DOCS-RPHY-MIB
This MIB module contains the management objects for the Remote PHY Device (RPD) management. Copyright 2016-2017 Cable Television Laboratories, Inc. All rights reserved.
Main OID:
docsRphyMib.1.3.6.1.4.1.4491.2.1.30
381
Objects
Active
Status
15
Dependencies
Imported Objects
Objects
381 total| Object Name |
|---|
docsRphyMibThis MIB module contains the management objects for
the Remote PHY Device (RPD) management.
Copyright 2016-2017 Cable Television Laboratories, Inc.
All rights reserved. MODULE-IDENTITY .1.3.6.1.4.1.4491.2.1.30 |
docsRphyNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.1.30.0 |
docsRphyObjects OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.1.30.1 |
docsRphyRpdDevMibObjects OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.1.30.1.1 |
docsRphyRpdDevInfoTableThis table identifies the RPD for which the details
and statistics are being provided. SEQUENCE OF DocsRphyRpdDevInfoEntry .1.3.6.1.4.1.4491.2.1.30.1.1.1 |
docsRphyRpdDevInfoEntryThe conceptual row of docsRphyRpdDevInfoTable. DocsRphyRpdDevInfoEntry .1.3.6.1.4.1.4491.2.1.30.1.1.1.1 |
docsRphyRpdDevInfoUniqueIdThis attribute specifies a globally unique 6-byte
identifier for the RPD. By convention, an RPD SHOULD use
the MAC address of the lowest numbered Ethernet port
facing the CIN. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.4491.2.1.30.1.1.1.1.1 |
docsRphyRpdDevInfoSysUpTimeThis attribute is the time (in hundredths of a second)
since the RPD was last re-initialized. This value is
reported by the RPD.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.4491.2.1.30.1.1.1.1.2 |
docsRphyRpdDevInfoNumCrashFilesAvailThis attribute provides the number of crash files.ro Unsigned32 .1.3.6.1.4.1.4491.2.1.30.1.1.1.1.3 |
docsRphyRpdDevIdentificationTableThis table provides data that uniquely identifies the RPD. SEQUENCE OF DocsRphyRpdDevIdentificationEntry .1.3.6.1.4.1.4491.2.1.30.1.1.2 |
docsRphyRpdDevIdentificationEntryThe conceptual row of docsRphyRpdDevIdentificationTable. DocsRphyRpdDevIdentificationEntry .1.3.6.1.4.1.4491.2.1.30.1.1.2.1 |
docsRphyRpdDevIdVendorNameThis attribute identifies the RPD manufacturer.
The format is vendor proprietary.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.4491.2.1.30.1.1.2.1.1 |
docsRphyRpdDevIdVendorIdThis attribute is the IANA-assigned SMI Network Management
Private Enterprise Code of the vendor, as specified in
RFC 5612.ro Unsigned32 .1.3.6.1.4.1.4491.2.1.30.1.1.2.1.2 |
docsRphyRpdDevIdModelNumThis attribute is the model name and number used by the
vendor to identify the RPD. The format is vendor
proprietary.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.4491.2.1.30.1.1.2.1.3 |
docsRphyRpdDevIdSerialNumThis attribute is the serial number of the RPD.
The format is vendor proprietary.ro SnmpAdminString .1.3.6.1.4.1.4491.2.1.30.1.1.2.1.4 |
docsRphyRpdDevIdDeviceAliasThis attribute reports the device name assigned by the
operator and represents a 'handle' for the RPD.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.4491.2.1.30.1.1.2.1.5 |
docsRphyRpdDevIdDeviceDescrThis attribute is a short text description of the RPD
provided by the RPD manufacturer.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.4491.2.1.30.1.1.2.1.6 |
docsRphyRpdDevIdHwRevThis attribute is the revision number of the hardware
of the RPD. The format is vendor proprietary.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.4491.2.1.30.1.1.2.1.7 |
docsRphyRpdDevIdCurrSwVerThis attribute is the version number of the software
currently running on the RPD. The format is vendor
proprietary.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.4491.2.1.30.1.1.2.1.8 |
docsRphyRpdDevIdBootRomVerThis attribute reports the version number of the boot
ROM currently installed on the RPD. The format is
vendor proprietary.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.4491.2.1.30.1.1.2.1.9 |
docsRphyRpdDevIdUsBurstRcvrVendorIdThis attribute reports the IANA-assigned SMI Network
Management Private Enterprise Code of the RPD's US burst
receiver manufacturer, as specified in RFC 5612.ro Unsigned32 .1.3.6.1.4.1.4491.2.1.30.1.1.2.1.10 |
docsRphyRpdDevIdUsBurstRcvrModelNumThis attribute reports the model number used by the vendor
to identify the RPD's US burst receiver. The format is
vendor proprietary.ro SnmpAdminString .1.3.6.1.4.1.4491.2.1.30.1.1.2.1.11 |
docsRphyRpdDevIdUsBurstRcvrDrivVerThis attribute reports the driver version of the RPD's
US burst receiver. The format is vendor proprietary.ro SnmpAdminString .1.3.6.1.4.1.4491.2.1.30.1.1.2.1.12 |
docsRphyRpdDevIdUsBurstRcvrSerialNumThis attribute reports the serial number of the RPD's
US burst receiver. The format is vendor proprietary.ro SnmpAdminString .1.3.6.1.4.1.4491.2.1.30.1.1.2.1.13 |
docsRphyRpdDevIdRcpProtocolVerThis attribute reports the version of the RCP protocol
supported by the RPD.ro SnmpAdminString .1.3.6.1.4.1.4491.2.1.30.1.1.2.1.14 |
docsRphyRpdDevIdRcpSchemaVerThis attribute reports the version of the RCP schema
supported by the RPD.ro SnmpAdminString .1.3.6.1.4.1.4491.2.1.30.1.1.2.1.15 |
docsRphyRpdDevLocationTableThis table provides location details for the RPD. The
values are populated via a management interface or other
automatic mechanisms (e.g. GPS). SEQUENCE OF DocsRphyRpdDevLocationEntry .1.3.6.1.4.1.4491.2.1.30.1.1.3 |
docsRphyRpdDevLocationEntryThe conceptual row of docsRphyRpdDevLocationTable. DocsRphyRpdDevLocationEntry .1.3.6.1.4.1.4491.2.1.30.1.1.3.1 |
docsRphyRpdDevLocationDescrThis attribute is short text description of where the RPD
has been installed, such as a street address. The format
is specific to the operator.ro SnmpAdminString .1.3.6.1.4.1.4491.2.1.30.1.1.3.1.1 |
docsRphyRpdDevLocationLatitudeThis attribute is the latitudinal coordinate of the RPD
location, expressed as a 6-byte long string as described
in ISO 6709-2008 (6 digit degrees, minutes,
seconds: +/-DDMMSS.S). For example: -750015.1ro SnmpAdminString .1.3.6.1.4.1.4491.2.1.30.1.1.3.1.2 |
docsRphyRpdDevLocationLongitudeThis attribute is the longitudinal coordinate of the RPD
location, expressed as a 7-byte long string as described
in ISO 6709-2008 (7 digits degrees, minutes,
seconds: +/-DDDMMSS.S). For example: -0750015.1ro SnmpAdminString .1.3.6.1.4.1.4491.2.1.30.1.1.3.1.3 |
docsRphyRpdDevCoresConnectedTableThis table provides a list of CCAP-Cores to which the RPD
is authenticated, including the CCAP-Core on which the MIB
is polled. For each CCAP-Core entry, the RPD indicates if
that CCAP-Core is the principal Core. These values are
provided by the CCAP-Core on initialization. SEQUENCE OF DocsRphyRpdDevCoresConnectedEntry .1.3.6.1.4.1.4491.2.1.30.1.1.4 |
docsRphyRpdDevCoresConnectedEntryThe conceptual row of docsRphyRpdDevCoresConnectedTable. DocsRphyRpdDevCoresConnectedEntry .1.3.6.1.4.1.4491.2.1.30.1.1.4.1 |
docsRphyRpdDevCoresConnectedCoreIdThis attribute provides the MAC address of the CCAP-Core
identified in the row entry and acts as a key. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.4491.2.1.30.1.1.4.1.1 |
docsRphyRpdDevCoresConnectedAddressTypeThis attribute specifies the IP address
type for docsRphyRpdDevCoresConnectedAddress.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.4491.2.1.30.1.1.4.1.2 |
docsRphyRpdDevCoresConnectedAddressThis attribute provides the IPv4 or IPv6 address
of the CCAP-Core.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.4491.2.1.30.1.1.4.1.3 |
docsRphyRpdDevCoresConnectedIsPrincipalThis attribute indicates if the CCAP-Core is the
principal core. If true, this attribute indicates
that this CCAP-Core is the principal core.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4491.2.1.30.1.1.4.1.4 |
docsRphyRpdDevCoresConnectedNameThis attribute provides the name of the CCAP-Core
as conveyed to the RPD.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.4491.2.1.30.1.1.4.1.5 |
docsRphyRpdDevCoresConnectedVendorIdThis attribute provides the IANA-assigned SMI Network
Management Private Enterprise Code of the vendor, as
specified in RFC 1700.ro Unsigned32 .1.3.6.1.4.1.4491.2.1.30.1.1.4.1.6 |
docsRphyRpdDevCapabilitiesTableThis table provides information about the principal
