RAPID-CITY-VSP
AI MIB Summary
The RAPID-CITY-VSP MIB provides enterprise-level monitoring and management capabilities for the Accelar product family, enabling the collection of performance metrics, interface statistics, and system health data for Accelar network appliances. This module facilitates the tracking of device availability, traffic throughput, and operational states specific to Accelar's hardware and software implementations.
Enterprise MIB for the Accelar product family.
Main OID:
rapidCity.1.3.6.1.4.1.2272
5364
Objects
Active
Status
15
Dependencies
Imported Objects
Objects
5364 total| Object Name |
|---|
internet OBJECT IDENTIFIER .1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1 |
snmpV2 OBJECT IDENTIFIER .1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.6 |
snmpModules OBJECT IDENTIFIER .1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.6.3 |
snmpMIB OBJECT IDENTIFIER .1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.6.3.1 |
snmpMIBObjects OBJECT IDENTIFIER .1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.6.3.1.1 |
snmpTraps OBJECT IDENTIFIER .1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.6.3.1.1.5 |
rapidCityEnterprise MIB for the Accelar product family. MODULE-IDENTITY .1.3.6.1.4.1.2272 |
rcMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1 |
rcSystem OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.1 |
rcSysIpAddrThis entity's IP address.ro IpAddress .1.3.6.1.4.1.2272.1.1.1 |
rcSysNetMaskThis entity's subnet mask.ro IpAddress .1.3.6.1.4.1.2272.1.1.2 |
rcSysBroadcastThis entity's broadcast address.ro IpAddress .1.3.6.1.4.1.2272.1.1.3 |
rcSysVersionSoftware version running on devicero DisplayString .1.3.6.1.4.1.2272.1.1.7 |
rcSysResultResult from the last system action.ro Enumeration .1.3.6.1.4.1.2272.1.1.9 |
rcSysLastChangeLast management initiated configuration
change since sysUpTime.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2272.1.1.10 |
rcSysLastVlanChangeLast management initiated VLAN configuration
change since sysUpTime.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2272.1.1.11 |
rcSysLastStatisticsResetLast management initiated statistics reset
since sysUpTime.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2272.1.1.12 |
rcSysBufferUtilBuffer utilization as a percentage of the
total amount of buffer space in the system.
A high value indicates congestion.ro INTEGER .1.3.6.1.4.1.2272.1.1.13 |
rcSysBufferUtilPeakThe largest buffer utilization since sysUpTimero INTEGER .1.3.6.1.4.1.2272.1.1.14 |
rcSysBufferUtilPeakTimeTimestamp for rcSysPeakBandwidthro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2272.1.1.15 |
rcSysNVRamSizeTotal Non-volatile RAM in Kbytesro Gauge32 .1.3.6.1.4.1.2272.1.1.16 |
rcSysNVRamUsedNon-volatile RAM in use in Kbytesro Gauge32 .1.3.6.1.4.1.2272.1.1.17 |
rcSysLastSaveToNVRamSysUpTime of the last time when NVRAM was
written to. This could be a save of the system
configuration or via a file transfer of a
configuration file.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2272.1.1.18 |
rcSysLastSaveToStandbyNVRamSysUpTime of the last time when the standby NVRAM
(on the back-up CPU board) was written to.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2272.1.1.19 |
rcSysCpuUtilPercentage of CPU utilization.
This object is not supported on VSP. VSP uses
rcKhiSlotCpuCurrentUtilrodeprecated Gauge32 .1.3.6.1.4.1.2272.1.1.20 |
rcSysRmonMemSizeAmount of RAM in bytes to allocate for RMON
to use when rcSysRmonEnable is TRUE.rw INTEGER .1.3.6.1.4.1.2272.1.1.22 |
rcSysRmonEnableControl whether the RMON feature should be
enabled.
To enable the RMON feature, set this variable to
true. The RMON agent in the device will get
started immediately if the amount of memory
specified by rcSysRmonMemSize is currently
available in the device.
To disable the RMON feature, set this variable to
false, save the new setting to NVRAM, and reboot
the device. After the device is rebooted the
RMON agent will not be operational.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.1.23 |
rcSysRmonTrapOptionUsed to indicate whether RMON traps should be
sent to only the owner of the RMON alarm (i.e.,
the manager that created the alarm entry) or
all trap recipients in the system trap receiver
table.rw Enumeration .1.3.6.1.4.1.2272.1.1.25 |
rcSysSupportRoutingUsed to indicate whether routing is supported
in this product.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.1.26 |
rcSysSupportWebServerUsed to indicate whether WebServer is supported
in this product.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.1.27 |
rcSysLastIpAddrChangeLast management initiated IP address change
since sysUpTime. Any addition or deletion of
an IP address to a single routable port or
a VLAN is time-stamped by this variable.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2272.1.1.28 |
rcSysAccessPolicyEnableUsed to configure the system access policy feature.
if 'true', the rcSysAccessPolicyTable is examined to
determine which packets should be allowed or denied
access to this device.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.1.31 |
rcSysDefaultRuntimeConfigFileNamedefault config.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2272.1.1.32 |
rcSysDefaultBootConfigFileNamedefault boot config.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2272.1.1.33 |
rcSysConfigFileNameFile name used in conjunction with rcSysAction.
If rcSysAction is set to 'saveRuntimeConfig' or
'saveRuntimeConfigToSlave' then this file name
will be used instead of the file name specified
in rcSysDefaultRuntimeConfigFileName.
If rcSysAction is set to 'saveBootConfig' or
'saveBootConfigToSlave' then this file name will
be used insteaad of the file name specified in
rcSysDefaultBootConfigFileName.
If the file name is blank (i.e., nothing is
entered) then the default file name will be
used.rw DisplayString .1.3.6.1.4.1.2272.1.1.34 |
rcSysLastRunTimeConfigSaveSysUpTime of the last time when the run time
configuration was written to.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2272.1.1.35 |
rcSysLastRunTimeConfigSaveToSlaveSysUpTime of the last time when the run time
configuration was written to slave NVRAM.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2272.1.1.36 |
rcSysLastBootConfigSaveSysUpTime of the last time when the boot
configuration was written to.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2272.1.1.37 |
rcSysLastBootConfigSaveOnSlaveSysUpTime of the last time when the boot
configuration was written on the slave NVRAM.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2272.1.1.38 |
rcSysRmonUtilizationMethodUsed to control whether RMON should use a half-duplex
or full-duplex formula to calculate port utilization.
When set to 'halfDuplex', RMON will use InOctets and
the port's speed to calculate port utilization (this
is the standard RMON rfc1271 convention).
When set to 'fullDuplex', RMON will use InOctets and
OutOctets and 2X the port's speed to calculate port
utilization. Furthermore, if this variable is set to
'fullDuplex', but the port is operating in a
half-duplex mode, the calculation defaults back to
the rfc1271 convention.rw Enumeration .1.3.6.1.4.1.2272.1.1.39 |
rcSysOtherBufferUtilbw currently consumedro Gauge32 .1.3.6.1.4.1.2272.1.1.41 |
rcSysOtherBufferUtilPeakpeak bw since resetro Gauge32 .1.3.6.1.4.1.2272.1.1.42 |
rcSysOtherBufferUtilPeakTimetimestamp for rcSysPeakBwro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2272.1.1.43 |
rcSysOtherCpuUtil% cpu utilizationro Gauge32 .1.3.6.1.4.1.2272.1.1.44 |
rcSysDramSizeDram size in mega-bytesro Integer32 .1.3.6.1.4.1.2272.1.1.46 |
rcSysDramUsedDram used in percentagero Gauge32 .1.3.6.1.4.1.2272.1.1.47 |
rcSysDramFreeDram free size in kilo-bytesro Integer32 .1.3.6.1.4.1.2272.1.1.48 |
rcSysDramMaxBlockFreeDram max block free size in kilo-bytesro Integer32 .1.3.6.1.4.1.2272.1.1.49 |
rcSysVirtualIpAddrVirtual IP is an IP address that owned and
advertised only by the master CPU. So whichever
CPU is master registers this IP address. Unlike the
management IP address, this address goes in the
switch config file and not the boot configrw IpAddress .1.3.6.1.4.1.2272.1.1.51 |
rcSysVirtualNetMaskNet mask of the management virtual Ip addressrw IpAddress .1.3.6.1.4.1.2272.1.1.52 |
rcSysReadWriteLevelThe status of the read/write levelrw Integer32 .1.3.6.1.4.1.2272.1.1.53 |
rcSysMTUSizeThis is the maximum transmission size of frames that all
the ports on the chassis support.rw Enumeration .1.3.6.1.4.1.2272.1.1.55 |
rcSysForceTrapSenderThis is a flag that if user wants to configured
CLIP (Circuit Less IP) as trap originator.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.1.57 |
rcSysMrouteStrLimitenable or disable mroute stream limit in system.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.1.58 |
rcSysAccessPolicyTableManagement access policy table. This table is
used to permit or deny access to this device via
the specified source Id. SEQUENCE OF RcSysAccesspolicyEntry .1.3.6.1.4.1.2272.1.1.61 |
rcSysAccessPolicyEntryAn access policy table entry. RcSysAccesspolicyEntry .1.3.6.1.4.1.2272.1.1.61.1 |
rcSysAccessPolicyIdPolicy Id.ro INTEGER .1.3.6.1.4.1.2272.1.1.61.1.1 |
rcSysAccessPolicyNameName of this policy.rw DisplayString .1.3.6.1.4.1.2272.1.1.61.1.2 |
rcSysAccessPolicyPolicyEnableIndicate whether this policy is currently
active.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.1.61.1.3 |
rcSysAccessPolicyModeUsed to indicate whether a packet having a
source IP address that matches this entry
should be permitted to enter the device or
denied access.rw Enumeration .1.3.6.1.4.1.2272.1.1.61.1.4 |
rcSysAccessPolicyServiceIs represented as bitset to indicate which protocol
this entry should be applied to.
Value is one of multiple(logical 'OR')
of the following values:
telnet(1),
snmp(2),
tftp(4),
ftp(8),
http(16),
rlogin(32),
ssh(64),
snmp-v3(128)
telnet(1): enables telnet service
snmp(2): enables snmp service
tftp(4): enables tftp service
ftp(8): enables ftp service
http(16): enables http service
rlogin(32): enables rlogin service
ssh(64): enables ssh service
snmp-v3(128): enables snmp service for v3 groups
Value 0 means no service enabled.rw INTEGER .1.3.6.1.4.1.2272.1.1.61.1.5 |
rcSysAccessPolicyPrecedenceUsed to indicate the precedence of this policy.
The Lower the number the higher the precedence.rw INTEGER .1.3.6.1.4.1.2272.1.1.61.1.6 |
rcSysAccessPolicyTrustedHostUserNameUser name on the trusted host performing a rlogin
into the device.rw DisplayString .1.3.6.1.4.1.2272.1.1.61.1.10 |
rcSysAccessPolicyAccessLevelAccess level of trusted host.rw Enumeration .1.3.6.1.4.1.2272.1.1.61.1.11 |
rcSysAccessPolicyLogUsed to indicate whether logging should be
performed if this policy was applied.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.1.61.1.12 |
rcSysAccessPolicyUsageUsage Counterro Counter32 .1.3.6.1.4.1.2272.1.1.61.1.13 |
rcSysAccessPolicyRowStatusUsed to create/delete an entryrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.1.61.1.14 |
rcSysAccessPolicyAccessStrictUsed to restrict the access level specified in
the system access policy table to exactly the
same access level as specified by user. If TRUE
then only the access level in the policy table
is allowed access. If FALSE, then the default
behavior is to assume the access level specified
in policy table as the floor.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.1.61.1.15 |
rcSysAccessPolicyNetInetAddrTypeSource network Inet Address Type.rw Enumeration .1.3.6.1.4.1.2272.1.1.61.1.16 |
rcSysAccessPolicyNetInetAddressSource network Inet Address (prefix/network).rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2272.1.1.61.1.17 |
rcSysAccessPolicyNetInetAddrPrefixLenSource network Inet Address Prefix-Length/Mask.rw InetAddressPrefixLength (INET-ADDRESS-MIB) .1.3.6.1.4.1.2272.1.1.61.1.18 |
rcSysAccessPolicyTrustedHostInetAddressTrusted Inet address of host performing a rlogin
into the device.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2272.1.1.61.1.19 |
rcSysTrapSenderTableThe trap sender table (0 to 25 entries). This
table lists the addresses of Network Management
Stations and the Source Address that should receive
trap messages from this entity when an exception
condition occurs. SEQUENCE OF RcSysTrapSenderEntry .1.3.6.1.4.1.2272.1.1.62 |
rcSysTrapSenderEntryA trap sender table entry. RcSysTrapSenderEntry .1.3.6.1.4.1.2272.1.1.62.1 |
rcSysTrapSenderRecvAddressIP address for trap receiver.ro IpAddress .1.3.6.1.4.1.2272.1.1.62.1.1 |
rcSysTrapSenderSrcAddressIP address for trap sender.rw IpAddress .1.3.6.1.4.1.2272.1.1.62.1.2 |
rcSysDnsServerListTableDNS serever list table used to store the
details of the DNS server configured. SEQUENCE OF RcSysDnsServerListEntry .1.3.6.1.4.1.2272.1.1.64 |
rcSysDnsServerListEntrytable entry. RcSysDnsServerListEntry .1.3.6.1.4.1.2272.1.1.64.1 |
rcSysDnsServerListTypeType of the DNS serverro Enumeration .1.3.6.1.4.1.2272.1.1.64.1.1 |
rcSysDnsServerListStatusStatus of DNS serverro Enumeration .1.3.6.1.4.1.2272.1.1.64.1.3 |
rcSysDnsServerListRequestCountNumber of request send to this serverro Counter32 .1.3.6.1.4.1.2272.1.1.64.1.4 |
rcSysDnsServerListSuccessCountNumber of request send to this server which
are successfulro Counter32 .1.3.6.1.4.1.2272.1.1.64.1.5 |
rcSysDnsServerListRowStatusUsed to create/delete DNS server entries
in rcSysDnsServerListTable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.1.64.1.6 |
rcSysDnsServerListAddressTypeThe address type of DNS Server.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2272.1.1.64.1.7 |
rcSysDnsServerListAddressThe address of the DNS Serverrw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2272.1.1.64.1.8 |
rcSysDnsHostTableDNS Host table. SEQUENCE OF RcSysDnsHostEntry .1.3.6.1.4.1.2272.1.1.65 |
rcSysDnsHostEntrytable entry. RcSysDnsHostEntry .1.3.6.1.4.1.2272.1.1.65.1 |
rcSysDnsHostDataHost Name or Host IP Address.ro OCTET STRING .1.3.6.1.4.1.2272.1.1.65.1.1 |
rcSysDnsHostNameHost Name.ro OCTET STRING .1.3.6.1.4.1.2272.1.1.65.1.2 |
rcSysDnsHostSourceDNS Server IP or /etc/host file.roobsolete OCTET STRING .1.3.6.1.4.1.2272.1.1.65.1.4 |
rcSysDnsHostAddressTypeAddress Type of the Host.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2272.1.1.65.1.5 |
rcSysDnsHostAddressAddress of the Host.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2272.1.1.65.1.6 |
rcSysMsgLogFrequencyUsed to specify the maximum frequency/count
of the occurence of the Log Message.ro INTEGER .1.3.6.1.4.1.2272.1.1.66 |
rcSysMsgLogTextA textual string containing the first four
characters of the Log Message.ro DisplayString .1.3.6.1.4.1.2272.1.1.67 |
rcSysForceIpHdrSenderFlag to decide if IP header source address will
be matched with SNMP header sender networks.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.1.68 |
rcSysDnsDomainNameDefault domain used for querying the DNS Server.rw DisplayString .1.3.6.1.4.1.2272.1.1.70 |
rcSysDnsServerListIpAddrDNS server's IP addressro IpAddress .1.3.6.1.4.1.2272.1.1.71 |
rcSysDnsRequestTypeDNS Type: Whether it was Dns Request or a Responsero Enumeration .1.3.6.1.4.1.2272.1.1.72 |
rcSysSpanningTreeOperModeThis object indicates the current spanning-tree mode
of the system.
The meaning of specific values is:
nortelStpg(1) .. The older proprietary mode which
supports multiple spanning tree groups.
pvst(2) ..Emulation of C***O spanning tree mode
rstp(3) ..IEEE 802.1w mode
mstp(4) ..IEEE 802.1s mode .ro Enumeration .1.3.6.1.4.1.2272.1.1.73 |
rcSysSpanningTreeAdminModeThis object indicates the desired spanning-tree mode
of the system.
The meaning of specific values is:
nortelStpg(1) .. The older proprietary mode which
supports multiple spanning tree groups.
pvst(2) ..Emulation of C***O spanning tree mode
rstp(3) ..IEEE 802.1w mode
mstp(4) ..IEEE 802.1s mode .
Note that depending on the current value of
rcSysSpanningTreeOperMode and the value to which this
object is set, the operational mode may be immediately
changed, or the change may not take effect until
the next system reboot.rw Enumeration .1.3.6.1.4.1.2272.1.1.74 |
rcSysAutoRecoverDelayTime interval in seconds after which auto-recovery
runs on ports to clear action taken by cp-limit,
link flap or loop detectrw INTEGER .1.3.6.1.4.1.2272.1.1.75 |
rcSysMacFlapLimitTimeTime limit in milliseconds for MAC flapping for
loop-detect featurerw INTEGER .1.3.6.1.4.1.2272.1.1.76 |
rcSysMacFlapLimitCountNumber of times mac flapping can happen for loop-detect
featurero Integer32 .1.3.6.1.4.1.2272.1.1.77 |
rcSysExtCplimitEnableenable or disable extended CP-LIMIT in system.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.1.78 |
rcSysExtCplimitMinCongTimeMinimum time for which System octapid should be
congested to trigger congestion algorithm for extended
CP-LIMIT in mSecsrw INTEGER .1.3.6.1.4.1.2272.1.1.79 |
rcSysExtCplimitMaxPortsMaximum number of ports which need to be monitored
for congestion in Extended CP-LIMITrw INTEGER .1.3.6.1.4.1.2272.1.1.80 |
rcSysExtCplimitPortCongTimeMinimum time for which ingress traffic utilization rate
of a monitored port should stay more than the allowed
limits in order to disable the port for extended
CP-LIMIT in Secsrw INTEGER .1.3.6.1.4.1.2272.1.1.81 |
rcSysExtCplimitTrapLevelIndicates the trap level for extended CP-LIMITrw Enumeration .1.3.6.1.4.1.2272.1.1.82 |
rcSysExtCplimitSysOctapidCongestedIndicates whether system octapid congestion detected for
extended cp-limitro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.1.83 |
rcSysExtCplimitPortsMonitoredIndicates whether ports has been shutdown due to extended
cp-limitro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.1.84 |
rcSysExtCplimitPortsShutDownIndicates whether ports has been shutdown due to
extended Cp-limitro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.1.85 |
rcSysActionL1Initiate a system action for layer1 userrw Enumeration .1.3.6.1.4.1.2272.1.1.86 |
rcSysActionL2Initiate a system action for layer2 userrw Enumeration .1.3.6.1.4.1.2272.1.1.87 |
rcSysActionL3Initiate a system action for layer3 userrw Enumeration .1.3.6.1.4.1.2272.1.1.88 |
rcSysActionRwaInitiate a system action.rw Enumeration .1.3.6.1.4.1.2272.1.1.89 |
rcSysPowerUsageThe current power usage for the whole chassis.ro Integer32 .1.3.6.1.4.1.2272.1.1.90 |
rcSysPowerAvailableThe current power available for the whole chassis.ro Integer32 .1.3.6.1.4.1.2272.1.1.91 |
rcSysFrcMsgControlTableManagement Force-msg Control table. This table is used to
specify the pattern for Force-msg Control SEQUENCE OF RcSysFrcMsgControlEntry .1.3.6.1.4.1.2272.1.1.94 |
rcSysFrcMsgControlEntryA Force-msg Control table entry. RcSysFrcMsgControlEntry .1.3.6.1.4.1.2272.1.1.94.1 |
rcSysFrcMsgControlPatternIdPattern Id. Integer32 .1.3.6.1.4.1.2272.1.1.94.1.1 |
rcSysFrcMsgControlPatternPattern for filtering the force-msg for msg controlrw DisplayString .1.3.6.1.4.1.2272.1.1.94.1.2 |
rcSysFrcMsgControlRowStatusUsed to create/delete an entryrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.1.94.1.3 |
rcSysAccPolSnmpGrpTableSNMP group list for access policy SEQUENCE OF RcSysAccPolSnmpGrpEntry .1.3.6.1.4.1.2272.1.1.95 |
rcSysAccPolSnmpGrpEntryThe table entry which covers the groups under snmp service. RcSysAccPolSnmpGrpEntry .1.3.6.1.4.1.2272.1.1.95.1 |
rcSysAccPolSnmpGrpNameThe snmp-v3 group name SnmpAdminString .1.3.6.1.4.1.2272.1.1.95.1.1 |
rcSysAccPolSnmpGrpModelThe snmp model SnmpSecurityModel (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.2272.1.1.95.1.2 |
rcSysAccPolSnmpGrpRowStatusRow statusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.1.95.1.3 |
rcSysVirtualIpv6AddrVirtual IP is an IP address that owned and
advertised only by the master CPU. So whichever
CPU is master registers this IP address.rw Ipv6Address (IPV6-TC) .1.3.6.1.4.1.2272.1.1.96 |
rcSysVirtualIpv6PrefixLengthThe length of the virtual ipv6 addr prefix (in bits).rw INTEGER .1.3.6.1.4.1.2272.1.1.97 |
rcSysLicenseTrialDaysLeftThis indicates days left before License Trial
Period will expire.ro Unsigned32 .1.3.6.1.4.1.2272.1.1.100 |
rcSysTotalPowerThe total power for the whole chassis.ro Integer32 .1.3.6.1.4.1.2272.1.1.116 |
rcSysRedundantPowerUsed to indicate the redundant power on the chassis.
The redundant power is per power supply unitro Integer32 .1.3.6.1.4.1.2272.1.1.117 |
rcSysAuthSuccessTrapEnableUsed to enable/disable the trap send for authenticaion
success trap rcnAuthenticationSuccess. It only allow
to be set when snmpEnableAuthenTraps is enabled.
I will be set to disable when snmpEnableAuthenTraps is
disabledrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.1.118 |
rcSysUdpSrcByVirtualIpEnableUsed to enable/disable virtual ip as udp source.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.1.119 |
rcTftp OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.2 |
rcTftpHostName of source/destination host for the TFTP
transfer.rw IpAddress .1.3.6.1.4.1.2272.1.2.1 |
rcTftpFileName of file for the TFTP transfer.rw DisplayString .1.3.6.1.4.1.2272.1.2.2 |
rcTftpActionThe action for the TFTP transfer.rw Enumeration .1.3.6.1.4.1.2272.1.2.3 |
rcTftpResultContains result of the last Tftp action request.ro Enumeration .1.3.6.1.4.1.2272.1.2.4 |
rcVlan OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.3 |
rcVlanNumVlansThe number of VLANs currently defined in the switch.ro INTEGER .1.3.6.1.4.1.2272.1.3.1 |
rcVlanTableA list of Virtual LAN entries. The number of entries
is given by rcVlanNumVlans. SEQUENCE OF RcVlanEntry .1.3.6.1.4.1.2272.1.3.2 |
rcVlanEntryEntry containing configuration information for a
particular Virtual LAN.
The relationship between the various port sets in a
VLAN Entry are :
o The set of ports defined by PortMembers must be a
subset of the set of ports in the underlying STG of
the VLAN.
o The bitwise AND of PortMembers and NotAllowToJoin must
be the empty set.
o The bitwise OR of PortMembers and NotAllowToJoin must
be the set of ports in the underlying STG of the VLAN.
o The set of ports defined by StaticMembers must be a
subset of the set of ports defined by PortMembers.
o The bitwise XOR of PortMembers and StaticMembers defines
the set of dynamic (potential) members of the VLAN.
o The set of ports defined by ActiveMembers must be a subset
of the set of ports defined by PortMembers. RcVlanEntry .1.3.6.1.4.1.2272.1.3.2.1 |
rcVlanIdA value that uniquely identifies the Virtual LAN
associated with this entry. This value corresponds
to the lower 12 bits in the IEEE 802.1Q VLAN Tag.ro RcVlanIdOrNone .1.3.6.1.4.1.2272.1.3.2.1.1 |
rcVlanNameAn administratively-assigned name for this VLAN.rw DisplayString .1.3.6.1.4.1.2272.1.3.2.1.2 |
rcVlanColorAn administratively-assigned color code for this
VLAN. The value of this object is used by the VLAN
Manager GUI tool to select a color when it draws
this VLAN on the screen.rw INTEGER .1.3.6.1.4.1.2272.1.3.2.1.3 |
rcVlanIfIndexWhen rcVlanRoutingEnable is set to true(1), this
value indicates the 'logical' ifIndex assigned to
this VLAN. Otherwise, this value is meaningless
and should be set to zero.ro InterfaceIndex .1.3.6.1.4.1.2272.1.3.2.1.6 |
rcVlanActionVLAN related actions.rw Enumeration .1.3.6.1.4.1.2272.1.3.2.1.7 |
rcVlanResultThe result from the last VLAN action.ro Enumeration .1.3.6.1.4.1.2272.1.3.2.1.8 |
rcVlanStgIdIndicates the Spanning Tree Group (STG) used by
this VLAN to determine the state of its ports.
If this VLAN is not associated with any STG, this
value should be set to zero.rw INTEGER .1.3.6.1.4.1.2272.1.3.2.1.9 |
rcVlanTypeThe type of VLAN, distinguished according to the
policy used to define its port membership.
VSP9000 does not support bySvlan(6) and ByIds(7).rw Enumeration .1.3.6.1.4.1.2272.1.3.2.1.10 |
rcVlanPortMembersThe set of ports that are members (static or
dynamic) of this VLAN.rw PortSet .1.3.6.1.4.1.2272.1.3.2.1.11 |
rcVlanActiveMembersThe set of ports that are currently active in
this VLAN. Active ports include all static ports
and any dynamic ports where the VLAN policy was
met.ro PortSet .1.3.6.1.4.1.2272.1.3.2.1.12 |
rcVlanStaticMembersThe set of ports that are static members of this
VLAN. A static member of a VLAN is always active
and is never aged out.rw PortSet .1.3.6.1.4.1.2272.1.3.2.1.13 |
rcVlanNotAllowToJoinThe set of ports that are not allowed to become
members of this VLAN.rw PortSet .1.3.6.1.4.1.2272.1.3.2.1.14 |
rcVlanProtocolIdThe protocol identifier of this VLAN. This value
is meaningful only if rcVlanType is equal to
byProtocolId(3). For other VLAN types it should
have the value none(0).rw Enumeration .1.3.6.1.4.1.2272.1.3.2.1.15 |
rcVlanSubnetAddrThe IP subnet address of this VLAN. This value
is meaningful only if rcVlanType is equal to
byIpSubnet(2). For other VLAN types it should
have the value 0.0.0.0.rw IpAddress .1.3.6.1.4.1.2272.1.3.2.1.16 |
rcVlanSubnetMaskThe IP subnet mask of this VLAN. This value
is meaningful only if rcVlanType is equal to
byIpSubnet(2). For other VLAN types it should
have the value 0.0.0.0.rw IpAddress .1.3.6.1.4.1.2272.1.3.2.1.17 |
rcVlanAgingTimeThe timeout period (in seconds) used for aging
out dynamic members of this VLAN. This field is
only relevant for policy-based VLANs.rw INTEGER (0 | 10..1000000) .1.3.6.1.4.1.2272.1.3.2.1.18 |
rcVlanMacAddressThe MAC address assigned to the virtual router
interface of this VLAN. This field is meaningful
only if rcVlanRoutingEnable is equal to true(1).ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2272.1.3.2.1.19 |
rcVlanRowStatusUsed to create/delete entries in the rcVlanTable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.3.2.1.20 |
rcVlanUserDefinedPidWhen rcVlanProtocolId is set to usrDefined(15)
in a protocol-based VLAN, this field represents
the 16-bit user defined protocol identifier.rw Integer32 .1.3.6.1.4.1.2272.1.3.2.1.26 |
rcVlanProtocolIdsBitfield of protocol ids.rw Integer32 .1.3.6.1.4.1.2272.1.3.2.1.28 |
rcVlanTosValueTos value.rw INTEGER .1.3.6.1.4.1.2272.1.3.2.1.34 |
rcVlanEncapThis is the encapsulation type for userdefined protocol
based vlans. This is not meaningful for other types of
vlan. The default value is null.rw Enumeration .1.3.6.1.4.1.2272.1.3.2.1.35 |
rcVlanFdbAgingThe timeout period (in seconds) used for aging
out fdb entries of this VLAN.rw INTEGER (0 | 10..1000000) .1.3.6.1.4.1.2272.1.3.2.1.37 |
rcVlanOspfPassivePortMemberThe set of ports in the vlan that are designated as
ospf passiverw PortSet .1.3.6.1.4.1.2272.1.3.2.1.44 |
rcVlanNlbModeNLB mode set on a VLAN.rw Enumeration .1.3.6.1.4.1.2272.1.3.2.1.46 |
rcVlanVrfIdIndicates the Virtual Router to which the VLAN belongsrw VrfIdentifier .1.3.6.1.4.1.2272.1.3.2.1.48 |
rcVlanVrfNameThe Name of the Virtual Router to which the VLAN belongsro DisplayString .1.3.6.1.4.1.2272.1.3.2.1.49 |
rcVlanNodalMepListList of nodal Meps assigned to this vlan. A mep
consists of Domain Name, Association name and Mep
Id separated by '.'. Each meps is separated by ',':
<md1>.<ma1>.<mepid1>,<md2>.<ma2>.<mepid2>,...
The maximum number of nodal Mep for each vlan is 8.rw DisplayString .1.3.6.1.4.1.2272.1.3.2.1.54 |
rcVlanNumOfNodalMepNumber of nodal meps assigned to this vlanro Integer32 .1.3.6.1.4.1.2272.1.3.2.1.55 |
rcVlanNodalMipLevelListList of nodal Mip levels assigned to this vlan that
allows Mip functionality to be enabled on a per level
per vlan basis. A mip level is represented by an
integer ranging from 0 to 7. The mip levels are
separated by ',': <0...7>,<0...7>,... The maximum
number of nodal Mip levels for each vlan is 8.rw DisplayString .1.3.6.1.4.1.2272.1.3.2.1.56 |
rcVlanNumOfNodalMipLevelNumber of nodal mip levels assigned to this vlan that
allows MIP functionality to be enabled on a per level
per vlan basis.ro Integer32 .1.3.6.1.4.1.2272.1.3.2.1.57 |
rcVlanPlsbIsidPlsb i-sid number assigned to a C-vlan. Default 0 value
indicates that no i-sid has been assinged.rw Integer32 .1.3.6.1.4.1.2272.1.3.2.1.61 |
rcVlanPortTableA table used to maintain VLAN port related
information. SEQUENCE OF RcVlanPortEntry .1.3.6.1.4.1.2272.1.3.3 |
rcVlanPortEntryEntry containing VLAN information regarding a
particular port. RcVlanPortEntry .1.3.6.1.4.1.2272.1.3.3.1 |
rcVlanPortIndexAn unique index used to identify a particular
port in the system. This index is equal to the
ifIndex of the port.ro Integer32 .1.3.6.1.4.1.2272.1.3.3.1.1 |
rcVlanPortNumVlanIdsUsed to indicate the number of VLAN IDs that
are stored in the rcVlanPortVlanIds variable.ro Integer32 .1.3.6.1.4.1.2272.1.3.3.1.2 |
rcVlanPortTypeThe type of port: access(1) or trunk(2).rw Enumeration .1.3.6.1.4.1.2272.1.3.3.1.4 |
rcVlanPortDiscardTaggedFramesA flag used to determine how to process tagged
frames received on this access port. When the
flag is set, these frames are discarded by the
forwarding process. When the flag is reset, these
frames are processed normally.
This field is meaningless when the port is not
an access port and should be set to false(2).rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.3.3.1.5 |
rcVlanPortDiscardUntaggedFramesA flag used to determine how to process untagged
frames received on this trunk port. When the flag
is set, these frames are discarded by the
forwarding process. When the flag is reset, these
frames are assigned to the VLAN specified by
rcVlanPortDefaultVlanId.
This field is meaningless when the port is not
a trunk port and should be set to false(2).rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.3.3.1.6 |
rcVlanPortDefaultVlanIdThe VLAN ID assigned to untagged frames received
on this trunk port.
This field is meaningless when the port is not
a trunk port.rw INTEGER .1.3.6.1.4.1.2272.1.3.3.1.7 |
rcVlanPortPerformTaggingEnable/disable the port on the current vlan to
perform tagging on the incoming and outgoing traffic.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.3.3.1.8 |
rcVlanPortLoopDetectEnable/disable loop detection on this portrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.3.3.1.10 |
rcVlanPortFirstPortInOpidThis value gives the IfIndex of the first port in the
octapid. This value is used to generate an error message
when changing port type from normal to uni/nni and
viceversaro InterfaceIndex .1.3.6.1.4.1.2272.1.3.3.1.11 |
rcVlanPortLastPortInOpidThis value gives the IfIndex of the first port in the
octapid. This value is used to generate an error message
when changing port type from normal to uni/nni and
viceversaro InterfaceIndex .1.3.6.1.4.1.2272.1.3.3.1.12 |
rcVlanPortUntagDefaultVlanenable/disable Egress Tagging on the Default Vlan of the
port.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.3.3.1.13 |
rcVlanPortLoopDetectActionThis value is used to specify the action which needs
to be taken once a loop is detected on a specific port.
VlanBlock is not supported in VSP9000.rw Enumeration .1.3.6.1.4.1.2272.1.3.3.1.14 |
rcVlanPortArpDetectEnable/disable Arp detection on this portrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.3.3.1.15 |
rcVlanPortSpoofDetectEnable/disable spoof detection on this portrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.3.3.1.16 |
rcVlanPortClassificationSubnetEnable/disable Subnet based Vlan packets on this port.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.3.3.1.18 |
rcVlanPortClassificationProtocolEnable/disable Protocol based Vlan packets on this port.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.3.3.1.19 |
rcVlanPortClassificationPrecSets the precedence for vlan classification. A value
of 1 puts classification of packets to source mac vlans
ahead of subnet based vlans. A value of 2 puts subnet
based vlans ahead of source mac vlans. Classification
to other types of vlans is unaffected as it occurs
following source mac and subnet based vlans.rw Enumeration .1.3.6.1.4.1.2272.1.3.3.1.20 |
rcVlanPortVlanIdListThis bitfield is used to identify which VLANs this port
is assigned to. Each VLAN ID is stored as a bit.
The most-significant (left-most) bit represents Vlan Id 1.rw OCTET STRING .1.3.6.1.4.1.2272.1.3.3.1.21 |
rcVlanPortClassificationSourceMacEnable/disable SourceMac based Vlan packets on this port.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.3.3.1.22 |
rcVlanMacTableA table used to maintain MAC addresses assigned
to a particular VLAN by MAC address. SEQUENCE OF RcVlanMacEntry .1.3.6.1.4.1.2272.1.3.4 |
rcVlanMacEntryEntry containing VLAN information regarding a
particular port. RcVlanMacEntry .1.3.6.1.4.1.2272.1.3.4.1 |
rcVlanMacVlanIdAn unique index used to identify a VLAN (by MAC
address) in the system.ro Integer32 .1.3.6.1.4.1.2272.1.3.4.1.1 |
rcVlanMacAddrAn unique index used to identify a MAC address
assigned to a particular VLAN.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2272.1.3.4.1.2 |
rcVlanMacRowStatusRow status for this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.3.4.1.3 |
rcVlanIgmpSnoopNumGroupsThe number of entries (rows) in the
rcVlanIgmpSnoopTable.ro Integer32 .1.3.6.1.4.1.2272.1.3.5 |
rcVlanLoopDetectedTableA list of Vlans the port belongs to
and the
corresponding loop detected status. SEQUENCE OF RcVlanLoopDetectedEntry .1.3.6.1.4.1.2272.1.3.10 |
rcVlanLoopDetectedEntryLoop-Detected Entry. RcVlanLoopDetectedEntry .1.3.6.1.4.1.2272.1.3.10.1 |
rcVlanLoopDetectedPortIndexPort Number.ro Integer32 .1.3.6.1.4.1.2272.1.3.10.1.1 |
rcVlanLoopDetectedVlanIdGives the VlanId to which the port belongs.ro Integer32 .1.3.6.1.4.1.2272.1.3.10.1.2 |
rcVlanLoopDetectedValueGives the Loop Detected status of the port
in a vlan.ro Enumeration .1.3.6.1.4.1.2272.1.3.10.1.3 |
rcVlanDsapSsapTableA table used to maintain DSAP/SSAP values
assigned to a sna802dot2 or userdefined vlan. SEQUENCE OF RcVlanDsapSsapEntry .1.3.6.1.4.1.2272.1.3.11 |
rcVlanDsapSsapEntryAn entry in the rcVlanDsapSsap table. RcVlanDsapSsapEntry .1.3.6.1.4.1.2272.1.3.11.1 |
rcVlanDsapSsapVlanIdA unique index to identify a vlan. Integer32 .1.3.6.1.4.1.2272.1.3.11.1.1 |
rcVlanDsapSsapPidValues of DSAP/SSAP assigned to a particular
vlan. INTEGER (0..'ffff'h) .1.3.6.1.4.1.2272.1.3.11.1.2 |
rcVlanDsapSsapRowStatusRow Status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.3.11.1.3 |
rcVlanNewLoopDetectedTableA list of Vlans the port belongs to and the
corresponding loop detected status. SEQUENCE OF RcVlanNewLoopDetectedEntry .1.3.6.1.4.1.2272.1.3.12 |
rcVlanNewLoopDetectedEntryLoop-Detected Entry. RcVlanNewLoopDetectedEntry .1.3.6.1.4.1.2272.1.3.12.1 |
rcVlanNewLoopDetectedPortIndexPort Number. InterfaceIndex .1.3.6.1.4.1.2272.1.3.12.1.1 |
rcVlanNewLoopDetectedVlanIdGives the VlanId to which the port belongs. Integer32 .1.3.6.1.4.1.2272.1.3.12.1.2 |
rcVlanNewLoopDetectedMacMac address MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2272.1.3.12.1.3 |
rcVlanNewLoopDetectedActionThis value is used to specify the action which
needs to be taken once a loop is detected on a
specific port.ro Enumeration .1.3.6.1.4.1.2272.1.3.12.1.4 |
rcVlanNewLoopDetectedSmltRemoteA MAC address indicate for remote learnt,
either local or remote.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.3.12.1.5 |
rcChassis OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.4 |
rcChasTypeChassis Typero Enumeration .1.3.6.1.4.1.2272.1.4.1 |
rcChasSerialNumberUnique serial number for this chassis.ro DisplayString .1.3.6.1.4.1.2272.1.4.2 |
rcChasHardwareRevisionDevice hardware revision levelro DisplayString .1.3.6.1.4.1.2272.1.4.3 |
rcChasNumSlotsThe number of slots in the chassis available for
plug-in cards.ro INTEGER .1.3.6.1.4.1.2272.1.4.4 |
rcChasNumPortsThe total number of ports currently installed in
the chassis.ro INTEGER .1.3.6.1.4.1.2272.1.4.5 |
rcChasFan OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.4.7 |
rcChasFanZoneTableTable for the zones available on the chassis SEQUENCE OF RcChasFanZoneEntry .1.3.6.1.4.1.2272.1.4.7.2 |
rcChasFanZoneEntryContains information regarding a zone unit RcChasFanZoneEntry .1.3.6.1.4.1.2272.1.4.7.2.1 |
rcChasFanZoneTypeType of the fan zone. Enumeration .1.3.6.1.4.1.2272.1.4.7.2.1.1 |
rcChasFanZoneModeFunctional mode of the fan zone.ro Enumeration .1.3.6.1.4.1.2272.1.4.7.2.1.2 |
rcChasFanZoneModeStatusBit set indicates the alarm type(s)ro Bits .1.3.6.1.4.1.2272.1.4.7.2.1.3 |
rcChasFanZoneAlarmTimerAlarm timer indicates the remaining time before
system checks and shutdown module when fan is in
the alarm state. Zero means the fan i snot in an
alarm statero Integer32 UNITS "seconds" .1.3.6.1.4.1.2272.1.4.7.2.1.4 |
rcChasFanZoneTemperatureHighest temperature measured in celsius degree
from all the sensors (inlet and outlet) in the zonero Gauge32 .1.3.6.1.4.1.2272.1.4.7.2.1.5 |
rcChasFanZoneTray1LedColorLed color indicate fans operation status on tray
off: Indicates no tray or power off.
green: Indicates all fans are operational in a tray.
red: Front Zone Tray: more than one fans in a tray are not opertional.
Rear Zone Tray: one of two or both fans fans in a tray are not operational.
amber: Front Zone Tray: one of eight fans is not operational.
Rear Zone Tray: It is not applicable for Rear Zone trayro Enumeration .1.3.6.1.4.1.2272.1.4.7.2.1.6 |
rcChasFanZoneTray2LedColorLed color indicate fans operation status on tray
off: Indicates no tray or power off.
green: Indicates all fans are operational in a tray.
red: Front Zone Tray: more than one fans in a tray are not opertional.
Rear Zone Tray: one of two fans or both fans in a tray are not operational.
amber: Front Zone Tray: one of eight fans is not operational.
Rear Zone Tray: It is not applicable for Rear Zone trayro Enumeration .1.3.6.1.4.1.2272.1.4.7.2.1.7 |
rcChasFanInfoTableThis table contains information for
all the fans on the chassis SEQUENCE OF RcChasFanInfoEntry .1.3.6.1.4.1.2272.1.4.7.3 |
rcChasFanInfoEntryContains information regarding a fan unit RcChasFanInfoEntry .1.3.6.1.4.1.2272.1.4.7.3.1 |
rcChasFanInfoTrayNumber of trays per zone in chassis INTEGER .1.3.6.1.4.1.2272.1.4.7.3.1.1 |
rcChasFanInfoFanNumber of fans per tray INTEGER .1.3.6.1.4.1.2272.1.4.7.3.1.2 |
rcChasFanInfoExpectedSpeedThe administrative setting for the fan speed
low: Low speed set by software
medium: Medium speed set by software
high: High speed set by software
hardware: Speed controlled by hardwarero Enumeration .1.3.6.1.4.1.2272.1.4.7.3.1.3 |
rcChasFanInfoOperSpeedActual speed of the fanro Enumeration .1.3.6.1.4.1.2272.1.4.7.3.1.4 |
rcChasFanInfoStatusThe operational status of the fan. Details below:
ok(1): Fan operating under normal condition(s)
faulty(2): Fan not operating as expectedro Enumeration .1.3.6.1.4.1.2272.1.4.7.3.1.5 |
rcChasPowerSupply OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.4.8 |
rcChasPowerSupplyTableThis table contains information about power
supplies. SEQUENCE OF RcChasPowerSupplyEntry .1.3.6.1.4.1.2272.1.4.8.1 |
rcChasPowerSupplyEntryContains information regarding a power supply
unit. RcChasPowerSupplyEntry .1.3.6.1.4.1.2272.1.4.8.1.1 |
rcChasPowerSupplyIdThe power supply Id.ro INTEGER .1.3.6.1.4.1.2272.1.4.8.1.1.1 |
rcChasPowerSupplyOperStatusActual status of the power supply:
- unknown(1) - status can not be determined.
- empty(2) - power supply not installed.
- up(3) - present and supplying power.
- down(4) - present, but failure indicated.ro Enumeration .1.3.6.1.4.1.2272.1.4.8.1.1.2 |
rcChasPowerSupplyDetailTableThis table contains detailed information about
power supplies. SEQUENCE OF RcChasPowerSupplyDetailEntry .1.3.6.1.4.1.2272.1.4.8.2 |
rcChasPowerSupplyDetailEntryContains detailed info regarding a power supply
unit. RcChasPowerSupplyDetailEntry .1.3.6.1.4.1.2272.1.4.8.2.1 |
rcChasPowerSupplyDetailIdThe power supply Id.ro INTEGER .1.3.6.1.4.1.2272.1.4.8.2.1.1 |
rcChasPowerSupplyDetailTypeThe power supply type.ro Enumeration .1.3.6.1.4.1.2272.1.4.8.2.1.2 |
rcChasPowerSupplyDetailSerialNumberThe power supply serial number.ro DisplayString .1.3.6.1.4.1.2272.1.4.8.2.1.3 |
rcChasPowerSupplyDetailHardwareRevisionThe hardware revision of the power supply.ro DisplayString .1.3.6.1.4.1.2272.1.4.8.2.1.4 |
rcChasPowerSupplyDetailPartNumberThe power supply part number.ro DisplayString .1.3.6.1.4.1.2272.1.4.8.2.1.5 |
rcChasPowerSupplyDetailDescriptionThe detail description of power supply.ro DisplayString .1.3.6.1.4.1.2272.1.4.8.2.1.6 |
rcChasPowerSupplyDetailInputLineVoltageThe power supply Input Line voltage.ro Enumeration .1.3.6.1.4.1.2272.1.4.8.2.1.8 |
rcChasPowerSupplyDetailOutputWattsThe output power of this power supplyro Integer32 .1.3.6.1.4.1.2272.1.4.8.2.1.10 |
rcCard OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.4.9 |
rcCardTableA table that contains information about the
cards in this chassis. For those slots that
do not contain a physical card, the table may
be implemented to contain a conceptual row
with the type of physical module set to
'chasCardEmpty', or it may be implemented to
have no conceptual row instance. SEQUENCE OF RcCardEntry .1.3.6.1.4.1.2272.1.4.9.1 |
rcCardEntryCard attributes RcCardEntry .1.3.6.1.4.1.2272.1.4.9.1.1 |
rcCardIndexA unique value for each module within the chassis.
This value is determined by the chassis slot number
where the module is inserted. Valid entries are 1
to the value of rcChasNumSlotsro INTEGER .1.3.6.1.4.1.2272.1.4.9.1.1.1 |
rcCardTypeUsed to indicate the card type. The value returned
is defined by the description in rc2kCardTable.ro Enumeration .1.3.6.1.4.1.2272.1.4.9.1.1.2 |
rcCardOxateCpldOxate CPLD version for CP cardro DisplayString .1.3.6.1.4.1.2272.1.4.9.1.1.9 |
rcCardOxideFpgaOxide FGPA version for CP cardro DisplayString .1.3.6.1.4.1.2272.1.4.9.1.1.10 |
rcCardCatskillFpgaCatskill FPGA version for CP cardro DisplayString .1.3.6.1.4.1.2272.1.4.9.1.1.11 |
rcCardQEQE version for CP cardro DisplayString .1.3.6.1.4.1.2272.1.4.9.1.1.12 |
rcCardK2FpgaK2 FPGA version for IO cardro DisplayString .1.3.6.1.4.1.2272.1.4.9.1.1.13 |
rcCardIoDateDCIO Date DC CPLD for IO cardro DisplayString .1.3.6.1.4.1.2272.1.4.9.1.1.14 |
rcCardIoDateBBIO Date BaseBoard CPLD for IO cardro DisplayString .1.3.6.1.4.1.2272.1.4.9.1.1.15 |
rcCardIoPimCpldIO PIM CPLD for IO cardro DisplayString .1.3.6.1.4.1.2272.1.4.9.1.1.16 |
rcCardLed0CpldLED0 CPLD for IO cardro DisplayString .1.3.6.1.4.1.2272.1.4.9.1.1.17 |
rcCardLed1CpldLED1 CPLD for IO cardro DisplayString .1.3.6.1.4.1.2272.1.4.9.1.1.18 |
rcCardZagrosFpgaZagros FPGA for IO cardro DisplayString .1.3.6.1.4.1.2272.1.4.9.1.1.19 |
rcCardRspRSP for IO cardro DisplayString .1.3.6.1.4.1.2272.1.4.9.1.1.20 |
rcCardBcmMacBCM Mac for IO cardro DisplayString .1.3.6.1.4.1.2272.1.4.9.1.1.21 |
rcCardPhosphideFpgaPhosphide FPGA for IO cardro DisplayString .1.3.6.1.4.1.2272.1.4.9.1.1.22 |
rcCardSulfideFpgaSulfide FPGA for IO cardro DisplayString .1.3.6.1.4.1.2272.1.4.9.1.1.23 |
rcCardFluorateCpldFluorate Cpld for SF cardro DisplayString .1.3.6.1.4.1.2272.1.4.9.1.1.24 |
rcCardBmeBME for SF cardro DisplayString .1.3.6.1.4.1.2272.1.4.9.1.1.25 |
rcPort OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.4.10 |
rcPortTablePort table SEQUENCE OF RcPortEntry .1.3.6.1.4.1.2272.1.4.10.1 |
rcPortEntryEntry containing info. for a particular port RcPortEntry .1.3.6.1.4.1.2272.1.4.10.1.1 |
rcPortIndexAn index value that uniquely identifies a port.
This value is similar to ifIndex in MIB2.ro InterfaceIndex .1.3.6.1.4.1.2272.1.4.10.1.1.1 |
rcPortTypePort typero Enumeration .1.3.6.1.4.1.2272.1.4.10.1.1.2 |
rcPortActionPort related actions.rw Enumeration .1.3.6.1.4.1.2272.1.4.10.1.1.6 |
rcPortResultResult from the last Vlan action.ro Enumeration .1.3.6.1.4.1.2272.1.4.10.1.1.7 |
rcPortAutoNegotiateIndicate whether this port enabled for auto
negotiations or not.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.4.10.1.1.11 |
rcPortAdminDuplexIndicates the port duplex typerw Enumeration .1.3.6.1.4.1.2272.1.4.10.1.1.12 |
rcPortOperDuplexIndicate this port's current duplex value.ro Enumeration .1.3.6.1.4.1.2272.1.4.10.1.1.13 |
rcPortAdminSpeedIndicate this port's speed.rw Enumeration .1.3.6.1.4.1.2272.1.4.10.1.1.14 |
rcPortOperSpeedIndicate this port's current speed value.ro Integer32 .1.3.6.1.4.1.2272.1.4.10.1.1.15 |
rcPortMltIdIndicate which multi-link trunk (MLT) this port
is assigned to. If this port is not associated
with any MLT, this value will be set to zero(0).ro Integer32 .1.3.6.1.4.1.2272.1.4.10.1.1.16 |
rcPortLockedIndicate whether this port is locked.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.4.10.1.1.17 |
rcPortAutoNegotiationSupportedIndicate whether this port can support
auto-negotiation.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.4.10.1.1.18 |
rcPortSingleRoutablePortIndicate whether this port is a single routable
port. If this value is true, the port functions
like a traditional router port.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.4.10.1.1.19 |
rcPortUnknownMacDiscardIf rcUnknownMacDiscard is set to True,
then a packet with an unknown source MAC address
is dropped on that port, and other ports then
will discard any packets with this MAC address
in the destination field.
For example,
suppose 11:22:33:44:55:66 is an unknown source MAC,
packets with source MAC 11:22:33:44:55 coming from
this port is discarded, further more, packets with
destination MAC 11:22:33:44:55:66 coming from
other ports are also discarded, unless this address
is later learned on another port or the restriction
ages out.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.4.10.1.1.20 |
rcPortNumStateTransition# state transitions.ro Counter32 .1.3.6.1.4.1.2272.1.4.10.1.1.21 |
rcPortQosLevelUsed to specify the Qos level packets, carried on this
port, should be processed with.rw Enumeration .1.3.6.1.4.1.2272.1.4.10.1.1.30 |
rcPortDiffServEnableUsed to enable/disable the Differentiated Service
feature on this port.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.4.10.1.1.31 |
rcPortDiffServTypeUsed to specify the Differentiated Service type
for this port.rw Enumeration .1.3.6.1.4.1.2272.1.4.10.1.1.32 |
rcPortVendorDescrUsed to show the name of the vendor of this port's
connector. Only applicable to ports on a GBIC cards.ro DisplayString .1.3.6.1.4.1.2272.1.4.10.1.1.34 |
rcPortNameThis port's name.rw DisplayString .1.3.6.1.4.1.2272.1.4.10.1.1.35 |
rcPortAdminRoutingIndicate whether the port is routable.rw EnableValue .1.3.6.1.4.1.2272.1.4.10.1.1.43 |
rcPortOperRoutingThe status of the port whether is routable.ro EnableValue .1.3.6.1.4.1.2272.1.4.10.1.1.44 |
rcPortIeee8021POverrideEnableUsed to enable/disable IEEE 802.1P override.
If it is enabled, 802.1p value from a tagged
frame may not be honored.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.4.10.1.1.46 |
rcPortHighSecureEnableEnable/Disable high secure feature.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.4.10.1.1.51 |
rcPortMrouteStrLimitmaximum number of multicast streams that are
allowed to ingress to CPU through this port.rw INTEGER .1.3.6.1.4.1.2272.1.4.10.1.1.55 |
rcPortMrouteStrTimerChecksampling period to check number of multicast
streams that has ingressed CPU through this
port in seconds.rw INTEGER .1.3.6.1.4.1.2272.1.4.10.1.1.56 |
rcPortMrouteStrLimitEnableenable or disable mroute stream limit on port.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.4.10.1.1.57 |
rcPortAutoNegAdThis object is used to specify the port speed
and duplex abilities to be advertised during
link negotiation.
bit 0 - 10 half duplex advertised
bit 1 - 10 full duplex advertised
bit 2 - 100 half duplex advertised
bit 3 - 100 full duplex advertised
bit 5 - 1000 full duplex advertised
bit 6 - Mac PAUSE frame support advertised
bit 7 - Asymmetric PAUSE frame support advertised
bit 8 - No advertisements
The abilities specified in this object are only used
when auto-negotiation is enabled on the port. If all
bits in this object are disabled, and auto-negotiation
is enabled on the port, then the physical link process
on the port will be disabled (if hardware supports
this ability).
Any change in the value of this bit map will force the
PHY to restart the auto-negotiation process. This will
have the same effect as physically unplugging and
reattaching the cable plant attached to this port.
The capabilities being advertised are either all the
capabilities supported by the hardware or the user-
configured capabilities which is a subset of all the
capability supported by hardware.
The default value for this object will be all the
capabilities supported by the hardware.
Note that bit 6 and bit 7 are currently not supported
in ERS8600.rw Bits .1.3.6.1.4.1.2272.1.4.10.1.1.62 |
rcPortAutoRecoverPortenable or disable auto recovery of port from action
taken by cp-limit, link flap or loop detect featuresrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.4.10.1.1.64 |
rcPortEgressRateLimitEgress Rate Limit. for VSP 9000, range is
10000 to 10000000rw INTEGER(0|10000..10000000) .1.3.6.1.4.1.2272.1.4.10.1.1.67 |
rcPortEgressRateLimitStateUsed to enable/disable shape/egress-rate-limit
functionality.rw EnableValue .1.3.6.1.4.1.2272.1.4.10.1.1.68 |
rcPortIngressRateLimitLimits the amount of traffic from this Ingress port.rw INTEGER .1.3.6.1.4.1.2272.1.4.10.1.1.85 |
rcPortVrfIdListThe set of VRF ids to which this port belongs.ro IdList .1.3.6.1.4.1.2272.1.4.10.1.1.87 |
rcPortVrfNameListThe set of VRF names to which this port belongs.ro OCTET STRING .1.3.6.1.4.1.2272.1.4.10.1.1.96 |
rcPortBrouterVrfIdGives the VRF Id for this Brouter port.rw VrfIdentifier .1.3.6.1.4.1.2272.1.4.10.1.1.97 |
rcPortBrouterVrfNameGives the VRF Name for this Brouter port.ro DisplayString .1.3.6.1.4.1.2272.1.4.10.1.1.98 |
rcPortVrfCountThe total number of VRFs this port is associated to.ro Counter32 .1.3.6.1.4.1.2272.1.4.10.1.1.99 |
rcPortIngressRatePeakPeak rate limit for this port. 0 means disablerw INTEGER(0 | 64..10000000) .1.3.6.1.4.1.2272.1.4.10.1.1.108 |
rcPortIngressRateSvcService rate limit for this port. 0 mean deisablerw INTEGER(0 | 64..10000000) .1.3.6.1.4.1.2272.1.4.10.1.1.109 |
rcPortCpLimitPktRateUsed to limit Control packets on the
port to qos-levels 6 and 7.
Sets the limit in packets per second.rw INTEGER .1.3.6.1.4.1.2272.1.4.10.1.1.110 |
rcPortCpLimitShutDownEnableUsed to indicate if the port should be shutdown
when the CpLimitPktRate is exceeded.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.4.10.1.1.111 |
rcPortPcapTablePort pcap Table SEQUENCE OF RcPortPcapEntry .1.3.6.1.4.1.2272.1.4.10.2 |
rcPortPcapEntryEntry containing pcap info. for a particular port RcPortPcapEntry .1.3.6.1.4.1.2272.1.4.10.2.1 |
rcPortPcapIndexAn index value that uniquely identifies a port.
This value is similar to ifIndex in MIB2.ro InterfaceIndex .1.3.6.1.4.1.2272.1.4.10.2.1.1 |
rcPortPcapEnableTo enable pcap for the portrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.4.10.2.1.2 |
rcPortPcapModeMode in which pcap is enabledrw Enumeration .1.3.6.1.4.1.2272.1.4.10.2.1.3 |
rcPortLacpTablePort LACP table SEQUENCE OF RcPortLacpEntry .1.3.6.1.4.1.2272.1.4.10.4 |
rcPortLacpEntryEntry containing info. for a particular port RcPortLacpEntry .1.3.6.1.4.1.2272.1.4.10.4.1 |
rcPortLacpAdminEnableAdministratively enable/disable LACP on a portrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.4.10.4.1.1 |
rcPortLacpOperEnableIndicates if LACP is operationally enabled or disabled
on a portro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.4.10.4.1.2 |
rcPortLacpFastPeriodicTimeThe number of miliseconds between periodic transmissions
using Short Timeouts.rw INTEGER .1.3.6.1.4.1.2272.1.4.10.4.1.3 |
rcPortLacpSlowPeriodicTimeThe number of miliseconds between periodic transmissions
using LONG Timeouts.rw INTEGER .1.3.6.1.4.1.2272.1.4.10.4.1.4 |
rcPortLacpTimeoutScaleScalar value used to calculate timeout time from
periodic time. Timeout = PeriodicTime * TimeoutScalerw INTEGER .1.3.6.1.4.1.2272.1.4.10.4.1.5 |
rcPortLacpAggrWaitTimeThe number of mili seconds to delay aggregation to
allow multiple links to aggregate simultaneously.rw INTEGER .1.3.6.1.4.1.2272.1.4.10.4.1.6 |
rcPortLacpFastPeriodicTimeOperThe operating value of fast periodic timer on the port.ro INTEGER .1.3.6.1.4.1.2272.1.4.10.4.1.7 |
rcPortLacpSlowPeriodicTimeOperThe operating value of slow periodic timer on the port.ro INTEGER .1.3.6.1.4.1.2272.1.4.10.4.1.8 |
rcPortLacpTimeoutScaleOperThe operating value of timeout scale on the port.ro INTEGER .1.3.6.1.4.1.2272.1.4.10.4.1.9 |
rcPortLacpAggrWaitTimeOperThe operating value of aggreagate wait time on port.ro INTEGER .1.3.6.1.4.1.2272.1.4.10.4.1.10 |
rcPortVLacpTablePort Virtual LACP table SEQUENCE OF RcPortVLacpEntry .1.3.6.1.4.1.2272.1.4.10.5 |
rcPortVLacpEntryEntry containing info. for a particular port RcPortVLacpEntry .1.3.6.1.4.1.2272.1.4.10.5.1 |
rcPortVLacpAdminEnableAdministratively enable/disable Virtual LACP on a portrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.4.10.5.1.1 |
rcPortVLacpOperEnableIndicates if Virtual LACP is operationally enabled or
disabled on a portro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.4.10.5.1.2 |
rcPortVLacpFastPeriodicTimerThe number of miliseconds between periodic transmissions
using Short Timeoutsrw INTEGER .1.3.6.1.4.1.2272.1.4.10.5.1.3 |
rcPortVLacpSlowPeriodicTimerThe number of miliseconds between periodic transmissions
using LONG Timeouts.rw INTEGER .1.3.6.1.4.1.2272.1.4.10.5.1.4 |
rcPortVLacpTimeoutTimeout control value. Long or Short Timeoutrw Enumeration .1.3.6.1.4.1.2272.1.4.10.5.1.5 |
rcPortVLacpTimeoutScaleScalar value used to calculate timeout time from
periodic time. Timeout = PeriodicTime * TimeoutScalerw INTEGER .1.3.6.1.4.1.2272.1.4.10.5.1.6 |
rcPortVLacpEtherTypeVLACP Protocol Identification. The id value is
in Hex. Range in hex (0x600..0xffff)rw Integer32 .1.3.6.1.4.1.2272.1.4.10.5.1.7 |
rcPortVLacpEtherMacAddressMulticast Mac Address exclusively used for VLACPDU'srw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2272.1.4.10.5.1.8 |
rcPortVLacpPortStateDisplay the Vlacp Port State.ro Enumeration .1.3.6.1.4.1.2272.1.4.10.5.1.9 |
rcPortRemoteMirroringTablePort Remote Mirroring Table SEQUENCE OF RcPortRemoteMirroringEntry .1.3.6.1.4.1.2272.1.4.10.6 |
rcPortRemoteMirroringEntryEntry containing remote mirroring info. for a
particular port RcPortRemoteMirroringEntry .1.3.6.1.4.1.2272.1.4.10.6.1 |
rcPortRemoteMirroringIndexAn index value that uniquely identifies a port.
This value is similar to ifIndex in MIB2.ro InterfaceIndex .1.3.6.1.4.1.2272.1.4.10.6.1.1 |
rcPortRemoteMirroringEnableTo enable remote Mirroring for the portrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.4.10.6.1.2 |
rcPortRemoteMirroringModeMode in which remote mirroring is enabledrw Enumeration .1.3.6.1.4.1.2272.1.4.10.6.1.3 |
rcPortRemoteMirroringSrcMacSource Mac of the remote mirrored packet.
Remote mirroring packet will be send with
this source mac addressrw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2272.1.4.10.6.1.4 |
rcPortRemoteMirroringDstMacDestination Mac of the remote mirrored packet.
Packets will be bridged to this mac address.
Remote mirroring packet will be send to this
mac addressrw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2272.1.4.10.6.1.5 |
rcPortRemoteMirroringEtherTypeEthertype of the remote mirrored packet. Packets
will be send with this ethertyperw INTEGER .1.3.6.1.4.1.2272.1.4.10.6.1.6 |
rcPortRemoteMirroringVlanIdListSizeUsed to indicate the number of VLAN IDs
that are assigned to this port.ro INTEGER .1.3.6.1.4.1.2272.1.4.10.6.1.7 |
rcPortRemoteMirroringVlanIdListThis field is used only if the port is assigned as
remote mirroring termination port. Represents zero
or more filter lists vlan in which the Destination
Mac address resides. Each VLAN ID is stored as
two bytes in this array starting from offset zero.
Any unused bytes should be set to zero.rw OCTET STRING .1.3.6.1.4.1.2272.1.4.10.6.1.8 |
rcPortRemoteMirroringRowStatusRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.4.10.6.1.9 |
rcPortLosslessEnetTablePort Lossless Ethernet Table SEQUENCE OF RcPortLosslessEnetEntry .1.3.6.1.4.1.2272.1.4.10.13 |
rcPortLosslessEnetEntryEntry containing lossless Ethernet information
for a particular port. RcPortLosslessEnetEntry .1.3.6.1.4.1.2272.1.4.10.13.1 |
rcPortLosslessEnetIndexAn index value that uniquely identifies a port.
This value is similar to ifIndex in MIB2.
Lossless Ethernet will be limited to 10Gig
ports. InterfaceIndex .1.3.6.1.4.1.2272.1.4.10.13.1.1 |
rcPortLosslessEnetConfiguredTo enable lossless mode for the portrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.4.10.13.1.2 |
rcPortLosslessEnetPauseTypePause frame type. fc - Pause,
pfc - priority-based flow control.rw Enumeration .1.3.6.1.4.1.2272.1.4.10.13.1.3 |
rcPortLosslessEnetPfcBandwidthGuaranteed bandwidth in Gbps when
rcPortLosslessEnetPauseType is set to pfc(2).rw Integer32 .1.3.6.1.4.1.2272.1.4.10.13.1.4 |
rcPortLock OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.4.11 |
rcPortLockEnableIndicate whether the port lock feature is enabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.4.11.1 |
rcPortLockLockedPortsThe set of ports that are administratively locked.
Locked ports cannot be modified in anyway until the
port is unlocked first.rw PortSet .1.3.6.1.4.1.2272.1.4.11.2 |
rcChasBrouterPortsUsed to indicate which ports in the system are
configured as Brouter ports.ro PortSet .1.3.6.1.4.1.2272.1.4.17 |
rcChasFtpDaemonInSecondaryCpuUsed to enable/disable FTP daemon in 2nd cpu.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.4.26 |
rcChasNewVlanOptmModeVlan Optimization mode.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.4.28 |
rcChasVlanOptmModeVlan Optimization mode the switch currently has
booted and will remain the same until the next
reboot.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.4.29 |
rcChasRspModeThis configuration is for enabling/disabling 256K
mode. The change will take effect upon reboot.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.4.35 |
rcChasRspOperModeR-mode the switch currently has booted and
will remain the same until the next reboot.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.4.36 |
rcChasRspModeErrorUsed to indicate the r-mode error statusro Enumeration .1.3.6.1.4.1.2272.1.4.37 |
rcChasNewMulticastResourceReservationUsed to reserve MGIDs for IP Multicast.
The change will take effect upon reboot.rw Integer32 .1.3.6.1.4.1.2272.1.4.44 |
rcChasMulticastResourceReservationMGIDs the switch currently has reserved for IP
Multicast; will remain the same until the next
reboot.ro Integer32 .1.3.6.1.4.1.2272.1.4.45 |
rcChasNewMaxVlanResourceReservationA mode where all MGIDs are reserved for VLAN use
only; no IPMC. The change will take effect upon
reboot.rw EnableValue .1.3.6.1.4.1.2272.1.4.46 |
rcChasMaxVlanResourceReservationTells if all MGIDs are reserved for VLAN use. Will
remain the same until the next reboot.ro EnableValue .1.3.6.1.4.1.2272.1.4.47 |
rcChasMgidUsageVlanCurrentNumber of MGIDs currently used for VLAN, including
SMLTro Integer32 .1.3.6.1.4.1.2272.1.4.48 |
rcChasMgidUsageVlanRemainingNumber of MGIDs remaining allocated for VLANro Integer32 .1.3.6.1.4.1.2272.1.4.49 |
rcChasMgidUsageMulticastCurrentNumber of MGIDs currently used for IPMCro Integer32 .1.3.6.1.4.1.2272.1.4.50 |
rcChasMgidUsageMulticastRemainingNumber of MGIDs remaining allocated for IPMCro Integer32 .1.3.6.1.4.1.2272.1.4.51 |
rcChasForceTopologyIpFlagEnableUsed to enable/disable flag which is used to set the CLIP-ip as topology iprw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.4.53 |
rcChasCircuitlessIpIdThe Clip-Id set by the user to be used as Topology-ip.
'0' means no circuitless IP id while '1..256' is valid
circuitless Idrw Integer32 .1.3.6.1.4.1.2272.1.4.54 |
rcMirror OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.5 |
rcDipSwitch OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.6 |
rcTblSize OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.7 |
rcTblRmonStatSizeUsed to indicate the current size of the RMON
Statistic table.ro Integer32 .1.3.6.1.4.1.2272.1.7.1 |
rcTblRmonHistoryControlSizeUsed to indicate the current size of the RMON
History Control table.ro Integer32 .1.3.6.1.4.1.2272.1.7.2 |
rcTblRmonHistoryEnetSizeUsed to indicate the current size of the RMON
History Ethernet table.ro Integer32 .1.3.6.1.4.1.2272.1.7.3 |
rcTblRmonAlarmSizeUsed to indicate the current size of the RMON
Alarm table.ro Integer32 .1.3.6.1.4.1.2272.1.7.4 |
rcTblRmonEventSizeUsed to indicate the current size of the RMON
Event table.ro Integer32 .1.3.6.1.4.1.2272.1.7.5 |
rcTblRmonLogSizeUsed to indicate the current size of the RMON
Log table.ro Integer32 .1.3.6.1.4.1.2272.1.7.6 |
rcTblArTblSizeUsed to indicate the size of the Address
Translation (AR) table.ro Integer32 .1.3.6.1.4.1.2272.1.7.7 |
rcTblArFreeUsed to indicate the number of free
entries that are available in the Address
Translation (AR) table.ro Integer32 .1.3.6.1.4.1.2272.1.7.8 |
rcTblArNoSpaceUsed to indicate the number of entries that could
not be added to the Address Translation (AR) table
due to lack of space.ro Integer32 .1.3.6.1.4.1.2272.1.7.9 |
rcTblArAddedUsed to indicate the number of entries added to
the Address Translation (AR) table.ro Integer32 .1.3.6.1.4.1.2272.1.7.10 |
rcTblArDeletedUsed to indicate the number of entries deleted to
the Address Translation (AR) table.ro Integer32 .1.3.6.1.4.1.2272.1.7.11 |
rcTblArMacAddedUsed to indicate the number of MAC entries added to
the Address Translation (AR) table.ro Integer32 .1.3.6.1.4.1.2272.1.7.12 |
rcTblArMacDeletedUsed to indicate the number of MAC entries deleted to
the Address Translation (AR) table.ro Integer32 .1.3.6.1.4.1.2272.1.7.13 |
rcTblArMacMovedUsed to indicate the number of MAC entries moved in
the Address Translation (AR) table.ro Integer32 .1.3.6.1.4.1.2272.1.7.14 |
rcTblArIpAddedUsed to indicate the number of IP entries added to
the Address Translation (AR) table.ro Integer32 .1.3.6.1.4.1.2272.1.7.15 |
rcTblArIpDeletedUsed to indicate the number of IP entries deleted to
the Address Translation (AR) table.ro Integer32 .1.3.6.1.4.1.2272.1.7.16 |
rcTblArMcastTblSizeUsed to indicate the size of the Multicast
Address Translation (AR) table.ro Integer32 .1.3.6.1.4.1.2272.1.7.17 |
rcTblArFreeMcastGroupsUsed to indicate the number of free multicast
groups availabe in the Address Translation (AR)
table.ro Integer32 .1.3.6.1.4.1.2272.1.7.18 |
rcTblArIpMcastAddedUsed to indicate the number of Ip multicast
entries that are added to the Address
Translation (AR) table.ro Integer32 .1.3.6.1.4.1.2272.1.7.19 |
rcTblArIpMcastDeletedUsed to indicate the number of Ip multicast
entries that are deleted from the Address
Translation (AR) table.ro Integer32 .1.3.6.1.4.1.2272.1.7.20 |
rcTblArVlanByPortAddedUsed to indicate the number of VLAN by port
entries that are added to the Address
Translation (AR) table.ro Integer32 .1.3.6.1.4.1.2272.1.7.21 |
rcTblArVlanByPortDeletedUsed to indicate the number of VLAN by port
entries that are deleted from the Address
Translation (AR) table.ro Integer32 .1.3.6.1.4.1.2272.1.7.22 |
rcTblArVlanByProtocolAddedUsed to indicate the number of Vlans by
Protocol Type entries that are added to
the Address Translation (AR) table.ro Integer32 .1.3.6.1.4.1.2272.1.7.23 |
rcTblArVlanByProtocolDeletedUsed to indicate the number of Vlans by
Protocol Type entries that are deleted from
the Address Translation (AR) table.ro Integer32 .1.3.6.1.4.1.2272.1.7.24 |
rcTblArVlanByIpSubnetAddedUsed to indicate the number of VLAN by Ip
entries that are added to the Address
Translation (AR) table.ro Integer32 .1.3.6.1.4.1.2272.1.7.25 |
rcTblArVlanByIpSubnetDeletedUsed to indicate the number of VLAN by Ip
entries that are deleted from the Address
Translation (AR) table.ro Integer32 .1.3.6.1.4.1.2272.1.7.26 |
rcTblArIpSubnetsAddedUsed to indicate the number of Ip subnet
entries that are added to the Address
Translation (AR) table.ro Integer32 .1.3.6.1.4.1.2272.1.7.27 |
rcTblArIpSubnetsDeletedUsed to indicate the number of Ip subnet
entries that are deleted from the Address
Translation (AR) table.ro Integer32 .1.3.6.1.4.1.2272.1.7.28 |
rcTblArRsvpsAddedUsed to indicate the number of RSVP
entries that are added to the Address
Translation (AR) table.ro Integer32 .1.3.6.1.4.1.2272.1.7.29 |
rcTblArRsvpsDeletedUsed to indicate the number of RSVP
entries that are deleted from the Address
Translation (AR) table.ro Integer32 .1.3.6.1.4.1.2272.1.7.30 |
rcTblBrdgFdbSizeUsed to indicate the number of entries in the
dot1d forwarding database table.ro Integer32 .1.3.6.1.4.1.2272.1.7.31 |
rcTblBrdgStaticSizeUsed to indicate the number of entries in the
dot1d Static Address Filtering table.ro Integer32 .1.3.6.1.4.1.2272.1.7.32 |
rcTblIpAddrSizeUsed to indicate the number of entries in the
IP Address table.ro Integer32 .1.3.6.1.4.1.2272.1.7.33 |
rcTblIpForwardingSizeUsed to indicate the number of entries in the
IP Forwarding/Best Route table.ro Integer32 .1.3.6.1.4.1.2272.1.7.34 |
rcTblIpNetToMediaSizeUsed to indicate the number of entries in the
IP Net-to-media table.ro Integer32 .1.3.6.1.4.1.2272.1.7.35 |
rcTblIpBestPlusAltRouteSizero Integer32 .1.3.6.1.4.1.2272.1.7.36 |
rcTblIpBestPathSizero Integer32 .1.3.6.1.4.1.2272.1.7.37 |
rcTblIpBestPlusAltPathSizero Integer32 .1.3.6.1.4.1.2272.1.7.38 |
rcIp OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.8 |
rcIpConf OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.8.1 |
rcIpConfTableA table used to maintain IP routing information
for a particular interface. SEQUENCE OF RcIpConfEntry .1.3.6.1.4.1.2272.1.8.1.1 |
rcIpConfEntryEntry containing IP routing information. An entry
is automatically created in this table when routing
is enabled for an interface -or- when an ip address
is configured on an interface. RcIpConfEntry .1.3.6.1.4.1.2272.1.8.1.1.1 |
rcIpConfIfIndexAn unique value to identify a physical interface
or a logical interface (VLAN).ro InterfaceIndexOrZero .1.3.6.1.4.1.2272.1.8.1.1.1.1 |
rcIpConfAdvertDefRteUsed to indicate whether this interface should
advertize a RIP default route.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.1.1.1.2 |
rcIpConfAcceptDefRteUsed to indicate whether this interface should
accept a RIP default route.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.1.1.1.3 |
rcIpConfRowStatusRow status for this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.1.1.1.4 |
rcIpConfRipEnableEnable or disable RIP routing on the specified
interface.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.1.1.1.5 |
rcIpConfOspfEnableEnable or disable OSPF routing on the specified
interface.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.1.1.1.6 |
rcIpConfIgmpEnableEnable or disable IGMP on the specified
interface.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.1.1.1.7 |
rcIpConfAddrAssignedIndicate whether IpAddress has been assigned
for this interface.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.1.1.1.8 |
rcIpConfDhcpEnableEnable or disable DHCP on the specified
interface.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.1.1.1.9 |
rcIpConfTriggeredUpdateEnableUsed to indicate whether the RIP triggered update
feature should be enabled on this interface.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.1.1.1.10 |
rcIpConfAutoAggrerateEnableUsed to indicate whether the auto aggregation
feature should be enabled on this interface.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.1.1.1.11 |
rcIpConfGenerateDefaultRouteUsed to indicate whether to generate a default
RIP route on this interface.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.1.1.1.12 |
rcIpConfAdvertiseWhenDownThe value is used indicated whether vlan state change
should be notified to layer 3 or not, provided the vlan
is configured as routable interface. Also used for
single routable ports, in that case the criteria for
state is PortOperStatus.
Vlan is considered as UP if atleast one member of the
port based vlan has link up, or atleast one port member
of the policy based has an entry in the MGID or atleast
one static member of the policy based vlan has link up.
Otherwise, vlan is considered as DOWN.
If the value is 'true' then the interface state change
will not be notified to layer 3. (i.e., it always stays
up). If the value is 'false' then the vlan state change
will be notified to layer 3 so that IP related status
reflects routable interface state.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.1.1.1.13 |
rcIpConfDirectBroadcastEnableUsed to indicate whether this interface should
forward direct broadcast trafficrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.1.1.1.14 |
rcIpConfRipInPolicyUsed to indicate whether this interface should
advertize a RIP default route.rw DisplayString .1.3.6.1.4.1.2272.1.8.1.1.1.15 |
rcIpConfRipOutPolicyUsed to indicate whether this interface should
accept a RIP default route.rw DisplayString .1.3.6.1.4.1.2272.1.8.1.1.1.16 |
rcIpConfOspfIfTypeOSPF Interface Type.rw Enumeration .1.3.6.1.4.1.2272.1.8.1.1.1.17 |
rcIpConfRipCostUsed to indicate the rip cost for this interface.rw INTEGER .1.3.6.1.4.1.2272.1.8.1.1.1.18 |
rcIpConfRipHolddownUsed to indicate the rip holddown timer for this
interfacerw INTEGER .1.3.6.1.4.1.2272.1.8.1.1.1.19 |
rcIpConfRipTimeoutUsed to indicate the rip timeout interval for this
interfacerw INTEGER .1.3.6.1.4.1.2272.1.8.1.1.1.20 |
rcIpConfRsmltEnableUsed to enable Route Smlt feature.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.1.1.1.21 |
rcIpConfReversePathCheckEnableUsed to indicate whether this interface should
perform Reverse Path Checkrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.1.1.1.22 |
rcIpConfReversePathCheckModeReverse Path Checking mode.rw Enumeration .1.3.6.1.4.1.2272.1.8.1.1.1.23 |
rcIpConfIpVpnLiteEnableEnable or disable ipvpn-lite capability on the specified
circuitless ip interface.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.1.1.1.26 |
rcIpConfOspfTableA table used to maintain OSPF information
for a particular interface. SEQUENCE OF RcIpConfOspfEntry .1.3.6.1.4.1.2272.1.8.1.2 |
rcIpConfOspfEntryEntry containing OSPF information. An entry is
automatically created in this table when routing
is enabled for an interface -or- when an ip address
is configured on an interface. RcIpConfOspfEntry .1.3.6.1.4.1.2272.1.8.1.2.1 |
rcIpConfOspfIfIndexAn unique value to identify a physical interface
or a logical interface (VLAN).ro InterfaceIndexOrZero .1.3.6.1.4.1.2272.1.8.1.2.1.1 |
rcIpConfOspfRtrPriorityThe priority of this interface. Used in multi-
access networks, this field is used in the
designated router election algorithm. The value 0
signifies that the router is not eligible to become
the designated router on this particular network.
In the event of a tie in this value, routers will
use their router id as a tie breaker.rw INTEGER (0..'FF'h) .1.3.6.1.4.1.2272.1.8.1.2.1.2 |
rcIpConfOspfMetricThe metric for this type of service (TOS) on this
interface. The default value of the TOS 0 Metric
is (10^9 / ifSpeed). The value FFFF means 'no route
via this TOS'. A value of 0 means the interface speed
(rcIpConfOspfDefaultMetric) will be used as metric
value, when the state of the interface is up.rw INTEGER (0..'FFFF'h) .1.3.6.1.4.1.2272.1.8.1.2.1.3 |
rcIpConfOspfAuthKeyThe Authentication Key. If the Area's
Authorization Type is simplePassword, and the key
length is shorter than 8 octets, the agent will
left adjust and zero fill to 8 octets.
Note that unauthenticated interfaces need no
authentication key, and simple password authen-
tication cannot use a key of more than 8 oc-
tets. Larger keys are useful only with authen-
tication mechanisms not specified in this docu-
ment.
When read, ospfIfAuthKey always returns an Octet
String of length zero.rw DisplayString .1.3.6.1.4.1.2272.1.8.1.2.1.4 |
rcIpConfOspfRowStatusRow status for this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.1.2.1.5 |
rcIpConfOspfHelloIntervalThe length of time, in seconds, between the
Hello packets that the router sends on the
interface. This value must be the same for all
routers attached to a common network.rw INTEGER (1..'FFFF'h) .1.3.6.1.4.1.2272.1.8.1.2.1.6 |
rcIpConfOspfRtrDeadIntervalThe number of seconds that a router's Hello
packets have not been seen before it's
neighbors declare the router down. This should
be some multiple of the Hello interval. This
value must be the same for all routers attached
to a common network.rw INTEGER (0..'7FFFFFFF'h) .1.3.6.1.4.1.2272.1.8.1.2.1.7 |
rcIpConfOspfIfAreaIdA 32-bit integer uniquely identifying the area to
which the interface connects. Area ID 0.0.0.0 is used
for the OSPF backbone.rw IpAddress .1.3.6.1.4.1.2272.1.8.1.2.1.8 |
rcIpConfOspfAuthTypeThe authentication type specified for an interface.
Additional authentication types may be assigned locally.rw Enumeration .1.3.6.1.4.1.2272.1.8.1.2.1.9 |
rcIpConfOspfPollIntervalOSPF NBMA Interface Poll Interval.rw INTEGER .1.3.6.1.4.1.2272.1.8.1.2.1.10 |
rcIpConfOspfIfMtuIgnoreMtu-ignore flag is for ignoring the mtu checking in
ospf bdbrw Enumeration .1.3.6.1.4.1.2272.1.8.1.2.1.11 |
rcIpConfOspfDefaultMetric OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.8.1.3 |
rcIpConfOspfDefaultMetric10MegPortUsed to indicate the cost associated with
10Meg Interface(Port).rw INTEGER (1..'FFFF'h) .1.3.6.1.4.1.2272.1.8.1.3.1 |
rcIpConfOspfDefaultMetric100MegPortUsed to indicate the cost associated with
100Meg Interface(Port).rw INTEGER (1..'FFFF'h) .1.3.6.1.4.1.2272.1.8.1.3.2 |
rcIpConfOspfDefaultMetric1000MegPortUsed to indicate the cost associated with
1000Meg Interface(Port).rw INTEGER (1..'FFFF'h) .1.3.6.1.4.1.2272.1.8.1.3.3 |
rcIpConfOspfDefaultMetric10000MegPortUsed to indicate the cost associated with
10000Meg Interface(Port).rw INTEGER (1..'FFFF'h) .1.3.6.1.4.1.2272.1.8.1.3.4 |
rcIpConfOspf OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.8.1.4 |
rcIpConfOspfTrapEnableUsed to indicate whether Ospf Traps should be sent.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.1.4.1 |
rcIpConfOspfAutoVirtLinkEnableUsed to indicate whether auto virtual link
creation is enabled or not. If set to true
OSPF will create virtual links between
ABRs whether it is needed or not, but adjacency
will established only when one of the ABR
losses connection to backbone area. If set to
false then it is user resposibity to create
virtual link whenever needed.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.1.4.2 |
rcIpConfOspfSpfHoldDownTimeThe SPF Hold Down Timer value. The SPF will run
at most once per hold down timer value.rw INTEGER .1.3.6.1.4.1.2272.1.8.1.4.3 |
rcIpConfOspfActionrw Enumeration .1.3.6.1.4.1.2272.1.8.1.4.4 |
rcIpConfOspfRfc1583CompatibilityControls the preference rules used when choosing
among multiple AS-External-LSAs advertising the
same destination. When this is enabled, the
preference rule will be same as specified by
RFC1583. When disabled, the new preference rule
as described in RFC2328 will be applicable, which
potentially prevents the routing loops when
AS-External-LSAs for the same destination have
been originated from different areas.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.1.4.5 |
rcIpConfGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.8.1.6 |
rcIpConfGlobalRipHoldDownTimeUsed to set the system-wide RIP hold down time
in seconds.rw INTEGER .1.3.6.1.4.1.2272.1.8.1.6.1 |
rcIpConfGlobalIcmpNetUnreachUsed to set the icmp net unreach feature
enable/disable.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.1.6.2 |
rcIpConfGlobalEcmpEnableUsed to set the ecmp enable/disable.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.1.6.3 |
rcIpConfGlobalEcmpMaxPathUsed to globally configure maximum ECMP paths number.rw INTEGER .1.3.6.1.4.1.2272.1.8.1.6.4 |
rcIpConfGlobalAlternativeEnableUsed to globally configure alternative enable.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.1.6.5 |
rcIpConfGlobalRouteDiscoveryEnableEnable/disable ICMP Route Discovery featurerw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.1.6.6 |
rcIpConfGlobalRipTimeOutIntervalRip TimeOut Interval in secondsrw INTEGER .1.3.6.1.4.1.2272.1.8.1.6.8 |
rcIpConfGlobalRipDefImportMetricRip def import metricrw INTEGER .1.3.6.1.4.1.2272.1.8.1.6.9 |
rcIpConfGlobalEcmp1PathListRoutes to networks specified in this prefix-list
can have upto 1 ECMP path, irrespective of
ecmp-max-path configurationrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.1.6.10 |
rcIpConfGlobalEcmp2PathListRoutes to networks specified in this prefix-list
can have upto 2 ECMP path, irrespective of
ecmp-max-path configuration.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.1.6.11 |
rcIpConfGlobalEcmp3PathListRoutes to networks specified in this prefix-list
can have upto 3 ECMP path, irrespective of
ecmp-max-path configuration.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.1.6.12 |
rcIpConfGlobalEcmp4PathListRoutes to networks specified in this prefix-list
can have upto 4 ECMP path, irrespective of
ecmp-max-path configuration.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.1.6.13 |
rcIpConfGlobalEcmpPathListApplyThis is to apply any changes in ECMP path list
configuration or in the prefix-lists configured to
be used as path listrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.1.6.14 |
rcIpConfGlobalIcmpRedirectMsgrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.1.6.15 |
rcIpConfGlobalArpThresholdDefines the maximum number of outstanding arp request
a switch can generate.rw INTEGER .1.3.6.1.4.1.2272.1.8.1.6.17 |
rcIpConfGlobalAllowMoreSpecificNonLocalRouteEnableUsed to determine whether more specific non local routes
will go into the routing table.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.1.6.18 |
rcIpConfGlobalUdpCheckSumEnableEnable/disable UDP checksum calculationrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.1.6.19 |
rcIpConfGlobalSuperNetEnableUsed to globally enable Supernetting/ CIDR
routing for IPrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.1.6.20 |
rcIpConfGlobalEcmp5PathListRoutes to networks specified in this prefix-list
can have upto 5 ECMP path, irrespective of
ecmp-max-path configuration.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.1.6.21 |
rcIpConfGlobalEcmp6PathListRoutes to networks specified in this prefix-list
can have upto 6 ECMP path, irrespective of
ecmp-max-path configuration.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.1.6.22 |
rcIpConfGlobalEcmp7PathListRoutes to networks specified in this prefix-list
can have upto 7 ECMP path, irrespective of
ecmp-max-path configuration.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.1.6.23 |
rcIpConfGlobalEcmp8PathListRoutes to networks specified in this prefix-list
can have upto 8 ECMP path, irrespective of
ecmp-max-path configuration.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.1.6.24 |
rcIpConfGlobalArpMcastMacFloodingEnable/disable Ip Arp Multicast Mac Flooding feature.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.1.6.26 |
rcIpConfOspfAreaTableA table used to maintain OSPF information
for a particular Area. SEQUENCE OF RcIpConfOspfAreaEntry .1.3.6.1.4.1.2272.1.8.1.7 |
rcIpConfOspfAreaEntryEntry containing OSPF Area configuration
information. An entry is automatically created
in this table when an area is configured through
ospfAreaTable in (rfc1253rcc.mib). RcIpConfOspfAreaEntry .1.3.6.1.4.1.2272.1.8.1.7.1 |
rcIpConfOspfAreaIdAn unique value to identify an area. Area ID
0.0.0.0 is used for the OSPF backbone.ro IpAddress .1.3.6.1.4.1.2272.1.8.1.7.1.1 |
rcIpConfOspfAreaImportSummaryThe area's support for importing Summary
advertisements into a stub area. This field
should be used only if ospfImportASExtern is
set to FALSErw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.1.7.1.2 |
rcIpConfOspfAreaActiveIfCountThis variable displays the number of active
interfaces configured in this area. An area
cannot be deleted if this value is > 0.ro Integer32 .1.3.6.1.4.1.2272.1.8.1.7.1.3 |
rcIpConfOspfAreaAggregateTableA table used to maintain OSPF summary route
metric parameter for a particular Area range. SEQUENCE OF RcIpConfOspfAreaAggregateEntry .1.3.6.1.4.1.2272.1.8.1.10 |
rcIpConfOspfAreaAggregateEntryEntry containing OSPF summary route metric
parameter for a particular Area range.
An entry is automatically created in this
table when an area range is configured through
ospfAreaAggregateTable in rfc1850rcc.mib RcIpConfOspfAreaAggregateEntry .1.3.6.1.4.1.2272.1.8.1.10.1 |
rcIpConfOspfAreaAggregateAreaIDThe Area the Address Aggregate is to be found
within.ro IpAddress .1.3.6.1.4.1.2272.1.8.1.10.1.1 |
rcIpConfOspfAreaAggregateLsdbTypeThe type of the Address Aggregate. This field
specifies the Lsdb type that this Address Ag-
gregate applies to.ro Enumeration .1.3.6.1.4.1.2272.1.8.1.10.1.2 |
rcIpConfOspfAreaAggregateNetThe IP Address of the Net or Subnet indicated
by the range.ro IpAddress .1.3.6.1.4.1.2272.1.8.1.10.1.3 |
rcIpConfOspfAreaAggregateMaskThe Subnet Mask that pertains to the Net or
Subnet.ro IpAddress .1.3.6.1.4.1.2272.1.8.1.10.1.4 |
rcIpConfOspfAreaAggregateAdvertiseMetricUsed to specify a metric for a Summary LSA (type
3) generated by OSPF through an area range.
If this metric is set to 0, OSPF uses the cost
to the farthest point in the networks being
summarized as the metric.rw INTEGER .1.3.6.1.4.1.2272.1.8.1.10.1.5 |
rcIpConfOspfAreaAggregateEffectSubnets subsumed by ranges either trigger the
advertisement of the indicated aggregate (ad-
vertiseMatching), or result in the subnet's not
being advertised at all outside the area.rw Enumeration .1.3.6.1.4.1.2272.1.8.1.10.1.6 |
rcIpConfRsmltTableA table used to maintain OSPF summary route
metric parameter for a particular Area range. SEQUENCE OF RcIpConfRsmltEntry .1.3.6.1.4.1.2272.1.8.1.11 |
rcIpConfRsmltEntryEntry containing OSPF summary route metric
parameter for a particular Area range.
An entry is automatically created in this
table when an area range is configured through
ospfAreaAggregateTable in rfc1850rcc.mib RcIpConfRsmltEntry .1.3.6.1.4.1.2272.1.8.1.11.1 |
rcIpConfRsmltIfIndexInterface Index, this is an index of the table.ro InterfaceIndex .1.3.6.1.4.1.2272.1.8.1.11.1.1 |
rcIpConfRsmltHoldDownTimerTimer value, the range of value is from 0 to 3600.rw INTEGER .1.3.6.1.4.1.2272.1.8.1.11.1.2 |
rcIpConfRsmltHoldUpTimerThe range of value 0 to 3600 or 9999. 9999 means
infinity.rw INTEGER (0..3600 | 9999) .1.3.6.1.4.1.2272.1.8.1.11.1.3 |
rcIpConfRsmltRowStatusRow Status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.1.11.1.4 |
rcIpAddrTableThe table of addressing information relevant to
this entity's IP addresses.
This table is identical to the ipAddrTable in
MIB2 except the columns rcIpAdEntIfIndex and
rcIpAdEntAddr are reversed. Also, the table
is indexed by both these variables. SEQUENCE OF RcIpAddrEntry .1.3.6.1.4.1.2272.1.8.2 |
rcIpAddrEntryThe addressing information for one of this
entity's IP addresses. RcIpAddrEntry .1.3.6.1.4.1.2272.1.8.2.1 |
rcIpAdEntIfIndexThe index value which uniquely identifies the
interface to which this entry is applicable. The
interface identified by a particular value of this
index is the same interface as identified by the
same value of ifIndex.ro InterfaceIndex .1.3.6.1.4.1.2272.1.8.2.1.1 |
rcIpAdEntAddrThe IP address to which this entry's addressing
information pertains.ro IpAddress .1.3.6.1.4.1.2272.1.8.2.1.2 |
rcIpAdEntNetMaskThe subnet mask associated with the IP address of
this entry. The value of the mask is an IP
address with all the network bits set to 1 and all
the hosts bits set to 0.rw IpAddress .1.3.6.1.4.1.2272.1.8.2.1.3 |
rcIpAdEntBcastAddrFormatThe IP broadcast address format used on this
interface.ro Enumeration .1.3.6.1.4.1.2272.1.8.2.1.4 |
rcIpAdEntReasmMaxSizeThe size of the largest IP datagram which this
entity can re-assemble from incoming IP fragmented
datagrams received on this interface.ro INTEGER .1.3.6.1.4.1.2272.1.8.2.1.5 |
rcIpAdEntRowStatusUsed to create/delete entriesrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.2.1.6 |
rcIpAdEntVlanIdA value that uniquely identifies the Virtual LAN
associated with this entry. This value corresponds
to the lower 12 bits in the IEEE 802.1Q VLAN Tag.rw INTEGER .1.3.6.1.4.1.2272.1.8.2.1.7 |
rcIpAdEntBrouterPortUsed to indicate whether this entry correponds
to a brouter port (as oppose to a routable VLAN).
This value cannot be changed after the row is
created.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.2.1.8 |
rcIpAdEntMacOffsetUsed to translate the ip address into mac address.
The system has 512 mac addresses of which 0-507 are reserved for
Boardwalk box. 508-511 is reserved for MG. One can either
mention a mac offset while configuring an ip on the
vlan or it can be alloted by the system within the above range.rw INTEGER .1.3.6.1.4.1.2272.1.8.2.1.9 |
rcIpAdEntIfTypeThe address entry IfType indicates the type of the
interface. In the case of circuit-less-IP there is
no association with any ports. In other words, it can
be thought of as a virtual interface. The value
'brouter port' indicates this interface is associated
with a specific physical port. The value 'vlan'
indicates a logical port that contains one or physical
ports/MLT ports.ro Enumeration .1.3.6.1.4.1.2272.1.8.2.1.10 |
rcIpAdEntVrfIdThe VrfId used in this table is to associate VLANs
or Brouter ports to a VRF after the creation of VLANs
or Brouter ports.
VRFID 0 is reserved for the Administrative VRF.rw VrfIdentifier .1.3.6.1.4.1.2272.1.8.2.1.12 |
rcIpFlowTableIpFlow Table. This table contain entries that
correspond to RSVP records in the switching
fabric Address Resolution table.
A connection that has a matching entry in this
table will be processed with a higher priority
than connections that do not have an entry. SEQUENCE OF RcIpFlowEntry .1.3.6.1.4.1.2272.1.8.3 |
rcIpFlowEntryProprietary flow control variables. RcIpFlowEntry .1.3.6.1.4.1.2272.1.8.3.1 |
rcIpFlowSrcIpAddressThe source IP address of an IP packet.ro IpAddress .1.3.6.1.4.1.2272.1.8.3.1.1 |
rcIpFlowSrcIpPortThe source port of an IP packet. A zero value
in this field is used as a wildcard value.ro INTEGER .1.3.6.1.4.1.2272.1.8.3.1.2 |
rcIpFlowDstIpAddressThe destination IP address of an IP packet.ro IpAddress .1.3.6.1.4.1.2272.1.8.3.1.3 |
rcIpFlowDstIpPortThe destination port of an IP packet. A zero
value in this field is used as a wildcard value.ro INTEGER .1.3.6.1.4.1.2272.1.8.3.1.4 |
rcIpFlowProtocolThe protocol type of an IP packet. A zero value
in this field is used as a wildcard value.ro Enumeration .1.3.6.1.4.1.2272.1.8.3.1.5 |
rcIpFlowRowStatusStatus of entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.3.1.6 |
rcIpRouteTableThis entity's IP Routing table. SEQUENCE OF RcIpRouteEntry .1.3.6.1.4.1.2272.1.8.7 |
rcIpRouteEntryA route to a particular destination. RcIpRouteEntry .1.3.6.1.4.1.2272.1.8.7.1 |
rcIpRouteDestThe destination IP address of this route. An
entry with a value of 0.0.0.0 is considered a
default route. Multiple routes to a single
destination can appear in the table, but access to
such multiple entries is dependent on the table-
access mechanisms defined by the network
management protocol in use.ro IpAddress .1.3.6.1.4.1.2272.1.8.7.1.1 |
rcIpRouteMaskIndicate the mask to be logical-ANDed with the
destination address before being compared to the
value in the rcIpRouteDest field. For those systems
that do not support arbitrary subnet masks, an
agent constructs the value of the rcIpRouteMask by
determining whether the value of the correspondent
rcIpRouteDest field belong to a class-A, B, or C
network, and then using one of:
mask network
255.0.0.0 class-A
255.255.0.0 class-B
255.255.255.0 class-C
If the value of the rcIpRouteDest is 0.0.0.0 (a
default route), then the mask value is also
0.0.0.0. It should be noted that all IP routing
subsystems implicitly use this mechanism.ro IpAddress .1.3.6.1.4.1.2272.1.8.7.1.2 |
rcIpRouteNextHopThe IP address of the next hop of this route.
(In the case of a route bound to an interface
which is realized via a broadcast media, the value
of this field is the agent's IP address on that
interface).rw IpAddress .1.3.6.1.4.1.2272.1.8.7.1.3 |
rcIpRouteMetricThe primary routing metric for this route. The
semantics of this metric are determined by the
routing-protocol specified in the route's
rcIpRouteProto value. If this metric is not used,
its value should be set to -1.rw Integer32 .1.3.6.1.4.1.2272.1.8.7.1.4 |
rcIpRouteIfIndexThe index value which uniquely identifies the
local interface through which the next hop of this
route should be reached. The interface identified
by a particular value of this index is the same
interface as identified by the same value of
ifIndex.ro InterfaceIndex .1.3.6.1.4.1.2272.1.8.7.1.5 |
rcIpRouteTypeThe type of route.ro Enumeration .1.3.6.1.4.1.2272.1.8.7.1.6 |
rcIpRouteProtoThe routing mechanism via which this route was
learned. Inclusion of values for gateway routing
protocols is not intended to imply that hosts
should support those protocols.ro Enumeration .1.3.6.1.4.1.2272.1.8.7.1.7 |
rcIpRouteAgeThe number of seconds since this route was last
updated or otherwise determined to be correct.
Note that no semantics of `too old' can be implied
except through knowledge of the routing protocol
by which the route was learned.ro Integer32 .1.3.6.1.4.1.2272.1.8.7.1.8 |
rcIpRouteRowStatusUsed to create/delete entriesrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.7.1.9 |
rcIpRoutePrefro INTEGER .1.3.6.1.4.1.2272.1.8.7.1.10 |
rcIpRouteAltSequenceAlternative Route Sequence. 0 denotes Best Route.ro Integer32 .1.3.6.1.4.1.2272.1.8.7.1.11 |
rcIpRoutePathTypeThe type of route. It is a combination of
direct, indirect, best, alternative and ECMP path.ro Enumeration .1.3.6.1.4.1.2272.1.8.7.1.12 |
rcIpRouteSrcVrfIdsrcVrfId of the next-hop addressrw VrfIdentifier .1.3.6.1.4.1.2272.1.8.7.1.13 |
rcIpRouteNextHopIdIdentifier of the next-hop, hostname or mac adress.ro DisplayString .1.3.6.1.4.1.2272.1.8.7.1.14 |
rcIpConfDhcpTableDHCP configuration table SEQUENCE OF RcIpConfDhcpEntry .1.3.6.1.4.1.2272.1.8.8 |
rcIpConfDhcpEntryUsed to configure DHCP on a particular port. An
entry is created automatically when the variable
rcIpConfDhcpEnable is set to TRUE.
Once created this entry will only be deleted if the
rcIpConfDhcpRowStatus is set to 'destroy(6)'. In
which case, the rcIpConfDhcpEnable is automatically
reset to the FALSE setting. RcIpConfDhcpEntry .1.3.6.1.4.1.2272.1.8.8.1 |
rcIpConfDhcpIfIndexInterface number. The number can represent either
a physical or logical(VLAN) interface.ro InterfaceIndexOrZero .1.3.6.1.4.1.2272.1.8.8.1.1 |
rcIpConfDhcpMaxHopUsed to indicate the maximum number of hops a
DHCP packet can take from the source device to
the destination device (i.e., DHCP client to
DHCP server).rw INTEGER .1.3.6.1.4.1.2272.1.8.8.1.2 |
rcIpConfDhcpMinSecUsed to indicate the minimum number of seconds
to wait between receiving a DHCP packet and
actually forwarding the DHCP packet to the
destination device. A value of zero(0) indicates
forwarding should be done immediately without any
delay.rw INTEGER .1.3.6.1.4.1.2272.1.8.8.1.3 |
rcIpConfDhcpModeUsed to indicate what type of DHCP packets this
interface should support. A value of none(1) will
result in all incoming DHCP and BOOTP packets to
be dropped.rw Enumeration .1.3.6.1.4.1.2272.1.8.8.1.4 |
rcIpConfDhcpRowStatusAn entry is created automatically when the variable
rcIpConfDhcpEnable is set to TRUE.
Once created this entry will only be deleted if the
rcIpConfDhcpRowStatus is set to 'destroy(6)'. In
which case, the rcIpConfDhcpEnable is automatically
reset to the FALSE setting.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.8.1.5 |
rcIpConfDhcpNumRequestsThe total number of DHCP requests seen on this interface.ro Counter32 .1.3.6.1.4.1.2272.1.8.8.1.6 |
rcIpConfDhcpNumRepliesThe total number of DHCP replies seen on this interface.ro Counter32 .1.3.6.1.4.1.2272.1.8.8.1.7 |
rcIpConfDhcpAlwaysBroadcastUsed to indicate if DHCP Reply packets should be
broadcast to the DHCP client on this interface.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.8.1.8 |
rcIpConfDhcpCircuitIdUsed to indicate if DHCP packets should have
option82 circuitId info inserted before sent to
servers, for this interface.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.8.1.11 |
rcIpConfDhcpRemoteIdUsed to indicate if DHCP packets should have
option82 remoteId info inserted before sent to
servers, for this interface.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.8.1.12 |
rcIpConfDhcpTrustedUsed to indicate if DHCP packets come through a
trusted dhcp circuit. This means that packets with
giaddr set to 0 having option82 in it, will be forwarded
if the circuit is trusted.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.8.1.13 |
rcIpConfDhcpAgentAddrThe IP address configured as relay on this interface; it is either the IP of the
physical interface or the IP of the VRRP addressro IpAddress .1.3.6.1.4.1.2272.1.8.8.1.14 |
rcIpDhcpForwardTableDHCP forwarding table. SEQUENCE OF RcIpDhcpForwardEntry .1.3.6.1.4.1.2272.1.8.9 |
rcIpDhcpForwardEntryAn entry used represents a DHCP forwarding directive. RcIpDhcpForwardEntry .1.3.6.1.4.1.2272.1.8.9.1 |
rcIpDhcpForwardAgentAddrThe IP address configured on an interface
(i.e., a locally configured IP address).ro IpAddress .1.3.6.1.4.1.2272.1.8.9.1.1 |
rcIpDhcpForwardServerAddrThe IP address of the DHCP server. If this
IP address corresponds to a locally configured
IP network, the DHCP packet is broadcasted out
the interface the IP address is assigned to.
This behavior is known as 'relay agent' mode.
If this IP address is a remote address, the DHCP
packet is sent via unicast to the remote device.
This behavior is known as 'preferred server' mode.ro IpAddress .1.3.6.1.4.1.2272.1.8.9.1.2 |
rcIpDhcpForwardEnableUsed to indicate whether is entry should be used.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.9.1.3 |
rcIpDhcpForwardModeUsed to indicate whether this entry pertains to
BOOTP packets, DHCP packets, or both.rw Enumeration .1.3.6.1.4.1.2272.1.8.9.1.4 |
rcIpDhcpForwardRowStatusRow status of this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.9.1.5 |
rcIpUdp OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.8.13 |
rcIpUdpProtocolTableSizeUsed to indicate the number of entries in the
rcIpUdpProtocolTable.ro Integer32 .1.3.6.1.4.1.2272.1.8.13.1 |
rcIpUdpProtocolTablelist of UDP protocols. Used to determine whether to
forward the UDP broadcast packet or not. SEQUENCE OF RcIpUdpProtocolEntry .1.3.6.1.4.1.2272.1.8.13.2 |
rcIpUdpProtocolEntryUsed to include a particular UDP port in the table.
An entry in this table indicates that the box might do
forwarding of UDP broadcast packets if there is a
matching entry for this packet in the
rcIpUdpPortFwdTable. RcIpUdpProtocolEntry .1.3.6.1.4.1.2272.1.8.13.2.1 |
rcIpUdpProtocolPortNumberwell-known UDP Port number. Pre-assigned port
number for this protocol. Port used by the
server process as its contact port. It cannot
be BOOTP/DHCP port#s 67, 68.ro INTEGER .1.3.6.1.4.1.2272.1.8.13.2.1.1 |
rcIpUdpProtocolNameUsed to indicate the name of the protocol
that is running on top of UDP protocol.
cannot change the name once created. This
should be set while creating the entry.rw DisplayString .1.3.6.1.4.1.2272.1.8.13.2.1.2 |
rcIpUdpProtocolRowStatusRowstatus of this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.13.2.1.3 |
rcIpUdpPortFwdTableSizeUsed to indicate the number of entries in the
rcIpUdpPortFwdTable.ro Integer32 .1.3.6.1.4.1.2272.1.8.13.3 |
rcIpUdpPortFwdTableUdp forward entry table. SEQUENCE OF RcIpUdpPortFwdEntry .1.3.6.1.4.1.2272.1.8.13.4 |
rcIpUdpPortFwdEntryAn entry is configured to specify forwarding policy
parameters. RcIpUdpPortFwdEntry .1.3.6.1.4.1.2272.1.8.13.4.1 |
rcIpUdpPortFwdDestPortThe well-known port number defined for UDP/TCP
depending on the value of IpProtoType field in this
entry. This port number has to be defined in the
rcIpUdpProtoTable. In order to select this policy the
destination port number has to match the DestPort
value.ro INTEGER .1.3.6.1.4.1.2272.1.8.13.4.1.1 |
rcIpUdpPortFwdDestAddrDestination IP address. The IP addres to which the
UDP/TCP broadcast should be forwarded. This IP address
can be any IP server address or subnet broadcast
address. If the IP address is one of the routable
interface's address on the router, the frame will be
rebroadcast out as a limited broadcast. If the Ip
address is that of a server then the received
broadcast packet will be sent as a unicast packet to
this address.ro IpAddress .1.3.6.1.4.1.2272.1.8.13.4.1.2 |
rcIpUdpPortFwdIdIdentifier of this entry. Used internally to identify
this entry.ro Integer32 .1.3.6.1.4.1.2272.1.8.13.4.1.3 |
rcIpUdpPortFwdFwdListIdListSizeUsed to indicate the number of id(s) in the
rcIpUdpPortFwdListId variable.ro INTEGER .1.3.6.1.4.1.2272.1.8.13.4.1.4 |
rcIpUdpPortFwdFwdListIdListUsed to indicate zero or more rcIpUdpPortFwdListEntry(s)
that are referring to this entry. Each list-id identifier
is stored as two bytes in this array starting from
offset zero. Any unused bytes should be set to zero.ro IdList .1.3.6.1.4.1.2272.1.8.13.4.1.5 |
rcIpUdpPortFwdNumFwdPacketsThe total number of UDP/TCP broadcast packets forwarded
using this policy.ro Counter32 .1.3.6.1.4.1.2272.1.8.13.4.1.6 |
rcIpUdpPortFwdNumDropPacketsTtlExpiredThe total number of UDP/TCP broadcast packets dropped
because the TTL has expired.ro Counter32 .1.3.6.1.4.1.2272.1.8.13.4.1.7 |
rcIpUdpPortFwdNumDropPacketsDestUnreachThe total number of UDP/TCP broadcast packets dropped
because the rcIpUdpPortFwdDestAddr specified in
this policy was unreachable.ro Counter32 .1.3.6.1.4.1.2272.1.8.13.4.1.8 |
rcIpUdpPortFwdRowStatusRow status of this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.13.4.1.9 |
rcIpUdpPortFwdListTableSizeUsed to indicate the number of entries in the
rcIpUdpPortFwdListTable.ro Integer32 .1.3.6.1.4.1.2272.1.8.13.5 |
rcIpUdpPortFwdListTableA table used to group rcIpUdpPortFwdEntry(s)
into a list. SEQUENCE OF RcIpUdpPortFwdListEntry .1.3.6.1.4.1.2272.1.8.13.6 |
rcIpUdpPortFwdListEntryRoute entry attributes. RcIpUdpPortFwdListEntry .1.3.6.1.4.1.2272.1.8.13.6.1 |
rcIpUdpPortFwdListIdA value that uniquely identifies this list of
rcIpUdpPortFwdListEntry.ro INTEGER .1.3.6.1.4.1.2272.1.8.13.6.1.1 |
rcIpUdpPortFwdListNameAn administratively-assigned name for this list.rw DisplayString .1.3.6.1.4.1.2272.1.8.13.6.1.3 |
rcIpUdpPortFwdListFwdIdListSizeUsed to indicate the number of rcIpUdpPortFwdNetEntry
id(s) in the rcIpUdpPortFwdListIdList variable.ro INTEGER .1.3.6.1.4.1.2272.1.8.13.6.1.4 |
rcIpUdpPortFwdListFwdIdListUsed to indicate zero or more UdpPortFwd entries
that are associated to this list. Each entry identifier
is stored as two bytes in this array starting from
offset zero. Any unused bytes should be set to zero.rw OCTET STRING .1.3.6.1.4.1.2272.1.8.13.6.1.5 |
rcIpUdpPortFwdListRowStatusRow status of this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.13.6.1.6 |
rcIpUdpConfBroadcastIntfTableSizeUsed to indicate the number of entries in the
rcIpUdpBroadcastIntfTable.ro Integer32 .1.3.6.1.4.1.2272.1.8.13.7 |
rcIpUdpConfBroadcastIntfTableIP broadcast forward configuration table SEQUENCE OF RcIpUdpConfBroadcastIntfEntry .1.3.6.1.4.1.2272.1.8.13.8 |
rcIpUdpConfBroadcastIntfEntryUsed to configure UDP broadcast forward on a
particular interface. RcIpUdpConfBroadcastIntfEntry .1.3.6.1.4.1.2272.1.8.13.8.1 |
rcIpUdpConfBroadcastIntfLocalIfAddrThe ip address of the local interface that is
partipating in the forwarding UDP broadcast packets.ro IpAddress .1.3.6.1.4.1.2272.1.8.13.8.1.1 |
rcIpUdpConfBroadcastIntfUdpPortFwdListIdUsed to indicate the number UDP ports that this
interface is configured to forward.
A value of '0' indicates that this interface will not
forward any UDP broadcast packets. This is a required
field to create an entry.rw INTEGER .1.3.6.1.4.1.2272.1.8.13.8.1.2 |
rcIpUdpConfBroadcastIntfMaxTtlUsed to indicate the maximum number of hops an
IP broadcast packet can take from the source
device to the destination device.rw INTEGER .1.3.6.1.4.1.2272.1.8.13.8.1.3 |
rcIpUdpConfBroadcastIntfNumRxPktsThe total number of UDP/TCP broadcast packets
received by this local interface.ro Counter32 .1.3.6.1.4.1.2272.1.8.13.8.1.4 |
rcIpUdpConfBroadcastIntfNumFwdPktsThe total number of UDP/TCP broadcast packets
forwarded.ro Counter32 .1.3.6.1.4.1.2272.1.8.13.8.1.5 |
rcIpUdpConfBroadcastIntfNumDropPktsMaxTtlExpiredThe total number of UDP/TCP broadcast packets
dropped because the TTL has expired.ro Counter32 .1.3.6.1.4.1.2272.1.8.13.8.1.6 |
rcIpUdpConfBroadcastIntfNumDropPktsDestUnreachThe total number of UDP broadcast packets
dropped because the destination was unreachable.ro Counter32 .1.3.6.1.4.1.2272.1.8.13.8.1.7 |
rcIpUdpConfBroadcastIntfNumDropPktsUnknownPortThe total number of UDP/TCP broadcast packets
dropped because the destination port/protocol
specified has no matching forwarding policy.ro Counter32 .1.3.6.1.4.1.2272.1.8.13.8.1.8 |
rcIpUdpConfBroadcastIntfRowStatusEntry row status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.13.8.1.9 |
rcIpUdpConfBroadcastIntfBroadCastMaskThe subnet mask of the local interface that is
used for broadcasting the UDP broadcast packets.rw IpAddress .1.3.6.1.4.1.2272.1.8.13.8.1.10 |
rcIpPim OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.8.16 |
rcIpPimGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.8.16.1 |
rcIpPimGlobalEnableenable featurerw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.16.1.1 |
rcIpPimGlobalModerw Enumeration .1.3.6.1.4.1.2272.1.8.16.1.2 |
rcIpPimGlobalRegisterSuppTimerEach source's DR maintains, per (S,G), a Register- Suppression-timer in seconds. The Register-
Suppression-timer is started by the Register-Stop message; upon expiration, the source's DR resumes sending data packets to the RP, encapsulated in
the Register message.rw INTEGER .1.3.6.1.4.1.2272.1.8.16.1.4 |
rcIpPimGlobalInterfaceTableSizetable sizero Integer32 .1.3.6.1.4.1.2272.1.8.16.1.5 |
rcIpPimGlobalUniRouteChgTimeOutThis timer allows a better tuning on how fast the
routing information is going to get updated from
RTM (the frequency at which the RTM is polled for
routing information updates).rw INTEGER .1.3.6.1.4.1.2272.1.8.16.1.6 |
rcIpPimGlobalDiscardDataTimeOutThis timer is used to discard data until the Join
is received from the RP. A ipmc discard record is
created and deleted once the timer expires and/or
when a Join is received.rw INTEGER .1.3.6.1.4.1.2272.1.8.16.1.7 |
rcIpPimGlobalCRPADVTimeOutRouters configured as candidate RPs use this timer
to periodically send C-RP-Adv messages. Upon expiry,
a C-RP-Adv message is sent to the elected BSR.rw INTEGER .1.3.6.1.4.1.2272.1.8.16.1.8 |
rcIpPimGlobalBootStrapPeriodAt the elected BSR, this is the interval between
originating Bootstrap messages.rw INTEGER .1.3.6.1.4.1.2272.1.8.16.1.9 |
rcIpPimGlobalStaticRPEnable/Disable Static RP feature.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.16.1.10 |
rcIpPimGlobalFwdCacheTimeOutPIM forward cache expiry value in seconds.This
value is going to be used in aging PIM mroutes
in seconds.rw INTEGER .1.3.6.1.4.1.2272.1.8.16.1.12 |
rcIpPimGlobalFastJoinPrunePim Fast Join Prune.rw EnableValue .1.3.6.1.4.1.2272.1.8.16.1.13 |
rcIpPimTableIP Pim table SEQUENCE OF RcIpPimEntry .1.3.6.1.4.1.2272.1.8.16.2 |
rcIpPimEntryAn entry of Ip Pim Table. RcIpPimEntry .1.3.6.1.4.1.2272.1.8.16.2.1 |
rcIpPimIfIndexportro InterfaceIndex .1.3.6.1.4.1.2272.1.8.16.2.1.1 |
rcIpPimEnableenable interfacerw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.16.2.1.2 |
rcIpPimModerw Enumeration .1.3.6.1.4.1.2272.1.8.16.2.1.3 |
rcIpPimHelloIntervalfrq. at which hello sent.rw INTEGER .1.3.6.1.4.1.2272.1.8.16.2.1.4 |
rcIpPimJoinPruneIntervalrw INTEGER .1.3.6.1.4.1.2272.1.8.16.2.1.5 |
rcIpPimCBSRPreferencerw INTEGER (-1..255) .1.3.6.1.4.1.2272.1.8.16.2.1.6 |
rcIpPimIntfTypePim interface type.rw Enumeration .1.3.6.1.4.1.2272.1.8.16.2.1.7 |
rcIpPimInterfaceTableIP Pim table SEQUENCE OF RcIpPimInterfaceEntry .1.3.6.1.4.1.2272.1.8.16.3 |
rcIpPimInterfaceEntryAn entry of Ip Pim Interface Table. RcIpPimInterfaceEntry .1.3.6.1.4.1.2272.1.8.16.3.1 |
rcIpPimInterfaceIfIndexportro InterfaceIndex .1.3.6.1.4.1.2272.1.8.16.3.1.1 |
rcIpPimInterfaceOperStateThe current operational state of this PIM interface.
This object is deprecated in favor of ifOperStatus.ro Enumeration .1.3.6.1.4.1.2272.1.8.16.3.1.2 |
rcIpPimInterfaceTypePim interface type.rw Enumeration .1.3.6.1.4.1.2272.1.8.16.3.1.3 |
rcIpPimStaticRPTableThe table lists all the RPs configured statically for
various IP multicast groups. SEQUENCE OF RcIpPimStaticRPEntry .1.3.6.1.4.1.2272.1.8.16.4 |
rcIpPimStaticRPEntryAn entry (conceptual row) in the rcIpPimStaticRPTable. RcIpPimStaticRPEntry .1.3.6.1.4.1.2272.1.8.16.4.1 |
rcIpPimStaticRPGroupAddressThe IP multicast group address which, when combined with
rcIpPimStaticRPGroupMask, identifies a group prefix for
which rcIpPimStaticRPAddress is a static-RP.ro IpAddress .1.3.6.1.4.1.2272.1.8.16.4.1.1 |
rcIpPimStaticRPGroupMaskThe multicast group address mask which, when combined
with rcIpPimStaticRPGroupAddress, identifies a group
prefix for which rcIpPimStaticRPAddress is a static-RP.ro IpAddress .1.3.6.1.4.1.2272.1.8.16.4.1.2 |
rcIpPimStaticRPAddressThe (unicast) address of the static-RP.ro IpAddress .1.3.6.1.4.1.2272.1.8.16.4.1.3 |
rcIpPimStaticRPRowStatusThe status of this row, by which new entries may be
created, or old entries deleted from this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.16.4.1.4 |
rcIpPimStaticRPStatusThe status of StaticRP.ro Enumeration .1.3.6.1.4.1.2272.1.8.16.4.1.5 |
rcIpPimCurrBsr OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.8.16.5 |
rcIpPimCurrBsrAddressCurrent BSR addressro IpAddress .1.3.6.1.4.1.2272.1.8.16.5.1 |
rcIpPimCurrBsrFragmentTagCurrent BSR Fragment Tagro Integer32 .1.3.6.1.4.1.2272.1.8.16.5.2 |
rcIpPimCurrBsrHashMaskCurrent BSR Hash Mask valuero IpAddress .1.3.6.1.4.1.2272.1.8.16.5.3 |
rcIpPimCurrBsrPriorityCurrent BSR Priorityro Integer32 .1.3.6.1.4.1.2272.1.8.16.5.4 |
rcIpPimCurrBsrBootStrapTimerCurrent BSR Boot Strap Timerro Integer32 .1.3.6.1.4.1.2272.1.8.16.5.5 |
rcIpPimVirtualNbrTableTable listing the router's virtual PIM neighbors SEQUENCE OF RcIpPimVirtualNbrEntry .1.3.6.1.4.1.2272.1.8.16.6 |
rcIpPimVirtualNbrEntryAn entry in the virtual PIM neighbors' table. RcIpPimVirtualNbrEntry .1.3.6.1.4.1.2272.1.8.16.6.1 |
rcIpPimVirtualNbrAddressThe IP address of the virtual PIM neighbor for which this entry
contains information. IpAddress .1.3.6.1.4.1.2272.1.8.16.6.1.1 |
rcIpPimVirtualNbrIfIndexThe value of ifIndex for the PIM interface in which this virtual
neighbor is created. This value is mandatory while trying to create
a virtual PIM neighbor.rw InterfaceIndex .1.3.6.1.4.1.2272.1.8.16.6.1.2 |
rcIpPimVirtualNbrRowStatusTo create/delete an entry in the virtual PIM neighbors'
table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.16.6.1.3 |
rcIpMulticastArpTableIP Multicast Arp table SEQUENCE OF RcIpMulticastArpEntry .1.3.6.1.4.1.2272.1.8.17 |
rcIpMulticastArpEntryAn entry of Ip Multicast Arp Table. RcIpMulticastArpEntry .1.3.6.1.4.1.2272.1.8.17.1 |
rcIpMulticastArpVlanIdvlan idro Integer32 .1.3.6.1.4.1.2272.1.8.17.1.1 |
rcIpMulticastArpMacAddressmulticast mac addressro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.17.1.2 |
rcIpMulticastArpIpAddressmulticast ip addressro IpAddress .1.3.6.1.4.1.2272.1.8.17.1.3 |
rcIpMulticastArpPortsports within a particular vlanrw PortSet .1.3.6.1.4.1.2272.1.8.17.1.4 |
rcIpMulticastArpNumMltIdsnumber of mlt idsro Integer32 .1.3.6.1.4.1.2272.1.8.17.1.5 |
rcIpMulticastArpMltIdsmlt idrw IdList -- 1024 octets .1.3.6.1.4.1.2272.1.8.17.1.6 |
rcIpMulticastArpRowStatusrow statusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.17.1.7 |
rcIpRipInterface OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.8.20 |
rcIpRipInterfaceTableIP Rip Interface table SEQUENCE OF RcIpRipInterfaceEntry .1.3.6.1.4.1.2272.1.8.20.1 |
rcIpRipInterfaceEntryAn entry of Ip Rip Interface Table. RcIpRipInterfaceEntry .1.3.6.1.4.1.2272.1.8.20.1.1 |
rcIpRipInterfaceAddressIp Addressro IpAddress .1.3.6.1.4.1.2272.1.8.20.1.1.1 |
rcIpRipInterfaceIfIndexRip Interface If Index.ro InterfaceIndex .1.3.6.1.4.1.2272.1.8.20.1.1.2 |
rcIpRipInterfaceRipEnablerw EnableValue .1.3.6.1.4.1.2272.1.8.20.1.1.3 |
rcIpRipInterfaceAccDefRterw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.20.1.1.4 |
rcIpRipInterfaceAdvDefRterw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.20.1.1.5 |
rcIpRipInterfaceAutoAggregaterw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.20.1.1.6 |
rcIpRipInterfaceCostrw Integer32 .1.3.6.1.4.1.2272.1.8.20.1.1.7 |
rcIpRipInterfaceListenrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.20.1.1.8 |
rcIpRipInterfacePoisonrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.20.1.1.9 |
rcIpRipInterfaceSupplyrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.20.1.1.10 |
rcIpRipInterfaceTriggeredUpdaterw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.20.1.1.11 |
rcIpRipInterfaceInPolicyrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.20.1.1.12 |
rcIpRipInterfaceOutPolicyrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.20.1.1.13 |
rcIpRipInterfaceProxyAnnounceFlagrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.20.1.1.14 |
rcIpRipInterfaceHolddownUsed to indicate the rip holddown timer for this
interfacerw INTEGER .1.3.6.1.4.1.2272.1.8.20.1.1.15 |
rcIpRipInterfaceTimeoutUsed to indicate the rip timeout interval for this
interfacerw INTEGER .1.3.6.1.4.1.2272.1.8.20.1.1.16 |
rcIpMulticastTimedPruneTableThis feature provides the ability for the user to
create (S,G) Forwarding Entries that would not be
pruned until a configurable timer expires. This feature
is targeted for Passport 8600. Currently
the timer value is set to 0. SEQUENCE OF RcIpMulticastTimedPruneEntry .1.3.6.1.4.1.2272.1.8.21 |
rcIpMulticastTimedPruneEntryAn entry of Ip Multicast Timed Prune Table. RcIpMulticastTimedPruneEntry .1.3.6.1.4.1.2272.1.8.21.1 |
rcIpMulticastTimedPruneGroupAddressThis field indicates the IP Multicast Group
Address associated with the IP multicast stream.rw IpAddress .1.3.6.1.4.1.2272.1.8.21.1.1 |
rcIpMulticastTimedPruneSourceAddressThis is the Source Subnet IP address of the
sender of the IP multicast stream.rw IpAddress .1.3.6.1.4.1.2272.1.8.21.1.2 |
rcIpMulticastTimedPruneSrcSubnetMaskThis is the Source Subnet Mask IP address of
the sender of the IP multicast stream.rw IpAddress .1.3.6.1.4.1.2272.1.8.21.1.3 |
rcIpMulticastTimedPruneAgingTimerThis field represents the amount of time
(in minutes) this timed prune entry will be
kept in the forwarding table when there are no
more receivers. After this timer expires, this
timed prune entry would be treated as a normal
DVMRP/PIM forwarding entry. Aging Timer value of
0 (infinite time) indicates this timed prune entry
will not be deleted even when there are no
more receivers.rw Integer32 .1.3.6.1.4.1.2272.1.8.21.1.4 |
rcIpMulticastTimedPruneTimeLeftThis read-only field represents the remaining time
for which this timed prune entry will be kept in
the forwarding table. After this timer expires,
this timed prune entry would be treated as a normal
DVMRP/PIM forwarding entry. 0 in this field indicates
that this entry would not be aged out.ro Integer32 .1.3.6.1.4.1.2272.1.8.21.1.5 |
rcIpMulticastTimedPruneLastActivityThis read-only field represents the actual time since
the traffic has come from this Source, Group pair.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2272.1.8.21.1.6 |
rcIpMulticastTimedPruneRowStatusrow statusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.21.1.7 |
rcIpConfIcmpRdiscTableA table used to maintain ICMP Route discovery information
for a particular interface. SEQUENCE OF RcIpConfIcmpRdiscEntry .1.3.6.1.4.1.2272.1.8.22 |
rcIpConfIcmpRdiscEntryEntry containing ICMP Rdisc information. An entry is
automatically created in this table when routing
is enabled for an interface -or- when an ip address
is configured on an interface. RcIpConfIcmpRdiscEntry .1.3.6.1.4.1.2272.1.8.22.1 |
rcIpConfIcmpRdiscIfIndexAn unique value to identify a physical
interface or a logical interface (VLAN).ro INTEGER .1.3.6.1.4.1.2272.1.8.22.1.1 |
rcIpConfIcmpRdiscAdvAddressAdvertisement address to which the route discovery
advertisements transmitted on this interface.rw IpAddress .1.3.6.1.4.1.2272.1.8.22.1.2 |
rcIpConfIcmpRdiscAdvFlagFlag to indicate whether or not the address is to
be advertised on this interface.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.22.1.3 |
rcIpConfIcmpRdiscAdvLifetimeThe value to be placed in the lifetime field of
Router Advertisements sent from the interface.rw INTEGER .1.3.6.1.4.1.2272.1.8.22.1.4 |
rcIpConfIcmpRdiscMaxAdvIntervalThe maximum time allowed between sending
Router Advertisements from this interface.rw INTEGER .1.3.6.1.4.1.2272.1.8.22.1.5 |
rcIpConfIcmpRdiscMinAdvIntervalThe minimum time allowed between sending
Router Advertisements from this interface.rw INTEGER .1.3.6.1.4.1.2272.1.8.22.1.6 |
rcIpConfIcmpRdiscPreferenceLevelPreferability of the router address as a default
Routerrw INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.2272.1.8.22.1.7 |
rcIpMulticastSoftwareForwarding OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.8.23 |
rcIpMulticastSoftwareForwardingEnableEnable/Disable multicast software
forwarding.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.23.1 |
rcIpMrouteHw OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.8.24 |
rcIpMrouteHwTableThe (conceptual) table containing hardware entries of
multicast routing information for all the Group Address. SEQUENCE OF RcIpMrouteHwEntry .1.3.6.1.4.1.2272.1.8.24.1 |
rcIpMrouteHwEntryAn entry (conceptual row) containing hardware entries of
multicast routing information for a particular Group
Address. RcIpMrouteHwEntry .1.3.6.1.4.1.2272.1.8.24.1.1 |
rcIpMrouteHwGroupAddressThe IP multicast group address for which this entry
contains multicast routing information.ro IpAddress .1.3.6.1.4.1.2272.1.8.24.1.1.1 |
rcIpMrouteHwSubnetThe network address from where the source is sending the
stream of traffic for which this entry contains multicast
routing information.ro IpAddress .1.3.6.1.4.1.2272.1.8.24.1.1.2 |
rcIpMrouteHwInvlanThe Ingress vlan Id from where the traffic is coming for
which this entry contains multicast routing information.ro RcVlanIdOrNone .1.3.6.1.4.1.2272.1.8.24.1.1.3 |
rcIpMrouteHwPrunedThis is to show weather the entry containing multicast
routing information has received Prune message or not.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.24.1.1.4 |
rcIpMrouteHwIndexThis Index value keep tracks of the hardware record that
has been accessed for displaying the entry containing multicast routing information.ro Integer32 .1.3.6.1.4.1.2272.1.8.24.1.1.5 |
rcIpMrouteHwPrunesTableThe (conceptual) table containing prune entries of
multicast routing information for the Group Address. SEQUENCE OF RcIpMrouteHwPrunesEntry .1.3.6.1.4.1.2272.1.8.24.2 |
rcIpMrouteHwPrunesEntryAn entry (conceptual row) containing prune entries of
multicast routing information for a particular Group
Address. RcIpMrouteHwPrunesEntry .1.3.6.1.4.1.2272.1.8.24.2.1 |
rcIpMrouteHwPrunesGroupAddressThe IP multicast group address for which this entry
contains multicast routing information.ro IpAddress .1.3.6.1.4.1.2272.1.8.24.2.1.1 |
rcIpMrouteHwPrunesSubnetThe network address from where the source is sending the
stream of traffic for which this entry contains
multicast routing information.ro IpAddress .1.3.6.1.4.1.2272.1.8.24.2.1.2 |
rcIpMrouteHwPrunesInvlanThe Ingress vlan Id from where the traffic is coming for
which this entry contains multicast routing information.ro RcVlanIdOrNone .1.3.6.1.4.1.2272.1.8.24.2.1.3 |
rcIpMrouteHwPrunesNeighborThe IpAddress from where the Prune message has been
received.ro IpAddress .1.3.6.1.4.1.2272.1.8.24.2.1.4 |
rcIpMrouteHwPrunesTimerThis is to show how much time is left for this particular
entry containing multicast routing information during
which the graft message can be sent.ro Integer32 .1.3.6.1.4.1.2272.1.8.24.2.1.5 |
rcIpMrouteHwSourcesTableThe (conceptual) table containing source entries of
multicast routing information for the Group Address. SEQUENCE OF RcIpMrouteHwSourcesEntry .1.3.6.1.4.1.2272.1.8.24.3 |
rcIpMrouteHwSourcesEntryAn entry (conceptual row) containing source entries of
multicast routing information for a particular Group
Address. RcIpMrouteHwSourcesEntry .1.3.6.1.4.1.2272.1.8.24.3.1 |
rcIpMrouteHwSourcesGroupAddressThe IP multicast group address for which this entry
contains multicast routing information.ro IpAddress .1.3.6.1.4.1.2272.1.8.24.3.1.1 |
rcIpMrouteHwSourcesSubnetThe network address from where the source is sending the
stream of traffic for which this entry contains
multicast routing information.ro IpAddress .1.3.6.1.4.1.2272.1.8.24.3.1.2 |
rcIpMrouteHwSourcesInvlanThe Ingress vlan Id from where the traffic is coming for
which this entry contains multicast routing information.ro RcVlanIdOrNone .1.3.6.1.4.1.2272.1.8.24.3.1.3 |
rcIpMrouteHwSourcesAddressThe Source Address from where the stream of traffic is reaching the corresponding Group Address for which this
entry contains multicast routing information.ro IpAddress .1.3.6.1.4.1.2272.1.8.24.3.1.4 |
rcIpMrouteHwSourcesIngressPortThe Ingress vlan ports from where the traffic is coming,
for which this entry contains multicast routing
information.ro PortSet .1.3.6.1.4.1.2272.1.8.24.3.1.5 |
rcIpMrouteHwEgressVlansTableThe (conceptual) table containing egress vlan entries of
multicast routing information for the Group Address. SEQUENCE OF RcIpMrouteHwEgressVlansEntry .1.3.6.1.4.1.2272.1.8.24.4 |
rcIpMrouteHwEgressVlansEntryAn entry (conceptual row) containing egress vlan entries
of multicast routing information for a particular Group
Address. RcIpMrouteHwEgressVlansEntry .1.3.6.1.4.1.2272.1.8.24.4.1 |
rcIpMrouteHwEgressVlansGroupAddressThe IP multicast group address for which this entry
contains multicast routing information.ro IpAddress .1.3.6.1.4.1.2272.1.8.24.4.1.1 |
rcIpMrouteHwEgressVlansSubnetThe network address from where the source is sending the
stream of traffic for which this entry contains
multicast routing information.ro IpAddress .1.3.6.1.4.1.2272.1.8.24.4.1.2 |
rcIpMrouteHwEgressVlansInvlanThe Ingress vlan Id from where the traffic is coming for
which this entry contains multicast routing information.ro RcVlanIdOrNone .1.3.6.1.4.1.2272.1.8.24.4.1.3 |
rcIpMrouteHwEgressVlansIdThe Egress vlan Id from where the traffic is going out
for which this entry contains multicast routing
informationro RcVlanIdOrNone .1.3.6.1.4.1.2272.1.8.24.4.1.4 |
rcIpMrouteHwEgressVlansPortshe Egress vlan ports from where the traffic is going out
for which this entry contains multicast routing
information.ro PortSet .1.3.6.1.4.1.2272.1.8.24.4.1.5 |
rcIpMrouteHwEgressVlansIndexThis Index value keep tracks of the hardware record that
has been accessed for displaying the entry containing
multicast routing information.ro Integer32 .1.3.6.1.4.1.2272.1.8.24.4.1.6 |
rcIpResourceUsage OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.8.25 |
rcIpResourceUsageGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.8.25.1 |
rcIpResourceUsageGlobalIngressRecInUseUsed to get the Ingress Record Usage in the switch.
