RC-2K-MIB
Enterprise MIB for the rc2k.
Main OID:
rc2kMib.1.3.6.1.4.1.2272.1.100.0
218
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
218 total| Object Name |
|---|
rc2kMibEnterprise MIB for the rc2k. MODULE-IDENTITY .1.3.6.1.4.1.2272.1.100.0 |
rc2kChassis OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.100.1 |
rc2kChassisPortOperStatusA bit array that contains the oper-status
of the ports in the device. 2 bits are used
for each port. The high order 2 bits of the
first octet represent port #0, the next two
bits are used for port #1, etc. The status
is encoded with the following scheme :
value meaning
-
0 no-link (admin=up, oper=down)
1 up (admin=up, oper=up)
2 down (admin=down, oper=down)
3 testing (admin=test, oper=test)ro OCTET STRING .1.3.6.1.4.1.2272.1.100.1.1 |
rc2kChassisTemperatureUsed to indicate the core operating temperature
of the chassis. This value represents the degree
in celsius of the air inside the chassis.ro Gauge32 .1.3.6.1.4.1.2272.1.100.1.2 |
rc2kChassisAmbientLowerTemperatureUsed to indicate the temperature of the air
entering the fan at the lower half of the chassis.roobsolete Gauge32 .1.3.6.1.4.1.2272.1.100.1.3 |
rc2kChassisAmbientUpperTemperatureUsed to indicate the temperature of the air
entering the fan at the upper half of the chassis.roobsolete Gauge32 .1.3.6.1.4.1.2272.1.100.1.4 |
rc2kChassisBaseMacAddrbase mac addrro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2272.1.100.1.5 |
rc2kChassisMacAddrCapacityMac Address Capacityro Integer32 .1.3.6.1.4.1.2272.1.100.1.6 |
rc2kChassisPbtMacAddrpbt mac addrro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2272.1.100.1.7 |
rc2kChassisUserLabel1user defined management information. This can be used to
provide extra information about the chassis. Syntax can be
as expected by the management systemrw DisplayString .1.3.6.1.4.1.2272.1.100.1.8 |
rc2kChassisPbtMacAddrListList of 8 Pbt Mac addresses. The first Pbt Mac Address
is rc2kChassisPbtMacAddr. The other 7 Pbt Mac Addresses
are derived by increment 1 to the previous mac sequencially
start from rc2kChassisPbtMacAddrro OCTET STRING .1.3.6.1.4.1.2272.1.100.1.9 |
rc2kCpuEthernetPortTable2k CPU Ethernet Port table SEQUENCE OF Rc2kCpuEthernetPortEntry .1.3.6.1.4.1.2272.1.100.2 |
rc2kCpuEthernetPortEntryEntry containing infomation of 2k CPU Ethernet Port Rc2kCpuEthernetPortEntry .1.3.6.1.4.1.2272.1.100.2.1 |
rc2kCpuEthernetPortIfIndexIfIndex of the port.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2272.1.100.2.1.1 |
rc2kCpuEthernetPortDescrPort descriptionro DisplayString .1.3.6.1.4.1.2272.1.100.2.1.2 |
rc2kCpuEthernetPortAdminStatusUsed to configure the admininstrative status
of the port.rw Enumeration .1.3.6.1.4.1.2272.1.100.2.1.3 |
rc2kCpuEthernetPortOperStatusUsed to indicate the administrative status
of the port.ro Enumeration .1.3.6.1.4.1.2272.1.100.2.1.4 |
rc2kCpuEthernetPortAddrUsed to configure the port's IP addressrw IpAddress .1.3.6.1.4.1.2272.1.100.2.1.5 |
rc2kCpuEthernetPortMaskUsed to configure the port's net maskrw IpAddress .1.3.6.1.4.1.2272.1.100.2.1.6 |
rc2kCpuEthernetPortGatewayUsed to configure the the IP address of the
gateway that should be used to forward IP
traffic.rw IpAddress .1.3.6.1.4.1.2272.1.100.2.1.7 |
rc2kCpuEthernetPortNetworkUsed to configure the network that can be
used to remotely manage this device.rw IpAddress .1.3.6.1.4.1.2272.1.100.2.1.8 |
rc2kCpuEthernetPortAutoNegotiateUsed to configure auto-negotiation on this
port.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.100.2.1.9 |
rc2kCpuEthernetPortAdminDuplexUsed to configure the administrative duplex
setting for this port.rw Enumeration .1.3.6.1.4.1.2272.1.100.2.1.10 |
rc2kCpuEthernetPortOperDuplexUsed to indicate the operational duplex
setting for this port.ro Enumeration .1.3.6.1.4.1.2272.1.100.2.1.11 |
rc2kCpuEthernetPortAdminSpeedUsed to configure the administrative speed
setting for this port.rw Enumeration .1.3.6.1.4.1.2272.1.100.2.1.12 |
