CADANT-CMTS-PACKETCABLE-MIB
AI MIB Summary
The CADANT-CADANT-CMTS-PACKETCABLE-MIB provides general-purpose SNMP management for PacketCable-compliant Cable Modem Termination Systems (CMTS), monitoring non-specialized PacketCable protocol states and operational parameters not covered by more granular MIB modules.
PacketCable general-purpose management MIB. This MIB contains objects which are specific to PacketCable but not covered in any of the more-specialized MIBS.
Main OID:
cadPCMIB.1.3.6.1.4.1.4998.1.1.115
99
Objects
Active
Status
8
Dependencies
Imported Objects
Objects
99 total| Object Name |
|---|
cadPCMIBPacketCable general-purpose management MIB. This MIB
contains objects which are specific to PacketCable but
not covered in any of the more-specialized MIBS. MODULE-IDENTITY .1.3.6.1.4.1.4998.1.1.115 |
cadPCMibObjects OBJECT IDENTIFIER .1.3.6.1.4.1.4998.1.1.115.1 |
cadPCMibBase OBJECT IDENTIFIER .1.3.6.1.4.1.4998.1.1.115.1.1 |
cadPCPreemptionAllowedIndicates whether the system will preempt another
session for an emergency call.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.115.1.1.3 |
cadPCUpNormAllowedUsageMaximum percentage of upstream resources that may be used by
non-emergency telephony services. This is also the maximum
amount of resources non-exclusively allocated to sessions of
this typerw INTEGER .1.3.6.1.4.1.4998.1.1.115.1.1.4 |
cadPCUpNormResUsageMinimum percentage of upstream resources that may be used by
non-emergency telephony services. This is also the maximum amount
of resources exclusively allocated to sessions of this type. If
the value of this object is non-zero, then a portion of the upstream
bandwidth will be set aside for normal telephony use only - reducing
the bandwidth that is available for normal data.rw INTEGER .1.3.6.1.4.1.4998.1.1.115.1.1.5 |
cadPCUpEmerAllowedUsageMaximum percentage of upstream resources that may be used by
emergency telephony services.rw INTEGER .1.3.6.1.4.1.4998.1.1.115.1.1.6 |
cadPCUpEmerResUsageMinimum percentage of upstream resources that may be used by
emergency telephony services. If the value of this object is
non-zero, then a portion of the upstream bandwidth will be set
aside for emercency telephony use only - reducing the bandwidth
that is available for normal data.rw INTEGER .1.3.6.1.4.1.4998.1.1.115.1.1.7 |
cadPCDownNormAllowedUsageMaximum percentage of downstream resources that may be used by
non-emergency telephony services. This is also the maximum
amount of resources non-exclusively allocated to sessions of
this typerw INTEGER .1.3.6.1.4.1.4998.1.1.115.1.1.8 |
cadPCDownNormResUsageMinimum percentage of downstream resources that may be used by
non-emergency telephony services. This is also the maximum amount
of resources exclusively allocated to sessions of this type. If
the value of this object is non-zero, then a portion of the upstream
bandwidth will be set aside for normal telephony use only - reducing
the bandwidth that is available for normal data.rw INTEGER .1.3.6.1.4.1.4998.1.1.115.1.1.9 |
cadPCDownEmerAllowedUsageMaximum percentage of downstream resources that may be used by
emergency telephony services.rw INTEGER .1.3.6.1.4.1.4998.1.1.115.1.1.10 |
cadPCDownEmerResUsageMinimum percentage of downstream resources that may be used by
emergency telephony services. If the value of this object is non-zero,
then a portion of the upstream bandwidth will be set aside for normal
telephony use only - reducing the bandwidth that is available for
normal data.rw INTEGER .1.3.6.1.4.1.4998.1.1.115.1.1.11 |
cadPCCAMTableTable of Per-CAM PacketCable Data for 2D12U only SEQUENCE OF CadPCCAMEntry .1.3.6.1.4.1.4998.1.1.115.1.1.12 |
cadPCCAMEntryThis entry contains all of the PacketCable data that
is to be managed on a per-CAM basis. CadPCCAMEntry .1.3.6.1.4.1.4998.1.1.115.1.1.12.1 |
cadFreeDSxAllowedIndicates whether the authorization module will allow a
DOCSIS MAC Messaging Dynamic Services request (DSx) without
a gate-ID in an authorization block.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.115.1.1.12.1.1 |
