ALCATEL-IND1-DOT1X-MIB
AI MIB Summary
The ALCATEL-IND1-DOT1X-MIB provides SNMP management capabilities for the 802.1X Port Access Entity on Alcatel-Lucent Birds of Prey hardware, enabling monitoring of authentication states, session counts, and port security parameters.
This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB):
The Port Access Entity module for managing 802.1X for the Birds Of Prey Product Line
The right to make changes in specification and other information contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein.
Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used.
Copyright (C) 1995-2007 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE
Main OID:
alcatelIND1Dot1XMIB.1.3.6.1.4.1.6486.801.1.2.1.30.1
95
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
95 total| Object Name |
|---|
alcatelIND1Dot1XMIBThis module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
The Port Access Entity module for managing 802.1X for
the Birds Of Prey Product Line
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) 1995-2007 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDE MODULE-IDENTITY .1.3.6.1.4.1.6486.801.1.2.1.30.1 |
alaIND1Dot1XMIBObjectsBranch For 802.1X
Subsystem Managed Objects. OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.30.1.1 |
alaDot1xPortTableA table of system level information for each port
supported by the Port Access Entity. An entry appears
in this table for each port of this system.deprecated SEQUENCE OF AlaDot1xPortEntry .1.3.6.1.4.1.6486.801.1.2.1.30.1.1.1 |
alaDot1xPortEntryTP DO: Add description heredeprecated AlaDot1xPortEntry .1.3.6.1.4.1.6486.801.1.2.1.30.1.1.1.1 |
alaDot1xPortSlotNumberThe slot that the logical port represented by the dot1xPaePortNumber resides.rodeprecated INTEGER .1.3.6.1.4.1.6486.801.1.2.1.30.1.1.1.1.1 |
alaDot1xPortPortNumberThe user port that the logical port represented by the dot1xPaePortNumber resides.rodeprecated INTEGER .1.3.6.1.4.1.6486.801.1.2.1.30.1.1.1.1.2 |
alaDot1xPortMACAddressThe MAC address of the supplicant that along with the slot and port uniquely
form the logical port represented by the dot1xPaePortNumber.rodeprecated MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.30.1.1.1.1.3 |
alaDot1xPortVlanThe vlan that the supplicant is authorized to access.rodeprecated INTEGER .1.3.6.1.4.1.6486.801.1.2.1.30.1.1.1.1.4 |
alaDot1xPortProtocolThe protocol that is authorized for the supplicant. This is used in conjunction
with the alaDot1xPortVlan object. Supplicant can be authorized to different vlans
for different protocol.rodeprecated INTEGER .1.3.6.1.4.1.6486.801.1.2.1.30.1.1.1.1.5 |
alaDot1xPortUserNameThe user name of the supplicant used for authentication.rodeprecated DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.30.1.1.1.1.6 |
alaDot1xPortStateThe State of the port.rodeprecated Enumeration .1.3.6.1.4.1.6486.801.1.2.1.30.1.1.1.1.7 |
alaDot1xSupplicantPolicyUsedClassification Policy under which the 802.1x supplicant is learned.rodeprecated ALADot1xClassificationPolicyType .1.3.6.1.4.1.6486.801.1.2.1.30.1.1.1.1.8 |
alaDot1xPortLookupTableA table of which allows to find the logical port number
given the physical slot/port/MAC. An entry appears
in this table for each logical port of this system. SEQUENCE OF AlaDot1xPortLookupEntry .1.3.6.1.4.1.6486.801.1.2.1.30.1.1.2 |
alaDot1xPortLookupEntryThe translation table to look up the dot1xPaePortNumber. AlaDot1xPortLookupEntry .1.3.6.1.4.1.6486.801.1.2.1.30.1.1.2.1 |