rc2kCpuEthernetPortOperSpeedUsed to indicate the operational duplex
setting for this port.ro Enumeration .1.3.6.1.4.1.2272.1.100.2.1.13 |
rc2kCpuEthernetPortEnableBootpUsed to enable/disable the Bootp feature
on this port.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.100.2.1.14 |
rc2kCpuEthernetPortMgmtMacAddrUsed to indicate the mac addr for this port.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2272.1.100.2.1.15 |
rc2kCpuSerialPortTable2k CPU Serial Port table SEQUENCE OF Rc2kCpuSerialPortEntry .1.3.6.1.4.1.2272.1.100.3 |
rc2kCpuSerialPortEntryEntry containing infomation of 2k CPU Serial Port Rc2kCpuSerialPortEntry .1.3.6.1.4.1.2272.1.100.3.1 |
rc2kCpuSerialPortIfIndexIfIndex for this port.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2272.1.100.3.1.1 |
rc2kCpuSerialPortDescrPort description.ro DisplayString .1.3.6.1.4.1.2272.1.100.3.1.2 |
rc2kCpuSerialPortModeUsed to configure the mode this port should
operate in.rw Enumeration .1.3.6.1.4.1.2272.1.100.3.1.3 |
rc2kCpuSerialPortAdminStatusUsed to configure the administrative status
setting for this port.rw Enumeration .1.3.6.1.4.1.2272.1.100.3.1.4 |
rc2kCpuSerialPortOperStatusUsed to indicate the operational status
setting for this port.ro Enumeration .1.3.6.1.4.1.2272.1.100.3.1.5 |
rc2kCpuSerialPortBaudRateUsed to configure the baud rate of this port.rw Enumeration .1.3.6.1.4.1.2272.1.100.3.1.6 |
rc2kCpuSerialPortDataBitsUsed to configure the number of data bits, per
byte of data, this port should send/receive.rw Enumeration .1.3.6.1.4.1.2272.1.100.3.1.7 |
rc2kCpuSerialPortMyAddrUsed to configure this port's IP address.
Used for both 'slip' and 'ppp' modes.rw IpAddress .1.3.6.1.4.1.2272.1.100.3.1.8 |
rc2kCpuSerialPortPeerAddrUsed to configure the peer's IP address.
Used for both 'slip' and 'ppp' modes.rw IpAddress .1.3.6.1.4.1.2272.1.100.3.1.9 |
rc2kCpuSerialPortSlipMtuUsed to configure the MTU for this port.
Used for slip only.rw INTEGER .1.3.6.1.4.1.2272.1.100.3.1.10 |
rc2kCpuSerialPortSlipTxRxCompressUsed to enable/disable compression of TCP/IP
packet headers on this port. Used for slip only.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.100.3.1.11 |
rc2kCpuSerialPortSlipRxCompressUsed to enable/disable compression for receiving
packets on this port. Used for slip only.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.100.3.1.12 |
rc2kCpuSerialPortPppConfigFileUsed to configure the configuration file to use
for PPP.rw OCTET STRING .1.3.6.1.4.1.2272.1.100.3.1.13 |
rc2kDevice OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.100.4 |
rc2kDeviceGlobalTable2k CPU Ethernet Port table SEQUENCE OF Rc2kDeviceGlobalEntry .1.3.6.1.4.1.2272.1.100.4.1 |
rc2kDeviceGlobalEntryEntry containing infomation of 2k CPU Ethernet Port Rc2kDeviceGlobalEntry .1.3.6.1.4.1.2272.1.100.4.1.1 |
rc2kDeviceGlobalSlotslot numberro INTEGER .1.3.6.1.4.1.2272.1.100.4.1.1.1 |
rc2kDeviceGlobalFlashBytesUsedbytes usedro Integer32 .1.3.6.1.4.1.2272.1.100.4.1.1.2 |
rc2kDeviceGlobalFlashBytesFreebytes freero Integer32 .1.3.6.1.4.1.2272.1.100.4.1.1.3 |
rc2kDeviceGlobalFlashNumFiles# files in flashro Integer32 .1.3.6.1.4.1.2272.1.100.4.1.1.4 |
rc2kDeviceGlobalPcmciaBytesUsedbytes usedro Integer32 .1.3.6.1.4.1.2272.1.100.4.1.1.5 |
rc2kDeviceGlobalPcmciaBytesFreebytes freero Integer32 .1.3.6.1.4.1.2272.1.100.4.1.1.6 |
rc2kDeviceGlobalPcmciaNumFiles# files in pcmciaro Integer32 .1.3.6.1.4.1.2272.1.100.4.1.1.7 |
rc2kDeviceGlobalActionnone(1), resetPcmcia(2), ..rw Enumeration .1.3.6.1.4.1.2272.1.100.4.1.1.8 |
rc2kDeviceGlobalResultUsed to indicate the result of the last action
performed on one of the system's device.ro Enumeration .1.3.6.1.4.1.2272.1.100.4.1.1.9 |
rc2kDeviceGlobalFlash1BytesUsedbytes usedro Integer32 .1.3.6.1.4.1.2272.1.100.4.1.1.10 |
rc2kDeviceGlobalFlash1BytesFreebytes freero Integer32 .1.3.6.1.4.1.2272.1.100.4.1.1.11 |
rc2kDeviceGlobalFlash1NumFiles# files in flashro Integer32 .1.3.6.1.4.1.2272.1.100.4.1.1.12 |
rc2kDeviceSeparator1This leaf is used to provide a separation between
