E5-111-IESCOMMON-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
242
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
242 total| Object Name |
|---|
rebootSend a message to the manager that the system is going to reboot.
The variable is the reason why the system reboots. TRAP-TYPE .1.3.6.1.4.1.6321.1.2.3.2.0.1 |
systemShutdownSend a message to the manager that the system is going to shutdown.
The variable is the reason that causes the system to shutdown. TRAP-TYPE .1.3.6.1.4.1.6321.1.2.3.2.0.2 |
overheatSend a message to the manager that the system is overheated.
The variable in the binding list is the current temperature in Celsius
of the system. TRAP-TYPE .1.3.6.1.4.1.6321.1.2.3.2.0.3 |
overheatOverSend a message to the manager that the overheated condition is over.
The variable in the binding list is the current temperature in Celsius
of the system. TRAP-TYPE .1.3.6.1.4.1.6321.1.2.3.2.0.4 |
errLogSend a message to the manager that an error log is created in system.
The variable in the binding list is the content of the error log. TRAP-TYPE .1.3.6.1.4.1.6321.1.2.3.2.0.5 |
fanRpmLowSend a message to the manager that the rpm of the fan is too low.
The variable in the binding list is the current rpm of the fan. TRAP-TYPE .1.3.6.1.4.1.6321.1.2.3.2.0.6 |
fanRpmNormalSend a message to the manager that the low-rpm condition of the fan is over.
The variable in the binding list is the current rpm of the fan. TRAP-TYPE .1.3.6.1.4.1.6321.1.2.3.2.0.7 |
voltageOutOfRangeSend a message to the manager that the voltage of the system is out of range.
The variable in the binding list is the current voltage in volt
of the system. TRAP-TYPE .1.3.6.1.4.1.6321.1.2.3.2.0.8 |
voltageNormalSend a message to the manager that the low-voltage condition is over.
The variable in the binding list is the current voltage in volt
of the system. TRAP-TYPE .1.3.6.1.4.1.6321.1.2.3.2.0.9 |
systemMaintenanceFailureSend a message to the manager that the system maintence operation
fail. The variable in the variable binding indicates the problem. TRAP-TYPE .1.3.6.1.4.1.6321.1.2.3.2.0.10 |
configChangeThis notification indicates that the configuration data of one module is changed. TRAP-TYPE .1.3.6.1.4.1.6321.1.2.3.2.0.11 |
moduleUpA moduleUp trap signifies that the sending
protocol entity recognizes that one of the
modules represented in the agent's
configuration has come up. TRAP-TYPE .1.3.6.1.4.1.6321.1.2.3.2.0.12 |
moduleDownA moduleDown trap signifies that the sending
protocol entity recognizes a failure in one of
the modules represented in the agent's
configuration. TRAP-TYPE .1.3.6.1.4.1.6321.1.2.3.2.0.13 |
modulePlugInA modulePlugIn trap signifies that the sending
protocol entity recognizes that one module is
plugged into the device. TRAP-TYPE .1.3.6.1.4.1.6321.1.2.3.2.0.14 |
modulePullOutA modulePullOut trap signifies that the sending
protocol entity recognizes one module is pulled out
from the device. TRAP-TYPE .1.3.6.1.4.1.6321.1.2.3.2.0.15 |
powerDC48VAFailureThe trap signifies that the power supply of DC 48V at the
right side of main Chassis (front view) failed. TRAP-TYPE .1.3.6.1.4.1.6321.1.2.3.2.0.16 |
powerDC48VANormalThe trap signifies that the power supply of DC 48V at the
right side of main Chassis (front view) is in normal state. TRAP-TYPE .1.3.6.1.4.1.6321.1.2.3.2.0.17 |
powerDC48VBFailureThe trap signifies that the power supply of DC 48V at the
left side of main Chassis (front view) failed. TRAP-TYPE .1.3.6.1.4.1.6321.1.2.3.2.0.18 |
powerDC48VBNormalThe trap signifies that the power supply of DC 48V at the
left side of main Chassis (front view) is in normal state. TRAP-TYPE .1.3.6.1.4.1.6321.1.2.3.2.0.19 |
extAlarmInputTriggerThe trap signifies that the external alarm input of MSC card
is triggered. TRAP-TYPE .1.3.6.1.4.1.6321.1.2.3.2.0.20 |
extAlarmInputReleaseThe trap signifies that the external alarm input of MSC card
is released. TRAP-TYPE .1.3.6.1.4.1.6321.1.2.3.2.0.21 |
thermalSensorFailureThe trap signifies that the thermal sensor failed. TRAP-TYPE .1.3.6.1.4.1.6321.1.2.3.2.0.22 |
mscSwitchOverOKThe trap signifies that MSC card is switched over successfully. The value of