alaDot1xPortLookupSlotNumberThe slot that the logical port represented by the dot1xPaePortNumber resides.ro INTEGER .1.3.6.1.4.1.6486.801.1.2.1.30.1.1.2.1.1 |
alaDot1xPortLookupPortNumberThe physical port that the logical port represented by the dot1xPaePortNumber resides.ro INTEGER .1.3.6.1.4.1.6486.801.1.2.1.30.1.1.2.1.2 |
alaDot1xPortLookupMACAddressThe MAC address of the supplicant that along with the slot and port uniquely
form the logical port represented by the dot1xPaePortNumber.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.30.1.1.2.1.3 |
alaDot1xPortLookupInterfaceNumberThe ifIndex that represnets the slot and port where the dot1xPaePortNumber resides.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.6486.801.1.2.1.30.1.1.2.1.4 |
alaDot1xMacTableProvide the list of users currently authenticated into the
switch for bridging purpose. SEQUENCE OF AlaDot1xMacEntry .1.3.6.1.4.1.6486.801.1.2.1.30.1.1.4 |
alaDot1xMacEntryAn entry in the AaaAuthenticatedUserTable. AlaDot1xMacEntry .1.3.6.1.4.1.6486.801.1.2.1.30.1.1.4.1 |
alaDot1xMACAddressThe MAC address of the supplicant that along with the slot and port uniquely
form the logical port represented by the dot1xPaePortNumber. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.30.1.1.4.1.1 |
alaDot1xMacIfIndexInterface index in which alaDot1xMACAddress was learned.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.6486.801.1.2.1.30.1.1.4.1.2 |
alaDot1xMacSlotNumberThe slot in which alaDot1xMACAddress was learned.ro Integer32 .1.3.6.1.4.1.6486.801.1.2.1.30.1.1.4.1.3 |
alaDot1xMacPortNumberThe user port in which alaDot1xMACAddress was learned.ro Integer32 .1.3.6.1.4.1.6486.801.1.2.1.30.1.1.4.1.4 |
alaDot1xMacVlanThe vlan that the supplicant is authorized to access.ro Integer32 .1.3.6.1.4.1.6486.801.1.2.1.30.1.1.4.1.5 |
alaDot1xMacProtocolThe protocol that is authorized for the supplicant. This is used in conjunction
with the alaDot1xMacVlan object. Supplicant can be authorized to different vlans
for different protocol.ro Integer32 .1.3.6.1.4.1.6486.801.1.2.1.30.1.1.4.1.6 |
alaDot1xMacUserNameThe user name of the supplicant used for authentication.ro DisplayString .1.3.6.1.4.1.6486.801.1.2.1.30.1.1.4.1.7 |
alaDot1xMacStateThe State of the port in which the current mac-address was learned.ro Enumeration .1.3.6.1.4.1.6486.801.1.2.1.30.1.1.4.1.8 |
alaDot1xMacSupplicantPolicyUsedClassification Policy under which the 802.1x supplicant is learned.ro ALADot1xClassificationPolicyType .1.3.6.1.4.1.6486.801.1.2.1.30.1.1.4.1.9 |
alaDot1xHicEnabledMACFlag to notify that MAC has been classified based on HIC policyrodeprecated ALADot1xHicFlag .1.3.6.1.4.1.6486.801.1.2.1.30.1.1.4.1.10 |
alaDot1xNonSupplicantTableA table of non 802.1x supplicants learned on 802.1x authenticated ports. SEQUENCE OF AlaDot1xNonSupplicantEntry .1.3.6.1.4.1.6486.801.1.2.1.30.1.1.5 |
alaDot1xNonSupplicantEntryNon 802.1x supplicant information. AlaDot1xNonSupplicantEntry .1.3.6.1.4.1.6486.801.1.2.1.30.1.1.5.1 |
alaDot1xNonSupplicantIntfNumThe ifIndex represneting the slot and port where the non 802.1x supplicant is learned.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.6486.801.1.2.1.30.1.1.5.1.1 |
alaDot1xNonSupplicantMACAddressThe MAC address of the non 802.1x supplicant.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.30.1.1.5.1.2 |
alaDot1xNonSupplicantVlanIDThe Id of the VLAN on which the non 802.1x supplicant is learned.ro INTEGER .1.3.6.1.4.1.6486.801.1.2.1.30.1.1.5.1.3 |
alaDot1xNonSupplicantPolicyUsedClassification policy under which the non 802.1x supplicant is learned.ro ALADot1xClassificationPolicyType .1.3.6.1.4.1.6486.801.1.2.1.30.1.1.5.1.4 |