(S-G usage).ro INTEGER .1.3.6.1.4.1.2272.1.8.25.1.1 |
rcIpResourceUsageGlobalEgressRecInUseUsed to get the Egress Record Usage in the switch
(pepstream count).ro INTEGER .1.3.6.1.4.1.2272.1.8.25.1.2 |
rcIpResourceUsageGlobalIngressThresholdUsed to get the threshold count for Ingress records.rw INTEGER .1.3.6.1.4.1.2272.1.8.25.1.3 |
rcIpResourceUsageGlobalEgressThresholdUsed to get threshold count for egress records.rw INTEGER .1.3.6.1.4.1.2272.1.8.25.1.4 |
rcIpResourceUsageGlobalSendTrapAndLogA means of alerting the user. If this bool is set,
a message will be send to console and also a
duReport will be logged.rw EnableValue .1.3.6.1.4.1.2272.1.8.25.1.5 |
rcIpResourceUsageGlobalSendTrapOnlyA means of alerting the user. If this bool is set,
a message will be send to console.rw EnableValue .1.3.6.1.4.1.2272.1.8.25.1.6 |
rcIpResourceUsageGlobalLogMsgOnlyA means of alerting the user.If this bool is set,
a duReport will be logged.rw EnableValue .1.3.6.1.4.1.2272.1.8.25.1.7 |
rcIpRsmlt OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.8.26 |
rcIpRsmltGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.8.26.1 |
rcIpRsmltEdgeSupportEnableUsed to enable/disable RSMLT Edge Support featurerw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.26.1.2 |
rcIpRsmltOperTableRoute Smlt Table SEQUENCE OF RcIpRsmltOperEntry .1.3.6.1.4.1.2272.1.8.26.2 |
rcIpRsmltOperEntryAn entry of Ip As Path Access List Table. RcIpRsmltOperEntry .1.3.6.1.4.1.2272.1.8.26.2.1 |
rcIpRsmltOperIfIndexRoute Smlt Oper IfIndex.ro InterfaceIndex .1.3.6.1.4.1.2272.1.8.26.2.1.1 |
rcIpRsmltOperAdminStatusis a enable/disable flag.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.26.2.1.2 |
rcIpRsmltOperHoldDownTimerTimer value, the range of value is from 0 to 3600.rw INTEGER .1.3.6.1.4.1.2272.1.8.26.2.1.3 |
rcIpRsmltOperHoldDownTimeRemainingThe time value that indicate how much time
remaining of HoldDownTimer.ro INTEGER .1.3.6.1.4.1.2272.1.8.26.2.1.4 |
rcIpRsmltOperHoldUpTimerThe range of value 0 to 3600 or 9999. 9999 means
infinity.rw INTEGER (0..3600 | 9999) .1.3.6.1.4.1.2272.1.8.26.2.1.5 |
rcIpRsmltOperHoldUpTimeRemainingThe time value that indicate how much time
remaining of HoldUpTimer.ro INTEGER (0..3600 | 9999) .1.3.6.1.4.1.2272.1.8.26.2.1.6 |
rcIpRsmltOperIpAddrIP Interface with RSMLT on.ro IpAddress .1.3.6.1.4.1.2272.1.8.26.2.1.7 |
rcIpRsmltOperOperStatusThe operation status of Rsmlt, up or down.ro Enumeration .1.3.6.1.4.1.2272.1.8.26.2.1.8 |
rcIpRsmltOperSmltIdThe id range for SMLT is 1-32.ro IdList .1.3.6.1.4.1.2272.1.8.26.2.1.9 |
rcIpRsmltOperVlanIdVlan id.ro INTEGER .1.3.6.1.4.1.2272.1.8.26.2.1.11 |
rcIpRsmltOperMacAddrMac Address.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.26.2.1.12 |
rcIpRsmltOperRowStatusRow Status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.26.2.1.13 |
rcIpRsmltOperVrfIdIndicates the Virtual Router to which the RSMLT
Oper instance belongs.ro VrfIdentifier .1.3.6.1.4.1.2272.1.8.26.2.1.14 |
rcIpRsmltOperVrfNameName of the Virtual Router to which the RSMLT Oper
instance belongs.ro SnmpAdminString .1.3.6.1.4.1.2272.1.8.26.2.1.15 |
rcIpRsmltPeerTableRoute Smlt Table SEQUENCE OF RcIpRsmltPeerEntry .1.3.6.1.4.1.2272.1.8.26.3 |
rcIpRsmltPeerEntryAn entry of Ip As Path Access List Table. RcIpRsmltPeerEntry .1.3.6.1.4.1.2272.1.8.26.3.1 |
rcIpRsmltPeerIfIndexRoute Smlt Oper IfIndex.ro InterfaceIndex .1.3.6.1.4.1.2272.1.8.26.3.1.1 |
rcIpRsmltPeerAdminStatusis a enable/disable flag.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.26.3.1.2 |
rcIpRsmltPeerHoldDownTimerTimer value, the range of value is from 0 to 3600.ro INTEGER .1.3.6.1.4.1.2272.1.8.26.3.1.3 |
rcIpRsmltPeerHoldDownTimeRemainingThe time value that indicate how much time
remaining of HoldDownTimer.ro INTEGER .1.3.6.1.4.1.2272.1.8.26.3.1.4 |
rcIpRsmltPeerHoldUpTimerThe range of value 0 to 3600 or 9999. 9999 means
infinity.ro INTEGER (0..3600 | 9999) .1.3.6.1.4.1.2272.1.8.26.3.1.5 |
rcIpRsmltPeerHoldUpTimeRemainingThe time value that indicate how much time
remaining of HoldUpTimer.ro INTEGER (0..3600 | 9999) .1.3.6.1.4.1.2272.1.8.26.3.1.6 |
rcIpRsmltPeerIpAddrIP Interface with RSMLT on.ro IpAddress .1.3.6.1.4.1.2272.1.8.26.3.1.7 |
rcIpRsmltPeerOperStatusThe operation status of Rsmlt, up or down.ro Enumeration .1.3.6.1.4.1.2272.1.8.26.3.1.8 |
rcIpRsmltPeerSmltIdThe id range for SMLT is 1-32.ro IdList .1.3.6.1.4.1.2272.1.8.26.3.1.9 |
rcIpRsmltPeerVlanIdVlan id.ro INTEGER .1.3.6.1.4.1.2272.1.8.26.3.1.11 |
rcIpRsmltPeerMacAddrMac Address.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.26.3.1.12 |
rcIpRsmltPeerVrfIdIndicates the Virtual Router to which the RSMLT Peer
instance belongs.ro VrfIdentifier .1.3.6.1.4.1.2272.1.8.26.3.1.13 |
rcIpRsmltPeerVrfNameName of the Virtual Router to which the RSMLT Peer
instance belongs.ro SnmpAdminString .1.3.6.1.4.1.2272.1.8.26.3.1.14 |
rcIpRsmltEdgePeerTableRSMLT Edge Support Peer Info table. This
table consists of the RSMLT Peers for which
the switch will act as a PeerForwarder. SEQUENCE OF RcIpRsmltEdgePeerEntry .1.3.6.1.4.1.2272.1.8.26.4 |
rcIpRsmltEdgePeerEntryRSMLT Edge Support Peer Info Entry RcIpRsmltEdgePeerEntry .1.3.6.1.4.1.2272.1.8.26.4.1 |
rcIpRsmltEdgeVlanIdA value that uniquely identifies the Virtual LAN
associated with this entry. RcVlanIdOrNone .1.3.6.1.4.1.2272.1.8.26.4.1.1 |
rcIpRsmltEdgePeerIpAddressIP address of the Peer RSMLT Interface.ro IpAddress .1.3.6.1.4.1.2272.1.8.26.4.1.2 |
rcIpRsmltEdgePeerMacAddressThe MAC address of the Peer RSMLT interface.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.26.4.1.3 |
rcIpRsmltEdgePeerVrfIdIndicates the Virtual Router to which the RSMLT Edge Peer
instance belongs.ro VrfIdentifier .1.3.6.1.4.1.2272.1.8.26.4.1.4 |
rcIpRsmltEdgePeerVrfNameName of the Virtual Router to which the RSMLT Edge Peer
instance belongs.ro SnmpAdminString .1.3.6.1.4.1.2272.1.8.26.4.1.5 |
rcIpv6RsmltOperTableRoute Smlt Table SEQUENCE OF RcIpv6RsmltOperEntry .1.3.6.1.4.1.2272.1.8.26.5 |
rcIpv6RsmltOperEntryA local IPv6 RSMLT entry RcIpv6RsmltOperEntry .1.3.6.1.4.1.2272.1.8.26.5.1 |
rcIpv6RsmltOperIfIndexRoute Smlt Oper IfIndex. InterfaceIndex .1.3.6.1.4.1.2272.1.8.26.5.1.1 |
rcIpv6RsmltOperIpv6AddrIPv6 Interface with RSMLT on. Ipv6Address (IPV6-TC) .1.3.6.1.4.1.2272.1.8.26.5.1.2 |
rcIpv6RsmltOperIpv6PrefixLengthIPv6 Prefix Length. Integer32 .1.3.6.1.4.1.2272.1.8.26.5.1.3 |
rcIpv6RsmltOperAdminStatusis a enable/disable flag.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.26.5.1.4 |
rcIpv6RsmltOperHoldDownTimerTimer value, the range of value is from 0 to 3600.rw Integer32 .1.3.6.1.4.1.2272.1.8.26.5.1.5 |
rcIpv6RsmltOperHoldUpTimerThe range of value 0 to 3600 or 9999. 9999 means
infinity.rw Integer32 (0..3600 | 9999) .1.3.6.1.4.1.2272.1.8.26.5.1.7 |
rcIpv6RsmltOperOperStatusThe operation status of Rsmlt, up or down.ro Enumeration .1.3.6.1.4.1.2272.1.8.26.5.1.9 |
rcIpv6RsmltOperSmltIdThe id range for SMLT is 1-32.ro IdList .1.3.6.1.4.1.2272.1.8.26.5.1.10 |
rcIpv6RsmltOperVlanIdVlan id.ro Integer32 .1.3.6.1.4.1.2272.1.8.26.5.1.12 |
rcIpv6RsmltOperMacAddrMac Address.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.26.5.1.13 |
rcIpv6RsmltOperVrfIdIndicates the Virtual Router to which the RSMLT
Oper instance belongs.ro VrfIdentifier .1.3.6.1.4.1.2272.1.8.26.5.1.14 |
rcIpv6RsmltOperVrfNameName of the Virtual Router to which the RSMLT Oper
instance belongs.ro SnmpAdminString .1.3.6.1.4.1.2272.1.8.26.5.1.15 |
rcIpv6RsmltPeerTableRoute Smlt Peer Table SEQUENCE OF RcIpv6RsmltPeerEntry .1.3.6.1.4.1.2272.1.8.26.6 |
rcIpv6RsmltPeerEntryAn entry of Ip As Path Access List Table. RcIpv6RsmltPeerEntry .1.3.6.1.4.1.2272.1.8.26.6.1 |
rcIpv6RsmltPeerIfIndexRoute Smlt Oper IfIndex. InterfaceIndex .1.3.6.1.4.1.2272.1.8.26.6.1.1 |
rcIpv6RsmltPeerIpv6AddrIP Interface with RSMLT on. Ipv6Address (IPV6-TC) .1.3.6.1.4.1.2272.1.8.26.6.1.2 |
rcIpv6RsmltPeerIpv6PrefixLengthIPv6 Prefix Length Integer32 .1.3.6.1.4.1.2272.1.8.26.6.1.3 |
rcIpv6RsmltPeerAdminStatusis a enable/disable flag.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.26.6.1.4 |
rcIpv6RsmltPeerHoldDownTimerTimer value, the range of value is from 0 to 3600.ro Integer32 .1.3.6.1.4.1.2272.1.8.26.6.1.5 |
rcIpv6RsmltPeerHoldDownTimeRemainingThe time value that indicate how much time
remaining of HoldDownTimer.ro Integer32 .1.3.6.1.4.1.2272.1.8.26.6.1.6 |
rcIpv6RsmltPeerHoldUpTimerThe range of value 0 to 3600 or 9999. 9999 means
infinity.ro Integer32 (0..3600 | 9999) .1.3.6.1.4.1.2272.1.8.26.6.1.7 |
rcIpv6RsmltPeerHoldUpTimeRemainingThe time value that indicate how much time
remaining of HoldUpTimer.ro Integer32 (0..3600 | 9999) .1.3.6.1.4.1.2272.1.8.26.6.1.8 |
rcIpv6RsmltPeerOperStatusThe operation status of Rsmlt, up or down.ro Enumeration .1.3.6.1.4.1.2272.1.8.26.6.1.9 |
rcIpv6RsmltPeerSmltIdThe id range for SMLT is 1-32.ro IdList .1.3.6.1.4.1.2272.1.8.26.6.1.10 |
rcIpv6RsmltPeerVlanIdVlan id.ro Integer32 .1.3.6.1.4.1.2272.1.8.26.6.1.12 |
rcIpv6RsmltPeerMacAddrMac Address.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.26.6.1.13 |
rcIpv6RsmltPeerVrfIdIndicates the Virtual Router to which the RSMLT Peer
instance belongs.ro VrfIdentifier .1.3.6.1.4.1.2272.1.8.26.6.1.14 |
rcIpv6RsmltPeerVrfNameName of the Virtual Router to which the RSMLT Peer
instance belongs.ro SnmpAdminString .1.3.6.1.4.1.2272.1.8.26.6.1.15 |
rcIpv6RsmltEdgePeerTableRSMLT Edge Support Peer Info table. This
table consists of the RSMLT Peers for which
the switch will act as a PeerForwarder. SEQUENCE OF RcIpv6RsmltEdgePeerEntry .1.3.6.1.4.1.2272.1.8.26.7 |
rcIpv6RsmltEdgePeerEntryRSMLT Edge Support Peer Info Entry RcIpv6RsmltEdgePeerEntry .1.3.6.1.4.1.2272.1.8.26.7.1 |
rcIpv6RsmltEdgePeerVlanIdA value that uniquely identifies the Virtual LAN
associated with this entry. Integer32 .1.3.6.1.4.1.2272.1.8.26.7.1.1 |
rcIpv6RsmltEdgePeerIpv6AddressIP address of the Peer RSMLT Interface. Ipv6Address (IPV6-TC) .1.3.6.1.4.1.2272.1.8.26.7.1.2 |
rcIpv6RsmltEdgePeerIpv6PrefixLengthIf set then this prefix can be used
for address autoconfig,
passed opaquely to Infinity Integer32 .1.3.6.1.4.1.2272.1.8.26.7.1.3 |
rcIpv6RsmltEdgePeerMacAddressThe MAC address of the Peer RSMLT interface.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.26.7.1.4 |
rcIpDhcpOp82StatsTableDHCP statistics table for Relay Agent Information Option SEQUENCE OF RcIpDhcpOp82StatsEntry .1.3.6.1.4.1.2272.1.8.29 |
rcIpDhcpOp82StatsEntryUsed to see current statistics on interfaces that have
DHCP Option 82 (Relay Agent Information) enabled.
This table is read-only. RcIpDhcpOp82StatsEntry .1.3.6.1.4.1.2272.1.8.29.1 |
rcIpDhcpOp82StatsIfIndexInterface number. The number can represent either
a physical or logical(VLAN) interface. InterfaceIndexOrZero .1.3.6.1.4.1.2272.1.8.29.1.1 |
rcIpDhcpOp82StatsFoundOp82Represents the number of packets received on the interface
that already had Dhcp Option 82 inserted in themro Counter32 .1.3.6.1.4.1.2272.1.8.29.1.2 |
rcIpDhcpOp82StatsDroppedRepresents the number of packets dropped because of reasons related
to Dhcp Option 82. These reasons could be that the packet was received
from an untrusted source or spoofing was detected.ro Counter32 .1.3.6.1.4.1.2272.1.8.29.1.3 |
rcIpDhcpOp82StatsCircuitIdRepresents the value of CircuitId inserted in the packets.
This is the Port number of the Dhcp Relay.ro INTEGER .1.3.6.1.4.1.2272.1.8.29.1.4 |
rcIpDhcpOp82StatsAddedCircuitIdRepresents the number of packets which had CircuitId inserted on this interfacero Counter32 .1.3.6.1.4.1.2272.1.8.29.1.5 |
rcIpDhcpOp82StatsRemovedCircuitIdRepresents the number of packets which had CircuitId removed on this interfacero Counter32 .1.3.6.1.4.1.2272.1.8.29.1.6 |
rcIpDhcpOp82StatsRemoteIdRepresents the value of RemoteId inserted in the packets.
This is the Mac address of the Dhcp Relay.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.29.1.7 |
rcIpDhcpOp82StatsAddedRemoteIdRepresents the number of packets which had RemoteId inserted on this interfacero Counter32 .1.3.6.1.4.1.2272.1.8.29.1.8 |
rcIpDhcpOp82StatsRemovedRemoteIdRepresents the number of packets which had RemoteId removed on this interfacero Counter32 .1.3.6.1.4.1.2272.1.8.29.1.9 |
rcIpDhcpOp82StatsAgentAddrThe IP address configured as relay on this interface; it is either the IP of the
physical interface or the IP of the VRRP addressro IpAddress .1.3.6.1.4.1.2272.1.8.29.1.10 |
rcIpGenPolicy OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.8.100 |
rcIpAsPathAccessListTableSizetable sizero Integer32 .1.3.6.1.4.1.2272.1.8.100.1 |
rcIpAsPathAccessListTableIP As Path Access List table SEQUENCE OF RcIpAsPathAccessListEntry .1.3.6.1.4.1.2272.1.8.100.2 |
rcIpAsPathAccessListEntryAn entry of Ip As Path Access List Table. RcIpAsPathAccessListEntry .1.3.6.1.4.1.2272.1.8.100.2.1 |
rcIpAsPathAccessListIdPath Access List entry Id.ro INTEGER .1.3.6.1.4.1.2272.1.8.100.2.1.1 |
rcIpAsPathAccessListMemberIdfrq. at which hello sent.ro INTEGER .1.3.6.1.4.1.2272.1.8.100.2.1.2 |
rcIpAsPathAccessListModePath Access List Mode, permit or deny.rw Enumeration .1.3.6.1.4.1.2272.1.8.100.2.1.3 |
rcIpAsPathAccessListAsRegularExpressionIP Path Access List Regular Expressionrw OCTET STRING .1.3.6.1.4.1.2272.1.8.100.2.1.4 |
rcIpAsPathAccessListRowStatusTable row status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.100.2.1.5 |
rcIpCommunityAccessListTableSizetable sizero Integer32 .1.3.6.1.4.1.2272.1.8.100.3 |
rcIpCommunityAccessListTableIP CommunityAccess List table SEQUENCE OF RcIpCommunityAccessListEntry .1.3.6.1.4.1.2272.1.8.100.4 |
rcIpCommunityAccessListEntryAn entry of Ip CommunityAccess List Table. RcIpCommunityAccessListEntry .1.3.6.1.4.1.2272.1.8.100.4.1 |
rcIpCommunityAccessListIdIP CommunityAccess entry List Idro INTEGER .1.3.6.1.4.1.2272.1.8.100.4.1.1 |
rcIpCommunityAccessListMemberIdfrq. at which hello sent.ro INTEGER .1.3.6.1.4.1.2272.1.8.100.4.1.2 |
rcIpCommunityAccessListModeIP Community Access List Mode, permit or deny.rw Enumeration .1.3.6.1.4.1.2272.1.8.100.4.1.3 |
rcIpCommunityAccessListCommunityIP Community Access List Community string.rw OCTET STRING .1.3.6.1.4.1.2272.1.8.100.4.1.4 |
rcIpCommunityAccessListRowStatusIP Community Access Table Row Status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.100.4.1.5 |
rcIpAccessListTableSizetable sizero Integer32 .1.3.6.1.4.1.2272.1.8.100.5 |
rcIpAccessListTableIP Access List table SEQUENCE OF RcIpAccessListEntry .1.3.6.1.4.1.2272.1.8.100.6 |
rcIpAccessListEntryAn entry of Ip Access List Table. RcIpAccessListEntry .1.3.6.1.4.1.2272.1.8.100.6.1 |
rcIpAccessListIdro INTEGER .1.3.6.1.4.1.2272.1.8.100.6.1.1 |
rcIpAccessListModero Enumeration .1.3.6.1.4.1.2272.1.8.100.6.1.2 |
rcIpAccessListNetworkrw IpAddress .1.3.6.1.4.1.2272.1.8.100.6.1.3 |
rcIpAccessListNetworkMaskrw IpAddress .1.3.6.1.4.1.2272.1.8.100.6.1.4 |
rcIpAccessListNamerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.100.6.1.5 |
rcIpAccessListRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.100.6.1.6 |
rcIpExtendedAccessListTableSizetable sizero Integer32 .1.3.6.1.4.1.2272.1.8.100.7 |
rcIpExtendedAccessListTableIP Extended Access List table SEQUENCE OF RcIpExtendedAccessListEntry .1.3.6.1.4.1.2272.1.8.100.8 |
rcIpExtendedAccessListEntryAn entry of Ip Extended Access List Table. RcIpExtendedAccessListEntry .1.3.6.1.4.1.2272.1.8.100.8.1 |
rcIpExtendedAccessListIdro INTEGER .1.3.6.1.4.1.2272.1.8.100.8.1.1 |
rcIpExtendedAccessListModero Enumeration .1.3.6.1.4.1.2272.1.8.100.8.1.2 |
rcIpExtendedAccessListNetworkro IpAddress .1.3.6.1.4.1.2272.1.8.100.8.1.3 |
rcIpExtendedAccessListNetworkWildCardro IpAddress .1.3.6.1.4.1.2272.1.8.100.8.1.4 |
rcIpExtendedAccessListNetworkMaskro IpAddress .1.3.6.1.4.1.2272.1.8.100.8.1.5 |
rcIpExtendedAccessListNetworkMaskWildCardro IpAddress .1.3.6.1.4.1.2272.1.8.100.8.1.6 |
rcIpExtendedAccessListNamerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.100.8.1.7 |
rcIpExtendedAccessListRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.100.8.1.8 |
rcIpPrefixListTableSizetable sizero Integer32 .1.3.6.1.4.1.2272.1.8.100.9 |
rcIpPrefixListTableIP Prefix List table SEQUENCE OF RcIpPrefixListEntry .1.3.6.1.4.1.2272.1.8.100.10 |
rcIpPrefixListEntryAn entry of Ip Prefix List Table. RcIpPrefixListEntry .1.3.6.1.4.1.2272.1.8.100.10.1 |
rcIpPrefixListIdListIdro Integer32 .1.3.6.1.4.1.2272.1.8.100.10.1.1 |
rcIpPrefixListPrefixIs a member of a specific prefix list.
Adding the prefix to the given prefix listro IpAddress .1.3.6.1.4.1.2272.1.8.100.10.1.2 |
rcIpPrefixListPrefixMaskLenprefix mask lengthro INTEGER .1.3.6.1.4.1.2272.1.8.100.10.1.3 |
rcIpPrefixListMaskLenFromused with mask lenrw INTEGER .1.3.6.1.4.1.2272.1.8.100.10.1.4 |
rcIpPrefixListMaskLenUptoused with mask lenrw INTEGER .1.3.6.1.4.1.2272.1.8.100.10.1.5 |
rcIpPrefixListNamelist namerw DisplayString .1.3.6.1.4.1.2272.1.8.100.10.1.6 |
rcIpPrefixListRowStatusrow statusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.100.10.1.7 |
rcIpRoutePolicyTableSizetable sizero Integer32 .1.3.6.1.4.1.2272.1.8.100.11 |
rcIpRoutePolicyApplyrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.100.12 |
rcIpRoutePolicyTableIP Route Map table SEQUENCE OF RcIpRoutePolicyEntry .1.3.6.1.4.1.2272.1.8.100.13 |
rcIpRoutePolicyEntryAn entry of Ip Route Map Table. RcIpRoutePolicyEntry .1.3.6.1.4.1.2272.1.8.100.13.1 |
rcIpRoutePolicyIdIndex used to identify a group of policies in
the route policy tableRoute map idro Integer32 .1.3.6.1.4.1.2272.1.8.100.13.1.1 |
rcIpRoutePolicySequenceNumbersecond index used to identify a specific policy
with in the route policy group (grouped by Id).
This field allows users to specify different
MATCH, SET parameters and an action.ro Integer32 .1.3.6.1.4.1.2272.1.8.100.13.1.2 |
rcIpRoutePolicyNameIs used to group a set of policies with different
sequence number. Id & Name have one-on-one
relationship. Different policy groups can
contain same sequence number, whereas with in
a group the sequence number must be different.rw DisplayString .1.3.6.1.4.1.2272.1.8.100.13.1.3 |
rcIpRoutePolicyEnableValue specified here indicate whether
this policy is enabled or not. If
disabled policy sould not be used.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.100.13.1.4 |
rcIpRoutePolicyModespecifies the action to be taken when this
policy is selected for a specific route.
This can be permit or deny or continue.
Permit indicates allow the route, deny indicates
ignore the route. Continue means continue
checking the next match criteria set in the
next policy seq, if none take the default action
in the given context.rw Enumeration .1.3.6.1.4.1.2272.1.8.100.13.1.5 |
rcIpRoutePolicyMatchProtocolMatch protocol. Used for RIP and DVMRP announce
policy only.
Value is one of multiple (logical 'OR)
of the following values:
direct(1),
static(2),
rip(4),
ospf(8),
ebgp(16),
dvmrp(32),
ibgp(64),
isis(128),
any(255)
direct(1): enables direct match-protocol
static(2): enables static match-protocol
rip(4): enables rip match-protocol
ospf(8): enables ospf match-protocol
ebgp(16): enables ebgp match-protocol
dvmrp(32): enables dvmrp match-protocol
ibgp(64): enables ibgp match-protocol
isis(128): enables isis match-protocol
any(255): enables all match-protocolsrw INTEGER .1.3.6.1.4.1.2272.1.8.100.13.1.6 |
rcIpRoutePolicyMatchAsPathApplicable to BGP protocol only. Match the BGP
autonomous system path. This will override the
BGP neighbor filter list info.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.100.13.1.7 |
rcIpRoutePolicyMatchCommunityApplicable to BGP protocol only. Filter
incoming/outgoing updates based on communities.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.100.13.1.8 |
rcIpRoutePolicyMatchCommunityExactIf enabled indicates the match has be an exact
(i.e., all of the communities specified in the
path has to be matched).rw EnableValue .1.3.6.1.4.1.2272.1.8.100.13.1.9 |
rcIpRoutePolicyMatchNetworkcan specify one or more prefix list name or id(s)rw RcLongDisplayString .1.3.6.1.4.1.2272.1.8.100.13.1.10 |
rcIpRoutePolicyMatchIpRouteSourceIn case of Rip routes this is equivalent to
RipInterface. In case of DVMRP routes this is
equivalent to DVMRP gateway. Can specify one
or more prefix list name(s) or id(s) seperated by comma.rw RcLongDisplayString .1.3.6.1.4.1.2272.1.8.100.13.1.11 |
rcIpRoutePolicyMatchNextHopIn case of Rip routes this is equivalent to
RipInterface. In case of DVMRP routes this is
equivalent to DVMRP gateway. Can specify one
or more prefix list name(s) or id(s) seperated by comma.rw RcLongDisplayString .1.3.6.1.4.1.2272.1.8.100.13.1.12 |
rcIpRoutePolicyMatchInterfaceMatch received interface. Only for rip routes.
Ignored in all other cases.rw RcLongDisplayString .1.3.6.1.4.1.2272.1.8.100.13.1.13 |
rcIpRoutePolicyMatchRouteTypeFor BGP this choice refers to locally generated
routes external routes learned via ebgp nbr. For
OSPF internal refers to intra and inter area
routes (belongs to local autonomous system).
External (type1|type2) refers to the routes
learned from other ASs and imported as either
type1 or type2. if type1/type2 is specified
then match only type1/type2.rw Enumeration .1.3.6.1.4.1.2272.1.8.100.13.1.14 |
rcIpRoutePolicyMatchMetricMatch mec field in the incoming advertisement.rw INTEGER .1.3.6.1.4.1.2272.1.8.100.13.1.15 |
rcIpRoutePolicyMatchTagspecifies a list of tag(s), that will be used
during the match criteria process.contains one
or more tag values..rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.100.13.1.16 |
rcIpRoutePolicySetRoutePreferenceif non-zero specifies the route preference
value to be assigned to the routes that applies
this policy.contains one or more tag values..rw INTEGER .1.3.6.1.4.1.2272.1.8.100.13.1.17 |
rcIpRoutePolicySetAsPathThe AS path vaule to be used whether the
SetAsPathMode is Tag or Prepend.as-path string..rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.100.13.1.18 |
rcIpRoutePolicySetAsPathModeIt can be either tag or prepend tag.
applicable only while redistributing routes to
BGP.Converts the tag of a route into AS path.rw Enumeration .1.3.6.1.4.1.2272.1.8.100.13.1.19 |
rcIpRoutePolicySetAutomaticTagrw EnableValue .1.3.6.1.4.1.2272.1.8.100.13.1.20 |
rcIpRoutePolicySetCommunityNumberthis value can be a number (1..42949672000)
or no-export or no-advertise. Applicable to
BGP advertisments.community number.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.100.13.1.21 |
rcIpRoutePolicySetCommunityModethis value can be either append or none
unchanged - keep the community attribute in the
route path as it is.
none - remove the community in the route path
additive - adds the community-number specified
in SetCommunityNumber to the
community list attribute. Applicable
to BGP advertisments.rw Enumeration .1.3.6.1.4.1.2272.1.8.100.13.1.22 |
rcIpRoutePolicySetMetricTypeInternalIndicates to set the MED value for routes
advertised to ebgp nbrs to the IGP metric value.rw Integer32 .1.3.6.1.4.1.2272.1.8.100.13.1.23 |
rcIpRoutePolicySetMetricValue of the metric to be used while sending an
update for the routes that match the matching
criteria in this route policy.
Default - 0 indicates the internal value defined
for protocolrw INTEGER .1.3.6.1.4.1.2272.1.8.100.13.1.24 |
rcIpRoutePolicySetMetricTypeMetric type for the routes to be imported into
OSPF routing protocol, which passed the matching
criteria configured in this route policy.rw Enumeration .1.3.6.1.4.1.2272.1.8.100.13.1.25 |
rcIpRoutePolicySetNextHopIpAddress of the next hop router. Ignored for
DVMRP routes.rw IpAddress .1.3.6.1.4.1.2272.1.8.100.13.1.26 |
rcIpRoutePolicySetOriginigp/egp/incomplete Applicable to BGP protocol
only. If not set uses the route origin from
the Ip routing table (protocol).rw Enumeration .1.3.6.1.4.1.2272.1.8.100.13.1.27 |
rcIpRoutePolicySetLocalPrefthis value will be used during route decision
process in the BGP protocol. Applicable to BGP
only.rw Integer32 .1.3.6.1.4.1.2272.1.8.100.13.1.28 |
rcIpRoutePolicySetOriginEgpAsindicates the Remote autonomous sys number.
Applicable to BGP only.rw Integer32 .1.3.6.1.4.1.2272.1.8.100.13.1.29 |
rcIpRoutePolicySetTagValue to be used for setting tag of the
destination routing protocol. If not specified
forward the tag value in the source routing
protocol. Value 0 indicates not setrw Integer32 .1.3.6.1.4.1.2272.1.8.100.13.1.30 |
rcIpRoutePolicySetWeightShould be using with match as-path condition.
Weight value for the routing table. For BGP
this value will override the weight configured
through NetworkTableEntry or FilterListWeight or
NeighborWeight. Used for BGP only.Value 0
indicates not setrw Integer32 .1.3.6.1.4.1.2272.1.8.100.13.1.31 |
rcIpRoutePolicySetInjectNetListspecifies the prefix list to be used either
for injecting the routes into the routing
table or to include the networks in the
advertisement. Ignored for DVMRP.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.100.13.1.32 |
rcIpRoutePolicyRowStatusrow statusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.100.13.1.33 |
rcIpRoutePolicySetMaskSet Mask Ip Addressrw IpAddress .1.3.6.1.4.1.2272.1.8.100.13.1.34 |
rcIpRoutePolicyNssaPbitSet/Reset P bit in specified type 7 LSA.
By default P bit is always set in case user
set it to disable state for particular route
policy than all type 7 LSAs associated with
that route policy will have P bit cleared,
with this intact NSSA ABR will not perform
translation of these LSAs to type 5.rw EnableValue .1.3.6.1.4.1.2272.1.8.100.13.1.35 |
rcIpRoutePolicyMatchVrfAn array used to identify which source VRFs have leaked
routes to the local VRFrw IdList .1.3.6.1.4.1.2272.1.8.100.13.1.36 |
rcIpRoutePolicyMatchExtCommunityFilter incoming/outgoing updates based on communitiesrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.100.13.1.37 |
rcIpRoutePolicySetExtCommunitySet Extended-community string.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.100.13.1.38 |
rcIpRoutePolicySetExtCommunityModeThis value can be either additive, unchanged or overwrite.rw Enumeration .1.3.6.1.4.1.2272.1.8.100.13.1.39 |
rcIpRoutePolicyMatchLocalPrefMatch Local Prefix value.rw Integer32 .1.3.6.1.4.1.2272.1.8.100.13.1.40 |
rcIpRoutePolicyMatchIpRouteDestto match route destination, one can specify one
or more prefix list name(s) or id(s) separated by comma.rw RcLongDisplayString .1.3.6.1.4.1.2272.1.8.100.13.1.41 |
rcIpRoutePolicySetLevelLevel of the Ip routing policyrw Enumeration .1.3.6.1.4.1.2272.1.8.100.13.1.42 |
rcIpRoutePolicyIpv6SetNextHopAddress of the ipv6 next hop router. Ignored for
DVMRP routes.rw Ipv6Address (IPV6-TC) .1.3.6.1.4.1.2272.1.8.100.13.1.43 |
rcIpRedistributeTableSizetable sizero Integer32 .1.3.6.1.4.1.2272.1.8.100.14 |
rcIpRedistributeApplyrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.100.15 |
rcIpRedistributeTableIP Redistribute table SEQUENCE OF RcIpRedistributeEntry .1.3.6.1.4.1.2272.1.8.100.16 |
rcIpRedistributeEntryAn entry of Ip Redistribute Table. RcIpRedistributeEntry .1.3.6.1.4.1.2272.1.8.100.16.1 |
rcIpRedistributeProtocolProtocol is any one of the dynamic routing
protocol, which is interested in receiving
the external routing info.ro Enumeration .1.3.6.1.4.1.2272.1.8.100.16.1.1 |
rcIpRedistributeRouteSourceequivalent to the owner field in the routing
table. This field indicates that the protocol
is interested in knowing/not-knowing the routes
learned from this source.ro Enumeration .1.3.6.1.4.1.2272.1.8.100.16.1.2 |
rcIpRedistributeEnableEnable/Disable. By default this is enabled.rw EnableValue .1.3.6.1.4.1.2272.1.8.100.16.1.3 |
rcIpRedistributeMetricvalue of the metric to be announced in the
advertismentrw INTEGER .1.3.6.1.4.1.2272.1.8.100.16.1.4 |
rcIpRedistributeMetricTypespecifies the type of the metric type, useful
for OSPF and BGP only.rw Enumeration .1.3.6.1.4.1.2272.1.8.100.16.1.5 |
rcIpRedistributeMatchRouteTypeused to filter a route based on the route type.
applicable to BGP.rw Enumeration .1.3.6.1.4.1.2272.1.8.100.16.1.6 |
rcIpRedistributeSetTagTag value to be set in the advertisment.rw Integer32 .1.3.6.1.4.1.2272.1.8.100.16.1.7 |
rcIpRedistributeSubnetsapplicable to OSPF only. Indicates that all the
subnets need to be advertised individually.rw Enumeration .1.3.6.1.4.1.2272.1.8.100.16.1.8 |
rcIpRedistributeRoutePolicyspecify the route policy to achieve the final
granularity in filtering to determine whether
or not a specific route should be advertised
to the given protocol.Route map namerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.100.16.1.9 |
rcIpRedistributeASNumberAutonomous system number. Used only for the
BGP protocol.rw Integer32 .1.3.6.1.4.1.2272.1.8.100.16.1.10 |
rcIpRedistributeWeightused only for the BGP protocol.rw Integer32 .1.3.6.1.4.1.2272.1.8.100.16.1.11 |
rcIpRedistributeDefaultOriginateindicates the given protocol will
originate/advertise a default route.rw Integer32 .1.3.6.1.4.1.2272.1.8.100.16.1.12 |
rcIpRedistributeRowStatusrow statusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.100.16.1.13 |
rcIpOspfInFilterTableSizetable sizero Integer32 .1.3.6.1.4.1.2272.1.8.100.17 |
rcIpOspfInFilterApplyrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.100.18 |
rcIpOspfInFilterTableIP Ospf In Filter table SEQUENCE OF RcIpOspfInFilterEntry .1.3.6.1.4.1.2272.1.8.100.19 |
rcIpOspfInFilterEntryAn entry of Ip Ospf In Filter Table. RcIpOspfInFilterEntry .1.3.6.1.4.1.2272.1.8.100.19.1 |
rcIpOspfInFilterAdvertisingRtrro IpAddress .1.3.6.1.4.1.2272.1.8.100.19.1.1 |
rcIpOspfInFilterEnableIfIndexrw EnableValue .1.3.6.1.4.1.2272.1.8.100.19.1.2 |
rcIpOspfInFilterMetricTyperw Enumeration .1.3.6.1.4.1.2272.1.8.100.19.1.3 |
rcIpOspfInFilterPolicyNamerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.100.19.1.4 |
rcIpOspfInFilterRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.100.19.1.5 |
rcIpRoutePrefTableSizetable sizero Integer32 .1.3.6.1.4.1.2272.1.8.100.20 |
rcIpRoutePrefTableIP Route Pref table SEQUENCE OF RcIpRoutePrefEntry .1.3.6.1.4.1.2272.1.8.100.21 |
rcIpRoutePrefEntryAn entry of Ip Route Pref Table. RcIpRoutePrefEntry .1.3.6.1.4.1.2272.1.8.100.21.1 |
rcIpRoutePrefProtocolProtocolro Enumeration .1.3.6.1.4.1.2272.1.8.100.21.1.1 |
rcIpRoutePrefDefaultShows the default preference value for the given
protocol.ro INTEGER .1.3.6.1.4.1.2272.1.8.100.21.1.2 |
rcIpRoutePrefConfiguredThis value is configurable by the userrw INTEGER .1.3.6.1.4.1.2272.1.8.100.21.1.3 |
rcIpRedistributeInterVrfTableIP Redistribute table for Inter-VRFs SEQUENCE OF RcIpRedistributeInterVrfEntry .1.3.6.1.4.1.2272.1.8.100.22 |
rcIpRedistributeInterVrfEntryAn entry of Ip Redistribute Table.(new) RcIpRedistributeInterVrfEntry .1.3.6.1.4.1.2272.1.8.100.22.1 |
rcIpRedistributeInterVrfDstVrfIddst VRF id used in the redistribution VrfIdentifier .1.3.6.1.4.1.2272.1.8.100.22.1.1 |
rcIpRedistributeInterVrfProtocolProtocol is any one of the dynamic routing
protocol, which is interested in receiving
the external routing info. Enumeration .1.3.6.1.4.1.2272.1.8.100.22.1.2 |
rcIpRedistributeInterVrfSrcVrfIdsrc VRF id used in the redistribution VrfIdentifier .1.3.6.1.4.1.2272.1.8.100.22.1.3 |
rcIpRedistributeInterVrfRouteSourceequivalent to the owner field in the routing
table. This field indicates that the protocol
is interested in knowing/not-knowing the routes
learned from this source. Enumeration .1.3.6.1.4.1.2272.1.8.100.22.1.4 |
rcIpRedistributeInterVrfEnableEnable/Disable. By default this is enabled.rw EnableValue .1.3.6.1.4.1.2272.1.8.100.22.1.5 |
rcIpRedistributeInterVrfMetricvalue of the metric to be announced in the
advertismentrw INTEGER .1.3.6.1.4.1.2272.1.8.100.22.1.6 |
rcIpRedistributeInterVrfMetricTypespecifies the type of the metric type, useful
for OSPF and BGP only.rw Enumeration .1.3.6.1.4.1.2272.1.8.100.22.1.7 |
rcIpRedistributeInterVrfMatchRouteTypeused to filter a route based on the route type.
applicable to BGP.rw Enumeration .1.3.6.1.4.1.2272.1.8.100.22.1.8 |
rcIpRedistributeInterVrfSetTagTag value to be set in the advertisment.rw Integer32 .1.3.6.1.4.1.2272.1.8.100.22.1.9 |
rcIpRedistributeInterVrfSubnetsapplicable to OSPF only. Indicates that all the
subnets need to be advertised individually.rw Enumeration .1.3.6.1.4.1.2272.1.8.100.22.1.10 |
rcIpRedistributeInterVrfRoutePolicyspecify the route policy to achieve the final
granularity in filtering to determine whether
or not a specific route should be advertised
to the given protocol.Route map namerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.100.22.1.11 |
rcIpRedistributeInterVrfASNumberAutonomous system number. Used only for the
BGP protocol.rw Integer32 .1.3.6.1.4.1.2272.1.8.100.22.1.12 |
rcIpRedistributeInterVrfWeightused only for the BGP protocol.rw Integer32 .1.3.6.1.4.1.2272.1.8.100.22.1.13 |
rcIpRedistributeInterVrfDefaultOriginateindicates the given protocol will
originate/advertise a default route.rw Integer32 .1.3.6.1.4.1.2272.1.8.100.22.1.14 |
rcIpRedistributeInterVrfRowStatusrow statusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.100.22.1.15 |
rcIpExtCommunityAccessListTableSizeIP Extended Community Access List table size.ro Integer32 .1.3.6.1.4.1.2272.1.8.100.23 |
rcIpExtCommunityAccessListTableIP Extended Community Access List table. SEQUENCE OF RcIpExtCommunityAccessListEntry .1.3.6.1.4.1.2272.1.8.100.24 |
rcIpExtCommunityAccessListEntryAn entry of Ip Extended Community Access List Table. RcIpExtCommunityAccessListEntry .1.3.6.1.4.1.2272.1.8.100.24.1 |
rcIpExtCommunityAccessListIdIP extended Community Access List Id INTEGER .1.3.6.1.4.1.2272.1.8.100.24.1.1 |
rcIpExtCommunityAccessListMemberIdMember Id for the extended-community list to be added INTEGER .1.3.6.1.4.1.2272.1.8.100.24.1.2 |
rcIpExtCommunityAccessListRTTypeThe route target Type for IP Extended Community rule in the listro Enumeration .1.3.6.1.4.1.2272.1.8.100.24.1.3 |
rcIpExtCommunityAccessListRTAddressExtended community Ip address for the route-target type entry.rw IpAddress .1.3.6.1.4.1.2272.1.8.100.24.1.4 |
rcIpExtCommunityAccessListRTAsNumberExtended community Asnumber for the route-target type entry.rw INTEGER .1.3.6.1.4.1.2272.1.8.100.24.1.5 |
rcIpExtCommunityAccessListRTAssignedNumExtended community assigned number for the route-target type entry.rw Unsigned32 .1.3.6.1.4.1.2272.1.8.100.24.1.6 |
rcIpExtCommunityAccessListSooTypeThe site of origin Type for IP Extended Community Access Listro Enumeration .1.3.6.1.4.1.2272.1.8.100.24.1.7 |
rcIpExtCommunityAccessListSooAddressExtended community Ip address for the site-of-origin type of entry.rw IpAddress .1.3.6.1.4.1.2272.1.8.100.24.1.8 |
rcIpExtCommunityAccessListSooAsNumberExtended community AsNumber for the site-of-origin type of entry.rw INTEGER .1.3.6.1.4.1.2272.1.8.100.24.1.9 |
rcIpExtCommunityAccessListSooAssignedNumExtended community assigned number for the site-of-origin type of entry.rw Unsigned32 .1.3.6.1.4.1.2272.1.8.100.24.1.10 |
rcIpExtCommunityAccessListVrfIdVrfId for the extended-community Access list.rw VrfIdentifier .1.3.6.1.4.1.2272.1.8.100.24.1.11 |
rcIpExtCommunityAccessListRowStatusIP Ext Community Table Row Status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.100.24.1.12 |
rcIpPrefixListNameTableSizetable sizero Integer32 .1.3.6.1.4.1.2272.1.8.100.26 |
rcIpPrefixListNameTablePrefix List Name table SEQUENCE OF RcIpPrefixListNameEntry .1.3.6.1.4.1.2272.1.8.100.27 |
rcIpPrefixListNameEntryAn entry of Prefix List Name Table. RcIpPrefixListNameEntry .1.3.6.1.4.1.2272.1.8.100.27.1 |
rcIpPrefixListNameIdlist id Integer32 .1.3.6.1.4.1.2272.1.8.100.27.1.1 |
rcIpPrefixListNameNamelist namero DisplayString .1.3.6.1.4.1.2272.1.8.100.27.1.2 |
rcIpRoutePolicyNameTableRoute Policy Name table for all VRFs SEQUENCE OF RcIpRoutePolicyNameEntry .1.3.6.1.4.1.2272.1.8.100.28 |
rcIpRoutePolicyNameEntryAn entry of Route Policy Name Table. RcIpRoutePolicyNameEntry .1.3.6.1.4.1.2272.1.8.100.28.1 |
rcIpRoutePolicyNameVrfIdroute policy vrfId VrfIdentifier .1.3.6.1.4.1.2272.1.8.100.28.1.1 |
rcIpRoutePolicyNameIdroute policy id Integer32 .1.3.6.1.4.1.2272.1.8.100.28.1.2 |
rcIpRoutePolicyNameNameroute policy namero DisplayString .1.3.6.1.4.1.2272.1.8.100.28.1.3 |
rcIpBgp OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.8.101 |
rcIpBgpGeneralGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.8.101.1 |
rcIpBgpGeneralGroupLocalAsLocal Autonomous system numberrw Integer32 .1.3.6.1.4.1.2272.1.8.101.1.1 |
rcIpBgpGeneralGroupAdminStatusDisable or Enable group administrativerw EnableValue .1.3.6.1.4.1.2272.1.8.101.1.2 |
rcIpBgpGeneralGroupDefaultMetricThe default-metric is used in conjunction with
the redistribute router configuration command to cause
the bgp routing protocol to use this metric as MEDrw Integer32 (-1..2147483647) .1.3.6.1.4.1.2272.1.8.101.1.3 |
rcIpBgpGeneralGroupDefaultLocalPreferenceDefault local preference attribute value to be usedrw Integer32 .1.3.6.1.4.1.2272.1.8.101.1.4 |
rcIpBgpGeneralGroupDefaultInformationOriginateallows the redistribution of network 0.0.0.0 into BGPrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.101.1.5 |
rcIpBgpGeneralGroupBestPathMissingAsWorstEnable to consider a missing MED attribute in a path
as having a value of infinity, making the path without a
MED value the least desirable path. To return the router
to the default (assign a value of 0 to the missing MED),
set the value to disable.rw EnableValue .1.3.6.1.4.1.2272.1.8.101.1.6 |
rcIpBgpGeneralGroupBestPathMedConfedTo enable MED comparison among paths learned from
confederation peers. Disable to prevent considering
the MED attribute in comparing pathsrw EnableValue .1.3.6.1.4.1.2272.1.8.101.1.7 |
rcIpBgpGeneralGroupIgnoreIllegalRouterIdConfigures BGP to overlook an illegal router ID.
Enables or disable accepting a connection from a peer
that sends its open message with a router ID of 0.rw EnableValue .1.3.6.1.4.1.2272.1.8.101.1.8 |
rcIpBgpGeneralGroupAlwaysCompareMedEnable to allow the comparison of the Multi Exit
Discriminator (MED) for paths from neighbors in
different autonomous systems.rw EnableValue .1.3.6.1.4.1.2272.1.8.101.1.9 |
rcIpBgpGeneralGroupAutoPeerRestartEnable the feature that automatically restarts the
connection to a BGP peer when the connection goes down.rw EnableValue .1.3.6.1.4.1.2272.1.8.101.1.10 |
rcIpBgpGeneralGroupAutoSummaryEnable BGP to summarize networks based on class limlts
(Class A,B,C networks).rw EnableValue .1.3.6.1.4.1.2272.1.8.101.1.11 |
rcIpBgpGeneralGroupSynchronizationEnables and disables the router from accepting routes
from BGP peers without waiting for an update from the
IBGP.rw EnableValue .1.3.6.1.4.1.2272.1.8.101.1.12 |
rcIpBgpGeneralGroupMaxEqualcostRoutesSets the number of maximum number of equal-cost routes
that can be stored in the routing table.rw Integer32 .1.3.6.1.4.1.2272.1.8.101.1.13 |
rcIpBgpGeneralGroupIbgpReportImportRouteConfigure BGP to report imported routes to an interior
BGP peer.rw EnableValue .1.3.6.1.4.1.2272.1.8.101.1.14 |
rcIpBgpGeneralGroupAggregaterw EnableValue .1.3.6.1.4.1.2272.1.8.101.1.15 |
rcIpBgpGeneralGroupFlapDampEnableEnabled or Disabledrw EnableValue .1.3.6.1.4.1.2272.1.8.101.1.16 |
rcIpBgpGeneralGroupDebugMaskvalue is one of multiple (logically by 'OR' of
following value:
none (0),
error(1),
packet(2),
event(4),
trace(8),
warning(16),
state(32),
init(64),
filter(128),
update(256),
all(511)
all(511): Enables all debugging messages.
none(0): Disables all debugging messages.
error(1): Enables disolay of debug error messages.
packet(2): Enables display of debug packet messages.
event(4): Enables display of debug event messages.
trace(8): Enables display debug trace messages.
warning(16): Enables display debug warning messages.
state(32): Enables display of debug state transtion
messages.
init(64): Enables display of debug initialization
messages.
filter(128): Enables display of debug messages related
to filtering.
update(256): Enables display of debug messages related
to sending and receiving updates.rw Integer32 .1.3.6.1.4.1.2272.1.8.101.1.17 |
rcIpBgpGeneralGroupTrapEnablerw EnableValue .1.3.6.1.4.1.2272.1.8.101.1.18 |
rcIpBgpGeneralGroupQuickStartEnable the flag to avoid flap penalty and trigger
the peer start event quicklyrw EnableValue .1.3.6.1.4.1.2272.1.8.101.1.19 |
rcIpBgpGeneralGroupDeterministicMedEnable to allow the comparison of the Multi Exit
Discriminator (MED) for paths from neighbors in
same autonomous system.rw EnableValue .1.3.6.1.4.1.2272.1.8.101.1.20 |
rcIpBgpGeneralGroupRouteRefreshRoute Refresh for Bgp.rw EnableValue .1.3.6.1.4.1.2272.1.8.101.1.21 |
rcIpBgpGeneralGroupRoutePolicyInRoute Policy Name that will be applied to all routes which enter the VRF table.rw DisplayString .1.3.6.1.4.1.2272.1.8.101.1.22 |
rcIpBgpGeneralGroupRoutePolicyOutRoute policy name that will be applied to all routes which are sent out of this VRF instance.rw DisplayString .1.3.6.1.4.1.2272.1.8.101.1.23 |
rcIpBgpGeneralGroupDefaultInformationOriginateIpv6allows the redistribution of default ipv6
network into BGPrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.101.1.24 |
rcIpBgpGeneralGroupNewLocalAsLocal Autonomous system numberrw OCTET STRING .1.3.6.1.4.1.2272.1.8.101.1.25 |
rcIpBgpGeneralGroup4ByteAs4 Byte As number enablerw EnableValue .1.3.6.1.4.1.2272.1.8.101.1.26 |
rcIpBgpGeneralGroupAsDotAs number in Dot formatrw EnableValue .1.3.6.1.4.1.2272.1.8.101.1.27 |
rcIpBgpAggregateTableSizeSize of Aggregate Tablerodeprecated Integer32 .1.3.6.1.4.1.2272.1.8.101.2 |
rcIpBgpAggregateTableTo specify the list of aggregate prefixes to be
created by the BGP routing process and the options
to be used while aggregating.deprecated SEQUENCE OF RcIpBgpAggregateEntry .1.3.6.1.4.1.2272.1.8.101.3 |
rcIpBgpAggregateEntryAn entry of rcIpBgp Aggregate Address In Table. RcIpBgpAggregateEntry .1.3.6.1.4.1.2272.1.8.101.3.1 |
rcIpBgpAggregateAddressPrefix to create an aggregate address in BGP routing table.ro IpAddress .1.3.6.1.4.1.2272.1.8.101.3.1.1 |
rcIpBgpAggregateMaskMask for the aggregratero IpAddress .1.3.6.1.4.1.2272.1.8.101.3.1.2 |
rcIpBgpAggregateAsSetGenerateEnable Generates autonomous system set path
information.rw EnableValue .1.3.6.1.4.1.2272.1.8.101.3.1.3 |
rcIpBgpAggregateSummaryOnlyFilters all more specific routes from updates.rw EnableValue .1.3.6.1.4.1.2272.1.8.101.3.1.4 |
rcIpBgpAggregateSuppressPolicyName of route policy used to select the
routes to be suppressed.rw DisplayString .1.3.6.1.4.1.2272.1.8.101.3.1.5 |
rcIpBgpAggregateAdvertisePolicyName of route policy used to select the
routes to create AS-SET origin communities.rw DisplayString .1.3.6.1.4.1.2272.1.8.101.3.1.6 |
rcIpBgpAggregateAttributePolicyName of route policy used to set the
attribute of the aggregate route.rw DisplayString .1.3.6.1.4.1.2272.1.8.101.3.1.7 |
rcIpBgpAggregateRowStatusRow status for create/delete.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.101.3.1.8 |
rcIpBgpConfederationGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.8.101.4 |
rcIpBgpConfederationIdentifierConfederation AS identifierrw INTEGER .1.3.6.1.4.1.2272.1.8.101.4.1 |
rcIpBgpConfederationPeersThe string represents ConfederatoinPeers as <length,
value>. Maximum size 255,if any, will not be recorded
by this object.
The length is a 1-octet field containing the numbner
of peers in the value field.
The value field contains one or more peers (AS numbers
which are part of the confederation).
Each AS is represented in the octet
string as a pair of octets according to the
following algorithm:
first-byte-of-pair = ASNumber / 256;
second-byte-of-pair = ASNumber & 255;rw OCTET STRING .1.3.6.1.4.1.2272.1.8.101.4.2 |
rcIpBgpRouteReflectorGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.8.101.5 |
rcIpBgpRouteReflectionEnableEnable Route Reflection on this routerrw EnableValue .1.3.6.1.4.1.2272.1.8.101.5.1 |
rcIpBgpRouteReflectorClusterIdCluster ID of this router acting as a route reflectorrw IpAddress .1.3.6.1.4.1.2272.1.8.101.5.2 |
rcIpBgpRouteReflectorClientToClientReflectionWhen this router is configured as a route reflector, and
the clients are fully meshed, a Disable value disables
reflection of routes from one client to another.rw EnableValue .1.3.6.1.4.1.2272.1.8.101.5.3 |
rcIpBgpRouteReflectionOperStateDisplays the current route reflection operational statero EnableValue .1.3.6.1.4.1.2272.1.8.101.5.4 |
rcIpBgpNetworkTableSizeNetwork Prefix table sizerodeprecated Integer32 .1.3.6.1.4.1.2272.1.8.101.6 |
rcIpBgpNetworkTableThe networks in this table are either static/directly
connected or learned routes. Bgp advertises these
network provided they are reachable and are in the IP
routing tabledeprecated SEQUENCE OF RcIpBgpNetworkEntry .1.3.6.1.4.1.2272.1.8.101.7 |
rcIpBgpNetworkEntryAn entry In NetworkTable. RcIpBgpNetworkEntry .1.3.6.1.4.1.2272.1.8.101.7.1 |
rcIpBgpNetworkAddrNetwork prefix that BGP will advertise.rw IpAddress .1.3.6.1.4.1.2272.1.8.101.7.1.1 |
rcIpBgpNetworkMaskNetwork maskro IpAddress .1.3.6.1.4.1.2272.1.8.101.7.1.2 |
rcIpBgpNetworkRowStatusRow status for create/delete.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.101.7.1.3 |
rcIpBgpNetworkMetricValue of the metric to be used while sending
an update for the routes from the network table.
Indicates to set the MED value for the routes
advertised to ebgp peers.rw INTEGER .1.3.6.1.4.1.2272.1.8.101.7.1.4 |
rcIpBgpPeerTableSizeBGP peer table sizerodeprecated Integer32 .1.3.6.1.4.1.2272.1.8.101.8 |
rcIpBgpPeerTableIP BGP Peer tabledeprecated SEQUENCE OF RcIpBgpPeerEntry .1.3.6.1.4.1.2272.1.8.101.9 |
rcIpBgpPeerEntryAn entry of Ip rcIpBgp Peer Table. RcIpBgpPeerEntry .1.3.6.1.4.1.2272.1.8.101.9.1 |
rcIpBgpPeerEnableEnable/Disable: controls whether the peer connection is enabled
or disabledrw Enumeration .1.3.6.1.4.1.2272.1.8.101.9.1.1 |
rcIpBgpPeerIpAddressThe Ip address of this peerro IpAddress .1.3.6.1.4.1.2272.1.8.101.9.1.2 |
rcIpBgpPeerRemoteAsRemote Autonomous system number of this peerrw INTEGER .1.3.6.1.4.1.2272.1.8.101.9.1.3 |
rcIpBgpPeerGroupNamePeer group name to which this peer belongs (optional)rw DisplayString .1.3.6.1.4.1.2272.1.8.101.9.1.4 |
rcIpBgpPeerDefaultOriginateTo allow a BGP speaker (the local router) to send
the default route 0.0.0.0 to a neighbor for use as
a default routerw EnableValue .1.3.6.1.4.1.2272.1.8.101.9.1.5 |
rcIpBgpPeerEbgpMultiHopTo accept and attempt BGP connections to external
peers residing on networks that are not directly
connectedrw EnableValue .1.3.6.1.4.1.2272.1.8.101.9.1.6 |
rcIpBgpPeerAdvertisementIntervalTo set the minimum interval between the sending of
BGP routing updates Time in seconds. Integer from 5
to 120.rw INTEGER .1.3.6.1.4.1.2272.1.8.101.9.1.7 |
rcIpBgpPeerPasswordTo enable MD5 authentication on a TCP connection
between two BGP peers Case-sensitive password of
up to 80 characterrw DisplayString .1.3.6.1.4.1.2272.1.8.101.9.1.8 |
rcIpBgpPeerWeightTo assign an absolute weight to a BGP network.
It can be an integer from 0 to 65535.rw INTEGER .1.3.6.1.4.1.2272.1.8.101.9.1.9 |
rcIpBgpPeerMaxPrefixSets a limit on the number of routes that will be
accepted from a neighbor. A value of zero indicates no
limitrw INTEGER .1.3.6.1.4.1.2272.1.8.101.9.1.10 |
rcIpBgpPeerNextHopSelfSet NextHop Attribute to local router address before
sending updates to remote peerrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.101.9.1.11 |
rcIpBgpPeerRoutePolicyInRoute Policy Name that will be applied to all networks
learned from this peerrw DisplayString .1.3.6.1.4.1.2272.1.8.101.9.1.12 |
rcIpBgpPeerRoutePolicyOutRoute policy name that will be applied to all outgoing
updatesrw DisplayString .1.3.6.1.4.1.2272.1.8.101.9.1.13 |
rcIpBgpPeerRouteReflectorClientIndicates whether this peer is a route reflector client.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.101.9.1.14 |
rcIpBgpPeerSoftReconfigurationInIf Peer soft reconfiguration is enabled in the in-bound
direction, policy can be changed and routes can
re-learned without having to reset the bgp connection.
Enabling soft reconfig-in causes all bgp routes to be
stored in local memory (even non-best routes)rw EnableValue .1.3.6.1.4.1.2272.1.8.101.9.1.15 |
rcIpBgpPeerSoftReconfigurationIf rcIpBgpPeerSoftReconfigurationIn is enabled in the
in-bound direction, policy can be changed and routes can
re-learned without having to reset the bgp connection by
setting rcIpBgpPeerSoftReconfiguration to in(1). Setting
the value to out (2) forces the neighbor to send out all
the updates to the remote neighbor without resetting the
connection.rw Enumeration .1.3.6.1.4.1.2272.1.8.101.9.1.16 |
rcIpBgpPeerRemovePrivateAsEnable and disable private AS number from being
stripped when sending an updaterw EnableValue .1.3.6.1.4.1.2272.1.8.101.9.1.17 |
rcIpBgpPeerRowStatusUsed to create/delete entries in the Table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.101.9.1.18 |
rcIpBgpPeerMD5AuthenticationEnable and Disable MD5 authenticationrw EnableValue .1.3.6.1.4.1.2272.1.8.101.9.1.19 |
rcIpBgpPeerDebugMaskvalue is one of multiple (logically by 'OR' of
following value:
none (0),
error(1),
packet(2),
event(4),
trace(8),
warning(16),
state(32),
init(64),
filter(128),
update(256),
all(511)
all(511): Enables all debugging messages.
none(0): Disables all debugging messages.
error(1): Enables disolay of debug error messages.
packet(2): Enables display of debug packet messages.
event(4): Enables display of debug event messages.
trace(8): Enables display debug trace messages.
warning(16): Enables display debug warning messages.
state(32): Enables display of debug state transtion
messages.
init(64): Enables display of debug initialization
messages.
filter(128): Enables display of debug messages related
to filtering.
update(256): Enables display of debug messages related
to sending and receiving updates.rw INTEGER .1.3.6.1.4.1.2272.1.8.101.9.1.20 |
rcIpBgpPeerSendCommunityrw EnableValue .1.3.6.1.4.1.2272.1.8.101.9.1.21 |
rcIpBgpPeerUpdateSourceInterfaceThe IP address to be used for Circuitless IP.rw IpAddress .1.3.6.1.4.1.2272.1.8.101.9.1.22 |
rcIpBgpPeerStateThe BGP peer connection state.ro Enumeration .1.3.6.1.4.1.2272.1.8.101.9.1.25 |
rcIpBgpPeerLastErrorThe last error code and subcode seen by this
peer on this connection. If no error has
occurred, this field is zero. Otherwise, the
first byte of this two byte OCTET STRING
contains the error code, and the second byte
contains the subcode.ro OCTET STRING .1.3.6.1.4.1.2272.1.8.101.9.1.26 |
rcIpBgpPeerVpnv4AddressThe vpnv4 routes specified.rw EnableValue .1.3.6.1.4.1.2272.1.8.101.9.1.27 |
rcIpBgpPeerIpvpnLiteCapThe IPVPN-lite capability can be enabled or disabled on
the bgp neighbor peer.rw EnableValue .1.3.6.1.4.1.2272.1.8.101.9.1.28 |
rcIpBgpPeerSooAddressThe site-of-origin ip address.rw IpAddress .1.3.6.1.4.1.2272.1.8.101.9.1.29 |
rcIpBgpPeerSooAsNumberThe asnum for the site-of-origin for bgp peer.rw INTEGER .1.3.6.1.4.1.2272.1.8.101.9.1.30 |
rcIpBgpPeerSooAssignedNumThe Assigned number required along with asnum or
address to configure the site-of-origin for bgp peer.rw Unsigned32 .1.3.6.1.4.1.2272.1.8.101.9.1.31 |
rcIpBgpPeerSooTypeThe soo type can be asnum or ipaddress.ro Enumeration .1.3.6.1.4.1.2272.1.8.101.9.1.32 |
rcIpBgpPeerRouteRefreshRoute refresh for bgp peer.rw EnableValue .1.3.6.1.4.1.2272.1.8.101.9.1.33 |
rcIpBgpPeerAsOverrideThe AS Override value can be enabled or disabled for bgp peer.rw EnableValue .1.3.6.1.4.1.2272.1.8.101.9.1.34 |
rcIpBgpPeerAllowAsInThe number of as-in allowed for bgp peerrw INTEGER .1.3.6.1.4.1.2272.1.8.101.9.1.35 |
rcIpBgpPeerGroupTableSizeBGP Peer Group table sizero Integer32 .1.3.6.1.4.1.2272.1.8.101.10 |
rcIpBgpPeerGroupTableIP rcIpBgp Peer Group table. This table contains rows
which are template configuration parameters which are
shared by a group of peers. Peers belonging to the
same group will refer to the same row in this table
using a peer group name SEQUENCE OF RcIpBgpPeerGroupEntry .1.3.6.1.4.1.2272.1.8.101.11 |
rcIpBgpPeerGroupEntryAn entry of Ip rcIpBgp Peer Group Table. RcIpBgpPeerGroupEntry .1.3.6.1.4.1.2272.1.8.101.11.1 |
rcIpBgpPeerGroupEnableAllows disabling a group of peersrw EnableValue .1.3.6.1.4.1.2272.1.8.101.11.1.1 |
rcIpBgpPeerGroupIndexIndex in to the Peer Group Tablero Integer32 .1.3.6.1.4.1.2272.1.8.101.11.1.2 |
rcIpBgpPeerGroupGroupNameName of the BGP peer group to which this neighbor belongrw DisplayString .1.3.6.1.4.1.2272.1.8.101.11.1.3 |
rcIpBgpPeerGroupRemoteAsRemote Autonomous system number of this peer group
(optional)rw Integer32 .1.3.6.1.4.1.2272.1.8.101.11.1.4 |
rcIpBgpPeerGroupDefaultOriginateEnabling this attribute allows a BGP speaker
(the local router) to send the default route 0.0.0.0 to
the group of neighbors for use as a default route.rw Enumeration .1.3.6.1.4.1.2272.1.8.101.11.1.5 |
rcIpBgpPeerGroupEbgpMultiHopTo accept and attempt BGP connections to external
peers residing on networks that are not directly
connectedrw Enumeration .1.3.6.1.4.1.2272.1.8.101.11.1.6 |
rcIpBgpPeerGroupAdvertisementIntervalTo set the minimum interval between the sending of
BGP routing updates Time in seconds. Integer from 1
to 120.rw Integer32 .1.3.6.1.4.1.2272.1.8.101.11.1.7 |
rcIpBgpPeerGroupKeepAliveTo set the time interval in seconds between the sending
of BGP keep alive messages to remote peers.rw Integer32 .1.3.6.1.4.1.2272.1.8.101.11.1.8 |
rcIpBgpPeerGroupHoldTimeTo configure the hold time for the group of peers in
seconds. Usually set to three times the value of the
Keepalive timerw Integer32 .1.3.6.1.4.1.2272.1.8.101.11.1.9 |
rcIpBgpPeerGroupWeightTo assign an absolute weight to a BGP network.
Absolute weight, or importance.
It can be an integer from 0 to 65535.rw Integer32 .1.3.6.1.4.1.2272.1.8.101.11.1.10 |
rcIpBgpPeerGroupMaxPrefixSets a limit on the number of routes that will be
accepted from this group of neighbors. A value of zero
indicates no limitrw Integer32 .1.3.6.1.4.1.2272.1.8.101.11.1.11 |
rcIpBgpPeerGroupNextHopSelfSet NextHop Attribute to local router address before
sending updates to remote peersrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.101.11.1.12 |
rcIpBgpPeerGroupRoutePolicyInRoute Policy Name that will be applied to all networks
learned from this group of peersrw DisplayString .1.3.6.1.4.1.2272.1.8.101.11.1.13 |
rcIpBgpPeerGroupRoutePolicyOutRoute policy name that will be applied to all
outgoing updates to this group of peersrw DisplayString .1.3.6.1.4.1.2272.1.8.101.11.1.14 |
rcIpBgpPeerGroupRouteReflectorClientIndicates whether this group of peers is a route reflector client.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.101.11.1.15 |
rcIpBgpPeerGroupSoftReconfigurationInIf Peer soft reconfiguration is enabled in the in bound
direction, policy can be changed and routes can
re-learned without having to reset the bgp connection.
Enabling soft reconfig-in causes all bgp routes to be
stored in local memory (even non-best routes)rw EnableValue .1.3.6.1.4.1.2272.1.8.101.11.1.16 |
rcIpBgpPeerGroupSoftReconfigurationIf Peer soft reconfiguration-in is enabled in the in
bound direction, policy can be changed and routes can
re-learned without having to reset the bgp connection by
setting rcIpBgpPeerGroupSoftReconfiguration to in(1).
Setting the value to out (2) forces the neighbor to send
out all the updates to the remote neighbor without
resetting the connection.rw Enumeration .1.3.6.1.4.1.2272.1.8.101.11.1.17 |
rcIpBgpPeerGroupPasswordTo enable MD5 authentication on TCP connections
between this local speaker and this group of BGP peers.
Case-sensitive password of up to 80 characterrw DisplayString .1.3.6.1.4.1.2272.1.8.101.11.1.18 |
rcIpBgpPeerGroupRemovePrivateAsEnable and disable private AS number from being
stripped when sending an updaterw EnableValue .1.3.6.1.4.1.2272.1.8.101.11.1.19 |
rcIpBgpPeerGroupRowStatusrow statusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.101.11.1.20 |
rcIpBgpPeerGroupMD5AuthenticationEnable and Disable MD5 authenticationrw EnableValue .1.3.6.1.4.1.2272.1.8.101.11.1.21 |
rcIpBgpPeerGroupSendCommunityEnables or disables sending the update
message community attribute to the specified
peer.rw EnableValue .1.3.6.1.4.1.2272.1.8.101.11.1.22 |
rcIpBgpPeerGroupUpdateSourceInterfaceThe IP address to used for circuitless IP for this peer group.rw IpAddress .1.3.6.1.4.1.2272.1.8.101.11.1.23 |
rcIpBgpPeerGroupVpnv4AddressThe vpnv4 routes specified.rw EnableValue .1.3.6.1.4.1.2272.1.8.101.11.1.24 |
rcIpBgpPeerGroupIpvpnLiteCapThe IPVPN-lite capability can be enabled or disabled on the bgp neighbor peer group.rw EnableValue .1.3.6.1.4.1.2272.1.8.101.11.1.25 |
rcIpBgpPeerGroupRouteRefreshRoute refresh for bgp peer group.rw EnableValue .1.3.6.1.4.1.2272.1.8.101.11.1.30 |
rcIpBgpPeerGroupAsOverrideThe AS Override value can be enabled or disabled for bgp peer group.rw EnableValue .1.3.6.1.4.1.2272.1.8.101.11.1.31 |
rcIpBgpPeerGroupAllowAsInThe number of as-in allowed for bgp peer group.rw Integer32 .1.3.6.1.4.1.2272.1.8.101.11.1.32 |
rcIpBgpPeerGroupDefaultOriginateIpv6Enabling this attribute allows a BGP speaker
(the local router) to send the default route to
the group of neighbors for use as a default
route.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.101.11.1.33 |
rcIpBgpPeerGroupAfUpdateSourceInterfaceTypeThe Inet address type used for circuitless IP
for this peer group.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2272.1.8.101.11.1.34 |
rcIpBgpPeerGroupAfUpdateSourceInterfaceThe Inet address to used for circuitless IP for
this peer group.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2272.1.8.101.11.1.35 |
rcIpBgpPeerGroupIpv6CapThe ipv6 capability can be enabled or disabled
on the bgp neighbor peer group.rw EnableValue .1.3.6.1.4.1.2272.1.8.101.11.1.36 |
rcIpBgpPeerGroupIpv6RoutePolicyInIpv6 Route Policy Name that will be applied to all
networks learned from this group of peersrw DisplayString .1.3.6.1.4.1.2272.1.8.101.11.1.37 |
rcIpBgpPeerGroupIpv6RoutePolicyOutIpv6 Route policy name that will be applied to all
outgoing updates to this group of peersrw DisplayString .1.3.6.1.4.1.2272.1.8.101.11.1.38 |
rcIpBgpRcvdDampenedPathAttrTableSizetable sizero Integer32 .1.3.6.1.4.1.2272.1.8.101.12 |
rcIpBgpRcvdDampenedPathAttrTableThis table contains info about paths to destination
networks received from all BGP-4 peers SEQUENCE OF RcIpBgpDampenedPathAttrEntry .1.3.6.1.4.1.2272.1.8.101.13 |
rcIpBgpDampenedPathAttrEntryInformation about a path to a networks RcIpBgpDampenedPathAttrEntry .1.3.6.1.4.1.2272.1.8.101.13.1 |
rcIpBgpPathAttrPeerThe IP address of the peer where the path info was
learnedro IpAddress .1.3.6.1.4.1.2272.1.8.101.13.1.1 |
rcIpBgpPathAttrIpAddrPrefixLenLength in bits of the IP address prefix in the network
Layer Reachablity Information field.ro INTEGER .1.3.6.1.4.1.2272.1.8.101.13.1.2 |
rcIpBgpPathAttrIpAddrPrefixAn Ip address prefix in the NLRI Information field.
This object is an IP address containing the prefix
with length specified by rcIpBgpPathAttrIpAddrPrefixLen
are zeroed.ro IpAddress .1.3.6.1.4.1.2272.1.8.101.13.1.3 |
rcIpBgpPathAttrFlapPenaltyPenalty value based on number of route flapsro Integer32 .1.3.6.1.4.1.2272.1.8.101.13.1.4 |
rcIpBgpPathAttrFlapCountNumber of times a route flapped since the last time the
penalty was reset to zeroro Integer32 .1.3.6.1.4.1.2272.1.8.101.13.1.5 |
rcIpBgpPathAttrRouteDampenedShows whether this route is currently suppressed from
being announcedro Enumeration .1.3.6.1.4.1.2272.1.8.101.13.1.6 |
rcIpBgpPathAttrReuseTimeRe use time is the system configured time for
route reusero Integer32 .1.3.6.1.4.1.2272.1.8.101.13.1.7 |
rcIpBgpPathAttrReuseTimeRemainRe use time Remain is the number of seconds before the route will be reusedro Integer32 .1.3.6.1.4.1.2272.1.8.101.13.1.8 |
rcIpBgp4PathAttrTableSizetable sizero Integer32 .1.3.6.1.4.1.2272.1.8.101.14 |
rcIpBgp4PathAttrTableThis table contains info about paths to destination
networks received from all BGP-4 peers SEQUENCE OF RcIpBgp4PathAttrEntry .1.3.6.1.4.1.2272.1.8.101.15 |
rcIpBgp4PathAttrEntry RcIpBgp4PathAttrEntry .1.3.6.1.4.1.2272.1.8.101.15.1 |
rcIpBgp4PathAttrPeerThe IP address of the peer where the path info was
learnedro IpAddress .1.3.6.1.4.1.2272.1.8.101.15.1.1 |
rcIpBgp4PathAttrIpAddrPrefixLenLength in bits of the IP address prefix in the network
Layer Reachablity Information field.ro INTEGER .1.3.6.1.4.1.2272.1.8.101.15.1.2 |
rcIpBgp4PathAttrIpAddrPrefixAn Ip address prefix in the NLRI Information field.
This object is an IP address containing the prefix
with length specified by rcIpBgpPathAttrIpAddrPrefixLen
are zeroed.ro IpAddress .1.3.6.1.4.1.2272.1.8.101.15.1.3 |
rcIpBgp4PathAttrCommunitiesThe string represents community path attributes as <length,value>
The length is a 1-octet field containing the numbner of community
numbers in the value field.The value field contains one or more
Community numbers,each community is represented in the octet
string as 4 octets.The community numbers in the string beyond
maximum size 255,if any, will not be recorded by this object.ro OCTET STRING .1.3.6.1.4.1.2272.1.8.101.15.1.4 |
rcIpBgp4PathAttrOriginateIdThe IP address of the route who originates the routesro IpAddress .1.3.6.1.4.1.2272.1.8.101.15.1.5 |
rcIpBgp4PathAttrClusterIdThe string represents Cluster Id path attributes as <length,value>
The length is a 1-octet field containing the number of Cluster Id
numbers in the value field.The value field contains one or more
Cluster Id numbers,each Cluster Id is represented in the octet
string as 4 octets,each four octets is the IpAddress of the
router acting as a route reflector.The Cluster Id numbers in the
string beyond maximum size 255,if any, will not be recorded by
this object.ro OCTET STRING .1.3.6.1.4.1.2272.1.8.101.15.1.6 |
rcIpBgpExt OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.8.101.16 |
rcIpBgpExtAggregateAfTableSizeSize of address family independent bgp aggregate tablero Unsigned32 .1.3.6.1.4.1.2272.1.8.101.16.1 |
rcIpBgpExtAggregateAfTableReplaces rcIpBgpAggregateTable.
To specify the list of ipv4 and ipv6 aggregate
prefixes to be created by the BGP routing process
and the options to be used while aggregating. SEQUENCE OF RcIpBgpExtAggregateAfEntry .1.3.6.1.4.1.2272.1.8.101.16.2 |
rcIpBgpExtAggregateAfEntryAn entry of v4/v6 aggregate prefix to be created by
BGP routing process and the options to be used
while aggregating. RcIpBgpExtAggregateAfEntry .1.3.6.1.4.1.2272.1.8.101.16.2.1 |
rcIpBgpExtAggregateAfAddressTypeInet Address Type of aggregate address. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2272.1.8.101.16.2.1.1 |
rcIpBgpExtAggregateAfAddressV4 or V6 Prefix to create an aggregate address in BGP
routing table. InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2272.1.8.101.16.2.1.2 |
rcIpBgpExtAggregateAfPrefixLenPrefix length of the aggregate inet address InetAddressPrefixLength (INET-ADDRESS-MIB) .1.3.6.1.4.1.2272.1.8.101.16.2.1.3 |
rcIpBgpExtAggregateAfAsSetGenerateEnable Generates autonomous system set path
information.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.101.16.2.1.4 |
rcIpBgpExtAggregateAfSummaryOnlyFilters all more specific routes from updates.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.101.16.2.1.5 |
rcIpBgpExtAggregateAfSuppressPolicyName of route policy used to select the
routes to be suppressed.rw SnmpAdminString .1.3.6.1.4.1.2272.1.8.101.16.2.1.6 |
rcIpBgpExtAggregateAfAdvertisePolicyName of route policy used to select the
routes to create AS-SET origin communities.rw SnmpAdminString .1.3.6.1.4.1.2272.1.8.101.16.2.1.7 |
rcIpBgpExtAggregateAfAttributePolicyName of route policy used to set the
attribute of the aggregate route.rw SnmpAdminString .1.3.6.1.4.1.2272.1.8.101.16.2.1.8 |
rcIpBgpExtAggregateAfRowStatusRow status for create/delete.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.101.16.2.1.9 |
rcIpBgpExtNetworkAfTableSizeAddress family independent bgp Network Prefix table sizero Unsigned32 .1.3.6.1.4.1.2272.1.8.101.16.3 |
rcIpBgpExtNetworkAfTableThis table replaces rcIpBgpNetworkTable.
This table supports V4 and V6 BGP networks.
The networks in this table are either
static/directly connected or learned routes.
Bgp advertises these network provided they are
reachable and are in the IP routing table SEQUENCE OF RcIpBgpExtNetworkAfEntry .1.3.6.1.4.1.2272.1.8.101.16.4 |
rcIpBgpExtNetworkAfEntryAn entry in bgp NetworkTable. RcIpBgpExtNetworkAfEntry .1.3.6.1.4.1.2272.1.8.101.16.4.1 |
rcIpBgpExtNetworkAfAddrTypeInet address type of the Network prefix that BGP will
advertise. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2272.1.8.101.16.4.1.1 |
rcIpBgpExtNetworkAfAddrv4/v6 Network prefix that BGP will advertise. InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2272.1.8.101.16.4.1.2 |
rcIpBgpExtNetworkAfPrefixLenPrefix length of the v4/v6 bgp network address InetAddressPrefixLength (INET-ADDRESS-MIB) .1.3.6.1.4.1.2272.1.8.101.16.4.1.3 |
rcIpBgpExtNetworkAfMetricValue of the metric to be used while sending
an update for the routes from the network table.
Indicates to set the MED value for the routes
advertised to ebgp Peers.rw Integer32 .1.3.6.1.4.1.2272.1.8.101.16.4.1.4 |
rcIpBgpExtNetworkAfRowStatusRow status for create/delete.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.101.16.4.1.5 |
rcIpBgpExtPeerAfTableSizeSize of Address family independent BGP
Peer Tablero Unsigned32 .1.3.6.1.4.1.2272.1.8.101.16.5 |
rcIpBgpExtPeerAfTableExtension to the BGP peer table. This table contains,
one entry per BGP peer, information about the connections
with BGP Peers, which is not supported by the standard
MIB draft. This table replaces rcIpBgpPeerTable. SEQUENCE OF RcIpBgpExtPeerAfEntry .1.3.6.1.4.1.2272.1.8.101.16.6 |
rcIpBgpExtPeerAfEntryEntry containing miscelleneous information (info not
present in the standard BGP peer table) about the
connection with a remote BGP peer . RcIpBgpExtPeerAfEntry .1.3.6.1.4.1.2272.1.8.101.16.6.1 |
rcIpBgpExtPeerAfGroupNamePeer group name to which this peer belongs (optional)rw SnmpAdminString .1.3.6.1.4.1.2272.1.8.101.16.6.1.1 |
rcIpBgpExtPeerAfDefaultOriginateTo allow a BGP speaker (the local router) to
send the default route 0.0.0.0 to a neighbor for
use as a default routerw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.101.16.6.1.2 |
rcIpBgpExtPeerAfDefaultOriginateIpv6To allow a BGP speaker (the local router) to
Send the default ipv6 route to a neighbor for
use as a default routerw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.101.16.6.1.3 |
rcIpBgpExtPeerAfEbgpMultiHopTo accept and attempt BGP connections to
external peers residing on networks that are not
directly connectedrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.101.16.6.1.4 |
rcIpBgpExtPeerAfAdvertisementIntervalTo set the minimum interval between the sending
Of BGP routing updates Time in seconds. Integer
from 5 to 120.rw Integer32 .1.3.6.1.4.1.2272.1.8.101.16.6.1.5 |
rcIpBgpExtPeerAfPasswordTo enable MD5 authentication on a TCP connection
between two BGP Peers Case-sensitive password of
up to 80 characterrw SnmpAdminString .1.3.6.1.4.1.2272.1.8.101.16.6.1.6 |
rcIpBgpExtPeerAfWeightTo assign an absolute weight to a BGP network.
It can be an integer from 0 to 65535.rw Integer32 .1.3.6.1.4.1.2272.1.8.101.16.6.1.7 |
rcIpBgpExtPeerAfMaxPrefixSets a limit on the number of routes that will
be accepted from a neighbor. A value of zero
indicates no limitrw Integer32 .1.3.6.1.4.1.2272.1.8.101.16.6.1.8 |
rcIpBgpExtPeerAfNextHopSelfSet NextHop Attribute to local router address
Before sending updates to remote peerrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.101.16.6.1.9 |
rcIpBgpExtPeerAfRoutePolicyInRoute Policy Name that will be applied to all
Networks learned from this peerrw SnmpAdminString .1.3.6.1.4.1.2272.1.8.101.16.6.1.10 |
rcIpBgpExtPeerAfRoutePolicyOutRoute policy name that will be applied to all
outgoing updatesrw SnmpAdminString .1.3.6.1.4.1.2272.1.8.101.16.6.1.11 |
rcIpBgpExtPeerAfRouteReflectorClientIndicates whether this peer is a route reflector
client.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.101.16.6.1.12 |
rcIpBgpExtPeerAfSoftReconfigurationInIf Peer soft reconfiguration is enabled in the
in-bound direction, policy can be changed and
routes can re-learned without having to reset
the bgp connection. Enabling soft reconfig-in
causes all bgp routes to be stored in local
memory (even non-best routes)rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.101.16.6.1.13 |
rcIpBgpExtPeerAfSoftReconfigurationIf rcIpBgpExtPeerAfSoftReconfigurationIn is enabled
in the in-bound direction, policy can be changed
and routes can re-learned without having to
reset the bgp connection by setting
rcIpBgpExtPeerAfSoftReconfiguration to in(1).
Setting the value to out (2) forces the neighbor
to send out all the updates to the remote
neighbor without resetting the connection.rw Enumeration .1.3.6.1.4.1.2272.1.8.101.16.6.1.14 |
rcIpBgpExtPeerAfRemovePrivateAsEnable and disable private AS number from being
stripped when sending an updaterw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.101.16.6.1.15 |
rcIpBgpExtPeerAfMD5AuthenticationEnable and Disable MD5 authenticationrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.101.16.6.1.16 |
rcIpBgpExtPeerAfDebugMaskvalue is one of multiple (logically by 'OR' of
following value:
none (0),
error(1),
packet(2),
event(4),
trace(8),
warning(16),
state(32),
init(64),
filter(128),
update(256),
all(511)
all(511): Enables all debugging messages.
none(0): Disables all debugging messages.
error(1): Enables display of debug error
messages.
packet(2): Enables display of debug packet
messages.
event(4): Enables display of debug event
messages.
trace(8): Enables display debug trace messages.
warning(16): Enables display debug warning
messages.
state(32): Enables display of debug state
transition messages.
init(64): Enables display of debug
initialization messages.
filter(128): Enables display of debug messages
related to filtering.
update(256): Enables display of debug messages
related to sending and receiving
updates.rw Integer32 .1.3.6.1.4.1.2272.1.8.101.16.6.1.17 |
rcIpBgpExtPeerAfSendCommunityEnables or disables sending the update message
community attribute to the specified peer.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.101.16.6.1.18 |
rcIpBgpExtPeerAfUpdateSourceInterfaceThe Inet address to be used for Circuitless IP.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2272.1.8.101.16.6.1.19 |
rcIpBgpExtPeerAfVpnv4AddressThe vpnv4 routes specified.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.101.16.6.1.20 |
rcIpBgpExtPeerAfIpv6CapThe ipv6 capability can be enabled or
disabled on the bgp neighbor peer.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.101.16.6.1.21 |
rcIpBgpExtPeerAfIpvpnLiteCapThe IPVPN-lite capability can be enabled or
disabled on the bgp neighbor peer.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.101.16.6.1.22 |
rcIpBgpExtPeerAfSooAddressThe site-of-origin ip address.rw IpAddress .1.3.6.1.4.1.2272.1.8.101.16.6.1.23 |
rcIpBgpExtPeerAfSooAsNumberThe asnum for the site-of-origin for bgp peer.rw Integer32 .1.3.6.1.4.1.2272.1.8.101.16.6.1.24 |
rcIpBgpExtPeerAfSooAssignedNumThe Assigned number required along with asnum or
address to configure the site-of-origin for bgp
peer.rw Unsigned32 .1.3.6.1.4.1.2272.1.8.101.16.6.1.25 |
rcIpBgpExtPeerAfSooTypeThe soo type can be asnum or ipaddress.ro Enumeration .1.3.6.1.4.1.2272.1.8.101.16.6.1.26 |
rcIpBgpExtPeerAfRouteRefreshRoute refresh for bgp peer.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.101.16.6.1.27 |
rcIpBgpExtPeerAfAsOverrideThe AS Override value can be enabled or disabled
for bgp peer.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.101.16.6.1.28 |
rcIpBgpExtPeerAfAllowAsInThe number of as-in allowed for bgp peer.rw Integer32 .1.3.6.1.4.1.2272.1.8.101.16.6.1.29 |
rcIpBgpExtPeerAfIpv6RoutePolicyInIpv6 Route Policy Name that will be applied to all
Networks learned from this peerrw SnmpAdminString .1.3.6.1.4.1.2272.1.8.101.16.6.1.30 |
rcIpBgpExtPeerAfIpv6RoutePolicyOutIpv6 Route policy name that will be applied to all
outgoing updatesrw SnmpAdminString .1.3.6.1.4.1.2272.1.8.101.16.6.1.31 |
rcIpBgpExtPeerAfEnableUsed to enable/disable bgp+ peerrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.101.16.6.1.32 |
rcIpBgpExtPeerAfRemoteAsUsed to manually configure the remote as of the bgp+
peer.rw InetAutonomousSystemNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.2272.1.8.101.16.6.1.33 |
rcIpBgpExtPeerAfConnectRetryIntervalUsed to configure the ConnectRetry timer for the
BGP+ peer.rw Unsigned32 .1.3.6.1.4.1.2272.1.8.101.16.6.1.34 |
rcIpBgpExtPeerAfHoldTimeConfiguredUsed to configure the Hold Timer for the BGP+ peer.rw Unsigned32 ( 0 | 3..65535 ) UNITS "seconds" .1.3.6.1.4.1.2272.1.8.101.16.6.1.35 |
rcIpBgpExtPeerAfKeepAliveConfiguredUsed to configure the KeepAlive Timer for the BGP+ peer.rw Unsigned32 ( 0 | 1..21845 ) UNITS "seconds" .1.3.6.1.4.1.2272.1.8.101.16.6.1.36 |
rcIpBgpExtPeerAfRowStatusUsed to create/delete entries in the Table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.101.16.6.1.37 |
rcIpBgpExtPeerAfNewRemoteAsRemote Autonomous system number of this peerrw OCTET STRING .1.3.6.1.4.1.2272.1.8.101.16.6.1.38 |
rcIpBgpExtAfPathAttrTableExtension to rcIpBgpTmpAfPathAttrTable. This table contains
info about additional BGP path attributes not covered in
rcIpBgpTmpAfPathAttrTable. SEQUENCE OF RcIpBgpExtAfPathAttrEntry .1.3.6.1.4.1.2272.1.8.101.16.7 |
rcIpBgpExtAfPathAttrEntryEach entry contains data about additional path attributes
associated with a given prefix in the rcIpBgpTmpNlriTable. RcIpBgpExtAfPathAttrEntry .1.3.6.1.4.1.2272.1.8.101.16.7.1 |
rcIpBgpExtAfPathAttrUnknownReplaces bgp4PathAttrUnknown.
One or more path attributes not understood
by this BGP4 speaker. Size zero (0)
indicates the absence of such
attribute(s). Octets beyond the maximum
size, if any, are not recorded by this
object.ro OCTET STRING .1.3.6.1.4.1.2272.1.8.101.16.7.1.1 |
rcIpBgpExtAfPathAttrCommunitiesThe string represents BGP+ community path attributes as
<length ,value>. The length is a 1-octet field containing the
numbner of community numbers in the value field.The value field
contains one or more Community numbers,each community is
represented in the octet string as 4 octets.The community numbers
in the string beyond maximum size 255,if any, will not be recorded
by this object.ro OCTET STRING .1.3.6.1.4.1.2272.1.8.101.16.7.1.2 |
rcIpBgpExtAfPathAttrOriginateIdIn a BGP+ context, the IP address of the router which
originates the routes.ro IpAddress .1.3.6.1.4.1.2272.1.8.101.16.7.1.3 |
rcIpBgpExtAfPathAttrClusterIdThe string represents BGP+ Cluster Id path attributes as
<length,value>. The length is a 1-octet field containing
the number of Cluster Id numbers in the value field. The
value field contains one or more Cluster Id numbers, each Cluster Id is represented in the octet string as 4
octets, each four octets is the IpAddress of the router
acting as a route reflector.The Cluster Id numbers in the
string beyond maximum size 255,if any, will not be
recorded by this object.ro OCTET STRING .1.3.6.1.4.1.2272.1.8.101.16.7.1.4 |
rcIpBgpTmp OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.8.101.17 |
rcIpBgpTmpNotification OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.8.101.17.0 |
rcIpBgpTmpEstablishedNotificationThe rcIpBgpTmpEstablishedNotification event is generated
when the BGP FSM enters the established state.
This Notification replaces the bgpEstablished
Notification and has been replaced by
rcIpBgpTmpAfEstablishedNotification. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.8.101.17.0.1 |
rcIpBgpTmpBackwardTransNotificationThe rcIpBgpBackwardTransNotification event is
generated when the BGP FSM moves from a higher
numbered state to a lower numbered state.
This Notification replaces the
bgpBackwardsTransition Notification and has
been replaced by rcIpBgpTmpAfBackwardsNotification. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.8.101.17.0.2 |
rcIpBgpTmpAfEstablishedNotificationThe BGP Established event is generated when
the BGP FSM enters the established state. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.8.101.17.0.3 |
rcIpBgpTmpAfBackwardTransitionNotificationThe BGPBackwardTransition Event is generated
when the BGP FSM moves from a higher numbered
state to a lower numbered state.
Due to the nature of the BGP state machine, an implementation MAY
rate limit the generation of this event. An implementation MAY
also generate this notification ONLY when the state machine moves
out of the established state. An implementation should document
its specific behavior. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.8.101.17.0.4 |
rcIpBgpTmpLocalAsNewThe local autonomous system number.
This object supports 4 byte ASes and replaces
bgpLocalAs.ro InetAutonomousSystemNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.2272.1.8.101.17.9 |
rcIpBgpTmpPeerAf OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.8.101.17.10 |
rcIpBgpTmpPeerAfTableBGP peer table. This table contains, one entry per BGP
peer, information about the connections with BGP peers.
This table replaces bgpPeerTable. SEQUENCE OF RcIpBgpTmpPeerAfEntry .1.3.6.1.4.1.2272.1.8.101.17.10.1 |
rcIpBgpTmpPeerAfEntryEntry containing information about the connection with
a remote BGP peer. RcIpBgpTmpPeerAfEntry .1.3.6.1.4.1.2272.1.8.101.17.10.1.1 |
rcIpBgpTmpPeerAfInstanceThe routing instance index.
Some BGP implementations permit the creation of
multiple instances of a BGP routing process. An
example includes routers running BGP/MPLS IP Virtual
Private Networks.
Implementations that do not support multiple
routing instances should return 1 for this object. Unsigned32 .1.3.6.1.4.1.2272.1.8.101.17.10.1.1.1 |
rcIpBgpTmpPeerAfLocalAddrTypeThe address family of the local end of the peering
session. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2272.1.8.101.17.10.1.1.2 |
rcIpBgpTmpPeerAfLocalAddrThe local IP address of this entry's BGP connection. InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2272.1.8.101.17.10.1.1.3 |
rcIpBgpTmpPeerAfRemoteAddrTypeThe address family of the remote end of the peering
session. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2272.1.8.101.17.10.1.1.4 |
rcIpBgpTmpPeerAfRemoteAddrThe remote IP address of this entry's BGP peer. InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2272.1.8.101.17.10.1.1.5 |
rcIpBgpTmpPeerAfLocalPortThe local port for the TCP connection between the BGP
peers.ro InetPortNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.2272.1.8.101.17.10.1.1.6 |
rcIpBgpTmpPeerAfLocalAsSome implementations of BGP can represent themselves
as multiple ASes. This is the AS that this peering
session is representing itself as to the remote peer.ro InetAutonomousSystemNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.2272.1.8.101.17.10.1.1.7 |
rcIpBgpTmpPeerAfRemotePortThe remote port for the TCP connection between the BGP
peers.
Note that the objects rcIpBgpTmpPeerAfLocalAddr,
rcIpBgpTmpPeerAfLocalPort, rcIpBgpTmpPeerAfRemoteAddr and
rcIpBgpTmpPeerAfRemotePort provide the appropriate reference to
the standard MIB TCP connection table, or even the ipv6
TCP MIB as in RFC 4022.ro InetPortNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.2272.1.8.101.17.10.1.1.8 |
rcIpBgpTmpPeerAfRemoteAsThe remote autonomous system number received in the BGP
OPEN message.ro InetAutonomousSystemNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.2272.1.8.101.17.10.1.1.9 |
rcIpBgpTmpPeerAfIdentifierThe BGP Identifier of this entry's remote BGP peer.
This entry should be 0.0.0.0 unless the
rcIpBgpTmpPeerAfPeerState is in the openconfirm or the
established state.ro RcIpBgpTmpIdentifierTC .1.3.6.1.4.1.2272.1.8.101.17.10.1.1.10 |
rcIpBgpTmpPeerAfAdminStatusWhether or not the BGP FSM for this remote peer is
halted or running. The BGP FSM for a remote peer is
halted after processing a Stop event. Likewise, it is
in the running state after a Start event.
The rcIpBgpTmpPeerAfState will generally be in the idle state
when the FSM is halted, although some extensions such
as Graceful Restart will leave the peer in the Idle
state but with the FSM running.ro Enumeration .1.3.6.1.4.1.2272.1.8.101.17.10.1.1.11 |
rcIpBgpTmpPeerAfPeerStateThe BGP peer connection state.ro Enumeration .1.3.6.1.4.1.2272.1.8.101.17.10.1.1.12 |
rcIpBgpTmpPeerAfConfiguredVersionThe configured version to originally start with this
remote peer. The BGP speaker may permit negotiation to a
lower version number of the protocol.ro Unsigned32 .1.3.6.1.4.1.2272.1.8.101.17.10.1.1.13 |
rcIpBgpTmpPeerAfNegotiatedVersionThe negotiated version of BGP running between
the two peers.
This entry MUST be zero (0) unless the
rcIpBgpTmpPeerAfState is in the openconfirm or the
established state.
Note that legal values for this object are
between 0 and 255.ro Unsigned32 .1.3.6.1.4.1.2272.1.8.101.17.10.1.1.14 |
rcIpBgpTmpPeerAfErrors OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.8.101.17.10.2 |
rcIpBgpTmpPeerAfErrorsTableOn a per-peer basis, this table reflects the last
protocol-defined error encountered and reported on
the peer session. If no entry for a given peer
exists in this table, then no such errors have been
observed, reported, and recorded on the session. SEQUENCE OF RcIpBgpTmpPeerAfErrorsEntry .1.3.6.1.4.1.2272.1.8.101.17.10.2.1 |
rcIpBgpTmpPeerAfErrorsEntryEach entry contains information about errors sent
and received for a particular BGP peer. RcIpBgpTmpPeerAfErrorsEntry .1.3.6.1.4.1.2272.1.8.101.17.10.2.1.1 |
rcIpBgpTmpPeerAfLastErrorCodeReceivedThe last error code received from this peer via NOTIFICATION
message on this connection. If no error has occurred, this
field is zero.ro OCTET STRING .1.3.6.1.4.1.2272.1.8.101.17.10.2.1.1.1 |
rcIpBgpTmpPeerAfLastErrorSubCodeReceivedThe last subcode received from this peer via NOTIFICATION
message on this connection. If no error has occurred, this
field is zero.ro OCTET STRING .1.3.6.1.4.1.2272.1.8.101.17.10.2.1.1.2 |
rcIpBgpTmpPeerAfLastErrorReceivedTimeThe timestamp that the last NOTIFICATION was received from
this peer.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.101.17.10.2.1.1.3 |
rcIpBgpTmpPeerAfLastErrorReceivedTextThis object contains an implementation specific
explanation of the error that was reported.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.2272.1.8.101.17.10.2.1.1.4 |
rcIpBgpTmpPeerAfLastErrorReceivedDataThe last error code's data seen by this peer.
Per RFC 2578, some implementations may have limitations
dealing with OCTET STRINGS larger than 255. Thus, this
data may be truncated.ro OCTET STRING .1.3.6.1.4.1.2272.1.8.101.17.10.2.1.1.5 |
rcIpBgpTmpPeerAfLastErrorCodeSentThe last error code sent to this peer via NOTIFICATION
message on this connection. If no error has occurred, this
field is zero.ro OCTET STRING .1.3.6.1.4.1.2272.1.8.101.17.10.2.1.1.6 |
rcIpBgpTmpPeerAfLastErrorSubCodeSentThe last subcode sent to this peer via NOTIFICATION
message on this connection. If no error has occurred, this
field is zero.ro OCTET STRING .1.3.6.1.4.1.2272.1.8.101.17.10.2.1.1.7 |
rcIpBgpTmpPeerAfLastErrorSentTimeThe timestamp that the last NOTIFICATION was sent to
this peer.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.101.17.10.2.1.1.8 |
rcIpBgpTmpPeerAfLastErrorSentTextThis object contains an implementation specific
explanation of the error that is being reported.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.2272.1.8.101.17.10.2.1.1.9 |
rcIpBgpTmpPeerAfLastErrorSentDataThe last error code's data sent to this peer.
Per RFC 2578, some implementations may have limitations
dealing with OCTET STRINGS larger than 255. Thus, this
data may be truncated.ro OCTET STRING .1.3.6.1.4.1.2272.1.8.101.17.10.2.1.1.10 |
rcIpBgpTmpPeerAfTimers OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.8.101.17.10.3 |
rcIpBgpTmpPeerAfEventTimesTableA table reporting the per-peering session amount
of time elapsed and update events since the peering
session advanced into the established state. SEQUENCE OF RcIpBgpTmpPeerAfEventTimesEntry .1.3.6.1.4.1.2272.1.8.101.17.10.3.1 |
rcIpBgpTmpPeerAfEventTimesEntryEach row contains a set of statistics about time
spent and events encountered in the peer session
established state. RcIpBgpTmpPeerAfEventTimesEntry .1.3.6.1.4.1.2272.1.8.101.17.10.3.1.1 |
rcIpBgpTmpPeerAfFsmEstablishedTimeThis timer indicates how long (in seconds) this peer
has been in the established state or how long since this
peer was last in the established state. It is set to
zero when a new peer is configured or when the router is
booted. If the peer has never reached the established
state, the value remains zero.ro Gauge32 UNITS "seconds" .1.3.6.1.4.1.2272.1.8.101.17.10.3.1.1.1 |
rcIpBgpTmpPeerAfInUpdatesElapsedTimeElapsed time (in seconds) since the last BGP UPDATE
message was received from the peer. Each time
bgpPeerInUpdates is incremented, the value of this
object is set to zero (0).ro Gauge32 UNITS "seconds" .1.3.6.1.4.1.2272.1.8.101.17.10.3.1.1.2 |
rcIpBgpTmpPeerAfConfiguredTimersTablePer peer management data on BGP session timers. SEQUENCE OF RcIpBgpTmpPeerAfConfiguredTimersEntry .1.3.6.1.4.1.2272.1.8.101.17.10.3.2 |
rcIpBgpTmpPeerAfConfiguredTimersEntryEach entry corresponds to the current state of
BGP timers on a given peering session. RcIpBgpTmpPeerAfConfiguredTimersEntry .1.3.6.1.4.1.2272.1.8.101.17.10.3.2.1 |
rcIpBgpTmpPeerAfConnectRetryIntervalTime interval (in seconds) for the ConnectRetry timer.
The suggested value for this timer is 120 seconds.ro Unsigned32 .1.3.6.1.4.1.2272.1.8.101.17.10.3.2.1.1 |
rcIpBgpTmpPeerAfHoldTimeConfiguredTime interval (in seconds) for the Hold Timer
established with the peer. The value of this object is
calculated by this BGP speaker, using the smaller of the
values in bgpPeerHoldTimeConfigured and the Hold Time
received in the OPEN message.
This value must be at least three seconds if it is not
zero (0).
If the Hold Timer has not been established with the
peer this object MUST have a value of zero (0).
If the bgpPeerHoldTimeConfigured object has a value of
(0), then this object MUST have a value of (0).ro Unsigned32 ( 0 | 3..65535 ) UNITS "seconds" .1.3.6.1.4.1.2272.1.8.101.17.10.3.2.1.2 |
rcIpBgpTmpPeerAfKeepAliveConfiguredTime interval (in seconds) for the KeepAlive timer
configured for this BGP speaker with this peer. The
value of this object will only determine the KEEPALIVE
messages' frequency relative to the value specified in
bgpPeerHoldTimeConfigured; the actual time interval for
the KEEPALIVE messages is indicated by bgpPeerKeepAlive.
A reasonable maximum value for this timer would be one
third of that of bgpPeerHoldTimeConfigured.
If the value of this object is zero (0), no periodic
KEEPALIVE messages are sent to the peer after the BGP
connection has been established. The suggested value
for this timer is 30 seconds.ro Unsigned32 ( 0 | 1..21845 ) UNITS "seconds" .1.3.6.1.4.1.2272.1.8.101.17.10.3.2.1.3 |
rcIpBgpTmpPeerAfMinASOrigIntervalTime interval (in seconds) for the
MinASOriginationInterval timer.
The suggested value for this timer is 15 seconds.ro Unsigned32 .1.3.6.1.4.1.2272.1.8.101.17.10.3.2.1.4 |
rcIpBgpTmpPeerAfMinRouteAdverIntervalTime interval (in seconds) for the
MinRouteAdvertisementInterval timer.
The suggested value for this timer is 30 seconds for
EBGP connections and 5 seconds for IBGP connections.ro Unsigned32 .1.3.6.1.4.1.2272.1.8.101.17.10.3.2.1.5 |
rcIpBgpTmpPeerAfNegotiatedTimersTableConfigured values of per-peer timers are seen
in the rcIpBgpTmpPeerAfConfiguredTimersTable.
Values in this table reflect the current
operational values, after negotiation from values
derived from initial configuration. SEQUENCE OF RcIpBgpTmpPeerAfNegotiatedTimersEntry .1.3.6.1.4.1.2272.1.8.101.17.10.3.3 |
rcIpBgpTmpPeerAfNegotiatedTimersEntryEach entry reflects a value of the currently
operational, negotiated timer as reflected in the
rcIpBgpTmpPeerAfNegotiatedTimersEntry. RcIpBgpTmpPeerAfNegotiatedTimersEntry .1.3.6.1.4.1.2272.1.8.101.17.10.3.3.1 |
rcIpBgpTmpPeerAfHoldTimeThe value of this object is calculated by this BGP
Speaker as being;
zero (0) - if this was the value sent by the peer and
this value is permitted by this BGP Speaker. In this
case, no keepalive messages are sent and the Hold Timer
is not set.
At least three (3). This value is the smaller of
the value sent by this peer in the OPEN message and
rcIpBgpTmpPeerAfHoldTimeConfigured for this peer.
This value is only defined when the peering session is
in the Established state.ro Unsigned32 ( 0 | 3..65535 ) UNITS "seconds" .1.3.6.1.4.1.2272.1.8.101.17.10.3.3.1.1 |
rcIpBgpTmpPeerAfKeepAliveTime interval in seconds for the KeepAlive timer
established with the peer. The value of this object
is calculated by this BGP speaker such that, when
compared with rcIpBgpTmpPeerAfHoldTime, it has the same
proportion as what rcIpBgpTmpPeerAfKeepAliveConfigured has
when compared with rcIpBgpTmpPeerAfHoldTimeConfigured. If
the value of this object is zero (0), it indicates
that the KeepAlive timer has not been established
with the peer, or, the value of
rcIpBgpTmpPeerAfKeepAliveConfigured is zero (0).
This value is only defined when the peering session is
in the Established state.ro Unsigned32 ( 0 | 1..21845 ) UNITS "seconds" .1.3.6.1.4.1.2272.1.8.101.17.10.3.3.1.2 |
rcIpBgpTmpPeerAfCounters OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.8.101.17.10.4 |
rcIpBgpTmpPeerAfCountersTableThe counters associated with a BGP Peer. SEQUENCE OF RcIpBgpTmpPeerAfCountersEntry .1.3.6.1.4.1.2272.1.8.101.17.10.4.1 |
rcIpBgpTmpPeerAfCountersEntryEach entry contains counters of message transmissions
and FSM transitions for a given BGP Peering session. RcIpBgpTmpPeerAfCountersEntry .1.3.6.1.4.1.2272.1.8.101.17.10.4.1.1 |
rcIpBgpTmpPeerAfInUpdatesThe number of BGP UPDATE messages received on this
connection.ro Counter32 .1.3.6.1.4.1.2272.1.8.101.17.10.4.1.1.1 |
rcIpBgpTmpPeerAfOutUpdatesThe number of BGP UPDATE messages transmitted on this
connection.ro Counter32 .1.3.6.1.4.1.2272.1.8.101.17.10.4.1.1.2 |
rcIpBgpTmpPeerAfInTotalMessagesThe total number of messages received from the remote
peer on this connection.ro Counter32 .1.3.6.1.4.1.2272.1.8.101.17.10.4.1.1.3 |
rcIpBgpTmpPeerAfOutTotalMessagesThe total number of messages transmitted to the remote
peer on this connection.ro Counter32 .1.3.6.1.4.1.2272.1.8.101.17.10.4.1.1.4 |
rcIpBgpTmpPeerAfFsmEstablishedTransitionsThe total number of times the BGP FSM transitioned into
the established state for this peer.ro Counter32 .1.3.6.1.4.1.2272.1.8.101.17.10.4.1.1.5 |
rcIpBgpTmpRib OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.8.101.17.11 |
rcIpBgpTmpNlriTableThe BGP-4 Received Path Attribute Table contains
information about paths to destination networks
received from all BGP4 peers. Collectively, this
represents the Adj-Ribs-In. The route where
rcIpBgpTmpNlriBest is true represents, for this NLRI,
the route that is installed in the LocRib from the
Adj-Ribs-In. SEQUENCE OF RcIpBgpTmpNlriEntry .1.3.6.1.4.1.2272.1.8.101.17.11.1 |
rcIpBgpTmpNlriEntryInformation about a path to a network. RcIpBgpTmpNlriEntry .1.3.6.1.4.1.2272.1.8.101.17.11.1.1 |
rcIpBgpTmpNlriIndexThis index allows for multiple instances of a base
prefix for a certain AFI-SAFI from a given peer.
This is currently useful for two things:
1. Allowing for a peer in future implementations to
send more than a single route instance.
2. Allow for extensions which extend the NLRI field
to send the same prefix while utilizing other
extension specific information. An example of
this is RFC 3107 - Carrying MPLS labels in BGP. Unsigned32 .1.3.6.1.4.1.2272.1.8.101.17.11.1.1.1 |
rcIpBgpTmpNlriAfiThe address family of the prefix for this NLRI.
Note that the AFI is not necessarily equivalent to
the an InetAddressType. RcIpBgpTmpAddressFamilyIdentifierTC .1.3.6.1.4.1.2272.1.8.101.17.11.1.1.2 |
rcIpBgpTmpNlriSafiThe subsequent address family of the prefix for
this NLRI RcIpBgpTmpSubsequentAddressFamilyIdentifierTC .1.3.6.1.4.1.2272.1.8.101.17.11.1.1.3 |
rcIpBgpTmpNlriPrefixTypeThe type of the IP address prefix in the
Network Layer Reachability Information field.
The value of this object is derived from the
appropriate value from the rcIpBgpTmpNlriAfi field.
Where an appropriate InetAddressType is not
available, the value of the object must be
unknown(0).ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2272.1.8.101.17.11.1.1.4 |
rcIpBgpTmpNlriPrefixAn IP address prefix in the Network Layer
Reachability Information field. This object
is an IP address containing the prefix with
length specified by
rcIpBgpTmpAfPathAttrAddrPrefixLen.
Any bits beyond the length specified by
rcIpBgpTmpAfPathAttrAddrPrefixLen are zeroed. InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2272.1.8.101.17.11.1.1.5 |
rcIpBgpTmpNlriPrefixLenLength in bits of the address prefix in
the Network Layer Reachability Information field. InetAddressPrefixLength (INET-ADDRESS-MIB) .1.3.6.1.4.1.2272.1.8.101.17.11.1.1.6 |
rcIpBgpTmpNlriBestAn indication of whether or not this route
was chosen as the best BGP4 route for this
destination.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.101.17.11.1.1.7 |
rcIpBgpTmpNlriCalcLocalPrefThe degree of preference calculated by the
receiving BGP4 speaker for an advertised
route.
In the case where this prefix is ineligible, this
object will be absent.ro Unsigned32 .1.3.6.1.4.1.2272.1.8.101.17.11.1.1.8 |
rcIpBgpTmpAfPathAttrIndexThis value is a unique index for entries in the
rcIpBgpTmpAfPathAttrTable. It is assigned by the agent at the
point of creation of the rcIpBgpTmpAfPathAttrTable row entry.
While its value is guaranteed to be unique at any time,
it is otherwise opaque to the management application
with respect to its value or the contiguity of
rcIpBgpTmpAfPathAttrIndex row instance values across rows of the
rcIpBgpTmpAfPathAttrTable.
Note well that this index is used to distinguish unique
sets of Path Attributes sent as part of BGP NLRI. The
implementor is thus encouraged to make this index unique
per set of all received path attributes. This value may
be used to index tables in extension MIBs that share the
property of belonging to the same received Path Attribute
tuple.ro Unsigned32 .1.3.6.1.4.1.2272.1.8.101.17.11.1.1.9 |
rcIpBgpTmpAfPathAttrUnknownIndexThis value is a unique index for entries in the
rcIpBgpTmpAfPathAttrUnknownTable. It is assigned by the agent at
the point of creation of the rcIpBgpTmpAfPathAttrUnknownTable row
entry. While its value is guaranteed to be unique at
any time, it is otherwise opaque to the management
application with respect to its value or the contiguity
of rcIpBgpTmpAfPathAttrUnknownIndex row instance values across
rows of the rcIpBgpTmpAfPathAttrUnknownTable.ro Unsigned32 .1.3.6.1.4.1.2272.1.8.101.17.11.1.1.10 |
rcIpBgpTmpAfPathAttrCounterThe number of entries in the rcIpBgpTmpAfPathAttrTable.ro Counter32 .1.3.6.1.4.1.2272.1.8.101.17.11.3 |
rcIpBgpTmpAfPathAttrTableProvides per advertised network-prefix attribute data,
as advertised over a peering session. SEQUENCE OF RcIpBgpTmpAfPathAttrEntry .1.3.6.1.4.1.2272.1.8.101.17.11.4 |
rcIpBgpTmpAfPathAttrEntryEach entry contains data about path attributes
associated with a given prefix in the rcIpBgpTmpNlriTable. RcIpBgpTmpAfPathAttrEntry .1.3.6.1.4.1.2272.1.8.101.17.11.4.1 |
rcIpBgpTmpAfPathAttrOriginThe ultimate origin of the path information.ro Enumeration .1.3.6.1.4.1.2272.1.8.101.17.11.4.1.1 |
rcIpBgpTmpAfPathAttrNextHopAddrTypeThe address family of the address for
the border router that should be used
to access the destination network.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2272.1.8.101.17.11.4.1.2 |
rcIpBgpTmpAfPathAttrNextHopAddrThe address of the border router that
should be used to access the destination
network. This address is the nexthop
address received in the UPDATE packet associated with
this prefix.
Note that for RFC2545 style double nexthops,
this object will always contain the global scope
nexthop. bgpPathAttrLinkLocalNextHop will contain
the linklocal scope nexthop, if it is present.
In the case a mechanism is developed to use only a link
local nexthop, rcIpBgpTmpAfPathAttrNextHopAddr will contain the
link local nexthop.ro InetAddress .1.3.6.1.4.1.2272.1.8.101.17.11.4.1.3 |
rcIpBgpTmpAfPathAttrLinkLocalNextHopAddrTypeThe address type for IPv6 link local addresses.
This is present only when receiving RFC 2545
style double nexthops.
This object is optionally present in BGP
implementations that do not support IPv6.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2272.1.8.101.17.11.4.1.4 |
rcIpBgpTmpAfPathAttrLinkLocalNextHopAddrThis value contains an IPv6 link local address
and is present only when receiving RFC 2545 style
double nexthops.
This object is optionally present in BGP
implementations that do not support IPv6.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2272.1.8.101.17.11.4.1.5 |
rcIpBgpTmpAfPathAttrMedPresentThis value is true when the MED value was sent in
the UPDATE message.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.101.17.11.4.1.6 |
rcIpBgpTmpAfPathAttrMedThis metric is used to discriminate between multiple
exit points to an adjacent autonomous system. When the MED
value is absent but has a calculated default value, this
object will contain the calculated value.ro Unsigned32 .1.3.6.1.4.1.2272.1.8.101.17.11.4.1.7 |
rcIpBgpTmpAfPathAttrLocalPrefThe originating BGP4 speakers degree of preference for an
advertised route. If the route was not sent with a LOCAL_PREF
value, this object will be absent.ro Unsigned32 .1.3.6.1.4.1.2272.1.8.101.17.11.4.1.8 |
rcIpBgpTmpAfPathAttrAtomicAggregateWhen this object is set to atomicAggregatePresent,
the ATOMIC_AGGREGATE Path Attribute is present and
indicates that the NLRI MUST NOT be made more
specific.ro Enumeration .1.3.6.1.4.1.2272.1.8.101.17.11.4.1.9 |
rcIpBgpTmpAfPathAttrAggregatorASThe AS number of the last BGP4 speaker that performed route
aggregation. If the AGGREGATOR path attribute is absent, this
object will not be present in the conceptual row.ro InetAutonomousSystemNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.2272.1.8.101.17.11.4.1.10 |
rcIpBgpTmpAfPathAttrAggregatorAddrThe IP address of the last BGP4 speaker that performed route
aggregation. If the AGGREGATOR path attribute is absent, this
object will not be present in the conceptual row.ro RcIpBgpTmpIdentifierTC .1.3.6.1.4.1.2272.1.8.101.17.11.4.1.11 |
rcIpBgpTmpAsPathCalcLengthThis value represents the calculated length of the
AS Path according to the rules of the BGP
specification. This value is used in route selection.ro Unsigned32 .1.3.6.1.4.1.2272.1.8.101.17.11.4.1.12 |
rcIpBgpTmpAsPathIndexThis value is a unique index for the decomposed AS Path
in the rcIpBgpTmpAsPathTable. It is assigned by the
agent at the point of creation of the rcIpBgpTmpAsPathTable
row entry. While its value is guaranteed to be unique
at any time, it is otherwise opaque to the management
application with respect to its value or the contiguity
of rcIpBgpTmpAsPathIndex row instance values across rows
of the rcIpBgpTmpAsPathTable.ro Unsigned32 .1.3.6.1.4.1.2272.1.8.101.17.11.4.1.13 |
rcIpBgpTmpAsPathStringThis is a string depicting the autonomous system
path to this network which was received from the
peer which advertised it. The format of the string
is implementation-dependent, and should be designed
for operator readability.
Note that SnmpAdminString is only capable of
representing a maximum of 255 characters. This may
lead to the string being truncated in the presence of
a large AS Path. The rcIpBgpTmpAsPathTable will give access
to the full AS Path.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.2272.1.8.101.17.11.4.1.14 |
rcIpBgpTmpExtensions OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.8.101.17.12 |
rcIpInterVrfStaticRoute OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.8.103 |
rcIpInterVrfStaticRouteTableSizesize of Ip Static Route Table.ro Integer32 .1.3.6.1.4.1.2272.1.8.103.1 |
rcIpInterVrfStaticRouteTableThis table is used to add static IP routes to
the device. Routes added into this table will
automatically show-up in the 'rcIpRouteTable'
when the device is actively using the route
to forward IP traffic. SEQUENCE OF RcIpInterVrfStaticRouteEntry .1.3.6.1.4.1.2272.1.8.103.2 |
rcIpInterVrfStaticRouteEntryA static route to a particular destination. RcIpInterVrfStaticRouteEntry .1.3.6.1.4.1.2272.1.8.103.2.1 |
rcIpInterVrfStaticRouteOwnerVrfIdOwner VRF id of the static route VrfIdentifier .1.3.6.1.4.1.2272.1.8.103.2.1.1 |
rcIpInterVrfStaticRouteDestThe destination IP address of this route. An
entry with a value of 0.0.0.0 is considered a
default route. Multiple routes to a single
destination can appear in the table, but access to
such multiple entries is dependent on the table-
access mechanisms defined by the network
management protocol in use. IpAddress .1.3.6.1.4.1.2272.1.8.103.2.1.2 |
rcIpInterVrfStaticRouteMaskIndicate the mask to be logical-ANDed with the
destination address before being compared to the
value in the rcIpRouteDest field. For those systems
that do not support arbitrary subnet masks, an
agent constructs the value of the rcIpRouteMask by
determining whether the value of the correspondent
rcIpRouteDest field belong to a class-A, B, or C
network, and then using one of:
mask network
255.0.0.0 class-A
255.255.0.0 class-B
255.255.255.0 class-C
If the value of the rcIpRouteDest is 0.0.0.0 (a
default route), then the mask value is also
0.0.0.0. It should be noted that all IP routing
subsystems implicitly use this mechanism. IpAddress .1.3.6.1.4.1.2272.1.8.103.2.1.3 |
rcIpInterVrfStaticRouteNextHopThe IP address of the next hop of this route.
