OC-STB-HOST-MIB
AI MIB Summary
The OC-STB-HOST-MIB module defines managed objects for monitoring and controlling OpenCable Set-top Host (STB) devices, specifically tracking host-side operational status, cable modem interface states, and service provisioning parameters within the DOCSIS/OpenCable architecture.
Licensed under the Apache License, Version 2.0 (the 'License'); you may not use this file except in compliance with the License. You may obtain a copy of the License at:
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an 'AS IS' BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and limitations under the License.
This MIB module contains the management objects for the management of OpenCable Set-top Host Device.
Main OID:
ocStbHostMibModule.1.3.6.1.4.1.4491.2.3.1
360
Objects
Active
Status
8
Dependencies
Imported Objects
Objects
360 total| Object Name |
|---|
ocStbHostMibModuleLicensed under the Apache License, Version 2.0 (the 'License');
you may not use this file except in compliance with the License.
You may obtain a copy of the License at:
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an 'AS IS' BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
implied.
See the License for the specific language governing permissions and
limitations under the License.
This MIB module contains the management objects for the
management of OpenCable Set-top Host Device. MODULE-IDENTITY .1.3.6.1.4.1.4491.2.3.1 |
ocStbHostNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.3.1.0 |
ocStbPanicDumpTrapNotifies host that a panic dump condition has occurred.
The headend then may issue a TFTP Get to retrieve the
dump or ignore the trap and allow the host
ocStbHostDumpEventTimeout timer to expire. This trap is
sent only when the ocStbHostDumpEventCount object has a
non-zero value. NOTIFICATION-TYPE .1.3.6.1.4.1.4491.2.3.1.0.1 |
ocStbHostMibObjects OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.3.1.1 |
ocStbHostSystem OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.3.1.1.1 |
ocStbHostHWIdentifiers OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.3.1.1.1.1 |
ocStbHostSerialNumberThe manufacturer's serial number for this device.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.4491.2.3.1.1.1.1.1 |
ocStbHostHostIDAllows the manager to retrieve the 40-bit Host ID
of the ocStbHost (SNMP apdu TLV #1) in the string
format indicated below:
M-MMU-UUU-UUU-UUL
Where:
M-MM is the decimal representation of the
10-bit CHICA assigned manufacturer number.
U-UUU-UUU-UU is the decimal representation
of the 30-bit manufacturer assigned unit number.
L is a Luhn check digit calculated over the
preceding 12 decimal digits.
If the Host ID is unknown, then the string shall
be all zeros e.g., '0-000-000-000-000'.ro DisplayString .1.3.6.1.4.1.4491.2.3.1.1.1.1.2 |
ocStbHostCapabilitiesThe capabilities indication of the STB device.
'other' means a device which is not described
by one of the other enumerations in this list.
'ochd2' means the STB device is an OpenCable Host Device
Version 2 Compliant device.
'embedded' means the STB device is of the non-removable
security type.
'dcas' means the STB device is of the downloadable
security type.
'ochd21' means the STB device is an OpenCable Host Device
Version 2.1 Compliant device.
'bocr' means the STB is bi-directional OCUR compliant.
'ochdtc' means the STB is an OpenCable Host Thin Chassis
device.ro Enumeration .1.3.6.1.4.1.4491.2.3.1.1.1.1.3 |
ocStbHostAvcSupportThe AVC capabilities indication of the STB device.
The object has a value of true (1) if AVC decode is
supported. Otherwise, the object has a value of false (2).
The object is required when the ocStbHostCapabilities value
is ochd(2); otherwise the object is optional.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4491.2.3.1.1.1.1.4 |
ocStbHostInterfaces OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.3.1.1.1.2 |
ocStbHostDevInterfaceTypes OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.3.1.1.1.2.1 |
ocStbHostOtherThe type identifier used for an interface not defined
in this MIB. OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.3.1.1.1.2.1.1 |
ocStbHostScte55FdcRxThe type identifier used for SCTE-55 FDC Receiver
(i.e., out-of-band downstream tuner). OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.3.1.1.1.2.1.2 |
ocStbHostScte55RdcTxThe type identifier used for SCTE-55 RDC Transmitter
(i.e., out-of-band upstream transmitter). OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.3.1.1.1.2.1.3 |
ocStbHostScte40FatRxThe type identifier used for SCTE-40 FAT Receiver
(i.e., in-band video tuner). OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.3.1.1.1.2.1.4 |
ocStbHostBbVideoInThe type identifier used for baseband video input. OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.3.1.1.1.2.1.5 |
ocStbHostBbAudioInThe type identifier used for baseband audio input. OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.3.1.1.1.2.1.6 |
ocStbHostBbVideoOutThe type identifier used for baseband video output. OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.3.1.1.1.2.1.7 |
ocStbHostBbAudioOutThe type identifier used for baseband audio output. OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.3.1.1.1.2.1.8 |
ocStbHostRfOutChThe type identifier used for analog RF output. OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.3.1.1.1.2.1.9 |
ocStbHostSVideoInThe type identifier used for SVideo input. OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.3.1.1.1.2.1.10 |
ocStbHostSVideoOutThe type identifier used for SVideo output. OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.3.1.1.1.2.1.11 |
ocStbHostComponentInThe type identifier used for Component input. OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.3.1.1.1.2.1.12 |
ocStbHostComponentOutThe type identifier used for Component output. OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.3.1.1.1.2.1.13 |
ocStbHostDviInThe type identifier used for DVI input. OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.3.1.1.1.2.1.14 |
ocStbHostDviOutThe type identifier used for DVI output. OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.3.1.1.1.2.1.15 |
ocStbHostHdmiInThe type identifier used for HDMI input. OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.3.1.1.1.2.1.16 |
ocStbHostHdmiOutThe type identifier used for HDMI output. OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.3.1.1.1.2.1.17 |
ocStbHostRcaSpdifInThe type identifier used for RCA SPDIF input. OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.3.1.1.1.2.1.18 |
ocStbHostRcaSpdifOutThe type identifier used for RCA SPDIF output. OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.3.1.1.1.2.1.19 |
ocStbHostToslinkSpdifInThe type identifier used for Toslink SPDIF input. OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.3.1.1.1.2.1.20 |
ocStbHostToslinkSpdifOutThe type identifier used for Toslink SPDIF output. OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.3.1.1.1.2.1.21 |
ocStbHostDisplayOutThe type identifier used for the television
screen output. OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.3.1.1.1.2.1.22 |
ocStbHost1394InThe type identifier used for IEEE-1394 input. OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.3.1.1.1.2.1.23 |
ocStbHost1394OutThe type identifier used for IEEE-1394 output. OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.3.1.1.1.2.1.24 |
ocStbHostDRIInterfaceThe type identifier used for the DRI interface. OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.3.1.1.1.2.1.25 |
ocStbHostAVInterfaceTableThis table contains a list of A/V (Audio/Video)
interfaces (video inputs/outputs, tuners, audio
inputs/outputs) in the ocStbHost. SEQUENCE OF OcStbHostAVInterfaceEntry .1.3.6.1.4.1.4491.2.3.1.1.1.2.2 |
ocStbHostAVInterfaceEntryEach entry describes the type and status of the A/V
interface on the ocStbHost. The details of A/V interface
entries may be defined in table extensions as indicated
in the MIB object ocStbHostAVInterfaceType. OcStbHostAVInterfaceEntry .1.3.6.1.4.1.4491.2.3.1.1.1.2.2.1 |
ocStbHostAVInterfaceIndexIndex of the table. Unsigned32 .1.3.6.1.4.1.4491.2.3.1.1.1.2.2.1.1 |
ocStbHostAVInterfaceTypeAn indication of the type of interface.
If this value is
ocStbHostComponentOut
then a corresponding entry exists in the
ocStbHostComponentVideoTable.
If this value is
ocStbHostRFOutCh
then a corresponding entry exists in the
ocStbHostRFChannelOutTable.
If this value is
ocStbHostScte40FatRx
then a corresponding entry exists in the
ocStbHostInBandTunerTable.
If this value is
ocStbHostDviOut or ocStbHostHdmiOut
then a corresponding entry exists in the
ocStbHostDVIHDMITable
If this value is
ocStbHost1394Out
then a corresponding entry exists in the
ocStbHostIEEE1394Table
If this value is
hrDeviceOther
then no further information is available for the device.ro AutonomousType (SNMPv2-TC) .1.3.6.1.4.1.4491.2.3.1.1.1.2.2.1.2 |
ocStbHostAVInterfaceDescTextual description of the A/V Interfacero SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.4491.2.3.1.1.1.2.2.1.3 |
ocStbHostAVInterfaceStatusStatus of the interface.
'enabled' indicates the A/V interface is active and can be
used for the user.
'disabled' indicates the A/V interface is currently not
available for the user due to hardware, software or
configuration conditions.
Additional information about the interface status may be
available in the A/V Type interface Table extensions.ro Enumeration .1.3.6.1.4.1.4491.2.3.1.1.1.2.2.1.4 |
ocStbHostIEEE1394Objects OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.3.1.1.1.2.3 |
ocStbHostIEEE1394TableThis table contains attributes associated with the
ocStbHost Interfaces of type IEEE 1394. SEQUENCE OF OcStbHostIEEE1394Entry .1.3.6.1.4.1.4491.2.3.1.1.1.2.3.1 |
ocStbHostIEEE1394EntryAn entry exists in this table for each
interface of the type IEEE 1394. OcStbHostIEEE1394Entry .1.3.6.1.4.1.4491.2.3.1.1.1.2.3.1.1 |
ocStbHostIEEE1394ActiveNodesThis object allows the manager to retrieve the
number of nodes connected to the 1394 bus of
the ocStbHost.
The value '-1' means unknown number of nodes.ro Integer32 (-1 | 0..64) UNITS "nodes" .1.3.6.1.4.1.4491.2.3.1.1.1.2.3.1.1.1 |
ocStbHostIEEE1394DataXMissionThis object allows the manager to retrieve the
state of data being transmitted over the 1394
bus. True indicates that data is being transmitted
over the 1394 bus.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4491.2.3.1.1.1.2.3.1.1.2 |
ocStbHostIEEE1394DTCPStatusThis object allows the manager to retrieve the
state of DTCP on the device. True indicates
that DTCP is enabled and content is being encrypted
of the 1394 link on the ocStbHost.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4491.2.3.1.1.1.2.3.1.1.3 |
ocStbHostIEEE1394LoopStatusThis object allows the manager to retrieve the
state of a Loop present on the 1394 bus. True
indicates that a Loop is present on the 1394 bus.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4491.2.3.1.1.1.2.3.1.1.4 |
ocStbHostIEEE1394RootStatusThis object allows the manager to retrieve the
state of Root Status on the device. True indicates
that the set-top is the Root node on the 1394 bus.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4491.2.3.1.1.1.2.3.1.1.5 |
ocStbHostIEEE1394CycleIsMasterThis object allows the manager to retrieve the
state of Cycle Master on the device. True indicates
that the set-top is Cycle Master on the 1394 bus.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4491.2.3.1.1.1.2.3.1.1.6 |
ocStbHostIEEE1394IRMStatusThis object allows the manager to retrieve the
state of Isochronous Resource Master on the
device. True indicates that the set-top is IRM
on the 1394 bus.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4491.2.3.1.1.1.2.3.1.1.7 |
ocStbHostIEEE1394AudioMuteStatusThe value 'true' indicates that the audio signal
is muted for this Interface. 'false' means the audio
is not muted.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4491.2.3.1.1.1.2.3.1.1.8 |
ocStbHostIEEE1394VideoMuteStatusThe value 'true' indicates that the video signal
is muted for this Interface. 'false' means the video
signal is not muted.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4491.2.3.1.1.1.2.3.1.1.9 |
ocStbHostIEEE1394ConnectedDevicesTableThis table contains A/D Source Selection attributes
associated to devices connected to the ocStbHost
Interfaces of type IEEE 1394. SEQUENCE OF OcStbHostIEEE1394ConnectedDevicesEntry .1.3.6.1.4.1.4491.2.3.1.1.1.2.3.2 |
ocStbHostIEEE1394ConnectedDevicesEntryAn entry exist in this table for each
device connected to all Interfaces of
the type IEEE 1394. OcStbHostIEEE1394ConnectedDevicesEntry .1.3.6.1.4.1.4491.2.3.1.1.1.2.3.2.1 |
ocStbHostIEEE1394ConnectedDevicesIndexThe unique identifier of the connected device entry. Unsigned32 .1.3.6.1.4.1.4491.2.3.1.1.1.2.3.2.1.1 |
ocStbHostIEEE1394ConnectedDevicesAVInterfaceIndexThis object allows the manager to retrieve the
index value associated with the IEEE1394
instance of ocStbHostAVInterfaceIndex
to which the device is physically connected.ro Unsigned32 .1.3.6.1.4.1.4491.2.3.1.1.1.2.3.2.1.2 |
ocStbHostIEEE1394ConnectedDevicesSubUnitTypeThis object allows the manager to retrieve the
Subunit Type associated with the device connected
to the ocStbHost's IEEE1394 interface.ro Enumeration .1.3.6.1.4.1.4491.2.3.1.1.1.2.3.2.1.3 |
ocStbHostIEEE1394ConnectedDevicesEui64This object allows the manager to retrieve the
64-bit Extended Unique Identifier (EUI-64)
associated with the device connected
to the ocStbHost's IEEE1394 interface.ro OCTET STRING .1.3.6.1.4.1.4491.2.3.1.1.1.2.3.2.1.4 |
ocStbHostIEEE1394ConnectedDevicesADSourceSelectSupportThis object allows the manager to retrieve the
status of Analog/Digital Source Selection support
associated with the device connected to the
ocStbHost's IEEE1394 interface.
