RC-2K-ATM-MIB
AI MIB Summary
The RC-2K-ATM-MIB facilitates the monitoring and management of Accelar ATM network appliances, specifically tracking Asynchronous Transfer Mode (ATM) interface statistics, virtual circuit (PVC/SVC) states, and cell loss metrics. This module enables the collection of performance counters and fault alarms essential for maintaining ATM network integrity and troubleshooting connectivity issues within the Accelar product family.
Enterprise MIB for the Accelar product family.
Main OID:
rc2kAtmMib.1.3.6.1.4.1.2272.1.100.9.0
96
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
96 total| Object Name |
|---|
rc2kAtmMibEnterprise MIB for the Accelar product family. MODULE-IDENTITY .1.3.6.1.4.1.2272.1.100.9.0 |
rc2kAtmGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.100.9.1 |
rc2kAtmElanStatsClearAllClear all Elan Statisticsrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.100.9.1.1 |
rc2kAtmPortTableATM port table SEQUENCE OF Rc2kAtmPortEntry .1.3.6.1.4.1.2272.1.100.9.2 |
rc2kAtmPortEntryEntry containing infomation of ATM port Rc2kAtmPortEntry .1.3.6.1.4.1.2272.1.100.9.2.1 |
rc2kAtmPortIfIndexport numberro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2272.1.100.9.2.1.1 |
rc2kAtmPortNumVpiBits# of vpi bits. For OC3, the max number of vpibits is 6.
However, for OC12, it is 8. Both media types share
the same MIB object.rw INTEGER .1.3.6.1.4.1.2272.1.100.9.2.1.2 |
rc2kAtmPortNumVciBits# of vci bitsrw INTEGER .1.3.6.1.4.1.2272.1.100.9.2.1.3 |
rc2kAtmPortMediaTypemedia typero Enumeration .1.3.6.1.4.1.2272.1.100.9.2.1.4 |
rc2kAtmPortScrambleEnableenable scramblerw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.100.9.2.1.5 |
rc2kAtmPortFramingModeport framing moderw Enumeration .1.3.6.1.4.1.2272.1.100.9.2.1.6 |
rc2kAtmPortClockSourceclock sourcerw Enumeration .1.3.6.1.4.1.2272.1.100.9.2.1.7 |
rc2kAtmPortLineSpeedline speedro Enumeration .1.3.6.1.4.1.2272.1.100.9.2.1.8 |
rc2kAtmPortLoopBackModeloop back moderw Enumeration .1.3.6.1.4.1.2272.1.100.9.2.1.9 |
rc2kAtmPortMacAddressXLR assigned MAC addrro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2272.1.100.9.2.1.10 |
rc2kAtmPvcTableATM Pvc table SEQUENCE OF Rc2kAtmPvcEntry .1.3.6.1.4.1.2272.1.100.9.3 |
rc2kAtmPvcEntryEntry containing infomation of ATM Pvc Rc2kAtmPvcEntry .1.3.6.1.4.1.2272.1.100.9.3.1 |
rc2kAtmPvcIfIndexport numberro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2272.1.100.9.3.1.1 |
rc2kAtmPvcVpivpi of this pvcro INTEGER .1.3.6.1.4.1.2272.1.100.9.3.1.2 |
rc2kAtmPvcVcivci of this pvcro INTEGER .1.3.6.1.4.1.2272.1.100.9.3.1.3 |
rc2kAtmPvcPvcIdinternal pvc idro Integer32 .1.3.6.1.4.1.2272.1.100.9.3.1.4 |
rc2kAtmPvcNamename of pvcrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2272.1.100.9.3.1.5 |
rc2kAtmPvcEncapsulationencapsulationrw Enumeration .1.3.6.1.4.1.2272.1.100.9.3.1.6 |
rc2kAtmPvcServiceTypeservice typerw Enumeration .1.3.6.1.4.1.2272.1.100.9.3.1.7 |
rc2kAtmPvcPeakCellRatePeak cell rate in cells per second. The maximum
peak cell rate is half of the line rate. The peak
cell rate for MDA type OC12 must be less than 733491.
However, for OC3, it is less than 182783.rw INTEGER .1.3.6.1.4.1.2272.1.100.9.3.1.8 |
rc2kAtmPvcSustainedCellRateSustained cell rate in cells per second. The maximum
peak cell rate is half of the line rate. The peak
cell rate for MDA type OC12 must be less than 733491.