tables. No meaningful information is stored in this
variable.ro Integer32 .1.3.6.1.4.1.2272.1.100.4.2 |
rc2kDeviceFlashFileTable2k Flash table SEQUENCE OF Rc2kDeviceFlashFileEntry .1.3.6.1.4.1.2272.1.100.4.3 |
rc2kDeviceFlashFileEntryEntry containing infomation of 2k CPU Serial Port Rc2kDeviceFlashFileEntry .1.3.6.1.4.1.2272.1.100.4.3.1 |
rc2kDeviceFlashFileSlotslot numberro INTEGER .1.3.6.1.4.1.2272.1.100.4.3.1.1 |
rc2kDeviceFlashFileNamename of filero DisplayString .1.3.6.1.4.1.2272.1.100.4.3.1.2 |
rc2kDeviceFlashFileDatedatero DisplayString .1.3.6.1.4.1.2272.1.100.4.3.1.3 |
rc2kDeviceFlashFileSizesize in bytesro Integer32 .1.3.6.1.4.1.2272.1.100.4.3.1.4 |
rc2kDevicePcmciaPresentpcmcia is a slower device. This leaf is used to
stop the access into pcmcia file table when it
got the end of flash file table.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.100.4.4 |
rc2kDevicePcmciaFileTable2k PCMCIA table SEQUENCE OF Rc2kDevicePcmciaFileEntry .1.3.6.1.4.1.2272.1.100.4.5 |
rc2kDevicePcmciaFileEntryEntry containing infomation of 2k CPU Serial Port Rc2kDevicePcmciaFileEntry .1.3.6.1.4.1.2272.1.100.4.5.1 |
rc2kDevicePcmciaFileSlotslot numberro INTEGER (3 | 5..6) .1.3.6.1.4.1.2272.1.100.4.5.1.1 |
rc2kDevicePcmciaFileNamename of filero DisplayString .1.3.6.1.4.1.2272.1.100.4.5.1.2 |
rc2kDevicePcmciaFileDatedatero DisplayString .1.3.6.1.4.1.2272.1.100.4.5.1.3 |
rc2kDevicePcmciaFileSizesize in bytesro Integer32 .1.3.6.1.4.1.2272.1.100.4.5.1.4 |
rc2kDeviceSeparator2This leaf is used to provide a separation between
tables. No meaningful information is stored in this
variable.ro Integer32 .1.3.6.1.4.1.2272.1.100.4.6 |
rc2kDeviceFlash1PresentThis leaf is used to stop the access into Flash1
file table.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.100.4.7 |
rc2kDeviceFlash1FileTable2k Flash1 table SEQUENCE OF Rc2kDeviceFlash1FileEntry .1.3.6.1.4.1.2272.1.100.4.8 |
rc2kDeviceFlash1FileEntryEntry containing infomation of 2k Flash1 Files Rc2kDeviceFlash1FileEntry .1.3.6.1.4.1.2272.1.100.4.8.1 |
rc2kDeviceFlash1FileSlotslot numberro INTEGER .1.3.6.1.4.1.2272.1.100.4.8.1.1 |
rc2kDeviceFlash1FileNamename of filero DisplayString .1.3.6.1.4.1.2272.1.100.4.8.1.2 |
rc2kDeviceFlash1FileDatedatero DisplayString .1.3.6.1.4.1.2272.1.100.4.8.1.3 |
rc2kDeviceFlash1FileSizesize in bytesro Integer32 .1.3.6.1.4.1.2272.1.100.4.8.1.4 |
rc2kBootConfigTable2k Boot Configuration table SEQUENCE OF Rc2kBootConfigEntry .1.3.6.1.4.1.2272.1.100.5 |
rc2kBootConfigEntryEntry containing boot configuration information. Rc2kBootConfigEntry .1.3.6.1.4.1.2272.1.100.5.1 |
rc2kBootConfigSlotslot number, tattoo use 3 as cpu slot,
4 & 7-10 are not valid cpu slot numberro INTEGER .1.3.6.1.4.1.2272.1.100.5.1.1 |
rc2kBootConfigLastBootConfigSourceboot config sourcero DisplayString .1.3.6.1.4.1.2272.1.100.5.1.2 |
rc2kBootConfigLastRuntimeImageSourceruntime image sourcero DisplayString .1.3.6.1.4.1.2272.1.100.5.1.3 |
rc2kBootConfigLastRuntimeConfigSourceruntime config sourcero DisplayString .1.3.6.1.4.1.2272.1.100.5.1.4 |
rc2kBootConfigPrimaryImageSourceimage sourcerw DisplayString .1.3.6.1.4.1.2272.1.100.5.1.5 |
rc2kBootConfigPrimaryConfigSourceconfig sourcerw DisplayString .1.3.6.1.4.1.2272.1.100.5.1.6 |
rc2kBootConfigSecondaryImageSourceimage sourcerw DisplayString .1.3.6.1.4.1.2272.1.100.5.1.7 |
rc2kBootConfigSecondaryConfigSourceconfig sourcerw DisplayString .1.3.6.1.4.1.2272.1.100.5.1.8 |
rc2kBootConfigTertiaryImageSourceimage sourcerw DisplayString .1.3.6.1.4.1.2272.1.100.5.1.9 |
rc2kBootConfigTertiaryConfigSourceconfig sourcerw DisplayString .1.3.6.1.4.1.2272.1.100.5.1.10 |
rc2kBootConfigEnableAutoBootauto boot moderw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.100.5.1.11 |
rc2kBootConfigEnableFactoryDefaultsuse factory defaultrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.100.5.1.12 |
rc2kBootConfigEnableDebugModedebug moderw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.100.5.1.13 |
