VOLIUS-OR-MIB
AI MIB Summary
The VOLIUS-OR-MIB provides SNMP management capabilities for Volius optical transport hardware, including fiber optical receivers, Erbium-doped fiber amplifiers (EDFAs), optical switches, and CATV optical transmitters, enabling the monitoring of optical power levels, signal-to-noise ratios, temperature, and device operational states.
This MIB describes all SNMP-enabled hardware produced by Volius, such as Fiber optical receivers, Erbium-doped fiber amplifiers, Optical switches, CATV optical transmitters.
Main OID:
vlsGlobalModule.1.3.6.1.4.1.34652.1
83
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
83 total| Object Name |
|---|
volius OBJECT IDENTIFIER .1.3.6.1.4.1.34652 |
vlsGlobalModuleThis MIB describes all SNMP-enabled hardware produced by Volius, such as Fiber optical receivers, Erbium-doped fiber amplifiers, Optical switches, CATV optical transmitters. MODULE-IDENTITY .1.3.6.1.4.1.34652.1 |
vlsSystem OBJECT IDENTIFIER .1.3.6.1.4.1.34652.2 |
vlsSystemGeneral OBJECT IDENTIFIER .1.3.6.1.4.1.34652.2.10 |
vlsModelNameDevice model namero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.34652.2.10.1 |
vlsSerialNumberDevice serial numberro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.34652.2.10.2 |
vlsFirmwareVersionMain firmware version (monitoring PCB)ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.34652.2.10.3 |
vlsDateAndTimeCurrent date and time, only valid when SNTP time syncronization is operationalro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.34652.2.10.4 |
vlsTimeZoneTime zone expressed in minutes relative to UTC, used when reporting date and time, including event logrw Integer32 (-720..780) .1.3.6.1.4.1.34652.2.10.5 |
vlsCaseTemperatureCase temperaturero VlsTenthCelsius .1.3.6.1.4.1.34652.2.10.6 |
vlsSupplyVoltageTable SEQUENCE OF VlsSupplyVoltageEntry .1.3.6.1.4.1.34652.2.10.7 |
vlsSupplyVoltageEntry VlsSupplyVoltageEntry .1.3.6.1.4.1.34652.2.10.7.1 |
vlsSupplyVoltageIndexPower supply input number (1..2)ro Integer32 .1.3.6.1.4.1.34652.2.10.7.1.1 |
vlsSupplyVoltageNominalNominal value of supply voltagero VlsMilliVolt .1.3.6.1.4.1.34652.2.10.7.1.2 |
vlsSupplyVoltageActualActually measured value of supply voltagero VlsMilliVolt .1.3.6.1.4.1.34652.2.10.7.1.3 |
vlsSupplySelectModeMode of operation of power supply selection logicrw VlsPowerSwitchMode .1.3.6.1.4.1.34652.2.10.8 |
vlsSupplySelectedInputCurrently selected power supply (1..2)ro Integer32 .1.3.6.1.4.1.34652.2.10.9 |
vlsBootLoaderVersionVersion of the boot loaderro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.34652.2.10.10 |
vlsRfFwVerroobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.34652.2.10.11 |
vlsOperatingMinutesTotal number of minutes in operationro Integer32 .1.3.6.1.4.1.34652.2.10.12 |
vlsMonPcbRevisionroobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.34652.2.10.14 |
vlsRfPcbRevisionroobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.34652.2.10.15 |
vlsNumOpticalInputsNumber of optical inputs (1 or 2)ro Integer32 .1.3.6.1.4.1.34652.2.10.16 |
vlsNetworkServices OBJECT IDENTIFIER .1.3.6.1.4.1.34652.2.11 |
vlsNetworkAddress OBJECT IDENTIFIER .1.3.6.1.4.1.34652.2.11.5 |
vlsMacAddressDevice MAC addressro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.34652.2.11.5.1 |
