RC-PORT-MIB
Enterprise MIB for the Accelar product family.
Main OID:
rcPortMib.1.3.6.1.4.1.2272.1.4.10.0
198
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
198 total| Object Name |
|---|
rcPortMibEnterprise MIB for the Accelar product family. MODULE-IDENTITY .1.3.6.1.4.1.2272.1.4.10.0 |
rcPortTablePort table SEQUENCE OF RcPortEntry .1.3.6.1.4.1.2272.1.4.10.1 |
rcPortEntryEntry containing info. for a particular port RcPortEntry .1.3.6.1.4.1.2272.1.4.10.1.1 |
rcPortIndexAn index value that uniquely identifies a port.
This value is similar to ifIndex in MIB2.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2272.1.4.10.1.1.1 |
rcPortTypePort typero Enumeration .1.3.6.1.4.1.2272.1.4.10.1.1.2 |
rcPortConnectorTypeType of connector installed on this port.ro Enumeration .1.3.6.1.4.1.2272.1.4.10.1.1.3 |
rcPortPerformRoutingIndicate whether this port should perform
routingrwdeprecated TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.4.10.1.1.4 |
rcPortHighPriorityIndicate whether this port should be treated with
high priorityrwdeprecated TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.4.10.1.1.5 |
rcPortActionPort related actions.rw Enumeration .1.3.6.1.4.1.2272.1.4.10.1.1.6 |
rcPortResultResult from the last Vlan action.ro Enumeration .1.3.6.1.4.1.2272.1.4.10.1.1.7 |
rcPortPrimaryConnectorFor ports configured with redundant connectors,
this value is used to indicate which connector
should be used as the 'active' connector on this
port the next time the port is placed into the
ifAdminStatus=Up.rw Enumeration .1.3.6.1.4.1.2272.1.4.10.1.1.8 |
rcPortActiveConnectorFor ports configured with redundant connectors,
this value is used to indicate which connector
is currently the active one. Only one connector
can be active an anytime.ro Enumeration .1.3.6.1.4.1.2272.1.4.10.1.1.9 |
rcPortBackupConnectorStatusIndicate the status of the link attached to the
back-up (non-active) connector.ro Enumeration .1.3.6.1.4.1.2272.1.4.10.1.1.10 |
rcPortAutoNegotiateIndicate whether this port enabled for auto
negotiations or not.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.4.10.1.1.11 |
rcPortAdminDuplexIndicates the port duplex typerw Enumeration .1.3.6.1.4.1.2272.1.4.10.1.1.12 |
rcPortOperDuplexIndicate this port's current duplex value.ro Enumeration .1.3.6.1.4.1.2272.1.4.10.1.1.13 |
rcPortAdminSpeedIndicate this port's speed.rw Enumeration .1.3.6.1.4.1.2272.1.4.10.1.1.14 |
rcPortOperSpeedIndicate this port's current speed value.ro Integer32 .1.3.6.1.4.1.2272.1.4.10.1.1.15 |
rcPortMltIdIndicate which multi-link trunk (MLT) this port
is assigned to. If this port is not associated
with any MLT, this value will be set to zero(0).ro Integer32 .1.3.6.1.4.1.2272.1.4.10.1.1.16 |
rcPortLockedIndicate whether this port is locked.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.4.10.1.1.17 |
rcPortAutoNegotiationSupportedIndicate whether this port can support
auto-negotiation.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.4.10.1.1.18 |
rcPortSingleRoutablePortIndicate whether this port is a single routable
port. If this value is true, the port functions
like a traditional router port.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.4.10.1.1.19 |
rcPortUnknownMacDiscardIf rcUnknownMacDiscard is set to True,
then a packet with an unknown source MAC address
is dropped on that port, and other ports then
will discard any packets with this MAC address
in the destination field.