'true' indicates that the device supports A/D
source selection.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4491.2.3.1.1.1.2.3.2.1.5 |
ocStbHostDigitalVideoOutput OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.3.1.1.1.2.4 |
ocStbHostDVIHDMITableThis table allows the manager to retrieve information
about the DVI/HDMI port of the ocStbHost. SEQUENCE OF OcStbHostDVIHDMIEntry .1.3.6.1.4.1.4491.2.3.1.1.1.2.4.1 |
ocStbHostDVIHDMIEntryAn entry exists for each A/V interface of type HDMI or DVI
of the ocStbHost. OcStbHostDVIHDMIEntry .1.3.6.1.4.1.4491.2.3.1.1.1.2.4.1.1 |
ocStbHostDVIHDMIOutputTypeThis object defines the operational mode of the
interface, where valid modes are dependent on
the physical interface defined.
If ocStbHostAVInterfaceIndex is DVI, then
this value is always set to 1 (DVI).
If ocStbHostAVInterfaceIndex is HDMI, then
this value is either 1 (DVI) or 2 (HDMI).ro Enumeration .1.3.6.1.4.1.4491.2.3.1.1.1.2.4.1.1.2 |
ocStbHostDVIHDMIConnectionStatusThis object allows the manager to retrieve the
state of the DVI/HDMI port on the device.
'true' indicates that a device is connected to
the ocStbHost.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4491.2.3.1.1.1.2.4.1.1.3 |
ocStbHostDVIHDMIRepeaterStatusThis object allows the manager to retrieve the
presence of a repeater connected to the ocStbHost.
'true' indicates that a repeater is connected
to the ocStbHost.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4491.2.3.1.1.1.2.4.1.1.4 |
ocStbHostDVIHDMIVideoXmissionStatusThis object allows the manager to retrieve the
state of video transmission over the DVI/HDMI port
of the ocStbHost. 'true' indicates that video is being
transmitted over the DVI/HDMI link to a connected
device.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4491.2.3.1.1.1.2.4.1.1.5 |
ocStbHostDVIHDMIHDCPStatusThis object allows the manager to retrieve the
state of the digital copy protection protocol in the
interface.
'true' indicates that HDCP encryption is enabled.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4491.2.3.1.1.1.2.4.1.1.6 |
ocStbHostDVIHDMIVideoMuteStatusThe value 'true' indicates that the video signal
is being muted over the DVI/HDMI link. 'false' means
the video signal is not muted.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4491.2.3.1.1.1.2.4.1.1.7 |
ocStbHostDVIHDMIOutputFormatThis object allows the manager to retrieve the
video timing format currently being transmitted
over the DVI/HDMI link.ro VideoOutputFormat .1.3.6.1.4.1.4491.2.3.1.1.1.2.4.1.1.8 |
ocStbHostDVIHDMIAspectRatioThis object allows the manager to retrieve the
aspect ratio applicable to the video timing
format currently being transmitted over the
DVI/HDMI link. e.g., 4/3 or 16/9.ro VideoAspectRatio .1.3.6.1.4.1.4491.2.3.1.1.1.2.4.1.1.9 |
ocStbHostDVIHDMIHostDeviceHDCPStatusConnected device HDCP status.ro Enumeration .1.3.6.1.4.1.4491.2.3.1.1.1.2.4.1.1.10 |
ocStbHostDVIHDMIAudioFormatThis object allows the manager to retrieve the
audio format being transmitted over the
HDMI link. If this entry corresponds to a DVI interface,
this object is not instantiated.ro AudioOutputFormat .1.3.6.1.4.1.4491.2.3.1.1.1.2.4.1.1.11 |
ocStbHostDVIHDMIAudioSampleRateThis object allows the manager to retrieve the
audio sample rate being transmitted over the
HDMI link. If this entry corresponds to a DVI interface,
this object is not instantiated.ro Enumeration .1.3.6.1.4.1.4491.2.3.1.1.1.2.4.1.1.12 |
ocStbHostDVIHDMIAudioChannelCountThis object allows the manager to retrieve the
audio channel count being transmitted over the
HDMI link. If this entry corresponds to a DVI interface,
this object is not instantiated.ro Unsigned32 .1.3.6.1.4.1.4491.2.3.1.1.1.2.4.1.1.13 |
ocStbHostDVIHDMIAudioMuteStatusThe value 'true' indicates that the audio signal is muted
over the DVI/HDMI link. 'false' means the audio is not
muted. This object is not instantiated for entries of
ocStbHostDVIHDMIOutputType 'dvi'.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4491.2.3.1.1.1.2.4.1.1.14 |
ocStbHostDVIHDMIAudioSampleSizeNon-zero values pertain only to PCM audio formats and
indicate the PCM sample size. This object applies only
to HDMI outputs.ro Enumeration .1.3.6.1.4.1.4491.2.3.1.1.1.2.4.1.1.15 |
ocStbHostDVIHDMIColorSpaceColor space for HDMI outputs only.ro Enumeration .1.3.6.1.4.1.4491.2.3.1.1.1.2.4.1.1.16 |
ocStbHostDVIHDMIFrameRateFrame rates for HDMI outputs as defined in CCIF spec:
frameRateCode1 = 23.976 Hz
frameRateCode2 = 24.0 Hz
frameRateCode3 = 29.97 Hz
frameRateCode4 = 30.0 Hz
frameRateCode5 = 59.94 Hz
frameRateCode6 = 60.0 Hz.ro Enumeration .1.3.6.1.4.1.4491.2.3.1.1.1.2.4.1.1.17 |
ocStbHostDVIHDMIAttachedDeviceTypeThe HDMI defined types of devices derived defined
in the DHMI specification version 1.3a.ro Enumeration .1.3.6.1.4.1.4491.2.3.1.1.1.2.4.1.1.18 |
ocStbHostDVIHDMIEdidEDID blob for debugging. A 0x00
should be returned if an EDID is
not available.ro OCTET STRING .1.3.6.1.4.1.4491.2.3.1.1.1.2.4.1.1.19 |
ocStbHostDVIHDMILipSyncDelayDefines the amount of delay in milliseconds that is
being applied to the audio delivered over the HDMI
link. A value of zero indicates that either no delay
is being applied or Lip Sync is not supported by the
device.ro Integer32 .1.3.6.1.4.1.4491.2.3.1.1.1.2.4.1.1.20 |
ocStbHostDVIHDMICecFeaturesThis object lists all of the CEC Features supported by the
device. When the bit is set, the feature is supported.ro Bits .1.3.6.1.4.1.4491.2.3.1.1.1.2.4.1.1.21 |
ocStbHostDVIHDMIFeaturesThis object lists all of the HDMI Features supported by
the device. When the bit is set, the feature is supported.ro Bits .1.3.6.1.4.1.4491.2.3.1.1.1.2.4.1.1.22 |
ocStbHostDVIHDMIMaxDeviceCountDefines the maximum number of downstream devices
that this device can support.ro Integer32 .1.3.6.1.4.1.4491.2.3.1.1.1.2.4.1.1.23 |
ocStbHostDVIHDMIPreferredVideoFormatThis object allows the manager to retrieve the
preferred video format of the sink device. The
value is an integer representing the video timing
format expressed as a CEA-861 Video Identification
Code (VIC).
If the Host is not able to determine the preferred
video format, or there is no corresponding VIC,
then the Host sets this value to zero. The Host also
sets this value to zero if there is no EDID or
active HDMI/DVI connection in place.ro INTEGER .1.3.6.1.4.1.4491.2.3.1.1.1.2.4.1.1.24 |
ocStbHostDVIHDMIEdidVersionEDID version reported in bytes 18 and 19 of the EDID
itself. It is in version.release format. A value of 0.0
should be returned if an EDID is not available.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.4491.2.3.1.1.1.2.4.1.1.25 |
ocStbHostDVIHDMI3DCompatibilityControlDefines what action to take for a display device that
has not reported support for the received S3D content.
passthru3D(1) requires the content to be passed
onto the display device. blocked3D(2) requires the STB
to not pass the content to the display device.rw Enumeration .1.3.6.1.4.1.4491.2.3.1.1.1.2.4.1.1.26 |
ocStbHostDVIHDMI3DCompatibilityMsgDisplayTrue(1) requires the STB to generate and transmit a warning
message when the following occurs: 1) the STB receives
S3D content and 2) the display device has not reported support
for that format. The message should indicate that an
incompatibility may exist between the source format and the
display device capabilities. The STB must not send a warning
message in this scenario if this object is set to false(2).rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4491.2.3.1.1.1.2.4.1.1.27 |
ocStbHostDVIHDMIAvailableVideoFormatTableThis table allows the manager to retrieve a list
of all of the video timing formats reported by the
sink device as per the device's EDID. SEQUENCE OF OcStbHostDVIHDMIAvailableVideoFormatEntry .1.3.6.1.4.1.4491.2.3.1.1.1.2.4.2 |
ocStbHostDVIHDMIAvailableVideoFormatEntryEntry in the ocStbHostDVIHDMIAvailableVideoFormatTable. OcStbHostDVIHDMIAvailableVideoFormatEntry .1.3.6.1.4.1.4491.2.3.1.1.1.2.4.2.1 |
ocStbHostDVIHDMIAvailableVideoFormatIndexIndex in the ocStbHostDVIHDMIAvailableVideoFormatTable. INTEGER .1.3.6.1.4.1.4491.2.3.1.1.1.2.4.2.1.1 |
ocStbHostDVIHDMIAvailableVideoFormatThis object allows the manager to retrieve the
available video formats of the sink device. The
value is an integer representing the video timing
format expressed as a CEA-861 Video Identification
Code (VIC).
If the Host is not able to determine the available
video formats, or there is no corresponding VIC,
then the Host makes an entry with a value of zero.
The Host also makes an entry with a value of zero
if there is no active HDMI/DVI connection in place.ro INTEGER .1.3.6.1.4.1.4491.2.3.1.1.1.2.4.2.1.2 |
ocStbHostDVIHDMISupported3DStructuresThis object reports the 3D structures supported by
the sink as reported in the EDID VSDB. The supported
structures are specified in [HDMI] Appendix H.ro Bits .1.3.6.1.4.1.4491.2.3.1.1.1.2.4.2.1.3 |
ocStbHostDVIHDMIActive3DStructureThis object allows the manager to retrieve the
contents of the HDMI Vendor Specific InfoFrame currently
being transmitted by the source. The video signal
corresponds to the row associated with sink's current
'active' VIC. Only one row can reflect an active 3D format
at any point in time. The remaining, 'inactive', rows in
this table should report 'na(1)' for not applicable.
This object must be updated whenever the current
HDMI InfoFrame content differs from the last HDMI InfoFrame
transmitted. All reported values are based on the
HDMI InfoFrame packet contents defined in [HDMI].
If 3D is currently being signaled, report the 3D structure
identified in the InfoFrame.
If an HDMI InfoFrame is being transmitted but no 3D structure
is being signaled, use the HDMI_Video_format values in the
HDMI Infoframe to report as follows:
000 - 'noAdditionalHDMIInfo(17)'
001 - 'no3DInformation(18)'
If an HDMI InfoFrame is not being transmitted, report
'infoFrameNotAvailable(19)'.ro Enumeration .1.3.6.1.4.1.4491.2.3.1.1.1.2.4.2.1.4 |
ocStbHostAnalogOutput OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.3.1.1.1.2.5 |
ocStbHostComponentVideoTableThis table allows the manager to retrieve information
about a Component Video interface of the ocStbHost. SEQUENCE OF OcStbHostComponentVideoEntry .1.3.6.1.4.1.4491.2.3.1.1.1.2.5.1 |
ocStbHostComponentVideoEntryAn entry for each interface of type
'ocStbHostComponentOut'. OcStbHostComponentVideoEntry .1.3.6.1.4.1.4491.2.3.1.1.1.2.5.1.1 |
ocStbHostComponentVideoConstrainedStatusThis object allows the manager to retrieve the
state of Constrained Video Image on the port.