cadPCMaxOverloadDSaCallsthe max number of connections we will allow per 10 second interval
when the system cpu is in a normal condition, i.e. no overload.rw Unsigned32 .1.3.6.1.4.1.4998.1.1.115.1.1.12.1.2 |
cadPCMaxYellowOverloadDSaCallsthe max number of connections we will allow per 10 second interval
when the system cpu is in a yellow overload condition.rw Unsigned32 .1.3.6.1.4.1.4998.1.1.115.1.1.12.1.3 |
cadPCMaxRedOverloadDSaCallsthe max number of connections we will allow per 10 second interval
when the system cpu is in a red overload condition.rw Unsigned32 .1.3.6.1.4.1.4998.1.1.115.1.1.12.1.4 |
cadPCCardIdThe unique id of this card within the shelf. CardId (CADANT-TC) .1.3.6.1.4.1.4998.1.1.115.1.1.12.1.5 |
cadPCAdminStateThe administrative state of PacketCable services on the CMTS.rw AdminState (CADANT-TC) .1.3.6.1.4.1.4998.1.1.115.1.1.13 |
cadPCMaxOverloadCallsthe max number of connections we will allow per 10 second interval
when the system cpu is in a normal condition, i.e. no overload.rwobsolete Unsigned32 .1.3.6.1.4.1.4998.1.1.115.1.1.14 |
cadPCMaxYellowOverloadCallsthe max number of connections we will allow per 10 second interval
when the system cpu is in a yellow overload condition.rwobsolete Unsigned32 .1.3.6.1.4.1.4998.1.1.115.1.1.15 |
cadPCMaxRedOverloadCallsthe max number of connections we will allow per 10 second interval
when the system cpu is in a red overload condition.rwobsolete Unsigned32 .1.3.6.1.4.1.4998.1.1.115.1.1.16 |
cadPCDownTotalAllowedUsageMaximum percentage of downstream resources that may be
used by both normal and emergency telephony services.rw INTEGER .1.3.6.1.4.1.4998.1.1.115.1.1.17 |
cadPCUpTotalAllowedUsageMaximum percentage of upstream resources that may be
used by both normal and emergency telephony services.rw INTEGER .1.3.6.1.4.1.4998.1.1.115.1.1.18 |
cadPCMaxOverloadGateMsgsthe max number of gate messages that the system will process per 10
second interval when the system cpu is in a normal condition, i.e.
no overload.rw Unsigned32 .1.3.6.1.4.1.4998.1.1.115.1.1.19 |
cadPCMaxYellowOverloadGateMsgsthe max number of gate messages that the system will process per 10
second interval when the system cpu is in a yellow overload condition.rw Unsigned32 .1.3.6.1.4.1.4998.1.1.115.1.1.20 |
cadPCMaxRedOverloadGateMsgsthe max number of gate messages that the system will process per 10
second interval when the system cpu is in a red overload condition.rw Unsigned32 .1.3.6.1.4.1.4998.1.1.115.1.1.21 |
cadPCClearGateCountsset to true to clear the gate counts, always false when readrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.115.1.1.25 |
cadPCClearAnomalyCountsset to true to clear the anomaly counts, always false when readrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.115.1.1.26 |
cadPCClearConnRateOverloadCountsset to true to clear the connection rate overload counts, always false when readrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.115.1.1.27 |
cadPCClearEvMsgCountsset to true to clear the event messaging counts, always false when readrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.115.1.1.28 |
cadPCClearCopsCountsset to true to clear the COPS counts, always false when readrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.115.1.1.29 |
cadPCClearGateCtlCountsset to true to clear the gate control counts, always false when readrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.115.1.1.30 |
cadPCMibGateCounts OBJECT IDENTIFIER .1.3.6.1.4.1.4998.1.1.115.1.1.40 |
cadPCTotalGateCountTotal number of gates that have been created since the last reboot
of the system or since the last time that this counter was manually
reset.ro Counter32 UNITS "gates" .1.3.6.1.4.1.4998.1.1.115.1.1.40.1 |
cadPCGateAllocatedStateCountTotal number of gates that are currently in the ALLOCATED statero Counter32 UNITS "gates" .1.3.6.1.4.1.4998.1.1.115.1.1.40.2 |
cadPCGateAuthorizedStateCountTotal number of gates that are currently in the AUTHORIZED statero Counter32 UNITS "gates" .1.3.6.1.4.1.4998.1.1.115.1.1.40.3 |