For example,
suppose 11:22:33:44:55:66 is an unknown source MAC,
packets with source MAC 11:22:33:44:55 coming from
this port is discarded, further more, packets with
destination MAC 11:22:33:44:55:66 coming from
other ports are also discarded, unless this address
is later learned on another port or the restriction
ages out.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.4.10.1.1.20 |
rcPortNumStateTransition# state transitions.ro Counter32 .1.3.6.1.4.1.2272.1.4.10.1.1.21 |
rcPortUserPriorityUser priority level.rwdeprecated Enumeration .1.3.6.1.4.1.2272.1.4.10.1.1.22 |
rcPortAllowOversizeFrameUsed to specify whether over-size frames should be
processed or dropped.rwdeprecated TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.4.10.1.1.23 |
rcPortQosLevelUsed to specify the Qos level packets, carried on this
port, should be processed with.rw Enumeration .1.3.6.1.4.1.2272.1.4.10.1.1.30 |
rcPortDiffServEnableUsed to enable/disable the Differentiated Service
feature on this port.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.4.10.1.1.31 |
rcPortDiffServTypeUsed to specify the Differentiated Service type
for this port.rw Enumeration .1.3.6.1.4.1.2272.1.4.10.1.1.32 |
rcPortDiffServIeee8021POverrideEnableUsed to enable/disable the Differentiated Service
IEEE 802.1P over-ride feature.rwdeprecated TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.4.10.1.1.33 |
rcPortVendorDescrUsed to show the name of the vendor of this port's
connector. Only applicable to ports on a GBIC cards.ro DisplayString .1.3.6.1.4.1.2272.1.4.10.1.1.34 |
rcPortNameThis port's name.rw DisplayString .1.3.6.1.4.1.2272.1.4.10.1.1.35 |
rcPortOctapidIdThe octapid id of the mirrored port.rodeprecated Integer32 .1.3.6.1.4.1.2272.1.4.10.1.1.36 |
rcPortWanIndicatie this port's current WAN/LAN mode. Valid for 10 GE onlyrw Enumeration .1.3.6.1.4.1.2272.1.4.10.1.1.37 |
rcPortTransportIndicatie this port's current tranport layer. Valid for 10 GE onlyrw Enumeration .1.3.6.1.4.1.2272.1.4.10.1.1.38 |
rcPortMultimediaFilterEnableUsed to enable/disable the Telephony device selected on this portrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.4.10.1.1.39 |
rcPortMultimediaDevSelectionUsed to set/get the selected Multimedia &
Telephony Devices on this port. The String is
the name of the device in the
rcIpFilterMediaDevTablerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2272.1.4.10.1.1.40 |
rcPortServiceTypeIndicates the port functionality. 12uni is used to
configure the port to be part of Martini service,
tls is used to configure the port to be part of
Any2Any VPN service and ip is used to perform the IP
routing and mpls if enabled.rw Enumeration .1.3.6.1.4.1.2272.1.4.10.1.1.41 |
rcPortModeThe port mode for l2uni service type.If the port is
configured for l2uni service type, then the mode can
be transparent or switched.rw Enumeration .1.3.6.1.4.1.2272.1.4.10.1.1.42 |
rcPortAdminRoutingIndicate whether the port is routable.rw EnableValue (RAPID-CITY) .1.3.6.1.4.1.2272.1.4.10.1.1.43 |
rcPortOperRoutingThe status of the port whether is routable.ro EnableValue (RAPID-CITY) .1.3.6.1.4.1.2272.1.4.10.1.1.44 |
rcPortPidThe pid of the mirrored port.ro Integer32 .1.3.6.1.4.1.2272.1.4.10.1.1.45 |
rcPortIeee8021POverrideEnableUsed to enable/disable IEEE 802.1P override.
If it is enabled, 802.1p vlaue from a tagged
frame may not honor.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.4.10.1.1.46 |
rcPortShaperEnableUsed to enable/disable shaper on the port.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.4.10.1.1.47 |
rcPortShaperMaxRateShaping rate in mega bits per second. Note that
actual shaping rate might be different from the
configured rate due to the rate granularity
of the shaper.rw INTEGER .1.3.6.1.4.1.2272.1.4.10.1.1.48 |
rcPortShaperBurstSizeBurst size in kilo bytes per second. Note
that actual burst size might be different
from the configured size due to the granularity
of the shaper.rw INTEGER .1.3.6.1.4.1.2272.1.4.10.1.1.49 |
rcPortCpLimitShutDownA TRUE value indicates if CP Limit shut down
the interface.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.4.10.1.1.50 |
rcPortHighSecureEnableEnable/Disable high secure.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.4.10.1.1.51 |
rcPortTlsPriorityOverrideEnable/Disable tls port priority override feature.rw EnableValue (RAPID-CITY) .1.3.6.1.4.1.2272.1.4.10.1.1.52 |
rcPortVctAbilityIf this object is TRUE, then the specified port is
hardware-capable of doing the VCT test, if the
rcPortAdminStatus is also true. If this object is
FALSE, then the hardware cannot do the VCT test
regardless of the setting of the rcPortAdminStatus.ro Enumeration .1.3.6.1.4.1.2272.1.4.10.1.1.53 |
rcPortVctAdminStatusAdmin status for port VCT test. If this object is
set to TRUE, then the VCT test can be performed. If
it is set to FALSE, then the test cannot be performed,
even if the port hardware is capable of doing it. If
this variable si read, then the value returned is
what was previously written.rw EnableValue (RAPID-CITY) .1.3.6.1.4.1.2272.1.4.10.1.1.54 |
rcPortMrouteStrLimitmaximum number of multicast streams that are
allowed to ingress to CPU through this port.rw INTEGER .1.3.6.1.4.1.2272.1.4.10.1.1.55 |
rcPortMrouteStrTimerChecksampling period to check number of multicast
streams that has ingressed CPU through this port.rw INTEGER .1.3.6.1.4.1.2272.1.4.10.1.1.56 |
rcPortMrouteStrLimitEnableenable or disable mroute stream limit on port.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.4.10.1.1.57 |
rcPortUpdateDynamicMacQosLevelIt is used to indicate whether to update qos
level for dynamic learned mac add resses
associated with a port-based vlan when port qos
level changes. If it is set to TRUE, qos level
for all dynamic learned mac addresses will be
changed upon changing port qos level. If it
is set to DISABLE, once a mac address is learned,
qos level will not updated when port qos level
changes.rw EnableValue (RAPID-CITY) .1.3.6.1.4.1.2272.1.4.10.1.1.58 |
rcPortVplsDualHomingThe VPLS dual homing is for VPLS service type only.