capabilities and constraints of the RPD. SEQUENCE OF DocsRphyRpdDevCapabilitiesEntry .1.3.6.1.4.1.4491.2.1.30.1.1.5 |
docsRphyRpdDevCapabilitiesEntryThe conceptual row of docsRphyRpdDevCapabilitiesTable. DocsRphyRpdDevCapabilitiesEntry .1.3.6.1.4.1.4491.2.1.30.1.1.5.1 |
docsRphyRpdDevCapabNumDsPortsThis attribute provides the number of downstream
unidirectional RF ports available on the RPD.ro Unsigned32 .1.3.6.1.4.1.4491.2.1.30.1.1.5.1.1 |
docsRphyRpdDevCapabNumUsPortsThis attribute provides the number of upstream
unidirectional RF ports available on the RPD.ro Unsigned32 .1.3.6.1.4.1.4491.2.1.30.1.1.5.1.2 |
docsRphyRpdDevCapabNumTenGeNsPortsThis attribute provides the number of 10 Gigabit
Ethernet ports supported by the RPD.ro Unsigned32 .1.3.6.1.4.1.4491.2.1.30.1.1.5.1.3 |
docsRphyRpdDevCapabNumOneGeNsPortsThis attribute provides the number 1 Gigabit
Ethernet ports supported by the RPD.ro Unsigned32 .1.3.6.1.4.1.4491.2.1.30.1.1.5.1.4 |
docsRphyRpdDevCapabNumDsScQamChansThis attribute provides the number of downstream
SC-QAM channels supported per downstream RF port.ro Unsigned32 .1.3.6.1.4.1.4491.2.1.30.1.1.5.1.5 |
docsRphyRpdDevCapabNumDsOfdmChansThis attribute provides the number of downstream
DOCSIS 3.1 channels supported per downstream RF port.ro Unsigned32 .1.3.6.1.4.1.4491.2.1.30.1.1.5.1.6 |
docsRphyRpdDevCapabNumUsScQamChansThis attribute provides the number of upstream
SC-QAM channels supported per upstream RF port.ro Unsigned32 .1.3.6.1.4.1.4491.2.1.30.1.1.5.1.7 |
docsRphyRpdDevCapabNumUsOfdmaChansThis attribute provides the number of upstream
DOCSIS 3.1 channels supported per upstream RF port.ro Unsigned32 .1.3.6.1.4.1.4491.2.1.30.1.1.5.1.8 |
docsRphyRpdDevCapabNumDsOob55d1ChansThis attribute provides the number of downstream
SCTE 55-1 channels supported per downstream RF port.ro Unsigned32 .1.3.6.1.4.1.4491.2.1.30.1.1.5.1.9 |
docsRphyRpdDevCapabNumUsOob55d1ChansThis attribute provides the number of upstream
SCTE 55-1 channels supported per upstream RF port.ro Unsigned32 .1.3.6.1.4.1.4491.2.1.30.1.1.5.1.10 |
docsRphyRpdDevCapabNumDsOob55d2ModulesThis attribute provides the number of SCTE 55-2 modules
supported.ro Unsigned32 .1.3.6.1.4.1.4491.2.1.30.1.1.5.1.11 |
docsRphyRpdDevCapabNumUsOob55d2DemodsThis attribute provides the number of upstream demodulators
per SCTE 55-2 modules supported.ro Unsigned32 .1.3.6.1.4.1.4491.2.1.30.1.1.5.1.12 |
docsRphyRpdDevCapabNumNdfChansThis attribute provides the number of narrowband digital
forward channels supported per downstream RF port.ro Unsigned32 .1.3.6.1.4.1.4491.2.1.30.1.1.5.1.13 |
docsRphyRpdDevCapabNumNdrChansThis attribute provides the number of narrowband digital
return channels supported per upstream RF port.ro Unsigned32 .1.3.6.1.4.1.4491.2.1.30.1.1.5.1.14 |
docsRphyRpdDevCapabNumDsPspFlowsPerChanThis attribute provides the number of distinct PSP flows
supported by the RPD on downstream data pseudowires.ro Unsigned32 .1.3.6.1.4.1.4491.2.1.30.1.1.5.1.15 |
docsRphyRpdDevCapabNumUsPspFlowsPerChanThis attribute provides the number of distinct PSP flows
supported by the RPD on upstream data pseudowires.ro Unsigned32 .1.3.6.1.4.1.4491.2.1.30.1.1.5.1.16 |
docsRphyRpdDevCapabNumAsynchVideoChansThis attribute provides the number of asynchronous
MPEG video channels supported per downstream RF port.ro Unsigned32 .1.3.6.1.4.1.4491.2.1.30.1.1.5.1.17 |
docsRphyRpdDevCapabNumCwToneGensThis attribute provides the number of CW tone generators
supported per downstream RF port.ro Unsigned32 .1.3.6.1.4.1.4491.2.1.30.1.1.5.1.18 |
docsRphyRpdDevCapabLowestCwToneFreqThis attribute provides the lowest frequency supported
by the CW tone generators.ro Unsigned32 UNITS "Hz" .1.3.6.1.4.1.4491.2.1.30.1.1.5.1.19 |
docsRphyRpdDevCapabHighestCwToneFreqThis attribute provides the highest frequency supported
by the CW tone generators.ro Unsigned32 UNITS "Hz" .1.3.6.1.4.1.4491.2.1.30.1.1.5.1.20 |
docsRphyRpdDevCapabMaxCwTonePwrThis attribute provides the maximum power level supported
by the dedicated CW tone generators, expressed in
TenthdBmV.ro Unsigned32 .1.3.6.1.4.1.4491.2.1.30.1.1.5.1.21 |
docsRphyRpdDevCapabQamAsPilotThis attribute indicates if a QAM channel can be configured
as a CW tone. A value of true indicates a QAM channel can
be configured as a CW tone. A value of false indicates a
QAM channel cannot be configured as a CW tone.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4491.2.1.30.1.1.5.1.22 |
docsRphyRpdDevCapabSupportsUdpEncapThis attribute reports whether the RPD supports UDP
encapsulation on L2TPv3 pseudowires. A value of true
indicates the RPD supports UDP encapsulation on L2TPv3
pseudowires. A value of false indicates the RPD does not
support UDP encapsulation on L2TPv3 pseudowires.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4491.2.1.30.1.1.5.1.23 |
docsRphyRpdDevCapabSupportsFlowTagsThis attribute indicates Flow Tags support capability. If
the attribute returns a value of true, the RPD supports
Flow Tags on OFDMA channels. A Flow Tag is a 32-bit
identifier of a MAC hardware resource (typically a Service
Flow). The Flow Tag can be assigned to the scheduled SID by
the CCAP Core. The RPD provides Flow Tags in UEPI headers
for OFDMA channels. If the attribute returns a value of
false, the RPD does not support Flow Tags.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4491.2.1.30.1.1.5.1.24 |
docsRphyRpdDevCapabSupportsFreqTiltThis attribute indicates Frequency Tilt support capability.
If the attribute returns a value of true, the RPD supports
Frequency Tilt settings on DS RF Ports. If the attribute
returns a value of false, the RPD does not support
Frequency Tilt settings.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4491.2.1.30.1.1.5.1.25 |
docsRphyRpdDevCapabTiltRangeThis attribute indicates the range of tilt settings that
the RPD supports.ro Unsigned32 .1.3.6.1.4.1.4491.2.1.30.1.1.5.1.26 |
docsRphyRpdDevCapabBufferDepthMonAlertSuppThis attribute indicates buffer depth monitoring alert
supported by the RPD. For each bit set to 1, the RPD
is capable of monitoring buffer depth on the corresponding
types of downstream channels.ro Bits .1.3.6.1.4.1.4491.2.1.30.1.1.5.1.27 |
docsRphyRpdDevCapabBufferDepthCfgSuppThis attribute indicates configuration of the output buffer
depth supported by the RPD. This capability is only
applicable to DOCSIS downstream channels. For each bit set
to 1, the RPD is capable of configuring output buffer depth
of the corresponding types of downstream channels.ro Bits .1.3.6.1.4.1.4491.2.1.30.1.1.5.1.28 |
docsRphyRpdDevCapabRpdUcdProcTimeThis attribute indicates the minimum interval needed by the
RPD to process a UCD message received via GCP. This
interval is equivalent to CM UCD processing time defined in
MULPIv3.1 but its duration can be longer. The maximum value
of the RPD UCD Processing time is 50000 usec. The minimum
value RPD UCD Processing time is equal to CM UCD processing
time (1500 usec for each changed SC-QAM channel or 2000 usec
for each changed upstream OFDMA channel) defined in
MULPIv3.1.ro Unsigned32 .1.3.6.1.4.1.4491.2.1.30.1.1.5.1.29 |
docsRphyRpdDevCapabRpdUcdChgNullGrtTimeThis attribute indicates the minimum Null grant interval
needed by the RPD in the first MAP with incremented UCD
change count. The RPD uses the Null grant in the first map
to programs registers of its burst receiver during this
interval. The maximum value of the RPD UCD Change Null
Grant Time is 4000 usec for each changed channel. The
minimum value of the RPD UCD Change Null Grant Time is
defined in MULPIv3.1.ro Unsigned32 .1.3.6.1.4.1.4491.2.1.30.1.1.5.1.30 |
docsRphyRpdDevCapabMultiSectionTimingMerRepThis attribute indicates whether the RPD supports
Multi-Section Timing and MER reporting as opposed to just
reporting a single average Timing and MER. More detail
is documented in the UEPI Probe Pseudowire format of
R-UEPI.
notSupported: The RPD does not support Multi-Section Timing
and MER Reporting
supportType1: The RPD supports equally spaced
non-overlapping sections
supportType2: The RPD supports fully flexible sections and
spacing of non-overlapping sections.ro Enumeration .1.3.6.1.4.1.4491.2.1.30.1.1.5.1.31 |
docsRphyRpdDevChanReachabilityTableThis table provides RPD channel reachability constraints.