True indicates that video is being constrained
over the component video output port.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4491.2.3.1.1.1.2.5.1.1.1 |
ocStbHostComponentOutputFormatThis object allows the manager to retrieve the
video format currently being transmitted over
the Component Video output port.ro VideoOutputFormat .1.3.6.1.4.1.4491.2.3.1.1.1.2.5.1.1.2 |
ocStbHostComponentAspectRatioThis object allows the manager to retrieve the
video aspect ratio currently being transmitted over
the Component Video output port.ro VideoAspectRatio .1.3.6.1.4.1.4491.2.3.1.1.1.2.5.1.1.3 |
ocStbHostComponentVideoMuteStatusThe value 'true' indicates that the video signal is
muted for this Interface. 'false' means the video
signal is not muted.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4491.2.3.1.1.1.2.5.1.1.4 |
ocStbHostRFChannelOutTableThis table allows the manager to retrieve information
about an RF channel output interface of the ocStbHost. SEQUENCE OF OcStbHostRFChannelOutEntry .1.3.6.1.4.1.4491.2.3.1.1.1.2.5.2 |
ocStbHostRFChannelOutEntryAn entry for each interface of type 'ocStbHostRFOutCh'. OcStbHostRFChannelOutEntry .1.3.6.1.4.1.4491.2.3.1.1.1.2.5.2.1 |
ocStbHostRFChannelOutIndicates the RF channel out value. Typical values are
3 or 4 for Channels 3 and 4, respectively.ro Unsigned32 .1.3.6.1.4.1.4491.2.3.1.1.1.2.5.2.1.2 |
ocStbHostRFChannelOutAudioMuteStatusThe value 'true' indicates that the audio signal is
muted for this Interface. 'false' means the audio
is not muted.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4491.2.3.1.1.1.2.5.2.1.3 |
ocStbHostRFChannelOutVideoMuteStatusThe value 'true' indicates that the video signal is
muted for this Interface. 'false' means the video
signal is not muted.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4491.2.3.1.1.1.2.5.2.1.4 |
ocStbHostSPDIfTableThis table allows the manager to retrieve information
about the SONY, Philips Digital (SPD) Interface of the
ocStbHost. SEQUENCE OF OcStbHostSPDIfEntry .1.3.6.1.4.1.4491.2.3.1.1.1.2.6 |
ocStbHostSPDIfEntryAn entry exists for each Audio interface of type SPD. OcStbHostSPDIfEntry .1.3.6.1.4.1.4491.2.3.1.1.1.2.6.1 |
ocStbHostSPDIfAudioFormatThe format of the Audio stream transmitted over this
interface.ro AudioOutputFormat .1.3.6.1.4.1.4491.2.3.1.1.1.2.6.1.1 |
ocStbHostSPDIfAudioMuteStatusThe value 'true' indicates that the audio signal is muted
over the SPDIF link. 'false' means the audio is not muted.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4491.2.3.1.1.1.2.6.1.2 |
ocStbHostServiceProgramInfo OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.3.1.1.1.2.7 |
ocStbHostInBandTunerTableThis Object Table allows the manager to retrieve
information regarding the In-Band tuner(s) in
the ocStbHost. SEQUENCE OF OcStbHostInBandTunerEntry .1.3.6.1.4.1.4491.2.3.1.1.1.2.7.1 |
ocStbHostInBandTunerEntryThis entry contains information regarding
a tuner of type ocStbHostScte40FatRx in the ocStbHost. OcStbHostInBandTunerEntry .1.3.6.1.4.1.4491.2.3.1.1.1.2.7.1.1 |
ocStbHostInBandTunerModulationModeThe In-band tuner modulation mode.
Modulation modes are as follows:
other - IB is configured in a manner not described
by any other listed mode.
Analog - IB is configured for analog service.
QAM-64 - IB is configured for a digital service that
is 64-QAM.
QAM-256 - IB is configured for a digital service that
is 256-QAM.ro Enumeration .1.3.6.1.4.1.4491.2.3.1.1.1.2.7.1.1.1 |
ocStbHostInBandTunerFrequencyThis object allows the manager to retrieve the center
frequency of the currently tuned channel in Hz.ro Unsigned32 UNITS "hertz" .1.3.6.1.4.1.4491.2.3.1.1.1.2.7.1.1.2 |
ocStbHostInBandTunerInterleaverThe in-band interface interleaver value.
set to '3' current operational mode 'taps64Increment2'
set to '4' current operational mode 'taps128Increment1'
set to '5' current operational mode 'taps128increment2'
set to '6' current operational mode 'taps128increment3'
set to '7' current operational mode 'taps128increment4'
set to '8' current operational mode 'taps32increment4'
set to '9' current operational mode 'taps16increment8'
set to '10' current operational mode 'taps8increment16'ro Enumeration .1.3.6.1.4.1.4491.2.3.1.1.1.2.7.1.1.3 |
ocStbHostInBandTunerPowerThe received power level of this in-band interface.ro TenthdBmV UNITS "dBmV" .1.3.6.1.4.1.4491.2.3.1.1.1.2.7.1.1.4 |
ocStbHostInBandTunerAGCValueThis object allows the manager to retrieve the
In-band channel AGC value (%). When an In-band
Carrier Lock is indicated, a value of 0 (zero)
indicates that the ocStbHost does not compute the
value.ro Unsigned32 .1.3.6.1.4.1.4491.2.3.1.1.1.2.7.1.1.5 |
ocStbHostInBandTunerSNRValueThis object allows the manager to retrieve the
In-band channel SNR value (1/10 dB). When an
In-band Carrier Lock is indicated, a value of 0
(zero) indicates that the ocStbHost does not compute
the value.ro TenthdB UNITS "dB" .1.3.6.1.4.1.4491.2.3.1.1.1.2.7.1.1.6 |
ocStbHostInBandTunerUnerroredsCodewords received on this channel without error.
Discontinuities in the value of this counter can occur
at reinitialization of the managed system, and at other
times as indicated by the value of
ifCounterDiscontinuityTime for the associated ifIndex.ro Counter32 UNITS "codewords" .1.3.6.1.4.1.4491.2.3.1.1.1.2.7.1.1.7 |
ocStbHostInBandTunerCorrectedsCodewords received on this in-band channel with
correctable errors. Discontinuities in the value of
this counter can occur at reinitialization of the
managed system.ro Counter32 UNITS "codewords" .1.3.6.1.4.1.4491.2.3.1.1.1.2.7.1.1.8 |
ocStbHostInBandTunerUncorrectablesCodewords received on this in-band channel with
uncorrectable errors.
Discontinuities in the value of this counter can occur
at reinitialization of the managed system.ro Counter32 UNITS "codewords" .1.3.6.1.4.1.4491.2.3.1.1.1.2.7.1.1.9 |
ocStbHostInBandTunerCarrierLockLostThe number of times the ocStbHost has detected carrier
Lock is lost.
Discontinuities in the value of this counter can occur
at reinitialization of the managed system.ro Counter32 .1.3.6.1.4.1.4491.2.3.1.1.1.2.7.1.1.10 |
ocStbHostInBandTunerPCRErrorsThe number of times the Program Clock Reference (PCR)
detected Synchronization errors; e.g., wrong PCR from
multiplexer, excessive CPR Jitter, etc.
Discontinuities in the value of this counter can occur
at reinitialization of the managed system.ro Counter32 .1.3.6.1.4.1.4491.2.3.1.1.1.2.7.1.1.11 |
ocStbHostInBandTunerPTSErrorsThe number of Presentation TimeStamp (PTS) packets that
encounter sequencing errors.
Discontinuities in the value of this counter can occur
at reinitialization of the managed system.ro Counter32 .1.3.6.1.4.1.4491.2.3.1.1.1.2.7.1.1.12 |
ocStbHostInBandTunerStateThe In-band tuner current state.
Modulation modes are as follows:
ready - indicates that the tuner is in idle mode (not
currently in use).
waitingSync - indicates that the tuner is trying to
find sync on an analog channel.
waitingQam - indicates that the tuner is trying to tune
to the desired QAM frequency and lock onto valid data.
foundSync - indicates that the tuner has successfully
tuned to an analog channel.
foundQam - indicates that the tuner has successfully
tuned to a digital channel.ro Enumeration .1.3.6.1.4.1.4491.2.3.1.1.1.2.7.1.1.13 |
ocStbHostInBandTunerBERThe average Bit Error Rate range since last tune to a digital
channel. This value is determined by dividing the number of
erroneous bits by the total number of bits transmitted
within the last 10 minutes of the object being polled.
Report value of 7 if tuned to an analog channel.ro Enumeration .1.3.6.1.4.1.4491.2.3.1.1.1.2.7.1.1.14 |
ocStbHostInBandTunerSecsSinceLockThe amount of time, in seconds, since the last tuner lock
on a valid data signal. Each time the tuner locks the
ocStbHostInBandTunerUnerroreds,
ocStbHostInBandTunerCorrecteds, and
ocStbHostInBandTunerUncorrectables, counters should be
set to 0.ro Unsigned32 .1.3.6.1.4.1.4491.2.3.1.1.1.2.7.1.1.15 |
ocStbHostInBandTunerEqGainThe value of the equalizer gain on the QAM data channel.
A value of 0 (zero) indicates that the ocStbHost does not
compute the value.ro Integer32 .1.3.6.1.4.1.4491.2.3.1.1.1.2.7.1.1.16 |
ocStbHostInBandTunerMainTapCoeffThe normalized main tap coefficient used for calibrating
data path delay or frequency response. A value of 0 (zero)
indicates that the ocStbHost does not compute the value.ro INTEGER .1.3.6.1.4.1.4491.2.3.1.1.1.2.7.1.1.17 |
ocStbHostInBandTunerTotalTuneCountThe number of times an attempt has been made to change
the tuned frequency. This includes both successful and
unsuccessful attempts.ro Counter32 .1.3.6.1.4.1.4491.2.3.1.1.1.2.7.1.1.18 |
ocStbHostInBandTunerTuneFailureCountThe number of times an attempt to change the tuned
frequency has resulted in a failure to acquire a signal
(either analog or digital).ro Counter32 .1.3.6.1.4.1.4491.2.3.1.1.1.2.7.1.1.19 |
ocStbHostInBandTunerTuneFailFreqThe most recent frequency at which an attempt to tune
resulted in an increment of
ocStbHostInBandTunerTuneFailureCount. If no tune attempt
has failed since initialization, this value
SHALL be zero.ro Unsigned32 UNITS "hertz" .1.3.6.1.4.1.4491.2.3.1.1.1.2.7.1.1.20 |
ocStbHostInBandTunerBandwidthThe In-band tuner bandwidth.
Tuner bandwidth choices are as follows:
other - Tuning range is not described
by any other listed range.
mHz864 - Tuning range is 54 to 864 MHz
mHz1002 - Tuning range is 54 to 1002 MHz.ro Enumeration .1.3.6.1.4.1.4491.2.3.1.1.1.2.7.1.1.21 |
ocStbHostProgramStatusTableA table of current program content being forwarded by the
ocStbHost. SEQUENCE OF OcStbHostProgramStatusEntry .1.3.6.1.4.1.4491.2.3.1.1.1.2.7.2 |
ocStbHostProgramStatusEntryThere is an entry in this table for each active program
content path.
This means that the same program content source and/or
destination can be associated to multiple A/V interface
combinations as different entries in this table. OcStbHostProgramStatusEntry .1.3.6.1.4.1.4491.2.3.1.1.1.2.7.2.1 |
ocStbHostProgramIndexIndex for Program Status Entry Table. Unsigned32 .1.3.6.1.4.1.4491.2.3.1.1.1.2.7.2.1.1 |
ocStbHostProgramAVSourceDefines the source interface
associated with this entry. Example sources are
interfaces listed in the ifTable, interfaces listed in
ocStbAVInterfaceTable, or a Host Resources Device such as a
DVR.
If the source corresponds to an entry in the
ocStbAVInterfaceTable, this object reports the
ocStbAVInterfaceType instance of the source interface.
If the source corresponds to a resource listed in the
ifTable, this object reports the ifIndex instance of
the source interface.
If the source corresponds to a resource listed in
hrDeviceTable, this object reports the hrDeviceType
instance of the source interface.
Other table rows may be designated by this object
as appropriate to the particular source.ro RowPointer (SNMPv2-TC) .1.3.6.1.4.1.4491.2.3.1.1.1.2.7.2.1.2 |
ocStbHostProgramAVDestinationDefines the destination interface
associated with this entry. Example destinations are
interfaces listed in the ifTable, interfaces listed in
ocStbAVInterfaceTable,
or a Host Resource Device such as a DVR.