cadPCGateReservedStateCountTotal number of gates that are currently in the RESERVED statero Counter32 UNITS "gates" .1.3.6.1.4.1.4998.1.1.115.1.1.40.4 |
cadPCGateCommittedStateCountTotal number of gates that are currently in the COMMITTED statero Counter32 UNITS "gates" .1.3.6.1.4.1.4998.1.1.115.1.1.40.5 |
cadPCGateLastClearedThe value of sysUptime when the gate counts were last cleared.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.115.1.1.40.6 |
cadPCAnomalyCountTableTable of anomaly counts SEQUENCE OF CadPCAnomalyCountEntry .1.3.6.1.4.1.4998.1.1.115.1.1.45 |
cadPCAnomalyCountEntryEntry of anomaly counts CadPCAnomalyCountEntry .1.3.6.1.4.1.4998.1.1.115.1.1.45.1 |
cadPCAnomalyCodePacketCable anomaly code CadPCAnomalyCode .1.3.6.1.4.1.4998.1.1.115.1.1.45.1.1 |
cadPCAnomalyCountCount of anomalies of the corresponding type that have occurred
since boot or since the last manual reset of this count.ro Counter32 .1.3.6.1.4.1.4998.1.1.115.1.1.45.1.2 |
cadPCAnomalyLastClearedThe value of sysUptime when the anomaly counts were last cleared.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.115.1.1.46 |
cadPCSendSubIdIndicates whether the C4 will send a subscriber ID in every DQoS gate-open
and gate-close message. This is provisioned per-CMTS. ECN DQOS1.5-N-06.0339-4rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.115.1.1.47 |
cadPCConnRateReqHistoryTableTable of connection request rate history SEQUENCE OF CadPCConnRateReqHistoryEntry .1.3.6.1.4.1.4998.1.1.115.1.1.50 |
cadPCConnRateReqHistoryEntryEntry of connection request rate CadPCConnRateReqHistoryEntry .1.3.6.1.4.1.4998.1.1.115.1.1.50.1 |
cadPCConnRateReqHistoryTimeStampValue of sysUpTime (rounded down to the nearest second) when
this entry was created TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.115.1.1.50.1.1 |
cadPCConnRateReqHistoryCountCount of connection requests (gates) made during the secondro Counter32 .1.3.6.1.4.1.4998.1.1.115.1.1.50.1.2 |
cadPCConnReqMaxHistRateMaximum value of any cadPCConnReqRateCount since system boot or
reset of this value.ro Counter32 UNITS "gates" .1.3.6.1.4.1.4998.1.1.115.1.1.51 |
cadPCConnRateOverloadRejTableTable of Per-card rate overload reject connection counts SEQUENCE OF CadPCConnRateOverloadRejEntry .1.3.6.1.4.1.4998.1.1.115.1.1.55 |
cadPCConnRateOverloadRejEntryThis entry contains the connection rate overload rejection counts. CadPCConnRateOverloadRejEntry .1.3.6.1.4.1.4998.1.1.115.1.1.55.1 |
cadPCConnRateOverloadRejCountNumber of connections that have been rejected as a result of rate
overload protection while the system is in the corresponding
system-wide overload state since the last system reboot or since
the last time that this counter was reset.ro Counter32 UNITS "connections" .1.3.6.1.4.1.4998.1.1.115.1.1.55.1.1 |
cadPCConnRateOverloadRejCardIdThe unique id of this card within the shelf. CardId (CADANT-TC) .1.3.6.1.4.1.4998.1.1.115.1.1.55.1.2 |
cadPCConnRateOverloadLastClearedThe value of sysUptime when the connection rate overload counts were last cleared.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.115.1.1.56 |
cadPCEvMsgCountTableTable of counts of event messages that have been
transmitted to each RKS or DF (for Electronic Surveillance
Call Data) server SEQUENCE OF CadPCEvMsgCountEntry .1.3.6.1.4.1.4998.1.1.115.1.1.60 |
cadPCEvMsgCountEntryThis entry contains counts of event messages that have been
transmitted CadPCEvMsgCountEntry .1.3.6.1.4.1.4998.1.1.115.1.1.60.1 |
cadPCEvMsgCountServerIP address of RKS or DF server IpAddress .1.3.6.1.4.1.4998.1.1.115.1.1.60.1.1 |
cadPCEvMsgServerIsDFIndicator of type of server. Set to true(1) if server is a
delivery function server. TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.115.1.1.60.1.2 |
cadPCEvMsgTypeType of message being counted. These map directly to the event
message opcodes in the Event Messaging referencero Enumeration .1.3.6.1.4.1.4998.1.1.115.1.1.60.1.3 |
cadPCEvMsgCountCount of rejected connections due to channel bandwidth