In some RPD implementations, an Ethernet interface might
not have connectivity to all channels on a port of the RPD.
This table is only populated if reachability constraints
exist on the RPD. SEQUENCE OF DocsRphyRpdDevChanReachabilityEntry .1.3.6.1.4.1.4491.2.1.30.1.1.6 |
docsRphyRpdDevChanReachabilityEntryThe conceptual row of docsRphyRpdDevChanReachabilityTable. DocsRphyRpdDevChanReachabilityEntry .1.3.6.1.4.1.4491.2.1.30.1.1.6.1 |
docsRphyRpdDevChanReachabilityEnetPortIndexThis attribute identifies the Ethernet port on the RPD
that has the connectivity constraint. Unsigned32 .1.3.6.1.4.1.4491.2.1.30.1.1.6.1.1 |
docsRphyRpdDevChanReachabilityRfPortIndexThis attribute identifies the RF port with which the
Ethernet port has a connectivity constraint. Unsigned32 .1.3.6.1.4.1.4491.2.1.30.1.1.6.1.2 |
docsRphyRpdDevChanReachabilityChanTypeThis attribute identifies the type of channel that is supported
within the specified channel index range on this RF port from the
specified Ethernet interface. A row entry will be created for each
channel type with a constraint. Absence of a row for a channel type
means there is no constraint for that channel type. RphyChannelType .1.3.6.1.4.1.4491.2.1.30.1.1.6.1.3 |
docsRphyRpdDevChanReachabilityStartChanIndexThis attribute identifies the first channel of the
specified channel type in the range of channels that
does not have connectivity to the specified Ethernet port. Unsigned32 .1.3.6.1.4.1.4491.2.1.30.1.1.6.1.4 |
docsRphyRpdDevChanReachabilityEndChanIndexThis attribute identifies the last channel of the
specified channel type in the range of channels that
does not have connectivity to the specified Ethernet port.ro Unsigned32 .1.3.6.1.4.1.4491.2.1.30.1.1.6.1.5 |
docsRphyRpdDevDsUsRfPortAllocTableThis table provides the allocation status for the
downstream channel resources on the RPD on a per DS RF port
basis as well as for the upstream channel resources on a
per US RF port basis. SEQUENCE OF DocsRphyRpdDevDsUsRfPortAllocEntry .1.3.6.1.4.1.4491.2.1.30.1.1.7 |
docsRphyRpdDevDsUsRfPortAllocEntryThe conceptual row of docsRphyRpdDevDsUsRfPortAllocTable. DocsRphyRpdDevDsUsRfPortAllocEntry .1.3.6.1.4.1.4491.2.1.30.1.1.7.1 |
docsRphyRpdDevDsUsRfPortAllocIndexThis attribute provides the index of the downstream or
upstream RF port for which resource allocation is being
reported. Unsigned32 .1.3.6.1.4.1.4491.2.1.30.1.1.7.1.1 |
docsRphyRpdDevDsUsRfPortAllocDirectionThis attribute indicates whether the allocation
applies to the upstream or downstream RF Port. IfDirection (DOCS-IF3-MIB) .1.3.6.1.4.1.4491.2.1.30.1.1.7.1.2 |
docsRphyRpdDevDsUsRfPortAllocScQamChansThis attribute provides the number of allocated SC-QAM
channels on this RF port.ro Unsigned32 .1.3.6.1.4.1.4491.2.1.30.1.1.7.1.3 |
docsRphyRpdDevDsUsRfPortAllocOfdmChansThis attribute provides the number of allocated DOCSIS 3.1
channels on this RF port.ro Unsigned32 .1.3.6.1.4.1.4491.2.1.30.1.1.7.1.4 |
docsRphyRpdDevDsUsRfPortAllocOob551ChansThis attribute provides the number of allocated SCTE 55-1
channels on this RF port.ro Unsigned32 .1.3.6.1.4.1.4491.2.1.30.1.1.7.1.5 |
docsRphyRpdDevDsUsRfPortAllocNdChansThis attribute provides the number of allocated narrowband
digital forward channels (for DS RF Ports) or narrowband
digital return channels (for US RF Ports) on this RF port.ro Unsigned32 .1.3.6.1.4.1.4491.2.1.30.1.1.7.1.6 |
docsRphyRpdDevL2tpSessionInfoTableThis table provides details about each tunnel
session between the RPD and each CCAP Core with which the
RPD is associated from the RPD's point of view
The attributes in this table are used to create an entry
for each L2TPv3 tunnel (session) terminated at an R-PHY
entity (RPD). SEQUENCE OF DocsRphyRpdDevL2tpSessionInfoEntry .1.3.6.1.4.1.4491.2.1.30.1.1.8 |
docsRphyRpdDevL2tpSessionInfoEntryThe conceptual row of docsRphyRpdDevL2tpSessionInfoTable.
A row entry is created for every session the RPD
terminates and there may be entries for sessions with
different CCAP-Cores if the RPD is connected with one
or more auxiliary cores. DocsRphyRpdDevL2tpSessionInfoEntry .1.3.6.1.4.1.4491.2.1.30.1.1.8.1 |
docsRphyRpdDevL2tpSessionInfoLocalLcceIpAddrTypeThis attribute indicates whether the IP address provide in
docsRphyRpdDevL2tpSessionInfoLocalLcceIpAddr is IPv4 or IPv6. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.4491.2.1.30.1.1.8.1.1 |
docsRphyRpdDevL2tpSessionInfoLocalLcceIpAddrThis attribute provides the local LCCE IP address on the
RPD of the session detailed in the row entry. InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.4491.2.1.30.1.1.8.1.2 |
docsRphyRpdDevL2tpSessionInfoLocalIdThis attribute provides the value of the session ID
assigned to the session by the RPD. Unsigned32 .1.3.6.1.4.1.4491.2.1.30.1.1.8.1.3 |
docsRphyRpdDevL2tpSessionInfoRemoteLcceIpAddrTypeThis attribute indicates whether the IP address provide in
docsRphyRpdDevL2tpSessionInfoRemoteLcceIpAddr is IPv4 or IPv6.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.4491.2.1.30.1.1.8.1.4 |
docsRphyRpdDevL2tpSessionInfoRemoteLcceIpAddrThis attribute provides the remote-side LCCE IP address
of the session detailed in the row entry.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.4491.2.1.30.1.1.8.1.5 |
docsRphyRpdDevL2tpSessionInfoRemoteIdThis attribute provides the value of the session ID
assigned to the session by the remote peer
(RPD).ro Unsigned32 .1.3.6.1.4.1.4491.2.1.30.1.1.8.1.6 |
docsRphyRpdDevL2tpSessionInfoCoreIdThis attribute provides the MAC address of the CCAP Core
with which this session terminates. The CCAP Core sends its
MAC address to the RPD periodically via the DOCSIS SYNC MAC
Message in the Source Address field.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.4491.2.1.30.1.1.8.1.7 |
docsRphyRpdDevL2tpSessionInfoConnCtrlIDThis attribute indicates the control connection
identifier (CCID) for this session.ro Unsigned32 .1.3.6.1.4.1.4491.2.1.30.1.1.8.1.8 |
docsRphyRpdDevL2tpSessionInfoUdpPortThis attribute provides the UDP Port reported by the RPD
when the DEPI session uses L2TPv3 Header Over
UDP. This attribute reports a value of 0 when the session
is running with the L2TPv3 Session IP Header.
This port number is negotiated between the CCAP Core and
the RPD according to the L2TPv3 RFC.ro InetPortNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.4491.2.1.30.1.1.8.1.9 |
docsRphyRpdDevL2tpSessionInfoDescrThis attribute provides an ASCII string constructed with
the form:
RemoteEndId=(pp:mmm:ccc), ...
