3.6.1.4.1.6321.1.2.3.4.13.20.1 |
adslPortUtilEntryAn entry in adslPortUtilEntry. AdslPortUtilEntry .1.3.6.1.4.1.6321.1.2.3.4.13.20.1.1 |
adslPortUtilTxMeasure adsl port's tx utilization.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.13.20.1.1.1 |
adslPortUtilRxMeasure adsl port's rx utilization.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.13.20.1.1.2 |
adslStatsXturInpXTUR minimum INP value.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.4.13.20.1.1.3 |
adslStatsXtucInpXTUC minimum INP valu.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.4.13.20.1.1.4 |
clear OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.4.14 |
counterClearTargetThis managed object is used for identify the target on which
the counter would be cleared. The target is encoded ash
Byte 1h reserved
Byte 2~3h reserved
Byte 4h reserved
Byte 5~11heach octet specifies a set of eight ports, with the first
octet specifying ports 1 through 8, etc.rw OCTET STRING .1.3.6.1.4.1.6321.1.2.3.4.14.1 |
counterClearOpsThe corresponding bit is set to 1 to start the operation.
The various bit positions areh
BIT 1h clear interface counters
BIT 2h clear pvc packet counters
BIT 3h not support
BIT 4h not support
BIT 5h clear DHCP counters
BIT 6h clear IGMP counters
BIT 7h clear IGMP port counters
BIT 8h not support
BIT 9h clear current lineperf
BIT 10h clear current 15 minute lineperf
BIT 11h clear current 1 day lineperfrw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.14.2 |
counterClearVpiVPI of the pvc whose counters would be cleared.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.14.3 |
counterClearVciVCI of the pvc whose counters would be cleared.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.14.4 |
voip OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.4.16 |
voipArp OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.4.16.1 |
voipArpFlushOpsSet the object to 1 to start flushing.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.16.1.1 |
voipArpShowTableDisplay ARP entries learnt in specified slot. SEQUENCE OF VoipArpShowEntry .1.3.6.1.4.1.6321.1.2.3.4.16.1.2 |
voipArpShowEntryAn entry of voipArpShowTable. VoipArpShowEntry .1.3.6.1.4.1.6321.1.2.3.4.16.1.2.1 |
voipArpShowIpro IpAddress .1.3.6.1.4.1.6321.1.2.3.4.16.1.2.1.1 |
voipArpShowMacro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.4.16.1.2.1.2 |
voipSip OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.4.16.2 |
maxNumOfVoipNumberPlanThe maximum number of VoIP number plan supported by the system.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.16.2.1 |
voipNumberPlanTableConfigure numbering plan entry of specified index in specified payphone charging table. SEQUENCE OF VoipNumberPlanEntry .1.3.6.1.4.1.6321.1.2.3.4.16.2.2 |
voipNumberPlanEntryAn entry of voipNumberPlanTable. VoipNumberPlanEntry .1.3.6.1.4.1.6321.1.2.3.4.16.2.2.1 |
voipNumberPlanNameNumbering plan table name.ro DisplayString .1.3.6.1.4.1.6321.1.2.3.4.16.2.2.1.1 |
voipNumberPlanIndexro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.16.2.2.1.2 |
voipNumberPlanPatternAllowed characters are 0~9, *, T, S, P, x, ., |
and range format characters that include '~', ','
and parenthesis '(', ')', brackets '[', ']', braces '{', '}'
and at most one parenthesis pair are allowed,
Examplesh '002(*)', '0(*)', and '(*)'.
'*' represents one or more digit characters
'x' represents any digit character
'T' timeout send of dial string, can only appear at the end of pattern
'S' star phone key (*) match character in dial plan
'P' pound key (#) match character in dial plan
'.' represents zero or more repetitions of character or range
that precedes it, can't use the dot character '.' in brackets
'|' used to separate multiple number plan patterns
[n~m,k] match a range of digits n~m or a specified digit k,
'[' and ']' must pair and nest brackets is illegal
'~' and ',' are allowed showing in brackets only
'~' connected characters must be digit
{n} match n digitsrw OCTET STRING .1.3.6.1.4.1.6321.1.2.3.4.16.2.2.1.3 |
voipNumberPlanRuleAllowed characters are 0~9, and
'\c' stand for country code,
'\d' stand for national destination code,
'\1' stand for matched string enclosed by the parenthesis pair,
'\n' stand for no local disconnect
'\p' stand for partial pattern
'\t' stand for confirmation tone play
'\tr' stand for recall dial tone play
'deny' stand for the pattern specified is not allowed.
Examplesh '\1', '\c\1', and '\c\d\1'.rw OCTET STRING .1.3.6.1.4.1.6321.1.2.3.4.16.2.2.1.4 |
voipNumberPlanRowStatusThis object is used to create a new entry or delete an existing entry in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.4.16.2.2.1.5 |
voipNumberPlanDftTableConfigure the action rule after inter-digit timeout in specified entry of numbering plan table. SEQUENCE OF VoipNumberPlanDftEntry .1.3.6.1.4.1.6321.1.2.3.4.16.2.3 |
voipNumberPlanDftEntryAn entry of voipNumberDftPlanTable. VoipNumberPlanDftEntry .1.3.6.1.4.1.6321.1.2.3.4.16.2.3.1 |
voipNumberPlanDftRuleAllowed characters are 0~9, and
'\c' stand for country code,
'\d' stand for national destination code,
'\1' stand for matched string enclosed by the parenthesis pair,
'\n' stand for no local disconnect
'\p' stand for partial pattern
'\t' stand for confirmation tone play
'deny' stand for the pattern specified is not allowed.