It can be disable, firstNNI or secondNNI.rw Enumeration .1.3.6.1.4.1.2272.1.4.10.1.1.59 |
rcPortVplsMgmtVlanManagement Vlan is configured on this portrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.4.10.1.1.60 |
rcPortTlsManagedBySpTrue/False tls devices on port Managed By Service Provider.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.4.10.1.1.61 |
rcPortAutoNegAdThis object is used to specify the port speed
and duplex abilities to be advertised during
link negotiation.
bit 0 - 10 half duplex advertised
bit 1 - 10 full duplex advertised
bit 2 - 100 half duplex advertised
bit 3 - 100 full duplex advertised
bit 4 - 1000 half duplex advertised
bit 5 - 1000 full duplex advertised
bit 6 - Mac PAUSE frame support advertised
bit 7 - Asymmetric PAUSE frame support advertised
The abilities specified in this object are only used
when auto-negotiation is enabled on the port. If all
bits in this object are disabled, and auto-negotiation
is enabled on the port, then the physical link process
on the port will be disabled (if hardware supports
this ability).
Any change in the value of this bit map will force the
PHY to restart the auto-negotiation process. This will
have the same effect as physically unplugging and
reattaching the cable plant attached to this port.
Only capabilities present in the hardware as indicated
by rcPortAutoNegAdCapability can be advertised.
The default value for this object will be the value
of the associated instance of rcPortAutoNegAdCapability.rw Bits .1.3.6.1.4.1.2272.1.4.10.1.1.62 |
rcPortAutoNegAdCapabilityThis object indicates the port speed and duplex
capabilities that hardware can actually support on a
port, and which may be advertised by the port
using auto-negotiation. Bit 7 tells if a port supports
pause frame capabilities (for full-duplex links) as a
part of the advertisement.
bit 0 - 10 half duplex advertisements
bit 1 - 10 full duplex advertisements
bit 2 - 100 half duplex advertisements
bit 3 - 100 full duplex advertisements
bit 4 - 1000 half duplex advertisements
bit 5 - 1000 full duplex advertisements
bit 6 - Mac PAUSE frame support advertisements
bit 7 - Asymmetric PAUSE frame support advertisements
If auto negotiation is not supported by the port
hardware, then all bits will reflect a value of zero.ro Bits .1.3.6.1.4.1.2272.1.4.10.1.1.63 |
rcPortAutoRecoverPortenable or disable auto recovery of port from action
taken by cp-limit, link flap or loop detect featuresrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.4.10.1.1.64 |
rcPortExtCplimitConfIndicates the port configuration for extended CP-LIMITrw Enumeration .1.3.6.1.4.1.2272.1.4.10.1.1.65 |
rcPortExtCplimitUtilRateThreshold for Ingress traffic utilization rate of the port
for extended CP-LIMITrw INTEGER .1.3.6.1.4.1.2272.1.4.10.1.1.66 |
rcPortEgressRateLimitEgress Rate Limit.rw INTEGER .1.3.6.1.4.1.2272.1.4.10.1.1.67 |
rcPortEgressRateLimitStateUsed to enable/disable shape/egress-rate-limit
functionality.rw EnableValue (RAPID-CITY) .1.3.6.1.4.1.2272.1.4.10.1.1.68 |
rcPortBpduFilteringTimerCountThe remaining time the port will be disabled due
to a BPDU received when BPDU filtering is enabled.ro TimeInterval .1.3.6.1.4.1.2272.1.4.10.1.1.69 |
rcPortBpduFilteringTimeoutThe time the port will be disabled when a BPDU is
received when BPDU filtering is enabled.rw TimeInterval .1.3.6.1.4.1.2272.1.4.10.1.1.70 |
rcPortBpduFilteringAdminEnabledUsed to enable/disable BPDU filtering.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.4.10.1.1.71 |
rcPortBpduFilteringOperEnabledIndicates whether BPDU filtering is actually
enabled or disabled.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.4.10.1.1.72 |
rcPortQinqEtherTypeThe qinq ether type value. It is hex value.