{ repeated for multiple endpoints }
where
pp is the 0-based port num signaled in the RemoteEndId AVP
mmm is the channel-type enum value from the RemoteEndId AVP
ccc is the channel number from the RemoteEndId AVP.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.4491.2.1.30.1.1.8.1.10 |
docsRphyRpdDevL2tpSessionInfoSessionTypeThis attribute specifies whether the session is an MPT
session or PSP session.ro Enumeration .1.3.6.1.4.1.4491.2.1.30.1.1.8.1.11 |
docsRphyRpdDevL2tpSessionInfoSessionSubTypeThis attribute specifies the type of DEPI MPT or DEPI
PSP session.ro Enumeration .1.3.6.1.4.1.4491.2.1.30.1.1.8.1.12 |
docsRphyRpdDevL2tpSessionInfoMaxPayloadThis attribute indicates the maximum MTU negotiated between
the CCAP Core and the RPD during the session establishment
process. It considers the header subtractions as indicated
in the DEPI specification.ro Unsigned32 .1.3.6.1.4.1.4491.2.1.30.1.1.8.1.13 |
docsRphyRpdDevL2tpSessionInfoPathPayloadThis attribute indicates the maximum MTU traversing the CIN
from CCAP Core to the RPD. This is calculated by the CCAP
Core by procedures such as MTU discovery as described in
the DEPI specification.ro Unsigned32 .1.3.6.1.4.1.4491.2.1.30.1.1.8.1.14 |
docsRphyRpdDevL2tpSessionInfoRpdIfMtuThis attribute provides the RPD's CIN interface MTU and is
read as the value of the following L2TPV3 AVP transmitted
by the RPD during session setup:
DEPI Downstream PW UEPI Upstream PW
DEPI Remote MTU AVP (ICRP) UEPI Remote MTU AVP (ICRP).ro Unsigned32 .1.3.6.1.4.1.4491.2.1.30.1.1.8.1.15 |
docsRphyRpdDevL2tpSessionInfoCoreIfMtuThis attribute provides the CCAP Core's CIN interface MTU
and is read as the value of the following L2TPv3 AVP as
received by the device during session setup:
DEPI Downstream PW UEPI Upstream PW
DEPI Local MTU AVP (ICRQ) UEPI Local MTU AVP (ICRQ).ro Unsigned32 .1.3.6.1.4.1.4491.2.1.30.1.1.8.1.16 |
docsRphyRpdDevL2tpSessionInfoErrorCodeThe error code raised when the session is in an error
state.
'invalidMACInterfaceValue'
Indicates wrong assignment of the CCAP Core MAC interface
ifIndex.
'invalidInterfaceValue'
Indicates wrong assignment of the CCAP Core Downstream
interface ifIndex
'noResourcesForInterfaceIfIndex'
Indicates the CCAP Core has no more resources to
assign a session to this entry.
'l2tpv3Error'
An L2TPv3 StopCCN or CDN message was issued
'ifAdminStatusSetToDown'
Indicates the ifAdminStatus was set to down and the
session was torn down.ro Enumeration .1.3.6.1.4.1.4491.2.1.30.1.1.8.1.17 |
docsRphyRpdDevL2tpSessionInfoCreationTimeThe attribute contains the sysUptime when the entry was
turned active.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.4491.2.1.30.1.1.8.1.18 |
docsRphyRpdDevL2tpSessionInfoOperStatusThis attribute provides the current status of the
pseudowire from the point of view of the specific
reporting entity (RPD).
Values are as follows:
'other'
indicates a vendor-specific operational status.
'up'
indicates that the pseudowire is ready to pass packets.
'down'
indicates that pseudowire signaling is not yet finished,
or indications available at the service level indicate
that the pseudowire is not passing packets.
'testing'
indicates that AdminStatus at the pseudowire level is
set to test.
'dormant'
indicates that the pseudowire is not in a condition to
pass packets but is in a 'pending' state, waiting for
some external event.
'notPresent'
indicates that some component is missing to accomplish
the setup of the pseudowire. It can be a configuration
error, incomplete configuration, or a missing H/W
component.
'lowerLayerDown'
indicates one or more of the lower-layer
interfaces responsible for running the underlying PSN
is not in OperStatus 'up' state.ro Enumeration .1.3.6.1.4.1.4491.2.1.30.1.1.8.1.19 |
docsRphyRpdDevL2tpSessionInfoLocalStatusThe attribute provides the status of the pseudowire
in the local node. If the 'other' bit is set, it indicates
that an additional vendor-specific status is reported.
If none of the bits are set, it indicates no faults are
reported.ro Bits .1.3.6.1.4.1.4491.2.1.30.1.1.8.1.20 |
docsRphyRpdDevL2tpSessionInfoLastChangeThe attribute provides the value of sysUpTime
when the session entered its current OperStatus
state from the point of view of the specific
reporting entity (RPD).ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.4491.2.1.30.1.1.8.1.21 |
docsRphyRpdDevL2tpSessionStatsTableThis table provides statistics about each tunnel
session between the RPD and each CCAP Core with which the
RPD is associated from the RPD's point of view. SEQUENCE OF DocsRphyRpdDevL2tpSessionStatsEntry .1.3.6.1.4.1.4491.2.1.30.1.1.9 |
docsRphyRpdDevL2tpSessionStatsEntryThe conceptual row of docsRphyRpdDevL2tpSessionStatsTable.
This table is an augmentation of
docsRphyL2tpSessionInfoTable. DocsRphyRpdDevL2tpSessionStatsEntry .1.3.6.1.4.1.4491.2.1.30.1.1.9.1 |
docsRphyRpdDevL2tpSessionStatsOutOfSeqPktsThis attribute indicates the count of session packets that
were received out of sequence from the point of view of the
reporting entity. It is vendor dependent the re-sequence of
packets. Implementations that do not re-sequence packets
also increase the value of ifInDiscards for the respective
entry.ro Counter32 .1.3.6.1.4.1.4491.2.1.30.1.1.9.1.1 |
docsRphyRpdDevDiagStatusTableThis table reports information about an RPD's diagnostic
self test results. SEQUENCE OF DocsRphyRpdDevDiagStatusEntry .1.3.6.1.4.1.4491.2.1.30.1.1.10 |
docsRphyRpdDevDiagStatusEntryThe conceptual row of docsRphyRpdDevDiagStatusTable.
This table returns at least one row indicating pass or
failure for the diagnostic self test. DocsRphyRpdDevDiagStatusEntry .1.3.6.1.4.1.4491.2.1.30.1.1.10.1 |
docsRphyRpdDevDiagStatusProbableCauseThis attribute reports the probable cause of the
diagnostic test error condition. Probable causes
may be related to:
- Communications error
- Quality of Service error
- Processing error
- Equipment error
- Environmental error
The format for values returned are vendor-specific.
When the self test result is a pass, this attribute
returns 'Self Test Passed'.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.4491.2.1.30.1.1.10.1.1 |
docsRphyRpdDevDiagStatusAdditionalTextThis attribute reports a free form text description of the
diagnostic test error condition. This provides
supplemental information for the ProbableCause.
When the self test result is a pass, this attribute returns
'No errors found'.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.4491.2.1.30.1.1.10.1.2 |
docsRphyRpdDevDiagStatusSeverityLevelThis attribute reports the severity level for the
diagnostic test error condition. Severity levels are based
on the DOCSIS event priority levels.
When the self test result is a pass, this attribute returns
'information'.ro RphyEventSeverityType .1.3.6.1.4.1.4491.2.1.30.1.1.10.1.3 |
docsRphyRpdDevDepiMcastSessionTableThis table reports the DEPI IP multicast sessions
currently joined by an RPD. SEQUENCE OF DocsRphyRpdDevDepiMcastSessionEntry .1.3.6.1.4.1.4491.2.1.30.1.1.11 |
docsRphyRpdDevDepiMcastSessionEntryThe conceptual row of docsRphyRpdDevDepiMcastSessionTable.
