SWCOMMGMT-MIB
AI MIB Summary
SWCOMMGMT-MIB provides proprietary SNMP management extensions for Cisco enterprise devices, specifically defining objects to monitor and control common system communication parameters such as interface status, system uptime, and basic device configuration states.
The Structure of Common Management Information for the proprietary enterprise.
Main OID:
swComMgmtMIB.1.3.6.1.4.1.2272.1.201.1.1
93
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
93 total| Object Name |
|---|
swComMgmtMIBThe Structure of Common Management Information for the
proprietary enterprise. MODULE-IDENTITY .1.3.6.1.4.1.2272.1.201.1.1 |
primaryPowerOnThe trap is sent whenever the primary power is turn on. TRAP-TYPE .1.3.6.1.4.1.2272.1.201.1.1.0.1 |
primaryPowerOffThe trap is sent whenever the primary power is turn off. TRAP-TYPE .1.3.6.1.4.1.2272.1.201.1.1.0.2 |
redundantPowerOnThe trap is sent whenever the redundant power is turn on. TRAP-TYPE .1.3.6.1.4.1.2272.1.201.1.1.0.3 |
redundantPowerOffThe trap is sent whenever the redundant power is turn off. TRAP-TYPE .1.3.6.1.4.1.2272.1.201.1.1.0.4 |
agentConfigInfo OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.201.1.1.1 |
agentBasicInfo OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.201.1.1.1.1 |
agentRuntimeSwVersionThis is a textual description of the runtime software version
and revision. If the version number is one and revision number
is zero agentRuntimeSwVersion would be 'Ver. 1.0'ro DisplayString .1.3.6.1.4.1.2272.1.201.1.1.1.1.1 |
agentPromFwVersionThis is a textual description of the agent PROM firmware
version and revision. If the version number is one and revision
number is zero agentPromFwVersion would be 'Ver. 1.0'ro DisplayString .1.3.6.1.4.1.2272.1.201.1.1.1.1.2 |
agentHwRevisionThis is a textual description of the hardware version and
revision. If the version number is one and revision number is
zero agentHwRevision would be 'Ver. 1.0'ro DisplayString .1.3.6.1.4.1.2272.1.201.1.1.1.1.3 |
agentDeviceSerialNumberThe serial number of the device.ro DisplayString .1.3.6.1.4.1.2272.1.201.1.1.1.1.5 |
agentMgmtProtocolCapabilityThe network management protocol(s) supported by this agent.ro Enumeration .1.3.6.1.4.1.2272.1.201.1.1.1.1.6 |
agentMibCapabilityTableA list of MIB capability entries supported by this agent. SEQUENCE OF AgentMibCapabilityEntry .1.3.6.1.4.1.2272.1.201.1.1.1.1.7 |
agentMibCapabilityEntryA MIB capability entry contains objects describing a particular
MIB supported by this agent. AgentMibCapabilityEntry .1.3.6.1.4.1.2272.1.201.1.1.1.1.7.1 |
agentMibCapabilityIndexA list of agentMibCapabilityDescr entries.ro INTEGER .1.3.6.1.4.1.2272.1.201.1.1.1.1.7.1.1 |
agentMibCapabilityDescrThe name of the MIB supported by the agent.ro DisplayString .1.3.6.1.4.1.2272.1.201.1.1.1.1.7.1.2 |
agentMibCapabilityVersionThe version of the MIB specified in this entry.ro INTEGER .1.3.6.1.4.1.2272.1.201.1.1.1.1.7.1.3 |
agentMibCapabilityTypeThe type of the MIB specified in this entry.ro Enumeration .1.3.6.1.4.1.2272.1.201.1.1.1.1.7.1.4 |
agentStatusConsoleInUseThis indicates whether console is currently in-use.ro Enumeration .1.3.6.1.4.1.2272.1.201.1.1.1.1.8 |
agentSerialPortDataBitsThe number of data bits, per byte of data, this port should
send/receive.ro INTEGER .1.3.6.1.4.1.2272.1.201.1.1.1.1.9 |
agentSerialPortParityBitsThe Parity for console mode, If the agentRs232PortConfig change
to console mode then the device will use this group to make a
setup for console value.ro Enumeration .1.3.6.1.4.1.2272.1.201.1.1.1.1.10 |
agentSerialPortStopBitsThe Stop Bits for console mode.ro INTEGER .1.3.6.1.4.1.2272.1.201.1.1.1.1.11 |
agentPrimaryPowerStateThe primary power status.ro Enumeration .1.3.6.1.4.1.2272.1.201.1.1.1.1.12 |
agentRedundantPowerStateThe redundant power status.ro Enumeration .1.3.6.1.4.1.2272.1.201.1.1.1.1.13 |
agentBasicConfig OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.201.1.1.1.2 |
agentFirmwareFileThe name of the firmware file to be downloaded.rw DisplayString .1.3.6.1.4.1.2272.1.201.1.1.1.2.1 |
agentFirmwareSourceAddrThe ip address where new firmware file is located on.rw IpAddress .1.3.6.1.4.1.2272.1.201.1.1.1.2.2 |
agentFirmwareUpdateCtrlwhile this object is set to 'activate', FTP download is working
immediately, and agentFirmwareUpdateState is changed to 'in-process'.
