RC-IP-MIB
AI MIB Summary
The RC-IP-MIB module provides SNMP management capabilities for the Accelar product family, enabling the monitoring of IP network performance metrics, traffic statistics, and device operational states. This MIB facilitates the collection of interface counters, error rates, and session data essential for troubleshooting and capacity planning within the Accelar hardware environment.
Enterprise MIB for the Accelar product family.
Main OID:
rcIpMib.1.3.6.1.4.1.2272.1.8.0
178
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
178 total| Object Name |
|---|
rcIpMibEnterprise MIB for the Accelar product family. MODULE-IDENTITY .1.3.6.1.4.1.2272.1.8.0 |
rcIpConf OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.8.1 |
rcIpConfTableA table used to maintain IP routing information
for a particular interface. SEQUENCE OF RcIpConfEntry .1.3.6.1.4.1.2272.1.8.1.1 |
rcIpConfEntryEntry containing IP routing information. An entry
is automatically created in this table when routing
is enabled for an interface -or- when an ip address
is configured on an interface. RcIpConfEntry .1.3.6.1.4.1.2272.1.8.1.1.1 |
rcIpConfIfIndexAn unique value to identify a physical interface
or a logical interface (VLAN).ro InterfaceIndexOrZero .1.3.6.1.4.1.2272.1.8.1.1.1.1 |
rcIpConfAdvertDefRteUsed to indicate whether this interface should
advertize a RIP default route.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.1.1.1.2 |
rcIpConfAcceptDefRteUsed to indicate whether this interface should
accept a RIP default route.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.1.1.1.3 |
rcIpConfRowStatusRow status for this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.1.1.1.4 |
rcIpConfRipEnableEnable or disable RIP routing on the specified
interface.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.1.1.1.5 |
rcIpConfOspfEnableEnable or disable OSPF routing on the specified
interface.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.1.1.1.6 |
rcIpConfIgmpEnableEnable or disable IGMP on the specified
interface.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.1.1.1.7 |
rcIpConfAddrAssignedIndicate whether IpAddress has been assigned
for this interface.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.1.1.1.8 |
rcIpConfDhcpEnableEnable or disable DHCP on the specified
interface.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.1.1.1.9 |
rcIpConfTriggeredUpdateEnableUsed to indicate whether the RIP triggered update
feature should be enabled on this interface.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.1.1.1.10 |
rcIpConfAutoAggrerateEnableUsed to indicate whether the auto aggregation
feature should be enabled on this interface.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.1.1.1.11 |
rcIpConfGenerateDefaultRouteUsed to indicate whether to generate a default
RIP route on this interface.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.1.1.1.12 |
rcIpConfAdvertiseWhenDownThe value is used indicated whether vlan state change
should be notified to layer 3 or not, provided the vlan
is configured as routable interface. Also used for
single routable ports, in that case the criteria for
state is PortOperStatus.
Vlan is considered as UP if atleast one member of the
port based vlan has link up, or atleast one port member
of the policy based has an entry in the MGID or atleast
one static member of the policy based vlan has link up.
Otherwise, vlan is considered as DOWN.