A row entry of this table represents one DEPI IP Multicast
session replicated to one RPD. The indexing provides the
RPD unique identifier and the (S,G) IP address pair that
uniquely identifies an IP multicast session. The CCAP Core
creates a row entry when it confirms an RPD has joined a
DEPI IP multicast session. The CCAP Core deletes the row
entry when it confirms an RPD has left the DEPI IP
multicast session or disconnects its GCP session with
the CCAP Core. DocsRphyRpdDevDepiMcastSessionEntry .1.3.6.1.4.1.4491.2.1.30.1.1.11.1 |
docsRphyRpdDevDepiMcastSessionIpAddrTypeThis key attribute reports whether the IP addresses
provided in GroupIpAddr, SourceIpAddr, LocalLcceIpAddr
and RemoteLcceIpAddr are IPv4 or IPv6. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.4491.2.1.30.1.1.11.1.1 |
docsRphyRpdDevDepiMcastSessionGrpIpAddrThis key attribute reports the group (destination) address
of an IP multicast session transmitted via DEPI
multicast. InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.4491.2.1.30.1.1.11.1.2 |
docsRphyRpdDevDepiMcastSessionSrcIpAddrFor Source Specific Multicast (SSM), this key attribute
reports the source IP address of an IP multicast session
transmitted via DEPI multicast. For Any-Source Multicast
(ASM) sessions, this attribute reports the all-0s IP
address. InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.4491.2.1.30.1.1.11.1.3 |
docsRphyRpdDevDepiMcastSessionLocalLcceIpAddrThis attribute reports the RPD local LCCE IP address of
the L2TPv3 DEPI control session that instructed the RPD
to join the IP multicast session.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.4491.2.1.30.1.1.11.1.4 |
docsRphyRpdDevDepiMcastSessionRemoteLcceIpAddrThis attribute reports the RPD remote LCCE IP address
(i.e. on the CCAP Core) of the L2TPv3 control session
that instructed the RPD to join the IP multicast session.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.4491.2.1.30.1.1.11.1.5 |
docsRphyRpdDevDepiMcastSessionIdThis attribute reports the L2TPv3 Session ID assigned by
the CCAP Core to the DEPI IP multicast session. The value
is assigned according to the referenced specification in
the range 0x80000001 through 0x8000FFFF.ro Unsigned32 .1.3.6.1.4.1.4491.2.1.30.1.1.11.1.6 |
docsRphyRpdDevDepiMcastSessionJoinTimeThis attribute reports the last time the RPD has joined this session.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.4491.2.1.30.1.1.11.1.7 |
docsRphyRpdDevEventLogTableThis table reports event log information for an RPD. SEQUENCE OF DocsRphyRpdDevEventLogEntry .1.3.6.1.4.1.4491.2.1.30.1.1.12 |
docsRphyRpdDevEventLogEntryThe conceptual row of docsRphyRpdDevEventLogTable. DocsRphyRpdDevEventLogEntry .1.3.6.1.4.1.4491.2.1.30.1.1.12.1 |
docsRphyRpdDevEventLogIndexThis key attribute provides relative ordering of the events
in the event log. This attribute will always increase
except when
(a) the log is reset
(b) the device reboots and does not implement non-volatile
storage for this log, or
(c) it reaches the value 2^31. The next entry for all the
above cases is 1. Unsigned32 .1.3.6.1.4.1.4491.2.1.30.1.1.12.1.1 |
docsRphyRpdDevEventLogFirstTimeThis attribute provides the local RPD time
when this event was created.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.4491.2.1.30.1.1.12.1.2 |
docsRphyRpdDevEventLogLastTimeWhen an event reports only one event occurrence, this
attribute will have the same value as the corresponding
instance of FirstTime. When an event reports multiple
event occurrences, this attribute will record the local
RPD time when the most recent occurrence for this event
occurred.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.4491.2.1.30.1.1.12.1.3 |
docsRphyRpdDevEventLogCountsThis attribute provides the number of consecutive event
occurrences reported by this event. This starts at 1 with
the creation of this event occurrence and increments by 1
for each subsequent duplicate event occurrence.ro Counter32 .1.3.6.1.4.1.4491.2.1.30.1.1.12.1.4 |
docsRphyRpdDevEventLogLevelThis attribute provides the priority level of this event,
as defined by Annex B. These are ordered from most serious
(emergency) to least serious (debug).ro RphyEventSeverityType .1.3.6.1.4.1.4491.2.1.30.1.1.12.1.5 |
docsRphyRpdDevEventLogIdThis attribute provides the identifier of this event,
as defined by Annex B.ro Unsigned32 .1.3.6.1.4.1.4491.2.1.30.1.1.12.1.6 |
docsRphyRpdDevEventLogTextThis attribute provides the message text of this event,
as defined by Annex B.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.4491.2.1.30.1.1.12.1.7 |
docsRphyRpdDevOob551UsChanStatusTableThis table provides per-RPD counts of upstream SCTE 55-1 cells sent
to a Network Controller. SEQUENCE OF DocsRphyRpdDevOob551UsChanStatusEntry .1.3.6.1.4.1.4491.2.1.30.1.1.13 |
docsRphyRpdDevOob551UsChanStatusEntryThe conceptual row of docsRphyRpdDevOob551UsChanStatusTable.
A row entry of this table represents counts that are updated
by the CCAP Core, which parses each upstream SCTE 55-1 packet
and uses the power level and packet status
(which are really cell status) bits in those packets to determine
how to update the counters. DocsRphyRpdDevOob551UsChanStatusEntry .1.3.6.1.4.1.4491.2.1.30.1.1.13.1 |
docsRphyRpdDevOob551UsChanStatusRfPortThis key attribute reports the RPD RF port number carrying
this SCTE 55-1 US channel. Unsigned32 .1.3.6.1.4.1.4491.2.1.30.1.1.13.1.1 |
docsRphyRpdDevOob551UsChanStatusChannelIdThis key attribute reports the demodulator ID (channel number)
for this SCTE 55-1 US channel. Unsigned32 .1.3.6.1.4.1.4491.2.1.30.1.1.13.1.2 |
docsRphyRpdDevOob551UsChanStatusNcIpAddrTypeThis attribute indicates whether the IP address provide in
docsRphyRpdDevOob551UsChanStatusNcIpAddr is IPv4 or IPv6.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.4491.2.1.30.1.1.13.1.3 |
docsRphyRpdDevOob551UsChanStatusNcIpAddrThis attribute reports the IP host address of the
Network Controller receiving the cells on this
SCTE 55-1 US channel.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.4491.2.1.30.1.1.13.1.4 |
docsRphyRpdDevOob551UsChanStatusArpdSrcIpAddrTypeThis attribute indicates whether the IP address provide in
docsRphyRpdDevOob551UsChanStatusArpdSrcIpAddr is IPv4 or IPv6.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.4491.2.1.30.1.1.13.1.5 |
docsRphyRpdDevOob551UsChanStatusArpdSrcIpAddrThis attribute reports the virtual ARPD source
IP host address used when sending cells to the
Network Controller.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.4491.2.1.30.1.1.13.1.6 |
docsRphyRpdDevOob551UsChanStatusPerfectCellsRcvdThis attribute reports the number of perfect cells
received by the demodulator for this SCTE 55-1 US channel.
Perfect cells have status 0 in the US SCTE 55-1 OOB packet.ro Counter64 .1.3.6.1.4.1.4491.2.1.30.1.1.13.1.7 |
docsRphyRpdDevOob551UsChanStatusCorrectedCellsRcvdThis attribute reports the number of errored cells
received by the demodulator for this SCTE 55-1 US channel
that were successfully corrected. Corrected cells have
status 1 in the US SCTE 55-1 OOB packet.ro Counter64 .1.3.6.1.4.1.4491.2.1.30.1.1.13.1.8 |
docsRphyRpdDevOob551UsChanStatusUncorrectableCellsRcvdThis attribute reports the number of errored cells received
by the demodulator for this SCTE 55-1 US channel that could
not be corrected. Uncorrectable cells have status 3 in the
US SCTE 55-1 OOB packet.ro Counter64 .1.3.6.1.4.1.4491.2.1.30.1.1.13.1.9 |
docsRphyRpdDevOob551UsChanStatusTotalCellsRcvdThis attribute reports the total of all cells received for
this SCTE 55-1 US channel.ro Counter64 .1.3.6.1.4.1.4491.2.1.30.1.1.13.1.10 |
docsRphyRpdDevOob551UsChanStatusPwrLevelThis attribute reports the average power level from nominal
of all received MAC Cells by the demodulator for this upstream
SCTE 55-1 channel in tenths of a dB. The six power level bits 1
in the US SCTE 55-1 OOB packet report the nominal power per cell
in units of 0.5 dB.ro Integer32 .1.3.6.1.4.1.4491.2.1.30.1.1.13.1.11 |
docsRphyRpdDevOob551UsChanStatusMaxPwrLevelThis attribute reports the maximum power level from nominal
of all received MAC Cells by the demodulator for this upstream
SCTE 55-1 channel in tenths of a dB.ro Integer32 .1.3.6.1.4.1.4491.2.1.30.1.1.13.1.12 |
docsRphyRpdDevOob551UsChanStatusMinPwrLevelThis attribute reports the minimum power level from nominal of
all received MAC Cells by the demodulator for this upstream SCTE 55-1
channel in tenths of a dB.ro Integer32 .1.3.6.1.4.1.4491.2.1.30.1.1.13.1.13 |
docsRphyRpdDevOob551UsChanStatusCounterDiscontinuityTimeTThis attribute reports the value of sysUpTime on the most recent
occasion at which any one or more of this interface's counters suffered
a discontinuity. If no such discontinuities have occurred since the last
re-initialization of the local management subsystem, then this attribute
reports a zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.4491.2.1.30.1.1.13.1.14 |
docsRphyRpdDevCrashDataFileStatusTableThis table provides status information for the
crash analysis data files. SEQUENCE OF DocsRphyRpdDevCrashDataFileStatusEntry .1.3.6.1.4.1.4491.2.1.30.1.1.14 |
docsRphyRpdDevCrashDataFileStatusEntryThe conceptual row of docsRphyRpdDevCrashDataFileStatusTable.
A row entry of this table represents a file
that is available in the device for upload or
for which an upload is in progress. DocsRphyRpdDevCrashDataFileStatusEntry .1.3.6.1.4.1.4491.2.1.30.1.1.14.1 |
docsRphyRpdDevCrashDataFileStatusIndexThis key attribute uniquely identifies a crash analysis file. Unsigned32 .1.3.6.1.4.1.4491.2.1.30.1.1.14.1.1 |
docsRphyRpdDevCrashDataFileStatusFilenameThis attribute contains the name of the crash analysis file,
stored in the device that is available to be uploaded to the
server. Filenames are defined by the application that creates
them. The RPD SHOULD generate crash analysis files with names
which include RPD's unique id and a timestamp. The timestamp
indicates the time when the crash has occurred with granularity
of one second. The RPD SHOULD format the timestamp in the form
'Unix time', which is defined as the number of seconds that have
elapsed since midnight Coordinated Universal Time (UTC),
Thursday, 1 January 1970. For example, a crash file name
'RPD_crash_dump_id_00000187ADF_time_1403405123' indicates that
the file was generated by RPD with Unique ID of 00.00.00.18.7A.DF
on Sunday 22nd June 2014 02:45:23 AM.ro SnmpAdminString .1.3.6.1.4.1.4491.2.1.30.1.1.14.1.2 |
docsRphyRpdDevCrashDataFileStatusFileStatusThis attribute reflects the status of the crash data file.