The agent always returns 'other' while it is read.rw Enumeration .1.3.6.1.4.1.2272.1.201.1.1.1.2.3 |
agentFirmwareUpdateStatestatus of firmware download control. If the value is 'other',
means never firmware updated since device started up.ro Enumeration .1.3.6.1.4.1.2272.1.201.1.1.1.2.4 |
agentSystemRestartThis object indicates the agent system restart state. Setting
this object to no-restart(3) has no effect. Setting this object to
cold-start(2) will restart the agent. The agent always returns
no-restart(3) when this object is read.rw Enumeration .1.3.6.1.4.1.2272.1.201.1.1.1.2.5 |
agentRs232PortConfigThis object indicates the RS-232 mode while device restart.rw Enumeration .1.3.6.1.4.1.2272.1.201.1.1.1.2.6 |
agentBaudRateConfigThis object indicates the baud rate while device restart.rw Enumeration .1.3.6.1.4.1.2272.1.201.1.1.1.2.7 |
agentAutoLogoutConfigThis object indicates the time which the console will log out
the current user if there is no user input.rw Enumeration .1.3.6.1.4.1.2272.1.201.1.1.1.2.8 |
agentTelnetStateThis object decide the TELNET enabled or disabled.rw Enumeration .1.3.6.1.4.1.2272.1.201.1.1.1.2.9 |
agentWebStateThis object decide the WEB enabled or disabled.rw Enumeration .1.3.6.1.4.1.2272.1.201.1.1.1.2.10 |
agentFactoryResetThis object indicates the agent system reset state. Setting
this object to no-reset(5) has no effect. Setting this object to
reset(2) will reset the agent to default settings except IP
address, user account and history log. Setting this object to
config(3) will reset the agent to default settings. Setting this
object to system(4) will reset the agent to default settings.
Then the switch will do factory reset, save and reboot. The
agent always returns no-reset(5) when this object is read.rw Enumeration .1.3.6.1.4.1.2272.1.201.1.1.1.2.11 |
agentIpProtoConfig OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.201.1.1.1.3 |
agentIpNumOfIfThe total number of IP interfaces supported by this agent.ro INTEGER .1.3.6.1.4.1.2272.1.201.1.1.1.3.1 |
agentIpIfTableA list of IP interface entries supported by the agent. SEQUENCE OF AgentIpIfEntry .1.3.6.1.4.1.2272.1.201.1.1.1.3.2 |
agentIpIfEntryAn agentIPIfEntry contains information about a particular IP
interface. AgentIpIfEntry .1.3.6.1.4.1.2272.1.201.1.1.1.3.2.1 |
agentIpIfIndexThis object uniquely identifies the IP interface number in the
agentIpIfTable. This value should never greater than
agentIpNumOfIf.ro INTEGER .1.3.6.1.4.1.2272.1.201.1.1.1.3.2.1.1 |
agentIpIfAddressThe IP address of the interface.ro IpAddress .1.3.6.1.4.1.2272.1.201.1.1.1.3.2.1.2 |
agentIpIfNetMaskThe IP net mask for this interface.ro IpAddress .1.3.6.1.4.1.2272.1.201.1.1.1.3.2.1.3 |
agentIpIfDefaultRouterThe default gateway for this IP interface.ro IpAddress .1.3.6.1.4.1.2272.1.201.1.1.1.3.2.1.4 |
agentIpIfMacAddrThe MAC address of this IP interface. For interfaces which do
not have such an address. (e.g., a serial line), this object
should contain an octet string of zero length.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.2272.1.201.1.1.1.3.2.1.5 |
agentIpIfTypeThe physical layer interface of the IP interface.ro Enumeration .1.3.6.1.4.1.2272.1.201.1.1.1.3.2.1.6 |
agentIpBootServerAddrThe IP Address of Boot Server.ro IpAddress .1.3.6.1.4.1.2272.1.201.1.1.1.3.3 |
agentIpGetIpFromBootpServerThis object indicates whether the agent get its system IP
address from Bootp/DHCP server at start up.rw Enumeration .1.3.6.1.4.1.2272.1.201.1.1.1.3.4 |