alaDot1xAuthenticationStatusAuthentication status of the non 802.1x supplicant.ro Enumeration .1.3.6.1.4.1.6486.801.1.2.1.30.1.1.5.1.5 |
alaDot1xNonSupplicantHicEnabledMACFlag to specify whether non supplicant is classified based on HIC.ro ALADot1xHicFlag .1.3.6.1.4.1.6486.801.1.2.1.30.1.1.5.1.6 |
alaDot1xAuthPolicyTableA table of supplicant and non supplicant device classification policies
as they are configured on 802.1x authenticated ports. SEQUENCE OF AlaDot1xAuthPolicyEntry .1.3.6.1.4.1.6486.801.1.2.1.30.1.1.6 |
alaDot1xAuthPolicyEntryDevice classification policies information. AlaDot1xAuthPolicyEntry .1.3.6.1.4.1.6486.801.1.2.1.30.1.1.6.1 |
alaDot1xAuthPolicyIntfNumberThe ifIndex that represnets the slot and port where the device classification
policies are configured. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.6486.801.1.2.1.30.1.1.6.1.1 |
alaDot1xNonSuppPolicyMAC based authentication -> M
Group Mobility -> G
VLAN ID -> <vlan id>
Default VLAN -> D
Block -> B
Fail -> ,
Captive Portal -> C
Examples: MGD,GB. The default value is B (block). If the string size is zero (0), the
default value is used.rw DisplayString .1.3.6.1.4.1.6486.801.1.2.1.30.1.1.6.1.2 |
alaDot1xSuppPolicy802.1x authentication -> X
Group Mobility -> G
VLAN ID -> <vlan id>
Default VLAN -> D
Block -> B
Fail -> ,
Captive Portal -> C
Default value: XGD,B. If the string size is zero (0), the default value is used.rw DisplayString .1.3.6.1.4.1.6486.801.1.2.1.30.1.1.6.1.3 |
alaDot1xPollingCntNumber of retries to poll the end station for EAPoL frame before
classifying the end station with group mobility or guest vlan ID configured.
If the value is set to zero (0), it indicates a special case where the port will
ignore any EAP frame from the client and this will force all devices to the
non-supplicant policy for classification.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.30.1.1.6.1.4 |
alaDot1xCaptivePortalPolicyWeb authentication -> W
Group Mobility -> G
VLAN ID -> <vlan id>
Default VLAN -> D
Block -> B
Fail -> ,
Default value: XGD,B, if string size is zero, the default value is used.rw DisplayString .1.3.6.1.4.1.6486.801.1.2.1.30.1.1.6.1.5 |
alaDot1xCPortalSessionLimitCaptive Portal Session limit is the interval that a Captive Portal user can login.
User is to be logged off after the session limit. If the session limit is set to
zero (0), it means the session is unlimited, user will not be automatically logged off.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.30.1.1.6.1.6 |
alaDot1xCPortalRetryCntNumber of retries for the Captive Portal user to provide the user
credential before the software will classify the user to the failed
policy according the the alaDot1xCaptivePortalPolicy.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.30.1.1.6.1.7 |
alaDot1xSupplicantBypassSupplicant Bypass configuration Status.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.30.1.1.6.1.8 |
alaDot1xSBAllowEAPSupplicant Bypass Allow EAP configuration.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.30.1.1.6.1.9 |
alaDot1xCPortalInactivityLogoutCaptive portal inactivity logout entry.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.30.1.1.6.1.10 |
alaDot1xCportalConfig OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.30.1.1.7 |
alaDot1xCPortalIpAddressThe factory default Captive Portal IP address is 10.123.0.1.
If the 10.123.0.0 subnet is already in use, user can change
the Captive Portal IP address to another 10.x.0.0 subnet.