If the value is 'true' then the interface state change
will not be notified to layer 3. (i.e., it always stays
up). If the value is 'false' then the vlan state change
will be notified to layer 3 so that IP related status
reflects routable interface state.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.1.1.1.13 |
rcIpConfDirectBroadcastEnableUsed to indicate whether this interface should
forward direct broadcast trafficrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.1.1.1.14 |
rcIpConfRipInPolicyUsed to indicate whether this interface should
advertize a RIP default route.rw DisplayString .1.3.6.1.4.1.2272.1.8.1.1.1.15 |
rcIpConfRipOutPolicyUsed to indicate whether this interface should
accept a RIP default route.rw DisplayString .1.3.6.1.4.1.2272.1.8.1.1.1.16 |
rcIpConfOspfIfTypeOSPF Interface Type.rw Enumeration .1.3.6.1.4.1.2272.1.8.1.1.1.17 |
rcIpConfRipCostUsed to indicate the rip cost for this interface.rw INTEGER .1.3.6.1.4.1.2272.1.8.1.1.1.18 |
rcIpConfRipHolddownUsed to indicate the rip holddown timer for this
interfacerw INTEGER .1.3.6.1.4.1.2272.1.8.1.1.1.19 |
rcIpConfRipTimeoutUsed to indicate the rip timeout interval for this
interfacerw INTEGER .1.3.6.1.4.1.2272.1.8.1.1.1.20 |
rcIpConfRsmltEnableUsed to enable Route Smlt feature.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.1.1.1.21 |
rcIpConfReversePathCheckEnableUsed to indicate whether this interface should
perform Reverse Path Checkrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.1.1.1.22 |
rcIpConfReversePathCheckModeReverse Path Checking mode.rw Enumeration .1.3.6.1.4.1.2272.1.8.1.1.1.23 |
rcIpConfIsisEnableEnable/disable Isis on this IP interfacerw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.1.1.1.24 |
rcIpConfGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.8.1.6 |
rcIpConfGlobalRipHoldDownTimeUsed to set the system-wide RIP hold down time
in seconds.rw INTEGER .1.3.6.1.4.1.2272.1.8.1.6.1 |
rcIpConfGlobalIcmpNetUnreachUsed to set the icmp net unreach feature
enable/disable.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.1.6.2 |
rcIpConfGlobalEcmpEnableUsed to set the ecmp enable/disable.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.1.6.3 |
rcIpConfGlobalEcmpMaxPathUsed to globally configure maximum ECMP paths number.rw INTEGER .1.3.6.1.4.1.2272.1.8.1.6.4 |
rcIpConfGlobalAlternativeEnableUsed to globally configure alternative enable.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.1.6.5 |
rcIpConfGlobalRouteDiscoveryEnableEnable/disable ICMP Route Discovery featurerw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.1.6.6 |
rcIpConfGlobalRipTimeOutIntervalRip TimeOut Interval in secondsrw INTEGER .1.3.6.1.4.1.2272.1.8.1.6.8 |
rcIpConfGlobalRipDefImportMetricRip def import metricrw INTEGER .1.3.6.1.4.1.2272.1.8.1.6.9 |
rcIpConfGlobalEcmp1PathListRoutes to networks specified in this prefix-list
can have upto 1 ECMP path, irrespective of
ecmp-max-path configurationrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.1.6.10 |
rcIpConfGlobalEcmp2PathListRoutes to networks specified in this prefix-list
can have upto 2 ECMP path, irrespective of
ecmp-max-path configuration.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.1.6.11 |
rcIpConfGlobalEcmp3PathListRoutes to networks specified in this prefix-list
can have upto 3 ECMP path, irrespective of
ecmp-max-path configuration.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.1.6.12 |
rcIpConfGlobalEcmp4PathListRoutes to networks specified in this prefix-list
can have upto 4 ECMP path, irrespective of
ecmp-max-path configuration.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.1.6.13 |
rcIpConfGlobalEcmpPathListApplyThis is to apply any changes in ECMP path list
configuration or in the prefix-lists configured to
be used as path listrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.1.6.14 |
rcIpConfGlobalIcmpRedirectMsgrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.1.6.15 |
rcIpConfGlobalMulticastMacFloodingStatusrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.1.6.16 |
rcIpConfGlobalArpThresholdDefines the maximum number of outstanding arp request
a switch can generate.rw INTEGER .1.3.6.1.4.1.2272.1.8.1.6.17 |
rcIpConfGlobalAllowMoreSpecificNonLocalRouteEnableUsed to determine whether more specific non local routes will go into the routing table.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.1.6.18 |