However, for OC3, it is less than 182783.rw INTEGER .1.3.6.1.4.1.2272.1.100.9.3.1.9 |
rc2kAtmPvcMaxBurstSizemax burst sizerw INTEGER .1.3.6.1.4.1.2272.1.100.9.3.1.10 |
rc2kAtmPvcRowStatusrow statusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.100.9.3.1.11 |
rc2kAtmPvcOamLbMgmtEnableIndicate whether end-to-end F5 OAM loopback is enabled.
When it is enabled, OAM loopback request is sent
periodicallyrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.100.9.3.1.12 |
rc2kAtmPvcOamLbSendFrequencyNumber of seconds between transmitting OAM loopback
requestrw INTEGER .1.3.6.1.4.1.2272.1.100.9.3.1.13 |
rc2kAtmPvcOamLbRetryFrequencyNumber of seconds between retryrw INTEGER .1.3.6.1.4.1.2272.1.100.9.3.1.14 |
rc2kAtmPvcOamLbUpCountNumber of consecutive end-to-end F5 OAM loopback cell
responses that must be received in order to change a
PVC connection state to uprw INTEGER .1.3.6.1.4.1.2272.1.100.9.3.1.15 |
rc2kAtmPvcOamLbDownCountNumber of consecutive end-to-end F5 OAM loopback cell
responses that are not received in order to change a
PVC state to down.rw INTEGER .1.3.6.1.4.1.2272.1.100.9.3.1.16 |
rc2kAtmPvcOamTrapEnableIndicate whether OAM trap is enabled. When it is enabled,
a trap is sent to the management station when
rc2kAtmPvcOamVcStatus is going up or down.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.100.9.3.1.17 |
rc2kAtmPvcOamVcStatusIndicate the status of PVC link.
Not Managed
Down Verify
loopback cells are sent at retry frequency to verify
the VC is really down. After down-count unsuccessful
retries, the VC goes to the down state (see definition
of rc2kAtmPvcOamLoopbackDownCount).
Down
F5 OAM loopback cells.
Up Verify
End-to-end F5 OAM loopback cells are sent at retry
frequency to verify the VC is really up. After up-count
successive and successful loopback retries, the VC
goes to the Up state (see definition of
rc2kAtmPvcOamLoopbackUpCount).
Up - End-to-end loopbacks are successful.ro Enumeration .1.3.6.1.4.1.2272.1.100.9.3.1.18 |
rc2kAtmPvcOamLbRequestSentNumber of OAM loopback request sentro Counter32 .1.3.6.1.4.1.2272.1.100.9.3.1.19 |
rc2kAtmPvcOamLbReplySentNumber of OAM loopback reply sentro Counter32 .1.3.6.1.4.1.2272.1.100.9.3.1.20 |
rc2kAtmPvcOamLbReplyReceivedNumber of OAM loopback reply receivedro Counter32 .1.3.6.1.4.1.2272.1.100.9.3.1.21 |
rc2kAtm1483ElanTableATM 1483Elan table SEQUENCE OF Rc2kAtm1483ElanEntry .1.3.6.1.4.1.2272.1.100.9.5 |
rc2kAtm1483ElanEntryEntry containing infomation of ATM 1483Elan Rc2kAtm1483ElanEntry .1.3.6.1.4.1.2272.1.100.9.5.1 |
rc2kAtm1483ElanIfIndexport numberro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2272.1.100.9.5.1.1 |
rc2kAtm1483ElanElanIdElan Idro Integer32 .1.3.6.1.4.1.2272.1.100.9.5.1.2 |
rc2kAtm1483ElanNumPvcIds# pvc-ids in listro INTEGER .1.3.6.1.4.1.2272.1.100.9.5.1.3 |
rc2kAtm1483ElanPvcIdslist of pvc-ids. each pvc-id is represented by a
32 bit value this field can contain a maximum of
64 pvc-ids.rw IdList .1.3.6.1.4.1.2272.1.100.9.5.1.4 |
rc2kAtm1483ElanVlanIdvlan tag for this 1483rw Integer32 .1.3.6.1.4.1.2272.1.100.9.5.1.5 |
rc2kAtm1483ElanRowStatusrow statusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.100.9.5.1.6 |
rc2kAtm1483ElanConnectTypeconnection typerw Enumeration .1.3.6.1.4.1.2272.1.100.9.5.1.7 |