It should be displayed and input as Hex value. It is
only be used when port is associated with QnQ service
UNI. Otherwise, it would be ignoredrw INTEGER (1..'FFFF'h) .1.3.6.1.4.1.2272.1.4.10.1.1.73 |
rcPortTrustDscpUsed to enable/disable the trusted DSCP feature.
If enabled, the internal qos-level and 802.1p value are derived
from the received packet's DSCP value. This MIB object is
applicable to ports in 8348GTX so that higher priority IP traffic
can bypass the oversubscribed cascading link.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.4.10.1.1.74 |
rcPortCpLimitEnableUsed to enable/disable the control packet rate limit.
Specifies whether or not rate limiting is currently in
operation for multicast and broadcast packets for the
specified port.rw EnableValue (RAPID-CITY) .1.3.6.1.4.1.2272.1.4.10.1.1.75 |
rcPortCpMulticastLimitUsed to limit Multicast traffic on the specified port. Sets
the limit in packets per second.rw INTEGER .1.3.6.1.4.1.2272.1.4.10.1.1.76 |
rcPortCpBroadcastLimitUsed to limit Broadcast traffic on the specified port. Sets
the limit in packets per second.rw INTEGER .1.3.6.1.4.1.2272.1.4.10.1.1.77 |
rcPortSmartAutoNegotiateThis object indicates whether 'smart' autonegotiation is
enabled on a port (smart autonegotiation indicates that the
port can sense whether its partner has autonegotiation
enabled). This object, when supported, works in conjunction
with rcPortAutoNegotiate. It is an inconsistentValue error
to set rcPortAutoNegotiate to false(2) and this object to
true(1) in the same Set request. Setting the object to
true(1) will automatically change rcPortAutoNegotiate to
true(1). Similarly, setting rcPortAutoNegotiate to false(2)
will automatically change this object to false(2).rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.4.10.1.1.78 |
rcPortPcapTablePort pcap Table SEQUENCE OF RcPortPcapEntry .1.3.6.1.4.1.2272.1.4.10.2 |
rcPortPcapEntryEntry containing pcap info. for a particular port RcPortPcapEntry .1.3.6.1.4.1.2272.1.4.10.2.1 |
rcPortPcapIndexAn index value that uniquely identifies a port.
This value is similar to ifIndex in MIB2.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2272.1.4.10.2.1.1 |
rcPortPcapEnableTo enable pcap for the portrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.4.10.2.1.2 |
rcPortPcapModeMode in which pcap is enabledrw Enumeration .1.3.6.1.4.1.2272.1.4.10.2.1.3 |
rcPortPcapFilterListSizeUsed to indicate the number of filter list(s)
that are assigned to this port.ro INTEGER .1.3.6.1.4.1.2272.1.4.10.2.1.4 |
rcPortPcapFilterListUsed to indicate zero or more filter lists that
are associated with this port for pcap. Each
filter list identifier is stored as two bytes
in this array starting from offset zero. Any
unused bytes should be set to zero.rw OCTET STRING .1.3.6.1.4.1.2272.1.4.10.2.1.5 |
rcPortPoe OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.4.10.3 |
rcPortPoePseIndexTablePort table SEQUENCE OF RcPortPoePseIndexEntry .1.3.6.1.4.1.2272.1.4.10.3.1 |
rcPortPoePseIndexEntryEntry containing info. for a particular port RcPortPoePseIndexEntry .1.3.6.1.4.1.2272.1.4.10.3.1.1 |
rcPortPoePseIndexIfIndexAn index value that uniquely identifies an interface
to a PSE port device. The interface identified by a
particular value of this index is the same interface
as identified by the same value of ifIndex.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2272.1.4.10.3.1.1.1 |
rcPortPoePseIndexGroupIndexAn index value that uniquely identifies the group
containing the port to which a power Etherenet PSE
is connected. Group means box in the stack, module
in a rack and the value 1 MUST be used for
non-modular devices.ro INTEGER .1.3.6.1.4.1.2272.1.4.10.3.1.1.2 |
rcPortPoePseIndexPortIndexThis variable uniquely identifies the power Ethernet
PSE port within group rcPoePseGroupIndex to which the
power Ethernet PSE entry is connected.ro INTEGER .1.3.6.1.4.1.2272.1.4.10.3.1.1.3 |