iesSlotId is the slot ID of the current working MSC. TRAP-TYPE .1.3.6.1.4.1.6321.1.2.3.2.0.23 |
networkTopologyChangeThe trap signifies the network topology is changed. TRAP-TYPE .1.3.6.1.4.1.6321.1.2.3.2.0.24 |
adslAtucLofThe trap signifies ATU-C Loss of Framing. TRAP-TYPE .1.3.6.1.4.1.6321.1.2.3.2.0.25 |
adslAturLofThe trap signifies ATU-R Loss of Framing. TRAP-TYPE .1.3.6.1.4.1.6321.1.2.3.2.0.26 |
adslAtucLosThe trap signifies ATU-C Loss of Signal. TRAP-TYPE .1.3.6.1.4.1.6321.1.2.3.2.0.27 |
adslAturLosThe trap signifies ATU-R Loss of Signal. TRAP-TYPE .1.3.6.1.4.1.6321.1.2.3.2.0.28 |
adslAturLprThe trap signifies ATU-R Loss of Power. TRAP-TYPE .1.3.6.1.4.1.6321.1.2.3.2.0.29 |
adslAtucLofClearThe trap signifies ATU-C Loss of Framing is cleared. TRAP-TYPE .1.3.6.1.4.1.6321.1.2.3.2.0.30 |
adslAturLofClearThe trap signifies ATU-R Loss of Framing is cleared. TRAP-TYPE .1.3.6.1.4.1.6321.1.2.3.2.0.31 |
adslAtucLosClearThe trap signifies ATU-C Loss of Signal is cleared. TRAP-TYPE .1.3.6.1.4.1.6321.1.2.3.2.0.32 |
adslAturLosClearThe trap signifies ATU-R Loss of Signal is cleared. TRAP-TYPE .1.3.6.1.4.1.6321.1.2.3.2.0.33 |
adslAturLprClearThe trap signifies ATU-R Loss of Power is cleared. TRAP-TYPE .1.3.6.1.4.1.6321.1.2.3.2.0.34 |
iesChassis OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.3.98.1 |
RFC1155-SMI Unknown .1.3.6.1.4.1.6321.1.2.3.3.98.1 |
iesNumOfChassisThe number of chassis in the IES-2000/3000 systemro INTEGER .1.3.6.1.4.1.6321.1.2.3.3.98.1.1 |
iesChassisTableThe table which contains the chassis information in IES-2000/3000
system SEQUENCE OF IesChassisEntry .1.3.6.1.4.1.6321.1.2.3.3.98.1.2 |
iesChassisEntry IesChassisEntry .1.3.6.1.4.1.6321.1.2.3.3.98.1.2.1 |
iesChassisIdThe Chassis IDro INTEGER .1.3.6.1.4.1.6321.1.2.3.3.98.1.2.1.1 |
iesChassisFrameNumberThe Frame IDrw INTEGER .1.3.6.1.4.1.6321.1.2.3.3.98.1.2.1.2 |
iesChassisSerialNumberThe Chassis Serial Numberro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.3.98.1.2.1.3 |
iesChassisNumberThe Chassis Number which is defined by the system administrator
for management purposerw INTEGER .1.3.6.1.4.1.6321.1.2.3.3.98.1.2.1.4 |
iesChassisStatusThe current status of the chassis.ro Enumeration .1.3.6.1.4.1.6321.1.2.3.3.98.1.2.1.5 |
iesChassisProductPartNumberProduct part numberro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.3.98.1.2.1.6 |
iesChassisHwRevisionNumberHW revision Numberro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.3.98.1.2.1.7 |
iesChassisCleiCodeCLEI codero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.3.98.1.2.1.8 |
iesChassisHwVersionHardware versionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.3.98.1.2.1.9 |
iesChassisMacAddressMAC addressro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.3.98.1.2.1.10 |
iesChassisVoipDspVersionVoip dsp versionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.3.98.1.2.1.11 |
iesChassisCodecVersionCodec F/W versionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.3.98.1.2.1.12 |
iesSlotTableThe table which contains the slot information in a chassis of
IES-2000/3000 system SEQUENCE OF IesSlotEntry .1.3.6.1.4.1.6321.1.2.3.3.98.1.3 |
iesSlotEntry IesSlotEntry .1.3.6.1.4.1.6321.1.2.3.3.98.1.3.1 |
iesSlotIdIdentity of the slotro INTEGER .1.3.6.1.4.1.6321.1.2.3.3.98.1.3.1.1 |
iesSlotModuleTypeCard type of the plug-in card in IES-2000/3000.ro Enumeration .1.3.6.1.4.1.6321.1.2.3.3.98.1.3.1.2 |
iesSlotModuleDescrThe descriptions of the plug-in card in IES-2000/3000.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.3.98.1.3.1.3 |
iesSlotModuleFWVersionThe firmware version of the plug-in card in IES-2000/3000.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.3.98.1.3.1.4 |
iesSlotModuleDriverVersionThe DSL driver of the plug-in card in IES-2000/3000.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.3.98.1.3.1.5 |
iesSlotModuleModemCodeVersionThe DSL modem code version of the plug-in card in IES-2000/3000ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.3.98.1.3.1.6 |
iesSlotModuleStatusThe module state of the plug-in card in IES-2000/3000ro Enumeration .1.3.6.1.4.1.6321.1.2.3.3.98.1.3.1.7 |
iesSlotModuleAlarmStatusThis variable indicates the alarm status of the module.