If the destination corresponds to an entry in the
ocStbAVInterfaceTable, this object reports the
ocStbAVInterfaceType instance of the destination
interface.
If the destination corresponds to an interface listed in
the ifTable, this object reports the ifIndex instance of
the destination interface.
If the destination corresponds to a resource listed in the
hrDeviceTable, this object reports the hrDeviceType
instance of the destination interface.
Other table rows may be designated by this object
as appropriate to the particular destination.ro RowPointer (SNMPv2-TC) .1.3.6.1.4.1.4491.2.3.1.1.1.2.7.2.1.3 |
ocStbHostProgramContentSourceA pointer to the first visible object structure that
defines the type of content associated to the A/V source
interface. If MPEG-2 video is present,, this
object points to the first visible object in
ocStbHostMpeg2ContentEntry.
If AVC video is present, this object points to the first
visible object in ocStbHostMpeg4ContentEntry.
If VC-1 is present, this object points to the first
visible object in ocStbHostVc1ContentEntry.
Vendor-specific Content models may be defined in the vendor
enterprise IANA assigned OID.
This object reports 'zeroDotZero' value if no content
information is available.ro RowPointer (SNMPv2-TC) .1.3.6.1.4.1.4491.2.3.1.1.1.2.7.2.1.4 |
ocStbHostProgramContentDestinationA pointer to the first visible object structure that
defines the type of content associated to the A/V
destination interface.
If MPEG-2 video is present, this object points to the
first visible object in ocStbHostMpeg2ContentEntry.
If AVC video is present, this object points to the first
visible object in ocStbHostMpeg4ContentEntry.
If VC-1 is present, this object points to the first
visible object in ocStbHostVc1ContentEntry.
Vendor-specific Content models may be defined in the vendor
enterprise IANA assigned OID.
This object reports 'zeroDotZero' value if no content
information is available.ro RowPointer (SNMPv2-TC) .1.3.6.1.4.1.4491.2.3.1.1.1.2.7.2.1.5 |
ocStbHostMpeg2ContentTableContains information associated to an MPEG-2
Program carried by an MPEG-2 transport stream.
Entries in this table can be
associated to interfaces receiving or forwarding
MPEG-2 content. SEQUENCE OF OcStbHostMpeg2ContentEntry .1.3.6.1.4.1.4491.2.3.1.1.1.2.7.3 |
ocStbHostMpeg2ContentEntryThe conceptual row for this table. OcStbHostMpeg2ContentEntry .1.3.6.1.4.1.4491.2.3.1.1.1.2.7.3.1 |
ocStbHostMpeg2ContentIndexThe unique identifier for the Mpeg2 Content entries in
this table. Unsigned32 .1.3.6.1.4.1.4491.2.3.1.1.1.2.7.3.1.1 |
ocStbHostMpeg2ContentProgramNumberThe program Number associated with active content within
the ocStbHost.ro Unsigned32 .1.3.6.1.4.1.4491.2.3.1.1.1.2.7.3.1.2 |
ocStbHostMpeg2ContentTransportStreamIDDefines the transport stream ID associated with the
program number.ro Unsigned32 .1.3.6.1.4.1.4491.2.3.1.1.1.2.7.3.1.3 |
ocStbHostMpeg2ContentTotalStreamsDefines the total number of elementary streams associated
with the program number.ro Unsigned32 UNITS "streams" .1.3.6.1.4.1.4491.2.3.1.1.1.2.7.3.1.4 |
ocStbHostMpeg2ContentSelectedVideoPIDThis object allows the manager to retrieve the
PID associated to the selected video
stream. The value '-1' indicates that no video stream
is being selected or identified.
The value is the 13-bit PID value expressed in decimal.ro Integer32 (-1 | 1..8191) .1.3.6.1.4.1.4491.2.3.1.1.1.2.7.3.1.5 |
ocStbHostMpeg2ContentSelectedAudioPIDThe selected audio PID.
The value '-1' indicates no audio stream identified.ro Integer32 (-1 | 1..8191) .1.3.6.1.4.1.4491.2.3.1.1.1.2.7.3.1.6 |
ocStbHostMpeg2ContentOtherAudioPIDsThen value 'true' indicates the MPEG-2 program
has more than one audio PID.
'false' indicates the MPEG-2 program has only one
audio PID.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4491.2.3.1.1.1.2.7.3.1.7 |
ocStbHostMpeg2ContentCCIValueThis value allows the manager to retrieve the
encryption Mode Indication (EMI) Bits of the
Copy Control Information (CCI) byte associated
with the service.ro Enumeration .1.3.6.1.4.1.4491.2.3.1.1.1.2.7.3.1.8 |
ocStbHostMpeg2ContentAPSValueThis value allows the manager to retrieve the
Analog Protection System (APS) bits of the
Copy Control Information (CCI) byte
associated with the service.
'type1' indicates AGC ON, split burst OFF
'type2' indicates AGC ON, 2-line split burst
'type3' indicates AGC ON, 4-line split burst.ro Enumeration .1.3.6.1.4.1.4491.2.3.1.1.1.2.7.3.1.9 |
ocStbHostMpeg2ContentCITStatusThis value allows the manager to retrieve the state
of the Constrained Image Trigger(CIT).
'true' indicates image constraint required.
'false' indicates image constraint not asserted.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4491.2.3.1.1.1.2.7.3.1.10 |
ocStbHostMpeg2ContentBroadcastFlagStatusThis value allows the manager to retrieve the state
of Broadcast Flag in the source interface.
'true' indicates Broadcast Flag present.
'false' indicates Broadcast Flag not present.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4491.2.3.1.1.1.2.7.3.1.11 |
ocStbHostMpeg2ContentEPNStatusThis object allows the manager to retrieve the
EPN status of the MPEG stream. 'true' indicates
that EPN is asserted.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4491.2.3.1.1.1.2.7.3.1.12 |
ocStbHostMpeg2ContentPCRPIDThis object allows the manager to retrieve the
PCR PID associated to the selected video
stream. The value '-1' indicates that no video stream
is being selected or identified. The value is the 13-bit
PCR PID value expressed in decimal.ro Integer32 (-1 | 1..8191) .1.3.6.1.4.1.4491.2.3.1.1.1.2.7.3.1.13 |
ocStbHostMpeg2ContentPCRLockStatusThe status of the Program Clock Reference lock.ro Enumeration .1.3.6.1.4.1.4491.2.3.1.1.1.2.7.3.1.14 |
ocStbHostMpeg2ContentDecoderPTSThe value of the MPEG decoder Presentation TimeStamp
(PTS). The LSB should be dropped to reduce the PTS length
to 32 bits.ro Integer32 .1.3.6.1.4.1.4491.2.3.1.1.1.2.7.3.1.15 |
ocStbHostMpeg2ContentDiscontinuitiesThe sum of the audio and video PID discontinuities
detected on the MPEG stream. The values are based on
the time since PCR lock on the current PIDs or stream being
reportedro Counter32 .1.3.6.1.4.1.4491.2.3.1.1.1.2.7.3.1.16 |
ocStbHostMpeg2ContentPktErrorsThe number of errors detected in the MPEG stream. The
Values are based on the time since PCR lock on the
Current PIDs or stream being reportedro Counter32 .1.3.6.1.4.1.4491.2.3.1.1.1.2.7.3.1.17 |
ocStbHostMpeg2ContentPipelineErrorsThe number of errors reported exclusively by the MPEG decoder.ro Counter32 .1.3.6.1.4.1.4491.2.3.1.1.1.2.7.3.1.18 |
ocStbHostMpeg2ContentDecoderRestartsThe number of times the software driver restarted
the MPEG decoding process.ro Counter32 .1.3.6.1.4.1.4491.2.3.1.1.1.2.7.3.1.19 |
ocStbHostMpeg2ContainerFormatThe format of the transport carrying the
MPEG2 video stream.ro VideoContainerFormat .1.3.6.1.4.1.4491.2.3.1.1.1.2.7.3.1.20 |
ocStbHostAnalogVideoTableContains information about the Analog Video signal.
Entries in this table can be associated to interfaces
receiving or forwarding analog content. SEQUENCE OF OcStbHostAnalogVideoEntry .1.3.6.1.4.1.4491.2.3.1.1.1.2.7.4 |
ocStbHostAnalogVideoEntryThe conceptual row for this table. OcStbHostAnalogVideoEntry .1.3.6.1.4.1.4491.2.3.1.1.1.2.7.4.1 |
ocStbHostAnalogVideoProtectionStatusThe analog protection system (APS) of this Video content
entry. The possible values are:
'copyProtectionOff' means the Macrovision Analog protection
is off
'splitBurstOff' means the AGC (Automatic Gain Control)
is on and the split burst is off.
'twoLineSplitBurst' means AGC is on with two-line
split burst.
'fourLineSplitBurst' means AGC is on with four-line
split burst.
This object is instantiated only for A/V output interfaces
that support APS like but not limited to:
'ocStbHostRfOutCh', 'ocStbHostSVideoOut' and
'ocStbHostBbVideoOut'.
The A/V interfaces 'ocStbHostComponentOut'
only support 'splitBurstOff' APS mode for the video formats
'format480i' and 'format480p'.ro Enumeration .1.3.6.1.4.1.4491.2.3.1.1.1.2.7.4.1.1 |
ocStbHostMpeg4ContentTableContains information associated to an MPEG-4
Program carried by an MPEG-2 or MPEG-4 transport stream.
Entries in this table can be associated to interfaces
receiving or forwarding MPEG-4 content. SEQUENCE OF OcStbHostMpeg4ContentEntry .1.3.6.1.4.1.4491.2.3.1.1.1.2.7.5 |
ocStbHostMpeg4ContentEntryThe conceptual row for this table. OcStbHostMpeg4ContentEntry .1.3.6.1.4.1.4491.2.3.1.1.1.2.7.5.1 |
ocStbHostMpeg4ContentIndexThe unique identifier for the MPEG-4 Content entries in
this table. Unsigned32 .1.3.6.1.4.1.4491.2.3.1.1.1.2.7.5.1.1 |
ocStbHostMpeg4ContentProgramNumberThe program Number associated with active content within
the ocStbHost.ro Unsigned32 .1.3.6.1.4.1.4491.2.3.1.1.1.2.7.5.1.2 |
ocStbHostMpeg4ContentTransportStreamIDDefines the transport stream ID associated with the
program number.ro Unsigned32 .1.3.6.1.4.1.4491.2.3.1.1.1.2.7.5.1.3 |
ocStbHostMpeg4ContentTotalStreamsDefines the total number of elementary streams associated
with the program number.ro Unsigned32 UNITS "streams" .1.3.6.1.4.1.4491.2.3.1.1.1.2.7.5.1.4 |
ocStbHostMpeg4ContentSelectedVideoPIDThis object allows the manager to retrieve the
PID associated to the selected video stream. The
value '-1' indicates that no video stream is being
selected or identified. The value is the 13-bit
PID value expressed in decimal.ro Integer32 (-1 | 1..8191) .1.3.6.1.4.1.4491.2.3.1.1.1.2.7.5.1.5 |
ocStbHostMpeg4ContentSelectedAudioPIDThe selected audio PID.
The value '-1' indicates no audio stream identified.ro Integer32 (-1 | 1..8191) .1.3.6.1.4.1.4491.2.3.1.1.1.2.7.5.1.6 |
ocStbHostMpeg4ContentOtherAudioPIDsThen value 'true' indicates the MPEG-2 program
has more than one audio PID. 'false' indicates
the MPEG-4 program has only one audio PID.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4491.2.3.1.1.1.2.7.5.1.7 |
ocStbHostMpeg4ContentCCIValueThis value allows the manager to retrieve the
Encryption Mode Indication (EMI) Bits of the
Copy Control Information (CCI) byte associated
with the service.ro Enumeration .1.3.6.1.4.1.4491.2.3.1.1.1.2.7.5.1.8 |
ocStbHostMpeg4ContentAPSValueThis value allows the manager to retrieve the
Analog Protection System (APS) bits of the
Copy Control Information (CCI) byte
associated with the service.
'type1' indicates AGC ON, split burst OFF
'type2' indicates AGC ON, 2-line split burst
'type3' indicates AGC ON, 4-line split burst.ro Enumeration .1.3.6.1.4.1.4491.2.3.1.1.1.2.7.5.1.9 |
ocStbHostMpeg4ContentCITStatusThis value allows the manager to retrieve the state
of the Constrained Image Trigger(CIT).
'true' indicates image constraint required.
'false' indicates image constraint not asserted.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4491.2.3.1.1.1.2.7.5.1.10 |
ocStbHostMpeg4ContentBroadcastFlagStatusThis value allows the manager to retrieve the state
of Broadcast Flag in the source interface.
