RC-IP-POLICY-MIB
AI MIB Summary
The RC-IP-POLICY-MIB module provides SNMP access to configure and monitor IP traffic filtering rules, policy routing decisions, and associated session statistics on Accelar network appliances. It enables administrators to track policy hit counts, match conditions, and enforcement states for granular control over packet forwarding and security policies.
Enterprise MIB for the Accelar product family.
Main OID:
rcIpPolicyMib.1.3.6.1.4.1.2272.1.8.11.0
220
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
220 total| Object Name |
|---|
rcIpPolicyMibEnterprise MIB for the Accelar product family. MODULE-IDENTITY .1.3.6.1.4.1.2272.1.8.11.0 |
rcIpPolicyAddrTableSizeUsed to indicate the number of entries in the
rcIpPolicyAddrTable.rodeprecated Integer32 .1.3.6.1.4.1.2272.1.8.11.1 |
rcIpPolicyAddrTableA table used to store different types list entries.
Each row in the table contains a list entry that is
used by a set of announce policies.deprecated SEQUENCE OF RcIpPolicyAddrEntry .1.3.6.1.4.1.2272.1.8.11.2 |
rcIpPolicyAddrEntryRoute entry attributes.deprecated RcIpPolicyAddrEntry .1.3.6.1.4.1.2272.1.8.11.2.1 |
rcIpPolicyAddrIpAddrThe network address for this type of list entry. This
value is required for all types of lists.rodeprecated IpAddress .1.3.6.1.4.1.2272.1.8.11.2.1.1 |
rcIpPolicyAddrIdIdentifier of this entry. Used internally to identify
this entry.rodeprecated Integer32 .1.3.6.1.4.1.2272.1.8.11.2.1.2 |
rcIpPolicyAddrAddrListIdListSizeUsed to indicate the number of id(s) in the
rcIpPolicyAddrListIdList variable.rodeprecated INTEGER .1.3.6.1.4.1.2272.1.8.11.2.1.3 |
rcIpPolicyAddrAddrListIdListUsed to indicate zero or more rcIpPolicyAddrListEntry(s)
that are referring to this entry. Each list-id identifier
is stored as two bytes in this array starting from
offset zero. Any unused bytes should be set to zero.rodeprecated OCTET STRING .1.3.6.1.4.1.2272.1.8.11.2.1.4 |
rcIpPolicyAddrRowStatusRow status of this entry.rwdeprecated RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.11.2.1.5 |
rcIpPolicyNetTableSizeUsed to indicate the number of entries in the
rcIpPolicyNetTable.rodeprecated Integer32 .1.3.6.1.4.1.2272.1.8.11.3 |
rcIpPolicyNetTableA table used to store different types list entries.
Each row in the table contains a list entry that is
used by a set of announce policies.deprecated SEQUENCE OF RcIpPolicyNetEntry .1.3.6.1.4.1.2272.1.8.11.4 |
rcIpPolicyNetEntryRoute entry attributes.deprecated RcIpPolicyNetEntry .1.3.6.1.4.1.2272.1.8.11.4.1 |
rcIpPolicyNetAddrThe network address for this type of list entry. This
value is required for all types of lists.rodeprecated IpAddress .1.3.6.1.4.1.2272.1.8.11.4.1.1 |
rcIpPolicyNetMaskThe route mask for this type of list entry. This
value is meaningful only if rcIpPolicyNetEntry
is equal to exactNet(1), rangeNet(2), advertiseNet(3).
For other types it should have the value 0.0.0.0.rodeprecated IpAddress .1.3.6.1.4.1.2272.1.8.11.4.1.2 |
rcIpPolicyNetIdUsed internally to recognize this entry.rodeprecated Integer32 .1.3.6.1.4.1.2272.1.8.11.4.1.3 |
rcIpPolicyNetNetListIdListSizeUsed to indicate the number of id(s) in the
rcIpPolicyNetListIdList variable.rodeprecated INTEGER .1.3.6.1.4.1.2272.1.8.11.4.1.4 |
rcIpPolicyNetNetListIdListUsed to indicate zero or more rcIpPolicyNetListEntry(s)
that are referring to this entry. Each list-id identifier
is stored as two bytes in this array starting from
offset zero. Any unused bytes should be set to zero.rodeprecated OCTET STRING .1.3.6.1.4.1.2272.1.8.11.4.1.5 |
rcIpPolicyNetRowStatusRow status of this entry.rwdeprecated RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.11.4.1.6 |
rcIpPolicyAddrListTableSizeUsed to indicate the number of entries in the
rcIpPolicyAddrListTable.rodeprecated Integer32 .1.3.6.1.4.1.2272.1.8.11.5 |
rcIpPolicyAddrListTableA table used to group rcIpPolicyAddrEntry(s)
into a list.deprecated SEQUENCE OF RcIpPolicyAddrListEntry .1.3.6.1.4.1.2272.1.8.11.6 |
rcIpPolicyAddrListEntryRoute entry attributes.deprecated RcIpPolicyAddrListEntry .1.3.6.1.4.1.2272.1.8.11.6.1 |
rcIpPolicyAddrListIdA value that uniquely identifies this list of
rcIpPolicyAddrListEntry.rodeprecated INTEGER .1.3.6.1.4.1.2272.1.8.11.6.1.1 |
rcIpPolicyAddrListNameAn administratively-assigned name for this list.rwdeprecated DisplayString .1.3.6.1.4.1.2272.1.8.11.6.1.3 |
rcIpPolicyAddrListIdListSizeUsed to indicate the number of rcIpPolicyAddrNetEntry
id(s) in the rcIpPolicyAddrListIdList variable.rodeprecated INTEGER .1.3.6.1.4.1.2272.1.8.11.6.1.4 |
rcIpPolicyAddrListIdListUsed to indicate zero or more AddrListId that
are associated to this list. Each AddrList identifier
is stored as two bytes in this array starting from
offset zero. Any unused bytes should be set to zero.rwdeprecated OCTET STRING .1.3.6.1.4.1.2272.1.8.11.6.1.5 |
rcIpPolicyAddrListPolicyIdListSizeUsed to indicate the number of policy id(s) in the
Policy Id list. That are referring to this list.rodeprecated INTEGER .1.3.6.1.4.1.2272.1.8.11.6.1.6 |
rcIpPolicyAddrListPolicyIdListUsed to indicate zero or more policies that
are referring to this entry. Each policy identifier
is stored as two bytes in this array starting from
offset zero. Any unused bytes should be set to zero.rodeprecated OCTET STRING .1.3.6.1.4.1.2272.1.8.11.6.1.7 |
rcIpPolicyAddrListRowStatusRow status of this entry.rwdeprecated RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.11.6.1.8 |
rcIpPolicyRipAnnounceTableSizeUsed to indicate the number of entries in the
rcIpPolicyRipAnnounceTable.rodeprecated Integer32 .1.3.6.1.4.1.2272.1.8.11.7 |
rcIpPolicyRipAnnounceTableA table used to store set of announce policies
configured for RIP routing protocol. The Number
of entries is given by rcIpPolicyNumRipPolicies.deprecated SEQUENCE OF RcIpPolicyRipAnnounceEntry .1.3.6.1.4.1.2272.1.8.11.8 |
rcIpPolicyRipAnnounceEntryEntry containing configuration information for a
particular announce policy.deprecated RcIpPolicyRipAnnounceEntry .1.3.6.1.4.1.2272.1.8.11.8.1 |
rcIpPolicyRipAnnounceIdA value that uniquely identifies the policy
associated with this entry.rodeprecated INTEGER .1.3.6.1.4.1.2272.1.8.11.8.1.1 |
rcIpPolicyRipAnnounceNameAn administratively-assigned name for this policy.rwdeprecated DisplayString .1.3.6.1.4.1.2272.1.8.11.8.1.2 |
rcIpPolicyRipAnnounceEnableIt indicates whether this policy is enabled or not.
