VOLIUS-OA-MIB
AI MIB Summary
The VOLIUS-OA-MIB enables SNMP-based monitoring and management of Volius optical transport hardware, specifically fiber optical receivers, Erbium-doped fiber amplifiers (EDFAs), optical switches, and CATV optical transmitters. It facilitates the collection of operational metrics such as optical power levels, signal-to-noise ratios, amplifier gain, and device status states for these active optical network elements.
This MIB describes all SNMP-enabled hardware produced by Volius, such as Fiber optical receivers, Erbium-doped fiber amplifiers, Optical switches, CATV optical transmitters.
Main OID:
vlsGlobalModule.1.3.6.1.4.1.34652.1
90
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
90 total| Object Name |
|---|
volius OBJECT IDENTIFIER .1.3.6.1.4.1.34652 |
vlsGlobalModuleThis MIB describes all SNMP-enabled hardware produced by Volius, such as Fiber optical receivers, Erbium-doped fiber amplifiers, Optical switches, CATV optical transmitters. MODULE-IDENTITY .1.3.6.1.4.1.34652.1 |
vlsSystem OBJECT IDENTIFIER .1.3.6.1.4.1.34652.2 |
vlsSystemGeneral OBJECT IDENTIFIER .1.3.6.1.4.1.34652.2.10 |
vlsModelNamero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.34652.2.10.1 |
vlsSerialNumberro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.34652.2.10.2 |
vlsFirmwareVersionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.34652.2.10.3 |
vlsDateAndTimero DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.34652.2.10.4 |
vlsTimeZoneDifference between local time and UTC in minutes.rw Integer32 (-720..780) .1.3.6.1.4.1.34652.2.10.5 |
vlsCaseTemperaturero VlsDeciCelsius .1.3.6.1.4.1.34652.2.10.6 |
vlsSupplyVoltageTable SEQUENCE OF VlsSupplyVoltageEntry .1.3.6.1.4.1.34652.2.10.7 |
vlsSupplyVoltageEntry VlsSupplyVoltageEntry .1.3.6.1.4.1.34652.2.10.7.1 |
vlsSupplyVoltageIndexro Integer32 .1.3.6.1.4.1.34652.2.10.7.1.1 |
vlsSupplyVoltageNominalro VlsMillivolt .1.3.6.1.4.1.34652.2.10.7.1.2 |
vlsSupplyVoltageActualro VlsMillivolt .1.3.6.1.4.1.34652.2.10.7.1.3 |
vlsOperationMinutesroobsolete Integer32 .1.3.6.1.4.1.34652.2.10.8 |
vlsActivePowerSupplyroobsolete Integer32 .1.3.6.1.4.1.34652.2.10.9 |
vlsBootLoaderVersionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.34652.2.10.10 |
vlsFanSpeedro VlsRPM .1.3.6.1.4.1.34652.2.10.11 |
vlsNetworkServices OBJECT IDENTIFIER .1.3.6.1.4.1.34652.2.11 |
vlsNetworkAddress OBJECT IDENTIFIER .1.3.6.1.4.1.34652.2.11.5 |
vlsMacAddressro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.34652.2.11.5.1 |
vlsIpAddressro InetAddressIPv4 (INET-ADDRESS-MIB) .1.3.6.1.4.1.34652.2.11.5.2 |
vlsNetMaskro InetAddressIPv4 (INET-ADDRESS-MIB) .1.3.6.1.4.1.34652.2.11.5.3 |
vlsDefaultGatewayro InetAddressIPv4 (INET-ADDRESS-MIB) .1.3.6.1.4.1.34652.2.11.5.4 |
vlsHttp OBJECT IDENTIFIER .1.3.6.1.4.1.34652.2.11.6 |
vlsHttpPasswordroobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.34652.2.11.6.1 |
vlsHttpPasswordEnabledrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.34652.2.11.6.2 |
vlsHttpPortro Integer32 .1.3.6.1.4.1.34652.2.11.6.3 |
vlsHttpEnabledro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.34652.2.11.6.4 |
vlsSnmp OBJECT IDENTIFIER .1.3.6.1.4.1.34652.2.11.7 |
vlsSnmpPortro Integer32 .1.3.6.1.4.1.34652.2.11.7.1 |
vlsTrapDestTable SEQUENCE OF VlsTrapDestEntry .1.3.6.1.4.1.34652.2.11.7.2 |
vlsTrapDestEntry VlsTrapDestEntry .1.3.6.1.4.1.34652.2.11.7.2.1 |
vlsTrapDestIndexro Integer32 .1.3.6.1.4.1.34652.2.11.7.2.1.1 |
vlsTrapDestAddrrw InetAddressIPv4 (INET-ADDRESS-MIB) .1.3.6.1.4.1.34652.2.11.7.2.1.2 |
vlsTrapDestPortrw Integer32 .1.3.6.1.4.1.34652.2.11.7.2.1.3 |
vlsTrapDestEnablerw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.34652.2.11.7.2.1.4 |
vlsSntp OBJECT IDENTIFIER .1.3.6.1.4.1.34652.2.11.8 |
vlsSntpServerAddrro InetAddressIPv4 (INET-ADDRESS-MIB) .1.3.6.1.4.1.34652.2.11.8.1 |
vlsSntpServerPortro Integer32 .1.3.6.1.4.1.34652.2.11.8.2 |
vlsSntpEnabledrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.34652.2.11.8.3 |
vlsEventLog OBJECT IDENTIFIER .1.3.6.1.4.1.34652.2.13 |
vlsLastEventCodero VlsEvent .1.3.6.1.4.1.34652.2.13.1 |
vlsLastEventIndexro Integer32 .1.3.6.1.4.1.34652.2.13.2 |
vlsEventLogSizeNumber of events stored in the log.ro Integer32 .1.3.6.1.4.1.34652.2.13.3 |
vlsEventLogTable SEQUENCE OF VlsEventLogEntry .1.3.6.1.4.1.34652.2.13.4 |
vlsEventLogEntry VlsEventLogEntry .1.3.6.1.4.1.34652.2.13.4.1 |
vlsEventIndexro Integer32 .1.3.6.1.4.1.34652.2.13.4.1.1 |
vlsEventCodero VlsEvent .1.3.6.1.4.1.34652.2.13.4.1.2 |
vlsEventTimeStampro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.34652.2.13.4.1.3 |
vlsEventDateTimero DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.34652.2.13.4.1.4 |
vlsEventMessagero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.34652.2.13.4.1.5 |
vlsEventTrap NOTIFICATION-TYPE .1.3.6.1.4.1.34652.2.13.8 |
vlsAlarms OBJECT IDENTIFIER .1.3.6.1.4.1.34652.2.14 |
vlsAlarmsActiveMaskThis is a bit mask where all active alarms are combined. Alarms are latching, that is an alarm is still active even when the condition activating the alarm no longer exists.ro Integer32 .1.3.6.1.4.1.34652.2.14.1 |
vlsAlarmsResetMaskYou can write reset mask to reset individual alarms. An alarm will be reset only if the activating condition no longer exists.rw Integer32 .1.3.6.1.4.1.34652.2.14.2 |
vlsAlarmsTable SEQUENCE OF VlsAlarmsEntry .1.3.6.1.4.1.34652.2.14.3 |
vlsAlarmsEntry VlsAlarmsEntry .1.3.6.1.4.1.34652.2.14.3.1 |
vlsAlarmIndexro Integer32 .1.3.6.1.4.1.34652.2.14.3.1.1 |
vlsAlarmStateWhen read, this OID indicates if the alarm is active. When vlsOff is written to this OID, the alarm is reset.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.34652.2.14.3.1.2 |
vlsAlarmMessagero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.34652.2.14.3.1.3 |
vlsEdfa OBJECT IDENTIFIER .1.3.6.1.4.1.34652.3 |
vlsKeyStatero TruthValue (SNMPv2-TC) .1.3.6.1.4.1.34652.3.1 |
