Home/Catalog/CADANT-CMTS-MAC-MIB

CADANT-CMTS-MAC-MIB

AI MIB Summary

The CADANT-CMTS-MAC-MIB provides vendor-specific extensions for Cadant CMTS hardware to map DOCSIF-MIB CM status indices to MAC address tables, enabling precise tracking of cable modem registration states, signal quality metrics, and interface bindings. This module facilitates granular troubleshooting of subscriber connectivity by correlating physical MAC addresses with logical DOCSIS session parameters on the upstream and downstream channels.

This is the Cadant version of all the tables which are really indexed by MacAddress, but are index by docsIfCmtsCmStatusIndex in the DOCS-IF-MIB
Main OID:
cadMacMib.1.3.6.1.4.1.4998.1.1.20.2
306
Objects
Active
Status
13
Dependencies

Imported Objects

SNMPv2-SMI
SNMPv2-TC
IF-MIB
INET-ADDRESS-MIB
DOCS-IF3-MIB
IP-MIB
DOCS-IF-MIB
DOCS-QOS3-MIB
CADANT-TC
CADANT-PRODUCTS-MIB
CADANT-CMTS-LAYER2CMTS-MIB
SNMP-FRAMEWORK-MIB
CADANT-CMTS-DOWNCHANNEL-MIB

Objects

306 total
Object Name
cadMacMibThis is the Cadant version of all the tables which are really indexed by MacAddress, but are index by docsIfCmtsCmStatusIndex in the DOCS-IF-MIB
MODULE-IDENTITY
.1.3.6.1.4.1.4998.1.1.20.2
cadIfCmtsCmStatusNumberThe number of rows in the cadIfCmtsCmStatusTablero
Counter32
.1.3.6.1.4.1.4998.1.1.20.2.1
cadIfCmtsCmStatusTable
SEQUENCE OF CadIfCmtsCmStatusEntry
.1.3.6.1.4.1.4998.1.1.20.2.2
cadIfCmtsCmStatusEntry
CadIfCmtsCmStatusEntry
.1.3.6.1.4.1.4998.1.1.20.2.2.1
cadIfCmtsCmStatusMacAddressMAC address of this Cable Modem
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.4998.1.1.20.2.2.1.2
cadIfCmtsCmStatusDownChannelIfIndexro
InterfaceIndexOrZero (IF-MIB)
.1.3.6.1.4.1.4998.1.1.20.2.2.1.4
cadIfCmtsCmStatusUpChannelIfIndexro
InterfaceIndexOrZero (IF-MIB)
.1.3.6.1.4.1.4998.1.1.20.2.2.1.5
cadIfCmtsCmStatusValuero
CadIfCmtsCmStatusType
.1.3.6.1.4.1.4998.1.1.20.2.2.1.9
cadIfCmtsCmStatusDocsisVersionIndication whether the CM has registered as a 1.0 or 1.1 modem. This object has been deprecated with the new objects cadIfCmtsCmStatusDocsCapability and cadIfCmtsCmStatusDocsProvisioned. This object will be removed in a future release.rodeprecated
DocsisVersion
.1.3.6.1.4.1.4998.1.1.20.2.2.1.12
cadIfCmtsCmStatusRangFlapsNumber of times the CM has flapped in Ranging states.ro
Counter32
.1.3.6.1.4.1.4998.1.1.20.2.2.1.13
cadIfCmtsCmStatusProvFlapsNumber of times the CM has flapped in Provisioning states.ro
Counter32
.1.3.6.1.4.1.4998.1.1.20.2.2.1.14
cadIfCmtsCmStatusRegFlapsNumber of times the CM has flapped in Registered state.ro
Counter32
.1.3.6.1.4.1.4998.1.1.20.2.2.1.15
cadIfCmtsCmStatusLastFlapTimeTimestamp of the last time the CM flapped.ro
TimeStamp (SNMPv2-TC)
.1.3.6.1.4.1.4998.1.1.20.2.2.1.16
cadIfCmtsCmStatusInitRangTimeTimestamp of the last time the CM did initial ranging.ro
TimeStamp (SNMPv2-TC)
.1.3.6.1.4.1.4998.1.1.20.2.2.1.17
cadIfCmtsCmStatusPreFlapStatusCM status value prior to last CM flap.ro
CadIfCmtsCmStatusType
.1.3.6.1.4.1.4998.1.1.20.2.2.1.18
cadIfCmtsCmStatusConfigFilenameName of the file used to configure the modem during registration.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.4998.1.1.20.2.2.1.19
cadIfCmtsCmStatusBpiVersionThe value of this object is the version of Baseline Privacy for which this CM has registered.ro
Enumeration
.1.3.6.1.4.1.4998.1.1.20.2.2.1.20
cadIfCmtsCmStatusModemTypeThe type of modem that has been detected. This value is unknown(0) if the CMTS cannot determine a proper value. The standalone(1) value is set if the modem is a canonical DOCSIS 1.0 or 1.1 modem. The mta(2) value is used if the modem has been detected as being an MTA.ro
Enumeration
.1.3.6.1.4.1.4998.1.1.20.2.2.1.21
cadIfCmtsCmStatusModulationTypeIndicates modulation type currently used by the CM. Since this object specifically identifies PHY mode, the shared type is not permitted. If the upstream channel is unknown, this object returns a value of zero.ro
DocsisUpstreamType
.1.3.6.1.4.1.4998.1.1.20.2.2.1.22
cadIfCmtsCmStatusCmPtrAn index into the docsIfCmtsCmStatusTable.ro
Integer32
.1.3.6.1.4.1.4998.1.1.20.2.2.1.23
cadIfCmtsCmStatusTftpEnforceFailedIndicates if TFTP Enforce failed during the modem registration.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4998.1.1.20.2.2.1.24
cadIfCmtsCmStatusDynamicSecretFailedIndicates if Dynamic Secret failed during the modem registration.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4998.1.1.20.2.2.1.25
cadIfCmtsCmStatusDocsCapabilityThe highest DOCSIS version the modem is capable of operating at. Note this comes from the modem itself and not the configuration file.ro
DocsisVersion
.1.3.6.1.4.1.4998.1.1.20.2.2.1.26
cadIfCmtsCmStatusDocsProvisionedThe DOCSIS version the modem has currently been configured to operate at. Note this comes from the config file and is not based upon the hardware capabilities of the modem.ro
DocsisVersion
.1.3.6.1.4.1.4998.1.1.20.2.2.1.27
cadIfHVCmtsCmStatusLastFlapTimeThe timestamp of the last time the CM flapped, measured in centiseconds. This object is a 64-bit version of cadIfCmtsCmStatusLastFlapTime.ro
Counter64
.1.3.6.1.4.1.4998.1.1.20.2.2.1.28
cadIfHVCmtsCmStatusInitRangTimeThe timestamp of the last time the CM did initial ranging, measured in centiseconds. This object is a 64-bit version of cadIfCmtsCmStatusInitRangTime.ro
Counter64
.1.3.6.1.4.1.4998.1.1.20.2.2.1.29
cadIf3CmtsCmRegStatusIPv6AddrThis attribute represents the IPv6 address of the CM. If the CM has no Internet address assigned, or the Internet address is unknown, the value of this attribute is the all zeros address.ro
InetAddressIPv6 (INET-ADDRESS-MIB)
.1.3.6.1.4.1.4998.1.1.20.2.2.1.30
cadIf3CmtsCmRegStatusIPv6LinkLocalThis attribute represents the IPv6 local scope address of the CM. If the CM has no link local address assigned, or the Internet address is unknown, the value of this attribute is the all zeros address.ro
InetAddressIPv6 (INET-ADDRESS-MIB)
.1.3.6.1.4.1.4998.1.1.20.2.2.1.31
cadIf3CmtsCmRegStatusMdIfIndexThis attribute represents the interface Index of the CMTS MAC Domain where the CM is active. If the interface is unknown, the CMTS returns a value of zero.ro
InterfaceIndexOrZero (IF-MIB)
.1.3.6.1.4.1.4998.1.1.20.2.2.1.32
cadIf3CmtsCmRegStatusMdCmSgIdThis attribute represents the ID of the MAC Domain CM Service Group Id (MD-CM-SG-ID) in which the CM is registered. If the ID is unknown, the CMTS returns a value of zero.ro
Unsigned32
.1.3.6.1.4.1.4998.1.1.20.2.2.1.33
cadIf3CmtsCmRegStatusRcpIdThis attribute represents the RCP-ID associated with the CM. If the RCP-ID is unknown the CMTS returns a five octet long string of zeros.ro
RcpId (DOCS-IF3-MIB)
.1.3.6.1.4.1.4998.1.1.20.2.2.1.34
cadIf3CmtsCmRegStatusRccStatusIdThis attribute represents the RCC Id the CMTS used to configure the CM receive channel set during the registration process. If unknown, the CMTS returns the value zero.ro
Unsigned32
.1.3.6.1.4.1.4998.1.1.20.2.2.1.35