rcPortPoeMainPseExtnTablePort table SEQUENCE OF RcPortPoeMainPseExtnEntry .1.3.6.1.4.1.2272.1.4.10.3.2 |
rcPortPoeMainPseExtnEntryEntry containing info. for a particular port RcPortPoeMainPseExtnEntry .1.3.6.1.4.1.2272.1.4.10.3.2.1 |
rcPortPoeMainPseExtnGroupIndexAn index value that uniquely identifies an interface
to a PSE port device. The interface identified by a
particular value of this index is the same interface
as identified by the same value of ifIndex.ro INTEGER .1.3.6.1.4.1.2272.1.4.10.3.2.1.1 |
rcPortPoeMainPseExtnPwrAdminAn index value that uniquely identifies the group
containing the port to which a power Etherenet PSE
is connected. Group means box in the stack, module
in a rack and the value 1 MUST be used for
as identified by the same value of ifIndex.rw EnableValue (RAPID-CITY) .1.3.6.1.4.1.2272.1.4.10.3.2.1.2 |
rcPortPoeMainPseExtnPwrPriorityAn index value that uniquely identifies the group
containing the port to which a power Etherenet PSE
is connected. Group means box in the stack, module
in a rack and the value 1 MUST be used for
as identified by the same value of ifIndex.rw Enumeration .1.3.6.1.4.1.2272.1.4.10.3.2.1.3 |
rcPortPoeMainPseExtnDeviceDetectTypeAn index value that uniquely identifies the group
containing the port to which a power Etherenet PSE
is connected. Group means box in the stack, module
in a rack and the value 1 MUST be used for
as identified by the same value of ifIndex.rw Enumeration .1.3.6.1.4.1.2272.1.4.10.3.2.1.4 |
rcPortPoeMainPseExtnPwrLimitThe maximum available PoE power of the main PSE
expressed in Watts.rw INTEGER .1.3.6.1.4.1.2272.1.4.10.3.2.1.5 |
rcPortPoePsePortExtnTablePort table SEQUENCE OF RcPortPoePsePortExtnEntry .1.3.6.1.4.1.2272.1.4.10.3.3 |
rcPortPoePsePortExtnEntryEntry containing info. for a particular port RcPortPoePsePortExtnEntry .1.3.6.1.4.1.2272.1.4.10.3.3.1 |
rcPortPoePsePortExtnGroupIndexAn index value that uniquely identifies an interface
to a PSE port device. The interface identified by a
particular value of this index is the same interface
as identified by the same value of ifIndex.ro INTEGER .1.3.6.1.4.1.2272.1.4.10.3.3.1.1 |
rcPortPoePsePortExtnPortIndexAn index value that uniquely identifies an interface
to a PSE port device. The interface identified by a
particular value of this index is the same interface
as identified by the same value of ifIndex.ro INTEGER .1.3.6.1.4.1.2272.1.4.10.3.3.1.2 |
rcPortPoePsePortExtnPwrLimitAn index value that uniquely identifies the group
containing the port to which a power Etherenet PSE
is connected. Group means box in the stack, module
in a rack and the value 1 MUST be used for
as identified by the same value of ifIndex.rw INTEGER .1.3.6.1.4.1.2272.1.4.10.3.3.1.3 |
rcPortPoePsePortExtnMeasuredVoltAn index value that uniquely identifies the group
containing the port to which a power Etherenet PSE
is connected. Group means box in the stack, module
in a rack and the value 1 MUST be used for
as identified by the same value of ifIndex.ro Integer32 .1.3.6.1.4.1.2272.1.4.10.3.3.1.4 |
rcPortPoePsePortExtnMeasuredCurrentAn index value that uniquely identifies the group
containing the port to which a power Etherenet PSE
is connected. Group means box in the stack, module
in a rack and the value 1 MUST be used for
as identified by the same value of ifIndex.ro Integer32 .1.3.6.1.4.1.2272.1.4.10.3.3.1.5 |
rcPortPoePsePortExtnPwrConsumptAn index value that uniquely identifies the group
containing the port to which a power Etherenet PSE
is connected. Group means box in the stack, module
in a rack and the value 1 MUST be used for
as identified by the same value of ifIndex.ro Integer32 .1.3.6.1.4.1.2272.1.4.10.3.3.1.6 |
rcPortLacpTablePort LACP table SEQUENCE OF RcPortLacpEntry .1.3.6.1.4.1.2272.1.4.10.4 |
rcPortLacpEntryEntry containing info. for a particular port RcPortLacpEntry .1.3.6.1.4.1.2272.1.4.10.4.1 |
rcPortLacpAdminEnableAdministratively enable/disable LACP on a portrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.4.10.4.1.1 |