vlsEdfaEmissionStaterw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.34652.3.2 |
vlsEdfaModerw VlsEdfaMode .1.3.6.1.4.1.34652.3.3 |
vlsEdfaPowerSettingrw VlsDeciDbm .1.3.6.1.4.1.34652.3.4 |
vlsEdfaPumpCurrentSettingrw VlsPerMille .1.3.6.1.4.1.34652.3.5 |
vlsEdfaGainSettingrwobsolete VlsDeciDb .1.3.6.1.4.1.34652.3.6 |
vlsEdfaInputTable SEQUENCE OF VlsEdfaInputEntry .1.3.6.1.4.1.34652.3.7 |
vlsEdfaInputEntry VlsEdfaInputEntry .1.3.6.1.4.1.34652.3.7.1 |
vlsEdfaInputIndexro Integer32 .1.3.6.1.4.1.34652.3.7.1.1 |
vlsEdfaInputPowerro VlsDeciDbm .1.3.6.1.4.1.34652.3.7.1.2 |
vlsEdfaOutputPowerTotalro VlsDeciDbm .1.3.6.1.4.1.34652.3.8 |
vlsEdfaOutputPowerPerChannelro VlsDeciDbm .1.3.6.1.4.1.34652.3.9 |
vlsEdfaSplitRatiorw VlsDeciDb .1.3.6.1.4.1.34652.3.10 |
vlsEdfaPumpCurrentro VlsPerMille .1.3.6.1.4.1.34652.3.11 |
vlsEdfaGainro VlsDeciDb .1.3.6.1.4.1.34652.3.12 |
vlsEdfaBackReflectionro VlsDeciDbm .1.3.6.1.4.1.34652.3.13 |
vlsEdfaBackReflectionThresholdrwobsolete VlsDeciDbm .1.3.6.1.4.1.34652.3.14 |
vlsEdfaSwitchModerw VlsSwitchMode .1.3.6.1.4.1.34652.3.15 |
vlsEdfaSwitchStatero VlsSwitchState .1.3.6.1.4.1.34652.3.16 |
vlsEdfaPumpTemperaturero VlsDeciCelsius .1.3.6.1.4.1.34652.3.17 |
vlsEdfaLosThresholdrw VlsDeciDbm .1.3.6.1.4.1.34652.3.18 |
vlsEdfaLoqThresholdrw VlsDeciDbm .1.3.6.1.4.1.34652.3.19 |
vlsOpticalSwitch OBJECT IDENTIFIER .1.3.6.1.4.1.34652.4 |
vlsCatvTransmitter OBJECT IDENTIFIER .1.3.6.1.4.1.34652.5 |
vlsOpticalReceiver OBJECT IDENTIFIER .1.3.6.1.4.1.34652.6 |
vlsCabinetMonitor OBJECT IDENTIFIER .1.3.6.1.4.1.34652.7 |
vlsUpsMonitor OBJECT IDENTIFIER .1.3.6.1.4.1.34652.8 |
More MIBs from Volius
Browse all VoliusMIBs →VOLIUS-OT-MIB
The VOLIUS-OT-MIB enables SNMP-based monitoring and management of Volius optical transport hardware, specifically fiber optical receivers, Erbium-doped fiber amplifiers (EDFAs), optical switches, and CATV optical transmitters. It provides access to device-specific operational metrics such as optical power levels, signal-to-noise ratios, amplifier gain settings, and switch port states for fault detection and performance analysis.
98 objects→
VOLIUS-OR-MIB
The VOLIUS-OR-MIB provides SNMP management capabilities for Volius optical transport hardware, including fiber optical receivers, Erbium-doped fiber amplifiers (EDFAs), optical switches, and CATV optical transmitters, enabling the monitoring of optical power levels, signal-to-noise ratios, temperature, and device operational states.
93 objects→
VOLIUS-OS-MIB
The VOLIUS-OS-MIB module enables SNMP-based monitoring and management of Volius optical network hardware, specifically fiber optical receivers, Erbium-doped fiber amplifiers, optical switches, and CATV optical transmitters. It facilitates the retrieval of operational status, performance counters, and alarm states for these passive and active optical components to support network fault detection and capacity planning.
67 objects→