'true' indicates Broadcast Flag present.
'false' indicates Broadcast Flag not present.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4491.2.3.1.1.1.2.7.5.1.11 |
ocStbHostMpeg4ContentEPNStatusThis object allows the manager to retrieve the
EPN status of the MPEG stream. 'true' indicates
that EPN is asserted.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4491.2.3.1.1.1.2.7.5.1.12 |
ocStbHostMpeg4ContentPCRPIDThis object allows the manager to retrieve the
PCR PID associated to the selected video
stream. The value '-1' indicates that no video stream
is being selected or identified. The value is the 13-bit
PCR PID value expressed in decimal.ro Integer32 (-1 | 1..8191) .1.3.6.1.4.1.4491.2.3.1.1.1.2.7.5.1.13 |
ocStbHostMpeg4ContentPCRLockStatusThe status of the Program Clock Reference lock.ro Enumeration .1.3.6.1.4.1.4491.2.3.1.1.1.2.7.5.1.14 |
ocStbHostMpeg4ContentDecoderPTSThe value of the MPEG decoder Presentation TimeStamp
(PTS). The LSB should be dropped to reduce the PTS length
to 32 bits.ro Integer32 .1.3.6.1.4.1.4491.2.3.1.1.1.2.7.5.1.15 |
ocStbHostMpeg4ContentDiscontinuitiesThe sum of the audio and video PID discontinuities
detected on the MPEG stream. The values are based on
the time since PCR lock on the current PIDs or stream being
reported.ro Counter32 .1.3.6.1.4.1.4491.2.3.1.1.1.2.7.5.1.16 |
ocStbHostMpeg4ContentPktErrorsThe number of errors detected in the MPEG stream. The
Values are based on the time since PCR lock on the
Current PIDs or stream being reported.ro Counter32 .1.3.6.1.4.1.4491.2.3.1.1.1.2.7.5.1.17 |
ocStbHostMpeg4ContentPipelineErrorsThe number of errors reported exclusively by
the MPEG decoder.ro Counter32 .1.3.6.1.4.1.4491.2.3.1.1.1.2.7.5.1.18 |
ocStbHostMpeg4ContentDecoderRestartsThe number of times the software driver restarted
the MPEG decoding process.ro Counter32 .1.3.6.1.4.1.4491.2.3.1.1.1.2.7.5.1.19 |
ocStbHostMpeg4ContainerFormatThe format of the container carrying
the MPEG4 video stream.ro VideoContainerFormat .1.3.6.1.4.1.4491.2.3.1.1.1.2.7.5.1.20 |
ocStbHostVc1ContentTableContains information associated to a VC-1
Program carried by an MPEG-2 or MPEG-4 transport stream.
This table will be expanded as VC-1 support is added
to the Host. SEQUENCE OF OcStbHostVc1ContentEntry .1.3.6.1.4.1.4491.2.3.1.1.1.2.7.6 |
ocStbHostVc1ContentEntryThe conceptual row for this table. OcStbHostVc1ContentEntry .1.3.6.1.4.1.4491.2.3.1.1.1.2.7.6.1 |
ocStbHostVc1ContentIndexThe unique identifier for the Vc1 Content entries in
this table. Unsigned32 .1.3.6.1.4.1.4491.2.3.1.1.1.2.7.6.1.1 |
ocStbHostVc1ContentProgramNumberThe program Number associated with active content within
the ocStbHost.ro Unsigned32 .1.3.6.1.4.1.4491.2.3.1.1.1.2.7.6.1.2 |
ocStbHostVc1ContainerFormatThe format of the transport carrying
the VC1 video stream.ro VideoContainerFormat .1.3.6.1.4.1.4491.2.3.1.1.1.2.7.6.1.20 |
ocStbHostQpskObjects OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.3.1.1.1.2.8 |
ocStbHostQpskFDCFreqThe frequency to which the QPSK receiver is currently tuned.ro Unsigned32 UNITS "hertz" .1.3.6.1.4.1.4491.2.3.1.1.1.2.8.1 |
ocStbHostQpskRDCFreqThe frequency to which the QPSK transmitter is currently tuned.ro Unsigned32 UNITS "hertz" .1.3.6.1.4.1.4491.2.3.1.1.1.2.8.2 |
ocStbHostQpskFDCBerThe rate at which bit errors are occurring based on the
number of data errors since the frequency has been locked.ro Enumeration .1.3.6.1.4.1.4491.2.3.1.1.1.2.8.3 |
ocStbHostQpskFDCStatusForward data channel lock status.ro Enumeration .1.3.6.1.4.1.4491.2.3.1.1.1.2.8.4 |
ocStbHostQpskFDCBytesReadThe number of bytes successfully read since the frequency
was locked.ro Unsigned32 .1.3.6.1.4.1.4491.2.3.1.1.1.2.8.5 |
ocStbHostQpskFDCPowerThe power level, in dBmV, of the forward data channel.ro TenthdBmV UNITS "dBmV" .1.3.6.1.4.1.4491.2.3.1.1.1.2.8.6 |
ocStbHostQpskFDCLockedTimeThe number of seconds that the current FDC frequency
has been locked.ro Unsigned32 UNITS "seconds" .1.3.6.1.4.1.4491.2.3.1.1.1.2.8.7 |
ocStbHostQpskFDCSNRThis object allows the manager to retrieve the
FDC SNR value (1/10 dB).ro TenthdB UNITS "dB" .1.3.6.1.4.1.4491.2.3.1.1.1.2.8.8 |
ocStbHostQpskAGCThis object allows the manager to retrieve the OOB channel
Automatic Gain Control value (%).ro Unsigned32 UNITS "percent" .1.3.6.1.4.1.4491.2.3.1.1.1.2.8.9 |
ocStbHostQpskRDCPowerThe power output level, in dBmV, of the QPSK transmitter.ro TenthdBmV UNITS "dBmV" .1.3.6.1.4.1.4491.2.3.1.1.1.2.8.10 |
ocStbHostQpskRDCDataRateThe data rate (in kbps) of the RDC.ro Enumeration .1.3.6.1.4.1.4491.2.3.1.1.1.2.8.11 |
ocStbHostEasObjects OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.3.1.1.1.3 |
ocStbHostEasCodes OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.3.1.1.1.3.1 |
ocStbEasMessageStateCodeThis object allows the manager to retrieve the
EAS State Code utilized by the STB. A
value of 0 indicates that the code is not
defined, thus the eSTB does not discriminate
any State Code defined in an EAS message.ro Unsigned32 .1.3.6.1.4.1.4491.2.3.1.1.1.3.1.1 |
ocStbEasMessageCountyCodeThis object allows the manager to retrieve the
EAS County Code utilized by the STB. A
value of 0 indicates that the code is not
defined, thus the eSTB ignores any County
Code defined in an EAS message.ro Unsigned32 .1.3.6.1.4.1.4491.2.3.1.1.1.3.1.2 |
ocStbEasMessageCountySubdivisionCodeThis object allows the manager to retrieve the
EAS County Sub Code utilized by the STB. A
value of 0 indicates that the code is not
defined, thus the eSTB ignores it and any County
Subdivision Code defined in an EAS message is accepted.ro Unsigned32 .1.3.6.1.4.1.4491.2.3.1.1.1.3.1.3 |
ocStbHostSecuritySubSystem OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.3.1.1.2 |
ocStbHostSecurityIdentifierThe security identifier of the ocStbHost.
This object represents the 40-bit Host_ID
obtained from the Host x509 certificate.rodeprecated SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.4491.2.3.1.1.2.2 |
ocStbHostCASystemIdentifierConditional access system identifier defined by DVB
and MPEG. This object represents the 16-bit CA_system_id
obtained from the ca_info_reply apdu. Only the first CAS ID
value (16-bits) from ca_info()will be reported.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.4491.2.3.1.1.2.3 |
ocStbHostCATypeThe Conditional Access (CA) supported by
the host device.
'other' means a CA which is not described by one of
the other enumerations in this list.
'embedded' means a vendor-specific embedded CA
'cablecard' means OpenCable CableCARD is supported.
'dcas' means software downloadable CA is
supported.ro Enumeration .1.3.6.1.4.1.4491.2.3.1.1.2.4 |
ocStbHostSoftware OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.3.1.1.3 |
ocStbHostDeviceSoftwareBase OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.3.1.1.3.1 |
ocStbHostSoftwareFirmwareVersionThe platform code software version currently operating in
this device. This object should be in the syntax used by
the individual vendor to identify software versions. The
device must return a string descriptive of the current
software load. This object is shared with
docsDevSwCurrentVers. For a monolithic download image,
this object has the same value as docsDevSwCurrentVers
on the eCM.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.4491.2.3.1.1.3.1.1 |
ocStbHostSoftwareOCAPVersionThis object returns a string indicating the latest version
of the OCAP profile supported by this device, e.g., '1.0'.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.4491.2.3.1.1.3.1.2 |
ocStbHostSoftwareFirmwareReleaseDateThis object returns release date of this entire firmware
image (the stack OS). The local time fields should be
set to zero and the timezone information omitted.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.4491.2.3.1.1.3.1.3 |
ocStbHostSoftwareBootloaderVersionThe platform code bootloader version currently operating
in this device. The bootloader is responsible for verifying
and starting the platform code software. This object should
be in the syntax used by the individual vendor to identify
software versions. The device must return a string
descriptive of the current software load.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.4491.2.3.1.1.3.1.4 |
ocStbHostFirmwareDownloadStatus OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.3.1.1.3.2 |
ocStbHostFirmwareImageStatusThis object details the image status recently downloaded
'imageAuthorized' means the image is valid.
'imageCorrupted' means the image is invalid.
'imageCertFailure' means CVC authentication has failed.
'imageMaxDownloadRetry' means the maximum number of code
file download retries has been reached. When the value of
this object is imageMaxDownloadRetry(4), the value of
ocStbHostSoftwareCodeDownloadStatus must be
downloadingFailed(3).
'imageMaxRebootRetry' means the maximum number of reboots
has occurred after code file download.ro Enumeration .1.3.6.1.4.1.4491.2.3.1.1.3.2.1 |
ocStbHostFirmwareCodeDownloadStatusThis object details the download status
of the target image.
'downloadingComplete' means the image download was
successful.
'downloadingFailed' means the image download failed.
'other' means a status not described by the other
enumerations.ro Enumeration .1.3.6.1.4.1.4491.2.3.1.1.3.2.2 |
ocStbHostFirmwareCodeObjectNameThe file name of the software image to be loaded into this
device. This object value may optionally contain server
and path information about the file name when applicable.
If unknown, the string '(unknown)' is returned. This
object is shared with docsDevSwFilename.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.4491.2.3.1.1.3.2.3 |
ocStbHostFirmwareDownloadFailedStatusThis object details the firmware download
failed status codes.
cdlError1, No Failure
cdlError2, Improper code file controls - CVC subject
organizationName for manufacturer does not match the
Host device manufacturer name
cdlError3, Improper code file controls - CVC subject
organizationName for code cosigning agent does not
match the Host device current code cosigning agent.
cdlError4, Improper code file controls - The
manufacturer's PKCS #7 signingTime value is equal-to
or less-than the codeAccessStart value currently held
in the Host device.
cdlError5, Improper code file controls - The
manufacturer's PKCS #7 validity start time value is
less-than the cvcAccessStart value currently held in
the Host device.
cdlError6, Improper code file controls - The manufacturer's
CVC validity start time is less-than the cvcAccessStart
value currently held in the Host device.
cdlError7, Improper code file controls - The manufacturer's
PKCS #7 signingTime value is less-than the CVC validity
start time.
cdlError8, Improper code file controls - Missing or
improper extendedKeyUsage extension in the
manufacturer CVC.
cdlError9, Improper code file controls - The cosigner's
PKCS #7 signingTime value is equal-to or less-than the
codeAccessStart value currently held in the
Host device.
cdlError10, Improper code file controls - The cosigner's
PKCS #7 validity start time value is less-than the
cvcAccessStart value currently held in the Host device.
cdlError11, Improper code file controls - The cosigner's
CVC validity start time is less-than the cvcAccessStart
value currently held in the Host device.
cdlError12, Improper code file controls - The cosigner's
PKCS #7 signingTime value is less-than the CVC validity
start time.
cdlError13, Improper code file controls - Missing or
improper extended key-usage extension in the cosigner's
CVC.
cdlError14, Code file manufacturer CVC validation failure.
cdlError15, Code file manufacturer CVS validation failure.
cdlError16, Code file cosigner CVC validation failure.
cdlError17, Code file cosigner CVS validation failure.
cdlError18, Improper eCM configuration file CVC format
(e.g., missing or improper key usage attribute).
cdlError19, eCM configuration file CVC validation failure.
cdlError20, Improper SNMP CVC format.
cdlError21, CVC subject organizationName for manufacturer
does not match the Host devices manufacturer name.
cdlError22, CVC subject organizationName for code cosigning
agent does not match the Host devices current code
cosigning agent.
cdlError23, The CVC validity start time is less-than or
equal-to the corresponding subject's cvcAccessStart
value currently held in the Host device.
cdlError24, Missing or improper key usage attribute.
cdlError25, SNMP CVC validation failure.
cdlError99, Other errors. Errors that do not fall into the
categories delineated above.ro Enumeration .1.3.6.1.4.1.4491.2.3.1.1.3.2.4 |
ocStbHostFirmwareDownloadFailedCountThis object details the number of times the product
attempted to download the firmware object defined by
ocStbHostFirmwareCodeObjectName. The value is reset when
the product attempts to download a new firmware object.ro Counter32 .1.3.6.1.4.1.4491.2.3.1.1.3.2.5 |
ocStbHostFirmwareDownloadGroupIdThis object specifies the Group Identifier. This is persistent.