The policy should be applied only if it is set to 'true'.rwdeprecated TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.11.8.1.3 |
rcIpPolicyRipAnnounceExactNetListIdUsed to indicate the number of 'exact' type entries
that are configured for this policy.
An entry with type 'exactNet' or 'rangeNet' represents
the network list. This indicates which networks will
match a particular announce policy.
An entry with a 'exact' type means to only match the
specific network advertisement (netaddr & mask).
An 'exact' entry with addr=0.0.0.0 and mask=0.0.0.0
means 'match the default route'.
If set to '0', this policy applies to all the routes.rwdeprecated INTEGER .1.3.6.1.4.1.2272.1.8.11.8.1.4 |
rcIpPolicyRipAnnounceRangeNetListIdUsed to indicate zero or more 'range' network entries
that are associated with this policy.
An entry with a 'range' type means to match any network
number that falls in the range indicated by the addr &
mask.
A 'range' entry with addr=0.0.0.0 and mask=0.0.0.0
means 'match any route'.
If set to '0', this policy applies to all the routes.rwdeprecated INTEGER .1.3.6.1.4.1.2272.1.8.11.8.1.5 |
rcIpPolicyRipAnnounceRipGatewayListIdUsed to identify the RIP-gatewayList in the list
that are associated with this policy.
This field has meaning only for RIP sourced routes and
if RIP is included as a RouteSource.
The list contains one or more rip-routers (other side
of the interface) addresses that could send RIP updates
to this router. If a router
address is included in this list, this policy applies to
RIP advertisements from that router.
If set to '0', this policy applies to RIP updates
received from any rip routers/interfaces.rwdeprecated INTEGER .1.3.6.1.4.1.2272.1.8.11.8.1.6 |
rcIpPolicyRipAnnounceRipInterfaceListIdUsed to indicate the number of entries in the
ripInterfaceIdList that are configured for this policy.
This field has meaning only for RIP sourced routes and
if RIP is included as a RouteSource. The list contains
one or more rip-interface addresses on this router.
If an interface address is incuded in this list, this
policy applies to RIP advertisements received on that
interface.
A value of '0' indicates thtat this policy applies to
RIP updates received on any rip-interface.rwdeprecated INTEGER .1.3.6.1.4.1.2272.1.8.11.8.1.7 |
rcIpPolicyRipAnnounceOspfRouterListIdUsed to indicate the number of entries in the
OspfRouteIds that are configured for this policy.
This field has meaning only for OSPF sourced routes and
if OSPF is included as a RouteSource. The list contains
one or more router IDs of OSPF routers. If a routerId
is included in this list, this policy applies to
OSPF advertisements received from that router.
A value of '0' indicates that this policy applies to
any OPSF routes received from any router.rwdeprecated INTEGER .1.3.6.1.4.1.2272.1.8.11.8.1.8 |
rcIpPolicyRipAnnounceAnnounceInterfaceListIdUsed to indicate the number of entries in the
AnnounceInterfaceids that are configured for this policy.
The list contains one or more outbound interface
addresses. If the outbound interface address in this
list, the policy applies to RIP updates/advertisements
sent through this interface.
A value of '0' indicates that this policy applies to
any outbound RIP interface on this router.rwdeprecated INTEGER .1.3.6.1.4.1.2272.1.8.11.8.1.9 |
rcIpPolicyRipAnnouncePrecedenceIs used while comparing this policy rule with other
policy that a given route may match. A rule with a
higher precedence value will be chosen over one with
a smaller value. In the case of a tie, the PolicyId is
used (larger wins).rwdeprecated INTEGER .1.3.6.1.4.1.2272.1.8.11.8.1.10 |
rcIpPolicyRipAnnounceRouteSourceIs represented as bitset to indicate route sources.
It can contain one or more route sources. If the route
source is in this bit map, then a route from that source
that meets the other criteria of this policy will match
the policy.rwdeprecated Enumeration .1.3.6.1.4.1.2272.1.8.11.8.1.11 |
rcIpPolicyRipAnnounceAdvertiseNetListIdUsed to indicate the number of entries in the
AdvertiseNetList that are configured for this policy.
This has meaning only if the Action is set to 'announce'.
It is useful to send or advertise networks that differ
from actual network in the routing table. Also allows
advertisement of an aggregate or default along with the
actual network. Aggregation is useful if a number of
routes in the table falls in a certain range. Can save
space by sending aggregate route instead of the individual
routes.
Actual network/route is included in the update
only if there is a match or there there is an entry
(address & mask pair) 255.255.255.255/255.255.255.255
in the list.rwdeprecated INTEGER .1.3.6.1.4.1.2272.1.8.11.8.1.12 |
rcIpPolicyRipAnnounceActionIt indicates whether the route should be announced
or not.rwdeprecated Enumeration .1.3.6.1.4.1.2272.1.8.11.8.1.13 |
rcIpPolicyRipAnnounceOspfRouteTypeOspf Route type. It applies to OSPF sourced routes only.