rcPortLacpOperEnableIndicates if LACP is operationally enabled or disabled
on a portro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.4.10.4.1.2 |
rcPortLacpFastPeriodicTimeThe number of miliseconds between periodic transmissions
using Short Timeouts.rw INTEGER .1.3.6.1.4.1.2272.1.4.10.4.1.3 |
rcPortLacpSlowPeriodicTimeThe number of miliseconds between periodic transmissions
using LONG Timeouts.rw INTEGER .1.3.6.1.4.1.2272.1.4.10.4.1.4 |
rcPortLacpTimeoutScaleScalar value used to calculate timeout time from
periodic time. Timeout = PeriodicTime * TimeoutScalerw INTEGER .1.3.6.1.4.1.2272.1.4.10.4.1.5 |
rcPortLacpAggrWaitTimeThe number of mili seconds to delay aggregation to
allow multiple links to aggregate simultaneously.rw INTEGER .1.3.6.1.4.1.2272.1.4.10.4.1.6 |
rcPortLacpFastPeriodicTimeOperThe operating value of fast periodic timer on the port.ro INTEGER .1.3.6.1.4.1.2272.1.4.10.4.1.7 |
rcPortLacpSlowPeriodicTimeOperThe operating value of slow periodic timer on the port.ro INTEGER .1.3.6.1.4.1.2272.1.4.10.4.1.8 |
rcPortLacpTimeoutScaleOperThe operating value of timeout scale on the port.ro INTEGER .1.3.6.1.4.1.2272.1.4.10.4.1.9 |
rcPortLacpAggrWaitTimeOperThe operating value of aggreagate wait time on port.ro INTEGER .1.3.6.1.4.1.2272.1.4.10.4.1.10 |
rcPortVLacpTablePort Virtual LACP table SEQUENCE OF RcPortVLacpEntry .1.3.6.1.4.1.2272.1.4.10.5 |
rcPortVLacpEntryEntry containing info. for a particular port RcPortVLacpEntry .1.3.6.1.4.1.2272.1.4.10.5.1 |
rcPortVLacpAdminEnableAdministratively enable/disable Virtual LACP on a portrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.4.10.5.1.1 |
rcPortVLacpOperEnableIndicates if Virtual LACP is operationally enabled or
disabled on a portro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.4.10.5.1.2 |
rcPortVLacpFastPeriodicTimerThe number of miliseconds between periodic transmissions
using Short Timeoutsrw INTEGER .1.3.6.1.4.1.2272.1.4.10.5.1.3 |
rcPortVLacpSlowPeriodicTimerThe number of miliseconds between periodic transmissions
using LONG Timeouts.rw INTEGER .1.3.6.1.4.1.2272.1.4.10.5.1.4 |
rcPortVLacpTimeoutTimeout control value. Long or Short Timeoutrw Enumeration .1.3.6.1.4.1.2272.1.4.10.5.1.5 |
rcPortVLacpTimeoutScaleScalar value used to calculate timeout time from
periodic time. Timeout = PeriodicTime * TimeoutScalerw INTEGER .1.3.6.1.4.1.2272.1.4.10.5.1.6 |
rcPortVLacpEtherTypeVLACP Protocol Identification. The id value is
in Hexrw Integer32 .1.3.6.1.4.1.2272.1.4.10.5.1.7 |
rcPortVLacpEtherMacAddressMulticast Mac Address exclusively used for VLACPDU'srw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2272.1.4.10.5.1.8 |
rcPortVLacpPortStateDisplay the Vlacp Port State.ro Enumeration .1.3.6.1.4.1.2272.1.4.10.5.1.9 |
rcPortVLacpDualHomingEnableEnable/Disable Dual homing on Virtual LACP on a portrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.4.10.5.1.10 |
rcPortRemoteMirroringTablePort Remote Mirroring Table SEQUENCE OF RcPortRemoteMirroringEntry .1.3.6.1.4.1.2272.1.4.10.6 |
rcPortRemoteMirroringEntryEntry containing remote mirroring info. for a
particular port RcPortRemoteMirroringEntry .1.3.6.1.4.1.2272.1.4.10.6.1 |
rcPortRemoteMirroringIndexAn index value that uniquely identifies a port.
This value is similar to ifIndex in MIB2.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2272.1.4.10.6.1.1 |
rcPortRemoteMirroringEnableTo enable remote Mirroring for the portrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.4.10.6.1.2 |
rcPortRemoteMirroringModeMode in which remote mirroring is enabledrw Enumeration .1.3.6.1.4.1.2272.1.4.10.6.1.3 |
rcPortRemoteMirroringSrcMacSource Mac of the remote mirrored packet.
Remote mirroring packet will be send with
this source mac addressrw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2272.1.4.10.6.1.4 |
rcPortRemoteMirroringDstMacDestination Mac of the remote mirrored packet.
Packets will be bridged to this mac address.