cadIf3CmtsCmRegStatusRcsIdThis attribute represents the Receive Channel Set (RCS) that the CM is currently using. If the RCS is unknown, the CMTS returns the value zero.ro
ChSetId (DOCS-IF3-MIB)
.1.3.6.1.4.1.4998.1.1.20.2.2.1.36
cadIf3CmtsCmRegStatusTcsIdThis attribute represents Transmit Channel Set (TCS) the CM is currently using. If the TCS is unknown, the CMTS returns the value zero.ro
ChSetId (DOCS-IF3-MIB)
.1.3.6.1.4.1.4998.1.1.20.2.2.1.37
cadIf3CmtsCmRegStatusLastRegTimeThis attribute represents the last time the CM registered.ro
DateAndTime (SNMPv2-TC)
.1.3.6.1.4.1.4998.1.1.20.2.2.1.38
cadIfCmtsCmStatusInetIpAddrTypeThe address type associated with the cable modem's IP addressro
InetAddressType (INET-ADDRESS-MIB)
.1.3.6.1.4.1.4998.1.1.20.2.2.1.39
cadIfCmtsCmStatusInetIpAddressThe IPv4 or IPv6 IP address assigned to the cable modem.ro
InetAddressIPv4or6 (CADANT-TC)
.1.3.6.1.4.1.4998.1.1.20.2.2.1.40
cadIf3CmtsCmRegStatusServiceTypeThis attribute denotes the queueing services the CM registered, either DOCSIS 1.1 QoS or DOCSIS 1.0 CoS mode.ro
DocsisQosVersion
.1.3.6.1.4.1.4998.1.1.20.2.2.1.41
cadIfCmtsCmStatusBpiEnabledThis attribute denotes if BPI is enabled on the CM.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4998.1.1.20.2.2.1.42
cadIfCmtsCmStatuseDocsisTypesThe types of eDOCSIS devices within the modem that have been detected. This list is derived from the vendor specific option (option 43.3) in the DHCP packet from the CM.ro
CadCpeDeviceTypes (CADANT-TC)
.1.3.6.1.4.1.4998.1.1.20.2.2.1.43
cadIfCmtsCmStatusDsPenaltiesNumber of times the CM has had a downstream SF penalized. When this count is cleared, Start and Duration will not be reset since this CM may still be in penaltyro
Counter32
.1.3.6.1.4.1.4998.1.1.20.2.2.1.44
cadIfCmtsCmStatusUsPenaltiesNumber of times the CM has had an upstream SF penalized. When this count is cleared, Start and Duration will not be reset since this CM may still be in penaltyro
Counter32
.1.3.6.1.4.1.4998.1.1.20.2.2.1.45
cadIfCmtsCmStatusLastDsPenaltyStartThe timestamp of the most recent time the system started penalizing a downstream SF on that CM.ro
Counter32
.1.3.6.1.4.1.4998.1.1.20.2.2.1.46
cadIfCmtsCmStatusLastDsPenaltyDurationThe duration of the last downstream penalty.ro
Counter32
.1.3.6.1.4.1.4998.1.1.20.2.2.1.47
cadIfCmtsCmStatusLastUsPenaltyStartThe timestamp of the most recent time the system started penalizing an upstream SF on that CM.ro
Counter32
.1.3.6.1.4.1.4998.1.1.20.2.2.1.48
cadIfCmtsCmStatusLastUsPenaltyDurationThe duration of the last upstream penalty.ro
Counter32
.1.3.6.1.4.1.4998.1.1.20.2.2.1.49
cadIfCmtsCmStatusRxAcPowerLostThis attribute denotes if the CMTS believes the CM to be in an AC Power Loss condition.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4998.1.1.20.2.2.1.50
cadIfCmtsCmStatusInsertionFlapsNumber of times the CM has flapped in Provisioned or Registered state within the flaplist insertion interval.ro
Counter32
.1.3.6.1.4.1.4998.1.1.20.2.2.1.51
cadIf3CmtsCmRegStatusEnergyMgtCapabilityThis attribute indicates the Energy Management Features the CM supports. If this attribute returns em1x1Mode(0) bit set, the CM supports the Energy Management 1x1 feature. If this attribute returns em1x1Mode(0) bit cleared, the CM does not support the Energy Management 1x1 feature. Note: This attribute only indicates if an Energy Management Feature is supported by the CM and does not indicate if the feature is enabled/disabled via the CM config file and registration request/response exchange and and does not indicate whether the CM is actively operation in an Energy Management Mode.ro
Bits
.1.3.6.1.4.1.4998.1.1.20.2.2.1.52
cadIf3CmtsCmRegStatusEnergyMgtEnabledThis attribute indicates which, if any, of the Energy Management Features are enabled for this CM. If this attribute returns em1x1Mode(0) bit set, the CM is configured with the Energy Management 1x1 Feature enabled. If this attribute returns all bits cleared, the CM will not request to operate in any Energy Management mode of operation. Note: This attribute only indicates if an Energy Management Feature is enabled/disabled via the CM config file and registration request/response exchange and does not indicate whether the CM is actively operating in an Energy Management Mode.ro
Bits
.1.3.6.1.4.1.4998.1.1.20.2.2.1.53
cadIf3CmtsCmRegStatusEnergyMgtOperStatusThis attribute indicates whether the CM is currently operating in an Energy Management Mode. If this attribute returns em1x1Mode(0) bit set, the CM is operating in Energy Management 1x1 Mode. If this attribute returns all bits cleared, the CM is not operating in any Energy Management Mode. This attribute always returns 0x00 (no bits set) in the case when docsIf3CmtsCmRegStatusEnergyMgtEnabled is set to 0x00 (no Energy Management Features enabled).ro
Bits
.1.3.6.1.4.1.4998.1.1.20.2.2.1.54
cadIf3CmtsCmStatsEm1x1ModeTotalDurationThis attribute indicates the total time duration, in seconds that this CM (identified by docsIf3CmtsCmRegStatusId ) was in Energy Management 1x1 mode, not including the duration of time if it is Currently in Energy Management 1x1 mode as controlled by the DBC-REQ Energy Management 1x1 Mode Indicator TLV.ro
Unsigned32 UNITS "seconds"
.1.3.6.1.4.1.4998.1.1.20.2.2.1.55
cadIf3CmtsCmStatsEm1x1ModeEntryTimeThis attribute indicates the sysUpTime when the CM started its current Energy Management 1x1 mode cycle, in seconds. Zero indicates the CM is currently not in the Energy Management 1x1 mode.ro
Unsigned32 UNITS "seconds"
.1.3.6.1.4.1.4998.1.1.20.2.2.1.56
cadIfCmtsCmCountsTable
SEQUENCE OF CadIfCmtsCmCountsEntry
.1.3.6.1.4.1.4998.1.1.20.2.3
cadIfCmtsCmCountsEntry
CadIfCmtsCmCountsEntry
.1.3.6.1.4.1.4998.1.1.20.2.3.1
cadIfCmtsCmCountsRxPowerThe reciever power as perceived for upstream data from this cable modem. If the receive power is unknown, this object returns a value of zero.ro
TenthdBmV UNITS "dBmV"
.1.3.6.1.4.1.4998.1.1.20.2.3.1.1
cadIfCmtsCmCountsTimingOffsetA measure of the current round trip time for this cable modem. Used for timing of CM upstream transmissions to ensure synchronized arrivals at the CMTS. Units are in terms of 6.25 microseconds/(64*256). Returns zero if the value is unknown.ro
Integer32
.1.3.6.1.4.1.4998.1.1.20.2.3.1.2
cadIfCmtsCmCountsEqualizationDataEqualization data for this CM. Returns an empty string if the value is unknown or if there is no equalization data available or defined.ro
OCTET STRING
.1.3.6.1.4.1.4998.1.1.20.2.3.1.3
cadIfCmtsCmCountsRangeReqOpportunitiesThe number of ranging request opportunities.ro
Counter32
.1.3.6.1.4.1.4998.1.1.20.2.3.1.4
cadIfCmtsCmCountsRangeReqReceivedThe number of ranging request frames received.ro
Counter32
.1.3.6.1.4.1.4998.1.1.20.2.3.1.5
cadIfCmtsCmCountsPowerAdjExceedsThresholdThe number of ranging request which results in a power adjustment greater than the threshold value.ro
Counter32
.1.3.6.1.4.1.4998.1.1.20.2.3.1.6
cadIfCmtsCmCountsUpChIfIndexThe upstream channel ifIndex.