'type1' means to apply this policy to only type1 OSPF
external routes. 'type2' means to apply this policy to
only type2 OSPF external routes. 'internal' means 'match
ospf specfic routes'. 'any' means apply this policy to
all OSPF external routes.rwdeprecated Enumeration .1.3.6.1.4.1.2272.1.8.11.8.1.14 |
rcIpPolicyRipAnnounceRipMetricRIP metric. The value is meaningful only if the action
is set to 'announce'. This is optional export metric
to use when advertising a route that matches this policy.
If set to zero, the routing table metric calculated for
RIP is is used.rwdeprecated INTEGER .1.3.6.1.4.1.2272.1.8.11.8.1.15 |
rcIpPolicyRipAnnounceRowStatusRow status of this entry.rwdeprecated RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.11.8.1.16 |
rcIpPolicyOspfAnnounceTableSizeUsed to indicate the number of entries in the
rcIpPolicyOspfAnnounceTable.rodeprecated Integer32 .1.3.6.1.4.1.2272.1.8.11.9 |
rcIpPolicyOspfAnnounceTableA table used to store set of announce policies
configured for OSPF routing protocol. The Number
of entries is given by rcIpPolicyNumOspfPolicies.deprecated SEQUENCE OF RcIpPolicyOspfAnnounceEntry .1.3.6.1.4.1.2272.1.8.11.10 |
rcIpPolicyOspfAnnounceEntryEntry containing configuration information for a
particular announce policy.deprecated RcIpPolicyOspfAnnounceEntry .1.3.6.1.4.1.2272.1.8.11.10.1 |
rcIpPolicyOspfAnnounceIdA value that uniquely identifies the policy
associated with this entry.rodeprecated INTEGER .1.3.6.1.4.1.2272.1.8.11.10.1.1 |
rcIpPolicyOspfAnnounceNameAn administratively-assigned name for this policy.rwdeprecated DisplayString .1.3.6.1.4.1.2272.1.8.11.10.1.2 |
rcIpPolicyOspfAnnounceEnableIt indicates whether this policy is enabled or not.
The policy should be applied only if it is set to
'true'.rwdeprecated TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.11.10.1.3 |
rcIpPolicyOspfAnnounceExactNetListIdUsed to indicate the number of 'exact' type entries
that are configured for this policy.
An entry with type 'exactNet' or 'rangeNet' represents
the network list. This indicates which networks will
match a particular announce policy.
An entry with a 'exact' type means to only match the
specific network advertisement (netaddr & mask).
An 'exact' entry with addr=0.0.0.0 and mask=0.0.0.0
means 'match the default route'.
If set to '0', this policy applies to all the routes.rwdeprecated INTEGER .1.3.6.1.4.1.2272.1.8.11.10.1.4 |
rcIpPolicyOspfAnnounceRangeNetListIdUsed to indicate zero or more 'range' network entries
that are associated with this policy.
An entry with a 'range' type means to match any network
number that falls in the range indicated by the addr &
mask.
A 'range' entry with addr=0.0.0.0 and mask=0.0.0.0
means 'match any route'.
If set to '0', this policy applies to all the routes.rwdeprecated INTEGER .1.3.6.1.4.1.2272.1.8.11.10.1.5 |
rcIpPolicyOspfAnnounceRipGatewayListIdUsed to identify the RIP-gatewayList in the list
that are associated with this policy.
This field has meaning only for RIP sourced routes and
if RIP is included as a RouteSource.
The list contains one or more rip-routers (other side
of the interface) addresses that could send RIP updates
to this router. If a router
address is included in this list, this policy applies to
RIP advertisements from that router.
If set to '0', this policy applies to RIP updates
received from any rip routers/interfaces.rwdeprecated INTEGER .1.3.6.1.4.1.2272.1.8.11.10.1.6 |
rcIpPolicyOspfAnnounceRipInterfaceListIdUsed to indicate the number of entries in the
ripInterfaceIdList that are configured for this policy.
This field has meaning only for RIP sourced routes and
if RIP is included as a RouteSource. The list contains
one or more rip-interface addresses on this router.
If an interface address is incuded in this list, this
policy applies to RIP advertisements received on that
interface.
A value of '0' indicates thtat this policy applies to
RIP updates received on any rip-interface.rwdeprecated INTEGER .1.3.6.1.4.1.2272.1.8.11.10.1.7 |
rcIpPolicyOspfAnnouncePrecedenceIs used while comparing this policy rule with other
policy that a given route may match. A rule with a
higher precedence value will be chosen over one with
a smaller value. In the case of a tie, the PolicyId is
used (larger wins).rwdeprecated INTEGER .1.3.6.1.4.1.2272.1.8.11.10.1.8 |
rcIpPolicyOspfAnnounceRouteSourceIs represented as bit map to indicate route sources.
It can contain one or more route sources. If the route
source is in this bit map, then a route from that source
that meets the other criteria of this policy will match
the policy.rwdeprecated Enumeration .1.3.6.1.4.1.2272.1.8.11.10.1.9 |
rcIpPolicyOspfAnnounceAdvertiseNetListIdUsed to indicate the number of entries in the
AdvertiseNetList that are configured for this policy.
This has meaning only if the Action is set to 'announce'.
It is useful to send or advertise networks that differ
from actual network in the routing table. Also allows
advertisement of an aggregate or default along with the
actual network. Aggregation is useful if a number of
routes in the table falls in a certain range. Can save
space by sending aggregate route instead of the individual
routes.
Actual network/route is included in the update
only if there is a match or there there is an entry
(address & mask pair) 255.255.255.255/255.255.255.255
in the list.rwdeprecated INTEGER .1.3.6.1.4.1.2272.1.8.11.10.1.10 |
rcIpPolicyOspfAnnounceActionIt indicates whether the route should be announced
or not.rwdeprecated Enumeration .1.3.6.1.4.1.2272.1.8.11.10.1.11 |
rcIpPolicyOspfAnnounceExtMetricTypeOspf External metric type. It is used to indicate
what type of the external metric it is. 'type1' means to
the cost is 'internal ospf cost + ExtMetric'.