Remote mirroring packet will be send to this
mac addressrw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2272.1.4.10.6.1.5 |
rcPortRemoteMirroringEtherTypeEthertype of the remote mirrored packet. Packets
will be send with this ethertyperw INTEGER .1.3.6.1.4.1.2272.1.4.10.6.1.6 |
rcPortRemoteMirroringVlanIdListSizeUsed to indicate the number of VLAN IDs
that are assigned to this port.ro INTEGER .1.3.6.1.4.1.2272.1.4.10.6.1.7 |
rcPortRemoteMirroringVlanIdListThis field is used only if the port is assigned as
remote mirroring termination port. Represents zero
or more filter lists vlan in which the Destination
Mac address resides. Each VLAN ID is stored as
two bytes in this array starting from offset zero.
Any unused bytes should be set to zero.rw OCTET STRING .1.3.6.1.4.1.2272.1.4.10.6.1.8 |
rcPortRemoteMirroringRowStatusRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.4.10.6.1.9 |
rcPortVlacpSessionTableA table used to maintain Vlacp session values. SEQUENCE OF RcPortVlacpSessionEntry .1.3.6.1.4.1.2272.1.4.10.7 |
rcPortVlacpSessionEntryEntry containing Vlacp Session information
regarding a particular port or mlt. RcPortVlacpSessionEntry .1.3.6.1.4.1.2272.1.4.10.7.1 |
rcPortVlacpSessionIfIndexIfIndex of the port or Mlt Integer32 .1.3.6.1.4.1.2272.1.4.10.7.1.1 |
rcPortVlacpSessionSesNumberSession number of an IfIndex Integer32 .1.3.6.1.4.1.2272.1.4.10.7.1.2 |
rcPortVlacpSessionSrcMacAddressMac Address for the sessionro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2272.1.4.10.7.1.3 |
rcPortVlacpSessionRxTimerThe Rx timer for the sessionro Integer32 .1.3.6.1.4.1.2272.1.4.10.7.1.4 |
rcPortVlacpSessionValidbitThe valid bit for the sessionro Enumeration .1.3.6.1.4.1.2272.1.4.10.7.1.5 |
rcPortVlacpSessionInPktCountThe In packet count for the sessionro Integer32 .1.3.6.1.4.1.2272.1.4.10.7.1.6 |
rcPortMgmtLinkTablePort card mgmt port link table SEQUENCE OF RcPortMgmtLinkEntry .1.3.6.1.4.1.2272.1.4.10.8 |
rcPortMgmtLinkEntryEntry containing info. for a particular mgmt port in I/O
card RcPortMgmtLinkEntry .1.3.6.1.4.1.2272.1.4.10.8.1 |
rcPortMgmtLinkIndexIfIndex of the port.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2272.1.4.10.8.1.1 |
rcPortMgmtLinkDescrPort descriptionro DisplayString .1.3.6.1.4.1.2272.1.4.10.8.1.2 |
rcPortMgmtLinkOperStatusadmin status of the mgmt portro Enumeration .1.3.6.1.4.1.2272.1.4.10.8.1.3 |
rcPortMgmtLinkAutoNegotiateAuto-negotiation status of the portro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.4.10.8.1.4 |
rcPortMgmtLinkDuplexduplex setting for the portro Enumeration .1.3.6.1.4.1.2272.1.4.10.8.1.5 |
rcPortMgmtLinkSpeedspeed setting for this port.ro Enumeration .1.3.6.1.4.1.2272.1.4.10.8.1.6 |
rcPortFlushFdbTablePort Flush Fdbtable SEQUENCE OF RcPortFlushFdbEntry .1.3.6.1.4.1.2272.1.4.10.9 |
rcPortFlushFdbEntryport based deletion of mac addresses
learned or discarded on that port RcPortFlushFdbEntry .1.3.6.1.4.1.2272.1.4.10.9.1 |
rcPortFlushFdbAddressMac Address to be deleted.rw DisplayString .1.3.6.1.4.1.2272.1.4.10.9.1.1 |
rcPortFlushFdbVlanIdvlan Id associated with the Mac Addressrw Integer32 .1.3.6.1.4.1.2272.1.4.10.9.1.2 |
rcPortLock OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.4.11 |
rcPortLockEnableIndicate whether the port lock feature is enabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.4.11.1 |
rcPortLockLockedPortsThe set of ports that are administratively locked.
Locked ports cannot be modified in anyway until the
port is unlocked first.rw PortSet (RAPID-CITY) .1.3.6.1.4.1.2272.1.4.11.2 |
rcTestExtTableTest extension table. This table augments the
standard ifTestTable table in RFC1573. SEQUENCE OF RcTestEntry .1.3.6.1.4.1.2272.1.11.1 |
rcTestEntryProprietary test variables. RcTestEntry .1.3.6.1.4.1.2272.1.11.1.1 |
rcTestExtIfIndexThe index value which uniquely identifies the
interface to which this entry is applicable.