rcIpConfGlobalUdpCheckSumEnableEnable/disable UDP checksum calculation.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.1.6.19 |
rcIpConfV2TableA table used to maintain IP routing information
for a particular interface.deprecated SEQUENCE OF RcIpConfV2Entry .1.3.6.1.4.1.2272.1.8.1.8 |
rcIpConfV2EntryEntry containing IP routing information. An entry
is automatically created in this table when routing
is enabled for an interface -or- when an ip address
is configured on an interface.deprecated RcIpConfV2Entry .1.3.6.1.4.1.2272.1.8.1.8.1 |
rcIpConfV2IndexAn unique value to identify a physical interface
or a logical interface (VLAN).rodeprecated InterfaceIndexOrZero .1.3.6.1.4.1.2272.1.8.1.8.1.1 |
rcIpConfV2AddrIp interface address.rodeprecated IpAddress .1.3.6.1.4.1.2272.1.8.1.8.1.2 |
rcIpConfV2RowStatusRow status for this entry.rwdeprecated RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.1.8.1.3 |
rcIpConfV2AdvertDefRteUsed to indicate whether this interface should
advertize a RIP default route.rwdeprecated TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.1.8.1.4 |
rcIpConfV2AcceptDefRteUsed to indicate whether this interface should
accept a RIP default route.rwdeprecated TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.1.8.1.5 |
rcIpConfV2RipEnableEnable or disable RIP routing on the specified
interface.rwdeprecated TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.1.8.1.6 |
rcIpConfV2OspfEnableEnable or disable OSPF routing on the specified
interface.rwdeprecated TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.1.8.1.7 |
rcIpConfV2IgmpEnableEnable or disable IGMP on the specified
interface.rwdeprecated TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.1.8.1.8 |
rcIpConfV2AddrAssignedIndicate whether IpAddress has been assigned
for this interface.rodeprecated TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.1.8.1.9 |
rcIpConfV2TriggeredUpdateEnableUsed to indicate whether the RIP triggered update
feature should be enabled on this interface.rwdeprecated TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.1.8.1.10 |
rcIpConfV2RipAutoAggrerateEnableUsed to indicate whether the auto aggregation
feature should be enabled on this interface.rwdeprecated TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.1.8.1.11 |
rcIpConfV2RipGenerateDefaultRouteUsed to indicate whether to generate a default
RIP route on this interface.rwdeprecated TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.1.8.1.12 |
rcIpConfV2AdvertiseWhenDownThe value is used indicated whether vlan state change
should be notified to layer 3 or not, provided the vlan
is configured as routable interface. Also used for
single routable ports, in that case the criteria for
state is PortOperStatus.
Vlan is considered as UP if atleast one member of the
port based vlan has link up, or atleast one port member
of the policy based has an entry in the MGID or atleast
one static member of the policy based vlan has link up.
Otherwise, vlan is considered as DOWN.
If the value is 'true' then the interface state change
will not be notified to layer 3. (i.e., it always stays
up). If the value is 'false' then the vlan state change
will be notified to layer 3 so that IP related status
reflects routable interface state.rwdeprecated TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.1.8.1.13 |
rcIpConfRsmltTableA table used to maintain OSPF summary route
metric parameter for a particular Area range. SEQUENCE OF RcIpConfRsmltEntry .1.3.6.1.4.1.2272.1.8.1.11 |
rcIpConfRsmltEntryEntry containing OSPF summary route metric
parameter for a particular Area range.
An entry is automatically created in this
table when an area range is configured through
ospfAreaAggregateTable in rfc1850rcc.mib RcIpConfRsmltEntry .1.3.6.1.4.1.2272.1.8.1.11.1 |
rcIpConfRsmltIfIndexInterface Index, this is an index of the table.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2272.1.8.1.11.1.1 |
rcIpConfRsmltHoldDownTimerTimer value, the range of value is from 0 to 3600.rw INTEGER .1.3.6.1.4.1.2272.1.8.1.11.1.2 |
rcIpConfRsmltHoldUpTimerThe range of value 0 to 3600 or 9999. 9999 means
infinity.rw INTEGER (0..3600 | 9999) .1.3.6.1.4.1.2272.1.8.1.11.1.3 |
rcIpConfRsmltRowStatusRow Status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.1.11.1.4 |
rcIpAddrTableThe table of addressing information relevant to
this entity's IP addresses.