The host may initiate a download if the group identifier in the
Common Download code version table matches this value. Downloads
can be triggered using the Common Download code version table
message for global upgrade of a group of similar hosts. The
Group Identifier is the same a group_id used in [CDL2]rw Unsigned32 .1.3.6.1.4.1.4491.2.3.1.1.3.2.6 |
ocStbHostSoftwareApplicationInfo OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.3.1.1.3.3 |
ocStbHostSoftwareApplicationInfoTableThis table allows the manager to display and retrieve
self-diagnostic software information of all available
applications. SEQUENCE OF OcStbHostSoftwareApplicationInfoEntry .1.3.6.1.4.1.4491.2.3.1.1.3.3.1 |
ocStbHostSoftwareApplicationInfoEntryAn entry exists for each available application. OcStbHostSoftwareApplicationInfoEntry .1.3.6.1.4.1.4491.2.3.1.1.3.3.1.1 |
ocStbHostSoftwareAppNameStringThe application's name string.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.4491.2.3.1.1.3.3.1.1.1 |
ocStbHostSoftwareAppVersionNumberThe application's version number.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.4491.2.3.1.1.3.3.1.1.2 |
ocStbHostSoftwareStatusThe software status of the application.ro Enumeration .1.3.6.1.4.1.4491.2.3.1.1.3.3.1.1.3 |
ocStbHostSoftwareApplicationInfoIndexTable Index added in this position (4) because it
replaced an external index. Unsigned32 .1.3.6.1.4.1.4491.2.3.1.1.3.3.1.1.4 |
ocStbHostSoftwareOrganizationIdOrganization ID captured in the XAIT or AIT.ro OCTET STRING .1.3.6.1.4.1.4491.2.3.1.1.3.3.1.1.5 |
ocStbHostSoftwareApplicationIdThis 16 bit field uniquely identifies the
application function as assigned by the
responsible/owning organization identified in
ocStbHostSoftwareOrganizationId.ro OCTET STRING .1.3.6.1.4.1.4491.2.3.1.1.3.3.1.1.6 |
ocStbHostSoftwareApplicationSigStatusThis field has been replaced by the leaf objects
ocStbHostSoftwareApplicationInfoSigLastReceivedTime and
ocStbHostSoftwareApplicationInfoSigLastReadStatus.rodeprecated Enumeration .1.3.6.1.4.1.4491.2.3.1.1.3.3.1.1.7 |
ocStbHostSoftwareApplicationPriorityThis field represents the priority of the application as
signaled in the AIT or XAIT. In those tables the value
is 8 bits unsigned. The least significant 8 bits of this
field is used to contain the priority value
from signaling.ro Unsigned32 .1.3.6.1.4.1.4491.2.3.1.1.3.3.1.1.8 |
ocStbHostSoftwareApplicationInfoSigLastReceivedTimeIndicates the last time an XAIT was received from the
network that was not the same version as already in-use.
If the host device has not received an XAIT, then this
returns a date and time of all zeros.
- This must be updated ONLY when an XAIT is received
from the network (e.g., not when loaded from persistent
storage).
- This must NOT be updated if an XAIT is received that
has a version the same as the currently in-use version,
UNLESS the in-use XAIT was loaded from persistent storage
AND it is the FIRST time receiving an XAIT from the network
without error.
- This must NOT be updated if XAIT is received with a
status of error(2).
- This must be updated each time an XAIT is received for
resulting in a status of okayButRejected(3).
- This must be updated if an XAIT is received from the
network resulting in a status of okay(1) AND its version
is different than the currently in-use
version.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.4491.2.3.1.1.3.3.2 |
ocStbHostSoftwareApplicationInfoSigLastReadStatusIndicates the status of the last attempted read of the
XAIT from the network that was not the same version as
already in use except as noted below. Reports unknown(0)
if no XAIT has been received. A value of okayButRejected
means it was read without errors, but the monitor application
has rejected it.
- This must be updated ONLY when an XAIT is received
from the network (e.g., not when loaded from persistent
storage).
- This must NOT be updated if an XAIT is received that has
a version equal to the currently in-use version, UNLESS
the in-use XAIT was loaded from persistent storage AND
it is the FIRST time receiving an XAIT from the network
without error.
- The value of unknown(0) must be the initial value before
any XAIT is ever received from the network.
- This must NOT be set to unknown(0) if it has ever been set
to another value.ro Enumeration .1.3.6.1.4.1.4491.2.3.1.1.3.3.3 |
ocStbHostSoftwareApplicationInfoSigLastNetworkVersionReadThe version number of the XAIT that was last read
successfully from the network, but not necessarily
accepted by the monitor app. (LastReadStatus of okay
or okayButRejected.) The version within the XAIT is
a 5-bit unsigned integer (range 0..31), but if no XAIT
has been read from the network, the value reported must
be -1. (NOTE: Technically, each section has its own
version number; however, they are required to all be the
same, so this may be extracted from the first section.)
If this is -1 and VersionInUse is not -1, it can be
inferred that the version in use was loaded from
persistent storage; however, if both versions are the
same, it cannot be inferred that the initially used XAIT
did not come from persistent storage.ro Integer32 (-1, 0..31) .1.3.6.1.4.1.4491.2.3.1.1.3.3.4 |
ocStbHostSoftwareApplicationInfoSigVersionInUseThe version number of the XAIT that is in use, which may
have been read from the network or from persistent storage.
The version within the XAIT is a 5-bit unsigned integer
(range 0..31), but if no XAIT has been read from the network,
the value reported must be -1. (NOTE: Technically, each
section has its own version number; however, they are required
to all be the same, so this may be extracted from the first
section.) If this is not -1 and LastVersionHeard is -1, it
can be inferred that the version in use was loaded from
persistent storage; however, if both versions are the
same, it cannot be inferred that the initially used XAIT
did not come from persistent storage.ro Integer32 (-1, 0..31) .1.3.6.1.4.1.4491.2.3.1.1.3.3.5 |
ocStbHostStatus OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.3.1.1.4 |
ocStbHostPower OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.3.1.1.4.1 |
ocStbHostPowerStatusIndicates the current power status of the ocStbHost.ro Enumeration .1.3.6.1.4.1.4491.2.3.1.1.4.1.1 |
ocStbHostAcOutletStatusIndicates the AC accessory power outlet status of the
ocStbHost.
'unSwitched'
Indicates AC accessory power outlet is present and provides
power as long as the ocStbHost is connected to a powered AC
outlet.
'switchedOn'
Indicates the AC accessory power outlet is currently
switched to ON and provides power as long as the value of
ocStbHostPowerStatus is 'powerOn'.
'switchedOff'
Indicates the AC accessory power outlet is currently
switched to OFF and does not provide power.
'notInstalled'
Indicates no AC accessory power outlet is present in the
ocStbHost.ro Enumeration .1.3.6.1.4.1.4491.2.3.1.1.4.1.2 |
ocStbHostUserSettings OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.3.1.1.4.2 |
ocStbHostUserSettingsPreferedLanguageThe preferred language of the audio streams indicated
as the 3-octet code specified in ISO 639-2.ro DisplayString .1.3.6.1.4.1.4491.2.3.1.1.4.2.1 |
ocStbHostSystemObjects OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.3.1.1.4.3 |
ocStbHostSystemTempTableThis table contains the temperature sensors of the
ocStbHost. SEQUENCE OF OcStbHostSystemTempEntry .1.3.6.1.4.1.4491.2.3.1.1.4.3.1 |
ocStbHostSystemTempEntryConceptual row of a temperature sensor device associated
with a Host Resource device (e.g. DVR) of the ocStbHost. OcStbHostSystemTempEntry .1.3.6.1.4.1.4491.2.3.1.1.4.3.1.1 |
ocStbHostSystemTempIndexThe identifier of the temperature sensor for the
corresponding hrDeviceIdx. Unsigned32 .1.3.6.1.4.1.4491.2.3.1.1.4.3.1.1.1 |
ocStbHostSystemTempDescrThe text containing information about the temperature
sensor.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.4491.2.3.1.1.4.3.1.1.2 |
ocStbHostSystemTempValueThe temperature measured by the sensor.
If the temperature sensor does not report a
value, this object indicates a value of 0.ro Integer32 UNITS "celsius" .1.3.6.1.4.1.4491.2.3.1.1.4.3.1.1.3 |
ocStbHostSystemTempLastUpdateThe value of sysUpTime of the last time this value
was measured by the ocStbHost.
A value 0 means the temperature value is invalid.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.4491.2.3.1.1.4.3.1.1.4 |
ocStbHostSystemTempMaxValueThe maximum temperature measured by the sensor.
If the temperature sensor does not report a
value, this object indicates a value of 0.ro Integer32 UNITS "celsius" .1.3.6.1.4.1.4491.2.3.1.1.4.3.1.1.5 |
ocStbHostSystemHomeNetworkTableThis table contains info about Home Network Clients
connected to the ocStbHost.deprecated SEQUENCE OF OcStbHostSystemHomeNetworkEntry .1.3.6.1.4.1.4491.2.3.1.1.4.3.2 |
ocStbHostSystemHomeNetworkEntryConceptual row of a Home Network device ocStbHost
support/status.deprecated OcStbHostSystemHomeNetworkEntry .1.3.6.1.4.1.4491.2.3.1.1.4.3.2.1 |
ocStbHostSystemHomeNetworkIndexThe identifier of the Home network Client connected
to the ocStbHost.deprecated Unsigned32 .1.3.6.1.4.1.4491.2.3.1.1.4.3.2.1.1 |
ocStbHostSystemHomeNetworkMaxClientsMaximum number of clients the Host can support.
NOTE: If the Host does not support home network clients,
then it SHALL report 0x00.rodeprecated Integer32 .1.3.6.1.4.1.4491.2.3.1.1.4.3.2.1.2 |
ocStbHostSystemHomeNetworkHostDRMStatusThe ocStbHost support for Digital Right Management (DRM).rodeprecated Enumeration .1.3.6.1.4.1.4491.2.3.1.1.4.3.2.1.3 |
ocStbHostSystemHomeNetworkConnectedClientsThe number of Home Network Clients currently connected
to the ocStbHost.rodeprecated Integer32 .1.3.6.1.4.1.4491.2.3.1.1.4.3.2.1.4 |
ocStbHostSystemHomeNetworkClientMacAddressThe MAC address of Home Network Client.rodeprecated MacAddress (SNMPv2-TC) .1.3.6.1.4.1.4491.2.3.1.1.4.3.2.1.5 |
ocStbHostSystemHomeNetworkClientIpAddressThe Ip address of Home Network Client.rodeprecated InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.4491.2.3.1.1.4.3.2.1.6 |
ocStbHostSystemHomeNetworkClientDRMStatusThe Home Network Clients support for Digital
Rights Management (DRM).rodeprecated Integer32 .1.3.6.1.4.1.4491.2.3.1.1.4.3.2.1.7 |
ocStbHostSystemMemoryReportTableThis table contains the Id of each memory type
reported by the ocStbHost. SEQUENCE OF OcStbHostSystemMemoryReportEntry .1.3.6.1.4.1.4491.2.3.1.1.4.3.3 |
ocStbHostSystemMemoryReportEntryConceptual row of a memory type reported
by the ocStbHost. OcStbHostSystemMemoryReportEntry .1.3.6.1.4.1.4491.2.3.1.1.4.3.3.1 |
ocStbHostSystemMemoryReportIndexThe identifier of the memory type. Unsigned32 .1.3.6.1.4.1.4491.2.3.1.1.4.3.3.1.1 |
ocStbHostSystemMemoryReportMemoryTypeDesignates the type of memory that is being reported.ro Enumeration .1.3.6.1.4.1.4491.2.3.1.1.4.3.3.1.2 |
ocStbHostSystemMemoryReportMemorySizeDesignates the physical size of the reported memory type.