vlsIpAddressIP addressrw InetAddressIPv4 (INET-ADDRESS-MIB) .1.3.6.1.4.1.34652.2.11.5.2 |
vlsNetMaskSubnet maskrw InetAddressIPv4 (INET-ADDRESS-MIB) .1.3.6.1.4.1.34652.2.11.5.3 |
vlsDefaultGatewayDefault gatewayrw InetAddressIPv4 (INET-ADDRESS-MIB) .1.3.6.1.4.1.34652.2.11.5.4 |
vlsDhcproobsolete TruthValue (SNMPv2-TC) .1.3.6.1.4.1.34652.2.11.5.5 |
vlsHttp OBJECT IDENTIFIER .1.3.6.1.4.1.34652.2.11.6 |
vlsHttpPasswordroobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.34652.2.11.6.1 |
vlsHttpPasswordEnabledEnable/disable web interface password protectionrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.34652.2.11.6.2 |
vlsHttpPortrodeprecated Integer32 .1.3.6.1.4.1.34652.2.11.6.3 |
vlsHttpEnabledrodeprecated TruthValue (SNMPv2-TC) .1.3.6.1.4.1.34652.2.11.6.4 |
vlsSnmp OBJECT IDENTIFIER .1.3.6.1.4.1.34652.2.11.7 |
vlsSnmpPortrodeprecated Integer32 .1.3.6.1.4.1.34652.2.11.7.1 |
vlsTrapDestTable SEQUENCE OF VlsTrapDestEntry .1.3.6.1.4.1.34652.2.11.7.2 |
vlsTrapDestEntry VlsTrapDestEntry .1.3.6.1.4.1.34652.2.11.7.2.1 |
vlsTrapDestIndexSNMP trap destination index (1..4)ro Integer32 .1.3.6.1.4.1.34652.2.11.7.2.1.1 |
vlsTrapDestAddrSNMP trap destination IP addressrw InetAddressIPv4 (INET-ADDRESS-MIB) .1.3.6.1.4.1.34652.2.11.7.2.1.2 |
vlsTrapDestPortrodeprecated Integer32 .1.3.6.1.4.1.34652.2.11.7.2.1.3 |
vlsTrapDestEnableEnable/disable sending of SNMP traps to this destinationrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.34652.2.11.7.2.1.4 |
vlsSntp OBJECT IDENTIFIER .1.3.6.1.4.1.34652.2.11.8 |
vlsSntpServerAddrIP address of the SNTP serverrw InetAddressIPv4 (INET-ADDRESS-MIB) .1.3.6.1.4.1.34652.2.11.8.1 |
vlsSntpServerPortrodeprecated Integer32 .1.3.6.1.4.1.34652.2.11.8.2 |
vlsSntpEnabledEnable/disable time synchronization with an SNTP serverrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.34652.2.11.8.3 |
vlsEventLog OBJECT IDENTIFIER .1.3.6.1.4.1.34652.2.13 |
vlsLastEventCodeEvent code of the latest recorder eventro VlsEvent .1.3.6.1.4.1.34652.2.13.1 |
vlsLastEventIndexSequence number of the latest recorded eventro Integer32 .1.3.6.1.4.1.34652.2.13.2 |
vlsEventLogSizeThe number of events currently recorded in the logro Integer32 .1.3.6.1.4.1.34652.2.13.3 |
vlsEventLogTable SEQUENCE OF VlsEventLogEntry .1.3.6.1.4.1.34652.2.13.4 |
vlsEventLogEntry VlsEventLogEntry .1.3.6.1.4.1.34652.2.13.4.1 |
vlsEventIndexSequence number of the event in the log entryro Integer32 .1.3.6.1.4.1.34652.2.13.4.1.1 |
vlsEventCodeEvent code of the event in the log entryro VlsEvent .1.3.6.1.4.1.34652.2.13.4.1.2 |
vlsEventTimeStampUp time when the event in the log entry was recordedro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.34652.2.13.4.1.3 |
vlsEventDateTimeDate and time when the event in the log entry was recorded. Only valid when SNTP time syncronization is operational.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.34652.2.13.4.1.4 |
vlsEventMessageMessage string of the event in the log entryro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.34652.2.13.4.1.5 |
vlsEventTrap NOTIFICATION-TYPE .1.3.6.1.4.1.34652.2.13.8 |
vlsEdfa OBJECT IDENTIFIER .1.3.6.1.4.1.34652.3 |
vlsOpticalSwitch OBJECT IDENTIFIER .1.3.6.1.4.1.34652.4 |
vlsCatvTransmitter OBJECT IDENTIFIER .1.3.6.1.4.1.34652.5 |
vlsOpticalReceiver OBJECT IDENTIFIER .1.3.6.1.4.1.34652.6 |