(In the case of a route bound to an interface
which is realized via a broadcast media, the value
of this field is the agent's IP address on that
interface). IpAddress .1.3.6.1.4.1.2272.1.8.103.2.1.4 |
rcIpInterVrfStaticRouteMetricThe primary routing metric for this route. The
semantics of this metric are determined by the
routing-protocol specified in the route's
rcIpRouteProto value. If this metric is not used,
its value should be set to -1.rw INTEGER (1..'FFFF'h) .1.3.6.1.4.1.2272.1.8.103.2.1.5 |
rcIpInterVrfStaticRouteIfIndexThe index value which uniquely identifies the
local interface through which the next hop of this
route should be reached. The interface identified
by a particular value of this index is the same
interface as identified by the same value of
ifIndex.ro InterfaceIndex .1.3.6.1.4.1.2272.1.8.103.2.1.6 |
rcIpInterVrfStaticRoutePreferenceUsed to indicate the route preference of this
entry. If there are more than one route that can
be used to forward IP traffic, the route that has
a highest preference will be used instead of a
lower preference one. The higher the number, the higher the preference.rw INTEGER .1.3.6.1.4.1.2272.1.8.103.2.1.7 |
rcIpInterVrfStaticRouteEnableUsed to enable/disable this entry.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.103.2.1.8 |
rcIpInterVrfStaticRouteStatusUsed to indicate the current status of
this entry.ro Enumeration .1.3.6.1.4.1.2272.1.8.103.2.1.9 |
rcIpInterVrfStaticRouteRowStatusUsed to create/delete entriesrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.103.2.1.10 |
rcIpInterVrfStaticRouteLocalNextHopUsed to enable/disable this entry. True indicate that the
static route becomes active only if switch has a local route
to the network. False indicates that the static route becomes
active if switch has a local route or dynamic route.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.103.2.1.11 |
rcIpInterVrfStaticRouteNextHopVrfIdUsed to indicate nhVrfId in inter-VRF static-route configurationrw VrfIdentifier .1.3.6.1.4.1.2272.1.8.103.2.1.12 |
rcIpMulticastSquareSmlt OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.8.109 |
rcIpMulticastSquareSmltEnableEnable/Disable multicast Square Smlt.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.109.1 |
rcArp OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.9 |
rcArpExtLifeTimeThe lifetime in minutues of an ARP entry within the
system.rw Integer32 .1.3.6.1.4.1.2272.1.9.1 |
rcArpExtTableARP extension table. This table augments the
standard ipNetToMediaTable defined in RFC1213. SEQUENCE OF RcArpExtEntry .1.3.6.1.4.1.2272.1.9.2 |
rcArpExtEntryEntry containing Proprietary ARP information.
An entry is automatically created in this table
when an ip address is configured on an interface. RcArpExtEntry .1.3.6.1.4.1.2272.1.9.2.1 |
rcArpExtEntIfIndexThe index value which uniquely identifies the
interface to which this entry is applicable.
The interface identified by a particular value
of this index is the same interface as
identified by the same value of ifIndex.ro InterfaceIndex .1.3.6.1.4.1.2272.1.9.2.1.1 |
rcArpExtEntDoProxyEnable or disable ARP proxy responses on the
specified interface.rw Enumeration .1.3.6.1.4.1.2272.1.9.2.1.2 |
rcArpExtEntDoRespEnable or disable the sending of ARP responses
on the specified interface.rw Enumeration .1.3.6.1.4.1.2272.1.9.2.1.3 |
rcArpExtEntDoFloodEnable or disable flooding of ARP responses for
NLBS Virtual Mac on the specified interface.rw Enumeration .1.3.6.1.4.1.2272.1.9.2.1.4 |
rcRip OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.10 |
rcRipExtOperationEnable or disable the operation of RIP on all
Interfaces.rw Enumeration .1.3.6.1.4.1.2272.1.10.1 |
rcRipExtUpdateTimeThe time between transmission of RIP updates
on all interfaces.rw Integer32 .1.3.6.1.4.1.2272.1.10.2 |
rcRipExtTableRIP extension table. This table augments the
standard IfConfTable table in RFC1389. SEQUENCE OF RcRipExtEntry .1.3.6.1.4.1.2272.1.10.3 |
rcRipExtEntryEntry containing Proprietary RIP information.
An entry is automatically created in this table
when an ip address is configured on an interface. RcRipExtEntry .1.3.6.1.4.1.2272.1.10.3.1 |
rcRipExtEntIfIndexThe index value which uniquely identifies the
interface to which this entry is applicable.
The interface identified by a particular value
of this index is the same interface as
identified by the same value of ifIndex.ro InterfaceIndex .1.3.6.1.4.1.2272.1.10.3.1.1 |
rcRipExtEntTalkEnable or disable RIP transmission on the
specified interface.rw Enumeration .1.3.6.1.4.1.2272.1.10.3.1.2 |
rcRipExtEntListenEnable or disable RIP reception on the specified
interface.rw Enumeration .1.3.6.1.4.1.2272.1.10.3.1.3 |
rcRipExtEntPoisonEnable or disable operation of poison reverse
on the specified interface. If poison is
disabled, split-horizon operation is enabled.rw Enumeration .1.3.6.1.4.1.2272.1.10.3.1.4 |
rcTest OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.11 |
rcTestExtTableTest extension table. This table augments the
standard ifTestTable table in RFC1573. SEQUENCE OF RcTestEntry .1.3.6.1.4.1.2272.1.11.1 |
rcTestEntryProprietary test variables. RcTestEntry .1.3.6.1.4.1.2272.1.11.1.1 |
rcTestExtIfIndexThe index value which uniquely identifies the
interface to which this entry is applicable.
The interface identified by a particular value
of this index is the same interface as
identified by the same value of ifIndex.ro InterfaceIndex .1.3.6.1.4.1.2272.1.11.1.1.1 |
rcTestExtPassCountThe number of iterations of the test case that
completed successfully.ro Integer32 .1.3.6.1.4.1.2272.1.11.1.1.2 |
rcTestExtFailCountThe number of iterations of the test case that
failed.ro Integer32 .1.3.6.1.4.1.2272.1.11.1.1.3 |
rcTestTypes OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.11.2 |
rcTestTypesFabric OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.11.2.1 |
rcTestTypesArTable OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.11.2.2 |
rcTestTypesExtLoopBack OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.11.2.3 |
rcTestCodes OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.11.3 |
rcTestCodesNoReceive OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.11.3.1 |
rcTestCodesBadSeq OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.11.3.2 |
rcTestCodesBadLen OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.11.3.3 |
rcTestCodesBadData OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.11.3.4 |
rcStat OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.12 |
rcStatTableA table used to store port statistics. SEQUENCE OF RcStatEntry .1.3.6.1.4.1.2272.1.12.1 |
rcStatEntryinterface counters RcStatEntry .1.3.6.1.4.1.2272.1.12.1.1 |
rcStatPortIndexAn index value that uniquely identifies a port.
This value is similar to ifIndex in MIB2.ro InterfaceIndex .1.3.6.1.4.1.2272.1.12.1.1.1 |
rcStatFrameTooShortsThe total number of frames that are too short
that were encountered on this interface.ro Counter32 .1.3.6.1.4.1.2272.1.12.1.1.2 |
rcStatBridgeInUnicastFramesThe total number of incoming unicast frames that
were bridged.ro Counter32 .1.3.6.1.4.1.2272.1.12.1.1.3 |
rcStatBridgeInMulticastFramesThe total number of incoming multicast frames that
were bridged.ro Counter32 .1.3.6.1.4.1.2272.1.12.1.1.4 |
rcStatBridgeInBroadcastFramesThe total number of incoming broadcast frames that
were bridged.ro Counter32 .1.3.6.1.4.1.2272.1.12.1.1.5 |
rcStatBridgeInDiscardsThe total number of frames that were discarded by
the bridging entity.ro Counter32 .1.3.6.1.4.1.2272.1.12.1.1.6 |
rcStatBridgeOutUnicastFramesThe total number of outgoing unicast frames that
were bridged.ro Counter32 .1.3.6.1.4.1.2272.1.12.1.1.7 |
rcStatBridgeOutMulticastFramesThe total number of outgoing multicast frames that
were bridged.ro Counter32 .1.3.6.1.4.1.2272.1.12.1.1.8 |
rcStatBridgeOutBroadcastFramesThe total number of outgoing broadcast frames that
were bridged.ro Counter32 .1.3.6.1.4.1.2272.1.12.1.1.9 |
rcStatRouteInUnicastFramesThe total number of incoming unicast frames that
were routed.ro Counter32 .1.3.6.1.4.1.2272.1.12.1.1.10 |
rcStatRouteInMulticastFramesThe total number of incoming multicast frames that
were routed.ro Counter32 .1.3.6.1.4.1.2272.1.12.1.1.11 |
rcStatRouteInDiscardsThe total number of frames that were discarded by
the routing entity.ro Counter32 .1.3.6.1.4.1.2272.1.12.1.1.12 |
rcStatRouteOutUnicastFramesThe total number of outgoing unicast frames that
were routed.ro Counter32 .1.3.6.1.4.1.2272.1.12.1.1.13 |
rcStatRouteOutMulticastFramesThe total number of outgoing multicast frames that
were routed.ro Counter32 .1.3.6.1.4.1.2272.1.12.1.1.14 |
rcStatStgForwardTransitionsThe number of times this port has transitioned
from the Learning state to the Forwarding state.ro Counter32 .1.3.6.1.4.1.2272.1.12.1.1.15 |
rcStatStgInConfigBpdusro Counter32 .1.3.6.1.4.1.2272.1.12.1.1.16 |
rcStatStgInTcnBpdusro Counter32 .1.3.6.1.4.1.2272.1.12.1.1.17 |
rcStatStgInBadBpdusro Counter32 .1.3.6.1.4.1.2272.1.12.1.1.18 |
rcStatStgOutConfigBpdusro Counter32 .1.3.6.1.4.1.2272.1.12.1.1.19 |
rcStatStgOutTcnBpdusro Counter32 .1.3.6.1.4.1.2272.1.12.1.1.20 |
rcStatBridgeOutFramesUsed by the Accelar 8000 product family to account
for all transmitted bridge unicast, broadcast, and
multicast packets. The individual counters are not
supported.ro Counter32 .1.3.6.1.4.1.2272.1.12.1.1.21 |
rcStatPolicerTotalBytesThe total number of bytes received on the
interface.ro Counter64 .1.3.6.1.4.1.2272.1.12.1.1.25 |
rcStatPolicerTotalPktsThe total number of packets received on the
interface.ro Counter64 .1.3.6.1.4.1.2272.1.12.1.1.26 |
rcStatPolicerGreenBytesThe total number of bytes received on the
interface that were below the committed rate.ro Counter64 .1.3.6.1.4.1.2272.1.12.1.1.27 |
rcStatPolicerYellowBytesThe total number of bytes received on the
interface that were above the committed rate
but below the peak rate.ro Counter64 .1.3.6.1.4.1.2272.1.12.1.1.28 |
rcStatPolicerRedBytesThe total number of bytes received on the
interface that were above the peak rate.ro Counter64 .1.3.6.1.4.1.2272.1.12.1.1.29 |
rcStatGigTableA table used to store Gigport error statistics. SEQUENCE OF RcStatGigEntry .1.3.6.1.4.1.2272.1.12.2 |
rcStatGigEntryGigabit interface error counters RcStatGigEntry .1.3.6.1.4.1.2272.1.12.2.1 |
rcStatGigPortIndexAn index value that uniquely identifies a port.
This value is similar to ifIndex in MIB2.ro InterfaceIndex .1.3.6.1.4.1.2272.1.12.2.1.1 |
rcStatGigLinkFailuresThe total number of link failures encountered on
this interface.ro Counter32 .1.3.6.1.4.1.2272.1.12.2.1.2 |
rcStatGigPacketErrorsThe total number of packet errors encountered on
this interface.ro Counter32 .1.3.6.1.4.1.2272.1.12.2.1.3 |
rcStatGigCarrierErrorsThe total number of carrier errors encountered on
this interface.ro Counter32 .1.3.6.1.4.1.2272.1.12.2.1.4 |
rcStatGigLinkInactiveErrorsThe total number of link inactive errors encountered
on this interface.ro Counter32 .1.3.6.1.4.1.2272.1.12.2.1.5 |
rcStatGigInFlowCtrlPktsThe total number of flow control packets received
by this interface.rodeprecated Counter32 .1.3.6.1.4.1.2272.1.12.2.1.6 |
rcStatGigOutFlowCtrlPktsThe total number of flow control packets transmitted
by this interface.rodeprecated Counter32 .1.3.6.1.4.1.2272.1.12.2.1.7 |
rcStatGigHCInPfcPktsThe total number of Priority Flow Control (PFC)
packets received by this interface.ro Counter64 .1.3.6.1.4.1.2272.1.12.2.1.8 |
rcStatGigHCOutPfcPktsThe total number of Priority Flow Control (PFC)
packets transmitted by this interface.ro Counter64 .1.3.6.1.4.1.2272.1.12.2.1.9 |
rcStatGigHCInFlowCtrlPktsThe total number of flow control packets received
by this interface.ro Counter64 .1.3.6.1.4.1.2272.1.12.2.1.10 |
rcStatGigHCOutFlowCtrlPktsThe total number of flow control packets transmitted
by this interface.ro Counter64 .1.3.6.1.4.1.2272.1.12.2.1.11 |
rcStatOspf OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.12.3 |
rcStatOspfBuffersAllocatedUsed to indicate the number of buffers
allocated for OSPF.ro Counter32 .1.3.6.1.4.1.2272.1.12.3.1 |
rcStatOspfBuffersFreedUsed to indicate the number of buffers
that are freed by the OSPF.ro Counter32 .1.3.6.1.4.1.2272.1.12.3.2 |
rcStatOspfBufferAllocFailuresUsed to indicate the number of times
that OSPF has failed to allocate buffers.ro Counter32 .1.3.6.1.4.1.2272.1.12.3.3 |
rcStatOspfBufferFreeFailuresUsed to indicate the number of times
that OSPF has failed to free buffers.ro Counter32 .1.3.6.1.4.1.2272.1.12.3.4 |
rcStatOspfTxPacketsUsed to indicate the number of packets
transmitted by OSPF.ro Counter32 .1.3.6.1.4.1.2272.1.12.3.5 |
rcStatOspfRxPacketsUsed to indicate the number of packets
received by OSPF.ro Counter32 .1.3.6.1.4.1.2272.1.12.3.6 |
rcStatOspfTxDropPacketsUsed to indicate the number of packets
dropped before transmitted by OSPF.ro Counter32 .1.3.6.1.4.1.2272.1.12.3.7 |
rcStatOspfRxDropPacketsUsed to indicate the number of packets
dropped before received by OSPF.ro Counter32 .1.3.6.1.4.1.2272.1.12.3.8 |
rcStatOspfRxBadPacketsUsed to indicate the number of packets
received by OSPF that are bad.ro Counter32 .1.3.6.1.4.1.2272.1.12.3.9 |
rcStatOspfSpfRunsUsed to indicate the total number of SPF
calculatations performed by OSPF, which
also includes the number of partial route
table calculation for Incremental Updates.ro Counter32 .1.3.6.1.4.1.2272.1.12.3.10 |
rcStatOspfLastSpfRunUsed to indicate the time(SysUpTime) since
the last spf calculated by OSPF.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2272.1.12.3.11 |
rcStatOspfLsdbTblSizeUsed to indicate the number of entries in
the linkstate database table.ro Counter32 .1.3.6.1.4.1.2272.1.12.3.12 |
rcStatOspfRoutesUsed to indicate the number of OSPF routes
added to RTM.ro Counter32 .1.3.6.1.4.1.2272.1.12.3.13 |
rcStatOspfAdjacenciesUsed to indicate the number of adjacencies
existing.ro Counter32 .1.3.6.1.4.1.2272.1.12.3.14 |
rcStatOspfAreasUsed to indicate the number of areas configuredro Counter32 .1.3.6.1.4.1.2272.1.12.3.15 |
rcStatIgmp OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.12.4 |
rcStatIgmpInMsgsUsed to indicate the number of Igmp packets
received by the device.ro Counter32 .1.3.6.1.4.1.2272.1.12.4.1 |
rcStatIgmpInErrorsUsed to indicate the number of Igmp packets
received that are with checksum errors.ro Counter32 .1.3.6.1.4.1.2272.1.12.4.2 |
rcStatIgmpInQueriesUsed to indicate the number of Igmp queries
received by the device.ro Counter32 .1.3.6.1.4.1.2272.1.12.4.3 |
rcStatIgmpInReportsUsed to indicate the number of Igmp reports
received by the device.ro Counter32 .1.3.6.1.4.1.2272.1.12.4.4 |
rcStatIgmpInLeavesUsed to indicate the number of Igmp Leaves
received by the device.ro Counter32 .1.3.6.1.4.1.2272.1.12.4.5 |
rcStatIgmpInvalidUsed to indicate the number of Igmp packets
received by the device that contained invalid
type.ro Counter32 .1.3.6.1.4.1.2272.1.12.4.6 |
rcStatIgmpOutMsgsUsed to indicate the number of Igmp queries
sent by the device.ro Counter32 .1.3.6.1.4.1.2272.1.12.4.7 |
rcStatOspfIfTableA table used to store OSPF interface
statistics. SEQUENCE OF RcStatOspfIfEntry .1.3.6.1.4.1.2272.1.12.5 |
rcStatOspfIfEntryOspf interface statistics RcStatOspfIfEntry .1.3.6.1.4.1.2272.1.12.5.1 |
rcStatOspfIfIndexAn unique value that is used to identify a
physical interface.ro InterfaceIndexOrZero .1.3.6.1.4.1.2272.1.12.5.1.1 |
rcStatOspfIfRxHellosUsed to indicate the number hello packets
received by this interface.ro Counter32 .1.3.6.1.4.1.2272.1.12.5.1.2 |
rcStatOspfIfRxDBDescrsUsed to indicate the number database descriptor
packets received by this interface.ro Counter32 .1.3.6.1.4.1.2272.1.12.5.1.3 |
rcStatOspfIfRxLSUpdatesUsed to indicate the number Link state update
packets received by this interface.ro Counter32 .1.3.6.1.4.1.2272.1.12.5.1.4 |
rcStatOspfIfRxLSReqsUsed to indicate the number Link state request
packets received by this interface.ro Counter32 .1.3.6.1.4.1.2272.1.12.5.1.5 |
rcStatOspfIfRxLSAcksUsed to indicate the number Link state acknowlege
packets received by this interface.ro Counter32 .1.3.6.1.4.1.2272.1.12.5.1.6 |
rcStatOspfIfTxHellosUsed to indicate the number hello packets
transmitted by this interface.ro Counter32 .1.3.6.1.4.1.2272.1.12.5.1.7 |
rcStatOspfIfTxDBDescrsUsed to indicate the number database descriptor
packets transmitted by this interface.ro Counter32 .1.3.6.1.4.1.2272.1.12.5.1.8 |
rcStatOspfIfTxLSUpdatesUsed to indicate the number Link state update
packets transmitted by this interface.ro Counter32 .1.3.6.1.4.1.2272.1.12.5.1.9 |
rcStatOspfIfTxLSReqsUsed to indicate the number Link state request
packets transmitted by this interface.ro Counter32 .1.3.6.1.4.1.2272.1.12.5.1.10 |
rcStatOspfIfTxLSAcksUsed to indicate the number Link state acknowlege
packets transmitted by this interface.ro Counter32 .1.3.6.1.4.1.2272.1.12.5.1.11 |
rcStatOspfIfVersionMismatchesUsed to indicate the number version
mismatches received by this interface.ro Counter32 .1.3.6.1.4.1.2272.1.12.5.1.12 |
rcStatOspfIfAreaMismatchesUsed to indicate the number area
mismatches received by this interface.ro Counter32 .1.3.6.1.4.1.2272.1.12.5.1.13 |
rcStatOspfIfAuthTypeMismatchesUsed to indicate the number AuthType
mismatches received by this interface.ro Counter32 .1.3.6.1.4.1.2272.1.12.5.1.14 |
rcStatOspfIfAuthFailuresUsed to indicate the number Authentication
failures.ro Counter32 .1.3.6.1.4.1.2272.1.12.5.1.15 |
rcStatOspfIfNetMaskMismatchesUsed to indicate the number net mask
mismatches received by this interface.ro Counter32 .1.3.6.1.4.1.2272.1.12.5.1.16 |
rcStatOspfIfHelloIntervalMismatchesUsed to indicate the number hello interval
mismatches received by this interface.ro Counter32 .1.3.6.1.4.1.2272.1.12.5.1.17 |
rcStatOspfIfDeadIntervalMismatchesUsed to indicate the number dead interval
mismatches received by this interface.ro Counter32 .1.3.6.1.4.1.2272.1.12.5.1.18 |
rcStatOspfIfOptionMismatchesUsed to indicate the number options
mismatches received by this interface.ro Counter32 .1.3.6.1.4.1.2272.1.12.5.1.19 |
rcStatMlt OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.12.6 |
rcStatMltIfExtnTableA table used to store Mlt interface
statistics. SEQUENCE OF RcStatMltIfExtnEntry .1.3.6.1.4.1.2272.1.12.6.1 |
rcStatMltIfExtnEntryMlt interface statistics RcStatMltIfExtnEntry .1.3.6.1.4.1.2272.1.12.6.1.1 |
rcStatMltIfExtnMltIdMlt Idro INTEGER .1.3.6.1.4.1.2272.1.12.6.1.1.1 |
rcStatMltIfExtnIfInMulticastPktsmulti-pkts to upperro Counter32 .1.3.6.1.4.1.2272.1.12.6.1.1.2 |
rcStatMltIfExtnIfInBroadcastPktsbroad-pkts to upperro Counter32 .1.3.6.1.4.1.2272.1.12.6.1.1.3 |
rcStatMltIfExtnIfOutMulticastPktsmulti-pkts from upperro Counter32 .1.3.6.1.4.1.2272.1.12.6.1.1.4 |
rcStatMltIfExtnIfOutBroadcastPktsbroad-pkts from upperro Counter32 .1.3.6.1.4.1.2272.1.12.6.1.1.5 |
rcStatMltIfExtnIfHCInOctetsThe total number of octets received
on the MLT interface, including framing
characters.ro Counter64 .1.3.6.1.4.1.2272.1.12.6.1.1.6 |
rcStatMltIfExtnIfHCInUcastPktsThe number of packets delivered by this
MLT to a higher MLT that were not addressed
to a nulticast or broadcase address at this
sublayer.ro Counter64 .1.3.6.1.4.1.2272.1.12.6.1.1.7 |
rcStatMltIfExtnIfHCInMulticastPktThe number of packets delivered to this MLT that
were addressed to a nulticast address at this
sublayer. For a MAC layer protocol, this number
includes both Group and Functional addresses.ro Counter64 .1.3.6.1.4.1.2272.1.12.6.1.1.8 |
rcStatMltIfExtnIfHCInBroadcastPktThe number of packets delivered to this MLT that
were addressed to a broadcast address at this
sublayer.ro Counter64 .1.3.6.1.4.1.2272.1.12.6.1.1.9 |
rcStatMltIfExtnIfHCOutOctetsThe total number of octets transmitted
out of the MLT interface, including
framing characters.ro Counter64 .1.3.6.1.4.1.2272.1.12.6.1.1.10 |
rcStatMltIfExtnIfHCOutUcastPktsThe number of packets that hight-level protocols
requested be transmitted that were not addressed
to a multicast address at this MLT. This total
number includes those packets discarded or unsent.ro Counter64 .1.3.6.1.4.1.2272.1.12.6.1.1.11 |
rcStatMltIfExtnIfHCOutMulticastThe total number of packets that hight-level
protocols requested be transmitted, and that
were addressed to a multicast address at this
MLT, including those that were discarded or
not sent. For a MAC layer protocol, this
number includes both Group and Functional
addresses.ro Counter64 .1.3.6.1.4.1.2272.1.12.6.1.1.12 |
rcStatMltIfExtnIfHCOutBroadcastThe total number of packets that hight-level
protocols requested be transmitted, and that
were addressed to a broadcase address at this
MLT, including those that were discarded or
not sent.ro Counter64 .1.3.6.1.4.1.2272.1.12.6.1.1.13 |
rcStatMltIfExtnIfHCInLsmPktsThe total number of Link State Messaging (LSM)
packets delivered to this MLT.ro Counter64 .1.3.6.1.4.1.2272.1.12.6.1.1.14 |
rcStatMltIfExtnIfHCOutLsmPktsThe total number of Link State Messaging (LSM)
packets trasmitted on this MLT.ro Counter64 .1.3.6.1.4.1.2272.1.12.6.1.1.15 |
rcStatMltEtherTableA table used to store Mlt Ethernet
statistics. SEQUENCE OF RcStatMltEtherEntry .1.3.6.1.4.1.2272.1.12.6.2 |
rcStatMltEtherEntryMlt enternet statistics RcStatMltEtherEntry .1.3.6.1.4.1.2272.1.12.6.2.1 |
rcStatMltEtherMltIdA value that uniquely identifies the Multi-Link
Trunk associated with this entry.ro INTEGER .1.3.6.1.4.1.2272.1.12.6.2.1.1 |
rcStatMltEtherAlignmentErrorsA count of frames received on a particular MLT
that are not an integral number of octets in
length and do not pass the FCS check. The count
represented by an instance of this object is
incremented when the alignmentError status is
returned by the MAC service to the LLC (or other
MAC user). Received frames for which multiple
error conditions occur are, according to the
conventions of IEEE 802.3 Layer Management,
counted exclusively according to the error status
presented to the LLC.ro Counter32 .1.3.6.1.4.1.2272.1.12.6.2.1.2 |
rcStatMltEtherFCSErrorsA count of frames received on an MLT that are an
integral number of octets in length but do not pass
the FCS check. The count represented by an instance
of this object is incremented when the frameCheckError
status is returned by the MAC service to the LLC
(or other MAC user). Received frames for which
multiple error conditions occur are, according to
the conventions of IEEE 802.3 Layer Management,
counted exclusively according to the error status
presented to the LLC.ro Counter32 .1.3.6.1.4.1.2272.1.12.6.2.1.3 |
rcStatMltEtherSingleCollFramesA count of successfully transmitted frames on
a particular MLT for which transmission is
inhibited by exactly one collision. A frame
that is counted by an instance of this objects
is also counted by the corresponding instance
of either the ifOutUcastPkts, ifOutMulticastPkts,
or ifOutBroadcastPkts, and it not counted by the
corresponding instance of the MultipleCollisionFrames
object.ro Counter32 .1.3.6.1.4.1.2272.1.12.6.2.1.4 |
rcStatMltEtherMultipleCollFramesA count of successfully transmitted frames on
a particular MLT for which transmission is
inhibited by more than one collision. A frame
that is counted by an instance of this object
is also counted by the corresponding instance
of either the ifOutUcastPkts, ifOutMulticastPkts,
or ifOutBroadcastPkts, and is not counted by the
corresponding instance of the SingleCollisionFrames
objects.ro Counter32 .1.3.6.1.4.1.2272.1.12.6.2.1.5 |
rcStatMltEtherSQETestErrorA count of times that the SQE TEST ERROR message
is generated by the PLS sublayer for a particular
MLT. SQE stands for Signal Quality Error.ro Counter32 .1.3.6.1.4.1.2272.1.12.6.2.1.6 |
rcStatMltEtherDeferredTransmissA count of frames for which the first transmission
attempt on a particular MLT is delayed because the
medium is busy. The count represented by an
instance of this object does not include frames
involved in collisions.ro Counter32 .1.3.6.1.4.1.2272.1.12.6.2.1.7 |
rcStatMltEtherLateCollisionsThe number of times that a collision is detected
on a particular MLT later than 512 bit-times
(64 octets) into the transmission of a packet.
Five hundred and twelve bit-times corresponds to
51.2 microseconds on a 10 mb/s system. A (late)
collision included in a count represented by an
instance of this object is also considered as a
(generic) collision for purposes of other
collision-related statistics.ro Counter32 .1.3.6.1.4.1.2272.1.12.6.2.1.8 |
rcStatMltEtherExcessiveCollisA count of frames for which transmission on a
particular MLT fails due to excessive collisions.ro Counter32 .1.3.6.1.4.1.2272.1.12.6.2.1.9 |
rcStatMltEtherIMacTransmitErrorA count of frames for which transmission on a
particular MLT fails due to an internal MAC
sublayer transmit error. A frame is only counted
by an instance of this object if it is not counted
by the corresponding instance of either the
LateCollisions object, the ExcessiveCollisions
object, or the CarrierSenseError object.ro Counter32 .1.3.6.1.4.1.2272.1.12.6.2.1.10 |
rcStatMltEtherCarrierSenseErrorThe number of times that the carrier sense
condition was lost or never asserted when
attempting to transmit a frame on a particular
MLT. The count represented by an instance of
this object is incremented at most once per
transmission attempt, even if the carrier
sense condition fluctuates during a
transmission attempt.ro Counter32 .1.3.6.1.4.1.2272.1.12.6.2.1.11 |
rcStatMltEtherFrameTooLongA count of frames received on a particular MLT
that exceed the maximum permitted size (1518
octets). The count represented by an instance
os this object is incremented when the frame
TooLong status is returned by the MAC service
to the LLC (or other MAC user). Received frames
for which multiple error conditions occur are,
according to the conventions of IEEE 802.3
Layer Management, counted exclusively according
to the error status presented to the LLC.ro Counter32 .1.3.6.1.4.1.2272.1.12.6.2.1.12 |
rcStatMltEtherIMacReceiveErrorA count of frames for which reception on a
particular MLT fails due to an internal MAC
sublayer receive error. A frame is only
counted by an instance of this object if it
is not counted by the corresponding instance
of either the FrameTooLongs object, the
AlignmentErrors object, of the FCSErrors
objects.
The precise meaning of the count represented
by an instance of this object is implementation
specific. In particular, an instance of this
object may represent a count of receive errors
on a particular interface that are not otherwise
counted.ro Counter32 .1.3.6.1.4.1.2272.1.12.6.2.1.13 |
rcStatSmltIstDownCntCounters that counts how the session between the
two peering switches has done down since last boot.ro Counter32 .1.3.6.1.4.1.2272.1.12.6.4 |
rcStatSmltHelloTxMsgCntCounters that counts the tx hello msg.ro Counter32 .1.3.6.1.4.1.2272.1.12.6.5 |
rcStatSmltHelloRxMsgCntCounters that counts the rx hello msg.ro Counter32 .1.3.6.1.4.1.2272.1.12.6.6 |
rcStatSmltLearnMacAddrTxMsgCntCounters that counts the tx learn Mac Address msg.ro Counter32 .1.3.6.1.4.1.2272.1.12.6.7 |
rcStatSmltLearnMacAddrRxMsgCntCounters that counts the rx learn Mac Address msg.ro Counter32 .1.3.6.1.4.1.2272.1.12.6.8 |
rcStatSmltMacAddrAgeOutTxMsgCntCounters that counts the tx Mac Address Aging Out msg.ro Counter32 .1.3.6.1.4.1.2272.1.12.6.9 |
rcStatSmltMacAddrAgeOutRxMsgCntCounters that counts the rx Mac Address Aging Out msg.ro Counter32 .1.3.6.1.4.1.2272.1.12.6.10 |
rcStatSmltMacAddrAgeExpTxMsgCntCounters that counts the tx Mac Address age expired msg.ro Counter32 .1.3.6.1.4.1.2272.1.12.6.11 |
rcStatSmltMacAddrAgeExpRxMsgCntCounters that counts the rx Mac Address age expired msg.ro Counter32 .1.3.6.1.4.1.2272.1.12.6.12 |
rcStatSmltStgInfoTxMsgCntCounters that counts the tx Stg information msg.ro Counter32 .1.3.6.1.4.1.2272.1.12.6.13 |
rcStatSmltStgInfoRxMsgCntCounters that counts the rx Stg information msg.ro Counter32 .1.3.6.1.4.1.2272.1.12.6.14 |
rcStatSmltDelMacAddrTxMsgCntCounters that counts the tx deleted MAC address msg.ro Counter32 .1.3.6.1.4.1.2272.1.12.6.15 |
rcStatSmltDelMacAddrRxMsgCntCounters that counts the rx deleted MAC address msg.ro Counter32 .1.3.6.1.4.1.2272.1.12.6.16 |
rcStatSmltSmltDownTxMsgCntCounters that counts the tx Smlt Down msg.ro Counter32 .1.3.6.1.4.1.2272.1.12.6.17 |
rcStatSmltSmltDownRxMsgCntCounters that counts the rx Smlt Down msg.ro Counter32 .1.3.6.1.4.1.2272.1.12.6.18 |
rcStatSmltSmltUpTxMsgCntCounters that counts the tx Smlt Up msg.ro Counter32 .1.3.6.1.4.1.2272.1.12.6.19 |
rcStatSmltSmltUpRxMsgCntCounters that counts the rx Smlt Up msg.ro Counter32 .1.3.6.1.4.1.2272.1.12.6.20 |
rcStatSmltSendMacTblTxMsgCntCounters that counts the tx Send Mac Table msg.ro Counter32 .1.3.6.1.4.1.2272.1.12.6.21 |
rcStatSmltSendMacTblRxMsgCntCounters that counts the rx Send Mac Table msg.ro Counter32 .1.3.6.1.4.1.2272.1.12.6.22 |
rcStatSmltIgmpTxMsgCntCounters that counts the tx Igmp msg.ro Counter32 .1.3.6.1.4.1.2272.1.12.6.23 |
rcStatSmltIgmpRxMsgCntCounters that counts the rx Igmp msg.ro Counter32 .1.3.6.1.4.1.2272.1.12.6.24 |
rcStatSmltPortDownTxMsgCntCounters that counts the tx port down msg.ro Counter32 .1.3.6.1.4.1.2272.1.12.6.25 |
rcStatSmltPortDownRxMsgCntCounters that counts the rx port down msg.ro Counter32 .1.3.6.1.4.1.2272.1.12.6.26 |
rcStatSmltReqMacTblTxMsgCntCounters that counts the tx request Mac table msg.ro Counter32 .1.3.6.1.4.1.2272.1.12.6.27 |
rcStatSmltReqMacTblRxMsgCntCounters that counts the rx request Mac table msg.ro Counter32 .1.3.6.1.4.1.2272.1.12.6.28 |
rcStatSmltRxUnknownMsgTypeCntCounters that counts the rx unknown msg type.ro Counter32 .1.3.6.1.4.1.2272.1.12.6.29 |
rcStatMulticast OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.12.9 |
rcStatMulticastSourceGroupThresholdExceededThe count of number of times the threshold of
available IP Multicast (Source,Group) Records was
reached. When this threshold is reached, a new IP
Multicast stream ingressing the switch cannot be
forwarded.ro Counter32 .1.3.6.1.4.1.2272.1.12.9.1 |
rcStatMulticastEgressStreamThresholdExceededThe count of number of times the threshold of
available IP Multicast Egress Forwarding Records was
reached. When this threshold is reached, a new IP
Multicast Receiver that needs new Egress Forwarding
Record (PepStrem Record) will not be programmed to
receive the subscribing multicast stream.ro Counter32 .1.3.6.1.4.1.2272.1.12.9.2 |
rcStatBgp OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.12.10 |
rcStatBgpStartsNumber of times BGP connection startedro Counter32 .1.3.6.1.4.1.2272.1.12.10.1 |
rcStatBgpStopsNumber of times BGP connection stoppedro Counter32 .1.3.6.1.4.1.2272.1.12.10.2 |
rcStatBgpOpensNumber of times BGP opens TCPro Counter32 .1.3.6.1.4.1.2272.1.12.10.3 |
rcStatBgpClosesNumber of times BGP closes TCPro Counter32 .1.3.6.1.4.1.2272.1.12.10.4 |
rcStatBgpFailsNumber of times TCP attempts failedro Counter32 .1.3.6.1.4.1.2272.1.12.10.5 |
rcStatBgpFatalsNumber of times TCP crashes due to fatal errorro Counter32 .1.3.6.1.4.1.2272.1.12.10.6 |
rcStatBgpConnExpsNumber of times TCP retry timer expiredro Counter32 .1.3.6.1.4.1.2272.1.12.10.7 |
rcStatBgpHoldExpsNumber of times hold timer expiredro Counter32 .1.3.6.1.4.1.2272.1.12.10.8 |
rcStatBgpKeepExpsNumber of times keepalive timer expiredro Counter32 .1.3.6.1.4.1.2272.1.12.10.9 |
rcStatBgpRxOpensNumber of OPENs BGP receivesro Counter32 .1.3.6.1.4.1.2272.1.12.10.10 |
rcStatBgpRxKeepsNumber of KEEPALIVEs BGP recievesro Counter32 .1.3.6.1.4.1.2272.1.12.10.11 |
rcStatBgpRxUpdatesNumber of UPDATEs BGP recievesro Counter32 .1.3.6.1.4.1.2272.1.12.10.12 |
rcStatBgpRxNotifysNumber NOTIFICATIONs BGP recievesro Counter32 .1.3.6.1.4.1.2272.1.12.10.13 |
rcStatBgpTxOpensNumber of OPENs BGP transmittedro Counter32 .1.3.6.1.4.1.2272.1.12.10.14 |
rcStatBgpTxKeepsNumber of KEEPALIVEs BGP transmittedro Counter32 .1.3.6.1.4.1.2272.1.12.10.15 |
rcStatBgpTxUpdatesNumber of UPDATEs BGP transmitsro Counter32 .1.3.6.1.4.1.2272.1.12.10.16 |
rcStatBgpTxNotifysNumber of NOTIFICATIONs BGP transmitsro Counter32 .1.3.6.1.4.1.2272.1.12.10.17 |
rcStatBgpBadEventsNumber of invalid events FSM receivedro Counter32 .1.3.6.1.4.1.2272.1.12.10.18 |
rcStatBgpSyncFailsNumber of times FDB sync failedro Counter32 .1.3.6.1.4.1.2272.1.12.10.19 |
rcStatBgpTrEventTrace eventro Counter32 .1.3.6.1.4.1.2272.1.12.10.20 |
rcStatBgpRxECodeHeaderTotal Header errors receivedro Counter32 .1.3.6.1.4.1.2272.1.12.10.21 |
rcStatBgpRxECodeOpenTotal Open errors receivedro Counter32 .1.3.6.1.4.1.2272.1.12.10.22 |
rcStatBgpRxECodeUpdateTotal Update errors receivedro Counter32 .1.3.6.1.4.1.2272.1.12.10.23 |
rcStatBgpRxECodeHoldtimerTotal Holdtimer errors receivedro Counter32 .1.3.6.1.4.1.2272.1.12.10.24 |
rcStatBgpRxECodeFSMTotal FSM errors receivedro Counter32 .1.3.6.1.4.1.2272.1.12.10.25 |
rcStatBgpRxECodeCeaseTotal Cease errors receivedro Counter32 .1.3.6.1.4.1.2272.1.12.10.26 |
rcStatBgpRxHdrCodeNoSyncHeader Not Synchronized errors receivedro Counter32 .1.3.6.1.4.1.2272.1.12.10.27 |
rcStatBgpRxHdrCodeInvalidMsgLenHeader Invalid msg len errors receivedro Counter32 .1.3.6.1.4.1.2272.1.12.10.28 |
rcStatBgpRxHdrCodeInvalidMsgTypeHeader Invalid msg type errors receivedro Counter32 .1.3.6.1.4.1.2272.1.12.10.29 |
rcStatBgpRxOpCodeBadVerOpen errors received: Bad Versionro Counter32 .1.3.6.1.4.1.2272.1.12.10.30 |
rcStatBgpRxOpCodeBadAsOpen errors received: Bad AS Numberro Counter32 .1.3.6.1.4.1.2272.1.12.10.31 |
rcStatBgpRxOpCodeBadRtIDOpen errors received: Bad BGP Rtr IDro Counter32 .1.3.6.1.4.1.2272.1.12.10.32 |
rcStatBgpRxOpCodeUnsuppOptionOpen errors received: Unsupported Optionro Counter32 .1.3.6.1.4.1.2272.1.12.10.33 |
rcStatBgpRxOpCodeAuthFailOpen errors received: Auth Failuresro Counter32 .1.3.6.1.4.1.2272.1.12.10.34 |
rcStatBgpRxOpCodeBadHoldOpen errors received: Bad Hold Valuero Counter32 .1.3.6.1.4.1.2272.1.12.10.35 |
rcStatBgpRxUpdCodeMalformedAttrListUpdate errors received:Malformed Attr Listro Counter32 .1.3.6.1.4.1.2272.1.12.10.36 |
rcStatBgpRxUpdCodeWelknownAttrUnrecogUpdate errors received: Welknown Attr Unrecogro Counter32 .1.3.6.1.4.1.2272.1.12.10.37 |
rcStatBgpRxUpdCodeWelknownAttrMissUpdate errors received: Welknown Attr Missingro Counter32 .1.3.6.1.4.1.2272.1.12.10.38 |
rcStatBgpRxUpdCodeAttrFlagErrorUpdate errors received: Attr Flag Errorro Counter32 .1.3.6.1.4.1.2272.1.12.10.39 |
rcStatBgpRxUpdCodeAttrLenErrorUpdate errors received: Attr Len Errorro Counter32 .1.3.6.1.4.1.2272.1.12.10.40 |
rcStatBgpRxUpdCodeBadORIGINAttrUpdate errors received: Bad ORIGIN Attrro Counter32 .1.3.6.1.4.1.2272.1.12.10.41 |
rcStatBgpRxUpdCodeASRoutingLoopUpdate errors received: AS Routing Loopro Counter32 .1.3.6.1.4.1.2272.1.12.10.42 |
rcStatBgpRxUpdCodeBadNHAttrUpdate errors received: Bad NEXT-HOP Attrro Counter32 .1.3.6.1.4.1.2272.1.12.10.43 |
rcStatBgpRxUpdCodeOptionalAttrErrorUpdate errors received: Optional Attr Errorro Counter32 .1.3.6.1.4.1.2272.1.12.10.44 |
rcStatBgpRxUpdCodeBadNetworkFieldUpdate errors received: Bad Network Fieldro Counter32 .1.3.6.1.4.1.2272.1.12.10.45 |
rcStatBgpRxUpdCodeMalformedASPathUpdate errors received: Malformed AS Pathro Counter32 .1.3.6.1.4.1.2272.1.12.10.46 |
rcStatBgpTxECodeHeaderTotal Header errors transmittedro Counter32 .1.3.6.1.4.1.2272.1.12.10.47 |
rcStatBgpTxECodeOpenTotal Open errors transmittedro Counter32 .1.3.6.1.4.1.2272.1.12.10.48 |
rcStatBgpTxECodeUpdateTotal Update errors transmittedro Counter32 .1.3.6.1.4.1.2272.1.12.10.49 |
rcStatBgpTxECodeHoldtimerTotal Holdtimer errors transmittedro Counter32 .1.3.6.1.4.1.2272.1.12.10.50 |
rcStatBgpTxECodeFSMTotal FSM errors transmittedro Counter32 .1.3.6.1.4.1.2272.1.12.10.51 |
rcStatBgpTxECodeCeaseTotal Cease errors transmittedro Counter32 .1.3.6.1.4.1.2272.1.12.10.52 |
rcStatBgpTxHdrCodeNoSyncHeader Not Synchronized errors transmittedro Counter32 .1.3.6.1.4.1.2272.1.12.10.53 |
rcStatBgpTxHdrCodeInvalidMsgLenHeader Invalid msg len errors transmittedro Counter32 .1.3.6.1.4.1.2272.1.12.10.54 |
rcStatBgpTxHdrCodeInvalidMsgTypeHeader Invalid msg type errors transmittedro Counter32 .1.3.6.1.4.1.2272.1.12.10.55 |
rcStatBgpTxOpCodeBadVerOpen errors transmitted: Bad Versionro Counter32 .1.3.6.1.4.1.2272.1.12.10.56 |
rcStatBgpTxOpCodeBadAsOpen errors transmitted: Bad AS Numberro Counter32 .1.3.6.1.4.1.2272.1.12.10.57 |
rcStatBgpTxOpCodeBadRtIDOpen errors transmitted: Bad BGP Rtr IDro Counter32 .1.3.6.1.4.1.2272.1.12.10.58 |
rcStatBgpTxOpCodeUnsuppOptionOpen errors transmitted: Unsupported Optionro Counter32 .1.3.6.1.4.1.2272.1.12.10.59 |
rcStatBgpTxOpCodeAuthFailOpen errors transmitted: Auth Failuresro Counter32 .1.3.6.1.4.1.2272.1.12.10.60 |
rcStatBgpTxOpCodeBadHoldOpen errors transmitted: Bad Hold Valuero Counter32 .1.3.6.1.4.1.2272.1.12.10.61 |
rcStatBgpTxUpdCodeMalformedAttrListUpdate errors transmitted:Malformed Attr Listro Counter32 .1.3.6.1.4.1.2272.1.12.10.62 |
rcStatBgpTxUpdCodeWelknownAttrUnrecogUpdate errors transmitted: Welknown Attr Unrecogro Counter32 .1.3.6.1.4.1.2272.1.12.10.63 |
rcStatBgpTxUpdCodeWelknownAttrMissUpdate errors transmitted: Welknown Attr Missingro Counter32 .1.3.6.1.4.1.2272.1.12.10.64 |
rcStatBgpTxUpdCodeAttrFlagErrorUpdate errors transmitted: Attr Flag Errorro Counter32 .1.3.6.1.4.1.2272.1.12.10.65 |
rcStatBgpTxUpdCodeAttrLenErrorUpdate errors transmitted: Attr Len Errorro Counter32 .1.3.6.1.4.1.2272.1.12.10.66 |
rcStatBgpTxUpdCodeBadORIGINAttrUpdate errors transmitted: Bad ORIGIN Attrro Counter32 .1.3.6.1.4.1.2272.1.12.10.67 |
rcStatBgpTxUpdCodeASRoutingLoopUpdate errors transmitted: AS Routing Loopro Counter32 .1.3.6.1.4.1.2272.1.12.10.68 |
rcStatBgpTxUpdCodeBadNHAttrUpdate errors transmitted: Bad NEXT-HOP Attrro Counter32 .1.3.6.1.4.1.2272.1.12.10.69 |
rcStatBgpTxUpdCodeOptionalAttrErrorUpdate errors transmitted: Optional Attr Errorro Counter32 .1.3.6.1.4.1.2272.1.12.10.70 |
rcStatBgpTxUpdCodeBadNetworkFieldUpdate errors transmitted: Bad Network Fieldro Counter32 .1.3.6.1.4.1.2272.1.12.10.71 |
rcStatBgpTxUpdCodeMalformedASPathUpdate errors transmitted: Malformed AS Pathro Counter32 .1.3.6.1.4.1.2272.1.12.10.72 |
rcStatBgpResetreset Bgp global statsrw EnableValue .1.3.6.1.4.1.2272.1.12.10.73 |
rcStatBgpPeerTableA table used to store Bgp Peer statistics. SEQUENCE OF RcStatBgpPeerEntry .1.3.6.1.4.1.2272.1.12.11 |
rcStatBgpPeerEntryBgp Peer statistics RcStatBgpPeerEntry .1.3.6.1.4.1.2272.1.12.11.1 |
rcStatBgpPeerAddrro IpAddress .1.3.6.1.4.1.2272.1.12.11.1.1 |
rcStatBgpPeerStartsNumber of times peer BGP connection startedro Counter32 .1.3.6.1.4.1.2272.1.12.11.1.2 |
rcStatBgpPeerStopsNumber of times peer BGP connection stoppedro Counter32 .1.3.6.1.4.1.2272.1.12.11.1.3 |
rcStatBgpPeerOpensNumber of times peer opens TCPro Counter32 .1.3.6.1.4.1.2272.1.12.11.1.4 |
rcStatBgpPeerClosesNumber of times peer closes TCPro Counter32 .1.3.6.1.4.1.2272.1.12.11.1.5 |
rcStatBgpPeerFailsNumber of times peer TCP attempts failedro Counter32 .1.3.6.1.4.1.2272.1.12.11.1.6 |
rcStatBgpPeerFatalsNumber of times peer TCP crashes due to fatal errorro Counter32 .1.3.6.1.4.1.2272.1.12.11.1.7 |
rcStatBgpPeerConnExpsNumber of times peer TCP retry timer expiredro Counter32 .1.3.6.1.4.1.2272.1.12.11.1.8 |
rcStatBgpPeerHoldExpsNumber of times peer hold timer expiredro Counter32 .1.3.6.1.4.1.2272.1.12.11.1.9 |
rcStatBgpPeerKeepExpsNumber of times peer keepalive timer expiredro Counter32 .1.3.6.1.4.1.2272.1.12.11.1.10 |
rcStatBgpPeerTxMsgsTotal messages send by the peerro Counter32 .1.3.6.1.4.1.2272.1.12.11.1.11 |
rcStatBgpPeerTxOpensOpens sent by the peerro Counter32 .1.3.6.1.4.1.2272.1.12.11.1.12 |
rcStatBgpPeerTxKeepsKeepalives sent by the peerro Counter32 .1.3.6.1.4.1.2272.1.12.11.1.13 |
rcStatBgpPeerTxUpdatesUpdates sent by the peerro Counter32 .1.3.6.1.4.1.2272.1.12.11.1.14 |
rcStatBgpPeerTxNotifysNotifications sent by the peerro Counter32 .1.3.6.1.4.1.2272.1.12.11.1.15 |
rcStatBgpPeerRxMsgsTotal messages received by the peerro Counter32 .1.3.6.1.4.1.2272.1.12.11.1.16 |
rcStatBgpPeerRxInCompPktsIncomplete message received by the peerro Counter32 .1.3.6.1.4.1.2272.1.12.11.1.17 |
rcStatBgpPeerRxOpensOpens received by the peerro Counter32 .1.3.6.1.4.1.2272.1.12.11.1.18 |
rcStatBgpPeerRxKeepsKeepalives received by the peerro Counter32 .1.3.6.1.4.1.2272.1.12.11.1.19 |
rcStatBgpPeerRxUpdatesUpdates received by the peerro Counter32 .1.3.6.1.4.1.2272.1.12.11.1.20 |
rcStatBgpPeerRxNotifysNotifications received by the peerro Counter32 .1.3.6.1.4.1.2272.1.12.11.1.21 |
rcStatBgpPeerBadEventsNumber of invalid events received by the peerro Counter32 .1.3.6.1.4.1.2272.1.12.11.1.22 |
rcStatBgpPeerSyncFailsNumber of times FDB sync failed of the peerro Counter32 .1.3.6.1.4.1.2272.1.12.11.1.23 |
rcStatBgpPeerRcvdTooShortNumber of messages recieved by the peer that is too sho
rtro Counter32 .1.3.6.1.4.1.2272.1.12.11.1.24 |
rcStatBgpPeerNoMarkerNumber of messages without marker recieved by the peerro Counter32 .1.3.6.1.4.1.2272.1.12.11.1.25 |
rcStatBgpPeerDroppedNumber of messages the peer has droppedro Counter32 .1.3.6.1.4.1.2272.1.12.11.1.26 |
rcStatBgpPeerBadMsgTypesNumber of messages with invalid message typero Counter32 .1.3.6.1.4.1.2272.1.12.11.1.27 |
rcStatBgpPeerTrEventPeer trace eventro Counter32 .1.3.6.1.4.1.2272.1.12.11.1.28 |
rcStatBgpPeerTxRoutesNumber of NLRI sent by peerro Counter32 .1.3.6.1.4.1.2272.1.12.11.1.29 |
rcStatBgpPeerRxRoutesAddedNumber of routes added into loc_rib by this peerro Counter32 .1.3.6.1.4.1.2272.1.12.11.1.30 |
rcStatBgpPeerRxRoutesReplacedNumber of routes replaced by the routes received by the
peerro Counter32 .1.3.6.1.4.1.2272.1.12.11.1.31 |
rcStatBgpPeerRxNlriNumber of NLRI received by the peerro Counter32 .1.3.6.1.4.1.2272.1.12.11.1.32 |
rcStatBgpPeerRxValidUpdatesNumber of valid UPDATEs received by the peerro Counter32 .1.3.6.1.4.1.2272.1.12.11.1.33 |
rcStatBgpPeerRxECodeHeaderTotal errors peer received: Headerro Counter32 .1.3.6.1.4.1.2272.1.12.11.1.34 |
rcStatBgpPeerRxECodeOpenTotal errors peer received: Openro Counter32 .1.3.6.1.4.1.2272.1.12.11.1.35 |
rcStatBgpPeerRxECodeUpdateTotal errors peer received: Updatero Counter32 .1.3.6.1.4.1.2272.1.12.11.1.36 |
rcStatBgpPeerRxECodeHoldtimerTotal errors peer received: Holdro Counter32 .1.3.6.1.4.1.2272.1.12.11.1.37 |
rcStatBgpPeerRxECodeFSMTotal errors peer received: Fsmro Counter32 .1.3.6.1.4.1.2272.1.12.11.1.38 |
rcStatBgpPeerRxECodeCeaseTotal errors peer received: Ceasero Counter32 .1.3.6.1.4.1.2272.1.12.11.1.39 |
rcStatBgpPeerRxHdrCodeNoSyncHeader errors peer received: Not Synchronizedro Counter32 .1.3.6.1.4.1.2272.1.12.11.1.40 |
rcStatBgpPeerRxHdrCodeInvalidMsgLenHeader errors peer received: Invalid message lengthro Counter32 .1.3.6.1.4.1.2272.1.12.11.1.41 |
rcStatBgpPeerRxHdrCodeInvalidMsgTypeHeader errors peer received: Invalid message typero Counter32 .1.3.6.1.4.1.2272.1.12.11.1.42 |
rcStatBgpPeerRxOpCodeBadVerOpen errors peer received: Bad Versionro Counter32 .1.3.6.1.4.1.2272.1.12.11.1.43 |
rcStatBgpPeerRxOpCodeBadAsOpen errors peer received: Bad AS numberro Counter32 .1.3.6.1.4.1.2272.1.12.11.1.44 |
rcStatBgpPeerRxOpCodeBadRtIDOpen errors peer received: Bad BGP IDro Counter32 .1.3.6.1.4.1.2272.1.12.11.1.45 |
rcStatBgpPeerRxOpCodeUnsuppOptionOpen errors peer received: Unsupported Optionsro Counter32 .1.3.6.1.4.1.2272.1.12.11.1.46 |
rcStatBgpPeerRxOpCodeAuthFailOpen errors peer received: Authorization failuresro Counter32 .1.3.6.1.4.1.2272.1.12.11.1.47 |
rcStatBgpPeerRxOpCodeBadHoldOpen errors peer received: Bad Hold valuero Counter32 .1.3.6.1.4.1.2272.1.12.11.1.48 |
rcStatBgpPeerRxUpdCodeMalformedAttrListUpdate errors peer received: Malformed Attr Listro Counter32 .1.3.6.1.4.1.2272.1.12.11.1.49 |
rcStatBgpPeerRxUpdCodeWelknownAttrUnrecogUpdate errors peer received: Malformed Attr Listro Counter32 .1.3.6.1.4.1.2272.1.12.11.1.50 |
rcStatBgpPeerRxUpdCodeWelknownAttrMissUpdate errors peer received: Malformed Attr Listro Counter32 .1.3.6.1.4.1.2272.1.12.11.1.51 |
rcStatBgpPeerRxUpdCodeAttrFlagErrorUpdate errors peer received: Malformed Attr Listro Counter32 .1.3.6.1.4.1.2272.1.12.11.1.52 |
rcStatBgpPeerRxUpdCodeAttrLenErrorUpdate errors peer received: Malformed Attr Listro Counter32 .1.3.6.1.4.1.2272.1.12.11.1.53 |
rcStatBgpPeerRxUpdCodeBadORIGINAttrUpdate errors peer received: Malformed Attr Listro Counter32 .1.3.6.1.4.1.2272.1.12.11.1.54 |
rcStatBgpPeerRxUpdCodeASRoutingLoopUpdate errors peer received: Malformed Attr Listro Counter32 .1.3.6.1.4.1.2272.1.12.11.1.55 |
rcStatBgpPeerRxUpdCodeBadNHAttrUpdate errors peer received: Malformed Attr Listro Counter32 .1.3.6.1.4.1.2272.1.12.11.1.56 |
rcStatBgpPeerRxUpdCodeOptionalAttrErrorUpdate errors peer received: Malformed Attr Listro Counter32 .1.3.6.1.4.1.2272.1.12.11.1.57 |
rcStatBgpPeerRxUpdCodeBadNetworkFieldUpdate errors peer received: Malformed Attr Listro Counter32 .1.3.6.1.4.1.2272.1.12.11.1.58 |
rcStatBgpPeerRxUpdCodeMalformedASPathUpdate errors peer received: Malformed Attr Listro Counter32 .1.3.6.1.4.1.2272.1.12.11.1.59 |
rcStatBgpPeerTxECodeHeaderTotal errors peer received: Headerro Counter32 .1.3.6.1.4.1.2272.1.12.11.1.60 |
rcStatBgpPeerTxECodeOpenTotal errors peer received: Openro Counter32 .1.3.6.1.4.1.2272.1.12.11.1.61 |
rcStatBgpPeerTxECodeUpdateTotal errors peer received: Updatero Counter32 .1.3.6.1.4.1.2272.1.12.11.1.62 |
rcStatBgpPeerTxECodeHoldtimerTotal errors peer received: Holdro Counter32 .1.3.6.1.4.1.2272.1.12.11.1.63 |
rcStatBgpPeerTxECodeFSMTotal errors peer received: Fsmro Counter32 .1.3.6.1.4.1.2272.1.12.11.1.64 |
rcStatBgpPeerTxECodeCeaseTotal errors peer received: Ceasero Counter32 .1.3.6.1.4.1.2272.1.12.11.1.65 |
rcStatBgpPeerTxHdrCodeNoSyncHeader errors peer received: Not Synchronizedro Counter32 .1.3.6.1.4.1.2272.1.12.11.1.66 |
rcStatBgpPeerTxHdrCodeInvalidMsgLenHeader errors peer received: Invalid message lengthro Counter32 .1.3.6.1.4.1.2272.1.12.11.1.67 |
rcStatBgpPeerTxHdrCodeInvalidMsgTypeHeader errors peer received: Invalid message typero Counter32 .1.3.6.1.4.1.2272.1.12.11.1.68 |
rcStatBgpPeerTxOpCodeBadVerOpen errors peer received: Bad Versionro Counter32 .1.3.6.1.4.1.2272.1.12.11.1.69 |
rcStatBgpPeerTxOpCodeBadAsOpen errors peer received: Bad AS numberro Counter32 .1.3.6.1.4.1.2272.1.12.11.1.70 |
rcStatBgpPeerTxOpCodeBadRtIDOpen errors peer received: Bad BGP IDro Counter32 .1.3.6.1.4.1.2272.1.12.11.1.71 |
rcStatBgpPeerTxOpCodeUnsuppOptionOpen errors peer received: Unsupported Optionsro Counter32 .1.3.6.1.4.1.2272.1.12.11.1.72 |
rcStatBgpPeerTxOpCodeAuthFailOpen errors peer received: Authorization failuresro Counter32 .1.3.6.1.4.1.2272.1.12.11.1.73 |
rcStatBgpPeerTxOpCodeBadHoldOpen errors peer received: Bad Hold valuero Counter32 .1.3.6.1.4.1.2272.1.12.11.1.74 |
rcStatBgpPeerTxUpdCodeMalformedAttrListUpdate errors peer received: Malformed Attr Listro Counter32 .1.3.6.1.4.1.2272.1.12.11.1.75 |
rcStatBgpPeerTxUpdCodeWelknownAttrUnrecogUpdate errors peer received: Malformed Attr Listro Counter32 .1.3.6.1.4.1.2272.1.12.11.1.76 |
rcStatBgpPeerTxUpdCodeWelknownAttrMissUpdate errors peer received: Malformed Attr Listro Counter32 .1.3.6.1.4.1.2272.1.12.11.1.77 |
rcStatBgpPeerTxUpdCodeAttrFlagErrorUpdate errors peer received: Malformed Attr Listro Counter32 .1.3.6.1.4.1.2272.1.12.11.1.78 |
rcStatBgpPeerTxUpdCodeAttrLenErrorUpdate errors peer received: Malformed Attr Listro Counter32 .1.3.6.1.4.1.2272.1.12.11.1.79 |
rcStatBgpPeerTxUpdCodeBadORIGINAttrUpdate errors peer received: Malformed Attr Listro Counter32 .1.3.6.1.4.1.2272.1.12.11.1.80 |
rcStatBgpPeerTxUpdCodeASRoutingLoopUpdate errors peer received: Malformed Attr Listro Counter32 .1.3.6.1.4.1.2272.1.12.11.1.81 |
rcStatBgpPeerTxUpdCodeBadNHAttrUpdate errors peer received: Malformed Attr Listro Counter32 .1.3.6.1.4.1.2272.1.12.11.1.82 |
rcStatBgpPeerTxUpdCodeOptionalAttrErrorUpdate errors peer received: Malformed Attr Listro Counter32 .1.3.6.1.4.1.2272.1.12.11.1.83 |
rcStatBgpPeerTxUpdCodeBadNetworkFieldUpdate errors peer received: Malformed Attr Listro Counter32 .1.3.6.1.4.1.2272.1.12.11.1.84 |
rcStatBgpPeerTxUpdCodeMalformedASPathUpdate errors peer received: Malformed Attr Listro Counter32 .1.3.6.1.4.1.2272.1.12.11.1.85 |
rcStatBgpPeerResetreset peer statsrw EnableValue .1.3.6.1.4.1.2272.1.12.11.1.86 |
rcStatBgpPeerAfTableA table used to store v4/v6 Bgp Peer statistics. SEQUENCE OF RcStatBgpPeerAfEntry .1.3.6.1.4.1.2272.1.12.13 |
rcStatBgpPeerAfEntryAF independent Bgp Peer statistics RcStatBgpPeerAfEntry .1.3.6.1.4.1.2272.1.12.13.1 |
rcStatBgpPeerAfAddrTypeInet address type of the AF independent peer InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2272.1.12.13.1.1 |
rcStatBgpPeerAfAddrInet address of the AF independent peer InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2272.1.12.13.1.2 |
rcStatBgpPeerAfStartsNumber of times peer BGP connection startedro Counter32 .1.3.6.1.4.1.2272.1.12.13.1.3 |
rcStatBgpPeerAfStopsNumber of times peer BGP connection stoppedro Counter32 .1.3.6.1.4.1.2272.1.12.13.1.4 |
rcStatBgpPeerAfOpensNumber of times peer opens TCPro Counter32 .1.3.6.1.4.1.2272.1.12.13.1.5 |
rcStatBgpPeerAfClosesNumber of times peer closes TCPro Counter32 .1.3.6.1.4.1.2272.1.12.13.1.6 |
rcStatBgpPeerAfFailsNumber of times peer TCP attempts failedro Counter32 .1.3.6.1.4.1.2272.1.12.13.1.7 |
rcStatBgpPeerAfFatalsNumber of times peer TCP crashes due to fatal errorro Counter32 .1.3.6.1.4.1.2272.1.12.13.1.8 |
rcStatBgpPeerAfConnExpsNumber of times peer TCP retry timer expiredro Counter32 .1.3.6.1.4.1.2272.1.12.13.1.9 |
rcStatBgpPeerAfHoldExpsNumber of times peer hold timer expiredro Counter32 .1.3.6.1.4.1.2272.1.12.13.1.10 |
rcStatBgpPeerAfKeepExpsNumber of times peer keepalive timer expiredro Counter32 .1.3.6.1.4.1.2272.1.12.13.1.11 |
rcStatBgpPeerAfTxMsgsTotal messages send by the peerro Counter32 .1.3.6.1.4.1.2272.1.12.13.1.12 |
rcStatBgpPeerAfTxOpensOpens sent by the peerro Counter32 .1.3.6.1.4.1.2272.1.12.13.1.13 |
rcStatBgpPeerAfTxKeepsKeepalives sent by the peerro Counter32 .1.3.6.1.4.1.2272.1.12.13.1.14 |
rcStatBgpPeerAfTxUpdatesUpdates sent by the peerro Counter32 .1.3.6.1.4.1.2272.1.12.13.1.15 |
rcStatBgpPeerAfTxNotifysNotifications sent by the peerro Counter32 .1.3.6.1.4.1.2272.1.12.13.1.16 |
rcStatBgpPeerAfRxMsgsTotal messages received by the peerro Counter32 .1.3.6.1.4.1.2272.1.12.13.1.17 |
rcStatBgpPeerAfRxInCompPktsIncomplete message received by the peerro Counter32 .1.3.6.1.4.1.2272.1.12.13.1.18 |
rcStatBgpPeerAfRxOpensOpens received by the peerro Counter32 .1.3.6.1.4.1.2272.1.12.13.1.19 |
rcStatBgpPeerAfRxKeepsKeepalives received by the peerro Counter32 .1.3.6.1.4.1.2272.1.12.13.1.20 |
rcStatBgpPeerAfRxUpdatesUpdates received by the peerro Counter32 .1.3.6.1.4.1.2272.1.12.13.1.21 |
rcStatBgpPeerAfRxNotifysNotifications received by the peerro Counter32 .1.3.6.1.4.1.2272.1.12.13.1.22 |
rcStatBgpPeerAfBadEventsNumber of invalid events received by the peerro Counter32 .1.3.6.1.4.1.2272.1.12.13.1.23 |
rcStatBgpPeerAfSyncFailsNumber of times FDB sync failed of the peerro Counter32 .1.3.6.1.4.1.2272.1.12.13.1.24 |
rcStatBgpPeerAfRcvdTooShortNumber of messages recieved by the peer that is too sho
rtro Counter32 .1.3.6.1.4.1.2272.1.12.13.1.25 |
rcStatBgpPeerAfNoMarkerNumber of messages without marker recieved by the peerro Counter32 .1.3.6.1.4.1.2272.1.12.13.1.26 |
rcStatBgpPeerAfDroppedNumber of messages the peer has droppedro Counter32 .1.3.6.1.4.1.2272.1.12.13.1.27 |
rcStatBgpPeerAfBadMsgTypesNumber of messages with invalid message typero Counter32 .1.3.6.1.4.1.2272.1.12.13.1.28 |
rcStatBgpPeerAfTrEventPeer trace eventro Counter32 .1.3.6.1.4.1.2272.1.12.13.1.29 |
rcStatBgpPeerAfTxRoutesNumber of NLRI sent by peerro Counter32 .1.3.6.1.4.1.2272.1.12.13.1.30 |
rcStatBgpPeerAfRxRoutesAddedNumber of routes added into loc_rib by this peerro Counter32 .1.3.6.1.4.1.2272.1.12.13.1.31 |
rcStatBgpPeerAfRxRoutesReplacedNumber of routes replaced by the routes received by the
peerro Counter32 .1.3.6.1.4.1.2272.1.12.13.1.32 |
rcStatBgpPeerAfRxNlriNumber of NLRI received by the peerro Counter32 .1.3.6.1.4.1.2272.1.12.13.1.33 |
rcStatBgpPeerAfRxValidUpdatesNumber of valid UPDATEs received by the peerro Counter32 .1.3.6.1.4.1.2272.1.12.13.1.34 |
rcStatBgpPeerAfRxECodeHeaderTotal errors peer received: Headerro Counter32 .1.3.6.1.4.1.2272.1.12.13.1.35 |
rcStatBgpPeerAfRxECodeOpenTotal errors peer received: Openro Counter32 .1.3.6.1.4.1.2272.1.12.13.1.36 |
rcStatBgpPeerAfRxECodeUpdateTotal errors peer received: Updatero Counter32 .1.3.6.1.4.1.2272.1.12.13.1.37 |
rcStatBgpPeerAfRxECodeHoldtimerTotal errors peer received: Holdro Counter32 .1.3.6.1.4.1.2272.1.12.13.1.38 |
rcStatBgpPeerAfRxECodeFSMTotal errors peer received: Fsmro Counter32 .1.3.6.1.4.1.2272.1.12.13.1.39 |
rcStatBgpPeerAfRxECodeCeaseTotal errors peer received: Ceasero Counter32 .1.3.6.1.4.1.2272.1.12.13.1.40 |
rcStatBgpPeerAfRxHdrCodeNoSyncHeader errors peer received: Not Synchronizedro Counter32 .1.3.6.1.4.1.2272.1.12.13.1.41 |
rcStatBgpPeerAfRxHdrCodeInvalidMsgLenHeader errors peer received: Invalid message lengthro Counter32 .1.3.6.1.4.1.2272.1.12.13.1.42 |
rcStatBgpPeerAfRxHdrCodeInvalidMsgTypeHeader errors peer received: Invalid message typero Counter32 .1.3.6.1.4.1.2272.1.12.13.1.43 |
rcStatBgpPeerAfRxOpCodeBadVerOpen errors peer received: Bad Versionro Counter32 .1.3.6.1.4.1.2272.1.12.13.1.44 |
rcStatBgpPeerAfRxOpCodeBadAsOpen errors peer received: Bad AS numberro Counter32 .1.3.6.1.4.1.2272.1.12.13.1.45 |
rcStatBgpPeerAfRxOpCodeBadRtIDOpen errors peer received: Bad BGP IDro Counter32 .1.3.6.1.4.1.2272.1.12.13.1.46 |
rcStatBgpPeerAfRxOpCodeUnsuppOptionOpen errors peer received: Unsupported Optionsro Counter32 .1.3.6.1.4.1.2272.1.12.13.1.47 |
rcStatBgpPeerAfRxOpCodeAuthFailOpen errors peer received: Authorization failuresro Counter32 .1.3.6.1.4.1.2272.1.12.13.1.48 |
rcStatBgpPeerAfRxOpCodeBadHoldOpen errors peer received: Bad Hold valuero Counter32 .1.3.6.1.4.1.2272.1.12.13.1.49 |
rcStatBgpPeerAfRxUpdCodeMalformedAttrListUpdate errors peer received: Malformed Attr Listro Counter32 .1.3.6.1.4.1.2272.1.12.13.1.50 |
rcStatBgpPeerAfRxUpdCodeWelknownAttrUnrecogUpdate errors peer received: Malformed Attr Listro Counter32 .1.3.6.1.4.1.2272.1.12.13.1.51 |
rcStatBgpPeerAfRxUpdCodeWelknownAttrMissUpdate errors peer received: Malformed Attr Listro Counter32 .1.3.6.1.4.1.2272.1.12.13.1.52 |
rcStatBgpPeerAfRxUpdCodeAttrFlagErrorUpdate errors peer received: Malformed Attr Listro Counter32 .1.3.6.1.4.1.2272.1.12.13.1.53 |
rcStatBgpPeerAfRxUpdCodeAttrLenErrorUpdate errors peer received: Malformed Attr Listro Counter32 .1.3.6.1.4.1.2272.1.12.13.1.54 |
rcStatBgpPeerAfRxUpdCodeBadORIGINAttrUpdate errors peer received: Malformed Attr Listro Counter32 .1.3.6.1.4.1.2272.1.12.13.1.55 |
rcStatBgpPeerAfRxUpdCodeASRoutingLoopUpdate errors peer received: Malformed Attr Listro Counter32 .1.3.6.1.4.1.2272.1.12.13.1.56 |
rcStatBgpPeerAfRxUpdCodeBadNHAttrUpdate errors peer received: Malformed Attr Listro Counter32 .1.3.6.1.4.1.2272.1.12.13.1.57 |
rcStatBgpPeerAfRxUpdCodeOptionalAttrErrorUpdate errors peer received: Malformed Attr Listro Counter32 .1.3.6.1.4.1.2272.1.12.13.1.58 |
rcStatBgpPeerAfRxUpdCodeBadNetworkFieldUpdate errors peer received: Malformed Attr Listro Counter32 .1.3.6.1.4.1.2272.1.12.13.1.59 |
rcStatBgpPeerAfRxUpdCodeMalformedASPathUpdate errors peer received: Malformed Attr Listro Counter32 .1.3.6.1.4.1.2272.1.12.13.1.60 |
rcStatBgpPeerAfTxECodeHeaderTotal errors peer received: Headerro Counter32 .1.3.6.1.4.1.2272.1.12.13.1.61 |
rcStatBgpPeerAfTxECodeOpenTotal errors peer received: Openro Counter32 .1.3.6.1.4.1.2272.1.12.13.1.62 |
rcStatBgpPeerAfTxECodeUpdateTotal errors peer received: Updatero Counter32 .1.3.6.1.4.1.2272.1.12.13.1.63 |
rcStatBgpPeerAfTxECodeHoldtimerTotal errors peer received: Holdro Counter32 .1.3.6.1.4.1.2272.1.12.13.1.64 |
rcStatBgpPeerAfTxECodeFSMTotal errors peer received: Fsmro Counter32 .1.3.6.1.4.1.2272.1.12.13.1.65 |
rcStatBgpPeerAfTxECodeCeaseTotal errors peer received: Ceasero Counter32 .1.3.6.1.4.1.2272.1.12.13.1.66 |
rcStatBgpPeerAfTxHdrCodeNoSyncHeader errors peer received: Not Synchronizedro Counter32 .1.3.6.1.4.1.2272.1.12.13.1.67 |
rcStatBgpPeerAfTxHdrCodeInvalidMsgLenHeader errors peer received: Invalid message lengthro Counter32 .1.3.6.1.4.1.2272.1.12.13.1.68 |
rcStatBgpPeerAfTxHdrCodeInvalidMsgTypeHeader errors peer received: Invalid message typero Counter32 .1.3.6.1.4.1.2272.1.12.13.1.69 |
rcStatBgpPeerAfTxOpCodeBadVerOpen errors peer received: Bad Versionro Counter32 .1.3.6.1.4.1.2272.1.12.13.1.70 |
rcStatBgpPeerAfTxOpCodeBadAsOpen errors peer received: Bad AS numberro Counter32 .1.3.6.1.4.1.2272.1.12.13.1.71 |
rcStatBgpPeerAfTxOpCodeBadRtIDOpen errors peer received: Bad BGP IDro Counter32 .1.3.6.1.4.1.2272.1.12.13.1.72 |
rcStatBgpPeerAfTxOpCodeUnsuppOptionOpen errors peer received: Unsupported Optionsro Counter32 .1.3.6.1.4.1.2272.1.12.13.1.73 |
rcStatBgpPeerAfTxOpCodeAuthFailOpen errors peer received: Authorization failuresro Counter32 .1.3.6.1.4.1.2272.1.12.13.1.74 |
rcStatBgpPeerAfTxOpCodeBadHoldOpen errors peer received: Bad Hold valuero Counter32 .1.3.6.1.4.1.2272.1.12.13.1.75 |
rcStatBgpPeerAfTxUpdCodeMalformedAttrListUpdate errors peer received: Malformed Attr Listro Counter32 .1.3.6.1.4.1.2272.1.12.13.1.76 |
rcStatBgpPeerAfTxUpdCodeWelknownAttrUnrecogUpdate errors peer received: Malformed Attr Listro Counter32 .1.3.6.1.4.1.2272.1.12.13.1.77 |
rcStatBgpPeerAfTxUpdCodeWelknownAttrMissUpdate errors peer received: Malformed Attr Listro Counter32 .1.3.6.1.4.1.2272.1.12.13.1.78 |
rcStatBgpPeerAfTxUpdCodeAttrFlagErrorUpdate errors peer received: Malformed Attr Listro Counter32 .1.3.6.1.4.1.2272.1.12.13.1.79 |
rcStatBgpPeerAfTxUpdCodeAttrLenErrorUpdate errors peer received: Malformed Attr Listro Counter32 .1.3.6.1.4.1.2272.1.12.13.1.80 |
rcStatBgpPeerAfTxUpdCodeBadORIGINAttrUpdate errors peer received: Malformed Attr Listro Counter32 .1.3.6.1.4.1.2272.1.12.13.1.81 |
rcStatBgpPeerAfTxUpdCodeASRoutingLoopUpdate errors peer received: Malformed Attr Listro Counter32 .1.3.6.1.4.1.2272.1.12.13.1.82 |
rcStatBgpPeerAfTxUpdCodeBadNHAttrUpdate errors peer received: Malformed Attr Listro Counter32 .1.3.6.1.4.1.2272.1.12.13.1.83 |
rcStatBgpPeerAfTxUpdCodeOptionalAttrErrorUpdate errors peer received: Malformed Attr Listro Counter32 .1.3.6.1.4.1.2272.1.12.13.1.84 |
rcStatBgpPeerAfTxUpdCodeBadNetworkFieldUpdate errors peer received: Malformed Attr Listro Counter32 .1.3.6.1.4.1.2272.1.12.13.1.85 |
rcStatBgpPeerAfTxUpdCodeMalformedASPathUpdate errors peer received: Malformed Attr Listro Counter32 .1.3.6.1.4.1.2272.1.12.13.1.86 |
rcStatBgpPeerAfResetreset peer statsrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.12.13.1.87 |
rcStg OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.13 |
rcStgMaxStgsThe maximum number of spanning tree groups this
device can support concurrently.rw Integer32 .1.3.6.1.4.1.2272.1.13.1 |
rcStgNumStgsThe number of spanning tree groups that are
currently defined.ro Integer32 .1.3.6.1.4.1.2272.1.13.2 |
rcStgUnassignedPortsA bitfield used to identify which ports in
the system currently not assigned to any STG.
The bitfield is 32 octets long representing
ports 0 to 255 (inclusive).ro PortSet .1.3.6.1.4.1.2272.1.13.3 |
rcStgTableA table used to store Spanning Tree Group (STG)
information. Each row in the table specifies
a different STG in the device. SEQUENCE OF RcStgEntry .1.3.6.1.4.1.2272.1.13.4 |
rcStgEntrySTG attributes RcStgEntry .1.3.6.1.4.1.2272.1.13.4.1 |
rcStgIdAn identifier used to identify a STG in the device.ro INTEGER .1.3.6.1.4.1.2272.1.13.4.1.1 |
rcStgTaggedBpduAddressThe MAC address to be assigned to the destination
mac address field in tagged BPDUs.
The default address is the well known multicast
group address 01-80-c2-00-00-00.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2272.1.13.4.1.2 |
rcStgTaggedBpduVlanIdThe VLAN ID to be used for tagging BPDUs.rw Integer32 .1.3.6.1.4.1.2272.1.13.4.1.3 |
rcStgBridgeAddressThe MAC address used by this bridge when it must
be referred to in a unique fashion. It is
recommended that this be the numerically smallest
MAC address of all ports that belong to this
bridge. However it is only required to be unique.
When concatenated with rcStgPriority a unique
BridgeIdentifier is formed which is used in the
Spanning Tree Protocol.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2272.1.13.4.1.4 |
rcStgNumPortsThe number of ports controlled by this bridging entity.ro Integer32 .1.3.6.1.4.1.2272.1.13.4.1.5 |
rcStgProtocolSpecificationAn indication of what version of the Spanning
Tree Protocol is being run. The value
'decLb100(2)' indicates the DEC LANbridge 100
Spanning Tree protocol. IEEE 802.1d
implementations will return 'ieee8021d(3)'. If
future versions of the IEEE Spanning Tree Protocol
are released that are incompatible with the
current version a new value will be defined.ro Enumeration .1.3.6.1.4.1.2272.1.13.4.1.6 |
rcStgPriorityThe value of the write-able portion of the Bridge
ID, i.e., the first two octets of the (8 octet
long) Bridge ID. The other (last) 6 octets of the
Bridge ID are given by the value of rcStgBridgeAddress.rw INTEGER .1.3.6.1.4.1.2272.1.13.4.1.7 |
rcStgTimeSinceTopologyChangeThe time (in hundredths of a second) since the
last time a topology change was detected by the
bridge entity.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2272.1.13.4.1.8 |
rcStgTopChangesThe total number of topology changes detected by
this bridge since the management entity was last
reset or initialized.ro Counter32 .1.3.6.1.4.1.2272.1.13.4.1.9 |
rcStgDesignatedRootThe bridge identifier of the root of the spanning
tree as determined by the Spanning Tree Protocol
as executed by this node. This value is used as
the Root Identifier parameter in all Configuration
Bridge PDUs originated by this node.ro BridgeId .1.3.6.1.4.1.2272.1.13.4.1.10 |
rcStgRootCostThe cost of the path to the root as seen from
this bridge.ro Integer32 .1.3.6.1.4.1.2272.1.13.4.1.11 |
rcStgRootPortThe port number of the port which offers the
lowest cost path from this bridge to the root
bridge.ro InterfaceIndex .1.3.6.1.4.1.2272.1.13.4.1.12 |
rcStgMaxAgeThe maximum age of Spanning Tree Protocol
information learned from the network on any port
before it is discarded, in units of hundredths of
a second. This is the actual value that this
bridge is currently using.ro Timeout .1.3.6.1.4.1.2272.1.13.4.1.13 |
rcStgHelloTimeThe amount of time between the transmission of
Configuration bridge PDUs by this node on any port
when it is the root of the spanning tree or trying
to become so, in units of hundredths of a second.
This is the actual value that this bridge is
currently using.ro Timeout .1.3.6.1.4.1.2272.1.13.4.1.14 |
rcStgHoldTimeThis time value determines the interval length
during which no more than two Configuration bridge
PDUs shall be transmitted by this node, in units
of hundredths of a second.ro Integer32 .1.3.6.1.4.1.2272.1.13.4.1.15 |
rcStgForwardDelayThis time value, measured in units of hundredths
of a second, controls how fast a port changes its
spanning state when moving towards the Forwarding
state. The value determines how long the port
stays in each of the Listening and Learning
states, which precede the Forwarding state. This
value is also used, when a topology change has
been detected and is underway, to age all dynamic
entries in the Forwarding Database. [Note that
this value is the one that this bridge is
currently using, in contrast to
rcStgBridgeForwardDelay which is the value that
this bridge and all others would start using
if/when this bridge were to become the root.]ro Timeout .1.3.6.1.4.1.2272.1.13.4.1.16 |
rcStgBridgeMaxAgeThe value that all bridges use for MaxAge when
this bridge is acting as the root. Note that
802.1D-1990 specifies that the range for this
parameter is related to the value of
rcStgBridgeHelloTime. The granularity of this
timer is specified by 802.1D-1990 to be 1 second.
An agent may return a badValue error if a set is
attempted to a value which is not a whole number
of seconds.rw Timeout .1.3.6.1.4.1.2272.1.13.4.1.17 |
rcStgBridgeHelloTimeThe value that all bridges use for HelloTime when
this bridge is acting as the root. The
granularity of this timer is specified by 802.1D-
1990 to be 1 second. An agent may return a
badValue error if a set is attempted to a value
which is not a whole number of seconds.rw Timeout .1.3.6.1.4.1.2272.1.13.4.1.18 |
rcStgBridgeForwardDelayThe value that all bridges use for ForwardDelay
when this bridge is acting as the root. Note that
802.1D-1990 specifies that the range for this
parameter is related to the value of
rcStgBridgeMaxAge. The granularity of this
timer is specified by 802.1D-1990 to be 1 second.
An agent may return a badValue error if a set is
attempted to a value which is not a whole number
of seconds.rw Timeout .1.3.6.1.4.1.2272.1.13.4.1.19 |
rcStgEnableStpIndicate whether the spanning tree protocol
should be active in this STG.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.13.4.1.20 |
rcStgStpTrapEnableIndicate whether traps relating to the spanning
tree protocol should be sent for this STG.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.13.4.1.21 |
rcStgPortMembersA bitfield used to identify which ports in
the system are members this STG.
The bitfield is 104 octets long representing
ports 64 (1/1) to 831 (12/68) (inclusive).rw OCTET STRING .1.3.6.1.4.1.2272.1.13.4.1.22 |
rcStgRowStatusRow status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.13.4.1.23 |
rcStgPortStpStateEvery 2 bitfields used to identify a port state
in this STG. Port state is cataloged as non-stp(0),
blocking(1), learning(2), and forwarding(3).ro OCTET STRING .1.3.6.1.4.1.2272.1.13.4.1.24 |
rcStgPortTableA table used to store Spanning Tree Group (STG)
port related information. If a port is
associated with more than one STGs, the port
will have one entry in this table for each STG
it assigned to. SEQUENCE OF RcStgPortEntry .1.3.6.1.4.1.2272.1.13.5 |
rcStgPortEntrySTG Port attributes RcStgPortEntry .1.3.6.1.4.1.2272.1.13.5.1 |
rcStgPortThe port number of the port for which this entry
contains Spanning Tree Protocol management
information.ro InterfaceIndex .1.3.6.1.4.1.2272.1.13.5.1.1 |
rcStgPortStgIdThe STG identifier this port is assigned to.ro INTEGER .1.3.6.1.4.1.2272.1.13.5.1.2 |
rcStgPortPriorityThe value of the priority field which is
contained in the first (in network byte order)
octet of the (2 octet long) Port ID. The other
octet of the Port ID is given by the value of
rcStgPort. The original range is 0..255. VSP9000
supports range is 0..240 with increament of 16rw INTEGER .1.3.6.1.4.1.2272.1.13.5.1.3 |
rcStgPortStateThe port's current state as defined by
application of the Spanning Tree Protocol. This
state controls what action a port takes on
reception of a frame. If the bridge has detected
a port that is malfunctioning it will place that
port into the broken(6) state. For ports which
are disabled (see rcStgPortEnable), this object
will have a value of disabled(1).ro Enumeration .1.3.6.1.4.1.2272.1.13.5.1.4 |
rcStgPortEnableStpThe enabled/disabled status of the port.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.13.5.1.5 |
rcStgPortFastStartWhen this flag is set, the port is moved
straight to the forwarding(5) state upon
being enabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.13.5.1.6 |
rcStgPortPathCostThe contribution of this port to the path cost of
paths towards the spanning tree root which include
this port. 802.1D-1990 recommends that the
default value of this parameter be in inverse
proportion to the speed of the attached LAN.rw INTEGER .1.3.6.1.4.1.2272.1.13.5.1.7 |
rcStgPortDesignatedRootThe unique Bridge Identifier of the Bridge
recorded as the Root in the Configuration BPDUs
transmitted by the Designated Bridge for the
segment to which the port is attached.ro BridgeId .1.3.6.1.4.1.2272.1.13.5.1.8 |
rcStgPortDesignatedCostThe path cost of the Designated Port of the
segment connected to this port. This value is
compared to the Root Path Cost field in received
bridge PDUs.ro Integer32 .1.3.6.1.4.1.2272.1.13.5.1.9 |
rcStgPortDesignatedBridgeThe Bridge Identifier of the bridge which this
port considers to be the Designated Bridge for
this port's segment.ro BridgeId .1.3.6.1.4.1.2272.1.13.5.1.10 |
rcStgPortDesignatedPortThe Port Identifier of the port on the Designated
Bridge for this port's segment.ro OCTET STRING .1.3.6.1.4.1.2272.1.13.5.1.11 |
rcStgPortForwardTransitionsThe number of times this port has transitioned
from the Learning state to the Forwarding state.ro Counter32 .1.3.6.1.4.1.2272.1.13.5.1.12 |
rcStgPortInConfigBpdusThe number of Config BPUDs received by
this port.ro Counter32 .1.3.6.1.4.1.2272.1.13.5.1.13 |
rcStgPortInTcnBpdusThe number of Topology Change Notification
BPUDs received by this port.ro Counter32 .1.3.6.1.4.1.2272.1.13.5.1.14 |
rcStgPortInBadBpdusThe number of Bad BPUDs received by this port.ro Counter32 .1.3.6.1.4.1.2272.1.13.5.1.15 |
rcStgPortOutConfigBpdusThe number of Config BPUDs transmitted by this port.ro Counter32 .1.3.6.1.4.1.2272.1.13.5.1.16 |
rcStgPortOutTcnBpdusThe number of Topology Change Notification
BPUDs transmitted by this port.ro Counter32 .1.3.6.1.4.1.2272.1.13.5.1.17 |
rcStgPortRowStatusRow status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.13.5.1.18 |
rcStgPortChangeDetectionIf disabled, topology change notifications
are not sent for the port.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.13.5.1.19 |
rcStgPortPathCost32The contribution of this port to the path cost of
paths towards the spanning tree root which include
this port. 802.1D-1998 recommends that the
default value of this parameter be in inverse
proportion to the speed of the attached LAN.
Replacement for deprecated object dot1dStpPortPathCost.rw Integer32 .1.3.6.1.4.1.2272.1.13.5.1.20 |
rcBridge OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.14 |
rcBridgeFdbTblSizeUsed to indicate the number of entries in
the bridge forwarding database table.ro Integer32 .1.3.6.1.4.1.2272.1.14.2 |
rcBridgeStaticTableThis table is a proprietary replacement to the
standard dot1dStaticTable in rfc1493. SEQUENCE OF RcBridgeStaticEntry .1.3.6.1.4.1.2272.1.14.3 |
rcBridgeStaticEntryA table containing forwarding information about
unicast entries configured into the bridge by
management. This information is used by the
transparent bridging function in determining how
to propagate a received frame. RcBridgeStaticEntry .1.3.6.1.4.1.2272.1.14.3.1 |
rcBridgeStaticAddressThe MAC address of this entry.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2272.1.14.3.1.1 |
rcBridgeStaticPortPort on which the MAC address is found.ro InterfaceIndex .1.3.6.1.4.1.2272.1.14.3.1.2 |
rcBridgeStaticStatusThis object indicates the status of this
entry. The default value is permanent(3).rw Enumeration .1.3.6.1.4.1.2272.1.14.3.1.5 |
rcBridgeStaticVlanIdro RcVlanIdOrNone .1.3.6.1.4.1.2272.1.14.3.1.7 |
rcBridgeStaticTblSizeUsed to indicate the number of entries in
the bridge static table.ro Integer32 .1.3.6.1.4.1.2272.1.14.4 |
rcBridgeUnknownMacDiscardTableThis table is used to configure the 'unknown mac discard' feature.
This feature applies to layer 2 and layer 3 packets coming from
or going out to a specific physical port. SEQUENCE OF RcBridgeUnknownMacDiscardEntry .1.3.6.1.4.1.2272.1.14.7 |
rcBridgeUnknownMacDiscardEntryA table containing information configuring
the 'unknown mac discard' feature. RcBridgeUnknownMacDiscardEntry .1.3.6.1.4.1.2272.1.14.7.1 |
rcBridgeUnknownMacDiscardIfIndexPort on which this 'unknown mac discard' configuration applied to.ro InterfaceIndex .1.3.6.1.4.1.2272.1.14.7.1.1 |
rcBridgeUnknownMacDiscardAutoLearnEnableThis variable is used to enable/disable the auto-learn capability
of a specific port. The default value is auto-learn disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.14.7.1.2 |
rcBridgeUnknownMacDiscardAutoLearnModeThis variable is used to control the auto-learn mode to either
one-shot or continuous. In one-shot mode, the first n MAC addresses
will be learned. The number n is dependents on the system's
available resource. In continuous mode, MAC address is continuous
learned until the resource limit is reached. After that the
subsequent MAC will be disallowed until one of the original
learned MAC is aged out. The default value is one-shot mode.rw Enumeration .1.3.6.1.4.1.2272.1.14.7.1.3 |
rcBridgeUnknownMacDiscardAutoLearnTableModeThis MIB variable is used to lock or unlock the auto-learn MAC
table. When the auto-learn table is lock neither new MAC will be
learned nor the original learned MAC will be aged out. User needs
to lock the auto-learn table before MAC addresses can be save to
the NVRAM. The whole auto-learn table will be flushed when the
setting change from lock to unlock mode. The default value is
unlock mode.rw Enumeration .1.3.6.1.4.1.2272.1.14.7.1.4 |
rcBridgeUnknownMacDiscardLogViolationsThis variable controls the logging action that the system will
take when a MAC address violation event was detected. The
value 'enable' means a log record will be written to the system
log file when a violation event was detected. The default value
is enable.rw Enumeration .1.3.6.1.4.1.2272.1.14.7.1.5 |
rcBridgeUnknownMacDiscardSendTrapThis variable controls the send trap action that system will take
when a MAC address violation event was detected. The value 'enable'
means a SNMP trap packet will be send to the management station
when a violation event was detected. The default value is disable.rw Enumeration .1.3.6.1.4.1.2272.1.14.7.1.6 |
rcBridgeUnknownMacDiscardDisablePortThis variable controls the 'disable-port' action that system
will take when a MAC address violation event was detected. The
value 'enable' means the specific port will be disabled when the
violation event was detected. It needs user manually to bring
the port back once it was disabled. The default value is disable.rw Enumeration .1.3.6.1.4.1.2272.1.14.7.1.7 |
rcBridgeUnknownMacDiscardMacCountMaxThis variable represents the maxium number of MACc that
can be added to some port.rw INTEGER .1.3.6.1.4.1.2272.1.14.7.1.10 |
rcBridgeUnknownMacDiscardMacCountCurThis variable represents the current number of MACs that have
been added to some port.ro INTEGER .1.3.6.1.4.1.2272.1.14.7.1.11 |
rcBridgeManualEditTableThis table is used to specify what MAC addresses can be learned
on each port. SEQUENCE OF RcBridgeManualEditEntry .1.3.6.1.4.1.2272.1.14.8 |
rcBridgeManualEditEntryA table containing information of
MAC addresses that can be learned. RcBridgeManualEditEntry .1.3.6.1.4.1.2272.1.14.8.1 |
rcBridgeManualEditAddressThis variable contains the source MAC address of an entry.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2272.1.14.8.1.1 |
rcBridgeManualEditPortsThis variable contains the allowed ports on which the MAC
address of this entry can be learned.rw PortSet .1.3.6.1.4.1.2272.1.14.8.1.2 |
rcBridgeManualEditMonitorThis variable specifies the monitoring setting of the MAC
address. The value 'true' means a copy of packet frame that
send from or to the MAC address is forwarded to the designated
monitoring port on the system. The default value is false.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.14.8.1.3 |
rcBridgeManualEditPriorityThis variable specifies the priority setting of the MAC address.
The value 'low' means packet frames send from the MAC address
is forwarded at low priority. The default value is low.rw Enumeration .1.3.6.1.4.1.2272.1.14.8.1.4 |
rcBridgeManualEditStatusThe variable controls the status of a MAC address in the table.
The value 'active' is used to add the MAC address entry into the
table. The value 'invalid' is used to delete the MAC address from
the table.rw Enumeration .1.3.6.1.4.1.2272.1.14.8.1.5 |
rcBridgeManualEditTblSizeUsed to indicate the number of entries in
the manual edit table.ro Integer32 .1.3.6.1.4.1.2272.1.14.9 |
rcBridgeAutoLearnTableThis table contains information of auto-learned MAC address when
the 'unknow MAC discard' table's auto-learn is enabled. User must
explicitly lock and save the table into NVRAM in order to have
this table has the same configuration cross the system reset. SEQUENCE OF RcBridgeAutoLearnEntry .1.3.6.1.4.1.2272.1.14.10 |
rcBridgeAutoLearnEntryEntries in this table are created automatically
when the user explicitly does a lock operation on
the auto-learn-table (i.e., when 'AutoLearnTableMode'
is set to lock(2)). RcBridgeAutoLearnEntry .1.3.6.1.4.1.2272.1.14.10.1 |
rcBridgeAutoLearnAddressThis variable contains the source MAC address of the entries.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2272.1.14.10.1.1 |
rcBridgeAutoLearnPortThis variable contains the port where the MAC address was learned.ro PortSet .1.3.6.1.4.1.2272.1.14.10.1.2 |
rcBridgeAutoLearnMonitorThis variable contains the monitor setting of the MAC address.
The value 'true' means a copy of packet frame that send from or
to the MAC address is forwarded to the designated monitoring port
on the system. This value should be synchronized with the setting
of 'unknow MAC discard' table's 'Default AutoLearnMonitor' setting
when the MAC address was learned.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.14.10.1.3 |
rcBridgeAutoLearnPriorityThis variable contains the priority setting of the MAC address.
The value 'low' means packet frames send from the MAC address is
forwarded at low priority. The value 'high' means packet frames
send from the MAC address is forwarded at high priority. This
value should be synchronized with the setting of 'unknow MAC
discard' table's 'DefaultAutoLearnPriority' setting when the MAC
address was learned.ro Enumeration .1.3.6.1.4.1.2272.1.14.10.1.4 |
rcBridgeAutoLearnActionThis variable is for converting an auto-learned MAC address entry
to a manual edit MAC address entry. This variable provides a mechanism
for user to move a MAC address entry from auto-learn table to manual
edit table.rw Enumeration .1.3.6.1.4.1.2272.1.14.10.1.5 |
rcBridgeAutoLearnTblSizeUsed to indicate the number of entries in
the auto learn table.ro Integer32 .1.3.6.1.4.1.2272.1.14.11 |
rcBridgeStaticMulticastTblSizeUsed to indicate the number of entries in
the static multicast table.roobsolete Integer32 .1.3.6.1.4.1.2272.1.14.13 |
rcRateLimitTable SEQUENCE OF RcRateLimitEntry .1.3.6.1.4.1.2272.1.14.14 |
rcRateLimitEntry RcRateLimitEntry .1.3.6.1.4.1.2272.1.14.14.1 |
rcRateLimitIfIndexPort ifindex.ro InterfaceIndex .1.3.6.1.4.1.2272.1.14.14.1.1 |
rcRateLimitIfTrafficTypeType of traffic allowed.rw Enumeration .1.3.6.1.4.1.2272.1.14.14.1.2 |
rcRateLimitIfEnableTurn on/off rate limiting on this interface.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.14.14.1.4 |
rcRateLimitIfAllowedRatePpsAllowed traffic rate packets per second.
0 means disabledrw Integer32 .1.3.6.1.4.1.2272.1.14.14.1.5 |
rcBridgeStaticMcastTable SEQUENCE OF RcBridgeStaticMcastEntry .1.3.6.1.4.1.2272.1.14.15 |
rcBridgeStaticMcastEntry RcBridgeStaticMcastEntry .1.3.6.1.4.1.2272.1.14.15.1 |
rcBridgeStaticMcastVlanIdVlan Idro INTEGER .1.3.6.1.4.1.2272.1.14.15.1.1 |
rcBridgeStaticMcastAddresssrc mac addr.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2272.1.14.15.1.2 |
rcBridgeStaticMcastForwardingPortsports for forward this macrw PortSet .1.3.6.1.4.1.2272.1.14.15.1.3 |
rcBridgeStaticMcastMltIdslist of mlts this mac will be forwarded onrw IdList -- 1024 octets .1.3.6.1.4.1.2272.1.14.15.1.4 |
rcBridgeStaticMcastNumMltIdsnumber of mlts Idsro Integer32 .1.3.6.1.4.1.2272.1.14.15.1.5 |
rcBridgeStaticMcastRowStatusrow statusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.14.15.1.6 |
rcBridgeFdbProtectTableThis table gives information about the mac learning
limits on a particular port. SEQUENCE OF RcBridgeFdbProtectEntry .1.3.6.1.4.1.2272.1.14.17 |
rcBridgeFdbProtectEntryInformation about a specific MAC address learning
limits of a specific port. RcBridgeFdbProtectEntry .1.3.6.1.4.1.2272.1.14.17.1 |
rcBridgeFdbProtectPortNumThis object is the interface on which MAC address
learning limit is applied.ro InterfaceIndex .1.3.6.1.4.1.2272.1.14.17.1.1 |
rcBridgeFdbProtectMaxMacCountUsed to indicate maximum number of MAC address
that can be learnt on the port.rw Integer32 .1.3.6.1.4.1.2272.1.14.17.1.2 |
rcBridgeFdbProtectMinMacCountUsed to indicate minimum number of MAC address
learnt which mac address learning will be re-enabled
on the port.rw Integer32 .1.3.6.1.4.1.2272.1.14.17.1.3 |
rcBridgeFdbProtectEnableUsed to enable or disable MAC learning limit
feature on the port.rw EnableValue .1.3.6.1.4.1.2272.1.14.17.1.4 |
rcBridgeFdbProtectCurrentMacCountThis object indicates the current number of
MAC address learnt on the port.ro Integer32 .1.3.6.1.4.1.2272.1.14.17.1.5 |
rcBridgeFdbProtectMacLearningThis object indicates whether the port can
currrently learn new MAC addresses or not.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.14.17.1.6 |
rcBridgeFdbProtectViolationLogTrapUsed to enable or disable logging and sending
of snmp trap, once MAC learning limit is reached
for the port.rw EnableValue .1.3.6.1.4.1.2272.1.14.17.1.7 |
rcBridgeFdbProtectViolationDownPortUsed to enable or disable the action of disabling
the port, once MAC learning limit is reached
for the port.rw EnableValue .1.3.6.1.4.1.2272.1.14.17.1.8 |
rcBridgeTpFdbTableThis table is an replacement to the standard
dot1dTpFdbTable in rfc1493. SEQUENCE OF RcBridgeTpFdbEntry .1.3.6.1.4.1.2272.1.14.20 |
rcBridgeTpFdbEntryInformation about a specific unicast MAC address
for which the bridge has some forwarding information. RcBridgeTpFdbEntry .1.3.6.1.4.1.2272.1.14.20.1 |
rcBridgeTpFdbVlanIdUsed to indicate the Vlan ID for this
MAC address. RcVlanIdOrNone .1.3.6.1.4.1.2272.1.14.20.1.1 |
rcBridgeTpFdbAddressA unicast MAC address for which the bridge
has forwarding and/or filtering information. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2272.1.14.20.1.2 |
rcBridgeTpFdbStatusThis object indicates the status of this entry.rw Enumeration .1.3.6.1.4.1.2272.1.14.20.1.3 |
rcBridgeTpFdbPortEither the value '0', or the port number of the
port on which a frame having a source address
equal to the value of the corresponding instance
of rcBridgeTpFdbAddress has been seen. A value of
'0' indicates that the port number has not been
learned but that the bridge does have some
forwarding/filtering information about this
address (e.g. in the dot1dStaticTable).
Implementors are encouraged to assign the port
value to this object whenever it is learned even
for addresses for which the corresponding value of
rcBridgeTpFdbStatus is not learned(3).ro InterfaceIndex .1.3.6.1.4.1.2272.1.14.20.1.4 |
rcBridgeTpFdbSmltRemoteA MAC address indicate for remote learnt,
either local or remote.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.14.20.1.5 |
rcBridgeTpFdbBMacIf the rcBridgeTpFdbEntry is learned from a SPBM network,
instead of using port to track where the rcBridgeTpFdbAddress
come from, the backbone MAC address is used to track that.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2272.1.14.20.1.6 |
rcBridgeRemoteMacTableThis table is for PLSB cvlan UNI remote mac entries SEQUENCE OF RcBridgeRemoteMacEntry .1.3.6.1.4.1.2272.1.14.21 |
rcBridgeRemoteMacEntryInformation about a specific cvlan UNI remote MAC
address for which the bridge has the forwarding
information. RcBridgeRemoteMacEntry .1.3.6.1.4.1.2272.1.14.21.1 |
rcBridgeRemoteMacVlanIdUsed to indicate the Vlan ID for this
MAC address. Integer32 .1.3.6.1.4.1.2272.1.14.21.1.1 |
rcBridgeRemoteMacAddrA customer MAC address for which the bridge
has forwarding and/or filtering information. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2272.1.14.21.1.2 |
rcBridgeRemoteMacStatusThis object indicates the status of this entry.ro Enumeration .1.3.6.1.4.1.2272.1.14.21.1.3 |
rcBridgeRemoteMacDestAddrA provider MAC address for which the bridge
has forwarding and/or filtering information.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2272.1.14.21.1.4 |
rcBridgeRemoteMacPrimaryBVlanIdUsed to indicate the BVlan ID for this
MAC address.ro Integer32 .1.3.6.1.4.1.2272.1.14.21.1.5 |
rcBridgeRemoteMacPrimaryDestSysNamePrimary System name of the node where MAC address entry
come from.ro OCTET STRING .1.3.6.1.4.1.2272.1.14.21.1.6 |
rcBridgeRemoteMacPrimaryPortEither the value '0', or the primary
port on which a frame came from.ro InterfaceIndex .1.3.6.1.4.1.2272.1.14.21.1.7 |
rcBridgeRemoteMacSecondaryBVlanIdUsed to indicate the BVlan ID for this
MAC address.ro Integer32 .1.3.6.1.4.1.2272.1.14.21.1.8 |
rcBridgeRemoteMacSecondaryDestSysNameSecondary System name of the node where MAC address entry
come from.ro OCTET STRING .1.3.6.1.4.1.2272.1.14.21.1.9 |
rcBridgeRemoteMacSecondaryPortEither the value '0', or the secondary
port on which a frame came from.ro InterfaceIndex .1.3.6.1.4.1.2272.1.14.21.1.10 |
rcBridgeRemoteMacSmltRemoteA MAC address indicate for remote learnt from ist peerro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.14.21.1.11 |
rcBoot OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.15 |
rcDevice OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.16 |
rcMlt OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.17 |
rcMltNumMltsThe number of MLTs currently defined in the switch.ro Integer32 .1.3.6.1.4.1.2272.1.17.1 |
rcMltPotentialMembersThe set of ports that are not members of any MLT.ro PortSet .1.3.6.1.4.1.2272.1.17.2 |
rcMltIstSessionEnableUsed to enable/disable mlt functionality.rw EnableValue .1.3.6.1.4.1.2272.1.17.3 |
rcMltIstSessionStatusUsed to enable/disable mlt functionality.ro Enumeration .1.3.6.1.4.1.2272.1.17.4 |
rcMltIstPeerIpIST mlt Peer Ip address.rw IpAddress .1.3.6.1.4.1.2272.1.17.5 |
rcMltIstVlanIdIST mlt Vlan Id. 0 is default when it
is not set, VSP supports 0 to 4084rw INTEGER .1.3.6.1.4.1.2272.1.17.6 |
rcMltTableA list of Multi-Link Trunk entries. The number of
entries is given by rcMltNumMlts. SEQUENCE OF RcMltEntry .1.3.6.1.4.1.2272.1.17.10 |
rcMltEntryEntry containing configuration information for a
particular Multi-Link Trunk. RcMltEntry .1.3.6.1.4.1.2272.1.17.10.1 |
rcMltIdA value that uniquely identifies the Multi-Link
Trunk associated with this entry.ro INTEGER .1.3.6.1.4.1.2272.1.17.10.1.1 |
rcMltNameAn administratively-assigned name for this MLT.rw DisplayString .1.3.6.1.4.1.2272.1.17.10.1.2 |
rcMltPortMembersThe set of ports that are members of this MLT.rw PortSet .1.3.6.1.4.1.2272.1.17.10.1.3 |
rcMltPortTypeThe type of MLT port: access(1) or trunk(2).rw Enumeration .1.3.6.1.4.1.2272.1.17.10.1.4 |
rcMltNumVlanIdsUsed to indicate the number of VLAN IDs that
are stored in the rcMltVlanIds variable.ro Integer32 .1.3.6.1.4.1.2272.1.17.10.1.5 |
rcMltRowStatusUsed to create/delete entries in the rcMltTable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.17.10.1.7 |
rcMltEnableEnable the entry.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.17.10.1.8 |
rcMltLoadBalancePerform load balance?rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.17.10.1.9 |
rcMltIfIndexUsed to indicate the 'logical' ifIndex assigned to
this MLT.ro InterfaceIndex .1.3.6.1.4.1.2272.1.17.10.1.11 |
rcMltMltTypeMLT type.rw Enumeration .1.3.6.1.4.1.2272.1.17.10.1.12 |
rcMltRunningTypeSplit MLT running type.ro Enumeration .1.3.6.1.4.1.2272.1.17.10.1.14 |
rcMltMulticastDistributionEnable/Disable multicast distribution per mlt.rw EnableValue .1.3.6.1.4.1.2272.1.17.10.1.16 |
rcMltAggregatableEnable/Disable link aggregation on a MLT.rw EnableValue .1.3.6.1.4.1.2272.1.17.10.1.18 |
rcMltClearLinkAggregateclear link aggregate, equivalent to disable and
re-enable aggregatable on the MLT.rw Enumeration .1.3.6.1.4.1.2272.1.17.10.1.19 |
rcMltDesignatedPortIndicates the Designated port for the MLT.ro InterfaceIndex .1.3.6.1.4.1.2272.1.17.10.1.21 |
rcMltAggOperStateLink aggregation state on a MLT.ro EnableValue .1.3.6.1.4.1.2272.1.17.10.1.22 |
rcMltAggTimeOfLastOperChangeThe time value since the interface entered its
current operational state.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2272.1.17.10.1.23 |
rcMltPeerPortMembersThe set of Peer ports which are connected to local ports
(rcMltPortMember) of this MLTro PortSet .1.3.6.1.4.1.2272.1.17.10.1.39 |
rcMltCpLimitPktRateUsed to limit Control packets on the
port to qos-levels 6 and 7.
Sets the limit in packets per second.rw INTEGER .1.3.6.1.4.1.2272.1.17.10.1.40 |
rcMltCpLimitShutDownEnableUsed to indicate if the mlt-ports should be
shutdown when the CpLimitPktRate is exceeded.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.17.10.1.41 |
rcMltVlanIdListThis bitfield is used to identify which VLANs this MLT
is associated with. Each VLAN ID is stored as a bit.
The most-significant (left-most) bit represents Vlan Id 1.rw OCTET STRING .1.3.6.1.4.1.2272.1.17.10.1.42 |
rcMltEntryOwnerDefines the owner of the MLT.ro Enumeration .1.3.6.1.4.1.2272.1.17.10.1.43 |
rcMltDatapathProgrammingStateDefines the datapath programming state of
the MLT.ro Enumeration .1.3.6.1.4.1.2272.1.17.10.1.44 |
rcMltMcastDistribution OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.17.11 |
rcMltMcastDistributionEnableUsed to enable/disable this feature to
distribute multicast traffic on MLT ports. All
the cards in the system must be E-Tickets.
Cannot perform distribution in a mixed mode.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.17.11.1 |
rcMltMcastDistributionGrpMaskGroup Mask. Create a MLT abstraction layer to
distribute traffic basd on (source, group) information
of the multicast packet. The algorithm to pick
the actual port nedds to generate a fairly random
number for different combinations but a lways generate
the same number for a given (source, group) pair. By
default, the number of active ports of the MLT is used
to MOD the pseudo-random number generated by the XOR
of each byte of the masked group address with the
masked source address.rw IpAddress .1.3.6.1.4.1.2272.1.17.11.2 |
rcMltMcastDistributionSrcMaskSource Mask.rw IpAddress .1.3.6.1.4.1.2272.1.17.11.3 |
rcMltMcastDistributionRedistributionEnableEnable redistribution.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.17.11.4 |
rcWeb OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.18 |
rcWebEnableServerControl whether the web server should be enabled.
Setting this variable to true will make the server
operational. Setting this variable to false will
disable server.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.18.1 |
rcWebRWAUserNameUser name for the read-write-all web-server account.rw DisplayString .1.3.6.1.4.1.2272.1.18.2 |
rcWebRWAPasswordPassword for the read-write-all web-server account.rw DisplayString .1.3.6.1.4.1.2272.1.18.3 |
rcWebRWUserNameUser name for the read-write web-server account.rw DisplayString .1.3.6.1.4.1.2272.1.18.4 |
rcWebRWPasswordPassword for the read-write web-server account.rw DisplayString .1.3.6.1.4.1.2272.1.18.5 |
rcWebROUserNameUser name for the read-only web-server account.rw DisplayString .1.3.6.1.4.1.2272.1.18.6 |
rcWebROPasswordPassword for the read-only web-server account.rw DisplayString .1.3.6.1.4.1.2272.1.18.7 |
rcWebLastChangeLast web-browser initiated configuration
change since sysUpTime.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2272.1.18.8 |
rcWebNumHitsNumber of hits to the web-serverro Integer32 .1.3.6.1.4.1.2272.1.18.9 |
rcWebNumAccessChecksNumber of access checks performed by the web-serverro Integer32 .1.3.6.1.4.1.2272.1.18.10 |
rcWebNumAccessBlocksNumber of accesses blocked by the web-serverro Integer32 .1.3.6.1.4.1.2272.1.18.11 |
rcWebNumRxErrorsNumber of receive errors encountered by the web-serverro Integer32 .1.3.6.1.4.1.2272.1.18.12 |
rcWebNumTxErrorsNumber of transmit errors encountered by the web-serverro Integer32 .1.3.6.1.4.1.2272.1.18.13 |
rcWebNumSetRequestNumber of set-request to the web-serverro Integer32 .1.3.6.1.4.1.2272.1.18.14 |
rcWebPrimaryHtmlSourceDirprimary html source directoryrw DisplayString .1.3.6.1.4.1.2272.1.18.15 |
rcWebSecondaryHtmlSourceDirsecondary html source directoryrw DisplayString .1.3.6.1.4.1.2272.1.18.16 |
rcWebTertiaryHtmlSourceDirtertiary html source directoryrw DisplayString .1.3.6.1.4.1.2272.1.18.17 |
rcWebRWL3UserNameuser name for the L3 web server accountrw DisplayString .1.3.6.1.4.1.2272.1.18.18 |
rcWebRWL3Passwordpassword for the L3 web server accountrw DisplayString .1.3.6.1.4.1.2272.1.18.19 |
rcWebRWL2UserNameuser name for the L2 web server accountrw DisplayString .1.3.6.1.4.1.2272.1.18.20 |
rcWebRWL2Passwordpassword for the L2 web server accountrw DisplayString .1.3.6.1.4.1.2272.1.18.21 |
rcWebDefaultDisplayRowsdefault display rows in html page.rw INTEGER .1.3.6.1.4.1.2272.1.18.22 |
rcWebLastHostAccessBlockedlast host access blockedro IpAddress .1.3.6.1.4.1.2272.1.18.23 |
rcWebHelpTftpSourceDirtftp source directory for help filesrw OCTET STRING .1.3.6.1.4.1.2272.1.18.24 |
rcWebHttpPortthe HTTP port for web accessrw INTEGER (80 | 1024..49151) .1.3.6.1.4.1.2272.1.18.25 |
rcWebSecureOnlyControl whether the secure only should be enabled.
Setting this variable to true will make the server
support HTTPS only. Setting this variable to false
will make the server support both HTTP & HTTPSrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.18.26 |
rcWebHttpsPortthe HTTPs port for web accessrw Integer32 (443 | 1024..49151) .1.3.6.1.4.1.2272.1.18.27 |
rcCli OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.19 |
rcCliRWAUserNameUser name for the read-write-all CLI account.rw DisplayString .1.3.6.1.4.1.2272.1.19.1 |
rcCliRWAPasswordPassword for the read-write-all CLI account.rw DisplayString .1.3.6.1.4.1.2272.1.19.2 |
rcCliRWUserNameUser name for the read-write CLI account.rw DisplayString .1.3.6.1.4.1.2272.1.19.3 |
rcCliRWPasswordPassword for the read-write CLI account.rw DisplayString .1.3.6.1.4.1.2272.1.19.4 |
rcCliRWL3UserNameUser name for the read-write layer-3 CLI account.rw DisplayString .1.3.6.1.4.1.2272.1.19.5 |
rcCliRWL3PasswordPassword for the read-write layer-3 CLI account.rw DisplayString .1.3.6.1.4.1.2272.1.19.6 |
rcCliRWL2UserNameUser name for the read-write layer-2 CLI account.rw DisplayString .1.3.6.1.4.1.2272.1.19.7 |
rcCliRWL2PasswordPassword for the read-write layer-2 CLI account.rw DisplayString .1.3.6.1.4.1.2272.1.19.8 |
rcCliROUserNameUser name for the read-only CLI account.rw DisplayString .1.3.6.1.4.1.2272.1.19.9 |
rcCliROPasswordPassword for the read-only CLI account.rw DisplayString .1.3.6.1.4.1.2272.1.19.10 |
rcCliMaxTelnetSessionsUsed to indicate the maximum number of telnet
sessions the system will support.rw INTEGER .1.3.6.1.4.1.2272.1.19.11 |
rcCliMaxRloginSessionsUsed to indicate the maximum number of rlogin
sessions the system will support.rw INTEGER .1.3.6.1.4.1.2272.1.19.12 |
rcCliTimeoutUsed to indicate the amount of idle time, in
seconds to wait before timing out telnet and
rlogin sessions.rw INTEGER .1.3.6.1.4.1.2272.1.19.13 |
rcCliNumAccessViolationsUsed to indicate the number of CLI access
violations detected by the system.ro Integer32 .1.3.6.1.4.1.2272.1.19.14 |
rcCliRWL1UserNameUser name for the read-write layer-1 CLI account.rw DisplayString .1.3.6.1.4.1.2272.1.19.15 |
rcCliRWL1PasswordPassword for the read-write layer-1 CLI account.rw DisplayString .1.3.6.1.4.1.2272.1.19.16 |
rcCliPasswordChangeUsed to indication which password is changed when
sending a rcCliPasswordChange trap.ro Enumeration .1.3.6.1.4.1.2272.1.19.17 |
rcCliPassChangeResultUsed to indication the result of changing password when
sending a rcPasswordChange trap.ro Enumeration .1.3.6.1.4.1.2272.1.19.18 |
rcCliRWEnableEnable/Disable for the read-write CLI account.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.19.19 |
rcCliRWL1EnableEnable/Disable for the read-write-layer1 CLI
account.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.19.20 |
rcCliRWL2EnableEnable/Disable for the read-write-layer2 CLI
account.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.19.21 |
rcCliRWL3EnableEnable/Disable for the read-write-layer3 CLI
account.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.19.22 |
rcCliROEnableEnable/Disable for the read-only CLI account.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.19.23 |
rcError OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.20 |
rcErrorLevelError level indicator for the last error
reported in the system. The meaning of
this value are :
0 = Informative Information
1 = Warning Condition
2 = Error Condition
3 = Manufacturing Information
4 = Fatal Conditionro Integer32 .1.3.6.1.4.1.2272.1.20.1 |
rcErrorCodeError code indicator for the last error
reported in the system. This is an encoded
value that identifies the software module
that generated the error message as well as
a specific error condition within that module.
This value is transparent to the user. This
value is intended to help Accelar support and
development staff to isolate system problems.ro Integer32 .1.3.6.1.4.1.2272.1.20.2 |
rcErrorTextError string of the last error reported
in the system.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2272.1.20.3 |
rcErrorReturnCodeThis variable is used primarily as an enumeration
to list the proprietary return codes that this
device can send to a management station in
response to a failed SNMP operation.ro Enumeration .1.3.6.1.4.1.2272.1.20.4 |
rcErrorSendTrapIndicates whether to send trap upon receiving an
error in the system.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.20.5 |
rcTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.21 |
rcTrapsMib OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.21.0 |
rcnCardDownA rcnCardDown trap signifies that the SNMPv2 entity,
acting in an agent role, has detected that the
rcCardOperStatus object for one of its cards
is about to transition into the down state. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.1 |
rcnCardUpA rcnCardUp trap signifies that the SNMPv2 entity,
acting in an agent role, has detected that the
rcCardOperStatus object for one of its cards
is about to transition into the up state. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.2 |
rcnErrorNotificationA rcnErrorNotification trap signifies that the
SNMPv2 entity, acting in an agent role, has
detected that an error condition has occured. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.3 |
rcnStpNewRootA rcnStpNewRoot trap signifies that the
SNMPv2 entity, acting in an agent role, has
detected the Spanning Tree Protocol has declared
the device to be the new root of the spanning
tree. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.4 |
rcnStpTopologyChangeA rcnStpTopologyChange trap signifies that the
SNMPv2 entity, acting in an agent role, has
detected the Spanning Tree Protocol has gone due
a topology change event. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.5 |
rcnChasPowerSupplyDownA rcnChasPowerSupplyDown trap signifies that the
SNMPv2 entity, acting in an agent role, has
detected that the rcChasPowerSupplyOperStatus
object for one of its power supply unit is
about to transition into the down state. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.6 |
rcnChasFanDownA rcnChasFanDown trap signifies that the
SNMPv2 entity, acting in an agent role, has
detected that the rcChasFanOperStatus object
for one of its power supply unit is about to
transition into the down state. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.7 |
rcnLinkOscillationA rcnLinkOscillation trap signifies that the
SNMPv2 entity, acting in an agent role, has
detected an excessive number of link state
transitions on the specified port. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.8 |
rcnMacViolationA rcnMacViolation trap signifies that the
SNMPv2 entity, acting in an agent role, has
received a PDU with an invalid source MAC
address. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.9 |
rcnSonetTrapA rcnSonetTrap trap signifies that the
SNMPv2 entity, acting in an agent role, has
detected a change of status on a Sonet port. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.10 |
rcn2kCardDownA rcnCardDown trap signifies that the SNMPv2 entity,
acting in an agent role, has detected that the
rcCardOperStatus object for one of its cards
is about to transition into the down state. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.11 |
rcn2kCardUpA rcnCardUp trap signifies that the SNMPv2 entity,
acting in an agent role, has detected that the
rcCardOperStatus object for one of its cards
is about to transition into the up state. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.12 |
rcn2kTemperatureA rcn2kTemperature trap signifies that the SNMPv2
entity, acting in an agent role, has detected the
chassis is over-heating. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.13 |
rcnChasPowerSupplyUpA rcnChasPowerSupplyUp trap signifies that the
SNMPv2 entity, acting in an agent role, has
detected that the rcChasPowerSupplyOperStatus
object for one of its power supply unit is
about to transition into the up state. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.14 |
rcn2kAtmPvcLinkStateChangeA rcn2kAtmPvcLinkStateChange trap signifies that the
SNMPv2 entity, acting in an agent role, has detected
that the rc2kAtmPvcOamVcStatus object for one of PVC is
about to transition into different state, either from
up to down or from down to up. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.15 |
rcnStpTCNA rcnStpTopologyChange trap signifies that the
SNMPv2 entity, acting in an agent role, has
detected the Spanning Tree Protocol has gone due
a topology change event. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.16 |
rcnSmltIstLinkUpA rcnSmltIstLinkUp trap signifies that the split
MLT link is from down to up. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.17 |
rcnSmltIstLinkDownA rcnSmltIstLinkDown trap signifies that the
split MLT link is from up to down. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.18 |
rcnSmltLinkUpA rcnMltSmltId trap signifies that the split
SMLT link is up. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.19 |
rcnSmltLinkDownA rcMltSmltId trap signifies that the split
SMLT link is down. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.20 |
rcnChasFanUpA rcnChasFanUp trap signifies that the
SNMPv2 entity, acting in an agent role, has
detected that the rcChasFanOperStatus object
for one of its power supply unit is about to
transition into the up state. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.21 |
rcnPasswordChangeA rcnPasswordChange trap signifies that the
SNMPv2 entity, acting in an agent role, has
detected that the one of the cli password is
changed. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.22 |
rcnEmErrorA rcnEmError trap signifies that the
SNMPv2 entity, acting in an agent role, has
detected Em error. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.23 |
rcnPcmciaCardRemovedA rcnPcmciaRemoved trap signifies that the
SNMPv2 entity, acting in an agent role, has
detected that the PCMCIA card is being removed. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.25 |
rcnSmartCpldTimerFiredA rcnSmartCpldTimerFired trap signifies that the
cpld timer fired. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.26 |
rcnCardCpldNotUpDateA rcnCardCpldNotUpDate trap signifies that the
cpld is not up to date. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.27 |
rcnIgapLogFileFullA rcnIgapLogFileFull trap signifies that the
Igap accounting time-out Log File reach the
maximum. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.28 |
rcnCpLimitShutDownA rcnCpLimitShutDown trap signifies that the
cp limit for the port is shutting down. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.29 |
rcnSshServerEnabledA rcnSshServerEnabled trap signifies that the
SSH server is enabled. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.30 |
rcnSshServerDisabledA rcnSshServerDisabled trap signifies that the
SSH server is disabled. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.31 |
rcnSshSessionLoginA rcnSshSessionLogin trap signifies that there
is a SSH session login.
It's deprecated by rcnaSshSessionLogin. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.32 |
rcnSshSessionLogoutA rcnSshSessionLogout trap signifies that there
is a SSH session logout.
It's deprecated by rcnaSshSessionLogout. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.33 |
rcnSshUnauthorizedAccessA rcnSshUnauthorizedAccess trap signifies that
an unauthorized access has occured.
It's deprecated by rcnaSshUnauthorizedAccess. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.34 |
rcnHaCpuStateA rcnHaCpuState trap signifies that the
state of the HA-CPU. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.35 |
rcnInsufficientMemoryA rcnInsufficientMemory trap indicates insufficient memory on
CPU blade for proper operation. Recommended memory = 256 MB
available through Nortel Networks upgrade kit NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.36 |
rcnSaveConfigActionA rcnSaveConfigAction trap indicates the switch run
time or boot configuration is being saved NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.37 |
rcnLoopDetectOnPortA rcnLoopDetectOnPort trap indicates that a loop has
been detected on a port. The vlan on that port will
be disabled. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.38 |
rcnbgpEstablishedThe BGP Established event is generated when
the BGP FSM enters the ESTABLISHED state. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.39 |
rcnbgpBackwardTransitionThe BGPBackwardTransition Event is generated
when the BGP FSM moves from a higher numbered
state to a lower numbered state. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.40 |
rcnAggLinkUpA rcnAggLinkUp trap is generated when the operational
state of the aggregator changes from down to up. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.41 |
rcnAggLinkDownA rcnAggLinkDown trap is generated when the operational
state of the aggregator changes from up to down. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.42 |
rcnIgmpNewGroupMemberAn IgmpNewGroupMember trap signifies that a
new member has come on an interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.43 |
rcnIgmpLossGroupMemberAn IgmpLossGroupMember trap signifies that a
group member has been lost on an interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.44 |
rcnIgmpNewQuerierAn igmpNewQuerier trap signifies that a new
querier has come up on an interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.45 |
rcnIgmpQuerierChangeAn rcnIgmpQuerierChange trap signifies that
the querier has changed. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.46 |
rcnDvmrpIfStateChangeA rcnDvmrpIfStateChange trap signifies that there
has been a change in the state of a DVMRP
interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.47 |
rcnDvmrpNewNbrChangeA rcnDvmrpNewNbrChange trap signifies that a new
neighbor has come up on a DVMRP interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.48 |
rcnDvmrpNbrLossChangeA rcnDvmrpNbrLossChange trap signifies that a new
neighbor has gone down on a DVMRP interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.49 |
rcnFdbProtectViolationThe rcnFdbProtectViolation trap signifies that the
has violated the user configured limit for total
number of fdb-entries learned on that port. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.59 |
rcnLogMsgControlA rcnLogMsgControl trap signifies whether the number of times of
repeatation of the particular Log message has exceeded
the particular frequency/count or not. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.60 |
rcnSaveConfigFileA rcnSaveConfig trap signifies that either the
runtime config or the boot config has been saved
on the switch NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.61 |
rcnDNSRequestResponseA rcnDnsRequestResponse trap signifies that the
switch had sent a query to the DNS server or it had
received a successful response from the DNS Server NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.62 |
rcnDuplicateIpAddressA rcnDuplicateIpAddress trap signifies that a duplicate IP
address is detected on the subnet. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.63 |
rcnLoopDetectPortDownA rcnLoopDetectPortDown trap signifies that a loop has been
detected on a port and the port is going to shut down. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.64 |
rcnLoopDetectMacDiscardA rcnLoopDetectMacDiscard trap signifies that a loop
has been Detected on a port and the mac address will
be discarded on all ports in that vlan NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.67 |
rcnAutoRecoverPortA rcnAutoRecoverPort trap signifies that autorecover
has re-enabled a port disabled by link flap or cp limit NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.68 |
rcnAutoRecoverLoopDetectedPortA rcnAutoRecoverPort trap signifies that autorecover
has cleared the action taken on a port by loop detect NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.69 |
rcnExtCpLimitShutDownA rcnExtCpLimitShutDown trap signifies that
port is shut down due to Extended CP-Limit. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.70 |
rcnExtCpLimitSopCongestionA rcnExtCpLimitSopCongestion signifies that system octapid
polling finds that system octapid is congested or not.
rcSysExtCplimitSysOctapidCongested signifies whether
system octapid is congested or not.
rcSysExtCplimitPortsMonitored signifies whether ports are
selected for monitoring the ingress traffic utilization. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.71 |
rcnTacacsAuthFailureTACACS+ authentication failed for user NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.74 |
rcnTacacsNoServersUnable to use any TACACS+ servers for authentication NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.75 |
rcnTacacsRxUnsupportedFrameReceived unsupported frame from TACACS+ server NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.76 |
rcnTacacsExceededMaxLoginsAttempted to exceed the maximum number of allowed TACACS+ logins NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.77 |
rcnTacacsClientFailureTACACS+ Client application is down NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.78 |
rcnVlacpPortDownA rcnVlacpPortDown trap signifies that
Vlacp is down on the port specified. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.80 |
rcnVlacpPortUpA rcnVlacpPortUp trap signifies that
Vlacp is Up on the port specified. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.81 |
rcnExtCpLimitShutDownNormalAn rcnExtCpLimitShutDownNormal trap signifies that
Ports are shut down due to Extended CP-Limit in Normal
mode. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.82 |
rcnEapMacIntrusionA rcnEapMacIntrusion trap signifies that
an EAP MAC intrusion has occured on this Port. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.83 |
rcnInterCpuCommStatusA rcnInterCpuCommStatus trap signifies the
current communication status between primary
and secondary CPU. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.84 |
rcPlugOptModTemperatureStatusTrapUsed to trap changes in the temperature status NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.89 |
rcPlugOptModVoltageStatusTrapUsed to trap changes in the voltage level NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.90 |
rcPlugOptModBiasStatusTrapUsed to trap changes in the laser bias status NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.91 |
rcPlugOptModTxPowerStatusTrapUsed to trap changes in the transmit power status NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.92 |
rcPlugOptModRxPowerStatusTrapUsed to trap changes in the received power status NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.93 |
rcPlugOptModAux1StatusTrapUsed to trap changes in the Aux1 status NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.94 |
rcPlugOptModAux2StatusTrapUsed to trap changes in the Aux2 status NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.95 |
rcnMaxRouteWarnClearA rcnMaxRouteWarnClear trap signifies that
the number of routes in the routing table of
the Virtual Router has droped below its
warning threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.110 |
rcnMaxRouteWarnSetA rcnMaxRouteWarnSet trap signifies that
the given Virtual Routers routing table is
reaching its maximum size. Action should be
taken to prevent this NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.111 |
rcnMaxRouteDropClearA rcnMaxRouteDropClear signifies that
the given Virtual Routers routing table is
no longer dropping new routes as it is below
its maximum size. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.112 |
rcnMaxRouteDropSetA rcnMaxRouteDropSet trap signifies that
the given Virtual Routers routing table has
reached its maximum size, and is now dropping
all new non static routes. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.113 |
rcnMstpNewCistRootA rcnMstpNewCistRoot trap signifies that the
SNMPv2 entity, acting in an agent role, has
detected the Multiple Spanning Tree Protocol has
declared the device to be the new root of the common
internal spanning tree. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.117 |
rcnMstpNewMstiRootA rcnMstpNewMstiRoot signifies that the
SNMPv2 entity, acting in an agent role, has
detected the Multiple Spanning Tree Protocol has
declared the device to be the new root of the
spanning tree instance. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.118 |
rcnMstpNewCistRegionalRootA rcnMstpNewCistRegionalRoot trap signifies that the
SNMPv2 entity, acting in an agent role, has
detected the Multiple Spanning Tree Protocol has
declared the device to be the new regional root of
the common internal spanning tree. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.119 |
rcnRstpNewRootA rcnRstpNewRoot signifies that the
SNMPv2 entity, acting in an agent role, has
detected the Rapid Spanning Tree Protocol has
declared the device to be the new root of the
spanning tree. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.120 |
rcnRsmltEdgePeerModifiedA rcnRsmltEdgePeerModified signifies that
the RSMLT Peer address is different from
that of the stored address. Save config is
necessary if EdgeSupport has to use this info
on next reboot. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.124 |
rcnTmuxParityErrorA rcnTmuxParityError trap identifies a problem in the FAD
/SWIP based on the number of parity errors. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.165 |
rcnChasPowerSupplyNoRedundancyA rcnChasPowerSupplyNoRedundancy signifies that
the chassis is running on power supply without
redundancy. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.167 |
rcnChasPowerSupplyRedundancyA rcnChasPowerSupplyRedundancy signifies that
the chassis is running on power supply with
redundancy. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.168 |
rcnLicenseTrialPeriodExpiredA rcnLicenseTrialPeriodExpired signifies that
Trial Period License has expired. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.171 |
rcnLicenseTrialPeriodExpiryA rcnLicenseTrialPeriodExpiry signifies
the time remaining before License Trial Period
expires in days. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.172 |
rcnVrfUpThis notification is generated when the specified
VRF's operational status is toggled from down to up. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.173 |
rcnVrfDownThis notification is generated when the specified
VRF's operational status is toggled from up to down. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.174 |
rcnMrouteIngressThresholdExceededThis notification is generated when the number of
mroute ingress records exceeds the ingress threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.175 |
rcnMrouteEgressThresholdExceededThis notification is generated when the number of
mroute egress records exceeds the egress threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.176 |
rcnRemoteMirroringStatusA rcnRemoteMirroringStatus trap signifies whether
the remote mirroring is enabled
or disabled on a particular port NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.177 |
rcnChasPowerSupplyRunningLowA rcnChasPowerSupplyRunningLow signifies that
the chassis is running on low power supply. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.185 |
rcnIsisPlsbMetricMismatchTrapA PLSB ISIS trap signifies that a LSP with a different
value of l1-metric is received NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.192 |
rcnIsisPlsbDuplicateSysidTrapA PLSB ISIS trap signifies that a Hello packet with a
duplicate system-id is received NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.193 |
rcnIsisPlsbLsdbUpdateTrapA PLSB ISIS trap signifies that LSDB information has
changed NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.194 |
rcnChasFanCoolingLowA rcnChasFanCoolingLow signifies that
the chassis is running on low fan cooling. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.196 |
rcnAuthenticationSuccessA rcnAuthenticationSuccess trap signifies that a login
is success. Trap includes login username and host ip.
