DOCS-IF3-MIB
AI MIB Summary
The DOCS-IF3-MIB enables monitoring of DOCSIS 3.0 cable modem termination systems (CMTS) and cable modems by tracking channel bonding configurations, interface topology states, and physical layer signal quality metrics such as SNR margins and error counts.
This MIB module contains the management objects for the management of DOCSIS 3.0 features, primarly channel bonding, interface topology and enhanced signal quality montoring. Copyright 1999-2008 Cable Television Laboratories, Inc. All rights reserved.
Main OID:
docsIf3Mib.1.3.6.1.4.1.4491.2.1.20
216
Objects
Active
Status
12
Dependencies
Imported Objects
Objects
216 total| Object Name |
|---|
docsIf3MibThis MIB module contains the management objects for the
management of DOCSIS 3.0 features, primarly channel bonding,
interface topology and enhanced signal quality montoring.
Copyright 1999-2008 Cable Television Laboratories, Inc.
All rights reserved. MODULE-IDENTITY .1.3.6.1.4.1.4491.2.1.20 |
IMPORTSThis MIB module contains the management objects for the
management of DOCSIS 3.0 features, primarly channel bonding,
interface topology and enhanced signal quality montoring.
Copyright 1999-2008 Cable Television Laboratories, Inc.
All rights reserved. NOTIFICATION-TYPE .1.3.6.1.4.1.4491.2.1.20 |
docsIf3Notifications OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.1.20.0 |
docsIf3CmtsEventNotifA notification to report a DOCSIS event detected on the
CMTS.
This notification includes the following information:
- docsDevEvLevel: the DOCSIS priority level associated with
the event.
- docsDevEvId: the numeric identifier of the event.
- docsDevEvText: The text description of the event.
- docsDevEvLastTime: The local date and time when this event
was generated.
- sysName: the administratively-assigned name of the CMTS.
e.g. The fully-qualified domain name as indicated in RFC 3418
or in the absence the IP address of the CMTS administrative
interface in dot '.' notation for IPv4 and colon ':' notation
for and IPv6 Address as indicated in RFC 3164 NOTIFICATION-TYPE .1.3.6.1.4.1.4491.2.1.20.0.1 |
docsIf3CmEventNotifA notification to report a DOCSIS event detected on the
CM.
This notification includes the following information:
- docsDevEvLevel: the priority level associated with the
event.
- docsDevEvId: the unique identifier of the event that
occurred.
- docsDevEvText: a textual description of the event.
- docsDevEvLastTime: The local date and time when this event
was generated. NOTIFICATION-TYPE .1.3.6.1.4.1.4491.2.1.20.0.2 |
docsIf3MibObjects OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.1.20.1 |
docsIf3CmStatusTableThis object defines attributes of the CM connectivity
status.This object provides CM connectivity status
information of the CM previously available in
the SNMP table docsIfCmStatusTable. SEQUENCE OF DocsIf3CmStatusEntry .1.3.6.1.4.1.4491.2.1.20.1.1 |
docsIf3CmStatusEntryThe conceptual row of docsIf3CmStatusTable.
An instance exist for the CM MAC Domain Interface. DocsIf3CmStatusEntry .1.3.6.1.4.1.4491.2.1.20.1.1.1 |
docsIf3CmStatusValueThis attribute denotes the current CM connectivity
state. For the case of IP acquisition related states,
this attribute reflects states for the current CM
provisioning mode, not the other DHCP process associated
with dual stack operation.ro CmRegState .1.3.6.1.4.1.4491.2.1.20.1.1.1.1 |
docsIf3CmStatusCodeThis attribute denotes the status code for CM as defined
in the OSSI Specification. The status code consists
of a single character indicating error groups,
followed by a two- or three-digit number indicating
the status condition, followed by a decimal. An example
of a returned value could be 'T101.0'. The zero-length
hex string indicates no status code yet registered.ro OCTET STRING .1.3.6.1.4.1.4491.2.1.20.1.1.1.2 |
docsIf3CmStatusResetsThis attribute denotes the number of times the CM reset
or initialized this interface. Discontinuities
in the value of this counter can occur at re-initialization
of the managed system, and at other times as
indicated by the value of ifCounterDiscontinuityTime
for the CM MAC Domain interface.ro Counter32 UNITS "resets" .1.3.6.1.4.1.4491.2.1.20.1.1.1.3 |
docsIf3CmStatusLostSyncsThis attribute denotes the number of times the CM lost
synchronization with the downstream channel. Discontinuities
in the value of this counter can occur
at re-initialization of the managed system, and at
other times as indicated by the value of
ifCounterDiscontinuityTime for the CM MAC Domain interface.ro Counter32 UNITS "messages" .1.3.6.1.4.1.4491.2.1.20.1.1.1.4 |
docsIf3CmStatusInvalidMapsThis attribute denotes the number of times the CM received
invalid MAP messages. Discontinuities in the
value of this counter can occur at re-initialization
of the managed system, and at other times as indicated
by the value of ifCounterDiscontinuityTime for
the CM MAC Domain interface.ro Counter32 UNITS "maps" .1.3.6.1.4.1.4491.2.1.20.1.1.1.5 |
docsIf3CmStatusInvalidUcdsThis attribute denotes the number of times the CM received
invalid UCD messages. Discontinuities in the
value of this counter can occur at re-initialization
of the managed system, and at other times as indicated
by the value of ifCounterDiscontinuityTime for
the CM MAC Domain interface.ro Counter32 UNITS "messages" .1.3.6.1.4.1.4491.2.1.20.1.1.1.6 |
docsIf3CmStatusInvalidRangingRspsThis attribute denotes the number of times the CM received
invalid ranging response messages. Discontinuities
in the value of this counter can occur at re-initialization
of the managed system, and at other
times as indicated by the value of ifCounterDiscontinuityTime
for the CM MAC Domain interface.ro Counter32 UNITS "messages" .1.3.6.1.4.1.4491.2.1.20.1.1.1.7 |
docsIf3CmStatusInvalidRegRspsThis attribute denotes the number of times the CM received
invalid registration response messages. Discontinuities
in the value of this counter can occur
at re-initialization of the managed system, and at
other times as indicated by the value of
ifCounterDiscontinuityTime for the CM MAC Domain interface.ro Counter32 UNITS "messages" .1.3.6.1.4.1.4491.2.1.20.1.1.1.8 |
docsIf3CmStatusT1TimeoutsThis attribute denotes the number of times counter
T1 expired in the CM. Discontinuities in the value of
this counter can occur at re-initialization of the
managed system, and at other times as indicated by the
value of ifCounterDiscontinuityTime for the CM MAC
Domain interface.ro Counter32 UNITS "timeouts" .1.3.6.1.4.1.4491.2.1.20.1.1.1.9 |
docsIf3CmStatusT2TimeoutsThis attribute denotes the number of times counter
T2 expired in the CM. Discontinuities in the value of
this counter can occur at re-initialization of the
managed system, and at other times as indicated by the
value of ifCounterDiscontinuityTime for the CM MAC
Domain interface.ro Counter32 UNITS "timeouts" .1.3.6.1.4.1.4491.2.1.20.1.1.1.10 |
docsIf3CmStatusUCCsSuccessesThis attribute denotes the number of successful Upstream
Channel Change transactions. Discontinuities
in the value of this counter can occur at re-initialization
of the managed system, and at other times
as indicated by the value of ifCounterDiscontinuityTime
for the CM MAC Domain interface.ro Counter32 UNITS "attempts" .1.3.6.1.4.1.4491.2.1.20.1.1.1.11 |
docsIf3CmStatusUCCFailsThis attribute denotes the number of failed Upstream
Channel Change transactions. Discontinuities
in the value of this counter can occur at re-initialization
of the managed system, and at other times as indicated
by the value of ifCounterDiscontinuityTime
for the CM MAC Domain interface.ro Counter32 UNITS "attempts" .1.3.6.1.4.1.4491.2.1.20.1.1.1.12 |
docsIf3CmStatusUsTableThis object defines PHY and MAC information about
the CM's upstream channels operating in Multiple Transmit
Channel (MTC) mode or in a Pre-3.0 DOSCIS transmit
channel mode. This object provides per-CM Upstream
channel information previously available in the
SNMP table docsIfCmStatusTable. SEQUENCE OF DocsIf3CmStatusUsEntry .1.3.6.1.4.1.4491.2.1.20.1.2 |
docsIf3CmStatusUsEntryThe conceptual row of docsIf3CmStatusUsTable.