rc2kAtm1483ElanVlanMacAddressmac for vlanro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2272.1.100.9.5.1.8 |
rc2kAtm1483ElanDummyMacAddressdummy mac for the other routerro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2272.1.100.9.5.1.9 |
rc2kAtm1483ElanLocalIpAddresslocal ip, if ConnectType is ip(2)rw IpAddress .1.3.6.1.4.1.2272.1.100.9.5.1.10 |
rc2kAtm1483ElanRemoteIpAddressremote ip, if ConnectType is ip(2)rw IpAddress .1.3.6.1.4.1.2272.1.100.9.5.1.11 |
rc2kAtm1483ElanInArpSendEnableenable arp sending on the port, if
ConnectType is ip(2)rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.100.9.5.1.12 |
rc2kAtm1483ElanInArpSendIntervalinterval of arp sending on the port, if
ConnectType is ip(2)rw INTEGER .1.3.6.1.4.1.2272.1.100.9.5.1.13 |
rc2kAtm1483ElanIpxVlanEncapMethodvlan encapsulation method, if ConnectType
is ipx(3)rw Enumeration .1.3.6.1.4.1.2272.1.100.9.5.1.14 |
rc2kAtm1483ElanIpxNetworkNumnetwork number, if ConnectType is ipx(3)rw INTEGER .1.3.6.1.4.1.2272.1.100.9.5.1.15 |
rc2kAtm1483ElanStgIdAn identifier used to identify a STG in the device,
only in bridge modero Integer32 .1.3.6.1.4.1.2272.1.100.9.5.1.16 |
rc2kAtm1483ElanrcStgTaggedBpduVlanIdThe VLAN ID to be used for tagging BPDUs,
only in bridge mode.ro Integer32 .1.3.6.1.4.1.2272.1.100.9.5.1.17 |
rc2kAtm1483ElanIpxNetworkAddrnetwork number, instead of rc2kAtm1483ElanIpxNetworkNumrw OCTET STRING .1.3.6.1.4.1.2272.1.100.9.5.1.18 |
rc2kAtmSioCardConfigTable2kAtm Sio Card Config Table SEQUENCE OF Rc2kAtmSioCardConfigEntry .1.3.6.1.4.1.2272.1.100.9.8 |
rc2kAtmSioCardConfigEntryEntry containing infomation of 2kAtm Sio Card Config. Rc2kAtmSioCardConfigEntry .1.3.6.1.4.1.2272.1.100.9.8.1 |
rc2kAtmSioCardConfigSlotIndexslot Index.ro Integer32 .1.3.6.1.4.1.2272.1.100.9.8.1.1 |
rc2kAtmSioCardConfigActionrw Enumeration .1.3.6.1.4.1.2272.1.100.9.8.1.2 |
rc2kAtmSioCardConfigTraceModerw Enumeration .1.3.6.1.4.1.2272.1.100.9.8.1.3 |
rc2kAtmSioCardConfigImageFileNameATM Image file name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2272.1.100.9.8.1.4 |
rc2kAtmSioCardConfigElanStatsEnableEnable/Disable Elan Statistics collectionrw Enumeration .1.3.6.1.4.1.2272.1.100.9.8.1.5 |
rc2kAtmSioCardConfigStatsPollPeriodTime interval after which Elan statistics would
be polledrw INTEGER .1.3.6.1.4.1.2272.1.100.9.8.1.6 |
rc2kAtmPortStatsTableATM port statistics table SEQUENCE OF Rc2kAtmPortStatsEntry .1.3.6.1.4.1.2272.1.100.9.10 |
rc2kAtmPortStatsEntryEntry containing infomation of ATM port statistics Rc2kAtmPortStatsEntry .1.3.6.1.4.1.2272.1.100.9.10.1 |
rc2kAtmPortStatsIfIndexport numberro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2272.1.100.9.10.1.1 |
rc2kAtmPortStatsInCellsNumber of Cells received from ATM interfacero Counter64 .1.3.6.1.4.1.2272.1.100.9.10.1.2 |
rc2kAtmPortStatsOutCellsNumber of Cells transmitted by ATM interfacero Counter64 .1.3.6.1.4.1.2272.1.100.9.10.1.3 |
rc2kAtmPortStatsOutIdleCellsNumber of Idle Cells transmittedro Counter64 .1.3.6.1.4.1.2272.1.100.9.10.1.4 |
rc2kAtmPortStatsInHecCorrectedNumber of received cells in which HCS
was correctedro Counter32 .1.3.6.1.4.1.2272.1.100.9.10.1.5 |
rc2kAtmPortStatsInHecUncorrectedNumber of received cells dropped because HCS