The units are kilobytes, defined to be 1,024 bytes.ro Integer32 UNITS "kilobytes" .1.3.6.1.4.1.4491.2.3.1.1.4.3.3.1.3 |
ocStbHostSystemDriveInfoTableThis table contains information about each storage device
that is not an onboard storage such as DRAM. This table is
optional unless a solid state drive is present, e.g., USB
Flash Drive. When a solid state drive is present this table
SHALL include an entry describing the drive. Presence of a
solid state drive is determined by the
ocStbHostSystemMemoryReportMemoryType value. SEQUENCE OF OcStbHostSystemDriveInfoEntry .1.3.6.1.4.1.4491.2.3.1.1.4.3.4 |
ocStbHostSystemDriveInfoEntryConceptual row of a drive info reported by the ocStbHost. OcStbHostSystemDriveInfoEntry .1.3.6.1.4.1.4491.2.3.1.1.4.3.4.1 |
ocStbHostSystemDriveInfoIndexAn index that is unique for each drive info entry.ro Integer32 .1.3.6.1.4.1.4491.2.3.1.1.4.3.4.1.1 |
ocStbHostSystemDriveInfoVendorIdA string representing the drive vendor identifier. If a
vendor identifier cannot be read from the drive then the
value of 'unknown' SHALL be used for this value.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.4491.2.3.1.1.4.3.4.1.2 |
ocStbHostSystemDriveInfoProductIdA string representing the drive product identifier. If a
Product identifier cannot be read from the drive, then the
value of 'unknown' SHALL be used for this value.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.4491.2.3.1.1.4.3.4.1.3 |
ocStbHostSystemDriveInfoSerialNumberA string representing the serial number. If a serial
number cannot be read from the drive, then the value of
'unknown' SHALL be used for this value.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.4491.2.3.1.1.4.3.4.1.4 |
ocStbHostSystemDriveInfoInterfaceTypeDesignates the type of drive interface.ro Enumeration .1.3.6.1.4.1.4491.2.3.1.1.4.3.4.1.5 |
ocStbHostSystemLogging OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.3.1.1.4.3.5 |
ocStbHostSystemLoggingControlResetSetting this object to resetLog(1) empties the logging
table. Setting this object to pauseLog(2) causes the
Host to stop writing events to the logging table. Setting
this object to startLog(3) causes the Host to start writing
events to the logging table. Reading this object returns
either pauseLog(2) or startLog(3). The default is
startLog(3). Log event pausing is independent of any other
log filtering mechanisms, e.g., levels. Setting it to
useDefaultReporting(4) resets the log (i.e., empties) and
returns all event levels to the factory-default reporting.rw Enumeration .1.3.6.1.4.1.4491.2.3.1.1.4.3.5.1 |
ocStbHostSystemLoggingSizeSetting this object modifies the size of the system
logging table. When set to zero, all entries are removed
and new entries are not allowed to be added. When set
less than the current size, the oldest entries are removed
until the new size is reached.rw INTEGER .1.3.6.1.4.1.4491.2.3.1.1.4.3.5.2 |
ocStbHostSystemLoggingLevelControlThe current logging priority level for system messages.
Setting a level sets all levels from the level specified
to the highest severity level except for OFF.
The level ALL indicates all levels. The log levels
are derived from the log4j class.
all(1) The all level has the lowest possible rank and is intended
to turn on all logging.
trace(2) The trace level designates finer-grained
informational events than the DEBUG (see log4j class
for further definition).
debug(3) The debug level designates fine-grained
informational events that are most useful to debug
an application.
info(4) The info level designates informational messages
that highlight the progress of the application at
coarse-grained level.
warn(5) The warn level designates potentially harmful
situations.
error(6) The error level designates error events that might
still allow the application to continue running.
fatal(7) The fatal level designates very severe error
events that will presumably lead the application
to abort.
off(8) The off has the highest possible rank and is
intended to turn off logging.rw Enumeration .1.3.6.1.4.1.4491.2.3.1.1.4.3.5.3 |
ocStbHostSystemloggingGroupControlThe system 'group' or 'groups' to be logged.
If all(1) is set, then other bits are
ignored. If set to 'none(0)', messages that do not include
a 'group' are candidates to be logged.rw Bits .1.3.6.1.4.1.4491.2.3.1.1.4.3.5.4 |
ocStbHostSystemLoggingEventTableThis table is a cyclic table of events. SEQUENCE OF OcStbHostSystemLoggingEventEntry .1.3.6.1.4.1.4491.2.3.1.1.4.3.5.5 |
ocStbHostSystemLoggingEventEntryA logging event entry. OcStbHostSystemLoggingEventEntry .1.3.6.1.4.1.4491.2.3.1.1.4.3.5.5.1 |
ocStbHostSystemLoggingEventIndexProvides relative ordering of the objects in the event
log. This object will always increase except when
(a) the log is reset via
ocStbHostSystemLoggingEventControlReset,
(b) the device reboots and does not implement
non-volatile storage for this log, or
(c) it reaches the value 2^31. The next entry for
all the above cases is 1. Integer32 .1.3.6.1.4.1.4491.2.3.1.1.4.3.5.5.1.1 |
ocStbHostSystemLoggingEventTimeStampThe time stamp of this event logging entry. The timestamp
is established when the event occurs. The value is the
number of milli-seconds from Jan 1 1970
converted to a string.ro OCTET STRING .1.3.6.1.4.1.4491.2.3.1.1.4.3.5.5.1.2 |
ocStbHostSystemLoggingEventMessageThe event message.ro SnmpAdminString .1.3.6.1.4.1.4491.2.3.1.1.4.3.5.5.1.3 |
ocStbCardInfo OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.3.1.1.4.4 |
ocStbHostCardMacAddressThe Mac Address associated with the Card.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.4491.2.3.1.1.4.4.1 |
ocStbHostCardIpAddressTypeThe network address Type of ocStbHostCardIpAddress.
If the Host does not have the Card's IP address (e.g.,
the Card has not opened an IP Unicast Flow, which would
require the Host to obtain the Card's IP address, thus
providing the Host with knowledge of the Card's IP address
type), then the Host replies with a value of unknown (0).ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.4491.2.3.1.1.4.4.2 |
ocStbHostCardIpAddressThe network address of the Card. If the Host does not
have the Card's IP address (e.g., the Card has not opened
an IP Unicast Flow, which would require the Host to obtain
the Card's IP address, thus providing the Host with
knowledge of the Card's IP address), then the Host replies
with a value of zero (00).ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.4491.2.3.1.1.4.4.3 |
ocStbHostCCMMI OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.3.1.1.4.4.5 |
ocStbHostCCApplications OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.3.1.1.4.4.5.1 |
ocStbHostCCAppInfoTableThis table allows the manager to retrieve
the HTML pages for Card applications retrieved by the
Host using the Application Info resource. SEQUENCE OF OcStbHostCCAppInfoEntry .1.3.6.1.4.1.4491.2.3.1.1.4.4.5.1.1 |
ocStbHostCCAppInfoEntryThe conceptual row for this table. OcStbHostCCAppInfoEntry .1.3.6.1.4.1.4491.2.3.1.1.4.4.5.1.1.1 |
ocStbHostCCAppInfoIndexThis object was the index for this table
in a previous version of the MIB.
Currently used only as a placeholder to
avoid changing OID values.ro Unsigned32 .1.3.6.1.4.1.4491.2.3.1.1.4.4.5.1.1.1.1 |
ocStbHostCCApplicationTypeIndex for this table.
Contains the application_type field
in the application_info_cnf() APDU.ro Unsigned32 .1.3.6.1.4.1.4491.2.3.1.1.4.4.5.1.1.1.2 |
ocStbHostCCApplicationNameContains the application name.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.4491.2.3.1.1.4.4.5.1.1.1.3 |
ocStbHostCCApplicationVersionContains the application version.ro Unsigned32 .1.3.6.1.4.1.4491.2.3.1.1.4.4.5.1.1.1.4 |
ocStbHostCCAppInfoPageAll HTML data for this application.
If a 'page' as reported from the Card contains
links, the links shall be traversed, and all
HTML from each page traversed shall be included
in a single, valid HTML string (with per-page
start/end HTML and BODY tags removed). The resulting
HTML SHOULD be structured as an HTML table
consisting of one column, with one row for each
'page' from the Card. If the full HTML from the
application (all pages concatenated) will not fit
within the SNMP buffer, text indicating this
SHALL follow the table; otherwise nothing except
the close BODY and HTML tags SHOULD follow the table.ro OCTET STRING .1.3.6.1.4.1.4491.2.3.1.1.4.4.5.1.1.1.5 |
ocStbHostSnmpProxyInfo OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.3.1.1.4.4.6 |
ocStbHostCardMfgIdThe two-byte manufacturer identifier
acquired from the CableCard. The high order byte
defines the manufacturer as follows.
00xx = Motorola
01xx = Cisco (Scientific-Atlanta)
02xx = NDS
03xx = Conax
04xx = Nagravision
This can be used with version and root OID to enable
SNMP access to proprietary CC diagnostic information.
The lower order octet can be used to privately identify
product generation and derivatives.ro OCTET STRING .1.3.6.1.4.1.4491.2.3.1.1.4.4.6.1 |
ocStbHostCardVersionThe version of the CableCard. This can be used with
manufacturer and root OID to enable SNMP access to
proprietary diagnostic information.ro OCTET STRING .1.3.6.1.4.1.4491.2.3.1.1.4.4.6.2 |
ocStbHostCardRootOidAn ASN.1 encoding of the root OID of the
CableCARD MIB defined in the CC Manufacturers private
MIB name space. This OID will be compared against each
object identifier in the VARBIND contained within the
GetRequests, GetNextRequests, GetBulkRequests, and
SetRequests received by the Host2.x if the objects are not
in the Host2.x MIB. A match of OIDs root requires the Host
to send a corresponding request to the Card. A 0.0 value
explicitly states the Card does not support SNMP message
processing.ro OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.3.1.1.4.4.6.3 |
ocStbHostCardSerialNumberSerial Number of CableCARD.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.4491.2.3.1.1.4.4.6.4 |
ocStbHostCardSnmpAccessControlThis object allows the manager to control access to the
Card's MIB via networked devices (e.g., get/set by network
attached managers). It has no impact on local
access (e.g., application get/set of Card MIB objects).
When set to TRUE, the Host is permitted to forward
SNMP messages received on the WAN/LAN interface addressed
to the OID of the Card subtree.
When set to FALSE, the Host must discard and not forward
to the Card any SNMP messages received on the WAN/LAN
interface addressed to the OID of the Card subtree.
Default of this object is TRUE.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4491.2.3.1.1.4.4.6.5 |
ocStbHostCardIdAllows the manager to retrieve the 40 least-significant
Bits of the CableCARD ID in the string
format indicated below:
M-MMU-UUU-UUU-UUL
Where:
M-MM is the decimal representation of the
10-bit CHICA assigned manufacturer number.
U-UUU-UUU-UU is the decimal representation
of the 30-bit manufacturer assigned unit number.
L is a Luhn check digit calculated over the
preceding 12 decimal digits.
If the Card ID is unknown, then the string shall
be all zeros e.g., '0-000-000-000-000'.ro DisplayString .1.3.6.1.4.1.4491.2.3.1.1.4.4.7 |
ocStbHostCardBindingStatusThe status of CableCARD/Host mutual authentication
and binding.
'unknown' means the binding state has not been determined.
For example, mutual authentication may not have
commenced or may be in process.
'invalidCertificate' means the Host failed to establish
device certificate authenticity.
'otherAuthFailure' corresponds to other failures in
establishing mutual authentication.
'bound' indicates that mutual authentication has succeeded
and CableCARD and Host are bound successfully.ro Enumeration .1.3.6.1.4.1.4491.2.3.1.1.4.4.8 |
ocStbHostCardOpenedGenericResourceThe hexadecimal representation of the generic feature
control resource number opened using a profile
reply() APDU resource_identifier field. The
possible values are defined in the [CCIF]
specification.ro OCTET STRING .1.3.6.1.4.1.4491.2.3.1.1.4.4.9 |
ocStbHostCardTimeZoneOffsetDecimal value of the UTC offset taken from the
feature_parameters() APDU for feature_id =5 where
possible values are defined in the [CCIF]
specification.ro INTEGER(-12..12) .1.3.6.1.4.1.4491.2.3.1.1.4.4.10 |
ocStbHostCardDaylightSavingsTimeDeltaDecimal value of the daylight savings delta.
A 0x00 should be returned if the Card does not
support this feature or if there is no delta.