An instance exist for the CM upstream channels configured for
data transmission. DocsIf3CmStatusUsEntry .1.3.6.1.4.1.4491.2.1.20.1.2.1 |
docsIf3CmStatusUsTxPowerThis attribute represents the operational CM transmit
power for this upstream channel.ro TenthdBmV UNITS "TenthdBmV" .1.3.6.1.4.1.4491.2.1.20.1.2.1.1 |
docsIf3CmStatusUsT3TimeoutsThis attribute denotes the number of times counter
T3 expired in the CM for this upstream channel. Discontinuities
in the value of this counter can occur at
re-initialization of the managed system, and at other
times as indicated by the value of ifCounterDiscontinuityTime
for the associated upstream channel.ro Counter32 UNITS "timeouts" .1.3.6.1.4.1.4491.2.1.20.1.2.1.2 |
docsIf3CmStatusUsT4TimeoutsThis attribute denotes the number of times counter
T4 expired in the CM for this upstream channel. Discontinuities
in the value of this counter can occur at
re-initialization of the managed system, and at other
times as indicated by the value of ifCounterDiscontinuityTime
for the associated upstream channel.ro Counter32 UNITS "timeouts" .1.3.6.1.4.1.4491.2.1.20.1.2.1.3 |
docsIf3CmStatusUsRangingAbortedsThis attribute denotes the number of times the ranging
process was aborted by the CMTS. Discontinuities
in the value of this counter can occur at re-initialization
of the managed system, and at other times as
indicated by the value of ifCounterDiscontinuityTime
([RFC2863]) for the associated upstream channel.ro Counter32 UNITS "attempts" .1.3.6.1.4.1.4491.2.1.20.1.2.1.4 |
docsIf3CmStatusUsModulationTypeThis attribute indicates modulation type status
currently used by the CM for this upstream channel. Since
this object specifically identifies PHY Layer
mode, the shared upstream channel type 'tdmaAndAtdma'
is not permitted.ro DocsisUpstreamType .1.3.6.1.4.1.4491.2.1.20.1.2.1.5 |
docsIf3CmStatusUsEqDataThis attribute indicates the pre-equalization data
for the specified upstream Channel on this CM after
convolution with data indicated in the RNG-RSP. This
data is valid when docsIfUpChannelPreEqEnable
RFC 4546 is set to true.ro DocsEqualizerData .1.3.6.1.4.1.4491.2.1.20.1.2.1.6 |
docsIf3CmStatusUsT3ExceededsThis attribute denotes the number of times for excessive
T3 timeouts. Discontinuities in the value of
this counter can occur at re-initialization of the managed
system, and at other times as indicated by the
value of ifCounterDiscontinuityTime for the associated
upstream channel.ro Counter32 UNITS "timeouts" .1.3.6.1.4.1.4491.2.1.20.1.2.1.7 |
docsIf3CmStatusUsIsMutedThis attribute denotes whether the upstream
channel is muted.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4491.2.1.20.1.2.1.8 |
docsIf3CmStatusUsRangingStatusThis attribute denotes the ranging state of the CM.ro RangingState .1.3.6.1.4.1.4491.2.1.20.1.2.1.9 |
docsIf3CmtsCmRegStatusTableThis object defines attributes that represent the CM's
registration status as tracked by the CMTS. SEQUENCE OF DocsIf3CmtsCmRegStatusEntry .1.3.6.1.4.1.4491.2.1.20.1.3 |
docsIf3CmtsCmRegStatusEntryThe conceptual row of docsIf3CmtsCmRegStatusTable. DocsIf3CmtsCmRegStatusEntry .1.3.6.1.4.1.4491.2.1.20.1.3.1 |
docsIf3CmtsCmRegStatusIdThis attribute uniquely identifies a CM. The CMTS
must assign a single id value for each CM MAC address seen
by the CMTS. The CMTS should ensure that the association
between an Id and MAC Address remains constant
during CMTS uptime. Unsigned32 .1.3.6.1.4.1.4491.2.1.20.1.3.1.1 |
docsIf3CmtsCmRegStatusMacAddrThis attribute represents the MAC address of the CM.
If the CM has multiple MAC addresses, this is the MAC
address associated with the MAC Domain interface.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.4491.2.1.20.1.3.1.2 |
docsIf3CmtsCmRegStatusIPv6AddrThis attribute represents the IPv6 address of the
CM. If the CM has no Internet address assigned, or the
Internet address is unknown, the value of this attribute
is the all zeros address.ro InetAddressIPv6 (INET-ADDRESS-MIB) .1.3.6.1.4.1.4491.2.1.20.1.3.1.3 |
docsIf3CmtsCmRegStatusIPv6LinkLocalThis attribute represents the IPv6 local scope address
of the CM. If the CM has no link local address assigned,
or the Internet address is unknown, the value
of this attribute is the all zeros address.ro InetAddressIPv6 (INET-ADDRESS-MIB) .1.3.6.1.4.1.4491.2.1.20.1.3.1.4 |
docsIf3CmtsCmRegStatusIPv4AddrThis attribute represents the IPv4 address of this
CM. If the CM has no IP address assigned, or the IP address
is unknown, this object returns 0.0.0.0.ro InetAddressIPv4 (INET-ADDRESS-MIB) .1.3.6.1.4.1.4491.2.1.20.1.3.1.5 |
docsIf3CmtsCmRegStatusValueThis attribute represents the current CM connectivity
state.ro CmtsCmRegState .1.3.6.1.4.1.4491.2.1.20.1.3.1.6 |
docsIf3CmtsCmRegStatusMdIfIndexThis attribute represents the interface Index of
the CMTS MAC Domain where the CM is active. If the interface
is unknown, the CMTS returns a value of zero.ro InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.4491.2.1.20.1.3.1.7 |
docsIf3CmtsCmRegStatusMdCmSgIdThis attribute represents the ID of the MAC Domain
CM Service Group Id (MD-CM-SG-ID) in which the CM is registered.
If the ID is unknown, the CMTS returns a value
of zero.ro Unsigned32 .1.3.6.1.4.1.4491.2.1.20.1.3.1.8 |
docsIf3CmtsCmRegStatusRcpIdThis attribute represents the RCP-ID associated
with the CM. If the RCP-ID is unknown the CMTS returns
a five octet long string of zeros.ro RcpId .1.3.6.1.4.1.4491.2.1.20.1.3.1.9 |
docsIf3CmtsCmRegStatusRccStatusIdThis attribute represents the RCC Id the CMTS used
to configure the CM receive channel set during the registration
process. If unknown, the CMTS returns the
value zero.ro Unsigned32 .1.3.6.1.4.1.4491.2.1.20.1.3.1.10 |
docsIf3CmtsCmRegStatusRcsIdThis attribute represents the Receive Channel Set
(RCS) that the CM is currently using. If the RCS is unknown,
the CMTS returns the value zero.ro ChSetId .1.3.6.1.4.1.4491.2.1.20.1.3.1.11 |
docsIf3CmtsCmRegStatusTcsIdThis attribute represents Transmit Channel Set (TCS)
the CM is currently using. If the TCS is unknown,
the CMTS returns the value zero.ro ChSetId .1.3.6.1.4.1.4491.2.1.20.1.3.1.12 |
docsIf3CmtsCmRegStatusQosVersionThis attribute denotes the queuing services the CM
registered, either DOCSIS 1.1 QoS or DOCSIS 1.0 CoS mode.ro DocsisQosVersion .1.3.6.1.4.1.4491.2.1.20.1.3.1.13 |
docsIf3CmtsCmRegStatusLastRegTimeThis attribute represents the last time the CM registered.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.4491.2.1.20.1.3.1.14 |
docsIf3CmtsCmRegStatusAddrResolutionReqsThis attribute counts represents the number of upstream
packets received on the SIDs assigned to a CM that
are any of the following:
Upstream IPv4 ARP Requests
Upstream IPv6 Neighbor Solicitation Requests
(For routing CMTSs) Upstream IPv4 or IPv6 packets to
unresolved destinations in locally connected downstream
subnets in the HFC.