Only the second octet of the Captive Portal IP address can
be changed.rw IpAddress .1.3.6.1.4.1.6486.801.1.2.1.30.1.1.7.1 |
alaDot1xCPortalProxyURLThe factory default for Captive Portal working with proxy
server url has the key word proxy. If the user's proxy
server url does not have the key work proxy, user can use
this object to specify the proxy server url. If none is specified
this object will return the default value - proxy.rw SnmpAdminString .1.3.6.1.4.1.6486.801.1.2.1.30.1.1.7.2 |
alaDot1xCPortalPostAuthSuccessRedirectURLCaptive Portal's Redirect URL upon successful authentication.rw SnmpAdminString .1.3.6.1.4.1.6486.801.1.2.1.30.1.1.7.3 |
alaDot1xCPortalPostAuthFailRedirectURLCaptive Portal's Redirect URL upon failed authentication.rw SnmpAdminString .1.3.6.1.4.1.6486.801.1.2.1.30.1.1.7.4 |
alaDot1xCPortalDNSKeyword1Captive Portal's DNS keyword string.rw SnmpAdminString .1.3.6.1.4.1.6486.801.1.2.1.30.1.1.7.5 |
alaDot1xCPortalDNSKeyword2Captive Portal's DNS keyword string.rw SnmpAdminString .1.3.6.1.4.1.6486.801.1.2.1.30.1.1.7.6 |
alaDot1xCPortalDNSKeyword3Captive Portal's DNS keyword string.rw SnmpAdminString .1.3.6.1.4.1.6486.801.1.2.1.30.1.1.7.7 |
alaDot1xCPortalDNSKeyword4Captive Portal's DNS keyword string.rw SnmpAdminString .1.3.6.1.4.1.6486.801.1.2.1.30.1.1.7.8 |
alaDot1xCPortalProxyPortCaptive Portal's user defined proxy port number.rw Integer32 (1..65535 ) .1.3.6.1.4.1.6486.801.1.2.1.30.1.1.7.9 |
alaDot1xCPortalRedirectStringCaptive Portal redirect url key string.rw SnmpAdminString .1.3.6.1.4.1.6486.801.1.2.1.30.1.1.7.10 |
alaDot1xDeviceStatusTableA table of system level information for each port
supported by the Port Access Entity. An entry appears
in this table for each port of this system. SEQUENCE OF AlaDot1xDeviceStatusEntry .1.3.6.1.4.1.6486.801.1.2.1.30.1.1.8 |
alaDot1xDeviceStatusEntryOne entry of the Device Status Table. AlaDot1xDeviceStatusEntry .1.3.6.1.4.1.6486.801.1.2.1.30.1.1.8.1 |
alaDot1xDeviceStatusMacQueryTypeThe type of MAC address to query. ALADot1xMacQueryType .1.3.6.1.4.1.6486.801.1.2.1.30.1.1.8.1.1 |
alaDot1xDeviceStatusSlotNumberThe slot that the device reporting the status resides. INTEGER .1.3.6.1.4.1.6486.801.1.2.1.30.1.1.8.1.2 |
alaDot1xDeviceStatusPortNumberThe user port that the device reporting the status resides. INTEGER .1.3.6.1.4.1.6486.801.1.2.1.30.1.1.8.1.3 |
alaDot1xDeviceStatusMACAddressThe MAC address of the device reporting the status. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.30.1.1.8.1.4 |
alaDot1xDeviceStatusDeviceTypeThe type of device. Either supplicant or non-supplicant. ALADot1xDeviceType .1.3.6.1.4.1.6486.801.1.2.1.30.1.1.8.1.5 |
alaDot1xDeviceStatusVlanThe vlan that the device reporting the status is authorized to access.ro INTEGER .1.3.6.1.4.1.6486.801.1.2.1.30.1.1.8.1.6 |
alaDot1xDeviceStatusIPAddressThe IP address of the device reporting the status.ro IpAddress .1.3.6.1.4.1.6486.801.1.2.1.30.1.1.8.1.7 |
alaDot1xDeviceStatusUserNameThe user name of the device reporting the status.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.6486.801.1.2.1.30.1.1.8.1.8 |
alaDot1xDeviceStatusProfileUsedThe name of the User Network Profile entry used when the
device reporting the status is classified.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.6486.801.1.2.1.30.1.1.8.1.9 |
alaDot1xDeviceStatusAuthTypeThe type of authentication used by the device reporting
the status to obtain network access.ro ALADot1xAuthenticationType .1.3.6.1.4.1.6486.801.1.2.1.30.1.1.8.1.10 |
alaDot1xDeviceStatusPolicyUsedClassification Policy under which the device is learned.ro ALADot1xClassificationPolicyType .1.3.6.1.4.1.6486.801.1.2.1.30.1.1.8.1.11 |
alaDot1xDeviceStatusAuthResultThe State of the port.ro ALADot1xAuthenticationResult .1.3.6.1.4.1.6486.801.1.2.1.30.1.1.8.1.12 |
alaDot1xDeviceStatusMacLearntStateThe State of the MAC classified in the switch.ro ALADot1xMacLearntState .1.3.6.1.4.1.6486.801.1.2.1.30.1.1.8.1.13 |
alaDot1xDeviceStatusTimeLearnedThe time that the MAC address is learned in the system.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.30.1.1.8.1.14 |
alaDot1xDeviceStatusCaptivePortalUsedThe object indicates if the device is classified in the system using
Captive Portal. A value of True means that the device has used Captive Portal
to authenticate its credential and a value of False means that the device
has not used Captive Portal to authenticate its credential.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.30.1.1.8.1.15 |
alaDot1xDeviceStatusHicResultThe Hic result of the device reporting the status is authorized to access. Default value is 0, indicates HIC process has not startedro Integer32( 0 .. 9 ) .1.3.6.1.4.1.6486.801.1.2.1.30.1.1.8.1.16 |
alaDot1xAdminLogoutParams OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.30.1.1.9 |
alaDot1xAdminLogoutTypeWhen this variable is set, the switch is to logout the user based on the
logout type. The associated MIB object should be correctly set
based on the logout type. If the corresponding MIB object that contain the
criteria is not set correctly the switch will not be able to perform the
logout operation. After the logout operation is done, the switch will set
the corresponding criteria to back to its default value. Also when the
logout operation is done, the switch is to set this variable back to zero (0).rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.30.1.1.9.1 |
alaDot1xAdminLogoutMacAddressThis value is used only if alaDot1xAdminLogoutType is set to MAC address.