'type2' means the ospf-metric is equal to 'type2'.rwdeprecated Enumeration .1.3.6.1.4.1.2272.1.8.11.10.1.12 |
rcIpPolicyOspfAnnounceExtMetricOSPF External metric. The value is meaningful only if
the action is set to 'announce'. This is optional export
metric to use when advertising a route that matches this
policy. Value '0' is used to indicate that route's actual
cost is used to announce.rwdeprecated INTEGER .1.3.6.1.4.1.2272.1.8.11.10.1.13 |
rcIpPolicyOspfAnnounceRowStatusRow status of this entry.rwdeprecated RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.11.10.1.14 |
rcIpPolicyRipAcceptTableSizeUsed to indicate the number of entries in the
rcIpPolicyRipAcceptTable.rodeprecated Integer32 .1.3.6.1.4.1.2272.1.8.11.11 |
rcIpPolicyRipAcceptTableA table used to store set of accept policies
configured for RIP routing protocol. The Number
of entries is given by rcIpPolicyNumRipPolicies.deprecated SEQUENCE OF RcIpPolicyRipAcceptEntry .1.3.6.1.4.1.2272.1.8.11.12 |
rcIpPolicyRipAcceptEntryEntry containing configuration information for a
particular accept policy.deprecated RcIpPolicyRipAcceptEntry .1.3.6.1.4.1.2272.1.8.11.12.1 |
rcIpPolicyRipAcceptIdA value that uniquely identifies the policy
associated with this entry.rodeprecated INTEGER .1.3.6.1.4.1.2272.1.8.11.12.1.1 |
rcIpPolicyRipAcceptNameAn administratively-assigned name for this policy.rwdeprecated DisplayString .1.3.6.1.4.1.2272.1.8.11.12.1.2 |
rcIpPolicyRipAcceptEnableIt indicates whether this policy is enabled or not.
The policy should be applied only if it is set to 'true'.rwdeprecated TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.11.12.1.3 |
rcIpPolicyRipAcceptExactNetListIdUsed to indicate the number of 'exact' type entries
that are configured for this policy.
An entry with type 'exactNet' or 'rangeNet' represents
the network list. This indicates which networks will
match a particular accept policy.
An entry with a 'exact' type means to only match the
specific network advertisement (netaddr & mask).
An 'exact' entry with addr=0.0.0.0 and mask=0.0.0.0
means 'match the default route'.rwdeprecated INTEGER .1.3.6.1.4.1.2272.1.8.11.12.1.4 |
rcIpPolicyRipAcceptRangeNetListIdUsed to indicate zero or more 'range' network entries
that are associated with this policy.
An entry with a 'range' type means to match any network
number that falls in the range indicated by the addr &
mask.
A 'range' entry with addr=0.0.0.0 and mask=0.0.0.0
means 'match any route'.
A null list means 'match any route'.rwdeprecated INTEGER .1.3.6.1.4.1.2272.1.8.11.12.1.5 |
rcIpPolicyRipAcceptRipGatewayListIdUsed to identify the RIP-gatewayList in the
PolicyListTable that iares associated with this
policy. The list contains the addresses of one or more
routers that could send RIP updates to this router.
If a router address is included in this list, this
policy applies to RIP advertisements from that router.
If set to '0', this policy applies to RIP updates
from any router.rwdeprecated INTEGER .1.3.6.1.4.1.2272.1.8.11.12.1.6 |
rcIpPolicyRipAcceptRipInterfaceListIdUsed to indicate ListId defined for RipInterfaceList
in the rcIpPolicyListTable that is assiciated
with this policy.
The list contains the addresses of one or more interfaces
on this router. If an interface address is included in
the list, this policy applies to RIP advertisements
received on that interface.
If set to '0', this policy applies to RIP updates
received on any interface.rwdeprecated INTEGER .1.3.6.1.4.1.2272.1.8.11.12.1.7 |
rcIpPolicyRipAcceptPrecedenceIs used while comparing this policy rule with other
policy that a given route may match. A rule with a
higher precedence value will be chosen over one with
a smaller value. In the case of a tie, the PolicyId is
used (larger wins).rwdeprecated INTEGER .1.3.6.1.4.1.2272.1.8.11.12.1.8 |
rcIpPolicyRipAcceptActionIt indicates whether the route should be acceptd
or not.rwdeprecated Enumeration .1.3.6.1.4.1.2272.1.8.11.12.1.9 |
rcIpPolicyRipAcceptInjectNetListIdUsed to indicate the ListId of the InjectNetList
in the rcIpPolicyListTable entry that is assiciated
with for this policy. If teh action is 'accept' and if it
is desired to insert networks into the routing table that
differ from the actual advertised network. For instance,
if a number of networks in a certain range are learned
and an aggregate advertisement could be inserted instead
of the individual networks.
Upon receiving a route that matches this policy, all
networks in this list will be considered for inclusion
in the routing table. If the list is empty or if the
value of the ListId is '0' then the actual received
network is considered.
An encoding of 255.255.255.255/255.255.255.255 means
'match the actual received network.'. This allows
insertion of an aggregate or default along with the
actual netowrk.rwdeprecated INTEGER .1.3.6.1.4.1.2272.1.8.11.12.1.10 |
rcIpPolicyRipAcceptApplyMaskIf the 'action' is set to 'accept' and the actual
received network will be considered, this is an
optional IP address mask that will be applied to the
network number from the RIP update. This is used to
override the interface's subnet mask in the presence
of networks with variable length subnet masks.rwdeprecated IpAddress .1.3.6.1.4.1.2272.1.8.11.12.1.11 |
rcIpPolicyRipAcceptRowStatusRow status of this entry.rwdeprecated RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.11.12.1.12 |
rcIpPolicyOspfAcceptTableSizeUsed to indicate the number of entries in the
rcIpPolicyOspfAcceptTable.rodeprecated Integer32 .1.3.6.1.4.1.2272.1.8.11.13 |
rcIpPolicyOspfAcceptTableA table used to store set of accept policies
configured for RIP routing protocol. The Number
of entries is given by rcIpPolicyNumRipPolicies.deprecated SEQUENCE OF RcIpPolicyOspfAcceptEntry .1.3.6.1.4.1.2272.1.8.11.14 |
rcIpPolicyOspfAcceptEntryEntry containing configuration information for a
particular accept policy.deprecated RcIpPolicyOspfAcceptEntry .1.3.6.1.4.1.2272.1.8.11.14.1 |
rcIpPolicyOspfAcceptIdA value that uniquely identifies the policy
associated with this entry.rodeprecated INTEGER .1.3.6.1.4.1.2272.1.8.11.14.1.1 |
rcIpPolicyOspfAcceptNameAn administratively-assigned name for this policy.rwdeprecated DisplayString .1.3.6.1.4.1.2272.1.8.11.14.1.2 |
rcIpPolicyOspfAcceptEnableIt indicates whether this policy is enabled or not.
