ATM-TC-MIB

AI MIB Summary

ATM-TC-MIB defines standardized textual conventions and object identities to ensure consistent data modeling for Asynchronous Transfer Mode (ATM) network devices, including switches, routers, and multiplexers. These definitions enable network management systems to accurately interpret and monitor ATM-specific parameters such as virtual circuit states, traffic shaping profiles, and physical layer signaling attributes across multi-vendor environments.

This MIB Module provides Textual Conventions and OBJECT-IDENTITY Objects to be used by ATM systems.

Main OID:

atmTCMIB.1.3.6.1.2.1.37.3

Objects

Active

Status

Dependencies

Imported Objects

SNMPv2-SMI

SNMPv2-TC

Objects

18 total

Object Name	Syntax	OID
atmTrafficDescriptorTypes OBJECT IDENTIFIER `.1.3.6.1.2.1.37.1.1`	OBJECT IDENTIFIER	`.1.3.6.1.2.1.37.1.1`
atmNoTrafficDescriptorThis identifies the no ATM traffic descriptor type. Parameters 1, 2, 3, 4, and 5 are not used. This traffic descriptor type can be used for best effort traffic.deprecated OBJECT IDENTIFIER `.1.3.6.1.2.1.37.1.1.1`	OBJECT IDENTIFIER	`.1.3.6.1.2.1.37.1.1.1`
atmNoClpNoScrThis traffic descriptor type is for no CLP and no Sustained Cell Rate. The use of the parameter vector for this type: Parameter 1: peak cell rate in cells/second for CLP=0+1 traffic Parameter 2: not used Parameter 3: not used Parameter 4: not used Parameter 5: not used. OBJECT IDENTIFIER `.1.3.6.1.2.1.37.1.1.2`	OBJECT IDENTIFIER	`.1.3.6.1.2.1.37.1.1.2`
atmClpNoTaggingNoScrThis traffic descriptor is for CLP without tagging and no Sustained Cell Rate. The use of the parameter vector for this type: Parameter 1: peak cell rate in cells/second for CLP=0+1 traffic Parameter 2: peak cell rate in cells/second for CLP=0 traffic Parameter 3: not used Parameter 4: not used Parameter 5: not used.deprecated OBJECT IDENTIFIER `.1.3.6.1.2.1.37.1.1.3`	OBJECT IDENTIFIER	`.1.3.6.1.2.1.37.1.1.3`
atmClpTaggingNoScrThis traffic descriptor is for CLP with tagging and no Sustained Cell Rate. The use of the parameter vector for this type: Parameter 1: peak cell rate in cells/second for CLP=0+1 traffic Parameter 2: peak cell rate in cells/second for CLP=0 traffic, excess tagged as CLP=1 Parameter 3: not used Parameter 4: not used Parameter 5: not used.deprecated OBJECT IDENTIFIER `.1.3.6.1.2.1.37.1.1.4`	OBJECT IDENTIFIER	`.1.3.6.1.2.1.37.1.1.4`
atmNoClpScrThis traffic descriptor type is for no CLP with Sustained Cell Rate. The use of the parameter vector for this type: Parameter 1: peak cell rate in cells/second for CLP=0+1 traffic Parameter 2: sustainable cell rate in cells/second for CLP=0+1 traffic Parameter 3: maximum burst size in cells Parameter 4: not used Parameter 5: not used. OBJECT IDENTIFIER `.1.3.6.1.2.1.37.1.1.5`	OBJECT IDENTIFIER	`.1.3.6.1.2.1.37.1.1.5`
atmClpNoTaggingScrThis traffic descriptor type is for CLP with Sustained Cell Rate and no tagging. The use of the parameter vector for this type: Parameter 1: peak cell rate in cells/second for CLP=0+1 traffic Parameter 2: sustainable cell rate in cells/second for CLP=0 traffic Parameter 3: maximum burst size in cells Parameter 4: not used Parameter 5: not used. OBJECT IDENTIFIER `.1.3.6.1.2.1.37.1.1.6`	OBJECT IDENTIFIER	`.1.3.6.1.2.1.37.1.1.6`
atmClpTaggingScrThis traffic descriptor type is for CLP with tagging and Sustained Cell Rate. The use of the parameter vector for this type: Parameter 1: peak cell rate in cells/second for CLP=0+1 traffic Parameter 2: sustainable cell rate in cells/second for CLP=0 traffic, excess tagged as CLP=1 Parameter 3: maximum burst size in cells Parameter 4: not used Parameter 5: not used. OBJECT IDENTIFIER `.1.3.6.1.2.1.37.1.1.7`	OBJECT IDENTIFIER	`.1.3.6.1.2.1.37.1.1.7`
atmClpNoTaggingMcrThis traffic descriptor type is for CLP with Minimum Cell Rate and no tagging. The use of the parameter vector for this type: Parameter 1: peak cell rate in cells/second for CLP=0+1 traffic Parameter 2: CDVT in tenths of microseconds Parameter 3: minimum cell rate in cells/second Parameter 4: unused Parameter 5: unused. OBJECT IDENTIFIER `.1.3.6.1.2.1.37.1.1.8`	OBJECT IDENTIFIER	`.1.3.6.1.2.1.37.1.1.8`
atmClpTransparentNoScrThis traffic descriptor type is for the CLP- transparent model and no Sustained Cell Rate. The use of the parameter vector for this type: Parameter 1: peak cell rate in cells/second for CLP=0+1 traffic Parameter 2: CDVT in tenths of microseconds Parameter 3: not used Parameter 4: not used Parameter 5: not used. This traffic descriptor type is applicable to connections following the CBR.1 conformance definition. Connections specifying this traffic descriptor type will be rejected at UNI 3.0 or UNI 3.1 interfaces. For a similar traffic descriptor type that can be accepted at UNI 3.0 and UNI 3.1 interfaces, see atmNoClpNoScr. OBJECT IDENTIFIER `.1.3.6.1.2.1.37.1.1.9`	OBJECT IDENTIFIER	`.1.3.6.1.2.1.37.1.1.9`