InterfaceIndex (IF-MIB)
.1.3.6.1.4.1.4998.1.1.20.2.3.1.7
cadIfCmtsCmCountsSignalNoiseThis attribute represents Signal/Noise ratio as perceived for upstream data from the CM on this upstream channel.ro
TenthdB UNITS "TenthdB"
.1.3.6.1.4.1.4998.1.1.20.2.3.1.8
cadIfCmtsCmCountsUnerroredsThis attribute represents the codewords received without error from the CM on this interface. Discontinuities in the value of this counter can occur at re-initialization of the managed system, and at other times as indicated by the value of ifCounterDiscontinuityTime for the associated upstream channel.ro
Counter32
.1.3.6.1.4.1.4998.1.1.20.2.3.1.9
cadIfCmtsCmCountsCorrectedsThis attribute represents the codewords received with correctable errors from the CM on this upstream channeli. Discontinuities in the value of this counter can occur at re-initialization of the managed system, and at other times as indicated by the value of ifCounterDiscontinuityTime for the associated upstream channel.ro
Counter32
.1.3.6.1.4.1.4998.1.1.20.2.3.1.10
cadIfCmtsCmCountsUncorrectablesThis attribute represents the codewords received with uncorrectable errors from the CM on this upstream channel. Discontinuities in the value of this counter can occur at re-initialization of the managed system, and at other times as indicated by the value of ifCounterDiscontinuityTime for the associated upstream channel.ro
Counter32
.1.3.6.1.4.1.4998.1.1.20.2.3.1.11
cadIfCmtsCmCountsTxPowerThis attribute holds the value of CM channel transmit power that is included in the last CM ranging request message (in units of quarter dBmV). This value is updated at the receipt of every station maintenance message. Default value is zero. The value of this MIB object will be non-zero only for D3.0 CMs when MTCM is enabled. If the value of this MIB object is 0, it means that the object is not populated yet or MTCM is disabled (or both).ro
Counter32
.1.3.6.1.4.1.4998.1.1.20.2.3.1.12
cadIfCmtsServiceTable
SEQUENCE OF CadIfCmtsServiceEntry
.1.3.6.1.4.1.4998.1.1.20.2.4
cadIfCmtsServiceEntry
CadIfCmtsServiceEntry
.1.3.6.1.4.1.4998.1.1.20.2.4.1
cadIfCmtsServiceIdro
Integer32
.1.3.6.1.4.1.4998.1.1.20.2.4.1.1
cadIfCmtsServiceMacAddressMAC address of the Cable Modem this SID is associated with.ro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.4998.1.1.20.2.4.1.2
cadIfCmtsServiceAdminStatusro
Enumeration
.1.3.6.1.4.1.4998.1.1.20.2.4.1.3
cadIfCmtsServiceQosProfileThis should be 1 if this is the default flow.ro
Integer32
.1.3.6.1.4.1.4998.1.1.20.2.4.1.4
cadIfCmtsServiceCreateTimero
TimeStamp (SNMPv2-TC)
.1.3.6.1.4.1.4998.1.1.20.2.4.1.5
cadIfQosProfPriorityro
Integer32
.1.3.6.1.4.1.4998.1.1.20.2.4.1.8
cadIfQosProfMaxUpBandwidthro
Integer32
.1.3.6.1.4.1.4998.1.1.20.2.4.1.9
cadIfQosProfGuarUpBandwidthro
Integer32
.1.3.6.1.4.1.4998.1.1.20.2.4.1.10
cadIfQosProfMaxDownBandwidthro
Integer32
.1.3.6.1.4.1.4998.1.1.20.2.4.1.11
cadIfQosProfMaxTxBurstro
Integer32
.1.3.6.1.4.1.4998.1.1.20.2.4.1.12
cadIfQosProfBaselinePrivacyro
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4998.1.1.20.2.4.1.13
cadIfCmtsPtrToMacTableThis table is the inverse of docsIfCmtsMacToCmTable
SEQUENCE OF CadIfCmtsPtrToMacEntry
.1.3.6.1.4.1.4998.1.1.20.2.5
cadIfCmtsPtrToMacEntry
CadIfCmtsPtrToMacEntry
.1.3.6.1.4.1.4998.1.1.20.2.5.1
cadIfCmtsCmPtrAn row index into the docsIfCmtsCmStatusTable.
Integer32
.1.3.6.1.4.1.4998.1.1.20.2.5.1.1
cadIfCmtsCmMacThe MAC address this CMPtr is for.ro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.4998.1.1.20.2.5.1.2
cadSubMgtCpeControlTableThis table extends the cadifCmtsCmStatusTable and adds 4 objects which reflect the state of subscriber management on a particular CM.
SEQUENCE OF CadSubMgtCpeControlEntry
.1.3.6.1.4.1.4998.1.1.20.2.6
cadSubMgtCpeControlEntry
CadSubMgtCpeControlEntry
.1.3.6.1.4.1.4998.1.1.20.2.6.1
cadSubMgtCpeControlMaxCpeIpv4ro
Integer32
.1.3.6.1.4.1.4998.1.1.20.2.6.1.1
cadSubMgtCpeControlActivero
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4998.1.1.20.2.6.1.2
cadSubMgtCpeControlLearnablero
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4998.1.1.20.2.6.1.3
cadSubMgtCpeControlResetro
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4998.1.1.20.2.6.1.4
cadSubMgtCpeControlMaxCpeIpv6AddressesThis attribute represents the number of simultaneous IPv6 prefixes permitted ofr CPE connected to the CM.ro
Integer32
.1.3.6.1.4.1.4998.1.1.20.2.6.1.5
cadSubMgtCpeControlLastResetThis attribute represents the system Up Time of the last set to 'true' of the Reset attribute of this instance. Zero if never reset.ro
TimeStamp (SNMPv2-TC)
.1.3.6.1.4.1.4998.1.1.20.2.6.1.6
cadSubMgtCpeIpTable
SEQUENCE OF CadSubMgtCpeIpEntry
.1.3.6.1.4.1.4998.1.1.20.2.7
cadSubMgtCpeIpEntryAn entry in the cadSubMgtCpeIpTable. The first index is the specific modem we're referring to, the second index is the IP address of a specific CPE.
CadSubMgtCpeIpEntry
.1.3.6.1.4.1.4998.1.1.20.2.7.1
cadSubMgtCpeIpIndexrefer to DocsSubMgtCpeIpIndex
Integer32
.1.3.6.1.4.1.4998.1.1.20.2.7.1.1
cadSubMgtCpeIpAddrrefer to DocsSubMgtCpeIpAddrro
InetAddressIPv4or6 (CADANT-TC)
.1.3.6.1.4.1.4998.1.1.20.2.7.1.2
cadSubMgtCpeIpLearnedTRUE if this IP addresses was learned, FALSE if it was provisionedro
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4998.1.1.20.2.7.1.3
cadSubMgtCpeIpMacAddrThe MAC address of this CPE.ro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.4998.1.1.20.2.7.1.4
cadSubMgtCpeFilterDownstreamThis is the per-CPE equivalent of docsSubMgtSubFilterDownstreamro
Integer32
.1.3.6.1.4.1.4998.1.1.20.2.7.1.5
cadSubMgtCpeFilterUpstreamThis is the per-CPE equivalent of docsSubMgtSubFilterUpstreamro
Integer32
.1.3.6.1.4.1.4998.1.1.20.2.7.1.6
cadSubMgtCpeCpeTypeThis is the equivalent of docsSubMgtCpeTypero
Enumeration
.1.3.6.1.4.1.4998.1.1.20.2.7.1.7
cadSubMgtCpeIpAddrTypeThe IP address type for this CPE.ro
InetAddressType (INET-ADDRESS-MIB)
.1.3.6.1.4.1.4998.1.1.20.2.7.1.8
cadSubMgtCmFilterTable
SEQUENCE OF CadSubMgtCmFilterEntry
.1.3.6.1.4.1.4998.1.1.20.2.8
cadSubMgtCmFilterEntryAn entry in the cadSubMgtCmFilterTable. The index is the specific modem we're referring to.