Discontinuities in the value of this counter can occur
at re-initialization of the managed system, and at
other times as indicated by the value of
ifCounterDiscontinuityTime for the associated MAC Domain
interface.ro Counter32 .1.3.6.1.4.1.4491.2.1.20.1.3.1.15 |
docsIf3CmtsCmUsStatusTableThis object defines status information of the CM
currently in use Upstream Logical Channels, as reported
by the CMTS. SEQUENCE OF DocsIf3CmtsCmUsStatusEntry .1.3.6.1.4.1.4491.2.1.20.1.4 |
docsIf3CmtsCmUsStatusEntryThe conceptual row of docsIf3CmtsCmUsStatusTable. DocsIf3CmtsCmUsStatusEntry .1.3.6.1.4.1.4491.2.1.20.1.4.1 |
docsIf3CmtsCmUsStatusChIfIndexThis attribute is a key that represents the ifIndex
of the upstream interface. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4491.2.1.20.1.4.1.1 |
docsIf3CmtsCmUsStatusModulationTypeThis attribute represents the modulation type currently
used by this upstream channel.ro DocsisUpstreamType .1.3.6.1.4.1.4491.2.1.20.1.4.1.2 |
docsIf3CmtsCmUsStatusRxPowerThis attribute represents the receive power of this
upstream channel.ro TenthdBmV UNITS "TenthdBmV" .1.3.6.1.4.1.4491.2.1.20.1.4.1.3 |
docsIf3CmtsCmUsStatusSignalNoiseThis attribute represents Signal/Noise ratio as
perceived for upstream data from the CM on this upstream
channel.ro TenthdB UNITS "TenthdB" .1.3.6.1.4.1.4491.2.1.20.1.4.1.4 |
docsIf3CmtsCmUsStatusMicroreflectionsThis attribute represents microreflections received
on this upstream channel.ro Unsigned32 .1.3.6.1.4.1.4491.2.1.20.1.4.1.5 |
docsIf3CmtsCmUsStatusEqDataThis attribute represents the equalization data
for the CM on this upstream channel.ro DocsEqualizerData .1.3.6.1.4.1.4491.2.1.20.1.4.1.6 |
docsIf3CmtsCmUsStatusUnerroredsThis attribute represents the codewords received
without error from the CM on this interface. Discontinuities
in the value of this counter can occur at re-initialization
of the managed system, and at other
times as indicated by the value of ifCounterDiscontinuityTime
for the associated upstream channel.ro Counter32 .1.3.6.1.4.1.4491.2.1.20.1.4.1.7 |
docsIf3CmtsCmUsStatusCorrectedsThis attribute represents the codewords received
with correctable errors from the CM on this upstream
channeli. Discontinuities in the value of this counter
can occur at re-initialization of the managed system,
and at other times as indicated by the value of
ifCounterDiscontinuityTime for the associated upstream
channel.ro Counter32 .1.3.6.1.4.1.4491.2.1.20.1.4.1.8 |
docsIf3CmtsCmUsStatusUncorrectablesThis attribute represents the codewords received
with uncorrectable errors from the CM on this upstream
channel. Discontinuities in the value of this counter
can occur at re-initialization of the managed
system, and at other times as indicated by the value of
ifCounterDiscontinuityTime for the associated upstream
channel.ro Counter32 .1.3.6.1.4.1.4491.2.1.20.1.4.1.9 |
docsIf3CmtsCmUsStatusHighResolutionTimingOffsetThis attribute represents the current measured round
trip time on this CM's upstream channel in units
of (6.25 microseconds/(64*256)). This attribute returns
zero if the value is unknown.ro Integer32 UNITS "time tick/(64*256)" .1.3.6.1.4.1.4491.2.1.20.1.4.1.10 |
docsIf3CmtsCmUsStatusIsMutedThis attribute has a value 'true' to indicate that
the CM's upstream channel has been muted via
CM-CTRL-REQ/CM-CTRL-RSP message exchange.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4491.2.1.20.1.4.1.11 |
docsIf3CmtsCmUsStatusRangingStatusThis attribute denotes the ranging state of the CM.ro RangingState .1.3.6.1.4.1.4491.2.1.20.1.4.1.12 |
docsIf3MdChCfgTableThis object configures the association of downstream
and upstream channels to a particular MAC Domain
(MD) on a CMTS. The creation of channels and MAC domain
object interface instances is vendor-specific.
In particular, the assignment of the channel interface
index is normally vendor-specific. Therefore,
this object is intended only for associating channels
to a MAC Domain and assumes that those channels were
previously configured.
The CMTS may have restrictions on which channels can
be configured in the same MAC Domain. For example, it
could require the upstream channels to be from the same
line card.
This object supports the creation and deletion of multiple
instances.
Creation of a new instance of this object requires the
ChId attribute to be set. SEQUENCE OF DocsIf3MdChCfgEntry .1.3.6.1.4.1.4491.2.1.20.1.5 |
docsIf3MdChCfgEntryThe conceptual row of docsIf3MdChCfgTable.
The ifIndex key corresponds to the MAC Domain interface
where the channel is configured.
The CMTS persists all instances of MdChCfg across
reinitializations. DocsIf3MdChCfgEntry .1.3.6.1.4.1.4491.2.1.20.1.5.1 |
docsIf3MdChCfgChIfIndexThis key represents the interface index of an existing
upstream or downstream channel that is configured
to be part of the MAC Domain.
For the case of upstream interfaces the CMTS could reject
the assignment of upstream logical channels under
the same physical upstream interface to different
MAC Domains. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4491.2.1.20.1.5.1.1 |
docsIf3MdChCfgIsPriCapableDsIf set to 'true', this attribute configures the downstream
channel as Primary-Capable.
The default value for a downstream channel is 'true'.
This attribute is not relevant for upstream interfaces,
therefore it reports the value 'false' for such interfaces.
A CMTS may restrict the permitted value of this attribute
based upon physical channel capabilities.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4491.2.1.20.1.5.1.2 |
docsIf3MdChCfgChIdThis attribute contains the 8-bit Downstream Channel
ID (DCID) or Upstream Channel ID (UCID) configured
for the channel in the MAC Domain.rw ChId .1.3.6.1.4.1.4491.2.1.20.1.5.1.3 |
docsIf3MdChCfgSfProvAttrMaskThis attribute contains Provisioned Attribute Mask
of non-bonded service flow assignment to this channel.rw AttributeMask .1.3.6.1.4.1.4491.2.1.20.1.5.1.4 |
docsIf3MdChCfgRowStatusThe status of this instance.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4491.2.1.20.1.5.1.5 |
docsIf3RccCfgTableThis object identifies the scope of the Receive Channel
Configuration (RCC) and provides a top level container
for the Receive Module and Receive Channel
objects. The CMTS selects an instance of this object
to assign to a CM when it registers.
This object supports the creation and deletion of multiple
instances. SEQUENCE OF DocsIf3RccCfgEntry .1.3.6.1.4.1.4491.2.1.20.1.6 |
docsIf3RccCfgEntryThe conceptual row of docsIf3RccCfgTable.
The ifIndex key corresponds to the MAC Domain interface
where the RCC is configured.
The CMTS persists all instances of RccCfg across
reinitializations. DocsIf3RccCfgEntry .1.3.6.1.4.1.4491.2.1.20.1.6.1 |
docsIf3RccCfgRcpIdThis key represents the 'Receive Channel Profile
Identifier' (RCP-ID) configured for the MAC Domain
indicated by this instance. RcpId .1.3.6.1.4.1.4491.2.1.20.1.6.1.1 |
docsIf3RccCfgRccCfgIdThis key denotes an RCC combination assignment for
a particular RcpId and is unique per combination of
MAC Domain and RcpId. Unsigned32 .1.3.6.1.4.1.4491.2.1.20.1.6.1.2 |
docsIf3RccCfgVendorSpecificThis attribute contains vendor-specific information
of the CM Receive Channel configuration.rw OCTET STRING .1.3.6.1.4.1.4491.2.1.20.1.6.1.3 |
docsIf3RccCfgDescriptionThis attribute contains a human-readable description
of the CM RCP Configuration.rw SnmpAdminString .1.3.6.1.4.1.4491.2.1.20.1.6.1.4 |
docsIf3RccCfgRowStatusThe status of this instance.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4491.2.1.20.1.6.1.5 |
docsIf3RccStatusTableThe RCC Status object provides a read-only view of
the statically-configured (from the RccCfg object)
and dynamically-created RCCs.
The CMTS creates an RCC Status instance for each unique
MAC Domain Cable Modem Service Group (MD-CM-SG) to
which it signals an RCC to the CM. SEQUENCE OF DocsIf3RccStatusEntry .1.3.6.1.4.1.4491.2.1.20.1.7 |
docsIf3RccStatusEntryThe conceptual row of docsIf3RccStatusTable.
The ifIndex key corresponds to the MAC Domain interface
where the RCC is configured. DocsIf3RccStatusEntry .1.3.6.1.4.1.4491.2.1.20.1.7.1 |
docsIf3RccStatusRcpIdThis key represents the RCP-ID to which this instance
applies. RcpId .1.3.6.1.4.1.4491.2.1.20.1.7.1.1 |
docsIf3RccStatusRccStatusIdThis key represents an RCC combination for a particular
RcpId either from an RCC configuration object
or a CMTS-determined RCC and is unique per combination
of MAC Domain IfIndex and RcpId. Unsigned32 .1.3.6.1.4.1.4491.2.1.20.1.7.1.2 |
docsIf3RccStatusRccCfgIdThis attribute identifies an RCC-Configured combination
from which this instance was defined. If nonzero,
it corresponds to the RccCfg instance from which
the RCC was created. Zero means that the RCC was dynamically
created by the CMTS.ro Unsigned32 .1.3.6.1.4.1.4491.2.1.20.1.7.1.3 |
docsIf3RccStatusValidityCodeThis attribute indicates whether the RCC instance
of this object is valid or not. An RCC Status instance
from a configured or a dynamic RCC could become invalid,
for example, due changes in the topology.ro Enumeration .1.3.6.1.4.1.4491.2.1.20.1.7.1.4 |
docsIf3RccStatusValidityCodeTextThis attribute contains the CMTS vendor-specific
log information from the Receive Channel Configuration
Status encoding.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.4491.2.1.20.1.7.1.5 |
docsIf3RxChCfgTableThe Receive Channel Configuration object permits
an operator to configure how CMs registered with certain
Receive Channel Profiles will configure the Receive
Channels within their profile. When a CM registers
with an RCP for which all Receive Channel Indices
(RcIds) are configured in the Receive Module object
and all Receive Channels are configured within this
object, the CMTS should use the configuration within
these objects to set the Receive Channel Configuration
returned to the CM in a REG-RSP message. A CMTS
may require configuration of all pertinent Receive
Module and Receive Channel instances in order to register
a CM that reports a Receive Channel Profile (RCP),
including any standard Receive Channel Profiles.