It is a bit map represented as a sum, therefore, it can represent
multiple defects simultaneously. The moduleNoDefect should be set
if and only if no other flag is set.
The various bit positions are:
1 moduleNoDefect
2 moduleOverHeat
3 moduleFanRpmLow
4 moduleVoltageLow
5 moduleThermalSensorFailure
6 modulePullOut
7 powerDC48VAFailure
8 powerDC48VBFailure
9 extAlarmInputTrigger
10 moduleDown
11 mscSwitchOverOK
12 networkTopologyChangero INTEGER .1.3.6.1.4.1.6321.1.2.3.3.98.1.3.1.8 |
iesMscPortConfTableThe table contains port configuration information in MSC1000. SEQUENCE OF IesMscPortConfEntry .1.3.6.1.4.1.6321.1.2.3.3.98.1.4 |
iesMscPortConfEntry IesMscPortConfEntry .1.3.6.1.4.1.6321.1.2.3.3.98.1.4.1 |
iesMscPortIdIdentity of the extension slot in MSC1000.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.3.98.1.4.1.1 |
iesMscPortTypePort type of the extension slot in MSC1000.ro Enumeration .1.3.6.1.4.1.6321.1.2.3.3.98.1.4.1.2 |
iesMscPortIfIndexro INTEGER .1.3.6.1.4.1.6321.1.2.3.3.98.1.4.1.3 |
iesMscPortSpeedrw Enumeration .1.3.6.1.4.1.6321.1.2.3.3.98.1.4.1.4 |
iesMscPortDuplexrw Enumeration .1.3.6.1.4.1.6321.1.2.3.3.98.1.4.1.5 |
iesMscPortFlowControlrw Enumeration .1.3.6.1.4.1.6321.1.2.3.3.98.1.4.1.6 |
iesMscPortDefaultVLANTaggingrw Enumeration .1.3.6.1.4.1.6321.1.2.3.3.98.1.4.1.7 |
iesMscPortTrunkGroupIdro INTEGER .1.3.6.1.4.1.6321.1.2.3.3.98.1.4.1.8 |
iesMscPortModeThe operational mode for uplink and subtending ports in MSC. Only
the operational mode of subtending ports can be modified.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.3.98.1.4.1.9 |
iesMscPortVLANTrunkingThe VLAN trunking setting for uplink and subtending ports in MSC.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.3.98.1.4.1.10 |
iesHWMonitor OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.3.98.2 |
iesFanRpmTableA table that contains rpm information about the fans. SEQUENCE OF IesFanRpmEntry .1.3.6.1.4.1.6321.1.2.3.3.98.2.1 |
iesFanRpmEntryA list of rpm information for each fan. IesFanRpmEntry .1.3.6.1.4.1.6321.1.2.3.3.98.2.1.1 |
iesFanRpmIndexThe identity of the fan.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.3.98.2.1.1.1 |
iesFanRpmCurValueThe current rpm of the fan.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.3.98.2.1.1.2 |
iesFanRpmMaxValueThe maximum rpm ever performed by the fan.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.3.98.2.1.1.3 |
iesFanRpmMinValueThe minimum rpm ever performed by the fan.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.3.98.2.1.1.4 |
iesFanRpmLowThreshThe low threshold of the rpm of the fan. If the current rpm is less than
the threshold, the device will initiate the fanRpmLow trap.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.3.98.2.1.1.5 |
iesFanRpmDescrThe description of the fan (e.g. location, function, etc.).ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.3.98.2.1.1.6 |
iesVoltageTableA table that contains voltage information about the system. SEQUENCE OF IesVoltageEntry .1.3.6.1.4.1.6321.1.2.3.3.98.2.2 |
iesVoltageEntryA list of voltage information for each sensor. IesVoltageEntry .1.3.6.1.4.1.6321.1.2.3.3.98.2.2.1 |
iesVoltageIndexThe identity of the sensor.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.3.98.2.2.1.1 |
iesVoltageCurValueThe current voltage detected by the sensor (in milli-voltage).ro INTEGER .1.3.6.1.4.1.6321.1.2.3.3.98.2.2.1.2 |
iesVoltageMaxValueThe maximum voltage ever detected by the sensor (in milli-voltage).ro INTEGER .1.3.6.1.4.1.6321.1.2.3.3.98.2.2.1.3 |
iesVoltageMinValueThe minimum voltage ever detected by the sensor (in milli-voltage).ro INTEGER .1.3.6.1.4.1.6321.1.2.3.3.98.2.2.1.4 |
iesVoltageNominalValueThe nominal voltage which the power should supply (in milli-voltage).ro INTEGER .1.3.6.1.4.1.6321.1.2.3.3.98.2.2.1.5 |
iesVoltageLowThreshThe low threshold of the voltage (in milli-voltage). If the current voltage
is less than the threshold, the device will initiate the voltageLow trap.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.3.98.2.2.1.6 |
iesVoltageDescrThe description of the voltage (e.g. location, nominal value, etc.).ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.3.98.2.2.1.7 |