The possible values are listed below.
other(1) - Any condition not covered by the other defined values.
availableForUpload(2) - The file is available to be uploaded.
uploadInProgress(3) - The file is currently being uploaded.
The file is not available for another upload in this state.
uploadCompleted(4) - The file was successfully uploaded.
The file is available for another upload.
uploadPending(5) - The file has been selected for upload but a
condition does not allow the upload to take place. The upload
will start when the condition blocking uploads has been removed.
For example, another upload that is currently in progress could
cause this value to be returned. uploadPending status can also
indicate a situation where the RPD is waiting to retry the upload
after the initial attempt(s) has failed. The file is not available
for another upload in this state.
uploadCancelled(6) - An upload was cancelled before it completed.
The file is available for another upload.
error(7) - An error occurred and the file was not successfully uploaded.
The file is available for another upload.ro Enumeration .1.3.6.1.4.1.4491.2.1.30.1.1.14.1.3 |
docsRphyRpdDevUsSignalQualityTableThis table provide individual upstream signal quality
values for RPDs. SEQUENCE OF DocsRphyRpdDevUsSignalQualityEntry .1.3.6.1.4.1.4491.2.1.30.1.1.15 |
docsRphyRpdDevUsSignalQualityEntryThe conceptual row of docsRphyRpdDevUsSignalQualityTable.
A row entry of this table represents the upstream signal quality
values of a single RPD DocsRphyRpdDevUsSignalQualityEntry .1.3.6.1.4.1.4491.2.1.30.1.1.15.1 |
docsRphyRpdDevUsSignalQualityRfPortThis key attribute reports the RPD RF port number carrying
this US channel. This corresponds to the attribute RpdUsRfPortNum
of the RpdUsRfPortRef object in the configuration Information Model. Unsigned32 .1.3.6.1.4.1.4491.2.1.30.1.1.15.1.1 |
docsRphyRpdDevUsSignalQualityChannelIfIndexThis attribute corresponds to the ifIndex of the Upstream
Physical Channel of the CCAP Core for this US channel. Note
that with upstream virtual combining, this attribute corresponds
to the same CCAP Core ifIndex for different RPD unique Ids. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4491.2.1.30.1.1.15.1.2 |
docsRphyRpdDevUsSignalQualityRxMerThis attribute reports an in-channel received average
Modulation Error Ratio (MER). An RxMER sample is defined
as an estimate, provided by the demodulator, of the ratio:
(average constellation energy with equally likely symbols) /
(average squared magnitude of error vector)
RxMER is measured just prior to FEC (trellis/Reed-Solomon)
decoding. RxMER includes the effects of the HFC channel as
well as implementation effects of the modulator and demodulator.
Error vector estimation may vary among demodulator implementations.
The CCAP Core RxMER is averaged over a given number of bursts at
the burst receiver, which may correspond to transmissions from
multiple users. In the case of S-CDMA mode, RxMER is measured on
the de-spread signal.
For OFDMA channels, this attribute always reports 0.ro Integer32 (-2147483648..2147483647) UNITS "TenthdB" .1.3.6.1.4.1.4491.2.1.30.1.1.15.1.3 |
docsRphyRpdDevUsSignalQualityRxMerSamplesThis attribute reports RxMerSamples which is a statistically
significant number of bursts for the CCAP Core, processed to
arrive at the RxMER value. For the CCAP Core, the MER measurement
includes only valid bursts that are not in contention regions.
For OFDMA channels, this attribute always reports 0.ro Unsigned32 .1.3.6.1.4.1.4491.2.1.30.1.1.15.1.4 |
docsRphyRpdDevUsSignalQualityUnerroredsThis attribute reports the count of codewords received on
this channel without error. This includes all codewords,
whether or not they were part of frames destined for this device.
Reference: OFDMA FEC Error Reporting section of this specification.ro Counter64 .1.3.6.1.4.1.4491.2.1.30.1.1.15.1.5 |
docsRphyRpdDevUsSignalQualityCorrectedsThis attribute reports the count of codewords received on
this channel with correctable errors. This includes all
codewords, whether or not they were part of frames destined
for this device.
Reference: OFDMA FEC Error Reporting section of this specification.ro Counter64 .1.3.6.1.4.1.4491.2.1.30.1.1.15.1.6 |
docsRphyRpdDevUsSignalQualityUncorrectablesThis attribute reports the count of codewords received on
this channel with uncorrectable errors. This includes all
codewords, whether or not they were part of frames destined
for this device.
Reference: OFDMA FEC Error Reporting section of this specification.ro Counter64 .1.3.6.1.4.1.4491.2.1.30.1.1.15.1.7 |
docsRphyRpdIfMibObjects OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.1.30.1.2 |
docsRphyRpdIfPhysEntityTableThis table reports entities that exist within each Remote
PHY Node that is communicating with the CCAP Core. Because
the entities exist within the Remote PHY Nodes and not the
CCAP Core, the RPDs communicate this information to the
CCAP core via GCP. This object is based on the
entPhysicalTable object specified in the ENTITY-MIB from
RFC 4133.
See the reference for additional requirements. SEQUENCE OF DocsRphyRpdIfPhysEntityEntry .1.3.6.1.4.1.4491.2.1.30.1.2.1 |
docsRphyRpdIfPhysEntityEntryInformation about a particular physical entity.
Each entry provides objects (docsRphyRpdIfPhysEntityDescr,
docsRphyRpdIfPhysEntityVendorType, and docsRphyRpdIfPhysEntityClass) to help an NMS
identify and characterize the entry and objects
(docsRphyRpdIfPhysEntityContainedIn and docsRphyRpdIfPhysEntityParentRelPos) to help
an NMS relate the particular entry to other entries in this
table. DocsRphyRpdIfPhysEntityEntry .1.3.6.1.4.1.4491.2.1.30.1.2.1.1 |
docsRphyRpdIfPhysEntityIndexThis key attribute reports an arbitrary value that uniquely
identifies the physical entity. Index values for different
physical entities are not necessarily contiguous. PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.4491.2.1.30.1.2.1.1.1 |
docsRphyRpdIfPhysEntityDescrA textual description of physical entity. This object
should contain a string that identifies the manufacturer's
name for the physical entity and should be set to a
distinct value for each version or model of the physical
entity.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.4491.2.1.30.1.2.1.1.2 |
docsRphyRpdIfPhysEntityVendorTypeAn indication of the vendor-specific hardware type of the
physical entity. Note that this is different from the
definition of MIB-II's sysObjectID.
An agent should set this object to an enterprise-specific
registration identifier value indicating the specific
equipment type in detail. The associated instance of
docsRphyRpdIfPhysEntityClass is used to indicate the general type of
hardware device.
If no vendor-specific registration identifier exists for
this physical entity, or the value is unknown by this agent,
then the value { 0 0 } is returned.ro AutonomousType (SNMPv2-TC) .1.3.6.1.4.1.4491.2.1.30.1.2.1.1.3 |
docsRphyRpdIfPhysEntityContainedInThe value of docsRphyRpdIfPhysEntityIndex for the physical entity that
'contains' this physical entity. A value of zero indicates
this physical entity is not contained in any other physical
entity. Note that the set of 'containment' relationships
define a strict hierarchy; that is, recursion is not
allowed.
In the event that a physical entity is contained by more
than one physical entity (e.g., double-wide modules), this
object should identify the containing entity with the lowest
value of docsRphyRpdIfPhysEntityIndex.ro PhysicalIndexOrZero .1.3.6.1.4.1.4491.2.1.30.1.2.1.1.4 |
docsRphyRpdIfPhysEntityClassAn indication of the general hardware type of the physical
entity.
An agent should set this object to the standard enumeration
value that most accurately indicates the general class of
the physical entity, or the primary class if there is more
than one entity.
If no appropriate standard registration identifier exists
for this physical entity, then the value 'other(1)' is
returned. If the value is unknown by this agent, then the
value 'unknown(2)' is returned.ro IANAPhysicalClass (IANA-ENTITY-MIB) .1.3.6.1.4.1.4491.2.1.30.1.2.1.1.5 |
docsRphyRpdIfPhysEntityParentRelPosAn indication of the relative position of this 'child'
component among all its 'sibling' components. Sibling
components are defined as docsRphyRpdIfPhysEntityEntries that share the
same instance values of each of the docsRphyRpdIfPhysEntityContainedIn
and docsRphyRpdIfPhysEntityClass objects.
An NMS can use this object to identify the relative ordering
for all sibling components of a particular parent
(identified by the docsRphyRpdIfPhysEntityContainedIn instance in each
sibling entry).
If possible, this value should match any external labeling
of the physical component. For example, for a container
(e.g., card slot) labeled as 'slot #3',
docsRphyRpdIfPhysEntityParentRelPos should have the value '3'. Note
that the docsRphyRpdIfPhysEntityEntry for the module plugged in slot 3
should have an docsRphyRpdIfPhysEntityParentRelPos value of '1'.
If the physical position of this component does not match
any external numbering or clearly visible ordering, then
user documentation or other external reference material
should be used to determine the parent-relative position.