The policy should be applied only if it is set to 'true'.rwdeprecated TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.11.14.1.3 |
rcIpPolicyOspfAcceptExactNetListIdUsed to indicate the number of 'exact' type entries
that are configured for this policy.
An entry with type 'exactNet' or 'rangeNet' represents
the network list. This indicates which networks will
match a particular accept policy.
An entry with a 'exact' type means to only match the
specific network advertisement (netaddr & mask).
An 'exact' entry with addr=0.0.0.0 and mask=0.0.0.0
means 'match the default route'.rwdeprecated INTEGER .1.3.6.1.4.1.2272.1.8.11.14.1.4 |
rcIpPolicyOspfAcceptRangeNetListIdUsed to indicate zero or more 'range' network entries
that are associated with this policy.
An entry with a 'range' type means to match any network
number that falls in the range indicated by the addr &
mask.
A 'range' entry with addr=0.0.0.0 and mask=0.0.0.0
means 'match any route'.
A null list means 'match any route'.rwdeprecated INTEGER .1.3.6.1.4.1.2272.1.8.11.14.1.5 |
rcIpPolicyOspfAcceptPrecedenceIs used while comparing this policy rule with other
policy that a given route may match. A rule with a
higher precedence value will be chosen over one with
a smaller value. In the case of a tie, the PolicyId is
used (larger wins).rwdeprecated INTEGER .1.3.6.1.4.1.2272.1.8.11.14.1.6 |
rcIpPolicyOspfAcceptActionIt indicates whether the route should be acceptd
or not.rwdeprecated Enumeration .1.3.6.1.4.1.2272.1.8.11.14.1.7 |
rcIpPolicyOspfAcceptInjectNetListIdUsed to indicate the ListId of the InjectNetList
in the rcIpPolicyListTable entry that is assiciated
with for this policy. If teh action is 'accept' and if it
is desired to insert networks into the routing table that
differ from the actual advertised network. For instance,
if a number of networks in a certain range are learned
and an aggregate advertisement could be inserted instead
of the individual networks.
Upon receiving a route that matches this policy, all
networks in this list will be considered for inclusion
in the routing table. If the list is empty or if the
value of the ListId is '0' then the actual received
network is considered.
An encoding of 255.255.255.255/255.255.255.255 means
'match the actual received network.'. This allows
insertion of an aggregate or default along with the
actual netowrk.rwdeprecated INTEGER .1.3.6.1.4.1.2272.1.8.11.14.1.8 |
rcIpPolicyOspfAcceptExtTypeUsed to indicate the ospf external type. This
parameter describes which types of OSPF ASE routes
match this policy.
'any' means 'match either ASE type 1 or 2'.
'type1' means 'match any external type 1'.
'type2' means 'match any external type 2rwdeprecated Enumeration .1.3.6.1.4.1.2272.1.8.11.14.1.9 |
rcIpPolicyOspfAcceptRowStatusRow status of this entry.rwdeprecated RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.11.14.1.10 |
rcIpPolicyNetListTableSizeUsed to indicate the number of entries in the
rcIpPolicyNetListTable.rodeprecated Integer32 .1.3.6.1.4.1.2272.1.8.11.15 |
rcIpPolicyNetListTableA table used to group rcIpPolicyAddrEntry(s)
into a list.deprecated SEQUENCE OF RcIpPolicyNetListEntry .1.3.6.1.4.1.2272.1.8.11.16 |
rcIpPolicyNetListEntryRoute entry attributes.deprecated RcIpPolicyNetListEntry .1.3.6.1.4.1.2272.1.8.11.16.1 |
rcIpPolicyNetListIdA value that uniquely identifies this list of
rcIpPolicyNetListEntry.rodeprecated INTEGER .1.3.6.1.4.1.2272.1.8.11.16.1.1 |
rcIpPolicyNetListNameAn administratively-assigned name for this list.rwdeprecated DisplayString .1.3.6.1.4.1.2272.1.8.11.16.1.3 |
rcIpPolicyNetListIdListSizeUsed to indicate the number of rcIpPolicyNetEntry
id(s) in the rcIpPolicyNetListIdList variable.rodeprecated INTEGER .1.3.6.1.4.1.2272.1.8.11.16.1.4 |
rcIpPolicyNetListIdListUsed to indicate zero or more NetListId that
are associated to this list. Each NetList identifier
is stored as two bytes in this array starting from
offset zero. Any unused bytes should be set to zero.rwdeprecated OCTET STRING .1.3.6.1.4.1.2272.1.8.11.16.1.5 |
rcIpPolicyNetListPolicyIdListSizeUsed to indicate the number of policy id(s) in the
Policy Id list. That are referring to this list.rodeprecated INTEGER .1.3.6.1.4.1.2272.1.8.11.16.1.6 |
rcIpPolicyNetListPolicyIdListUsed to indicate zero or more policies that
are referring to this entry. Each policy identifier
is stored as two bytes in this array starting from
offset zero. Any unused bytes should be set to zero.rodeprecated OCTET STRING .1.3.6.1.4.1.2272.1.8.11.16.1.7 |
rcIpPolicyNetListRowStatusRow status of this entry.rwdeprecated RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.11.16.1.8 |
rcIpAsPathAccessListTableSizetable sizero Integer32 .1.3.6.1.4.1.2272.1.8.100.1 |
rcIpAsPathAccessListTableIP As Path Access List table SEQUENCE OF RcIpAsPathAccessListEntry .1.3.6.1.4.1.2272.1.8.100.2 |
rcIpAsPathAccessListEntryAn entry of Ip As Path Access List Table. RcIpAsPathAccessListEntry .1.3.6.1.4.1.2272.1.8.100.2.1 |
rcIpAsPathAccessListIdPath Access List entry Id.ro INTEGER .1.3.6.1.4.1.2272.1.8.100.2.1.1 |
rcIpAsPathAccessListMemberIdfrq. at which hello sent.ro INTEGER .1.3.6.1.4.1.2272.1.8.100.2.1.2 |
rcIpAsPathAccessListModePath Access List Mode, permit or deny.rw Enumeration .1.3.6.1.4.1.2272.1.8.100.2.1.3 |