iesSysTempTableA table that contains temperature information about system. SEQUENCE OF IesSysTempEntry .1.3.6.1.4.1.6321.1.2.3.3.98.2.3 |
iesSysTempEntryA list of temperature information for each sensor. IesSysTempEntry .1.3.6.1.4.1.6321.1.2.3.3.98.2.3.1 |
iesSysTempIndexThe identity of the sensor.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.3.98.2.3.1.1 |
iesSysTempCurValueThe current temperature detected in Celsius by the sensor.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.3.98.2.3.1.2 |
iesSysTempMaxValueThe maximum temperature ever detected in Celsius by the sensor.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.3.98.2.3.1.3 |
iesSysTempMinValueThe minimum temperature ever detected in Celsius by the sensor.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.3.98.2.3.1.4 |
iesSysTempHighThreshThe high threshold of the temperature in Celsius. If the current temperature
is higher than the threshold, the device will initiate the overheat trap.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.3.98.2.3.1.5 |
iesSysTempDescrThe description of the temperature sensor (e.g. location, function, etc.).ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.3.98.2.3.1.6 |
iesSysMgnt OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.3.98.3 |
iesSysState OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.3.98.3.1 |
iesSystemCurrentStatusThis variable indicates the status of the system.
The sysCurrentStatus is a bit map represented
as a sum, therefore, it can represent multiple defects
simultaneously. The sysNoDefect should be set if and only if
no other flag is set.
The various bit positions are:
1 sysNoDefect
2 sysOverHeat
3 sysFanRpmLow
4 sysVoltageLow
5 sysThermalSensorFailure
6 modulePullOut
7 powerDC48VAFailure
8 powerDC48VBFailure
9 extAlarmInputTrigger
10 moduleDown
11 mscSwitchOverOK
12 networkTopologyChangero INTEGER .1.3.6.1.4.1.6321.1.2.3.3.98.3.1.1 |
iesProblemCauseIt describes the problem occurred in the system, e.g. maintenance
operation failures, system reboot, error log, ...etc.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.3.98.3.1.2 |
iesSysMaintenance OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.3.98.3.2 |
iesMaintenanceOpsThe managed object is for system maintenance. When the EMS
wants to trigger the system maitenance operation, the EMS
shall send SNMP-SET message to set the corresponding bit value
to be 1. The various bit positions are:
BIT 1: config save
BIT 2: reset
BIT 3: local loopback test
BIT 4: remote loopback test
BIT 5: clear system alarms
BIT 6: F4 loopback test
BIT 7: F5 loopback test
BIT 8: DSL Line Diagnosticrw INTEGER .1.3.6.1.4.1.6321.1.2.3.3.98.3.2.1 |
iesMaintenanceTargetThe managed object is used for identify the target on which
the maintenance operation should be performed.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.3.98.3.2.2 |
iesMaintenanceDSLConfOpsThe managed object is for xDSL line configuration. When the EMS
wants to issue the desired operation, the EMS
shall send SNMP-SET message to set the corresponding bit value
to be 1. The various bit positions are:
BIT 1: enable port
BIT 2: disable port
BIT 3: set DSL mode
BIT 4: set profile
BIT 5: enable mac filter
BIT 6: disable mac filter
BIT 7: set packet filter
BIT 8: enable dot1x
BIT 9: disable dot1x
BIT 10: set dot1x control
BIT 11: enable dot1x re-authentication
BIT 12: disable dot1x re-authentication
BIT 13: set dot1x re-authentication period
BIT 14: enable mac count filter
BIT 15: disable mac count filter
BIT 16: set mac count filter
BIT 17: set alarm profile
BIT 18: set Annex L (Only in AnnexA)
BIT 19: set power management
BIT 20: set rate adaptation mode
BIT 21: set IGMP filter (Not support after E5-111 v3.0)
BIT 22: enable Annex M
BIT 23: disable Annex Mrw INTEGER .1.3.6.1.4.1.6321.1.2.3.3.98.3.2.3 |
iesMaintenanceDSLConfTargetThe managed object is used for identify the target on which
the line configuration should be performed. The target is encoded
as:
Byte 1: the octet specifies a set of eight Chassis, Chassis 0 through 7
Byte 2~3: each octet specifies a set of eight slots, with the
first octet specifying slots 1 through 8 and the second
octet specifying slots 9 through 16.