If the CM reports multiple RCPs, and Receive Module
and Receive Channel objects have instances for more
than one RCP, the particular RCP selected by the CMTS
is not specified. A CMTS is not restricted to assigning
Receive Modules based only on the contents of this
object.
This object supports the creation and deletion of multiple
instances.
Creation of a new instance of this object requires the
ChIfIndex attribute to be set and a valid reference of
a RccCfg instance. SEQUENCE OF DocsIf3RxChCfgEntry .1.3.6.1.4.1.4491.2.1.20.1.8 |
docsIf3RxChCfgEntryThe conceptual row of docsIf3RxChCfgTable.
The ifIndex key corresponds to the MAC Domain interface
where the RCC is configured.
The CMTS persists all instances of ReceiveChannelCfg across
reinitializations. DocsIf3RxChCfgEntry .1.3.6.1.4.1.4491.2.1.20.1.8.1 |
docsIf3RxChCfgRcIdThis key represents an identifier for the parameters
of the Receive Channel instance within the Receive
Channel Profile. Unsigned32 .1.3.6.1.4.1.4491.2.1.20.1.8.1.1 |
docsIf3RxChCfgChIfIndexThis attribute contains the interface index of a Downstream
Channel that this Receive Channel Instance
defines.rw InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4491.2.1.20.1.8.1.2 |
docsIf3RxChCfgPrimaryDsIndicatorIf set to 'true', this attribute indicates the Receive
Channel is to be the primary-capable downstream
channel for the CM receiving this RCC. Otherwise, the
downstream channel is to be a non-primary-capable
channel.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4491.2.1.20.1.8.1.3 |
docsIf3RxChCfgRcRmConnectivityIdThis attribute indicates the Receive Module (via
the RmId from the ReceiveModule object) to which this
Receive Channel connects. If this object contains
a zero value (and thus no Receive Channel Connectivity),
the Receive Channel Connectivity TLV is omitted
from the RCC.rw Unsigned32 .1.3.6.1.4.1.4491.2.1.20.1.8.1.4 |
docsIf3RxChCfgRowStatusThe status of this instance.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4491.2.1.20.1.8.1.5 |
docsIf3RxChStatusTableThe Receive Channel Status object reports the status
of the statically-configured and dynamically-created
Receive Channels within an RCC. SEQUENCE OF DocsIf3RxChStatusEntry .1.3.6.1.4.1.4491.2.1.20.1.9 |
docsIf3RxChStatusEntryThe conceptual row of docsIf3RxChStatusTable.
The ifIndex key corresponds to the MAC Domain interface
where the RCC is configured. When this object is defined
on the CM, the value of RccStatusId is always 1. DocsIf3RxChStatusEntry .1.3.6.1.4.1.4491.2.1.20.1.9.1 |
docsIf3RxChStatusRcIdThis key represents an identifier for the parameters
of the Receive Channel instance within the Receive
Channel Profile. Unsigned32 .1.3.6.1.4.1.4491.2.1.20.1.9.1.1 |
docsIf3RxChStatusChIfIndexThis attribute contains the interface index of the
Downstream Channel that this Receive Channel Instance
defines.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4491.2.1.20.1.9.1.2 |
docsIf3RxChStatusPrimaryDsIndicatorIf set to 'true', this attribute indicates the Receive
Channel is to be the primary-capable downstream
channel for the CM receiving this RCC. Otherwise, the
downstream channel is to be a non-primary-capable
channel.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4491.2.1.20.1.9.1.3 |
docsIf3RxChStatusRcRmConnectivityIdThis attribute identifies the Receive Module to which
this Receive Channel connects. A value a zero indicates
that the Receive Channel Connectivity TLV is
omitted from the RCC.ro Unsigned32 .1.3.6.1.4.1.4491.2.1.20.1.9.1.4 |
docsIf3RxModuleCfgTableThe Receive Module Configuration object permits
an operator to configure how CMs with certain Receive
Channel Profiles (RCPs) will configure the Receive
Modules within their profile upon CM registration.
When a CM registers with an RCP for which all Receive
Module Indices (RmIds) are configured in this object
and all Receive Channels are configured within the
Receive Channel (ReceiveChannel) object, the CMTS
should use the configuration within these objects to
set the Receive Channel Configuration assigned to
the CM in a REG-RSP message. A CMTS may require configuration
of all pertinent Receive Module and Receive
Channel instances (i.e., MIB table entries) in order
to register a CM that reports a Receive Channel Profile.
If the CM reports multiple RCPs, and Receive Module
and Receive Channel objects have instances (i.e.,
MIB table entries) for more than one RCP reported by
the CM, the particular RCP selected by the CMTS is not
specified. A CMTS is not restricted to assigning Receive
Modules based only on the contents of this object.
This object supports the creation and deletion of multiple
instances.
Creation of a new instance of this object requires the
reference of a valid RccCfg instance. SEQUENCE OF DocsIf3RxModuleCfgEntry .1.3.6.1.4.1.4491.2.1.20.1.10 |
docsIf3RxModuleCfgEntryThe conceptual row of docsIf3RxModuleCfgTable.
The ifIndex key corresponds to the MAC Domain interface
where the RCC is configured. DocsIf3RxModuleCfgEntry .1.3.6.1.4.1.4491.2.1.20.1.10.1 |
docsIf3RxModuleCfgRmIdThis key represents an identifier of a Receive Module
instance within the Receive Channel Profile. Unsigned32 .1.3.6.1.4.1.4491.2.1.20.1.10.1.1 |
docsIf3RxModuleCfgRmRmConnectivityIdThis attribute represents the higher level (i.e.
closer to RF) Receive Module to which this Receive Module
connects. If this object contains a zero value (and
thus no Receive Module Connectivity), the Receive
Module Connectivity TLV is omitted from the RCC.
Within a single instance of the ReceiveModule object,
the RmRmConnectivityId attribute cannot contain
the same value as the RmId attribute. The RmRmConnectivityId
attribute points to a separate ReceiveModule
object instance with the same value of RccCfgId.rw Unsigned32 .1.3.6.1.4.1.4491.2.1.20.1.10.1.2 |
docsIf3RxModuleCfgFirstCenterFrequencyThis attribute represents the center frequency,
in Hz, and a multiple of 62500, that indicates the lowest
frequency channel of the Receive Module, or 0 if not
applicable to the Receive Module.rw Unsigned32 UNITS "Hz" .1.3.6.1.4.1.4491.2.1.20.1.10.1.3 |
docsIf3RxModuleCfgRowStatusThe status of this instance.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4491.2.1.20.1.10.1.4 |
docsIf3RxModuleStatusTableThe Receive Module Status object provides a read-only
view of the statically configured and dynamically
created Receive Modules within an RCC. SEQUENCE OF DocsIf3RxModuleStatusEntry .1.3.6.1.4.1.4491.2.1.20.1.11 |
docsIf3RxModuleStatusEntryThe conceptual row of docsIf3RxModuleStatusTable.
The ifIndex key corresponds to the MAC Domain interface
where the RCC is configured. When this object is defined
on the CM, the value of RccStatusId is always 1. DocsIf3RxModuleStatusEntry .1.3.6.1.4.1.4491.2.1.20.1.11.1 |
docsIf3RxModuleStatusRmIdThis key represents an identifier of a Receive Module
instance within the Receive Channel Profile. Unsigned32 .1.3.6.1.4.1.4491.2.1.20.1.11.1.1 |
docsIf3RxModuleStatusRmRmConnectivityIdThis attribute represents the Receive Module to which
this Receive Module connects. Requirements for
module connectivity are detailed in the RmRmConnectivityId
of the RccCfg object.ro Unsigned32 .1.3.6.1.4.1.4491.2.1.20.1.11.1.2 |
docsIf3RxModuleStatusFirstCenterFrequencyThis attribute represents the low frequency channel
of the Receive Module, or 0 if not applicable to the
Receive Module.ro Unsigned32 UNITS "Hz" .1.3.6.1.4.1.4491.2.1.20.1.11.1.3 |
docsIf3MdNodeStatusTableThis object reports the MD-DS-SG-ID and MD-US-SG-ID
associated with a MD-CM-SG-ID within a MAC Domain
and the Fiber Nodes reached by the MD-CM-SG. SEQUENCE OF DocsIf3MdNodeStatusEntry .1.3.6.1.4.1.4491.2.1.20.1.12 |
docsIf3MdNodeStatusEntryThe conceptual row of docsIf3MdNodeStatusTable.