It's deprecated by rcnaAuthenticationSuccess. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.268 |
rcnCardInsertA rcnCardInsert trap signifies that a card/module
is inserted into the chassis NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.269 |
rcnCardRemoveA rcnCardRemove trap signifies that a card/module
is removed from the chassis NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.270 |
rcnChasFanFailA rcnChasFanFail trap indicates that a fan unit
of a fan tray in a fan zone has fault. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.271 |
rcnChasFanOkA rcnChasFanOk trap indicates that a fan unit
of a fan tray in a fan zone has recovered from
previously detected fan fault. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.272 |
rcnCardOverheatA rcnCardOverheat trap indicates that a card temperature
has exceeded the alarm threshold temperature. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.273 |
rcnCardNormalTempA rcnCardNormalTemp trap indicates that a card
temperature has been cool down from previously detected
overheat condition. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.274 |
rcnCardOverheatShutDownA rcnCardOverheatShutDown trap indicates that a card
has been shut down due to persistent temperature overheat
for 15 minutes or temperature has exceeded the shut down
threshold temperature. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.275 |
rcnCardCpuUtilizationHighA rcnCardCpuUtilizationHigh trap indicates that 5-minute
CPU utilization average on this slot is above 90%. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.276 |
rcnCardCpuUtilizationNormalA rcnCardCpuUtilizationNormal trap indicates that 5-minute
CPU utilization average on this slot is below 75%. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.277 |
rcnIsisPlsbBvidMismatchTrapA PLSB ISIS trap signifies that a Hello packet with mismatched
B-VIDs is received NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.278 |
rcnIsisPlsbSmltVirtBmacMismatchTrapA PLSB ISIS trap signifies that Virtual BMAC configured in the switch
is different from virtual BMAC configured in the IST peer NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.279 |
rcnIsisPlsbSmltPeerBmacMismatchTrapA PLSB ISIS trap signifies that either the Smlt Peer BMAC configured
in the IST peer is different from the ISIS SystemId of the local switch OR
The Smlt peer BMAC configured in the local switch is different from
the ISIS systemId of the IST peer NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.280 |
rcnIsisPlsbAdjStateTrapA PLSB ISIS trap signifies ISIS adjacency state change. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.281 |
rcnIsisPlsbDuplicateNnameTrapA PLSB ISIS trap signifies that a LSP with duplicate
nickname is received, this trap should be generated
by all the switches in the network. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.282 |
rcnIsisPlsbSmltSplitBebMismatchTrapA PLSB ISIS trap signifies that the Smlt Split-Beb configured in the local
switch and IST peer are same. One IST switch shoule be configured as
Split-Beb primary and the IST peer should be configured as Split-Beb
secondary. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.283 |
rcnIsisPlsbMultiLinkAdjTrapA PLSB ISIS trap signifies that multiple ISIS adjacencies are formed with
the same ISIS node. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.284 |
rcnaSshSessionLogoutA rcnaSshSessionLogout trap signifies that there
is a SSH session logout. This trap deprecates the
rcnSshSessionLogout trap. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.285 |
rcnaSshUnauthorizedAccessA rcnaSshUnauthorizedAccess trap signifies that
an unauthorized access has occured. This trap
deprecates the rcnSshUnauthorizedAccess trap. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.286 |
rcnaAuthenticationSuccessA rcnaAuthenticationSuccess trap signifies that a login
is success. Trap includes login username and address
type and inet address. This trap deprecates the
rcnAuthenticationSuccess trap. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.287 |
rcnaSshSessionLoginA rcnaSshSessionLogin trap signifies that there
is a SSH session login. This trap deprecates the
rcnSshSessionLogin trap. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.288 |
rcSyslog OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.22 |
rcSyslogGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.22.1 |
rcSyslogGlobalEnableUsed to enable/disable the SysLog feature. When
enabled this feature will send a message to a server
on a network that this configured to receive and
store diagnostic messages from this device. The
type of messages sent is user configurable.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.22.1.1 |
rcSyslogGlobalMaxHostsMaximun number of remote hosts considered 'active'
and able to receive messages from the Syslog service
on the router.rw INTEGER .1.3.6.1.4.1.2272.1.22.1.2 |
rcSyslogGlobalOperStateThe operational state of the syslog service
on the router.ro Enumeration .1.3.6.1.4.1.2272.1.22.1.3 |
rcSyslogGlobalHeaderThe IP Header Type for the Syslog Packet.rw Enumeration .1.3.6.1.4.1.2272.1.22.1.4 |
rcSyslogHostTblTable of remote host destinations for syslog. SEQUENCE OF RcSyslogHostEntry .1.3.6.1.4.1.2272.1.22.2 |
rcSyslogHostEntryEntry containing information for a particular
entry in rcSyslogHostTable. RcSyslogHostEntry .1.3.6.1.4.1.2272.1.22.2.1 |
rcSyslogHostIdHost Id.ro INTEGER .1.3.6.1.4.1.2272.1.22.2.1.1 |
rcSyslogHostIpAddrHost Ip Addressrwdeprecated IpAddress .1.3.6.1.4.1.2272.1.22.2.1.2 |
rcSyslogHostUdpPortSpecifies the UDP port to use to send syslog
messages to the host.rw INTEGER .1.3.6.1.4.1.2272.1.22.2.1.3 |
rcSyslogHostFacilitySpecifies the UNIX facility used in messages
to the syslog host. Default is LOCAL7.rw Enumeration .1.3.6.1.4.1.2272.1.22.2.1.4 |
rcSyslogHostModuleIdSpecifies for which modules/tasks syslog messages
should be sent. Default is all modules/tasks.rw Enumeration .1.3.6.1.4.1.2272.1.22.2.1.5 |
rcSyslogHostModuleId2Specifies for which modules/tasks syslog messages
should be sent. Default is all modules/tasks.rw Integer32 .1.3.6.1.4.1.2272.1.22.2.1.6 |
rcSyslogHostSeveritySpecifies the severity level for which syslog messages
should be sent for the modules specifies in
'SyslogHostModule'.
Value is one of multiple (logical 'OR') of the following:
info(1),
warning(2),
error(4),
mfg(8),
fatal(16).rw INTEGER .1.3.6.1.4.1.2272.1.22.2.1.7 |
rcSyslogHostMapInfoSeveritySpecifies the syslog severity to use for Accelar
INFO messages. Default is INFO.rw Enumeration .1.3.6.1.4.1.2272.1.22.2.1.8 |
rcSyslogHostMapWarningSeveritySpecifies the syslog severity to use for Accelar
WARNING messages. Default is WARNING. Should be
<= INFO.rw Enumeration .1.3.6.1.4.1.2272.1.22.2.1.9 |
rcSyslogHostMapErrorSeveritySpecifies the syslog severity to use for Accelar
ERROR messages. Default is ERROR. Should be
<= WARNING.rw Enumeration .1.3.6.1.4.1.2272.1.22.2.1.10 |
rcSyslogHostMapMfgSeveritySpecifies the syslog severity to use for Accelar
Manufactoring messages. Dafault is ERROR.rw Enumeration .1.3.6.1.4.1.2272.1.22.2.1.11 |
rcSyslogHostMapFatalSeveritySpecifies the syslog severity to use for Accelar
FATAL messages. Default is EMERGENCY. Should be
<= ERROR.rw Enumeration .1.3.6.1.4.1.2272.1.22.2.1.12 |
rcSyslogHostMapTraceMsgSpecifies the syslog severity to use for syslog
trace messages. Default is DEBUG.rw Enumeration .1.3.6.1.4.1.2272.1.22.2.1.13 |
rcSyslogHostMapTrapMsgSpecifies the UNIX severity code to use for syslog
messages for SNMP traps sent to the syslog host.
Default is INFO.rw Enumeration .1.3.6.1.4.1.2272.1.22.2.1.14 |
rcSyslogHostLogTraceMsgsIndicate whether to activate the host to log the
syslog trace messages.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.22.2.1.15 |
rcSyslogHostLogTrapMsgsIndicate whether to activate the host to log the
syslog messages for SNMP traps.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.22.2.1.16 |
rcSyslogHostEnableEnable/Disable messages to be sent to syslog host.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.22.2.1.17 |
rcSyslogHostRowStatusUsed to create/delete entries in the rcSyslogTable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.22.2.1.18 |
rcSyslogHostAddressTypeAddress Type of the Host.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2272.1.22.2.1.19 |
rcSyslogHostAddressAddress of the Host.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2272.1.22.2.1.20 |
rcDiag OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.23 |
rcDiagMirrorByPortTableThis table is used to configure the Mirror By
Port feature. This feature allows the device
to forward a copy of each packet seen on a
particular port to a different port. SEQUENCE OF RcDiagMirrorByPortEntry .1.3.6.1.4.1.2272.1.23.1 |
rcDiagMirrorByPortEntryEntry containing mirror by port information. RcDiagMirrorByPortEntry .1.3.6.1.4.1.2272.1.23.1.1 |
rcDiagMirrorByPortIdEntry id.ro INTEGER .1.3.6.1.4.1.2272.1.23.1.1.1 |
rcDiagMirrorByPortMirroredPortUsed to configure the 'mirrored' port. The port
where packets are copied from.rw InterfaceIndex .1.3.6.1.4.1.2272.1.23.1.1.2 |
rcDiagMirrorByPortMirroringPortUsed to configure the 'mirroring' port. The port
where packets are copied to.rw InterfaceIndex .1.3.6.1.4.1.2272.1.23.1.1.3 |
rcDiagMirrorByPortModeUsed to configure the 'mode' of the mirror operation.
'tx' means packets being transmitted on the 'mirrored'
port will be copied. 'rx' means packets received on
the 'mirrored' port will be copied. 'both' means
all traffic on the 'mirrored' port will be copied.
'rxFilter' means packets received on the 'mirrored'
port is copied only if it macthes filter criteria.
'txFilter' means packets being transmitted on the
'mirrorred' port is copied only if it matches filter
criteria. 'bothFilter' means both ingress and egress
traffic will be copied if it matches either ingress or
egress filter on the 'mirrored' port.rw Enumeration .1.3.6.1.4.1.2272.1.23.1.1.4 |
rcDiagMirrorByPortEnableUsed to enable/disable this entry.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.23.1.1.5 |
rcDiagMirrorByPortRowStatusRow status of this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.23.1.1.6 |
rcDiagMirrorByPortPidPid for a port.ro Integer32 .1.3.6.1.4.1.2272.1.23.1.1.8 |
rcDiagMirrorRemoteMirrorVlanIdvlan-id to which mirrored packets needs to
be send for remote mirroring. If set, this
vlan id is used in mirror tag of the remote
mirrored packetrw INTEGER .1.3.6.1.4.1.2272.1.23.1.1.9 |
rcDiagMirrorByPortMirroredPortListUsed to configure the 'mirrored' port. The port
where packets are copied from.rw PortSet .1.3.6.1.4.1.2272.1.23.1.1.12 |
rcDiagMirrorByPortMirroringPortListUsed to configure the 'mirroring' port. The port
where packets are copied from.rw PortSet .1.3.6.1.4.1.2272.1.23.1.1.13 |
rcDiagMirrorMirroringVlanIdDestination is a VLAN.rw Integer32 .1.3.6.1.4.1.2272.1.23.1.1.14 |
rcDiagMirrorMirroringMltIdDestination is an MLT.rw Integer32 .1.3.6.1.4.1.2272.1.23.1.1.15 |
rcDiagMirrorMirroringMgIdContains information about the MGID allocated.ro Integer32 .1.3.6.1.4.1.2272.1.23.1.1.16 |
rcDiagMirrorMirroringIpAddrDestination IP address.rw IpAddress .1.3.6.1.4.1.2272.1.23.1.1.17 |
rcDiagMirrorMirroringIpTtlTtl value for the mirrored packet when mirror
destination is IP. If other than default,
the encapsulated packet will have the given ttl.rw Integer32 .1.3.6.1.4.1.2272.1.23.1.1.18 |
rcDiagMirrorMirroringIpDscpDscp value for mirrored packets when mirror
destination is IP. If other than default,
the encapsulated packet will have the given
Dscp value.rw Integer32 .1.3.6.1.4.1.2272.1.23.1.1.19 |
rcDiagPortConvSteeringTableDiag Port Conv Steering Table SEQUENCE OF RcDiagPortConvSteeringEntry .1.3.6.1.4.1.2272.1.23.2 |
rcDiagPortConvSteeringEntryEntry containing information of Diag Port Conv Steering. RcDiagPortConvSteeringEntry .1.3.6.1.4.1.2272.1.23.2.1 |
rcDiagPortConvSteeringIdEntry id.ro Integer32 .1.3.6.1.4.1.2272.1.23.2.1.1 |
rcDiagPortConvSteeringPortOneIfIndex for port onerw Integer32 .1.3.6.1.4.1.2272.1.23.2.1.2 |
rcDiagPortConvSteeringPortTwoIfIndex for port tworw Integer32 .1.3.6.1.4.1.2272.1.23.2.1.3 |
rcDiagPortConvSteeringModeUsed to specify the traffic flow that should be
captured between ports one and two.rw Enumeration .1.3.6.1.4.1.2272.1.23.2.1.4 |
rcDiagPortConvSteeringForwardPortIfIndex of the port where captured traffic should
be forwarded to.rw Integer32 .1.3.6.1.4.1.2272.1.23.2.1.5 |
rcDiagPortConvSteeringEnableEnable this entry.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.23.2.1.6 |
rcDiagPortConvSteeringRowStatusUsed to create/delete entries in the rcDiagMirrorByPortTable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.23.2.1.7 |
rcDiagMacConvSteeringTableDiag Mac Conv Steering Table SEQUENCE OF RcDiagMacConvSteeringEntry .1.3.6.1.4.1.2272.1.23.3 |
rcDiagMacConvSteeringEntryEntry containing information of Diag Mac Conv Steering. RcDiagMacConvSteeringEntry .1.3.6.1.4.1.2272.1.23.3.1 |
rcDiagMacConvSteeringIdEntry id.ro Integer32 .1.3.6.1.4.1.2272.1.23.3.1.1 |
rcDiagMacConvSteeringSrcMacSource MAC addressrw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2272.1.23.3.1.2 |
rcDiagMacConvSteeringDstMacDestination MAC addressrw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2272.1.23.3.1.3 |
rcDiagMacConvSteeringInPortIfIndex of ingress port.rw Integer32 .1.3.6.1.4.1.2272.1.23.3.1.4 |
rcDiagMacConvSteeringForwardPortIfIndex of the port where captured traffic should
be forwarded to.rw Integer32 .1.3.6.1.4.1.2272.1.23.3.1.5 |
rcDiagMacConvSteeringEnableEnable this entry.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.23.3.1.6 |
rcDiagMacConvSteeringRowStatusUsed to create/delete entries in the rcDiagMirrorByPortTable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.23.3.1.7 |
rcDiagMirrorByPortTblSizeUsed to indicate table size.ro Integer32 .1.3.6.1.4.1.2272.1.23.11 |
rcDiagPortConvSteeringTblSizeUsed to indicate table size.ro Integer32 .1.3.6.1.4.1.2272.1.23.12 |
rcDiagMacConvSteeringTblSizeUsed to indicate table size.ro Integer32 .1.3.6.1.4.1.2272.1.23.13 |
rcDiagPcap OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.23.15 |
rcDiagPcapEnableTo enable pcap in secondary CPUrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.23.15.1 |
rcDiagPcapBufferWrapTo enable buffer wrap-around when buffer is full.
If set, pcap will continue to capture pkts, otherwise
stops pkt storingrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.23.15.2 |
rcDiagPcapPcmciaWrapTo wrap around the PCMCIA when saving data in PCMCIA.
In Vsp,the name has been changed to wrap-auto-save-file.
When this parameter is true it overwrites the file present on extflash/network during autosave.
If this parameter is set to false the file present is not overwritten.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.23.15.3 |
rcDiagPcapFrameSizeNumber of bytes of pkts needs to be storedrw INTEGER .1.3.6.1.4.1.2272.1.23.15.4 |
rcDiagPcapBufferSizememory to be allocated for capturing the pktrw INTEGER .1.3.6.1.4.1.2272.1.23.15.5 |
rcDiagPcapAutoSaveTo save data automatically when buffer is fullrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.23.15.6 |
rcDiagPcapAutoSaveFileNameName of the file in which the pkt is to be storedrw DisplayString .1.3.6.1.4.1.2272.1.23.15.7 |
rcDiagPcapAutoSaveDeviceWhere to store the captured pkts. If the option is
network, the user need to enter an IP address alsorw Enumeration .1.3.6.1.4.1.2272.1.23.15.8 |
rcDiagPcapAutoSaveNetworkIpAddressip address of the remote host where the data
needs to be stored. This field is valid only
if the device is networkrw IpAddress .1.3.6.1.4.1.2272.1.23.15.9 |
rcDiagPcapFilterTableSizeUsed to indicate the number of entries in the
Filter tablero Integer32 .1.3.6.1.4.1.2272.1.23.15.10 |
rcDiagPcapFilterTableA table used to store pcap secondary filters SEQUENCE OF RcDiagPcapFilterEntry .1.3.6.1.4.1.2272.1.23.15.11 |
rcDiagPcapFilterEntryPcap secondary filter desc RcDiagPcapFilterEntry .1.3.6.1.4.1.2272.1.23.15.11.1 |
rcDiagPcapFilterIdUnique ID that represents the filterro INTEGER .1.3.6.1.4.1.2272.1.23.15.11.1.1 |
rcDiagPcapFilterEnableFilter is enabled or notrw EnableValue .1.3.6.1.4.1.2272.1.23.15.11.1.2 |
rcDiagPcapFilterActionAction to be takesn when policy is matchedrw Enumeration .1.3.6.1.4.1.2272.1.23.15.11.1.3 |
rcDiagPcapFilterSrcMacSoruce mac address to matchrw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2272.1.23.15.11.1.4 |
rcDiagPcapFilterSrcMaskSoruce mac address mask. Used to specify a rangerw INTEGER .1.3.6.1.4.1.2272.1.23.15.11.1.5 |
rcDiagPcapFilterIsInverseSrcMacSoruce mac address Inverse. when set the mac
addresses otherthan specified is matchedrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.23.15.11.1.6 |
rcDiagPcapFilterDstMacDestination mac addressrw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2272.1.23.15.11.1.7 |
rcDiagPcapFilterDstMaskDestination mac address mask. Used to specify a rangerw INTEGER .1.3.6.1.4.1.2272.1.23.15.11.1.8 |
rcDiagPcapFilterIsInverseDstMacDestination mac address Inverse. when set the mac
addresses otherthan specified is matchedrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.23.15.11.1.9 |
rcDiagPcapFilterVlanIdVlan-id of the packet to be matchedrw INTEGER .1.3.6.1.4.1.2272.1.23.15.11.1.10 |
rcDiagPcapFilterToVlanIdTo Vlan-id. Used to specify a rangerw INTEGER .1.3.6.1.4.1.2272.1.23.15.11.1.11 |
rcDiagPcapFilterIsInverseVlanIdVlan-Id Inverse. when set the Vlan-Id
otherthan specified range is matchedrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.23.15.11.1.12 |
rcDiagPcapFilterPbitpBit of the packet to be matchedrw INTEGER .1.3.6.1.4.1.2272.1.23.15.11.1.13 |
rcDiagPcapFilterToPbitTo pBit. Used to specify a rangerw INTEGER .1.3.6.1.4.1.2272.1.23.15.11.1.14 |
rcDiagPcapFilterIsInversePbitpBit Inverse. when set the pBit
otherthan specified range is matchedrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.23.15.11.1.15 |
rcDiagPcapFilterEtherTypeEtherType of the packet to be matchedrw INTEGER .1.3.6.1.4.1.2272.1.23.15.11.1.16 |
rcDiagPcapFilterToEtherTypeTo EtherType. Used to specify a rangerw INTEGER .1.3.6.1.4.1.2272.1.23.15.11.1.17 |
rcDiagPcapFilterIsInverseEtherTypeEtherType Inverse. when set the EtherType
otherthan specified range is matchedrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.23.15.11.1.18 |
rcDiagPcapFilterProtocolTypeProtocolType of the packet to be matchedrw INTEGER .1.3.6.1.4.1.2272.1.23.15.11.1.19 |
rcDiagPcapFilterToProtocolTypeTo ProtocolType. Used to specify a rangerw INTEGER .1.3.6.1.4.1.2272.1.23.15.11.1.20 |
rcDiagPcapFilterIsInverseProtocolTypeProtocolType Inverse. when set the ProtocolType
otherthan specified range is matchedrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.23.15.11.1.21 |
rcDiagPcapFilterSrcIpSource IP address of the packet to be matchedrw IpAddress .1.3.6.1.4.1.2272.1.23.15.11.1.22 |
rcDiagPcapFilterToSrcIpTo Source IP address. Used to specify a rangerw IpAddress .1.3.6.1.4.1.2272.1.23.15.11.1.23 |
rcDiagPcapFilterIsInverseSrcIpSource IP address Inverse. when set the source IP
otherthan specified range is matchedrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.23.15.11.1.24 |
rcDiagPcapFilterDstIpDestination IP address of the packet to be matchedrw IpAddress .1.3.6.1.4.1.2272.1.23.15.11.1.25 |
rcDiagPcapFilterToDstIpTo Destination IP address. Used to specify a rangerw IpAddress .1.3.6.1.4.1.2272.1.23.15.11.1.26 |
rcDiagPcapFilterIsInverseDstIpDestination IP address Inverse. when set the
Destination IP otherthan specified is range
matchedrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.23.15.11.1.27 |
rcDiagPcapFilterDscpDSCP value of the packet to be matchedrw INTEGER .1.3.6.1.4.1.2272.1.23.15.11.1.28 |
rcDiagPcapFilterToDscpTo DSCP. Used to specify a rangerw INTEGER .1.3.6.1.4.1.2272.1.23.15.11.1.29 |
rcDiagPcapFilterIsInverseDscpDSCP Inverse. when set the DSCP
otherthan specified range is matchedrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.23.15.11.1.30 |
rcDiagPcapFilterRowStatusRow Statusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.23.15.11.1.31 |
rcDiagPcapFilterDscpMatchZeroWhen this value is set to true, then 0 value of
Pbit is not taken as disable value. The user will
be allowed to capture packets with Pbit value of
0 also. Be default it would be set to FALSErw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.23.15.11.1.32 |
rcDiagPcapFilterPbitMatchZeroWhen this value is set to true, then 0 value of
Pbit is not taken as disable value. The user will
be allowed to capture packets with Pbit value of
0 also. Be default it would be set to FALSErw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.23.15.11.1.33 |
rcDiagPcapAdvancedFilterTableSizeUsed to indicate the number of entries in the
Filter table advanced parameterro Integer32 .1.3.6.1.4.1.2272.1.23.15.12 |
rcDiagPcapAdvancedFilterTableA table used to store pcap secondary filters SEQUENCE OF RcDiagPcapAdvancedFilterEntry .1.3.6.1.4.1.2272.1.23.15.13 |
rcDiagPcapAdvancedFilterEntryPcap secondary Advanced filter desc RcDiagPcapAdvancedFilterEntry .1.3.6.1.4.1.2272.1.23.15.13.1 |
rcDiagPcapAdvancedFilterIdUnique ID that represents the filterro INTEGER .1.3.6.1.4.1.2272.1.23.15.13.1.1 |
rcDiagPcapAdvancedFilterUdpPortUdpPort of the packet to be matchedrw INTEGER .1.3.6.1.4.1.2272.1.23.15.13.1.2 |
rcDiagPcapAdvancedFilterToUdpPortTo UdpPort. Used to specify a rangerw INTEGER .1.3.6.1.4.1.2272.1.23.15.13.1.3 |
rcDiagPcapAdvancedFilterIsInverseUdpPortUdpPort Inverse. when set the UdpPort
otherthan specified range is matchedrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.23.15.13.1.4 |
rcDiagPcapAdvancedFilterTcpPortTcpPort of the packet to be matchedrw INTEGER .1.3.6.1.4.1.2272.1.23.15.13.1.5 |
rcDiagPcapAdvancedFilterToTcpPortTo TcpPort. Used to specify a rangerw INTEGER .1.3.6.1.4.1.2272.1.23.15.13.1.6 |
rcDiagPcapAdvancedFilterIsInverseTcpPortTcpPort Inverse. when set the TcpPort
otherthan specified range is matchedrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.23.15.13.1.7 |
rcDiagPcapAdvancedFilterUserDefinedDataUser defined data to match with the packets receivedrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2272.1.23.15.13.1.8 |
rcDiagPcapAdvancedFilterUserDefinedDataSizeLength of user defined datarw INTEGER .1.3.6.1.4.1.2272.1.23.15.13.1.9 |
rcDiagPcapAdvancedFilterUserDefinedOffsetOffset from which match has to startrw INTEGER .1.3.6.1.4.1.2272.1.23.15.13.1.10 |
rcDiagPcapAdvancedFilterIsInverseUserDefinedTcpPort Inverse. when set the Userdata
otherthan specified is matchedrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.23.15.13.1.11 |
rcDiagPcapAdvancedFilterTimerTimer to start the pcap capture window in msrw INTEGER .1.3.6.1.4.1.2272.1.23.15.13.1.12 |
rcDiagPcapAdvancedFilterPacketCountNumber of packets to be captured before disabling pcaprw INTEGER .1.3.6.1.4.1.2272.1.23.15.13.1.13 |
rcDiagPcapAdvancedFilterRefreshTimerRefresh timer in msrw INTEGER .1.3.6.1.4.1.2272.1.23.15.13.1.14 |
rcDiagPcapAdvancedFilterRowStatusRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.23.15.13.1.15 |
rcDiagPcapCopyFileNameUsed to indicate the file name. When set, the PCAP
data from PCAP engine RAM is stored into this file
in PCAP enginerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2272.1.23.15.14 |
rcDiagPcapResetStatTo Reset PCAP statisticsrw Enumeration .1.3.6.1.4.1.2272.1.23.15.15 |
rcDiagPcapStatPacketCapacityCountPacket Capacity Countro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2272.1.23.15.16 |
rcDiagPcapStatNumberOfPacketsReceivedNumber of packets received in PCAP enginero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2272.1.23.15.17 |
rcDiagPcapStatNumberOfPacketsAccumulatedNumber of packets captured in PCAP enginero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2272.1.23.15.18 |
rcDiagPcapStatNumberOfPacketsDroppedInPcapEngineNumber of packets dropped in PCAP engine by filtersro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2272.1.23.15.19 |
rcDiagPcapStatNumberOfPacketsDroppedInHardwareNumber of packets dropped in Hardwarero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2272.1.23.15.20 |
rcDiagPcapDataValidA true/false value that indicate the return
data whether is valid.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.23.15.21 |
rcDiagPcapEtherTypeForSvlanLevelEtherType of svlan level.rw INTEGER ('5dd'h..'ffff'h) .1.3.6.1.4.1.2272.1.23.15.22 |
rcIpx OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.24 |
rcPos OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.26 |
rcPosPppIpxTable SEQUENCE OF RcPosPppIpxEntry .1.3.6.1.4.1.2272.1.26.1 |
rcPosPppIpxEntry RcPosPppIpxEntry .1.3.6.1.4.1.2272.1.26.1.1 |
rcPosPppIpxIfIndexport number.ro InterfaceIndex .1.3.6.1.4.1.2272.1.26.1.1.1 |
rcPosPppIpxIpxcpAdminStatusrw Enumeration .1.3.6.1.4.1.2272.1.26.1.1.2 |
rcPosPppIpxOperStatusro Enumeration .1.3.6.1.4.1.2272.1.26.1.1.3 |
rcPosPppIpxNetAddrIPX Network address.rw OCTET STRING .1.3.6.1.4.1.2272.1.26.1.1.4 |
rcPosPppIpxRoutingProtocolrw Enumeration .1.3.6.1.4.1.2272.1.26.1.1.5 |
rcPosSonetTable SEQUENCE OF RcPosSonetEntry .1.3.6.1.4.1.2272.1.26.2 |
rcPosSonetEntry RcPosSonetEntry .1.3.6.1.4.1.2272.1.26.2.1 |
rcPosSonetIndexpos ifIndex.ro InterfaceIndex .1.3.6.1.4.1.2272.1.26.2.1.1 |
rcPosSonetFramingrw Enumeration .1.3.6.1.4.1.2272.1.26.2.1.2 |
rcPosSonetSectionTraceconfig. J0 byterw INTEGER .1.3.6.1.4.1.2272.1.26.2.1.3 |
rcPosSonetSectionGrowthconfig. Z0 byterw INTEGER .1.3.6.1.4.1.2272.1.26.2.1.4 |
rcPosSonetSyncronizationconfig. S1 byterw INTEGER .1.3.6.1.4.1.2272.1.26.2.1.5 |
rcPosSonetStsPathTraceconfig. 64/16 byte.rw OCTET STRING .1.3.6.1.4.1.2272.1.26.2.1.6 |
rcPosSonetPathSignalLabelconfig. C2 byterw INTEGER .1.3.6.1.4.1.2272.1.26.2.1.7 |
rcPosSonetClockSourcerw Enumeration .1.3.6.1.4.1.2272.1.26.2.1.8 |
rcPosSonetScramblerw EnableValue .1.3.6.1.4.1.2272.1.26.2.1.9 |
rcPosSonetOperStatusFramingro Integer32 .1.3.6.1.4.1.2272.1.26.2.1.10 |
rcPosSonetOperStatusClockSourcero Integer32 .1.3.6.1.4.1.2272.1.26.2.1.11 |
rcPosSonetOperStatusScramblero EnableValue .1.3.6.1.4.1.2272.1.26.2.1.12 |
rcPosSonetOperStatusSectionTracero Integer32 .1.3.6.1.4.1.2272.1.26.2.1.13 |
rcPosSonetOperStatusPathSignalLabelro Integer32 .1.3.6.1.4.1.2272.1.26.2.1.14 |
rcPosLineStatusTablePos Line Status Table SEQUENCE OF RcPosLineStatusEntry .1.3.6.1.4.1.2272.1.26.3 |
rcPosLineStatusEntryEntry containing information of Pos Line Status. RcPosLineStatusEntry .1.3.6.1.4.1.2272.1.26.3.1 |
rcPosLineStatusIndexpos ifIndex, same as rcPosPppIpxIfIndex.ro InterfaceIndex .1.3.6.1.4.1.2272.1.26.3.1.1 |
rcPosLineStatusLocalMACAddresscurrent local MAC addressro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2272.1.26.3.1.2 |
rcPosLineStatusRemoteMACAddresscurrent remote MAC addressro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2272.1.26.3.1.3 |
rcPosLineStatusLocalIpAddrcurrent local ip addrro IpAddress .1.3.6.1.4.1.2272.1.26.3.1.4 |
rcPosLineStatusRemoteIpAddrcurrent remote ip addrro IpAddress .1.3.6.1.4.1.2272.1.26.3.1.5 |
rcPosLineStatusOutQualitycurrent output quality.ro Integer32 .1.3.6.1.4.1.2272.1.26.3.1.6 |
rcPosLineStatusLocalPeriodro Integer32 .1.3.6.1.4.1.2272.1.26.3.1.7 |
rcPosLineStatusDeviceTypero Integer32 .1.3.6.1.4.1.2272.1.26.3.1.8 |
rcPosLineStatusDeviceRevro Integer32 .1.3.6.1.4.1.2272.1.26.3.1.9 |
rcPosLineStatusIpxRoutingProtocolro Integer32 .1.3.6.1.4.1.2272.1.26.3.1.10 |
rcPosLineConfigTablePos Line Config Table SEQUENCE OF RcPosLineConfigEntry .1.3.6.1.4.1.2272.1.26.4 |
rcPosLineConfigEntryEntry containing information of Pos Line Config. RcPosLineConfigEntry .1.3.6.1.4.1.2272.1.26.4.1 |
rcPosLineConfigIndexpos ifIndex, same as rcPosPppIpxIfIndex.ro InterfaceIndex .1.3.6.1.4.1.2272.1.26.4.1.1 |
rcPosLineConfigLocalMACAddresscurrent local MAC addressrw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2272.1.26.4.1.2 |
rcPosLineConfigRemoteMACAddresscurrent remote MAC addressrw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2272.1.26.4.1.3 |
rcPosLineConfigLocalIpAddrcurrent local ip addrrw IpAddress .1.3.6.1.4.1.2272.1.26.4.1.4 |
rcPosLineConfigRemoteIpAddrcurrent remote ip addrrw IpAddress .1.3.6.1.4.1.2272.1.26.4.1.5 |
rcPosLineConfigRemoteReportPeriodconfig. remote report period.rw INTEGER .1.3.6.1.4.1.2272.1.26.4.1.6 |
rcPosLineConfigLqrThresholdconfig. input quality.rw INTEGER .1.3.6.1.4.1.2272.1.26.4.1.7 |
rcPosLineConfigOutQualityconfig. output quality.rw Integer32 .1.3.6.1.4.1.2272.1.26.4.1.8 |
rcPosLineConfigPppStpSTP PPP encoding enable T/Frw EnableValue .1.3.6.1.4.1.2272.1.26.4.1.9 |
rcPosLineConfigLoopBackperform loop-back.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.26.4.1.10 |
rcPosLineConfigIpxVlanMacAddressrw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2272.1.26.4.1.11 |
rcPosLineConfigIpxRemoteMacAddressrw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2272.1.26.4.1.12 |
rcPosSonetTrap OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.26.5 |
rcPosSonetTrapTypeUsed to indicate a particular type of Sonet
trap.ro Enumeration .1.3.6.1.4.1.2272.1.26.5.1 |
rcPosSonetTrapIndicationUsed to indicate an indication for a Sonet trap.ro Enumeration .1.3.6.1.4.1.2272.1.26.5.2 |
rcPosSioCardConfigTablePos Sio Card Config Table SEQUENCE OF RcPosSioCardConfigEntry .1.3.6.1.4.1.2272.1.26.6 |
rcPosSioCardConfigEntryEntry containing information of Pos Sio Card Config. RcPosSioCardConfigEntry .1.3.6.1.4.1.2272.1.26.6.1 |
rcPosSioCardConfigSlotIndexslot Index.ro Integer32 .1.3.6.1.4.1.2272.1.26.6.1.1 |
rcPosSioCardConfigActionrw Enumeration .1.3.6.1.4.1.2272.1.26.6.1.2 |
rcPosSioCardConfigTraceModerw Enumeration .1.3.6.1.4.1.2272.1.26.6.1.3 |
rcPosSioCardConfigImageFileNamePOS Image file name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2272.1.26.6.1.4 |
rcPosOperStatusTable SEQUENCE OF RcPosOperStatusEntry .1.3.6.1.4.1.2272.1.26.7 |
rcPosOperStatusEntry RcPosOperStatusEntry .1.3.6.1.4.1.2272.1.26.7.1 |
rcPosOperStatusIndexpos ifIndex.ro InterfaceIndex .1.3.6.1.4.1.2272.1.26.7.1.1 |
rcPosOperStatusLqrStatusOperational status of pppLqrConfigStatus.ro Integer32 .1.3.6.1.4.1.2272.1.26.7.1.2 |
rcPosOperStatusLineLqrThreshold.ro Integer32 .1.3.6.1.4.1.2272.1.26.7.1.3 |
rcPosOperStatusLinkMagicNumber.ro Integer32 .1.3.6.1.4.1.2272.1.26.7.1.4 |
rcPosOperStatusLinePppStpro EnableValue .1.3.6.1.4.1.2272.1.26.7.1.5 |
rcLinkFlapDetect OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.27 |
rcLinkFlapDetectAutoPortDownEnableUsed to enable/disable the Link Flap Detect
feature. When enabled this feature will monitor
the number of times a port goes down during a
certain interval. If the number exceeds a given
bound the port will be forced out-of-service.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.27.1 |
rcLinkFlapDetectSendTrapUsed to configure whether a trap should be
sent if the port is forced out-of-service.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.27.2 |
rcLinkFlapDetectFrequencyUsed to configure the number of times the port
can go down.rw INTEGER .1.3.6.1.4.1.2272.1.27.3 |
rcLinkFlapDetectIntervalUsed to configure the interval (in minutes).rw INTEGER .1.3.6.1.4.1.2272.1.27.4 |
rcV1Traps OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.28 |
rcRadius OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.29 |
rcRadiusGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.29.1 |
rcRadiusGlobalEnableEnable/disable this feature.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.29.1.1 |
rcRadiusGlobalMaxNumberServerMaximum number of RADIUS servers.rw INTEGER .1.3.6.1.4.1.2272.1.29.1.2 |
rcRadiusGlobalAttributeValueInteger value for Access-Priority attribute.rw INTEGER .1.3.6.1.4.1.2272.1.29.1.3 |
rcRadiusGlobalServerTableSizeUsed to indicate the number of entries in the
rcRadiusServerTable.ro Integer32 .1.3.6.1.4.1.2272.1.29.1.4 |
rcRadiusGlobalAcctEnableEnable/disable Radius Accounting feature.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.29.1.5 |
rcRadiusGlobalAcctAttributeValueInteger value for User-Command attribute.rw INTEGER .1.3.6.1.4.1.2272.1.29.1.6 |
rcRadiusGlobalAcctIncludeCliInclude/Exclude cli-commands in radius
acccounting updates.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.29.1.7 |
rcRadiusGlobalClearStatClear Radius Statistic for all servers
configured.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.29.1.8 |
rcRadiusGlobalMcastAttributeValueInteger value for multicast address vendor
specific attribute.rw INTEGER .1.3.6.1.4.1.2272.1.29.1.9 |
rcRadiusGlobalAuthInfoAttributeValueInteger value for Auth-Info vendor specific attribute.rw INTEGER .1.3.6.1.4.1.2272.1.29.1.10 |
rcRadiusGlobalCommandAccessInteger value for Command-Access attribute.rw INTEGER .1.3.6.1.4.1.2272.1.29.1.11 |
rcRadiusGlobalCliCommandsInteger value for Cli-Command attribute.rw INTEGER .1.3.6.1.4.1.2272.1.29.1.12 |
rcRadiusGlobalIgapLogFSizeMaximum size for the IGAP accounting time-out
log file in KB.rw INTEGER .1.3.6.1.4.1.2272.1.29.1.13 |
rcRadiusGlobalCliProfEnableEnable/disable Radius CLI Profiling.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.29.1.14 |
rcRadiusGlobalAuthInvalidServerAddressNumber of Access Responses from unknown or
invalid Radius servers.ro Counter32 .1.3.6.1.4.1.2272.1.29.1.15 |
rcRadiusGlobalSourceIpFlagFlag to include configured IP address as source
address in RADIUS packets.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.29.1.16 |
rcRadiusGlobalCliCmdCountInteger value for Cli-Command-count.rw INTEGER .1.3.6.1.4.1.2272.1.29.1.18 |
rcRadiusServTableThe RADIUS table (0 to 10 entries). This
table lists the information of the RADIUS server.deprecated SEQUENCE OF RcRadiusServEntry .1.3.6.1.4.1.2272.1.29.3 |
rcRadiusServEntryA RADIUS server table entry.deprecated RcRadiusServEntry .1.3.6.1.4.1.2272.1.29.3.1 |
rcRadiusServPriorityServer priority, used to control which server to choose
first to send authentication.rwdeprecated INTEGER .1.3.6.1.4.1.2272.1.29.3.1.1 |
rcRadiusServAddressServer IP address of the RADIUS authentication server
referred to in this table entry.rwdeprecated IpAddress .1.3.6.1.4.1.2272.1.29.3.1.2 |
rcRadiusServTimeOutThe time interval in seconds before the client
retransmit the packet.rwdeprecated INTEGER .1.3.6.1.4.1.2272.1.29.3.1.3 |
rcRadiusServEnableEnable or disable this server.rwdeprecated TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.29.3.1.4 |
rcRadiusServMaxRetriesMaximum number of retransmissions.rwdeprecated INTEGER .1.3.6.1.4.1.2272.1.29.3.1.5 |
rcRadiusServUdpPortThe UDP port the client is using to send requests
to this server.rwdeprecated INTEGER .1.3.6.1.4.1.2272.1.29.3.1.6 |
rcRadiusServSecretKeyThe identifier of the RADIUS authentication client.rwdeprecated DisplayString .1.3.6.1.4.1.2272.1.29.3.1.7 |
rcRadiusServAccessRequestsThe number of RADIUS access-response packets sent to
this server. This does not include retransmissions.rodeprecated Counter32 .1.3.6.1.4.1.2272.1.29.3.1.8 |
rcRadiusServAccessAcceptsThe number of RADIUS access-accept packets (valid or
invalid) received from this server.rodeprecated Counter32 .1.3.6.1.4.1.2272.1.29.3.1.9 |
rcRadiusServAccessRejectsThe number of RADIUS access-reject packets (valid or
invalid) received from this server.rodeprecated Counter32 .1.3.6.1.4.1.2272.1.29.3.1.10 |
rcRadiusServBadResponsesThe number of RADIUS invalid access-response packets
received from this server.rodeprecated Counter32 .1.3.6.1.4.1.2272.1.29.3.1.11 |
rcRadiusServPendingRequestsThe number of RADIUS access-request packets destined
for this server that have not yet timed out or
received a response. This variable is incremented
when an access-request is sent and decremented due
to receipt of an access-accept, access-reject, a
timeout or retransmission.rodeprecated Counter32 .1.3.6.1.4.1.2272.1.29.3.1.12 |
rcRadiusServClientRetriesThe number of authentication retransmission to
this server.rodeprecated Counter32 .1.3.6.1.4.1.2272.1.29.3.1.13 |
rcRadiusServRowStatusUsed to create/delete entries.rwdeprecated RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.29.3.1.14 |
rcRadiusServAcctEnableEnable or disable Radius Accounting on this server.rwdeprecated TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.29.3.1.15 |
rcRadiusServAcctUdpPortThe UDP port the client used to send accounting
requests to this server.rwdeprecated INTEGER .1.3.6.1.4.1.2272.1.29.3.1.16 |
rcRadiusServAcctOnRequestsThe number of RADIUS accounting-on packets sent to
this server. This does not include retransmissions.rodeprecated Counter32 .1.3.6.1.4.1.2272.1.29.3.1.17 |
rcRadiusServAcctOffRequestsThe number of RADIUS accounting-off packets sent to
this server. This does not include retransmissions.rodeprecated Counter32 .1.3.6.1.4.1.2272.1.29.3.1.18 |
rcRadiusServAcctStartRequestsThe number of RADIUS accounting-start packets sent to
this server. This does not include retransmissions.rodeprecated Counter32 .1.3.6.1.4.1.2272.1.29.3.1.19 |
rcRadiusServAcctStopRequestsThe number of RADIUS accounting-stop packets sent to
this server. This does not include retransmissions.rodeprecated Counter32 .1.3.6.1.4.1.2272.1.29.3.1.20 |
rcRadiusServAcctInterimRequestsThe number of RADIUS accounting-interim packets sent to
this server. This does not include retransmissions.rodeprecated Counter32 .1.3.6.1.4.1.2272.1.29.3.1.21 |
rcRadiusServAcctBadResponsesThe number of Invalid responses received from this
server.rodeprecated Counter32 .1.3.6.1.4.1.2272.1.29.3.1.22 |
rcRadiusServAcctPendingRequestsThe number of RADIUS accounting packets that are waiting
be sent to this server. This variable is incremented
whenever any accounting-request is sent to this server and
decremented when an acknowledgement is received or timeout
occurs.rodeprecated Counter32 .1.3.6.1.4.1.2272.1.29.3.1.23 |
rcRadiusServAcctClientRetriesThe number of RADIUS accounting packets retransmitted
to this server.rodeprecated Counter32 .1.3.6.1.4.1.2272.1.29.3.1.24 |
rcRadiusServUsedBycli(1): for cli login, igap(2): for igap,snmp(3):
for snmp login, eap(4) for EAP PAE Authenticator
web(5) for web-server(http/https) login.rodeprecated Enumeration .1.3.6.1.4.1.2272.1.29.3.1.25 |
rcRadiusServNasIpAddressRADIUS Client NAS Identifier for this server.rodeprecated IpAddress .1.3.6.1.4.1.2272.1.29.3.1.26 |
rcRadiusServRoundTripTimeTime different between the instance when
a RADIUS request is sent and the
corresponding response is received.rodeprecated DisplayString .1.3.6.1.4.1.2272.1.29.3.1.27 |
rcRadiusServAccessChallangesThe number of RADIUS access-challanges packets
sent to this server. This does not include
retransmission.rodeprecated Counter32 .1.3.6.1.4.1.2272.1.29.3.1.28 |
rcRadiusServSourceIpAddrsource IP address RADIUS packets.rwdeprecated IpAddress .1.3.6.1.4.1.2272.1.29.3.1.29 |
rcRadiusGlobalSnmp OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.29.4 |
rcRadiusGlobalSnmpEnableEnable/disable snmp radius authentication.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.29.4.1 |
rcRadiusGlobalSnmpAcctEnableEnable/disable Radius Accounting for SNMP.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.29.4.2 |
rcRadiusGlobalSnmpReAuthenticateTimerInteger value representing Re-Authenticate
Timer in seconds. Timer to be used to Re-
Authenticate a SNMP Session.rw INTEGER .1.3.6.1.4.1.2272.1.29.4.3 |
rcRadiusGlobalSnmpAbortSessionTimerInteger value representing the time in seconds
after which the snmp session is considered
expired and Radius Accounting Stop message
is sent.rw INTEGER .1.3.6.1.4.1.2272.1.29.4.4 |
rcRadiusGlobalSnmpUserNameUser name for Radius SNMP Accounting.rw DisplayString .1.3.6.1.4.1.2272.1.29.4.5 |
rcRadiusEapLastRejMacUsed to store the Last Rejected MAC
address on an EAP enabled port.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2272.1.29.4.6 |
rcRadiusPaePortNumberUsed to store the Port Number on which
the Mac Intrusion happened.ro InterfaceIndex .1.3.6.1.4.1.2272.1.29.4.7 |
rcRadiusEapLastAuthMacUsed to store the Last Authenticated MAC
address on an EAP enabled port.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2272.1.29.4.8 |
rcRadiusServHostTableThe RADIUS Server Host table (0 to 10 entries). This
table lists the information of the RADIUS server. SEQUENCE OF RcRadiusServHostEntry .1.3.6.1.4.1.2272.1.29.5 |
rcRadiusServHostEntryA RADIUS server table entry. RcRadiusServHostEntry .1.3.6.1.4.1.2272.1.29.5.1 |
rcRadiusServHostAddressTypeInet Address Type of radius server host address. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2272.1.29.5.1.1 |
rcRadiusServHostAddressServer IP address of the RADIUS authentication server
referred to in this table entry. InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2272.1.29.5.1.2 |
rcRadiusServHostUsedBycli(1): for cli login, igap(2): for igap,snmp(3):
for snmp login, eap(4) for EAP PAE Authenticator
web(5) for web-server(http/https) login.
IGAP is not supported on the VSP 9000. Enumeration .1.3.6.1.4.1.2272.1.29.5.1.3 |
rcRadiusServHostPriorityServer priority, used to control which server to choose
first to send authentication.rw Integer32 .1.3.6.1.4.1.2272.1.29.5.1.4 |
rcRadiusServHostTimeOutThe time interval in seconds before the client
retransmit the packet.rw Integer32 .1.3.6.1.4.1.2272.1.29.5.1.5 |
rcRadiusServHostEnableEnable or disable this server.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.29.5.1.6 |
rcRadiusServHostMaxRetriesMaximum number of retransmissions.rw Integer32 .1.3.6.1.4.1.2272.1.29.5.1.7 |
rcRadiusServHostUdpPortThe UDP port the client is using to send requests
to this server.rw Integer32 .1.3.6.1.4.1.2272.1.29.5.1.8 |
rcRadiusServHostSecretKeyThe identifier of the RADIUS authentication client.rw DisplayString .1.3.6.1.4.1.2272.1.29.5.1.9 |
rcRadiusServHostAccessRequestsThe number of RADIUS access-response packets sent to
this server. This does not include retransmissions.ro Counter32 .1.3.6.1.4.1.2272.1.29.5.1.10 |
rcRadiusServHostAccessAcceptsThe number of RADIUS access-accept packets (valid or
invalid) received from this server.ro Counter32 .1.3.6.1.4.1.2272.1.29.5.1.11 |
rcRadiusServHostAccessRejectsThe number of RADIUS access-reject packets (valid or
invalid) received from this server.ro Counter32 .1.3.6.1.4.1.2272.1.29.5.1.12 |
rcRadiusServHostBadResponsesThe number of RADIUS invalid access-response packets
received from this server.ro Counter32 .1.3.6.1.4.1.2272.1.29.5.1.13 |
rcRadiusServHostPendingRequestsThe number of RADIUS access-request packets destined
for this server that have not yet timed out or
received a response. This variable is incremented
when an access-request is sent and decremented due
to receipt of an access-accept, access-reject, a
timeout or retransmission.ro Counter32 .1.3.6.1.4.1.2272.1.29.5.1.14 |
rcRadiusServHostClientRetriesThe number of authentication retransmission to
this server.ro Counter32 .1.3.6.1.4.1.2272.1.29.5.1.15 |
rcRadiusServHostRowStatusUsed to create/delete entries.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.29.5.1.16 |
rcRadiusServHostAcctEnableEnable or disable Radius Accounting on this server.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.29.5.1.17 |
rcRadiusServHostAcctUdpPortThe UDP port the client used to send accounting
requests to this server.rw Integer32 .1.3.6.1.4.1.2272.1.29.5.1.18 |
rcRadiusServHostAcctOnRequestsThe number of RADIUS accounting-on packets sent to
this server. This does not include retransmissions.ro Counter32 .1.3.6.1.4.1.2272.1.29.5.1.19 |
rcRadiusServHostAcctOffRequestsThe number of RADIUS accounting-off packets sent to
this server. This does not include retransmissions.ro Counter32 .1.3.6.1.4.1.2272.1.29.5.1.20 |
rcRadiusServHostAcctStartRequestsThe number of RADIUS accounting-start packets sent to
this server. This does not include retransmissions.ro Counter32 .1.3.6.1.4.1.2272.1.29.5.1.21 |
rcRadiusServHostAcctStopRequestsThe number of RADIUS accounting-stop packets sent to
this server. This does not include retransmissions.ro Counter32 .1.3.6.1.4.1.2272.1.29.5.1.22 |
rcRadiusServHostAcctInterimRequestsThe number of RADIUS accounting-interim packets sent to
this server. This does not include retransmissions.ro Counter32 .1.3.6.1.4.1.2272.1.29.5.1.23 |
rcRadiusServHostAcctBadResponsesThe number of Invalid responses received from this
server.ro Counter32 .1.3.6.1.4.1.2272.1.29.5.1.24 |
rcRadiusServHostAcctPendingRequestsThe number of RADIUS accounting packets that are waiting
be sent to this server. This variable is incremented
whenever any accounting-request is sent to this server and
decremented when an acknowledgement is received or timeout
occurs.ro Counter32 .1.3.6.1.4.1.2272.1.29.5.1.25 |
rcRadiusServHostAcctClientRetriesThe number of RADIUS accounting packets retransmitted
to this server.ro Counter32 .1.3.6.1.4.1.2272.1.29.5.1.26 |
rcRadiusServHostNasIpAddressRADIUS Client NAS Identifier for this server.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2272.1.29.5.1.27 |
rcRadiusServHostRoundTripTimeTime different between the instance when
a RADIUS request is sent and the
corresponding response is received.ro DisplayString .1.3.6.1.4.1.2272.1.29.5.1.28 |
rcRadiusServHostAccessChallangesThe number of RADIUS access-challanges packets
sent to this server. This does not include
retransmission.ro Counter32 .1.3.6.1.4.1.2272.1.29.5.1.29 |
rcRadiusServHostSourceIpAddrsource IP address RADIUS packets.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2272.1.29.5.1.30 |
rcIgmp OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.30 |
rcIgmpInterfaceExtnTable SEQUENCE OF RcIgmpInterfaceExtnEntry .1.3.6.1.4.1.2272.1.30.1 |
rcIgmpInterfaceExtnEntry RcIgmpInterfaceExtnEntry .1.3.6.1.4.1.2272.1.30.1.1 |
rcIgmpInterfaceExtnIfIndexifindex.ro InterfaceIndex .1.3.6.1.4.1.2272.1.30.1.1.1 |
rcIgmpInterfaceExtnSnoopEnableenable snoop.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.30.1.1.2 |
rcIgmpInterfaceExtnProxySnoopEnableenable proxy snoop.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.30.1.1.3 |
rcIgmpInterfaceExtnMaxAdvertiseIntervalrw INTEGER .1.3.6.1.4.1.2272.1.30.1.1.4 |
rcIgmpInterfaceExtnMinAdvertiseIntervalrw INTEGER .1.3.6.1.4.1.2272.1.30.1.1.5 |
rcIgmpInterfaceExtnMaxInitialAdvertiseIntervalrw Integer32 .1.3.6.1.4.1.2272.1.30.1.1.6 |
rcIgmpInterfaceExtnMaxInitialAdvertmentsrw Integer32 .1.3.6.1.4.1.2272.1.30.1.1.7 |
rcIgmpInterfaceExtnNeighborDeadIntervalrw Integer32 .1.3.6.1.4.1.2272.1.30.1.1.8 |
rcIgmpInterfaceExtnFastLeaveEnableEnable fast leave on this interface.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.30.1.1.9 |
rcIgmpInterfaceExtnFastLeavePortMembersThe set of ports that are enabled for fast leave.rw PortSet .1.3.6.1.4.1.2272.1.30.1.1.10 |
rcIgmpInterfaceExtnMrdiscEnableEnable/disable multicast router discovery.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.30.1.1.11 |
rcIgmpInterfaceExtnDiscoveredRouterPortslist of ports that discovered by
IGMP Multicast router discovery
(MRDISC) protocol.ro PortSet .1.3.6.1.4.1.2272.1.30.1.1.12 |
rcIgmpInterfaceExtnSnoopMRouterPortsThe set of ports in this interface that provide
connectivity to an IP Multicast router.rw PortSet .1.3.6.1.4.1.2272.1.30.1.1.13 |
rcIgmpInterfaceExtnSnoopActiveMRouterPortsActive ports.ro PortSet .1.3.6.1.4.1.2272.1.30.1.1.14 |
rcIgmpInterfaceExtnSnoopMRouterExpirationMulticast querier router aging time out.ro Integer32 .1.3.6.1.4.1.2272.1.30.1.1.15 |
rcIgmpInterfaceExtnFlushActionIGMP flush action.rw Enumeration .1.3.6.1.4.1.2272.1.30.1.1.16 |
rcIgmpInterfaceExtnRouterAlertEnableEnable Router Alert Check.rw EnableValue .1.3.6.1.4.1.2272.1.30.1.1.17 |
rcIgmpInterfaceExtnSsmEnableenable SSM.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.30.1.1.18 |
rcIgmpInterfaceExtnAccntEnableenable/disable accounting.rw EnableValue .1.3.6.1.4.1.2272.1.30.1.1.20 |
rcIgmpInterfaceExtnAuthEnableenable/disable authentication.rw EnableValue .1.3.6.1.4.1.2272.1.30.1.1.21 |
rcIgmpInterfaceExtnStreamLimitEnableStream Limitation enable/disable.rw EnableValue .1.3.6.1.4.1.2272.1.30.1.1.22 |
rcIgmpInterfaceExtnMaxStreamsMaximum number of stream.rw Integer32 .1.3.6.1.4.1.2272.1.30.1.1.23 |
rcIgmpInterfaceExtnNumStreamsCurrent number of streams.ro Integer32 .1.3.6.1.4.1.2272.1.30.1.1.24 |
rcIgmpInterfaceExtnNewQuerierThe address of the New IGMP Querier on
the IP subnet to which this interface is
attached.ro IpAddress .1.3.6.1.4.1.2272.1.30.1.1.25 |
rcIgmpInterfaceExtnSnoopQuerierEnableenable snoop querier.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.30.1.1.26 |
rcIgmpInterfaceExtnSnoopQuerierAddrThe pseudo address of the IGMP Snoop Querier.rw IpAddress .1.3.6.1.4.1.2272.1.30.1.1.27 |
rcIgmpInterfaceExtnMvrEnableEnable or disable mcast-vlan-registration on a vlan, it
is used to specified a vlan works as a mcast-vlan,
maximum 16 mcast-vlan is supported.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.30.1.1.28 |
rcIgmpInterfaceExtnMvrProxyEnableenable or disable mcast-vlan-registration proxy on a vlan,
you must enable mcast-vlan-registration at first.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.30.1.1.29 |
rcIgmpInterfaceExtnDynamicDowngradeEnableenable dynamic downgrade the IGMP version when older version query message was received.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.30.1.1.30 |
rcIgmpInterfaceExtnCompatibilityModeEnableenable v2 v3 compatible mode, which will handle the IGMP v2 message in v3 interfacerw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.30.1.1.31 |
rcIgmpInterfaceExtnOperVersionThe operational version of IGMP which is running on this interface.ro Enumeration .1.3.6.1.4.1.2272.1.30.1.1.32 |
rcIgmpInterfaceExtnExplicitHostTrackingEnableEnable the IGMP protocol running in version 3 to track hosts per channels/groups.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.30.1.1.33 |
rcIgmpStaticTable SEQUENCE OF RcIgmpStaticEntry .1.3.6.1.4.1.2272.1.30.2 |
rcIgmpStaticEntry RcIgmpStaticEntry .1.3.6.1.4.1.2272.1.30.2.1 |
rcIgmpStaticIfIndexifindexro InterfaceIndex .1.3.6.1.4.1.2272.1.30.2.1.1 |
rcIgmpStaticGrpAddrIp multicast address. The GrpAddress holds the starting
range for the address range. If the ToGrpAddress is not
entered, the it is as good as entering a single address.ro IpAddress .1.3.6.1.4.1.2272.1.30.2.1.2 |
rcIgmpStaticMemberPortsegressing ports.rw PortSet .1.3.6.1.4.1.2272.1.30.2.1.3 |
rcIgmpStaticNotAllowedToJoinnot allowed to join.rw PortSet .1.3.6.1.4.1.2272.1.30.2.1.4 |
rcIgmpStaticRowStatusUsed to create/delete entries in the rcIgmpStaticEntry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.30.2.1.5 |
rcIgmpStaticToGrpAddrTo hold the range for the GrpAddress.rw IpAddress .1.3.6.1.4.1.2272.1.30.2.1.6 |
rcIgmpAccessTable SEQUENCE OF RcIgmpAccessEntry .1.3.6.1.4.1.2272.1.30.3 |
rcIgmpAccessEntry RcIgmpAccessEntry .1.3.6.1.4.1.2272.1.30.3.1 |
rcIgmpAccessIfIndexifindexro InterfaceIndex .1.3.6.1.4.1.2272.1.30.3.1.1 |
rcIgmpAccessGrpAddrip multicast addr.ro IpAddress .1.3.6.1.4.1.2272.1.30.3.1.2 |
rcIgmpAccessHostAddrhost addr.ro IpAddress .1.3.6.1.4.1.2272.1.30.3.1.3 |
rcIgmpAccessModedenyTX(1), denyRX(2), denyBOTH(3).rw Enumeration .1.3.6.1.4.1.2272.1.30.3.1.4 |
rcIgmpAccessRowStatusUsed to create/delete entries in the rcIgmpAccessEntry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.30.3.1.5 |
rcIgmpAccessHostMaskhost mask.ro IpAddress .1.3.6.1.4.1.2272.1.30.3.1.6 |
rcIgmpSenderTable SEQUENCE OF RcIgmpSenderEntry .1.3.6.1.4.1.2272.1.30.4 |
rcIgmpSenderEntry RcIgmpSenderEntry .1.3.6.1.4.1.2272.1.30.4.1 |
rcIgmpSenderGrpAddrip multicast addr.ro IpAddress .1.3.6.1.4.1.2272.1.30.4.1.1 |
rcIgmpSenderIfIndexifindexro InterfaceIndex .1.3.6.1.4.1.2272.1.30.4.1.2 |
rcIgmpSenderMemberAddrhost addr.ro IpAddress .1.3.6.1.4.1.2272.1.30.4.1.3 |
rcIgmpSenderActionnone(0), flushEntry(1), flushGrp(2).rw Enumeration .1.3.6.1.4.1.2272.1.30.4.1.4 |
rcIgmpSenderTPortIgmp Sender Tport.ro Integer32 .1.3.6.1.4.1.2272.1.30.4.1.5 |
rcIgmpSenderStateIndicates if a sender exists because of an
IGMP access filter or not.ro Enumeration .1.3.6.1.4.1.2272.1.30.4.1.6 |
rcIgmpSsmGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.30.5 |
rcIgmpSsmGlobalDynamicLearningEnable/disable dynamic learning
or source/group pair from IGMPv3 report.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.30.5.1 |
rcIgmpSsmGlobalAdminActionSet the admin status of all the Ssm entries to
enable/disable at once.rw Enumeration .1.3.6.1.4.1.2272.1.30.5.2 |
rcIgmpSsmGlobalRangeGroupIf multicast group address & RangeMask == RangeGroup,
then RangeGroup is in Ssm Range. Else it is not in
the range.rw IpAddress .1.3.6.1.4.1.2272.1.30.5.3 |
rcIgmpSsmGlobalRangeMaskUsed with RangeGroup.rw IpAddress .1.3.6.1.4.1.2272.1.30.5.4 |
rcIgmpSsmTabledeprecated SEQUENCE OF RcIgmpSsmEntry .1.3.6.1.4.1.2272.1.30.6 |
rcIgmpSsmEntrydeprecated RcIgmpSsmEntry .1.3.6.1.4.1.2272.1.30.6.1 |
rcIgmpSsmIpMulticastGrpThis is the IP multicast group address
that has default range of 232/8.
This parameter should be configured by the user.rodeprecated IpAddress .1.3.6.1.4.1.2272.1.30.6.1.1 |
rcIgmpSsmIpSourceThis is the Source's IP address that will
be sending traffic to the group source.
This parameter should be configured by the user.rwdeprecated IpAddress .1.3.6.1.4.1.2272.1.30.6.1.2 |
rcIgmpSsmLearningModeThis is a read only field that provides
information if the entry is statically
configured entry (Static) or a dynamically
learned entry from IGMPv3 (Dynamic). Note
that Dynamic may not be used in the first
step of the implementation.rodeprecated Enumeration .1.3.6.1.4.1.2272.1.30.6.1.3 |
rcIgmpSsmActivityThis is a read only field. It provides
the activity on the corresponding (S,G). If
the source is active and traffic is flowing
to the switch, this field value should be
Active, otherwise it should say non-active.
This information is useful in knowing if the
group has an active source or not when the group
is joined by a member on the switch.rodeprecated TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.30.6.1.4 |
rcIgmpSsmAdminStateThe admin state provides information on
whether the entry is to be used or not. If the
value of this field is Enabled (default), then
the entry can be used. If the state is Disabled,
then the entry will not be used, but will be
saved for future use.rwdeprecated EnableValue .1.3.6.1.4.1.2272.1.30.6.1.5 |
rcIgmpSsmRowStatusUsed to create/delete entries.rwdeprecated RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.30.6.1.6 |
rcIgmpNewAccessTable SEQUENCE OF RcIgmpNewAccessEntry .1.3.6.1.4.1.2272.1.30.7 |
rcIgmpNewAccessEntry RcIgmpNewAccessEntry .1.3.6.1.4.1.2272.1.30.7.1 |
rcIgmpNewAccessIfIndexifindexro InterfaceIndex .1.3.6.1.4.1.2272.1.30.7.1.1 |
rcIgmpNewAccessPrefixListIdPrefix List ID.ro Integer32 .1.3.6.1.4.1.2272.1.30.7.1.2 |
rcIgmpNewAccessPrefixListNamePrefix List name.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2272.1.30.7.1.3 |
rcIgmpNewAccessHostAddrhost addr.ro IpAddress .1.3.6.1.4.1.2272.1.30.7.1.4 |
rcIgmpNewAccessHostMaskhost mask.ro IpAddress .1.3.6.1.4.1.2272.1.30.7.1.5 |
rcIgmpNewAccessActionModeaction mode.rw Enumeration .1.3.6.1.4.1.2272.1.30.7.1.6 |
rcIgmpNewAccessRowStatusUsed to create/delete entries in the rcIgmpNewAccessEntry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.30.7.1.7 |
rcIgmpChannelLimitTable SEQUENCE OF RcIgmpChannelLimitEntry .1.3.6.1.4.1.2272.1.30.8 |
rcIgmpChannelLimitEntry RcIgmpChannelLimitEntry .1.3.6.1.4.1.2272.1.30.8.1 |
rcIgmpChannelLimitIfIndexifindexro InterfaceIndex .1.3.6.1.4.1.2272.1.30.8.1.1 |
rcIgmpChannelLimitPortThe port belong to this vlan.ro Integer32 .1.3.6.1.4.1.2272.1.30.8.1.2 |
rcIgmpChannelLimitMaxStreamsMaximum number of stream.rw Integer32 .1.3.6.1.4.1.2272.1.30.8.1.3 |
rcIgmpChannelLimitNumStreamsCurrent number of streams.ro Integer32 .1.3.6.1.4.1.2272.1.30.8.1.4 |
rcIgmpChannelLimitRowStatusRow Status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.30.8.1.5 |
rcIgmpGlobalParams OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.30.11 |
rcIgmpFastLeaveModeSet the fast-leave mode to be used by for all
fast-leave enabled IGMP interfaces.rw Enumeration .1.3.6.1.4.1.2272.1.30.11.1 |
rcIgmpGenerateTrapEnabling the IGMP to generate trap.rw EnableValue .1.3.6.1.4.1.2272.1.30.11.2 |
rcIgmpGenerateLogEnabling the IGMP to generate log.rw EnableValue .1.3.6.1.4.1.2272.1.30.11.3 |
rcIgmpCacheExtnTable SEQUENCE OF RcIgmpCacheExtnEntry .1.3.6.1.4.1.2272.1.30.12 |
rcIgmpCacheExtnEntry RcIgmpCacheExtnEntry .1.3.6.1.4.1.2272.1.30.12.1 |
rcIgmpCacheExtnTypeIt takes up either of the two values, dynamic
or static depending upon whether the entry is
learnt Dynamic or is added statically.ro Enumeration .1.3.6.1.4.1.2272.1.30.12.1.1 |
rcIgmpCacheExtnStaticPortsIt displays the static ports for the static joins,
this would be null for the dynamic entry.ro PortSet .1.3.6.1.4.1.2272.1.30.12.1.2 |
rcIgmpSnoopTraceTableThe table listing the multicast groups
traversing the snoop enabled router SEQUENCE OF RcIgmpSnoopTraceEntry .1.3.6.1.4.1.2272.1.30.13 |
rcIgmpSnoopTraceEntryThe entry listing the multicast groups
traversing the snoop enabled router RcIgmpSnoopTraceEntry .1.3.6.1.4.1.2272.1.30.13.1 |
rcIgmpSnoopGrpAddrip mcast addr of grp traversing the router IpAddress .1.3.6.1.4.1.2272.1.30.13.1.1 |
rcIgmpSnoopSrcAddrIp src addr of the mcast grp address IpAddress .1.3.6.1.4.1.2272.1.30.13.1.2 |
rcIgmpSnoopOutVlanEgress vlan id for the mcast group InterfaceIndex .1.3.6.1.4.1.2272.1.30.13.1.3 |
rcIgmpSnoopInPortIngress port for the mcast grpro InterfaceIndex .1.3.6.1.4.1.2272.1.30.13.1.4 |
rcIgmpSnoopInVlanIngress vlan id for the mcast sourcero InterfaceIndex .1.3.6.1.4.1.2272.1.30.13.1.5 |
rcIgmpSnoopOutPortEgress port of the mcast grpro PortSet .1.3.6.1.4.1.2272.1.30.13.1.6 |
rcIgmpNewGroupTableThe (conceptual) table listing the multicast
groups configured in the device. SEQUENCE OF RcIgmpNewGroupEntry .1.3.6.1.4.1.2272.1.30.14 |
rcIgmpNewGroupEntryAn entry (conceptual row) representing an
Igmp group. RcIgmpNewGroupEntry .1.3.6.1.4.1.2272.1.30.14.1 |
rcIgmpNewGroupIpAddressMulticast group Address (Class D) that others
want to join. A group address can be the same
for many incoming ports. IpAddress .1.3.6.1.4.1.2272.1.30.14.1.1 |
rcIgmpNewGroupMembersIP Address of a source that has sent group
report wishing to join this group. IpAddress .1.3.6.1.4.1.2272.1.30.14.1.2 |
rcIgmpNewGroupInPortAn unique value to identify a physical
interface or a logical interface (VLAN),
which has received Group reports from various
sources. INTEGER .1.3.6.1.4.1.2272.1.30.14.1.3 |
rcIgmpNewGroupExpirationTime left before the group report expired on this
port. Only one of this variable port. This
variable is updated upon receiving a group report.ro Integer32 .1.3.6.1.4.1.2272.1.30.14.1.4 |
rcIgmpNewGroupIfIndexAn unique value to identify a physical
interface or a logical interface (VLAN),
which has received Group reports from various
sources.ro InterfaceIndex .1.3.6.1.4.1.2272.1.30.14.1.5 |
rcIgmpNewGroupUserIdUser-id sending this groupro DisplayString .1.3.6.1.4.1.2272.1.30.14.1.6 |
rcIgmpNewGroupMemberStateUsed for IGAP, to indicated member state.ro Enumeration .1.3.6.1.4.1.2272.1.30.14.1.7 |
rcIgmpNewGroupSessionTimeUsed for IGAP, to indicated the session time
in seconds for the member. Session time is
started after traffic is available to member.
It can be also called AccountingTime since its
values correspondes to the accounting duration of
IGAP user session.ro Integer32 .1.3.6.1.4.1.2272.1.30.14.1.8 |
rcIgmpv3CacheTableThe (conceptual) table listing the Igmpv3 specific data
corresponding to each interface, port and multicast group pair on
a Router. SEQUENCE OF RcIgmpv3CacheEntry .1.3.6.1.4.1.2272.1.30.24 |
rcIgmpv3CacheEntryAn entry (conceptual row) representing an Igmpv3 Group. RcIgmpv3CacheEntry .1.3.6.1.4.1.2272.1.30.24.1 |
rcIgmpv3CacheEntryGroupAddressMulticast group Address (Class D) that others
want to join. A group address can be the same
for many incoming ports. IpAddress .1.3.6.1.4.1.2272.1.30.24.1.1 |
rcIgmpv3CacheEntryIfIndexAn unique value to identify a physical
interface or a logical interface (VLAN),
which has received Group reports from various
sources. InterfaceIndex .1.3.6.1.4.1.2272.1.30.24.1.2 |
rcIgmpv3CacheEntryInPortAn unique value to identify a physical
interface or a logical interface (VLAN),
which has received Group reports from various
sources. INTEGER .1.3.6.1.4.1.2272.1.30.24.1.3 |
rcIgmpv3CacheEntryModeExpiryTimerThis value is applicable only to IGMPv3-compatible nodes
and represents the time remaining before the interface
EXCLUDE state expires and the interface state transitions
to INCLUDE mode. This value can never be greater than
rcIgmpNewGroupExpiration.ro Integer32 .1.3.6.1.4.1.2272.1.30.24.1.4 |
rcIgmpv3CacheEntryVersion1HostTimerThe time remaining until the local router will assume that
there are no longer any IGMP version 1 members on the IP
subnet attached to this interface. This entry only applies
to IGMPv1 hosts. Upon hearing any IGMPv1 Report, this
value is reset to the group membership timer. While this
time remaining is non-zero, the local router ignores any
IGMPv2 Leave messages for this group that it receives
on this interface.ro Integer32 .1.3.6.1.4.1.2272.1.30.24.1.5 |
rcIgmpv3CacheEntryVersion2HostTimerThe time remaining until the local router will assume that
there are no longer any IGMP version 2 members on the IP
subnet attached to this interface. Upon hearing any IGMPv2 Membership
Report, this value is reset to the group membership timer.
Assuming no IGMPv1 hosts have been detected, the local
router does not ignore any IGMPv2 Leave messages for this
group that it receives on this interface.ro Integer32 .1.3.6.1.4.1.2272.1.30.24.1.6 |
rcIgmpv3CacheEntrySourceFilterModeThe current group state, applicable to IGMPv3-compatible
nodes. The value indicates whether the state is INCLUDE or
EXCLUDE.ro Enumeration .1.3.6.1.4.1.2272.1.30.24.1.7 |
rcIgmpRouterSrcListTableThe (conceptual) table listing the Source List entries
corresponding to each interface and multicast group pair on
a Router. SEQUENCE OF RcIgmpRouterSrcListEntry .1.3.6.1.4.1.2272.1.30.25 |
rcIgmpRouterSrcListEntryAn entry (conceptual row) representing an
Igmp Source. RcIgmpRouterSrcListEntry .1.3.6.1.4.1.2272.1.30.25.1 |
rcIgmpRouterSrcListGroupAddressThe IP multicast group address for which this entry
contains information. IpAddress .1.3.6.1.4.1.2272.1.30.25.1.1 |
rcIgmpRouterSrcListIfIndexThe interface for which this entry contains information
for an IP multicast group address. InterfaceIndex .1.3.6.1.4.1.2272.1.30.25.1.2 |
rcIgmpRouterSrcListInPortAn unique value to identify a physical
interface or a logical interface (VLAN),
which has received Group reports for this
source. INTEGER .1.3.6.1.4.1.2272.1.30.25.1.3 |
rcIgmpRouterSrcListHostAddressThe host address to which this entry corresponds. IpAddress .1.3.6.1.4.1.2272.1.30.25.1.4 |
rcIgmpRouterSrcListMemberAddressIP Address of a member that has sent source specific
report wishing to join this source. IpAddress .1.3.6.1.4.1.2272.1.30.25.1.5 |
rcIgmpRouterSrcListExpireThis value indicates the relevance of the SrcList entry,
whereby a non-zero value indicates this is an INCLUDE state
value, and a zero value indicates this to be an EXCLUDE
state value.ro Integer32 .1.3.6.1.4.1.2272.1.30.25.1.6 |
rcIgmpRouterSrcListModeThe current member state, applicable to IGMPv3-compatible
nodes. The value indicates whether the state is INCLUDE or
EXCLUDE.ro Enumeration .1.3.6.1.4.1.2272.1.30.25.1.7 |
rcIgmpRouterSrcListMemberExpireThis value indicates the time until the member for this source
will expirero Integer32 .1.3.6.1.4.1.2272.1.30.25.1.8 |
rcIgmpNewSsmTable SEQUENCE OF RcIgmpNewSsmEntry .1.3.6.1.4.1.2272.1.30.26 |
rcIgmpNewSsmEntry RcIgmpNewSsmEntry .1.3.6.1.4.1.2272.1.30.26.1 |
rcIgmpNewSsmIpMulticastGrpThis is the IP multicast group address
that has default range of 232/8.
This parameter should be configured by the user. IpAddress .1.3.6.1.4.1.2272.1.30.26.1.1 |
rcIgmpNewSsmIpSourceThis is the Source's IP address that will
be sending traffic to the group source.
This parameter should be configured by the user. IpAddress .1.3.6.1.4.1.2272.1.30.26.1.2 |
rcIgmpNewSsmLearningModeThis is a read only field that provides
information if the entry is statically
configured entry (Static) or a dynamically
learned entry from IGMPv3 (Dynamic). Note
that Dynamic may not be used in the first
step of the implementation.ro Enumeration .1.3.6.1.4.1.2272.1.30.26.1.3 |
rcIgmpNewSsmActivityThis is a read only field. It provides
the activity on the corresponding (S,G). If
the source is active and traffic is flowing
to the switch, this field value should be
Active, otherwise it should say non-active.
This information is useful in knowing if the
group has an active source or not when the group
is joined by a member on the switch.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.30.26.1.4 |
rcIgmpNewSsmAdminStateThe admin state provides information on
whether the entry is to be used or not. If the
value of this field is Enabled (default), then
the entry can be used. If the state is Disabled,
then the entry will not be used, but will be
saved for future use.rw EnableValue .1.3.6.1.4.1.2272.1.30.26.1.5 |
rcIgmpNewSsmRowStatusUsed to create/delete entries.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.30.26.1.6 |
rcUserSetTime OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.31 |
rcUserSetTimeYearYear of the time.rw INTEGER .1.3.6.1.4.1.2272.1.31.1 |
rcUserSetTimeMonthMonth of the time.rw INTEGER .1.3.6.1.4.1.2272.1.31.2 |
rcUserSetTimeDateDate of the time.rw INTEGER .1.3.6.1.4.1.2272.1.31.3 |
rcUserSetTimeHourHour of the time.rw INTEGER .1.3.6.1.4.1.2272.1.31.4 |
rcUserSetTimeMinuteMinute of the time.rw INTEGER .1.3.6.1.4.1.2272.1.31.5 |
rcUserSetTimeSecondSecond of the time.rw INTEGER .1.3.6.1.4.1.2272.1.31.6 |
rcUserSetTimeTimezoneTimezone values. Since + is not a valid character inside enum
declaration, E(ast) and W(est) are used to indicate + and -
respectively. For example, etc-GMTE1 indicates Etc-GMT+1 and
etc-GMTW1 indicates Etc-GMT-1.rw Enumeration .1.3.6.1.4.1.2272.1.31.7 |
rcL2Redundancy OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.32 |
rcL2RedundancyHaCpuStateIndicate the Ha-CPU state.
initialization - indicate the CPU is in this state.
oneWayActive - Modules that need to be
synchronized have registered with the framework (either
locally or a message was received from remote CPU (1).
twoWayActive - Modules that need to be synchronized have
registered with the framework (either locally or a message
was received from remote CPU (2).
synchronized - Table based synchroniztion was completed
on the current CPU (3).
remoteIncompatible - CPUs framework version is incompatible
with the remote CPU (4).
error - If an invalid event is generated in a given state the
CPU enters Error state (5).
disabled - High Availability is not enabled (6).
peerNotConnected - no peer connection is established (7).
peerConnected - peer connection is established (8).
lostPeerConnection - lost connection to peer/Standby CPU (9).
notSynchronized - Table Sync is not complete (10).
synchronizeInProgress - Table Sync is in progress (11).ro Enumeration .1.3.6.1.4.1.2272.1.32.1 |
rcL2RedundancyHaEventIndicate the Ha event status.
restart (0) - Causes the state machine to restart
systemRegistrationDone (1)- Causes the CPU to transfer to
One Way or Two Way Active state. Locally or message received
from remote CPU.
tableSynchronizationDone (2) - Causes the CPU to
transfer to Synchronized state.
versionIncompatible (3) - Causes the CPU to go to Remote
Incompatible state
noEvent (4) - Means no event has occured uptill now.ro Enumeration .1.3.6.1.4.1.2272.1.32.2 |
rcL2RedundancyEnableIndicate the feature enable/disable.rw EnableValue .1.3.6.1.4.1.2272.1.32.3 |
rcL2RedundancyStandbyCpuIndicate if the L2 Redundancy is enabled on the standby CPU.ro Enumeration .1.3.6.1.4.1.2272.1.32.4 |
rcNtp OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.33 |
rcNtpGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.33.1 |
rcNtpGlobalEnableEnable/disable NTP featurerw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.33.1.1 |
rcNtpGlobalIntervalTime interval between successive NTP updates in minutes.rw INTEGER .1.3.6.1.4.1.2272.1.33.1.2 |
rcNtpServerTableThe NTP server table. This table lists the information
of a NTP server SEQUENCE OF RcNtpServerEntry .1.3.6.1.4.1.2272.1.33.2 |
rcNtpServerEntryA NTP server table entry. RcNtpServerEntry .1.3.6.1.4.1.2272.1.33.2.1 |
rcNtpServerAddressServer IP address of NTP time source referred to in
this table entry.ro IpAddress .1.3.6.1.4.1.2272.1.33.2.1.1 |
rcNtpServerEnableEnable or disable this server for participation in
time update.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.33.2.1.2 |
rcNtpServerAuthenticationEnable or disable the MD5 Authentication on this
serve.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.33.2.1.3 |
rcNtpServerKeyIdPublic Key used to generate MD5 digest for this
server.rw INTEGER .1.3.6.1.4.1.2272.1.33.2.1.4 |
rcNtpServerAccessAttemptsThe number of NTP requests sent to this serverro Counter32 .1.3.6.1.4.1.2272.1.33.2.1.5 |
rcNtpServerAccessSuccessThe number of times this server was selected to
update the timero Counter32 .1.3.6.1.4.1.2272.1.33.2.1.6 |
rcNtpServerAccessFailureThe number of times this server was rejected from
updating the timero Counter32 .1.3.6.1.4.1.2272.1.33.2.1.7 |
rcNtpServerRowStatusUsed to create/delete entries.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.33.2.1.8 |
rcNtpServerStratumStratum of this serverro DisplayString .1.3.6.1.4.1.2272.1.33.2.1.9 |
rcNtpServerVersionNTP version of this serverro DisplayString .1.3.6.1.4.1.2272.1.33.2.1.10 |
rcNtpServerRootDelayRoot Delay of this serverro DisplayString .1.3.6.1.4.1.2272.1.33.2.1.11 |
rcNtpServerPrecisionNTP precision of this server in secondsro DisplayString .1.3.6.1.4.1.2272.1.33.2.1.12 |
rcNtpServerReachableNTP Reachability of this serverro DisplayString .1.3.6.1.4.1.2272.1.33.2.1.13 |
rcNtpServerSynchronizedStatus of synchronization with this serverro DisplayString .1.3.6.1.4.1.2272.1.33.2.1.14 |
rcNtpKeyTableThe NTP key table. This table lists the private key
of the public key Id SEQUENCE OF RcNtpKeyEntry .1.3.6.1.4.1.2272.1.33.3 |
rcNtpKeyEntryA NTP key table entry. RcNtpKeyEntry .1.3.6.1.4.1.2272.1.33.3.1 |
rcNtpKeyIdPublic Key used to generate MD5 digestro INTEGER .1.3.6.1.4.1.2272.1.33.3.1.1 |
rcNtpKeySecretPrivate Key used to generate MD5 Digestrw DisplayString .1.3.6.1.4.1.2272.1.33.3.1.2 |
rcNtpKeyRowStatusUsed to create/delete entries.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.33.3.1.3 |
rcSsh OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.34 |
rcSshGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.34.1 |
rcSshGlobalVersionSSH versionrw Enumeration .1.3.6.1.4.1.2272.1.34.1.1 |
rcSshGlobalPortSSH connection port.rw Integer32 .1.3.6.1.4.1.2272.1.34.1.2 |
rcSshGlobalMaxSessionNumber of session allowed.rw INTEGER .1.3.6.1.4.1.2272.1.34.1.3 |
rcSshGlobalTimeoutSSH connection timeout in seconds.rw INTEGER .1.3.6.1.4.1.2272.1.34.1.4 |
rcSshGlobalRsaKeySizeSSH Rsa key size.rw INTEGER .1.3.6.1.4.1.2272.1.34.1.5 |
rcSshGlobalDsaKeySizeSSH Dsa key size.rw INTEGER .1.3.6.1.4.1.2272.1.34.1.6 |
rcSshGlobalRsaAuthEnable/disable SSH RSA authenticationrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.34.1.7 |
rcSshGlobalDsaAuthEnable/disable SSH DSA authenticationrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.34.1.8 |
rcSshGlobalPassAuthEnable/disable SSH RSA authenticationrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.34.1.9 |
rcSshGlobalKeyActionSSH key action.rw Enumeration .1.3.6.1.4.1.2272.1.34.1.10 |
rcSshGlobalEnableEnable/disable, or securely enable SSH. Securely enable
turns off other daemon flag, and it takes ffect afte rebootrw Enumeration .1.3.6.1.4.1.2272.1.34.1.11 |
rcSshGlobalHostIpAddrcurrent remote ip addrrw IpAddress .1.3.6.1.4.1.2272.1.34.1.12 |
rcSslMipTableThis table would display the MIP of the SSL blade
according to the slot number. SEQUENCE OF RcSslMipEntry .1.3.6.1.4.1.2272.1.34.2 |
rcSslMipTableEntryThis table get the MIP of the SSL blade on which
the blade is in different cluster. RcSslMipEntry .1.3.6.1.4.1.2272.1.34.2.1 |
rcSslMipSlotUsed as an index to find out the MIP of SSL blade.ro Integer32 .1.3.6.1.4.1.2272.1.34.2.1.1 |
rcSslMipMipMaster IP of the SSL blade.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2272.1.34.2.1.2 |
rcSvlan OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.35 |
rcTengEnet OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.50 |
rcTengEnetStats OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.50.1 |
rcTengDot3StatsTableStatistics for a collection of ethernet-like
interfaces attached to a particular system. SEQUENCE OF RcTengDot3StatsEntry .1.3.6.1.4.1.2272.1.50.1.1 |
rcTengDot3StatsEntryStatistics for a particular interface to an
ethernet-like medium. RcTengDot3StatsEntry .1.3.6.1.4.1.2272.1.50.1.1.1 |
rcTengDot3StatsIndexAn index value that uniquely identifies an
interface to an ethernet-like medium. The
interface identified by a particular value of
this index is the same interface as identified
by the same value of ifIndex.ro Integer32 .1.3.6.1.4.1.2272.1.50.1.1.1.1 |
rcTengDot3StatsAlignmentErrorsA count of frames received on a particular
interface that are not an integral number of
octets in length and do not pass the FCS check.
The count represented by an instance of this
object is incremented when the alignmentError
status is returned by the MAC service to the
LLC (or other MAC user). Received frames for
which multiple error conditions obtain are,
according to the conventions of IEEE 802.3
Layer Management, counted exclusively according
to the error status presented to the LLC.ro Counter64 .1.3.6.1.4.1.2272.1.50.1.1.1.2 |
rcTengDot3StatsFCSErrorsA count of frames received on a particular
interface that are an integral number of octets
in length but do not pass the FCS check.
The count represented by an instance of this
object is incremented when the frameCheckError
status is returned by the MAC service to the
LLC (or other MAC user). Received frames for
which multiple error conditions obtain are,
according to the conventions of IEEE 802.3
Layer Management, counted exclusively according
to the error status presented to the LLC.ro Counter64 .1.3.6.1.4.1.2272.1.50.1.1.1.3 |
rcTengDot3StatsSingleCollisionFramesA count of successfully transmitted frames on
a particular interface for which transmission
is inhibited by exactly one collision.
A frame that is counted by an instance of this
object is also counted by the corresponding
instance of either the ifOutUcastPkts,
ifOutMulticastPkts, or ifOutBroadcastPkts,
and is not counted by the corresponding
instance of the dot3StatsMultipleCollisionFrames
object.ro Counter64 .1.3.6.1.4.1.2272.1.50.1.1.1.4 |
rcTengDot3StatsMultipleCollisionFramesA count of successfully transmitted frames on
a particular interface for which transmission
is inhibited by more than one collision.
A frame that is counted by an instance of this
object is also counted by the corresponding
instance of either the ifOutUcastPkts,
ifOutMulticastPkts, or ifOutBroadcastPkts,
and is not counted by the corresponding
instance of the dot3StatsSingleCollisionFrames
object.ro Counter64 .1.3.6.1.4.1.2272.1.50.1.1.1.5 |
rcTengDot3StatsSQETestErrorsA count of times that the SQE TEST ERROR
message is generated by the PLS sublayer for a
particular interface. The SQE TEST ERROR
message is defined in section 7.2.2.2.4 of
ANSI/IEEE 802.3-1985 and its generation is
described in section 7.2.4.6 of the same
document.ro Counter64 .1.3.6.1.4.1.2272.1.50.1.1.1.6 |
rcTengDot3StatsDeferredTransmissionsA count of frames for which the first
transmission attempt on a particular interface
is delayed because the medium is busy.
The count represented by an instance of this
object does not include frames involved in
collisions.ro Counter64 .1.3.6.1.4.1.2272.1.50.1.1.1.7 |
rcTengDot3StatsLateCollisionsThe number of times that a collision is
detected on a particular interface later than
512 bit-times into the transmission of a
packet.
Five hundred and twelve bit-times corresponds
to 51.2 microseconds on a 10 Mbit/s system. A
(late) collision included in a count
represented by an instance of this object is
also considered as a (generic) collision for
purposes of other collision-related
statistics.ro Counter64 .1.3.6.1.4.1.2272.1.50.1.1.1.8 |
rcTengDot3StatsExcessiveCollisionsA count of frames for which transmission on a
particular interface fails due to excessive
collisions.ro Counter64 .1.3.6.1.4.1.2272.1.50.1.1.1.9 |
rcTengDot3StatsInternalMacTransmitErrorsA count of frames for which transmission on a
particular interface fails due to an internal
MAC sublayer transmit error. A frame is only
counted by an instance of this object if it is
not counted by the corresponding instance of
either the rcTengDot3StatsLateCollisions object, the
rcTengDot3StatsExcessiveCollisions object, or the
rcTengDot3StatsCarrierSenseErrors object.
The precise meaning of the count represented by
an instance of this object is implementation-
specific. In particular, an instance of this
object may represent a count of transmission
errors on a particular interface that are not
otherwise counted.ro Counter64 .1.3.6.1.4.1.2272.1.50.1.1.1.10 |
rcTengDot3StatsCarrierSenseErrorsThe number of times that the carrier sense
condition was lost or never asserted when
attempting to transmit a frame on a particular
interface.
The count represented by an instance of this
object is incremented at most once per
transmission attempt, even if the carrier sense
condition fluctuates during a transmission
attempt.ro Counter64 .1.3.6.1.4.1.2272.1.50.1.1.1.11 |
rcTengDot3StatsFrameTooLongsA count of frames received on a particular
interface that exceed the maximum permitted
frame size.
The count represented by an instance of this
object is incremented when the frameTooLong
status is returned by the MAC service to the
LLC (or other MAC user). Received frames for
which multiple error conditions obtain are,
according to the conventions of IEEE 802.3
Layer Management, counted exclusively according
to the error status presented to the LLC.ro Counter64 .1.3.6.1.4.1.2272.1.50.1.1.1.13 |
rcTengDot3StatsInternalMacReceiveErrorsA count of frames for which reception on a
particular interface fails due to an internal
MAC sublayer receive error. A frame is only
counted by an instance of this object if it is
not counted by the corresponding instance of
either the rcTengDot3StatsFrameTooLongs object, the
rcTengDot3StatsAlignmentErrors object, or the
rcTengDot3StatsFCSErrors object.
The precise meaning of the count represented by
an instance of this object is implementation-
specific. In particular, an instance of this
object may represent a count of receive errors
on a particular interface that are not
otherwise counted.ro Counter64 .1.3.6.1.4.1.2272.1.50.1.1.1.16 |
rcTengDot3StatsEtherChipSetThis object contains an OBJECT IDENTIFIER
which identifies the chipset used to
realize the interface. Ethernet-like
interfaces are typically built out of
several different chips. The MIB implementor
is presented with a decision of which chip
to identify via this object. The implementor
should identify the chip which is usually
called the Medium Access Control chip.
If no such chip is easily identifiable,
the implementor should identify the chip
which actually gathers the transmit
and receive statistics and error
indications. This would allow a
manager station to correlate the
statistics and the chip generating
them, giving it the ability to take
into account any known anomalies
in the chip.ro OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.50.1.1.1.17 |
rcTengDot3StatsLinkFailuresThe total number of link failures enCounter32ed on
this interface.ro Counter32 .1.3.6.1.4.1.2272.1.50.1.1.1.18 |
rcTengDot3StatsPacketErrorsThe total number of packet errors enCounter32ed on
this interface.ro Counter32 .1.3.6.1.4.1.2272.1.50.1.1.1.19 |
rcTengDot3StatsCarrierErrorsThe total number of carrier errors enCounter32ed on
this interface.ro Counter32 .1.3.6.1.4.1.2272.1.50.1.1.1.20 |
rcTengDot3StatsLinkInactiveErrorsThe total number of link inactive errors enCounter32ed
on this interface.ro Counter32 .1.3.6.1.4.1.2272.1.50.1.1.1.21 |
rcTengDot3StatsInFlowCtrlPktsThe total number of flow control packets received
by this interface.ro Counter64 .1.3.6.1.4.1.2272.1.50.1.1.1.22 |
rcTengDot3StatsOutFlowCtrlPktsThe total number of flow control packets transmitted
by this interface.ro Counter64 .1.3.6.1.4.1.2272.1.50.1.1.1.23 |
rcTengDot3StatsFrameTooShortsThe total number of frames that are too short
that were enCounter32ed on this interface.ro Counter64 .1.3.6.1.4.1.2272.1.50.1.1.1.24 |
rcTengDot3StatsInPfcPktsThe total number of Priority Flow Control (PFC)
packets received by this interface.ro Counter64 .1.3.6.1.4.1.2272.1.50.1.1.1.26 |
rcTengDot3StatsOutPfcPktsThe total number of Priority Flow Control (PFC)
packets transmitted by this interface.ro Counter64 .1.3.6.1.4.1.2272.1.50.1.1.1.27 |
rcTengStatTableA table used to store port statistics. SEQUENCE OF RcTengStatEntry .1.3.6.1.4.1.2272.1.50.1.2 |
rcTengStatEntryinterface Counter32s RcTengStatEntry .1.3.6.1.4.1.2272.1.50.1.2.1 |
rcTengStatIndexAn index value that uniquely identifies a port.
This value is similar to ifIndex in MIB2.ro Integer32 .1.3.6.1.4.1.2272.1.50.1.2.1.1 |
rcTengStatBridgeInUnicastFramesThe total number of incoming unicast frames that
were bridged.ro Counter32 .1.3.6.1.4.1.2272.1.50.1.2.1.2 |
rcTengStatBridgeInMulticastFramesThe total number of incoming multicast frames that
were bridged.ro Counter32 .1.3.6.1.4.1.2272.1.50.1.2.1.3 |
rcTengStatBridgeInBroadcastFramesThe total number of incoming broadcast frames that
were bridged.ro Counter32 .1.3.6.1.4.1.2272.1.50.1.2.1.4 |
rcTengStatBridgeInDiscardsThe total number of frames that were discarded by
the bridging entity.ro Counter32 .1.3.6.1.4.1.2272.1.50.1.2.1.5 |
rcTengStatBridgeOutUnicastFramesThe total number of outgoing unicast frames that
were bridged.ro Counter32 .1.3.6.1.4.1.2272.1.50.1.2.1.6 |
rcTengStatBridgeOutMulticastFramesThe total number of outgoing multicast frames that
were bridged.ro Counter32 .1.3.6.1.4.1.2272.1.50.1.2.1.7 |
rcTengStatBridgeOutBroadcastFramesThe total number of outgoing broadcast frames that
were bridged.ro Counter32 .1.3.6.1.4.1.2272.1.50.1.2.1.8 |
rcTengStatRouteInUnicastFramesThe total number of incoming unicast frames that
were routed.ro Counter32 .1.3.6.1.4.1.2272.1.50.1.2.1.9 |
rcTengStatRouteInMulticastFramesThe total number of incoming multicast frames that
were routed.ro Counter32 .1.3.6.1.4.1.2272.1.50.1.2.1.10 |
rcTengStatRouteInDiscardsThe total number of frames that were discarded by
the routing entity.ro Counter32 .1.3.6.1.4.1.2272.1.50.1.2.1.11 |
rcTengStatRouteOutUnicastFramesThe total number of outgoing unicast frames that
were routed.ro Counter32 .1.3.6.1.4.1.2272.1.50.1.2.1.12 |
rcTengStatRouteOutMulticastFramesThe total number of outgoing multicast frames that
were routed.ro Counter32 .1.3.6.1.4.1.2272.1.50.1.2.1.13 |
rcTengStatStgForwardTransitionsThe number of times this port has transitioned
from the Learning state to the Forwarding state.ro Counter32 .1.3.6.1.4.1.2272.1.50.1.2.1.14 |
rcTengStatStgInConfigBpdusro Counter32 .1.3.6.1.4.1.2272.1.50.1.2.1.15 |
rcTengStatStgInTcnBpdusro Counter32 .1.3.6.1.4.1.2272.1.50.1.2.1.16 |
rcTengStatStgInBadBpdusro Counter32 .1.3.6.1.4.1.2272.1.50.1.2.1.17 |
rcTengStatStgOutConfigBpdusro Counter32 .1.3.6.1.4.1.2272.1.50.1.2.1.18 |
rcTengStatStgOutTcnBpdusro Counter32 .1.3.6.1.4.1.2272.1.50.1.2.1.19 |
rcTengStatBridgeOutFramesUsed by the Accelar 8000 product family to account
for all transmitted bridge unicast, broadcast, and
multicast packets. The individual Counter32s are not
supported.ro Counter32 .1.3.6.1.4.1.2272.1.50.1.2.1.20 |
rcTengIfTableA list of interface entries. The number of entries
is given by the value of engIfNumber. SEQUENCE OF RcTengIfEntry .1.3.6.1.4.1.2272.1.50.1.3 |
rcTengIfEntryAn entry containing management information applicable
to a particular interface. RcTengIfEntry .1.3.6.1.4.1.2272.1.50.1.3.1 |
rcTengIfIndexA unique value, greater than zero, for each
interface. It is recommended that values are assigned
contiguously starting from 1. The value for each
interface sub-layer must remain constant at least from
one re-initialization of the entity's network
management system to the next re-initialization.ro InterfaceIndex .1.3.6.1.4.1.2272.1.50.1.3.1.1 |
rcTengIfDescrA textual string containing information about the
interface. This string should include the name of the
manufacturer, the product name and the version of the
interface hardware/software.ro DisplayString .1.3.6.1.4.1.2272.1.50.1.3.1.2 |
rcTengIfTypeThe type of interface. Additional values for IfType
are assigned by the Internet Assigned Numbers
Authority (IANA), through updating the syntax of the
IANAifType textual convention.ro Enumeration .1.3.6.1.4.1.2272.1.50.1.3.1.3 |
rcTengIfMtuThe size of the largest packet which can be
sent/received on the interface, specified in octets.
For interfaces that are used for transmitting network
datagrams, this is the size of the largest network
datagram that can be sent on the interface.ro Integer32 .1.3.6.1.4.1.2272.1.50.1.3.1.4 |
rcTengIfSpeedAn estimate of the interface's current bandwidth in
bits per second. For interfaces which do not vary in
bandwidth or for those where no accurate estimation
can be made, this object should contain the nominal
bandwidth. If the bandwidth of the interface is
greater than the maximum value reportable by this
object then this object should report its maximum
value (4,294,967,295) and ifHighSpeed must be used to
report the interace's speed. For a sub-layer which
has no concept of bandwidth, this object should be
zero.ro Gauge32 .1.3.6.1.4.1.2272.1.50.1.3.1.5 |
rcTengIfPhysAddressThe interface's address at its protocol sub-layer.
The interface's media-specific MIB must define the bit
and byte ordering and format of the value contained by
this object. For interfaces which do not have such an
address (e.g., a serial line), this object should
contain an octet string of zero length.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.2272.1.50.1.3.1.6 |
rcTengIfAdminStatusThe desired state of the interface. The testing(3)
state indicates that no operational packets can be
passed. When a managed system initializes, all
interfaces start with IfAdminStatus in the down(2)
state. As a result of either explicit management
action or per configuration information retained by
the managed system, IfAdminStatus is then changed to
either the up(1) or testing(3) states (or remains in
the down(2) state).rw Enumeration .1.3.6.1.4.1.2272.1.50.1.3.1.7 |
rcTengIfOperStatusThe current operational state of the interface. The
testing(3) state indicates that no operational packets
can be passed. If IfAdminStatus is down(2) then
IfOperStatus should be down(2). If IfAdminStatus is
changed to up(1) then ifOperStatus should change to
up(1) if the interface is ready to transmit and
receive network traffic; it should change to
dormant(5) if the interface is waiting for external
actions (such as a serial line waiting for an
incomming connection); it should remain in the down(2)
state if and only if there is a fault that prevents if
from going to the up(1) state.ro Enumeration .1.3.6.1.4.1.2272.1.50.1.3.1.8 |
rcTengIfLastChangeThe value of sysUpTime at the time the interface
entered its current operational state. If the current
state was entered prior to the last re-initialization
of the local network management subsystem, then this
object contains a zero value.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2272.1.50.1.3.1.9 |
rcTengIfInOctetsThe total number of octets received on the interface,
including framing characters.ro Counter64 .1.3.6.1.4.1.2272.1.50.1.3.1.10 |
rcTengIfInUcastPktsThe number of packets, delivered by this sub-layer to
a higher (sub-)layer, which were not addressed to a
multicast or broadcast address at this sub-layer.ro Counter64 .1.3.6.1.4.1.2272.1.50.1.3.1.11 |
rcTengIfInDiscardsThe number of inbound packets which were chosen to be
discarded even though no errors had been detected to
prevent their being deliverable to a higher-layer
protocol. One possible reason for discarding such a
packet could be to free up buffer space.ro Counter64 .1.3.6.1.4.1.2272.1.50.1.3.1.13 |
rcTengIfInErrorsFor packet-oriented interfaces, the number of inbound
packets that contained errors preventing them from
being deliverable to a higher-layer protocol. For
character-oriented or fixed-length interfaces, the
number of inbound transmission units that contained
errors preventing them from being deliverable to a
higher-layer protocol.ro Counter64 .1.3.6.1.4.1.2272.1.50.1.3.1.14 |
rcTengIfInUnknownProtosFor packet-oriented interfaces, the number of packets
received via the interface which were discarded
because of an unknown or unsupported protocol. For
character-oriented or fixed-length interfaces which
support protocol multiplexing the number of
transmission units received via the interface which
were discarded because of an unknown or unsupported
protocol. For any interface which does not support
protocol multiplexing, this counter will always be 0.ro Counter64 .1.3.6.1.4.1.2272.1.50.1.3.1.15 |
rcTengIfOutOctetsThe total number of octets transmitted out of the
interface, including framing characters.ro Counter64 .1.3.6.1.4.1.2272.1.50.1.3.1.16 |
rcTengIfOutUcastPktsThe total number of packets that higher-level
protocols requested be transmitted, and which were not
addressed to a multicast or broadcast address at this
sub-layer, including those that were discarded or not
sent.ro Counter64 .1.3.6.1.4.1.2272.1.50.1.3.1.17 |
rcTengIfOutDiscardsThe number of outbound packets which were chosen to
be discarded even though no errors had been detected
to prevent their being transmitted. One possible
reason for discarding such a packet could be to free
up buffer space.ro Counter64 .1.3.6.1.4.1.2272.1.50.1.3.1.19 |
rcTengIfOutErrorsFor packet-oriented interfaces, the number of
outbound packets that could not be transmitted because
of errors. For character-oriented or fixed-length
interfaces, the number of outbound transmission units
that could not be transmitted because of errors.ro Counter64 .1.3.6.1.4.1.2272.1.50.1.3.1.20 |
rcTengIfXTableA list of interface entries. The number of entries
is given by the value of ifNumber. This table
contains additional objects for the interface table. SEQUENCE OF RcTengIfXEntry .1.3.6.1.4.1.2272.1.50.1.4 |
rcTengIfXEntryAn entry containing additional management information
applicable to a particular interface. RcTengIfXEntry .1.3.6.1.4.1.2272.1.50.1.4.1 |
rcTengIfXIndexA unique value, greater than zero, for each
interface. It is recommended that values are assigned
contiguously starting from 1. The value for each
interface sub-layer must remain constant at least from
one re-initialization of the entity's network
management system to the next re-initialization.ro InterfaceIndex .1.3.6.1.4.1.2272.1.50.1.4.1.1 |
rcTengIfNameThe textual name of the interface. The value of this
object should be the name of the interface as assigned
by the local device and should be suitable for use in
commands entered at the device's `console'. This
might be a text name, such as `le0' or a simple port
number, such as `1', depending on the interface naming
syntax of the device. If several entries in the
rcTengIfTable together represent a single interface as
named by the device, then each will have the same
value of rcTengIfName. If there is no local name, or
this object is otherwise not applicable, then this
object contains a 0-length string.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2272.1.50.1.4.1.2 |
rcTengIfInMulticastPktsThe number of packets, delivered by this sub-layer to
a higher (sub-)layer, which were addressed to a
multicast address at this sub-layer. For a MAC layer
protocol, this includes both Group and Functional
addresses.ro Counter64 .1.3.6.1.4.1.2272.1.50.1.4.1.3 |
rcTengIfInBroadcastPktsThe number of packets, delivered by this sub-layer to
a higher (sub-)layer, which were addressed to a
broadcast address at this sub-layer.ro Counter64 .1.3.6.1.4.1.2272.1.50.1.4.1.4 |
rcTengIfOutMulticastPktsThe total number of packets that higher-level
protocols requested be transmitted, and which were
addressed to a multicast address at this sub-layer,
including those that were discarded or not sent. For
a MAC layer protocol, this includes both Group and
Functional addresses.ro Counter64 .1.3.6.1.4.1.2272.1.50.1.4.1.5 |
rcTengIfOutBroadcastPktsThe total number of packets that higher-level
protocols requested be transmitted, and which were
addressed to a broadcast address at this sub-layer,
including those that were discarded or not sent.ro Counter64 .1.3.6.1.4.1.2272.1.50.1.4.1.6 |
rcTengIfHCInOctetsThe total number of octets received on the interface,
including framing characters. This object is a 64-bit
version of rcTengIfInOctets.ro Counter64 .1.3.6.1.4.1.2272.1.50.1.4.1.7 |
rcTengIfHCInUcastPktsThe number of packets, delivered by this sub-layer to
a higher (sub-)layer, which were not addressed to a
multicast or broadcast address at this sub-layer.
This object is a 64-bit version of rcTengIfInUcastPkts.ro Counter64 .1.3.6.1.4.1.2272.1.50.1.4.1.8 |
rcTengIfHCInMulticastPktsThe number of packets, delivered by this sub-layer to
a higher (sub-)layer, which were addressed to a
multicast address at this sub-layer. For a MAC layer
protocol, this includes both Group and Functional
addresses. This object is a 64-bit version of
rcTengIfInMulticastPkts.ro Counter64 .1.3.6.1.4.1.2272.1.50.1.4.1.9 |
rcTengIfHCInBroadcastPktsThe number of packets, delivered by this sub-layer to
a higher (sub-)layer, which were addressed to a
broadcast address at this sub-layer. This object is a
64-bit version of IfInBroadcastPkts.ro Counter64 .1.3.6.1.4.1.2272.1.50.1.4.1.10 |
rcTengIfHCOutOctetsThe total number of octets transmitted out of the
interface, including framing characters. This object
is a 64-bit version of rcTengIfOutOctets.ro Counter64 .1.3.6.1.4.1.2272.1.50.1.4.1.11 |
rcTengIfHCOutUcastPktsThe total number of packets that higher-level
protocols requested be transmitted, and which were not
addressed to a multicast or broadcast address at this
sub-layer, including those that were discarded or not
sent. This object is a 64-bit version of
rcTengIfOutUcastPkts.ro Counter64 .1.3.6.1.4.1.2272.1.50.1.4.1.12 |
rcTengIfHCOutMulticastPktsThe total number of packets that higher-level
protocols requested be transmitted, and which were
addressed to a multicast address at this sub-layer,
including those that were discarded or not sent. For
a MAC layer protocol, this includes both Group and
Functional addresses. This object is a 64-bit version
of rcTengIfOutMulticastPkts.ro Counter64 .1.3.6.1.4.1.2272.1.50.1.4.1.13 |
rcTengIfHCOutBroadcastPktsThe total number of packets that higher-level
protocols requested be transmitted, and which were
addressed to a broadcast address at this sub-layer,
including those that were discarded or not sent. This
object is a 64-bit version of rcTengIfOutBroadcastPkts.ro Counter64 .1.3.6.1.4.1.2272.1.50.1.4.1.14 |
rcTengIfLinkUpDownTrapEnableIndicates whether linkUp/linkDown traps should be
generated for this interface.
By default, this object should have the value
enabled(1) for interfaces which do not operate on
'top' of any other interface (as defined in the
rcTengIfStackTable), and disabled(2) otherwise.rw Enumeration .1.3.6.1.4.1.2272.1.50.1.4.1.15 |
rcTengIfHighSpeedAn estimate of the interface's current bandwidth in
units of 1,000,000 bits per second. If this object
reports a value of `n' then the speed of the interface
is somewhere in the range of `n-500,000' to
`n+499,999'. For interfaces which do not vary in
bandwidth or for those where no accurate estimation
can be made, this object should contain the nominal
bandwidth. For a sub-layer which has no concept of
bandwidth, this object should be zero.ro Gauge32 .1.3.6.1.4.1.2272.1.50.1.4.1.16 |
rcTengIfPromiscuousModeThis object has a value of false(2) If this interface
only accepts packets/frames that are addressed to this
station. This object has a value of true(1) when the
station accepts all packets/frames transmitted on the
media. The value true(1) is only legal on certain
types of media. If legal, setting this object to a
value of true(1) may require the interface to be reset
before becoming effective.
The value of rcTengIfPromiscuousMode does not affect the
reception of broadcast and multicast packets/frames by
the interface.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.50.1.4.1.17 |
rcTengIfConnectorPresentThis object has the value 'true(1)' if the interface
sublayer has a physical connector and the value
'false(2)' otherwise.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.50.1.4.1.18 |
rcWisTrap OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.50.2 |
rcWisSonetTrapTypeUsed to indicate a particular type of 10GE Sonet
trap.ro Enumeration .1.3.6.1.4.1.2272.1.50.2.1 |
rcWisSonetTrapIndicationUsed to indicate an indication for a 10GE Sonet trap.ro Enumeration .1.3.6.1.4.1.2272.1.50.2.2 |
rcRec OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.51 |
rcRecReservTableThis table would display the statistics of several HW
record type used. This will also let the user reserve
certain number of records for each type. SEQUENCE OF RcRecReservEntry .1.3.6.1.4.1.2272.1.51.1 |
rcRecReservTablEntry RcRecReservEntry .1.3.6.1.4.1.2272.1.51.1.1 |
rcRecReservRecordType.ro Enumeration .1.3.6.1.4.1.2272.1.51.1.1.1 |
rcRecReservUsedDisplayes the number of HW records actually usee
by the recordType.ro Integer32 .1.3.6.1.4.1.2272.1.51.1.1.2 |
rcRecReservReservedDisplayes the number of HW records reserved for
the recordType.ro Integer32 .1.3.6.1.4.1.2272.1.51.1.1.3 |
rcRecReservNewReservedDisplayes the number of HW records that w ill
be reserved for this recordType after reset if the
configuration is saved.rw Integer32 .1.3.6.1.4.1.2272.1.51.1.1.4 |
rcRecReservDefReservedNumber of records reserved for this recordType
if loaded with factory default.ro Integer32 .1.3.6.1.4.1.2272.1.51.1.1.5 |
rcLacp OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.53 |
rcLacpGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.53.1 |
rcLacpGlobalEnableglobally enable/disable LACPrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.53.1.1 |
rcLacpGlobalSystemPriorityset system priority to all the LACP enabled aggregators
and protsrw Integer32 .1.3.6.1.4.1.2272.1.53.1.2 |
rcLacpGlobalFastPeriodicTimeThe number of miliseconds between periodic transmissions
using Short Timeouts. Set this value to all LACP enabled ports.rw INTEGER .1.3.6.1.4.1.2272.1.53.1.3 |
rcLacpGlobalSlowPeriodicTimeThe number of miliseconds between periodic transmissions
using LONG Timeouts. Set this value to all LACP enabled ports.rw INTEGER .1.3.6.1.4.1.2272.1.53.1.4 |
rcLacpGlobalTimeoutScaleScalar value used to calculate timeout time from
periodic time. Set this value to all LACP enabled ports.rw INTEGER .1.3.6.1.4.1.2272.1.53.1.5 |
rcLacpGlobalAggrWaitTimeThe number of mili seconds to delay aggregation to
allow multiple links to aggregate simultaneously.rw INTEGER .1.3.6.1.4.1.2272.1.53.1.6 |
rcLacpGlobalVlacpEnableglobally enable/disable Virtual LACPrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.53.1.7 |
rcLacpGlobalFastPeriodicTimeOperThe operating value of global fast periodic timer.ro INTEGER .1.3.6.1.4.1.2272.1.53.1.9 |
rcLacpGlobalSlowPeriodicTimeOperThe operating value of global show periodic time.ro INTEGER .1.3.6.1.4.1.2272.1.53.1.10 |
rcLacpGlobalTimeoutScaleOperThe operating value of global timeout scale.ro INTEGER .1.3.6.1.4.1.2272.1.53.1.11 |
rcLacpGlobalAggrWaitTimeOperThe operating value of global aggregate wait time.ro INTEGER .1.3.6.1.4.1.2272.1.53.1.12 |
rcLacpGlobalSmltSysIdLACP system ID for SMLTrw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2272.1.53.1.13 |
rcLicense OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.56 |
rcLicenseNumberBit position number of license bitmapro Enumeration .1.3.6.1.4.1.2272.1.56.1 |
rcLicenseBitMapLicense bit map. Bitmap number is defined in rcLicenseNumberro OCTET STRING .1.3.6.1.4.1.2272.1.56.2 |
rcEap OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.57 |
rcFdb OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.60 |
rcGlobalMacFilterTableA list of Global Mac filter entries. SEQUENCE OF RcGlobalMacFilterEntry .1.3.6.1.4.1.2272.1.60.1 |
rcGlobalMacFilterEntrythis entry is used for global mac filtering.Any Mac
address configured here will be discarded globally
by the switch. RcGlobalMacFilterEntry .1.3.6.1.4.1.2272.1.60.1.1 |
rcGlobalMacFilterAddressA MAC address which will be discarded globally by
the switch MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2272.1.60.1.1.1 |
rcGlobalMacFilterRowStatusUsed to create/delete entries in rcGlobalMacFilterTable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.60.1.1.2 |
rcIpv6 OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.62 |
rcIpv6Mib OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.62.1 |
rcIpv6Notifications OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.62.1.0 |
rcIpv6Objects OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.62.1.1 |
rcIpv6Scalars OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.62.1.1.1 |
rcIpv6IcmpErrorIntervalThe rate (in milliseconds) at which
ICMP error messages can be sent out.
A value of zero means not be send any.rw INTEGER .1.3.6.1.4.1.2272.1.62.1.1.1.1 |
rcIpv6IcmpNetUnreachUsed to set icmp net unreach feature enable/
disable.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.62.1.1.1.3 |
rcIpv6IcmpRedirectMsgUsed to set icmp redirect feature enable/
disable.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.62.1.1.1.4 |
rcIpv6IcmpErrorQuotaThe number of icmp error messages that
can be sent during the icmp error interval.
A value of zero means not be send any.rw INTEGER .1.3.6.1.4.1.2272.1.62.1.1.1.5 |
rcIpv6PrefixListTableSizeSize of Ipv6 Prefix List Tablero Unsigned32 .1.3.6.1.4.1.2272.1.62.1.1.1.8 |
rcIpv6RouteStaticClearClear all IPv6 static routes.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.62.1.1.1.10 |
rcIpv6RouteStaticGlobalAdminEnabledUsed to globally enable/disable all IPv6 static routes.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.62.1.1.1.11 |
rcIpv6InterfaceTableThis table contains list of IPv6 interfaces and
per-interface IPv6-specific information. SEQUENCE OF RcIpv6InterfaceEntry .1.3.6.1.4.1.2272.1.62.1.1.2 |
rcIpv6InterfaceEntryAn entry of ipv6 interface In Table containing
per-interface information. RcIpv6InterfaceEntry .1.3.6.1.4.1.2272.1.62.1.1.2.1 |
rcIpv6InterfaceIfIndexAn unique value to identify a physical interface
or a logical interface (VLAN).
For the brouter port it is the ifindex of the
port and in the case of the vlan it is the
ifindex of the vlan. InterfaceIndex .1.3.6.1.4.1.2272.1.62.1.1.2.1.1 |
rcIpv6InterfaceIdentifierIPv6 address
interface identifiers. This is a binary string
of up to 8 octets in network byte-order.rw Ipv6AddressIfIdentifier (IPV6-TC) .1.3.6.1.4.1.2272.1.62.1.1.2.1.2 |
rcIpv6InterfaceIdentifierLengthThe length of the Interface Identifier in bits.rw INTEGER .1.3.6.1.4.1.2272.1.62.1.1.2.1.3 |
rcIpv6InterfaceDescrA textual string containing information about the
interface. This string may be set by network management system.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2272.1.62.1.1.2.1.4 |
rcIpv6InterfaceVlanIdA value that uniquely identifies the Virtual LAN
associated with this entry. This value corresponds
to the lower 12 bits in the IEEE 802.1Q VLAN Tag.rw RcVlanIdOrNone .1.3.6.1.4.1.2272.1.62.1.1.2.1.5 |
rcIpv6InterfaceTypeThe interface type.ro Enumeration .1.3.6.1.4.1.2272.1.62.1.1.2.1.6 |
rcIpv6InterfaceReasmMaxSizeMTU for this IPv6 interface, this value should
be same for all the ip addresses defined on
this interface.
In VSP9000, Supported range for IO interface,
supported range is(1280..1500 | 1850 | 9500).
For Mgmt interface, Supporyed Range is (1280..1500)rw INTEGER (1280..1500 | 1850 | 9500) .1.3.6.1.4.1.2272.1.62.1.1.2.1.7 |
rcIpv6InterfacePhysAddressThe media-dependent `physical' address, for the
ethernet media it is the MAC addressro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.2272.1.62.1.1.2.1.8 |
rcIpv6InterfaceAdminStatusThe indication of whether IPv6 is enabled (up)
or disabled (down) on this interface. This object does not
affect the state of the interface itself, only its
connection to an IPv6 stack.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.62.1.1.2.1.9 |
rcIpv6InterfaceOperStatusOperating status of the interface.ro Enumeration .1.3.6.1.4.1.2272.1.62.1.1.2.1.10 |
rcIpv6InterfaceReachableTimeThe time (in milliseconds) a neighbor is considered
reachable after receiving a reachability confirmation.
REFERENCE RFC2461, Section 6.3.2rw INTEGER .1.3.6.1.4.1.2272.1.62.1.1.2.1.11 |
rcIpv6InterfaceRetransmitTimeDeprecated. Use rcIpv6InterfaceRetransmitTimer instead.rwdeprecated INTEGER .1.3.6.1.4.1.2272.1.62.1.1.2.1.12 |
rcIpv6InterfaceMulticastAdminStatusThis indicates the admin status for multicast
for this interface.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.62.1.1.2.1.13 |
rcIpv6InterfaceRowStatusRow status for create/delete.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.62.1.1.2.1.14 |
rcIpv6InterfaceDhcpEnabledEnable or disable DHCP on the specified
interface.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.62.1.1.2.1.15 |
rcIpv6InterfaceMacOffsetUsed to request a particular MAC for an IPv6 VLAN.
The system has 1536 mac addresses, last 4 are
reserved for MG.
One can either mention a mac offset while
configuring IPv6 on a vlan or it can be alloted
by the system within the above range.rw INTEGER .1.3.6.1.4.1.2272.1.62.1.1.2.1.16 |
rcIpv6InterfaceRetransmitTimerThe time (in milliseconds) between retransmissions of
Neighbor Solicitation messages to a neighbor when
resolving the address or when probing the reachability
of a neighbor. REFERENCE RFC2461, Section 6.3.2rw Unsigned32 .1.3.6.1.4.1.2272.1.62.1.1.2.1.17 |
rcIpv6InterfaceCurHopLimitThe default value to be placed in the current hop limit
field in router advertisements sent from this interface.
The value should be set to the current diameter of the
Internet.
The default should be set to the value specified in the IANA
web pages (www.iana.org) at the time of implementation.
REFERENCE RFC2461 Section 6.2.1rw Integer32 .1.3.6.1.4.1.2272.1.62.1.1.2.1.18 |
rcIpv6InterfaceClearIcmpStatsClear ICMP statistics for an interfacerw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.62.1.1.2.1.20 |
rcIpv6InterfaceClearGeneralStatsClear general statistics for an interfacerw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.62.1.1.2.1.21 |
rcIpv6InterfaceClearNeighborCacheClear Neighbor Cache for an interfacerw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.62.1.1.2.1.22 |
rcIpv6InterfaceClearDestinationCacheClear Destination Cache for an interfacerw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.62.1.1.2.1.23 |
rcIpv6InterfaceReversePathCheckEnableUsed to indicate whether this interface should
perform Reverse Path Checkrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.62.1.1.2.1.24 |
rcIpv6InterfaceReversePathCheckModeReverse Path Checking mode.rw Enumeration .1.3.6.1.4.1.2272.1.62.1.1.2.1.25 |
rcIpv6InterfaceForwardingEnabledUsed to indicate whether this interface should
perform forwardingrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.62.1.1.2.1.26 |
rcIpv6InterfaceRsmltEnableUsed to indicate whether this interface has
rsmlt enabled or notrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.62.1.1.2.1.27 |
rcIpv6AddressTableThis table contains addressing information relevant
to the entity's interfaces.
This table does not contain multicast address
information. Tables for such information should be
contained in multicast specific MIBs such as RFC3019.
While this table is writable the user will note that several
objects, such as rcIpv6AddressOrigin, are not. The
intention in allowing a user to write to this table is to
allow them to add or remove any entry that isn't permanent.
The user should be allowed to modify objects and entries
when that would not cause inconsistencies within the table.
Allowing write access to objects such as rcIpv6AddressOrigin
could allow a user to insert an entry and then label it
incorrectly. SEQUENCE OF RcIpv6AddressEntry .1.3.6.1.4.1.2272.1.62.1.1.3 |
rcIpv6AddressEntryAn address mapping for a particular interface. Note that
when an address is added to an interface the resulted
prefix is added to that interface. RcIpv6AddressEntry .1.3.6.1.4.1.2272.1.62.1.1.3.1 |
rcIpv6AddressIfIndexThe index value which uniquely identifies the interface to
which this entry is applicable. The interface identified by
a particular value of this index is the same interface as
identified by the same value of the IfIndex field in the
rcIpv6InterfaceIfIndex. InterfaceIndex .1.3.6.1.4.1.2272.1.62.1.1.3.1.1 |
rcIpv6AddressAddrThe IPv6 address to which this entry's addressing
information pertains. This is one of the ipv6 addresses that
this interface(identified by the rcIpv6AddressIfIndex) has.
Implementors need to be aware that if the size of
ipAddressAddr exceeds 116 octets then OIDS of instances of
columns in this row will have more than 128 sub-identifiers
and cannot be accessed using SNMPv1, SNMPv2c or SNMPv3. Ipv6Address (IPV6-TC) .1.3.6.1.4.1.2272.1.62.1.1.3.1.2 |
rcIpv6AddressTypeThe type of address. It is either unicast or anycast
IPv6 addresses (RFC3513).rw Enumeration .1.3.6.1.4.1.2272.1.62.1.1.3.1.3 |
rcIpv6AddressPrefixLengthPrefix Length value for this address. Cannot be changed
after the creation. This field MUST be provided in order
to create an entry in this table.rw INTEGER .1.3.6.1.4.1.2272.1.62.1.1.3.1.4 |
rcIpv6AddressPrefixA pointer to the row in the prefix table to which this
address belongs. May be { 0 0 } if there is no such row.ro RowPointer (SNMPv2-TC) .1.3.6.1.4.1.2272.1.62.1.1.3.1.5 |
rcIpv6AddressOriginThe origin of the address. The origin of the address, one
of: other(1),manual(2), dhcp(4),linklayer(5), random(6)ro IpAddressOriginTC .1.3.6.1.4.1.2272.1.62.1.1.3.1.6 |
rcIpv6AddressStatusThe status of the address, describing if the address can be
used for communication. It will One of: preferred(1),
deprecated(2),invalid(3),inaccessible(4),unknown(5),
tentative(6), duplicate(7)ro IpAddressStatusTC .1.3.6.1.4.1.2272.1.62.1.1.3.1.7 |
rcIpv6AddressCreatedThe value of sysUpTime at the time this entry was
created. If this entry was created prior to the last re-
initialization of the local network management subsystem,
then this object contains a zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.2272.1.62.1.1.3.1.8 |
rcIpv6AddressLastChangedThe value of sysUpTime at the time this entry was last
updated. If this entry was updated prior to the last re-
initialization of the local network management subsystem,
then this object contains a zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.2272.1.62.1.1.3.1.9 |
rcIpv6AddressRowStatusThe status of this conceptual row.