agentIpSystemIpAddrThe system IP address.rw IpAddress .1.3.6.1.4.1.2272.1.201.1.1.1.3.5 |
agentIpSystemSubnetMaskThe system subnet mask.rw IpAddress .1.3.6.1.4.1.2272.1.201.1.1.1.3.6 |
agentIpDefaultGatewayThe system default gateway.rw IpAddress .1.3.6.1.4.1.2272.1.201.1.1.1.3.7 |
agentCommunityTableA list of SNMP community string. SEQUENCE OF AgentCommunityEntry .1.3.6.1.4.1.2272.1.201.1.1.1.4 |
agentCommunityEntryAn agentCommunityEntry contains information about SNMP community
string and access level. AgentCommunityEntry .1.3.6.1.4.1.2272.1.201.1.1.1.4.1 |
agentCommunityStringWhen an SNMP message is received by this entity, the community
string in the message is compared with this string first. If it
doesn't match, the user can't access this entity by manage tool.ro DisplayString .1.3.6.1.4.1.2272.1.201.1.1.1.4.1.1 |
agentCommunityLevelThe access level of SNMP. The value read-only(2) indicates the
user only can view the information about this device, but can't
modify it. The value read-write(3) is granted to all items in
the MIB.rw Enumeration .1.3.6.1.4.1.2272.1.201.1.1.1.4.1.2 |
agentCommunitystateThis object indicates the status of this entry.
other(1) - this entry is currently in use but the conditions
under which it will remain so are different from each of
the following values.
invalid(2) - writing this value to the object, and then the
corresponding entry will be removed from the table.
valid(3) - this entry is reside in the table.rw Enumeration .1.3.6.1.4.1.2272.1.201.1.1.1.4.1.3 |
agentTrustHostTableA list of managemnet station IP addresses. SEQUENCE OF AgentTrustHostEntry .1.3.6.1.4.1.2272.1.201.1.1.1.5 |
agentTrustHostEntryAn agentTrustHostEntry contains information about managemnet
station IP addresses and port. AgentTrustHostEntry .1.3.6.1.4.1.2272.1.201.1.1.1.5.1 |
agentTrustHostIdThis object uniquely identifies the management station in the
agentTrustHostTable.ro INTEGER .1.3.6.1.4.1.2272.1.201.1.1.1.5.1.1 |
agentTrustHostIPAddrThe IP address of the managemet station.rw IpAddress .1.3.6.1.4.1.2272.1.201.1.1.1.5.1.2 |
agentTrustHostStateThis object indicates the status of this entry.
other(1) - this entry is currently in use but the conditions
under which it will remain so are different from each of
the following values.
invalid(2) - writing this value to the object, and then the
corresponding entry will be removed from the table.
valid(3) - this entry is reside in the table.rw Enumeration .1.3.6.1.4.1.2272.1.201.1.1.1.5.1.3 |
agentTrustHostIPMaskThe IP subnet mask of the managemet station.rw IpAddress .1.3.6.1.4.1.2272.1.201.1.1.1.5.1.4 |
agentLogConfig OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.201.1.1.1.6 |
agentLogUploadLogFileNameThe name of the log file to be uploaded from the device to TFTP
server when enabling log upload function (by writing
agentLogUploadLog).rw DisplayString .1.3.6.1.4.1.2272.1.201.1.1.1.6.1 |
agentLogUploadLogSourceAddrThe ip address where been uploaded log file.rw IpAddress .1.3.6.1.4.1.2272.1.201.1.1.1.6.2 |
agentLogUploadLogAs the object is set to active, it will immediately invoke log
upload function. If set to normal, do nothing.rw Enumeration .1.3.6.1.4.1.2272.1.201.1.1.1.6.3 |
agentLogUploadLogStatestatus of upload log control. If the value is 'other',
means never log updated since device started up.ro Enumeration .1.3.6.1.4.1.2272.1.201.1.1.1.6.4 |
agentLogClearLogAs the object is set to active, the log table will be clear.