rcIpAsPathAccessListAsRegularExpressionIP Path Access List Regular Expressionrw OCTET STRING .1.3.6.1.4.1.2272.1.8.100.2.1.4 |
rcIpAsPathAccessListRowStatusTable row status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.100.2.1.5 |
rcIpCommunityAccessListTableSizetable sizero Integer32 .1.3.6.1.4.1.2272.1.8.100.3 |
rcIpCommunityAccessListTableIP CommunityAccess List table SEQUENCE OF RcIpCommunityAccessListEntry .1.3.6.1.4.1.2272.1.8.100.4 |
rcIpCommunityAccessListEntryAn entry of Ip CommunityAccess List Table. RcIpCommunityAccessListEntry .1.3.6.1.4.1.2272.1.8.100.4.1 |
rcIpCommunityAccessListIdIP CommunityAccess entry List Idro INTEGER .1.3.6.1.4.1.2272.1.8.100.4.1.1 |
rcIpCommunityAccessListMemberIdfrq. at which hello sent.ro INTEGER .1.3.6.1.4.1.2272.1.8.100.4.1.2 |
rcIpCommunityAccessListModeIP Community Access List Mode, permit or deny.rw Enumeration .1.3.6.1.4.1.2272.1.8.100.4.1.3 |
rcIpCommunityAccessListCommunityIP Community Access List Community string.rw OCTET STRING .1.3.6.1.4.1.2272.1.8.100.4.1.4 |
rcIpCommunityAccessListRowStatusIP Community Access Table Row Status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.100.4.1.5 |
rcIpAccessListTableSizetable sizero Integer32 .1.3.6.1.4.1.2272.1.8.100.5 |
rcIpAccessListTableIP Access List table SEQUENCE OF RcIpAccessListEntry .1.3.6.1.4.1.2272.1.8.100.6 |
rcIpAccessListEntryAn entry of Ip Access List Table. RcIpAccessListEntry .1.3.6.1.4.1.2272.1.8.100.6.1 |
rcIpAccessListIdro INTEGER .1.3.6.1.4.1.2272.1.8.100.6.1.1 |
rcIpAccessListModero Enumeration .1.3.6.1.4.1.2272.1.8.100.6.1.2 |
rcIpAccessListNetworkrw IpAddress .1.3.6.1.4.1.2272.1.8.100.6.1.3 |
rcIpAccessListNetworkMaskrw IpAddress .1.3.6.1.4.1.2272.1.8.100.6.1.4 |
rcIpAccessListNamerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.100.6.1.5 |
rcIpAccessListRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.100.6.1.6 |
rcIpExtendedAccessListTableSizetable sizero Integer32 .1.3.6.1.4.1.2272.1.8.100.7 |
rcIpExtendedAccessListTableIP Extended Access List table SEQUENCE OF RcIpExtendedAccessListEntry .1.3.6.1.4.1.2272.1.8.100.8 |
rcIpExtendedAccessListEntryAn entry of Ip Extended Access List Table. RcIpExtendedAccessListEntry .1.3.6.1.4.1.2272.1.8.100.8.1 |
rcIpExtendedAccessListIdro INTEGER .1.3.6.1.4.1.2272.1.8.100.8.1.1 |
rcIpExtendedAccessListModero Enumeration .1.3.6.1.4.1.2272.1.8.100.8.1.2 |
rcIpExtendedAccessListNetworkro IpAddress .1.3.6.1.4.1.2272.1.8.100.8.1.3 |
rcIpExtendedAccessListNetworkWildCardro IpAddress .1.3.6.1.4.1.2272.1.8.100.8.1.4 |
rcIpExtendedAccessListNetworkMaskro IpAddress .1.3.6.1.4.1.2272.1.8.100.8.1.5 |
rcIpExtendedAccessListNetworkMaskWildCardro IpAddress .1.3.6.1.4.1.2272.1.8.100.8.1.6 |
rcIpExtendedAccessListNamerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.100.8.1.7 |
rcIpExtendedAccessListRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.100.8.1.8 |
rcIpPrefixListTableSizetable sizero Integer32 .1.3.6.1.4.1.2272.1.8.100.9 |
rcIpPrefixListTableIP Prefix List table SEQUENCE OF RcIpPrefixListEntry .1.3.6.1.4.1.2272.1.8.100.10 |
rcIpPrefixListEntryAn entry of Ip Prefix List Table. RcIpPrefixListEntry .1.3.6.1.4.1.2272.1.8.100.10.1 |
rcIpPrefixListIdListIdro Integer32 .1.3.6.1.4.1.2272.1.8.100.10.1.1 |
rcIpPrefixListPrefixIs a member of a specific prefix list.
Adding the prefix to the given prefix listro IpAddress .1.3.6.1.4.1.2272.1.8.100.10.1.2 |
rcIpPrefixListPrefixMaskLenprefix mask lengthro INTEGER .1.3.6.1.4.1.2272.1.8.100.10.1.3 |
rcIpPrefixListMaskLenFromused with mask lenrw INTEGER .1.3.6.1.4.1.2272.1.8.100.10.1.4 |
rcIpPrefixListMaskLenUptoused with mask lenrw INTEGER .1.3.6.1.4.1.2272.1.8.100.10.1.5 |
rcIpPrefixListNamelist namerw DisplayString .1.3.6.1.4.1.2272.1.8.100.10.1.6 |
rcIpPrefixListRowStatusrow statusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.100.10.1.7 |
rcIpRoutePolicyTableSizetable sizero Integer32 .1.3.6.1.4.1.2272.1.8.100.11 |
rcIpRoutePolicyApplyrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.100.12 |
rcIpRoutePolicyTableIP Route Map table SEQUENCE OF RcIpRoutePolicyEntry .1.3.6.1.4.1.2272.1.8.100.13 |
rcIpRoutePolicyEntryAn entry of Ip Route Map Table. RcIpRoutePolicyEntry .1.3.6.1.4.1.2272.1.8.100.13.1 |
rcIpRoutePolicyIdIndex used to identify a group of policies in
the route policy tableRoute map idro Integer32 .1.3.6.1.4.1.2272.1.8.100.13.1.1 |
rcIpRoutePolicySequenceNumbersecond index used to identify a specific policy
with in the route policy group (grouped by Id).
This field allows users to specify different
MATCH, SET parameters and an action.ro Integer32 .1.3.6.1.4.1.2272.1.8.100.13.1.2 |
rcIpRoutePolicyNameIs used to group a set of policies with different
sequence number. Id & Name have one-on-one
relationship. Different policy groups can
contain same sequence number, whereas with in
a group the sequence number must be different.rw DisplayString .1.3.6.1.4.1.2272.1.8.100.13.1.3 |
rcIpRoutePolicyEnableValue specified here indicate whether
this policy is enabled or not. If
disabled policy sould not be used.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.100.13.1.4 |
rcIpRoutePolicyModespecifies the action to be taken when this
policy is selected for a specific route.