congestion since boot or since the last manual reset of
this count.ro Counter32 .1.3.6.1.4.1.4998.1.1.115.1.1.60.1.4 |
cadPCEvMsgCountLastClearedThe value of sysUptime when the event messaging counts were last cleared.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.115.1.1.61 |
cadPCCopsCountTableTable of counts of event messages that have been
sent to or received from each server. SEQUENCE OF CadPCCopsCountEntry .1.3.6.1.4.1.4998.1.1.115.1.1.65 |
cadPCCopsCountEntryThis entry contains counts of COPS messages. CadPCCopsCountEntry .1.3.6.1.4.1.4998.1.1.115.1.1.65.1 |
cadPCCopsServerIP address of CMS or PS server IpAddress .1.3.6.1.4.1.4998.1.1.115.1.1.65.1.1 |
cadPCCopsDirectiondirection of message flow from viewpoint of the CMTS Enumeration .1.3.6.1.4.1.4998.1.1.115.1.1.65.1.2 |
cadPCCopsOpcodeType of message being counted. These map directly to the COPS
opcodes in RFC 2748. Enumeration .1.3.6.1.4.1.4998.1.1.115.1.1.65.1.3 |
cadPCCopsCountCount of COPS messagesro Counter32 .1.3.6.1.4.1.4998.1.1.115.1.1.65.1.4 |
cadPCCopsCountLastClearedThe value of sysUptime when the COPS counts were last cleared.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.115.1.1.66 |
cadPCGateCtlCountTableTable of counts of event messages that have been
sent to or received from each server. SEQUENCE OF CadPCGateCtlCountEntry .1.3.6.1.4.1.4998.1.1.115.1.1.70 |
cadPCGateCtlCountEntryThis entry contains counts of gate control messages. CadPCGateCtlCountEntry .1.3.6.1.4.1.4998.1.1.115.1.1.70.1 |
cadPCGateCtlOpcodeType of message being counted. These map directly to the gate
command type opcodes in the DQoS spec. Enumeration .1.3.6.1.4.1.4998.1.1.115.1.1.70.1.1 |
cadPCGateCtlCountCount of messages since boot or since the last manual reset of
this count.ro Counter32 .1.3.6.1.4.1.4998.1.1.115.1.1.70.1.2 |
cadPCGateCtlCountLastClearedThe value of sysUptime when the gate control counts were last cleared.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.115.1.1.71 |
cadPCDefAdmCtlTableTable of Per-Priority PacketCable admission
control policies SEQUENCE OF CadPCDefAdmCtlEntry .1.3.6.1.4.1.4998.1.1.115.1.1.75 |
cadPCDefAdmCtlEntryThis entry contains all of the default PacketCable
admission policy data. CadPCDefAdmCtlEntry .1.3.6.1.4.1.4998.1.1.115.1.1.75.1 |
cadPCDefAdmCtlDirectionDirection for this default policy data. IfDirection (DOCS-QOS3-MIB) .1.3.6.1.4.1.4998.1.1.115.1.1.75.1.1 |
cadPCDefAdmCtlPriorityPriority value assigned to this row. CadPCAdmCtlPriority .1.3.6.1.4.1.4998.1.1.115.1.1.75.1.2 |
cadPCDefAdmCtlAllowedUsageMaximum percentage of resources that may be used by
requests at the corresponding priority level. This is
also the maximum amount of resources non-exclusively
allocated to sessions of this typerw INTEGER .1.3.6.1.4.1.4998.1.1.115.1.1.75.1.3 |
cadPCDefAdmCtlReservedUsageMinimum percentage of resources that may be used by
requests at the corresponding priority level. This is
also the maximum amount of resources exclusively
allocated to sessions of this type. If the value of this
object is non-zero, then a portion of the bandwidth will
be set aside for this priority only - reducing the
bandwidth that is available for normal data.rw INTEGER .1.3.6.1.4.1.4998.1.1.115.1.1.75.1.4 |
cadPC1xAdmCtlMapTableTable of mappings of PacketCable 1.x to PacketCable
Multimedia admission control policies SEQUENCE OF CadPC1xAdmCtlMapEntry .1.3.6.1.4.1.4998.1.1.115.1.1.80 |
cadPC1xAdmCtlMapEntryThis entry contains mapping of one PacketCable 1.x
admission policy to a PacketCable Multimedia policy. CadPC1xAdmCtlMapEntry .1.3.6.1.4.1.4998.1.1.115.1.1.80.1 |
cadPC1xAdmCtlMapPriorityPacketCable 1.x session class priority value Enumeration .1.3.6.1.4.1.4998.1.1.115.1.1.80.1.1 |
cadPCAdmCtlMapPriorityPacketCable Multimedia Priority value assigned to this row.ro CadPCAdmCtlPriority .1.3.6.1.4.1.4998.1.1.115.1.1.80.1.2 |
cadPCInterfaceAdmCtlTableTable of Per-Priority PacketCable admission control
policies. There exists a row per cable downstream and
per cable upstream for each of the CadPCAdmCtlPriorities.