The RowStatus TC requires that this DESCRIPTION clause
states under which circumstances other objects in this row
can be modified. The value of this object has no effect on
whether other objects in this conceptual row can be
modified.
A conceptual row can not be made active until the
rcIpv6AddressIfIndex has been set to a valid index. Only
createAndGo and Delete vlaues are supported.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.62.1.1.3.1.10 |
rcIpv6PrefixTableThis table allows the user to
determine the source of an IP address or set of
IP addresses and allows other tables to
share the information via pointer rather than by copying.
For example when the node configures both a unicast and
anycast address for a prefix the ipAddressPrefix objects for
those addresses will point to a single row in this table.
This table primarily provides support for IPv6 prefixes and
several of the objects are less meaningful for IPv4. The
table continues to allow IPv4 addresses to allow future
flexibility. In order to promote a common configuration
this document includes suggestions for default values for
IPv4 prefixes. Each of these values may be overridden if an
object is meaningful to the node.
All prefixes used by this entity should be included in this
table independent of how the entity learned the prefix.
(This table isn't limited to prefixes learned from router
advertisements.) SEQUENCE OF RcIpv6PrefixEntry .1.3.6.1.4.1.2272.1.62.1.1.4 |
rcIpv6PrefixEntryAn entry of ipv6 prefix In the Table. RcIpv6PrefixEntry .1.3.6.1.4.1.2272.1.62.1.1.4.1 |
rcIpv6PrefixIfIndexAn unique value to identify an ipv6 interface.
For the brouter port it is the ifindex of the
port and in the case of the vlan it is the
ifindex of the vlan. InterfaceIndex .1.3.6.1.4.1.2272.1.62.1.1.4.1.1 |
rcIpv6PrefixAddrPrefix to create an ipv6 address in ipv6 interface
table. Ipv6Address (IPV6-TC) .1.3.6.1.4.1.2272.1.62.1.1.4.1.2 |
rcIpv6PrefixLengthMask to create an ipv6 prefix entry
either will be advertised or suppressed INTEGER .1.3.6.1.4.1.2272.1.62.1.1.4.1.3 |
rcIpv6PrefixVlanIdA value that uniquely identifies the Virtual LAN
associated with this entry. This value corresponds
to the lower 12 bits in the IEEE 802.1Q VLAN Tag.ro RcVlanIdOrNone .1.3.6.1.4.1.2272.1.62.1.1.4.1.4 |
rcIpv6PrefixUseDefaultValSelect one of the value to set/use it's value
to default value. This is a bitmask field,
setting all the bits means that all the options
will be reverted to default values.rw Enumeration .1.3.6.1.4.1.2272.1.62.1.1.4.1.5 |
rcIpv6PrefixAtValidLifeIs the date and time, upon reaching this
value the prefix will be expired,
if configured this option will
be included in the neighbor advertisement
for this prefix.rw DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2272.1.62.1.1.4.1.8 |
rcIpv6PrefixAtPreferredLifeIs the date and time, upon reaching this
value the prefix will be expired,
if configured this option will be
included in the neighbor advertisement
for this prefix.rw DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2272.1.62.1.1.4.1.9 |
rcIpv6PrefixInfiniteif set the prefix's valid lifetime will
not exprie.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.62.1.1.4.1.10 |
rcIpv6PrefixOnLinkFlagif set then this prefix can be used
for onlink determination. This value
be placed in the L-bit field in the prefix
information option. It is a 1 bit flag.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.62.1.1.4.1.11 |
rcIpv6PrefixAutoFlagif set then this prefix can be used
for autonomous address config. This value
be placed in the auto-flag field in the prefix
information option. It is a 1 bit flag.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.62.1.1.4.1.12 |
rcIpv6PrefixAddressEuiUse an EUI-64 interface ID in the low-order
64bits of the address when not specified in the address field.
If enabled use EUI, otherwise use EUI-64 and complement U/L
(Universal/Local bit). This operation should
be allowed for both global and link local
addresses. Once the entry is create cannot modify this field.
This will be valid to use only when the PrefixLength is 64 or lessrw Enumeration .1.3.6.1.4.1.2272.1.62.1.1.4.1.13 |
rcIpv6PrefixNoAdvertiseif set then this prefix can not be included
in the neighbor advertisement.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.62.1.1.4.1.14 |
rcIpv6PrefixRowStatusRow status for create/delete.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.62.1.1.4.1.15 |
rcIpv6PrefixValidLifetimeValid lifetime in seconds, indicates
how long this prefix advertised in
the nbr advertisement is valid.
Value of 4294967295 represents infinity.rw Unsigned32 .1.3.6.1.4.1.2272.1.62.1.1.4.1.16 |
rcIpv6PrefixPreferredLifetimePreferred lifetime in seconds, indicates
how long this prefix advertised in
advertisemt for this prefix.
Value of 4294967295 represents infinity.rw Unsigned32 .1.3.6.1.4.1.2272.1.62.1.1.4.1.17 |
rcIpv6RouterAdvertTableThe table containing information
used to construct router advertisements. SEQUENCE OF RcIpv6RouterAdvertEntry .1.3.6.1.4.1.2272.1.62.1.1.5 |
rcIpv6RouterAdvertEntryAn entry containing information used to construct
router advertisements. RcIpv6RouterAdvertEntry .1.3.6.1.4.1.2272.1.62.1.1.5.1 |
rcIpv6RouterAdvertIfIndexAn unique value to identify an ipv6 interface.
For the brouter port it is the ifindex of the
port and in the case of the vlan it is the
ifindex of the vlan. InterfaceIndex .1.3.6.1.4.1.2272.1.62.1.1.5.1.1 |
rcIpv6RouterAdvertSendAdvertsA flag indicating whether or not the router sends periodic
router advertisements and responds to router solicitations
on this interface. REFERENCE RFC2461 Section 6.2.1rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.62.1.1.5.1.2 |
rcIpv6RouterAdvertUseDefaultValSelect one of the value to set/use it's
value to default value, or set all the bits
to indicate all the options will be set to
their default value.rw Enumeration .1.3.6.1.4.1.2272.1.62.1.1.5.1.3 |
rcIpv6RouterAdvertMaxIntervalConfigure the max interval (in seconds)
at which the transmission of route
advertisments can occur on this interface.
This must be no less than 4 seconds and
no greater than 1800.rw INTEGER .1.3.6.1.4.1.2272.1.62.1.1.5.1.4 |
rcIpv6RouterAdvertMinIntervalConfigure the min interval (in seconds)
at which the transmission of route
advertisments can occur on this interface.
This must be no less than 3 seconds and
no greater than .75* max-interval.rw INTEGER .1.3.6.1.4.1.2272.1.62.1.1.5.1.5 |
rcIpv6RouterAdvertReachableTimeThe value (in milliseconds) to be placed in the router advertisement message
sent by the router. The value zero means
unspecified (by this router). Used to
configure the amount of time that a remote
IPv6 node is considered reachable after
some reachability confirmation event has
occured.
REFERENCE RFC2461 Section 6.2.1rw INTEGER .1.3.6.1.4.1.2272.1.62.1.1.5.1.6 |
rcIpv6RouterAdvertRetransmitTimerThe value (in milliseconds) to be placed in the retransmit timer field in router
advertisement message sent from this
interface. The value zero means
unspecified (by this router). Used to
configure the amount of time that router
should wait for the transmit to occur.
REFERENCE RFC2461 Section 6.2.1
Deprecated by rcIpv6RouterAdvertRetransmitTimerodeprecated INTEGER .1.3.6.1.4.1.2272.1.62.1.1.5.1.7 |
rcIpv6RouterAdvertDefaultLifeTimeThe value to be placed in the router lifetime field of
router advertisements sent from this interface. This value
MUST be either 0 or between rcIpv6RouterAdvertMaxInterval and
9000 seconds.
A value of zero indicates that the router is not to be used
as a default router.
The default is 3 * rcIpv6RouterAdvertMaxInterval.
REFERENCE RFC2461 Section 6.2.1rw INTEGER (0|4..9000) .1.3.6.1.4.1.2272.1.62.1.1.5.1.8 |
rcIpv6RouterAdvertCurHopLimitThe default value to be placed in the current hop limit
field in router advertisements sent from this interface.
The value should be set to the current diameter of the
Internet.
A value of zero in the router advertisement indicates that
the advertisement isn't specifying a value for curHopLimit.
The default should be set to the value specified in the IANA
web pages (www.iana.org) at the time of implementation.
REFERENCE RFC2461 Section 6.2.1rw INTEGER .1.3.6.1.4.1.2272.1.62.1.1.5.1.9 |
rcIpv6RouterAdvertManagedFlagif true then the M-bit(Managed address
configureation) in the router
adverisement will be set.
REFERENCE RFC2461 Section 6.2.1rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.62.1.1.5.1.10 |
rcIpv6RouterAdvertOtherConfigFlagif true then the O-bit (Other stateful
Configuration) in the router
adverisement will be set. REFERENCE
RFC2461 Section 6.2.1rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.62.1.1.5.1.11 |
rcIpv6RouterAdvertDadNsNumThe number of neighbor solicitation
messages for DAD (Duplicate address
detection). A value 0 is used to disable
DAD process on this interface. A value 1
is used to send one advertisment without
any retransmissions.rw INTEGER .1.3.6.1.4.1.2272.1.62.1.1.5.1.12 |
rcIpv6RouterAdvertLinkMTUThe value to be placed in MTU options sent by the
router on this interface. A value of zero
indicates that no MTU options are sent. REFERENCE
RFC2461 Section 6.2.1rw Unsigned32 (0 | 1280..1500 | 1850 | 9500) .1.3.6.1.4.1.2272.1.62.1.1.5.1.13 |
rcIpv6RouterAdvertRetransmitTimeThe value (in milliseconds) to be placed in the retransmit timer field in router
advertisement message sent from this
interface. The value zero means
unspecified (by this router). Used to
configure the amount of time that router
should wait for the transmit to occur.
REFERENCE RFC2461 Section 6.2.1.
Use this object to replace
rcIpv6RouterAdvertRetransmitTimerrw Unsigned32 .1.3.6.1.4.1.2272.1.62.1.1.5.1.14 |
rcIpv6StaticRouteTableThis table contains list of routes that are
created by the user to destination networks. SEQUENCE OF RcIpv6StaticRouteEntry .1.3.6.1.4.1.2272.1.62.1.1.6 |
rcIpv6StaticRouteEntryAn entry in the static route table for IPv6
can be created for a destination with a specific
prefix length; multiple entries to the same
destination are created either by specifying the
next-hop or interfaceIndex or both to reach the destination.
However if the nexthop Ipv6 address is a link-local
address then IfIndex must be supplied. RcIpv6StaticRouteEntry .1.3.6.1.4.1.2272.1.62.1.1.6.1 |
rcIpv6StaticRouteDestThe destination IPv6 address of this route.
The values for the index objects rcIpv6StaticRouteDest and
rcIpv6StaticRoutePrefixLength must be consistent. When
the value of rcIpv6StaticRouteDest (excluding the zone
index, if one is present) is x, then the bitwise
logical-AND of x with the value of the mask formed from
the corresponding index object
rcIpv6StaticRoutePrefixLength MUST be equal to x. If
not, then the index pair is not consistent and an
inconsistentName error must be returned on SET or
CREATE requests. Ipv6Address (IPV6-TC) .1.3.6.1.4.1.2272.1.62.1.1.6.1.1 |
rcIpv6StaticRoutePrefixLengthIndicates the number of leading one bits which
form the mask to be logical-ANDed with the destination
address before being compared to the value in the
rcIpv6StaticRouteDestAddr field. INTEGER .1.3.6.1.4.1.2272.1.62.1.1.6.1.2 |
rcIpv6StaticRouteNextHopNext hop IPv6 address for this destination.
On remote routes, the address of the next system en
route. For non-remote routes, a zero length string. Ipv6Address (IPV6-TC) .1.3.6.1.4.1.2272.1.62.1.1.6.1.3 |
rcIpv6StaticRouteIfIndexThe ifIndex value which identifies the local
interface through which the next hop of this route
should be reached. A value of 0 is valid and
represents the scenario where no interface is specified. InterfaceIndex .1.3.6.1.4.1.2272.1.62.1.1.6.1.4 |
rcIpv6StaticRouteDistancecost/distance to reach the destination for this
node.rw INTEGER (1..65535 ) .1.3.6.1.4.1.2272.1.62.1.1.6.1.5 |
rcIpv6StaticRouteStatus(1)notReachable means the route is not reachable and no
neighbor request entry is built to resolved the next-hop.
It happens when there is no route or neighbor to reach
the static route's next-hop.
(2)tryToResolve means the route is not reachable but a
neighbor request entry is built to resolved the next-hop.
It happens when there is a local equivelent route in system to
reach the next-hop but the neighor is not learnt yet
(3)reachableNotInRtm means the static route is
reachable but it is not in RTM. It happens when the static
route is reachable, but it is not the best among alternative
static route.
(4)reachableInRtm means the static route is reachable
and it is in RTM. It happens when the static
route is reachable, and it is the best among alternative
static route to be added into RTM.ro Enumeration .1.3.6.1.4.1.2272.1.62.1.1.6.1.6 |
rcIpv6StaticRoutePreferenceUsed to indicate the route preference of this
entry. If there are more than one route that can
be used to forward IP traffic, the route that has
a highest preference will be used instead of a
lower preference one. The higher the number,
the higher the preference.rw INTEGER .1.3.6.1.4.1.2272.1.62.1.1.6.1.7 |
rcIpv6StaticRouteEnableUsed to enable/disable this entry.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.62.1.1.6.1.8 |
rcIpv6StaticRouteRowStatusRow status for create/delete.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.62.1.1.6.1.9 |
rcIpv6NetToPhysicalTableThe IP Address Translation table used for mapping from IP
addresses to physical addresses.
The Address Translation tables contain the IP address to
'physical' address equivalences. Some interfaces do not use
translation tables for determining address equivalences
(e.g., DDN-X.25 has an algorithmic method); if all
interfaces are of this type, then the Address Translation
table is empty, i.e., has zero entries.
While many protocols may be used to populate this table, ARP
[10] and Neighbor Discovery [4] are the most likely
options. SEQUENCE OF RcIpv6NetToPhysicalEntry .1.3.6.1.4.1.2272.1.62.1.1.7 |
rcIpv6NetToPhysicalEntryEach entry contains one IP address to `physical' address
equivalence. RcIpv6NetToPhysicalEntry .1.3.6.1.4.1.2272.1.62.1.1.7.1 |
rcIpv6NetToPhysicalIfIndexThe index value which uniquely identifies the interface to
which this entry is applicable. The interface identified by
a particular value of this index is the same interface as
identified by the same value of the IfIndex field in the
rcIpv6InterfaceIfIndex. InterfaceIndex .1.3.6.1.4.1.2272.1.62.1.1.7.1.1 |
rcIpv6NetToPhysicalNetAddressThe IP Address corresponding to the media-dependent
`physical' address. The address type of this object is
specified in rcIpv6NetToPhysicalAddressType.
Implementors need to be aware that if the size of
rcIpv6NetToPhysicalNetAddress exceeds 115 octets then OIDS of
instances of columns in this row will have more than 128
sub-identifiers and cannot be accessed using SNMPv1, SNMPv2c
or SNMPv3. Ipv6Address (IPV6-TC) .1.3.6.1.4.1.2272.1.62.1.1.7.1.2 |
rcIpv6NetToPhysicalPhysAddressThe media-dependent `physical' address.
As the entries in this table are typically not persistent
when this object is written the entity SHOULD NOT save the
change to non-volatile storage. In the ethernet case
it is a MAC address.rw PhysAddress .1.3.6.1.4.1.2272.1.62.1.1.7.1.3 |
rcIpv6NetToPhysicalInterfaceThe field represents either a physical port id or the MLT
port id. This entry is associated either with
a port or with a MLT in a VLAN/Brouter port. If the value is
0 then the interface is CP port.rw Integer32 .1.3.6.1.4.1.2272.1.62.1.1.7.1.4 |
rcIpv6NetToPhysicalLastUpdatedThe value of sysUpTime at the time this entry was last
updated. If this entry was updated prior to the last re-
initialization of the local network management subsystem,
then this object contains a zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.2272.1.62.1.1.7.1.5 |
rcIpv6NetToPhysicalTypeThe type of mapping.
The 'dynamic(2)' type indicates that the IP address to
physical addresses mapping has been dynamically resolved
using e.g. IPv4 ARP or the IPv6 Neighbor Discovery protocol.
The 'static(3)' type indicates that the mapping has been
statically configured. Both of these refer to entries that
provide mappings for other entities addresses.
The 'local(4)' type indicates that the mapping is provided
for an entity's own interface address.
As the entries in this table are typically not persistent
when this object is written the entity SHOULD NOT save the
change to non-volatile storage.rw Enumeration .1.3.6.1.4.1.2272.1.62.1.1.7.1.6 |
rcIpv6NetToPhysicalStateThe Neighbor Unreachability Detection [4] state for the
interface when the address mapping in this entry is used.
If Neighbor Unreachability Detection is not in use (eg. for
IPv4), this object is always unknown(6).
REFERENCE RFC2461ro Enumeration .1.3.6.1.4.1.2272.1.62.1.1.7.1.8 |
rcIpv6NetToPhysicalRowStatusThe status of this conceptual row.
The RowStatus TC requires that this DESCRIPTION clause
states under which circumstances other objects in this row
can be modified. The value of this object has no effect on
whether other objects in this conceptual row can be
modified.
A conceptual row can not be made active until the
rcIpv6NetToPhysicalPhysAddress object has been set.
Note that if the rcIpv6NetToPhysicalType is set to
'invalid' the
managed node may delete the entry independent of the state
of this object. Only createandGo and Delete operations are
supportedrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.62.1.1.7.1.9 |
rcIpv6PrefixListTableIPv6 Prefix List table SEQUENCE OF RcIpv6PrefixListEntry .1.3.6.1.4.1.2272.1.62.1.1.8 |
rcIpv6PrefixListEntryAn entry of Ipv6 Prefix List Table. RcIpv6PrefixListEntry .1.3.6.1.4.1.2272.1.62.1.1.8.1 |
rcIpv6PrefixListIdId of an IPv6 Prefix List Unsigned32 .1.3.6.1.4.1.2272.1.62.1.1.8.1.1 |
rcIpv6PrefixListPrefixIs a member of a specific ipv6 prefix list.
Adding the prefix to the given ipv6 prefix list Ipv6Address (IPV6-TC) .1.3.6.1.4.1.2272.1.62.1.1.8.1.2 |
rcIpv6PrefixListPrefixMaskLenMask length of the ipv6 prefix added to the prefix list Unsigned32 .1.3.6.1.4.1.2272.1.62.1.1.8.1.3 |
rcIpv6PrefixListMaskLenFromLower bound of mask length of the ipv6 prefix added to
the prefix listrw Unsigned32 .1.3.6.1.4.1.2272.1.62.1.1.8.1.4 |
rcIpv6PrefixListMaskLenUptoHigher bound of mask length of the ipv6 prefix added to
the prefix listrw Unsigned32 .1.3.6.1.4.1.2272.1.62.1.1.8.1.5 |
rcIpv6PrefixListNameName of the Ipv6 prefix listrw SnmpAdminString .1.3.6.1.4.1.2272.1.62.1.1.8.1.6 |
rcIpv6PrefixListRowStatusUsed to create/delete entries in the ipv6 prefix list
tablerw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.62.1.1.8.1.7 |
rcIpv6ConfDhcpRelayTableDHCP Relay for Ipv6 configuration table SEQUENCE OF RcIpv6ConfDhcpRelayEntry .1.3.6.1.4.1.2272.1.62.1.1.9 |
rcIpv6ConfDhcpRelayEntryUsed to configure DHCP on a particular L3 interface. An
entry is created automatically when the variable
rcIpv6InterfaceDhcpEnabled is set to TRUE.
Once created this entry will only be deleted if the
rcIpv6ConfDhcpRowStatus is set to 'destroy(6)'. In
which case, the rcIpv6InterfaceDhcpEnabled is automatically
reset to the FALSE setting. RcIpv6ConfDhcpRelayEntry .1.3.6.1.4.1.2272.1.62.1.1.9.1 |
rcIpv6ConfDhcpIfIndexInterface number. The number can represent either
a physical or logical(VLAN) interface. InterfaceIndex .1.3.6.1.4.1.2272.1.62.1.1.9.1.1 |
rcIpv6ConfDhcpMaxHopUsed to indicate the maximum number of hops a
DHCP packet can take from the source device to
the destination device (i.e., DHCP client to
DHCP server).rw Unsigned32 .1.3.6.1.4.1.2272.1.62.1.1.9.1.2 |
rcIpv6ConfDhcpRemoteIdEnabledUsed to indicate if remote-id option is enabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.62.1.1.9.1.3 |
rcIpv6ConfDhcpNumRequestsThe total number of DHCP requests seen on this interface.ro Counter32 .1.3.6.1.4.1.2272.1.62.1.1.9.1.4 |
rcIpv6ConfDhcpNumRepliesThe total number of DHCP replies seen on this interface.ro Counter32 .1.3.6.1.4.1.2272.1.62.1.1.9.1.5 |
rcIpv6ConfDhcpRowStatusAn entry is created automatically when the variable
rcIpv6InterfaceDhcpEnabled is set to TRUE.
Once created this entry will only be deleted if the
rcIpv6ConfDhcpRowStatus is set to 'destroy(6)'. In
which case, the rcIpv6InterfaceDhcpEnabled is automatically
reset to the FALSE setting.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.62.1.1.9.1.6 |
rcIpv6DhcpForwardTableDHCP Relay forwarding table. SEQUENCE OF RcIpv6DhcpForwardEntry .1.3.6.1.4.1.2272.1.62.1.1.10 |
rcIpv6DhcpForwardEntryAn entry used represents a DHCP Relayed message forwarding directive. RcIpv6DhcpForwardEntry .1.3.6.1.4.1.2272.1.62.1.1.10.1 |
rcIpv6DhcpForwardAgentAddrThe IP address configured on an interface
(i.e., a locally configured IP address). Ipv6Address (IPV6-TC) .1.3.6.1.4.1.2272.1.62.1.1.10.1.1 |
rcIpv6DhcpForwardServerAddrThe IP address of the DHCP server. If this
IP address corresponds to a local interface address, the DHCP packet is multicast out
the interface the IP address is assigned to.otherwise,the DHCP packet is sent via unicast to the remote device. Ipv6Address (IPV6-TC) .1.3.6.1.4.1.2272.1.62.1.1.10.1.2 |
rcIpv6DhcpForwardEnabledUsed to indicate whether the entry should be used.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.62.1.1.10.1.3 |
rcIpv6DhcpForwardRowStatusRow status of this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.62.1.1.10.1.4 |
rcIpv6MgmtPortStaticRouteTableThis table contains list of routes that are
created by the user to destination networks
on the management port. SEQUENCE OF RcIpv6MgmtPortStaticRouteEntry .1.3.6.1.4.1.2272.1.62.1.1.12 |
rcIpv6MgmtPortStaticRouteEntryAn entry in the static route table for IPv6
can be created for a destination with a specific
prefix length; multiple entries to the same
destination are created either by specifying the
next-hop or interfaceIndex or both to reach the destination.
However if the nexthop Ipv6 address is a link-local
address then IfIndex must be supplied. RcIpv6MgmtPortStaticRouteEntry .1.3.6.1.4.1.2272.1.62.1.1.12.1 |
rcIpv6MgmtPortStaticRouteIfIndexThe ifIndex value which identifies the local
interface through which the next hop of this route
should be reached. A value of 0 is valid and
represents the scenario where no interface is specified. InterfaceIndex .1.3.6.1.4.1.2272.1.62.1.1.12.1.1 |
rcIpv6MgmtPortStaticRouteDestThe destination IPv6 address of this route.
The values for the index objects rcIpv6StaticRouteDest and
rcIpv6StaticRoutePrefixLength must be consistent. When
the value of rcIpv6StaticRouteDest (excluding the zone
index, if one is present) is x, then the bitwise
logical-AND of x with the value of the mask formed from
the corresponding index object
rcIpv6StaticRoutePrefixLength MUST be equal to x. If
not, then the index pair is not consistent and an
inconsistentName error must be returned on SET or
CREATE requests. Ipv6Address (IPV6-TC) .1.3.6.1.4.1.2272.1.62.1.1.12.1.2 |
rcIpv6MgmtPortStaticRoutePrefixLengthIndicates the number of leading one bits which
form the mask to be logical-ANDed with the destination
address before being compared to the value in the
rcIpv6MgmtPortStaticRouteDestAddr field. INTEGER .1.3.6.1.4.1.2272.1.62.1.1.12.1.3 |
rcIpv6MgmtPortStaticRouteNextHopNext hop IPv6 address for this destination.
On remote routes, the address of the next system en
route. For non-remote routes, a zero length string. Ipv6Address (IPV6-TC) .1.3.6.1.4.1.2272.1.62.1.1.12.1.4 |
rcIpv6MgmtPortStaticRouteDistancecost/distance to reach the destination for this
node.rw INTEGER (1..65535 ) .1.3.6.1.4.1.2272.1.62.1.1.12.1.5 |
rcIpv6MgmtPortStaticRouteStatus(1)notReachable means the route is not reachable and no
neighbor request entry is built to resolved the next-hop.
It happens when there is no route or neighbor to reach
the static route's next-hop.
(2)tryToResolve means the route is not reachable but a
neighbor request entry is built to resolved the next-hop.
It happens when there is a local equivelent route in system to
reach the next-hop but the neighor is not learnt yet
(3)reachableNotInRtm means the static route is
reachable but it is not in RTM. It happens when the static
route is reachable, but it is not the best among alternative
static route.
(4)reachableInRtm means the static route is reachable
and it is in RTM. It happens when the static
route is reachable, and it is the best among alternative
static route to be added into RTM.ro Enumeration .1.3.6.1.4.1.2272.1.62.1.1.12.1.6 |
rcIpv6MgmtPortStaticRoutePreferenceUsed to indicate the route preference of this
entry. If there are more than one route that can
be used to forward IP traffic, the route that has
a highest preference will be used instead of a
lower preference one. The higher the number,
the higher the preference.rw INTEGER .1.3.6.1.4.1.2272.1.62.1.1.12.1.7 |
rcIpv6MgmtPortStaticRouteEnableUsed to enable/disable this entry.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.62.1.1.12.1.8 |
rcIpv6MgmtPortStaticRouteRowStatusRow status for create/delete.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.62.1.1.12.1.9 |
rcIpv6DestinationCacheTableIpv6 Destination Cache table SEQUENCE OF RcIpv6DestinationCacheEntry .1.3.6.1.4.1.2272.1.62.1.1.13 |
rcIpv6DestinationCacheEntryUsed to display Destination Cache RcIpv6DestinationCacheEntry .1.3.6.1.4.1.2272.1.62.1.1.13.1 |
rcIpv6DCacheDestAddrIPv6 Destination Address from the
Destination Cache. Ipv6Address (IPV6-TC) .1.3.6.1.4.1.2272.1.62.1.1.13.1.1 |
rcIpv6DCacheIfIndexThe last 16 bits of this object's value are interpreted as InterfaceIndex
(it can represent either a physical, or a VLAN, or a tunnel interface);
the first 16 bits are ignored when the object's value is interpreted. Unsigned32 .1.3.6.1.4.1.2272.1.62.1.1.13.1.2 |
rcIpv6DCacheNextHopIpv6 Next Hop for a Destination Cache entry.ro Ipv6Address (IPV6-TC) .1.3.6.1.4.1.2272.1.62.1.1.13.1.3 |
rcIpv6DCacheIfTypeInterface type; it can be a real (i.e. VLAN, brouter, tunnel)
or a virtual circuit (i.e. VRRP, RSMLT).ro Enumeration .1.3.6.1.4.1.2272.1.62.1.1.13.1.4 |
rcIpv6DCacheIfDataUsed to display additional information about virtual
circuits (i.e. if it is a VRRP or RSMLT circuit, the vrId
if it is a VRRP circuit); no information is displayed for
real circuits.ro DisplayString .1.3.6.1.4.1.2272.1.62.1.1.13.1.5 |
rcIpv6DCachePmtuPath MTU for the entry.ro Integer32 .1.3.6.1.4.1.2272.1.62.1.1.13.1.6 |
rcIpv6DCachePmtuAgeIndicates how much time (in seconds) has passed since the PMTU
was updated the last time.ro Counter32 .1.3.6.1.4.1.2272.1.62.1.1.13.1.7 |
rcIsis OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.63 |
rcIsisGlobalGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.63.1 |
rcIsisGlobalAreaAuthTypeThe authentication type for the arearw Enumeration .1.3.6.1.4.1.2272.1.63.1.1 |
rcIsisGlobalAreaKeyIdAuthentication key-id for the area. This is
required if the auth-type is hmac-md5 else it is
not required.rw Integer32 .1.3.6.1.4.1.2272.1.63.1.2 |
rcIsisGlobalAreaAuthKeyAuthentication key, this key will be used to
authenticate the LSP's received on the arearw OCTET STRING .1.3.6.1.4.1.2272.1.63.1.3 |
rcIsisGlobalDomainAuthTypeThe authentication type for the domainrw Enumeration .1.3.6.1.4.1.2272.1.63.1.4 |
rcIsisGlobalDomainKeyIdThe authentication key-id for the domain. This is
required if the auth-type is hmac-md5 else it is
not required.rw Integer32 .1.3.6.1.4.1.2272.1.63.1.5 |
rcIsisGlobalDomainAuthKeyAuthentication key, this key will be used to
authenticate the LSP's received on the domainrw OCTET STRING .1.3.6.1.4.1.2272.1.63.1.6 |
rcIsisGlobalCsnpIntInterval of time, in seconds, between periodic
transmission of a complete set of CSNPs on
multiaccess networks if this router is the
designated router at this level.
This object follows the resettingTimer behavior.
For ResettingTimer description see the ISIS MIBrw Integer32 .1.3.6.1.4.1.2272.1.63.1.7 |
rcIsisGlobalRxmtLspIntMinimum interval, in seconds, between
re-transmission of a LSP at this level. This
object follows the resettingTimer behavior.
For ResettingTimer description see the ISIS MIBrw Integer32 .1.3.6.1.4.1.2272.1.63.1.8 |
rcIsisGlobalPSNPIntervalMinimum interval in seconds between sending Partial
Sequence Number PDUs at this level. This object
follows the resettingTimer behavior.
For ResettingTimer description see the ISIS MIBrw Integer32 .1.3.6.1.4.1.2272.1.63.1.9 |
rcIsisGlobalHostNameThe hostname listed in LSP, or the system name if host
name is not configured.rw OCTET STRING .1.3.6.1.4.1.2272.1.63.1.10 |
rcIsisGlobalSpfDelayISIS SPF delay in milisecondsrw Integer32 .1.3.6.1.4.1.2272.1.63.1.11 |
rcIsisGlobalControlVlanISIS control vlan IDrw Integer32 .1.3.6.1.4.1.2272.1.63.1.12 |
rcIsisGlobalIpSourceAddressISIS PLSB IP address. Define an existing router interface
for management (ping/traceroute)rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2272.1.63.1.13 |
rcIsisGlobalIpSourceAddressTypeThe type of address for existing router interface
for management (ping/traceroute)rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2272.1.63.1.14 |
rcIsisCircuitTableTable of IS-IS Circuit, this is extension
to the isisCircTable defined in ISIS MIB SEQUENCE OF RcIsisCircuitEntry .1.3.6.1.4.1.2272.1.63.2 |
rcIsisCircuitEntryAn entry of rcIsisCircuit Table. A Entry in
table exists for each ISIS circuit created RcIsisCircuitEntry .1.3.6.1.4.1.2272.1.63.2.1 |
rcIsisCircuitIndexThe identifier of this circuit, unique within the
Intermediate System. This object follows
the index behavior. This is for SNMP Indexing
purposes only and need not have any relation to
any protocol value. Integer32 .1.3.6.1.4.1.2272.1.63.2.1.1 |
rcIsisCircuitTypeISIS circuit type this is an extention to
ISIS circuit table, this was required a
standard MIB circuit type does not support
passive typerw Enumeration .1.3.6.1.4.1.2272.1.63.2.1.2 |
rcIsisCircuitAuthTypeAuthentication type for IIH to be sent/reveived
on the circuit/interfacerw Enumeration .1.3.6.1.4.1.2272.1.63.2.1.3 |
rcIsisCircuitKeyIdAuthentication key id related to IIH key
This can be set only if the auth-type is hmac-md5rw INTEGER .1.3.6.1.4.1.2272.1.63.2.1.4 |
rcIsisCircuitAuthKeyAuthentication key to be used to authenticate
IIH sent/reveived on the circuit/interfacerw OCTET STRING .1.3.6.1.4.1.2272.1.63.2.1.5 |
rcIsisCircuitAddrIP address associated with the interfacero IpAddress .1.3.6.1.4.1.2272.1.63.2.1.6 |
rcIsisCircuitMaskIP mask associated with the interfacero IpAddress .1.3.6.1.4.1.2272.1.63.2.1.7 |
rcIsisCircuitOperStateThis variable tells the operating state of circro Enumeration .1.3.6.1.4.1.2272.1.63.2.1.8 |
rcIsisCircuitNumAdjNUmber of adjacenciesro Integer32 .1.3.6.1.4.1.2272.1.63.2.1.9 |
rcIsisCircuitNumUpAdjNumber of adjancencies which are UPro Integer32 .1.3.6.1.4.1.2272.1.63.2.1.10 |
rcIsisStats OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.63.3 |
rcIsisStatsClearErrorCountersClear ISIS global and interface error counters.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.63.3.1 |
rcIsisStatsClearPacketCountersClear IS-IS control packets sent and received
at each level on all the interface/circuits.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.63.3.2 |
rcIsisPlsbTableTable of PLSB under IS-IS SEQUENCE OF RcIsisPlsbEntry .1.3.6.1.4.1.2272.1.63.4 |
rcIsisPlsbEntryAn entry of rcIsisPlsb Table. A Entry in
table exists for each plsb instance created RcIsisPlsbEntry .1.3.6.1.4.1.2272.1.63.4.1 |
rcIsisPlsbIdPLSB instance ID Integer32 .1.3.6.1.4.1.2272.1.63.4.1.1 |
rcIsisPlsbRowStatusThe state of the rcIsisPlsbEntry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.63.4.1.2 |
rcIsisPlsbNodeNickNamePLSB node's nickname is used to
calculate ISID multicast mac address.rw IsisPlsbNodeNickName .1.3.6.1.4.1.2272.1.63.4.1.3 |
rcIsisPlsbVlansPLSB ISIS vlans for a PLSB instance.rw OCTET STRING .1.3.6.1.4.1.2272.1.63.4.1.4 |
rcIsisPlsbLsdbTrapisis PLSB lsdb update trap enable on this plsb instancerw EnableValue .1.3.6.1.4.1.2272.1.63.4.1.5 |
rcIsisPlsbStateenable/disable PLSB.rw EnableValue .1.3.6.1.4.1.2272.1.63.4.1.6 |
rcIsisPlsbIpShortcutISIS PLSB IP shortcut enabledrw EnableValue .1.3.6.1.4.1.2272.1.63.4.1.7 |
rcIsisPlsbPrimaryVlanPrimary Vlan Id for this plsb instance.rw Integer32 .1.3.6.1.4.1.2272.1.63.4.1.8 |
rcIsisPlsbSmltSplitBEBISIS PLSB SMLT split BEB for this plsb instance.ro Enumeration .1.3.6.1.4.1.2272.1.63.4.1.9 |
rcIsisPlsbSmltBmacISIS PLSB SMLT virtual MAC for this plsb instance.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2272.1.63.4.1.10 |
rcIsisPlsbSmltPeerSysIdISIS PLSB SMLT Peer's system-id for this plsb instance.rw IsisSystemID .1.3.6.1.4.1.2272.1.63.4.1.11 |
rcIsisCircuitPlsbTableTable of IS-IS Circuit PLSB instance SEQUENCE OF RcIsisCircuitPlsbEntry .1.3.6.1.4.1.2272.1.63.5 |
rcIsisCircuitPlsbEntryAn entry of rcIsisCircuitPlsb Table. A Entry in
table exists for each PLSB instance under a ISIS
circuit created RcIsisCircuitPlsbEntry .1.3.6.1.4.1.2272.1.63.5.1 |
rcIsisCircuitPlsbIndexThe identifier of this circuit, unique within the
Intermediate System. This object follows
the index behavior. This is for SNMP Indexing
purposes only and need not have any relation to
any protocol value. Integer32 .1.3.6.1.4.1.2272.1.63.5.1.1 |
rcIsisCircuitPlsbIdPLSB instance ID Integer32 .1.3.6.1.4.1.2272.1.63.5.1.2 |
rcIsisCircuitPlsbRowStatusThe state of the rcIsisCircuitPlsbEntry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.63.5.1.3 |
rcIsisCircuitPlsbStatePLSB functionality enable on this Plsb
instance at this portrw EnableValue .1.3.6.1.4.1.2272.1.63.5.1.4 |
rcIsisCircuitPlsbTypeISIS circuit type this is an extention to
ISIS circuit table, this was required a
standard MIB circuit type does not support
passive typerw Enumeration .1.3.6.1.4.1.2272.1.63.5.1.5 |
rcIsisCircuitPlsbL1MetricThe metric value of this circuit for this level.rw IsisDefaultL1Metric .1.3.6.1.4.1.2272.1.63.5.1.6 |
rcIsisCircuitPlsbWideL1MetricThe metric value of this circuit for this level.rw IsisWideL1Metric .1.3.6.1.4.1.2272.1.63.5.1.7 |
rcIsisTrap OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.63.9 |
rcIsisLocalLspIdThe 8 byte Local LSP ID, consisting of the SystemID,
Circuit ID, and Fragment Number.ro DisplayString .1.3.6.1.4.1.2272.1.63.9.1 |
rcIsisLocall1Metricl1-metric for ISIS interface on local Node.ro IsisDefaultL1Metric .1.3.6.1.4.1.2272.1.63.9.2 |
rcIsisNgbLspIdThe 8 byte neighbor LSP ID, consisting of the SystemID,
Circuit ID, and Fragment Number.ro DisplayString .1.3.6.1.4.1.2272.1.63.9.3 |
rcIsisNgbl1Metricl1-metric for ISIS interface on neighbor Node.ro IsisDefaultL1Metric .1.3.6.1.4.1.2272.1.63.9.4 |
rcIsisPlsbTrapTypero Enumeration .1.3.6.1.4.1.2272.1.63.9.5 |
rcIsisLocalSysIdISIS local node system-id.ro DisplayString .1.3.6.1.4.1.2272.1.63.9.6 |
rcIsisLocalInterfaceISIS local interface index.ro Integer32 .1.3.6.1.4.1.2272.1.63.9.7 |
rcIsisTrapIndicatorindicates that an alarm has been
Raised, or an alarm has been cleared.ro Enumeration .1.3.6.1.4.1.2272.1.63.9.8 |
rcIsisLocalNicknameISIS local node nick-name.ro DisplayString .1.3.6.1.4.1.2272.1.63.9.9 |
rcIsisNgbNicknameISIS neighbor node nick-name.ro DisplayString .1.3.6.1.4.1.2272.1.63.9.10 |
rcIsisNgbSysIdISIS neighbor node system-id.ro DisplayString .1.3.6.1.4.1.2272.1.63.9.11 |
rcIsisLocalPrimaryBvidISIS local primary B-VID.ro IsisPlsbBvid .1.3.6.1.4.1.2272.1.63.9.12 |
rcIsisLocalPrimaryTieBrkAlgThe tie breaking algorithm applied to local primary B-VID.ro IsisPlsbBvidTieBrkAlg .1.3.6.1.4.1.2272.1.63.9.13 |
rcIsisLocalSecondaryBvidISIS local secondary B-VID.ro IsisPlsbBvid .1.3.6.1.4.1.2272.1.63.9.14 |
rcIsisLocalSecondaryTieBrkAlgThe tie breaking algorithm applied to local seconday B-VID.ro IsisPlsbBvidTieBrkAlg .1.3.6.1.4.1.2272.1.63.9.15 |
rcIsisNgbPrimaryBvidISIS neighbor primary B-VID.ro IsisPlsbBvid .1.3.6.1.4.1.2272.1.63.9.16 |
rcIsisNgbPrimaryTieBrkAlgThe neighbor tie breaking algorithm applied to primary B-VID.ro IsisPlsbBvidTieBrkAlg .1.3.6.1.4.1.2272.1.63.9.17 |
rcIsisNgbSecondaryBvidISIS neighbor secondary B-VID.ro IsisPlsbBvid .1.3.6.1.4.1.2272.1.63.9.18 |
rcIsisNgbSecondaryTieBrkAlgThe neighbor tie breaking algorithm applied to secondary B-VID.ro IsisPlsbBvidTieBrkAlg .1.3.6.1.4.1.2272.1.63.9.19 |
rcIsisLocalVirtualBmacThe SMLT Virtual BMAC configured in the local IST switch.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2272.1.63.9.20 |
rcIsisPeerVirtualBmacThe SMLT Virtual BMAC configured in the IST Peer.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2272.1.63.9.21 |
rcIsisSysIdThe isis system id configured in the local switch or IST peer.ro DisplayString .1.3.6.1.4.1.2272.1.63.9.22 |
rcIsisSmltPeerSysIdThe SMLT Peer system-id configured in the local switch or IST Peer.ro DisplayString .1.3.6.1.4.1.2272.1.63.9.23 |
rcIsisAdjStateindicate different ISIS adjacency states.ro Enumeration .1.3.6.1.4.1.2272.1.63.9.24 |
rcIsisDuplicateNnameCounterindicate how many nodes in the network share the nick-name.ro INTEGER .1.3.6.1.4.1.2272.1.63.9.25 |
rcIsisLocalBvidCounterindicate how many b-vid configured on local nodes.ro INTEGER .1.3.6.1.4.1.2272.1.63.9.26 |
rcIsisNgbBvidCounterindicate how many b-vid configured on a neighbor nodes.ro INTEGER .1.3.6.1.4.1.2272.1.63.9.27 |
rcIsisLocalSmltSplitBebThe SMLT Split-BEB configured in the local IST switch.ro Enumeration .1.3.6.1.4.1.2272.1.63.9.28 |
rcIsisPeerSmltSplitBebThe SMLT Split-BEB configured in the IST Peer switch.ro Enumeration .1.3.6.1.4.1.2272.1.63.9.29 |
rcIsisLocalHostNameISIS local host name.ro OCTET STRING .1.3.6.1.4.1.2272.1.63.9.30 |
rcIsisNgbHostNameISIS neighbor host name.ro OCTET STRING .1.3.6.1.4.1.2272.1.63.9.31 |
rcIsisPrevInterfaceISIS local interface index for previously found adj.ro Integer32 .1.3.6.1.4.1.2272.1.63.9.32 |
rcIsisAdjTableTable of IS-IS Adjacency, this is extension
to the isisISAdjTable defined in ISIS MIB SEQUENCE OF RcIsisAdjEntry .1.3.6.1.4.1.2272.1.63.10 |
rcIsisAdjEntryAn entry of rcIsisAdj Table. A Entry in
table exists for each ISIS adjacency RcIsisAdjEntry .1.3.6.1.4.1.2272.1.63.10.1 |
rcIsisAdjCircIndexThe identifier of this circuit, unique within the
Intermediate System. This object follows
the index behavior. This is for SNMP Indexing
purposes only and need not have any relation to
any protocol value. Integer32 .1.3.6.1.4.1.2272.1.63.10.1.1 |
rcIsisAdjIndexA unique value identifying the IS adjacency from all
other such adjacencies on this circuit. This value is
automatically assigned by the system when the adjacency
is created. Unsigned32 .1.3.6.1.4.1.2272.1.63.10.1.2 |
rcIsisAdjHostNameThe hostname listed in LSP, or the system name if host
name is not configured.ro OCTET STRING .1.3.6.1.4.1.2272.1.63.10.1.3 |
rcIsisAdjIfIndexThe value of ifIndex for the interface to which this
circuit corresponds.ro InterfaceIndex .1.3.6.1.4.1.2272.1.63.10.1.4 |
rcIsisLSPTableTable of IS-IS LSP, this is extension
to the isisLSPSummaryTable defined in ISIS MIB SEQUENCE OF RcIsisLSPEntry .1.3.6.1.4.1.2272.1.63.11 |
rcIsisLSPEntryAn entry of rcIsisLSP Table. A Entry in
table exists for each ISIS LSP RcIsisLSPEntry .1.3.6.1.4.1.2272.1.63.11.1 |
rcIsisLSPLevelAt which level does this LSP appear? Enumeration .1.3.6.1.4.1.2272.1.63.11.1.1 |
rcIsisLSPIDThe 8 byte LSP ID, consisting of the SystemID,
Circuit ID, and Fragment Number. OCTET STRING .1.3.6.1.4.1.2272.1.63.11.1.2 |
rcIsisLSPSeqThe sequence number for this LSP.ro Unsigned32 .1.3.6.1.4.1.2272.1.63.11.1.3 |
rcIsisLSPHostNameThe hostname listed in LSP, or the system name if host
name is not configured.ro OCTET STRING .1.3.6.1.4.1.2272.1.63.11.1.4 |
rcIsisLSPNickNamePLSB node's nicknamero Integer32 .1.3.6.1.4.1.2272.1.63.11.1.5 |
rcIsisLSPLifetimeRemainThe remaining lifetime in seconds for this LSP.ro Unsigned32 UNITS "seconds" .1.3.6.1.4.1.2272.1.63.11.1.6 |
rcIsisPlsbIpUnicastFibTableTable of IS-IS PLSB IP Unicast FIB SEQUENCE OF RcIsisPlsbIpUnicastFibEntry .1.3.6.1.4.1.2272.1.63.12 |
rcIsisPlsbIpUnicastFibEntryAn entry of rcIsisPlsbIpUnicastFib Table. A Entry in
table exists for each PLSB IP unicast forwarding entry. RcIsisPlsbIpUnicastFibEntry .1.3.6.1.4.1.2272.1.63.12.1 |
rcIsisPlsbIpUnicastFibVrfIdVRF ID of the IP unicast FIB entry, 0 indicates NRE. Integer32 .1.3.6.1.4.1.2272.1.63.12.1.1 |
rcIsisPlsbIpUnicastFibDestinationIpAddrTypeThe address type of destination IP Address. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2272.1.63.12.1.2 |
rcIsisPlsbIpUnicastFibDestinationIpAddrDestination IP Address of the IP unicast FIB entry.
Support ipv4 size(4) and ipv6 size(16) InetAddress .1.3.6.1.4.1.2272.1.63.12.1.3 |
rcIsisPlsbIpUnicastFibDestinationMaskDestination IP mask of the IP unicast FIB entry InetAddressPrefixLength (INET-ADDRESS-MIB) .1.3.6.1.4.1.2272.1.63.12.1.4 |
rcIsisPlsbIpUnicastFibNextHopBmacthe nexthop BMAC of the IP unicast FIB entry MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2272.1.63.12.1.5 |
rcIsisPlsbIpUnicastFibVlanVlan of the IP unicast FIB entry Integer32 .1.3.6.1.4.1.2272.1.63.12.1.6 |
rcIsisPlsbIpUnicastFibIsidISID of the IP unicast FIB entryro Integer32 .1.3.6.1.4.1.2272.1.63.12.1.7 |
rcIsisPlsbIpUnicastFibNextHopNamethe nexthop hostname of the IP unicast FIB entryro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2272.1.63.12.1.8 |
rcIsisPlsbIpUnicastFibOutgoingPortOutgoing port of the IP unicast Fib entry.ro InterfaceIndex .1.3.6.1.4.1.2272.1.63.12.1.9 |
rcIsisPlsbIpUnicastFibPrefixCostprefix cost of the IP unicast FIB entryro Integer32 .1.3.6.1.4.1.2272.1.63.12.1.10 |
rcIsisPlsbIpUnicastFibSpbmCostbmac cost of the IP unicast FIB entryro Counter64 .1.3.6.1.4.1.2272.1.63.12.1.11 |
rcIsisPlsbUcastFibTableTable of IS-IS PLSB Unicast FIB SEQUENCE OF RcIsisPlsbUcastFibEntry .1.3.6.1.4.1.2272.1.63.13 |
rcIsisPlsbUcastFibEntryAn entry of rcIsisPlsbUcastFib Table. A Entry in
table exists for each PLSB unicast forwarding entry
generated by ISIS SPF computation RcIsisPlsbUcastFibEntry .1.3.6.1.4.1.2272.1.63.13.1 |
rcIsisPlsbUcastFibSysIdSystem ID of the node where unicast FIB entry
come from OCTET STRING .1.3.6.1.4.1.2272.1.63.13.1.1 |
rcIsisPlsbUcastFibVlanVlan of the unicast FIB entry Integer32 .1.3.6.1.4.1.2272.1.63.13.1.2 |
rcIsisPlsbUcastFibDestinationMacAddrDestination Mac Address of the unicast FIB entry MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2272.1.63.13.1.3 |
rcIsisPlsbUcastFibOutgoingPortOutgoing port of the unicast Fib entry.ro InterfaceIndex .1.3.6.1.4.1.2272.1.63.13.1.4 |
rcIsisPlsbUcastFibHostNameHost name of the node where unicast FIB entry
come fromro OCTET STRING .1.3.6.1.4.1.2272.1.63.13.1.5 |
rcIsisPlsbUcastFibCostunicast FIB costro Counter64 .1.3.6.1.4.1.2272.1.63.13.1.6 |
rcIsisPlsbMcastFibTableTable of IS-IS PLSB Multicast FIB SEQUENCE OF RcIsisPlsbMcastFibEntry .1.3.6.1.4.1.2272.1.63.14 |
rcIsisPlsbMcastFibEntryAn entry of rcIsisPlsbMcastFib Table. A Entry in
table exists for each PLSB Multicast forwarding entry
generated by ISIS SPF computation RcIsisPlsbMcastFibEntry .1.3.6.1.4.1.2272.1.63.14.1 |
rcIsisPlsbMcastFibSysIdSystem ID of the node where multicast FIB entry
come from OCTET STRING .1.3.6.1.4.1.2272.1.63.14.1.1 |
rcIsisPlsbMcastFibVlanVlan of the multicast FIB entry Integer32 .1.3.6.1.4.1.2272.1.63.14.1.2 |
rcIsisPlsbMcastFibMcastDestMacAddrMulticast destination Mac Address of the
multicast FIB entry MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2272.1.63.14.1.3 |
rcIsisPlsbMcastFibIsidIsid id of the multicast FIB entryro Integer32 .1.3.6.1.4.1.2272.1.63.14.1.4 |
rcIsisPlsbMcastFibNickNamenick name of node where this i-sid got
configured or discoveredro Integer32 .1.3.6.1.4.1.2272.1.63.14.1.5 |
rcIsisPlsbMcastFibTypePLSB i-sid typero Enumeration .1.3.6.1.4.1.2272.1.63.14.1.6 |
rcIsisPlsbMcastFibOutgoingPortsNni port of the multicast Fib entry.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2272.1.63.14.1.7 |
rcIsisPlsbMcastFibHostNameHost name of the node where multicast FIB entry
come fromro OCTET STRING .1.3.6.1.4.1.2272.1.63.14.1.8 |
rcIsisPlsbNodeTableTable of IS-IS PLSB Node SEQUENCE OF RcIsisPlsbNodeEntry .1.3.6.1.4.1.2272.1.63.15 |
rcIsisPlsbNodeEntryAn entry of rcIsisPlsbNode Table. A Entry in
table exists for each node running PLSB ISIS
in the setup. RcIsisPlsbNodeEntry .1.3.6.1.4.1.2272.1.63.15.1 |
rcIsisPlsbNodeSysIdSystem ID of the PLSB node entry OCTET STRING .1.3.6.1.4.1.2272.1.63.15.1.1 |
rcIsisPlsbNodePrimaryParentSysIdSystem ID of parent node of the PLSB node entry for
primary bvlanro OCTET STRING .1.3.6.1.4.1.2272.1.63.15.1.2 |
rcIsisPlsbNodePrimaryBvlanspbm primary b-vlanro Integer32 .1.3.6.1.4.1.2272.1.63.15.1.3 |
rcIsisPlsbNodeSecondaryParentSysIdSystem ID of parent node of the PLSB node entry for
secondary bvlanro OCTET STRING .1.3.6.1.4.1.2272.1.63.15.1.4 |
rcIsisPlsbNodeSecondaryBvlanspbm secondary b-vlanro Integer32 .1.3.6.1.4.1.2272.1.63.15.1.5 |
rcSlpp OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.64 |
rcSlppMib OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.64.1 |
rcSlppNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.64.1.0 |
rcnSlppPortDownEventNewA port down event that has occurred due to SLPP. The trap
includes the port and its Vlan which receives the packet, and
along with the Vlan ID and source MAC address of the packet coming in
on the port identified. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.64.1.0.2 |
rcSlppObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.64.1.1 |
rcSlppScalars OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.64.1.1.1 |
rcSlppGlobalEnableGlobal enable/disable for the simple loop prevention protocol.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.64.1.1.1.1 |
rcSlppTransmissionIntervalThe interval (in seconds) for which loop detection occurs.rw INTEGER .1.3.6.1.4.1.2272.1.64.1.1.1.2 |
rcSlppEtherTypeSLPP Protocol Identification. The value is normally in Hex.rw Integer32 .1.3.6.1.4.1.2272.1.64.1.1.1.3 |
rcSlppVlanTableTable of VLANs for which simple loop detection occur on. SEQUENCE OF RcSlppVlanEntry .1.3.6.1.4.1.2272.1.64.1.1.2 |
rcSlppVlanEntrySLPP VLAN entry. RcSlppVlanEntry .1.3.6.1.4.1.2272.1.64.1.1.2.1 |
rcSlppVlanVlanIdVlan id for which simple loop detection occurs on. RcVlanIdOrNone .1.3.6.1.4.1.2272.1.64.1.1.2.1.1 |
rcSlppVlanSlppEnableFlag to indicate whether the VLAN entry is active or not for SLPP.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.64.1.1.2.1.2 |
rcSlppVlanRowStatusUsed to create/delete entries.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.64.1.1.2.1.3 |
rcSlppPortTableTable of ports for which simple loop detection occurs on. SEQUENCE OF RcSlppPortEntry .1.3.6.1.4.1.2272.1.64.1.1.3 |
rcSlppPortEntrySLPP Port entry. RcSlppPortEntry .1.3.6.1.4.1.2272.1.64.1.1.3.1 |
rcSlppPortIfIndexPort on which simple loop detection occurs on. InterfaceIndex .1.3.6.1.4.1.2272.1.64.1.1.3.1.1 |
rcSlppPortPktRxThresholdOnce the number of SLPP packets received on this port reaches this threshold action will be taken.Normally, the port will be shutdown.rw Integer32 .1.3.6.1.4.1.2272.1.64.1.1.3.1.2 |
rcSlppPortSlppEnableFlag to indicate whether the port entry is active or not for SLPP.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.64.1.1.3.1.3 |
rcSlppPortIncomingVlanIdVlan id of the classified packet on the port brought down by SLPP.ro RcVlanIdOrNone .1.3.6.1.4.1.2272.1.64.1.1.3.1.5 |
rcSlppPortSrcNodeTypeThe src node type of the received slpp Pkt.ro Enumeration .1.3.6.1.4.1.2272.1.64.1.1.3.1.6 |
rcSlppPortPktRxCountTotal number of SLPP packets received on the port.ro Integer32 .1.3.6.1.4.1.2272.1.64.1.1.3.1.7 |
rcSlppPortTimeToClrPktRxCountTime to clear the SLPP Rx PDU counter. This has a default
value of 21600 seconds. Once SLPP is enabled and port
starts receiving SLPP PDUs, a timer is started and once
the timer exceeds this configured value, rcSlppPortPktRxCount
is reset to zero.rw Unsigned32 .1.3.6.1.4.1.2272.1.64.1.1.3.1.12 |
rcSlppPortRemainingTimeToClrPktRxCountRemaining time to clear the SLPP Rx PDU counter. It is
calculated using rcSlppPortTimeToClrPktRxCount and has
a granularity of 5 seconds.ro Unsigned32 .1.3.6.1.4.1.2272.1.64.1.1.3.1.13 |
rcSlppPortClearPktRxCountClear the SLPP Rx PDU counter.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.64.1.1.3.1.14 |
rcSlppNotificationObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.64.1.2 |
rcSlppIncomingVlanIdVlan id of the classified packet on the port brought down by SLPP.ro RcVlanIdOrNone .1.3.6.1.4.1.2272.1.64.1.2.1 |
rcSlppSrcMacAddressSource MAC address in the classified packet on the port
brought down by SLPP.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2272.1.64.1.2.2 |
rcSlppRxPortIndexPort on which the SLPP packet is received.ro InterfaceIndex .1.3.6.1.4.1.2272.1.64.1.2.3 |
rcSlppRxVlanIdVlan on which the SLPP packet is received.ro RcVlanIdOrNone .1.3.6.1.4.1.2272.1.64.1.2.4 |
rcTacacs OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.65 |
rcTacacsGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.65.1 |
rcTacacsGlobalEnableEnable/disable this feature.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.65.1.1 |
rcTacacsGlobalLastUserNameThe last user for which authentication was attempted using TACACS+.ro OCTET STRING .1.3.6.1.4.1.2272.1.65.1.2 |
rcTacacsGlobalLastAddressTypeThe type of address for the TACACS+ server that was most recently accessedro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2272.1.65.1.3 |
rcTacacsGlobalLastAddressThe address of the TACACS+ server that was most recently accessedro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2272.1.65.1.4 |
rcTacacsAccountingDetermines which application will be accounted by tacacs+.rw Bits .1.3.6.1.4.1.2272.1.65.1.5 |
rcTacacsAuthenticationDetermines which application will be authenticated by tacacs+.rw Bits .1.3.6.1.4.1.2272.1.65.1.6 |
rcTacacsServerTableThe (conceptual) table listing the TACACS+ servers with
which the client shares a secret. SEQUENCE OF RcTacacsServerEntry .1.3.6.1.4.1.2272.1.65.2 |
rcTacacsServerEntryAn entry (conceptual row) representing a TACACS+ server
with which the client shares a secret. RcTacacsServerEntry .1.3.6.1.4.1.2272.1.65.2.1 |
rcTacacsServerAddressTypeSpecifies the type of IP address used on the Tacacs+ server. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2272.1.65.2.1.1 |
rcTacacsServerAddressThe IP address of the TACACS+ server referred to in this table entry. InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2272.1.65.2.1.2 |
rcTacacsServerPortNumberThe TCP port on which the client establishes a connection to the server.
A value of 0 indicates that the system specified default value is used.rw InetPortNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.2272.1.65.2.1.3 |
rcTacacsServerConnectionTypeSpecifies TCP connection type between device and TACACS+ server.
Either a single open connection between a device and server
(SingleConnection), or open/close connection per communication
session (PerSessionConnection).rw Enumeration .1.3.6.1.4.1.2272.1.65.2.1.4 |
rcTacacsServerConnectionStatusSpecifies status TCP connection type between device and TACACS+
server.ro Enumeration .1.3.6.1.4.1.2272.1.65.2.1.5 |
rcTacacsServerTimeoutThe maximum time (in seconds) to wait for this TACACS+ server to reply.rw Integer32 .1.3.6.1.4.1.2272.1.65.2.1.6 |
rcTacacsServerKeySecret key to be shared with this TACACS+ server.
If the key length is zero that indicates no encryption is being used.rw OCTET STRING .1.3.6.1.4.1.2272.1.65.2.1.7 |
rcTacacsServerSourceIpInterfaceEnabledSpecifies whether source address specification is enabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.65.2.1.8 |
rcTacacsServerSourceIpInterfaceTypeSpecifies the type of IP address used on the interface that
connects to the Tacacs+ server. If this value is unknown(0),
then a system-wide default value will be used.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2272.1.65.2.1.9 |
rcTacacsServerSourceIpInterfaceIP address of the interface to use with this server.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2272.1.65.2.1.10 |
rcTacacsServerPriorityDetermines the order in which the TACACS+ servers will be used,
when 1 is the highest priority. If more than one server share
the same priority - they will be used in lexicographic order
(the order of entries in this table).rw Integer32 .1.3.6.1.4.1.2272.1.65.2.1.11 |
rcTacacsServerRowStatusThe row status variable, can be set to destroy or createAndGo.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.65.2.1.12 |
rcIpfix OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.66 |
rcIpfixMib OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.66.1 |
rcIpfixConfGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.66.1.1 |
rcIpfixConfStateEnables/Disables the state of ipfix on the box.rw EnableValue .1.3.6.1.4.1.2272.1.66.1.1.1 |
rcIpfixTable OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.66.1.2 |
rcIpfixConfSlotTableA table to store the configuration details for IPFIX for each
slot. This table is indexed by slot number. SEQUENCE OF RcIpfixConfSlotEntry .1.3.6.1.4.1.2272.1.66.1.2.1 |
rcIpfixConfSlotEntryOne Entry holding IPFIX config information on slot basis. RcIpfixConfSlotEntry .1.3.6.1.4.1.2272.1.66.1.2.1.1 |
rcIpfixConfSlotNumSlot number Integer32 .1.3.6.1.4.1.2272.1.66.1.2.1.1.1 |
rcIpfixConfSlotAgingIntvFlow record aging interval (Value in seconds).rw Integer32 .1.3.6.1.4.1.2272.1.66.1.2.1.1.2 |
rcIpfixConfSlotActiveTimeoutFlow record active timeout value (Value in mins).rw Integer32 .1.3.6.1.4.1.2272.1.66.1.2.1.1.3 |
rcIpfixConfSlotExportIntvFrequency of flow export to collector (Value in sec).rw Integer32 .1.3.6.1.4.1.2272.1.66.1.2.1.1.4 |
rcIpfixConfSlotExportStateState of exporter.rw EnableValue .1.3.6.1.4.1.2272.1.66.1.2.1.1.5 |
rcIpfixConfSlotTempRefIntvSecTemplate refresh timeout. Template is sent out to the
collector at least every x seconds or every y exported
packets, whichever occurs first.rw Integer32 .1.3.6.1.4.1.2272.1.66.1.2.1.1.6 |
rcIpfixConfSlotTempRefIntvPktsTemplate refresh timeout. Template is sent out to the
collector at least every x seconds or every y exported
packets, whichever occurs first.rw Integer32 .1.3.6.1.4.1.2272.1.66.1.2.1.1.7 |
rcIpfixCollectorTableTable to store the configuration details for IPFIX collector
for each slot. This table is indexed by slot number and ip
address. SEQUENCE OF RcIpfixCollectorEntry .1.3.6.1.4.1.2272.1.66.1.2.2 |
rcIpfixCollectorEntryOne entry holds IPFIX collector config information based on
slot info and collector ip address. RcIpfixCollectorEntry .1.3.6.1.4.1.2272.1.66.1.2.2.1 |
rcIpfixCollectorSlotNumSlot number. An index to the CollectorEntry. Integer32 .1.3.6.1.4.1.2272.1.66.1.2.2.1.1 |
rcIpfixCollectorAddressTypeIP address type of the collector. An index to the
CollectorEntry. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2272.1.66.1.2.2.1.2 |
rcIpfixCollectorAddressIP address of the collector. An index to the CollectorEntry. InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2272.1.66.1.2.2.1.3 |
rcIpfixCollectorProtocolProtocol for export data from exporter to collector .rw Enumeration .1.3.6.1.4.1.2272.1.66.1.2.2.1.4 |
rcIpfixCollectorDestPortDest port to send the requests.rw InetPortNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.2272.1.66.1.2.2.1.5 |
rcIpfixCollectorExporterIpTypeIp address type of the exporter for collector.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2272.1.66.1.2.2.1.6 |
rcIpfixCollectorExporterIpIp address of the exporter for collector.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2272.1.66.1.2.2.1.7 |
rcIpfixCollectorProtoVerThis specifies the protocol version for ipfix.rw Enumeration .1.3.6.1.4.1.2272.1.66.1.2.2.1.8 |
rcIpfixCollectorStateState of the particular collector. Enable is true by
default.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.66.1.2.2.1.9 |
rcIpfixCollectorRowStatusUsed to create/delete entries.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.66.1.2.2.1.10 |
rcIpfixConfPortTableA table to store the configuration details for IPFIX for each
port. This table is indexed by port number. SEQUENCE OF RcIpfixConfPortEntry .1.3.6.1.4.1.2272.1.66.1.2.3 |
rcIpfixConfPortEntryEntry holding IPFIX config information per port. RcIpfixConfPortEntry .1.3.6.1.4.1.2272.1.66.1.2.3.1 |
rcIpfixConfPortIdAn index to the IpfixConfPortEntry, a unique identifier of
the portId InterfaceIndex .1.3.6.1.4.1.2272.1.66.1.2.3.1.1 |
rcIpfixConfPortSampleRateUsed to configure the sampling rate. Sample one in every N
packets.rw Integer32 .1.3.6.1.4.1.2272.1.66.1.2.3.1.2 |
rcIpfixConfPortHashPolyCoeffsCommand to set hash polynomial coeffs.rw Integer32 ('000401'h..'FFFFFF'h) .1.3.6.1.4.1.2272.1.66.1.2.3.1.3 |
rcIpfixConfPortHashPolySeedCommand to set hash polynomial seed.rw Integer32 ('000000'h..'FFFFFF'h) .1.3.6.1.4.1.2272.1.66.1.2.3.1.4 |
rcIpfixConfPortFlushThis is used to delete all records stored in COP, or to
initiate an export of all records and delete data base after
the export is finished.rw Enumeration .1.3.6.1.4.1.2272.1.66.1.2.3.1.5 |
rcIpfixConfPortAllTrafficThis is used to enable/disable ipfix on all trafiic, for the
specified port.rw EnableValue .1.3.6.1.4.1.2272.1.66.1.2.3.1.6 |
rcIpfixConfPortHashKeyIdhash key id.rw Enumeration .1.3.6.1.4.1.2272.1.66.1.2.3.1.7 |
rcIpfixConfPortDynamicSampRateIndicates the dynamic sampling rate.ro Integer32 .1.3.6.1.4.1.2272.1.66.1.2.3.1.8 |
rcIpfixHashStatsTableA table of hash Statistics entries to store the statistics
for each slot. This table is indexed by the slot number. SEQUENCE OF RcIpfixHashStatsEntry .1.3.6.1.4.1.2272.1.66.1.2.4 |
rcIpfixHashStatsEntryEntry containing hash statistics information for a particular
slot. RcIpfixHashStatsEntry .1.3.6.1.4.1.2272.1.66.1.2.4.1 |
rcIpfixHashStatsSlotNumA unique identifier for the table. Integer32 .1.3.6.1.4.1.2272.1.66.1.2.4.1.1 |
rcIpfixHashStatsHashOverflowsCount of hash overflows per slot.ro Counter64 .1.3.6.1.4.1.2272.1.66.1.2.4.1.2 |
rcIpfixHashStatsHashDropsCount of hash drops per slot.ro Counter64 .1.3.6.1.4.1.2272.1.66.1.2.4.1.3 |
rcIpfixHashStatsClearSetting this object will clear hash statistics for a slot.rw Enumeration .1.3.6.1.4.1.2272.1.66.1.2.4.1.4 |
rcIpfixHashStatsClearTimeThe value of sysUpTime when the hash statistics were last
cleared.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.2272.1.66.1.2.4.1.5 |
rcIpfixExporterStatsTableA table of Exporter Statistics entries to store the statistics
for each slot, each collector. This table is indexed by the
slot number and collector address. SEQUENCE OF RcIpfixExporterStatsEntry .1.3.6.1.4.1.2272.1.66.1.2.5 |
rcIpfixExporterStatsEntryEntry containing Exporter statistics information for a
particular slot and particular collector. RcIpfixExporterStatsEntry .1.3.6.1.4.1.2272.1.66.1.2.5.1 |
rcIpfixExporterStatsSlotNumIndex for the table, slot number. Integer32 .1.3.6.1.4.1.2272.1.66.1.2.5.1.1 |
rcIpfixExporterStatsCollectorTypeCollector IP address type. This is an index for the table. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2272.1.66.1.2.5.1.2 |
rcIpfixExporterStatsCollectorIndex for the table, collector address. InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2272.1.66.1.2.5.1.3 |
rcIpfixExporterStatsOutPktsNumber of Packets sent.ro Counter64 .1.3.6.1.4.1.2272.1.66.1.2.5.1.4 |
rcIpfixExporterStatsOutOctetsNumber of Bytes sent.ro Counter64 .1.3.6.1.4.1.2272.1.66.1.2.5.1.5 |
rcIpfixExporterStatsPktsLossNumber of Records lost.ro Counter64 .1.3.6.1.4.1.2272.1.66.1.2.5.1.6 |
rcIpfixExporterStatsClearSetting this object will clear exporter statistics.rw Enumeration .1.3.6.1.4.1.2272.1.66.1.2.5.1.7 |
rcIpfixExporterStatsClearTimeThe value of sysUpTime when exporter statistics were last
cleared.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.2272.1.66.1.2.5.1.8 |
rcOspfv3 OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.67 |
rcOspfv3Mib OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.67.1 |
rcOspfv3Objects OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.67.1.1 |
rcOspfv3GeneralGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.67.1.1.1 |
rcOspfv3RouterIdA 32-bit integer uniquely identifying the
router in the Autonomous System.
To ensure uniqueness, this may
default to the value of one of the
router's IPv4 interface addresses if IPv4 is
configured on the router.rw IpAddress .1.3.6.1.4.1.2272.1.67.1.1.1.1 |
rcOspfv3AdminStatThe administrative status of OSPFv3 in the
router. The value 'enabled' denotes that the
OSPFv3 Process is active on at least one inter-
face; 'disabled' disables it on all inter-
faces.rw Enumeration .1.3.6.1.4.1.2272.1.67.1.1.1.2 |
rcOspfv3VersionNumberThe version number of OSPF for IPv6 is 3.ro Enumeration .1.3.6.1.4.1.2272.1.67.1.1.1.3 |
rcOspfv3AreaBdrRtrStatusA flag to note whether this router is an area
border router.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.67.1.1.1.4 |
rcOspfv3ASBdrRtrStatusA flag to note whether this router is config-
ured as an Autonomous System border router.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.67.1.1.1.5 |
rcOspfv3AsScopeLsaCountThe number of AS-Scope (e.g. AS-External) link-state
advertisements in the link-state database.ro Gauge32 .1.3.6.1.4.1.2272.1.67.1.1.1.6 |
rcOspfv3AsScopeLsaCksumSumThe 32-bit unsigned sum of the LS checksums of
the AS-scoped link-state advertisements con-
tained in the link-state database. This sum
can be used to determine if there has been a
change in a router's link state database, and
to compare the link-state database of two
routers.ro Integer32 .1.3.6.1.4.1.2272.1.67.1.1.1.7 |
rcOspfv3OriginateNewLsasThe number of new link-state advertisements
that have been originated. This number is in-
cremented each time the router originates a new
LSA.ro Counter32 .1.3.6.1.4.1.2272.1.67.1.1.1.8 |
rcOspfv3RxNewLsasThe number of link-state advertisements re-
ceived determined to be new instantiations.
This number does not include newer instantia-
tions of self-originated link-state advertise-
ments.ro Counter32 .1.3.6.1.4.1.2272.1.67.1.1.1.9 |
rcOspfv3ExtLsaCountThe number of External(LS type 0x4005) in the link-
state databasero Gauge32 .1.3.6.1.4.1.2272.1.67.1.1.1.10 |
rcOspfv3ExtAreaLsdbLimitThe maximum number of non-default AS-
external-LSAs entries that can be stored in the
link-state database. If the value is -1, then
there is no limit.
When the number of non-default AS-external-LSAs
in a router's link-state database reaches
rcOspfv3ExtAreaLsdbLimit, the router enters Overflow-
State. The router never holds more than
rcOspfv3ExtAreaLsdbLimit non-default AS-external-LSAs
in its database. OspfExtAreaLsdbLimit MUST be set
identically in all routers attached to the OSPFv3
backbone and/or any regular OSPFv3 area. (i.e.,
OSPFv3 stub areas and NSSAs are excluded).rw Integer32 (-1..'7FFFFFFF'h) .1.3.6.1.4.1.2272.1.67.1.1.1.11 |
rcOspfv3MulticastExtensionsA Bit Mask indicating whether the router is
forwarding IPv6 multicast datagrams
based on the algorithms defined in the Multi-
cast Extensions to OSPF.
If intraAreaMulticast set, indicates that the router
can forward IPv6 multicast datagrams in the router's
directly attached areas (called intra-area mul-
ticast routing).
If interAreaMulticast set, indicates that the router
can forward IPv6 multicast datagrams between OSPFv3
areas (called inter-area multicast routing).
If interAsMulticast set, indicates that the router can
forward IPv6 multicast datagrams between Auto-
nomous Systems (called inter-AS multicast rout-
ing).
Only certain combinations of bit settings are
allowed, namely:
- All bits cleared (no multicasting)
- intraAreaMulticast only,
- intraAreaMulticast and interAreaMulticast,
- intraAreaMulticast and interAsMulticast
- intraAreaMulticast, interAreaMulticast and
interAsMulticast
By default, all bits are cleared.rw Bits .1.3.6.1.4.1.2272.1.67.1.1.1.12 |
rcOspfv3ExitOverflowIntervalThe number of seconds that, after entering
OverflowState, a router will attempt to leave
OverflowState. This allows the router to again
originate non-default AS-External-LSAs. When
set to 0, the router will not leave Overflow-
State until restarted.rw Unsigned32 UNITS "seconds" .1.3.6.1.4.1.2272.1.67.1.1.1.13 |
rcOspfv3DemandExtensionsThe router's support for demand routing.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.67.1.1.1.14 |
rcOspfv3TrafficEngineeringSupportThe router's support for traffic engineering
extensions.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.67.1.1.1.15 |
rcOspfv3ReferenceBandwidthReference bandwidth in kilobits/second for
calculating default interface metrics. The
default value is 100,000 KBPS (100 MBPS)rw Unsigned32 .1.3.6.1.4.1.2272.1.67.1.1.1.16 |
rcOspfv3RestartSupportThe router's support for OSPF hitless restart.
Options include: no restart support, only planned
restarts or both planned and unplanned restarts.rw Enumeration .1.3.6.1.4.1.2272.1.67.1.1.1.17 |
rcOspfv3RestartIntervalConfigured OSPF hitless restart timeout interval.rw Integer32 .1.3.6.1.4.1.2272.1.67.1.1.1.18 |
rcOspfv3RestartStatusCurrent status of OSPF hitless restart.ro Enumeration .1.3.6.1.4.1.2272.1.67.1.1.1.19 |
rcOspfv3RestartAgeRemaining time in current OSPF hitless restart
interval.ro Integer32 .1.3.6.1.4.1.2272.1.67.1.1.1.20 |
rcOspfv3RestartExitReasonDescribes the outcome of the last attempt at a
hitless restart. If the value is 'none', no restart
has yet been attempted. If the value is 'inProgress',
a restart attempt is currently underway.ro Enumeration .1.3.6.1.4.1.2272.1.67.1.1.1.21 |
rcOspfv3BadLsaIgnoreThe administrative status of OSPFv3 in the
router. The value 'enabled' denotes that the
OSPFv3 Process is active on at least one inter-
face; 'disabled' disables it on all inter-
faces.rw Enumeration .1.3.6.1.4.1.2272.1.67.1.1.1.22 |
rcOspfv3AreaTableInformation describing the configured parame-
ters and cumulative statistics of the router's
attached areas. SEQUENCE OF RcOspfv3AreaEntry .1.3.6.1.4.1.2272.1.67.1.1.2 |
rcOspfv3AreaEntryInformation describing the configured parame-
ters and cumulative statistics of one of the
router's attached areas. RcOspfv3AreaEntry .1.3.6.1.4.1.2272.1.67.1.1.2.1 |
rcOspfv3AreaIdA 32-bit integer uniquely identifying an area.
Area ID 0.0.0.0 is used for the OSPFv3 backbone. IpAddress .1.3.6.1.4.1.2272.1.67.1.1.2.1.1 |
rcOspfv3ImportAsExternIndicates whether an area is a Stub area, NSSA, or
standard area. AS-scope LSAs are not imported into Stub
Areas or NSSAs. NSSAs import AS-External data as Type-7
LSAs which have Area-scoperw Enumeration .1.3.6.1.4.1.2272.1.67.1.1.2.1.2 |
rcOspfv3AreaSpfRunsThe number of times that the intra-area route
table has been calculated using this area's
link-state database. This is typically done
using Dijkstra's algorithm.ro Counter32 .1.3.6.1.4.1.2272.1.67.1.1.2.1.3 |
rcOspfv3AreaBdrRtrCountThe total number of area border routers reach-
able within this area. This is initially zero,
and is calculated in each SPF Pass.ro Gauge32 .1.3.6.1.4.1.2272.1.67.1.1.2.1.4 |
rcOspfv3AreaAsBdrRtrCountThe total number of Autonomous System border
routers reachable within this area. This is
initially zero, and is calculated in each SPF
Pass.ro Gauge32 .1.3.6.1.4.1.2272.1.67.1.1.2.1.5 |
rcOspfv3AreaScopeLsaCountThe total number of Area-Scope link-state
advertisements in this area's link-state
database.ro Gauge32 .1.3.6.1.4.1.2272.1.67.1.1.2.1.6 |
rcOspfv3AreaScopeLsaCksumSumThe 32-bit unsigned sum of the Area-Scope link-state
advertisements' LS checksums contained in this
area's link-state database. The sum can be used
to determine if there has been a change in a
router's link state database, and to compare the
link-state database of two routers.ro Integer32 .1.3.6.1.4.1.2272.1.67.1.1.2.1.7 |
rcOspfv3AreaSummaryThe variable rcOspfv3AreaSummary controls the im-
port of Inter-Area LSAs into stub areas. It has
no effect on other areas.
If it is noAreaSummary, the router will neither
originate nor propagate Inter-Area LSAs into the
stub area. It will rely entirely on its de-
fault route.
If it is sendAreaSummary, the router will both
summarize and propagate Inter-Area LSAs.rw Enumeration .1.3.6.1.4.1.2272.1.67.1.1.2.1.8 |
rcOspfv3AreaStatusThis variable controls the status of the en-
try. The use of RowStatus is covered in more detail
in [6].rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.67.1.1.2.1.9 |
rcOspfv3StubMetricThe metric value advertised for the default route
into Stub and NSSA areas.rw Integer32 (0..'FFFFFF'h) .1.3.6.1.4.1.2272.1.67.1.1.2.1.10 |
rcOspfv3AreaNssaTranslatorRoleIndicates an NSSA Border router's ability to
perform NSSA translation of type-7 LSAs into
type-5 LSAs.rw Enumeration .1.3.6.1.4.1.2272.1.67.1.1.2.1.11 |
rcOspfv3AreaNssaTranslatorStateIndicates if and how an NSSA Border router is
performing NSSA translation of type-7 LSAs into type-5
LSAs. When this object is set to enabled, the NSSA
Border router's rcOspfv3AreaNssTranslatorRole
has been set to always. When this object is set to
elected, a candidate NSSA Border router is translating
type-7 LSAs into type-5. When this object is set to
disabled, a candidate NSSA Border router is NOT
translating type-7 LSAs into type-5.ro Enumeration .1.3.6.1.4.1.2272.1.67.1.1.2.1.12 |
rcOspfv3AreaNssaTranslatorStabilityIntervalThe number of seconds after an elected translator
determines its services are no longer required, that
it should continue to perform its translation duties.rw Unsigned32 UNITS "seconds" .1.3.6.1.4.1.2272.1.67.1.1.2.1.13 |
rcOspfv3AreaNssaTranslatorEventsIndicates the number of Translator State changes
that have occurred since the last boot-up.ro Counter32 .1.3.6.1.4.1.2272.1.67.1.1.2.1.14 |
rcOspfv3AreaStubMetricTypeThis variable displays the type of metric ad-
vertised as a default route.rw Enumeration .1.3.6.1.4.1.2272.1.67.1.1.2.1.15 |
rcOspfv3AsLsdbTableThe OSPFv3 Process's AS-Scope Link State Database. SEQUENCE OF RcOspfv3AsLsdbEntry .1.3.6.1.4.1.2272.1.67.1.1.3 |
rcOspfv3AsLsdbEntryA single AS-Scope Link State Advertisement. RcOspfv3AsLsdbEntry .1.3.6.1.4.1.2272.1.67.1.1.3.1 |
rcOspfv3AsLsdbTypeThe type of the link state advertisement.
Each link state type has a separate advertise-
ment format. AS-Scope LSAs not recognized by
the router may be stored in the database. Enumeration .1.3.6.1.4.1.2272.1.67.1.1.3.1.1 |
rcOspfv3AsLsdbRouterIdThe 32 bit number that uniquely identifies the
originating router in the Autonomous System. IpAddress .1.3.6.1.4.1.2272.1.67.1.1.3.1.2 |
rcOspfv3AsLsdbLsidThe Link State ID is an LS Type Specific field
containing a unique identifier;
it identifies the piece of the routing domain
that is being described by the advertisement.
In contrast to OSPFv2, the LSID has no
addressing semantics. Unsigned32 .1.3.6.1.4.1.2272.1.67.1.1.3.1.3 |
rcOspfv3AsLsdbSequenceThe sequence number field is a signed 32-bit
integer. It is used to detect old and dupli-
cate link state advertisements. The space of
sequence numbers is linearly ordered. The
larger the sequence number the more recent the
advertisement.ro Integer32 .1.3.6.1.4.1.2272.1.67.1.1.3.1.4 |
rcOspfv3AsLsdbAgeThis field is the age of the link state adver-
tisement in seconds.ro Integer32 -- Should be 0..MaxAge -- unless DoNotAge bit is set UNITS "seconds" .1.3.6.1.4.1.2272.1.67.1.1.3.1.5 |
rcOspfv3AsLsdbChecksumThis field is the checksum of the complete
contents of the advertisement, excepting the
age field. The age field is excepted so that
an advertisement's age can be incremented
without updating the checksum. The checksum
used is the same that is used for ISO connec-
tionless datagrams; it is commonly referred to
as the Fletcher checksum.ro Integer32 .1.3.6.1.4.1.2272.1.67.1.1.3.1.6 |
rcOspfv3AsLsdbAdvertisementThe entire Link State Advertisement, including
its header.ro OCTET STRING .1.3.6.1.4.1.2272.1.67.1.1.3.1.7 |
rcOspfv3AsLsdbTypeKnownIs the LSA type recognized by this Router?ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.67.1.1.3.1.8 |
rcOspfv3AreaLsdbTableThe OSPFv3 Process's Area-Scope Link State Database. SEQUENCE OF RcOspfv3AreaLsdbEntry .1.3.6.1.4.1.2272.1.67.1.1.4 |
rcOspfv3AreaLsdbEntryA single Area-Scope Link State Advertisement. RcOspfv3AreaLsdbEntry .1.3.6.1.4.1.2272.1.67.1.1.4.1 |
rcOspfv3AreaLsdbAreaIdThe 32 bit identifier of the Area from which the
LSA was received. IpAddress .1.3.6.1.4.1.2272.1.67.1.1.4.1.1 |
rcOspfv3AreaLsdbTypeThe type of the link state advertisement.
Each link state type has a separate advertise-
ment format. Area-Scope LSAs unrecognized by the
router are also stored in this database. Enumeration .1.3.6.1.4.1.2272.1.67.1.1.4.1.2 |
rcOspfv3AreaLsdbRouterIdThe 32 bit number that uniquely identifies the
originating router in the Autonomous System. IpAddress .1.3.6.1.4.1.2272.1.67.1.1.4.1.3 |
rcOspfv3AreaLsdbLsidThe Link State ID is an LS Type Specific field
containing a unique identifier;
it identifies the piece of the routing domain
that is being described by the advertisement.
In contrast to OSPFv2, the LSID has no
addressing semantics. Unsigned32 .1.3.6.1.4.1.2272.1.67.1.1.4.1.4 |
rcOspfv3AreaLsdbSequenceThe sequence number field is a signed 32-bit
integer. It is used to detect old and dupli-
cate link state advertisements. The space of
sequence numbers is linearly ordered. The
larger the sequence number the more recent the
advertisement.ro Integer32 .1.3.6.1.4.1.2272.1.67.1.1.4.1.5 |
rcOspfv3AreaLsdbAgeThis field is the age of the link state adver-
tisement in seconds.ro Integer32 -- Should be 0..MaxAge -- unless DoNotAge bit is set UNITS "seconds" .1.3.6.1.4.1.2272.1.67.1.1.4.1.6 |
rcOspfv3AreaLsdbChecksumThis field is the checksum of the complete
contents of the advertisement, excepting the
age field. The age field is excepted so that
an advertisement's age can be incremented
without updating the checksum. The checksum
used is the same that is used for ISO connec-
tionless datagrams; it is commonly referred to
as the Fletcher checksum.ro Integer32 .1.3.6.1.4.1.2272.1.67.1.1.4.1.7 |
rcOspfv3AreaLsdbAdvertisementThe entire Link State Advertisement, including
its header.ro OCTET STRING .1.3.6.1.4.1.2272.1.67.1.1.4.1.8 |
rcOspfv3AreaLsdbTypeKnownIs the LSA type recognized by this Router?ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.67.1.1.4.1.9 |
rcOspfv3LinkLsdbTableThe OSPFv3 Process's Link-Scope Link State Database. SEQUENCE OF RcOspfv3LinkLsdbEntry .1.3.6.1.4.1.2272.1.67.1.1.5 |
rcOspfv3LinkLsdbEntryA single Link-Scope Link State Advertisement. RcOspfv3LinkLsdbEntry .1.3.6.1.4.1.2272.1.67.1.1.5.1 |
rcOspfv3LinkLsdbIfIndexThe identifier of the link from which the LSA
was received. InterfaceIndex .1.3.6.1.4.1.2272.1.67.1.1.5.1.1 |
rcOspfv3LinkLsdbTypeThe type of the link state advertisement.
Each link state type has a separate advertise-
ment format. Link-Scope LSAs unrecognized by the
router are also stored in this database. Enumeration .1.3.6.1.4.1.2272.1.67.1.1.5.1.2 |
rcOspfv3LinkLsdbRouterIdThe 32 bit number that uniquely identifies the
originating router in the Autonomous System. IpAddress .1.3.6.1.4.1.2272.1.67.1.1.5.1.3 |
rcOspfv3LinkLsdbLsidThe Link State ID is an LS Type Specific field
containing a unique identifier;
it identifies the piece of the routing domain
that is being described by the advertisement.
In contrast to OSPFv2, the LSID has no
addressing semantics. Unsigned32 .1.3.6.1.4.1.2272.1.67.1.1.5.1.4 |
rcOspfv3LinkLsdbSequenceThe sequence number field is a signed 32-bit
integer. It is used to detect old and dupli-
cate link state advertisements. The space of
sequence numbers is linearly ordered. The
larger the sequence number the more recent the
advertisement.ro Integer32 .1.3.6.1.4.1.2272.1.67.1.1.5.1.5 |
rcOspfv3LinkLsdbAgeThis field is the age of the link state
advertisement in seconds.ro Integer32 -- Should be 0..MaxAge -- unless DoNotAge bit is set UNITS "seconds" .1.3.6.1.4.1.2272.1.67.1.1.5.1.6 |
rcOspfv3LinkLsdbChecksumThis field is the checksum of the complete
contents of the advertisement, excepting the
age field. The age field is excepted so that
an advertisement's age can be incremented
without updating the checksum. The checksum
used is the same that is used for ISO connec-
tionless datagrams; it is commonly referred to
as the Fletcher checksum.ro Integer32 .1.3.6.1.4.1.2272.1.67.1.1.5.1.7 |
rcOspfv3LinkLsdbAdvertisementThe entire Link State Advertisement, including
its header.ro OCTET STRING .1.3.6.1.4.1.2272.1.67.1.1.5.1.8 |
rcOspfv3LinkLsdbTypeKnownIndicates whether the LSA type is recognized by this
Router.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.67.1.1.5.1.9 |
rcOspfv3HostTableThe list of Hosts, and their metrics, that the
router will advertise as host routes. SEQUENCE OF RcOspfv3HostEntry .1.3.6.1.4.1.2272.1.67.1.1.6 |
rcOspfv3HostEntryA metric to be advertised when a given host is
reachable. RcOspfv3HostEntry .1.3.6.1.4.1.2272.1.67.1.1.6.1 |
rcOspfv3HostAddressTypeThe address type of rcOspfv3HostAddress. Only IPv6
addresses without zone index are expected. Enumeration .1.3.6.1.4.1.2272.1.67.1.1.6.1.1 |
rcOspfv3HostAddressThe IPv6 Address of the Host. Must be a Global
or Site-local address. OCTET STRING .1.3.6.1.4.1.2272.1.67.1.1.6.1.2 |
rcOspfv3HostMetricThe Metric to be advertised.rw Integer32 (0..'FFFF'h) .1.3.6.1.4.1.2272.1.67.1.1.6.1.3 |
rcOspfv3HostStatusThis variable controls the status of the en-
try. The use of RowStatus is covered in more detail
in [6].rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.67.1.1.6.1.4 |
rcOspfv3HostAreaIDThe Area the Host Entry is to be found within.
By default, the area that a subsuming OSPFv3 in-
terface is in, or 0.0.0.0rw IpAddress .1.3.6.1.4.1.2272.1.67.1.1.6.1.5 |
rcOspfv3IfTableThe OSPFv3 Interface Table describes the inter-
faces from the viewpoint of OSPFv3. SEQUENCE OF RcOspfv3IfEntry .1.3.6.1.4.1.2272.1.67.1.1.7 |
rcOspfv3IfEntryThe OSPFv3 Interface Entry describes one inter-
face from the viewpoint of OSPFv3. RcOspfv3IfEntry .1.3.6.1.4.1.2272.1.67.1.1.7.1 |
rcOspfv3IfIndexThe interface index of this OSPFv3 interface.
It corresponds to the interface index of the
IPv6 interface on which OSPFv3 is configured. InterfaceIndex .1.3.6.1.4.1.2272.1.67.1.1.7.1.1 |
rcOspfv3IfAreaIdA 32-bit integer uniquely identifying the area
to which the interface connects. Area ID
0.0.0.0 is used for the OSPFv3 backbone.rw IpAddress .1.3.6.1.4.1.2272.1.67.1.1.7.1.2 |
rcOspfv3IfTypeThe OSPFv3 interface type.rw Enumeration .1.3.6.1.4.1.2272.1.67.1.1.7.1.3 |
rcOspfv3IfAdminStatThe OSPFv3 interface's administrative status.
The value formed on the interface, and the in-
terface will be advertised as an internal route
to some area. The value 'disabled' denotes
that the interface is external to OSPFv3.rw Enumeration .1.3.6.1.4.1.2272.1.67.1.1.7.1.4 |
rcOspfv3IfRtrPriorityThe priority of this interface. Used in
multi-access networks, this field is used in
the designated router election algorithm. The
value 0 signifies that the router is not eligi-
ble to become the designated router on this
particular network. In the event of a tie in
this value, routers will use their Router ID as
a tie breaker.rw Integer32 (0..'FF'h) .1.3.6.1.4.1.2272.1.67.1.1.7.1.5 |
rcOspfv3IfTransitDelayThe estimated number of seconds it takes to
transmit a link state update packet over this
interface.rw Integer32 .1.3.6.1.4.1.2272.1.67.1.1.7.1.6 |
rcOspfv3IfRetransIntervalThe number of seconds between link-state ad-
vertisement retransmissions, for adjacencies
belonging to this interface. This value is
also used when retransmitting database descrip-
tion and link-state request packets.rw Integer32 .1.3.6.1.4.1.2272.1.67.1.1.7.1.7 |
rcOspfv3IfHelloIntervalThe length of time, in seconds, between the
Hello packets that the router sends on the in-
terface. This value must be the same for all
routers attached to a common network.rw Integer32 (1..'FFFF'h) UNITS "seconds" .1.3.6.1.4.1.2272.1.67.1.1.7.1.8 |
rcOspfv3IfRtrDeadIntervalThe number of seconds that a router's Hello
packets have not been seen before it's neigh-
bors declare the router down. This should be
some multiple of the Hello interval. This
value must be the same for all routers attached
to a common network.rw Integer32 (1..'FFFF'h) UNITS "seconds" .1.3.6.1.4.1.2272.1.67.1.1.7.1.9 |
rcOspfv3IfPollIntervalThe larger time interval, in seconds, between
the Hello packets sent to an inactive non-
broadcast multi- access neighbor.rw Unsigned32 UNITS "seconds" .1.3.6.1.4.1.2272.1.67.1.1.7.1.10 |
rcOspfv3IfStateThe OSPFv3 Interface State.ro Enumeration .1.3.6.1.4.1.2272.1.67.1.1.7.1.11 |
rcOspfv3IfDesignatedRouterThe Router ID of the Designated Router.ro IpAddress .1.3.6.1.4.1.2272.1.67.1.1.7.1.12 |
rcOspfv3IfBackupDesignatedRouterThe Router ID of the Backup Designated
Router.ro IpAddress .1.3.6.1.4.1.2272.1.67.1.1.7.1.14 |
rcOspfv3IfEventsThe number of times this OSPF interface has
changed its state, or an error has occurred.ro Counter32 .1.3.6.1.4.1.2272.1.67.1.1.7.1.15 |
rcOspfv3IfStatusThis variable controls the status of the en-
try. The use of RowStatus is covered in more detail in
[6].rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.67.1.1.7.1.17 |
rcOspfv3IfMulticastForwardingThe way multicasts should forwarded on this
interface; not forwarded, forwarded as data
link multicasts, or forwarded as data link uni-
casts. Data link multicasting is not meaning-
ful on point to point and NBMA interfaces, and
setting rcOspfv3MulticastForwarding to 0 effective-
ly disables all multicast forwarding.rw Enumeration .1.3.6.1.4.1.2272.1.67.1.1.7.1.18 |
rcOspfv3IfDemandIndicates whether Demand OSPFv3 procedures (hel-
lo suppression to FULL neighbors and setting the
DoNotAge flag on propagated LSAs) should be per-
formed on this interface.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.67.1.1.7.1.19 |
rcOspfv3IfMetricValueThe metric assigned to this interface.
The default value of the Metric is
Reference Bandwidth / ifSpeed. The value of the
reference bandwidth is configured by the
rcOspfv3ReferenceBandwidth object. A value of '0' means
the metric value of this interface will depend on the speed
of the interface, when the state of the interface is up.
The default (0) metric for Vlan and Tunnel is 10.rw Integer32 (0..'FFFF'h) .1.3.6.1.4.1.2272.1.67.1.1.7.1.20 |
rcOspfv3IfLinkScopeLsaCountThe total number of Link-Scope link-state
advertisements in this link's link-state database.ro Gauge32 .1.3.6.1.4.1.2272.1.67.1.1.7.1.21 |
rcOspfv3IfLinkLsaCksumSumThe 32-bit unsigned sum of the Link-Scope link-state
advertisements' LS checksums contained in this
link's link-state database. The sum can be used
to determine if there has been a change in a
router's link state database, and to compare the
link-state database of two routers.ro Integer32 .1.3.6.1.4.1.2272.1.67.1.1.7.1.22 |
rcOspfv3IfInstIdEnables multiple instances of OSPFv3 to be run over
a single link. Each protocol instance would be assigned
a separate ID. This ID has local link significance
only.rw Integer32 .1.3.6.1.4.1.2272.1.67.1.1.7.1.23 |
rcOspfv3IfDemandNbrProbeIndicates whether or not neighbor probing is
enabled to determine whether or not the neighbor
is inactive. Neighbor probing is disabled by
default.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.67.1.1.7.1.24 |
rcOspfv3IfDemandNbrProbeRetxLimitThe number of consecutive LSA retransmissions before
the neighbor is deemed inactive and the neighbor
adjacency is brought down.rw Unsigned32 UNITS "seconds" .1.3.6.1.4.1.2272.1.67.1.1.7.1.25 |
rcOspfv3IfDemandNbrProbeIntervalDefines how often the neighbor will be probed.rw Unsigned32 UNITS "seconds" .1.3.6.1.4.1.2272.1.67.1.1.7.1.26 |
rcOspfv3VirtIfTableInformation about this router's virtual inter-
faces. SEQUENCE OF RcOspfv3VirtIfEntry .1.3.6.1.4.1.2272.1.67.1.1.8 |
rcOspfv3VirtIfEntryInformation about a single Virtual Interface. RcOspfv3VirtIfEntry .1.3.6.1.4.1.2272.1.67.1.1.8.1 |
rcOspfv3VirtIfAreaIdThe Transit Area that the Virtual Link
traverses. By definition, this is not 0.0.0.0 IpAddress .1.3.6.1.4.1.2272.1.67.1.1.8.1.1 |
rcOspfv3VirtIfNeighborThe Router ID of the Virtual Neighbor. IpAddress .1.3.6.1.4.1.2272.1.67.1.1.8.1.2 |
rcOspfv3VirtIfIndexThe interface ID assigned to this OSPFv3 virtual
interface. It is advertised in Hello's sent over
the virtal link and in the router's router-LSAs.ro Integer32 .1.3.6.1.4.1.2272.1.67.1.1.8.1.3 |
rcOspfv3VirtIfTransitDelayThe estimated number of seconds it takes to
transmit a link- state update packet over this
interface.rw Integer32 .1.3.6.1.4.1.2272.1.67.1.1.8.1.4 |
rcOspfv3VirtIfRetransIntervalThe number of seconds between link-state ad-
vertisement retransmissions, for adjacencies
belonging to this interface. This value is
also used when retransmitting database descrip-
tion and link-state request packets. This
value should be well over the expected round-
trip time.rw Integer32 .1.3.6.1.4.1.2272.1.67.1.1.8.1.5 |
rcOspfv3VirtIfHelloIntervalThe length of time, in seconds, between the
Hello packets that the router sends on the in-
terface. This value must be the same for the
virtual neighbor.rw Integer32 (1..'FFFF'h) UNITS "seconds" .1.3.6.1.4.1.2272.1.67.1.1.8.1.6 |
rcOspfv3VirtIfRtrDeadIntervalThe number of seconds that a router's Hello
packets have not been seen before it's neigh-
bors declare the router down. This should be
some multiple of the Hello interval. This
value must be the same for the virtual neigh-
bor.rw Integer32 (1..'FFFF'h) UNITS "seconds" .1.3.6.1.4.1.2272.1.67.1.1.8.1.7 |
rcOspfv3VirtIfStateOSPF virtual interface states.ro Enumeration .1.3.6.1.4.1.2272.1.67.1.1.8.1.8 |
rcOspfv3VirtIfEventsThe number of state changes or error events on
this Virtual Linkro Counter32 .1.3.6.1.4.1.2272.1.67.1.1.8.1.9 |
rcOspfv3VirtIfStatusThis variable controls the status of the en-
try. The use of RowStatus is covered in more detail
in [6].rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.67.1.1.8.1.10 |
rcOspfv3VirtIfLinkScopeLsaCountThe total number of Link-Scope link-state
advertisements in this virtual link's link-state
database.ro Gauge32 .1.3.6.1.4.1.2272.1.67.1.1.8.1.11 |
rcOspfv3VirtIfLinkLsaCksumSumThe 32-bit unsigned sum of the Link-Scope link-state
advertisements' LS checksums contained in this
virtual link's link-state database. The sum can be used
to determine if there has been a change in a
router's link state database, and to compare the
link-state database of two routers.ro Integer32 .1.3.6.1.4.1.2272.1.67.1.1.8.1.12 |
rcOspfv3NbrTableA table of non-virtual neighbor information. SEQUENCE OF RcOspfv3NbrEntry .1.3.6.1.4.1.2272.1.67.1.1.9 |
rcOspfv3NbrEntryThe information regarding a single neighbor. RcOspfv3NbrEntry .1.3.6.1.4.1.2272.1.67.1.1.9.1 |
rcOspfv3NbrIfIndexThe local link ID of the link over which the
neighbor can be reached. InterfaceIndex .1.3.6.1.4.1.2272.1.67.1.1.9.1.1 |
rcOspfv3NbrRtrIdA 32-bit integer (represented as a type IpAd-
dress) uniquely identifying the neighboring
router in the Autonomous System. IpAddress .1.3.6.1.4.1.2272.1.67.1.1.9.1.2 |
rcOspfv3NbrAddressTypeThe address type of rcOspfv3NbrAddress. Only IPv6
addresses without zone index are expected.ro Enumeration .1.3.6.1.4.1.2272.1.67.1.1.9.1.3 |
rcOspfv3NbrAddressThe IPv6 address of the neighbor associated with
the local link.ro OCTET STRING .1.3.6.1.4.1.2272.1.67.1.1.9.1.4 |
rcOspfv3NbrOptionsA Bit Mask corresponding to the neighbor's op-
tions field.ro Integer32 .1.3.6.1.4.1.2272.1.67.1.1.9.1.5 |
rcOspfv3NbrPriorityThe priority of this neighbor in the designat-
ed router election algorithm. The value 0 sig-
nifies that the neighbor is not eligible to be-
come the designated router on this particular
network.ro INTEGER (0..'FF'h) .1.3.6.1.4.1.2272.1.67.1.1.9.1.6 |
rcOspfv3NbrStateThe State of the relationship with this Neigh-
bor.ro Enumeration .1.3.6.1.4.1.2272.1.67.1.1.9.1.7 |
rcOspfv3NbrEventsThe number of times this neighbor relationship
has changed state, or an error has occurred.ro Counter32 .1.3.6.1.4.1.2272.1.67.1.1.9.1.8 |
rcOspfv3NbrLsRetransQLenThe current length of the retransmission
queue.ro Gauge32 .1.3.6.1.4.1.2272.1.67.1.1.9.1.9 |
rcOspfv3NbrHelloSuppressedIndicates whether Hellos are being suppressed
to the neighborro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.67.1.1.9.1.10 |
rcOspfv3NbrIfIdThe interface ID that the neighbor advertises
in its Hello Packets on this link, that is, the
neighbor's local interface index.ro Integer32 .1.3.6.1.4.1.2272.1.67.1.1.9.1.11 |
rcOspfv3NbrRestartHelperStatusIndicates whether the router is acting
as a hitless restart helper for the neighbor.ro Enumeration .1.3.6.1.4.1.2272.1.67.1.1.9.1.12 |
rcOspfv3NbrRestartHelperAgeRemaining time in current OSPF hitless restart
interval, if the router is acting as a restart
helper for the neighbor.ro Integer32 .1.3.6.1.4.1.2272.1.67.1.1.9.1.13 |
rcOspfv3NbrRestartHelperExitReasonDescribes the outcome of the last attempt at acting
as a hitless restart helper for the neighbor.ro Enumeration .1.3.6.1.4.1.2272.1.67.1.1.9.1.14 |
rcOspfv3NbrDeadIntCntThis is a Dead interval Count or TTL (time to live) field that
indicates how many seconds are left before the Neighbor is
declared down. The starting value is set to the Router Dead
Interval value and it decrements to 0 if there is no Hello
received for that neighbor (then the neighbor is declared down).
When a hello is received, the value is reset to the Router Dead
Interval value again.ro Integer32 UNITS "seconds" .1.3.6.1.4.1.2272.1.67.1.1.9.1.15 |
rcOspfv3NbmaNbrTableA table of configured non-virtual neighbor
information and neighbors dynamically discovered
by lower-level protocols such as Inverse Neighbor
Discovery. SEQUENCE OF RcOspfv3NbmaNbrEntry .1.3.6.1.4.1.2272.1.67.1.1.10 |
rcOspfv3NbmaNbrEntryThe information regarding a single configured
neighbor or neighbor discovered by lower-level
protocols such as Inverse Neighbor Discovery. RcOspfv3NbmaNbrEntry .1.3.6.1.4.1.2272.1.67.1.1.10.1 |
rcOspfv3NbmaNbrIfIndexThe local link ID of the link over which the
neighbor can be reached. InterfaceIndex .1.3.6.1.4.1.2272.1.67.1.1.10.1.1 |
rcOspfv3NbmaNbrAddressThe IPv6 address of the neighbor associated with
the local link. Ipv6Address (IPV6-TC) .1.3.6.1.4.1.2272.1.67.1.1.10.1.2 |
rcOspfv3NbmaNbrPriorityThe priority of this neighbor in the designat-
ed router election algorithm. The value 0 sig-
nifies that the neighbor is not eligible to be-
come the designated router on this particular
network.rw INTEGER (0..'FF'h) .1.3.6.1.4.1.2272.1.67.1.1.10.1.3 |
rcOspfv3NbmaNbrRtrIdA 32-bit integer (represented as a type IpAd-
dress) uniquely identifying the neighboring
router in the Autonomous System. A value of
0.0.0.0 is returned until a Hello is received
from the configured neighbor.ro IpAddress .1.3.6.1.4.1.2272.1.67.1.1.10.1.4 |
rcOspfv3NbmaNbrStateThe State of the relationship with this Neigh-
bor.ro Enumeration .1.3.6.1.4.1.2272.1.67.1.1.10.1.5 |
rcOspfv3NbmaNbrStorageTypeThe storage type for this conceptual row.
Conceptual rows having the value 'permanent' need not
allow write-access to any columnar objects in the row.
Manually configured entries will have a storage type
of nonVolatile while entries dynamically created as a
result of a lower-level protocol such as Inverse
Neighbor Discovery will have a storage type of
volatile.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.2272.1.67.1.1.10.1.6 |
rcOspfv3NbmaNbrStatusThis variable controls the status of the en-
try. The use of RowStatus is covered in more detail
in [6].rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.67.1.1.10.1.7 |
rcOspfv3VirtNbrTableA table of virtual neighbor information. SEQUENCE OF RcOspfv3VirtNbrEntry .1.3.6.1.4.1.2272.1.67.1.1.11 |
rcOspfv3VirtNbrEntryVirtual neighbor information. RcOspfv3VirtNbrEntry .1.3.6.1.4.1.2272.1.67.1.1.11.1 |
rcOspfv3VirtNbrAreaThe Transit Area Identifier. IpAddress .1.3.6.1.4.1.2272.1.67.1.1.11.1.1 |
rcOspfv3VirtNbrRtrIdA 32-bit integer uniquely identifying the
neighboring router in the Autonomous System. IpAddress .1.3.6.1.4.1.2272.1.67.1.1.11.1.2 |
rcOspfv3VirtNbrIfIndexThe local interface ID for the virtual link over
which the neighbor can be reached.ro Integer32 .1.3.6.1.4.1.2272.1.67.1.1.11.1.3 |
rcOspfv3VirtNbrAddressTypeThe address type of rcOspfv3VirtNbrAddress. Only IPv6
addresses without zone index are expected.ro Enumeration .1.3.6.1.4.1.2272.1.67.1.1.11.1.4 |
rcOspfv3VirtNbrAddressThe IPv6 address advertised by this Virtual Neighbor.
It must be a Site-Local or Global scope address.ro OCTET STRING .1.3.6.1.4.1.2272.1.67.1.1.11.1.5 |
rcOspfv3VirtNbrOptionsA Bit Mask corresponding to the neighbor's op-
tions field.ro Integer32 .1.3.6.1.4.1.2272.1.67.1.1.11.1.6 |
rcOspfv3VirtNbrStateThe state of the Virtual Neighbor Relation-
ship.ro Enumeration .1.3.6.1.4.1.2272.1.67.1.1.11.1.7 |
rcOspfv3VirtNbrEventsThe number of times this virtual link has
changed its state, or an error has occurred.ro Counter32 .1.3.6.1.4.1.2272.1.67.1.1.11.1.8 |
rcOspfv3VirtNbrLsRetransQLenThe current length of the retransmission
queue.ro Gauge32 .1.3.6.1.4.1.2272.1.67.1.1.11.1.9 |
rcOspfv3VirtNbrHelloSuppressedIndicates whether Hellos are being suppressed
to the neighborro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.67.1.1.11.1.10 |
rcOspfv3VirtNbrIfIdThe interface ID that the neighbor advertises
in its Hello Packets on this virtual link, that is,
the neighbor's local interface ID.ro Integer32 .1.3.6.1.4.1.2272.1.67.1.1.11.1.11 |
rcOspfv3VirtNbrRestartHelperStatusIndicates whether the router is acting
as a hitless restart helper for the neighbor.ro Enumeration .1.3.6.1.4.1.2272.1.67.1.1.11.1.12 |
rcOspfv3VirtNbrRestartHelperAgeRemaining time in current OSPF hitless restart
interval, if the router is acting as a restart
helper for the neighbor.ro Integer32 .1.3.6.1.4.1.2272.1.67.1.1.11.1.13 |
rcOspfv3VirtNbrRestartHelperExitReasonDescribes the outcome of the last attempt at acting
as a hitless restart helper for the neighbor.ro Enumeration .1.3.6.1.4.1.2272.1.67.1.1.11.1.14 |
rcOspfv3AreaAggregateTableA range of IPv6 prefixes specified by a
prefix/prefix length pair. Note that if
ranges are configured such that one range sub-
sumes another range the most specific match is
the preferred one. SEQUENCE OF RcOspfv3AreaAggregateEntry .1.3.6.1.4.1.2272.1.67.1.1.12 |
rcOspfv3AreaAggregateEntryA range of IPv6 prefixes specified by a
prefix/prefix length pair. Note that if
ranges are configured such that one range sub-
sumes another range the most specific match is
the preferred one. RcOspfv3AreaAggregateEntry .1.3.6.1.4.1.2272.1.67.1.1.12.1 |
rcOspfv3AreaAggregateAreaIDThe Area the Address Aggregate is to be found
within. IpAddress .1.3.6.1.4.1.2272.1.67.1.1.12.1.1 |
rcOspfv3AreaAggregateAreaLsdbTypeThe type of the Address Aggregate. This field
specifies the Area Lsdb type that this Address Ag-
gregate applies to. Enumeration .1.3.6.1.4.1.2272.1.67.1.1.12.1.2 |
rcOspfv3AreaAggregatePrefixThe IPv6 Prefix. Ipv6Address (IPV6-TC) .1.3.6.1.4.1.2272.1.67.1.1.12.1.3 |
rcOspfv3AreaAggregatePrefixLengthThe length of the prefix (in bits). A prefix can
not be shorter than 3 bits. Unsigned32 .1.3.6.1.4.1.2272.1.67.1.1.12.1.4 |
rcOspfv3AreaAggregateStatusThis variable controls the status of the en-
try. The use of RowStatus is covered in more detail
in [6].rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.67.1.1.12.1.5 |
rcOspfv3AreaAggregateEffectPrefixes subsumed by ranges either trigger the
advertisement of the indicated aggregate (ad-
vertiseMatching), or result in the prefix not
being advertised at all outside the area.rw Enumeration .1.3.6.1.4.1.2272.1.67.1.1.12.1.6 |
rcOspfv3AreaAggregateRouteTagThis tag is advertised only in the summarized
As-External LSA when summarizing from type-7 to
type-5.rw Integer32 .1.3.6.1.4.1.2272.1.67.1.1.12.1.7 |
rcOspfv3AreaAggregateAdvertiseMetricUsed to specify a metric for a Summary LSA (type 3)
generated by OSPF through an area range.
If this metric is set to 0, OSPF uses the cost
to the farthest point in the networks being
summarized as the metric.rw INTEGER .1.3.6.1.4.1.2272.1.67.1.1.12.1.8 |
rcOspfv3Stats OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.67.1.1.13 |
rcOspfv3StatsTxPacketsUsed to indicate the number of packets
transmitted by OSPF.ro Counter32 .1.3.6.1.4.1.2272.1.67.1.1.13.1 |
rcOspfv3StatsRxPacketsUsed to indicate the number of packets
received by OSPF.ro Counter32 .1.3.6.1.4.1.2272.1.67.1.1.13.2 |
rcOspfv3StatsTxDropPacketsUsed to indicate the number of packets
dropped before transmitted by OSPF.ro Counter32 .1.3.6.1.4.1.2272.1.67.1.1.13.3 |
rcOspfv3StatsRxDropPacketsUsed to indicate the number of packets
dropped before received by OSPF.ro Counter32 .1.3.6.1.4.1.2272.1.67.1.1.13.4 |
rcOspfv3StatsRxBadPacketsUsed to indicate the number of packets
received by OSPF that are bad.ro Counter32 .1.3.6.1.4.1.2272.1.67.1.1.13.5 |
rcOspfv3StatsSpfRunsUsed to indicate the total number of SPF
calculations performed by OSPF, which
also includes the number of partial route
table calculation for Incremental Updates.ro Counter32 .1.3.6.1.4.1.2272.1.67.1.1.13.6 |
rcOspfv3StatsLastSpfRunUsed to indicate the time(SysUpTime) since
the last spf calculated by OSPF.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2272.1.67.1.1.13.7 |
rcOspfv3StatsLsdbTblSizeUsed to indicate the number of entries in
the linkstate database table.ro Gauge32 .1.3.6.1.4.1.2272.1.67.1.1.13.8 |
rcOspfv3StatsBadLsReqsUsed to indicate the number of bad ls requests.ro Counter32 .1.3.6.1.4.1.2272.1.67.1.1.13.9 |
rcOspfv3StatsSeqMismatchesUsed to indicate the number of sequence
mismatched packets.ro Counter32 .1.3.6.1.4.1.2272.1.67.1.1.13.10 |
rcOspfv3Conformance OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.67.1.2 |
rcOspfv3Groups OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.67.1.2.1 |
rcOspfv3Compliances OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.67.1.2.2 |
rcCfm OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.69 |
rcCfmMaintenanceDomainTableConnectivity Fault Management Maintenance Domain table SEQUENCE OF RcCfmMaintenanceDomainEntry .1.3.6.1.4.1.2272.1.69.1 |
rcCfmMaintenanceDomainEntryConnectivity Fault Management Maintenance Domain entry. RcCfmMaintenanceDomainEntry .1.3.6.1.4.1.2272.1.69.1.1 |
rcCfmMaintenanceDomainIndexMaintenance Domain index INTEGER .1.3.6.1.4.1.2272.1.69.1.1.1 |
rcCfmMaintenanceDomainNameMaintenance Domain Namerw DisplayString .1.3.6.1.4.1.2272.1.69.1.1.2 |
rcCfmMaintenanceDomainRowStatusUsed to create/delete entriesrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.69.1.1.3 |
rcCfmMaintenanceDomainNumOfMaUsed to indicate the number of MAs belong
to this maintenance domainro Integer32 .1.3.6.1.4.1.2272.1.69.1.1.4 |
rcCfmMaintenanceDomainLevelTo set the maintenance level in this domainrw INTEGER .1.3.6.1.4.1.2272.1.69.1.1.6 |
rcCfmMaintenanceDomainNumOfMipUsed to indicate the number of Mips belong
to this maintenance domainro Integer32 .1.3.6.1.4.1.2272.1.69.1.1.7 |
rcCfmMaintenanceDomainTypeTo indicate the type of domainro Enumeration .1.3.6.1.4.1.2272.1.69.1.1.8 |
rcCfmMaintenanceAssociationTableConnectivity Fault Management Maintenance Association table SEQUENCE OF RcCfmMaintenanceAssociationEntry .1.3.6.1.4.1.2272.1.69.2 |
rcCfmMaintenanceAssociationEntryConnectivity Fault Management Maintenance Association entry. RcCfmMaintenanceAssociationEntry .1.3.6.1.4.1.2272.1.69.2.1 |
rcCfmMaintenanceAssociationDomainIndexMaintenance Association Domain Index INTEGER .1.3.6.1.4.1.2272.1.69.2.1.1 |
rcCfmMaintenanceAssociationAssociationIndexMaintenance Association Index INTEGER .1.3.6.1.4.1.2272.1.69.2.1.2 |
rcCfmMaintenanceAssociationDomainNameMaintenance Association Domain Namero DisplayString .1.3.6.1.4.1.2272.1.69.2.1.3 |
rcCfmMaintenanceAssociationAssociationNameMaintenance Association Namerw DisplayString .1.3.6.1.4.1.2272.1.69.2.1.4 |
rcCfmMaintenanceAssociationAdminStateAdministratively enable or disable a maintenance association.rw EnableValue .1.3.6.1.4.1.2272.1.69.2.1.5 |
rcCfmMaintenanceAssociationRowStatusUsed to create/delete entriesrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.69.2.1.6 |
rcCfmMaintenanceAssociationNumOfMepUsed to indicate the number of MEPs belong
to this maintenance associationro Integer32 .1.3.6.1.4.1.2272.1.69.2.1.12 |
rcCfmMaintenanceEndPointTableConnectivity Fault Management Maintenance Association table SEQUENCE OF RcCfmMaintenanceEndPointEntry .1.3.6.1.4.1.2272.1.69.3 |
rcCfmMaintenanceEndPointEntryConnectivity Fault Management Maintenance EndPoint entry. RcCfmMaintenanceEndPointEntry .1.3.6.1.4.1.2272.1.69.3.1 |
rcCfmMaintenanceEndPointDomainIndexMaintenance Domain Name Integer32 .1.3.6.1.4.1.2272.1.69.3.1.1 |
rcCfmMaintenanceEndPointAssociationIndexMaintenance Association Name Integer32 .1.3.6.1.4.1.2272.1.69.3.1.2 |
rcCfmMaintenanceEndPointIdMaintenance EndPoint ID Integer32 .1.3.6.1.4.1.2272.1.69.3.1.3 |
rcCfmMaintenanceEndPointDomainNameMaintenance Domain Namero DisplayString .1.3.6.1.4.1.2272.1.69.3.1.4 |
rcCfmMaintenanceEndPointAssociationNameMaintenance Association Namero DisplayString .1.3.6.1.4.1.2272.1.69.3.1.5 |
rcCfmMaintenanceEndPointAdminStateAdministratively enable or disable a maintenance EndPoint.rw EnableValue .1.3.6.1.4.1.2272.1.69.3.1.6 |
rcCfmMaintenanceEndPointRowStatusUsed to create/delete entriesrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.69.3.1.7 |
rcCfmMaintenanceEndPointMepTypeMep Typero Enumeration .1.3.6.1.4.1.2272.1.69.3.1.11 |
rcCfmMaintenanceEndPointServiceDescriptionUsed to specify what service this mep assigned toro DisplayString .1.3.6.1.4.1.2272.1.69.3.1.13 |
rcCfmMaintenanceEndPointMepStatusIndicating if the mep status is active or inactive.
Only Dual-Home Ring endpoint client meps can have
active/inactive status. All other mep types have
active status.ro Enumeration .1.3.6.1.4.1.2272.1.69.3.1.15 |
rcCfmTransmitLbmTableConnectivity Fault Management transmit LBM table SEQUENCE OF RcCfmTransmitLbmEntry .1.3.6.1.4.1.2272.1.69.17 |
rcCfmTransmitLbmEntryConnectivity Fault Management Maintenance EndPoint LBM entry. RcCfmTransmitLbmEntry .1.3.6.1.4.1.2272.1.69.17.1 |
rcCfmTransmitLbmDomainIndexMaintenance Domain Name Integer32 .1.3.6.1.4.1.2272.1.69.17.1.1 |
rcCfmTransmitLbmAssociationIndexMaintenance Association Name Integer32 .1.3.6.1.4.1.2272.1.69.17.1.2 |
rcCfmTransmitLbmIndexMaintenance EndPoint Index Integer32 .1.3.6.1.4.1.2272.1.69.17.1.3 |
rcCfmTransmitLbmDomainNameMaintenance Domain Namero DisplayString .1.3.6.1.4.1.2272.1.69.17.1.4 |
rcCfmTransmitLbmAssociationNameMaintenance Association Namero DisplayString .1.3.6.1.4.1.2272.1.69.17.1.5 |
rcCfmTransmitLbmDestMacAddressAn indication of the target MAC Address Field to
be transmitted, either:
A unicast destination MAC address.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2272.1.69.17.1.6 |
rcCfmTransmitLbmDestMepIdAn indication of the target MAC Address Field to
be transmitted, either:
The Maintenance Assiciation End Point identifier of
another MEP in the same Maintenance Associationrw Integer32 .1.3.6.1.4.1.2272.1.69.17.1.7 |
rcCfmTransmitLbmDestIsMepIdTrue indicates that MepId of the target MEP is used
for Loopback transmission.
False indicates that unicast destination MAC address
of the target MEP is used for Loopback transmission.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.69.17.1.8 |
rcCfmTransmitLbmMessagesThe number of loopback messages to be transmitted.rw Integer32 .1.3.6.1.4.1.2272.1.69.17.1.9 |
rcCfmTransmitLbmVlanPriorityPriority. 3 bit value to be used in the VLAN tsg, if present in
the transmitted frame.rw Integer32 .1.3.6.1.4.1.2272.1.69.17.1.11 |
rcCfmTransmitLbmVlanDropEnableDrop Enable bit value to be used in the VLAN tag, if present in
the transmitted frame.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.69.17.1.12 |
rcCfmTransmitLbmSeqNumberThe transaction identifier/sequence number of the first loopback
message (to be) sent.ro Integer32 .1.3.6.1.4.1.2272.1.69.17.1.13 |
rcCfmTransmitLbmResultOkIndicates the result of the operation:
-true. The Loopback Message(s) will be (or have been) sent.
-false. The Loopback Message(s) will not be sent.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.69.17.1.14 |
rcCfmTransmitLbmStatusStatus of the transmit loopback service:
-ready. The service is available.
-transmit. The service is transmitting, or about to transmit,
the Loopback messages.
-abort The service is aborted or about to abort the Loopback messages.
This column will also be used to avoid concurrency or
race condition problems that could occur if two or
more management entities try to
use the service at the same time.rw Enumeration .1.3.6.1.4.1.2272.1.69.17.1.15 |
rcCfmTransmitLbmResultDisplay the LBM result.ro DisplayString .1.3.6.1.4.1.2272.1.69.17.1.16 |
rcCfmTransmitLbmTimeoutIntThe interval to wait for an LBM time-out with a
range of (1..10) seconds with a default value of 3
seconds.rw Integer32 .1.3.6.1.4.1.2272.1.69.17.1.18 |
rcCfmTransmitLbmInterFrameIntThe interval between LBM frames with a range of
(0..1000) msecs with a default value of 500 msecs.
The value of 0 msecs indicates to send the frames as
fast as possible.rw Integer32 .1.3.6.1.4.1.2272.1.69.17.1.19 |
rcCfmTransmitLbmTestPatternThe test pattern to use in the LBM PDU with range of
values namely allZero, allZeroCrc,
pseudoRandomBitSequence and pseudoRandomBitSequenceCrc
and with a default value of allZero.
value meaning
allZero(1) Null signal without CRC-32
allZeroCrc(2) Null signal with CRC-32
pseudoRandomBitSequence(3) PRBS 1/2^31-1 without CRC-32
pseudoRandomBitSequenceCrc(4) PBRS 1/2^31-1 with CRC-32rw Enumeration .1.3.6.1.4.1.2272.1.69.17.1.20 |
rcCfmTransmitLbmDataSizeAn arbitrary amount of data to be included in the data TLV, if the
Data Size is selected to be sent.rw Integer32 .1.3.6.1.4.1.2272.1.69.17.1.21 |
rcCfmTransmitLbmFrameSizeIf the frame size (64-500 for R-Mod and 64-9600 for RC-Mod)is specified then the data size shall be internally calculated and the calculated data size shall be included in the data TLV.rw Integer32 .1.3.6.1.4.1.2272.1.69.17.1.22 |
rcCfmTransmitLbmSourceModeSource modes of the transmit loopback service.rw Enumeration .1.3.6.1.4.1.2272.1.69.17.1.23 |
rcCfmTransmitLtmTableConnectivity Fault Management transmit LTM table SEQUENCE OF RcCfmTransmitLtmEntry .1.3.6.1.4.1.2272.1.69.18 |
rcCfmTransmitLtmEntryConnectivity Fault Management Maintenance EndPoint LTM entry. RcCfmTransmitLtmEntry .1.3.6.1.4.1.2272.1.69.18.1 |
rcCfmTransmitLtmDomainIndexMaintenance Domain Name Integer32 .1.3.6.1.4.1.2272.1.69.18.1.1 |
rcCfmTransmitLtmAssociationIndexMaintenance Association Name Integer32 .1.3.6.1.4.1.2272.1.69.18.1.2 |
rcCfmTransmitLtmIndexMaintenance EndPoint Index Integer32 .1.3.6.1.4.1.2272.1.69.18.1.3 |
rcCfmTransmitLtmDomainNameMaintenance Domain Namero DisplayString .1.3.6.1.4.1.2272.1.69.18.1.4 |
rcCfmTransmitLtmAssociationNameMaintenance Association Namero DisplayString .1.3.6.1.4.1.2272.1.69.18.1.5 |
rcCfmTransmitLtmVlanPriorityPriority. 3 bit value to be used in the VLAN tag, if present in
the transmitted frame.rw Integer32 .1.3.6.1.4.1.2272.1.69.18.1.6 |
rcCfmTransmitLtmDestMacAddressAn indication of the target MAC Address Field to
be transmitted, either:
A unicast destination MAC address.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2272.1.69.18.1.7 |
rcCfmTransmitLtmDestMepIdAn indication of the target MAC Address Field to
be transmitted, either:
The Maintenance Assiciation End Point identifier of
another MEP in the same Maintenance Associationrw Integer32 .1.3.6.1.4.1.2272.1.69.18.1.8 |
rcCfmTransmitLtmDestIsMepIdTrue indicates that MepId of the target MEP is used
for Loopback transmission.
False indicates that unicast destination MAC address
of the target MEP is used for Loopback transmission.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.69.18.1.9 |
rcCfmTransmitLtmTtlThe number of hops remaining to this LTM.
Decremented by 1 by each Bridge that handles the LTM.
The decremented value is returned in the LTR. If 0
on output, the LTM is not transmitted to the next
hop. The value of the TTL Field in the LTM
transmitted by the originating MEP is controlled by a
Managed Object; The default value if none is
specified is 64.rw Integer32 .1.3.6.1.4.1.2272.1.69.18.1.10 |
rcCfmTransmitLtmSeqNumberThe transaction identifier/sequence number of the first loopback
message (to be) sent.ro Integer32 .1.3.6.1.4.1.2272.1.69.18.1.11 |
rcCfmTransmitLtmResultOkIndicates the result of the operation:
-true. The Loopback Message(s) will be (or have been) sent.
-false. The Loopback Message(s) will not be sent.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.69.18.1.12 |
rcCfmTransmitLtmStatusStatus of the transmit loopback service:
-ready. The service is available.
-transmit. The service is transmitting, or about to
transmit, the Loopback messages.
-abort. The service is aborted, or about to abort
the LTM message
This column will also be used to avoid concurrency or
race condition problems that could occur if two or
more management entities try to
use the service at the same time.rw Enumeration .1.3.6.1.4.1.2272.1.69.18.1.13 |
rcCfmTransmitLtmResultDisplay the LTM result.roobsolete DisplayString .1.3.6.1.4.1.2272.1.69.18.1.14 |
rcCfmTransmitLtmFlagLTM result flag indicating LTM status or error code.
Each enum value represents a status or error case.