If this is not possible, then the agent should assign a
consistent (but possibly arbitrary) ordering to a given set
of 'sibling' components, perhaps based on internal
representation of the components.
If the agent cannot determine the parent-relative position
for some reason, or if the associated value of
docsRphyRpdIfPhysEntityContainedIn is '0', then the value '-1' is
returned. Otherwise, a non-negative integer is returned,
indicating the parent-relative position of this physical
entity.
Parent-relative ordering normally starts from '1' and
continues to 'N', where 'N' represents the highest
positioned child entity. However, if the physical entities
(e.g., slots) are labeled from a starting position of zero,
then the first sibling should be associated with an
docsRphyRpdIfPhysEntityParentRelPos value of '0'. Note that this
ordering may be sparse or dense, depending on agent
implementation.
The actual values returned are not globally meaningful, as
each 'parent' component may use different numbering
algorithms. The ordering is only meaningful among siblings
of the same parent component.
The agent should retain parent-relative position values
across reboots, either through algorithmic assignment or use
of non-volatile storage.ro Integer32 (-1..2147483647) .1.3.6.1.4.1.4491.2.1.30.1.2.1.1.6 |
docsRphyRpdIfPhysEntityNameThe textual name of the physical entity. The value of this
object should be the name of the component as assigned by
the local device and should be suitable for use in commands
entered at the device's 'console'. This might be a text
name (e.g., 'console') or a simple component number (e.g.,
port or module number, such as '1'), depending on the
physical component naming syntax of the device.
If there is no local name, or if this object is otherwise
not applicable, then this object contains a zero-length
string.
Note that the value of docsRphyRpdIfPhysEntityName for two physical
entities will be the same in the event that the console
interface does not distinguish between them, e.g., slot-1
and the card in slot-1.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.4491.2.1.30.1.2.1.1.7 |
docsRphyRpdIfPhysEntityHardwareRevThe vendor-specific hardware revision string for the
physical entity. The preferred value is the hardware
revision identifier actually printed on the component itself
(if present).
Note that if revision information is stored internally in a
non-printable (e.g., binary) format, then the agent must
convert such information to a printable format in an
implementation-specific manner.
If no specific hardware revision string is associated with
the physical component, or if this information is unknown to
the agent, then this object will contain a zero-length
string.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.4491.2.1.30.1.2.1.1.8 |
docsRphyRpdIfPhysEntityFirmwareRevThe vendor-specific firmware revision string for the
physical entity.
Note that if revision information is stored internally in a
non-printable (e.g., binary) format, then the agent must
convert such information to a printable format in an
implementation-specific manner.
If no specific firmware programs are associated with the
physical component, or if this information is unknown to the
agent, then this object will contain a zero-length string.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.4491.2.1.30.1.2.1.1.9 |
docsRphyRpdIfPhysEntitySoftwareRevThe vendor-specific software revision string for the
physical entity.
Note that if revision information is stored internally in a
non-printable (e.g., binary) format, then the agent must
convert such information to a printable format in an
implementation-specific manner.
If no specific software programs are associated with the
physical component, or if this information is unknown to the
agent, then this object will contain a zero-length string.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.4491.2.1.30.1.2.1.1.10 |
docsRphyRpdIfPhysEntitySerialNumThe vendor-specific serial number string for the physical
entity. The preferred value is the serial number string
actually printed on the component itself (if present).
On the first instantiation of a physical entity, the value
of docsRphyRpdIfPhysEntitySerialNum associated with that entity is set
to the correct vendor-assigned serial number, if this
information is available to the agent. If a serial number
is unknown or non-existent, the docsRphyRpdIfPhysEntitySerialNum will be
set to a zero-length string instead.
Note that implementations that can correctly identify the
serial numbers of all installed physical entities do not
need to provide write access to the docsRphyRpdIfPhysEntitySerialNum
object. Agents that cannot provide non-volatile storage
for the docsRphyRpdIfPhysEntitySerialNum strings are not required to
implement write access for this object.
Not every physical component will have a serial number, or
even need one. Physical entities for which the associated
value of the docsRphyRpdIfPhysEntityIsFRU object is equal to 'false(2)'
(e.g., the repeater ports within a repeater module) do not
need their own unique serial numbers. An agent does not
have to provide write access for such entities and may
return a zero-length string.ro SnmpAdminString .1.3.6.1.4.1.4491.2.1.30.1.2.1.1.11 |
docsRphyRpdIfPhysEntityMfgNameThe name of the manufacturer of this physical component.
The preferred value is the manufacturer name string actually
printed on the component itself (if present).
Note that comparisons between instances of the
docsRphyRpdIfPhysEntityModelName, docsRphyRpdIfPhysEntityFirmwareRev,
docsRphyRpdIfPhysEntitySoftwareRev, and the docsRphyRpdIfPhysEntitySerialNum
objects are only meaningful amongst docsRphyRpdIfPhysEntityEntries with
the same value of docsRphyRpdIfPhysEntityMfgName.
If the manufacturer name string associated with the physical
component is unknown to the agent, then this object will
contain a zero-length string.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.4491.2.1.30.1.2.1.1.12 |
docsRphyRpdIfPhysEntityModelNameThe vendor-specific model name identifier string associated
with this physical component. The preferred value is the
customer-visible part number, which may be printed on the
component itself.
If the model name string associated with the physical
component is unknown to the agent, then this object will
contain a zero-length string.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.4491.2.1.30.1.2.1.1.13 |
docsRphyRpdIfPhysEntityAliasThis object is an 'alias' name for the physical entity, as
specified by a network manager, and provides a non-volatile
'handle' for the physical entity.
On the first instantiation of a physical entity, the value
of docsRphyRpdIfPhysEntityAlias associated with that entity is set to
the zero-length string. However, the agent may set the
value to a locally unique default value, instead of a
zero-length string.ro SnmpAdminString .1.3.6.1.4.1.4491.2.1.30.1.2.1.1.14 |
docsRphyRpdIfPhysEntityAssetIDThis object is a user-assigned asset tracking identifier
(as specified by a network manager) for the physical entity
and provides non-volatile storage of this information.
On the first instantiation of a physical entity, the value
of docsRphyRpdIfPhysEntityAssetID associated with that entity is set to
the zero-length string.
Not every physical component will have an asset tracking
identifier or even need one. Physical entities for which
the associated value of the docsRphyRpdIfPhysEntityIsFRU object is equal
to 'false(2)' (e.g., the repeater ports within a repeater
module) do not need their own unique asset tracking
identifier. An agent does not have to provide write access
for such entities and may instead return a zero-length
string.
If no asset tracking information is associated with the
physical component, then this object will contain a
zero-length string.ro SnmpAdminString .1.3.6.1.4.1.4491.2.1.30.1.2.1.1.15 |
docsRphyRpdIfPhysEntityIsFRUThis object indicates whether or not this physical entity
is considered a 'field replaceable unit' by the vendor.
If this object contains the value 'true(1)', then this
docsRphyRpdIfPhysEntityEntry identifies a field replaceable unit. For
all docsRphyRpdIfPhysEntityEntries that represent components
permanently contained within a field replaceable unit, the
value 'false(2)' should be returned for this object.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4491.2.1.30.1.2.1.1.16 |
docsRphyRpdIfPhysEntityMfgDateThis object contains the date of manufacturing of the
managed entity. If the manufacturing date is unknown or
not supported, the object is not instantiated. The special
value '0000000000000000'H may also be returned in this
case.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.4491.2.1.30.1.2.1.1.17 |
docsRphyRpdIfPhysEntityUrisThis object contains identification
information about the physical entity. The object
contains URIs; therefore, the syntax of this object
must conform to RFC 3986, Section 3.
Multiple URIs may be present and are separated by white
space characters. Leading and trailing white space
characters are ignored.
If no URI identification information is known
about the physical entity, the object is not
instantiated. A zero-length octet string may also be
returned in this case.ro OCTET STRING .1.3.6.1.4.1.4491.2.1.30.1.2.1.1.18 |
docsRphyRpdIfPhysEntityUUIDThis object contains identification information
about the physical entity. The object contains a
Universally Unique Identifier, the syntax of this object
must conform to RFC 4122, Section 4.1.
A zero-length octet string is returned if no UUID
information is known.ro UUIDorZero (UUID-TC-MIB) .1.3.6.1.4.1.4491.2.1.30.1.2.1.1.19 |
docsRphyRpdIfPhysEntityCoreIfIndexIf the entity represents an ifTable interface on the CCAP
Core, this attribute provides the ifIndex assigned by the
CCAP Core to that entity. Otherwise, this attribute returns
a value of zero.ro InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.4491.2.1.30.1.2.1.1.20 |
docsRphyRpdIfPhysEntSensorTableThis table contains one row per physical sensor represented
by an associated row in the docsRphyRpdIfPhysEntityTable.
See the reference for additional requirements. SEQUENCE OF DocsRphyRpdIfPhysEntSensorEntry .1.3.6.1.4.1.4491.2.1.30.1.2.2 |
docsRphyRpdIfPhysEntSensorEntryInformation about a particular physical sensor.
An entry in this table describes the present reading of a
sensor, the measurement units and scale, and sensor
operational status.
Entries are created in this table by the agent. The CCAP
Core SHOULD create an entry for each physical sensor at
the same time as the associated Entity table instance.