This can be permit or deny or continue.
Permit indicates allow the route, deny indicates
ignore the route. Continue means continue
checking the next match criteria set in the
next policy seq, if none take the default action
in the given context.rw Enumeration .1.3.6.1.4.1.2272.1.8.100.13.1.5 |
rcIpRoutePolicyMatchProtocolMatch protocol. Used for RIP and DVMRP announce policy only.
Value is one of multiple (logical 'OR) of the following values:
direct(1): enables direct match-protocol
static(2): enables static match-protocol
rip(4): enables rip match-protocol
ospf(8): enables ospf match-protocol
ebgp(16): enables ebgp match-protocol
dvmrp(32): enables dvmrp match-protocol
ibgp(64): enables ibgp match-protocol
isis(128): enables isis match-protocol
any(255): enables all match-protocolsrw INTEGER .1.3.6.1.4.1.2272.1.8.100.13.1.6 |
rcIpRoutePolicyMatchAsPathApplicable to BGP protocol only. Match the BGP
autonomous system path. This will override the
BGP neighbor filter list info.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.100.13.1.7 |
rcIpRoutePolicyMatchCommunityApplicable to BGP protocol only. Filter
incoming/outgoing updates based on communities.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.100.13.1.8 |
rcIpRoutePolicyMatchCommunityExactIf enabled indicates the match has be an exact
(i.e., all of the communities specified in the
path has to be matched).rw EnableValue (RAPID-CITY) .1.3.6.1.4.1.2272.1.8.100.13.1.9 |
rcIpRoutePolicyMatchNetworkcan specify one or more prefix list name or id(s)rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.100.13.1.10 |
rcIpRoutePolicyMatchIpRouteSourceIn case of Rip routes this is equivalent to
RipInterface. In case of DVMRP routes this is
equivalent to DVMRP gateway. Can specify one
or more prefix list name(s) or id(s) seperated by comma.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.100.13.1.11 |
rcIpRoutePolicyMatchNextHopIn case of Rip routes this is equivalent to
RipInterface. In case of DVMRP routes this is
equivalent to DVMRP gateway. Can specify one
or more prefix list name(s) or id(s) seperated by comma.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.100.13.1.12 |
rcIpRoutePolicyMatchInterfaceMatch received interface. Only for rip routes.
Ignored in all other cases.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.100.13.1.13 |
rcIpRoutePolicyMatchRouteTypeFor BGP this choice refers to locally generated
routes external routes learned via ebgp nbr. For
OSPF internal refers to intra and inter area
routes (belongs to local autonomous system).
External (type1|type2) refers to the routes
learned from other ASs and imported as either
type1 or type2. if type1/type2 is specified
then match only type1/type2.rw Enumeration .1.3.6.1.4.1.2272.1.8.100.13.1.14 |
rcIpRoutePolicyMatchMetricMatch mec field in the incoming advertisement.rw INTEGER .1.3.6.1.4.1.2272.1.8.100.13.1.15 |
rcIpRoutePolicyMatchTagspecifies a list of tag(s), that will be used
during the match criteria process.contains one
or more tag values..rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.100.13.1.16 |
rcIpRoutePolicySetRoutePreferenceif non-zero specifies the route preference
value to be assigned to the routes that applies
this policy.contains one or more tag values..rw INTEGER .1.3.6.1.4.1.2272.1.8.100.13.1.17 |
rcIpRoutePolicySetAsPathThe AS path vaule to be used whether the
SetAsPathMode is Tag or Prepend.as-path string..rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.100.13.1.18 |
rcIpRoutePolicySetAsPathModeIt can be either tag or prepend tag.
applicable only while redistributing routes to
BGP.Converts the tag of a route into AS path.rw Enumeration .1.3.6.1.4.1.2272.1.8.100.13.1.19 |
rcIpRoutePolicySetAutomaticTagrw EnableValue (RAPID-CITY) .1.3.6.1.4.1.2272.1.8.100.13.1.20 |
rcIpRoutePolicySetCommunityNumberthis value can be a number (1..42949672000)
or no-export or no-advertise. Applicable to
BGP advertisments.community number.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.100.13.1.21 |
rcIpRoutePolicySetCommunityModethis value can be either append or none
unchanged - keep the community attribute in the
route path as it is.
none - remove the community in the route path
additive - adds the community-number specified
in SetCommunityNumber to the
community list attribute. Applicable
to BGP advertisments.rw Enumeration .1.3.6.1.4.1.2272.1.8.100.13.1.22 |
rcIpRoutePolicySetMetricTypeInternalIndicates to set the MED value for routes
advertised to ebgp nbrs to the IGP metric value.rw Integer32 .1.3.6.1.4.1.2272.1.8.100.13.1.23 |
rcIpRoutePolicySetMetricValue of the metric to be used while sending an
update for the routes that match the matching
criteria in this route policy.
Default - 0 indicates the internal value defined
for protocolrw INTEGER .1.3.6.1.4.1.2272.1.8.100.13.1.24 |
rcIpRoutePolicySetMetricTypeMetric type for the routes to be imported into
OSPF routing protocol, which passed the matching
criteria configured in this route policy.rw Enumeration .1.3.6.1.4.1.2272.1.8.100.13.1.25 |
rcIpRoutePolicySetNextHopIpAddress of the next hop router. Ignored for
DVMRP routes.rw IpAddress .1.3.6.1.4.1.2272.1.8.100.13.1.26 |
rcIpRoutePolicySetOriginigp/egp/incomplete Applicable to BGP protocol
only. If not set uses the route origin from
the Ip routing table (protocol).rw Enumeration .1.3.6.1.4.1.2272.1.8.100.13.1.27 |
rcIpRoutePolicySetLocalPrefthis value will be used during route decision
process in the BGP protocol. Applicable to BGP
only.rw Integer32 .1.3.6.1.4.1.2272.1.8.100.13.1.28 |
rcIpRoutePolicySetOriginEgpAsindicates the Remote autonomous sys number.
Applicable to BGP only.rw Integer32 .1.3.6.1.4.1.2272.1.8.100.13.1.29 |
rcIpRoutePolicySetTagValue to be used for setting tag of the
destination routing protocol. If not specified
forward the tag value in the source routing
protocol. Value 0 indicates not setrw Integer32 .1.3.6.1.4.1.2272.1.8.100.13.1.30 |
rcIpRoutePolicySetWeightShould be using with match as-path condition.