rc2kBootConfigEnableHwWatchDogTimerhw watch dog timerrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.100.5.1.14 |
rc2kBootConfigEnableRebootOnErrorreboot on errorrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.100.5.1.15 |
rc2kBootConfigEnableTelnetServertelnet serverrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.100.5.1.16 |
rc2kBootConfigEnableRloginServerrlogin serverrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.100.5.1.17 |
rc2kBootConfigEnableFtpServerftp serverrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.100.5.1.18 |
rc2kBootConfigEnableTftpServertftp serverrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.100.5.1.19 |
rc2kBootConfigSwVersioncurrent sw versionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2272.1.100.5.1.20 |
rc2kBootConfigMulticastConfigProfilemulticast configro INTEGER .1.3.6.1.4.1.2272.1.100.5.1.21 |
rc2kBootConfigEnableSshServerssh serverrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.100.5.1.22 |
rc2kBootConfigEnableAltLedBoot flag for enableing Alternate LEDrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.100.5.1.23 |
rc2kBootConfigPrimaryBackupConfigSourceprimary backup config source (save config)rw DisplayString .1.3.6.1.4.1.2272.1.100.5.1.24 |
rc2kBootConfigSecondaryBackupConfigSourcesecondary backup config source (save config)rw DisplayString .1.3.6.1.4.1.2272.1.100.5.1.25 |
rc2kBootConfigTertiaryBackupConfigSourcetertiary backup config source (save config)rw DisplayString .1.3.6.1.4.1.2272.1.100.5.1.26 |
rc2kBootConfigEnable8616ReAutonegEnable re-autoneg for 8616SX Cards (Intel GMAC fix)rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.100.5.1.27 |
rc2kBootConfigMezzImageSourceMezz image sourcerw DisplayString .1.3.6.1.4.1.2272.1.100.5.1.28 |
rc2kBootConfigEnableMezzEnable/disable Mezz Flagrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.100.5.1.29 |
rc2kBootConfigPrimaryLicenseSourcePrimary choice for the license sourcerw DisplayString .1.3.6.1.4.1.2272.1.100.5.1.30 |
rc2kBootConfigSecondaryLicenseSourceSecondary choice for the license sourcerw DisplayString .1.3.6.1.4.1.2272.1.100.5.1.31 |
rc2kBootConfigTertiaryLicenseSourceTertiary choice for the license sourcerw DisplayString .1.3.6.1.4.1.2272.1.100.5.1.32 |
rc2kBootConfigUnknownDstMacDiscardEnable/disable to discard the unknown destination
mac address. A device reboot is required for the
change to take effect.rwobsolete TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.100.5.1.33 |
rc2kBootConfigUnknownDstMacDiscardOperStatusIndicates the device operational status of unknown
destination mac discard.roobsolete Enumeration .1.3.6.1.4.1.2272.1.100.5.1.34 |
rc2kBootConfigEnableAutoAssignIpEnable/disable auto-assign-ip featurerw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.100.5.1.35 |
rc2kBootConfigUpgradeBootImageSourceUpgrade boot image sourcerw DisplayString .1.3.6.1.4.1.2272.1.100.5.1.36 |
rc2kBootConfigUpgradeRuntimeImageSourceUpgrade runtime image sourcerw DisplayString .1.3.6.1.4.1.2272.1.100.5.1.37 |
rc2kBootConfigUpgradeMezzImageSourceUpgrade mezz image sourcerw DisplayString .1.3.6.1.4.1.2272.1.100.5.1.38 |
rc2kBootConfigUpgradeConfigSourceUpgrade config sourcerw DisplayString .1.3.6.1.4.1.2272.1.100.5.1.39 |
rc2kBootConfigUpgradeRModImageSourceupgrade RMod image sourcerw DisplayString .1.3.6.1.4.1.2272.1.100.5.1.40 |
rc2kBootConfigUpgradeRCModImageSourceupgrade RCMod image sourcerw DisplayString .1.3.6.1.4.1.2272.1.100.5.1.41 |
rc2kBootConfigUpgradeESMImageSourceupgrade ESM image sourcerw DisplayString .1.3.6.1.4.1.2272.1.100.5.1.42 |
rc2kBootConfigFallBackBootImageSourceupgrade fall-back boot monitor sourcerw DisplayString .1.3.6.1.4.1.2272.1.100.5.1.43 |
rc2kCardTable2k Card table SEQUENCE OF Rc2kCardEntry .1.3.6.1.4.1.2272.1.100.6 |
rc2kCardEntryEntry containing information of 2k Card Rc2kCardEntry .1.3.6.1.4.1.2272.1.100.6.1 |
rc2kCardIndexslot number.ro INTEGER .1.3.6.1.4.1.2272.1.100.6.1.1 |
rc2kCardFrontTypeUsed to indicate card types in the Accelar
8000 product families.