CadSubMgtCmFilterEntry
.1.3.6.1.4.1.4998.1.1.20.2.8.1
cadSubMgtSubFilterDownstreamro
Integer32
.1.3.6.1.4.1.4998.1.1.20.2.8.1.1
cadSubMgtSubFilterUpstreamro
Integer32
.1.3.6.1.4.1.4998.1.1.20.2.8.1.2
cadSubMgtCmFilterDownstreamro
Integer32
.1.3.6.1.4.1.4998.1.1.20.2.8.1.3
cadSubMgtCmFilterUpstreamro
Integer32
.1.3.6.1.4.1.4998.1.1.20.2.8.1.4
cadSubMgtPsFilterDownstreamro
Integer32
.1.3.6.1.4.1.4998.1.1.20.2.8.1.5
cadSubMgtPsFilterUpstreamro
Integer32
.1.3.6.1.4.1.4998.1.1.20.2.8.1.6
cadSubMgtMtaFilterDownstreamro
Integer32
.1.3.6.1.4.1.4998.1.1.20.2.8.1.7
cadSubMgtMtaFilterUpstreamro
Integer32
.1.3.6.1.4.1.4998.1.1.20.2.8.1.8
cadSubMgtStbFilterDownstreamro
Integer32
.1.3.6.1.4.1.4998.1.1.20.2.8.1.9
cadSubMgtStbFilterUpstreamro
Integer32
.1.3.6.1.4.1.4998.1.1.20.2.8.1.10
cadTpFdbTablesee dot1dTpFdbTable
SEQUENCE OF CadTpFdbEntry
.1.3.6.1.4.1.4998.1.1.20.2.9
cadTpFdbEntrysee CadTpFdbEntry
CadTpFdbEntry
.1.3.6.1.4.1.4998.1.1.20.2.9.1
cadTpFdbAddresssee dot1dTpFdbAddress
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.4998.1.1.20.2.9.1.1
cadTpFdbIfIndexThe ifIndex of the bridge port this MAC address was learned on. For ECard ports, this is the ifIndex of eport itself. However, for DCard ports, this is the ifIndex of the DOCSIS MacLayer (ifType=127). IfIndices of types 128 (DOCSIS downstream port) and 129 (DOCSIS upstream port) should not be used in this table.
InterfaceIndex (IF-MIB)
.1.3.6.1.4.1.4998.1.1.20.2.9.1.2
cadTpFdbStatussee dot1dTpFdbStatusro
Enumeration
.1.3.6.1.4.1.4998.1.1.20.2.9.1.3
cadIfQosProfileLookupTable
SEQUENCE OF CadIfQosProfileLookupEntry
.1.3.6.1.4.1.4998.1.1.20.2.10
cadIfQosProfileLookupEntry
CadIfQosProfileLookupEntry
.1.3.6.1.4.1.4998.1.1.20.2.10.1
cadIfQosProfileLookupIndexThis should be 1 if this is the default flow.ro
Integer32
.1.3.6.1.4.1.4998.1.1.20.2.10.1.1
cadIfQosProfileLookupRefCountThe number of cadIfCmtsServiceEntry rows that have the same cadIfQosProf values. If this count reaches zero(0), this row should be deleted.ro
Counter32
.1.3.6.1.4.1.4998.1.1.20.2.10.1.2
cadChannelToCmTable
SEQUENCE OF CadChannelToCmEntry
.1.3.6.1.4.1.4998.1.1.20.2.11
cadChannelToCmEntry
CadChannelToCmEntry
.1.3.6.1.4.1.4998.1.1.20.2.11.1
cadChannelToCmPtrAn index into the docsIf3CmtsCmRegStatusTable.ro
Integer32
.1.3.6.1.4.1.4998.1.1.20.2.11.1.1
cadCmtsCmStatusSummaryTabledeprecated
SEQUENCE OF CadCmtsCmStatusSummaryEntry
.1.3.6.1.4.1.4998.1.1.20.2.12
cadCmtsCmStatusSummaryEntrydeprecated
CadCmtsCmStatusSummaryEntry
.1.3.6.1.4.1.4998.1.1.20.2.12.1
cadCmtsCmStatusNumOtherThe number of modems on this upstream channel in state other(1)rodeprecated
Integer32
.1.3.6.1.4.1.4998.1.1.20.2.12.1.1
cadCmtsCmStatusNumRangingThe number of modems on this upstream channel in state ranging(2)rodeprecated
Integer32
.1.3.6.1.4.1.4998.1.1.20.2.12.1.2
cadCmtsCmStatusNumRangingAbortedThe number of modems on this upstream channel in state rangingAborted(3)rodeprecated
Integer32
.1.3.6.1.4.1.4998.1.1.20.2.12.1.3
cadCmtsCmStatusNumRangingCompleteThe number of modems on this upstream channel in state rangingComplete(4)rodeprecated
Integer32
.1.3.6.1.4.1.4998.1.1.20.2.12.1.4
cadCmtsCmStatusNumIpCompleteThe number of modems on this upstream channel in state ipComplete(5)rodeprecated
Integer32
.1.3.6.1.4.1.4998.1.1.20.2.12.1.5
cadCmtsCmStatusNumRegistrationCompleteThe number of modems on this upstream channel in state registrationComplete(6)rodeprecated
Integer32
.1.3.6.1.4.1.4998.1.1.20.2.12.1.6
cadCmtsCmStatusNumAccessDeniedThe number of modems on this upstream channel in state accessDenied(7)rodeprecated
Integer32
.1.3.6.1.4.1.4998.1.1.20.2.12.1.7
cadCmtsCmStatusNumRangFlapsThe number of times a CM on this upstream channel has reset in Ranging states.rodeprecated
Counter32
.1.3.6.1.4.1.4998.1.1.20.2.12.1.8
cadCmtsCmStatusNumProvFlapsThe number of times a CM on this upstream channel has reset in Provisioning states.rodeprecated
Counter32
.1.3.6.1.4.1.4998.1.1.20.2.12.1.9
cadCmtsCmStatusNumRegFlapsThe number of times a CM on this upstream channel has reset in Registered state.rodeprecated
Counter32
.1.3.6.1.4.1.4998.1.1.20.2.12.1.10
cadCmtsCmStatusNumOperationalThe number of modems on this upstream channel in state operational(8) - deprecatedrodeprecated
Integer32
.1.3.6.1.4.1.4998.1.1.20.2.12.1.11
cadCmtsCmStatusNumRegisteredBpiInitializingThe number of modems on this upstream channel in state RegisteredBpiInitializing(9)rodeprecated
Integer32
.1.3.6.1.4.1.4998.1.1.20.2.12.1.12
cadCmtsCmStatusNumTotalThe total count of cable modems on this upstream channel.rodeprecated
Integer32
.1.3.6.1.4.1.4998.1.1.20.2.12.1.13
cadCmtsCmStatusNumActiveThe count of cable modems that are active. Active cable modems are recognized by the docsIfCmtsCmStatusValue other than other(1).rodeprecated
Integer32
.1.3.6.1.4.1.4998.1.1.20.2.12.1.14
cadCmtsCmStatusNumRegisteredThe count of cable modems that are registered and online on this upstream. Registered cable modems are those included in the counts: cadCmtsCmStatusNumRegistrationComplete, cadCmtsCmStatusNumOperational and cadCmtsCmStatusNumRegisteredBpiInitializing.rodeprecated
Integer32
.1.3.6.1.4.1.4998.1.1.20.2.12.1.15
cadArpTableThe ARP table. It can easily used for mapping from IP addresses to physical addresses.
SEQUENCE OF CadArpEntry
.1.3.6.1.4.1.4998.1.1.20.2.13
cadArpEntryEach entry contains one IpAddress to MAC address equivalence.
CadArpEntry
.1.3.6.1.4.1.4998.1.1.20.2.13.1
cadArpIfIndexThe interface on which this entry's equivalence is effective. The interface identified by a particular value of this index is the same interface as identified by the same value of the IF-MIB's ifIndex.
InterfaceIndex (IF-MIB)
.1.3.6.1.4.1.4998.1.1.20.2.13.1.1
cadArpAddressTypeThe IP address type for this MAC to IP address entry router interface.
InetAddressType (INET-ADDRESS-MIB)
.1.3.6.1.4.1.4998.1.1.20.2.13.1.2
cadArpNetAddressThe IpAddress corresponding to the media-dependent 'physical' address.
InetAddressIPv4or6 (CADANT-TC)
.1.3.6.1.4.1.4998.1.1.20.2.13.1.3
cadArpMacAddressThe 'physical' address associated with this IP address.rw
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.4998.1.1.20.2.13.1.4
cadArpTypeThe type of mapping. See IpNetToPhysicalType in the IP-MIB for a description.rw
Enumeration
.1.3.6.1.4.1.4998.1.1.20.2.13.1.5
cadArpStateThe state of the mapping. See ipNetToPhysicalState in the IP-MIB for a description.ro
Enumeration
.1.3.6.1.4.1.4998.1.1.20.2.13.1.6
cadArpL3IfIndexThe interface on which this entry's equivalence is effective. The interface identified by a particular value of this index is the same interface as identified by the same value of the IF-MIB's ifIndex.