This table is identical to the ipAddrTable in
MIB2 except the columns rcIpAdEntIfIndex and
rcIpAdEntAddr are reversed. Also, the table
is indexed by both these variables. SEQUENCE OF RcIpAddrEntry .1.3.6.1.4.1.2272.1.8.2 |
rcIpAddrEntryThe addressing information for one of this
entity's IP addresses. RcIpAddrEntry .1.3.6.1.4.1.2272.1.8.2.1 |
rcIpAdEntIfIndexThe index value which uniquely identifies the
interface to which this entry is applicable. The
interface identified by a particular value of this
index is the same interface as identified by the
same value of ifIndex.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2272.1.8.2.1.1 |
rcIpAdEntAddrThe IP address to which this entry's addressing
information pertains.ro IpAddress .1.3.6.1.4.1.2272.1.8.2.1.2 |
rcIpAdEntNetMaskThe subnet mask associated with the IP address of
this entry. The value of the mask is an IP
address with all the network bits set to 1 and all
the hosts bits set to 0.rw IpAddress .1.3.6.1.4.1.2272.1.8.2.1.3 |
rcIpAdEntBcastAddrFormatThe IP broadcast address format used on this
interface.ro Enumeration .1.3.6.1.4.1.2272.1.8.2.1.4 |
rcIpAdEntReasmMaxSizeThe size of the largest IP datagram which this
entity can re-assemble from incoming IP fragmented
datagrams received on this interface.ro INTEGER .1.3.6.1.4.1.2272.1.8.2.1.5 |
rcIpAdEntRowStatusUsed to create/delete entriesrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.2.1.6 |
rcIpAdEntVlanIdA value that uniquely identifies the Virtual LAN
associated with this entry. This value corresponds
to the lower 12 bits in the IEEE 802.1Q VLAN Tag.rw INTEGER .1.3.6.1.4.1.2272.1.8.2.1.7 |
rcIpAdEntBrouterPortUsed to indicate whether this entry correponds
to a brouter port (as oppose to a routable VLAN).
This value cannot be changed after the row is
created.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.2.1.8 |
rcIpAdEntMacOffsetUsed to translate the ip address into mac address.
The system has 512 mac addresses of which 0-507 are reserved
for Boardwalk box. 508-511 is reserved for MG. One can either
mention a mac offset while configuring an ip on the
vlan or it can be alloted by the system within the above
range.rw INTEGER .1.3.6.1.4.1.2272.1.8.2.1.9 |
rcIpAdEntIfTypeThe address entry IfType indicates the type of the
interface. In the case of circuit-less-IP there is
no association with any ports. In other words, it can
be thought of as a virtual interface. The value
'brouter port' indicates this interface is associated
with a specific physical port. The value 'vlan'
indicates a logical port that contains one or physical
ports/MLT ports.ro Enumeration .1.3.6.1.4.1.2272.1.8.2.1.10 |
rcIpAdEntSecondaryIfUsed to indicate whether this entry correponds
to a secondary interface (as oppose to a primary interface).
This value cannot be changed after the row is
created.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.2.1.11 |
rcIpFlowTableIpFlow Table. This table contain entries that
correspond to RSVP records in the switching
fabric Address Resolution table.