The default value is set to ff:ff:ff:ff:ff:ff. This well know broadcast MAC
address will not be learned by the switch. The switch will reset this to the
default value after the logout operation is performedrw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.30.1.1.9.2 |
alaDot1xAdminLogoutUserNameThis value is used only if alaDot1xAdminLogoutType is set to username.
The default is a NULL string. The switch will reset this to the default value
after the logout operation is performed. User is not allowed to set the value
to NULL.rw SnmpAdminString .1.3.6.1.4.1.6486.801.1.2.1.30.1.1.9.3 |
alaDot1xAdminLogoutNetworkProfileNameThis value is used only if alaDot1xAdminLogoutType is set to networkprofilename.
The default is a NULL string. The switch will reset this to the default value
after the logout operation is performed. User is not allowed to set the value
to NULL.rw SnmpAdminString .1.3.6.1.4.1.6486.801.1.2.1.30.1.1.9.4 |
alaDot1xAdminLogoutInterfaceIdThis value is used only if alaDot1xAdminLogoutType is set to interfaceId.
The default value is zero (0). The switch will reset this to the default value
after the logout operation is performed.rw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.6486.801.1.2.1.30.1.1.9.5 |
alaDot1xAuthServerTimeout OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.30.1.1.10 |
alaDot1xAuthSvrTimeoutPolicyBlock -> B
User Network Profile -> 'user network profile name'
Default value is B.rw DisplayString .1.3.6.1.4.1.6486.801.1.2.1.30.1.1.10.1 |
alaDot1xAuthSvrTimeoutReAuthPeriodThis is the time interval in second that the supplicant is to be
classified according to the Auth Server Down Policy
(alaDot1xAuthServerTimeoutPolicy). When this time is expired,
the supplicant will be prompted to re-authenticate and see if
the Auth Server is back up. The default value is 30 seconds.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.30.1.1.10.2 |
alaDot1xAuthSvrTimeoutStatusThis is object is to enable or disable the use of alaDot1xAuthSvrTimeoutPolicy and
alaDot1xAuthSvrTimeoutReAuthPeriod. Default is disabled.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.30.1.1.10.3 |
alaPassthroughConfig OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.30.1.1.11 |
alaDot1xPassthroughStatusPassthrough of 802.1x packets.
Force the 802.1x packet to flood in the VLAN.rw AlaPassThroughStatus .1.3.6.1.4.1.6486.801.1.2.1.30.1.1.11.1 |
alaAvlanPassthroughStatusPassthrough of AVLAN packets.
Force the AVLAN packet to flood in the VLAN.rw AlaPassThroughStatus .1.3.6.1.4.1.6486.801.1.2.1.30.1.1.11.2 |
alaCportalPassthroughStatusPassthrough of CAPITIVE packets.
Force the AVLAN packet to flood in the VLAN.rw AlaPassThroughStatus .1.3.6.1.4.1.6486.801.1.2.1.30.1.1.11.3 |
alaIND1Dot1XMIBConformanceBranch For 802.1X
Subsystem Conformance Information. OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.30.1.2 |
alaIND1Dot1XMIBGroupsBranch For 802.1X
Subsystem Units Of Conformance. OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.30.1.2.1 |