For 1D:8U CAMs, the ifTypes populated are 128(downstream)
and 129(upstream). For DOCSIS 2.0 CAMs (2D:12U), the
ifTypes covered are 128(downstream) and
205(logical upstream). SEQUENCE OF CadPCInterfaceAdmCtlEntry .1.3.6.1.4.1.4998.1.1.115.1.1.85 |
cadPCInterfaceAdmCtlEntryThis entry contains all of the default PacketCable
admission policy data. CadPCInterfaceAdmCtlEntry .1.3.6.1.4.1.4998.1.1.115.1.1.85.1 |
cadPCInterfaceAdmCtlPriorityPriority value assigned to this row. CadPCAdmCtlPriority .1.3.6.1.4.1.4998.1.1.115.1.1.85.1.1 |
cadPCInterfaceAdmCtlAllowedUsageMaximum percentage of resources that may be used by
requests at the corresponding priority level. This is
also the maximum amount of resources non-exclusively
allocated to sessions of this typerw INTEGER .1.3.6.1.4.1.4998.1.1.115.1.1.85.1.2 |
cadPCInterfaceAdmCtlReservedUsageMinimum percentage of resources that may be used by
requests at the corresponding priority level. This is
also the maximum amount of resources exclusively
allocated to sessions of this type. If the value of this
object is non-zero, then a portion of the bandwidth will
be set aside for this priority only - reducing the
bandwidth that is available for normal data.rw INTEGER .1.3.6.1.4.1.4998.1.1.115.1.1.85.1.3 |
cadPCCAMCblMacTableTable of Per-CAM PacketCable Data SEQUENCE OF CadPCCAMCblMacEntry .1.3.6.1.4.1.4998.1.1.115.1.1.86 |
cadPCCAMCblMacEntryThis entry contains all of the PacketCable data that
is to be managed on a per-mac domain basis. CadPCCAMCblMacEntry .1.3.6.1.4.1.4998.1.1.115.1.1.86.1 |
cadPCCAMCblMacIfIndexIndicates whether the authorization module will allow a
DOCSIS MAC Messaging Dynamic Services request (DSx) without
a gate-ID in an authorization block. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4998.1.1.115.1.1.86.1.1 |
cadPCCAMCblMacFreeDSxAllowedIndicates whether the authorization module will allow a
DOCSIS MAC Messaging Dynamic Services request (DSx) without
a gate-ID in an authorization block.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.115.1.1.86.1.2 |
cadPCCblMacMaxOverloadDSaCallsthe max number of connections we will allow per 10 second interval
when the system cpu is in a normal condition, i.e. no overload.rw Unsigned32 .1.3.6.1.4.1.4998.1.1.115.1.1.86.1.3 |
cadPCCblMacMaxYellowOverloadDSaCallsthe max number of connections we will allow per 10 second interval
when the system cpu is in a yellow overload condition.rw Unsigned32 .1.3.6.1.4.1.4998.1.1.115.1.1.86.1.4 |
cadPCCblMacMaxRedOverloadDSaCallsthe max number of connections we will allow per 10 second interval
when the system cpu is in a red overload condition.rw Unsigned32 .1.3.6.1.4.1.4998.1.1.115.1.1.86.1.5 |
cadPCPEPIDHostnameIf set to true, the PEP-ID on the COPS connection will set to the currently
configured hostname of the CMTS. If false, the PEP-ID will will be set to
the local IP address of the COPS connection.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4998.1.1.115.1.1.90 |