Byte 4: reserved
Byte 5~11: each octet specifies a set of eight ports, with the first
octet specifying ports 1 through 8, etc.rw OCTET STRING .1.3.6.1.4.1.6321.1.2.3.3.98.3.2.4 |
iesMaintenanceDSLConfProfileNameThe DSL profile namerw DisplayString .1.3.6.1.4.1.6321.1.2.3.3.98.3.2.5 |
iesMaintenanceDSLConfModeThe DSL mode. The semantic for each bit is:
Bit 1: ADSL, G.lite
Bit 2: ADSL, G.dmt
Bit 3: ADSL, T1.413
Bit 4: ADSL, Auto
Bit 5: ADSL, ETSI
Bit 6: ADSL2,
Bit 7: ADSL2+rw INTEGER .1.3.6.1.4.1.6321.1.2.3.3.98.3.2.6 |
iesMaintenanceDSLConfPktFilterThe packet filter. The semantic for each bit is:
Bit 1: accept all
Bit 2: accept PPPoE only
Bit 3: reject ARP
Bit 4: reject DHCP
Bit 5: reject EAPOL
Bit 6: reject PPPoE
Bit 7: reject NetBIOS
Bit 8: reject IGMP
Bit 9: reject IPrw INTEGER .1.3.6.1.4.1.6321.1.2.3.3.98.3.2.7 |
iesMaintenanceDSLConfDot1xControlThe configuration defines the 802.1x control type.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.3.98.3.2.8 |
iesMaintenanceDSLConfDot1xReauthPeriodThe configuration defines the 802.1x re-authentication period (seconds).rw INTEGER .1.3.6.1.4.1.6321.1.2.3.3.98.3.2.9 |
iesMaintenanceDSLConfMacCountThe configuration defines the number of mac addresses which can pass through the port.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.3.98.3.2.10 |
iesMaintenanceVpiVPI of the channelrw INTEGER .1.3.6.1.4.1.6321.1.2.3.3.98.3.2.11 |
iesMaintenanceVciVCI of the channelrw INTEGER .1.3.6.1.4.1.6321.1.2.3.3.98.3.2.12 |
iesMaintenanceDSLConfAlarmProfileNameThe DSL alarm profile namerw OCTET STRING .1.3.6.1.4.1.6321.1.2.3.3.98.3.2.13 |
iesMaintenanceDSLConfAnnexLThe annex L setting of the ADSL line (Only in AnnexA).rw Enumeration .1.3.6.1.4.1.6321.1.2.3.3.98.3.2.14 |
iesMaintenanceDSLConfPmModeThe power management mode of the ADSL line.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.3.98.3.2.15 |
iesMaintenanceDSLConfRateModeDefines what form of transmit rate adaptation is
configured on this modem. See ADSL Forum TR-005 [3]
for more information.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.3.98.3.2.16 |
iesMaintenanceDSLConfIgmpFilterThe IGMP filter name.rw OCTET STRING .1.3.6.1.4.1.6321.1.2.3.3.98.3.2.17 |
iesSysTimeSetup OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.3.98.3.3 |
iesTimeServerModeThe mechanism of Time Server when the system boots up.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.3.98.3.3.1 |
iesTimeServerIPThe IP Address of Time Serverrw IpAddress .1.3.6.1.4.1.6321.1.2.3.3.98.3.3.2 |
iesSystemTimeThe system timerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.3.98.3.3.3 |
iesSystemDateThe system daterw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.3.98.3.3.4 |
iesSystemTimeZoneThe system time zonerw Enumeration .1.3.6.1.4.1.6321.1.2.3.3.98.3.3.5 |
iesSysAccessControl OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.3.98.3.4 |
iesAccessCtrlTableA table that contains information about service access control. SEQUENCE OF IesAccessCtrlEntry .1.3.6.1.4.1.6321.1.2.3.3.98.3.4.1 |
iesAccessCtrlEntryA list of access control entry. IesAccessCtrlEntry .1.3.6.1.4.1.6321.1.2.3.3.98.3.4.1.1 |
iesAccessCtrlServiceThe service type of the access control entry.ro Enumeration .1.3.6.1.4.1.6321.1.2.3.3.98.3.4.1.1.1 |
iesAccessCtrlEnableEnable or disable the service.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.3.98.3.4.1.1.2 |
iesAccessCtrlPortThe port number which the service uses.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.3.98.3.4.1.1.3 |
iesMaxNumOfSecuredClientsThe maximum number of sets of secured clients.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.3.98.3.4.2 |
iesSecuredClientTableA table that contains information about secured clients. SEQUENCE OF IesSecuredClientEntry .1.3.6.1.4.1.6321.1.2.3.3.98.3.4.3 |
iesSecuredClientEntryA list of secured client entry. IesSecuredClientEntry .1.3.6.1.4.1.6321.1.2.3.3.98.3.4.3.1 |
iesSecuredClientStartIpThe starting IP address of a set of secured clients.ro IpAddress .1.3.6.1.4.1.6321.1.2.3.3.98.3.4.3.1.1 |
iesSecuredClientEndIpThe ending IP address of a set of secured clients.ro IpAddress .1.3.6.1.4.1.6321.1.2.3.3.98.3.4.3.1.2 |
iesSecuredClientServiceEach bit corresponds to a service. The bit is set to 1 if the
service is enabled, and set to 0 if the service is disabled.