The ifIndex key corresponds to the MAC Domain interface
where the MD-CM-SG-ID is configured. DocsIf3MdNodeStatusEntry .1.3.6.1.4.1.4491.2.1.20.1.12.1 |
docsIf3MdNodeStatusNodeNameThis key represents the name of a fiber node associated
with a MD-CM-SG of a MAC Domain. NodeName .1.3.6.1.4.1.4491.2.1.20.1.12.1.1 |
docsIf3MdNodeStatusMdCmSgIdThis attribute is a key and indicates the MD-CM-SG-ID
of this instance. A particular MdCmSgId in a MAC Domain
is associated with one or more Fiber Nodes. Unsigned32 .1.3.6.1.4.1.4491.2.1.20.1.12.1.2 |
docsIf3MdNodeStatusMdDsSgIdThis attribute corresponds to the MD-DS-SG-ID of
the MD-CM-SG of this object instance. The MdDsSgId values
are unique within a MAC Domain.ro Unsigned32 .1.3.6.1.4.1.4491.2.1.20.1.12.1.3 |
docsIf3MdNodeStatusMdUsSgIdThis attribute corresponds to the MD-US-SG-ID of
the MD-CM-SG of this object instance. The MdUsSgId values
are unique within a MAC Domain.ro Unsigned32 .1.3.6.1.4.1.4491.2.1.20.1.12.1.4 |
docsIf3MdDsSgStatusTableThis object returns the list of downstream channel
associated with a MAC Domain MD-DS-SG-ID. SEQUENCE OF DocsIf3MdDsSgStatusEntry .1.3.6.1.4.1.4491.2.1.20.1.13 |
docsIf3MdDsSgStatusEntryThe conceptual row of docsIf3MdDsSgStatusTable.
The ifIndex key corresponds to the MAC Domain interface
where the MD-DS-SG-ID is configured.
The CMTS is not required to persist instances of this
object across reinitializations. DocsIf3MdDsSgStatusEntry .1.3.6.1.4.1.4491.2.1.20.1.13.1 |
docsIf3MdDsSgStatusMdDsSgIdThis key represents a MD-DS-SG-ID in a Mac Domain. Unsigned32 .1.3.6.1.4.1.4491.2.1.20.1.13.1.1 |
docsIf3MdDsSgStatusChSetIdThis attribute represents a reference to the list
of downstream channels of the MD-DS-SG-ID.ro ChSetId .1.3.6.1.4.1.4491.2.1.20.1.13.1.2 |
docsIf3MdUsSgStatusTableThis object returns the list of upstream channels
associated with a MAC Domain MD-US-SG-ID. SEQUENCE OF DocsIf3MdUsSgStatusEntry .1.3.6.1.4.1.4491.2.1.20.1.14 |
docsIf3MdUsSgStatusEntryThe conceptual row of docsIf3MdUsSgStatusTable.
The ifIndex key corresponds to the MAC Domain interface
where the MD-DS-SG-ID is configured.
The CMTS is not required to persist instances of this
object across reinitializations. DocsIf3MdUsSgStatusEntry .1.3.6.1.4.1.4491.2.1.20.1.14.1 |
docsIf3MdUsSgStatusMdUsSgIdThis key represents a MD-US-SG-ID in a Mac Domain. Unsigned32 .1.3.6.1.4.1.4491.2.1.20.1.14.1.1 |
docsIf3MdUsSgStatusChSetIdThis attribute represents a reference to the list
of upstream channels of the MD-US-SG-ID.ro ChSetId .1.3.6.1.4.1.4491.2.1.20.1.14.1.2 |
docsIf3MdUsToDsChMappingTableThis object returns the set of downstream channels
that carry UCDs and MAPs for a particular upstream channel
in a MAC Domain. SEQUENCE OF DocsIf3MdUsToDsChMappingEntry .1.3.6.1.4.1.4491.2.1.20.1.15 |
docsIf3MdUsToDsChMappingEntryThe conceptual row of docsIf3MdUsToDsChMappingTable. DocsIf3MdUsToDsChMappingEntry .1.3.6.1.4.1.4491.2.1.20.1.15.1 |
docsIf3MdUsToDsChMappingUsIfIndexThis key represents the interface index of the upstream
channel to which this instance applies. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4491.2.1.20.1.15.1.1 |
docsIf3MdUsToDsChMappingDsIfIndexThis key represents the interface index of a downstream
channel carrying in UCDs and Maps associated with
the upstream channel defined by this instance. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4491.2.1.20.1.15.1.2 |
docsIf3MdUsToDsChMappingMdIfIndexThis key represents the MAC domain of the upstream
and downstream channels of this instance.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4491.2.1.20.1.15.1.3 |
docsIf3MdCfgTableThis object contains MAC domain level control and
configuration attributes. SEQUENCE OF DocsIf3MdCfgEntry .1.3.6.1.4.1.4491.2.1.20.1.16 |
docsIf3MdCfgEntryThe conceptual row of docsIf3MdCfgTable.
The CMTS persists all instances of MdCfg across
reinitializations.
The ifIndex key corresponds to the MAC Domain interface. DocsIf3MdCfgEntry .1.3.6.1.4.1.4491.2.1.20.1.16.1 |
docsIf3MdCfgMddIntervalThis attribute configures the interval for the insertion
of MDD messages in each downstream channel of
a MAC Domain.rw Unsigned32 .1.3.6.1.4.1.4491.2.1.20.1.16.1.1 |
docsIf3MdCfgIpProvModeThis attribute configures the CMTS IP provisioning
mode for a MAC Domain.
When this attribute is set to 'ipv4Only' the CM will acquire
a single IPv4 address for the CM management stack.
When this attribute is set to 'ipv6Only' the CM will acquire
a single IPv6 address for the CM management stack.
When this attribute is set to 'alternate' the CM will acquire a
single IPv6 address for the CM management stack and, if failures
occur, the CM will fall back to provision and operation with
an IPv4 address.
When this attribute is set to 'dualStack' the CM will acquire both
an IPv6 and IPv4 address for provisioning and operation.rw Enumeration .1.3.6.1.4.1.4491.2.1.20.1.16.1.2 |
docsIf3MdCfgCmStatusEvCtlEnabledIf set to 'true', this attribute enables the signaling
of the CM-Status Event reporting mechanism.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4491.2.1.20.1.16.1.3 |
docsIf3MdCfgUsFreqRangeThis attribute indicates in MDD messages the upstream
frequency upper band edge of an upstream Channel.
A value 'standard' means Standard Frequency Range and
a value 'extended' means Extended Frequency Range.rw Enumeration .1.3.6.1.4.1.4491.2.1.20.1.16.1.4 |
docsIf3MdCfgMcastDsidFwdEnabledIf set to 'true', this attribute enables the CMTS to
use IP Multicast DSID Forwarding (MDF) for the MAC domain.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4491.2.1.20.1.16.1.5 |
docsIf3MdCfgMultRxChModeEnabledIf set to 'true', this attribute enables Downstream
Channel Bonding for the MAC Domain.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4491.2.1.20.1.16.1.6 |
docsIf3MdCfgMultTxChModeEnabledIf set to 'true', this attribute enables Multiple
Transmit Channel (MTC) Mode for the MAC Domain.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4491.2.1.20.1.16.1.7 |
docsIf3MdCfgEarlyAuthEncrCtrlThis attribute enables or disables early authentication
and encryption (EAE) signaling for the MAC Domain.
It also defines the type of EAE enforcement in
the case that EAE is enabled.
If set to 'disableEAE', EAE is disabled for the MAC Domain.
If set to 'enableEaeRangingBasedEnforcement',
'enableEaeCapabilityBasedEnforcement'
or 'enableEaeTotalEnforcement',
EAE is enabled for the MAC Domain.
The following EAE enforcement methods are defined in
the case where EAE signaling is enabled:
The option 'enableEaeRangingBasedEnforcement' indicates
EAE is enforced on CMs that perform ranging
with a B-INIT-RNG-REQ message.
The option 'enableEaeCapabilityBasedEnforcement'
indicates EAE is enforced on CMs that perform ranging
with a B-INIT-RNG-REQ message in which the EAE capability
flag is set.