InterfaceIndexOrZero (IF-MIB)
.1.3.6.1.4.1.4998.1.1.20.2.13.1.7
cadMacControl
OBJECT IDENTIFIER
.1.3.6.1.4.1.4998.1.1.20.2.14
cadMacClearFlapCountsThis variable always returns false(2) upon reading. When set to true(1), the flap counts in the Mac Mib are cleared.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4998.1.1.20.2.14.1
cadMacResetCMMacAddressThis variable always returns 00:00:00:00:00:00 upon reading. When set to any other value, an attempt is made to find the Cable Modem whose MAC address matches that value and then reset that Cable Modem.rw
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.4998.1.1.20.2.14.2
cadMacDeleteMacAddressThis variable always returns 00:00:00:00:00:00 upon reading. When set to any other value, an attempt is made to find the device whose MAC address matches that value and remove all data pertaining to that device from the CMTS.rw
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.4998.1.1.20.2.14.3
cadMacClearDenyCountsThis variable always returns false(2) upon reading. When set to true(1), the counts in the modem deny status table are cleared.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4998.1.1.20.2.14.4
cadMacClearDenyCountMacAddrThis variable always returns 00:00:00:00:00:00 upon reading. When set to any other value, the count in the modem deny status table whose MAC address matches that value is cleared.rw
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.4998.1.1.20.2.14.5
cadMacClearFlapCountMacAddrThis variable always returns 00:00:00:00:00:00 upon reading. When set to any other value, the the modem flap count in cadIfCmtsCmStatusTable whose MAC address matches that value is cleared.rw
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.4998.1.1.20.2.14.6
cadMacRecalculateCmSummaryIfIndexThis variable always returns 0 upon reading. When set to an ifIndex of a cable MAC domain, the modem summary count of the MAC domain will be recalculated.rw
InterfaceIndexOrZero (IF-MIB)
.1.3.6.1.4.1.4998.1.1.20.2.14.7
cadMacClearFlapCountsByIfIndexThis variable always returns 0 upon reading. When set to an ifIndex of a cable MAC domain, the flap counts of the MAC domain will be cleared.rw
InterfaceIndexOrZero (IF-MIB)
.1.3.6.1.4.1.4998.1.1.20.2.14.8
cadMacClearPenaltyCountsThis variable always returns false(2) upon reading. When set to true(1), the CM penalty counts in the cadIfCmtsCmStatusTable and the per penalty rule counts in cadEnforceRuleCountsTable are cleared.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4998.1.1.20.2.14.9
cadMacClearPenaltyCountsByIfIndexThis variable always returns 0 upon reading. When set to an ifIndex of a cable MAC domain, the modem penalty count in cadIfCmtsCmStatusTable for all CMs in the MAC domain will be cleared.rw
InterfaceIndexOrZero (IF-MIB)
.1.3.6.1.4.1.4998.1.1.20.2.14.10
cadMacClearPenaltyCountMacAddrThis variable always returns 00:00:00:00:00:00 upon reading. When set to any other value, the modem penalty count in cadIfCmtsCmStatusTable whose MAC address matches that value is cleared.rw
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.4998.1.1.20.2.14.11
cadMacClearPenaltyCountScnThis variable always returns a single blank character upon reading. When set to any other value, the enforce rule penalty count in cadEnforceRuleCountsTable whose SCN matches that value is cleared.rw
SnmpAdminString (SNMP-FRAMEWORK-MIB)
.1.3.6.1.4.1.4998.1.1.20.2.14.12
cadQosCmtsMacToSrvFlowTableThis table provide for referencing the service flows associated with a particular cable modem. This allows for indexing into other docsQos tables that are indexed by service flow ID and ifIndex.
SEQUENCE OF CadQosCmtsMacToSrvFlowEntry
.1.3.6.1.4.1.4998.1.1.20.2.15
cadQosCmtsMacToSrvFlowEntryAn entry is created by CMTS for each service flow connected to this CMTS.
CadQosCmtsMacToSrvFlowEntry
.1.3.6.1.4.1.4998.1.1.20.2.15.1
cadQosCmtsCmMacThe MAC address for the referenced CM.
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.4998.1.1.20.2.15.1.1
cadQosCmtsServiceFlowIdAn index assigned to a service flow by CMTS.ro
Unsigned32
.1.3.6.1.4.1.4998.1.1.20.2.15.1.2
cadQosCmtsIfIndexThe ifIndex of ifType docsCableMacLayter(127) on the CMTS that is connected to the Cable Modem.ro
InterfaceIndex (IF-MIB)
.1.3.6.1.4.1.4998.1.1.20.2.15.1.3
cadQosServiceClassTableThis table extends the docQosServiceClassTable and adds 1 object which is the peak traffic rate shaped to while traffic still conforms to the policing parameters.
SEQUENCE OF CadQosServiceClassEntry
.1.3.6.1.4.1.4998.1.1.20.2.19
cadQosServiceClassEntry
CadQosServiceClassEntry
.1.3.6.1.4.1.4998.1.1.20.2.19.1
cadQosServiceClassPeakTrafficRatePeak traffic rate shaped to while traffic still conforms to the policing parameters (Tmax and Burst). If the peak rate is set to a value greater than Tmax, then the traffic will be shaped to the peak rate until the traffic is non-conforming to the policing parameters (Tmax and Burst), and then the traffic will be shaped to the Tmax rate. If the peak rate is less than the Tmax for a flow, then all traffic for that flow will shaped to the Tmax rate, regardless of the Burst parameter. Setting the peak rate to a value of 0 will result no peak rate limiting and flows having virtually unlimited bandwidth until their burst size is used up.rw
BitRate (DOCS-QOS3-MIB)
.1.3.6.1.4.1.4998.1.1.20.2.19.1.1
cadQosServiceClassLatencyControlledFlowFlagThis object indicated whether the flow should be should be latency-controlled. If this flag is not true than the legacy (bitrate-based) scheduler will be used.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4998.1.1.20.2.19.1.2
cadCmtsCmVendorTableThe table of known and configured cable modem vendors as identified by the first three bytes of their MAC address, also known as the OUI
SEQUENCE OF CadCmtsCmVendorEntry
.1.3.6.1.4.1.4998.1.1.20.2.20
cadCmtsCmVendorEntryEach row contains an OUI-to-vendor association
CadCmtsCmVendorEntry
.1.3.6.1.4.1.4998.1.1.20.2.20.1
cadCmtsCmVendorOUIFirst three(3) bytes of the MAC address of the cable modems
OUIAddress (CADANT-TC)
.1.3.6.1.4.1.4998.1.1.20.2.20.1.1
cadCmtsCmVendorNameName of the cable modem vendor using this OUIrw
DisplayString
.1.3.6.1.4.1.4998.1.1.20.2.20.1.2
cadCmtsCmVendorRowStatusControl object for each rowrw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.4998.1.1.20.2.20.1.3
cadIfCmtsMacToIpTableThis table provides a SNMP style wrapper to the MAC DB with a direct translation from MAC to the IP address and CM MAC associated with the CM or CPE MAC.
SEQUENCE OF CadIfCmtsMacToIpEntry
.1.3.6.1.4.1.4998.1.1.20.2.21
cadIfCmtsMacToIpEntryPer MAC information stored in MAC DB
CadIfCmtsMacToIpEntry
.1.3.6.1.4.1.4998.1.1.20.2.21.1
cadIfCmtsMacAddrMAC address of CM or CPE
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.4998.1.1.20.2.21.1.1
cadIfCmtsMacCmMacAddrMac address of the CM associated with the MAC address. If this is an entry for a CM, the it will be the same as the cadIfCmtsmac. For a CPE MAC, this will be the MAC address of the CM.ro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.4998.1.1.20.2.21.1.3
cadIfCmtsMacInetIpAddrInet Ip address (IPv4 or IPv6)associated with this CM or CPE MAC address.rodeprecated
InetAddressIPv4or6 (CADANT-TC)
.1.3.6.1.4.1.4998.1.1.20.2.21.1.4
cadIfCmtsMacInetIpAddrTypeInet Ip address type (IPv4 or IPv6)associated with this CM or CPE MAC address.rodeprecated
InetAddressType (INET-ADDRESS-MIB)
.1.3.6.1.4.1.4998.1.1.20.2.21.1.5
cadCmDenyTableThe list of cable modems that is configured to be denied for traffic. Maximum number of rows is 100.
SEQUENCE OF CadCmDenyEntry
.1.3.6.1.4.1.4998.1.1.20.2.22
cadCmDenyEntryThe collection of deny modems.
CadCmDenyEntry
.1.3.6.1.4.1.4998.1.1.20.2.22.1
cadCmDenyMacAddressThe MAC address of the CM that is denied for any traffic.
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.4998.1.1.20.2.22.1.1
cadCmDenyRowStatusThe status of this conceptual row. To create a row in this table, set this object to createAndGo(4). Support of the values includes createAndGo(4) and destroy(6)rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.4998.1.1.20.2.22.1.2
cadCmDenyStatusTableTable of cable modem deny status.
SEQUENCE OF CadCmDenyStatusEntry
.1.3.6.1.4.1.4998.1.1.20.2.23
cadCmDenyStatusEntryEntry of cable modem deny status.
CadCmDenyStatusEntry
.1.3.6.1.4.1.4998.1.1.20.2.23.1
cadCmDenyRecentIfIndexThe ifIndex of upstream channel where the denied modem was last on or attempted.