The various bit positions are:
BIT 1: telnet
BIT 2: FTP
BIT 3: web
BIT 4: ICMPrw INTEGER .1.3.6.1.4.1.6321.1.2.3.3.98.3.4.3.1.3 |
iesSecuredClientRowStatusThis object is used to create a new row or modify or delete an existing row
in this table. A row is activated by setting this object to `active', and is
deactivated by setting it to 'notInService'.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.3.98.3.4.3.1.4 |
iesSysStaticRoute OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.3.98.3.5 |
iesMaxNumOfStaticRoutesThe maximum number of static routes.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.3.98.3.5.1 |
iesStaticRouteTableA table that contains information about static routes. SEQUENCE OF IesStaticRouteEntry .1.3.6.1.4.1.6321.1.2.3.3.98.3.5.2 |
iesStaticRouteEntryA list of static route entry. IesStaticRouteEntry .1.3.6.1.4.1.6321.1.2.3.3.98.3.5.2.1 |
iesStaticRouteNameThe name of the static route.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.3.98.3.5.2.1.1 |
iesStaticRouteDestThe destination IP address of the static route.rw IpAddress .1.3.6.1.4.1.6321.1.2.3.3.98.3.5.2.1.2 |
iesStaticRouteMaskThe subnet mask of the static route.rw IpAddress .1.3.6.1.4.1.6321.1.2.3.3.98.3.5.2.1.3 |
iesStaticRouteGatewayThe gateway IP address of the static route.rw IpAddress .1.3.6.1.4.1.6321.1.2.3.3.98.3.5.2.1.4 |
iesStaticRouteMetricThe routing metric of the static route.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.3.98.3.5.2.1.5 |
iesStaticRouteRowStatusThis object is used to create a new row or modify or delete an existing row
in this table. A row is activated by setting this object to `active', and is
deactivated by setting it to 'notInService'.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.3.98.3.5.2.1.6 |
iesSyslogSetup OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.3.98.3.6 |
iesSysLogEnableEnable/disable syslog function.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.3.98.3.6.1 |
iesSysLogServerIP address of the syslog server.rw IpAddress .1.3.6.1.4.1.6321.1.2.3.3.98.3.6.2 |
iesSysLogFacilityLog facility used by the syslog function.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.3.98.3.6.3 |
iesSysDhcpSetup OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.3.98.3.7 |
iesDhcpRelayEnableEnable/disable DHCP relay function.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.3.98.3.7.1 |
iesDhcpRelayOption82EnableEnable/disable DHCP relay Option82 function.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.3.98.3.7.2 |
iesDhcpRelayOption82InfoUser specific Option82 information.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.3.98.3.7.3 |
iesMaxNumOfDhcpServersThe maximum number of DHCP servers.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.3.98.3.7.4 |
iesDhcpServerTableA table that contains DHCP server information. SEQUENCE OF IesDhcpServerEntry .1.3.6.1.4.1.6321.1.2.3.3.98.3.7.5 |
iesDhcpServerEntryThe entry of DHCP server table. IesDhcpServerEntry .1.3.6.1.4.1.6321.1.2.3.3.98.3.7.5.1 |
iesDhcpServerIpThe IP address of the DHCP server.ro IpAddress .1.3.6.1.4.1.6321.1.2.3.3.98.3.7.5.1.1 |
iesDhcpServerRowStatusThe row status of the DHCP server entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.3.98.3.7.5.1.2 |
iesSysSNMPSetup OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.3.98.3.8 |
iesMaxNumberOfTrapDestinationsThe max number of the trap destinations.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.3.98.3.8.1 |
iesSNMPTrapDestTableA table that contains SNMP trap destination information. SEQUENCE OF IesSNMPTrapDestEntry .1.3.6.1.4.1.6321.1.2.3.3.98.3.8.2 |
iesSNMPTrapDestEntryThe entry of SNMP trap destination table. IesSNMPTrapDestEntry .1.3.6.1.4.1.6321.1.2.3.3.98.3.8.2.1 |
iesTrapDestIpThe IP address of the trap destination.ro IpAddress .1.3.6.1.4.1.6321.1.2.3.3.98.3.8.2.1.1 |
iesTrapDestPortThe UDP port of the trap destination.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.3.98.3.8.2.1.2 |
iesTrapDestRowStatusThe row status of the trap destination entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.3.98.3.8.2.1.3 |
iesSnmpGetCommunityThe SNMP get community.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.3.98.3.8.3 |
iesSnmpSetCommunityThe SNMP set community.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.3.98.3.8.4 |
iesSnmpTrapCommunityThe SNMP trap community.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.3.98.3.8.5 |