The interface identified by a particular value
of this index is the same interface as
identified by the same value of ifIndex.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2272.1.11.1.1.1 |
rcTestExtPassCountThe number of iterations of the test case that
completed successfully.ro Integer32 .1.3.6.1.4.1.2272.1.11.1.1.2 |
rcTestExtFailCountThe number of iterations of the test case that
failed.ro Integer32 .1.3.6.1.4.1.2272.1.11.1.1.3 |
rcTestTypes OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.11.2 |
rcTestTypesFabric OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.11.2.1 |
rcTestTypesArTable OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.11.2.2 |
rcTestTypesExtLoopBack OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.11.2.3 |
rcTestCodes OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.11.3 |
rcTestCodesNoReceive OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.11.3.1 |
rcTestCodesBadSeq OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.11.3.2 |
rcTestCodesBadLen OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.11.3.3 |
rcTestCodesBadData OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.11.3.4 |
rcStatTableA table used to store port statistics. SEQUENCE OF RcStatEntry .1.3.6.1.4.1.2272.1.12.1 |
rcStatEntryinterface counters RcStatEntry .1.3.6.1.4.1.2272.1.12.1.1 |
rcStatPortIndexAn index value that uniquely identifies a port.
This value is similar to ifIndex in MIB2.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2272.1.12.1.1.1 |
rcStatFrameTooShortsThe total number of frames that are too short
that were encountered on this interface.ro Counter32 .1.3.6.1.4.1.2272.1.12.1.1.2 |
rcStatBridgeInUnicastFramesThe total number of incoming unicast frames that
were bridged.ro Counter32 .1.3.6.1.4.1.2272.1.12.1.1.3 |
rcStatBridgeInMulticastFramesThe total number of incoming multicast frames that
were bridged.ro Counter32 .1.3.6.1.4.1.2272.1.12.1.1.4 |
rcStatBridgeInBroadcastFramesThe total number of incoming broadcast frames that
were bridged.ro Counter32 .1.3.6.1.4.1.2272.1.12.1.1.5 |
rcStatBridgeInDiscardsThe total number of frames that were discarded by
the bridging entity.ro Counter32 .1.3.6.1.4.1.2272.1.12.1.1.6 |
rcStatBridgeOutUnicastFramesThe total number of outgoing unicast frames that
were bridged.ro Counter32 .1.3.6.1.4.1.2272.1.12.1.1.7 |
rcStatBridgeOutMulticastFramesThe total number of outgoing multicast frames that
were bridged.ro Counter32 .1.3.6.1.4.1.2272.1.12.1.1.8 |
rcStatBridgeOutBroadcastFramesThe total number of outgoing broadcast frames that
were bridged.ro Counter32 .1.3.6.1.4.1.2272.1.12.1.1.9 |
rcStatRouteInUnicastFramesThe total number of incoming unicast frames that
were routed.ro Counter32 .1.3.6.1.4.1.2272.1.12.1.1.10 |
rcStatRouteInMulticastFramesThe total number of incoming multicast frames that
were routed.ro Counter32 .1.3.6.1.4.1.2272.1.12.1.1.11 |
rcStatRouteInDiscardsThe total number of frames that were discarded by
the routing entity.ro Counter32 .1.3.6.1.4.1.2272.1.12.1.1.12 |
rcStatRouteOutUnicastFramesThe total number of outgoing unicast frames that
were routed.ro Counter32 .1.3.6.1.4.1.2272.1.12.1.1.13 |
rcStatRouteOutMulticastFramesThe total number of outgoing multicast frames that
were routed.ro Counter32 .1.3.6.1.4.1.2272.1.12.1.1.14 |
rcStatStgForwardTransitionsThe number of times this port has transitioned
from the Learning state to the Forwarding state.ro Counter32 .1.3.6.1.4.1.2272.1.12.1.1.15 |
rcStatStgInConfigBpdusro Counter32 .1.3.6.1.4.1.2272.1.12.1.1.16 |
rcStatStgInTcnBpdusro Counter32 .1.3.6.1.4.1.2272.1.12.1.1.17 |
rcStatStgInBadBpdusro Counter32 .1.3.6.1.4.1.2272.1.12.1.1.18 |
rcStatStgOutConfigBpdusro Counter32 .1.3.6.1.4.1.2272.1.12.1.1.19 |
rcStatStgOutTcnBpdusro Counter32 .1.3.6.1.4.1.2272.1.12.1.1.20 |
rcStatBridgeOutFramesUsed by the Accelar 8000 product family to account
for all transmitted bridge unicast, broadcast, and
multicast packets. The individual counters are not
supported.ro Counter32 .1.3.6.1.4.1.2272.1.12.1.1.21 |