couldn't be correctedro Counter32 .1.3.6.1.4.1.2272.1.100.9.10.1.6 |
rc2kAtmPortStatsInUnknownProtosNumber of received cells dropped with wrong VPI/VCIro Counter32 .1.3.6.1.4.1.2272.1.100.9.10.1.7 |
rc2kAtmPortStatsInPktsNumber of AAL5 CPCS PDUs receivedro Counter32 .1.3.6.1.4.1.2272.1.100.9.10.1.8 |
rc2kAtmPortStatsOutPktsNumber of AAL5 CPCS PDUs transmittedro Counter32 .1.3.6.1.4.1.2272.1.100.9.10.1.9 |
rc2kAtmPortStatsInDroppedPktsNumber of AAL5 CPCS PDUs dropped due to
resource exhaustionro Counter32 .1.3.6.1.4.1.2272.1.100.9.10.1.10 |
rc2kAtmPortStatsOutDroppedPktsNumber of AAL5 CPCS PDUs dropped because the
transmitter closed the channelro Counter32 .1.3.6.1.4.1.2272.1.100.9.10.1.11 |
rc2kAtmVPortStatsTableATM Elan statistics table SEQUENCE OF Rc2kAtmVPortStatsEntry .1.3.6.1.4.1.2272.1.100.9.11 |
rc2kAtmVPortStatsEntryEntry containing infomation of ATM Elan statistics Rc2kAtmVPortStatsEntry .1.3.6.1.4.1.2272.1.100.9.11.1 |
rc2kAtmVPortStatsIfIndexport numberro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2272.1.100.9.11.1.1 |
rc2kAtmVPortStatsVlanIdVlan Idro Integer32 .1.3.6.1.4.1.2272.1.100.9.11.1.2 |
rc2kAtmVPortStatsClearClear Elan Statsrw Enumeration .1.3.6.1.4.1.2272.1.100.9.11.1.3 |
rc2kAtmVPortStatsInOctetsAAL5 CPCS PDU octects received from ATM interfacero Counter64 .1.3.6.1.4.1.2272.1.100.9.11.1.4 |
rc2kAtmVPortStatsOutOctetsAAL5 CPCS PDU octects transmitted out of ATM interfacero Counter64 .1.3.6.1.4.1.2272.1.100.9.11.1.5 |
rc2kAtmVPortStatsInErrorsAAL5 CPCS PDUs received with errors from ATM interface.
These errors include CRC-32 errors,SAR time-out errors
And oversized SDU errorsro Counter32 .1.3.6.1.4.1.2272.1.100.9.11.1.6 |
rc2kAtmVPortStatsOutErrorsNumber of AAL5 CPCS PDUs that couldn't be transmitted
due to errorsro Counter32 .1.3.6.1.4.1.2272.1.100.9.11.1.7 |
rc2kAtmVPortStatsInDiscardsNumber of received AAL5 CPCS PDUs discardedro Counter32 .1.3.6.1.4.1.2272.1.100.9.11.1.8 |
rc2kAtmVPortStatsOutDiscardsNumber of AAL5 CPCS PDUs which are to be transmitted
but discardedro Counter32 .1.3.6.1.4.1.2272.1.100.9.11.1.9 |
rc2kAtmVPortStatsInUcastPktsReceived ethernet/IP/IPX packets whose destination
address is neither a multicast nor a broadcast
addressro Counter32 .1.3.6.1.4.1.2272.1.100.9.11.1.10 |
rc2kAtmVPortStatsOutUcastPktsForwarded ethernet/IP/IPX packets whose destination
address is neither a multicast nor a broadcast
addressro Counter32 .1.3.6.1.4.1.2272.1.100.9.11.1.11 |
rc2kAtmVPortStatsInMulticastPktsReceived ethernet/IP/IPX packets whose destination
MAC address(or IP address in case of IP ELAN type)
is multicast MAC address or class D IP address
(in case of IP ELAN type)ro Counter32 .1.3.6.1.4.1.2272.1.100.9.11.1.12 |
rc2kAtmVPortStatsOutMulticastPktsForwarded ethernet/IP/IPX packets whose destination
MAC address(or IP address in case of IP ELAN type)
is multicast MAC address or class D IP address
(in case of IP ELAN type)ro Counter32 .1.3.6.1.4.1.2272.1.100.9.11.1.13 |
rc2kAtmVPortStatsInBroadcastPktsReceived ethernet/IP/IPX packets whose destination
address in broadcast addressro Counter32 .1.3.6.1.4.1.2272.1.100.9.11.1.14 |
rc2kAtmVPortStatsOutBroadcastPktsForwarded ethernet/IP/IPX packets whose destination
address in broadcast addressro Counter32 .1.3.6.1.4.1.2272.1.100.9.11.1.15 |