1 - No error
2 - Ltm Internal Error
3 - Unknown Remote Maintenance End Point
4 - Invalid Remote Maintenance End Point Mac Address
5 - Unset Remote Maintenance End Point Mac Address
6 - Mep must be enabled in order to perform LTM
7 - No Ltr response received
8 - Linktrace to own Mep MAC is not sent
9 - Endpoint must be enabled in order to perform LTM
10 - Pbt-trunk must be enabled in order to perform LTM
11 - LTM completed
12 - LTM leaf nodero Enumeration .1.3.6.1.4.1.2272.1.69.18.1.15 |
rcCfmTransmitLtmSourceModeSource modes of the transmit linktrace service.rw Enumeration .1.3.6.1.4.1.2272.1.69.18.1.16 |
rcCfmLtrReplyTableThis table contains a list of Linktrace replies received
by a specific MEP in response to a linktrace message. SEQUENCE OF RcCfmLtrReplyEntry .1.3.6.1.4.1.2272.1.69.33 |
rcCfmLtrReplyEntryThe Linktrace Reply table entry. RcCfmLtrReplyEntry .1.3.6.1.4.1.2272.1.69.33.1 |
rcCfmLtrReplyDomainIndexMaintenance Domain Index Integer32 .1.3.6.1.4.1.2272.1.69.33.1.1 |
rcCfmLtrReplyAssociationIndexMaintenance Association Index Integer32 .1.3.6.1.4.1.2272.1.69.33.1.2 |
rcCfmLtrReplyMepIdMaintenance EndPoint ID Integer32 .1.3.6.1.4.1.2272.1.69.33.1.3 |
rcCfmLtrReplySeqNumberThe transaction identifier/sequence number returned by a
previous transmit linktrace message command, indicating which
LTM's response is going to be returned. Integer32 .1.3.6.1.4.1.2272.1.69.33.1.4 |
rcCfmLtrReplyHopThe number of hops away from LTM initiator Integer32 .1.3.6.1.4.1.2272.1.69.33.1.5 |
rcCfmLtrReplyReceiveOrderAn index to distinguish among multiple LTRs with the same
LTR Transaction Identifier field value. This value is
assigned sequentially from 1, in the order that the Linktrace
Initiator received the LTRs. Integer32 .1.3.6.1.4.1.2272.1.69.33.1.6 |
rcCfmLtrReplyTtlTtl field value for a returned LTR.ro Integer32 .1.3.6.1.4.1.2272.1.69.33.1.7 |
rcCfmLtrReplyDomainNameMaintenance Domain Namero DisplayString .1.3.6.1.4.1.2272.1.69.33.1.8 |
rcCfmLtrReplyAssociationNameMaintenance Association Namero DisplayString .1.3.6.1.4.1.2272.1.69.33.1.9 |
rcCfmLtrReplyForwardedIndicates if a LTM was forwarded by the responding MP, as
returned in the 'FwdYes' flag of the flags field.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.69.33.1.10 |
rcCfmLtrReplyTerminalMepA boolean value stating whether the forwarded LTM reached
a MEP enclosing its MA, as returned in the Terminal MEP flag
of the Flags field.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.69.33.1.11 |
rcCfmLtrReplyLastEgressIdentifierAn octet field holding the Last Egress Identifier returned
in the LTR Egress Identifier TLV of the LTR. The Last Egress
Identifier identifies the MEP Linktrace Indicator that
originated, or the Linktrace Responder that forwarded, the LTM
to which this LTR is the response. This is the same value as
the Egress Identifier TLV of that LTM.ro OCTET STRING .1.3.6.1.4.1.2272.1.69.33.1.12 |
rcCfmLtrReplyNextEgressIdentifierAn octet field holding the Next Egress Identifier returned in
the LTR Egress Identifier TLV of the LTR. The Next Egress
Identifier Identifies the Linktrace Responder that transmitted
this LTR, and can forward the LTM to the next hop. This is the
same value as the Egress Identifier TLV of the forwarded LTM,
if any. If the FwdYes bit of the Flags field is false, the
contents of this field are undefined, and the field is ignored
by the receiver.ro OCTET STRING .1.3.6.1.4.1.2272.1.69.33.1.13 |
rcCfmLtrReplyRelayActionValue returned in the Relay Action field.ro CfmRelayActionFieldValue .1.3.6.1.4.1.2272.1.69.33.1.14 |
rcCfmLtrReplySrcMacMac address of the MP that respond to the LTM request for
this LTRro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2272.1.69.33.1.15 |
rcCfmLtrReplyIngressActionThe value returned in the Ingress Action Field of the LTM.
The value ingNoTlv(5) indicates that no Reply Ingress TLV
was returned in the LTM.ro CfmIngressActionFieldValue .1.3.6.1.4.1.2272.1.69.33.1.16 |
rcCfmLtrReplyIngressMacMac address returned in the ingress MAC address field. If the
rcCfmLtrReplyIngress object contains the value ingNoTlv(5), then
the contents of this object are meaningless.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2272.1.69.33.1.17 |
rcCfmLtrReplyIngressPortIdSubtypeFormat of the Ingress Port ID. If the rcCfmLtrReplyIngress
object contains the value ingNoTlv(5), then the contents of
this object are meaningless.ro LldpPortIdSubtype .1.3.6.1.4.1.2272.1.69.33.1.18 |
rcCfmLtrReplyIngressPortIdIngress Port ID. The format of this object is determined by
the value of the rcCfmLtrReplyIngressPortIdSubtype object.
If the rcCfmLtrReplyIngress object contains the value
ingNoTlv(5), then
the contents of this object are meaningless.ro LldpPortId .1.3.6.1.4.1.2272.1.69.33.1.19 |
rcCfmLtrReplyEgressActionThe value returned in the Egress Action Field of the LTM. The
value egrNoTlv(5) indicates that no Reply Egress TLV was
returned in the LTM.ro CfmEgressActionFieldValue .1.3.6.1.4.1.2272.1.69.33.1.20 |
rcCfmLtrReplyEgressMacMac address returned in the egress MAC address field. If the
rcCfmLtrReplyEgress object contains the value egrNoTlv(5),
then the contents of this object are meaningless.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2272.1.69.33.1.21 |
rcCfmLtrReplyEgressPortIdSubtypeFormat of the Egress Port ID. If the rcCfmLtrReplyEgress
object contains the value egrNoTlv(5), then the contents
of this object are meaningless.ro LldpPortIdSubtype .1.3.6.1.4.1.2272.1.69.33.1.22 |
rcCfmLtrReplyEgressPortIdEgress Port ID. The format of this object is determined by
the value of the rcCfmLtrReplyEgressPortIdSubtype object.
If the rcCfmLtrReplyEgress object contains the value
egrNoTlv(5), then the contents of this object are meaningless.ro LldpPortId .1.3.6.1.4.1.2272.1.69.33.1.23 |
rcCfmTransmitL2PingTableConnectivity Fault Management transmit L2Ping table SEQUENCE OF RcCfmTransmitL2PingEntry .1.3.6.1.4.1.2272.1.69.34 |
rcCfmTransmitL2PingEntryConnectivity Fault Management Maintenance EndPoint L2Ping entry. RcCfmTransmitL2PingEntry .1.3.6.1.4.1.2272.1.69.34.1 |
rcCfmTransmitL2PingVlanIdA value that uniquely identifies the Customer Vlan Integer32 .1.3.6.1.4.1.2272.1.69.34.1.1 |
rcCfmTransmitL2PingDestMacAddressAn indication of the target MAC Address field to be transmittedrw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2272.1.69.34.1.2 |
rcCfmTransmitL2PingHostNameThe target host namerw OCTET STRING .1.3.6.1.4.1.2272.1.69.34.1.3 |
rcCfmTransmitL2PingDestIsHostNameTrue indicates that the host name is used for L2Ping transmissionrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.69.34.1.4 |
rcCfmTransmitL2PingMessagesThe number of L2Ping messages to be transmitted.rw Integer32 .1.3.6.1.4.1.2272.1.69.34.1.5 |
rcCfmTransmitL2PingPriorityPriority. 3 bit value to be used in the VLAN hdr,
if present in the transmitted frame.rw Integer32 .1.3.6.1.4.1.2272.1.69.34.1.6 |
rcCfmTransmitL2PingTimeoutIntThe interval to wait for an L2Ping time-out with a
range of (1..10) seconds with a default value of 3
seconds.rw Integer32 .1.3.6.1.4.1.2272.1.69.34.1.7 |
rcCfmTransmitL2PingTestPatternThe test pattern to use in the L2Ping PDU with range of
values namely allZero, allZeroCrc,
pseudoRandomBitSequence and pseudoRandomBitSequenceCrc
and with a default value of allZero.
value meaning
allZero(1) Null signal without CRC-32
allZeroCrc(2) Null signal with CRC-32
pseudoRandomBitSequence(3) PRBS 1/2^31-1 without CRC-32
pseudoRandomBitSequenceCrc(4) PBRS 1/2^31-1 with CRC-32rw Enumeration .1.3.6.1.4.1.2272.1.69.34.1.8 |
rcCfmTransmitL2PingDataSizeAn arbitrary amount of data to be included in the data TLV, if the
Data Size is selected to be sent.rw Integer32 .1.3.6.1.4.1.2272.1.69.34.1.9 |
rcCfmTransmitL2PingFrameSizeIf the frame size is specified then the data size
shall be internally calculated and the calculated data
size shall be included in the data TLV.rw Integer32 .1.3.6.1.4.1.2272.1.69.34.1.10 |
rcCfmTransmitL2PingSourceModeSource modes of the transmit loopback service.rw Enumeration .1.3.6.1.4.1.2272.1.69.34.1.11 |
rcCfmTransmitL2PingSeqNumberThe transaction identifier/sequence number of the first loopback
message (to be) sent.ro Integer32 .1.3.6.1.4.1.2272.1.69.34.1.12 |
rcCfmTransmitL2PingResultOkIndicates the result of the operation:
-true. The L2Ping Message(s) will be (or have been) sent.
-false. The L2Ping Message(s) will not be sent.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.69.34.1.13 |
rcCfmTransmitL2PingStatusStatus of the transmit loopback service:
-ready. The service is available.
-transmit. The service is transmitting, or about to
transmit, the L2Ping messages.
-abort The service is aborted or about to abort
the L2Ping messages.
This column will also be used to avoid concurrency or
race condition problems that could occur if two or
more management entities try to
use the service at the same time.rw Enumeration .1.3.6.1.4.1.2272.1.69.34.1.14 |
rcCfmTransmitL2PingResultDisplay the L2Ping result.ro DisplayString .1.3.6.1.4.1.2272.1.69.34.1.15 |
rcCfmTransmitL2TraceTableConnectivity Fault Management transmit L2Trace table SEQUENCE OF RcCfmTransmitL2TraceEntry .1.3.6.1.4.1.2272.1.69.35 |
rcCfmTransmitL2TraceEntryConnectivity Fault Management Maintenance EndPoint L2Trace entry. RcCfmTransmitL2TraceEntry .1.3.6.1.4.1.2272.1.69.35.1 |
rcCfmTransmitL2TraceVlanIdA value that uniquely identifies the Customer Vlan Integer32 .1.3.6.1.4.1.2272.1.69.35.1.1 |
rcCfmTransmitL2TracePriorityPriority. 3 bit value to be used in the VLAN hdr,
if present in the transmitted frame.rw Integer32 .1.3.6.1.4.1.2272.1.69.35.1.2 |
rcCfmTransmitL2TraceDestMacAddressAn indication of the target MAC Address field to be transmittedrw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2272.1.69.35.1.3 |
rcCfmTransmitL2TraceHostNameThe target host namerw OCTET STRING .1.3.6.1.4.1.2272.1.69.35.1.4 |
rcCfmTransmitL2TraceIsidIsid Idrw Integer32 .1.3.6.1.4.1.2272.1.69.35.1.5 |
rcCfmTransmitL2TraceNickNameLocal Node nick namero DisplayString .1.3.6.1.4.1.2272.1.69.35.1.6 |
rcCfmTransmitL2TraceDestIsHostNameTrue indicates that the host name is used for L2Trace transmissionrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.69.35.1.7 |
rcCfmTransmitL2TraceIsidTreeTrue indicates that the multicast tree will be traced.
False indicates that the unicast path will be tracedrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.69.35.1.8 |
rcCfmTransmitL2TraceTtlThe number of hops remaining to this L2Trace.
Decremented by 1 by each Bridge that handles the L2Trace.
The decremented value is returned in the L2Trace. If 0
on output, the L2Trace is not transmitted to the next
hop. The value of the TTL Field in the L2Trace
transmitted by the originating MEP is controlled by a
Managed Object; The default value if none is
specified is 64.rw Integer32 .1.3.6.1.4.1.2272.1.69.35.1.9 |
rcCfmTransmitL2TraceSourceModeSource modes of the transmit loopback service.rw Enumeration .1.3.6.1.4.1.2272.1.69.35.1.10 |
rcCfmTransmitL2TraceSeqNumberThe transaction identifier/sequence number of the first loopback
message (to be) sent.ro Integer32 .1.3.6.1.4.1.2272.1.69.35.1.11 |
rcCfmTransmitL2TraceResultOkIndicates the result of the operation:
-true. The L2Trace Message(s) will be (or have been) sent.
-false. The L2Trace Message(s) will not be sent.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.69.35.1.12 |
rcCfmTransmitL2TraceStatusStatus of the transmit loopback service:
-ready. The service is available.
-transmit. The service is transmitting, or about to
transmit, the L2Trace messages.
-abort The service is aborted or about to abort
the L2Trace messages.
This column will also be used to avoid concurrency or
race condition problems that could occur if two or
more management entities try to
use the service at the same time.rw Enumeration .1.3.6.1.4.1.2272.1.69.35.1.13 |
rcCfmTransmitL2TraceFlagL2Trace result flag indicating L2Trace status or error code.
Each enum value represents a status or error case.
1 - No error
2 - L2Trace Internal Error
3 - Invalid Mac Address
4 - Mep must be enabled in order to perform L2Trace
5 - No L2Trace response received
6 - L2Trace to own Mep MAC is not sent
7 - L2Trace completed
8 - Lookup failure for L2Trace
9 - On a leaf node in the i-sid tree
10 - Not in the i-sid tree
11 - Requested SMLT Source from Non-Primary Nodero Enumeration .1.3.6.1.4.1.2272.1.69.35.1.14 |
rcCfmL2TraceReplyTableThis table contains a list of l2trace replies received
by a specific MEP in response to a linktrace message. SEQUENCE OF RcCfmL2TraceReplyEntry .1.3.6.1.4.1.2272.1.69.36 |
rcCfmL2TraceReplyEntryThe Linktrace Reply table entry. RcCfmL2TraceReplyEntry .1.3.6.1.4.1.2272.1.69.36.1 |
rcCfmL2TraceReplyVlanIdA value that uniquely identifies the Customer Vlan Integer32 .1.3.6.1.4.1.2272.1.69.36.1.1 |
rcCfmL2TraceReplySeqNumberThe transaction identifier/sequence number returned by a
previous transmit linktrace message command, indicating which
L2Trace's response is going to be returned. Integer32 .1.3.6.1.4.1.2272.1.69.36.1.2 |
rcCfmL2TraceReplyHopThe number of hops away from L2Trace initiator. Integer32 .1.3.6.1.4.1.2272.1.69.36.1.3 |
rcCfmL2TraceReplyReceiveOrderAn index to distinguish among multiple L2Trace responses
with the same Transaction Identifier field value. This value
is assigned sequentially from 1, in the order that the
Linktrace Initiator received the responses. Integer32 .1.3.6.1.4.1.2272.1.69.36.1.4 |
rcCfmL2TraceReplyTtlTtl field value for a returned L2Trace response.ro Integer32 .1.3.6.1.4.1.2272.1.69.36.1.5 |
rcCfmL2TraceReplySrcMacMac address of the MP that respond to the L2Trace request for
this L2traceReplyro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2272.1.69.36.1.6 |
rcCfmL2TraceReplyHostNameThe host name of the replying nodero OCTET STRING .1.3.6.1.4.1.2272.1.69.36.1.7 |
rcCfmL2TraceReplyLastSrcMacThe MAC address of the node that forwarded the L2Trace to the responding nodero MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2272.1.69.36.1.8 |
rcCfmL2TraceReplyLastHostNameThe host name of the node that forwarded the L2Trace to the responding nodero OCTET STRING .1.3.6.1.4.1.2272.1.69.36.1.9 |
rcCfmTransmitL2IpPingTableConnectivity Fault Management transmit L2IpPing table SEQUENCE OF RcCfmTransmitL2IpPingEntry .1.3.6.1.4.1.2272.1.69.37 |
rcCfmTransmitL2IpPingEntryL2IpPing entry. RcCfmTransmitL2IpPingEntry .1.3.6.1.4.1.2272.1.69.37.1 |
rcCfmTransmitL2IpPingIpAddrTypeThe address type of destination IP Address InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2272.1.69.37.1.1 |
rcCfmTransmitL2IpPingIpAddrDestination IP Address. Support ipv4 at this time InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2272.1.69.37.1.2 |
rcCfmTransmitL2IpPingVrfIdVRF IDro Integer32 .1.3.6.1.4.1.2272.1.69.37.1.3 |
rcCfmTransmitL2IpPingVrfNameThe Name of the Virtual Routerro DisplayString .1.3.6.1.4.1.2272.1.69.37.1.4 |
rcCfmTransmitL2IpPingMessagesThe number of L2IpPing messages to be transmitted
per mac/vlan pair.rw Integer32 .1.3.6.1.4.1.2272.1.69.37.1.5 |
rcCfmTransmitL2IpPingTimeoutIntThe interval to wait for an L2IpPing time-out with a
range of (1..10) seconds with a default value of 3
seconds.rw Integer32 .1.3.6.1.4.1.2272.1.69.37.1.6 |
rcCfmTransmitL2IpPingTestPatternThe test pattern to use in the L2IpPing PDUs
with range of values namely allZero, allZeroCrc,
pseudoRandomBitSequence and pseudoRandomBitSequenceCrc
and with a default value of allZero.
value meaning
allZero(1) Null signal without CRC-32
allZeroCrc(2) Null signal with CRC-32
pseudoRandomBitSequence(3) PRBS 1/2^31-1 without CRC-32
pseudoRandomBitSequenceCrc(4) PBRS 1/2^31-1 with CRC-32rw Enumeration .1.3.6.1.4.1.2272.1.69.37.1.7 |
rcCfmTransmitL2IpPingDataSizeAn arbitrary amount of data to be included in the
data TLV, if the Data Size is selected to be sent.rw Integer32 .1.3.6.1.4.1.2272.1.69.37.1.8 |
rcCfmTransmitL2IpPingStatusStatus of the transmit loopback service:
-ready. The service is available.
-transmit. The service is transmitting, or about to
transmit, the L2IpPing messages.
-abort The service is aborted or about to abort
the L2IpPing messages.
This column will also be used to avoid concurrency or
race condition problems that could occur if two or
more management entities try to
use the service at the same time.rw Enumeration .1.3.6.1.4.1.2272.1.69.37.1.9 |
rcCfmTransmitL2IpPingResultOkIndicates the result of the operation:
-true. L2IpPing Message(s) will be/have been sent.
-false. L2IpPing Message(s) will not be sent.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.69.37.1.10 |
rcCfmTransmitL2IpPingPathsFoundThe number of paths found to execute l2ping commandro Integer32 .1.3.6.1.4.1.2272.1.69.37.1.11 |
rcCfmTransmitL2IpPingRowStatusUsed to create/delete entries in the
rcCfmTransmitL2IpPingTable. Deletion of an entry
in this table results in corresponding
rcCfmL2IpPingReplyTable entries being deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.69.37.1.12 |
rcCfmL2IpPingReplyTableThis table contains a list of l2 ip ping replies received SEQUENCE OF RcCfmL2IpPingReplyEntry .1.3.6.1.4.1.2272.1.69.38 |
rcCfmL2IpPingReplyEntryThe L2 Ip Ping Reply table entry. RcCfmL2IpPingReplyEntry .1.3.6.1.4.1.2272.1.69.38.1 |
rcCfmL2IpPingReplyIpAddrTypeThe address type of destination IP Address InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2272.1.69.38.1.1 |
rcCfmL2IpPingReplyIpAddrDestination IP Address. Support ipv4 at this time InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2272.1.69.38.1.2 |
rcCfmL2IpPingReplySendOrderAn index to distinguish among multiple L2Ping sessions
This value is assigned sequentially from 1. It denotes
order that sessions were sent. It correlates to the number
of paths found and stored in the rcCfmTransmitL2IpPingEntry. Integer32 .1.3.6.1.4.1.2272.1.69.38.1.3 |
rcCfmL2IpPingReplyVrfIdVRF IDro Integer32 .1.3.6.1.4.1.2272.1.69.38.1.4 |
rcCfmL2IpPingReplyVlanIdVlan found from L3 lookup and used for transmissionro Integer32 .1.3.6.1.4.1.2272.1.69.38.1.5 |
rcCfmL2IpPingReplyDestMacAddressAn indication of the target MAC Address transmittedro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2272.1.69.38.1.6 |
rcCfmL2IpPingReplyPortNumEither the value '0', or the port number of the
port used for the l2ping.ro InterfaceIndex .1.3.6.1.4.1.2272.1.69.38.1.7 |
rcCfmL2IpPingReplyDestHostNameThe host name of the responding nodero OCTET STRING .1.3.6.1.4.1.2272.1.69.38.1.8 |
rcCfmL2IpPingReplySizeThe number of bytes of data sentro Integer32 .1.3.6.1.4.1.2272.1.69.38.1.9 |
rcCfmL2IpPingReplyPktsTxNumber of Packets transmitted for this vlan/macro Integer32 .1.3.6.1.4.1.2272.1.69.38.1.10 |
rcCfmL2IpPingReplyPktsRxNumber of Packets received for this vlan/macro Integer32 .1.3.6.1.4.1.2272.1.69.38.1.11 |
rcCfmL2IpPingReplyPercentLossWholePercentage of packet loss for this vlan/macro Integer32 .1.3.6.1.4.1.2272.1.69.38.1.12 |
rcCfmL2IpPingReplyPercentLossFractPercentage of packet loss for this vlan/macro Integer32 .1.3.6.1.4.1.2272.1.69.38.1.13 |
rcCfmL2IpPingReplyMinRoundTripMin time for round-trip for this vlan/mac in usro Integer32 .1.3.6.1.4.1.2272.1.69.38.1.14 |
rcCfmL2IpPingReplyMaxRoundTripMax time for round-trip for this vlan/mac in usro Integer32 .1.3.6.1.4.1.2272.1.69.38.1.15 |
rcCfmL2IpPingReplyRttAvgWholeAverage time for round-trip for this vlan/mac in usro Integer32 .1.3.6.1.4.1.2272.1.69.38.1.16 |
rcCfmL2IpPingReplyRttAvgFractFractional portion of Average time for round-tripro Integer32 .1.3.6.1.4.1.2272.1.69.38.1.17 |
rcCfmL2IpPingReplyFlagResult flag indicating status or error code.
Each enum value represents a status or error case.
1 - No error
2 - Internal Error
3 - Invalid Ip
4 - L2Trace completed
5 - Lookup failure for IP (no vlan/mac entries)ro Enumeration .1.3.6.1.4.1.2272.1.69.38.1.18 |
rcCfmTransmitL2IpTraceTableConnectivity Fault Management transmit L2IpTrace table SEQUENCE OF RcCfmTransmitL2IpTraceEntry .1.3.6.1.4.1.2272.1.69.39 |
rcCfmTransmitL2IpTraceEntryL2IpTrace entry. RcCfmTransmitL2IpTraceEntry .1.3.6.1.4.1.2272.1.69.39.1 |
rcCfmTransmitL2IpTraceIpAddrTypeThe address type of destination IP Address InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2272.1.69.39.1.1 |
rcCfmTransmitL2IpTraceIpAddrDestination IP Address. Support ipv4 at this time InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2272.1.69.39.1.2 |
rcCfmTransmitL2IpTraceVrfIdVRF IDro Integer32 .1.3.6.1.4.1.2272.1.69.39.1.3 |
rcCfmTransmitL2IpTraceVrfNameThe Name of the Virtual Routerro DisplayString .1.3.6.1.4.1.2272.1.69.39.1.4 |
rcCfmTransmitL2IpTraceTtlThe number of hops remaining to this L2Trace.
Decremented by 1 by each Bridge that handles the L2Trace.
The decremented value is returned in the L2Trace. If 0
on output, the L2Trace is not transmitted to the next
hop. The value of the TTL Field in the L2Trace
transmitted by the originating MEP is controlled by a
Managed Object; The default value if none is
specified is 64.rw Integer32 .1.3.6.1.4.1.2272.1.69.39.1.5 |
rcCfmTransmitL2IpTraceStatusStatus of the transmit loopback service:
-ready. The service is available.
-transmit. The service is transmitting, or about to
transmit, the L2Trace messages.
-abort The service is aborted or about to abort
the L2Trace messages.
This column will also be used to avoid concurrency or
race condition problems that could occur if two or
more management entities try to
use the service at the same time.rw Enumeration .1.3.6.1.4.1.2272.1.69.39.1.6 |
rcCfmTransmitL2IpTraceResultOkIndicates the result of the operation:
-true. The Trace Message(s) will be/have been sent.
-false. The Trace Message(s) will not be sent.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.69.39.1.7 |
rcCfmTransmitL2IpTracePathsFoundThe number of paths found to execute l2trace commandro Integer32 .1.3.6.1.4.1.2272.1.69.39.1.8 |
rcCfmTransmitL2IpTraceRowStatusUsed to create/delete entries in the
rcCfmTransmitL2IpTraceTable. Deletion of an entry
in this table results in corresponding
rcCfmL2IpTraceReplyTable entries being deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.69.39.1.9 |
rcCfmL2IpTraceReplyTableThis table contains a list of l2 ip trace replies received
by a specific MEP in response to a linktrace message. SEQUENCE OF RcCfmL2IpTraceReplyEntry .1.3.6.1.4.1.2272.1.69.40 |
rcCfmL2IpTraceReplyEntryThe L2 Ip Trace Reply table entry. RcCfmL2IpTraceReplyEntry .1.3.6.1.4.1.2272.1.69.40.1 |
rcCfmL2IpTraceReplyIpAddrTypeThe address type of destination IP Address InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2272.1.69.40.1.1 |
rcCfmL2IpTraceReplyIpAddrDestination IP Address. Support ipv4 at this time InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2272.1.69.40.1.2 |
rcCfmL2IpTraceReplySendOrderAn index to distinguish among multiple L2Trace sessions
This value is assigned sequentially from 1. It denotes
order that sessions were sent. It correlates to the number
of paths found and stored in the rcCfmTransmitL2IpTraceEntry. Integer32 .1.3.6.1.4.1.2272.1.69.40.1.3 |
rcCfmL2IpTraceReplyHopThe number of L2 hops away from L2Trace initiator. Integer32 .1.3.6.1.4.1.2272.1.69.40.1.4 |
rcCfmL2IpTraceReplyReceiveOrderAn index to distinguish among multiple L2Trace responses
with the same Send Transaction Identifier field value.
This value is assigned sequentially from 1, in the order
that the Linktrace Initiator received the responses. A
zero value may be seen in error conditions Integer32 .1.3.6.1.4.1.2272.1.69.40.1.5 |
rcCfmL2IpTraceReplyTtlTtl field value for a returned L2Trace response.ro Integer32 .1.3.6.1.4.1.2272.1.69.40.1.6 |
rcCfmL2IpTraceReplyVrfIdVRF IDro Integer32 .1.3.6.1.4.1.2272.1.69.40.1.7 |
rcCfmL2IpTraceReplyVlanIdVlan found from L3 lookup and used for transmissionro Integer32 .1.3.6.1.4.1.2272.1.69.40.1.8 |
rcCfmL2IpTraceReplyDestMacAddressAn indication of the target MAC Address transmittedro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2272.1.69.40.1.9 |
rcCfmL2IpTraceReplySeqNumberThe transaction identifier/sequence number used in
linktrace message packetro Integer32 .1.3.6.1.4.1.2272.1.69.40.1.10 |
rcCfmL2IpTraceReplyPortNumEither the value '0', or the port number of the
port used for the l2trace.ro InterfaceIndex .1.3.6.1.4.1.2272.1.69.40.1.11 |
rcCfmL2IpTraceReplySrcMacMac address of the MP that responded to L2Trace request for
this L2traceReplyro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2272.1.69.40.1.12 |
rcCfmL2IpTraceReplyHostNameThe host name of the replying nodero OCTET STRING .1.3.6.1.4.1.2272.1.69.40.1.13 |
rcCfmL2IpTraceReplyLastSrcMacThe MAC address of the node that forwarded the
L2Trace to the responding nodero MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2272.1.69.40.1.14 |
rcCfmL2IpTraceReplyLastHostNameThe host name of the node that forwarded the L2Trace
to the responding nodero OCTET STRING .1.3.6.1.4.1.2272.1.69.40.1.15 |
rcCfmL2IpTraceReplyFlagL2Trace result flag indicating status or error code.
Each enum value represents a status or error case.
1 - No error
2 - L2Trace Internal Error
3 - Invalid Mac Address
4 - Mep must be enabled in order to perform L2Trace
5 - No L2Trace response received
6 - L2Trace to own Mep MAC is not sent
7 - L2Trace completed
8 - Lookup failure for L2Tracero Enumeration .1.3.6.1.4.1.2272.1.69.40.1.16 |
rcPlugOptMod OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.71 |
rcPlugOptModTableGibc SFF diagnostic info table SEQUENCE OF RcPlugOptModEntry .1.3.6.1.4.1.2272.1.71.1 |
rcPlugOptModEntryEntry containing info. for a particular port RcPlugOptModEntry .1.3.6.1.4.1.2272.1.71.1.1 |
rcPlugOptModPortIndexAn index value that uniquely identifies a port on a
blade or line-card.ro InterfaceIndex .1.3.6.1.4.1.2272.1.71.1.1.1 |
rcPlugOptModDdmStatusMaskEach bit other than ddm-ok represents a specific error.
Any combination of error bits is allowed.ro Bits .1.3.6.1.4.1.2272.1.71.1.1.2 |
rcPlugOptModCalibrationThe identifier value indicates type of calibration.ro Enumeration .1.3.6.1.4.1.2272.1.71.1.1.3 |
rcPlugOptModPowerMeasureThe identifier value indicates type of external power.ro Enumeration .1.3.6.1.4.1.2272.1.71.1.1.4 |
rcPlugOptModConnectorTypeThe connector type is a 16 character field that
contains ASCII characters, left-aligned and padded
on the right with ASCII spaces. This is an assigned
name that indicates some characteristic of the
layer-1 interface.ro DisplayString .1.3.6.1.4.1.2272.1.71.1.1.5 |
rcPlugOptModVendorNameThe vendor name is a 16 character field that
contains ASCII characters, left-aligned and padded
on the right with ASCII spaces. The vendor name
shall be the full name of the corporation, a
commonly accepted abbreviation of the name, the
SCSI company code, or the stock exchange code for
the corporation.ro DisplayString .1.3.6.1.4.1.2272.1.71.1.1.6 |
rcPlugOptModVendorPartNumberThe vendor part number is a 16 byte field that
contains ASCII characters, left-aligned and padded
on the right with ASCII spaces, defining the vendor
part number or product name.ro DisplayString .1.3.6.1.4.1.2272.1.71.1.1.7 |
rcPlugOptModVendorRevNumberThe vendor revision number is a 4-byte field that
contains ASCII characters, left-aligned and padded
on the right with ASCII spaces, defining the
vendor product revision number.ro DisplayString .1.3.6.1.4.1.2272.1.71.1.1.8 |
rcPlugOptModVendorSNThe vendor serial number is a 16 character field
that contains ASCII characters, left-aligned and
padded on the right with ASCII spaces, defining
the vendor serial number for the transceiver.ro DisplayString .1.3.6.1.4.1.2272.1.71.1.1.9 |
rcPlugOptModVendorDateCodeThe date code is an 8-byte field that contains the
vendor's date code in ASCII. This field is
mandatory and takes the form: YYMMDDLC where
YY is the 2 low order digits of the year (00=2000),
MM is the month, 01 thru 12,
DD is the day, 01 thru 31, and
LC is an optional vendor specific lot code.ro DisplayString .1.3.6.1.4.1.2272.1.71.1.1.10 |
rcPlugOptModPECThis is a 16 byte left-justified ASCII field that
records the Nortel Product Equipment Code order
number for the module. Nortel part numbers are 9
bytes long, so the 10th through 16th byte should
be NULL.ro DisplayString .1.3.6.1.4.1.2272.1.71.1.1.11 |
rcPlugOptModCLEIThis is a 10 byte left-justified ASCII field that
records the Nortel supplied Common Language
Equipment Identifier code for the device. The CLEI
code is a Telcordia human-readable representation
of the 1D barcode.ro DisplayString .1.3.6.1.4.1.2272.1.71.1.1.12 |
rcPlugOptModSupportsDDMThis boolean indicates whether or not the device
supports the DDM capability.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.71.1.1.13 |
rcPlugOptModAux1MonitoringThis value tells what Aux1 is measuring.The values are
as follows:
0 Auxiliary monitoring not implemented
1 APD Bias Voltage mV (units of 10 mV)
2 Reserved
3 TEC Current (mA)
4 Laser Temperature
5 Laser Wavelength
6 +5V Supply Voltage
7 +3.3V Supply Voltage
8 +1.8V Supply Voltage
9 -5.2V Supply Voltage
10 +5.0V Supply Current (unit of 100 uA)
13 +3.3V Supply Current (unit of 100 uA)
14 +1.8V Supply Current (unit of 100 uA)
15 -5.2V Supply Current (unit of 100 uA)ro INTEGER .1.3.6.1.4.1.2272.1.71.1.1.14 |
rcPlugOptModAux2MonitoringThis value tells you what AUX2 is measuring.The values are
as follows:
0 Auxiliary monitoring not implemented
1 APD Bias Voltage mV (units of 10 mV)
2 Reserved
3 TEC Current (mA)
4 Laser Temperature
5 Laser Wavelength
6 +5V Supply Voltage
7 +3.3V Supply Voltage
8 +1.8V Supply Voltage
9 -5.2V Supply Voltage
10 +5.0V Supply Current (unit of 100 uA)
13 +3.3V Supply Current (unit of 100 uA)
14 +1.8V Supply Current (unit of 100 uA)
15 -5.2V Supply Current (unit of 100 uA)ro INTEGER .1.3.6.1.4.1.2272.1.71.1.1.15 |
rcPlugOptModWaveLengthNominal transmitter output wavelength at room
temperature. It is expressed in nano-meters.ro Integer32 .1.3.6.1.4.1.2272.1.71.1.1.16 |
rcPlugOptModTemperatureThis value represents the internally measured
module temperature. It is expressed in units of
1/256 of a degree Celsius and can range from -40C
to +125C with 0.0001 accuracy.The most significant byte is
the signed integer part of the number and the
least significant byte is the fraction.ro INTEGER .1.3.6.1.4.1.2272.1.71.1.1.17 |
rcPlugOptModTemperatureHighAlarmThresholdThis value represents the vendor specified high
temperature threshold. If the device
temperature exceeds this value, a temperature high
is asserted. It is expressed in the same
units as the measured temperature.ro INTEGER .1.3.6.1.4.1.2272.1.71.1.1.18 |
rcPlugOptModTemperatureLowAlarmThresholdThis value represents the vendor specified low
temperature threshold. If the device
temperature falls below this value, a temperature
low is asserted. It is expressed in the same
units as the measured temperature.ro INTEGER .1.3.6.1.4.1.2272.1.71.1.1.19 |
rcPlugOptModTemperatureHighWarningThresholdThis value represents the vendor specified high
temperature warning threshold. If the device
temperature exceeds this value, a temperature high
warning is asserted. It is expressed in the same
units as the measured temperature.ro INTEGER .1.3.6.1.4.1.2272.1.71.1.1.20 |
rcPlugOptModTemperatureLowWarningThresholdThis value represents the vendor specified low
temperature warning threshold. If the device
temperature falls below this value, a temperature
low warning is asserted. It is expressed in the
same units as the measured temperature.ro INTEGER .1.3.6.1.4.1.2272.1.71.1.1.21 |
rcPlugOptModVoltageThis value represents the internally measured
supply voltage. It is a positive number expressed
in microvolts and can range from 0 to 65535 mV.ro INTEGER .1.3.6.1.4.1.2272.1.71.1.1.22 |
rcPlugOptModVoltageHighAlarmThresholdThis value represents the vendor specified high
voltage threshold. If the measured voltage exceeds
this value, a high voltage is asserted. It
is a positive number expressed in microvolts.ro INTEGER .1.3.6.1.4.1.2272.1.71.1.1.23 |
rcPlugOptModVoltageLowAlarmThresholdThis value represents the vendor specified low
voltage threshold. If the measured voltage falls
below this value, a low voltage is asserted.
It is a positive number expressed in microvolts.ro INTEGER .1.3.6.1.4.1.2272.1.71.1.1.24 |
rcPlugOptModVoltageHighWarningThresholdThis value represents the vendor specified high
voltage warning threshold. If the measured voltage
exceeds this value, a high voltage warning is
asserted. It is a positive number expressed in
microvolts.ro INTEGER .1.3.6.1.4.1.2272.1.71.1.1.25 |
rcPlugOptModVoltageLowWarningThresholdThis value represents the vendor specified low
voltage warning threshold. If the measured voltage
falls below this value, a low voltage warning is
asserted. It is a positive number expressed in
microvolts.ro INTEGER .1.3.6.1.4.1.2272.1.71.1.1.26 |
rcPlugOptModBiasThis value represents the internally measured
transmitter laser bias current. It is a positive
number expressed in units of 2 microamps and can
range from 0 to 131 mA with 0.0001 accuracy.ro INTEGER .1.3.6.1.4.1.2272.1.71.1.1.27 |
rcPlugOptModBiasHighAlarmThresholdThis value represents the vendor specified high
current threshold. If the measured bias
current exceeds this value, a high current alarm
is asserted. It is a positive number expressed
in units of 2 microamps and can range from 0 to
131 mA with 0.0001 accuracy.ro INTEGER .1.3.6.1.4.1.2272.1.71.1.1.28 |
rcPlugOptModBiasLowAlarmThresholdThis value represents the vendor specified low
current threshold. If the measured bias
current falls below this value, a low current
is asserted. It is a positive number
expressed in units of 2 microamps and can range
from 0 to 131 mA with 0.0001 accuracy.ro INTEGER .1.3.6.1.4.1.2272.1.71.1.1.29 |
rcPlugOptModBiasHighWarningThresholdThis value represents the vendor specified high
current warning threshold. If the measured bias
current exceeds this value, a high current warning
is asserted. It is a positive number expressed in
units of 2 microamps and can range from 0 to
131 mA with 0.0001 accuracy.ro INTEGER .1.3.6.1.4.1.2272.1.71.1.1.30 |
rcPlugOptModBiasLowWarningThresholdThis value represents the vendor specified low
current warning threshold. If the measured bias
current falls below this value, a low current
warning is asserted. It is a positive number
expressed in units of 2 microamps and can range
from 0 to 131 mA with 0.0001 accuracy.ro INTEGER .1.3.6.1.4.1.2272.1.71.1.1.31 |
rcPlugOptModTxPowerThis value represents the internally measured
coupled TX output power. It is a positive number
expressed in units of micro watts and can range
from 0 to 65.535 mW (-40 to 18.16 dBm).ro INTEGER .1.3.6.1.4.1.2272.1.71.1.1.32 |
rcPlugOptModTxPowerHighAlarmThresholdThis value represents the vendor specified high
transmit power threshold. If the measured
transmitter power exceeds this value, a
transmitter power high is asserted. It is
a positive number expressed in units of micro
watts and can range from 0 to 65.535 mW (-40 to 18.16 dBm).ro INTEGER .1.3.6.1.4.1.2272.1.71.1.1.33 |
rcPlugOptModTxPowerLowAlarmThresholdThis value represents the vendor specified low
transmit power threshold. If the measured
transmitter power falls below this value, a
transmitter power low is asserted. It is a
positive number expressed in units of micro watts
and can range from 0 to 65.535 mW (-40 to 18.16 dBm).ro INTEGER .1.3.6.1.4.1.2272.1.71.1.1.34 |
rcPlugOptModTxPowerHighWarningThresholdThis value represents the vendor specified high
transmit power warning threshold. If the measured
transmitter power exceeds this value, a
transmitter power high warning is asserted. It is
a positive number expressed in units of units of
micro watts and can range from 0 to 65.535 mW (-40 to 18.16 dBm).ro INTEGER .1.3.6.1.4.1.2272.1.71.1.1.35 |
rcPlugOptModTxPowerLowWarningThresholdThis value represents the vendor specified low
transmit power warning threshold. If the measured
transmitter power falls below this value, a
transmitter power low warning is asserted. It is
a positive number expressed in units of micro
watts and can range from 0 to 65.535 mW (-40 to 18.16 dBm).ro INTEGER .1.3.6.1.4.1.2272.1.71.1.1.36 |
rcPlugOptModRxPowerThis value represents the internally measured
received power. It is a positive number expressed
in units of micro watts and can range from 0 to
65.535 mW (-40 to 18.16 dBm).ro INTEGER .1.3.6.1.4.1.2272.1.71.1.1.37 |
rcPlugOptModRxPowerHighAlarmThresholdThis value represents the vendor specified high
receiver power threshold. If the measured
received power exceeds this value, a receiver
power high is asserted. It is a positive
number expressed in units of micro watts and can
range from 0 to 65.535 mW (-40 to 18.16 dBm).ro INTEGER .1.3.6.1.4.1.2272.1.71.1.1.38 |
rcPlugOptModRxPowerLowAlarmThresholdThis value represents the vendor specified low
receiver power threshold. If the measured
received power falls below this value, a receiver
power low is asserted. It is a positive
number expressed in units of micro watts and can
range from 0 to 65.535 mW (-40 to 18.16 dBm).ro INTEGER .1.3.6.1.4.1.2272.1.71.1.1.39 |
rcPlugOptModRxPowerHighWarningThresholdThis value represents the vendor specified high
receiver power warning threshold. If the measured
received power exceeds this value, a receiver
power high warning is asserted. It is a positive
number expressed in units of units of micro watts
and can range from 0 to 65.535 uW (-40 to 18.16 dBm).ro INTEGER .1.3.6.1.4.1.2272.1.71.1.1.40 |
rcPlugOptModRxPowerLowWarningThresholdThis value represents the vendor specified low
receiver power warning threshold. If the measured
received power falls below this value, a receiver
power low warning is asserted. It is a positive
number expressed in units of units of micro watts
and can range from 0 to 65.535 mW (-40 to 18.16 dBm).ro INTEGER .1.3.6.1.4.1.2272.1.71.1.1.41 |
rcPlugOptModAux1This represents the internally measured A/D
value specified.ro INTEGER .1.3.6.1.4.1.2272.1.71.1.1.42 |
rcPlugOptModAux1HighAlarmThresholdThis value represents the vendor specified high
Aux1 threshold.ro INTEGER .1.3.6.1.4.1.2272.1.71.1.1.43 |
rcPlugOptModAux1LowAlarmThresholdThis value represents the vendor specified low
Aux1 threshold.ro INTEGER .1.3.6.1.4.1.2272.1.71.1.1.44 |
rcPlugOptModAux1HighWarningThresholdThis value represents the vendor specified high
Aux1 warning threshold.ro INTEGER .1.3.6.1.4.1.2272.1.71.1.1.45 |
rcPlugOptModAux1LowWarningThresholdThis value represents the vendor specified low
Aux1 warning threshold.ro INTEGER .1.3.6.1.4.1.2272.1.71.1.1.46 |
rcPlugOptModAux2This represents the internally measured A/D
value specified.ro INTEGER .1.3.6.1.4.1.2272.1.71.1.1.47 |
rcPlugOptModAux2HighAlarmThresholdThis value represents the vendor specified high
Aux1 threshold.ro INTEGER .1.3.6.1.4.1.2272.1.71.1.1.48 |
rcPlugOptModAux2LowAlarmThresholdThis value represents the vendor specified low
Aux1 threshold.ro INTEGER .1.3.6.1.4.1.2272.1.71.1.1.49 |
rcPlugOptModAux2HighWarningThresholdThis value represents the vendor specified high
Aux1 warning threshold.ro INTEGER .1.3.6.1.4.1.2272.1.71.1.1.50 |
rcPlugOptModAux2LowWarningThresholdThis value represents the vendor specified low
Aux1 warning threshold.ro INTEGER .1.3.6.1.4.1.2272.1.71.1.1.51 |
rcPlugOptModTemperatureStatusUsed to indicate the current temperature statusro Enumeration .1.3.6.1.4.1.2272.1.71.1.1.52 |
rcPlugOptModVoltageStatusUsed to indicate the current voltage statusro Enumeration .1.3.6.1.4.1.2272.1.71.1.1.53 |
rcPlugOptModBiasStatusUsed to indicate the current laser bias statusro Enumeration .1.3.6.1.4.1.2272.1.71.1.1.54 |
rcPlugOptModTxPowerStatusUsed to indicate the current transmitter power
statusro Enumeration .1.3.6.1.4.1.2272.1.71.1.1.55 |
rcPlugOptModRxPowerStatusUsed to indicate the current receiver power statusro Enumeration .1.3.6.1.4.1.2272.1.71.1.1.56 |
rcPlugOptModAux1StatusUsed to indicate the current Aux1 statusro Enumeration .1.3.6.1.4.1.2272.1.71.1.1.57 |
rcPlugOptModAux2StatusUsed to indicate the current Aux2 statusro Enumeration .1.3.6.1.4.1.2272.1.71.1.1.58 |
rcPlugOptModScalars OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.71.2 |
rcPlugOptModDdmMonitorEnable/disable the global polling monitor for DDMrw EnableValue .1.3.6.1.4.1.2272.1.71.2.1 |
rcPlugOptModDdmMonitorIntervalIndicate the interval in which the DDM alert registers is polledrw INTEGER .1.3.6.1.4.1.2272.1.71.2.2 |
rcPlugOptModDdmTrapSendEnable/disable the global ddm trap send to SNMP managerrw EnableValue .1.3.6.1.4.1.2272.1.71.2.3 |
rcPlugOptModDdmAlarmPortdownEnable/disable the global portdown option when ddm alarm occursrw EnableValue .1.3.6.1.4.1.2272.1.71.2.4 |
rcVrrp OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.73 |
rcVrrpMib OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.73.1 |
rcVrrpObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.73.1.1 |
rcVrrpScalars OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.73.1.1.1 |
rcVrrpPingVirtualAddrEnableUsed to configure whether this device should respond to
pings directed to a virtual router's IP address.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.73.1.1.1.1 |
rcVrrpTrapStateTransitionTypePotential types of state transitions.
Used by rcVrrpTrapStateTransition trap.ro Enumeration .1.3.6.1.4.1.2272.1.73.1.1.1.2 |
rcVrrpTrapStateTransitionCausePotential types of causes that will
generate a rcVrrpTrapStateTransition trap.ro Enumeration .1.3.6.1.4.1.2272.1.73.1.1.1.3 |
rcVrrpOperTableOperations table for a VRRP router which consists of a
sequence (i.e., one or more conceptual rows) of
'rcVrrpOperEntry' items. SEQUENCE OF RcVrrpOperEntry .1.3.6.1.4.1.2272.1.73.1.1.2 |
rcVrrpOperEntryAn entry in the rcVrrpOperTable containing the operational
characteristics of a virtual router. On a VRRP router,
a given virtual router is identified by a combination
of the IF index and VRID. RcVrrpOperEntry .1.3.6.1.4.1.2272.1.73.1.1.2.1 |
rcVrrpOperIfIndexport interface index. InterfaceIndexOrZero .1.3.6.1.4.1.2272.1.73.1.1.2.1.1 |
rcVrrpOperVrIdThis object contains the Virtual Router Identifier (VRID).ro VrId (VRRP-MIB) .1.3.6.1.4.1.2272.1.73.1.1.2.1.2 |
rcVrrpOperIpAddrThe assigned IP addresses that a virtual router is responsible
for backing up.rw IpAddress .1.3.6.1.4.1.2272.1.73.1.1.2.1.3 |
rcVrrpOperVirtualMacAddrThe virtual MAC address of the virtual router. This is derived
as follows: 00-00-5E-00-01-<VRID>.
Where the first three octets consist of the IANA's OUI; The
next two octets indicate the address block of the VRRP protocol;
and the remaining octets consist of the VRID.
Although this object can be derived from the 'rcVrrpOperVrId'
object, it is included here, for completeness, so that it
is easily obtainable by a management application and can be
included in VRRP-related SNMP traps.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2272.1.73.1.1.2.1.4 |
rcVrrpOperStateThe current state of the virtual router.ro Enumeration .1.3.6.1.4.1.2272.1.73.1.1.2.1.5 |
rcVrrpOperControlThis object will enable/disable the virtual router
function. Setting the value to 'enabled', will transition
the state of the router from 'initialize to 'backup';
Setting the value to 'disabled', will tranisition the
router from 'master' or 'backup' to 'initialize'.rw Enumeration .1.3.6.1.4.1.2272.1.73.1.1.2.1.6 |
rcVrrpOperPriorityThis object specifies the priority for the virtual
router (e.g., master election) with respect to other
virtual routers that are backing up a one or more
associated IP addresses. Higher values imply higher
priority.
A priority of '0', although not settable, is used
to indicate that this router has ceased to particpate
in VRRP and a backup virtual router should transition \
to become a new master.
A priority of 255 is used for the router that owns the
associated IP address(es).rw Integer32 .1.3.6.1.4.1.2272.1.73.1.1.2.1.7 |
rcVrrpOperIpAddrCountThe number of IP addresses that are associated with this
virtual router. This number is equal to the number of rows
in the vrrpAssoIpAddrTable that correspond to a given IF
index/VRID pair.ro Integer32 .1.3.6.1.4.1.2272.1.73.1.1.2.1.8 |
rcVrrpOperMasterIpAddrThe master router's real (primary) IP address. This is
the IP address listed as the source in VRRP advertisement
last received by this virtual routerro IpAddress .1.3.6.1.4.1.2272.1.73.1.1.2.1.9 |
rcVrrpOperAuthTypeAuthentication type used for VRRP protocol exchanges between
virtual routers.rw Enumeration .1.3.6.1.4.1.2272.1.73.1.1.2.1.10 |
rcVrrpOperAuthKeyThe Authentication Key. If the virtual router's Authorization
Type is 'simpleTextPassword', and the key length is shorter
than 8 octets, the agent will left adjust and zero fill
to 8 octets.
When read, rcVrrpOperAuthKey always returns an Octet String
of length zero.rw OCTET STRING .1.3.6.1.4.1.2272.1.73.1.1.2.1.11 |
rcVrrpOperHMACMD5KeyThe Authentication Key. If the virtual router's 'Authorization
Type' is 'ipAuthenticationHeader', and the key length is shorter
than 16 octets, the agent will left adjust and zero fill
to 16 octets.
When read, rcVrrpOperHMACMD5Key always returns an Octet String
of length zero.rw OCTET STRING .1.3.6.1.4.1.2272.1.73.1.1.2.1.12 |
rcVrrpOperAdvertisementIntervalThis is the time interval, in seconds, between sending
advertisement messages. Only the master router sends
VRRP advertisements.rw Integer32 .1.3.6.1.4.1.2272.1.73.1.1.2.1.13 |
rcVrrpOperPreemptModeControls whether a higher priority virtual router will
preempt a lower priority master.rw Enumeration .1.3.6.1.4.1.2272.1.73.1.1.2.1.14 |
rcVrrpOperVirtualRouterUpTimeThis is the time interval (in hundredths of a second)
since this virtual router was initialized.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2272.1.73.1.1.2.1.15 |
rcVrrpOperRowStatusThe row status variable, used according to installation
and removal conventions for conceptual rows. Setting this
object to 'createAndGo' results in enabling the VRRP
protocol for this virtual router. The information required
to actually create the conceptual row may be included in
the SET primitive or may be initialized by the agent on
the virtual router. Destroying the entry or setting it to
'notInService' disables VRRP on this virtual router.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.73.1.1.2.1.16 |
rcVrrpOperCriticalIpAddrIP address of the interface that will cause a
shutdown event.rw IpAddress .1.3.6.1.4.1.2272.1.73.1.1.2.1.17 |
rcVrrpOperHoldDownTimerUsed to configure the amount of time (in seconds)
to wait before preempting the current vrrp master.rw INTEGER .1.3.6.1.4.1.2272.1.73.1.1.2.1.18 |
rcVrrpOperHoldDownStateUsed to indicate the hold-down state of this vrrp
interface. If the hold-down timer is operational
this variable will be set to 'active'. 'dormant'
otherwise.ro Enumeration .1.3.6.1.4.1.2272.1.73.1.1.2.1.19 |
rcVrrpOperHoldDownTimeRemainingUsed to indicate the amount of time (in seconds)
left before the rcVrrpOperHoldDownTimer will expire.ro INTEGER .1.3.6.1.4.1.2272.1.73.1.1.2.1.20 |
rcVrrpOperActionUsed to trigger an action on this vrrp interface.rw Enumeration .1.3.6.1.4.1.2272.1.73.1.1.2.1.21 |
rcVrrpOperCriticalIpAddrEnableIndicate if an user-defined critical IP address should be
enabled. 'NO' = use the default IP address (0.0.0.0).
No effect if an user-defined IP address does not exist.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.73.1.1.2.1.22 |
rcVrrpOperBackUpMasterEnable the backup VRRP switch traffic forwarding.
This will reduce the traffic in IST link in the time of SMLT.rw Enumeration .1.3.6.1.4.1.2272.1.73.1.1.2.1.23 |
rcVrrpOperBackUpMasterStateIndicate whether backup VRRP switch traffic forwarding is enabled or not.ro Enumeration .1.3.6.1.4.1.2272.1.73.1.1.2.1.24 |
rcVrrpOperFasterAdvIntervalThis is the faster advertisement interval, in
milliseconds, between sending advertisement messages. When the faster advertisement interval enable is checked, the faster advertisement interval is being used instead of the regular advertisement intervalrw Integer32 .1.3.6.1.4.1.2272.1.73.1.1.2.1.25 |
rcVrrpOperFasterAdvIntervalEnableUsed to indicate if the Faster Advertisement Interval should be used. 'Disable' means use regular Advertisement interval.rw Enumeration .1.3.6.1.4.1.2272.1.73.1.1.2.1.26 |
rcVrrpRouterStatsTableTable of virtual router statistics. SEQUENCE OF RcVrrpRouterStatsEntry .1.3.6.1.4.1.2272.1.73.1.1.3 |
rcVrrpRouterStatsEntryAn entry in the table, containing statistics information
about a given virtual router. RcVrrpRouterStatsEntry .1.3.6.1.4.1.2272.1.73.1.1.3.1 |
rcVrrpStatsIfIndexport interface index.ro Integer32 .1.3.6.1.4.1.2272.1.73.1.1.3.1.1 |
rcVrrpStatsVrIdThis object contains the Virtual Router Identifier (VRID).ro VrId (VRRP-MIB) .1.3.6.1.4.1.2272.1.73.1.1.3.1.2 |
rcVrrpStatsBecomeMasterThe total number of times that this virtual router's state
has transitioned from BACKUP to MASTER.ro Counter32 .1.3.6.1.4.1.2272.1.73.1.1.3.1.3 |
rcVrrpStatsAdvertiseRcvdThe total number of VRRP advertisements received by this
virtual router.ro Counter32 .1.3.6.1.4.1.2272.1.73.1.1.3.1.4 |
rcVrrpStatsAdvertiseIntervalErrorsThe total number of VRRP advertisement packets received
for which the advertisement interval is different than the
one configured for the local virtual router.ro Counter32 .1.3.6.1.4.1.2272.1.73.1.1.3.1.5 |
rcVrrpStatsPasswdSecurityViolationsThe total number of VRRP packets received that do not pass
the simple text password authentification check.ro Counter32 .1.3.6.1.4.1.2272.1.73.1.1.3.1.6 |
rcVrrpStatsHmacSecurityViolationsThe total number of VRRP packets received that do not pass
the HMAC-MD5-96 authentification check.ro Counter32 .1.3.6.1.4.1.2272.1.73.1.1.3.1.7 |
rcVrrpStatsIpTtlErrorsThe total number of VRRP packets received by the virtual
router with IP TTL (Time-To-Live) not equal to 255.ro Counter32 .1.3.6.1.4.1.2272.1.73.1.1.3.1.8 |
rcVrrpStatsPriorityZeroPktsRcvdThe total number of VRRP packets received by the virtual
router with a priority of '0'.ro Counter32 .1.3.6.1.4.1.2272.1.73.1.1.3.1.9 |
rcVrrpStatsPriorityZeroPktsSentThe total number of VRRP packets sent by the virtual router
with a priority of '0'.ro Counter32 .1.3.6.1.4.1.2272.1.73.1.1.3.1.10 |
rcVrrpStatsInvalidTypePktsRcvdThe number of VRRP packets received by the virtual router
with an invalid value in the 'type' field.ro Counter32 .1.3.6.1.4.1.2272.1.73.1.1.3.1.11 |
rcVrrpStatsAddressListErrorsPackets received address list the address list does not
match the locally configured list for the virtual router.ro Counter32 .1.3.6.1.4.1.2272.1.73.1.1.3.1.12 |
rcVrrpStatsUnknownAuthTypePackets received with an unknown authentication type.ro Counter32 .1.3.6.1.4.1.2272.1.73.1.1.3.1.13 |
rcVrrpStatsAuthTypeErrorsPackets received with 'Auth Type' not equal to the locally
configured authentication method ('vrrpOperAuthType').ro Counter32 .1.3.6.1.4.1.2272.1.73.1.1.3.1.14 |
rcVrrpNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.73.1.2 |
rcVrrpTrapStateTransitionA rcVrrpTrapStateTransition trap signifies a state
transition has occurred on a particular vrrp interface.
Implementation of this trap is optional. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.73.1.2.1 |
rcMpls OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.74 |
rcMplsMib OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.74.1 |
rcMplsNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.74.1.0 |
rcMplsObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.74.1.1 |
rcMplsGlobalGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.74.1.1.1 |
rcMplsGlobalScalars OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.74.1.1.1.1 |
rcMplsRouterIdIP address of the circuitless interface to be used as router-idrw IpAddress .1.3.6.1.4.1.2272.1.74.1.1.1.1.1 |
rcMplsLdpAdminStatusState of global LDP - enabled or disabledrw EnableValue .1.3.6.1.4.1.2272.1.74.1.1.1.1.2 |
rcMplsLdpPenultimateHopPopState of global LDP Penultimate Hop Popping.rw Enumeration .1.3.6.1.4.1.2272.1.74.1.1.1.1.3 |
rcMplsLdpHelloHoldTimerThe global Hello Hold Time in seconds.rw Unsigned32 .1.3.6.1.4.1.2272.1.74.1.1.1.1.4 |
rcMplsLdpSessionKeepAliveThe global Session Keep alive in seconds.rw Unsigned32 .1.3.6.1.4.1.2272.1.74.1.1.1.1.5 |
rcMplsLdpPathVectorLimitThe global path vector limit.rw Integer32 .1.3.6.1.4.1.2272.1.74.1.1.1.1.6 |
rcMplsLdpHopCountLimitThe global loop detect hop count limit.rw Integer32 .1.3.6.1.4.1.2272.1.74.1.1.1.1.7 |
rcMplsLdpEgressPolicyStatusState of LDP Egress-policy enabled or disabledrw EnableValue .1.3.6.1.4.1.2272.1.74.1.1.1.1.8 |
rcMplsRsvpAdminStatusState of global RSVP - enabled or disabledrw EnableValue .1.3.6.1.4.1.2272.1.74.1.1.1.1.9 |
rcMplsRsvpPenultimateHopPopState of global RSVP Penultimate Hop Popping.rw Enumeration .1.3.6.1.4.1.2272.1.74.1.1.1.1.10 |
rcMplsRsvpHelloIntervalThe global RSVP hello interval.rw Unsigned32 .1.3.6.1.4.1.2272.1.74.1.1.1.1.11 |
rcMplsRsvpRefreshReductionState of global RSVP refresh reduction - enabled or disabledrw EnableValue .1.3.6.1.4.1.2272.1.74.1.1.1.1.12 |
rcMplsRsvpRefreshIntervalThe global value for RSVP refresh interval.rw Unsigned32 .1.3.6.1.4.1.2272.1.74.1.1.1.1.13 |
rcMplsRsvpRefreshMultiplierThe global value for RSVP refresh multiplier.rw Unsigned32 .1.3.6.1.4.1.2272.1.74.1.1.1.1.14 |
rcMplsRsvpMessageBundlingState of global RSVP message bundling - enabled or disabledrw EnableValue .1.3.6.1.4.1.2272.1.74.1.1.1.1.15 |
rcMplsLspIngressStartLabelThe global ingress rsp start label.rw Integer32 .1.3.6.1.4.1.2272.1.74.1.1.1.1.16 |
rcMplsLspEgressStartLabelThe global egress rsp start label.rw Integer32 .1.3.6.1.4.1.2272.1.74.1.1.1.1.17 |
rcMplsLspIngressPktEnableEnable/Disable ingress rsp pkt lsp statsrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.74.1.1.1.1.18 |
rcMplsLspEgressPktEnableEnable/Disable egress rsp pkt lsp statsrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.74.1.1.1.1.19 |
rcMplsLdpClearStatsClear global LDP Statistics.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.74.1.1.1.1.20 |
rcMplsRsvpClearStatsClear global RSVP Statistics.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.74.1.1.1.1.21 |
rcMplsLspClearStatsClear 'transmit' or 'receive' lsp statistics.rw Enumeration .1.3.6.1.4.1.2272.1.74.1.1.1.1.22 |
rcMplsIpStaticFecTableThis is the table of ip-static fec mappings for both
RSVP and LDP . SEQUENCE OF RcMplsIpStaticFecEntry .1.3.6.1.4.1.2272.1.74.1.1.1.2 |
rcMplsIpStaticFecEntryA static fec mapping to an rsvp lsp or ldp egress IP address. RcMplsIpStaticFecEntry .1.3.6.1.4.1.2272.1.74.1.1.1.2.1 |
rcMplsIpStaticFecDestThe statically-configured destination IP address. IpAddress .1.3.6.1.4.1.2272.1.74.1.1.1.2.1.1 |
rcMplsIpStaticFecMaskThe statically-configured destination IP mask. IpAddress .1.3.6.1.4.1.2272.1.74.1.1.1.2.1.2 |
rcMplsIpStaticFecTunnelNameThe rsvp lsp tunnel name associated with
rcMplsIpStaticFecTunnelId. This field will be
null if the value of rcMplsIpStaticFecTunnelId is 0.rw DisplayString .1.3.6.1.4.1.2272.1.74.1.1.1.2.1.3 |
rcMplsIpStaticFecTunnelIdThe rsvp lsp tunnel index (from mplsTunnelTable
defined in rfc3812) if this is an rsvp Ip statically
mapped address. This field will be 0 if this is an
LDP Egress Address mapping.rw MplsTunnelIndex (MPLS-TC-STD-MIB) .1.3.6.1.4.1.2272.1.74.1.1.1.2.1.4 |
rcMplsIpStaticFecEgressAddrThe LDP Egress IP Address.
This field will be 0 if this is an rsvp
tunnel fec mapping.rw IpAddress .1.3.6.1.4.1.2272.1.74.1.1.1.2.1.5 |
rcMplsIpStaticFecEgressMaskThe LDP Egress IP Mask.
This field will be 0 if this is an rsvp
tunnel fec mapping.rw IpAddress .1.3.6.1.4.1.2272.1.74.1.1.1.2.1.6 |
rcMplsIpStaticFecStateIndicates the actual operational status of this
static fec.ro Enumeration .1.3.6.1.4.1.2272.1.74.1.1.1.2.1.7 |
rcMplsIpStaticFecRowStatusThis variable is used to create, modify, and/or
delete a row in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.74.1.1.1.2.1.8 |
rcMplsIpFtnTableThis is the table of mpls Ip FTN. SEQUENCE OF RcMplsIpFtnEntry .1.3.6.1.4.1.2272.1.74.1.1.1.3 |
rcMplsIpFtnEntryAn mpls FTN entry . RcMplsIpFtnEntry .1.3.6.1.4.1.2272.1.74.1.1.1.3.1 |
rcMplsIpFtnDestThe FTN destination IP address. IpAddress .1.3.6.1.4.1.2272.1.74.1.1.1.3.1.1 |
rcMplsIpFtnMaskThe FTN destination IP mask. IpAddress .1.3.6.1.4.1.2272.1.74.1.1.1.3.1.2 |
rcMplsIpFtnTypeThe FTN next hop label type.ro Enumeration .1.3.6.1.4.1.2272.1.74.1.1.1.3.1.3 |
rcMplsIpFtnOutLabelThe FTN outgoing label.ro MplsLabel (MPLS-TC-STD-MIB) .1.3.6.1.4.1.2272.1.74.1.1.1.3.1.4 |
rcMplsIpFtnOutIfIndexThe index value which uniquely identifies the
interface to which this entry is applicable. The
interface identified by a particular value of this
index is the same interface as identified by the
same value of ifIndex.ro InterfaceIndex .1.3.6.1.4.1.2272.1.74.1.1.1.3.1.5 |
rcMplsIpFtnNextHopThe FTN next hop Ip Address.ro IpAddress .1.3.6.1.4.1.2272.1.74.1.1.1.3.1.6 |
rcMplsIpIlmTableThis is the table of mpls Incoming Label Mapping. SEQUENCE OF RcMplsIpIlmEntry .1.3.6.1.4.1.2272.1.74.1.1.1.4 |
rcMplsIpIlmEntryAn mpls Incoming Label Map entry . RcMplsIpIlmEntry .1.3.6.1.4.1.2272.1.74.1.1.1.4.1 |
rcMplsIpIlmInLabelThe Incoming Label. MplsLabel (MPLS-TC-STD-MIB) .1.3.6.1.4.1.2272.1.74.1.1.1.4.1.1 |
rcMplsIpIlmInIfIndexThe index value which uniquely identifies the
incoming interface to which this entry is applicable. The
interface identified by a particular value of this
index is the same interface as identified by the
same value of ifIndex.ro InterfaceIndex .1.3.6.1.4.1.2272.1.74.1.1.1.4.1.2 |
rcMplsIpIlmOutLabelThe Outgoing Label.ro MplsLabel (MPLS-TC-STD-MIB) .1.3.6.1.4.1.2272.1.74.1.1.1.4.1.3 |
rcMplsIpIlmOutIfIndexThe index value which uniquely identifies the
outgoing interface to which this entry is applicable. The
interface identified by a particular value of this
index is the same interface as identified by the
same value of ifIndex.ro InterfaceIndex .1.3.6.1.4.1.2272.1.74.1.1.1.4.1.4 |
rcMplsIpIlmNextHopThe next hop Ip Address.ro IpAddress .1.3.6.1.4.1.2272.1.74.1.1.1.4.1.5 |
rcMplsIngressLspStatTableThis is the table of mpls Incoming Label Stats. SEQUENCE OF RcMplsIngressLspStatEntry .1.3.6.1.4.1.2272.1.74.1.1.1.5 |
rcMplsIngressLspStatEntryAn mpls Incoming Label Stat entry . RcMplsIngressLspStatEntry .1.3.6.1.4.1.2272.1.74.1.1.1.5.1 |
rcMplsIngressLspPortThe incoming port for the lsp. INTEGER .1.3.6.1.4.1.2272.1.74.1.1.1.5.1.1 |
rcMplsIngressLspLabelThe Incoming Lsp Label. MplsLabel (MPLS-TC-STD-MIB) .1.3.6.1.4.1.2272.1.74.1.1.1.5.1.2 |
rcMplsIngressLspPktsCount of incoming packets for the corresponding lsp and port.ro Counter64 .1.3.6.1.4.1.2272.1.74.1.1.1.5.1.3 |
rcMplsEgressLspStatTableThis is the table of mpls OutGoing Label Stats. SEQUENCE OF RcMplsEgressLspStatEntry .1.3.6.1.4.1.2272.1.74.1.1.1.6 |
rcMplsEgressLspStatEntryAn mpls OutGoing Label Stat entry . RcMplsEgressLspStatEntry .1.3.6.1.4.1.2272.1.74.1.1.1.6.1 |
rcMplsEgressLspPortThe OutGoing port for the lsp. INTEGER .1.3.6.1.4.1.2272.1.74.1.1.1.6.1.1 |
rcMplsEgressLspLabelThe OutGoing Lsp Label. MplsLabel (MPLS-TC-STD-MIB) .1.3.6.1.4.1.2272.1.74.1.1.1.6.1.2 |
rcMplsEgressLspPktsCount of outgoing packets for the corresponding lsp and port.ro Counter64 .1.3.6.1.4.1.2272.1.74.1.1.1.6.1.3 |
rcMplsRsvpGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.74.1.1.2 |
rcMplsRsvpSummaryGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.74.1.1.2.1 |
rcMplsRsvpSummaryVersionThis is the RSVP version number.ro Unsigned32 .1.3.6.1.4.1.2272.1.74.1.1.2.1.1 |
rcMplsRsvpSummaryStateThis is the RSVP protocol state.ro EnableValue .1.3.6.1.4.1.2272.1.74.1.1.2.1.2 |
rcMplsRsvpSummaryLSPRetryTimerThis is the retry timer (secs) for the LSPs
starting from this node, in case of failure.
A value of zero means no retry on LSPs.ro Unsigned32 UNITS "seconds" .1.3.6.1.4.1.2272.1.74.1.1.2.1.3 |
rcMplsRsvpSummaryLSPRetryLimitThis is the retry limit for the LSPs starting
from this node. It indicates how many times
an LSP is retried before giving up.
A value of zero means try infinitely.ro Unsigned32 .1.3.6.1.4.1.2272.1.74.1.1.2.1.4 |
rcMplsRsvpSummaryLSPDecayRateThis is the decay rate (percent) for LSPs
starting on this node.ro Unsigned32 .1.3.6.1.4.1.2272.1.74.1.1.2.1.5 |
rcMplsRsvpSummaryPHPThis is the configured RSVP PHP support on
this node. Possible values are implicit-null,
explicit-null, or disabled.ro Enumeration .1.3.6.1.4.1.2272.1.74.1.1.2.1.6 |
rcMplsRsvpTunnelExtTableThis is the table of mpls rsvp tunnels. This table
supplements the mplsTunnelTable from rfc3812. SEQUENCE OF RcMplsRsvpTunnelExtEntry .1.3.6.1.4.1.2272.1.74.1.1.2.2 |
rcMplsRsvpTunnelExtEntryAn entry in the mpls tunnel table. RcMplsRsvpTunnelExtEntry .1.3.6.1.4.1.2272.1.74.1.1.2.2.1 |
rcMplsRsvpTunnelExtIndexThe Tunnel Index. The value of this object
should mimic the value of mplsTunnelIndex of the
MplsTunnelEntry of the mpls tunnel for which
this extended tunnel table entry row applies. MplsTunnelIndex (MPLS-TC-STD-MIB) .1.3.6.1.4.1.2272.1.74.1.1.2.2.1.1 |
rcMplsRsvpTunnelExtInstanceThe Tunnel Instance. The value of this object
should mimic the value of mplsTunnelInstance of the
MplsTunnelEntry of the mpls tunnel for which
this extended tunnel table entry row applies. MplsTunnelInstanceIndex (MPLS-TC-STD-MIB) .1.3.6.1.4.1.2272.1.74.1.1.2.2.1.2 |
rcMplsRsvpTunnelExtIngressLSRIdThe Rsvp Tunnel Ingress LSR Id. The value of
this object should mimic the value of the
mplsTunnelIngressLSRId of the
MplsTunnelEntry of the mpls tunnel for which
this extended tunnel table entry row applies. MplsExtendedTunnelId (MPLS-TC-STD-MIB) .1.3.6.1.4.1.2272.1.74.1.1.2.2.1.3 |
rcMplsRsvpTunnelExtEgressLSRIdThe Rsvp Tunnel Egress LSR Id. The value of
this object should mimic the value of the
mplsTunnelEgressLSRId of the
MplsTunnelEntry of the mpls tunnel for which
this extended tunnel table entry row applies. MplsExtendedTunnelId (MPLS-TC-STD-MIB) .1.3.6.1.4.1.2272.1.74.1.1.2.2.1.4 |
rcMplsRsvpTunnelExtNameThe Name of the tunnel associated with this LSP.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.2272.1.74.1.1.2.2.1.5 |
rcMplsRsvpTunnelExtSwitchoverSwitch this LSP from active status to inactive
status or vice versa.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.74.1.1.2.2.1.6 |
rcMplsRsvpTunnelExtActiveStatusThis is 'true' if this is the active LSP of the tunnel.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.74.1.1.2.2.1.7 |
rcMplsRsvpTunnelExtResStyleThis is the reservation style of the tunnel.ro SnmpAdminString .1.3.6.1.4.1.2272.1.74.1.1.2.2.1.8 |
rcMplsRsvpTunnelExtLspIdThis is the LSP Id of this LSP.ro MplsLSPID (MPLS-TC-STD-MIB) .1.3.6.1.4.1.2272.1.74.1.1.2.2.1.9 |
rcMplsRsvpTunnelExtEROThis is the Explicit Route associated with this LSP.ro SnmpAdminString .1.3.6.1.4.1.2272.1.74.1.1.2.2.1.10 |
rcMplsRsvpTunnelExtRROThis is the Recorded Route associated with this LSP.ro SnmpAdminString .1.3.6.1.4.1.2272.1.74.1.1.2.2.1.11 |
rcMplsRsvpTunnelExtInIfIndexThis is the incoming interface for the LSP. This
applies to rows with mplsTunnelRole set to
transit(2) or tail(3).ro InterfaceIndex .1.3.6.1.4.1.2272.1.74.1.1.2.2.1.12 |
rcMplsRsvpTunnelExtInLabelThis is the incoming Mpls Label. This
applies to rows with mplsTunnelRole set to
transit(2) or tail(3).ro MplsLabel (MPLS-TC-STD-MIB) .1.3.6.1.4.1.2272.1.74.1.1.2.2.1.13 |
rcMplsRsvpTunnelExtInNeighborThis address of the previous-hop (upstream)
router. This applies to rows with mplsTunnelRole
set to transit(2) or tail(3).ro IpAddress .1.3.6.1.4.1.2272.1.74.1.1.2.2.1.14 |
rcMplsRsvpTunnelExtOutIfIndexThis is the outgoing interface for the LSP. This
applies to rows with mplsTunnelRole set to
head(1) or transit(2).ro InterfaceIndex .1.3.6.1.4.1.2272.1.74.1.1.2.2.1.15 |
rcMplsRsvpTunnelExtOutLabelThis is the outgoing Mpls Label. This
applies to rows with mplsTunnelRole set to
head(1) or transit(2).ro MplsLabel (MPLS-TC-STD-MIB) .1.3.6.1.4.1.2272.1.74.1.1.2.2.1.16 |
rcMplsRsvpTunnelExtOutNeighborThis address of the next-hop (downstream)
router. This applies to rows with
applies to rows with mplsTunnelRole set to
head(1) or transit(2).ro IpAddress .1.3.6.1.4.1.2272.1.74.1.1.2.2.1.17 |
rcMplsRsvpTunnelExtTSpecRateThis is the primary LSP TSpec Rate.
This applies to rows with mplsTunnelRole set to
transit(2) or tail(3).ro Unsigned32 .1.3.6.1.4.1.2272.1.74.1.1.2.2.1.18 |
rcMplsRsvpTunnelExtTSpecSizeThis is the primary LSP TSpec Size.
This applies to rows with mplsTunnelRole set to
transit(2) or tail(3).ro Unsigned32 .1.3.6.1.4.1.2272.1.74.1.1.2.2.1.19 |
rcMplsRsvpTunnelExtTSpecPeakThis is the primary LSP TSpec Peak.
This applies to rows with mplsTunnelRole set to
transit(2) or tail(3).ro Unsigned32 .1.3.6.1.4.1.2272.1.74.1.1.2.2.1.20 |
rcMplsRsvpTunnelExtTSpecMinThis is the primary LSP TSpec Min.
This applies to rows with mplsTunnelRole set to
transit(2) or tail(3).ro Unsigned32 .1.3.6.1.4.1.2272.1.74.1.1.2.2.1.21 |
rcMplsRsvpTunnelExtTSpecMaxThis is the primary lsp TSpec Max.
This applies to rows with mplsTunnelRole set to
transit(2) or tail(3).ro Unsigned32 .1.3.6.1.4.1.2272.1.74.1.1.2.2.1.22 |
rcMplsRsvpTunnelExtInstanceUpTimeThis is the time (in 100ths of a second)
that this instance has been in the Oper 'Up'
state. When the instance transitions out of
the Oper 'Up' state the time is reset to
zero.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2272.1.74.1.1.2.2.1.23 |
rcMplsRsvpTunnelExtLSPUpTimeThis is the time (in 100ths of a second)
that all instances of this LSP have been in
the Oper Up state. The time is calculated
based on the create time of the first instance
of the LSP to go to the Oper 'Up' state. When
all instances of this LSP have transitioned
out of the Oper 'Up' state the time is reset
to zero.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2272.1.74.1.1.2.2.1.24 |
rcMplsRsvpNeighborTableThis is the table of mpls rsvp neighbors. SEQUENCE OF RcMplsRsvpNeighborEntry .1.3.6.1.4.1.2272.1.74.1.1.2.3 |
rcMplsRsvpNeighborEntryAn entry in the mpls rsvp tunnel table. RcMplsRsvpNeighborEntry .1.3.6.1.4.1.2272.1.74.1.1.2.3.1 |
rcMplsRsvpNeighborAddressThis is the address of a learned neighbor. IpAddress .1.3.6.1.4.1.2272.1.74.1.1.2.3.1.1 |
rcMplsRsvpNeighborHelloStateThis is the state of hello exchange with
the neighbor.ro SnmpAdminString .1.3.6.1.4.1.2272.1.74.1.1.2.3.1.2 |
rcMplsRsvpNeighborIfIndexThis is the interface index of the neighbor.ro InterfaceIndex .1.3.6.1.4.1.2272.1.74.1.1.2.3.1.3 |
rcMplsRsvpNeighborTimeThis is the time the neighbor was learned.ro Integer32 .1.3.6.1.4.1.2272.1.74.1.1.2.3.1.4 |
rcMplsRsvpNeighborPeriodThis is the RSVP Hello Interval.ro Integer32 .1.3.6.1.4.1.2272.1.74.1.1.2.3.1.5 |
rcMplsRsvpNeighborSendCntThis is the number of Hello packets sent
to the neighbor.ro Integer32 .1.3.6.1.4.1.2272.1.74.1.1.2.3.1.6 |
rcMplsRsvpNeighborRcvCntThis is the number of Hellp packets received
from the neighbor.ro Integer32 .1.3.6.1.4.1.2272.1.74.1.1.2.3.1.7 |
rcMplsRsvpNeighborLocalInstanceThis is the identification sent to the remote
router during Hello message exchange.ro Integer32 .1.3.6.1.4.1.2272.1.74.1.1.2.3.1.8 |
rcMplsRsvpNeighborRemoteInstanceThis is the identification provided by the
remote router during Hello message exchange.ro Integer32 .1.3.6.1.4.1.2272.1.74.1.1.2.3.1.9 |
rcMplsRsvpNeighborCreationTimeThis is the time the neighbor instance was created.ro Integer32 .1.3.6.1.4.1.2272.1.74.1.1.2.3.1.10 |
rcMplsRsvpNeighborLastPktRxTimeThis is the time that the last Hello message
was received from the remote router.ro Integer32 .1.3.6.1.4.1.2272.1.74.1.1.2.3.1.11 |
rcMplsRsvpNeighborRefReductionThis is the refresh-reduction status between the
local router and the neighbor.ro SnmpAdminString .1.3.6.1.4.1.2272.1.74.1.1.2.3.1.12 |
rcMplsRsvpInterfaceTableThis is the table of mpls rsvp interfaces. SEQUENCE OF RcMplsRsvpInterfaceEntry .1.3.6.1.4.1.2272.1.74.1.1.2.4 |
rcMplsRsvpInterfaceEntryAn entry in the mpls rsvp interface table. RcMplsRsvpInterfaceEntry .1.3.6.1.4.1.2272.1.74.1.1.2.4.1 |
rcMplsRsvpInterfaceIfIndexThis is the interface index. InterfaceIndex .1.3.6.1.4.1.2272.1.74.1.1.2.4.1.1 |
rcMplsRsvpInterfaceAddressThis is the address of the interface.ro IpAddress .1.3.6.1.4.1.2272.1.74.1.1.2.4.1.2 |
rcMplsRsvpInterfaceRefreshIntervalThis is the RSVP refresh interval for the
interface(seconds).ro Unsigned32 .1.3.6.1.4.1.2272.1.74.1.1.2.4.1.3 |
rcMplsRsvpInterfaceRefreshMultThis is the configured RSVP refresh
multiplier for the interface(seconds).ro Unsigned32 .1.3.6.1.4.1.2272.1.74.1.1.2.4.1.4 |
rcMplsRsvpInterfaceHelloIntervalThis is the configured RSVP Hello Interval
of the interface (seconds).ro Unsigned32 .1.3.6.1.4.1.2272.1.74.1.1.2.4.1.5 |
rcMplsRsvpInterfaceRefreshReductionThis is the configured RSVP refresh reduction
support on the interface.ro Unsigned32 .1.3.6.1.4.1.2272.1.74.1.1.2.4.1.6 |
rcMplsRsvpInterfaceMessageBundlingThis indicates state of message bundling on the interface.ro Unsigned32 .1.3.6.1.4.1.2272.1.74.1.1.2.4.1.7 |
rcMplsRsvpStatsTableThis is the table of mpls rsvp statistics. SEQUENCE OF RcMplsRsvpStatsEntry .1.3.6.1.4.1.2272.1.74.1.1.2.5 |
rcMplsRsvpStatsEntryAn entry in the mpls rsvp statistics table. RcMplsRsvpStatsEntry .1.3.6.1.4.1.2272.1.74.1.1.2.5.1 |
rcMplsRsvpStatsIfIndexThis is the interface index. This value can be 0 or
a valid interface index. When 0 the global rsvp
statistics are retrieved. InterfaceIndex .1.3.6.1.4.1.2272.1.74.1.1.2.5.1.1 |
rcMplsRsvpStatsPathRcvThis is the path received count.ro Counter32 .1.3.6.1.4.1.2272.1.74.1.1.2.5.1.2 |
rcMplsRsvpStatsPathSentThis is the path sent count.ro Counter32 .1.3.6.1.4.1.2272.1.74.1.1.2.5.1.3 |
rcMplsRsvpStatsPathErrRcvThis is the path error receives count.ro Counter32 .1.3.6.1.4.1.2272.1.74.1.1.2.5.1.4 |
rcMplsRsvpStatsPathErrSentThis is the path error sent count.ro Counter32 .1.3.6.1.4.1.2272.1.74.1.1.2.5.1.5 |
rcMplsRsvpStatsPathTearRcvThis is the path tear receives count.ro Counter32 .1.3.6.1.4.1.2272.1.74.1.1.2.5.1.6 |
rcMplsRsvpStatsPathTearSentThis is the path tear sent count.ro Counter32 .1.3.6.1.4.1.2272.1.74.1.1.2.5.1.7 |
rcMplsRsvpStatsResvRcvThis is the reservation received count.ro Counter32 .1.3.6.1.4.1.2272.1.74.1.1.2.5.1.8 |
rcMplsRsvpStatsResvSentThis is the reservation sent count.ro Counter32 .1.3.6.1.4.1.2272.1.74.1.1.2.5.1.9 |
rcMplsRsvpStatsResvErrRcvThis is the reservation error receives count.ro Counter32 .1.3.6.1.4.1.2272.1.74.1.1.2.5.1.10 |
rcMplsRsvpStatsResvErrSentThis is the reservation error sent count.ro Counter32 .1.3.6.1.4.1.2272.1.74.1.1.2.5.1.11 |
rcMplsRsvpStatsResvTearRcvThis is the resv tear receives count.ro Counter32 .1.3.6.1.4.1.2272.1.74.1.1.2.5.1.12 |
rcMplsRsvpStatsResvTearSentThis is the resv tear sent count.ro Counter32 .1.3.6.1.4.1.2272.1.74.1.1.2.5.1.13 |
rcMplsRsvpStatsConfTearRcvThis is the conf tear receives count.ro Counter32 .1.3.6.1.4.1.2272.1.74.1.1.2.5.1.14 |
rcMplsRsvpStatsConfTearSentThis is the conf tear sent count.ro Counter32 .1.3.6.1.4.1.2272.1.74.1.1.2.5.1.15 |
rcMplsRsvpStatsAckRcvThis is the acks receives count.ro Counter32 .1.3.6.1.4.1.2272.1.74.1.1.2.5.1.16 |
rcMplsRsvpStatsAckSentThis is the acks sent count.ro Counter32 .1.3.6.1.4.1.2272.1.74.1.1.2.5.1.17 |
rcMplsRsvpStatsSRefreshRcvThis is the summary refresh receives count.ro Counter32 .1.3.6.1.4.1.2272.1.74.1.1.2.5.1.18 |
rcMplsRsvpStatsSRefreshSentThis is the summary refresh sent count.ro Counter32 .1.3.6.1.4.1.2272.1.74.1.1.2.5.1.19 |
rcMplsRsvpStatsHelloReqRcvThis is the hello request receives count.ro Counter32 .1.3.6.1.4.1.2272.1.74.1.1.2.5.1.20 |
rcMplsRsvpStatsHelloReqSentThis is the hello request sent count.ro Counter32 .1.3.6.1.4.1.2272.1.74.1.1.2.5.1.21 |
rcMplsRsvpStatsHelloAckRcvThis is the hello ack receives count.ro Counter32 .1.3.6.1.4.1.2272.1.74.1.1.2.5.1.22 |
rcMplsRsvpStatsHelloAckSentThis is the hello ack sent count.ro Counter32 .1.3.6.1.4.1.2272.1.74.1.1.2.5.1.23 |
rcMplsRsvpStatsBadIpHdrThis is the count of pkts with bad IP Header.ro Counter32 .1.3.6.1.4.1.2272.1.74.1.1.2.5.1.24 |
rcMplsRsvpStatsBadVersionThis is the count of pkts with Bad Version.ro Counter32 .1.3.6.1.4.1.2272.1.74.1.1.2.5.1.25 |
rcMplsRsvpStatsBadRsvpLenThis is the count of pkts with Bad Rsvp length.ro Counter32 .1.3.6.1.4.1.2272.1.74.1.1.2.5.1.26 |
rcMplsRsvpStatsBadCksumThis is the count of pkts with Bad Checksum.ro Counter32 .1.3.6.1.4.1.2272.1.74.1.1.2.5.1.27 |
rcMplsRsvpStatsBadMsgTypeThis is the count of pkts with Bad Message type.ro Counter32 .1.3.6.1.4.1.2272.1.74.1.1.2.5.1.28 |
rcMplsRsvpStatsBadMsgFormThis is the count of pkts with Bad Message Form.ro Counter32 .1.3.6.1.4.1.2272.1.74.1.1.2.5.1.29 |
rcMplsRsvpStatsBadIntfThis is the count of pkts received on a
Bad Interface.ro Counter32 .1.3.6.1.4.1.2272.1.74.1.1.2.5.1.30 |
rcMplsLdpGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.74.1.1.3 |
rcMplsLdpSummaryGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.74.1.1.3.1 |
rcMplsLdpSummaryIntAdjCountThis is the LDP summary index.ro Unsigned32 .1.3.6.1.4.1.2272.1.74.1.1.3.1.1 |
rcMplsLdpSummaryExtAdjCountThis is the LDP summary index.ro Unsigned32 .1.3.6.1.4.1.2272.1.74.1.1.3.1.2 |
rcMplsLdpSummarySessionCountThis is the LDP summary session count.ro Unsigned32 .1.3.6.1.4.1.2272.1.74.1.1.3.1.3 |
rcMplsLdpSummaryRouteCountThis is the LDP summary route count.ro Unsigned32 .1.3.6.1.4.1.2272.1.74.1.1.3.1.4 |
rcMplsLdpSummaryLdpIdThis is the LDP summary Local LDP Id.ro MplsLdpIdentifier (MPLS-TC-STD-MIB) .1.3.6.1.4.1.2272.1.74.1.1.3.1.5 |
rcMplsLdpSummaryLspCountThis is the LDP summary LSP count.ro Unsigned32 .1.3.6.1.4.1.2272.1.74.1.1.3.1.6 |
rcMplsLdpSummaryInSegCountThis is the LDP summary in segment count.ro Unsigned32 .1.3.6.1.4.1.2272.1.74.1.1.3.1.7 |
rcMplsLdpSummaryOutSegCountThis is the LDP summary out segment count.ro Unsigned32 .1.3.6.1.4.1.2272.1.74.1.1.3.1.8 |
rcMplsLdpSummaryRedistConnThis is the LDP policy redist enable flag.ro EnableValue .1.3.6.1.4.1.2272.1.74.1.1.3.1.9 |
rcMplsLdpDiscoveryTableThis is the table of mpls ldp discoveries. SEQUENCE OF RcMplsLdpDiscoveryEntry .1.3.6.1.4.1.2272.1.74.1.1.3.2 |
rcMplsLdpDiscoveryEntryAn entry in the mpls ldp discovery table. RcMplsLdpDiscoveryEntry .1.3.6.1.4.1.2272.1.74.1.1.3.2.1 |
rcMplsLdpDiscoveryIfIndexThis is the interface index. InterfaceIndex .1.3.6.1.4.1.2272.1.74.1.1.3.2.1.1 |
rcMplsLdpDiscoveryPeerLdpIdThis is the peer ldp id. MplsLdpIdentifier (MPLS-TC-STD-MIB) .1.3.6.1.4.1.2272.1.74.1.1.3.2.1.2 |
rcMplsLdpDiscoveryPeerTransportAddrThis is the peer transport address to which
an LDP session has been provisioned.ro IpAddress .1.3.6.1.4.1.2272.1.74.1.1.3.2.1.3 |
rcMplsLdpDiscoveryNegotiatedHoldTimeThis is the hold time negotiated between peers.ro Unsigned32 .1.3.6.1.4.1.2272.1.74.1.1.3.2.1.4 |
rcMplsLdpDiscoveryConfSeqNumThis is the configured sequence number sent
by the peer.ro Unsigned32 .1.3.6.1.4.1.2272.1.74.1.1.3.2.1.5 |
rcMplsLdpDiscoveryExtendedDiscoveryIf set to 1, extended discovery is enabled.
If set to 0, basic discovery is enabled.ro Unsigned32 .1.3.6.1.4.1.2272.1.74.1.1.3.2.1.6 |
rcMplsLdpPathTableThis is the table of mpls LDP Paths between
a local peer and a remote peer. SEQUENCE OF RcMplsLdpPathEntry .1.3.6.1.4.1.2272.1.74.1.1.3.3 |
rcMplsLdpPathEntryAn entry in the mpls ldp path table. RcMplsLdpPathEntry .1.3.6.1.4.1.2272.1.74.1.1.3.3.1 |
rcMplsLdpPathTypeThis is the path type.
ATG_NHR_LDP_FEC_TYPE_NONE 0
ATG_NHR_LDP_FEC_TYPE_HOST 1
ATG_NHR_LDP_FEC_TYPE_PREFIX 2
ATG_NHR_LDP_FEC_TYPE_VC 3
ATG_NHR_LDP_FEC_TYPE_VC_GEN_ID 4. Enumeration .1.3.6.1.4.1.2272.1.74.1.1.3.3.1.1 |
rcMplsLdpPathAddrTypeThis is the path address type. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2272.1.74.1.1.3.3.1.2 |
rcMplsLdpPathAddrPrefixLengthThis is the path address prefix length. InetAddressPrefixLength (INET-ADDRESS-MIB) .1.3.6.1.4.1.2272.1.74.1.1.3.3.1.3 |
rcMplsLdpPathAddrThis is the path address. InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2272.1.74.1.1.3.3.1.4 |
rcMplsLdpPathInLabelThis is the path address prefix length.ro MplsLabel (MPLS-TC-STD-MIB) .1.3.6.1.4.1.2272.1.74.1.1.3.3.1.5 |
rcMplsLdpPathRemotePeerTableThis is the table of LDP paths to a given
remote peer. SEQUENCE OF RcMplsLdpPathRemotePeerEntry .1.3.6.1.4.1.2272.1.74.1.1.3.4 |
rcMplsLdpPathRemotePeerEntryAn entry in the mpls ldp path remote
peer table. RcMplsLdpPathRemotePeerEntry .1.3.6.1.4.1.2272.1.74.1.1.3.4.1 |
rcMplsLdpPathRemotePeerTypeThis is the path type.
ATG_NHR_LDP_FEC_TYPE_NONE 0
ATG_NHR_LDP_FEC_TYPE_HOST 1
ATG_NHR_LDP_FEC_TYPE_PREFIX 2
ATG_NHR_LDP_FEC_TYPE_VC 3
ATG_NHR_LDP_FEC_TYPE_VC_GEN_ID 4. Enumeration .1.3.6.1.4.1.2272.1.74.1.1.3.4.1.1 |
rcMplsLdpPathRemotePeerAddrTypeThis is the type of the path address. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2272.1.74.1.1.3.4.1.2 |
rcMplsLdpPathRemotePeerAddrPrefixLengthThis is the path address prefix length. InetAddressPrefixLength (INET-ADDRESS-MIB) .1.3.6.1.4.1.2272.1.74.1.1.3.4.1.3 |
rcMplsLdpPathRemotePeerAddrThis is the path address. InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2272.1.74.1.1.3.4.1.4 |
rcMplsLdpPathRemotePeerIdThis is the Id of the remote peer of the path. INTEGER .1.3.6.1.4.1.2272.1.74.1.1.3.4.1.5 |
rcMplsLdpPathRemotePeerLdpIdThis is the LDP Id of the remote peer of the path.ro MplsLdpIdentifier (MPLS-TC-STD-MIB) .1.3.6.1.4.1.2272.1.74.1.1.3.4.1.6 |
rcMplsLdpPathRemotePeerOutLabelThis is the Out Label for this instance
of the Remote Peer Id.ro MplsLabel (MPLS-TC-STD-MIB) .1.3.6.1.4.1.2272.1.74.1.1.3.4.1.7 |
rcMplsLdpPathRemotePeerStateThis is the state of the remote peer.ro Enumeration .1.3.6.1.4.1.2272.1.74.1.1.3.4.1.8 |
rcMplsLdpRouteTableThis is the table of mpls ldp routes. SEQUENCE OF RcMplsLdpRouteEntry .1.3.6.1.4.1.2272.1.74.1.1.3.5 |
rcMplsLdpRouteEntryAn entry in the mpls ldp route table. RcMplsLdpRouteEntry .1.3.6.1.4.1.2272.1.74.1.1.3.5.1 |
rcMplsLdpRouteTypeThis is the route type.
ATG_NHR_LDP_FEC_TYPE_NONE 0
ATG_NHR_LDP_FEC_TYPE_HOST 1
ATG_NHR_LDP_FEC_TYPE_PREFIX 2
ATG_NHR_LDP_FEC_TYPE_VC 3
ATG_NHR_LDP_FEC_TYPE_VC_GEN_ID 4. Enumeration .1.3.6.1.4.1.2272.1.74.1.1.3.5.1.1 |
rcMplsLdpRouteAddrTypeThis is the route address prefix length. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2272.1.74.1.1.3.5.1.2 |
rcMplsLdpRouteAddrPrefixLengthThis is the route address prefix length. InetAddressPrefixLength (INET-ADDRESS-MIB) .1.3.6.1.4.1.2272.1.74.1.1.3.5.1.3 |
rcMplsLdpRouteAddrThis is the route address. InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2272.1.74.1.1.3.5.1.4 |
rcMplsLdpRouteIfIndexThis is the interface index of the route entry.ro InterfaceIndex .1.3.6.1.4.1.2272.1.74.1.1.3.5.1.5 |
rcMplsLdpRouteNextHopAddrTypeThis is the address type of the next hop.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2272.1.74.1.1.3.5.1.6 |
rcMplsLdpRouteNextHopAddrThis is the address of the next hop.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2272.1.74.1.1.3.5.1.7 |
rcMplsLdpSessionTableThis is the table of mpls ldp sessions. SEQUENCE OF RcMplsLdpSessionEntry .1.3.6.1.4.1.2272.1.74.1.1.3.6 |
rcMplsLdpSessionEntryAn entry in the mpls ldp session table. RcMplsLdpSessionEntry .1.3.6.1.4.1.2272.1.74.1.1.3.6.1 |
rcMplsLdpSessionEntityLdpIdThis is the entity LDP ID for the session. MplsLdpIdentifier (MPLS-TC-STD-MIB) .1.3.6.1.4.1.2272.1.74.1.1.3.6.1.1 |
rcMplsLdpSessionEntityIndexThis is the entity LDP ID for the session. IndexInteger (DIFFSERV-MIB) .1.3.6.1.4.1.2272.1.74.1.1.3.6.1.2 |
rcMplsLdpSessionPeerLdpIdThis is the peer LDP ID for the session. MplsLdpIdentifier (MPLS-TC-STD-MIB) .1.3.6.1.4.1.2272.1.74.1.1.3.6.1.3 |
rcMplsLdpSessionStateLastChangeThe time this Session entered its current state
as denoted by the rcMplsLdpSessionState object.ro Unsigned32 .1.3.6.1.4.1.2272.1.74.1.1.3.6.1.4 |
rcMplsLdpSessionStateThe current state of the session, all of the
states 1 to 5 are based on the state machine
for session negotiation behavior
1- nonexistent, 2- initialized, 3- openrec, 4- opensent, 5- operational.ro Enumeration .1.3.6.1.4.1.2272.1.74.1.1.3.6.1.5 |
rcMplsLdpSessionRoleDuring session establishment the LSR/LER takes either
the active role or the passive role based on address
comparisons. This object indicates whether this LSR/LER
was behaving in an active role or passive role during
this session's establishment, 1- unknown, 2- active, 3- passive.
The value of unknown(1), indicates that the role is not
able to be determined at the present time.ro Enumeration .1.3.6.1.4.1.2272.1.74.1.1.3.6.1.6 |
rcMplsLdpSessionProtocolVersionThis is the protocol version.ro Unsigned32 .1.3.6.1.4.1.2272.1.74.1.1.3.6.1.7 |
rcMplsLdpSessionKeepAliveHoldTimeRemThis is the session keep alive hold time remaining.ro Integer32 .1.3.6.1.4.1.2272.1.74.1.1.3.6.1.8 |
rcMplsLdpSessionKeepAliveTimeThis is the session keep alive time.ro Unsigned32 .1.3.6.1.4.1.2272.1.74.1.1.3.6.1.9 |
rcMplsLdpSessionMaxPduLengthThis is the session's max pdu length.ro Unsigned32 .1.3.6.1.4.1.2272.1.74.1.1.3.6.1.10 |
rcMplsLdpSessionDiscontinuityTimeThis is the session's discontinuity time.ro Integer32 .1.3.6.1.4.1.2272.1.74.1.1.3.6.1.11 |
rcMplsLdpSessionHoldTimeThis is the session's hold time.ro Unsigned32 .1.3.6.1.4.1.2272.1.74.1.1.3.6.1.12 |
rcMplsLdpSessionUpTimeThis is the session's up time.ro Integer32 .1.3.6.1.4.1.2272.1.74.1.1.3.6.1.13 |
rcMplsLdpSessionMessagesSentThis is the session total messages sent.ro Counter32 .1.3.6.1.4.1.2272.1.74.1.1.3.6.1.14 |
rcMplsLdpSessionMessagesRecvThis is the session total messages received.ro Counter32 .1.3.6.1.4.1.2272.1.74.1.1.3.6.1.15 |
rcMplsLdpInterfaceTableThis is the table of mpls ldp interface. SEQUENCE OF RcMplsLdpInterfaceEntry .1.3.6.1.4.1.2272.1.74.1.1.3.7 |
rcMplsLdpInterfaceEntryAn entry in the mpls ldp interface table. RcMplsLdpInterfaceEntry .1.3.6.1.4.1.2272.1.74.1.1.3.7.1 |
rcMplsLdpInterfaceIfIndexThis is the LDP interface if index. InterfaceIndex .1.3.6.1.4.1.2272.1.74.1.1.3.7.1.1 |
rcMplsLdpInterfaceNbrCountThis is the number of neighbors.ro Unsigned32 .1.3.6.1.4.1.2272.1.74.1.1.3.7.1.2 |
rcMplsLdpInterfaceNextHelloThis is the next hello time.ro Unsigned32 .1.3.6.1.4.1.2272.1.74.1.1.3.7.1.3 |
rcMplsLdpInterfaceConfHoldTimeThis is the configured hello hold time.ro Unsigned32 .1.3.6.1.4.1.2272.1.74.1.1.3.7.1.4 |
rcMplsLdpInterfaceNegHoldTimeThis is the negotiated hello hold time.ro Unsigned32 .1.3.6.1.4.1.2272.1.74.1.1.3.7.1.5 |
rcMplsLdpInterfaceHelloIntervalThis is one third of the negotiated hello hold time.ro Unsigned32 .1.3.6.1.4.1.2272.1.74.1.1.3.7.1.6 |
rcMplsLdpStatsTableThis is the table of mpls ldp statistics. SEQUENCE OF RcMplsLdpStatsEntry .1.3.6.1.4.1.2272.1.74.1.1.3.8 |
rcMplsLdpStatsEntryAn entry in the mpls ldp statistics table. RcMplsLdpStatsEntry .1.3.6.1.4.1.2272.1.74.1.1.3.8.1 |
rcMplsLdpStatsPeerAddressThis is the LDP Peer Address key for search. This value
can be a valid peer address or 0.0.0.0. If 0.0.0.0
then global LDP statistics are retrieved. IpAddress .1.3.6.1.4.1.2272.1.74.1.1.3.8.1.1 |
rcMplsLdpStatsNotifyRecvThis is the count of notifications received.ro Counter32 .1.3.6.1.4.1.2272.1.74.1.1.3.8.1.2 |
rcMplsLdpStatsNotifySentThis is the count of notifications sent.ro Counter32 .1.3.6.1.4.1.2272.1.74.1.1.3.8.1.3 |
rcMplsLdpStatsHelloRecvThis is the count of hellos received.ro Counter32 .1.3.6.1.4.1.2272.1.74.1.1.3.8.1.4 |
rcMplsLdpStatsHelloSentThis is the count of hellos sent.ro Counter32 .1.3.6.1.4.1.2272.1.74.1.1.3.8.1.5 |
rcMplsLdpStatsInitRecvThis is the count of initializations received.ro Counter32 .1.3.6.1.4.1.2272.1.74.1.1.3.8.1.6 |
rcMplsLdpStatsInitSentThis is the count of initializations sent.ro Counter32 .1.3.6.1.4.1.2272.1.74.1.1.3.8.1.7 |
rcMplsLdpStatsKeepRecvThis is the count of keep alives received.ro Counter32 .1.3.6.1.4.1.2272.1.74.1.1.3.8.1.8 |
rcMplsLdpStatsKeepSentThis is the count of keep alives sent.ro Counter32 .1.3.6.1.4.1.2272.1.74.1.1.3.8.1.9 |
rcMplsLdpStatsAddrRecvThis is the count of addrs received.ro Counter32 .1.3.6.1.4.1.2272.1.74.1.1.3.8.1.10 |
rcMplsLdpStatsAddrSentThis is the count of addrs sent.ro Counter32 .1.3.6.1.4.1.2272.1.74.1.1.3.8.1.11 |
rcMplsLdpStatsAddrWdrRecvThis is the count of addr withdraws received.ro Counter32 .1.3.6.1.4.1.2272.1.74.1.1.3.8.1.12 |
rcMplsLdpStatsAddrWdrSentThis is the count of addr withdraws sent.ro Counter32 .1.3.6.1.4.1.2272.1.74.1.1.3.8.1.13 |
rcMplsLdpStatsLabelMapRecvThis is the count of label maps received.ro Counter32 .1.3.6.1.4.1.2272.1.74.1.1.3.8.1.14 |
rcMplsLdpStatsLabelMapSentThis is the count of label maps sent.ro Counter32 .1.3.6.1.4.1.2272.1.74.1.1.3.8.1.15 |
rcMplsLdpStatsLabelReqRecvThis is the count of label reqs received.ro Counter32 .1.3.6.1.4.1.2272.1.74.1.1.3.8.1.16 |
rcMplsLdpStatsLabelReqSentThis is the count of label reqs sent.ro Counter32 .1.3.6.1.4.1.2272.1.74.1.1.3.8.1.17 |
rcMplsLdpStatsLabelWdrRecvThis is the count of label withdraws received.ro Counter32 .1.3.6.1.4.1.2272.1.74.1.1.3.8.1.18 |
rcMplsLdpStatsLabelWdrSentThis is the count of label withdraws sent.ro Counter32 .1.3.6.1.4.1.2272.1.74.1.1.3.8.1.19 |
rcMplsLdpStatsLabelRelRecvThis is the count of label withdraws received.ro Counter32 .1.3.6.1.4.1.2272.1.74.1.1.3.8.1.20 |
rcMplsLdpStatsLabelRelSentThis is the count of label withdraws sent.ro Counter32 .1.3.6.1.4.1.2272.1.74.1.1.3.8.1.21 |
rcMplsLdpStatsLabelAbrRecvThis is the count of label aborts received.ro Counter32 .1.3.6.1.4.1.2272.1.74.1.1.3.8.1.22 |
rcMplsLdpStatsLabelAbrSentThis is the count of label aborts sent.ro Counter32 .1.3.6.1.4.1.2272.1.74.1.1.3.8.1.23 |
rcMplsLdpStatsSessionUpThis is the count of session up.ro Counter32 .1.3.6.1.4.1.2272.1.74.1.1.3.8.1.24 |
rcMplsLdpStatsSessionDownThis is the count of session down.ro Counter32 .1.3.6.1.4.1.2272.1.74.1.1.3.8.1.25 |
rcMplsLdpStatsBadLdpIdentifierErrorsThis is the count of bad LDP ID errors.ro Counter32 .1.3.6.1.4.1.2272.1.74.1.1.3.8.1.26 |
rcMplsLdpStatsBadPduLengthErrorsThis is the count of Bad PDU length
errors.ro Counter32 .1.3.6.1.4.1.2272.1.74.1.1.3.8.1.27 |
rcMplsLdpStatsBadMessageLengthErrorsThis is the count of bad message length
errors.ro Counter32 .1.3.6.1.4.1.2272.1.74.1.1.3.8.1.28 |
rcMplsLdpStatsUnknownMessageErrorsThis is the count of unknown message
errors.ro Counter32 .1.3.6.1.4.1.2272.1.74.1.1.3.8.1.29 |
rcMplsLdpStatsUnknownTlvErrorsThis is the count of unknown TLV errors.ro Counter32 .1.3.6.1.4.1.2272.1.74.1.1.3.8.1.30 |
rcMplsLdpStatsBadTlvLengthErrorsThis is the count of bad TLV Length errors.ro Counter32 .1.3.6.1.4.1.2272.1.74.1.1.3.8.1.31 |
rcMplsLdpStatsMalformedTlvValueErrorsThis is the count of Malinformed TLV
value errors.ro Counter32 .1.3.6.1.4.1.2272.1.74.1.1.3.8.1.32 |
rcMplsLdpStatsHoldTimerExpErrorsThis is the count of hold time
expired errors.ro Counter32 .1.3.6.1.4.1.2272.1.74.1.1.3.8.1.33 |
rcMplsLdpStatsSessionRejectedNoHelloErrorsThis is the count of session reject -
no hello errors.ro Counter32 .1.3.6.1.4.1.2272.1.74.1.1.3.8.1.34 |
rcMplsLdpStatsSessionRejectedBadParmAdvErrorsThis is the count of session reject -
bad parameter advertisement errors.ro Counter32 .1.3.6.1.4.1.2272.1.74.1.1.3.8.1.35 |
rcMplsLdpStatsSessionRejectedMaxPduErrorsThis is the count of session reject -
Max PDU Errors.ro Counter32 .1.3.6.1.4.1.2272.1.74.1.1.3.8.1.36 |
rcMplsLdpStatsSessionRejectedBadLabelRangeErrorsThis is the count of session reject -
Bad Label Range errors.ro Counter32 .1.3.6.1.4.1.2272.1.74.1.1.3.8.1.37 |
rcMplsLdpStatsSessionRejectedSetupAbortErrorsThis is the count of session reject -
Setup Abort errors.ro Counter32 .1.3.6.1.4.1.2272.1.74.1.1.3.8.1.38 |
rcMplsLdpStatsSessionRejectedBadKeepaliveErrorsThis is the count of session reject -
Bad Keepalive Errors.ro Counter32 .1.3.6.1.4.1.2272.1.74.1.1.3.8.1.39 |
rcMplsLdpStatsSessionOtherErrorsThis is the count of other errors.ro Counter32 .1.3.6.1.4.1.2272.1.74.1.1.3.8.1.40 |
rcMplsNotificationObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.74.1.2 |
rcMplsLdpStatusNotificationEnableIf this object is true, then it enables the
generation of LDP Session Up or Down Traps,
otherwise these traps are not emitted.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.74.1.2.1 |
rcMplsLdpSessionThresholdNotificationEnableIf this object is true, then it enables the
generation of LDP Session Threshold Exceeded Traps,
otherwise these traps are not emitted.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.74.1.2.2 |
rcMplsLdpPathVectorLimitNotificationEnableIf this object is true, then it enables the
generation of LDP Path Vector Limit Exceeded Traps,
otherwise these traps are not emitted.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.74.1.2.3 |
rcIpMRoute OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.76 |
rcIpMRouteMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.76.1 |
rcIpMRouteScalars OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.76.1.1 |
rcIpMRouteStatsEnabledThe enabled status of IP Multicast statistics.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.76.1.1.2 |
rcIpMRouteStatsClearClear ip mroute stats.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.76.1.1.3 |
rcIpMRouteStatsTablethe table containing IP Multicast statistics. SEQUENCE OF RcIpMRouteStatsEntry .1.3.6.1.4.1.2272.1.76.1.6 |
rcIpMRouteStatsEntryAn entry containing the ip multicast statistics
information for the specific group ip address. RcIpMRouteStatsEntry .1.3.6.1.4.1.2272.1.76.1.6.1 |
rcIpMRouteStatsGroupAddressthe IP multicast group address for which this entry
contains ip multicast statistics. IpAddress .1.3.6.1.4.1.2272.1.76.1.6.1.1 |
rcIpMRouteStatsSourceCountThe number of sources corresponding to the specific group and vrf.ro Counter32 .1.3.6.1.4.1.2272.1.76.1.6.1.2 |
rcIpMRouteStatsPktsThe total number of frames that are processed
corresponding to the specific group and vrf.ro Counter64 .1.3.6.1.4.1.2272.1.76.1.6.1.3 |
rcIpMRouteStatsBytesThe total number of bytes that are processed
corresponding to the specific group and vrf.ro Counter64 .1.3.6.1.4.1.2272.1.76.1.6.1.4 |
rcIpMRouteStatsAverageSizePerPktThe average length of packets that are processed
corresponding to the specific group and vrf.ro Integer32 .1.3.6.1.4.1.2272.1.76.1.6.1.5 |
rcIpMRouteStatsDropPktsThe total number of drop frames that are processed
corresponding to the specific group and vrf.ro Counter64 .1.3.6.1.4.1.2272.1.76.1.6.1.6 |
rcIpMRouteStatsDropBytesThe total number of drop bytes that are processed
corresponding to the specific group and vrf.ro Counter64 .1.3.6.1.4.1.2272.1.76.1.6.1.7 |
rcIpMRouteStatsPktsPerSecondThe number of packets that are processed
corresponding to the specific group and vrf in one second.ro Integer32 .1.3.6.1.4.1.2272.1.76.1.6.1.8 |
rcPlsb OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.78 |
rcPlsbGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.78.1 |
rcPlsbGlobalVlansPLSB vlan entry.rw OCTET STRING .1.3.6.1.4.1.2272.1.78.1.1 |
rcPlsbGlobalEnableEnable/Disable PLSB global flag.rw EnableValue .1.3.6.1.4.1.2272.1.78.1.2 |
rcPlsbGlobalMstiMSTI instance ID for PLSB VLANSrw INTEGER .1.3.6.1.4.1.2272.1.78.1.3 |
rcPlsbGlobalEtherTypeSPBM Ethertyperw Integer32 (1..'FFFF'h) .1.3.6.1.4.1.2272.1.78.1.4 |
rcKhi OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.85 |
rcKhiConfig OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.85.1 |
rcKhiConfigKhiAdminStateKey Health Inidaction, this object is used turn off the KHI feature administratively. true(1) means On, false(2) means off. By default, it is always set to true(1).rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.85.1.1 |
rcKhiConfigKhiBootDelayTime interval from system up and running to start the KHI feature. Set to 0 to disable to the time interval.rw Unsigned32 .1.3.6.1.4.1.2272.1.85.1.2 |
rcKhiConfigClearActionClear action with bits set. 0 Bit means from left (most significant) bit to right (least significant) bit.rw Bits .1.3.6.1.4.1.2272.1.85.1.3 |
rcKhiConfigPortKhiAdminStateKey Health Indication, this object is used to turn off the Port KHI feature administratively. true(1) means On, false(2) means off. By default, it is always set to true(1)rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.85.1.4 |
rcKhiConfigPerfKhiAdminStateKey Health Indication, this object is used to turn off the Performance KHI feature administratively. true(1) means On, false(2) means off. By default, it is always set to true(1)rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.85.1.5 |
rcKhiConfigChasKhiAdminStateKey Health Inidcation, this object is used to turn off the Chassis KHI feature
administratively. true(1) means On, false(2) means off. By default, it is always
set to true(1).rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.85.1.6 |
rcKhiConfigForwardingKhiAdminStateKey Health Indication, this object is used to turn off the Forwarding KHI feature administratively. true(1) means On, false(2) means off. By default, it is always set to true(1)rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.85.1.7 |
rcKhiConfigForwardingClearSlotClear KHI Forwarding stats for a particular Slotrw INTEGER .1.3.6.1.4.1.2272.1.85.1.9 |
rcKhiSlot OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.85.10 |
rcKhiSlotPerfTableSlot Performance Information SEQUENCE OF RcKhiSlotPerfEntry .1.3.6.1.4.1.2272.1.85.10.1 |
rcKhiSlotPerfEntrySlot Performance Entry RcKhiSlotPerfEntry .1.3.6.1.4.1.2272.1.85.10.1.1 |
rcKhiSlotIndexAn unique index used to identify the slot Integer32 (1..12 | 21..26) .1.3.6.1.4.1.2272.1.85.10.1.1.1 |
rcKhiSlotCpuCurrentUtilPercentage CPU utilization under current
operating conditions. Value is in tenth's
of a percent.ro Integer32 .1.3.6.1.4.1.2272.1.85.10.1.1.2 |
rcKhiSlotCpu5MinAveAverage percentage CPU utilization over
the past 5 minutes. Value is in tenth's
of a percent.ro INTEGER .1.3.6.1.4.1.2272.1.85.10.1.1.3 |
rcKhiSlotCpu5MinHiHi watermark for percentage CPU utilization
over the past 5 minutes. Value is in tenth's
of a percent.ro INTEGER .1.3.6.1.4.1.2272.1.85.10.1.1.4 |
rcKhiSlotCpu5MinHiTimeLast time at which sampling occured.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2272.1.85.10.1.1.5 |
rcKhiSlotMemUsedThe amount of DRAM memory consumed in KB.ro Integer32 .1.3.6.1.4.1.2272.1.85.10.1.1.6 |
rcKhiSlotMemFreeThe amount of DRAM memory available in KB.ro Integer32 .1.3.6.1.4.1.2272.1.85.10.1.1.7 |
rcKhiSlotMemUtilCurrent percentage of memory utilization.ro Integer32 .1.3.6.1.4.1.2272.1.85.10.1.1.8 |
rcKhiSlotMem5MinAveAverage percentage of memory utilization over the
past 5 minutes.ro Integer32 .1.3.6.1.4.1.2272.1.85.10.1.1.9 |
rcKhiSlotMem5MinHiHigh watermark for percentage memory
utilization over the past 5 minutes.ro Integer32 .1.3.6.1.4.1.2272.1.85.10.1.1.10 |
rcKhiSlotMem5MinHiTimeThe last time memory information was registered.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2272.1.85.10.1.1.11 |
rcKhiSlotUsedFbufThe number of Fbufs in use.ro Integer32 .1.3.6.1.4.1.2272.1.85.10.1.1.12 |
rcKhiSlotFreeFbufThe number of Fbufs available.ro Integer32 .1.3.6.1.4.1.2272.1.85.10.1.1.13 |
rcKhiSlotNoFbufThe number of times when running out of Fbuffro Integer32 .1.3.6.1.4.1.2272.1.85.10.1.1.14 |
rcKhiSlotNetStackSysFreeMbufThe number of network stack system Mbufs available.ro Integer32 .1.3.6.1.4.1.2272.1.85.10.1.1.15 |
rcKhiSlotNetStackDataFreeMbufThe number of network stack data Mbufs available.ro Integer32 .1.3.6.1.4.1.2272.1.85.10.1.1.16 |
rcKhiSlotNetStackSysUsedMbufThe number of network stack system Mbufs in use.ro Integer32 .1.3.6.1.4.1.2272.1.85.10.1.1.17 |
rcKhiSlotNetStackDataUsedMbufThe number of network stack data Mbufs in use.ro Integer32 .1.3.6.1.4.1.2272.1.85.10.1.1.18 |
rcKhiSlotNetStackSysSocketMbufThe number of network stack system sockets.ro Integer32 .1.3.6.1.4.1.2272.1.85.10.1.1.19 |
rcKhiSlotQHighThe highest number of queue entries consumed
for system messaging.ro Integer32 .1.3.6.1.4.1.2272.1.85.10.1.1.20 |
rcKhiSlotQNormalThe current number of queue entries consumed
for system messaging.ro Integer32 .1.3.6.1.4.1.2272.1.85.10.1.1.21 |
rcKhiSlotFreeQEntriesThe current available number of queue entries
for system messaging.ro Integer32 .1.3.6.1.4.1.2272.1.85.10.1.1.22 |
rcKhiSlotProcessTableCP Process Information SEQUENCE OF RcKhiSlotProcessEntry .1.3.6.1.4.1.2272.1.85.10.2 |
rcKhiSlotProcessEntrySlot Process Entry RcKhiSlotProcessEntry .1.3.6.1.4.1.2272.1.85.10.2.1 |
rcKhiSlotProcessIdProcess ID Integer32 .1.3.6.1.4.1.2272.1.85.10.2.1.1 |
rcKhiSlotProcessParentIdParent Process IDro Integer32 .1.3.6.1.4.1.2272.1.85.10.2.1.2 |
rcKhiSlotProcessNameName of the process runningro DisplayString .1.3.6.1.4.1.2272.1.85.10.2.1.3 |
rcKhiSlotProcessVmSizeThe size of the virtual memory allocated to the processro Integer32 .1.3.6.1.4.1.2272.1.85.10.2.1.4 |
rcKhiSlotProcessVmLckThe amount of locked memoryro Integer32 .1.3.6.1.4.1.2272.1.85.10.2.1.5 |
rcKhiSlotProcessVmRssThe amount of memory mapped in RAM ( instead of swapped out)ro Integer32 .1.3.6.1.4.1.2272.1.85.10.2.1.6 |
rcKhiSlotProcessVmDataThe size of the Data segmentro Integer32 .1.3.6.1.4.1.2272.1.85.10.2.1.7 |
rcKhiSlotProcessVmStkThe stack sizero Integer32 .1.3.6.1.4.1.2272.1.85.10.2.1.8 |
rcKhiSlotProcessVmExeThe size of the executable segmentro Integer32 .1.3.6.1.4.1.2272.1.85.10.2.1.9 |
rcKhiSlotProcessVmLibThe size of the library codero Integer32 .1.3.6.1.4.1.2272.1.85.10.2.1.10 |
rcKhiSlotPThreadTableSlot pthread information SEQUENCE OF RcKhiSlotPThreadEntry .1.3.6.1.4.1.2272.1.85.10.3 |
rcKhiSlotPThreadEntrySlot pthread entry RcKhiSlotPThreadEntry .1.3.6.1.4.1.2272.1.85.10.3.1 |
rcKhiSlotPThreadTaskIdTask ID Integer32 .1.3.6.1.4.1.2272.1.85.10.3.1.1 |
rcKhiSlotPThreadNameName of the process runningro DisplayString .1.3.6.1.4.1.2272.1.85.10.3.1.2 |
rcKhiSlotPThreadCpuCurrentUtilPercentage CPU utilization under current
operating conditions. Value is in tenth's
of a percent.ro Integer32 .1.3.6.1.4.1.2272.1.85.10.3.1.3 |
rcKhiSlotPThreadCpu5MinAveAverage percentage CPU utilization over
the past 5 minutes. Value is in tenth's
of a percent.ro Integer32 .1.3.6.1.4.1.2272.1.85.10.3.1.4 |
rcKhiSlotPThreadCpu5MinHiHi watermark for percentage CPU utilization
over the past 5 minutes. Value is in tenth's
of a percent.ro Integer32 .1.3.6.1.4.1.2272.1.85.10.3.1.5 |
rcKhiSlotPthread5MinHiTimeLast time at which sampling occured.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2272.1.85.10.3.1.6 |
rcKhiForwardingCb OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.85.11 |
rcKhiForwardingCbIfTableForwarding Interface Key Health Indicator MIB - All Cobalt Blue Data. SEQUENCE OF RcKhiForwardingCbIfEntry .1.3.6.1.4.1.2272.1.85.11.1 |
rcKhiForwardingCbIfEntryForwarding Interface KHI - Cobalt Blue table entry. RcKhiForwardingCbIfEntry .1.3.6.1.4.1.2272.1.85.11.1.1 |
rcKhiForwardingCbIfIndexInterface index for CB's KHI Forwarding data.