InterfaceIndex (IF-MIB)
.1.3.6.1.4.1.4998.1.1.20.2.23.1.1
cadCmDenyRecentTimeThe actual clock time when the modem was last denied.ro
DateAndTime (SNMPv2-TC)
.1.3.6.1.4.1.4998.1.1.20.2.23.1.2
cadCmDenyAttemptsThe number of attempts received from the denied modem.ro
Counter32
.1.3.6.1.4.1.4998.1.1.20.2.23.1.3
cadCpeHostAuthorizationTable
SEQUENCE OF CadCpeHostAuthorizationEntry
.1.3.6.1.4.1.4998.1.1.20.2.24
cadCpeHostAuthorizationEntry
CadCpeHostAuthorizationEntry
.1.3.6.1.4.1.4998.1.1.20.2.24.1
cadCpeHostAuthCmMacAddressThe CM MAC address.
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.4998.1.1.20.2.24.1.1
cadCpeHostAuthCpeMacAddressThe CPE MAC address.
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.4998.1.1.20.2.24.1.2
cadCpeHostAuthCpeIpAddressThe CPE IP address.
IpAddress
.1.3.6.1.4.1.4998.1.1.20.2.24.1.3
cadCpeHostAuthRowStatusObject to control the row addition/deletion in this table.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.4998.1.1.20.2.24.1.4
cadIfCmtsInetIpToCmMacTableInet MAC DB interface for SNMP
SEQUENCE OF CadIfCmtsInetIpToCmMacEntry
.1.3.6.1.4.1.4998.1.1.20.2.25
cadIfCmtsInetIpToCmMacEntryPer IP information stored in MAC DB
CadIfCmtsInetIpToCmMacEntry
.1.3.6.1.4.1.4998.1.1.20.2.25.1
cadIfCmtsInetIpMacAddrTypeInet IP address type of CM or CPE
InetAddressType (INET-ADDRESS-MIB)
.1.3.6.1.4.1.4998.1.1.20.2.25.1.1
cadIfCmtsInetIpMacInet IP address of CM or CPE
InetAddressIPv4or6 (CADANT-TC)
.1.3.6.1.4.1.4998.1.1.20.2.25.1.2
cadIfCmtsInetIpCmMacMac address of CM associated with this CM or CPE IPro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.4998.1.1.20.2.25.1.3
cadIfCmtsInetIpCpeMacMac address of CPE associated with this CPE IP. This is set to 0 for CM IPs.ro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.4998.1.1.20.2.25.1.4
cadCmtsCmStatusMacSummaryTabledeprecated
SEQUENCE OF CadCmtsCmStatusMacSummaryEntry
.1.3.6.1.4.1.4998.1.1.20.2.26
cadCmtsCmStatusMacSummaryEntrydeprecated
CadCmtsCmStatusMacSummaryEntry
.1.3.6.1.4.1.4998.1.1.20.2.26.1
cadCmtsCmStatusMacNumOtherThe number of modems on this mac domain in state other(1)rodeprecated
Integer32
.1.3.6.1.4.1.4998.1.1.20.2.26.1.1
cadCmtsCmStatusMacNumInitRangingThe number of modems on this mac domain in state initialRanging(2)rodeprecated
Integer32
.1.3.6.1.4.1.4998.1.1.20.2.26.1.2
cadCmtsCmStatusMacNumRangingCompleteThe number of modems on this mac domain in state rangingAutoAdjComplete(4)rodeprecated
Integer32
.1.3.6.1.4.1.4998.1.1.20.2.26.1.3
cadCmtsCmStatusMacNumStartEaeThe number of modems on this mac domain in state startEae(10)rodeprecated
Integer32
.1.3.6.1.4.1.4998.1.1.20.2.26.1.4
cadCmtsCmStatusMacNumStartDhcpv4The number of modems on this mac domain in state startDhcpv4(11)rodeprecated
Integer32
.1.3.6.1.4.1.4998.1.1.20.2.26.1.5
cadCmtsCmStatusMacNumStartDhcpv6The number of modems on this mac domain in state startDhcpv6(12)rodeprecated
Integer32
.1.3.6.1.4.1.4998.1.1.20.2.26.1.6
cadCmtsCmStatusMacNumDhcpv4CompleteThe number of modems on this mac domain in state dhcpv4Complete(5)rodeprecated
Integer32
.1.3.6.1.4.1.4998.1.1.20.2.26.1.7
cadCmtsCmStatusMacNumDhcpv6CompleteThe number of modems on this mac domain in state dhcpv6Complete(13)rodeprecated
Integer32
.1.3.6.1.4.1.4998.1.1.20.2.26.1.8
cadCmtsCmStatusMacNumStartCfgFileDownloadThe number of modems on this mac domain in state startConfigFileDownload(14)rodeprecated
Integer32
.1.3.6.1.4.1.4998.1.1.20.2.26.1.9
cadCmtsCmStatusMacNumCfgFileDownloadCompleteThe number of modems on this mac domain in state configFileDownloadComplete(15)rodeprecated
Integer32
.1.3.6.1.4.1.4998.1.1.20.2.26.1.10
cadCmtsCmStatusMacNumStartRegistrationThe number of modems on this mac domain in state startRegistration(16)rodeprecated
Integer32
.1.3.6.1.4.1.4998.1.1.20.2.26.1.11
cadCmtsCmStatusMacNumRegistrationCompleteThe number of modems on this mac domain in state registrationComplete(6)rodeprecated
Integer32
.1.3.6.1.4.1.4998.1.1.20.2.26.1.12
cadCmtsCmStatusMacNumOperationalThe number of modems on this mac domain in state operational(8)rodeprecated
Integer32
.1.3.6.1.4.1.4998.1.1.20.2.26.1.13
cadCmtsCmStatusMacNumBpiInitThe number of modems on this mac domain in state bpiInit(9)rodeprecated
Integer32
.1.3.6.1.4.1.4998.1.1.20.2.26.1.14
cadCmtsCmStatusMacNumForwardingDisabledThe number of modems on this mac domain in state forwardingDisabled(17)rodeprecated
Integer32
.1.3.6.1.4.1.4998.1.1.20.2.26.1.15
cadCmtsCmStatusMacNumRfMuteAllThe number of modems on this mac domain in state rfMuteAll(18)rodeprecated
Integer32
.1.3.6.1.4.1.4998.1.1.20.2.26.1.16
cadCmtsCmStatusMacNumTotalThe total count of cable modems on this mac domainrodeprecated
Integer32
.1.3.6.1.4.1.4998.1.1.20.2.26.1.17
cadCmtsCmStatusMacNumRangingAbortedThe number of modems on this mac domain in state rangingAborted(3)rodeprecated
Integer32
.1.3.6.1.4.1.4998.1.1.20.2.26.1.18
cadCmtsCmStatusMacNumRangFlapsThe number of times a CM on this upstream channel has reset in Ranging states.rodeprecated
Integer32
.1.3.6.1.4.1.4998.1.1.20.2.26.1.19
cadCmtsCmStatusMacNumProvFlapsThe number of times a CM on this upstream channel has reset in Provisioning states.rodeprecated
Integer32
.1.3.6.1.4.1.4998.1.1.20.2.26.1.20
cadCmtsCmStatusMacNumRegFlapsThe number of times a CM on this upstream channel has reset in Registered state.rodeprecated
Integer32
.1.3.6.1.4.1.4998.1.1.20.2.26.1.21
cadCmtsCmStatusMacChSummaryTable
SEQUENCE OF CadCmtsCmStatusMacChSummaryEntry
.1.3.6.1.4.1.4998.1.1.20.2.27
cadCmtsCmStatusMacChSummaryEntry
CadCmtsCmStatusMacChSummaryEntry
.1.3.6.1.4.1.4998.1.1.20.2.27.1
cadCmtsCmStatusMacChNumOtherThe number of modems on this channel in state other(1)ro
Integer32
.1.3.6.1.4.1.4998.1.1.20.2.27.1.1
cadCmtsCmStatusMacChNumInitRangingThe number of modems on this channel in state initialRanging(2)ro
Integer32
.1.3.6.1.4.1.4998.1.1.20.2.27.1.2
cadCmtsCmStatusMacChNumRangingCompleteThe number of modems on this channel in state rangingAutoAdjComplete(4)ro
Integer32
.1.3.6.1.4.1.4998.1.1.20.2.27.1.3
cadCmtsCmStatusMacChNumStartEaeThe number of modems on this channel in state startEae(10)ro
Integer32
.1.3.6.1.4.1.4998.1.1.20.2.27.1.4
cadCmtsCmStatusMacChNumStartDhcpv4The number of modems on this channel in state startDhcpv4(11)ro
Integer32
.1.3.6.1.4.1.4998.1.1.20.2.27.1.5
cadCmtsCmStatusMacChNumStartDhcpv6The number of modems on this channel in state startDhcpv6(12)ro
Integer32
.1.3.6.1.4.1.4998.1.1.20.2.27.1.6
cadCmtsCmStatusMacChNumDhcpv4CompleteThe number of modems on this channel in state dhcpv4Complete(5)ro
Integer32
.1.3.6.1.4.1.4998.1.1.20.2.27.1.7
cadCmtsCmStatusMacChNumDhcpv6CompleteThe number of modems on this channel in state dhcpv6Complete(13)ro
Integer32
.1.3.6.1.4.1.4998.1.1.20.2.27.1.8
cadCmtsCmStatusMacChNumStartCfgFileDownloadThe number of modems on this channel in state startConfigFileDownload(14)ro
Integer32
.1.3.6.1.4.1.4998.1.1.20.2.27.1.9
cadCmtsCmStatusMacChNumCfgFileDownloadCompleteThe number of modems on this channel in state configFileDownloadComplete(15)ro
Integer32
.1.3.6.1.4.1.4998.1.1.20.2.27.1.10
cadCmtsCmStatusMacChNumStartRegistrationThe number of modems on this channel in state startRegistration(16)ro
Integer32
.1.3.6.1.4.1.4998.1.1.20.2.27.1.11
cadCmtsCmStatusMacChNumRegistrationCompleteThe number of modems on this channel in state registrationComplete(6)ro