A connection that has a matching entry in this
table will be processed with a higher priority
than connections that do not have an entry. SEQUENCE OF RcIpFlowEntry .1.3.6.1.4.1.2272.1.8.3 |
rcIpFlowEntryProprietary flow control variables. RcIpFlowEntry .1.3.6.1.4.1.2272.1.8.3.1 |
rcIpFlowSrcIpAddressThe source IP address of an IP packet.ro IpAddress .1.3.6.1.4.1.2272.1.8.3.1.1 |
rcIpFlowSrcIpPortThe source port of an IP packet. A zero value
in this field is used as a wildcard value.ro INTEGER .1.3.6.1.4.1.2272.1.8.3.1.2 |
rcIpFlowDstIpAddressThe destination IP address of an IP packet.ro IpAddress .1.3.6.1.4.1.2272.1.8.3.1.3 |
rcIpFlowDstIpPortThe destination port of an IP packet. A zero
value in this field is used as a wildcard value.ro INTEGER .1.3.6.1.4.1.2272.1.8.3.1.4 |
rcIpFlowProtocolThe protocol type of an IP packet. A zero value
in this field is used as a wildcard value.ro Enumeration .1.3.6.1.4.1.2272.1.8.3.1.5 |
rcIpFlowRowStatusStatus of entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.3.1.6 |
rcIpRouting OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.8.4 |
rcIpConfDhcpTableDHCP configuration table SEQUENCE OF RcIpConfDhcpEntry .1.3.6.1.4.1.2272.1.8.8 |
rcIpConfDhcpEntryUsed to configure DHCP on a particular port. An
entry is created automatically when the variable
rcIpConfDhcpEnable is set to TRUE.
Once created this entry will only be deleted if the
rcIpConfDhcpRowStatus is set to 'destroy(6)'. In
which case, the rcIpConfDhcpEnable is automatically
reset to the FALSE setting. RcIpConfDhcpEntry .1.3.6.1.4.1.2272.1.8.8.1 |
rcIpConfDhcpIfIndexInterface number. The number can represent either
a physical or logical(VLAN) interface.ro InterfaceIndexOrZero .1.3.6.1.4.1.2272.1.8.8.1.1 |
rcIpConfDhcpMaxHopUsed to indicate the maximum number of hops a
DHCP packet can take from the source device to
the destination device (i.e., DHCP client to
DHCP server).rw INTEGER .1.3.6.1.4.1.2272.1.8.8.1.2 |
rcIpConfDhcpMinSecUsed to indicate the minimum number of seconds
to wait between receiving a DHCP packet and
actually forwarding the DHCP packet to the
destination device. A value of zero(0) indicates
forwarding should be done immediately without any
delay.rw INTEGER .1.3.6.1.4.1.2272.1.8.8.1.3 |
rcIpConfDhcpModeUsed to indicate what type of DHCP packets this
interface should support. A value of none(1) will
result in all incoming DHCP and BOOTP packets to
be dropped.rw Enumeration .1.3.6.1.4.1.2272.1.8.8.1.4 |
rcIpConfDhcpRowStatusAn entry is created automatically when the variable
rcIpConfDhcpEnable is set to TRUE.
Once created this entry will only be deleted if the
rcIpConfDhcpRowStatus is set to 'destroy(6)'. In
which case, the rcIpConfDhcpEnable is automatically
reset to the FALSE setting.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.8.1.5 |
rcIpConfDhcpNumRequestsThe total number of DHCP requests seen on this interface.ro Counter32 .1.3.6.1.4.1.2272.1.8.8.1.6 |
rcIpConfDhcpNumRepliesThe total number of DHCP replies seen on this interface.ro Counter32 .1.3.6.1.4.1.2272.1.8.8.1.7 |
rcIpConfDhcpAlwaysBroadcastUsed to indicate if DHCP Reply packets should be
broadcast to the DHCP client on this interface.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.8.1.8 |
rcIpDhcpForwardTableDHCP forwarding table. SEQUENCE OF RcIpDhcpForwardEntry .1.3.6.1.4.1.2272.1.8.9 |
rcIpDhcpForwardEntryAn entry used represents a DHCP forwarding directive. RcIpDhcpForwardEntry .1.3.6.1.4.1.2272.1.8.9.1 |
rcIpDhcpForwardAgentAddrThe IP address configured on an interface
(i.e., a locally configured IP address).ro IpAddress .1.3.6.1.4.1.2272.1.8.9.1.1 |
rcIpDhcpForwardServerAddrThe IP address of the DHCP server. If this
IP address corresponds to a locally configured
IP network, the DHCP packet is broadcasted out
the interface the IP address is assigned to.