Indicies are essentially port based. InterfaceIndex .1.3.6.1.4.1.2272.1.85.11.1.1.1 |
rcKhiForwardingCbIfRxOkReceieve OK Packetsro Counter64 .1.3.6.1.4.1.2272.1.85.11.1.1.2 |
rcKhiForwardingCbIfTxOkTransmit OK Packetsro Counter64 .1.3.6.1.4.1.2272.1.85.11.1.1.3 |
rcKhiForwardingCbIfRxErrReceive Error Packetsro Counter64 .1.3.6.1.4.1.2272.1.85.11.1.1.4 |
rcKhiForwardingCbIfTxErrTransmit Error Packetsro Counter64 .1.3.6.1.4.1.2272.1.85.11.1.1.5 |
rcKhiForwardingCbIfRdbgc0RDBGC0 Packetsro Counter64 .1.3.6.1.4.1.2272.1.85.11.1.1.6 |
rcKhiForwardingCbIfRdbgc0MaskRDBGC0 Maskro Counter64 .1.3.6.1.4.1.2272.1.85.11.1.1.7 |
rcKhiForwardingCbIfTdbgc0TDBGC0 Packetsro Counter64 .1.3.6.1.4.1.2272.1.85.11.1.1.8 |
rcKhiForwardingCbIfTdbgc0MaskTDBGC0 Maskro Counter64 .1.3.6.1.4.1.2272.1.85.11.1.1.9 |
rcKhiForwardingCbIfK2IpmcDropsIP Multicast Dropsro Counter64 .1.3.6.1.4.1.2272.1.85.11.1.1.10 |
rcKhiForwardingCbMachigigTableForwarding Mac-Higig Key Health Indicator MIB - All Cobalt Blue Data. SEQUENCE OF RcKhiForwardingCbMachigigEntry .1.3.6.1.4.1.2272.1.85.11.2 |
rcKhiForwardingCbMachigigEntryForwarding Mac-Higig KHI - Cobalt Blue table entry. RcKhiForwardingCbMachigigEntry .1.3.6.1.4.1.2272.1.85.11.2.1 |
rcKhiForwardingCbMachigigIndexIndex for CB's Forwarding MAc-Higig Health data. There are 6
indicies reserved on a per slot basis. Depending on
the card present and the data being requested not all
indicies may be used. INTEGER .1.3.6.1.4.1.2272.1.85.11.2.1.1 |
rcKhiForwardingCbMachigigMacK2ro Counter64 .1.3.6.1.4.1.2272.1.85.11.2.1.2 |
rcKhiForwardingCbMachigigMacK2Macro Counter64 .1.3.6.1.4.1.2272.1.85.11.2.1.3 |
rcKhiForwardingCbMachigigRDGBC0ro Counter64 .1.3.6.1.4.1.2272.1.85.11.2.1.4 |
rcKhiForwardingCbMachigigRDGBC0maskro Counter64 .1.3.6.1.4.1.2272.1.85.11.2.1.5 |
rcKhiForwardingCbMachigigTDGBC0ro Counter64 .1.3.6.1.4.1.2272.1.85.11.2.1.6 |
rcKhiForwardingCbMachigigTDGBC0maskro Counter64 .1.3.6.1.4.1.2272.1.85.11.2.1.7 |
rcKhiForwardingCbMachigigIFPDOSDropsro Counter64 .1.3.6.1.4.1.2272.1.85.11.2.1.8 |
rcKhiForwardingCbK2TableForwarding K2 Key Health Indicator MIB - All Cobalt Blue Data. SEQUENCE OF RcKhiForwardingCbK2Entry .1.3.6.1.4.1.2272.1.85.11.3 |
rcKhiForwardingCbK2EntryForwarding K2 KHI - Cobalt Blue table entry. RcKhiForwardingCbK2Entry .1.3.6.1.4.1.2272.1.85.11.3.1 |
rcKhiForwardingCbK2IndexIndex for CB's Forwarding K2 Health data. There are 6
indicies reserved on a per slot basis. Depending on
the card present and the data being requested not all
indicies may be used. INTEGER .1.3.6.1.4.1.2272.1.85.11.3.1.1 |
rcKhiForwardingCbK2MacK2ro Counter64 .1.3.6.1.4.1.2272.1.85.11.3.1.2 |
rcKhiForwardingCbK2Zagrosro Counter64 .1.3.6.1.4.1.2272.1.85.11.3.1.3 |
rcKhiForwardingCbK2ZagrosK2ro Counter64 .1.3.6.1.4.1.2272.1.85.11.3.1.4 |
rcKhiForwardingCbK2Macro Counter64 .1.3.6.1.4.1.2272.1.85.11.3.1.5 |
rcKhiForwardingCbK2MacK2Errro Counter64 .1.3.6.1.4.1.2272.1.85.11.3.1.6 |
rcKhiForwardingCbK2ZagrosErrro Counter64 .1.3.6.1.4.1.2272.1.85.11.3.1.7 |
rcKhiForwardingCbK2ZagrosK2Errro Counter64 .1.3.6.1.4.1.2272.1.85.11.3.1.8 |
rcKhiForwardingCbK2MacErrro Counter64 .1.3.6.1.4.1.2272.1.85.11.3.1.9 |
rcKhiForwardingCbZagrosTableZagros Forwarding Zagros Key Health Indicator MIB - All Cobalt Blue Data. SEQUENCE OF RcKhiForwardingCbZagrosEntry .1.3.6.1.4.1.2272.1.85.11.4 |
rcKhiForwardingCbZagrosEntryZagros Forwarding KHI - Cobalt Blue table entry. RcKhiForwardingCbZagrosEntry .1.3.6.1.4.1.2272.1.85.11.4.1 |
rcKhiForwardingCbZagrosIndexIndex for CB's Forwarding Zagros Health data. There are 6
indicies reserved on a per slot basis. Depending on
the card present and the data being requested not all
indicies may be used. INTEGER .1.3.6.1.4.1.2272.1.85.11.4.1.1 |
rcKhiForwardingCbZagrosK2Zagrosro Counter64 .1.3.6.1.4.1.2272.1.85.11.4.1.2 |
rcKhiForwardingCbZagrosRspro Counter64 .1.3.6.1.4.1.2272.1.85.11.4.1.3 |
rcKhiForwardingCbZagrosQero Counter64 .1.3.6.1.4.1.2272.1.85.11.4.1.4 |
rcKhiForwardingCbZagrosQeZagrosro Counter64 .1.3.6.1.4.1.2272.1.85.11.4.1.5 |
rcKhiForwardingCbZagrosK2ro Counter64 .1.3.6.1.4.1.2272.1.85.11.4.1.6 |
rcKhiForwardingCbZagrosPmmPoolLoro Counter64 .1.3.6.1.4.1.2272.1.85.11.4.1.7 |
rcKhiForwardingCbZagrosPmmPoolHighro Counter64 .1.3.6.1.4.1.2272.1.85.11.4.1.8 |
rcKhiForwardingCbZagrosPmmRspDropCountersro Counter64 .1.3.6.1.4.1.2272.1.85.11.4.1.9 |
rcKhiForwardingCbZagrosPmmoutputDropCountro Counter64 .1.3.6.1.4.1.2272.1.85.11.4.1.10 |
rcKhiForwardingCbZagrosPmmAdmissionRspDropCountro Counter64 .1.3.6.1.4.1.2272.1.85.11.4.1.11 |
rcKhiForwardingCbZagrosPmmAdmissionErrDropCountro Counter64 .1.3.6.1.4.1.2272.1.85.11.4.1.12 |
rcKhiForwardingCbZagrosPmmPool1Dropro Counter64 .1.3.6.1.4.1.2272.1.85.11.4.1.13 |
rcKhiForwardingCbZagrosPmmPool2Dropro Counter64 .1.3.6.1.4.1.2272.1.85.11.4.1.14 |
rcKhiForwardingCbZagrosPmmPool3Dropro Counter64 .1.3.6.1.4.1.2272.1.85.11.4.1.15 |
rcKhiForwardingCbZagrosPmmPool4Dropro Counter64 .1.3.6.1.4.1.2272.1.85.11.4.1.16 |
rcKhiForwardingCbZagrosPmmPool5Dropro Counter64 .1.3.6.1.4.1.2272.1.85.11.4.1.17 |
rcKhiForwardingCbZagrosPmmPool6Dropro Counter64 .1.3.6.1.4.1.2272.1.85.11.4.1.18 |
rcKhiForwardingCbZagrosPmmPool7Dropro Counter64 .1.3.6.1.4.1.2272.1.85.11.4.1.19 |
rcKhiForwardingCbZagrosPmmPool8Dropro Counter64 .1.3.6.1.4.1.2272.1.85.11.4.1.20 |
rcKhiForwardingCbZagrosPmmPool9Dropro Counter64 .1.3.6.1.4.1.2272.1.85.11.4.1.21 |
rcKhiForwardingCbZagrosPmmPool10Dropro Counter64 .1.3.6.1.4.1.2272.1.85.11.4.1.22 |
rcKhiForwardingCbZagrosHbeCommandDropsro Counter64 .1.3.6.1.4.1.2272.1.85.11.4.1.23 |
rcKhiForwardingCbZagrosTcamSearchErrorro Counter64 .1.3.6.1.4.1.2272.1.85.11.4.1.24 |
rcKhiForwardingCbZagrosEhpAllPortDownIstCounterro Counter64 .1.3.6.1.4.1.2272.1.85.11.4.1.25 |
rcKhiForwardingCbZagrosEhpAllPortDownMltCounterro Counter64 .1.3.6.1.4.1.2272.1.85.11.4.1.26 |
rcKhiForwardingCbZagrosEhpErrorDropCounterro Counter64 .1.3.6.1.4.1.2272.1.85.11.4.1.27 |
rcKhiForwardingCbZagrosIgrFilterDropCountro Counter64 .1.3.6.1.4.1.2272.1.85.11.4.1.28 |
rcKhiForwardingCbZagrosZapTxCtlro Counter64 .1.3.6.1.4.1.2272.1.85.11.4.1.29 |
rcKhiForwardingCbZagrosZapTxDatro Counter64 .1.3.6.1.4.1.2272.1.85.11.4.1.30 |
rcKhiForwardingCbZagrosZapRxCtlro Counter64 .1.3.6.1.4.1.2272.1.85.11.4.1.31 |
rcKhiForwardingCbZagrosZapRxDatro Counter64 .1.3.6.1.4.1.2272.1.85.11.4.1.32 |
rcKhiForwardingCbZagrosZapTxHbero Counter64 .1.3.6.1.4.1.2272.1.85.11.4.1.33 |
rcKhiForwardingCbZagrosTcamSearchValro Counter64 .1.3.6.1.4.1.2272.1.85.11.4.1.34 |
rcKhiForwardingCbZagrosEmbDropCountro Counter64 .1.3.6.1.4.1.2272.1.85.11.4.1.35 |
rcKhiForwardingCbZagrosEhpFilterDropCountro Counter64 .1.3.6.1.4.1.2272.1.85.11.4.1.36 |
rcKhiForwardingCbZagrosEgrIpmcDropCountro Counter64 .1.3.6.1.4.1.2272.1.85.11.4.1.37 |
rcKhiForwardingCbZagrosEgressEsb1Countro Counter64 .1.3.6.1.4.1.2272.1.85.11.4.1.38 |
rcKhiForwardingCbZagrosEgressEsb2Countro Counter64 .1.3.6.1.4.1.2272.1.85.11.4.1.39 |
rcKhiForwardingCbZagrosEgressEsb3Countro Counter64 .1.3.6.1.4.1.2272.1.85.11.4.1.40 |
rcKhiForwardingCbZagrosEgressEsb4Countro Counter64 .1.3.6.1.4.1.2272.1.85.11.4.1.41 |
rcKhiForwardingCbZagrosEgressEsb5Countro Counter64 .1.3.6.1.4.1.2272.1.85.11.4.1.42 |
rcKhiForwardingCbZagrosEgressEsb6Countro Counter64 .1.3.6.1.4.1.2272.1.85.11.4.1.43 |
rcKhiForwardingCbZagrosRspRxro Counter64 .1.3.6.1.4.1.2272.1.85.11.4.1.44 |
rcKhiForwardingCbZagrosOpTxro Counter64 .1.3.6.1.4.1.2272.1.85.11.4.1.45 |
rcKhiForwardingCbZagrosRspTxro Counter64 .1.3.6.1.4.1.2272.1.85.11.4.1.46 |
rcKhiForwardingCbZagrosCifRqCountro Counter64 .1.3.6.1.4.1.2272.1.85.11.4.1.47 |
rcKhiForwardingCbZagrosCifRsCounterro Counter64 .1.3.6.1.4.1.2272.1.85.11.4.1.48 |
rcKhiForwardingCbZagrosPage1Countroobsolete Counter64 .1.3.6.1.4.1.2272.1.85.11.4.1.49 |
rcKhiForwardingCbZagrosPage2Countroobsolete Counter64 .1.3.6.1.4.1.2272.1.85.11.4.1.50 |
rcKhiForwardingCbZagrosPage3Countroobsolete Counter64 .1.3.6.1.4.1.2272.1.85.11.4.1.51 |
rcKhiForwardingCbZagrosPage4Countroobsolete Counter64 .1.3.6.1.4.1.2272.1.85.11.4.1.52 |
rcKhiForwardingCbZagrosPage5Countroobsolete Counter64 .1.3.6.1.4.1.2272.1.85.11.4.1.53 |
rcKhiForwardingCbZagrosPage6Countroobsolete Counter64 .1.3.6.1.4.1.2272.1.85.11.4.1.54 |
rcKhiForwardingCbZagrosPage7Countroobsolete Counter64 .1.3.6.1.4.1.2272.1.85.11.4.1.55 |
rcKhiForwardingCbZagrosPage8Countroobsolete Counter64 .1.3.6.1.4.1.2272.1.85.11.4.1.56 |
rcKhiForwardingCbZagrosPage9Countroobsolete Counter64 .1.3.6.1.4.1.2272.1.85.11.4.1.57 |
rcKhiForwardingCbZagrosPage10Countroobsolete Counter64 .1.3.6.1.4.1.2272.1.85.11.4.1.58 |
rcKhiForwardingCbZagrosShPproobsolete Counter64 .1.3.6.1.4.1.2272.1.85.11.4.1.59 |
rcKhiForwardingCbZagrosFpCountsroobsolete Counter64 .1.3.6.1.4.1.2272.1.85.11.4.1.60 |
rcKhiForwardingCbZagrosRspPlcThresholdRegro Counter64 .1.3.6.1.4.1.2272.1.85.11.4.1.61 |
rcKhiForwardingCbZagrosRePlcro Counter64 .1.3.6.1.4.1.2272.1.85.11.4.1.62 |
rcKhiForwardingCbZagrosNumPoolsro Counter64 .1.3.6.1.4.1.2272.1.85.11.4.1.63 |
rcKhiForwardingCbZagrosFpCntOPAFree page counter for OPA(Output Packet Assembler)ro Counter32 .1.3.6.1.4.1.2272.1.85.11.4.1.64 |
rcKhiForwardingCbZagrosFpCntRPAFree page counter for RPA(RSP Packet Assembler)ro Counter32 .1.3.6.1.4.1.2272.1.85.11.4.1.65 |
rcKhiForwardingCbZagrosFpCntFPMFree page counter for FPM(Free Page Manager)ro Counter32 .1.3.6.1.4.1.2272.1.85.11.4.1.66 |
rcKhiForwardingCbZagrosRspPlcPktCntPeakRSP PLC Peak Packet Countro Counter32 .1.3.6.1.4.1.2272.1.85.11.4.1.67 |
rcKhiForwardingCbZagrosRspPlcPktCntCurrRSP PLC Current Packet Countro Counter32 .1.3.6.1.4.1.2272.1.85.11.4.1.68 |
rcKhiForwardingCbZagrosRePlcPktCntPeakRE PLC(Replica Engine Packet Limit Count)Peak Packet Countro Counter32 .1.3.6.1.4.1.2272.1.85.11.4.1.69 |
rcKhiForwardingCbZagrosRePlcPktCntCurrRE PLC Current Packet Countro Counter32 .1.3.6.1.4.1.2272.1.85.11.4.1.70 |
rcKhiForwardingCbZagrosShPpPeakPMM shared pool Peak Valuero Counter32 .1.3.6.1.4.1.2272.1.85.11.4.1.71 |
rcKhiForwardingCbZagrosShPpCurrPMM shared pool Current Valuero Counter32 .1.3.6.1.4.1.2272.1.85.11.4.1.72 |
rcKhiForwardingCbZagrosEgressMultiCastPeakPMM EgressMultiCast Peak Valuero Counter32 .1.3.6.1.4.1.2272.1.85.11.4.1.73 |
rcKhiForwardingCbZagrosEgressMultiCastCurrPMM EgressMultiCast Current Valuero Counter32 .1.3.6.1.4.1.2272.1.85.11.4.1.74 |
rcKhiForwardingCbZagrosEgressOOBPeakPMM EgressOOB(Out Of Band) Peak Valuero Counter32 .1.3.6.1.4.1.2272.1.85.11.4.1.75 |
rcKhiForwardingCbZagrosEgressOOBCurrPMM EgressOOB Current Valuero Counter32 .1.3.6.1.4.1.2272.1.85.11.4.1.76 |
rcKhiForwardingCbZagrosIngressHeartbeatPeakPMM IngressHeartbeat Peak Valuero Counter32 .1.3.6.1.4.1.2272.1.85.11.4.1.77 |
rcKhiForwardingCbZagrosIngressHeartbeatCurrPMM IngressHeartbeat Current Valuero Counter32 .1.3.6.1.4.1.2272.1.85.11.4.1.78 |
rcKhiForwardingCbZagrosIngressCOPInsertPeakPMM IngressCOPInsert Peak Valuero Counter32 .1.3.6.1.4.1.2272.1.85.11.4.1.79 |
rcKhiForwardingCbZagrosIngressCOPInsertCurrPMM IngressCOPInsert Current Valuero Counter32 .1.3.6.1.4.1.2272.1.85.11.4.1.80 |
rcKhiForwardingCbZagrosIngressEfCtlPeakPMM Ingress EF/CTL(Expedited Forward/Control)Peak Valuero Counter32 .1.3.6.1.4.1.2272.1.85.11.4.1.81 |
rcKhiForwardingCbZagrosIngressEfCtlCurrPMM Ingress EF/CTL Current Valuero Counter32 .1.3.6.1.4.1.2272.1.85.11.4.1.82 |
rcKhiForwardingCbZagrosIngressAfBePeakPMM Ingress AF/BE(Assured Forwarding/Best Effort)Peak Valuero Counter32 .1.3.6.1.4.1.2272.1.85.11.4.1.83 |
rcKhiForwardingCbZagrosIngressAfBeCurrPMM Ingress AF/BE Current Valuero Counter32 .1.3.6.1.4.1.2272.1.85.11.4.1.84 |
rcKhiForwardingCbZagrosEgressL2BcUcPeakPMM Egress L2BC/UC(Layer 2 Broadcast/Unicast)Peak Valuero Counter32 .1.3.6.1.4.1.2272.1.85.11.4.1.85 |
rcKhiForwardingCbZagrosEgressL2BcUcCurrPMM Egress L2BC/UC Current Valuero Counter32 .1.3.6.1.4.1.2272.1.85.11.4.1.86 |
rcKhiForwardingCbZagrosEgressMirrorPeakPMM Egress Mirror Peak Valuero Counter32 .1.3.6.1.4.1.2272.1.85.11.4.1.87 |
rcKhiForwardingCbZagrosEgressMirrorCurrPMM Egress Mirror Current Valuero Counter32 .1.3.6.1.4.1.2272.1.85.11.4.1.88 |
forwardingCbZagrosPool9PeakPMM Pool9 Peak Valuero Counter32 .1.3.6.1.4.1.2272.1.85.11.4.1.89 |
rcKhiForwardingCbZagrosPool9CurrPMM Pool9 Current Valuero Counter32 .1.3.6.1.4.1.2272.1.85.11.4.1.90 |
rcKhiForwardingCbRspTableForwarding Rsp Key Health Indicator MIB - All Cobalt Blue Data. SEQUENCE OF RcKhiForwardingCbRspEntry .1.3.6.1.4.1.2272.1.85.11.5 |
rcKhiForwardingCbRspEntryForwarding Rsp KHI - Cobalt Blue table entry. RcKhiForwardingCbRspEntry .1.3.6.1.4.1.2272.1.85.11.5.1 |
rcKhiForwardingCbRspIndexIndex for CB's Forwarding Rsp Health data. There are 6
indicies reserved on a per slot basis. Depending on
the card present and the data being requested not all
indicies may be used. INTEGER .1.3.6.1.4.1.2272.1.85.11.5.1.1 |
rcKhiForwardingCbRspLsmDropsro Counter64 .1.3.6.1.4.1.2272.1.85.11.5.1.2 |
rcKhiForwardingCbRspExceptionDropsro Counter64 .1.3.6.1.4.1.2272.1.85.11.5.1.3 |
rcKhiForwardingCbRspFrameErrorDropsro Counter64 .1.3.6.1.4.1.2272.1.85.11.5.1.4 |
rcKhiForwardingCbRspFdibFullDropsro Counter64 .1.3.6.1.4.1.2272.1.85.11.5.1.5 |
rcKhiForwardingCbRspIngrMltAllPortDownro Counter64 .1.3.6.1.4.1.2272.1.85.11.5.1.6 |
rcKhiForwardingCbRspEgressMltAllPortDownDropsro Counter64 .1.3.6.1.4.1.2272.1.85.11.5.1.7 |
rcKhiForwardingCbRspEgressIpMcastRecordsNotFoundro Counter64 .1.3.6.1.4.1.2272.1.85.11.5.1.8 |
rcKhiForwardingCbRspEgressIpMcastMltWrongPortro Counter64 .1.3.6.1.4.1.2272.1.85.11.5.1.9 |
rcKhiForwardingCbRspEgressIpMcastSourceKnockoutro Counter64 .1.3.6.1.4.1.2272.1.85.11.5.1.10 |
rcKhiForwardingCbRspIngressDaNotFoundDropsro Counter64 .1.3.6.1.4.1.2272.1.85.11.5.1.11 |
rcKhiForwardingCbRspIngressUnknownro Counter64 .1.3.6.1.4.1.2272.1.85.11.5.1.12 |
rcKhiForwardingCbRspIngressDiscardDestIdDropsro Counter64 .1.3.6.1.4.1.2272.1.85.11.5.1.13 |
rcKhiForwardingCbRspMacLearningPacketDropsro Counter64 .1.3.6.1.4.1.2272.1.85.11.5.1.14 |
rcKhiForwardingCbRspIngrMltAllPortsDownro Counter64 .1.3.6.1.4.1.2272.1.85.11.5.1.15 |
rcKhiForwardingCbRspIngressIpmcSupressionDropsro Counter64 .1.3.6.1.4.1.2272.1.85.11.5.1.16 |
rcKhiForwardingCbRspUnsupportedFeatureDropsro Counter64 .1.3.6.1.4.1.2272.1.85.11.5.1.17 |
rcKhiForwardingCbRspAclDiscardsro Counter64 .1.3.6.1.4.1.2272.1.85.11.5.1.18 |
rcKhiForwardingCbRspIngressIpmcLookupFailsro Counter64 .1.3.6.1.4.1.2272.1.85.11.5.1.19 |
rcKhiForwardingCbRspIpv4DestIpLookupFailsro Counter64 .1.3.6.1.4.1.2272.1.85.11.5.1.20 |
rcKhiForwardingCbRspIpv4SourceIpLookupFailsro Counter64 .1.3.6.1.4.1.2272.1.85.11.5.1.21 |
rcKhiForwardingCbRspL3MirrorDropsro Counter64 .1.3.6.1.4.1.2272.1.85.11.5.1.22 |
rcKhiForwardingCbRspIpV6LookupFailsro Counter64 .1.3.6.1.4.1.2272.1.85.11.5.1.23 |
rcKhiForwardingCbRspIpV6TunnelLookupV4Failsro Counter64 .1.3.6.1.4.1.2272.1.85.11.5.1.24 |
rcKhiForwardingCbQeTableForwarding Qe Key Health Indicator MIB - All Cobalt Blue Data. SEQUENCE OF RcKhiForwardingCbQeEntry .1.3.6.1.4.1.2272.1.85.11.6 |
rcKhiForwardingCbQeEntryForwarding Qe KHI - Cobalt Blue table entry. RcKhiForwardingCbQeEntry .1.3.6.1.4.1.2272.1.85.11.6.1 |
rcKhiForwardingCbQeIndexIndex for CB's Forwarding Qe Health data. There are 6
indicies reserved on a per slot basis. Depending on
the card present and the data being requested not all
indicies may be used. INTEGER .1.3.6.1.4.1.2272.1.85.11.6.1.1 |
rcKhiForwardingCbQeIngressQmAgrAcceptedPktCnt0ro Counter64 .1.3.6.1.4.1.2272.1.85.11.6.1.2 |
rcKhiForwardingCbQeIngressQmAgrMarkedPktCnt0ro Counter64 .1.3.6.1.4.1.2272.1.85.11.6.1.3 |
rcKhiForwardingCbQeIngressQmAgrAcceptedPktCnt1ro Counter64 .1.3.6.1.4.1.2272.1.85.11.6.1.4 |
rcKhiForwardingCbQeIngressQmAgrMarkedPktCnt1ro Counter64 .1.3.6.1.4.1.2272.1.85.11.6.1.5 |
rcKhiForwardingCbQeIngressQmAgrAcceptedPktCnt2ro Counter64 .1.3.6.1.4.1.2272.1.85.11.6.1.6 |
rcKhiForwardingCbQeIngressQmAgrMarkedPktCnt2ro Counter64 .1.3.6.1.4.1.2272.1.85.11.6.1.7 |
rcKhiForwardingCbQeIngressQmAgrAcceptedPktCnt3ro Counter64 .1.3.6.1.4.1.2272.1.85.11.6.1.8 |
rcKhiForwardingCbQeIngressQmAgrDequeuedPktCntro Counter64 .1.3.6.1.4.1.2272.1.85.11.6.1.9 |
rcKhiForwardingCbQeIngressPmSwitchPktCntro Counter64 .1.3.6.1.4.1.2272.1.85.11.6.1.10 |
rcKhiForwardingCbQeIngressPmLocalPktCntro Counter64 .1.3.6.1.4.1.2272.1.85.11.6.1.11 |
rcKhiForwardingCbQeIngressPmSwitchTestPktCntro Counter64 .1.3.6.1.4.1.2272.1.85.11.6.1.12 |
rcKhiForwardingCbQeIngressPmLocalTestPktCntro Counter64 .1.3.6.1.4.1.2272.1.85.11.6.1.13 |
rcKhiForwardingCbQeIngressSr0RxP0PktCntro Counter64 .1.3.6.1.4.1.2272.1.85.11.6.1.14 |
rcKhiForwardingCbQeIngressSr1RxP0PktCntro Counter64 .1.3.6.1.4.1.2272.1.85.11.6.1.15 |
rcKhiForwardingCbQeIngressSr0RxP1PktCntro Counter64 .1.3.6.1.4.1.2272.1.85.11.6.1.16 |
rcKhiForwardingCbQeIngressSr1RxP1PktCntro Counter64 .1.3.6.1.4.1.2272.1.85.11.6.1.17 |
rcKhiForwardingCbQeIngressSr0RxP2PktCntro Counter64 .1.3.6.1.4.1.2272.1.85.11.6.1.18 |
rcKhiForwardingCbQeIngressSr1RxP2PktCntro Counter64 .1.3.6.1.4.1.2272.1.85.11.6.1.19 |
rcKhiForwardingCbQeIngressSr0RxP3PktCntro Counter64 .1.3.6.1.4.1.2272.1.85.11.6.1.20 |
rcKhiForwardingCbQeIngressSr1RxP3PktCntro Counter64 .1.3.6.1.4.1.2272.1.85.11.6.1.21 |
rcKhiForwardingCbQeIngressSr0RxP4PktCntro Counter64 .1.3.6.1.4.1.2272.1.85.11.6.1.22 |
rcKhiForwardingCbQeIngressSr1RxP4PktCntro Counter64 .1.3.6.1.4.1.2272.1.85.11.6.1.23 |
rcKhiForwardingCbQeIngressSr0RxP5PktCntro Counter64 .1.3.6.1.4.1.2272.1.85.11.6.1.24 |
rcKhiForwardingCbQeIngressSr1RxP5PktCntro Counter64 .1.3.6.1.4.1.2272.1.85.11.6.1.25 |
rcKhiForwardingCbQeIngressSr0RxP6PktCntro Counter64 .1.3.6.1.4.1.2272.1.85.11.6.1.26 |
rcKhiForwardingCbQeIngressSr1RxP6PktCntro Counter64 .1.3.6.1.4.1.2272.1.85.11.6.1.27 |
rcKhiForwardingCbQeIngressSr0RxP7PktCntro Counter64 .1.3.6.1.4.1.2272.1.85.11.6.1.28 |
rcKhiForwardingCbQeIngressSr1RxP7PktCntro Counter64 .1.3.6.1.4.1.2272.1.85.11.6.1.29 |
rcKhiForwardingCbQeIngressSr0RxP8PktCntro Counter64 .1.3.6.1.4.1.2272.1.85.11.6.1.30 |
rcKhiForwardingCbQeIngressSr1RxP8PktCntro Counter64 .1.3.6.1.4.1.2272.1.85.11.6.1.31 |
rcKhiForwardingCbQeIngressSr0RxP9PktCntro Counter64 .1.3.6.1.4.1.2272.1.85.11.6.1.32 |
rcKhiForwardingCbQeIngressSr1RxP9PktCntro Counter64 .1.3.6.1.4.1.2272.1.85.11.6.1.33 |
rcKhiForwardingCbQeIngressSr0RxP10PktCntro Counter64 .1.3.6.1.4.1.2272.1.85.11.6.1.34 |
rcKhiForwardingCbQeIngressSr1RxP10PktCntro Counter64 .1.3.6.1.4.1.2272.1.85.11.6.1.35 |
rcKhiForwardingCbQeIngressSr0RxP11PktCntro Counter64 .1.3.6.1.4.1.2272.1.85.11.6.1.36 |
rcKhiForwardingCbQeIngressSr1RxP11PktCntro Counter64 .1.3.6.1.4.1.2272.1.85.11.6.1.37 |
rcKhiForwardingCbQeIngressSr0RxP12PktCntro Counter64 .1.3.6.1.4.1.2272.1.85.11.6.1.38 |
rcKhiForwardingCbQeIngressSr1RxP12PktCntro Counter64 .1.3.6.1.4.1.2272.1.85.11.6.1.39 |
rcKhiForwardingCbQeIngressSr0RxP13PktCntro Counter64 .1.3.6.1.4.1.2272.1.85.11.6.1.40 |
rcKhiForwardingCbQeIngressSr1RxP13PktCntro Counter64 .1.3.6.1.4.1.2272.1.85.11.6.1.41 |
rcKhiForwardingCbQeIngressSr0RxP14PktCntro Counter64 .1.3.6.1.4.1.2272.1.85.11.6.1.42 |
rcKhiForwardingCbQeIngressSr1RxP14PktCntro Counter64 .1.3.6.1.4.1.2272.1.85.11.6.1.43 |
rcKhiForwardingCbQeIngressSr0RxP15PktCntro Counter64 .1.3.6.1.4.1.2272.1.85.11.6.1.44 |
rcKhiForwardingCbQeIngressSr1RxP15PktCntro Counter64 .1.3.6.1.4.1.2272.1.85.11.6.1.45 |
rcKhiForwardingCbQeIngressSr0RxTestPktCntro Counter64 .1.3.6.1.4.1.2272.1.85.11.6.1.46 |
rcKhiForwardingCbQeIngressSr1RxTestPktCntro Counter64 .1.3.6.1.4.1.2272.1.85.11.6.1.47 |
rcKhiForwardingCbQeIngressRbIdp0RequestPktCntro Counter64 .1.3.6.1.4.1.2272.1.85.11.6.1.48 |
rcKhiForwardingCbQeIngressRbIdp1RequestPktCntro Counter64 .1.3.6.1.4.1.2272.1.85.11.6.1.49 |
rcKhiForwardingCbQeIngressRbIdp2RequestPktCntro Counter64 .1.3.6.1.4.1.2272.1.85.11.6.1.50 |
rcKhiForwardingCbQeIngressRbIdp3RequestPktCntro Counter64 .1.3.6.1.4.1.2272.1.85.11.6.1.51 |
rcKhiForwardingCbQeIngressRbIdp4RequestPktCntro Counter64 .1.3.6.1.4.1.2272.1.85.11.6.1.52 |
rcKhiForwardingCbQeIngressRbEnqrespPktCntro Counter64 .1.3.6.1.4.1.2272.1.85.11.6.1.53 |
rcKhiForwardingCbQeEgressSvPktCntro Counter64 .1.3.6.1.4.1.2272.1.85.11.6.1.54 |
rcKhiForwardingCbQeEgressSt0P0TxPktCntro Counter64 .1.3.6.1.4.1.2272.1.85.11.6.1.55 |
rcKhiForwardingCbQeEgressSt1P0TxPktCntro Counter64 .1.3.6.1.4.1.2272.1.85.11.6.1.56 |
rcKhiForwardingCbQeEgressSt0P1TxPktCntro Counter64 .1.3.6.1.4.1.2272.1.85.11.6.1.57 |
rcKhiForwardingCbQeEgressSt1P1TxPktCntro Counter64 .1.3.6.1.4.1.2272.1.85.11.6.1.58 |
rcKhiForwardingCbQeEgressSt0P2TxPktCntro Counter64 .1.3.6.1.4.1.2272.1.85.11.6.1.59 |
rcKhiForwardingCbQeEgressSt1P2TxPktCntro Counter64 .1.3.6.1.4.1.2272.1.85.11.6.1.60 |
rcKhiForwardingCbQeEgressSt0P3TxPktCntro Counter64 .1.3.6.1.4.1.2272.1.85.11.6.1.61 |
rcKhiForwardingCbQeEgressSt1P3TxPktCntro Counter64 .1.3.6.1.4.1.2272.1.85.11.6.1.62 |
rcKhiForwardingCbQeEgressSt0P4TxPktCntro Counter64 .1.3.6.1.4.1.2272.1.85.11.6.1.63 |
rcKhiForwardingCbQeEgressSt1P4TxPktCntro Counter64 .1.3.6.1.4.1.2272.1.85.11.6.1.64 |
rcKhiForwardingCbQeEgressSt0P5TxPktCntro Counter64 .1.3.6.1.4.1.2272.1.85.11.6.1.65 |
rcKhiForwardingCbQeEgressSt1P5TxPktCntro Counter64 .1.3.6.1.4.1.2272.1.85.11.6.1.66 |
rcKhiForwardingCbQeEgressSt0P6TxPktCntro Counter64 .1.3.6.1.4.1.2272.1.85.11.6.1.67 |
rcKhiForwardingCbQeEgressSt1P6TxPktCntro Counter64 .1.3.6.1.4.1.2272.1.85.11.6.1.68 |
rcKhiForwardingCbQeEgressSt0P7TxPktCntro Counter64 .1.3.6.1.4.1.2272.1.85.11.6.1.69 |
rcKhiForwardingCbQeEgressSt1P7TxPktCntro Counter64 .1.3.6.1.4.1.2272.1.85.11.6.1.70 |
rcKhiForwardingCbQeEgressSt0P8TxPktCntro Counter64 .1.3.6.1.4.1.2272.1.85.11.6.1.71 |
rcKhiForwardingCbQeEgressSt1P8TxPktCntro Counter64 .1.3.6.1.4.1.2272.1.85.11.6.1.72 |
rcKhiForwardingCbQeEgressSt0P9TxPktCntro Counter64 .1.3.6.1.4.1.2272.1.85.11.6.1.73 |
rcKhiForwardingCbQeEgressSt1P9TxPktCntro Counter64 .1.3.6.1.4.1.2272.1.85.11.6.1.74 |
rcKhiForwardingCbQeEgressSt0P10TxPktCntro Counter64 .1.3.6.1.4.1.2272.1.85.11.6.1.75 |
rcKhiForwardingCbQeEgressSt1P10TxPktCntro Counter64 .1.3.6.1.4.1.2272.1.85.11.6.1.76 |
rcKhiForwardingCbQeEgressSt0P11TxPktCntro Counter64 .1.3.6.1.4.1.2272.1.85.11.6.1.77 |
rcKhiForwardingCbQeEgressSt1P11TxPktCntro Counter64 .1.3.6.1.4.1.2272.1.85.11.6.1.78 |
rcKhiForwardingCbQeEgressSt0P12TxPktCntro Counter64 .1.3.6.1.4.1.2272.1.85.11.6.1.79 |
rcKhiForwardingCbQeEgressSt1P12TxPktCntro Counter64 .1.3.6.1.4.1.2272.1.85.11.6.1.80 |
rcKhiForwardingCbQeEgressSt0P13TxPktCntro Counter64 .1.3.6.1.4.1.2272.1.85.11.6.1.81 |
rcKhiForwardingCbQeEgressSt1P13TxPktCntro Counter64 .1.3.6.1.4.1.2272.1.85.11.6.1.82 |
rcKhiForwardingCbQeEgressSt0P14TxPktCntro Counter64 .1.3.6.1.4.1.2272.1.85.11.6.1.83 |
rcKhiForwardingCbQeEgressSt1P14TxPktCntro Counter64 .1.3.6.1.4.1.2272.1.85.11.6.1.84 |
rcKhiForwardingCbQeEgressSt0P15TxPktCntro Counter64 .1.3.6.1.4.1.2272.1.85.11.6.1.85 |
rcKhiForwardingCbQeEgressSt1P15TxPktCntro Counter64 .1.3.6.1.4.1.2272.1.85.11.6.1.86 |
rcKhiForwardingCbQeEgressSt0TxTestPktCntro Counter64 .1.3.6.1.4.1.2272.1.85.11.6.1.87 |
rcKhiForwardingCbQeEgressSt1TxTestPktCntro Counter64 .1.3.6.1.4.1.2272.1.85.11.6.1.88 |
rcKhiForwardingCbQeSvPartialPktCntro Counter64 .1.3.6.1.4.1.2272.1.85.11.6.1.89 |
rcKhiForwardingCbQeQmAgrWredDroppedPktCnt0ro Counter64 .1.3.6.1.4.1.2272.1.85.11.6.1.90 |
rcKhiForwardingCbQeQmAgrWredDroppedPktCnt1ro Counter64 .1.3.6.1.4.1.2272.1.85.11.6.1.91 |
rcKhiForwardingCbQeQmAgrWredDroppedPktCnt2ro Counter64 .1.3.6.1.4.1.2272.1.85.11.6.1.92 |
rcKhiForwardingCbQeQmAgrPolicedDroppedPktCntro Counter64 .1.3.6.1.4.1.2272.1.85.11.6.1.93 |
rcKhiForwardingCbQeQmAgrNonWredDroppedPktCntro Counter64 .1.3.6.1.4.1.2272.1.85.11.6.1.94 |
rcKhiForwardingCbQeQmError1ro Counter64 .1.3.6.1.4.1.2272.1.85.11.6.1.95 |
rcKhiForwardingIfpTableForwarding Ifp Key Health Indicator MIB - All VSP Data.deprecated SEQUENCE OF RcKhiForwardingIfpEntry .1.3.6.1.4.1.2272.1.85.11.7 |
rcKhiForwardingIfpEntryForwarding Ifp KHI - VSP table entry.deprecated RcKhiForwardingIfpEntry .1.3.6.1.4.1.2272.1.85.11.7.1 |
rcKhiForwardingIfpSlotSlot Numberdeprecated Integer32 .1.3.6.1.4.1.2272.1.85.11.7.1.1 |
rcKhiForwardingIfpIndexIndex of the IFP Ruledeprecated Integer32 .1.3.6.1.4.1.2272.1.85.11.7.1.2 |
rcKhiForwardingIfpNameName of the IFP Rulerodeprecated DisplayString .1.3.6.1.4.1.2272.1.85.11.7.1.3 |
rcKhiForwardingIfpSlice0PortsRange of Ports in slice0 of the slot.
Display format will have Ports 1-24 or 1-8
based on the card typerodeprecated DisplayString .1.3.6.1.4.1.2272.1.85.11.7.1.4 |
rcKhiForwardingIfpSlice0CntCounter for slice 0rodeprecated Counter32 .1.3.6.1.4.1.2272.1.85.11.7.1.5 |
rcKhiForwardingIfpSlice1PortsRange of Ports in slice1 of the slot.
Display format will have Ports 25-48 or 9-16
based on the card typerodeprecated DisplayString .1.3.6.1.4.1.2272.1.85.11.7.1.6 |
rcKhiForwardingIfpSlice1CntCounter for slice 1rodeprecated Counter32 .1.3.6.1.4.1.2272.1.85.11.7.1.7 |
rcKhiForwardingIfpSlice2PortsRange of Ports in slice2 of the slot.
Display format will have Ports 0 or 17-24
based on the card typerodeprecated DisplayString .1.3.6.1.4.1.2272.1.85.11.7.1.8 |
rcKhiForwardingIfpSlice2CntCounter for slice 2rodeprecated Counter32 .1.3.6.1.4.1.2272.1.85.11.7.1.9 |
rcKhiForwardingIfpNewTableForwarding Ifp New Key Health Indicator MIB.
This table replaces the old table
rcKhiForwardingIfpTable SEQUENCE OF RcKhiForwardingIfpNewEntry .1.3.6.1.4.1.2272.1.85.11.8 |
rcKhiForwardingIfpNewEntryForwarding Ifp KHI - VSP table entry. RcKhiForwardingIfpNewEntry .1.3.6.1.4.1.2272.1.85.11.8.1 |
rcKhiForwardingIfpNewSlotSlot Number Integer32 .1.3.6.1.4.1.2272.1.85.11.8.1.1 |
rcKhiForwardingIfpNewTblTypeType of table IFP PCV for both 1G and 10G cards.
IFP PCV MAC-in-MAC Tagged and Untagged are for 10G card Enumeration .1.3.6.1.4.1.2272.1.85.11.8.1.2 |
rcKhiForwardingIfpNewIndexIndex of the IFP Rule Integer32 .1.3.6.1.4.1.2272.1.85.11.8.1.3 |
rcKhiForwardingIfpNewNameName of the IFP Rulero DisplayString .1.3.6.1.4.1.2272.1.85.11.8.1.4 |
rcKhiForwardingIfpNewSlice0PortsRange of Ports in slice0 of the slot.
Display format will have Ports 1-24 or 1-8
based on the card typero DisplayString .1.3.6.1.4.1.2272.1.85.11.8.1.5 |
rcKhiForwardingIfpNewSlice0CntCounter for slice 0ro Counter32 .1.3.6.1.4.1.2272.1.85.11.8.1.6 |
rcKhiForwardingIfpNewSlice1PortsRange of Ports in slice1 of the slot.
Display format will have Ports 25-48 or 9-16
based on the card typero DisplayString .1.3.6.1.4.1.2272.1.85.11.8.1.7 |
rcKhiForwardingIfpNewSlice1CntCounter for slice 1ro Counter32 .1.3.6.1.4.1.2272.1.85.11.8.1.8 |
rcKhiForwardingIfpNewSlice2PortsRange of Ports in slice2 of the slot.
Display format will have Ports 0 or 17-24
based on the card typero DisplayString .1.3.6.1.4.1.2272.1.85.11.8.1.9 |
rcKhiForwardingIfpNewSlice2CntCounter for slice 2ro Counter32 .1.3.6.1.4.1.2272.1.85.11.8.1.10 |
rcKhiCpp OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.85.12 |
rcKhiCppPortStatsClearClear Khi Cpp Port Statistics MIB - All VSP Data.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.85.12.1 |
rcKhiCppIoCopStatsClearClear Khi Cpp Slot Statistics MIB - All VSP Data.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.85.12.2 |
rcKhiCppPortStatsTableKhi Cpp Port Statistics MIB - All VSP Data. SEQUENCE OF RcKhiCppPortStatsEntry .1.3.6.1.4.1.2272.1.85.12.3 |
rcKhiCppPortStatsEntryKhi Cpp Port Statistics - VSP table entry. RcKhiCppPortStatsEntry .1.3.6.1.4.1.2272.1.85.12.3.1 |
rcKhiCppPortStatsPortPort Number-this entry contains information
about packet type, count of Rx and Tx packet InterfaceIndex .1.3.6.1.4.1.2272.1.85.12.3.1.1 |
rcKhiCppPortStatsPacketPacket Type Integer32 .1.3.6.1.4.1.2272.1.85.12.3.1.2 |
rcKhiCppPortStatsPacketNameName of the Packetro DisplayString .1.3.6.1.4.1.2272.1.85.12.3.1.3 |
rcKhiCppPortStatsRxPacketsRx count for a particular Packet Typero Counter64 .1.3.6.1.4.1.2272.1.85.12.3.1.4 |
rcKhiCppPortStatsTxPacketsTx count for a particular Packet Typero Counter64 .1.3.6.1.4.1.2272.1.85.12.3.1.5 |
rcKhiCppIoCopStatsTableKhi Cpp IoCop Statistics MIB - All VSP Data. SEQUENCE OF RcKhiCppIoCopStatsEntry .1.3.6.1.4.1.2272.1.85.12.4 |
rcKhiCppIoCopStatsEntryKhi Cpp IoCop Statistics - VSP table entry. RcKhiCppIoCopStatsEntry .1.3.6.1.4.1.2272.1.85.12.4.1 |
rcKhiCppIoCopStatsSlotSlot Number Integer32 .1.3.6.1.4.1.2272.1.85.12.4.1.1 |
rcKhiCppIoCopStatsMacMgmtRxPacketsMacMgmt Rx Packetsro Counter64 .1.3.6.1.4.1.2272.1.85.12.4.1.2 |
rcKhiCppIoCopStatsIpFixRxPacketsIpFix Rx Packetsro Counter64 .1.3.6.1.4.1.2272.1.85.12.4.1.3 |
rcKhiCppProtocolDrops OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.85.12.5 |
rcKhiCppProtocolDropsClearClear all protocol drop countersrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.85.12.5.1 |
rcKhiCppProtocolDropsDataExpCntData Exp Drop Counterro Counter64 .1.3.6.1.4.1.2272.1.85.12.5.2 |
rcKhiCppProtocolDropsTtlExpCntTtl Exp Drop Counterro Counter64 .1.3.6.1.4.1.2272.1.85.12.5.3 |
rcKhiCppProtocolDropsIpmcDataCntIpmc Data Drop Counterro Counter64 .1.3.6.1.4.1.2272.1.85.12.5.4 |
rcKhiCppProtocolDropsMacLearningCntMac learning Drop Counterro Counter64 .1.3.6.1.4.1.2272.1.85.12.5.5 |
rcKhiCppProtocolDropsIsIsCntIsIs Drop Counterro Counter64 .1.3.6.1.4.1.2272.1.85.12.5.6 |
rcKhiCppProtocolDropsBgpCntBgp Drop Counterro Counter64 .1.3.6.1.4.1.2272.1.85.12.5.7 |
rcKhiCppProtocolDropsRipV1CntRipV1 Drop Counterro Counter64 .1.3.6.1.4.1.2272.1.85.12.5.8 |
rcKhiCppProtocolDropsRipV2CntRipV2 Drop Counterro Counter64 .1.3.6.1.4.1.2272.1.85.12.5.9 |
rcKhiCppProtocolDropsOspfMcCntOspf Mc Drop Counterro Counter64 .1.3.6.1.4.1.2272.1.85.12.5.10 |
rcKhiCppProtocolDropsFtpCntFtp Drop Counterro Counter64 .1.3.6.1.4.1.2272.1.85.12.5.11 |
rcKhiCppProtocolDropsTftpCntTftp Drop Counterro Counter64 .1.3.6.1.4.1.2272.1.85.12.5.12 |
rcKhiCppProtocolDropsSnmpCntSnmp Drop Counterro Counter64 .1.3.6.1.4.1.2272.1.85.12.5.13 |
rcKhiCppProtocolDropsTelnetCntTelnet Drop Counterro Counter64 .1.3.6.1.4.1.2272.1.85.12.5.14 |
rcKhiCppProtocolDropsSshCntSsh Drop Counterro Counter64 .1.3.6.1.4.1.2272.1.85.12.5.15 |
rcKhiCppProtocolDropsRshCntRsh Drop Counterro Counter64 .1.3.6.1.4.1.2272.1.85.12.5.16 |
rcKhiCppProtocolDropsIstCtlCntIstCtl Drop Counterro Counter64 .1.3.6.1.4.1.2272.1.85.12.5.17 |
rcKhiCppProtocolDropsRadiusCntRadius Drop Counterro Counter64 .1.3.6.1.4.1.2272.1.85.12.5.18 |
rcKhiCppProtocolDropsNtpCntNtp Drop Counterro Counter64 .1.3.6.1.4.1.2272.1.85.12.5.19 |
rcKhiCppProtocolDropsDhcpCntDhcp Drop Counterro Counter64 .1.3.6.1.4.1.2272.1.85.12.5.20 |
rcKhiCppProtocolDropsIcmpV4CntIcmpV4 Drop Counterro Counter64 .1.3.6.1.4.1.2272.1.85.12.5.21 |
rcKhiCppProtocolDropsIcmpV6CntIcmpV6 Drop Counterro Counter64 .1.3.6.1.4.1.2272.1.85.12.5.22 |
rcKhiCppProtocolDropsIgmpCntIgmp Drop Counterro Counter64 .1.3.6.1.4.1.2272.1.85.12.5.23 |
rcKhiCppProtocolDropsPimMcCntPim Mc Drop Counterro Counter64 .1.3.6.1.4.1.2272.1.85.12.5.24 |
rcKhiCppProtocolDropsVrrpCntVrrp Drop Counterro Counter64 .1.3.6.1.4.1.2272.1.85.12.5.25 |
rcKhiCppProtocolDropsArpReqCntArp Req Drop Counterro Counter64 .1.3.6.1.4.1.2272.1.85.12.5.26 |
rcKhiCppProtocolDropsArpOtherCntArp Other Drop Counterro Counter64 .1.3.6.1.4.1.2272.1.85.12.5.27 |
rcKhiCppProtocolDropsRarpReqCntRarp Req Drop Counterro Counter64 .1.3.6.1.4.1.2272.1.85.12.5.28 |
rcKhiCppProtocolDropsRarpOtherCntRarp Other Drop Counterro Counter64 .1.3.6.1.4.1.2272.1.85.12.5.29 |
rcKhiCppProtocolDropsSlppCntSlpp Drop Counterro Counter64 .1.3.6.1.4.1.2272.1.85.12.5.30 |
rcKhiCppProtocolDropsBpduCntBpdu Drop Counterro Counter64 .1.3.6.1.4.1.2272.1.85.12.5.31 |
rcKhiCppProtocolDropsTdpCntTdp Drop Counterro Counter64 .1.3.6.1.4.1.2272.1.85.12.5.32 |
rcKhiCppProtocolDropsEapCntEap Drop Counterro Counter64 .1.3.6.1.4.1.2272.1.85.12.5.33 |
rcKhiCppProtocolDropsLacpCntLacp Drop Counterro Counter64 .1.3.6.1.4.1.2272.1.85.12.5.34 |
rcKhiCppProtocolDropsVlacpCntVlacp Drop Counterro Counter64 .1.3.6.1.4.1.2272.1.85.12.5.35 |
rcKhiCppProtocolDropsMldV2CntMld V2 Drop Counterro Counter64 .1.3.6.1.4.1.2272.1.85.12.5.36 |
rcKhiCppProtocolDropsLldpCntLldp Drop Counterro Counter64 .1.3.6.1.4.1.2272.1.85.12.5.37 |
rcKhiCppProtocolDropsHttpCntHttp Drop Counterro Counter64 .1.3.6.1.4.1.2272.1.85.12.5.38 |
rcKhiCppProtocolDropsPimUcCntPim Uc Drop Counterro Counter64 .1.3.6.1.4.1.2272.1.85.12.5.39 |
rcKhiCppProtocolDropsOspfUcCntOspf Uc Drop Counterro Counter64 .1.3.6.1.4.1.2272.1.85.12.5.40 |
rcKhiCppProtocolDropsDnsCntDns Drop Counterro Counter64 .1.3.6.1.4.1.2272.1.85.12.5.41 |
rcKhiCppProtocolDropsIcmpBcCntIcmp Bc Drop Counterro Counter64 .1.3.6.1.4.1.2272.1.85.12.5.42 |
rcKhiCppProtocolDropsIpfixCntIpfix Drop Counterro Counter64 .1.3.6.1.4.1.2272.1.85.12.5.43 |
rcKhiCppProtocolDropsTestPktCntTest Pkt Drop Counterro Counter64 .1.3.6.1.4.1.2272.1.85.12.5.44 |
rc2k OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.100 |
rc2kChassis OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.100.1 |
rc2kChassisPortOperStatusA bit array that contains the oper-status
of the ports in the device. 2 bits are used
for each port. The high order 2 bits of the
first octet represent port #0, the next two
bits are used for port #1, etc. The status
is encoded with the following scheme :
value meaning
-
0 no-link (admin=up, oper=down)
1 up (admin=up, oper=up)
2 down (admin=down, oper=down)
3 testing (admin=test, oper=test)ro OCTET STRING .1.3.6.1.4.1.2272.1.100.1.1 |
rc2kChassisTemperatureUsed to indicate the core operating temperature
of the chassis. This value represents the degree
in celsius of the air inside the chassis.ro Gauge32 .1.3.6.1.4.1.2272.1.100.1.2 |
rc2kChassisBaseMacAddrbase mac addrro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2272.1.100.1.5 |
rc2kChassisMacAddrCapacityMac Address Capacityro Integer32 .1.3.6.1.4.1.2272.1.100.1.6 |
rc2kChassisSystemTempLedColorUsed to indicate the led color of the system temperature
which is under or above the threshold. The threshold is 60 degree
in celsius.
'green' menas normal. And temperature under threshold.
'red' means one of the zone temperature is above the threshold.
'amber' is the initial state, means device have not start to
chekc the temperature yet.ro Enumeration .1.3.6.1.4.1.2272.1.100.1.10 |
rc2kCpuSerialPortTable2k CPU Serial Port table SEQUENCE OF Rc2kCpuSerialPortEntry .1.3.6.1.4.1.2272.1.100.3 |
rc2kCpuSerialPortEntryEntry containing information of 2k CPU Serial Port Rc2kCpuSerialPortEntry .1.3.6.1.4.1.2272.1.100.3.1 |
rc2kCpuSerialPortIfIndexIfIndex for this port.ro InterfaceIndex .1.3.6.1.4.1.2272.1.100.3.1.1 |
rc2kCpuSerialPortDescrPort description.ro DisplayString .1.3.6.1.4.1.2272.1.100.3.1.2 |
rc2kCpuSerialPortModeUsed to configure the mode this port should
operate in.rw Enumeration .1.3.6.1.4.1.2272.1.100.3.1.3 |
rc2kCpuSerialPortAdminStatusUsed to configure the administrative status
setting for this port.rw Enumeration .1.3.6.1.4.1.2272.1.100.3.1.4 |
rc2kCpuSerialPortOperStatusUsed to indicate the operational status
setting for this port.ro Enumeration .1.3.6.1.4.1.2272.1.100.3.1.5 |
rc2kCpuSerialPortBaudRateUsed to configure the baud rate of this port.rw Enumeration .1.3.6.1.4.1.2272.1.100.3.1.6 |
rc2kCpuSerialPortDataBitsUsed to configure the number of data bits, per
byte of data, this port should send/receive.rw Enumeration .1.3.6.1.4.1.2272.1.100.3.1.7 |
rc2kCpuSerialPortMyAddrUsed to configure this port's IP address.
Used for both 'slip' and 'ppp' modes.rw IpAddress .1.3.6.1.4.1.2272.1.100.3.1.8 |
rc2kCpuSerialPortPeerAddrUsed to configure the peer's IP address.
Used for both 'slip' and 'ppp' modes.rw IpAddress .1.3.6.1.4.1.2272.1.100.3.1.9 |
rc2kCpuSerialPortSlipMtuUsed to configure the MTU for this port.
Used for slip only.rw INTEGER .1.3.6.1.4.1.2272.1.100.3.1.10 |
rc2kCpuSerialPortSlipTxRxCompressUsed to enable/disable compression of TCP/IP
packet headers on this port. Used for slip only.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.100.3.1.11 |
rc2kCpuSerialPortSlipRxCompressUsed to enable/disable compression for receiving
packets on this port. Used for slip only.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.100.3.1.12 |
rc2kCpuSerialPortPppConfigFileUsed to configure the configuration file to use
for PPP.rw OCTET STRING .1.3.6.1.4.1.2272.1.100.3.1.13 |
rc2kDevice OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.100.4 |
rc2kDeviceGlobalTable2k CPU Ethernet Port table SEQUENCE OF Rc2kDeviceGlobalEntry .1.3.6.1.4.1.2272.1.100.4.1 |
rc2kDeviceGlobalEntryEntry containing information of 2k CPU Ethernet Port Rc2kDeviceGlobalEntry .1.3.6.1.4.1.2272.1.100.4.1.1 |
rc2kDeviceGlobalSlotslot numberro INTEGER .1.3.6.1.4.1.2272.1.100.4.1.1.1 |
rc2kDeviceGlobalFlashBytesUsedbytes usedro Integer32 .1.3.6.1.4.1.2272.1.100.4.1.1.2 |
rc2kDeviceGlobalFlashBytesFreebytes freero Integer32 .1.3.6.1.4.1.2272.1.100.4.1.1.3 |
rc2kDeviceGlobalFlashNumFiles# files in flashro Integer32 .1.3.6.1.4.1.2272.1.100.4.1.1.4 |
rc2kDeviceGlobalPcmciaBytesUsedbytes usedro Integer32 .1.3.6.1.4.1.2272.1.100.4.1.1.5 |
rc2kDeviceGlobalPcmciaBytesFreebytes freero Integer32 .1.3.6.1.4.1.2272.1.100.4.1.1.6 |
rc2kDeviceGlobalPcmciaNumFiles# files in pcmciaro Integer32 .1.3.6.1.4.1.2272.1.100.4.1.1.7 |
rc2kDeviceGlobalActionnone(1), resetPcmcia(2), ..rw Enumeration .1.3.6.1.4.1.2272.1.100.4.1.1.8 |
rc2kDeviceGlobalResultUsed to indicate the result of the last action
performed on one of the system's device.ro Enumeration .1.3.6.1.4.1.2272.1.100.4.1.1.9 |
rc2kDeviceGlobalUsbBytesUsedbytes used in USBro Counter64 .1.3.6.1.4.1.2272.1.100.4.1.1.13 |
rc2kDeviceGlobalUsbBytesFreebytes free in USBro Counter64 .1.3.6.1.4.1.2272.1.100.4.1.1.14 |
rc2kDeviceGlobalUsbNumFiles# files in USBro Integer32 .1.3.6.1.4.1.2272.1.100.4.1.1.15 |
rc2kDeviceGlobalExtflashBytesUsedbytes used in Extflashro Counter64 .1.3.6.1.4.1.2272.1.100.4.1.1.16 |
rc2kDeviceGlobalExtflashBytesFreebytes free in Extflashro Counter64 .1.3.6.1.4.1.2272.1.100.4.1.1.17 |
rc2kDeviceGlobalExtflashNumFiles# files in Extflashro Integer32 .1.3.6.1.4.1.2272.1.100.4.1.1.18 |
rc2kDeviceSeparator1This leaf is used to provide a separation between
tables. No meaningful information is stored in this
variable.ro Integer32 .1.3.6.1.4.1.2272.1.100.4.2 |
rc2kDeviceFlashFileTable2k Flash table SEQUENCE OF Rc2kDeviceFlashFileEntry .1.3.6.1.4.1.2272.1.100.4.3 |
rc2kDeviceFlashFileEntryEntry containing information of 2k CPU Serial Port Rc2kDeviceFlashFileEntry .1.3.6.1.4.1.2272.1.100.4.3.1 |
rc2kDeviceFlashFileSlotslot numberro INTEGER .1.3.6.1.4.1.2272.1.100.4.3.1.1 |
rc2kDeviceFlashFileNamename of filero DisplayString .1.3.6.1.4.1.2272.1.100.4.3.1.2 |
rc2kDeviceFlashFileDatedatero DisplayString .1.3.6.1.4.1.2272.1.100.4.3.1.3 |
rc2kDeviceFlashFileSizesize in bytesro Integer32 .1.3.6.1.4.1.2272.1.100.4.3.1.4 |
rc2kDevicePcmciaPresentpcmcia is a slower device. This leaf is used to
stop the access into pcmcia file table when it
got the end of flash file table.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.100.4.4 |
rc2kDeviceSeparator2This leaf is used to provide a separation between
tables. No meaningful information is stored in this
variable.ro Integer32 .1.3.6.1.4.1.2272.1.100.4.6 |
rc2kDeviceExtflashFileTable2k Flash table SEQUENCE OF Rc2kDeviceExtflashFileEntry .1.3.6.1.4.1.2272.1.100.4.9 |
rc2kDeviceExtflashFileEntryEntry containing information of extflash files Rc2kDeviceExtflashFileEntry .1.3.6.1.4.1.2272.1.100.4.9.1 |
rc2kDeviceExtflashFileSlotslot number Integer32 .1.3.6.1.4.1.2272.1.100.4.9.1.1 |
rc2kDeviceExtflashFileNamename of file DisplayString .1.3.6.1.4.1.2272.1.100.4.9.1.2 |
rc2kDeviceExtflashFileDatedatero DisplayString .1.3.6.1.4.1.2272.1.100.4.9.1.3 |
rc2kDeviceExtflashFileSizesize in bytesro Unsigned32 .1.3.6.1.4.1.2272.1.100.4.9.1.4 |
rc2kDeviceUsbFileTable2k Usb table SEQUENCE OF Rc2kDeviceUsbFileEntry .1.3.6.1.4.1.2272.1.100.4.10 |
rc2kDeviceUsbFileEntryEntry containing information of USB files Rc2kDeviceUsbFileEntry .1.3.6.1.4.1.2272.1.100.4.10.1 |
rc2kDeviceUsbFileSlotslot number Integer32 .1.3.6.1.4.1.2272.1.100.4.10.1.1 |
rc2kDeviceUsbFileNamename of file DisplayString .1.3.6.1.4.1.2272.1.100.4.10.1.2 |
rc2kDeviceUsbFileDatedatero DisplayString .1.3.6.1.4.1.2272.1.100.4.10.1.3 |
rc2kDeviceUsbFileSizesize in bytesro Unsigned32 .1.3.6.1.4.1.2272.1.100.4.10.1.4 |
rc2kBootConfigTable2k Boot Configuration table SEQUENCE OF Rc2kBootConfigEntry .1.3.6.1.4.1.2272.1.100.5 |
rc2kBootConfigEntryEntry containing boot configuration information. Rc2kBootConfigEntry .1.3.6.1.4.1.2272.1.100.5.1 |
rc2kBootConfigSlotslot number, VSP uses 1,2ro INTEGER .1.3.6.1.4.1.2272.1.100.5.1.1 |
rc2kBootConfigLastBootConfigSourceboot config sourcero DisplayString .1.3.6.1.4.1.2272.1.100.5.1.2 |
rc2kBootConfigLastRuntimeImageSourceruntime image sourcero DisplayString .1.3.6.1.4.1.2272.1.100.5.1.3 |
rc2kBootConfigLastRuntimeConfigSourceruntime config sourcero DisplayString .1.3.6.1.4.1.2272.1.100.5.1.4 |
rc2kBootConfigPrimaryImageSourceimage sourcerw DisplayString .1.3.6.1.4.1.2272.1.100.5.1.5 |
rc2kBootConfigPrimaryConfigSourceconfig sourcerw DisplayString .1.3.6.1.4.1.2272.1.100.5.1.6 |
rc2kBootConfigSecondaryImageSourceimage sourcerw DisplayString .1.3.6.1.4.1.2272.1.100.5.1.7 |
rc2kBootConfigSecondaryConfigSourceconfig sourcerw DisplayString .1.3.6.1.4.1.2272.1.100.5.1.8 |
rc2kBootConfigTertiaryImageSourceimage sourcerw DisplayString .1.3.6.1.4.1.2272.1.100.5.1.9 |
rc2kBootConfigTertiaryConfigSourceconfig sourcerw DisplayString .1.3.6.1.4.1.2272.1.100.5.1.10 |
rc2kBootConfigEnableAutoBootauto boot moderw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.100.5.1.11 |
rc2kBootConfigEnableFactoryDefaultsuse factory defaultrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.100.5.1.12 |
rc2kBootConfigEnableDebugModedebug moderw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.100.5.1.13 |
rc2kBootConfigEnableHwWatchDogTimerhw watch dog timerrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.100.5.1.14 |
rc2kBootConfigEnableRebootOnErrorreboot on errorrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.100.5.1.15 |
rc2kBootConfigEnableTelnetServertelnet serverrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.100.5.1.16 |
rc2kBootConfigEnableRloginServerrlogin serverrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.100.5.1.17 |
rc2kBootConfigEnableFtpServerftp serverrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.100.5.1.18 |
rc2kBootConfigEnableTftpServertftp serverrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.100.5.1.19 |
rc2kBootConfigSwVersioncurrent sw versionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2272.1.100.5.1.20 |
rc2kBootConfigMulticastConfigProfilemulticast configro INTEGER .1.3.6.1.4.1.2272.1.100.5.1.21 |
rc2kBootConfigEnableSshServerssh serverrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.100.5.1.22 |
rc2kBootConfigEnableAltLedBoot flag for enableing Alternate LEDrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.100.5.1.23 |
rc2kBootConfigPrimaryBackupConfigSourceprimary backup config source (safeconfig)rw DisplayString .1.3.6.1.4.1.2272.1.100.5.1.24 |
rc2kBootConfigSecondaryBackupConfigSourcesecondary backup config source (safeconfig)rw DisplayString .1.3.6.1.4.1.2272.1.100.5.1.25 |
rc2kBootConfigTertiaryBackupConfigSourcetertiary backup config source (safeconfig)rw DisplayString .1.3.6.1.4.1.2272.1.100.5.1.26 |
rc2kBootConfigEnable8616ReAutonegEnable re-autoneg for 8616SX Cards (Intel GMAC fix)rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.100.5.1.27 |
rc2kBootConfigMezzImageSourceMezz image sourcerw DisplayString .1.3.6.1.4.1.2272.1.100.5.1.28 |
rc2kBootConfigEnableMezzEnable/disable Mezz Flagrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.100.5.1.29 |
rc2kCardTable2k Card table SEQUENCE OF Rc2kCardEntry .1.3.6.1.4.1.2272.1.100.6 |
rc2kCardEntryEntry containing information of 2k Card Rc2kCardEntry .1.3.6.1.4.1.2272.1.100.6.1 |
rc2kCardIndexslot number.ro INTEGER .1.3.6.1.4.1.2272.1.100.6.1.1 |
rc2kCardFrontTypeUsed to indicate card types in the Accelar
8000 product families.
For Accelar 8000 devices, all cards use
an encoded value according to the following rule:
| 6 | 1 | 5 | 4 | 1 | 3 | 4 | 8 |
+-+-+++
bits : |31-26 | 25 | 24-20 | 19-16 | 15 | 14-12 | 11-8 | 7-0 |
+-+-++++
field : | a | b | c | d | e | f | g | h |
+-+-++++
a : Family type/Product line (6 bits (5 bits usuable) (was 4 bits))
MSB bit31 should not be used (MIB compiler fails)
0x0-00 = 0000-00 = Reserved
0x1-00 = 0001-00 = Monoploy non specific (e.g backplane, psu, fans)
0x2-00 = 0010-00 = Boardwalk
0x2-01 = 0010-01 = Power Ranger
0x3-00 = 0011-00 = Marvin Gardens
0x4-00 = 0100-00 = Cobalt Blue (was Thunderbolt and Pacific before that - both are obsolete)
0x5-00 = 0101-00 = PP8300 (was ParkPlace)
0x6-00 = 0110-00 = Central Office (only used in chassis)
0x7-00 = 0111-00 = Alteon WebSystems
b : Interface / Device type variation: (Were 3 bits, 2 bits taken by family)
0x1 = 0 = Non M-Module
0x1 = 1 = M-module (128K RARU records)
c : Interface / device type: (5 bits)
0x0 = 00000 = CPU
0x1 = 00001 = Switch fabric
0x2 = 00010 = Copper Ethernet
0x3 = 00011 = Fiber Ethernet
0x4 = 00100 = Sonet (Packets)
0x5 = 00101 = ATM
0x6 = 00110 = Token Ring
0x7 = 00111 = RMON
0x8 = 01000 = BFM (Frame or cells indicated by field 'a' above)
0x9 = 01001 = PSU
0xa = 01010 = Fan Tray
0xb = 01011 = Chassis/Backplane
0xc = 01100 = CPU Mezz
0xd = 01101 = SSL
0xe = 01110 = LaunchPad
0xf = 01111 = Chassis/Midplane
0x10 = 10000 = Auxillary Card
0x11 = 10001 = reserved for future
0x12 = 10010 = reserved for future
0x13 = 10011 = WSM Fiber Ethernet
d : Maximum speed (highest negotiable speed) (4 bits)
0x0 = 0000 = 10 Mbit
0x1 = 0001 = 100 Mbit
0x2 = 0010 = 1 Gbit
0x3 = 0011 = 10 Gbit
0x4 = 0100 = OC-3
0x5 = 0101 = OC-12
0x6 = 0110 = OC-48
0x7 = 0111 = OC-92
0x8 = 1000 = OC-192
0x9 = 1001 = 4 Mbit (TR)
0xa = 1010 = 16 Mbit (TR)
0xb = 1011 = E3
0xc = 1100 = DS1
0xd = 1101 = DS3
0xe = 1110 = none (no PHY interfaces on board)
0xf = 1111 = Max speed indicated implicitly in field (c) (for expansion)
e : AM&OM-06/28/2006: This bit was originally used to indicate port redundancy.
For PR it is used as a differentiator between Boomslang (0) and Copperhead (1).
0=non-redundant, 1=redundant; (1 bit)
f : Card specific info. (3 bits)
For Gigabit used as follows:
000=short-haul (SX)
010=long-haul (LX)
100=extra-distance (DX)
101=GBIC
110=SFP
For 10 Gigabit used as follws
000 = 10GE WAN serial 1310nm (XLW)
001 = 10GE WAN serial 1550nm (XEW)
100 = 10GE LAN serial 1310nm (XLR)
101 = 10GE LAN serial 1550nm (XER)
011 = 10GE LAN/WAN (XZW)
For ATM/Sonet used as follows
000 = multi mode
001 = single mode
010 = single or multimode
011 = not applicable (e.g., copper has no mode)
For Marvin Gardens, indicates number of MDA slots
000 = none
001 = one option slots
010 = two option slots
011 = three option slots
For Power Supplies:
000 = AC PSU
001 = DC PSU
For SSL:
000 = server offloading
001 = end to end encryption
For WSM:
000 = WSM mode
001 = ASFM mode
For SF:
000 = 3200 card
001 = 9600 card
For Copper Ethernet:
000: no POE
001: POE
For FAN Tray:
000: CP
001: IO
For Objects with no options:
000: CPU, Mezz, OPM, SAS, IPFIX
g : Chassis type (4 bits, possibly MSB 2 bits are extension of field b)
0x0 = 00-00 = work-group (single card switches, etc)
0x1 = 00-01 = back-bone (chassis based products)
0x2 = 00-10 = MDA (option modules)
0x3 = 00-10 = mid-plane (chassis based products)
h : Number of ports (binary representation obmited) (8 bits)
(for ACIM/BFM cards, this is number of octapids/blackbirds/dea)
0x00 = no ports (CPs, SFs, PS's, etc)
0x01 = 1-port,
0x02 = 2-port,
0x04 = 4-port,
0x06 = 6-port,
0x08 = 8-port,
0x0c = 12-port,
0x10 = 16-port,
0x18 = 24-port,
0x22 = 36-port,
0x30 = 48-port,
0x40 = 64-port.
0x80 = 128-port.ro Enumeration .1.3.6.1.4.1.2272.1.100.6.1.2 |
rc2kCardFrontDescriptiondescriptionro DisplayString .1.3.6.1.4.1.2272.1.100.6.1.3 |
rc2kCardFrontAdminStatusUsed to indicate the administrative status of this
cardrw Enumeration .1.3.6.1.4.1.2272.1.100.6.1.4 |
rc2kCardFrontOperStatusUsed to indicate the operational status of this card.ro Enumeration .1.3.6.1.4.1.2272.1.100.6.1.5 |
rc2kCardFrontSerialNummanufacturer serial number of cardro DisplayString .1.3.6.1.4.1.2272.1.100.6.1.6 |
rc2kCardFrontPartNumbermanufacturer part number of cardro DisplayString .1.3.6.1.4.1.2272.1.100.6.1.8 |
rc2kCardFrontDateCodemanufacturer date codero DisplayString .1.3.6.1.4.1.2272.1.100.6.1.9 |
rc2kCardFrontDeviationsdeviationsro DisplayString .1.3.6.1.4.1.2272.1.100.6.1.10 |
rc2kCardFrontMacAddrbase mac addressro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2272.1.100.6.1.11 |
rc2kCardBackTypeRefer to rc2kCardFrontType for the encoding schemero Enumeration .1.3.6.1.4.1.2272.1.100.6.1.12 |
rc2kCardBackDescriptioncustomer card descriptionro DisplayString .1.3.6.1.4.1.2272.1.100.6.1.13 |
rc2kCardBackSerialNumcustomer serial number of cardro DisplayString .1.3.6.1.4.1.2272.1.100.6.1.14 |
rc2kCardBackHwVersionhardware versionro DisplayString .1.3.6.1.4.1.2272.1.100.6.1.15 |
rc2kCardBackPartNumbercustomer part numberro DisplayString .1.3.6.1.4.1.2272.1.100.6.1.16 |
rc2kCardBackDateCodecustomer date codero DisplayString .1.3.6.1.4.1.2272.1.100.6.1.17 |
rc2kCardBackDeviationscustomer deviationsro DisplayString .1.3.6.1.4.1.2272.1.100.6.1.18 |
rc2kCardASICDescrASIC descriptorro DisplayString .1.3.6.1.4.1.2272.1.100.6.1.21 |
rc2kCardSmltOnSingleCpSupportedUsed to indicate whether an IO card is updated to
support SMLT on single Cp feature or not.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.100.6.1.23 |
rc2kCardSlotPriorityUsed to indicate the priority of the slot for power
management. It will take effect only after reboot.rw Enumeration .1.3.6.1.4.1.2272.1.100.6.1.29 |
rc2kCardSlotOriginalPriorityPriority of the slot for power management which the
swtich has currently booted with. It will remain the
same until the next reboot.ro Enumeration .1.3.6.1.4.1.2272.1.100.6.1.30 |
rc2kCardSlotPowerAdministrately turn on or off power on this slot.
it only applicable on Standby CP & IO and SF Cardrw Enumeration .1.3.6.1.4.1.2272.1.100.6.1.32 |
rc2kCopyFile OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.100.7 |
rc2kCopyFileSourcesource filerw OCTET STRING .1.3.6.1.4.1.2272.1.100.7.1 |
rc2kCopyFileDestinationdest filerw OCTET STRING .1.3.6.1.4.1.2272.1.100.7.2 |
rc2kCopyFileActionstart or cancellrw Enumeration .1.3.6.1.4.1.2272.1.100.7.3 |
rc2kCopyFileResultresultro Enumeration .1.3.6.1.4.1.2272.1.100.7.4 |
rc2kQos OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.100.8 |
rc2kQosIngressTagToQosTableThis table is used to specify the 802.1P
to QOS (802.1P->QOS) mapping on packet
ingress. SEQUENCE OF Rc2kQosIngressTagToQosEntry .1.3.6.1.4.1.2272.1.100.8.2 |
rc2kQosIngressTagToQosEntryEntry containing information of 8021P->Qos mapping Rc2kQosIngressTagToQosEntry .1.3.6.1.4.1.2272.1.100.8.2.1 |
rc2kQosIngressTagToQosRowUsed to uniquely identify a row in this table.ro INTEGER .1.3.6.1.4.1.2272.1.100.8.2.1.1 |
rc2kQosIngressTagToQosInIeee8021P802.1Pro INTEGER .1.3.6.1.4.1.2272.1.100.8.2.1.2 |
rc2kQosIngressTagToQosQosLevelQos levelrw INTEGER .1.3.6.1.4.1.2272.1.100.8.2.1.3 |
rc2kQosEgressQosToTagTableThis table is used to specify the QOS to
802.1P (QOS->802.1P) mapping on packet
egress. SEQUENCE OF Rc2kQosEgressQosToTagEntry .1.3.6.1.4.1.2272.1.100.8.4 |
rc2kQosEgressQosToTagEntryEntry containing information of Qos->Qos mapping Rc2kQosEgressQosToTagEntry .1.3.6.1.4.1.2272.1.100.8.4.1 |
rc2kQosEgressQosToTagRowUsed to uniquely identify a row in this table.ro INTEGER .1.3.6.1.4.1.2272.1.100.8.4.1.1 |
rc2kQosEgressQosToTagQosLevelqos levelro INTEGER .1.3.6.1.4.1.2272.1.100.8.4.1.2 |
rc2kQosEgressQosToTagOutIeee8021P802.1Prw INTEGER .1.3.6.1.4.1.2272.1.100.8.4.1.3 |
rc2kQosTrafficProfileTableThis table is used to specify traffic profiles
for the system. These traffic profiles are
used for policying purposes to guarantee streams
of traffic do not egress the system above a
certain rate. These traffic profiles are applied
in the 'rcIpFilterTable'. SEQUENCE OF Rc2kQosTrafficProfileEntry .1.3.6.1.4.1.2272.1.100.8.6 |
rc2kQosTrafficProfileEntryEntry containing information of Qos->Qos mapping Rc2kQosTrafficProfileEntry .1.3.6.1.4.1.2272.1.100.8.6.1 |
rc2kQosTrafficProfileIdProfile idro INTEGER .1.3.6.1.4.1.2272.1.100.8.6.1.1 |
rc2kQosTrafficProfileNameProfile namerw DisplayString .1.3.6.1.4.1.2272.1.100.8.6.1.2 |
rc2kQosTrafficProfileEnableEnable this entryrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.100.8.6.1.3 |
rc2kQosTrafficProfileTranslateDscpEnableUsed to specify whether translation of the DSCP
field should be performed. If enabled, the value
in the DSCP field for packets that fall within
the traffic profile will get translated to
'rc2kQosTrafficProfileInProfileDscp'. Packets
that fall outside the traffic profile will get
translated to 'rc2kQosTrafficProfileOutProfileDscp'.
If disabled, no translation is performed.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.100.8.6.1.4 |
rc2kQosTrafficProfileInProfileDscpUsed to specify the DSCP value for 'good' packets.rw DisplayString .1.3.6.1.4.1.2272.1.100.8.6.1.5 |
rc2kQosTrafficProfileOutProfileDscpUsed to specify the DSCP value for 'violation'
packets.rw DisplayString .1.3.6.1.4.1.2272.1.100.8.6.1.6 |
rc2kQosTrafficProfileDiscardEnableUsed to specify whether packets that fall outside
the traffic profile should be discarded.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.100.8.6.1.7 |
rc2kQosTrafficProfileAverageRateAverage rate in packets per second.rw Integer32 .1.3.6.1.4.1.2272.1.100.8.6.1.8 |
rc2kQosTrafficProfileRowStatusUsed to create/delete entries.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.100.8.6.1.10 |
rc2kQosIngressDscpToQosTableThis table is used to specify the DSCP to
QOS (Dscp->QOS) mapping on packet ingress. SEQUENCE OF Rc2kQosIngressDscpToQosEntry .1.3.6.1.4.1.2272.1.100.8.7 |
rc2kQosIngressDscpToQosEntryEntry containing information of Dscp->Qos mapping Rc2kQosIngressDscpToQosEntry .1.3.6.1.4.1.2272.1.100.8.7.1 |
rc2kQosIngressDscpToQosRowUsed to uniquely identify a row in this table.ro INTEGER .1.3.6.1.4.1.2272.1.100.8.7.1.1 |
rc2kQosIngressDscpToQosInDscpA 6-bit value used to define the Differentiated
Service Code Point(DSCP).ro INTEGER .1.3.6.1.4.1.2272.1.100.8.7.1.2 |
rc2kQosIngressDscpToQosInDscpBinaryFormatThe 'rc2kQosIngressDscpToQosInDscp' value shown
in a binary format (network order).ro DisplayString .1.3.6.1.4.1.2272.1.100.8.7.1.3 |
rc2kQosIngressDscpToQosQosLevelqos levelrw INTEGER .1.3.6.1.4.1.2272.1.100.8.7.1.4 |
rc2kQosEgressQosToDscpTableThis table is used to specify the QOS to
DSCP field (QOS->DsField) mapping on packet
egress. SEQUENCE OF Rc2kQosEgressQosToDscpEntry .1.3.6.1.4.1.2272.1.100.8.8 |
rc2kQosEgressQosToDscpEntryEntry containing information of Qos->Qos mapping Rc2kQosEgressQosToDscpEntry .1.3.6.1.4.1.2272.1.100.8.8.1 |
rc2kQosEgressQosToDscpRowUsed to uniquely identify a row in this table.ro INTEGER .1.3.6.1.4.1.2272.1.100.8.8.1.1 |
rc2kQosEgressQosToDscpQosLevelqos levelro INTEGER .1.3.6.1.4.1.2272.1.100.8.8.1.2 |
rc2kQosEgressQosToDscpOutDscpA 6-bit value used to define the Differentiated
Service Code Point(DSCP).rw INTEGER .1.3.6.1.4.1.2272.1.100.8.8.1.3 |
rc2kQosEgressQosToDscpOutDscpBinaryFormatThe 'rc2kQosEgressQosToDscpOutDscp' value show
in a binary format (network order).ro DisplayString .1.3.6.1.4.1.2272.1.100.8.8.1.4 |
rc2kAtm OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.100.9 |
rc2kAtmGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.100.9.1 |
rc2kAtmPortTableATM port table SEQUENCE OF Rc2kAtmPortEntry .1.3.6.1.4.1.2272.1.100.9.2 |
rc2kAtmPortEntryEntry containing information of ATM port Rc2kAtmPortEntry .1.3.6.1.4.1.2272.1.100.9.2.1 |
rc2kAtmPortIfIndexport numberro InterfaceIndex .1.3.6.1.4.1.2272.1.100.9.2.1.1 |
rc2kAtmPortNumVpiBits# of vpi bits. For OC3, the max number of vpibits is 6.
However, for OC12, it is 8. Both media types share
the same MIB object.rw INTEGER .1.3.6.1.4.1.2272.1.100.9.2.1.2 |
rc2kAtmPortNumVciBits# of vci bitsrw INTEGER .1.3.6.1.4.1.2272.1.100.9.2.1.3 |
rc2kAtmPortMediaTypemedia typero Enumeration .1.3.6.1.4.1.2272.1.100.9.2.1.4 |
rc2kAtmPortScrambleEnableenable scramblerw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.100.9.2.1.5 |
rc2kAtmPortFramingModeport framing moderw Enumeration .1.3.6.1.4.1.2272.1.100.9.2.1.6 |
rc2kAtmPortClockSourceclock sourcerw Enumeration .1.3.6.1.4.1.2272.1.100.9.2.1.7 |
rc2kAtmPortLineSpeedline speedro Enumeration .1.3.6.1.4.1.2272.1.100.9.2.1.8 |
rc2kAtmPortLoopBackModeloop back moderw Enumeration .1.3.6.1.4.1.2272.1.100.9.2.1.9 |
rc2kAtmPortMacAddressXLR assigned MAC addrro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2272.1.100.9.2.1.10 |
rc2kAtmPvcTableATM Pvc table SEQUENCE OF Rc2kAtmPvcEntry .1.3.6.1.4.1.2272.1.100.9.3 |
rc2kAtmPvcEntryEntry containing information of ATM Pvc Rc2kAtmPvcEntry .1.3.6.1.4.1.2272.1.100.9.3.1 |
rc2kAtmPvcIfIndexport numberro InterfaceIndex .1.3.6.1.4.1.2272.1.100.9.3.1.1 |
rc2kAtmPvcVpivpi of this pvcro INTEGER .1.3.6.1.4.1.2272.1.100.9.3.1.2 |
rc2kAtmPvcVcivci of this pvcro INTEGER .1.3.6.1.4.1.2272.1.100.9.3.1.3 |
rc2kAtmPvcPvcIdinternal pvc idro Integer32 .1.3.6.1.4.1.2272.1.100.9.3.1.4 |
rc2kAtmPvcNamename of pvcrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2272.1.100.9.3.1.5 |
rc2kAtmPvcEncapsulationencapsulationrw Enumeration .1.3.6.1.4.1.2272.1.100.9.3.1.6 |
rc2kAtmPvcServiceTypeservice typerw Enumeration .1.3.6.1.4.1.2272.1.100.9.3.1.7 |
rc2kAtmPvcPeakCellRatePeak cell rate in cells per second. The maximum
peak cell rate is half of the line rate. The peak
cell rate for MDA type OC12 must be less than 733491.
However, for OC3, it is less than 182783.rw INTEGER .1.3.6.1.4.1.2272.1.100.9.3.1.8 |
rc2kAtmPvcSustainedCellRateSustained cell rate in cells per second. The maximum
peak cell rate is half of the line rate. The peak
cell rate for MDA type OC12 must be less than 733491.
However, for OC3, it is less than 182783.rw INTEGER .1.3.6.1.4.1.2272.1.100.9.3.1.9 |
rc2kAtmPvcMaxBurstSizemax burst sizerw INTEGER .1.3.6.1.4.1.2272.1.100.9.3.1.10 |
rc2kAtmPvcRowStatusrow statusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.100.9.3.1.11 |
rc2kAtmPvcOamLbMgmtEnableIndicate whether end-to-end F5 OAM loopback is enabled.
When it is enabled, OAM loopback request is sent
periodicallyrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.100.9.3.1.12 |
rc2kAtmPvcOamLbSendFrequencyNumber of seconds between transmitting OAM loopback
requestrw INTEGER .1.3.6.1.4.1.2272.1.100.9.3.1.13 |
rc2kAtmPvcOamLbRetryFrequencyNumber of seconds between retryrw INTEGER .1.3.6.1.4.1.2272.1.100.9.3.1.14 |
rc2kAtmPvcOamLbUpCountNumber of consecutive end-to-end F5 OAM loopback cell
responses that must be received in order to change a
PVC connection state to uprw INTEGER .1.3.6.1.4.1.2272.1.100.9.3.1.15 |
rc2kAtmPvcOamLbDownCountNumber of consecutive end-to-end F5 OAM loopback cell
responses that are not received in order to change a
PVC state to down.rw INTEGER .1.3.6.1.4.1.2272.1.100.9.3.1.16 |
rc2kAtmPvcOamTrapEnableIndicate whether OAM trap is enabled. When it is enabled,
a trap is sent to the management station when
rc2kAtmPvcOamVcStatus is going up or down.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.100.9.3.1.17 |
rc2kAtmPvcOamVcStatusIndicate the status of PVC link.
Not Managed
Down Verify
loopback cells are sent at retry frequency to verify
the VC is really down. After down-count unsuccessful
retries, the VC goes to the down state (see definition
of rc2kAtmPvcOamLoopbackDownCount).
Down
F5 OAM loopback cells.
Up Verify
End-to-end F5 OAM loopback cells are sent at retry
frequency to verify the VC is really up. After up-count
successive and successful loopback retries, the VC
goes to the Up state (see definition of
rc2kAtmPvcOamLoopbackUpCount).
Up - End-to-end loopbacks are successful.ro Enumeration .1.3.6.1.4.1.2272.1.100.9.3.1.18 |
rc2kAtmPvcOamLbRequestSentNumber of OAM loopback request sentro Counter32 .1.3.6.1.4.1.2272.1.100.9.3.1.19 |
rc2kAtmPvcOamLbReplySentNumber of OAM loopback reply sentro Counter32 .1.3.6.1.4.1.2272.1.100.9.3.1.20 |
rc2kAtmPvcOamLbReplyReceivedNumber of OAM loopback reply receivedro Counter32 .1.3.6.1.4.1.2272.1.100.9.3.1.21 |
rc2kAtm1483ElanTableATM 1483Elan table SEQUENCE OF Rc2kAtm1483ElanEntry .1.3.6.1.4.1.2272.1.100.9.5 |
rc2kAtm1483ElanEntryEntry containing information of ATM 1483Elan Rc2kAtm1483ElanEntry .1.3.6.1.4.1.2272.1.100.9.5.1 |
rc2kAtm1483ElanIfIndexport numberro InterfaceIndex .1.3.6.1.4.1.2272.1.100.9.5.1.1 |
rc2kAtm1483ElanElanIdElan Idro Integer32 .1.3.6.1.4.1.2272.1.100.9.5.1.2 |
rc2kAtm1483ElanNumPvcIds# pvc-ids in listro INTEGER .1.3.6.1.4.1.2272.1.100.9.5.1.3 |
rc2kAtm1483ElanPvcIdslist of pvc-ids. each pvc-id is represented by a
32 bit value this field can contain a maximum of
64 pvc-ids.rw IdList .1.3.6.1.4.1.2272.1.100.9.5.1.4 |
rc2kAtm1483ElanVlanIdvlan tag for this 1483rw Integer32 .1.3.6.1.4.1.2272.1.100.9.5.1.5 |
rc2kAtm1483ElanRowStatusrow statusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.100.9.5.1.6 |
rc2kAtm1483ElanConnectTypeconnection typerw Enumeration .1.3.6.1.4.1.2272.1.100.9.5.1.7 |
rc2kAtm1483ElanVlanMacAddressmac for vlanro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2272.1.100.9.5.1.8 |
rc2kAtm1483ElanDummyMacAddressdummy mac for the other routerro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2272.1.100.9.5.1.9 |
rc2kAtm1483ElanLocalIpAddresslocal ip, if ConnectType is ip(2)rw IpAddress .1.3.6.1.4.1.2272.1.100.9.5.1.10 |
rc2kAtm1483ElanRemoteIpAddressremote ip, if ConnectType is ip(2)rw IpAddress .1.3.6.1.4.1.2272.1.100.9.5.1.11 |
rc2kAtm1483ElanInArpSendEnableenable arp sending on the port, if
ConnectType is ip(2)rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.100.9.5.1.12 |
rc2kAtm1483ElanInArpSendIntervalinterval of arp sending on the port, if
ConnectType is ip(2)rw INTEGER .1.3.6.1.4.1.2272.1.100.9.5.1.13 |
rc2kAtm1483ElanIpxVlanEncapMethodvlan encapsulation method, if ConnectType
is ipx(3)rw Enumeration .1.3.6.1.4.1.2272.1.100.9.5.1.14 |
rc2kAtm1483ElanIpxNetworkNumnetwork number, if ConnectType is ipx(3)rw INTEGER .1.3.6.1.4.1.2272.1.100.9.5.1.15 |
rc2kAtm1483ElanStgIdAn identifier used to identify a STG in the device,
only in bridge modero Integer32 .1.3.6.1.4.1.2272.1.100.9.5.1.16 |
rc2kAtm1483ElanrcStgTaggedBpduVlanIdThe VLAN ID to be used for tagging BPDUs,
only in bridge mode.ro Integer32 .1.3.6.1.4.1.2272.1.100.9.5.1.17 |
rc2kAtm1483ElanIpxNetworkAddrnetwork number, instead of rc2kAtm1483ElanIpxNetworkNumrw OCTET STRING .1.3.6.1.4.1.2272.1.100.9.5.1.18 |
rc2kAtmSioCardConfigTable2kAtm Sio Card Config Table SEQUENCE OF Rc2kAtmSioCardConfigEntry .1.3.6.1.4.1.2272.1.100.9.8 |
rc2kAtmSioCardConfigEntryEntry containing information of 2kAtm Sio Card Config. Rc2kAtmSioCardConfigEntry .1.3.6.1.4.1.2272.1.100.9.8.1 |
rc2kAtmSioCardConfigSlotIndexslot Index.ro Integer32 .1.3.6.1.4.1.2272.1.100.9.8.1.1 |
rc2kAtmSioCardConfigActionrw Enumeration .1.3.6.1.4.1.2272.1.100.9.8.1.2 |
rc2kAtmSioCardConfigTraceModerw Enumeration .1.3.6.1.4.1.2272.1.100.9.8.1.3 |
rc2kAtmSioCardConfigImageFileNameATM Image file name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2272.1.100.9.8.1.4 |
rc2kAtmSioCardConfigElanStatsEnableEnable/Disable Elan Statistics collectionrw Enumeration .1.3.6.1.4.1.2272.1.100.9.8.1.5 |
rc2kAtmSioCardConfigStatsPollPeriodTime interval after which Elan statistics would
be polledrw INTEGER .1.3.6.1.4.1.2272.1.100.9.8.1.6 |
rc2kAtmPortStatsTableATM port statistics table SEQUENCE OF Rc2kAtmPortStatsEntry .1.3.6.1.4.1.2272.1.100.9.10 |
rc2kAtmPortStatsEntryEntry containing information of ATM port statistics Rc2kAtmPortStatsEntry .1.3.6.1.4.1.2272.1.100.9.10.1 |
rc2kAtmPortStatsIfIndexport numberro InterfaceIndex .1.3.6.1.4.1.2272.1.100.9.10.1.1 |
rc2kAtmPortStatsInCellsNumber of Cells received from ATM interfacero Counter64 .1.3.6.1.4.1.2272.1.100.9.10.1.2 |
rc2kAtmPortStatsOutCellsNumber of Cells transmitted by ATM interfacero Counter64 .1.3.6.1.4.1.2272.1.100.9.10.1.3 |
rc2kAtmPortStatsOutIdleCellsNumber of Idle Cells transmittedro Counter64 .1.3.6.1.4.1.2272.1.100.9.10.1.4 |
rc2kAtmPortStatsInHecCorrectedNumber of received cells in which HCS
was correctedro Counter32 .1.3.6.1.4.1.2272.1.100.9.10.1.5 |
rc2kAtmPortStatsInHecUncorrectedNumber of received cells dropped because HCS
couldn't be correctedro Counter32 .1.3.6.1.4.1.2272.1.100.9.10.1.6 |
rc2kAtmPortStatsInUnknownProtosNumber of received cells dropped with wrong VPI/VCIro Counter32 .1.3.6.1.4.1.2272.1.100.9.10.1.7 |
rc2kAtmPortStatsInPktsNumber of AAL5 CPCS PDUs receivedro Counter32 .1.3.6.1.4.1.2272.1.100.9.10.1.8 |
rc2kAtmPortStatsOutPktsNumber of AAL5 CPCS PDUs transmittedro Counter32 .1.3.6.1.4.1.2272.1.100.9.10.1.9 |
rc2kAtmPortStatsInDroppedPktsNumber of AAL5 CPCS PDUs dropped due to
resource exhaustionro Counter32 .1.3.6.1.4.1.2272.1.100.9.10.1.10 |
rc2kAtmPortStatsOutDroppedPktsNumber of AAL5 CPCS PDUs dropped because the
transmitter closed the channelro Counter32 .1.3.6.1.4.1.2272.1.100.9.10.1.11 |
rc2kAtmVPortStatsTableATM Elan statistics table SEQUENCE OF Rc2kAtmVPortStatsEntry .1.3.6.1.4.1.2272.1.100.9.11 |
rc2kAtmVPortStatsEntryEntry containing information of ATM Elan statistics Rc2kAtmVPortStatsEntry .1.3.6.1.4.1.2272.1.100.9.11.1 |
rc2kAtmVPortStatsIfIndexport numberro InterfaceIndex .1.3.6.1.4.1.2272.1.100.9.11.1.1 |
rc2kAtmVPortStatsVlanIdVlan Idro Integer32 .1.3.6.1.4.1.2272.1.100.9.11.1.2 |
rc2kAtmVPortStatsClearClear Elan Statsrw Enumeration .1.3.6.1.4.1.2272.1.100.9.11.1.3 |
rc2kAtmVPortStatsInOctetsAAL5 CPCS PDU octects received from ATM interfacero Counter64 .1.3.6.1.4.1.2272.1.100.9.11.1.4 |
rc2kAtmVPortStatsOutOctetsAAL5 CPCS PDU octects transmitted out of ATM interfacero Counter64 .1.3.6.1.4.1.2272.1.100.9.11.1.5 |
rc2kAtmVPortStatsInErrorsAAL5 CPCS PDUs received with errors from ATM interface.
These errors include CRC-32 errors,SAR time-out errors
And oversized SDU errorsro Counter32 .1.3.6.1.4.1.2272.1.100.9.11.1.6 |
rc2kAtmVPortStatsOutErrorsNumber of AAL5 CPCS PDUs that couldn't be transmitted
due to errorsro Counter32 .1.3.6.1.4.1.2272.1.100.9.11.1.7 |
rc2kAtmVPortStatsInDiscardsNumber of received AAL5 CPCS PDUs discardedro Counter32 .1.3.6.1.4.1.2272.1.100.9.11.1.8 |
rc2kAtmVPortStatsOutDiscardsNumber of AAL5 CPCS PDUs which are to be transmitted
but discardedro Counter32 .1.3.6.1.4.1.2272.1.100.9.11.1.9 |
rc2kAtmVPortStatsInUcastPktsReceived ethernet/IP/IPX packets whose destination
address is neither a multicast nor a broadcast
addressro Counter32 .1.3.6.1.4.1.2272.1.100.9.11.1.10 |
rc2kAtmVPortStatsOutUcastPktsForwarded ethernet/IP/IPX packets whose destination
address is neither a multicast nor a broadcast
addressro Counter32 .1.3.6.1.4.1.2272.1.100.9.11.1.11 |
rc2kAtmVPortStatsInMulticastPktsReceived ethernet/IP/IPX packets whose destination
MAC address(or IP address in case of IP ELAN type)
is multicast MAC address or class D IP address
(in case of IP ELAN type)ro Counter32 .1.3.6.1.4.1.2272.1.100.9.11.1.12 |
rc2kAtmVPortStatsOutMulticastPktsForwarded ethernet/IP/IPX packets whose destination
MAC address(or IP address in case of IP ELAN type)
is multicast MAC address or class D IP address
(in case of IP ELAN type)ro Counter32 .1.3.6.1.4.1.2272.1.100.9.11.1.13 |
rc2kAtmVPortStatsInBroadcastPktsReceived ethernet/IP/IPX packets whose destination
address in broadcast addressro Counter32 .1.3.6.1.4.1.2272.1.100.9.11.1.14 |
rc2kAtmVPortStatsOutBroadcastPktsForwarded ethernet/IP/IPX packets whose destination
address in broadcast addressro Counter32 .1.3.6.1.4.1.2272.1.100.9.11.1.15 |
rc2kCpuEthernetPortIpv6RouteTable2k CPU Ethernet Port Route table for Ipv6 SEQUENCE OF Rc2kCpuEthernetPortIpv6RouteEntry .1.3.6.1.4.1.2272.1.100.13 |
rc2kCpuEthernetPortIpv6RouteEntryEntry containing information of 2k CPU Ethernet Port Ipv6 Rc2kCpuEthernetPortIpv6RouteEntry .1.3.6.1.4.1.2272.1.100.13.1 |
rc2kCpuEthernetPortIpv6RouteNetworkUsed to configure the ipv6 network that can be
used to remotely manage this device. Ipv6Address (IPV6-TC) .1.3.6.1.4.1.2272.1.100.13.1.1 |
rc2kCpuEthernetPortIpv6RoutePrefixLengthThe length of the prefix (in bits). INTEGER .1.3.6.1.4.1.2272.1.100.13.1.2 |
rc2kCpuEthernetPortIpv6RouteGatewayUsed to configure the the IPv6 address of the
gateway that should be used to forward IPv6
traffic. Ipv6Address (IPV6-TC) .1.3.6.1.4.1.2272.1.100.13.1.3 |
rc2kCpuEthernetPortIpv6RouteRowStatusrow statusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.100.13.1.4 |
rc2kPowerConsumptionInfoTablePower consumption info table for all slots SEQUENCE OF Rc2kPowerConsumptionInfoEntry .1.3.6.1.4.1.2272.1.100.17 |
rc2kPowerConsumptionInfoEntryEntry containing power consumption information of
the slot Rc2kPowerConsumptionInfoEntry .1.3.6.1.4.1.2272.1.100.17.1 |
rc2kPowerConsumptionInfoIndexSlot number. Integer32 .1.3.6.1.4.1.2272.1.100.17.1.1 |
rc2kPowerConsumptionInfoPowerStatusPower operation status of this slotro Enumeration .1.3.6.1.4.1.2272.1.100.17.1.2 |
rc2kPowerConsumptionInfoBasePowerThe base power required for this slotro Integer32 .1.3.6.1.4.1.2272.1.100.17.1.3 |
rc2kPowerConsumptionInfoConsumedPowerThe actual consumed power of this slot.
Value will be set zero when Power status is 'off'
rc2kPowerConsumptionInfoPowerStatusro Integer32 .1.3.6.1.4.1.2272.1.100.17.1.4 |
rc2kPowerConsumptionInfoPowerPriorityUsed to indicate the priority of the slot for power
managementro Enumeration .1.3.6.1.4.1.2272.1.100.17.1.5 |
rc2kPowerConsumptionInfoSlotDescriptionUser to indicate the slot type information.
Such as, 'Slot1'..'Slot12', 'SF1'..'SF4'..etcro DisplayString .1.3.6.1.4.1.2272.1.100.17.1.6 |
rc2kPowerConsumptionInfoCardDescriptionHardware description of this cardro DisplayString .1.3.6.1.4.1.2272.1.100.17.1.7 |
rc2kTemperatureTableTable for retrieving the temperatures
of each card (CP, IO, SF) on the chassis SEQUENCE OF Rc2kTemperatureEntry .1.3.6.1.4.1.2272.1.100.18 |
rc2kTemperatureEntryContains information regarding the temperature of
each slot (CP, IO and SF) on the chassis Rc2kTemperatureEntry .1.3.6.1.4.1.2272.1.100.18.1 |
rc2kTemperatureSlotIndexSlot number of either a CP (1,2) or IO (3-12)
or SF (21-26). Integer32 (1..12 | 21..26) .1.3.6.1.4.1.2272.1.100.18.1.1 |
rc2kTemperatureSlotDescriptionUsed to indicate the slot type information.
Such as, 'Slot1'..'Slot12', 'SF1'..'SF4'..etc.ro DisplayString .1.3.6.1.4.1.2272.1.100.18.1.2 |
rc2kTemperatureZone1TemperatureZone 1 temperature measured in celsius degreero Gauge32 .1.3.6.1.4.1.2272.1.100.18.1.3 |
rc2kTemperatureZone2TemperatureZone 2 temperature measured in celsius degree.
A value of 0 for this mib object indicates that
Zone 2 is not available on this slot.ro Gauge32 .1.3.6.1.4.1.2272.1.100.18.1.4 |
rc2kTemperatureZone3TemperatureZone 3 temperature measured in celsius degree.
A value of 0 for this mib object indicates that
Zone 3 is not available on this slot.ro Gauge32 .1.3.6.1.4.1.2272.1.100.18.1.5 |
rc2kTemperatureZone4TemperatureZone 4 temperature measured in celsius degreero Gauge32 .1.3.6.1.4.1.2272.1.100.18.1.6 |
rc2kTemperatureZone5TemperatureZone 5 2 temperature measured in celsius degree.
A value of 0 for this mib object indicates that
Zone 5 is not available on this slot.ro Gauge32 .1.3.6.1.4.1.2272.1.100.18.1.7 |
rc2kTemperatureHighTemperatureHighest temperature measured in celsius degreero Gauge32 .1.3.6.1.4.1.2272.1.100.18.1.8 |
rc2kTemperatureLowTemperatureLowest temperature measured in celsius degreero Gauge32 .1.3.6.1.4.1.2272.1.100.18.1.9 |
rc2kTemperatureAlarmThresholdWhen the card temperature crosses this
threshold, an alarm will be set.ro Gauge32 .1.3.6.1.4.1.2272.1.100.18.1.10 |
rc2kTemperatureShutdownThresholdWhen the card temperature crosses this
threshold, the card will be shutdown.ro Gauge32 .1.3.6.1.4.1.2272.1.100.18.1.11 |
rcPowerRanger OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.202 |
rcPowerRangerMib OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.202.1 |
rcPowerRangerNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.202.1.0 |
rcPowerRangerObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.202.1.1 |
rcPrQos OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.202.1.1.1 |
rcPrQosScalars OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.202.1.1.1.1 |
rcPrQosPolicyNumPoliciesA list of Global Policer (GPID) entries.
The number of entries is given by
rcPrQosPolicyNumPolicies.ro INTEGER .1.3.6.1.4.1.2272.1.202.1.1.1.1.1 |
rcPrQosTxQueueNumTemplatesThe number of egress queue templates currently
defined in the switch.ro INTEGER .1.3.6.1.4.1.2272.1.202.1.1.1.1.2 |
rcPrQosFlowPolicerStatsClearClear all box-wide policer statistics.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.202.1.1.1.1.3 |
rcPrQosLossless8021pThe value used to map Ingress IEEE 1p to lossless
internal Qos when lossless Ethernet mode is enabled.rw Integer32 .1.3.6.1.4.1.2272.1.202.1.1.1.1.4 |
rcPrQosLosslessPfcEnabledIf true then at least one lossless port in the
switch has been configured with the value of
rcPortLosslessEnetPauseType set to pfc(2).
If false then either all lossless ports are currently
in fc(1) mode, or no ports are configured in
lossless mode.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.202.1.1.1.1.5 |
rcPrQosLosslessPortsEnablePendingThis object is used to inform the system which ports
are pending lossless enable and is for internal use.rw PortSet .1.3.6.1.4.1.2272.1.202.1.1.1.1.6 |
rcPrQosLosslessPortsOperPendingIndicates which ports which would be brought down
operationally if the set of ports indicated in
rcPrQosLosslessPortsEnablePending are configured
for lossless operation.ro DisplayString .1.3.6.1.4.1.2272.1.202.1.1.1.1.7 |
rcPrQosPolicyTableA list of GPID entries. The number of entries is
given by rcPrQosPolicyNumPolicies. SEQUENCE OF RcPrQosPolicyEntry .1.3.6.1.4.1.2272.1.202.1.1.1.2 |
rcPrQosPolicyEntryEntry containing configuration information for a
particular global policer. RcPrQosPolicyEntry .1.3.6.1.4.1.2272.1.202.1.1.1.2.1 |
rcPrQosPolicyGpIdA value that uniquely identifies Global Policer
associated with this entry.ro INTEGER .1.3.6.1.4.1.2272.1.202.1.1.1.2.1.1 |
rcPrQosPolicyNameAn administratively-assigned name for this Global
Policer.rw DisplayString .1.3.6.1.4.1.2272.1.202.1.1.1.2.1.2 |
rcPrQosPolicyPeakRateGlobal Policer Peak Rate in Kilobit/sec.rw INTEGER .1.3.6.1.4.1.2272.1.202.1.1.1.2.1.3 |
rcPrQosPolicySvcRateGlobal Policer Service Rate in Kilobit/sec.rw INTEGER .1.3.6.1.4.1.2272.1.202.1.1.1.2.1.4 |
rcPrQosPolicyLaneMembersThe set of lanes that are members of this Global
Policer. The string is 4 octets long, for a total
of 32 bits. Each bit corresponds to a laneId.
Each I/O slot has 4 laneIds. When a bit has the
value one(1), the corresponding laneId is a member
of the set. When a bit has the value zero(0), the
corresponding laneId is not a member of the set.
The encoding is such that the most significant bit
of octet #1 corresponds to laneId 0, while the
least significant bit of octet #4 corresponds to
laneId 31.rw LaneSet .1.3.6.1.4.1.2272.1.202.1.1.1.2.1.5 |
rcPrQosPolicyRowStatusCreate/delete operations for this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.202.1.1.1.2.1.6 |
rcPrQosLocalPolicyTableA list of policer entries. SEQUENCE OF RcPrQosLocalPolicyEntry .1.3.6.1.4.1.2272.1.202.1.1.1.3 |
rcPrQosLocalPolicyEntryAn entry containing configuration information for
a particular local policer. This field will
return 0 for CB as tap.lane.lpid is not used. RcPrQosLocalPolicyEntry .1.3.6.1.4.1.2272.1.202.1.1.1.3.1 |
rcPrQosLocalPolicyGpIdA value of Global Policer ID corresponding to this
local policer.ro INTEGER .1.3.6.1.4.1.2272.1.202.1.1.1.3.1.1 |
rcPrQosLocalPolicyIndexThe slot number of the VSP chassis on which
stats are collected. Valid slots are IO slots
which are in slots 3 to 12.ro Integer32 .1.3.6.1.4.1.2272.1.202.1.1.1.3.1.2 |
rcPrQosLocalPolicyPeakRateGlobal Peak Rate in Kilobit/sec.ro INTEGER .1.3.6.1.4.1.2272.1.202.1.1.1.3.1.3 |
rcPrQosLocalPolicySvcRateGlobal Policer Service Rate in Kilobit/sec.ro INTEGER .1.3.6.1.4.1.2272.1.202.1.1.1.3.1.4 |
rcPrQosLocalPolicyTotalPktsGlobal Policer Total Packets Count.ro Counter64 .1.3.6.1.4.1.2272.1.202.1.1.1.3.1.5 |
rcPrQosLocalPolicyTotalBytesGlobal Policer Total Bytes Count.ro Counter64 .1.3.6.1.4.1.2272.1.202.1.1.1.3.1.6 |
rcPrQosLocalPolicyBytesOverPeakGlobal Policer Bytes over Peak Rate Count.ro Counter64 .1.3.6.1.4.1.2272.1.202.1.1.1.3.1.7 |
rcPrQosLocalPolicyBytesOverSvcGlobal Policer Bytes over Service Rate Count.ro Counter64 .1.3.6.1.4.1.2272.1.202.1.1.1.3.1.8 |
rcPrQosLocalPolicyTotalPktsDroppedThe count of Global Policer Total Packets dropped
due to reasons other than policing, e.g. congestion.ro Counter64 .1.3.6.1.4.1.2272.1.202.1.1.1.3.1.9 |
rcPrQosLocalPolicyLaneMemberThe lane that this Gpid has a local policing
account onro OCTET STRING .1.3.6.1.4.1.2272.1.202.1.1.1.3.1.10 |
rcPrQosLocalPolicyGreenPacketsThe total number of packets received
that were below committed rate.ro Counter64 .1.3.6.1.4.1.2272.1.202.1.1.1.3.1.11 |
rcPrQosLocalPolicyGreenBytesThe total number of bytes received
that were below the committed rate.ro Counter64 .1.3.6.1.4.1.2272.1.202.1.1.1.3.1.12 |
rcPrQosLocalPolicyYellowPacketsThe total number of packets received
that were above the committed rate but
below the peak rate.ro Counter64 .1.3.6.1.4.1.2272.1.202.1.1.1.3.1.13 |
rcPrQosLocalPolicyYellowBytesThe total number of bytes received
that were above the committed rate but
below the peak rate.ro Counter64 .1.3.6.1.4.1.2272.1.202.1.1.1.3.1.14 |
rcPrQosLocalPolicyRedPacketsThe total number of packets received
that were above the peak rate.ro Counter64 .1.3.6.1.4.1.2272.1.202.1.1.1.3.1.15 |
rcPrQosLocalPolicyRedBytesThe total number of bytes received
that were above the peak rate.ro Counter64 .1.3.6.1.4.1.2272.1.202.1.1.1.3.1.16 |
rcPrQosLocalPolicyStatsClearClear Qos Policy statistics.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.202.1.1.1.3.1.17 |
rcPrQosTxQueueTemplateTableA list of egress queue templates. The number of
templates is given by rcPrQosTxQueueNumTemplates. SEQUENCE OF RcPrQosTxQueueTemplateEntry .1.3.6.1.4.1.2272.1.202.1.1.1.4 |
rcPrQosTxQueueTemplateEntryEntry containing configuration information for a
particular egress queue template. Queue is a set of
egress queues. RcPrQosTxQueueTemplateEntry .1.3.6.1.4.1.2272.1.202.1.1.1.4.1 |
rcPrQosTxQueueTemplateIdA value that uniquely identifies Egress Queue
Template.ro INTEGER .1.3.6.1.4.1.2272.1.202.1.1.1.4.1.1 |
rcPrQosTxQueueTemplateNameAn administratively-assigned name for this egress
Queue Template.rw DisplayString .1.3.6.1.4.1.2272.1.202.1.1.1.4.1.2 |
rcPrQosTxQueueTemplateMaxQueuesMaximum number of queues in this Template.rw Enumeration .1.3.6.1.4.1.2272.1.202.1.1.1.4.1.3 |
rcPrQosTxQueueTemplateBalancedQueuesTotal number of Balanced Queues in this Template.rw INTEGER .1.3.6.1.4.1.2272.1.202.1.1.1.4.1.4 |
rcPrQosTxQueueTemplateHiPriQueuesTotal number of High Priority Queues in this
Template.rw INTEGER .1.3.6.1.4.1.2272.1.202.1.1.1.4.1.5 |
rcPrQosTxQueueTemplateLoPriQueuesTotal number of Low Priority Queues in this Template.rw INTEGER .1.3.6.1.4.1.2272.1.202.1.1.1.4.1.6 |
rcPrQosTxQueueTemplateTotalQueuesTotal number of queues in this Template.ro Integer32 .1.3.6.1.4.1.2272.1.202.1.1.1.4.1.7 |
rcPrQosTxQueueTemplateBalancedQListList of Balanced Queues in this Template.ro OCTET STRING .1.3.6.1.4.1.2272.1.202.1.1.1.4.1.8 |
rcPrQosTxQueueTemplateHiPriQListList of High Priority Queues in this Template.ro OCTET STRING .1.3.6.1.4.1.2272.1.202.1.1.1.4.1.9 |
rcPrQosTxQueueTemplateLoPriQListList of Low Priority Queues in this Template.ro OCTET STRING .1.3.6.1.4.1.2272.1.202.1.1.1.4.1.10 |
rcPrQosTxQueueTemplateTotalQListsList of Total Physical Queues in this Template.ro OCTET STRING .1.3.6.1.4.1.2272.1.202.1.1.1.4.1.11 |
rcPrQosTxQueueTemplateMinRateTotalSum of minimum rate guarantees for this template.ro INTEGER .1.3.6.1.4.1.2272.1.202.1.1.1.4.1.12 |
rcPrQosTxQueueTemplateMaxRateHiPriSum of maximum rate guarantees for high priority
queues of this template.ro INTEGER .1.3.6.1.4.1.2272.1.202.1.1.1.4.1.13 |
rcPrQosTxQueueTemplatePortMembersPort members of this template.rw PortSet .1.3.6.1.4.1.2272.1.202.1.1.1.4.1.14 |
rcPrQosTxQueueTemplateFlagsBitset indicated template state.rw Enumeration .1.3.6.1.4.1.2272.1.202.1.1.1.4.1.15 |
rcPrQosTxQueueTemplateApplyWhen apply is issued by the administrator,
the Egress Queue Set attributes are committed.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.202.1.1.1.4.1.16 |
rcPrQosTxQueueTemplateRowStatusCreate/delete operations for this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.202.1.1.1.4.1.17 |
rcPrQosTxQueueTableA list of elementary Egress queue entries. SEQUENCE OF RcPrQosTxQueueEntry .1.3.6.1.4.1.2272.1.202.1.1.1.5 |
rcPrQosTxQueueEntryEntry containing configuration information for a
particular elementary egress queue. RcPrQosTxQueueEntry .1.3.6.1.4.1.2272.1.202.1.1.1.5.1 |
rcPrQosTxQueueTidTemplate ID of the template this queue belongs to.rw INTEGER .1.3.6.1.4.1.2272.1.202.1.1.1.5.1.1 |
rcPrQosTxQueueQidQueue Offset from the base queue for this port.ro INTEGER .1.3.6.1.4.1.2272.1.202.1.1.1.5.1.2 |
rcPrQosTxQueueNameAn NNSC name for this egress queue. Allowed only
for 8 NNSC queues.rw DisplayString .1.3.6.1.4.1.2272.1.202.1.1.1.5.1.3 |
rcPrQosTxQueueStyleEgress queue style.rw Enumeration .1.3.6.1.4.1.2272.1.202.1.1.1.5.1.4 |
rcPrQosTxQueueWeightEgress queue weight.
Applicable for balanced queues and lo-pri queues only.ro Integer32 .1.3.6.1.4.1.2272.1.202.1.1.1.5.1.5 |
rcPrQosTxQueueMaxRateEgress queue maximum rate, Kbsrw Integer32 .1.3.6.1.4.1.2272.1.202.1.1.1.5.1.6 |
rcPrQosTxQueueMinRateEgress queue minimun rate guarantee, Kbs.
Applicable for balanced queues and lo-pri queues only.rw Integer32 .1.3.6.1.4.1.2272.1.202.1.1.1.5.1.7 |
rcPrQosTxQueueBquantumBandwidth allocation unit.
Applicable for balanced queues and lo-pri queues only.ro Integer32 .1.3.6.1.4.1.2272.1.202.1.1.1.5.1.8 |
rcPrQosTxQueueMaxLengthMaximum queue length.rw Integer32 .1.3.6.1.4.1.2272.1.202.1.1.1.5.1.9 |
rcPrQosTxQueueWredCurveSetRandom Early Detection Number.rw Enumeration .1.3.6.1.4.1.2272.1.202.1.1.1.5.1.10 |
rcPrQosTxQueueRowStatusCreate/delete operations for this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.202.1.1.1.5.1.11 |
rcPrQosTxQueueStatsTableA list of elementary Egress queue stats entries. SEQUENCE OF RcPrQosTxQueueStatsEntry .1.3.6.1.4.1.2272.1.202.1.1.1.6 |
rcPrQosTxQueueStatsEntryEntry containing statistics information for a
particular elementary egress queue. RcPrQosTxQueueStatsEntry .1.3.6.1.4.1.2272.1.202.1.1.1.6.1 |
rcPrQosTxQueueStatsPortPort index of the stats table.ro InterfaceIndex .1.3.6.1.4.1.2272.1.202.1.1.1.6.1.1 |
rcPrQosTxQueueStatsQidQueue Offset from the base queue for this port.ro INTEGER .1.3.6.1.4.1.2272.1.202.1.1.1.6.1.2 |
rcPrQosTxQueueStatsTotalPagesTotal pages offered to the queue.ro Counter64 .1.3.6.1.4.1.2272.1.202.1.1.1.6.1.3 |
rcPrQosTxQueueStatsDroppedPagesTotal pages dropped by the queue.ro Counter64 .1.3.6.1.4.1.2272.1.202.1.1.1.6.1.4 |
rcPrQosTxQueueStatsUtilizationUtilization percentage of the queue.ro INTEGER .1.3.6.1.4.1.2272.1.202.1.1.1.6.1.5 |
rcPrQosIngressExpToQosTableThis table is used to specify the Mpls EXP to
QOS (Exp bit->QOS) mapping on packet ingress. SEQUENCE OF RcPrQosIngressExpToQosEntry .1.3.6.1.4.1.2272.1.202.1.1.1.7 |
rcPrQosIngressExpToQosEntryEntry containing information of Exp bit->Qos mapping RcPrQosIngressExpToQosEntry .1.3.6.1.4.1.2272.1.202.1.1.1.7.1 |
rcPrQosIngressExpToQosIndexUsed to uniquely identify a row in this table. INTEGER .1.3.6.1.4.1.2272.1.202.1.1.1.7.1.1 |
rcPrQosIngressExpToQosRowStatusCreate/delete operations for this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.202.1.1.1.7.1.4 |
rcPrQosEgressQosToExpTableThis table is used to specify the QOS to
Mpls EXP bit field (QOS->Exp bit) mapping on packet
egress. SEQUENCE OF RcPrQosEgressQosToExpEntry .1.3.6.1.4.1.2272.1.202.1.1.1.8 |
rcPrQosEgressQosToExpEntryEntry containing information of Qos->Exp bit mapping RcPrQosEgressQosToExpEntry .1.3.6.1.4.1.2272.1.202.1.1.1.8.1 |
rcPrQosEgressQosToExpIndexUsed to uniquely identify a row in this table. INTEGER .1.3.6.1.4.1.2272.1.202.1.1.1.8.1.1 |
rcPrQosEgressQosToExpRowStatusCreate/delete operations for this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.202.1.1.1.8.1.4 |
rcPrFilter OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.202.1.1.2 |
rcPrFilterScalars OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.202.1.1.2.1 |
rcPrFilterAclTableSizeUsed to indicate the number of Acl entries
in the rcPrFilterAclTable. Default table size is 0
until the administrator configures any Acl entries.ro INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.1.2 |
rcPrFilterAceTableSizeUsed to indicate the number of Ace entries in the
rcPrFilterAceTable. Default table size is 0 until the
administrator configures any Ace entries. The maximum
size is # of Acls multiplied by # of Aces.ro INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.1.3 |
rcPrFilterAclBufferWrapUsed to enable or disable buffer wrapping for
filters log.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.202.1.1.2.1.4 |
rcPrFilterAclClearLogUsed to clear the filter Logs collected.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.202.1.1.2.1.5 |
rcPrFilterAct OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.202.1.1.2.2 |
rcPrFilterActTableA table of Acts to store information of each Act
entry. This table is indexed by the Act Id. SEQUENCE OF RcPrFilterActEntry .1.3.6.1.4.1.2272.1.202.1.1.2.2.1 |
rcPrFilterActEntryOne Act Entry holding Act information. RcPrFilterActEntry .1.3.6.1.4.1.2272.1.202.1.1.2.2.1.1 |
rcPrFilterActIdA table of Acts to store information of each
Act. This table is indexed by the Act Id.ro INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.2.1.1.1 |
rcPrFilterActNameA descriptive name chosen by the administrator
for the Act Entry.rw DisplayString .1.3.6.1.4.1.2272.1.202.1.1.2.2.1.1.2 |
rcPrFilterActArpAttrsValue is one or multiple (logical 'OR' of the
following):
none(0),
operation(1)
none: No Arp Attrs are selected or to clear
other choices.
operation: Only valid option for Arp attributes.rw INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.2.1.1.3 |
rcPrFilterActEthernetAttrsValue is one or multiple of the following:
none(0),
srcMac(1),
dstMac(2),
etherType(4),
port(8),
vlan(16),
vlanTagPrio(32)
none: If selected then unselect all other selections.rw INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.2.1.1.4 |
rcPrFilterActIpAttrsValue is one or multiple of the following:
none(0),
srcIp(1),
dstIp(2),
ipFragFlag(4),
ipOptions(8),
ipProtoType(16),
dscp(32)
none: If selected then unselect all other selections.rw INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.2.1.1.5 |
rcPrFilterActProtocolAttrsValue is one or multiple of the following:
none(0),
tcpSrcPort(1),
udpSrcPort(2),
tcpDstPort(4),
udpDstPort(8),
tcpFlags(16),
icmpMsgType(32)
none: If selected then unselect all other selections.rw INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.2.1.1.6 |
rcPrFilterActApplyWhen apply is issued by the administrator,
the ACT attributes cannot be modified.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.202.1.1.2.2.1.1.7 |
rcPrFilterActRowStatusCreate/delete operations for this entry. The
entry cannot be modified or deleted while there
are Acls configured with this Act entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.202.1.1.2.2.1.1.8 |
rcPrFilterActIpv6AttrsValue is one or multiple of the following:
none(0),
srcIpv6(1),
dstIpv6(4),
nextHdr(16),
none: If selected then unselect all other selections.rw INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.2.1.1.9 |
rcPrFilterActPatternTableA table of user-defined parameters of Acls to
store information of each Acl. This table is indexed
by the Act Id and PatternIndex. SEQUENCE OF RcPrFilterActPatternEntry .1.3.6.1.4.1.2272.1.202.1.1.2.2.2 |
rcPrFilterActPatternEntryEntry containing Configuration information for a
particular Act. RcPrFilterActPatternEntry .1.3.6.1.4.1.2272.1.202.1.1.2.2.2.1 |
rcPrFilterActPatternActIdAn index to the ActPatternEntry, a unique
identifier for Act entry in the range of Table
Size.ro INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.2.2.1.1 |
rcPrFilterActPatternIndexIndexes each user defined field pattern in an
Acl entry. In this release only 3 patterns are
allowed per ACT but we can have multiple
patterns per ACL.ro INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.2.2.1.2 |
rcPrFilterActPatternNameA descriptive name chosen by the administrator for
the Acl Pattern Entry.rw DisplayString .1.3.6.1.4.1.2272.1.202.1.1.2.2.2.1.3 |
rcPrFilterActPatternBaseUser defined fields from headers to be used in
the Aces of the Acl.rw Enumeration .1.3.6.1.4.1.2272.1.202.1.1.2.2.2.1.4 |
rcPrFilterActPatternOffsetSet Offset in bytes to the beginning offset of the user
defined field with selected header option as base.rw INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.2.2.1.5 |
rcPrFilterActPatternLengthThe number of bytes to extract beginning from the
offset is set in rcPrFilterActPatternLength.
Only 1-15 are valid.rw INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.2.2.1.6 |
rcPrFilterActPatternRowStatusCreate/delete operations for this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.202.1.1.2.2.2.1.7 |
rcPrFilterAcl OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.202.1.1.2.3 |
rcPrFilterAclTableA table of Acls to store information of each Acl.
This table is indexed by the Acl Id. SEQUENCE OF RcPrFilterAclEntry .1.3.6.1.4.1.2272.1.202.1.1.2.3.1 |
rcPrFilterAclEntryEntry containing Configuration information for
a particular Acl. RcPrFilterAclEntry .1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1 |
rcPrFilterAclIdA unique identifier for Acl entry in the range
of Table Size.ro INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.1 |
rcPrFilterAclNameA descriptive name chosen by the administrator for
the Acl Entry.rw DisplayString .1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.3 |
rcPrFilterAclTypeAn Acl can be vlan-based or port-based. An Ace
has a capability to match packets classified as
'ingress' and 'egress'. An ingress packet is
assigned a value 'in' and an egress packet is
assigned a value 'out'.rw Enumeration .1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.4 |
rcPrFilterAclAceListSizeIndicates the number of Aces in a particular Acl.ro INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.5 |
rcPrFilterAclDefaultActionIndicates action to be taken when none of the
Aces in the Acl match.rw Enumeration .1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.6 |
rcPrFilterAclStateEnables/Disables the state of all Aces in the Aclrw EnableValue .1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.8 |
rcPrFilterAclVlanListAn array used to indicate all the VLANs to be
associated with this Acl Entry. At present, only 4k
Vlans are supported.rw IdList .1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.9 |
rcPrFilterAclPortListIndicates the ports to be added to this Acl Entry.rw PortSet .1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.10 |
rcPrFilterAclRowStatusCreate/delete operations for the entry. Deleting
a non-empty Acl results in deletion of member Aces
and then the Acl.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.11 |
rcPrFilterAclNumVlanIdsUsed to Indicate the number of VLAN ID's that
are stored in the rcPrFilterAclVlanList.ro INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.12 |
rcPrFilterAclPktTypeIndicates the packet type that thsi ACL is
applicable to.rw Enumeration .1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.13 |
rcPrFilterAclControlPktRuleWhen the rcPrFilterAclDefaultAction object is set
to deny then control packets follow this rule.
Otherwise, the object value can be ignored.rw Enumeration .1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.14 |
rcPrFilterAclVlanIdDestination Vlan Id for mirroring the packets.
The value 0 means no vlan is being mirrored.
When the value of rcPrFilterAclVlanId is non-zero,
the values of rcPrFilterAclMltId and
rcPrFilterAclDstPortList must be 0.rw Integer32 .1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.15 |
rcPrFilterAclMltIdDestination Mlt Id for mirroring the packets.
The value 0 means no mlt is being mirrored.
When the value of rcPrFilterAclMltId is non-zero,
the values of rcPrFilterAclVlanId and
rcPrFilterAclDstPortList must be 0.rw Integer32 .1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.16 |
rcPrFilterAclDstPortListDestination Port List for mirroring the packets.
The value 0 means no port(s) is being mirrored.
When the value of rcPrFilterAclDstPortList is non-zero,
the values of rcPrFilterAclVlanId and
rcPrFilterAclMltId must be 0.rw PortSet .1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.17 |
rcPrFilterAclIpfixStateValue indicating whether ipfix option on the
Acl is enabled.rw EnableValue .1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.18 |
rcPrFilterAclStatsTableA table of Acls Statistics entries to store the
Default Acl statistics for each Acl.
This table is indexed by the Acl Id. SEQUENCE OF RcPrFilterAclStatsEntry .1.3.6.1.4.1.2272.1.202.1.1.2.3.2 |
rcPrFilterAclStatsEntryEntry containing default statistics information for
a particular Acl. RcPrFilterAclStatsEntry .1.3.6.1.4.1.2272.1.202.1.1.2.3.2.1 |
rcPrFilterAclStatsAclIdA unique identifier for Acl entry in the range
of Table Size.ro INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.3.2.1.1 |
rcPrFilterAclStatsClearClear default statistics for ACL Filters.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.202.1.1.2.3.2.1.4 |
rcPrFilterAclStatsMatchDefaultSecurityPktsSecurity packet count of traffic not matching any of the
ACE rules or hits on Default Action where the count bit
is turned on in ACL Global Action.ro Counter64 .1.3.6.1.4.1.2272.1.202.1.1.2.3.2.1.5 |
rcPrFilterAclStatsMatchDefaultSecurityOctetsSecurity octet count of traffic not matching any of the
ACE rules or hits on Default Action where the count bit
is turned on in ACL Global Action.ro Counter64 .1.3.6.1.4.1.2272.1.202.1.1.2.3.2.1.6 |
rcPrFilterAclStatsMatchDefaultQosPktsQOS packet count of traffic not matching any of the
ACE rules or hits on Default Action where the count bit
is turned on in ACL Global Action.ro Counter64 .1.3.6.1.4.1.2272.1.202.1.1.2.3.2.1.7 |
rcPrFilterAclStatsMatchDefaultQosOctetsQOS octet count of traffic not matching any of the
ACE rules or hits on Default Action where the count bit
is turned on in ACL Global Action.ro Counter64 .1.3.6.1.4.1.2272.1.202.1.1.2.3.2.1.8 |
rcPrFilterAclStatsMatchGlobalSecurityPktsSecurity packet count of traffic matching any of the
ACE rules or hits on Default Action where the count bit
is turned on in ACL Global Action.ro Counter64 .1.3.6.1.4.1.2272.1.202.1.1.2.3.2.1.9 |
rcPrFilterAclStatsMatchGlobalSecurityOctetsSecurity octet count of traffic matching any of the
ACE rules or hits on Default Action where the count bit
is turned on in ACL Global Action.ro Counter64 .1.3.6.1.4.1.2272.1.202.1.1.2.3.2.1.10 |
rcPrFilterAclStatsMatchGlobalQosPktsQOS packet count of traffic matching any of the
ACE rules or hits on Default Action where the count bit
is turned on in ACL Global Action.ro Counter64 .1.3.6.1.4.1.2272.1.202.1.1.2.3.2.1.11 |
rcPrFilterAclStatsMatchGlobalQosOctetsQOS octet count of traffic matching any of the
ACE rules or hits on Default Action where the count bit
is turned on in ACL Global Action.ro Counter64 .1.3.6.1.4.1.2272.1.202.1.1.2.3.2.1.12 |
rcPrFilterAce OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.202.1.1.2.4 |
rcPrFilterAceTableA table of Aces to store information of each Ace
in context of its parent Acl. This is indexed by
AclId and AceId. SEQUENCE OF RcPrFilterAceEntry .1.3.6.1.4.1.2272.1.202.1.1.2.4.1 |
rcPrFilterAceEntryOne Ace entry holding Ace information. Ace is a
member of one Acl. RcPrFilterAceEntry .1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1 |
rcPrFilterAceAclIdAn index to the AceEntry, a unique
identifier for Acl entry in the range of Table
Size.ro INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.1 |
rcPrFilterAceIdAceId uniquely identifies one Ace entry.ro INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.2 |
rcPrFilterAceNameA descriptive name chosen by the administrator.
System automatically assigns a name if the user
has not assigned one.rw DisplayString .1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.3 |
rcPrFilterAceModeOperating Mode associated with the Ace is effective
on the packets matching this Ace.rw Enumeration .1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.4 |
rcPrFilterAceRemarkDscpThe 6-bit DSCP field from the ToS byte in Ipv4 header
encodes the PHB information per DiffServ standards
(Refer to DiffServ RFCs 2474). Set the Dscp to PHB
(like EF) or PHB-class(like AF1 which includes AF11,
AF12,AF13) to mark specific diffserv class traffic.
Set the field value to desired integer dscp code for
rcPrFilterAceRemarkDscp field to mark non-standard
traffic classes and local use PHBs.rw Enumeration .1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.5 |
rcPrFilterAceRemarkDot1PriorityDot1 Priority as described by Layer 2 standards,
802.1Q, 802.1P.rw Enumeration .1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.6 |
rcPrFilterAceRedirectNextHopRedirect matching IP traffic to the next hop.rw IpAddress .1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.7 |
rcPrFilterAceRedirectUnreachSet the desired behavior for redirected traffic in
case the specified next-hop is not reachable.rw Enumeration .1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.8 |
rcPrFilterAcePolicePolicing profile Identifier. Set the desired policing
profile identifier. Set the value to 0 when policing
is not desired.rw INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.9 |
rcPrFilterAceAdminStateValue indicating whether the Ace is enabled.