If set to normal, do nothing.rw Enumeration .1.3.6.1.4.1.2272.1.201.1.1.1.6.5 |
agentTblSize OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.201.1.1.1.7 |
agentArpNumberThe number of current ipNetToMediaTable entries that are not
invalid.ro INTEGER .1.3.6.1.4.1.2272.1.201.1.1.1.7.1 |
agentIpNumberThe number of current IP interface on this device.ro INTEGER .1.3.6.1.4.1.2272.1.201.1.1.1.7.2 |
agentStaticVlanNumberThe number of static VLAN on this device.ro INTEGER .1.3.6.1.4.1.2272.1.201.1.1.1.7.3 |
agentRTC OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.201.1.1.1.8 |
agentRTCYearThe number of the year.rw INTEGER .1.3.6.1.4.1.2272.1.201.1.1.1.8.1 |
agentRTCMonthThe number of the month.rw INTEGER .1.3.6.1.4.1.2272.1.201.1.1.1.8.2 |
agentRTCDateThe number of the date.rw INTEGER .1.3.6.1.4.1.2272.1.201.1.1.1.8.3 |
agentRTCHourThe number of the hour.rw INTEGER .1.3.6.1.4.1.2272.1.201.1.1.1.8.4 |
agentRTCMinuteThe number of the hour.rw INTEGER .1.3.6.1.4.1.2272.1.201.1.1.1.8.5 |
agentRTCSecondThe number of the second.rw INTEGER .1.3.6.1.4.1.2272.1.201.1.1.1.8.6 |
agentRTCWeekDayThe current week day.ro Enumeration .1.3.6.1.4.1.2272.1.201.1.1.1.8.7 |
agentMIBTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.201.1.1.1.9 |
agentSyslog OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.201.1.1.1.10 |
agentSyslogStateThis object decide the Syslog sending message enabled or
disabled.rw Enumeration .1.3.6.1.4.1.2272.1.201.1.1.1.10.1 |
agentSyslogMaxHostSupportThe maximum number of syslog servers supported.rw INTEGER .1.3.6.1.4.1.2272.1.201.1.1.1.10.2 |
agentSyslogHostTableThis table specifys syslog server configurations. SEQUENCE OF AgentSyslogHostEntry .1.3.6.1.4.1.2272.1.201.1.1.1.10.3 |
agentSyslogHostEntryA list of information specifies syslog server configurations. AgentSyslogHostEntry .1.3.6.1.4.1.2272.1.201.1.1.1.10.3.1 |
agentSyslogHostIdThe index of syslog host.ro INTEGER .1.3.6.1.4.1.2272.1.201.1.1.1.10.3.1.1 |
agentSyslogHostIpThe IP address of the host.rw IpAddress .1.3.6.1.4.1.2272.1.201.1.1.1.10.3.1.2 |
agentSyslogHostSeverityThe object indicates the severity level indicator.The device
support four severity levels in SYSLOG protocol. The fatal(3)
mapping to emergency and critical level.rw Bits .1.3.6.1.4.1.2272.1.201.1.1.1.10.3.1.3 |
agentSyslogHostFacilitySome of the operating system daemons and processes have been
assigned Facility values. Processes and daemons that have not
been explicitly assigned a Facility may use any of the
local use facilities or they may use the user-level Facility.rw Enumeration .1.3.6.1.4.1.2272.1.201.1.1.1.10.3.1.4 |
agentSyslogHostUDPPortThe object indicates UDP port number.rw INTEGER .1.3.6.1.4.1.2272.1.201.1.1.1.10.3.1.5 |
agentSyslogHostStateThis object indicates the status of this entry.
other(1) - this entry is currently in use but the conditions
under which it will remain so are different from each of
the following values.
disabled(2) - the syslog host disabled.
enabled(3) - the syslog host enabled.
invalid(4) - writing this value to the object, and then the
corresponding entry will be removed from the table.rw Enumeration .1.3.6.1.4.1.2272.1.201.1.1.1.10.3.1.6 |
agentRemoteUserLogStateThis object decide the remote user log message will be shown
on screen or not.rw Enumeration .1.3.6.1.4.1.2272.1.201.1.1.1.10.4 |