For Accelar 8000 devices, all cards use
an encoded value according to the following rule:
| 6 | 1 | 5 | 4 | 1 | 3 | 4 | 8 |
+-+-+++
bits : |31-26 | 25 | 24-20 | 19-16 | 15 | 14-12 | 11-8 | 7-0 |
+-+-++++
field : | a | b | c | d | e | f | g | h |
+-+-++++
a : Family type/Product line (6 bits (5 bits usuable) (was 4 bits))
MSB bit31 should not be used (MIB compiler fails)
0x0-00 = 0000-00 = Reserved
0x1-00 = 0001-00 = Monoploy non specific (e.g backplane, psu, fans)
0x2-00 = 0010-00 = Boardwalk
0x2-01 = 0010-01 = Power Ranger
0x3-00 = 0011-00 = Marvin Gardens
0x4-00 = 0100-00 = Cobra (was Thunderbolt (was Pacific))
0x5-00 = 0101-00 = PP8300 (was ParkPlace)
0x6-00 = 0110-00 = Central Office (only used in chassis)
0x7-00 = 0111-00 = Alteon WebSystems
b : Interface / Device type variation: 1 bit (was 3 bits, 2 bits were stolen by faimly)
MSB bit31 should not be used (MIB compiler fails)
0x0-00 = 0000-00 = Reserved
0x1-00 = 0001-00 = Monoploy non specific (e.g backplane, psu, fans)
0x2-00 = 0010-00 = Boardwalk
0x2-01 = 0010-01 = Power Ranger
0x3-00 = 0011-00 = Marvin Gardens
0x4-00 = 0100-00 = Cobra (was Thunderbolt (was Pacific))
0x5-00 = 0101-00 = PP8300 (was ParkPlace)
0x6-00 = 0110-00 = Central Office (only used in chassis)
0x7-00 = 0111-00 = Alteon WebSystems
b : Interface / Device type variation: (Were 3 bits, 2 bits taken by family)
0x1 = 1 = M-module (128K RARU records)
c : Interface / device type:
0x0 = 00000 = CPU
0x1 = 00001 = Switch fabric
0x2 = 00010 = Copper Ethernet
0x3 = 00011 = Fiber Ethernet
0x4 = 00100 = Sonet (Packets)
0x5 = 00101 = ATM
0x6 = 00110 = Token Ring
0x7 = 00111 = RMON
0x8 = 01000 = BFM (Frame or cells indicated by field 'a' above)
0x9 = 01001 = PSU
0xa = 01010 = Fan Tray
0xb = 01011 = Chassis/Backplane
0xc = 01100 = CPU Mezz
0xd = 01101 = SSL
0xe = 01110 = Launch Pad
0xf = 01111 = Chassis/Midplane
0x10 = 10000 = Auxillary Card
0x11 = 10001 = CPU w/256M SDRAM
0x12 = 10010 = reserved for future
0x13 = 10011 = WSM Fiber Ethernet
d : Maximum speed (highest negotiable speed)
0x0 = 0000 = 10 Mbit
0x1 = 0001 = 100 Mbit
0x2 = 0010 = 1 Gbit
0x3 = 0011 = 10 Gbit
0x4 = 0100 = OC-3
0x5 = 0101 = OC-12
0x6 = 0110 = OC-48
0x7 = 0111 = OC-92
0x8 = 1000 = OC-192
0x9 = 1001 = 4 Mbit (TR)
0xa = 1010 = 16 Mbit (TR)
0xb = 1011 = E3
0xc = 1100 = DS1
0xd = 1101 = DS3
0xe = 1110 = none (no PHY interfaces on board)
0xf = 1111 = Max speed indicated implicitly in field (c) (for expansion)
e : 0=non-redundant, (1 bit)
1=redundant
f : Card specific info. (3 bits)
For Gigabit used as follows:
000=short-haul (SX)
010=long-haul (LX)
100=extra-distance (DX)
101=GBIC
For 10 Gigabit used as follws
000 = 10GE WAN serial 1310nm (XLW)
001 = 10GE WAN serial 1550nm (XEW)
100 = 10GE LAN serial 1310nm (XLR)
101 = 10GE LAN serial 1550nm (XER)
For ATM/Sonet used as follows
000 = multi mode
001 = single mode
010 = single or multimode
011 = not applicable (e.g., copper has no mode)
For Marvin Gardens, indicates number of MDA slots
000 = none
001 = one option slots
010 = two option slots
011 = three option slots
For Power Supplies:
000 = AC PSU
001 = DC PSU
010 = PoE 1770W AC PSU
011 = PoE 1400W AC PSU
For CPU Mezz:
000 = MPC755/MPC107 Mezz
For SSL:
000 = server offloading
001 = end to end encryption
For WSM:
000 = WSM mode
001 = ASFM mode
For 8003 (3 slot) chassis differentiation:
000 = ERS 8003
001 = MERS 8003-R (Triumph)
For PP8300 I/O or CP:
000: PP8300 48TX, 10/100/1000 without POL
001: PP8300 48TX, 10/100/1000 with POL
010: SFP
000: non SFP
For Cobra Chassis:
001: 12G
010: 24G
100: 48T
g : Chassis type (4 bits, possibly MSB 2 bits are extension of field b)
0x0 = 0000 = work-group (single card switches, etc)
0x1 = 0001 = back-bone (chassis based products)
0x2 = 0010 = MDA (option modules)
h : Number of ports (binary representation obmited)
(for ACIM/BFM cards, this is number of octapids/blackbirds/dea)
0x00 = no ports (cpus, switch fabrics)
0x01 = 1-port,
0x02 = 2-port,
0x04 = 4-port,
0x06 = 6-port,
0x08 = 8-port,
0x0c = 12-port,
0x10 = 16-port,