Integer32
.1.3.6.1.4.1.4998.1.1.20.2.27.1.12
cadCmtsCmStatusMacChNumOperationalThe number of modems on this channel in state operational(8)ro
Integer32
.1.3.6.1.4.1.4998.1.1.20.2.27.1.13
cadCmtsCmStatusMacChNumBpiInitThe number of modems on this channel in state bpiInit(9)ro
Integer32
.1.3.6.1.4.1.4998.1.1.20.2.27.1.14
cadCmtsCmStatusMacChNumForwardingDisabledThe number of modems on this channel in state forwardingDisabled(17)ro
Integer32
.1.3.6.1.4.1.4998.1.1.20.2.27.1.15
cadCmtsCmStatusMacChNumRfMuteAllThe number of modems on this channel in state rfMuteAll(18)ro
Integer32
.1.3.6.1.4.1.4998.1.1.20.2.27.1.16
cadCmtsCmStatusMacChNumTotalThe total count of cable modems on this channelro
Integer32
.1.3.6.1.4.1.4998.1.1.20.2.27.1.17
cadCmtsCmStatusMacChNumRangingAbortedThe number of modems on this channel in state rangingAborted(3)ro
Integer32
.1.3.6.1.4.1.4998.1.1.20.2.27.1.18
cadCmtsCmStatusMacChNumRangFlapsThe number of times a CM on this upstream channel has reset in Ranging states.ro
Integer32
.1.3.6.1.4.1.4998.1.1.20.2.27.1.19
cadCmtsCmStatusMacChNumProvFlapsThe number of times a CM on this upstream channel has reset in Provisioning states.ro
Integer32
.1.3.6.1.4.1.4998.1.1.20.2.27.1.20
cadCmtsCmStatusMacChNumRegFlapsThe number of times a CM on this upstream channel has reset in Registered state.ro
Integer32
.1.3.6.1.4.1.4998.1.1.20.2.27.1.21
cadQosServiceFlowSidClusterTableThis object defines the SID clusters associated with an upstream service flow.
SEQUENCE OF CadQosServiceFlowSidClusterEntry
.1.3.6.1.4.1.4998.1.1.20.2.28
cadQosServiceFlowSidClusterEntryThe conceptual row of cadQosServiceFlowSidClusterTable. The ifIndex key corresponds to the MAC Domain interface of the service flow. The index scheme used upstream channel ifIndex intead of channel ID to speed up query performance.
CadQosServiceFlowSidClusterEntry
.1.3.6.1.4.1.4998.1.1.20.2.28.1
cadQosServiceFlowSidClusterChIfIndexThis key represents the upstream Channel ifIndex mapped to the corresponding SID.
InterfaceIndex (IF-MIB)
.1.3.6.1.4.1.4998.1.1.20.2.28.1.1
cadQosServiceFlowSidClusterUcidThis attribute represents the UCID assigned to the upstream channel in this SID Cluster.ro
Integer32
.1.3.6.1.4.1.4998.1.1.20.2.28.1.2
cadQosServiceFlowSidClusterSidThis attribute represents the SID assigned to the upstream channel in this SID Cluster.ro
Unsigned32
.1.3.6.1.4.1.4998.1.1.20.2.28.1.3
cadQosServiceFlowSegHdrThis object indicates the segment header in a MTCM enabled flow is on or off.ro
Enumeration
.1.3.6.1.4.1.4998.1.1.20.2.28.1.4
cadIfCmtsMacToInetIpTableThis table provides a SNMP style wrapper to the MAC DB with a direct translation from MAC to the IP address and CM MAC associated with the CM or CPE MAC.
SEQUENCE OF CadIfCmtsMacToInetIpEntry
.1.3.6.1.4.1.4998.1.1.20.2.29
cadIfCmtsMacToInetIpEntryPer MAC information stored in MAC DB
CadIfCmtsMacToInetIpEntry
.1.3.6.1.4.1.4998.1.1.20.2.29.1
cadIfCmtsMacToInetIpAddrTypeInet Ip address type (IPv4 or IPv6)associated with this CM or CPE MAC address.
InetAddressType (INET-ADDRESS-MIB)
.1.3.6.1.4.1.4998.1.1.20.2.29.1.1
cadIfCmtsMacToInetIpAddrInet Ip address (IPv4 or IPv6)associated with this CM or CPE MAC address.
InetAddressIPv4or6 (CADANT-TC)
.1.3.6.1.4.1.4998.1.1.20.2.29.1.2
cadIfCmtsMacToInetIpCmMacAddrMac address of the CM associated with the MAC address. If this is an entry for a CM, the it will be the same as the cadIfCmtsmac. For a CPE MAC, this will be the MAC address of the CM.ro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.4998.1.1.20.2.29.1.3
cadEnforceRule
OBJECT IDENTIFIER
.1.3.6.1.4.1.4998.1.1.20.2.30
cadEnforceRuleTableLastChangeThe value of sysUpTime on the most recent occasion at which a row in the cadEnforceRuleTable was added or deleted. Is zero if not modified since last boot.ro
Counter32 UNITS "seconds"
.1.3.6.1.4.1.4998.1.1.20.2.30.1
cadEnforceRuleTableThis object describes an enforce rule list For the Integrated SC Agility feature on a CMTS. Each object instance defines an enforce rule.
SEQUENCE OF CadEnforceRuleEntry
.1.3.6.1.4.1.4998.1.1.20.2.30.2
cadEnforceRuleEntryThe conceptual row of cadEnforceRuleTable.
CadEnforceRuleEntry
.1.3.6.1.4.1.4998.1.1.20.2.30.2.1
cadEnforceRuleReferenceSCNThis attribute represents the Service Class Name from which the reference parameter set values for a SF were derived. This ASCII string acts as a handle pointing to the Service Class Name In the docsQosParamSetTable. This SCN's name and pre-configured QoS parameters are used to determine if a particular Service Flow should be mapped into this particular Enforce Rule.
SnmpAdminString
.1.3.6.1.4.1.4998.1.1.20.2.30.2.1.1
cadEnforceRuleEnforceSCNThis attribute represents the Service Class Name from which the penalty parameter set values are derived. Must be specified. This ASCII string acts as a handle pointing to the Service Class Name In the docsQosParamSetTable. This SCN's pre-configured QoS parameters for Priority, Tmax, Tpeak, and Max Burst are used to temporarily over-write the service flow's QoS Parameter Set values whenever that service flow bandwidth exceeds the threshold.rw
SnmpAdminString
.1.3.6.1.4.1.4998.1.1.20.2.30.2.1.2
cadEnforceRuleAvgBwRateUsageTriggerThe threshold bandwidth (in kilobits per second) above which the service flow is identified as being a Heavy User below which the service flow is identified as being a Light User. This must be specified.rw
INTEGER
.1.3.6.1.4.1.4998.1.1.20.2.30.2.1.3
cadEnforceRuleAvgHistoryDurationThe duration of time (in minutes) that is used to monitor and calculate the average bandwidth for each service flow associated with this Enforce Rule. In essence, we will use a sliding window with a duration specified by this parameter whenever calculating the average bandwidth that the service flow has utilized. Values must be divisible by 30. The history duration must be an integer multiple of the sampling interval.rw
INTEGER
.1.3.6.1.4.1.4998.1.1.20.2.30.2.1.4
cadEnforceRuleSamplingIntervalThe period of time (in minutes) between successive slides of the sliding window. It is also the temporal distance over which the sliding window is moved whenever it is slid. The penalty duration and window duration must be an integer multiple of the sampling interval.rw
INTEGER (5|10|15|30) UNITS "minutes"
.1.3.6.1.4.1.4998.1.1.20.2.30.2.1.5
cadEnforceRulePenaltyDurationThe duration of time (in minutes) that a monitored service flow is held in the penalty box after it has been found to be a Heavy User. Being placed in the penalty box implies that the service flow has had its Priority, Tmax, Tpeak, and Max Burst parameters within its QoS Parameter Set overridden by the corresponding values from the Enforce Service Class Name. Values must be divisible by 30. The penalty duration must be an integer multiple of the sampling interval.rw
INTEGER
.1.3.6.1.4.1.4998.1.1.20.2.30.2.1.6
cadEnforceRuleCreateTimeThe value of sysUpTime in seconds when this rule was created. Set to new sysUpTime if created before last boot.ro
Counter32 UNITS "seconds"
.1.3.6.1.4.1.4998.1.1.20.2.30.2.1.7
cadEnforceRuleStatusThe conceptual row status of this object.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.4998.1.1.20.2.30.2.1.8
cadEnforceRuleCountsTableThis object contains the number of times an enforce rule has been used to penalize a service flow.