iesSysDot1xSetup OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.3.98.3.9 |
iesMaxNumberOfRadiusServersThe max number of the RADIUS Servers.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.3.98.3.9.1 |
iesRadiusServerTableA table that contains Radius Server information. SEQUENCE OF IesRadiusServerEntry .1.3.6.1.4.1.6321.1.2.3.3.98.3.9.2 |
iesRadiusServerEntryThe entry of Radius Server table. IesRadiusServerEntry .1.3.6.1.4.1.6321.1.2.3.3.98.3.9.2.1 |
iesRadiusServerIndexThe identity of the RADIUS server.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.3.98.3.9.2.1.1 |
iesRadiusServerIpThe IP address of the Radius Server.rw IpAddress .1.3.6.1.4.1.6321.1.2.3.3.98.3.9.2.1.2 |
iesRadiusServerPortThe UDP port of the Radius Server.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.3.98.3.9.2.1.3 |
iesRadiusSharedSecretThe shared secret of the Radius Server.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.3.98.3.9.2.1.4 |
iesRadiusServerRowStatusThe row status of the Radius Server entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.3.98.3.9.2.1.5 |
iesDot1xEnableEnable/disable the 802.1x function.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.3.98.3.9.3 |
iesDot1xPortTableThis table includes the configuration of 802.1x. SEQUENCE OF IesDot1xPortEntry .1.3.6.1.4.1.6321.1.2.3.3.98.3.9.4 |
iesDot1xPortEntryAn entry in iesDot1xPortTable. IesDot1xPortEntry .1.3.6.1.4.1.6321.1.2.3.3.98.3.9.4.1 |
iesDot1xPortEnableThe option defines if the port enables 802.1x
settings.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.3.98.3.9.4.1.1 |
iesDot1xPortControlThe configuration defines the 802.1x port control
type.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.3.98.3.9.4.1.2 |
iesDot1xPortReAuthEnableThe option defines if the port enables 802.1x
re-authentication.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.3.98.3.9.4.1.3 |
iesDot1xPortReAuthPeriodThe configuration defines the 802.1x
re-authentication period (seconds) for each port.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.3.98.3.9.4.1.4 |
iesSysMacFilter OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.3.98.3.10 |
iesMacFilterStatusTableThis table includes the status of mac filtering for each port. SEQUENCE OF IesMacFilterStatusEntry .1.3.6.1.4.1.6321.1.2.3.3.98.3.10.1 |
iesMacFilterStatusEntryAn entry in iesMacFilterStatusTable. IesMacFilterStatusEntry .1.3.6.1.4.1.6321.1.2.3.3.98.3.10.1.1 |
iesMacFilterStatusEnableThe option defines if the port enables mac filtering.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.3.98.3.10.1.1.1 |
iesMaxNumberOfMacFiltersThe max number of the mac filters in the system.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.3.98.3.10.2 |
iesMaxNumberOfMacFiltersPerPortThe max number of the mac filters for each port.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.3.98.3.10.3 |
iesCurrNumberOfMacFiltersThe current number of the mac filters in the system.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.3.98.3.10.4 |
iesMacFilterTableA table that contains the mac filtering information. SEQUENCE OF IesMacFilterEntry .1.3.6.1.4.1.6321.1.2.3.3.98.3.10.5 |
iesMacFilterEntryThe entry of iesMacFilterTable. IesMacFilterEntry .1.3.6.1.4.1.6321.1.2.3.3.98.3.10.5.1 |
iesMacFilterMacAddrThe mac address which can pass through the port.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.3.98.3.10.5.1.1 |
iesMacFilterRowStatusThe row status of the entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.3.98.3.10.5.1.2 |
iesSysPacketFilter OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.3.98.3.11 |
iesPacketFilterTableThis table includes packet filtering for each port. SEQUENCE OF IesPacketFilterEntry .1.3.6.1.4.1.6321.1.2.3.3.98.3.11.1 |
iesPacketFilterEntryAn entry in iesPacketFilterTable. IesPacketFilterEntry .1.3.6.1.4.1.6321.1.2.3.3.98.3.11.1.1 |
iesPacketFilterThe packet filter. The semantic for each bit is:
Bit 1: accept all
Bit 2: accept PPPoE only
Bit 3: reject ARP
Bit 4: reject DHCP
Bit 5: reject EAPOL
Bit 6: reject PPPoE
Bit 7: reject NetBIOS
Bit 8: reject IGMP
Bit 9: reject IPrw INTEGER .1.3.6.1.4.1.6321.1.2.3.3.98.3.11.1.1.1 |
iesSysMacCountFilter OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.3.98.3.12 |
iesMacCountFilterTableThis table includes mac count filtering for each port. SEQUENCE OF IesMacCountFilterEntry .1.3.6.1.4.1.6321.1.2.3.3.98.3.12.1 |