This behavior is known as 'relay agent' mode.
If this IP address is a remote address, the DHCP
packet is sent via unicast to the remote device.
This behavior is known as 'preferred server' mode.ro IpAddress .1.3.6.1.4.1.2272.1.8.9.1.2 |
rcIpDhcpForwardEnableUsed to indicate whether is entry should be used.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.9.1.3 |
rcIpDhcpForwardModeUsed to indicate whether this entry pertains to
BOOTP packets, DHCP packets, or both.rw Enumeration .1.3.6.1.4.1.2272.1.8.9.1.4 |
rcIpDhcpForwardRowStatusRow status of this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.9.1.5 |
rcIpFilter OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.8.10 |
rcIpPolicy OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.8.11 |
rcIpDvmrp OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.8.12 |
rcIpUdp OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.8.13 |
rcIpTosRule OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.8.14 |
rcIpTosRuleAndMaskAnd Mask. The Ip ToS byte in the Ip header
is logically ANDed with this value, and then logically
ORed with the one of the OrRules below.rwdeprecated INTEGER .1.3.6.1.4.1.2272.1.8.14.1 |
rcIpTosRuleOrRule1Quid/Gid Or rule #1. The Ip ToS byte in the Ip header
is logically ORed with this value.rwdeprecated INTEGER .1.3.6.1.4.1.2272.1.8.14.2 |
rcIpTosRuleOrRule2Quid/Gid Or rule #2. The Ip ToS byte in the Ip header
is logically ORed with this value.rwdeprecated INTEGER .1.3.6.1.4.1.2272.1.8.14.3 |
rcIpTosRuleOrRule3Quid/Gid Or rule #3. The Ip ToS byte in the Ip header
is logically ORed with this value.rwdeprecated INTEGER .1.3.6.1.4.1.2272.1.8.14.4 |
rcIpTosRuleTosPriorityEnableEnable Tos priority.rwdeprecated TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.14.5 |
rcIpTosRuleTosThresholdtos thresholdrodeprecated Enumeration .1.3.6.1.4.1.2272.1.8.14.6 |
rcIpStaticRoute OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.8.15 |
rcIpPim OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.8.16 |
rcIpCops OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.8.19 |
rcCopsGlobalEnableCops feature enable/disablerwdeprecated TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.19.1 |
rcIpRipInterface OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.8.20 |
rcIpConfIcmpRdiscTableA table used to maintain ICMP Route discovery information
for a particular interface. SEQUENCE OF RcIpConfIcmpRdiscEntry .1.3.6.1.4.1.2272.1.8.22 |
rcIpConfIcmpRdiscEntryEntry containing ICMP Rdisc information. An entry is
automatically created in this table when routing
is enabled for an interface -or- when an ip address
is configured on an interface. RcIpConfIcmpRdiscEntry .1.3.6.1.4.1.2272.1.8.22.1 |
rcIpConfIcmpRdiscIfIndexAn unique value to identify a physical
interface or a logical interface (VLAN).ro INTEGER .1.3.6.1.4.1.2272.1.8.22.1.1 |
rcIpConfIcmpRdiscAdvAddressAdvertisement address to which the route discovery
advertisements transmitted on this interface.rw IpAddress .1.3.6.1.4.1.2272.1.8.22.1.2 |
rcIpConfIcmpRdiscAdvFlagFlag to indicate whether or not the address is to
be advertised on this interface.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.22.1.3 |
rcIpConfIcmpRdiscAdvLifetimeThe value to be placed in the lifetime field of
Router Advertisements sent from the interface.rw INTEGER .1.3.6.1.4.1.2272.1.8.22.1.4 |
rcIpConfIcmpRdiscMaxAdvIntervalThe maximum time allowed between sending
Router Advertisements from this interface.rw INTEGER .1.3.6.1.4.1.2272.1.8.22.1.5 |
rcIpConfIcmpRdiscMinAdvIntervalThe minimum time allowed between sending
Router Advertisements from this interface.rw INTEGER .1.3.6.1.4.1.2272.1.8.22.1.6 |
rcIpConfIcmpRdiscPreferenceLevelPreferability of the router address as a default
Routerrw INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.2272.1.8.22.1.7 |
rcIpMulticastSoftwareForwarding OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.8.23 |
rcIpMrouteHw OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.8.24 |
rcIpResourceUsage OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.8.25 |
rcIpResourceUsageGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.8.25.1 |
rcIpResourceUsageGlobalIngressRecInUseUsed to get the Ingress Record Usage in the switch.