Examplesh '\1', '\c\1', and '\c\d\1'.rw OCTET STRING .1.3.6.1.4.1.6321.1.2.3.4.16.2.3.1.1 |
digitSetup OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.4.16.2.4 |
timeoutSetup OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.4.16.2.4.1 |
initialTimeoutFirst digit must be dialed before this timeout, 1 ~ 20 seconds.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.16.2.4.1.1 |
interDigitTimeoutIf no pattern string is fully matched, the inter-digit timeout will
trigger device to send out current dialed digits, 1 ~ 20 seconds.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.16.2.4.1.2 |
digitPauseTimeoutIf a pattern string is end with the T pattern, the pattern string
will not be matched until the timeout happens, 1 ~ 20 seconds.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.16.2.4.1.3 |
matchingTimeoutIf a pattern string is fully matched, and there are other pattern
strings partially matched, the pattern string will be sent out if
the timeout happens, 1 ~ 20 seconds.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.16.2.4.1.4 |
voipIp OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.4.16.3 |
voipIpSetIpVoIP's IP address.rw IpAddress .1.3.6.1.4.1.6321.1.2.3.4.16.3.1 |
voipIpSetVidVoIP's VLAN ID.rw VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.6321.1.2.3.4.16.3.2 |
voipIpSetMaskVoIP's network mask.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.16.3.3 |
voipIpSetDhcpClientEnableEnable/disable VoIP's DHCP Client.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.16.3.4 |
voipIpGatewayIP of default VoIP gateway.rw IpAddress .1.3.6.1.4.1.6321.1.2.3.4.16.3.5 |
voipDns OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.4.16.4 |
voipDnsIpIP address.rw IpAddress .1.3.6.1.4.1.6321.1.2.3.4.16.4.1 |
maxNumOfVoipRouteThe maximum number of VoIP routing entries.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.16.7 |
voipRouteTable SEQUENCE OF VoipRouteEntry .1.3.6.1.4.1.6321.1.2.3.4.16.8 |
voipRouteEntryAn entry of voipRouteTable. VoipRouteEntry .1.3.6.1.4.1.6321.1.2.3.4.16.8.1 |
voipRouteIpIP address.ro IpAddress .1.3.6.1.4.1.6321.1.2.3.4.16.8.1.1 |
voipRouteGatewayGateway IP.ro IpAddress .1.3.6.1.4.1.6321.1.2.3.4.16.8.1.2 |
voipRouteMaskNetwork mask.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.16.8.1.3 |
voipRouteMetricMetric number of the route.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.16.8.1.4 |
voipRouteRowStatusThis object is used to create a new entry or delete an existing entry in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.4.16.8.1.5 |
voipCountryCodeConfigure country (information) for VoIP services.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.16.9 |
voipH248 OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.4.16.10 |
maxNumOfVoipH248MgConfThe maximum number of virtual media gateway supported by the system.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.16.10.1 |
voipH248MgConf OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.4.16.10.2 |
voipH248MgNameMG name.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.4.16.10.2.1 |
voipH248MgEnableEnable/disable MG.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.16.10.2.2 |
voipH248MgH248ProfileH248 profile name used by MG.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.4.16.10.2.3 |
voipH248MgPortPort number used by MG.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.16.10.2.4 |
voipRing OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.4.16.11 |
voipRingTable SEQUENCE OF VoipRingEntry .1.3.6.1.4.1.6321.1.2.3.4.16.11.1 |
voipRingEntryAn entry of voipRouteTable. VoipRingEntry .1.3.6.1.4.1.6321.1.2.3.4.16.11.1.1 |
voipRingIndexro INTEGER .1.3.6.1.4.1.6321.1.2.3.4.16.11.1.1.1 |
voipRingNameRing identifier used in SIP Alert-Info header fieldrw DisplayString .1.3.6.1.4.1.6321.1.2.3.4.16.11.1.1.2 |
voipRingOn1first on time in millisecondsrw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.16.11.1.1.3 |
voipRingOff1first off time in millisecondsrw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.16.11.1.1.4 |
voipRingOn2second on time in millisecondsrw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.16.11.1.1.5 |
voipRingOff2second off time in millisecondsrw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.16.11.1.1.6 |
voipRingOn3third on time in millisecondsrw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.16.11.1.1.7 |
voipRingOff3third off time in millisecondsrw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.16.11.1.1.8 |
voipRingSetDefaultSet the index to default value.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.16.11.2 |
voipBootRegDelayRegistration delay in seconds.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.16.12 |
voipActiveCall OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.4.16.13 |
voipActiveCallMaxActiveCallsConfigure maximum number of concurrent active calls, 0~96.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.16.13.1 |
voipActiveCallThresholdThe threshold to report or clear alarm, 50~100.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.4.16.13.2 |
voipModeConfigure the Mode for VoIP Service.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.4.16.100 |
aesSeriesCommon OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.4.97 |
iesSeriesCommon OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.4.98 |
accessSwitchCommonATM OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.4.99 |