iesMacCountFilterEntryAn entry in iesMacCountFilterTable. IesMacCountFilterEntry .1.3.6.1.4.1.6321.1.2.3.3.98.3.12.1.1 |
iesMacCountFilterStatusThe option defines if the port enables mac count filtering.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.3.98.3.12.1.1.1 |
iesMacCountFilterCountThe number of mac addresses which can pass through the port.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.3.98.3.12.1.1.2 |
iesSysMulticastGroup OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.3.98.3.13 |
iesMaxNumberOfMulticastGroupsThe max number of static multicast groups in the system.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.3.98.3.13.1 |
iesMulticastGroupTableA table that contains static multicast group information. SEQUENCE OF IesMulticastGroupEntry .1.3.6.1.4.1.6321.1.2.3.3.98.3.13.2 |
iesMulticastGroupEntryThe entry of multicast group table. IesMulticastGroupEntry .1.3.6.1.4.1.6321.1.2.3.3.98.3.13.2.1 |
iesMulticastGroupMacAddrThe multicast MAC address of the group.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.3.98.3.13.2.1.1 |
iesMulticastGroupPortsThe port list which specifies the ports joining the multicast group.rw PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.6321.1.2.3.3.98.3.13.2.1.2 |
iesMulticastGroupRowStatusThe row status of the multicast group entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.3.98.3.13.2.1.3 |
iesSysIgmpFilter OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.3.98.3.14 |
iesMaxNumberOfIgmpFiltersThe max number of IGMP filters in the system.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.3.98.3.14.1 |
iesIgmpFilterTableA table that contains IGMP filters. SEQUENCE OF IesIgmpFilterEntry .1.3.6.1.4.1.6321.1.2.3.3.98.3.14.2 |
iesIgmpFilterEntryThe entry of IGMP filter table. IesIgmpFilterEntry .1.3.6.1.4.1.6321.1.2.3.3.98.3.14.2.1 |
iesIgmpFilterNameThe IGMP filter name.ro OCTET STRING .1.3.6.1.4.1.6321.1.2.3.3.98.3.14.2.1.1 |
iesIgmpFilterIndexThe index which specifies the filter rule.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.3.98.3.14.2.1.2 |
iesIgmpFilterStartIpThe start IP of the filter rule.rw IpAddress .1.3.6.1.4.1.6321.1.2.3.3.98.3.14.2.1.3 |
iesIgmpFilterEndIpThe end IP of the filter rule.rw IpAddress .1.3.6.1.4.1.6321.1.2.3.3.98.3.14.2.1.4 |
iesIgmpFilterRowStatusThe row status of the IGMP filter entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.3.98.3.14.2.1.5 |
iesIgmpFilterPortTableThis table specifies the IGMP filter of the port. SEQUENCE OF IesIgmpFilterPortEntry .1.3.6.1.4.1.6321.1.2.3.3.98.3.14.3 |
iesIgmpFilterPortEntryAn entry in iesIgmpFilterPortTable. IesIgmpFilterPortEntry .1.3.6.1.4.1.6321.1.2.3.3.98.3.14.3.1 |
iesIgmpFilterPortFilterThe IGMP filter of the port.rw OCTET STRING .1.3.6.1.4.1.6321.1.2.3.3.98.3.14.3.1.1 |
iesL2SW OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.3.98.4 |
iesIGMPSnoopingEnabledA flag indicating whether IGMP snooping function is enabled or not.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.3.98.4.1 |
iesManagementVLANIdThe VLAN ID for management.rw INTEGER .1.3.6.1.4.1.6321.1.2.3.3.98.4.2 |
iesMaxNumOfStaticVlansThe maximum number of static VLANs supported by the system.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.3.98.4.3 |
iesMaxNumOfTrunkGroupsThe maximum number of trunk groups.ro INTEGER .1.3.6.1.4.1.6321.1.2.3.3.98.4.4 |
iesTrunkGroupTableA table that contains trunk group configuration. SEQUENCE OF IesTrunkGroupEntry .1.3.6.1.4.1.6321.1.2.3.3.98.4.5 |
iesTrunkGroupEntryThe entry of trunk group table IesTrunkGroupEntry .1.3.6.1.4.1.6321.1.2.3.3.98.4.5.1 |
iesTrunkGroupIdThe ID of the trunk groupro INTEGER .1.3.6.1.4.1.6321.1.2.3.3.98.4.5.1.1 |
iesTrunkGroupNameThe name of the trunk grouprw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.3.98.4.5.1.2 |
iesTrunkGroupPortsThe port list of the trunk grouprw PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.6321.1.2.3.3.98.4.5.1.3 |
iesTrunkGroupRowStatusThe row status of the trunk group entryrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.3.98.4.5.1.4 |
iesPortIsolationEnableA flag indicating whether VLAN port isolation function is enabled or not.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.3.98.4.6 |
iesRSTPEnableEnable/Disable RSTP.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.3.98.4.7 |
iesSwitchModeSwitch DSLAM's operatrion Mode.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.3.98.4.8 |