(S-G usage).ro INTEGER .1.3.6.1.4.1.2272.1.8.25.1.1 |
rcIpResourceUsageGlobalEgressRecInUseUsed to get the Egress Record Usage in the switch
(pepstream count).ro INTEGER .1.3.6.1.4.1.2272.1.8.25.1.2 |
rcIpResourceUsageGlobalIngressThresholdUsed to get the threshold count for Ingress records.rw INTEGER .1.3.6.1.4.1.2272.1.8.25.1.3 |
rcIpResourceUsageGlobalEgressThresholdUsed to get threshold count for egress records.rw INTEGER .1.3.6.1.4.1.2272.1.8.25.1.4 |
rcIpResourceUsageGlobalSendTrapAndLogA means of alerting the user. If this bool is set,
a message will be send to console and also a
duReport will be logged.rw EnableValue (RAPID-CITY) .1.3.6.1.4.1.2272.1.8.25.1.5 |
rcIpResourceUsageGlobalSendTrapOnlyA means of alerting the user. If this bool is set,
a message will be send to console.rw EnableValue (RAPID-CITY) .1.3.6.1.4.1.2272.1.8.25.1.6 |
rcIpResourceUsageGlobalLogMsgOnlyA means of alerting the user.If this bool is set,
a duReport will be logged.rw EnableValue (RAPID-CITY) .1.3.6.1.4.1.2272.1.8.25.1.7 |
rcIpRsmlt OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.8.26 |
rcIpRsmltGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.8.26.1 |
rcIpRsmltGlobalTableSizeRoute Smlt table size.ro Integer32 .1.3.6.1.4.1.2272.1.8.26.1.1 |
rcIpRsmltOperTableRoute Smlt Table SEQUENCE OF RcIpRsmltOperEntry .1.3.6.1.4.1.2272.1.8.26.2 |
rcIpRsmltOperEntryAn entry of Ip As Path Access List Table. RcIpRsmltOperEntry .1.3.6.1.4.1.2272.1.8.26.2.1 |
rcIpRsmltOperIfIndexRoute Smlt Oper IfIndex.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2272.1.8.26.2.1.1 |
rcIpRsmltOperAdminStatusis a enable/disable flag.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.26.2.1.2 |
rcIpRsmltOperHoldDownTimerTimer value, the range of value is from 0 to 3600.rw INTEGER .1.3.6.1.4.1.2272.1.8.26.2.1.3 |
rcIpRsmltOperHoldDownTimeRemainingThe time value that indicate how much time
remaining of HoldDownTimer.ro INTEGER .1.3.6.1.4.1.2272.1.8.26.2.1.4 |
rcIpRsmltOperHoldUpTimerThe range of value 0 to 3600 or 9999. 9999 means
infinity.rw INTEGER (0..3600 | 9999) .1.3.6.1.4.1.2272.1.8.26.2.1.5 |
rcIpRsmltOperHoldUpTimeRemainingThe time value that indicate how much time
remaining of HoldUpTimer.ro INTEGER (0..3600 | 9999) .1.3.6.1.4.1.2272.1.8.26.2.1.6 |
rcIpRsmltOperIpAddrIP Interface with RSMLT on.ro IpAddress .1.3.6.1.4.1.2272.1.8.26.2.1.7 |