0x18 = 24-port,
0x22 = 36-port,
0x30 = 48-port,
0x40 = 64-port.ro Enumeration .1.3.6.1.4.1.2272.1.100.6.1.2 |
rc2kCardFrontDescriptiondescriptionro DisplayString .1.3.6.1.4.1.2272.1.100.6.1.3 |
rc2kCardFrontAdminStatusUsed to indicate the administrative status of this
cardrw Enumeration .1.3.6.1.4.1.2272.1.100.6.1.4 |
rc2kCardFrontOperStatusUsed to indicate the operational status of this card.ro Enumeration .1.3.6.1.4.1.2272.1.100.6.1.5 |
rc2kCardFrontSerialNumserial number of cardro DisplayString .1.3.6.1.4.1.2272.1.100.6.1.6 |
rc2kCardFrontHwVersionhardware versionro DisplayString .1.3.6.1.4.1.2272.1.100.6.1.7 |
rc2kCardFrontPartNumberpart numberro DisplayString .1.3.6.1.4.1.2272.1.100.6.1.8 |
rc2kCardFrontDateCodedate codero DisplayString .1.3.6.1.4.1.2272.1.100.6.1.9 |
rc2kCardFrontDeviationsdeviationsro DisplayString .1.3.6.1.4.1.2272.1.100.6.1.10 |
rc2kCardFrontMacAddrbase mac addressroobsolete MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2272.1.100.6.1.11 |
rc2kCardBackTypeRefer to rc2kCardFrontType for the encoding schemero Enumeration .1.3.6.1.4.1.2272.1.100.6.1.12 |
rc2kCardBackDescriptiondescriptionro DisplayString .1.3.6.1.4.1.2272.1.100.6.1.13 |
rc2kCardBackSerialNumserial number of cardro DisplayString .1.3.6.1.4.1.2272.1.100.6.1.14 |
rc2kCardBackHwVersionhardware versionro DisplayString .1.3.6.1.4.1.2272.1.100.6.1.15 |
rc2kCardBackPartNumberpart numberro DisplayString .1.3.6.1.4.1.2272.1.100.6.1.16 |
rc2kCardBackDateCodedate codero DisplayString .1.3.6.1.4.1.2272.1.100.6.1.17 |
rc2kCardBackDeviationsdeviationsro DisplayString .1.3.6.1.4.1.2272.1.100.6.1.18 |
rc2kCardPCMCIATypeUsed to indicate the type of PCMCIA card currently
installed in this CPU card, if any.
For non-CPU cards, this variable has no meaning and
will always be set to none(1).ro Enumeration .1.3.6.1.4.1.2272.1.100.6.1.19 |
rc2kCardPCMCIADescrPCMCIA descriptorro DisplayString .1.3.6.1.4.1.2272.1.100.6.1.20 |
rc2kCardASICDescrASIC descriptorro DisplayString .1.3.6.1.4.1.2272.1.100.6.1.21 |
rc2kCardFrontMasterIOUsed to indicate whether an IO card in a 8100 device
is operating in the 'master' mode.
This variable is not meaningful for non-IO cards and
non-8100 devices.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.100.6.1.22 |
rc2kCardSmltOnSingleCpSupportedUsed to indicate whether an IO card is updated to
support SMLT on single Cp feature or not.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.100.6.1.23 |
rc2kCardMezzCardUsed to indicate the CPU Mezz cardro Enumeration .1.3.6.1.4.1.2272.1.100.6.1.24 |
rc2kCardFrontPoeOperStatusUsed to indicate the operational status of this card.ro Enumeration .1.3.6.1.4.1.2272.1.100.6.1.25 |
rc2kCardMezzSerialNumUsed to get the serial number of the mezzro OCTET STRING .1.3.6.1.4.1.2272.1.100.6.1.26 |
rc2kCardMezzHwVersionUsed to get the HW version of the mezz. The
value of HW Version corresponds to the value of
part number.ro Enumeration .1.3.6.1.4.1.2272.1.100.6.1.27 |
rc2kCardMezzPartNumUsed to get the part number of the mezz. The
value of part number corresponds to the value of
HW Version.ro Enumeration .1.3.6.1.4.1.2272.1.100.6.1.28 |
rc2kCardSlotPriorityUsed to indicate the priority of the slot for power
management.It will take effect only after reboot.rw Enumeration .1.3.6.1.4.1.2272.1.100.6.1.29 |
rc2kCardSlotOriginalPriorityPriority of the slot for power management which the
swtich has currently booted with. It will remain the
same until the next reboot.ro Enumeration .1.3.6.1.4.1.2272.1.100.6.1.30 |
rc2kCardModeUsed to indicate the single port or dual port is
usingrw Enumeration .1.3.6.1.4.1.2272.1.100.6.1.31 |
rc2kCopyFile OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.100.7 |
rc2kCopyFileSourcesource filerw OCTET STRING .1.3.6.1.4.1.2272.1.100.7.1 |
rc2kCopyFileDestinationdest filerw OCTET STRING .1.3.6.1.4.1.2272.1.100.7.2 |
rc2kCopyFileActionstart or cancellrw Enumeration .1.3.6.1.4.1.2272.1.100.7.3 |
rc2kCopyFileResultresultro Enumeration .1.3.6.1.4.1.2272.1.100.7.4 |