SEQUENCE OF CadEnforceRuleCountsEntry
.1.3.6.1.4.1.4998.1.1.20.2.30.3
cadEnforceRuleCountsEntryThe conceptual row of cadEnforceRuleCountsTable.
CadEnforceRuleCountsEntry
.1.3.6.1.4.1.4998.1.1.20.2.30.3.1
cadEnforceRuleCountsPenaltiesNumber of times the CM has had a SF penalized by this Enforce Rule.ro
Counter32
.1.3.6.1.4.1.4998.1.1.20.2.30.3.1.1
cadQosServiceClassControl
OBJECT IDENTIFIER
.1.3.6.1.4.1.4998.1.1.20.2.31
cadQosServiceClassControlTableThis table extends the docQosServiceClassTable and adds control features for service classes.
SEQUENCE OF CadQosServiceClassControlEntry
.1.3.6.1.4.1.4998.1.1.20.2.31.1
cadQosServiceClassControlEntryThis is an extension of the DocsQosServiceClassEntry table that provides additional service class control features.
CadQosServiceClassControlEntry
.1.3.6.1.4.1.4998.1.1.20.2.31.1.1
cadQosServiceClassControlSendDscThis variable always returns false(2) upon reading. When set to true(1), a DSC updating the SF parameters is sent to all CMs having a SF matching this SCN name and whose QOS parameter set is out-of-date.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4998.1.1.20.2.31.1.1.1
cadQosServiceClassControlSendDscLastUpdatedThe time that cadQosServiceClassControlSendDsc was written for this row. If it was updated prior to the last re- initialization of the local network management subsystem, then this object contains a zero value. Used to decide if a DSC is needed for a SF using this SCN.ro
TimeStamp (SNMPv2-TC)
.1.3.6.1.4.1.4998.1.1.20.2.31.1.1.2
cadQosServiceClassCmControlTableThis table extends the docQosServiceClassTable and adds a per-CM control feature for service classes.
SEQUENCE OF CadQosServiceClassCmControlEntry
.1.3.6.1.4.1.4998.1.1.20.2.31.2
cadQosServiceClassCmControlEntryThis is an extension of the DocsQosServiceClassEntry table that provides additional service class control features.
CadQosServiceClassCmControlEntry
.1.3.6.1.4.1.4998.1.1.20.2.31.2.1
cadQosServiceClassCmControlSendDscMacAddrThis variable always returns 00:00:00:00:00:00 upon reading. When set to any other value, a DSC updating the SF parameters in the CM whose MAC address matches the value written is sent, providing that there is a SF matching this SCN's name, and the CM's QoS parameter set for that SF is out-of-date.rw
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.4998.1.1.20.2.31.2.1.1
cadIfCmtsCmOfdmStatusTableThis table contains DOCSIS 3.1 CM Capabilities from CM registration requests.
SEQUENCE OF CadIfCmtsCmOfdmStatusEntry
.1.3.6.1.4.1.4998.1.1.20.2.32
cadIfCmtsCmOfdmStatusEntryAn entry has the capabilities from the registration request for one CM.
CadIfCmtsCmOfdmStatusEntry
.1.3.6.1.4.1.4998.1.1.20.2.32.1
cadIfCmtsCmOfdmStatusMacAddressThe MAC address of the modem.
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.4998.1.1.20.2.32.1.1
cadIfCmtsCmOfdmStatusOkOfdmModThe OFDM modulations supported by the CM, as reported in TLV 5.52. QAM8 and QAM32 are not allowed for DS channels.ro
CerOfdmModBitsType (CADANT-CMTS-DOWNCHANNEL-MIB)
.1.3.6.1.4.1.4998.1.1.20.2.32.1.2
cadIfCmtsCmOfdmStatusOkOfdmaModThe OFDMA US modulations supported by the CM, as reported in TLV 5.53.ro
CerOfdmModBitsType (CADANT-CMTS-DOWNCHANNEL-MIB)
.1.3.6.1.4.1.4998.1.1.20.2.32.1.3
cadIfCmtsCmOfdmStatusDsLowFreqThe low DS edge frequency (Downstream Lower Band Edge) supported by the CM,as reported in TLV 5.54.ro
Integer32
.1.3.6.1.4.1.4998.1.1.20.2.32.1.4
cadIfCmtsCmOfdmStatusDsHighFreqThe high DS edge frequency (Downstream Upper Band Edge) supported by the CM, as reported in TLV 5.55.ro
Integer32
.1.3.6.1.4.1.4998.1.1.20.2.32.1.5
cadIfCmtsCmOfdmStatusUsHighFreqThe high US edge frequency (Diplexor Upper Band Edge) supported by the CM,as reported in TLV 5.56.ro
Integer32
.1.3.6.1.4.1.4998.1.1.20.2.32.1.6
cadIfCmtsCmOfdmProfTableThis table contains the OFDM and OFDMA channels and profiles assigned to DOCSIS 3.1 CMs, and their status.
SEQUENCE OF CadIfCmtsCmOfdmProfEntry
.1.3.6.1.4.1.4998.1.1.20.2.33
cadIfCmtsCmOfdmProfEntryAn entry describes one channel and profile assigned to a DOCSIS 3.1 CM.
CadIfCmtsCmOfdmProfEntry
.1.3.6.1.4.1.4998.1.1.20.2.33.1
cadIfCmtsCmOfdmProfMacAddressThe MAC address of the modem.
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.4998.1.1.20.2.33.1.1
cadIfCmtsCmOfdmProfIfIndexThe ifIndex of an OFDM DS or OFDMA US channel.
InterfaceIndex (IF-MIB)
.1.3.6.1.4.1.4998.1.1.20.2.33.1.2
cadIfCmtsCmOfdmProfProfIdThe profile number plus one of this profile for a DS channel. The data IUC number for a US channel. Range is (1..16|256) for downstream channels, and (5|6|9|10|11|12|13) for upstream channels.
OfdmProfileId (CADANT-CMTS-DOWNCHANNEL-MIB)
.1.3.6.1.4.1.4998.1.1.20.2.33.1.3
cadIfCmtsCmOfdmProfDirectionWhether the channel is downstream or upstream.ro
IfDirection (DOCS-IF3-MIB)
.1.3.6.1.4.1.4998.1.1.20.2.33.1.4
cadIfCmtsCmOfdmProfStatusActive if there are no issues for this profile for this CM on this channel. Impaired when we receive a CM-STATUS message of type ofdmProfileFailure, for OFDM channels, or due to excessive errors seen by the receiver, for OFDMA channels.rw
Enumeration
.1.3.6.1.4.1.4998.1.1.20.2.33.1.5
cadSubmgtFilterGrpDescTableEach entry of this table defines the description text associated with a single subscriber management filter group. The object exists independent of the existence of the particular filter group (docsSubmgt3FilterGrpTable (DOCS-SUBMGT3-MIB))
SEQUENCE OF CadSubmgtFilterGrpDescEntry
.1.3.6.1.4.1.4998.1.1.20.2.34
cadSubmgtFilterGrpDescEntryThe conceptual row of cadSubmgtFilterGrpDescTable.
CadSubmgtFilterGrpDescEntry
.1.3.6.1.4.1.4998.1.1.20.2.34.1
cadSubmgtFilterGrpIdThis key is an identifier for a set of classifiers known as a filter group. Each CM may be associated with several filter groups for its upstream and downstream traffic, one group per target end point on the CM as defined in the docsSubmgt3GrpEntry object (DOCS-SUBMGT3-MIB). Typically, many CMs share a common set of filter groups.
Unsigned32
.1.3.6.1.4.1.4998.1.1.20.2.34.1.1
cadSubmgtFilterGrpDescriptionA user-defined description of the filter group (1 to 32 human- readable characters).rw
SnmpAdminString
.1.3.6.1.4.1.4998.1.1.20.2.34.1.2
cadSubmgtFilterGrpRowStatusControl object for row creation and deletion. Support limited to active(1), createAndGo(4), destroy(6).rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.4998.1.1.20.2.34.1.3