The option 'enableEaeTotalEnforcement' indicates
EAE is enforced on all CMs regardless of their EAE
capabilities.rw Enumeration .1.3.6.1.4.1.4491.2.1.20.1.16.1.8 |
docsIf3MdCfgTftpProxyEnabledIf set to 'true', this attribute enables TFTP Proxy
functionality for the MAC Domain.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4491.2.1.20.1.16.1.9 |
docsIf3MdCfgSrcAddrVerifEnabledIf set to 'true', this attribute enables Source Address
Verification (SAV) functionality for the MAC
Domain.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4491.2.1.20.1.16.1.10 |
docsIf3MdCfgDownChannelAnnexThis attribute defines the ITU-J-83 Annex being used
for this MAC Domain. The value of this attribute
indicates the conformance of the implementation to
important regional cable standards.
Valid enumerations for the attribute are:
unknown
other
annexA : Annex A from ITU-J83 is used.
annexB : Annex B from ITU-J83 is used.
annexC : Annex C from ITU-J83 is used.
Values 6-255 are reserved.ro Enumeration .1.3.6.1.4.1.4491.2.1.20.1.16.1.11 |
docsIf3MdCfgCmUdcEnabledIf set to 'true', this attribute instructs the CMTS MAC
Domain to enable Upstream Drop Classifiers (UDC) for the
CMs attempting registration in this MAC Domain.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4491.2.1.20.1.16.1.12 |
docsIf3MdCfgSendUdcRulesEnabledIf set to 'true' and when the CM signals to the CMTS
'Upstream Drop Classifier Group ID' encodings, this attribute
instructs the CMTS MAC Domain to send the Subscriber
Management Filters rules associated with the 'Upstream Drop
Classifier Group ID' encodings to the CM in the form of UDCs
when the following conditions occurs:
- The attribute CmUdcEnabled value for this MAC Domain
is set to 'true', and
- The CM has the UDC capability advertised as supported.
If there is no a single Subscriber Management Filter
configured in the CMTS for the CM's signaled UDC Group ID,
the CMTS does not send UDC encodings to the CM.
It is vendor specific whether the CMTS maintains enforcement
of the CM signaled or default Subscriber Management Filter
groups in the upstream direction.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4491.2.1.20.1.16.1.13 |
docsIf3MdCfgServiceTypeIdListThis attribure indicates the list of Service Type IDs
associated with the MAC Domain.
During the CM registration process the CMTS will attempt to
redirect the CM to a MAC Domain where the CM' Service Type TLV
is contained in this attribute.rw SnmpTagList (SNMP-TARGET-MIB) .1.3.6.1.4.1.4491.2.1.20.1.16.1.14 |
docsIf3BondingGrpCfgTableThis object defines statically configured Downstream
Bonding Groups and Upstream Bonding Groups on
the CMTS.
This object supports the creation and deletion of multiple
instances.
Creation of a new instance of this object requires the
ChList attribute to be set. SEQUENCE OF DocsIf3BondingGrpCfgEntry .1.3.6.1.4.1.4491.2.1.20.1.17 |
docsIf3BondingGrpCfgEntryThe conceptual row of docsIf3BondingGrpCfgTable.
The ifIndex key corresponds to the MAC Domain interface
where the Bonding Group is configured.
The CMTS persists all instances of BondingGrpCfg
across reinitializations. DocsIf3BondingGrpCfgEntry .1.3.6.1.4.1.4491.2.1.20.1.17.1 |
docsIf3BondingGrpCfgDirThis attribute defines the ordered list of channels
that comprise the channel set IfDirection .1.3.6.1.4.1.4491.2.1.20.1.17.1.1 |
docsIf3BondingGrpCfgCfgIdThis key represents the configured bonding group
identifier in the indicated direction for the MAC Domain.
This attribute is used for the sole purpose of tracking
bonding groups defined by management systems. Unsigned32 .1.3.6.1.4.1.4491.2.1.20.1.17.1.2 |
docsIf3BondingGrpCfgChListThis attribute contains the list of channels of the
bonding group.rw ChannelList .1.3.6.1.4.1.4491.2.1.20.1.17.1.3 |
docsIf3BondingGrpCfgSfProvAttrMaskThis attribute represents the Provisioned Attribute
Mask encoding for the bonding group.rw AttributeMask .1.3.6.1.4.1.4491.2.1.20.1.17.1.4 |
docsIf3BondingGrpCfgDsidReseqWaitTimeFor a Downstream Bonding Group, this attribute provides
the DSID Resequencing Wait Time that is to be used
for all DSIDs associated with this Downstream Bonding
Group. The value of 255 indicates that the DSID
Resequencing Wait Time is determined by the CMTS. The
value zero in not supported for downstream bonding
groups.
For an Upstream Bonding Group, this attribute has no
meaning and returns the value 0.rw Unsigned32 (0 | 1..180 | 255) UNITS "hundredMicroseconds" .1.3.6.1.4.1.4491.2.1.20.1.17.1.5 |
docsIf3BondingGrpCfgDsidReseqWarnThrshldFor a Downstream Bonding Group, this attribute provides
the DSID Resequencing Warning Threshold that
is to be used for all DSIDs associated with this Downstream
Bonding Group. The value of 255 indicates that
the DSID Resequencing Warning Threshold is determined
by the CMTS. The value of 0 indicates that the threshold
warnings are disabled. When
the value of DsidReseqWaitTime is not equal to 0 or 255,
the CMTS must ensure that the value of this object is either
255 or less than the value of DsidReseqWaitTime.rw Unsigned32 (0..179 | 255) UNITS "hundredMicroseconds" .1.3.6.1.4.1.4491.2.1.20.1.17.1.6 |
docsIf3BondingGrpCfgRowStatusThe status of this instance.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4491.2.1.20.1.17.1.7 |
docsIf3DsBondingGrpStatusTableThis object returns administratively-configured
and CMTS defined downstream bonding groups. SEQUENCE OF DocsIf3DsBondingGrpStatusEntry .1.3.6.1.4.1.4491.2.1.20.1.18 |
docsIf3DsBondingGrpStatusEntryThe conceptual row of docsIf3DsBondingGrpStatusTable.
The ifIndex key corresponds to the MAC Domain interface
where the Bonding Group is configured. DocsIf3DsBondingGrpStatusEntry .1.3.6.1.4.1.4491.2.1.20.1.18.1 |
docsIf3DsBondingGrpStatusChSetIdThis key represents the identifier for the Downstream
Bonding Group or the single-downstream channel
of this instance. ChSetId .1.3.6.1.4.1.4491.2.1.20.1.18.1.1 |
docsIf3DsBondingGrpStatusMdDsSgIdThis attribute corresponds to the MD-DS-SG-ID that
includes all the downstream channels of the Downstream
Bonding Group. The value zero indicates that the
bonding group does not contain channels from a single
MD-DS-SG and therefore the bonding group is not valid
and usable.ro Unsigned32 .1.3.6.1.4.1.4491.2.1.20.1.18.1.2 |
docsIf3DsBondingGrpStatusCfgIdThis attribute provides the BondingGrpCfgId for
the downstream bonding group if it was configured.
Otherwise, the zero value indicates that the CMTS will
define the bonding group.ro Unsigned32 .1.3.6.1.4.1.4491.2.1.20.1.18.1.3 |
docsIf3UsBondingGrpStatusTableThis object returns administratively-configured
and CMTS-defined upstream bonding groups. SEQUENCE OF DocsIf3UsBondingGrpStatusEntry .1.3.6.1.4.1.4491.2.1.20.1.19 |
docsIf3UsBondingGrpStatusEntryThe conceptual row of docsIf3UsBondingGrpStatusTable.
The ifIndex key corresponds to the MAC Domain interface
where the Bonding Group is configured. DocsIf3UsBondingGrpStatusEntry .1.3.6.1.4.1.4491.2.1.20.1.19.1 |
docsIf3UsBondingGrpStatusChSetIdThis key represents the identifier for the Upstream
Bonding Group or the single-upstream channel of this
instance. ChSetId .1.3.6.1.4.1.4491.2.1.20.1.19.1.1 |
docsIf3UsBondingGrpStatusMdUsSgIdThis attribute corresponds to the MD-US-SG-ID that
includes all the upstream channels of the Upstream
Bonding Group. The value zero indicates that the bonding
group does not contain channels from a single MD-US-SG
and therefore the bonding group is not valid
and usable.ro Unsigned32 .1.3.6.1.4.1.4491.2.1.20.1.19.1.2 |
docsIf3UsBondingGrpStatusCfgIdThis attribute provides the BondingGrpCfgId for
the upstream bonding group if it was configured.