atmClpTransparentScrThis traffic descriptor type is for the CLP- transparent model with Sustained Cell Rate. The use of the parameter vector for this type: Parameter 1: peak cell rate in cells/second for CLP=0+1 traffic Parameter 2: sustainable cell rate in cells/second for CLP=0+1 traffic Parameter 3: maximum burst size in cells Parameter 4: CDVT in tenths of microseconds Parameter 5: not used. This traffic descriptor type is applicable to connections following the VBR.1 conformance definition. Connections specifying this traffic descriptor type will be rejected at UNI 3.0 or UNI 3.1 interfaces. For a similar traffic descriptor type that can be accepted at UNI 3.0 and UNI 3.1 interfaces, see atmNoClpScr. OBJECT IDENTIFIER `.1.3.6.1.2.1.37.1.1.10`	OBJECT IDENTIFIER	`.1.3.6.1.2.1.37.1.1.10`
atmNoClpTaggingNoScrThis traffic descriptor type is for no CLP with tagging and no Sustained Cell Rate. The use of the parameter vector for this type: Parameter 1: peak cell rate in cells/second for CLP=0+1 traffic Parameter 2: CDVT in tenths of microseconds Parameter 3: not used Parameter 4: not used Parameter 5: not used. This traffic descriptor type is applicable to connections following the UBR.2 conformance definition . OBJECT IDENTIFIER `.1.3.6.1.2.1.37.1.1.11`	OBJECT IDENTIFIER	`.1.3.6.1.2.1.37.1.1.11`
atmNoClpNoScrCdvtThis traffic descriptor type is for no CLP and no Sustained Cell Rate. The use of the parameter vector for this type: Parameter 1: peak cell rate in cells/second for CLP=0+1 traffic Parameter 2: CDVT in tenths of microseconds Parameter 3: not used Parameter 4: not used Parameter 5: not used. This traffic descriptor type is applicable to CBR connections following the UNI 3.0/3.1 conformance definition for PCR CLP=0+1. These CBR connections differ from CBR.1 connections in that the CLR objective applies only to the CLP=0 cell flow. This traffic descriptor type is also applicable to connections following the UBR.1 conformance definition. OBJECT IDENTIFIER `.1.3.6.1.2.1.37.1.1.12`	OBJECT IDENTIFIER	`.1.3.6.1.2.1.37.1.1.12`
atmNoClpScrCdvtThis traffic descriptor type is for no CLP with Sustained Cell Rate. The use of the parameter vector for this type: Parameter 1: peak cell rate in cells/second for CLP=0+1 traffic Parameter 2: sustainable cell rate in cells/second for CLP=0+1 traffic Parameter 3: maximum burst size in cells Parameter 4: CDVT in tenths of microseconds Parameter 5: not used. This traffic descriptor type is applicable to VBR connections following the UNI 3.0/3.1 conformance definition for PCR CLP=0+1 and SCR CLP=0+1. These VBR connections differ from VBR.1 connections in that the CLR objective applies only to the CLP=0 cell flow. OBJECT IDENTIFIER `.1.3.6.1.2.1.37.1.1.13`	OBJECT IDENTIFIER	`.1.3.6.1.2.1.37.1.1.13`
atmClpNoTaggingScrCdvtThis traffic descriptor type is for CLP with Sustained Cell Rate and no tagging. The use of the parameter vector for this type: Parameter 1: peak cell rate in cells/second for CLP=0+1 traffic Parameter 2: sustainable cell rate in cells/second for CLP=0 traffic Parameter 3: maximum burst size in cells Parameter 4: CDVT in tenths of microseconds Parameter 5: not used. This traffic descriptor type is applicable to connections following the VBR.2 conformance definition. OBJECT IDENTIFIER `.1.3.6.1.2.1.37.1.1.14`	OBJECT IDENTIFIER	`.1.3.6.1.2.1.37.1.1.14`
atmClpTaggingScrCdvtThis traffic descriptor type is for CLP with tagging and Sustained Cell Rate. The use of the parameter vector for this type: Parameter 1: peak cell rate in cells/second for CLP=0+1 traffic Parameter 2: sustainable cell rate in cells/second for CLP=0 traffic, excess tagged as CLP=1 Parameter 3: maximum burst size in cells Parameter 4: CDVT in tenths of microseconds Parameter 5: not used. This traffic descriptor type is applicable to connections following the VBR.3 conformance definition. OBJECT IDENTIFIER `.1.3.6.1.2.1.37.1.1.15`	OBJECT IDENTIFIER	`.1.3.6.1.2.1.37.1.1.15`
atmTCMIBThis MIB Module provides Textual Conventions and OBJECT-IDENTITY Objects to be used by ATM systems. MODULE-IDENTITY `.1.3.6.1.2.1.37.3`	MODULE-IDENTITY	`.1.3.6.1.2.1.37.3`
atmObjectIdentities OBJECT IDENTIFIER `.1.3.6.1.2.1.37.3.1`	OBJECT IDENTIFIER	`.1.3.6.1.2.1.37.3.1`