The ambiguity may be resolved by querying
ocStbHostCardDaylightSavingsTimeEntry object.ro OCTET STRING .1.3.6.1.4.1.4491.2.3.1.1.4.4.11 |
ocStbHostCardDaylightSavingsTimeEntryDaylight savings entry time given as time lapsed
since 12 AM Jan 6, 1980, in units of GPS seconds.
All zeros should be returned if the Card does not
support this feature.ro Unsigned32 .1.3.6.1.4.1.4491.2.3.1.1.4.4.12 |
ocStbHostCardDaylightSavingsTimeExitDaylight savings exit time given as time lapsed
since 12 AM Jan 6, 1980, in units of GPS seconds.
All zeros should be returned if the Card does not
support this feature.ro Unsigned32 .1.3.6.1.4.1.4491.2.3.1.1.4.4.13 |
ocStbHostCardEaLocationCodeContains the EA location codes as defined
in American National Standard, J-STD-042.
The bits corresponding to ANSI EA location codes
are indicated below:
SSSSSSSS-DDDD-xx-CCCCCCCCCC
Where:
SSSSSSSS is An 8-bit unsigned number in the
range 0 to 99 that represents the State or
Territory affected by the emergency alert.
DDDD is A 4-bit number in the range 0 to 9
that defines county subdivisions.
xx is reserved
CCCCCCCCCC is 10-bit number between 0 to 999
that identifies a county within a state.
If the EA_Location code is unknown, then the string shall
be all zeros e.g., '000000'.ro OCTET STRING .1.3.6.1.4.1.4491.2.3.1.1.4.4.14 |
ocStbHostCardVctIdDisplay the VTC-ID if supported. If not supported
then return 0x0000.ro OCTET STRING .1.3.6.1.4.1.4491.2.3.1.1.4.4.15 |
ocStbHostCardCpInfo OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.3.1.1.4.4.16 |
ocStbHostCardCpAuthKeyStatusThis parameter SHALL be set to 'Ready' if the
Card has requested the host's authentication
key via the APDU CP_data_req() with a
Datatype_id = 22. This parameter SHALL be set
to 'Not Ready' if the Cablecard has NOT
requested the authentication key.ro Enumeration .1.3.6.1.4.1.4491.2.3.1.1.4.4.16.1 |
ocStbHostCardCpCertificateCheckDisplay the results of the Card_DevCert verification
as defined in the OpenCable CableCard Copy Protection
Specification.ro Enumeration .1.3.6.1.4.1.4491.2.3.1.1.4.4.16.2 |
ocStbHostCardCpCciChallengeCountDisplay the Card CCI Challenge message
count [CCCP] since the
last boot or reset.ro Counter32 .1.3.6.1.4.1.4491.2.3.1.1.4.4.16.3 |
ocStbHostCardCpKeyGenerationReqCountDisplay the Copy Protection Key Generation
Request count [CCCP] since
the last boot or reset.ro Counter32 .1.3.6.1.4.1.4491.2.3.1.1.4.4.16.4 |
ocStbHostCardCpIdListDisplay the CP_system_id_bitmask field of the
APDU CP_open_cnf() as defined in the CableCARD Copy
Protection Specification Section 11.3.1.2.ro OCTET STRING .1.3.6.1.4.1.4491.2.3.1.1.4.4.16.5 |
ocStbHostInfo OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.3.1.1.4.5 |
ocStbHostIpAddressTypeThis object was the address type for ocStbHostIpAddress,
which was never implemented in a previous version of the
MIB. Currently used only as a placeholder to avoid
changing OID values.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.4491.2.3.1.1.4.5.1 |
ocStbHostIpSubNetMaskThe IP subnet mask of the Host address.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.4491.2.3.1.1.4.5.2 |
ocStbHostOobMessageModeOut of Band Messaging communications mode currently
employed by the Host2.x.ro Enumeration .1.3.6.1.4.1.4491.2.3.1.1.4.5.3 |
ocStbHostDumpTrapInfo OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.3.1.1.4.5.4 |
ocStbHostDumpEventCountThe number of times the host should notify the headend(s)
of a dump condition (e.g., stack dumps after boot).
When an exception occurs, if ocStbHostDumpEventCount is
non-zero, the host will send the notification to each
defined notification receiver and decrement
ocStbHostDumpEventCount. A non-zero count arms the trap.
No trap will be sent if the value is 0.rw INTEGER .1.3.6.1.4.1.4491.2.3.1.1.4.5.4.1 |
ocStbHostDumpNowTrue(1) forces an immediate dump of a component of the
Host. The Host will prepare the dump file then send the
Notification-PDU to the headend. This simulates
the manufacturer-defined event that would cause a dump.
Reading this object returns false(2).rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4491.2.3.1.1.4.5.4.2 |
ocStbHostDumpEventTimeoutThe time, in seconds, after a SNMPv2-Trap-PDU has been sent
to the headend that the Host will wait before abandoning
the dump transfer. If the Host does not receive a TFTP Get
from the headend within this timeout period, it will
proceed with the manufacturer-defined recovery process
from the condition that caused the dump. The intent is to
prevent the Host from waiting indefinitely for a TFTP
session to enable the dump transfer. The timer should be
ignored if the Host receives a TFTP GET from the headend
within the timeout period. The default timeout value
is 5 seconds.rw Unsigned32 .1.3.6.1.4.1.4491.2.3.1.1.4.5.4.3 |
ocStbHostDumpFilePathDump file path and name.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.4491.2.3.1.1.4.5.4.4 |
ocStbHostSpecificationsInfo OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.3.1.1.4.5.5 |
ocStbHostCfrSpecificationIssueThe Host CFR version implemented in this
device (e.g., OC-SP-HOST2.1-CFR-I06-081114).ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.4491.2.3.1.1.4.5.5.1 |
ocStbHostMibSpecificationIssueThe version implemented in this device
(e.g., OC-SP-MIB-HOST2.X-I05-081114).ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.4491.2.3.1.1.4.5.5.2 |
ocStbHostBootStatusDefines the current status of the host during or after
boot process.ro Enumeration .1.3.6.1.4.1.4491.2.3.1.1.4.5.6 |
ocStbHostContentErrorSummaryInfo OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.3.1.1.4.5.7 |
ocStbHostPatTimeoutCountThese values increment every time a PAT timeout
condition has occurred since the last boot or reset.rw Counter32 .1.3.6.1.4.1.4491.2.3.1.1.4.5.7.1 |
ocStbHostPmtTimeoutCountThese values increment every time a PMT timeout
condition has occurred since the last boot or reset.rw Counter32 .1.3.6.1.4.1.4491.2.3.1.1.4.5.7.2 |
ocStbHostOobCarouselTimeoutCountThese values increment each time an implementation
specific OOB Carousel timeout has occurred since the last
boot or reset.rw Counter32 .1.3.6.1.4.1.4491.2.3.1.1.4.5.7.3 |
ocStbHostInbandCarouselTimeoutCountThese values increment each time an implementation
specific Inband Carousel timeout has occurred since the
last boot or reset.rw Counter32 .1.3.6.1.4.1.4491.2.3.1.1.4.5.7.4 |
ocStbHostRebootInfo OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.3.1.1.4.6 |
ocStbHostRebootTypeDescribes the type of reboot that occurred the last time
the host device rebooted.
Unknown(0), unknown reboot. 0 is used as a sentinel value
to denote that the reboot reporting mechanism is
initialized and ready for use. If it appears in a reboot
report as a reboot reason, it means that something
(of unknown cause) prevented a reboot reason from being
saved. This is a spontaneous reboot.
Davic/DOCSIS(1), Davic/DOCSIS switch. The set-top rebooted
because the network switched from Davic to DOCSIS or
vice versa. This is a controlled reboot.
User(2), User reboot. The set-top rebooted at the specific
request of the user, typically the MSO, but can also be the
subscriber. Includes, but not limited to, headend-initiated
reboots, pass-thru and SNMP messages to reboot, new
application versions that require a reboot in order to
reload, the staging toolkit, hard disk re-format requests,
CableCARD inserted or firmware upgrade, and more.
This is a controlled reboot.
System(3), System reboot. The set-top rebooted because its
software determined it cannot continue operation. This can
be due to any number of reasons, including: detection of
logic errors, exhaustion of various system resources,
detection of memory corruption, and more. This is a
spontaneous reboot.
Trap(4), Trap reboot. A fatal error detected by the CPU.
This varies between CPU manufacturers; some possible causes
are illegal address references, misaligned instruction or
data access, memory protection violations, attempt to
decode an unrecognized instruction, etc. This is a
spontaneous reboot.
Silent or Watchdog(5). Depending on platform, this is
either a Silent Reboot (A reboot of unknown origin that
reports no information) or a Watchdog reboot. This is a
spontaneous reboot.
Bootloader(6), Bootloader reboot. For use by bootloader
software. This is a spontaneous reboot.
PowerUp(7), Power-up reboot. The set-top rebooted because
power was lost and then restored. This is a controlled
reboot.
Upgrade(8), Upgrade Reboot due to loading new resident
set-top software. This is a controlled reboot.
Hardware(9), Hardware Reset reboot. This depends on the
design of a particular set-top. It might be due to a
hardware reset line being triggered or by a button push of
some kind. Manufacturers sometimes provide a way to
hard reset a box besides removing power. This is a
spontaneous reboot.
CablecardError(10), CablecardError. The Host rebooted
because the communication with the CableCARD was lost and
could not be reestablished.ro Enumeration .1.3.6.1.4.1.4491.2.3.1.1.4.6.1 |
ocStbHostRebootResetSetting this object to true(1) causes the device to reset,
equivalent to a power reset. Reading this object always
returns false(2).rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4491.2.3.1.1.4.6.2 |
ocStbHostRebootIpModeTlvChangeSetting this object to ignore(1) causes the eSTB to ignore
the IP mode TLV when received during normal operation
(e.g., when only the eCM is reset). The operator can then
schedule a Host reset at a less disruptive time.
When set to immediate(2), an IP Mode TLV change will result
in an immediate reset and disrupt all current Host
activity. The value of this object is persistent.rw Enumeration .1.3.6.1.4.1.4491.2.3.1.1.4.6.3 |
ocStbHostMemoryInfo OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.3.1.1.4.7 |
ocStbHostLargestAvailableBlockThe largest available continuous block of DRAM available
on the host device, in kilobytes.ro Integer32 UNITS "kilobytes" .1.3.6.1.4.1.4491.2.3.1.1.4.7.1 |
ocStbHostTotalVideoMemoryThe total amount of DRAM dedicated to video decoding and
display on the host device, in kilobytes.ro Integer32 UNITS "kilobytes" .1.3.6.1.4.1.4491.2.3.1.1.4.7.2 |
ocStbHostAvailableVideoMemoryThe total amount of DRAM dedicated to video decoding and
display on the host device that is not allocated and
available for use, in kilobytes.ro Integer32 UNITS "kilobytes" .1.3.6.1.4.1.4491.2.3.1.1.4.7.3 |
ocStbHostTotalSystemMemoryThe total amount of DRAM dedicated to system use, in
kilobytes. System memory does not include video memory
or any JVM memory including heap, thread stack, etc.ro Integer32 UNITS "kilobytes" .1.3.6.1.4.1.4491.2.3.1.1.4.7.4 |
ocStbHostAvailableSystemMemoryThe total amount of DRAM dedicated to system use that
is not allocated and available for use, in kilobytes.ro Integer32 UNITS "kilobytes" .1.3.6.1.4.1.4491.2.3.1.1.4.7.5 |
ocStbHostJVMInfo OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.3.1.1.4.8 |
ocStbHostJVMHeapSizeThe total amount of DRAM allocated to the Java Virtual
Machine heap. The units are kilobytes, defined to be
1,024 bytes.ro Integer32 UNITS "kilobytes" .1.3.6.1.4.1.4491.2.3.1.1.4.8.1 |
ocStbHostJVMAvailHeapThe amount of DRAM in the Java Virtual Machine heap that
is not allocated and is available for use.
The units are kilobytes, defined to be 1,024 bytes.ro Integer32 UNITS "kilobytes" .1.3.6.1.4.1.4491.2.3.1.1.4.8.2 |
ocStbHostJVMLiveObjectsThe number of active object instances in the Java Virtual
Machine that are reachable from running code.ro Integer32 .1.3.6.1.4.1.4491.2.3.1.1.4.8.3 |
ocStbHostJVMDeadObjectsThe number of object instances in the Java Virtual Machine
that are NOT reachable from running Code.ro Integer32 .1.3.6.1.4.1.4491.2.3.1.1.4.8.4 |
ocStbHostConformance OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.3.1.2 |
ocStbHostMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.3.1.2.1 |
ocStbHostMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.3.1.2.2 |