Otherwise, the zero value indicates that the CMTS
defines the bonding group.ro Unsigned32 .1.3.6.1.4.1.4491.2.1.20.1.19.1.3 |
docsIf3UsChExtTableThis object defines management extensions for upstream
channels, in particular SCDMA parameters. SEQUENCE OF DocsIf3UsChExtEntry .1.3.6.1.4.1.4491.2.1.20.1.20 |
docsIf3UsChExtEntryThe conceptual row of docsIf3UsChExtTable.
The ifIndex key corresponds to each of the upstream
channels. DocsIf3UsChExtEntry .1.3.6.1.4.1.4491.2.1.20.1.20.1 |
docsIf3UsChExtSacCodeHoppingSelectionModeThis attribute indicates the selection mode for active
codes and code hopping.
'none'
Non-SCDMA channel
'sac1NoCodeHopping'
Selectable active codes mode 1 and code hopping disabled
'sac1CodeHoppingMode1'
Selectable active codes mode 1 and code hopping mode
1
'sac2CodeHoppingMode2'
Selectable active codes mode 2 and code hopping mode
2
'sac2NoCodeHopping'
Selectable active codes mode 2 and code hopping disabled.ro Enumeration .1.3.6.1.4.1.4491.2.1.20.1.20.1.1 |
docsIf3UsChExtScdmaSelectionStringActiveCodesThis attribute represents the active codes of the
upstream channel and it is applicable only when
SacCodeHoppingSelectionMode is 'sac2CodeHoppingMode2.ro ScdmaSelectionString .1.3.6.1.4.1.4491.2.1.20.1.20.1.2 |
docsIf3CmCapabilities OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.1.20.1.21 |
docsIf3CmCapabilitiesReqThis attribute contains the TLV encoding for TLV-5
sent in a REG-REQ. The first byte of this encoding is
expected to be '05'H.ro Tlv8 .1.3.6.1.4.1.4491.2.1.20.1.21.1 |
docsIf3CmCapabilitiesRspThis attribute contains the TLV encoding for TLV-5
received in a REG-RSP.
The first byte of this encoding is expected to be '05'H.ro Tlv8 .1.3.6.1.4.1.4491.2.1.20.1.21.2 |
docsIf3UsChSetTableThis object defines a set of upstream channels. These
channel sets may be associated with channel bonding
groups, MD-US-SGs, MD-CM-SGs, or any other channel
set that the CMTS may derive from other CMTS processes. SEQUENCE OF DocsIf3UsChSetEntry .1.3.6.1.4.1.4491.2.1.20.1.22 |
docsIf3UsChSetEntryThe conceptual row of docsIf3UsChSetTable.
The ifIndex key corresponds to the MAC Domain interface
where the upstream channel set is defined. DocsIf3UsChSetEntry .1.3.6.1.4.1.4491.2.1.20.1.22.1 |
docsIf3UsChSetIdThis key defines a reference identifier for the upstream
channel set within the MAC Domain. ChSetId .1.3.6.1.4.1.4491.2.1.20.1.22.1.1 |
docsIf3UsChSetChListThis attribute defines the ordered list of channels
that comprise the upstream channel setro ChannelList .1.3.6.1.4.1.4491.2.1.20.1.22.1.2 |
docsIf3DsChSetTableThis object defines a set of downstream channels.
These channel sets may be associated with channel bonding
groups, MD-DS-SGs, MD-CM-SGs, or any other channel
set that the CMTS may derive from other CMTS processes. SEQUENCE OF DocsIf3DsChSetEntry .1.3.6.1.4.1.4491.2.1.20.1.23 |
docsIf3DsChSetEntryThe conceptual row of docsIf3DsChSetTable.
The ifIndex key corresponds to the MAC Domain interface
where the downstream channel set is defined. DocsIf3DsChSetEntry .1.3.6.1.4.1.4491.2.1.20.1.23.1 |
docsIf3DsChSetIdThis key defines a reference identifier for the downstream
channel set within the MAC Domain. ChSetId .1.3.6.1.4.1.4491.2.1.20.1.23.1.1 |
docsIf3DsChSetChListThis attribute defines the ordered list of channels
that comprise the downstream channel set.ro ChannelList .1.3.6.1.4.1.4491.2.1.20.1.23.1.2 |
docsIf3SignalQualityExtTableThis object provides an in-channel received modulation
error ratio metric for CM and CMTS. SEQUENCE OF DocsIf3SignalQualityExtEntry .1.3.6.1.4.1.4491.2.1.20.1.24 |
docsIf3SignalQualityExtEntryThe conceptual row of docsIf3SignalQualityExtTable.
The ifIndex key corresponds to each of the upstream
channels. DocsIf3SignalQualityExtEntry .1.3.6.1.4.1.4491.2.1.20.1.24.1 |
docsIf3SignalQualityExtRxMERRxMER provides an in-channel received Modulation
Error Ratio (MER). RxMER is defined as an estimate,
provided by the demodulator, of the ratio:
(average constellation energy with equally likely
symbols) / (average squared magnitude of error vector)
RxMER is measured just prior to FEC (trellis/Reed-Solomon)
decoding. RxMER includes the effects of the
HFC channel as well as implementation effects of the
modulator and demodulator. Error vector estimation
may vary among demodulator implementations. The CMTS
RxMER is averaged over a given number of bursts at
the burst receiver, which may correspond to transmissions
from multiple users. In the case of S-CDMA mode,
RxMER is measured on the de-spread signal.ro TenthdB (-2147483648..2147483647) UNITS "TenthdB" .1.3.6.1.4.1.4491.2.1.20.1.24.1.1 |
docsIf3SignalQualityExtRxMerSamplesRxMerSamples is a statistically significant number
of symbols for the CM, or bursts for the CMTS, processed
to arrive at the RxMER value. For the CMTS, the MER
measurement includes only valid bursts that are not
in contention regions.ro Unsigned32 .1.3.6.1.4.1.4491.2.1.20.1.24.1.2 |
docsIf3CmtsSignalQualityExtTableThis object provides metrics and parameters associated
with received carrier, noise and interference
power levels in the upstream channels of the CMTS. SEQUENCE OF DocsIf3CmtsSignalQualityExtEntry .1.3.6.1.4.1.4491.2.1.20.1.25 |
docsIf3CmtsSignalQualityExtEntryThe conceptual row of docsIf3CmtsSignalQualityExtTable.
The ifIndex key corresponds to each of the upstream
channels.
The CMTS persists the configured values of all instances of
CmtsSignalQualityExt across reinitialization. DocsIf3CmtsSignalQualityExtEntry .1.3.6.1.4.1.4491.2.1.20.1.25.1 |
docsIf3CmtsSignalQualityExtCNIRThis attribute provides an upstream in-channel Carrier-to-Noise
plus Interference Ratio (CNIR). CNIR
is defined as the ratio of the expected commanded
received signal power at the CMTS input, assuming
QPSK0 modulation, to the noise plus
interference in the channel.
This measurement occurs prior to the point at which
the desired CM signal, when present, is demodulated.
The measurement includes the effect of the receive matched
filter but does not include the effect of any ingress filtering.
Both the signal power and noise/interference power
are referenced to the same point, e.g., CMTS input.ro TenthdB .1.3.6.1.4.1.4491.2.1.20.1.25.1.1 |
docsIf3CmtsSignalQualityExtExpectedRxSignalPowerExpectedReceivedSignalPower is the power of the
expected commanded received signal in the channel,
referenced to the CMTS input.rw TenthdBmV .1.3.6.1.4.1.4491.2.1.20.1.25.1.2 |
docsIf3CmtsSpectrumAnalysisMeasTableThis object is used to configure the logical upstream
interfaces to perform the spectrum measurements.
This object supports creation and deletion of instances. SEQUENCE OF DocsIf3CmtsSpectrumAnalysisMeasEntry .1.3.6.1.4.1.4491.2.1.20.1.26 |
docsIf3CmtsSpectrumAnalysisMeasEntryThe conceptual row of docsIf3CmtsSpectrumAnalysisMeasTable.
The ifIndex key corresponds to each of the upstream
channels.
The CMTS is not required to persist instances of this
object across reinitializations. DocsIf3CmtsSpectrumAnalysisMeasEntry .1.3.6.1.4.1.4491.2.1.20.1.26.1 |
docsIf3CmtsSpectrumAnalysisMeasAmplitudeDataThis attribute provides a list of the spectral amplitudes
corresponding to the frequency bins ordered
from lowest to highest frequencies covering the frequency
span. Information about the center frequency,
frequency span, number of bins and resolution bandwidth
are included to provide context to the measurement
point
The CMTS must support the number of bins as an odd number
in order to provide a spectrum representation that
is symmetric about the middle data point or bin. The
CMTS must support a number of bins greater than or equal
to 257 for frequency spans greater than or equal to
6.4 MHz.
The CMTS must not exceed 25 kHz bin spacing for measurement
of frequency spans less than or equal to 6.4 MHz.