An Ace can only be modified if it is disabled.rw EnableValue .1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.10 |
rcPrFilterAceOperStateThe current operational state of the Ace.ro Enumeration .1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.11 |
rcPrFilterAceMltIndexIf this action is specified, it will
basically override the mlt-index picked
by the mlt algorithm, when a packet is
being sent out on MLT ports.rw INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.18 |
rcPrFilterAceRowStatusCreate/delete operations for this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.19 |
rcPrFilterAceIpfixStateValue indicating whether ipfix option on the
Ace is enabled.rw EnableValue .1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.20 |
rcPrFilterAceRedirectNextHopIpv6Redirect matching IPv6 traffic to the next hop.rw Ipv6Address (IPV6-TC) .1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.21 |
rcPrFilterAceDstPortListDestination Port List for mirroring the packets.rw PortSet .1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.22 |
rcPrFilterAceDstVlanIdDestination Vlan to mirror the packets.rw Integer32 .1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.23 |
rcPrFilterAceDstMltIdDestination Mlt to mirror the packets.rw Integer32 .1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.24 |
rcPrFilterAceInternalQosInternal QOS Level assigned to the packet flow DefVal = 8 is disablerw Integer32 .1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.25 |
rcPrFilterAceCountValue indicating whether Count option on the
Ace is enabled.rw EnableValue .1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.26 |
rcPrFilterAceLogValue indicating whether log option on the
Ace is enabled.rw EnableValue .1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.27 |
rcPrFilterAceCopytoPcapValue indicating whether copy to pcap option
on the Ace is enabled.rw EnableValue .1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.28 |
rcPrFilterAceDstIpDestination IP address to mirror the packets.rw IpAddress .1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.29 |
rcPrFilterAceDstIpTtlTtl value for the mirrored packet when mirror
destination is IP. If other than default,
the encapsulated packet will have the given ttl.rw Integer32 .1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.30 |
rcPrFilterAceDstIpDscpDscp value for the mirrored packet when mirror
destination is IP. The 6-bit DSCP field from the
ToS byte in Ipv4 header encodes the PHB information
per DiffServ standards (Refer to DiffServ RFCs 2474).
Set the Dscp to PHB (like EF) or PHB-class(like AF1 which
includes AF11, AF12,AF13) to mark specific diffserv class traffic.
Set the field value to desired integer dscp code for
rcPrFilterAceIpDscp field to mark non-standard
traffic classes and local use PHBs.rw Enumeration .1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.31 |
rcPrFilterAceEthSrcAddrTableA table of Aces to store Ethernet Source MAC
Address Header information of each Ace in context
of its parent Acl. SEQUENCE OF RcPrFilterAceEthSrcAddrEntry .1.3.6.1.4.1.2272.1.202.1.1.2.4.2 |
rcPrFilterAceEthSrcAddrEntryOne Ace entry holding Ace Ethernet Source MAC Address
information. An Ace is a member of one Acl. RcPrFilterAceEthSrcAddrEntry .1.3.6.1.4.1.2272.1.202.1.1.2.4.2.1 |
rcPrFilterAceEthSrcAddrAclIdAn index to the AceEthernetEntry, a unique
identifier for Acl entry in the range of Table
Size.ro INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.4.2.1.1 |
rcPrFilterAceEthSrcAddrAceIdAn index to the AceEthernetEntry, a unique
identifier for Acl entry in the range of Table
Size.ro INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.4.2.1.2 |
rcPrFilterAceEthSrcAddrListThe list of ethernet source address to match.rw OCTET STRING .1.3.6.1.4.1.2272.1.202.1.1.2.4.2.1.3 |
rcPrFilterAceEthSrcAddrListCountCount to store the number of discrete ranges
entered for the ethernet src address.rw INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.4.2.1.4 |
rcPrFilterAceEthSrcAddrOperOperators for Ace Ethernet Source MAC Address.rw Enumeration .1.3.6.1.4.1.2272.1.202.1.1.2.4.2.1.5 |
rcPrFilterAceEthSrcAddrRowStatusCreate/delete operations for this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.202.1.1.2.4.2.1.6 |
rcPrFilterAceEthSrcAddrOperMaskThe Mac Address mask value in hex which can
be set for the rcPrFilterAceEthSrcAddrOper when
the option selected is mask. It will be empty or
set to 000000000000 whenrcPrFilterAceEthSrcAddrOper
is set to 'eq'. In case of the prefix '0x' is
specified, 14 charaters is max lengthrw DisplayString .1.3.6.1.4.1.2272.1.202.1.1.2.4.2.1.7 |
rcPrFilterAceEthDstAddrTableA table of Aces to store Ethernet Destination MAC
Address Header information of each Ace in context
of its parent Acl. SEQUENCE OF RcPrFilterAceEthDstAddrEntry .1.3.6.1.4.1.2272.1.202.1.1.2.4.3 |
rcPrFilterAceEthDstAddrEntryOne Ace entry holding Ace Ethernet Destination
MAC Address information. An Ace is a member of one
Acl. RcPrFilterAceEthDstAddrEntry .1.3.6.1.4.1.2272.1.202.1.1.2.4.3.1 |
rcPrFilterAceEthDstAddrAclIdAn index to the AceEthDstAddrEntry, a unique
identifier for Acl entry in the range of Table
Size.ro INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.4.3.1.1 |
rcPrFilterAceEthDstAddrAceIdAn index to the AceEthDstAddrEntry, a unique
identifier for Acl entry in the range of Table
Size.ro INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.4.3.1.2 |
rcPrFilterAceEthDstAddrListList of ethernet destination address to
match.rw OCTET STRING .1.3.6.1.4.1.2272.1.202.1.1.2.4.3.1.3 |
rcPrFilterAceEthDstAddrListCountCount to store the number of discrete ranges
entered for the ethernet dst address.rw INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.4.3.1.4 |
rcPrFilterAceEthDstAddrOperOperators for Ace Ethernet Destination MAC Address.rw Enumeration .1.3.6.1.4.1.2272.1.202.1.1.2.4.3.1.5 |
rcPrFilterAceEthDstAddrRowStatusCreate/delete operations for this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.202.1.1.2.4.3.1.6 |
rcPrFilterAceEthDstAddrOperMaskThe Mac Address mask value in hex which can
be set for the rcPrFilterAceEthDstAddrOper when
the option selected is mask. It will be empty or
set to 000000000000 whenrcPrFilterAceEthDstAddrOper
is set to 'eq'. In case of the prefix '0x' is
specified, 14 charaters is max lengthrw DisplayString .1.3.6.1.4.1.2272.1.202.1.1.2.4.3.1.7 |
rcPrFilterAceEthEtherTableA table of Aces to store Ethernet Ether Header
information of each Ace in context of its parent
Acl. SEQUENCE OF RcPrFilterAceEthEtherEntry .1.3.6.1.4.1.2272.1.202.1.1.2.4.4 |
rcPrFilterAceEthEtherEntryOne Ace entry holding Ace Ethernet Ether
information. An Ace is a member of one Acl. RcPrFilterAceEthEtherEntry .1.3.6.1.4.1.2272.1.202.1.1.2.4.4.1 |
rcPrFilterAceEthEtherAclIdAn index to the AceEthEtherEntry, a unique
identifier for Acl entry in the range of Table
Size.ro INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.4.4.1.1 |
rcPrFilterAceEthEtherAceIdAn index to the AceEthEtherEntry, a unique
identifier for Acl entry in the range of Table
Size.ro INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.4.4.1.2 |
rcPrFilterAceEthEtherTypeListEtherType value from ethernet header. For example ARP
uses 0x0806, IP uses 0x0800. The platform support
determines the behavior for 802.1Q/p tagged packets.
The EtherType for 802.1Q tagged frames is 0x8100.
Valid range for the 16-bit Ether-type is 0..65535
and the attribute supports lists/ranges of values.
Invalid ether-type value 65536 is interpreted as
field is not desired in match criteria.rw OCTET STRING .1.3.6.1.4.1.2272.1.202.1.1.2.4.4.1.3 |
rcPrFilterAceEthEtherTypeListCountCount to store the number of discrete ranges
entered for the ethernet types.rw INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.4.4.1.4 |
rcPrFilterAceEthEtherTypeOperEthernet Type Operators.rw Enumeration .1.3.6.1.4.1.2272.1.202.1.1.2.4.4.1.5 |
rcPrFilterAceEthEtherRowStatusCreate/delete operations for this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.202.1.1.2.4.4.1.6 |
rcPrFilterAceEthVlanTagPrioTableA table of Aces to store Ethernet Vlan Tag
Priority Header information of each Ace in context
of its parent Acl. SEQUENCE OF RcPrFilterAceEthVlanTagPrioEntry .1.3.6.1.4.1.2272.1.202.1.1.2.4.5 |
rcPrFilterAceEthVlanTagPrioEntryOne Ace entry holding Ace Ethernet Vlan Tag Priority
information. An Ace is a member of one Acl. RcPrFilterAceEthVlanTagPrioEntry .1.3.6.1.4.1.2272.1.202.1.1.2.4.5.1 |
rcPrFilterAceEthVlanTagPrioAclIdAn index to the AceEthVlanTagPrioEntry, a unique
identifier for Acl entry in the range of Table
Size.ro INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.4.5.1.1 |
rcPrFilterAceEthVlanTagPrioAceIdAn index to the AceEthVlanTagPrioEntry, a unique
identifier for Acl entry in the range of Table
Size.ro INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.4.5.1.2 |
rcPrFilterAceEthVlanTagPrioVlanTagPrioPriority bits (3-bit field) from the 802.1Q/p tag.rw Enumeration .1.3.6.1.4.1.2272.1.202.1.1.2.4.5.1.3 |
rcPrFilterAceEthVlanTagPrioOperOperators for Ace Ethernet Vlan Tag Priority.rw Enumeration .1.3.6.1.4.1.2272.1.202.1.1.2.4.5.1.4 |
rcPrFilterAceEthVlanTagPrioRowStatusCreate/delete operations for this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.202.1.1.2.4.5.1.5 |
rcPrFilterAceEthVlanTagPrioOperMaskThe mask value in hex which can be set for the
rcPrFilterAceEthVlanTagPrioOper when the option
selected is masked. This object is applicable for
VSP9000. Not for ERS8600rw Integer32 (0..'7'h) .1.3.6.1.4.1.2272.1.202.1.1.2.4.5.1.6 |
rcPrFilterAceEthPortTableA table of Aces to store Ethernet Port
Header information of each Ace in context
of its parent Acl. SEQUENCE OF RcPrFilterAceEthPortEntry .1.3.6.1.4.1.2272.1.202.1.1.2.4.6 |
rcPrFilterAceEthPortEntryOne Ace entry holding Ace Ethernet Port
information. An Ace is a member of one Acl. RcPrFilterAceEthPortEntry .1.3.6.1.4.1.2272.1.202.1.1.2.4.6.1 |
rcPrFilterAceEthPortAclIdAn index to the AceEthPortEntry, a unique
identifier for Acl entry in the range of Table
Size.ro INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.4.6.1.1 |
rcPrFilterAceEthPortAceIdAn index to the AceEthPortEntry, a unique
identifier for Acl entry in the range of Table
Size.ro INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.4.6.1.2 |
rcPrFilterAceEthPortPortPort Number or Port List to match on.rw PortSet .1.3.6.1.4.1.2272.1.202.1.1.2.4.6.1.3 |
rcPrFilterAceEthPortOperOperator for Ace Ethernet Port.rw Enumeration .1.3.6.1.4.1.2272.1.202.1.1.2.4.6.1.4 |
rcPrFilterAceEthPortRowStatusCreate/delete operations for this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.202.1.1.2.4.6.1.5 |
rcPrFilterAceEthVlanIdTableA table of Aces to store Ethernet Vlan Id
Header information of each Ace in context
of its parent Acl. SEQUENCE OF RcPrFilterAceEthVlanIdEntry .1.3.6.1.4.1.2272.1.202.1.1.2.4.7 |
rcPrFilterAceEthVlanIdEntryOne Ace entry holding Ace Ethernet Vlan Id
information. An Ace is a member of one Acl. RcPrFilterAceEthVlanIdEntry .1.3.6.1.4.1.2272.1.202.1.1.2.4.7.1 |
rcPrFilterAceEthVlanIdAclIdAn index to the AceEthVlanIdEntry, a unique
identifier for Acl entry in the range of Table
Size.ro INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.4.7.1.1 |
rcPrFilterAceEthVlanIdAceIdAn index to the AceEthVlanIdEntry, a unique
identifier for Acl entry in the range of Table
Size.ro INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.4.7.1.2 |
rcPrFilterAceEthVlanIdVlanIdListVlan Id to match on. This is a ERS 8600 supported object.
VSP9000 uses rcPrFilterAceEthVlanIdVlanId insteadrw IdList .1.3.6.1.4.1.2272.1.202.1.1.2.4.7.1.3 |
rcPrFilterAceEthVlanIdOperOperator for Ace Ethernet VlanId.rw Enumeration .1.3.6.1.4.1.2272.1.202.1.1.2.4.7.1.4 |
rcPrFilterAceEthVlanIdRowStatusCreate/delete operations for this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.202.1.1.2.4.7.1.5 |
rcPrFilterAceEthVlanIdOperMaskThe mask value in hex which can be set for the
rcPrFilterAceEthVlanIdOper when the option
selected is mask. This object is used with
rcPrFilterAceEthVlanIdVlanId in VSP 9000 to
replace rcPrFilterAceEthVlanIdVlanIdListrw Integer32(0..'FFF'h) .1.3.6.1.4.1.2272.1.202.1.1.2.4.7.1.6 |
rcPrFilterAceEthVlanIdVlanIdVlan Id to match on. VSP9000 use this object with
object rcPrFilterAceEthVlanIdOperMask to replace the
rcPrFilterAceEthVlanIdVlanIdListrw INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.4.7.1.7 |
rcPrFilterAceArpTableA table of Aces to store Arp Header information
of each Ace in context of its parent Acl. SEQUENCE OF RcPrFilterAceArpEntry .1.3.6.1.4.1.2272.1.202.1.1.2.4.8 |
rcPrFilterAceArpEntryOne Ace entry holding Ace Arp Header information.
Ace is a member of one Acl. RcPrFilterAceArpEntry .1.3.6.1.4.1.2272.1.202.1.1.2.4.8.1 |
rcPrFilterAceArpAclIdAn index to the AceArpEntry, a unique
identifier for Acl entry in the range of Table
Size.ro INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.4.8.1.1 |
rcPrFilterAceArpAceIdAn index to the AceArpEntry, a unique
identifier for Acl entry in the range of Table
Size.ro INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.4.8.1.2 |
rcPrFilterAceArpTypeAce Arp Operation.rw Enumeration .1.3.6.1.4.1.2272.1.202.1.1.2.4.8.1.3 |
rcPrFilterAceArpOperOperator for Ace Arp Operation.rw Enumeration .1.3.6.1.4.1.2272.1.202.1.1.2.4.8.1.4 |
rcPrFilterAceArpValueAce Arp can be a request or a response.rw Enumeration .1.3.6.1.4.1.2272.1.202.1.1.2.4.8.1.5 |
rcPrFilterAceArpRowStatusCreate/delete operations for this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.202.1.1.2.4.8.1.6 |
rcPrFilterAceIpSrcAddrTableA table of Aces to store IP Source Address Header
information of each Ace in context of its parent Acl. SEQUENCE OF RcPrFilterAceIpSrcAddrEntry .1.3.6.1.4.1.2272.1.202.1.1.2.4.9 |
rcPrFilterAceIpSrcAddrEntryOne Ace entry holding Ace IP Source Address Header
information. An Ace is a member of one Acl. RcPrFilterAceIpSrcAddrEntry .1.3.6.1.4.1.2272.1.202.1.1.2.4.9.1 |
rcPrFilterAceIpSrcAddrAclIdAn index to the AceIpSrcAddrEntry, a unique
identifier for Acl entry in the range of Table
Size.ro INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.4.9.1.1 |
rcPrFilterAceIpSrcAddrAceIdAn index to the AceIpSrcAddrEntry, a unique
identifier for Acl entry in the range of Table
Size.ro INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.4.9.1.2 |
rcPrFilterAceIpSrcAddrOperOperators for Ace Ip Source Address.rw Enumeration .1.3.6.1.4.1.2272.1.202.1.1.2.4.9.1.5 |
rcPrFilterAceIpSrcAddrRowStatusCreate/delete operations for this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.202.1.1.2.4.9.1.6 |
rcPrFilterAceIpSrcAddrIpAddrIP Source Address to match from IP header.
This object is defined and used to replace
the rcPrFilterAceIpSrcAddrList by VSP 9000rw IpAddress .1.3.6.1.4.1.2272.1.202.1.1.2.4.9.1.7 |
rcPrFilterAceIpSrcAddrOperMaskRangeThe IP Mask value or High IP address based on
object rcPrFilterAceIpSrcAddrOper mask/range
option is selected.rw IpAddress .1.3.6.1.4.1.2272.1.202.1.1.2.4.9.1.8 |
rcPrFilterAceIpDstAddrTableA table of Aces to store IP Destination Address
Header information of each Ace in context of its
parent Acl. SEQUENCE OF RcPrFilterAceIpDstAddrEntry .1.3.6.1.4.1.2272.1.202.1.1.2.4.10 |
rcPrFilterAceIpDstAddrEntryOne Ace entry holding Ace IP Destination Address
Header information. An Ace is a member of one Acl. RcPrFilterAceIpDstAddrEntry .1.3.6.1.4.1.2272.1.202.1.1.2.4.10.1 |
rcPrFilterAceIpDstAddrAclIdAn index to the AceIpDstAddrEntry, a unique
identifier for Acl entry in the range of Table
Size.ro INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.4.10.1.1 |
rcPrFilterAceIpDstAddrAceIdAn index to the AceIpDstAddrEntry, a unique
identifier for Acl entry in the range of Table
Size.ro INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.4.10.1.2 |
rcPrFilterAceIpDstAddrOperOperators for Ace IP Destination Address.rw Enumeration .1.3.6.1.4.1.2272.1.202.1.1.2.4.10.1.5 |
rcPrFilterAceIpDstAddrRowStatusCreate/delete operations for this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.202.1.1.2.4.10.1.6 |
rcPrFilterAceIpDstAddrIpAddrIP Source Address to match from IP header.
This object is defined and used to replace
the rcPrFilterAceIpSrcAddrList by VSP 9000rw IpAddress .1.3.6.1.4.1.2272.1.202.1.1.2.4.10.1.7 |
rcPrFilterAceIpDstAddrOperMaskRangeThe IP mask value or Hi Ip address based on
object rcPrFilterAceIpDstAddrOper mask/range
option is selected.rw IpAddress .1.3.6.1.4.1.2272.1.202.1.1.2.4.10.1.8 |
rcPrFilterAceIpDscpTableA table of Aces to store IP Dscp Header information
of each Ace in context of its parent Acl. SEQUENCE OF RcPrFilterAceIpDscpEntry .1.3.6.1.4.1.2272.1.202.1.1.2.4.11 |
rcPrFilterAceIpDscpEntryOne Ace entry holding Ace IP Dscp Header information.
An Ace is a member of one Acl. RcPrFilterAceIpDscpEntry .1.3.6.1.4.1.2272.1.202.1.1.2.4.11.1 |
rcPrFilterAceIpDscpAclIdAn index to the AceIpDscpEntry, a unique
identifier for Acl entry in the range of Table
Size.ro INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.4.11.1.1 |
rcPrFilterAceIpDscpAceIdAn index to the AceIpDscpEntry, a unique
identifier for Acl entry in the range of Table
Size.ro INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.4.11.1.2 |
rcPrFilterAceIpDscpListThe 6-bit DSCP field from the ToS byte in Ipv4 header
encodes the PHB information per DiffServ standards
(Refer to DiffServ RFCs 2474). Set the Dscp to PHB
(like EF) or PHB-class(like AF1 which includes AF11,
AF12,AF13) to match specific diffserv class traffic.
Set the field value to desired dscp code for
'rcPrFilterAceIpDscp' field to match non-standard
traffic classes and local use PHBs.rw OCTET STRING .1.3.6.1.4.1.2272.1.202.1.1.2.4.11.1.3 |
rcPrFilterAceIpDscpListCountCount to store the number of discrete ranges
entered for the dscp values.rw INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.4.11.1.4 |
rcPrFilterAceIpDscpOperOperators for Ace Ip Dscp.rw Enumeration .1.3.6.1.4.1.2272.1.202.1.1.2.4.11.1.5 |
rcPrFilterAceIpDscpRowStatusCreate/delete operations for this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.202.1.1.2.4.11.1.6 |
rcPrFilterAceIpDscpOperMaskThe mask value in hex which can be set for the
rcPrFilterAceIpDscpOper when the option
selected is mask. It will be set to 0 or be used
when rcPrFilterAceIpDscpOper is set ro eqrw Integer32(0..'40'h) .1.3.6.1.4.1.2272.1.202.1.1.2.4.11.1.7 |
rcPrFilterAceIpProtoTableA table of Aces to store IP Proto Header information
of each Ace in context of its parent Acl. SEQUENCE OF RcPrFilterAceIpProtoEntry .1.3.6.1.4.1.2272.1.202.1.1.2.4.12 |
rcPrFilterAceIpProtoEntryOne Ace entry holding Ace IP Proto Header information.
An Ace is a member of one Acl. RcPrFilterAceIpProtoEntry .1.3.6.1.4.1.2272.1.202.1.1.2.4.12.1 |
rcPrFilterAceIpProtoAclIdAn index to the AceIpProtoEntry, a unique
identifier for Acl entry in the range of Table
Size.ro INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.4.12.1.1 |
rcPrFilterAceIpProtoAceIdAn index to the AceIpProtoEntry, a unique
identifier for Acl entry in the range of Table
Size.ro INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.4.12.1.2 |
rcPrFilterAceIpProtoListIp protocol Type from the ip header to be matched.
Valid Ip protocol range is 0..255. Few of the Protocol
Types are enumerated above. In case the desired
protocol number is not available in the enumerated
list set protocol to desired integer valuerw OCTET STRING .1.3.6.1.4.1.2272.1.202.1.1.2.4.12.1.3 |
rcPrFilterAceIpProtoListCountCount to store the number of discrete ranges
entered for the ethernet protocol ids.rw INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.4.12.1.4 |
rcPrFilterAceIpProtoOperOperators for Ace Ip Protocols.rw Enumeration .1.3.6.1.4.1.2272.1.202.1.1.2.4.12.1.5 |
rcPrFilterAceIpProtoRowStatusCreate/delete operations for this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.202.1.1.2.4.12.1.6 |
rcPrFilterAceIpOptionsTableA table of Aces to store IP Options Header
information of each Ace in context of its parent Acl. SEQUENCE OF RcPrFilterAceIpOptionsEntry .1.3.6.1.4.1.2272.1.202.1.1.2.4.13 |
rcPrFilterAceIpOptionsEntryOne Ace entry holding Ace IP Options Header
information. An Ace is a member of one Acl. RcPrFilterAceIpOptionsEntry .1.3.6.1.4.1.2272.1.202.1.1.2.4.13.1 |
rcPrFilterAceIpOptionsAclIdAn index to the AceIpOptionsEntry, a unique
identifier for Acl entry in the range of Table
Size.ro INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.4.13.1.1 |
rcPrFilterAceIpOptionsAceIdAn index to the AceIpOptionsEntry, a unique
identifier for Acl entry in the range of Table
Size.ro INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.4.13.1.2 |
rcPrFilterAceIpOptionsOptionsIp options to be matched from the IP Header.rw Enumeration .1.3.6.1.4.1.2272.1.202.1.1.2.4.13.1.3 |
rcPrFilterAceIpOptionsOperLogical Operator - only 'any' is valid at present.rw Enumeration .1.3.6.1.4.1.2272.1.202.1.1.2.4.13.1.4 |
rcPrFilterAceIpOptionsRowStatusCreate/delete operations for this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.202.1.1.2.4.13.1.5 |
rcPrFilterAceIpFragTableA table of Aces to store IP Fragmentation Header
information of each Ace in context of its parent Acl. SEQUENCE OF RcPrFilterAceIpFragEntry .1.3.6.1.4.1.2272.1.202.1.1.2.4.14 |
rcPrFilterAceIpFragEntryOne Ace entry holding Ace IP Fragmentation Header
information. An Ace is a member of one Acl. RcPrFilterAceIpFragEntry .1.3.6.1.4.1.2272.1.202.1.1.2.4.14.1 |
rcPrFilterAceIpFragAclIdAn index to the AceIpFragEntry, a unique
identifier for Acl entry in the range of Table
Size.ro INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.4.14.1.1 |
rcPrFilterAceIpFragAceIdAn index to the AceIpFragEntry, a unique
identifier for Acl entry in the range of Table
Size.ro INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.4.14.1.2 |
rcPrFilterAceIpFragFragmentationIp Fragmentation bits to be matched from the IP
Header.rw Enumeration .1.3.6.1.4.1.2272.1.202.1.1.2.4.14.1.3 |
rcPrFilterAceIpFragOperOperator for Ip fragmentation.rw Enumeration .1.3.6.1.4.1.2272.1.202.1.1.2.4.14.1.4 |
rcPrFilterAceIpFragRowStatusCreate/delete operations for this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.202.1.1.2.4.14.1.5 |
rcPrFilterAceProtoTcpSrcPortTableA table of Aces to store TCP Source Port information
of each Ace in context of its parent Acl. SEQUENCE OF RcPrFilterAceProtoTcpSrcPortEntry .1.3.6.1.4.1.2272.1.202.1.1.2.4.15 |
rcPrFilterAceProtoTcpSrcPortEntryOne entry holding Ace Protocol TCP Source Port
information. An Ace is a member of one Acl. RcPrFilterAceProtoTcpSrcPortEntry .1.3.6.1.4.1.2272.1.202.1.1.2.4.15.1 |
rcPrFilterAceProtoTcpSrcPortAclIdAn index to the AceProtoTcpSrcPortEntry, a unique
identifier for Acl entry in the range of Table
Size.ro INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.4.15.1.1 |
rcPrFilterAceProtoTcpSrcPortAceIdAn index to the AceProtoTcpSrcPortEntry, a unique
identifier for Ace entry in the range of Table
Size.ro INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.4.15.1.2 |
rcPrFilterAceProtoTcpSrcPortPortPort Number or Port List to match on.rw OCTET STRING .1.3.6.1.4.1.2272.1.202.1.1.2.4.15.1.3 |
rcPrFilterAceProtoTcpSrcPortCountCount to store the number of discrete ranges
entered for the TCP source port.rw INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.4.15.1.4 |
rcPrFilterAceProtoTcpSrcPortOperOperator for Ace Protocol TcpSrcPort.rw Enumeration .1.3.6.1.4.1.2272.1.202.1.1.2.4.15.1.5 |
rcPrFilterAceProtoTcpSrcPortRowStatusCreate/delete operations for this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.202.1.1.2.4.15.1.6 |
rcPrFilterAceProtoUdpSrcPortTableA table of Aces to store UDP Source Port information
of each Ace in context of its parent Acl. SEQUENCE OF RcPrFilterAceProtoUdpSrcPortEntry .1.3.6.1.4.1.2272.1.202.1.1.2.4.16 |
rcPrFilterAceProtoUdpSrcPortEntryOne entry holding Ace Protocol UDP Source Port
information. An Ace is a member of one Acl. RcPrFilterAceProtoUdpSrcPortEntry .1.3.6.1.4.1.2272.1.202.1.1.2.4.16.1 |
rcPrFilterAceProtoUdpSrcPortAclIdAn index to the AceProtoUdpSrcPortEntry, a unique
identifier for Acl entry in the range of Table
Size.ro INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.4.16.1.1 |
rcPrFilterAceProtoUdpSrcPortAceIdAn index to the AceProtoUdpSrcPortEntry, a unique
identifier for Ace entry in the range of Table
Size.ro INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.4.16.1.2 |
rcPrFilterAceProtoUdpSrcPortPortPort Number or Port List to match on.rw OCTET STRING .1.3.6.1.4.1.2272.1.202.1.1.2.4.16.1.3 |
rcPrFilterAceProtoUdpSrcPortCountCount to store the number of discrete ranges
entered for the UDP source port.rw INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.4.16.1.4 |
rcPrFilterAceProtoUdpSrcPortOperOperator for Ace Protocol UdpSrcPort.rw Enumeration .1.3.6.1.4.1.2272.1.202.1.1.2.4.16.1.5 |
rcPrFilterAceProtoUdpSrcPortRowStatusCreate/delete operations for this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.202.1.1.2.4.16.1.6 |
rcPrFilterAceProtoTcpDstPortTableA table of Aces to store TCP Dest Port information
of each Ace in context of its parent Acl. SEQUENCE OF RcPrFilterAceProtoTcpDstPortEntry .1.3.6.1.4.1.2272.1.202.1.1.2.4.17 |
rcPrFilterAceProtoTcpDstPortEntryOne entry holding Ace Protocol TCP Dest Port
information. An Ace is a member of one Acl. RcPrFilterAceProtoTcpDstPortEntry .1.3.6.1.4.1.2272.1.202.1.1.2.4.17.1 |
rcPrFilterAceProtoTcpDstPortAclIdAn index to the AceProtoTcpDstPortEntry, a unique
identifier for Acl entry in the range of Table
Size.ro INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.4.17.1.1 |
rcPrFilterAceProtoTcpDstPortAceIdAn index to the AceProtoTcpDstPortEntry, a unique
identifier for Ace entry in the range of Table
Size.ro INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.4.17.1.2 |
rcPrFilterAceProtoTcpDstPortPortPort Number or Port List to match on.rw OCTET STRING .1.3.6.1.4.1.2272.1.202.1.1.2.4.17.1.3 |
rcPrFilterAceProtoTcpDstPortCountCount to store the number of discrete ranges
entered for the TCP dest port.rw INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.4.17.1.4 |
rcPrFilterAceProtoTcpDstPortOperOperator for Ace Protocol TcpDstPort.rw Enumeration .1.3.6.1.4.1.2272.1.202.1.1.2.4.17.1.5 |
rcPrFilterAceProtoTcpDstPortRowStatusCreate/delete operations for this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.202.1.1.2.4.17.1.6 |
rcPrFilterAceProtoUdpDstPortTableA table of Aces to store UDP Dest Port information
of each Ace in context of its parent Acl. SEQUENCE OF RcPrFilterAceProtoUdpDstPortEntry .1.3.6.1.4.1.2272.1.202.1.1.2.4.18 |
rcPrFilterAceProtoUdpDstPortEntryOne entry holding Ace Protocol UDP Dest Port
information. An Ace is a member of one Acl. RcPrFilterAceProtoUdpDstPortEntry .1.3.6.1.4.1.2272.1.202.1.1.2.4.18.1 |
rcPrFilterAceProtoUdpDstPortAclIdAn index to the AceProtoUdpDstPortEntry, a unique
identifier for Acl entry in the range of Table
Size.ro INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.4.18.1.1 |
rcPrFilterAceProtoUdpDstPortAceIdAn index to the AceProtoUdpDstPortEntry, a unique
identifier for Ace entry in the range of Table
Size.ro INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.4.18.1.2 |
rcPrFilterAceProtoUdpDstPortPortPort Number or Port List to match on.rw OCTET STRING .1.3.6.1.4.1.2272.1.202.1.1.2.4.18.1.3 |
rcPrFilterAceProtoUdpDstPortCountCount to store the number of discrete ranges
entered for the UDP dest port.rw INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.4.18.1.4 |
rcPrFilterAceProtoUdpDstPortOperOperator for Ace Protocol UdpDstPort.rw Enumeration .1.3.6.1.4.1.2272.1.202.1.1.2.4.18.1.5 |
rcPrFilterAceProtoUdpDstPortRowStatusCreate/delete operations for this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.202.1.1.2.4.18.1.6 |
rcPrFilterAceProtoIcmpMsgTypeTableA table of Aces to store ICMP message type information
of each Ace in context of its parent Acl. SEQUENCE OF RcPrFilterAceProtoIcmpMsgTypeEntry .1.3.6.1.4.1.2272.1.202.1.1.2.4.19 |
rcPrFilterAceProtoIcmpMsgTypeEntryOne entry holding Ace ICMP message type
information. An Ace is a member of one Acl. RcPrFilterAceProtoIcmpMsgTypeEntry .1.3.6.1.4.1.2272.1.202.1.1.2.4.19.1 |
rcPrFilterAceProtoIcmpMsgTypeAclIdAn index to the AceProtoIcmpMsgTypeEntry, a unique
identifier for Acl entry in the range of Table
Size.ro INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.4.19.1.1 |
rcPrFilterAceProtoIcmpMsgTypeAceIdAn index to the AceProtoIcmpMsgTypeEntry, a unique
identifier for Ace entry in the range of Table
Size.ro INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.4.19.1.2 |
rcPrFilterAceProtoIcmpMsgTypeListOne or a list of Icmp messages to be matched.
Need to provide strings, number of protocol header
types (pre-defined values plus user-defined headers).
Valid range is 0 to 255 (reserved).rw OCTET STRING .1.3.6.1.4.1.2272.1.202.1.1.2.4.19.1.3 |
rcPrFilterAceProtoIcmpMsgTypeCountCount to store the number of discrete ranges
entered for the ICMP message types.rw INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.4.19.1.4 |
rcPrFilterAceProtoIcmpMsgTypeOperOperator for Ace Protocol IcmpMsgTypes.rw Enumeration .1.3.6.1.4.1.2272.1.202.1.1.2.4.19.1.5 |
rcPrFilterAceProtoIcmpMsgTypeRowStatusCreate/delete operations for this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.202.1.1.2.4.19.1.6 |
rcPrFilterAceProtoTcpFlagsTableA table of Aces to store TCP Flags information
of each Ace in context of its parent Acl. SEQUENCE OF RcPrFilterAceProtoTcpFlagsEntry .1.3.6.1.4.1.2272.1.202.1.1.2.4.20 |
rcPrFilterAceProtoTcpFlagsEntryOne entry holding Ace Protocol TCP flags
information. An Ace is a member of one Acl. RcPrFilterAceProtoTcpFlagsEntry .1.3.6.1.4.1.2272.1.202.1.1.2.4.20.1 |
rcPrFilterAceProtoTcpFlagsAclIdAn index to the rcPrFilterAceProtoTcpFlagsEntry,
a unique identifier for Acl entry in the range of Table
Size.ro INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.4.20.1.1 |
rcPrFilterAceProtoTcpFlagsAceIdAn index to the rcPrFilterAceProtoTcpFlagsEntry,
a unique identifier for Ace entry in the
range of Table Size.ro INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.4.20.1.2 |
rcPrFilterAceProtoTcpFlagsListOne or a list of Tcp flags to be matched.
Need to provide strings, number of protocol header
types (pre-defined values plus user-defined headers).
Valid range is 0 to 63rw OCTET STRING .1.3.6.1.4.1.2272.1.202.1.1.2.4.20.1.3 |
rcPrFilterAceProtoTcpFlagsCountCount to store the number of discrete ranges
entered for the TCP flags.rw INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.4.20.1.4 |
rcPrFilterAceProtoTcpFlagsOperOperator for Ace Protocol TcpFlags.rw Enumeration .1.3.6.1.4.1.2272.1.202.1.1.2.4.20.1.5 |
rcPrFilterAceProtoTcpFlagsRowStatusCreate/delete operations for this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.202.1.1.2.4.20.1.6 |
rcPrFilterAceProtoTcpFlagsOperMaskThe mask value in hex which can be set for the
rcPrFilterAceProtoTcpFlagsOper when the option
selected is mask. It will be set 0x0 when object
rcPrFilterAceProtoTcpFlagsOper is set to eqrw Integer32(0..'3F'h) .1.3.6.1.4.1.2272.1.202.1.1.2.4.20.1.7 |
rcPrFilterAcePattern1TableA table of pattern fields for Aces to manage the
settings for each user defined field. SEQUENCE OF RcPrFilterAcePattern1Entry .1.3.6.1.4.1.2272.1.202.1.1.2.4.21 |
rcPrFilterAcePattern1EntryOne Ace entry holding Ace User Defined Pattern
information. Ace is a member of one Acl. RcPrFilterAcePattern1Entry .1.3.6.1.4.1.2272.1.202.1.1.2.4.21.1 |
rcPrFilterAcePattern1AclIdAn index to the AcePatternEntry, a unique
identifier for Acl entry in the range of Table
Size.ro INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.4.21.1.1 |
rcPrFilterAcePattern1AceIdAn index to the AcePatternEntry, a unique
identifier for Acl entry in the range of Table
Size.ro INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.4.21.1.2 |
rcPrFilterAcePattern1NameA descriptive name chosen by the administrator for
the Ace Pattern Entry.rw DisplayString .1.3.6.1.4.1.2272.1.202.1.1.2.4.21.1.3 |
rcPrFilterAcePattern1ValueSet the pattern value as numeric string. The numeric
value of each byte is encoded in one octet of the
string. Unused bytes are left at the trailing end of
string. The number of bytes to extract from this string
is set in rcPrFilterActPatternLength.rw OCTET STRING .1.3.6.1.4.1.2272.1.202.1.1.2.4.21.1.4 |
rcPrFilterAcePattern1OperOperators for Ace Pattern.rw Enumeration .1.3.6.1.4.1.2272.1.202.1.1.2.4.21.1.5 |
rcPrFilterAcePattern1RowStatusCreate/delete operations for this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.202.1.1.2.4.21.1.6 |
rcPrFilterAcePattern2TableA table of pattern fields for Aces to manage the
settings for each user defined field. SEQUENCE OF RcPrFilterAcePattern2Entry .1.3.6.1.4.1.2272.1.202.1.1.2.4.22 |
rcPrFilterAcePattern2EntryOne Ace entry holding Ace User Defined Pattern
information. Ace is a member of one Acl. RcPrFilterAcePattern2Entry .1.3.6.1.4.1.2272.1.202.1.1.2.4.22.1 |
rcPrFilterAcePattern2AclIdAn index to the AcePatternEntry, a unique
identifier for Acl entry in the range of Table
Size.ro INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.4.22.1.1 |
rcPrFilterAcePattern2AceIdAn index to the AcePatternEntry, a unique
identifier for Acl entry in the range of Table
Size.ro INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.4.22.1.2 |
rcPrFilterAcePattern2NameA descriptive name chosen by the administrator for
the Ace Pattern Entry.rw DisplayString .1.3.6.1.4.1.2272.1.202.1.1.2.4.22.1.3 |
rcPrFilterAcePattern2ValueSet the pattern value as numeric string. The numeric
value of each byte is encoded in one octet of the
string. Unused bytes are left at the trailing end of
string. The number of bytes to extract from this string
is set in rcPrFilterActPatternLength.rw OCTET STRING .1.3.6.1.4.1.2272.1.202.1.1.2.4.22.1.4 |
rcPrFilterAcePattern2OperOperators for Ace Pattern.rw Enumeration .1.3.6.1.4.1.2272.1.202.1.1.2.4.22.1.5 |
rcPrFilterAcePattern2RowStatusCreate/delete operations for this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.202.1.1.2.4.22.1.6 |
rcPrFilterAcePattern3TableA table of pattern fields for Aces to manage the
settings for each user defined field. SEQUENCE OF RcPrFilterAcePattern3Entry .1.3.6.1.4.1.2272.1.202.1.1.2.4.23 |
rcPrFilterAcePattern3EntryOne Ace entry holding Ace User Defined Pattern
information. Ace is a member of one Acl. RcPrFilterAcePattern3Entry .1.3.6.1.4.1.2272.1.202.1.1.2.4.23.1 |
rcPrFilterAcePattern3AclIdAn index to the AcePatternEntry, a unique
identifier for Acl entry in the range of Table
Size.ro INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.4.23.1.1 |
rcPrFilterAcePattern3AceIdAn index to the AcePatternEntry, a unique
identifier for Acl entry in the range of Table
Size.ro INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.4.23.1.2 |
rcPrFilterAcePattern3NameA descriptive name chosen by the administrator for
the Ace Pattern Entry.rw DisplayString .1.3.6.1.4.1.2272.1.202.1.1.2.4.23.1.3 |
rcPrFilterAcePattern3ValueSet the pattern value as numeric string. The numeric
value of each byte is encoded in one octet of the
string. Unused bytes are left at the trailing end of
string. The number of bytes to extract from this string
is set in rcPrFilterActPatternLength.rw OCTET STRING .1.3.6.1.4.1.2272.1.202.1.1.2.4.23.1.4 |
rcPrFilterAcePattern3OperOperators for Ace Pattern.rw Enumeration .1.3.6.1.4.1.2272.1.202.1.1.2.4.23.1.5 |
rcPrFilterAcePattern3RowStatusCreate/delete operations for this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.202.1.1.2.4.23.1.6 |
rcPrFilterAceStatsTableA table of ACE Statistics Entries to store per-ACE-per-Port
Statistics SEQUENCE OF RcPrFilterAceStatsEntry .1.3.6.1.4.1.2272.1.202.1.1.2.4.24 |
rcPrFilterAceStatsEntryAce Statistics entry holding per-ACE-per-port Statistics RcPrFilterAceStatsEntry .1.3.6.1.4.1.2272.1.202.1.1.2.4.24.1 |
rcPrFilterAceStatsAclIdAn index to the AceStatsEntry, a unique
identifier for Acl entry in the range of Table Size.ro INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.4.24.1.1 |
rcPrFilterAceStatsAceIdAn index to the AceStatsEntry, a unique identifier
for ACE entry in the range of Table Size.ro INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.4.24.1.2 |
rcPrFilterAceStatsPortIdAn index to the AceStatsEntry, a unique identifier
of the portId. This object is not being used in
VSP 9000. It should be alway in VVSP 9000ro INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.4.24.1.3 |
rcPrFilterAceStatsMatchCountPktsCount of packets that match this particular Ace on this
particular port.ro Counter64 .1.3.6.1.4.1.2272.1.202.1.1.2.4.24.1.4 |
rcPrFilterAceStatsMatchCountOctetsByte count of traffic that match this particular Ace on
this particular portro Counter64 .1.3.6.1.4.1.2272.1.202.1.1.2.4.24.1.5 |
rcPrFilterAceStatsClearClear Per-ACE-Per-Port statistics.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.202.1.1.2.4.24.1.6 |
rcPrFilterAceEthShowTableA table of Aces to store Ethernet Header
information of each Ace in context of
its parent Acl. SEQUENCE OF RcPrFilterAceEthShowEntry .1.3.6.1.4.1.2272.1.202.1.1.2.4.25 |
rcPrFilterAceEthShowEntryOne Ace entry holding Ace Ethernet information.
Ace is a member of one Acl. RcPrFilterAceEthShowEntry .1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1 |
rcPrFilterAceEthShowAclIdAn index to the AceEthernetEntry, a unique
identifier for Acl entry in the range of Table
Size.ro INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.1 |
rcPrFilterAceEthShowAceIdAn index to the AceEthernetEntry, a unique
identifier for Acl entry in the range of Table
Size.ro INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.2 |
rcPrFilterAceEthShowSrcAddrListThe list of ethernet source address to match.ro OCTET STRING .1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.3 |
rcPrFilterAceEthShowSrcAddrOperOperators for Ace Ethernet Source MAC Address.ro Enumeration .1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.4 |
rcPrFilterAceEthShowDstAddrListList of ethernet destination address to
match.ro OCTET STRING .1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.5 |
rcPrFilterAceEthShowDstAddrOperOperators for Ace Ethernet Destination MAC Address.ro Enumeration .1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.6 |
rcPrFilterAceEthShowEtherTypeListEtherType value from ethernet header. For example ARP
uses 0x0806, IP uses 0x0800. The platform support
determines the behavior for 802.1Q/p tagged packets.
The EtherType for 802.1Q tagged frames is 0x8100.
Valid range for the 16-bit Ether-type is 0..65535
and the attribute supports lists/ranges of values.
Invalid ether-type value 65536 is interpreted as
field is not desired in match criteria.ro OCTET STRING .1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.7 |
rcPrFilterAceEthShowEtherTypeOperEthernet Type Operators.ro Enumeration .1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.8 |
rcPrFilterAceEthShowVlanTagPrioPriority bits (3-bit field) from the 802.1Q/p tag.ro Enumeration .1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.9 |
rcPrFilterAceEthShowVlanTagPrioOperOperators for Ace Ethernet Vlan Tag Priority.ro Enumeration .1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.10 |
rcPrFilterAceEthShowPortPort Number or Port List to match on.ro PortSet .1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.11 |
rcPrFilterAceEthShowPortOperOperator for Ace Ethernet Port.ro Enumeration .1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.12 |
rcPrFilterAceEthShowVlanIdOperOperator for Ace Ethernet VlanId.ro Enumeration .1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.14 |
rcPrFilterAceEthShowSrcAddrOperMaskThe mask value in hex which can be set for the
rcPrFilterAceEthSrcAddrOper when the option
selected is mask. It will be empty or
set to 000000000000 whenrcPrFilterAceEthDstAddrOper
is set to 'eq'. In case of the prefix '0x' is
specified, 14 charaters is max lengthro DisplayString .1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.15 |
rcPrFilterAceEthShowDstAddrOperMaskThe mask value in hex which can be set for the
rcPrFilterAceEthDstAddrOper when the option
selected is mask. It will be empty or
set to 000000000000 whenrcPrFilterAceEthDstAddrOper
is set to 'eq'. In case of the prefix '0x' is
specified, 14 charaters is max lengthro DisplayString .1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.16 |
rcPrFilterAceEthShowVlanTagPrioOperMaskThe mask value in hex which can be set for the
rcPrFilterAceEthVlanTagPrioOper when the option
selected is masked. This object is applicable for
VSP9000. Not for ERS8600ro Integer32 (0..'7'h) .1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.17 |
rcPrFilterAceEthShowVlanIdOperMaskThe mask value in hex which can be set for the
rcPrFilterAceEthVlanIdOper when the option
selected is mask. This object is used with
rcPrFilterAceEthVlanIdVlanId in VSP 9000 to
replace rcPrFilterAceEthVlanIdVlanIdListro Integer32(0..'FFF'h) .1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.18 |
rcPrFilterAceEthShowVlanIdVlan Id to match on. VSP9000 use this object with
object rcPrFilterAceEthVlanIdOperMask to replace the
rcPrFilterAceEthVlanIdVlanIdListro INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.19 |
rcPrFilterAceIpShowTableA table of Aces to store IP Header
information of each Ace in context of
its parent Acl. SEQUENCE OF RcPrFilterAceIpShowEntry .1.3.6.1.4.1.2272.1.202.1.1.2.4.26 |
rcPrFilterAceIpShowEntryOne Ace entry holding Ace IP information.
Ace is a member of one Acl. RcPrFilterAceIpShowEntry .1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1 |
rcPrFilterAceIpShowAclIdAn index to the AceIpShowEntry, a unique
identifier for Acl entry in the range of Table
Size.ro INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.1 |
rcPrFilterAceIpShowAceIdAn index to the AceIpShowEntry, a unique
identifier for Acl entry in the range of Table
Size.ro INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.2 |
rcPrFilterAceIpShowSrcAddrOperOperators for Ace Ip Source Address.ro Enumeration .1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.4 |
rcPrFilterAceIpShowDstAddrOperOperators for Ace Ip Destination Address.ro Enumeration .1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.6 |
rcPrFilterAceIpShowDscpListThe 6-bit DSCP field from the ToS byte in Ipv4 header
encodes the PHB information per DiffServ standards
(Refer to DiffServ RFCs 2474). Set the Dscp to PHB
(like EF) or PHB-class(like AF1 which includes AF11,
AF12,AF13) to match specific diffserv class traffic.
Set the field value to desired dscp code for
'rcPrFilterAceIpDscp' field to match non-standard
traffic classes and local use PHBs.ro OCTET STRING .1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.7 |
rcPrFilterAceIpShowDscpOperOperators for Ace Ip Dscp.ro Enumeration .1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.8 |
rcPrFilterAceIpShowProtoListIp protocol Type from the ip header to be matched.
Valid Ip protocol range is 0..255. Few of the Protocol
Types are enumerated above. In case the desired
protocol number is not available in the enumerated
list set protocol to desired integer valuero OCTET STRING .1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.9 |
rcPrFilterAceIpShowProtoOperOperators for Ace Ip Protocols.ro Enumeration .1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.10 |
rcPrFilterAceIpShowOptionsIp options to be matched from the IP Header.ro Enumeration .1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.11 |
rcPrFilterAceIpShowOptionsOperLogical Operator - only 'any' is valid at present.ro Enumeration .1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.12 |
rcPrFilterAceIpShowFragmentationIp Fragmentation bits to be matched from the IP
Header.ro Enumeration .1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.13 |
rcPrFilterAceIpShowFragOperOperator for Ip fragmentation.ro Enumeration .1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.14 |
rcPrFilterAceIpShowSrcAddrIpAddrIP Source Address to match from IP header.
This object is defined and used to replace
the rcPrFilterAceIpSrcAddrList by VSP 9000ro IpAddress .1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.15 |
rcPrFilterAceIpShowSrcAddrOperMaskRangeThe IP Mask value or High IP address based on
object rcPrFilterAceIpSrcAddrOper mask/range
option is selected.ro IpAddress .1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.16 |
rcPrFilterAceIpShowDstAddrIpAddrIP Source Address to match from IP header.
This object is defined and used to replace
the rcPrFilterAceIpSrcAddrList by VSP 9000ro IpAddress .1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.17 |
rcPrFilterAceIpShowDstAddrOperMaskRangeThe IP mask value or Hi Ip address based on
object rcPrFilterAceIpDstAddrOper mask/range
option is selected.ro IpAddress .1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.18 |
rcPrFilterAceIpShowDscpOperMaskThe mask value in hex which can be set for the
rcPrFilterAceIpDscpOper when the option
selected is mask. It will be set to 0 or be used
when rcPrFilterAceIpDscpOper is set ro eqro Integer32(0..'40'h) .1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.19 |
rcPrFilterAceProtoShowTableA table of Aces to store Protocol Header
information of each Ace in context of
its parent Acl. SEQUENCE OF RcPrFilterAceProtoShowEntry .1.3.6.1.4.1.2272.1.202.1.1.2.4.27 |
rcPrFilterAceProtoShowEntryOne Ace entry holding Ace Ethernet information.
Ace is a member of one Acl. RcPrFilterAceProtoShowEntry .1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1 |
rcPrFilterAceProtoShowAclIdAn index to the AceProtoShowEntry, a unique
identifier for Acl entry in the range of Table
Size.ro INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.1 |
rcPrFilterAceProtoShowAceIdAn index to the AceProtoShowEntry, a unique
identifier for Ace entry in the range of Table
Size.ro INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.2 |
rcPrFilterAceProtoShowIcmpMsgTypeListOne or a list of Icmp messages to be matched.
Need to provide strings, number of protocol header
types (pre-defined values plus user-defined headers).
Valid range is 0 to 255 (reserved).ro OCTET STRING .1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.11 |
rcPrFilterAceProtoShowIcmpMsgTypeOperOperator for Ace Protocol IcmpMsgTypes.ro Enumeration .1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.12 |
rcPrFilterAceProtoShowTcpFlagsListOne or a list of Tcp flags to be matched.
Need to provide strings, number of protocol header
types (pre-defined values plus user-defined headers).
Valid range is 0 to 63ro OCTET STRING .1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.13 |
rcPrFilterAceProtoShowTcpFlagsOperOperator for Ace Protocol TcpFlags.ro Enumeration .1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.14 |
rcPrFilterAceProtoShowSrcPortPort Number or Port List to match on.ro OCTET STRING .1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.15 |
rcPrFilterAceProtoShowSrcPortOperOperator for Ace Protocol SrcPort.ro Enumeration .1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.16 |
rcPrFilterAceProtoShowSrcPortOperMaskRangeThe value should be displayed in hex when
rcPrFilterAceProtoSrcPortOper is set to 'mask'.
This object will be used as a Range high value when
rcPrFilterAceProtoSrcPortOper is set to 'range'.
('range' is not supported in this 3.0 release).
If it is used as range high value, it should be
displayed in decimal formtat.
This object will be set to 0 when
rcPrFilterAceProtoSrcPortOper is set to 'eq'ro Integer32(0..'FFFF'h) .1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.17 |
rcPrFilterAceProtoShowDstPortPort Number or Port List to match on.ro OCTET STRING .1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.18 |
rcPrFilterAceProtoShowDstPortOperOperator for Ace Protocol DstPort.ro Enumeration .1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.19 |
rcPrFilterAceProtoShowDstPortOperMaskRangeThe value should be displayed in hex when
rcPrFilterAceProtoDstPortOper is set to 'mask'.
This object will be used as a Range high value when
rcPrFilterAceProtoDstPortOper is set to 'range'.
('range' is not supported in this 3.0 release).
If it is used as range high value, it should be
displayed in decimal formtat.
This object will be set to 0 when
rcPrFilterAceProtoDstPortOper is set to 'eq'ro Integer32(0..'FFFF'h) .1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.20 |
rcPrFilterAceProtoShowTcpFlagsOperMaskThe mask value in hex which can be set for the
rcPrFilterAceProtoTcpFlagsOper when the option
selected is mask. It will be set 0x0 when object
rcPrFilterAceProtoTcpFlagsOper is set to eqro Integer32(0..'3F'h) .1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.21 |
rcPrFilterAcePatternShowTableA table of Aces to store Pattern 1, 2, 3
Header information of each Ace in context of
its parent Acl. SEQUENCE OF RcPrFilterAcePatternShowEntry .1.3.6.1.4.1.2272.1.202.1.1.2.4.28 |
rcPrFilterAcePatternShowEntryOne Ace entry holding Ace Pattern 1, 2, 3
information. Ace is a member of one Acl. RcPrFilterAcePatternShowEntry .1.3.6.1.4.1.2272.1.202.1.1.2.4.28.1 |
rcPrFilterAcePatternShowAclIdAn index to the AcePatternEntry, a unique
identifier for Acl entry in the range of Table
Size.ro INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.4.28.1.1 |
rcPrFilterAcePatternShowAceIdAn index to the AcePatternEntry, a unique
identifier for Acl entry in the range of Table
Size.ro INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.4.28.1.2 |
rcPrFilterAcePatternShowPattern1NameA descriptive name chosen by the administrator for
the Ace Pattern Entry.ro DisplayString .1.3.6.1.4.1.2272.1.202.1.1.2.4.28.1.3 |
rcPrFilterAcePatternShowPattern1ValueSet the pattern value as numeric string. The numeric
value of each byte is encoded in one octet of the
string. Unused bytes are left at the trailing end of
string. The number of bytes to extract from this string
is set in rcPrFilterActPatternLength.ro OCTET STRING .1.3.6.1.4.1.2272.1.202.1.1.2.4.28.1.4 |
rcPrFilterAcePatternShowPattern1OperOperators for Ace Pattern.ro Enumeration .1.3.6.1.4.1.2272.1.202.1.1.2.4.28.1.5 |
rcPrFilterAcePatternShowPattern2NameA descriptive name chosen by the administrator for
the Ace Pattern Entry.ro DisplayString .1.3.6.1.4.1.2272.1.202.1.1.2.4.28.1.6 |
rcPrFilterAcePatternShowPattern2ValueSet the pattern value as numeric string. The numeric
value of each byte is encoded in one octet of the
string. Unused bytes are left at the trailing end of
string. The number of bytes to extract from this string
is set in rcPrFilterActPatternLength.ro OCTET STRING .1.3.6.1.4.1.2272.1.202.1.1.2.4.28.1.7 |
rcPrFilterAcePatternShowPattern2OperOperators for Ace Pattern.ro Enumeration .1.3.6.1.4.1.2272.1.202.1.1.2.4.28.1.8 |
rcPrFilterAcePatternShowPattern3NameA descriptive name chosen by the administrator for
the Ace Pattern Entry.ro DisplayString .1.3.6.1.4.1.2272.1.202.1.1.2.4.28.1.9 |
rcPrFilterAcePatternShowPattern3ValueSet the pattern value as numeric string. The numeric
value of each byte is encoded in one octet of the
string. Unused bytes are left at the trailing end of
string. The number of bytes to extract from this string
is set in rcPrFilterActPatternLength.ro OCTET STRING .1.3.6.1.4.1.2272.1.202.1.1.2.4.28.1.10 |
rcPrFilterAcePatternShowPattern3OperOperators for Ace Pattern.ro Enumeration .1.3.6.1.4.1.2272.1.202.1.1.2.4.28.1.11 |
rcPrFilterAceIpv6SrcAddrTableA table of Aces to store IPv6 Source Address Header
information of each Ace in context of its parent Acl. SEQUENCE OF RcPrFilterAceIpv6SrcAddrEntry .1.3.6.1.4.1.2272.1.202.1.1.2.4.29 |
rcPrFilterAceIpv6SrcAddrEntryOne Ace entry holding Ace IPv6 Source Address Header
information. An Ace is a member of one Acl. RcPrFilterAceIpv6SrcAddrEntry .1.3.6.1.4.1.2272.1.202.1.1.2.4.29.1 |
rcPrFilterAceIpv6SrcAddrAclIdAn index to the AceIpv6SrcAddrEntry, a unique
identifier for Acl entry in the range of Table
Size.ro INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.4.29.1.1 |
rcPrFilterAceIpv6SrcAddrAceIdAn index to the AceIpv6SrcAddrEntry, a unique
identifier for Acl entry in the range of Table
Size.ro INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.4.29.1.2 |
rcPrFilterAceIpv6SrcAddrListThe list of ipv6 source address to match from IPv6
header.rw OCTET STRING .1.3.6.1.4.1.2272.1.202.1.1.2.4.29.1.3 |
rcPrFilterAceIpv6SrcAddrListCountCount to store the number of discrete ranges
entered for the ipv6 src address.rw INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.4.29.1.4 |
rcPrFilterAceIpv6SrcAddrOperOperators for Ace Ipv6 Source Address.rw Enumeration .1.3.6.1.4.1.2272.1.202.1.1.2.4.29.1.5 |
rcPrFilterAceIpv6SrcAddrRowStatusCreate/delete operations for this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.202.1.1.2.4.29.1.6 |
rcPrFilterAceIpv6DstAddrTableA table of Aces to store IPv6 Destination Address
Header information of each Ace in context of its
parent Acl. SEQUENCE OF RcPrFilterAceIpv6DstAddrEntry .1.3.6.1.4.1.2272.1.202.1.1.2.4.30 |
rcPrFilterAceIpv6DstAddrEntryOne Ace entry holding Ace IPv6 Destination Address
Header information. An Ace is a member of one Acl. RcPrFilterAceIpv6DstAddrEntry .1.3.6.1.4.1.2272.1.202.1.1.2.4.30.1 |
rcPrFilterAceIpv6DstAddrAclIdAn index to the AceIpv6DstAddrEntry, a unique
identifier for Acl entry in the range of Table
Size.ro INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.4.30.1.1 |
rcPrFilterAceIpv6DstAddrAceIdAn index to the AceIpv6DstAddrEntry, a unique
identifier for Acl entry in the range of Table
Size.ro INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.4.30.1.2 |
rcPrFilterAceIpv6DstAddrListThe list of ipv6 dst address to match from IPv6 header.rw OCTET STRING .1.3.6.1.4.1.2272.1.202.1.1.2.4.30.1.3 |
rcPrFilterAceIpv6DstAddrListCountCount to store the number of discrete ranges
entered for the IPv6 Destination Address.rw INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.4.30.1.4 |
rcPrFilterAceIpv6DstAddrOperOperators for Ace IPv6 Destination Address.rw Enumeration .1.3.6.1.4.1.2272.1.202.1.1.2.4.30.1.5 |
rcPrFilterAceIpv6DstAddrRowStatusCreate/delete operations for this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.202.1.1.2.4.30.1.6 |
rcPrFilterAceIpv6NextHdrTableA table of Aces to store IPv6 Next header
Header information of each Ace in context of its
parent Acl. SEQUENCE OF RcPrFilterAceIpv6NextHdrEntry .1.3.6.1.4.1.2272.1.202.1.1.2.4.31 |
rcPrFilterAceIpv6NextHdrEntryOne Ace entry holding Ace IPv6 Next header
information. An Ace is a member of one Acl. RcPrFilterAceIpv6NextHdrEntry .1.3.6.1.4.1.2272.1.202.1.1.2.4.31.1 |
rcPrFilterAceIpv6NextHdrAclIdAn index to the AceIpv6NextHdrEntry, a unique
identifier for Acl entry in the range of Table
Size.ro INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.4.31.1.1 |
rcPrFilterAceIpv6NextHdrAceIdAn index to the AceIpv6NextHdrEntry, a unique
identifier for Acl entry in the range of Table
Size.ro INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.4.31.1.2 |
rcPrFilterAceIpv6NextHdrNextHdrThe ipv6 next header to look for.rw Ipv6NextHdr .1.3.6.1.4.1.2272.1.202.1.1.2.4.31.1.3 |
rcPrFilterAceIpv6NextHdrOperOperators for Ace IPv6 Next header.rw Enumeration .1.3.6.1.4.1.2272.1.202.1.1.2.4.31.1.4 |
rcPrFilterAceIpv6NextHdrRowStatusCreate/delete operations for this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.202.1.1.2.4.31.1.5 |
rcPrFilterAceIpv6ShowTableA table of Aces to display ipv6
information of each Ace in context of
its parent Acl. SEQUENCE OF RcPrFilterAceIpv6ShowEntry .1.3.6.1.4.1.2272.1.202.1.1.2.4.32 |
rcPrFilterAceIpv6ShowEntryOne Ace entry holding Ace ipv6 information.
Ace is a member of one Acl. RcPrFilterAceIpv6ShowEntry .1.3.6.1.4.1.2272.1.202.1.1.2.4.32.1 |
rcPrFilterAceIpv6ShowAclIdAn index to the AceIpv6Entry, a unique
identifier for Acl entry in the range of Table
Size.ro INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.4.32.1.1 |
rcPrFilterAceIpv6ShowAceIdAn index to the AceIpv6Entry, a unique
identifier for Acl entry in the range of Table
Size.ro INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.4.32.1.2 |
rcPrFilterAceIpv6ShowSrcAddrListThe list of v6 source address to display.ro OCTET STRING .1.3.6.1.4.1.2272.1.202.1.1.2.4.32.1.3 |
rcPrFilterAceIpv6ShowSrcAddrOperOperators for Ace v6 Source Address.ro Enumeration .1.3.6.1.4.1.2272.1.202.1.1.2.4.32.1.4 |
rcPrFilterAceIpv6ShowDstAddrListList of v6 destination address to display.ro OCTET STRING .1.3.6.1.4.1.2272.1.202.1.1.2.4.32.1.5 |
rcPrFilterAceIpv6ShowDstAddrOperOperators for Ace v6 Destination Address.ro Enumeration .1.3.6.1.4.1.2272.1.202.1.1.2.4.32.1.6 |
rcPrFilterAceIpv6ShowNxtHdrNxtHdrv6 next hdr to display.ro Ipv6NextHdr .1.3.6.1.4.1.2272.1.202.1.1.2.4.32.1.7 |
rcPrFilterAceIpv6ShowNxtHdrOperOperator for Ace v6 next hdr.ro Enumeration .1.3.6.1.4.1.2272.1.202.1.1.2.4.32.1.8 |
rcPrFilterAceProtoSrcPortTableA table of Aces to store TCP/UDP Source Port information
of each Ace in context of its parent Acl. SEQUENCE OF RcPrFilterAceProtoSrcPortEntry .1.3.6.1.4.1.2272.1.202.1.1.2.4.33 |
rcPrFilterAceProtoSrcPortEntryOne entry holding Ace Protocol TCP/UDP Source Port
information. An Ace is a member of one Acl. RcPrFilterAceProtoSrcPortEntry .1.3.6.1.4.1.2272.1.202.1.1.2.4.33.1 |
rcPrFilterAceProtoSrcPortAclIdAn index to the AceProtoSrcPortEntry, a unique
identifier for Acl entry in the range of Table
Size.ro INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.4.33.1.1 |
rcPrFilterAceProtoSrcPortAceIdAn index to the AceProtoSrcPortEntry, a unique
identifier for Ace entry in the range of Table
Size.ro INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.4.33.1.2 |
rcPrFilterAceProtoSrcPortPortPort Number or Port List to match on.rw OCTET STRING .1.3.6.1.4.1.2272.1.202.1.1.2.4.33.1.3 |
rcPrFilterAceProtoSrcPortCountCount to store the number of discrete ranges
entered for the TCP source port.rw INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.4.33.1.4 |
rcPrFilterAceProtoSrcPortOperOperator for Ace Protocol SrcPort.rw Enumeration .1.3.6.1.4.1.2272.1.202.1.1.2.4.33.1.5 |
rcPrFilterAceProtoSrcPortRowStatusCreate/delete operations for this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.202.1.1.2.4.33.1.6 |
rcPrFilterAceProtoSrcPortOperMaskRangeThe value should be displayed in hex when
rcPrFilterAceProtoSrcPortOper is set to 'mask'.
This object will be used as a Range high value when
rcPrFilterAceProtoSrcPortOper is set to 'range'.
('range' is not supported in this 3.0 release).
If it is used as range high value, it should be
displayed in decimal formtat.
This object will be set to 0 when
rcPrFilterAceProtoSrcPortOper is set to 'eq'rw Integer32(0..'FFFF'h) .1.3.6.1.4.1.2272.1.202.1.1.2.4.33.1.7 |
rcPrFilterAceProtoDstPortTableA table of Aces to store TCP Dest Port information
of each Ace in context of its parent Acl. SEQUENCE OF RcPrFilterAceProtoDstPortEntry .1.3.6.1.4.1.2272.1.202.1.1.2.4.34 |
rcPrFilterAceProtoDstPortEntryOne entry holding Ace Protocol TCP Dest Port
information. An Ace is a member of one Acl. RcPrFilterAceProtoDstPortEntry .1.3.6.1.4.1.2272.1.202.1.1.2.4.34.1 |
rcPrFilterAceProtoDstPortAclIdAn index to the AceProtoDstPortEntry, a unique
identifier for Acl entry in the range of Table
Size.ro INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.4.34.1.1 |
rcPrFilterAceProtoDstPortAceIdAn index to the AceProtoDstPortEntry, a unique
identifier for Ace entry in the range of Table
Size.ro INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.4.34.1.2 |
rcPrFilterAceProtoDstPortPortPort Number or Port List to match on.rw OCTET STRING .1.3.6.1.4.1.2272.1.202.1.1.2.4.34.1.3 |
rcPrFilterAceProtoDstPortCountCount to store the number of discrete ranges
entered for the TCP dest port.rw INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.4.34.1.4 |
rcPrFilterAceProtoDstPortOperOperator for Ace Protocol DstPort.rw Enumeration .1.3.6.1.4.1.2272.1.202.1.1.2.4.34.1.5 |
rcPrFilterAceProtoDstPortRowStatusCreate/delete operations for this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.202.1.1.2.4.34.1.6 |
rcPrFilterAceProtoDstPortOperMaskRangeThe value should be displayed in hex when
rcPrFilterAceProtoDstPortOper is set to 'mask'.
This object will be used as a Range high value when
rcPrFilterAceProtoDstPortOper is set to 'range'.
('range' is not supported in this 3.0 release).
If it is used as range high value, it should be
displayed in decimal formtat.
This object will be set to 0 when
rcPrFilterAceProtoDstPortOper is set to 'eq'rw Integer32(0..'FFFF'h) .1.3.6.1.4.1.2272.1.202.1.1.2.4.34.1.7 |
rcPrFilterAceProtoTcpOptionTableA table of Aces to store TCP Option information
of each Ace in context of its parent Acl. SEQUENCE OF RcPrFilterAceProtoTcpOptionEntry .1.3.6.1.4.1.2272.1.202.1.1.2.4.35 |
rcPrFilterAceProtoTcpOptionEntryOne entry holding Ace Protocol TCP option
information. An Ace is a member of one Acl. RcPrFilterAceProtoTcpOptionEntry .1.3.6.1.4.1.2272.1.202.1.1.2.4.35.1 |
rcPrFilterAceProtoTcpOptionAclIdAn index to the rcPrFilterAceProtoTcpOptionEntry,
a unique identifier for Acl entry in the range of Table
Size.ro INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.4.35.1.1 |
rcPrFilterAceProtoTcpOptionAceIdAn index to the rcPrFilterAceProtoTcpOptionEntry,
a unique identifier for Ace entry in the
range of Table Size.ro INTEGER .1.3.6.1.4.1.2272.1.202.1.1.2.4.35.1.2 |
rcPrFilterAceProtoTcpOptionHeaderTCP options to be matched from the TCP Header.
1 No-Operation
2 MaximumSegmentSize
3 WSOPT - Window Scale
4 SACK Permitted
5 SACK
8 TSOPT - Time Stamp Option
9 Partial Order Connection Permitted
10 Partial Order Service Profile
11 CC
12 CC.NEW
13 CC.ECHO
14 TCP Alternate Checksum Request
15 TCP Alternate Checksum Data
19 MD5 Signature Option
27 Quick-Start Response
28 User Timeout Optionrw Enumeration .1.3.6.1.4.1.2272.1.202.1.1.2.4.35.1.3 |
rcPrFilterAceProtoTcpOptionOperLogical Operator - only 'any' is valid at present.rw Enumeration .1.3.6.1.4.1.2272.1.202.1.1.2.4.35.1.4 |
rcPrFilterAceProtoTcpOptionRowStatusCreate/delete operations for this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.202.1.1.2.4.35.1.5 |
rcVrf OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.203 |
rcVrfMib OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.203.1 |
rcVrfNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.203.1.0 |
rcVrfObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.203.1.1 |
rcVrfConfig OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.203.1.1.1 |
rcVrfConfigScalars OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.203.1.1.1.1 |
rcVrfConfigNextAvailableVrfIdThe next available Virtual Router Id (index).
This object provides a hint for the rcVrfId value
to use when administratively creating a new
rcVrfConfigEntry.
A GET of this object returns the next available rcVrfId
value to be used to create an entry in the associated
rcVrfConfigTable; or zero, if no valid rcVrfId
value is available. A value of zero(0) indicates that
it is not possible to create a new rcVrfConfigEntry.
This object also returns a value of zero when it is the
lexicographic successor of a varbind presented in an
SNMP GETNEXT or GETBULK request, for which circumstance
it is assumed that ifIndex allocation is unintended.
Successive GETs will typically return different
values, thus avoiding collisions among cooperating
management clients seeking to create table entries
simultaneously.
Unless specified otherwise by its MAX-ACCESS and
DESCRIPTION clauses, an object of this type is read-only,
and a SET of such an object returns a notWritable error.ro VrfIdentifier .1.3.6.1.4.1.2272.1.203.1.1.1.1.1 |
rcVrfConfigTableThis table is for creating the new Virtual Routers. SEQUENCE OF RcVrfConfigEntry .1.3.6.1.4.1.2272.1.203.1.1.1.2 |
rcVrfConfigEntryThe entries in this table can be added/deleted
using the rcVrfRowStatus. RcVrfConfigEntry .1.3.6.1.4.1.2272.1.203.1.1.1.2.1 |
rcVrfIdThe unique id of this virtual router instance. A Virtual
Router cannot not be created with rcVrfId = 0.
VRFID 0 is reserved for the Administrative VRF. VrfIdentifier .1.3.6.1.4.1.2272.1.203.1.1.1.2.1.1 |
rcVrfRowStatusThe status column has three defined values:
- `active', which indicates that the conceptual row is
available for use by the managed device;
- `createAndGo', which is supplied by a management
station wishing to create a new instance of a
conceptual row and to have its status automatically set
to active, making it available for use by the managed
device;
- `destroy', which is supplied by a management station
wishing to delete all of the instances associated with
an existing conceptual row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.203.1.1.1.2.1.2 |
rcVrfNameThe Name of the Virtual Router.rw DisplayString .1.3.6.1.4.1.2272.1.203.1.1.1.2.1.3 |
rcVrfContextNameThe SNMPv2 Community String or SNMPv3 contextName
denotes the VRF 'context' and is used to logically
separate the MIB module management.rw SnmpAdminString .1.3.6.1.4.1.2272.1.203.1.1.1.2.1.4 |
rcVrfTrapEnableThis objects is used to enable the generation
of the VrfUp and VrfDown traps.
true(1) - VRF Traps Enabled
false(2) - VRF Traps Disabledrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.203.1.1.1.2.1.5 |
rcVrfMaxRoutesThis object specifies the maximum number of routes that
this VRF can support. The default value is 10000.rw Unsigned32 .1.3.6.1.4.1.2272.1.203.1.1.1.2.1.6 |
rcVrfAdminStatusThe administrative state of the Virtual Router.rw Enumeration .1.3.6.1.4.1.2272.1.203.1.1.1.2.1.7 |
rcVrfVpnIdThe Virtual Private Network Identifier of the Virtual
Router.rw VPNId .1.3.6.1.4.1.2272.1.203.1.1.1.2.1.8 |
rcVrfRpTriggerThis object represents Routing Protocol (RP)
Triggers on a Virtual Router and it meant to
be used to initiate or shutdown routing
protocols on a VRF. Multiple RPs can be acted
on simultaneously. Also, individual RPs can
be brought up in steps, which should not
affect the RPs that were running. The BITS
represent an Action-code that specifies what
action is to be performed for the RPs.
The actions are: initiate(1) or shutdown(0).
The running status of an RP shall be available
in the VRF stats table's rcVrfRpStatus, which has
a similar format, but represents the status.
Bits 0-3 may be specified in any combination.
Individual routing protocols may be enabled
and disabled independently. Protocols are
enabled by setting the respective BIT and are
disabled by resetting the BIT.
So, for example, to enable RIP and BGP protocols
the rcVrfRpTrigger bits 0 and 2 need to be set, and
as encoded as 10100000.
All zeros should be interpreted as all protocols
disable.rw VrfRpTriggerBitCode .1.3.6.1.4.1.2272.1.203.1.1.1.2.1.9 |
rcVrfMaxRoutesTrapEnableThis objects is used to enable the generation
of the VRF Max Routes Exceeded traps.
true(1) - VRF Max Routes Exceeded Traps Enabled
false(2) - VRF Max Routes Exceeded Traps Disabledrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.203.1.1.1.2.1.10 |
rcVrfStat OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.203.1.1.2 |
rcVrfStatScalars OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.203.1.1.2.1 |
rcVrfConfiguredVRFsThe number of VRFs configured on this network element.ro Unsigned32 .1.3.6.1.4.1.2272.1.203.1.1.2.1.1 |
rcVrfActiveVRFsThe number of VRFs that are active on the network element.
These are VRFs for which the
rcVrfStatOperStatus = up(1)ro Unsigned32 .1.3.6.1.4.1.2272.1.203.1.1.2.1.2 |
rcVrfStatTableThis table contains statistics for the Virtual Router. SEQUENCE OF RcVrfStatEntry .1.3.6.1.4.1.2272.1.203.1.1.2.2 |
rcVrfStatEntryEntries in this table are per rcVrfId. RcVrfStatEntry .1.3.6.1.4.1.2272.1.203.1.1.2.2.1 |
rcVrfStatRouteEntriesTotal number of routes for this VRF.ro Unsigned32 .1.3.6.1.4.1.2272.1.203.1.1.2.2.1.1 |
rcVrfStatFIBEntriesTotal number of FIB Entries for this VRF.ro Unsigned32 .1.3.6.1.4.1.2272.1.203.1.1.2.2.1.2 |
rcVrfStatUpTimeThe time in (in hundredths of a second) since
this VRF entry has been operational.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2272.1.203.1.1.2.2.1.3 |
rcVrfOperStatusThe operational status of the Virtual Router.ro Enumeration .1.3.6.1.4.1.2272.1.203.1.1.2.2.1.4 |
rcVrfRpStatusThis object represents the status of Routing
Protocols on this VRF corresponding to the list
of RP specified in rcVrfRpTrigger.
The BITS represent an Action-code that specifies
the status of the RPs.
The status are: initiated (1) or shutdown (0).
Initiated status is indicated when the respective
BIT value is 1 and indicates shutdown when the
respective BIT value is 0.
Bits 0-3 may appear in any combination to
indicate that RPs may be enabled and disabled
independently or that multiple RP are acted on
simultaneously.ro VrfRpTriggerBitCode .1.3.6.1.4.1.2272.1.203.1.1.2.2.1.5 |
rcVrfRouterAddressTypeRouter Address Type of this VRF.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2272.1.203.1.1.2.2.1.6 |
rcVrfRouterAddressRouter Address of this VRF. It is derived from one of the
interfaces. If loopback interface is present, the loopback
interface address can be used. However, loopback interface
is optional.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2272.1.203.1.1.2.2.1.7 |
rcVrfIpVpnTableSizeSize of Vrf IpVpn Tablero Integer32 .1.3.6.1.4.1.2272.1.203.1.1.3 |
rcVrfIpVpnTableTable required to configure vpn under ip. SEQUENCE OF RcVrfIpVpnTableEntry .1.3.6.1.4.1.2272.1.203.1.1.4 |
rcVrfIpVpnTableEntryEntries in this table are per rcVrfId. RcVrfIpVpnTableEntry .1.3.6.1.4.1.2272.1.203.1.1.4.1 |
rcVrfIpVpnVrfIdThe VrfId serves as the Index for the rcIpVpnVrfTable and
also for the rcIpVpnRouteDistinguisherTable. It allows to
connect to the vrf table to obtain other attributes like the
vrf name, rcVrfMaxRoutesTrapEnable etc. VrfIdentifier .1.3.6.1.4.1.2272.1.203.1.1.4.1.1 |
rcVrfIpVpnStatusThe status of IpVpn.rw EnableValue .1.3.6.1.4.1.2272.1.203.1.1.4.1.2 |
rcVrfIpVpnImportRTListThe Import RT list is a list of all the route-targets
attached to a particular vrf behaving in the import mode.rw IdList .1.3.6.1.4.1.2272.1.203.1.1.4.1.3 |
rcVrfIpVpnExportRTListThe Export RT list is a list of all the route-targets
attached to a particular vrf in the export mode.rw IdList .1.3.6.1.4.1.2272.1.203.1.1.4.1.4 |
rcVrfIpVpnSvcLblAllocOptThe service label allocation option for the ipvpnrw Enumeration .1.3.6.1.4.1.2272.1.203.1.1.4.1.5 |
rcVrfIpVpnRowStatusRowStatus for the Vpn Entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.203.1.1.4.1.6 |
rcVrfIpVpnIsidNumberIP VPN I-SID number.Default 0 value indicates
that no i-sid has been assinged.rw Integer32 .1.3.6.1.4.1.2272.1.203.1.1.4.1.7 |
rcVrfNameTableThis table is for EDM and SNMP agent to get source vrf name
for inter-vrf route redistribute. SEQUENCE OF RcVrfNameEntry .1.3.6.1.4.1.2272.1.203.1.1.5 |
rcVrfNameEntryEach entry has the vrfid and name for source vrf needed by
inter-vrf route redistribute. RcVrfNameEntry .1.3.6.1.4.1.2272.1.203.1.1.5.1 |
rcVrfNameVrfIdThe unique id of this virtual router instance. VrfIdentifier .1.3.6.1.4.1.2272.1.203.1.1.5.1.1 |
rcVrfNameVrfNameThe Name of the Virtual Router.ro DisplayString .1.3.6.1.4.1.2272.1.203.1.1.5.1.2 |
rcVrfNotificationObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.203.1.2 |
rcCobaltBlue OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.204 |
rcCobaltBlueMib OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.204.1 |
rcCbNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.204.1.0 |
rcLoginUserNameUsed to inidcation the login user name for notificationro DisplayString .1.3.6.1.4.1.2272.1.204.1.0.1 |
rcLoginHostIpAddressUsed to inidcation the login host ip address for
notificationro IpAddress .1.3.6.1.4.1.2272.1.204.1.0.2 |
rcSlotTypeUsed to inidcate the slot typero Enumeration .1.3.6.1.4.1.2272.1.204.1.0.3 |
rcFanZoneTypeType of the fan zone.ro Enumeration .1.3.6.1.4.1.2272.1.204.1.0.4 |
rcFanTrayIdFan tray number in the fan zonero INTEGER .1.3.6.1.4.1.2272.1.204.1.0.5 |
rcFanUnitIdFan unit number in the fan trayro INTEGER .1.3.6.1.4.1.2272.1.204.1.0.6 |
rcCardTempUsed to inidcate the card temperaturero Integer32 .1.3.6.1.4.1.2272.1.204.1.0.7 |
rcCpuUtilizationUsed to inidcate the CPU utilizationro Unsigned32 .1.3.6.1.4.1.2272.1.204.1.0.8 |
rcLoginHostAddressTypeUsed to inidcation the login host address type for
notificationro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2272.1.204.1.0.9 |
rcLoginHostInetAddressUsed to inidcation the login host inet address for
notificationro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2272.1.204.1.0.10 |
rcCbObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.204.1.1 |
rcCbSwitchFabric OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.204.1.1.1 |
rcCbSwitchFabricScalars OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.204.1.1.1.1 |
rcCbSwitchFabricStats OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.204.1.1.1.1.1 |
rcCbSwitchFabricDropPrec1AcceptedPacketsAccepted number of packets from drop precedence 1. The drop precedence is a function of the front end policer.ro Counter64 .1.3.6.1.4.1.2272.1.204.1.1.1.1.1.1 |
rcCbSwitchFabricDropPrec1AcceptedBytesAccepted number of bytes from drop precedence 1ro Counter64 .1.3.6.1.4.1.2272.1.204.1.1.1.1.1.2 |
rcCbSwitchFabricDropPrec1CongestionMarkedPacketsCongestion marked number of packets from drop precedence 1.ro Counter64 .1.3.6.1.4.1.2272.1.204.1.1.1.1.1.3 |
rcCbSwitchFabricDropPrec1CongestionMarkedBytesCongestion marked number of bytes from drop precedence 1.ro Counter64 .1.3.6.1.4.1.2272.1.204.1.1.1.1.1.4 |
rcCbSwitchFabricDropPrec1DiscardDroppedPacketsWRED dropped number of packets from drop precedence 1.ro Counter64 .1.3.6.1.4.1.2272.1.204.1.1.1.1.1.5 |
rcCbSwitchFabricDropPrec1DiscardDroppedBytesWRED dropped number of bytes from drop precedence 1.ro Counter64 .1.3.6.1.4.1.2272.1.204.1.1.1.1.1.6 |
rcCbSwitchFabricDropPrec2AcceptedPacketsAccepted number of packets from drop precedence 2ro Counter64 .1.3.6.1.4.1.2272.1.204.1.1.1.1.1.7 |
rcCbSwitchFabricDropPrec2AcceptedBytesAccepted number of bytes from drop precedence 2ro Counter64 .1.3.6.1.4.1.2272.1.204.1.1.1.1.1.8 |
rcCbSwitchFabricDropPrec2CongestionMarkedPacketsCongestion marked number of packets from drop precedence 2.ro Counter64 .1.3.6.1.4.1.2272.1.204.1.1.1.1.1.9 |
rcCbSwitchFabricDropPrec2CongestionMarkedBytesCongestion marked number of bytes from drop precedence 2.ro Counter64 .1.3.6.1.4.1.2272.1.204.1.1.1.1.1.10 |
rcCbSwitchFabricDropPrec2DiscardDroppedPacketsWRED dropped number of packets from drop precedence 2.ro Counter64 .1.3.6.1.4.1.2272.1.204.1.1.1.1.1.11 |
rcCbSwitchFabricDropPrec2DiscardDroppedBytesWRED dropped number of bytes from drop precedence 2.ro Counter64 .1.3.6.1.4.1.2272.1.204.1.1.1.1.1.12 |
rcCbSwitchFabricDropPrec3AcceptedPacketsAccepted number of packets from drop precedence 3ro Counter64 .1.3.6.1.4.1.2272.1.204.1.1.1.1.1.13 |
rcCbSwitchFabricDropPrec3AcceptedBytesAccepted number of bytes from drop precedence 3ro Counter64 .1.3.6.1.4.1.2272.1.204.1.1.1.1.1.14 |
rcCbSwitchFabricDropPrec3CongestionMarkedPacketsCongestion marked number of packets from drop precedence 3.ro Counter64 .1.3.6.1.4.1.2272.1.204.1.1.1.1.1.15 |
rcCbSwitchFabricDropPrec3CongestionMarkedBytesCongestion marked number of bytes from drop precedence 3.ro Counter64 .1.3.6.1.4.1.2272.1.204.1.1.1.1.1.16 |
rcCbSwitchFabricDropPrec3DiscardDroppedPacketsWRED dropped number of packets from drop precedence 3.ro Counter64 .1.3.6.1.4.1.2272.1.204.1.1.1.1.1.17 |
rcCbSwitchFabricDropPrec3DiscardDroppedBytesWRED dropped number of bytes from drop precedence 3.ro Counter64 .1.3.6.1.4.1.2272.1.204.1.1.1.1.1.18 |
rcCbSwitchFabricDropPrec4AcceptedPacketsAccepted number of packets from drop precedence 4ro Counter64 .1.3.6.1.4.1.2272.1.204.1.1.1.1.1.19 |
rcCbSwitchFabricDropPrec4AcceptedBytesAccepted number of bytes from drop precedence 4ro Counter64 .1.3.6.1.4.1.2272.1.204.1.1.1.1.1.20 |
rcCbSwitchFabricNonWredDroppedPacketsDropped packets due to non Random Early Detectionro Counter64 .1.3.6.1.4.1.2272.1.204.1.1.1.1.1.21 |
rcCbSwitchFabricNonWredDroppedBytesDropped packets bytes due to non Random Early Detectionro Counter64 .1.3.6.1.4.1.2272.1.204.1.1.1.1.1.22 |
rcCbSwitchFabricDequeuedPacketsPackets dequeued once inside the switch fabricro Counter64 .1.3.6.1.4.1.2272.1.204.1.1.1.1.1.23 |
rcCbSwitchFabricDequeuedBytesPackets bytes dequeued once inside the switch fabricro Counter64 .1.3.6.1.4.1.2272.1.204.1.1.1.1.1.24 |
rcCbSwitchFabricDropPrec1DroppedPacketsnon-WRED dropped number of packets from drop precedence 1.ro Counter64 .1.3.6.1.4.1.2272.1.204.1.1.1.1.1.25 |
rcCbSwitchFabricDropPrec1DroppedBytesnon-WRED dropped number of bytes from drop precedence 1.ro Counter64 .1.3.6.1.4.1.2272.1.204.1.1.1.1.1.26 |
rcCbSwitchFabricDropPrec2DroppedPacketsnon-WRED dropped number of packets from drop precedence 2.ro Counter64 .1.3.6.1.4.1.2272.1.204.1.1.1.1.1.27 |
rcCbSwitchFabricDropPrec2DroppedBytesnon-WRED dropped number of bytes from drop precedence 2.ro Counter64 .1.3.6.1.4.1.2272.1.204.1.1.1.1.1.28 |
rcCbSwitchFabricDropPrec3DroppedPacketsnon-WRED dropped number of packets from drop precedence 3.ro Counter64 .1.3.6.1.4.1.2272.1.204.1.1.1.1.1.29 |
rcCbSwitchFabricDropPrec3DroppedBytesnon-WRED dropped number of bytes from drop precedence 3.ro Counter64 .1.3.6.1.4.1.2272.1.204.1.1.1.1.1.30 |
rcCbSwitchFabricDropPrec4CongestionMarkedPacketsCongestion marked number of packets from drop precedence 4.ro Counter64 .1.3.6.1.4.1.2272.1.204.1.1.1.1.1.31 |
rcCbSwitchFabricDropPrec4CongestionMarkedBytesCongestion marked number of bytes from drop precedence 4.ro Counter64 .1.3.6.1.4.1.2272.1.204.1.1.1.1.1.32 |
rcCbSwitchFabricDropPrec4DiscardDroppedPacketsWRED dropped number of packets from drop precedence 4.ro Counter64 .1.3.6.1.4.1.2272.1.204.1.1.1.1.1.33 |
rcCbSwitchFabricDropPrec4DiscardDroppedBytesWRED dropped number of bytes from drop precedence 4.ro Counter64 .1.3.6.1.4.1.2272.1.204.1.1.1.1.1.34 |
rcCbSwitchFabricDropPrec4DroppedPacketsnon-WRED dropped number of packets from drop precedence 4.ro Counter64 .1.3.6.1.4.1.2272.1.204.1.1.1.1.1.35 |
rcCbSwitchFabricDropPrec4DroppedBytesnon-WRED dropped number of bytes from drop precedence 4.ro Counter64 .1.3.6.1.4.1.2272.1.204.1.1.1.1.1.36 |
rcCbSwitchFabricOverSubscribeTotalDroppedPktsDropped number of packets due to free list underflow.ro Counter64 .1.3.6.1.4.1.2272.1.204.1.1.1.1.1.37 |
rcCbSwitchFabricOverSubscribeTotalDroppedBytesDropped number of bytes due to free list underflow.ro Counter64 .1.3.6.1.4.1.2272.1.204.1.1.1.1.1.38 |
rcCbSwitchFabricOverSubscribeGuaranteeDroppedPktsDropped number of packets Gbl buf thres guarantee.ro Counter64 .1.3.6.1.4.1.2272.1.204.1.1.1.1.1.39 |
rcCbSwitchFabricOverSubscribeGuaranteeDroppedBytesDropped number of bytes Gbl buf thres guarantee.ro Counter64 .1.3.6.1.4.1.2272.1.204.1.1.1.1.1.40 |
rcCbSwitchFabricOutPktsNumber of packets out from egress interface.ro Counter64 .1.3.6.1.4.1.2272.1.204.1.1.1.1.1.41 |
rcCbSwitchFabricOutBytesNumber of bytes out from egress interface.ro Counter64 .1.3.6.1.4.1.2272.1.204.1.1.1.1.1.42 |
rcCbSwitchFabricStatsCaptureControl to turn stats collection on or offrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.204.1.1.1.1.2 |
rcCbSwitchFabricStatsPortIdThe port on which stats is to be collected on.
Must select a data port.rw InterfaceIndex .1.3.6.1.4.1.2272.1.204.1.1.1.1.3 |
rcCbSwitchFabricStatsCosIdThe CoS or VOQ to collect Stats onrw Integer32 .1.3.6.1.4.1.2272.1.204.1.1.1.1.4 |
rcCbBmeActiveBmeThe location of the active BME in the system.
BME stands for Bandwidth Manager Engine.ro Enumeration .1.3.6.1.4.1.2272.1.204.1.1.1.1.5 |
rcCbBmeRedundancyModeRedundancy mode for BMEs.ro Enumeration .1.3.6.1.4.1.2272.1.204.1.1.1.1.6 |
rcCbProfileTypeSwitch fabric profile type.rw Enumeration .1.3.6.1.4.1.2272.1.204.1.1.1.1.7 |
rcCbSwitchFabricDeviceReadIf turned on statistics for switch fabric counters
are collected directly from devices. Otherwise,
a cached copy is returned.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.204.1.1.1.1.8 |
rcCbQueuingEngine2kTableTable containing the 2k based queuing engine
entries for the system. SEQUENCE OF RcCBQueuingEngine2kEntry .1.3.6.1.4.1.2272.1.204.1.1.1.2 |
rcCbQueuingEngine2kEntryEntry for the QE Table RcCBQueuingEngine2kEntry .1.3.6.1.4.1.2272.1.204.1.1.1.2.1 |
rcCbQueuingEngine2kIdIndex for an entry in the QE Table. Here is the layout
of the IDs in relation to the system:
Location ID(s)
-
IO on slot 3: 1..3
IO on slot 4: 4..6
CP on slot 1: 7
CP on slot 2: 8
IO on slot 5: 9..11
IO on slot 6: 12..14
...
IO on slot 12: 30..32 Integer32 .1.3.6.1.4.1.2272.1.204.1.1.1.2.1.1 |
rcCbQueuingEngine2kStatusStatus of a given QE interface.ro DeviceStatus .1.3.6.1.4.1.2272.1.204.1.1.1.2.1.2 |
rcCbSwitchingEngine4kTableTable containing the 4k based switching
engine entries for the system. SEQUENCE OF RcCBSwitchingEngine4kEntry .1.3.6.1.4.1.2272.1.204.1.1.1.3 |
rcCbSwitchingEngine4kEntryEntry for the SE Table. RcCBSwitchingEngine4kEntry .1.3.6.1.4.1.2272.1.204.1.1.1.3.1 |
rcCbSwitchingEngine4kIdIndex for the SE Table. Here is the layout
of the IDs in relation to the system:
Location ID(s)
-
SF on slot 13: 1..3
SF on slot 14: 4..6
...
SF on slot 18: 16..18 Integer32 .1.3.6.1.4.1.2272.1.204.1.1.1.3.1.1 |
rcCbSwitchingEngine4kStatusStatus of a given SE Device.ro DeviceStatus .1.3.6.1.4.1.2272.1.204.1.1.1.3.1.2 |
rcCbSwitchingEngine9600TableTable containing the 9600 based switching
engine entries for the system. SEQUENCE OF RcCBSwitchingEngine9600Entry .1.3.6.1.4.1.2272.1.204.1.1.1.4 |
rcCbSwitchingEngine9600EntryEntry for the SE 9600 Table. RcCBSwitchingEngine9600Entry .1.3.6.1.4.1.2272.1.204.1.1.1.4.1 |
rcCbSwitchingEngine9600IdIndex for the SE Table. Here is the layout
of the IDs in relation to the system:
Location ID(s)
-
SF on slot 21: 1..2
SF on slot 22: 3..4
...
SF on slot 26: 11..12 Integer32 .1.3.6.1.4.1.2272.1.204.1.1.1.4.1.1 |
rcCbSwitchingEngine9600StatusStatus of a given Fast SE Device.ro DeviceStatus .1.3.6.1.4.1.2272.1.204.1.1.1.4.1.2 |
rcCbSwitchingEngine9600ModeMode of given Fast SE Device either BME or SE.ro SfDeviceMode .1.3.6.1.4.1.2272.1.204.1.1.1.4.1.3 |
rcCbQe2kSerdesLinkTableTable containing the Serdes Link Information
for the system. SEQUENCE OF RcCbQe2kSerdesLinkEntry .1.3.6.1.4.1.2272.1.204.1.1.1.5 |
rcCbQe2kSerdesLinkEntryEntry for a QE based Serdes Link Interface.
The combination of the QE ID and Serdes Link ID
uniquely identifies a link. RcCbQe2kSerdesLinkEntry .1.3.6.1.4.1.2272.1.204.1.1.1.5.1 |
rcCbQe2kSerdesLinkIdThis ID maps to a particular serdes port number
for the identified device. Here's the mapping:
rcCbQe2kSerdesLinkId 1 = port 0; Slot 3; QE Device 1
...
rcCbQe2kSerdesLinkId 20 = port 19; Slot 3; QE Device 1
rcCbQe2kSerdesLinkId 21 = port 0; Slot 3; QE Device 2
rcCbQe2kSerdesLinkId 41 = port 0; Slot 3; QE Device 3
rcCbQe2kSerdesLinkId 61 = port 0; Slot 4; QE Device 1
rcCbQe2kSerdesLinkId 121 = port 0; Slot 1; QE Device 1
rcCbQe2kSerdesLinkId 141 = port 0; Slot 1; QE Device 1
rcCbQe2kSerdesLinkId 161 = port 0; Slot 5; QE Device 1
rcCbQe2kSerdesLinkId 221 = port 0; Slot 6; QE Device 1
... with slots 6-12 in order ...
rcCbQe2kSerdesLinkId 640 = port 19; Slot 12; QE Device 3
Note link 15 & 17 are used when QE2k is connected to SF96. Integer32 .1.3.6.1.4.1.2272.1.204.1.1.1.5.1.1 |
rcCbQe2kSerdesLinkTypeLink type of the serdes interfacero Enumeration .1.3.6.1.4.1.2272.1.204.1.1.1.5.1.2 |
rcCbQe2kSerdesLinkStatusInterface Statusro DeviceStatus .1.3.6.1.4.1.2272.1.204.1.1.1.5.1.3 |
rcCbQe2kSerdesLinkConnectedToDeviceThe SE/BME ID to which the QE2k ID is attached
to. Note that IDs 16 & 18 are unused.ro Integer32 .1.3.6.1.4.1.2272.1.204.1.1.1.5.1.4 |
rcCbQe2kSerdesLinkConnectedToSlotThe slot number of the switch fabric card to which the QE2k ID is attached to.ro Integer32 .1.3.6.1.4.1.2272.1.204.1.1.1.5.1.5 |
rcCbSESerdesLinkTableTable containing the Serdes Link Information
for the system. SEQUENCE OF RcCBSESerdesLinkEntry .1.3.6.1.4.1.2272.1.204.1.1.1.6 |
rcCbSESerdesLinkEntryEntry for an SE based Serdes Link Interface.
The combination of the QE ID and Serdes Link ID
uniquely identifies a link. RcCBSESerdesLinkEntry .1.3.6.1.4.1.2272.1.204.1.1.1.6.1 |
rcCbSESerdesLinkIdThis ID maps to a particular serdes port number
for the identified device. Here's the mapping:
SESerdesLinkId 1 = port 0; Slot 21; Device 1
SESerdesLinkId 33 = port 0; Slot 21; Device 2
SESerdesLinkId 65 = port 0; Slot 21; Device 3
SESerdesLinkId 97 = port 0; Slot 22; Device 1
...
SESerdesLinkId 640 = port 31; Slot 26; Device 3 Integer32 .1.3.6.1.4.1.2272.1.204.1.1.1.6.1.1 |
rcCbSESerdesLinkTypeLink Type of the Serdes interface. Switch control
interface is sci. Switch forwarding interface is sfi.ro Enumeration .1.3.6.1.4.1.2272.1.204.1.1.1.6.1.2 |
rcCbSESerdesLinkStatusInterface Statusro DeviceStatus .1.3.6.1.4.1.2272.1.204.1.1.1.6.1.3 |
rcCbSESerdesLinkConnectedToDeviceThe QE2k ID to which the SE/BME ID is attached to.ro Integer32 .1.3.6.1.4.1.2272.1.204.1.1.1.6.1.4 |
rcCbSESerdesLinkConnectedToSlotThe slot number of the switch fabric card to which the QE2k ID is attached to.ro Integer32 .1.3.6.1.4.1.2272.1.204.1.1.1.6.1.5 |
rcCbSE9600SerdesLinkTableTable containing the Fast Serdes Link Information
for the system. SEQUENCE OF RcCBSE9600SerdesLinkEntry .1.3.6.1.4.1.2272.1.204.1.1.1.7 |
rcCbSE9600SerdesLinkEntryEntry for an SE based Serdes Link Interface.
The combination of the QE ID and Serdes Link ID
uniquely identifies a link. RcCBSE9600SerdesLinkEntry .1.3.6.1.4.1.2272.1.204.1.1.1.7.1 |
rcCbSE9600SerdesLinkIdThis ID maps to a particular serdes port number
for the identified device. Here's the mapping:
SESerdesLinkId 1 = port 0; Slot 21; Device 1
SESerdesLinkId 97 = port 0; Slot 21; Device 2
SESerdesLinkId 193 = port 0; Slot 22; Device 1
SESerdesLinkId 289 = port 0; Slot 22; Device 2
...
SESerdesLinkId 1152 = port 96; Slot 26; Device 2 Integer32 .1.3.6.1.4.1.2272.1.204.1.1.1.7.1.1 |
rcCbSE9600SerdesLinkTypeLink Type of the Serdes interface. Switch control
interface is sci. Switch forwarding interface is sfi.ro Enumeration .1.3.6.1.4.1.2272.1.204.1.1.1.7.1.2 |
rcCbSE9600SerdesLinkStatusInterface Statusro DeviceStatus .1.3.6.1.4.1.2272.1.204.1.1.1.7.1.3 |
rcCbSE9600SerdesLinkConnectedToDeviceThe QE2k ID to which the SE/BME ID is attached to.ro Integer32 .1.3.6.1.4.1.2272.1.204.1.1.1.7.1.4 |
rcCbSE9600SerdesLinkConnectedToSlotThe slot number of the switch fabric card to which the QE2k ID is attached to.ro Integer32 .1.3.6.1.4.1.2272.1.204.1.1.1.7.1.5 |
rcCbSPITableTable containing the system peripheral interface info.obsolete SEQUENCE OF RcCBSPIEntry .1.3.6.1.4.1.2272.1.204.1.1.1.8 |
rcCbSPIEntrySPI table entryobsolete RcCBSPIEntry .1.3.6.1.4.1.2272.1.204.1.1.1.8.1 |
rcCbSPIIdThe Index for the SPI Table. Here is the layout
of the IDs in relation to the system:
Location ID(s)
-
Slot 1: 1..6
Slot 2: 7..12
...
Slot 12: 57..72
Current implementation uses the first 6 IDs for each slot.obsolete Integer32 .1.3.6.1.4.1.2272.1.204.1.1.1.8.1.1 |
rcCbSPIStatusSPI Statusroobsolete DeviceStatus .1.3.6.1.4.1.2272.1.204.1.1.1.8.1.2 |
rcVrrpv3 OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.206 |
rcVrrpTmpMib OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.206.1 |
rcVrrpTmpNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.206.1.0 |
rcVrrpTmpTrapNewMasterThe newMaster trap indicates that the sending agent
has transitioned to 'Master' state. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.206.1.0.1 |
rcVrrpTmpTrapProtoErrorThe error trap indicates that the sending agent has
encountered the protocol error indicated by
rcVrrpTmpTrapProtoErrorReason. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.206.1.0.3 |
rcVrrpTmpOperations OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.206.1.1 |
rcVrrpTmpNotificationCntlIndicates whether the VRRP-enabled router will generate
SNMP notifications for events defined in this MIB.
'Enabled' results in SNMP notifications; 'disabled', no
notifications are sent.rw Enumeration .1.3.6.1.4.1.2272.1.206.1.1.2 |
rcVrrpTmpOperationsTableUnified Operations table for a VRRP router which
consists of a sequence (i.e., one or more conceptual
rows) of 'rcVrrpTmpOperationsEntry' items which describe
the operational characteristics of a virtual router. SEQUENCE OF RcVrrpTmpOperationsEntry .1.3.6.1.4.1.2272.1.206.1.1.7 |
rcVrrpTmpOperationsEntryAn entry in the rcVrrpTmpOperationsTable containing the
operational characteristics of a virtual router. On a
VRRP router, a given virtual router is identified by a
combination of the IP version, VRID and ifIndex.
ifIndex represents a physical interface of the router.
Note that rows in this table can be distinguished on a
multi-stacked device running VRRP over IPv4 and
IPv6 on the same physical interface.
Rows in the table cannot be modified unless the value
of 'rcVrrpTmpOperationsState' has transitioned to
'initialize' RcVrrpTmpOperationsEntry .1.3.6.1.4.1.2272.1.206.1.1.7.1 |
rcVrrpTmpOperationsIfIndexport interface index. InterfaceIndex .1.3.6.1.4.1.2272.1.206.1.1.7.1.1 |
rcVrrpTmpOperationsInetAddrTypeThe IP address type of RcVrrpTmpOperationsEntry. This value
applies to both rcVrrpTmpOperationsMasterIpAddr and
rcVrrpTmpOperationsPrimaryIpAddr. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2272.1.206.1.1.7.1.2 |
rcVrrpTmpOperationsVrIdThis object contains the Virtual Router Identifier
(VRID). VrId (VRRP-MIB) .1.3.6.1.4.1.2272.1.206.1.1.7.1.3 |
rcVrrpTmpOperationsVirtualMacAddrThe virtual MAC address of the virtual router.
Although this object can be derived from the
'rcVrrpTmpOperationsVrId' object, it is defined so that it
is easily obtainable by a management application and
can be included in VRRP-related SNMP notifications.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2272.1.206.1.1.7.1.4 |
rcVrrpTmpOperationsStateThe current state of the virtual router. This object
has three defined values:
- `initialize', which indicates that the
virtual router is waiting for a startup event.
- `backup', which indicates the virtual router is
monitoring the availability of the master router.
- `master', which indicates that the virtual router
is forwarding packets for IP addresses that are
associated with this router.ro Enumeration .1.3.6.1.4.1.2272.1.206.1.1.7.1.5 |
rcVrrpTmpOperationsPriorityThis object specifies the priority to be used for the
virtual router master election process. Higher values
imply higher priority.
A priority of '0', although not settable, is sent by
the master router to indicate that this router has
ceased to participate in VRRP and a backup virtual
router should transition to become a new master.
A priority of 255 is used for the router that owns the
associated IP address(es) for VRRP over IPv4 and hence
not settable.
A 'badValue(3)' should be returned when a user tries to
set 0 or 255 for this object.rw Integer32 .1.3.6.1.4.1.2272.1.206.1.1.7.1.6 |
rcVrrpTmpOperationsAddrCountThe number of IP addresses that are associated with
this virtual router. This number is equal to the
number of rows in the rcVrrpTmpAssociatedAddrTable that
correspond to a given IP version/VRID/ifIndex.ro Integer32 .1.3.6.1.4.1.2272.1.206.1.1.7.1.7 |
rcVrrpTmpOperationsMasterIpAddrThe master router's real IP address. Master router
would set this address to rcVrrpTmpOperationsPrimaryIpAddr
while transitioning to master state. For backup
routers, this is the IP address listed as the source in
VRRP advertisement last received by this virtual
router.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2272.1.206.1.1.7.1.8 |
rcVrrpTmpOperationsPrimaryIpAddrIn the case where there are more than one IP
Address (associated IP addresses) for a given
`ifIndex', this object is used to specify the IP
address that will become the
rcVrrpTmpOperationsMasterIpAddr', should the virtual router
transition from backup state to master.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2272.1.206.1.1.7.1.9 |
rcVrrpTmpOperationsAdvIntervalThe time interval between sending advertisement messages.
Only the master router sends VRRP advertisements.
It is configured in seconds, but it is converted into
centiseconds that is used in the VRRP packets.rw TimeInterval .1.3.6.1.4.1.2272.1.206.1.1.7.1.10 |
rcVrrpTmpOperationsPreemptModeControls whether a higher priority virtual router will
preempt a lower priority master.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.206.1.1.7.1.11 |
rcVrrpTmpOperationsAcceptModeControls whether a virtual router in Master state
will accept packets addressed to the address owner's
IPv6 address as its own if it is not the IPv6 address
owner. Default is False.
This object is not relevant for rows representing VRRP
over IPv4 and should be set to false.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.206.1.1.7.1.12 |
rcVrrpTmpOperationsUpTimeThis is the value of the `sysUpTime' object when this
virtual router (i.e., the `rcVrrpTmpOperationsState')
transitioned out of `initialized'.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.2272.1.206.1.1.7.1.13 |
rcVrrpTmpOperationsStorageTypeThe storage type for this conceptual row. Write access
is not required. It is optional to support nonVolatile
StorageType enumeration.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.2272.1.206.1.1.7.1.14 |
rcVrrpTmpOperationsRowStatusThe RowStatus variable should be used in accordance to
installation and removal conventions for conceptual
rows. When `rcVrrpTmpOperationsRowStatus' is set to
active(1), no other objects in the conceptual row can
be modified.
To create a row in this table, a manager sets this
object to either createAndGo(4) or createAndWait(5).
Until instances of all corresponding columns are
appropriately configured, the value of the
corresponding instance of the `rcVrrpTmpOperationsRowStatus'
column will be read as notReady(3).
In particular, a newly created row cannot be made
active(1) until (minimally) the corresponding instance
of rcVrrpTmpOperationsInetAddrType, rcVrrpTmpOperationsVrId and
rcVrrpTmpOperationsPrimaryIpAddr has been set and there is
at least one active row in the
`rcVrrpTmpAssociatedIpAddrTable' defining an associated
IP address.
notInService(2) should be used to administratively
bring the row down.
A typical order of operation to add a row is:
1. Create a row in rcVrrpTmpOperationsTable with
createAndWait(5).
2. Create one or more corresponding rows in
rcVrrpTmpAssociatedIpAddrTable.
3. Populate the rcVrrpTmpOperationsEntry.
4. set rcVrrpTmpOperationsRowStatus to active(1).
A typical order of operation to delete an entry is:
1. Set rcVrrpTmpOperationsRowStatus to notInService(2).
2. Set the corresponding rows in
rcVrrpTmpAssociatedIpAddrTable to destroy(6) to delete the
entry.
3. set rcVrrpTmpOperationsRowStatus to destroy(6) to delete
the entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.206.1.1.7.1.15 |
rcVrrpTmpAssociatedIpAddrTableThe table of addresses associated with this virtual
router. SEQUENCE OF RcVrrpTmpAssociatedIpAddrEntry .1.3.6.1.4.1.2272.1.206.1.1.8 |
rcVrrpTmpAssociatedIpAddrEntryAn entry in the table contains an IP address that is
associated with a virtual router. The number of rows
for a given IP version, VrID and ifIndex will equal the
number of IP addresses associated (e.g., backed up) by
the virtual router (equivalent to
'rcVrrpTmpOperationsIpAddrCount').
Rows in the table cannot be modified unless the value
of `rcVrrpTmpOperationsState' has transitioned to
`initialize'. RcVrrpTmpAssociatedIpAddrEntry .1.3.6.1.4.1.2272.1.206.1.1.8.1 |
rcVrrpTmpAssociatedIpAddrThe assigned IP addresses that a virtual router is
responsible for backing up.
The size of this object is either 4 or 16 depending on
rcVrrpTmpOperationsInetAddrType. InetAddress .1.3.6.1.4.1.2272.1.206.1.1.8.1.1 |
rcVrrpTmpAssociatedIpAddrPrefixLengthThe length of the prefix (in bits). InetAddressPrefixLength (INET-ADDRESS-MIB) .1.3.6.1.4.1.2272.1.206.1.1.8.1.2 |
rcVrrpTmpAssociatedStorageTypeThe storage type for this conceptual row. Write access
is not required. It is optional to support nonVolatile
StorageType enumeration.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.2272.1.206.1.1.8.1.3 |
rcVrrpTmpAssociatedIpAddrRowStatusThe RowStatus variable, used according to
installation and removal conventions for conceptual
rows. To create a row in this table, a manager sets
this object to either createAndGo(4) or
createAndWait(5). Setting this object to active(1)
results in the addition of an associated address for a
virtual router. Setting this object to notInService(2)
results in administratively bringing down the row.
Destroying the entry or setting it to destroy(6)
removes the associated address from the virtual router.
The use of other values is implementation-dependent.
Only rcVrrpTmpAssociatedStorageType can be modified when the
row is in active(1) state for Implementations
supporting write access to rcVrrpTmpAssociatedStorageType
Implementations should not allow deletion of the last
row corresponding to an active row in
rcVrrpTmpOperationsTable.
Refer to description of rcVrrpTmpOperationsRowStatus for a
typical row creation and deletion scenarios.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.206.1.1.8.1.4 |
rcVrrpTmpNewMasterReasonThis indicates the reason for rcVrrpTmpNewMaster trap.
Used by rcVrrpTmpTrapNewMaster trap. The object can be
polled if the rcVrrpTmpNewMaster trap is lost to identify
the reason for transmission. Backup router should
return notmaster(0) when pooled.ro Enumeration .1.3.6.1.4.1.2272.1.206.1.1.9 |
rcVrrpTmpTrapProtoErrReasonThis indicates the reason for protocol error trap.
Used by rcVrrpTmpTrapProtoError trap.ro Enumeration .1.3.6.1.4.1.2272.1.206.1.1.10 |
rcVrrpTmpStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.206.1.2 |
rcVrrpTmpRouterChecksumErrorsThe total number of VRRP packets received with an
invalid VRRP checksum value.ro Counter32 .1.3.6.1.4.1.2272.1.206.1.2.1 |
rcVrrpTmpRouterVersionErrorsThe total number of VRRP packets received with an
unknown or unsupported version number.ro Counter32 .1.3.6.1.4.1.2272.1.206.1.2.2 |
rcVrrpTmpRouterVrIdErrorsThe total number of VRRP packets received with an
invalid VRID for this virtual router.ro Counter32 .1.3.6.1.4.1.2272.1.206.1.2.3 |
rcVrrpTmpRouterStatisticsTableTable of virtual router statistics. SEQUENCE OF RcVrrpTmpRouterStatisticsEntry .1.3.6.1.4.1.2272.1.206.1.2.5 |
rcVrrpTmpRouterStatisticsEntryAn entry in the table, containing statistics
information about a given virtual router. RcVrrpTmpRouterStatisticsEntry .1.3.6.1.4.1.2272.1.206.1.2.5.1 |
rcVrrpTmpStatisticsMasterTransitionsThe total number of times that this virtual router's
state has transitioned to MASTER.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
rcVrrpTmpStatisticsDiscontinuityTime.ro Counter32 .1.3.6.1.4.1.2272.1.206.1.2.5.1.1 |
rcVrrpTmpStatisticsRcvdAdvertisementsThe total number of VRRP advertisements received by
this virtual router.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
rcVrrpTmpStatisticsDiscontinuityTime.ro Counter32 .1.3.6.1.4.1.2272.1.206.1.2.5.1.2 |
rcVrrpTmpStatisticsAdvIntervalErrorsThe total number of VRRP advertisement packets
received for which the advertisement interval is
different than the one configured for the local virtual
router.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
rcVrrpTmpStatisticsDiscontinuityTime.ro Counter32 .1.3.6.1.4.1.2272.1.206.1.2.5.1.3 |
rcVrrpTmpStatisticsIpTtlErrorsThe total number of VRRP packets received by the
Virtual router with IPv4 TTL (for VRRP over IPv4) or
IPv6 Hop Limit (for VRRP over IPv6) not equal to 255.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
rcVrrpTmpStatisticsDiscontinuityTime.ro Counter32 .1.3.6.1.4.1.2272.1.206.1.2.5.1.4 |
rcVrrpTmpStatisticsRcvdPriZeroPacketsThe total number of VRRP packets received by the
virtual router with a priority of '0'.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
rcVrrpTmpStatisticsDiscontinuityTime.ro Counter32 .1.3.6.1.4.1.2272.1.206.1.2.5.1.5 |
rcVrrpTmpStatisticsSentPriZeroPacketsThe total number of VRRP packets sent by the virtual
router with a priority of '0'.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
rcVrrpTmpStatisticsDiscontinuityTime.ro Counter32 .1.3.6.1.4.1.2272.1.206.1.2.5.1.6 |
rcVrrpTmpStatisticsRcvdInvalidTypePktsThe number of VRRP packets received by the virtual
router with an invalid value in the 'type' field.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
rcVrrpTmpStatisticsDiscontinuityTime.ro Counter32 .1.3.6.1.4.1.2272.1.206.1.2.5.1.7 |
rcVrrpTmpStatisticsAddressListErrorsThe total number of packets received for which the
address list does not match the locally configured list
for the virtual router.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
rcVrrpTmpStatisticsDiscontinuityTime.ro Counter32 .1.3.6.1.4.1.2272.1.206.1.2.5.1.8 |
rcVrrpTmpStatisticsPacketLengthErrorsThe total number of packets received with a packet
length less than the length of the VRRP header.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
rcVrrpTmpStatisticsDiscontinuityTime.ro Counter32 .1.3.6.1.4.1.2272.1.206.1.2.5.1.9 |
rcVrrpTmpStatisticsRcvdInvalidAuthenticationsThe total number of packets received with an unknown
authentication type.ro Counter32 .1.3.6.1.4.1.2272.1.206.1.2.5.1.10 |
rcVrrpTmpStatisticsDiscontinuityTimeThe value of sysUpTime on the most recent occasion at
which any one or more of this entry's counters suffered
a discontinuity.
If no such discontinuities have occurred since the last
re-initialization of the local management subsystem,
then this object contains a zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.2272.1.206.1.2.5.1.11 |
rcVrrpTmpStatisticsRefreshRateThe minimum reasonable polling interval for this entry.
This object provides an indication of the minimum
Amount of time required to update the counters in this
entry.ro Integer32 UNITS "milli-seconds" .1.3.6.1.4.1.2272.1.206.1.2.5.1.12 |
rcVrrpExtMib OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.206.2 |
rcVrrpExtObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.206.2.1 |
rcVrrpExtScalars OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.206.2.1.1 |
rcVrrpExtVersionNumberThe version number of Vrrp for IPv6 is 3.ro Enumeration .1.3.6.1.4.1.2272.1.206.2.1.1.2 |
rcVrrpExtTrapStateTransitionTypePotential types of state transitions.Used by
rcVrrpv3TrapStateTransition trap.ro Enumeration .1.3.6.1.4.1.2272.1.206.2.1.1.3 |
rcVrrpExtTrapStateTransitionCausePotential types of causes that will generate a
rcVrrpExtTrapStateTransition trap.ro Enumeration .1.3.6.1.4.1.2272.1.206.2.1.1.4 |
rcVrrpExtOperationsVrIdThis object contains the Virtual Router Identifier
(VRID).This is used in rcVrrpExtTrapStateTransition.ro VrId (VRRP-MIB) .1.3.6.1.4.1.2272.1.206.2.1.1.5 |
rcVrrpExtNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.206.2.2 |
rcVrrpExtTrapStateTransitionA rcVrrpExtTrapStateTransition trap signifies a state
transition has occurred on a particular vrrp interface.
Implementation of this trap is optional. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.206.2.2.1 |
rcVrrpExtOperations OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.206.2.3 |
rcVrrpExtOperationsTableUnified Operations table for a VRRP router which consists of
a sequence (i.e., one or more conceptual rows) of
'rcVrrpExtOperationsEntry'and 'rcVrrpTmpOperationsEntry' items
which describe the operational characteristics of a virtual
router.
This table is an extention of 'rcVrrpTmpOperationsTable'.It
contains the mib objects that are Nortel specific. SEQUENCE OF RcVrrpExtOperationsEntry .1.3.6.1.4.1.2272.1.206.2.3.11 |
rcVrrpExtOperationsEntryAn entry in the rcVrrpExtOperationsTable containing the
operational characteristics of a virtual router. On a
VRRP router, a given virtual router is identified by a
combination of the IP version, VRID and ifIndex.
ifIndex represents a physical interface of the router.
Note that rows in this table can be distinguished on a
multi-stacked device running VRRP over IPv4 and
IPv6 on the same physical interface.
Rows in the table cannot be modified unless the value
of 'rcVrrpTmpOperationsState' has transitioned to
'initialize'. RcVrrpExtOperationsEntry .1.3.6.1.4.1.2272.1.206.2.3.11.1 |
rcVrrpExtOperationsActionUsed to trigger an action on this vrrp interface.rw Enumeration .1.3.6.1.4.1.2272.1.206.2.3.11.1.1 |
rcVrrpExtOperationsBackUpMasterEnable the backup VRRP switch traffic forwarding.
This will reduce the traffic in IST link in the
time of SMLT.rw Enumeration .1.3.6.1.4.1.2272.1.206.2.3.11.1.2 |
rcVrrpExtOperationsBackUpMasterStateIndicate whether backup VRRP switch traffic
forwarding is enabled or not.ro Enumeration .1.3.6.1.4.1.2272.1.206.2.3.11.1.3 |
rcVrrpExtOperationsCriticalIpAddrIP address of the interface that will cause a
shutdown event.Only IPv6 address is supported as of now.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2272.1.206.2.3.11.1.4 |
rcVrrpExtOperationsCriticalIpAddrEnabledIndicate if an user-defined critical IP address should be
enabled. 'NO' = use the default IP address (::).
No effect if an user-defined IP address does not exist.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.206.2.3.11.1.5 |
rcVrrpExtOperationsControlThis object will enable/disable the virtual router
function. Setting the value to 'enabled', will transition
the state of the router from 'initialize to 'backup';
Setting the value to 'disabled', will tranisition the
router from 'master' or 'backup' to 'initialize'.rw Enumeration .1.3.6.1.4.1.2272.1.206.2.3.11.1.6 |
rcVrrpExtOperationsHoldDownTimerUsed to configure the amount of time (in seconds)
to wait before preempting the current vrrp master.rw Integer32 .1.3.6.1.4.1.2272.1.206.2.3.11.1.7 |
rcVrrpExtOperationsHoldDownStateUsed to indicate the hold-down state of this vrrp
interface. If the hold-down timer is operational
this variable will be set to 'active'. 'dormant'
otherwise.ro Enumeration .1.3.6.1.4.1.2272.1.206.2.3.11.1.8 |
rcVrrpExtOperationsHoldDownTimeRemainingUsed to indicate the amount of time (in seconds) left
before the rcVrrpExtOperationsHoldDownTimer will expire.ro Integer32 .1.3.6.1.4.1.2272.1.206.2.3.11.1.9 |
rcVrrpExtOperationsFasterAdvIntervalThis is the faster advertisement interval, in milliseconds,
between sending advertisement messages. When the faster
advertisement interval enable is checked, the faster
advertisement interval is being used instead of the regular
advertisement interval.rw Integer32 .1.3.6.1.4.1.2272.1.206.2.3.11.1.10 |
rcVrrpExtOperationsFasterAdvIntervalEnabledUsed to indicate if the Faster Advertisement Interval
should be used.'Disable' means use regular Advertisement
interval.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.206.2.3.11.1.11 |
rcVrrpExtOperationsLinkLocalAddrThe assigned Linklocal addresses to the virtual
router interface. This mib object support only IPv6
address as of now.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2272.1.206.2.3.11.1.12 |
rcVrrpExtOperationsGlobalIpAddrThe assigned Global addresses to the virtual router
interface. This mib object support only IPv6 address
as of now.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2272.1.206.2.3.11.1.13 |
rcVspTalk OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.208 |
rcVspTalkObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.208.1 |
rcVspTalkScalars OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.208.1.1 |
rcVspTalkGlobalEnableCreate or destroy the VSPTalk related data structure and threads.
When it is false, rcVspTalkGroupTable entry will be removed.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.208.1.1.1 |
rcVspTalkEndpointAddressThe assigned circuitless IP address of the application endpoint
which must belong to the same subnet of existing IP interface on
device. This object assignment requires rcVspTalkEndpointVrfName
and rcVspTalkEndpointMacOffsetrw IpAddress .1.3.6.1.4.1.2272.1.208.1.1.2 |
rcVspTalkEndpointVrfNameThe name of the virtual Router which rcVspTalkEndpointAddress
belong to.rw DisplayString .1.3.6.1.4.1.2272.1.208.1.1.3 |
rcVspTalkNotificationEnableEnable/disable the notifcation of the register eventsrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.208.1.1.4 |
rcVspTalkGroupTableVsp Talk Group includes IM configuraton and users SEQUENCE OF RcVspTalkGroupEntry .1.3.6.1.4.1.2272.1.208.1.2 |
rcVspTalkGroupEntryEntry of the IM group RcVspTalkGroupEntry .1.3.6.1.4.1.2272.1.208.1.2.1 |
rcVspTalkGroupTypeType of VSP messaging group Enumeration .1.3.6.1.4.1.2272.1.208.1.2.1.1 |
rcVspTalkGroupServerAddressMessaging server addressrw DisplayString .1.3.6.1.4.1.2272.1.208.1.2.1.2 |
rcVspTalkGroupServerPortThe TCP port for Messagingrw Integer32 .1.3.6.1.4.1.2272.1.208.1.2.1.3 |
rcVspTalkGroupServerOldSslTypeEnableEnable/disable using old style SSL interfacerw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.208.1.2.1.4 |
rcVspTalkGroupServerEncryptionEncrytion option.rw Enumeration .1.3.6.1.4.1.2272.1.208.1.2.1.5 |
rcVspTalkGroupServerProxyMessaging server proxyrw DisplayString .1.3.6.1.4.1.2272.1.208.1.2.1.6 |
rcVspTalkGroupClientUsernameMessaging client Username for this devicerw DisplayString .1.3.6.1.4.1.2272.1.208.1.2.1.7 |
rcVspTalkGroupClientPasswordPassword for rcVspTalkGroupClientUsername which is registered
in the server.rw DisplayString .1.3.6.1.4.1.2272.1.208.1.2.1.8 |
rcVspTalkGroupClientMembersA list of members of this messaging group. There is
a max of 12 members, with names seperated by commarw DisplayString .1.3.6.1.4.1.2272.1.208.1.2.1.9 |
rcVspTalkGroupEnableAdminstratively Enable/disable this messaging grouprw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.208.1.2.1.10 |
rcVspTalkGroupRowStatusUsed to create/delete entriesrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.208.1.2.1.11 |
rcA1100 OBJECT IDENTIFIER .1.3.6.1.4.1.2272.2 |
rcA1250 OBJECT IDENTIFIER .1.3.6.1.4.1.2272.6 |
rcA1150 OBJECT IDENTIFIER .1.3.6.1.4.1.2272.7 |
rcA1200 OBJECT IDENTIFIER .1.3.6.1.4.1.2272.8 |
rcA1050 OBJECT IDENTIFIER .1.3.6.1.4.1.2272.9 |
rcA740 OBJECT IDENTIFIER .1.3.6.1.4.1.2272.20 |
rcA750 OBJECT IDENTIFIER .1.3.6.1.4.1.2272.21 |
rcA790 OBJECT IDENTIFIER .1.3.6.1.4.1.2272.22 |
rcA750S OBJECT IDENTIFIER .1.3.6.1.4.1.2272.23 |
rcA8610 OBJECT IDENTIFIER .1.3.6.1.4.1.2272.30 |
rcA8606 OBJECT IDENTIFIER .1.3.6.1.4.1.2272.31 |
rcA8110 OBJECT IDENTIFIER .1.3.6.1.4.1.2272.32 |
rcA8106 OBJECT IDENTIFIER .1.3.6.1.4.1.2272.33 |
rcA8603 OBJECT IDENTIFIER .1.3.6.1.4.1.2272.34 |
rcA8103 OBJECT IDENTIFIER .1.3.6.1.4.1.2272.35 |
rcA8110co OBJECT IDENTIFIER .1.3.6.1.4.1.2272.36 |
rcA8610co OBJECT IDENTIFIER .1.3.6.1.4.1.2272.37 |
rcBayStack OBJECT IDENTIFIER .1.3.6.1.4.1.2272.40 |
rcA1424 OBJECT IDENTIFIER .1.3.6.1.4.1.2272.42 |
rcA1648 OBJECT IDENTIFIER .1.3.6.1.4.1.2272.43 |
rcA1612 OBJECT IDENTIFIER .1.3.6.1.4.1.2272.44 |
rcA1624 OBJECT IDENTIFIER .1.3.6.1.4.1.2272.45 |
rcRBS2402 OBJECT IDENTIFIER .1.3.6.1.4.1.2272.46 |
rcVSP9012 OBJECT IDENTIFIER .1.3.6.1.4.1.2272.201 |
rcA8003 OBJECT IDENTIFIER .1.3.6.1.4.1.2272.280887555 |
rcA8006 OBJECT IDENTIFIER .1.3.6.1.4.1.2272.280887558 |
rcA8010 OBJECT IDENTIFIER .1.3.6.1.4.1.2272.280887562 |
rcA8010co OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1623064842 |
More MIBs from Rapidcity
Browse all RapidcityMIBs →RAPID-CITY
The RAPID-CITY MIB module facilitates SNMP-based monitoring and management of Accelar product family hardware, specifically tracking performance metrics such as throughput, connection states, and resource utilization for traffic acceleration appliances.
6502 objects→
RC-CFM-MIB
The RC-CFM-MIB module enables monitoring of Ethernet Connectivity Fault Management (CFM) state variables, including Maintenance Domain, Maintenance Association, and Maintenance Endpoint operational statuses, to detect and isolate Layer 2 network faults. It provides specific counters and gauges for CFM message transmission, reception, and error conditions to facilitate rapid diagnosis of link integrity and service continuity issues.
572 objects→
SWL2MGMT-MIB
SNMP MIB module
286 objects→
RC-IP-POLICY-MIB
The RC-IP-POLICY-MIB module provides SNMP access to configure and monitor IP traffic filtering rules, policy routing decisions, and associated session statistics on Accelar network appliances. It enables administrators to track policy hit counts, match conditions, and enforcement states for granular control over packet forwarding and security policies.
220 objects→
RC-2K-MIB
SNMP MIB module
218 objects→
RC-PORT-MIB
SNMP MIB module
198 objects→