rcIpRsmltOperOperStatusThe operation status of Rsmlt, up or down.ro Enumeration .1.3.6.1.4.1.2272.1.8.26.2.1.8 |
rcIpRsmltOperSmltIdThe id range for SMLT is 1-32.ro IdList (RAPID-CITY) .1.3.6.1.4.1.2272.1.8.26.2.1.9 |
rcIpRsmltOperSltIdThe id range for SLT is 1-512.ro IdList (RAPID-CITY) .1.3.6.1.4.1.2272.1.8.26.2.1.10 |
rcIpRsmltOperVlanIdVlan id.ro INTEGER .1.3.6.1.4.1.2272.1.8.26.2.1.11 |
rcIpRsmltOperMacAddrMac Address.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.26.2.1.12 |
rcIpRsmltOperRowStatusRow Status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.26.2.1.13 |
rcIpRsmltPeerTableRoute Smlt Table SEQUENCE OF RcIpRsmltPeerEntry .1.3.6.1.4.1.2272.1.8.26.3 |
rcIpRsmltPeerEntryAn entry of Ip As Path Access List Table. RcIpRsmltPeerEntry .1.3.6.1.4.1.2272.1.8.26.3.1 |
rcIpRsmltPeerIfIndexRoute Smlt Oper IfIndex.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2272.1.8.26.3.1.1 |
rcIpRsmltPeerAdminStatusis a enable/disable flag.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.26.3.1.2 |
rcIpRsmltPeerHoldDownTimerTimer value, the range of value is from 0 to 3600.ro INTEGER .1.3.6.1.4.1.2272.1.8.26.3.1.3 |
rcIpRsmltPeerHoldDownTimeRemainingThe time value that indicate how much time
remaining of HoldDownTimer.ro INTEGER .1.3.6.1.4.1.2272.1.8.26.3.1.4 |
rcIpRsmltPeerHoldUpTimerThe range of value 0 to 3600 or 9999. 9999 means
infinity.ro INTEGER (0..3600 | 9999) .1.3.6.1.4.1.2272.1.8.26.3.1.5 |
rcIpRsmltPeerHoldUpTimeRemainingThe time value that indicate how much time
remaining of HoldUpTimer.ro INTEGER (0..3600 | 9999) .1.3.6.1.4.1.2272.1.8.26.3.1.6 |
rcIpRsmltPeerIpAddrIP Interface with RSMLT on.ro IpAddress .1.3.6.1.4.1.2272.1.8.26.3.1.7 |
rcIpRsmltPeerOperStatusThe operation status of Rsmlt, up or down.ro Enumeration .1.3.6.1.4.1.2272.1.8.26.3.1.8 |
rcIpRsmltPeerSmltIdThe id range for SMLT is 1-32.ro IdList (RAPID-CITY) .1.3.6.1.4.1.2272.1.8.26.3.1.9 |
rcIpRsmltPeerSltIdThe id range for SLT is 1-512.ro IdList (RAPID-CITY) .1.3.6.1.4.1.2272.1.8.26.3.1.10 |
rcIpRsmltPeerVlanIdVlan id.ro INTEGER .1.3.6.1.4.1.2272.1.8.26.3.1.11 |
rcIpRsmltPeerMacAddrMac Address.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.26.3.1.12 |
rcIpGenPolicy OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.8.100 |
rcIpBgp OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.8.101 |
rcIpMpls OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.8.102 |