rc2kQos OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.100.8 |
rc2kAtm OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.100.9 |
rc2kMdaCardTableMda card table SEQUENCE OF Rc2kMdaCardEntry .1.3.6.1.4.1.2272.1.100.10 |
rc2kMdaCardEntryEntry containing infomation of Mda card Rc2kMdaCardEntry .1.3.6.1.4.1.2272.1.100.10.1 |
rc2kMdaCardSlotNumSlot numberro INTEGER .1.3.6.1.4.1.2272.1.100.10.1.1 |
rc2kMdaCardMdaNumMDA number within slot. MDAs are numbered
from left to right.ro INTEGER .1.3.6.1.4.1.2272.1.100.10.1.2 |
rc2kMdaCardTypeRefer to rc2kCardFrontType for the encoding schemero Enumeration .1.3.6.1.4.1.2272.1.100.10.1.3 |
rc2kMdaCardDescriptiondescription of mda cardro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2272.1.100.10.1.4 |
rc2kMdaCardAdminStatusadministration status of mda cardrw Enumeration .1.3.6.1.4.1.2272.1.100.10.1.5 |
rc2kMdaCardOperStatusoperation status of mda card.ro Enumeration .1.3.6.1.4.1.2272.1.100.10.1.6 |
rc2kMdaCardSerialNumserial number of mad cardro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2272.1.100.10.1.7 |
rc2kMdaCardHwVersionhardware version of mda cardro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2272.1.100.10.1.8 |
rc2kMdaCardPartNumberpart number of mda cardro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2272.1.100.10.1.9 |
rc2kMdaCardDateCodedate code of mda cardro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2272.1.100.10.1.10 |
rc2kMdaCardDeviationshardware deviation infomation of mda cardro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2272.1.100.10.1.11 |
rc2kMdaCardMacAddrbase mac address of mda cardro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2272.1.100.10.1.12 |
rc2kMdaCardNumPortsnumber of ports on mda cardro Integer32 .1.3.6.1.4.1.2272.1.100.10.1.13 |
rc2kMdaCardFirstIfIndexfirst ifindex number on mda cardro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2272.1.100.10.1.14 |
rc2kMdaCardLastIfIndexlast ifindex number on mda cardro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2272.1.100.10.1.15 |
rc2kCpuEthernetPortRouteTable2k CPU Ethernet Port Route table SEQUENCE OF Rc2kCpuEthernetPortRouteEntry .1.3.6.1.4.1.2272.1.100.11 |
rc2kCpuEthernetPortRouteEntryEntry containing infomation of 2k CPU Ethernet Port Rc2kCpuEthernetPortRouteEntry .1.3.6.1.4.1.2272.1.100.11.1 |
rc2kCpuEthernetPortRouteNetworkUsed to configure the network that can be
used to remotely manage this device.rw IpAddress .1.3.6.1.4.1.2272.1.100.11.1.1 |
rc2kCpuEthernetPortRouteGatewayUsed to configure the the IP address of the
gateway that should be used to forward IP
traffic.rw IpAddress .1.3.6.1.4.1.2272.1.100.11.1.2 |
rc2kCpuEthernetPortRouteRowStatusrow statusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.100.11.1.3 |
rc2kCPUTypeGeneralGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.100.12 |
rc2kCPUTypePrimaryThis enum type will distinguish one CPU type from the other.ro Enumeration .1.3.6.1.4.1.2272.1.100.12.1 |
rc2kCPUTypeSecondaryThis type will distinguish one Secondary CPU type from the other.ro Enumeration .1.3.6.1.4.1.2272.1.100.12.2 |
rc2kCPUTypePrimaryMemoryThis gives the memory size of the Primary CPU type.ro Enumeration .1.3.6.1.4.1.2272.1.100.12.3 |
rc2kCPUTypeSecondaryMemoryThis gives the memory size of the Secondary CPU type.ro Enumeration .1.3.6.1.4.1.2272.1.100.12.4 |
rc2kCpuEthernetPortIpv6RouteTable2k CPU Ethernet Port Route table for Ipv6 SEQUENCE OF Rc2kCpuEthernetPortIpv6RouteEntry .1.3.6.1.4.1.2272.1.100.13 |
rc2kCpuEthernetPortIpv6RouteEntryEntry containing information of 2k CPU Ethernet Port Ipv6 Rc2kCpuEthernetPortIpv6RouteEntry .1.3.6.1.4.1.2272.1.100.13.1 |
rc2kCpuEthernetPortIpv6RouteNetworkUsed to configure the ipv6 network that can be used to remotely manage this device. Ipv6Address (IPV6-TC) .1.3.6.1.4.1.2272.1.100.13.1.1 |
rc2kCpuEthernetPortIpv6RoutePrefixLengthThe length of the prefix (in bits). INTEGER .1.3.6.1.4.1.2272.1.100.13.1.2 |