The bins measurements are updated periodically at time
intervals given by the TimeInterval attribute.ro AmplitudeData .1.3.6.1.4.1.4491.2.1.20.1.26.1.1 |
docsIf3CmtsSpectrumAnalysisMeasTimeIntervalTimeInterval is the CMTS estimated average repetition
period of measurements. This attribute defines
the average rate at which new spectra can be retrieved.ro Unsigned32 UNITS "milliseconds" .1.3.6.1.4.1.4491.2.1.20.1.26.1.2 |
docsIf3CmtsSpectrumAnalysisMeasRowStatusThe status of this instance.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4491.2.1.20.1.26.1.3 |
docsIf3CmtsCmCtrl OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.1.20.1.27 |
docsIf3CmtsCmCtrlCmdMacAddrThis attribute represents the MAC Address of the CM which the
CMTS is instructed to send the CM-CTRL-REQ message.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.4491.2.1.20.1.27.1 |
docsIf3CmtsCmCtrlCmdMuteUsChIdThis attribute represents the Upstream Channel ID (UCID) to
mute or unmute. A value of zero indicates all upstream
channels. This attribute is only applicable when the
docsIf3CmtsCmCtrlCmdCommit attribute is set to
'mute'.rw ChId .1.3.6.1.4.1.4491.2.1.20.1.27.2 |
docsIf3CmtsCmCtrlCmdMuteIntervalThis attribute represents the length of time that the mute
operation is in effect. This attribute is only applicable
when the docsIf3CmtsCmCtrlCmdCommit attribute is set to
'mute'. A value of 0 is an indication to unmute the
channel referenced by the docsIf3CmtsCmCtrlCmdMuteUsChId
attribute while a value of 0xFFFFFFFF is used to mute
the channel referenced by the docsIf3CmtsCmCtrlCmdMuteUsChId
attribute indefinitely.rw Unsigned32 UNITS "milliseconds" .1.3.6.1.4.1.4491.2.1.20.1.27.3 |
docsIf3CmtsCmCtrlCmdDisableForwardingWhen set to 'true', this attribute disables data forwarding
to the CMCI when the docsIf3CmtsCmCtrlCmdCommit attribute is
set to 'disableForwarding'.
When set to 'false', this attribute enables data forwarding
to the CMCI when the docsIf3CmtsCmCtrlCmdCommit attribute is
set to 'disableForwarding'.
This attribute is only applicable when the
docsIf3CmtsCmCtrlCmdCommit attribute is set to
'disableForwarding'.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4491.2.1.20.1.27.4 |
docsIf3CmtsCmCtrlCmdCommitThis attribute indicates the type of command for the
CMTS to trigger in the CM-CTRL-REQ message.
This attribute will return the value of the last operation
performed or the default value if no operation has been
performed.rw Enumeration .1.3.6.1.4.1.4491.2.1.20.1.27.5 |
docsIf3CmDpvStatsTableThis object represents the DOCSIS Path Verify Statistics
collected in the cable modem device.
The CMTS controls the logging of DPV statistics in the
cable modem. Therefore the context and nature of the
measurements are governed by the CMTS and not self-descriptive
when read from the CM. SEQUENCE OF DocsIf3CmDpvStatsEntry .1.3.6.1.4.1.4491.2.1.20.1.28 |
docsIf3CmDpvStatsEntryThe conceptual row of docsIf3CmDpvStatsTable. DocsIf3CmDpvStatsEntry .1.3.6.1.4.1.4491.2.1.20.1.28.1 |
docsIf3CmDpvStatsGrpIdThis key represents the DPV Group ID. The CM reports
two instance of DPV statistics per downstream normally
referred as Statistical Group 1 and Statistical
Group 2. Unsigned32 .1.3.6.1.4.1.4491.2.1.20.1.28.1.1 |
docsIf3CmDpvStatsLastMeasLatencyThis attrtibute represents the last latency measurement
for this statistical group.ro Unsigned32 UNITS "nanoseconds" .1.3.6.1.4.1.4491.2.1.20.1.28.1.2 |
docsIf3CmDpvStatsLastMeasTimeThis attribute represents the last measurement time
of the last latency measurement for this statistical
group.
This attribute reports the EPOC time value when no measurements
are being reported or after the statistics
were cleared.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.4491.2.1.20.1.28.1.3 |
docsIf3CmDpvStatsMinLatencyThis attribute represents the minimum latency measurement
for this statistical group since the last
time statistics were cleared.ro Unsigned32 UNITS "nanoseconds" .1.3.6.1.4.1.4491.2.1.20.1.28.1.4 |
docsIf3CmDpvStatsMaxLatencyThis attribute represents the maximum latency measurement
for this statistical group since the last
time statistics were cleared.ro Unsigned32 UNITS "nanoseconds" .1.3.6.1.4.1.4491.2.1.20.1.28.1.5 |
docsIf3CmDpvStatsAvgLatencyThis attribute represents the average latency measurement
for this statistical group since the last
time statistics were cleared. The averaging mechanism
is controlled by the CMTS, and can be a simple average
(mean) or an exponential moving average.ro Unsigned32 UNITS "nanoseconds" .1.3.6.1.4.1.4491.2.1.20.1.28.1.6 |
docsIf3CmDpvStatsNumMeasThis attribure represents the number of latency measurements
made for this statistical group since the
last time statistics were cleared.ro Unsigned32 UNITS "measurements" .1.3.6.1.4.1.4491.2.1.20.1.28.1.7 |
docsIf3CmDpvStatsLastClearTimeThis attribute represents the last time statistics
were cleared for this statistical group.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.4491.2.1.20.1.28.1.8 |
docsIf3CmEventCtrlTableThis object represents the control mechanism to enable the
dispatching of events based on the event Id. The following
rules define the event control behavior:
o The CmEventCtrl object has no instances
Events are sent to Local Log depending on the settings of the
docsDevEvReporting object. Settings in the DocsDevEvReporting
for other dispatch mechanisms are treated as disable.
o The CmEventCtrl object contains configured instances
Only events matching the Event Ids configured in the object
are sent according to the settings of the docsDevEvReporting
object.
o The CmEventCtrl object contains an instance with Event Id 0
All events matching the Local Log settings of
docsDevEvReporting are sent to local log. Events matching
the Event Ids configured in the docsDevEvReporting and
CmEventCtrl objects are delivered to dispatch mechanisms
other than Local Log.
The CM does not persist instances of CmEventCtrl across
reinitializations. SEQUENCE OF DocsIf3CmEventCtrlEntry .1.3.6.1.4.1.4491.2.1.20.1.29 |
docsIf3CmEventCtrlEntryThe conceptual row of docsIf3CmEventCtrlTable. DocsIf3CmEventCtrlEntry .1.3.6.1.4.1.4491.2.1.20.1.29.1 |
docsIf3CmEventCtrlEventIdThis key represents the Event ID of the event being
enabled for delivery to a dispatch mechanism (e.g. syslog). Unsigned32 .1.3.6.1.4.1.4491.2.1.20.1.29.1.1 |
docsIf3CmEventCtrlStatusThe status of this instance.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4491.2.1.20.1.29.1.2 |
docsIf3CmtsEventCtrlTableThis object represents the control mechanism to enable the
dispatching of events based on the event Id. The following
rules define the event control behavior:
o The CmtsEventCtrl object has no instances
Events are sent to Local Log depending on the settings of the
docsDevEvReporting object. Settings in the DocsDevEvReporting
for other dispatch mechanisms are treated as disable.
o The CmtsEventCtrl object contains configured instances
Only events matching the Event Ids configured in the object
are sent according to the settings of the docsDevEvReporting
object.
o The CmtsEventCtrl object contains an instance with Event Id 0
All events matching the Local Log settings of
docsDevEvReporting are sent to local log. Events matching
the Event Ids configured in the docsDevEvReporting and
CmtsEventCtrl objects are delivered to dispatch mechanisms
other than Local Log.
The CMTS persists all instances of CmtsEventCtrl across
reinitializations. SEQUENCE OF DocsIf3CmtsEventCtrlEntry .1.3.6.1.4.1.4491.2.1.20.1.30 |
docsIf3CmtsEventCtrlEntryThe conceptual row of docsIf3CmtsEventCtrlTable. DocsIf3CmtsEventCtrlEntry .1.3.6.1.4.1.4491.2.1.20.1.30.1 |
docsIf3CmtsEventCtrlEventIdThis key represents the Event ID of the event being
enabled for delivery to a dispatch mechanism (e.g. syslog). Unsigned32 .1.3.6.1.4.1.4491.2.1.20.1.30.1.1 |
docsIf3CmtsEventCtrlStatusThe status of this instance.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4491.2.1.20.1.30.1.2 |
docsIf3MibConformance OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.1.20.2 |
docsIf3MibCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.1.20.2.1 |
docsIf3MibGroups OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.1.20.2.2 |