vlsReceiverInputTable SEQUENCE OF VlsReceiverInputEntry .1.3.6.1.4.1.34652.6.1 |
vlsReceiverInputEntry VlsReceiverInputEntry .1.3.6.1.4.1.34652.6.1.1 |
vlsReceiverInputIndexOptical input number (1..2)ro Integer32 .1.3.6.1.4.1.34652.6.1.1.1 |
vlsReceiverInputPowerOptical power at the inputro VlsTenthDb .1.3.6.1.4.1.34652.6.1.1.2 |
vlsReceiverSelectedInputCurrently selected optical inputro Integer32 .1.3.6.1.4.1.34652.6.2 |
vlsReceiverRfOutputPowerro VlsDb .1.3.6.1.4.1.34652.6.3 |
vlsReceiverSwitchModeMode of operation of optical input selection logicro VlsInputSwitchMode .1.3.6.1.4.1.34652.6.4 |
vlsReceiverInputLowThresholdThe low threshold of optical input power for optical input selection logicrw VlsTenthDb .1.3.6.1.4.1.34652.6.5 |
vlsReceiverInputHighThresholdThe high threshold of optical input power for optical input selection logicrw VlsTenthDb .1.3.6.1.4.1.34652.6.6 |
vlsReceiverManualGainGain setting when AGC is offrw VlsTenthDb (-150..150) .1.3.6.1.4.1.34652.6.7 |
vlsReceiverAgcOffsetGain offset when AGC is onrw VlsTenthDb (-150..150) .1.3.6.1.4.1.34652.6.9 |
vlsReceiverAgcStateEnable/disable AGC (automatic gain control)rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.34652.6.10 |
vlsReceiverCurrentGainCurrent gain of the optical receiver. This is adjusted automatically when AGC is on, or is fixed at vlsRecieverManualGain when AGC is off.ro VlsTenthDb (-150..150) .1.3.6.1.4.1.34652.6.11 |
vlsReceiverEqualizerOutput spectrum tilt adjustmentrw VlsTenthDb .1.3.6.1.4.1.34652.6.12 |
vlsReceiverSpectrumTable SEQUENCE OF VlsReceiverSpectrumEntry .1.3.6.1.4.1.34652.6.15 |
vlsReceiverSpectrumEntry VlsReceiverSpectrumEntry .1.3.6.1.4.1.34652.6.15.1 |
vlsReceiverSpectrumIndexro Integer32 .1.3.6.1.4.1.34652.6.15.1.1 |
vlsCenterFrequencyro VlsKiloHertz .1.3.6.1.4.1.34652.6.15.1.2 |
vlsChannelTypero VlsTvChannelType .1.3.6.1.4.1.34652.6.15.1.3 |
vlsChannelLevelro VlsTenthDb .1.3.6.1.4.1.34652.6.15.1.4 |
More MIBs from Volius
Browse all VoliusMIBs →VOLIUS-OA-MIB
The VOLIUS-OA-MIB enables SNMP-based monitoring and management of Volius optical transport hardware, specifically fiber optical receivers, Erbium-doped fiber amplifiers (EDFAs), optical switches, and CATV optical transmitters. It facilitates the collection of operational metrics such as optical power levels, signal-to-noise ratios, amplifier gain, and device status states for these active optical network elements.
100 objects→
VOLIUS-OT-MIB
The VOLIUS-OT-MIB enables SNMP-based monitoring and management of Volius optical transport hardware, specifically fiber optical receivers, Erbium-doped fiber amplifiers (EDFAs), optical switches, and CATV optical transmitters. It provides access to device-specific operational metrics such as optical power levels, signal-to-noise ratios, amplifier gain settings, and switch port states for fault detection and performance analysis.
98 objects→
VOLIUS-OS-MIB
The VOLIUS-OS-MIB module enables SNMP-based monitoring and management of Volius optical network hardware, specifically fiber optical receivers, Erbium-doped fiber amplifiers, optical switches, and CATV optical transmitters. It facilitates the retrieval of operational status, performance counters, and alarm states for these passive and active optical components to support network fault detection and capacity planning.
67 objects→