rc2kCpuEthernetPortIpv6RouteGatewayUsed to configure the the IPv6 address of the gateway that should be used to forward IPv6 traffic. Ipv6Address (IPV6-TC) .1.3.6.1.4.1.2272.1.100.13.1.3 |
rc2kCpuEthernetPortIpv6RouteRowStatusrow statusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.100.13.1.4 |
rc2kCardModTableRTM info table SEQUENCE OF Rc2kCardModEntry .1.3.6.1.4.1.2272.1.100.14 |
rc2kCardModEntryEntry containing RTM information Rc2kCardModEntry .1.3.6.1.4.1.2272.1.100.14.1 |
rc2kCardModIndexslot number. Integer32 .1.3.6.1.4.1.2272.1.100.14.1.1 |
rc2kCardModPresentIndicates if the RTM in this slot is presentro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.100.14.1.2 |
rc2kCardModTypeRTM typero Enumeration .1.3.6.1.4.1.2272.1.100.14.1.3 |
rc2kCardModDescriptionRTM descriptionro DisplayString .1.3.6.1.4.1.2272.1.100.14.1.4 |
rc2kCardModSerialNumRTM serial numberro DisplayString .1.3.6.1.4.1.2272.1.100.14.1.5 |
rc2kCardModHwVersionRTM hardware versionro DisplayString .1.3.6.1.4.1.2272.1.100.14.1.6 |
rc2kCardModPartNumberRTM part numberro DisplayString .1.3.6.1.4.1.2272.1.100.14.1.7 |
rc2kCardModDateCodeRTM date codero DisplayString .1.3.6.1.4.1.2272.1.100.14.1.8 |
rc2kCardModDeviationsRTM deviationsro DisplayString .1.3.6.1.4.1.2272.1.100.14.1.9 |
rc2kCardModCpldIdRTM CPLD ID valuero Integer32 .1.3.6.1.4.1.2272.1.100.14.1.10 |
rc2kCardModCpldRevRTM CPLD revision valuero Integer32 .1.3.6.1.4.1.2272.1.100.14.1.11 |
rc2kCardPerfTableThis table represents the Card/Slot level DRAM
size, DRAM Used, DRAM Free and CPU Utilization
for the R Module and RC Module cards SEQUENCE OF Rc2kCardPerfEntry .1.3.6.1.4.1.2272.1.100.15 |
rc2kCardPerfEntryEntry containing information of Card performance Rc2kCardPerfEntry .1.3.6.1.4.1.2272.1.100.15.1 |
rc2kCardPerfIdThis represents the slot number.
This is only for line cards, slot 5 and 6 should not be used. INTEGER .1.3.6.1.4.1.2272.1.100.15.1.1 |
rc2kCardPerfDramSizeThis represents DRAM Size in Mega bytesro Integer32 .1.3.6.1.4.1.2272.1.100.15.1.2 |
rc2kCardPerfDramUsedThis represents the amount of DRAM used in kilo bytesro Integer32 .1.3.6.1.4.1.2272.1.100.15.1.3 |
rc2kCardPerfDramFreeThis represents the amount of DRAM Free in kilo bytesro Integer32 .1.3.6.1.4.1.2272.1.100.15.1.4 |
rc2kCardPerfCPUUtilizationThis represents the percentage of CPU utilizationro Integer32 .1.3.6.1.4.1.2272.1.100.15.1.5 |
More MIBs from Rapidcity
Browse all RapidcityMIBs →RAPID-CITY
The RAPID-CITY MIB module facilitates SNMP-based monitoring and management of Accelar product family hardware, specifically tracking performance metrics such as throughput, connection states, and resource utilization for traffic acceleration appliances.
6502 objects→
RAPID-CITY-VSP
The RAPID-CITY-VSP MIB provides enterprise-level monitoring and management capabilities for the Accelar product family, enabling the collection of performance metrics, interface statistics, and system health data for Accelar network appliances. This module facilitates the tracking of device availability, traffic throughput, and operational states specific to Accelar's hardware and software implementations.
5404 objects→
RC-CFM-MIB
The RC-CFM-MIB module enables monitoring of Ethernet Connectivity Fault Management (CFM) state variables, including Maintenance Domain, Maintenance Association, and Maintenance Endpoint operational statuses, to detect and isolate Layer 2 network faults. It provides specific counters and gauges for CFM message transmission, reception, and error conditions to facilitate rapid diagnosis of link integrity and service continuity issues.
572 objects→
SWL2MGMT-MIB
SNMP MIB module
286 objects→
RC-IP-POLICY-MIB
The RC-IP-POLICY-MIB module provides SNMP access to configure and monitor IP traffic filtering rules, policy routing decisions, and associated session statistics on Accelar network appliances. It enables administrators to track policy hit counts, match conditions, and enforcement states for granular control over packet forwarding and security policies.
220 objects→
RC-PORT-MIB
SNMP MIB module
198 objects→