Weight value for the routing table. For BGP
this value will override the weight configured
through NetworkTableEntry or FilterListWeight or
NeighborWeight. Used for BGP only.Value 0
indicates not setrw Integer32 .1.3.6.1.4.1.2272.1.8.100.13.1.31 |
rcIpRoutePolicySetInjectNetListspecifies the prefix list to be used either
for injecting the routes into the routing
table or to include the networks in the
advertisement. Ignored for DVMRP.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.100.13.1.32 |
rcIpRoutePolicyRowStatusrow statusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.100.13.1.33 |
rcIpRoutePolicySetMaskSet Mask Ip Addressrw IpAddress .1.3.6.1.4.1.2272.1.8.100.13.1.34 |
rcIpRoutePolicyNssaPbitSet/Reset P bit in specified type 7 LSA.
By default P bit is always set in case user
set it to disable state for particular route
policy than all type 7 LSAs associated with
that route policy will have P bit cleared,
with this intact NSSA ABR will not perform
translation of these LSAs to type 5.rw EnableValue (RAPID-CITY) .1.3.6.1.4.1.2272.1.8.100.13.1.35 |
rcIpRedistributeTableSizetable sizero Integer32 .1.3.6.1.4.1.2272.1.8.100.14 |
rcIpRedistributeApplyrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.100.15 |
rcIpRedistributeTableIP Redistribute table SEQUENCE OF RcIpRedistributeEntry .1.3.6.1.4.1.2272.1.8.100.16 |
rcIpRedistributeEntryAn entry of Ip Redistribute Table. RcIpRedistributeEntry .1.3.6.1.4.1.2272.1.8.100.16.1 |
rcIpRedistributeProtocolProtocol is any one of the dynamic routing
protocol, which is interested in receiving
the external routing info.ro Enumeration .1.3.6.1.4.1.2272.1.8.100.16.1.1 |
rcIpRedistributeRouteSourceequivalent to the owner field in the routing
table. This field indicates that the protocol
is interested in knowing/not-knowing the routes
learned from this source.ro Enumeration .1.3.6.1.4.1.2272.1.8.100.16.1.2 |
rcIpRedistributeEnableEnable/Disable. By default this is enabled.rw EnableValue (RAPID-CITY) .1.3.6.1.4.1.2272.1.8.100.16.1.3 |
rcIpRedistributeMetricValue of the metric to be announced in the advertisement.
The range specified for ISIS is for other protocols that range
between (0 .. 65535)rw INTEGER .1.3.6.1.4.1.2272.1.8.100.16.1.4 |
rcIpRedistributeMetricTypespecifies the type of the metric type, useful
for ISIS, OSPF and BGP only. In case of ISIS
type1 is treated as internal and type2 is
treated as external.rw Enumeration .1.3.6.1.4.1.2272.1.8.100.16.1.5 |
rcIpRedistributeMatchRouteTypeused to filter a route based on the route type.
applicable to BGP.rw Enumeration .1.3.6.1.4.1.2272.1.8.100.16.1.6 |
rcIpRedistributeSetTagTag value to be set in the advertisment.rw Integer32 .1.3.6.1.4.1.2272.1.8.100.16.1.7 |
rcIpRedistributeSubnetsapplicable to OSPF only. Indicates that all the
subnets need to be advertised individually.rw Enumeration .1.3.6.1.4.1.2272.1.8.100.16.1.8 |
rcIpRedistributeRoutePolicyspecify the route policy to achieve the final
granularity in filtering to determine whether
or not a specific route should be advertised
to the given protocol.Route map namerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.100.16.1.9 |
rcIpRedistributeASNumberAutonomous system number. Used only for the
BGP protocol.rw Integer32 .1.3.6.1.4.1.2272.1.8.100.16.1.10 |
rcIpRedistributeWeightused only for the BGP protocol.rw Integer32 .1.3.6.1.4.1.2272.1.8.100.16.1.11 |
rcIpRedistributeDefaultOriginateindicates the given protocol will
originate/advertise a default route.rw Integer32 .1.3.6.1.4.1.2272.1.8.100.16.1.12 |
rcIpRedistributeRowStatusrow statusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.100.16.1.13 |
rcIpRedistributeLevelThis is for ISIS. This sets the redistribute
level only. Set this to level2 to distribute the routes in
L2 LSPs. If the router is at level1 then setting redistribute
at level2 does not have any significance.rw Enumeration .1.3.6.1.4.1.2272.1.8.100.16.1.14 |
rcIpOspfInFilterTableSizetable sizero Integer32 .1.3.6.1.4.1.2272.1.8.100.17 |
rcIpOspfInFilterApplyrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.100.18 |
rcIpOspfInFilterTableIP Ospf In Filter table SEQUENCE OF RcIpOspfInFilterEntry .1.3.6.1.4.1.2272.1.8.100.19 |
rcIpOspfInFilterEntryAn entry of Ip Ospf In Filter Table. RcIpOspfInFilterEntry .1.3.6.1.4.1.2272.1.8.100.19.1 |
rcIpOspfInFilterAdvertisingRtrro IpAddress .1.3.6.1.4.1.2272.1.8.100.19.1.1 |
rcIpOspfInFilterEnableIfIndexrw EnableValue (RAPID-CITY) .1.3.6.1.4.1.2272.1.8.100.19.1.2 |
rcIpOspfInFilterMetricTyperw Enumeration .1.3.6.1.4.1.2272.1.8.100.19.1.3 |
rcIpOspfInFilterPolicyNamerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.100.19.1.4 |
rcIpOspfInFilterRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.100.19.1.5 |
rcIpRoutePrefTableSizetable sizero Integer32 .1.3.6.1.4.1.2272.1.8.100.20 |
rcIpRoutePrefTableIP Route Pref table SEQUENCE OF RcIpRoutePrefEntry .1.3.6.1.4.1.2272.1.8.100.21 |
rcIpRoutePrefEntryAn entry of Ip Route Pref Table. RcIpRoutePrefEntry .1.3.6.1.4.1.2272.1.8.100.21.1 |
rcIpRoutePrefProtocolProtocolro Enumeration .1.3.6.1.4.1.2272.1.8.100.21.1.1 |
rcIpRoutePrefDefaultShows the default preference value for the given
protocol.ro INTEGER .1.3.6.1.4.1.2272.1.8.100.21.1.2 |
rcIpRoutePrefConfiguredThis value is configurable by the userrw INTEGER .1.3.6.1.4.1.2272.1.8.100.21.1.3 |