The CCAP Core SHOULD delete an entry if the associated
Entity table entry is deleted. DocsRphyRpdIfPhysEntSensorEntry .1.3.6.1.4.1.4491.2.1.30.1.2.2.1 |
docsRphyRpdIfPhysEntSensorTypeThis attribute reports the type of data returned by the
associated Value attribute.
The CCAP Core SHOULD set the value during instance creation.
The CCAP Core SHOULD NOT change the value during operation.ro EntitySensorDataType (ENTITY-SENSOR-MIB) .1.3.6.1.4.1.4491.2.1.30.1.2.2.1.1 |
docsRphyRpdIfPhysEntSensorScaleThis attribute reports a data scaling factor, represented
with an International System of Units (SI) prefix. The
actual data units are determined by examining this attribute
together with the associated SensorType attribute.
This attribute is defined together with SensorType and
Precision.
Together, these three attributes are used to identify the
semantics of the Value attribute.ro EntitySensorDataScale (ENTITY-SENSOR-MIB) .1.3.6.1.4.1.4491.2.1.30.1.2.2.1.2 |
docsRphyRpdIfPhysEntSensorPrecisionThis attribute reports the number of decimal places of
precision in fixed-point sensor values returned by the
associated Value attribute.
This attribute should be set to '0' when the associated
SensorType value is not a fixed-point type: e.g.,
'percentRH(9)', 'rpm(10)', 'cmm(11)', or 'truthvalue(12)'.ro EntitySensorPrecision (ENTITY-SENSOR-MIB) .1.3.6.1.4.1.4491.2.1.30.1.2.2.1.3 |
docsRphyRpdIfPhysEntSensorValueThis attribute reports the most recent measurement obtained
by the RPD for this sensor.
To correctly interpret the value of this object, the
associated SensorType, SensorScale, and
SensorPrecision attributes must also be examined.ro EntitySensorValue (ENTITY-SENSOR-MIB) .1.3.6.1.4.1.4491.2.1.30.1.2.2.1.4 |
docsRphyRpdIfPhysEntSensorOperStatusThe operational status of the sensor.ro EntitySensorStatus (ENTITY-SENSOR-MIB) .1.3.6.1.4.1.4491.2.1.30.1.2.2.1.5 |
docsRphyRpdIfPhysEntSensorUnitsDisplayA textual description of the data units that should be used
in the display of SensorValue.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.4491.2.1.30.1.2.2.1.6 |
docsRphyRpdIfPhysEntSensorValueTimeStampThis attribute reports the value of RpdSysUpTime at the
time the status and/or value of this sensor was last
obtained by the RPD.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.4491.2.1.30.1.2.2.1.7 |
docsRphyRpdIfPhysEntSensorValueUpdateRateThis attribute reports an indication of the frequency that
the CCAP Core updates the associated Value object,
represented in milliseconds.
The value zero indicates:
- the sensor value is updated on demand
- the sensor value is updated when the sensor
value changes (event-driven)
- the RPD does not know the update rate.ro Unsigned32 UNITS "milliseconds" .1.3.6.1.4.1.4491.2.1.30.1.2.2.1.8 |
docsRphyRpdIfEnetTableThis table provides details about the Ethernet interfaces
on the RPD. The attributes of this object are based on the
ifTable/ifXTable specified in RFC 2863.
The CCAP Core MUST create an instance of this object for
every Ethernet interface on the RPD.
See the reference for additional requirements. SEQUENCE OF DocsRphyRpdIfEnetEntry .1.3.6.1.4.1.4491.2.1.30.1.2.3 |
docsRphyRpdIfEnetEntryAn entry containing management information applicable to a
particular interface.
The Ethernet IfIndex is chosen by the RPD. DocsRphyRpdIfEnetEntry .1.3.6.1.4.1.4491.2.1.30.1.2.3.1 |
docsRphyRpdIfEnetPortIndexThis key attribute reports a unique index for this
Ethernet port interface. Unsigned32 .1.3.6.1.4.1.4491.2.1.30.1.2.3.1.1 |
docsRphyRpdIfEnetDescrA textual string containing information about the
interface. This string should include the name of the
manufacturer, the product name and the version of the
interface hardware/software.ro SnmpAdminString .1.3.6.1.4.1.4491.2.1.30.1.2.3.1.2 |
docsRphyRpdIfEnetNameThis attribute reports a textual string representing a
name that describes the interface. The CCAP Core MUST
populate this object with the ID that is used in GCP for
this port.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.4491.2.1.30.1.2.3.1.3 |
docsRphyRpdIfEnetAliasThis attribute reports an Alias for the interface. On the
first instantiation of an interface, the value of Alias
associated with that interface is the zero-length string.
As and when a value is written into an instance of Alias
through a network management operation, then the RPD
retains the supplied value in the Alias instance
associated with the same interface for as long as that
interface remains instantiated, including across all
re-initializations/reboots of the network management
system, including those which result in a change of the
interface's EnetPortIndex value.ro SnmpAdminString .1.3.6.1.4.1.4491.2.1.30.1.2.3.1.4 |
docsRphyRpdIfEnetTypeThis attribute reports the type of interface. Additional
values for Type are assigned by the Internet Assigned
Numbers Authority (IANA), through updating the syntax of
the IANAifType textual convention. The types are defined
in the IANAifType-MIB. The value reported by this
attribute is ethernetCsmacd.ro IANAifType (IANAifType-MIB) .1.3.6.1.4.1.4491.2.1.30.1.2.3.1.5 |
docsRphyRpdIfEnetMtuThis attribute reports the size of the largest packet which
can be sent/received on the interface, specified in octets.
For interfaces that are used for transmitting network
datagrams, this is the size of the largest network datagram
that can be sent on the interface.ro Integer32 .1.3.6.1.4.1.4491.2.1.30.1.2.3.1.6 |
docsRphyRpdIfEnetPhysAddressThis attribute reports the interface's address at its
protocol sub-layer. For example, for an 802.x interface,
this attribute normally contains a MAC address. The
interface's media-specific MIB defines the bit and byte
ordering and the format of the value of this attribute.
For interfaces which do not have such an address (e.g., a
serial line), this attribute reports an octet string of
zero length.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.4491.2.1.30.1.2.3.1.7 |
docsRphyRpdIfEnetAdminStatusThis attribute reports the state of the interface. The
testing(3) state indicates that no operational packets can
be passed. When a managed system initializes, all
interfaces start with AdminStatus in the down(2) state.
As a result of either explicit management action or per
configuration information retained by the managed system,
AdminStatus is then changed to either the up(1) or
testing(3) states (or remains in the down(2) state).ro Enumeration .1.3.6.1.4.1.4491.2.1.30.1.2.3.1.8 |
docsRphyRpdIfEnetOperStatusThis attribute reports the current operational state of
the interface. The testing(3) state indicates that no
operational packets can be passed. If AdminStatus is
down(2) then ifOperStatus should be down(2). If
AdminStatus is changed to up(1), then OperStatus should
change to up(1) if the interface is ready to transmit and
receive network traffic; it should change to dormant(5) if
the interface is waiting for external actions (such as a
serial line waiting for an incoming connection); it should
remain in the down(2) state if and only if there is a fault
that prevents it from going to the up(1) state; it should
remain in the notPresent(6) state if the interface has
missing (typically, hardware) components.ro Enumeration .1.3.6.1.4.1.4491.2.1.30.1.2.3.1.9 |
docsRphyRpdIfEnetLastChangeThis attribute reports the value of RpdSysUpTime at the
time the interface entered its current operational state.
If the current state was entered prior to the last
re-initialization of the local network management
subsystem, then this attribute reports a zero value.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.4491.2.1.30.1.2.3.1.10 |
docsRphyRpdIfEnetLinkUpDownTrapEnableThis attribute reports whether linkup/linkdown traps are
generated for this interface.
A value of true indicates that traps are enabled.
A value of false indicates that traps are disabled.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4491.2.1.30.1.2.3.1.11 |
docsRphyRpdIfEnetHighSpeedThis attribute reports an estimate of the interface's
current bandwidth in units of 1,000,000 bits per second.
If this attribute reports a value of 'n' then the speed of
the interface is somewhere in the range of 'n-500,000' to
'n+499,999'. For interfaces which do not vary in bandwidth
or for those where no accurate estimation can be made, this
attribute reports the nominal bandwidth.ro Gauge32 .1.3.6.1.4.1.4491.2.1.30.1.2.3.1.12 |
docsRphyRpdIfEnetPromiscuousModeThis attribute reports a value of '2' (false) if this
interface only accepts packets/frames that are addressed
to this interface.
This attribute reports a value of '1' (true) when the
station accepts all packets/frames transmitted on the media.
The value of PromiscuousMode does not affect the reception
of broadcast and multicast packets/frames by the interface.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4491.2.1.30.1.2.3.1.13 |
docsRphyRpdIfEnetConnectorPresentThis attribute reports the value 'true' if the interface
sublayer has a physical connector and the value 'false'
otherwise.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4491.2.1.30.1.2.3.1.14 |
docsRphyRpdIfEnetStatsTableThis table reports statistics for the Ethernet interfaces
on the RPD. The attributes of this object are based on the
ifTable/ifXTable specified in RFC 2863. The CCAP Core MUST
create an instance of this object for every EnetIf object
instance.
Discontinuities in the value of these counters can occur at
reinitialization of the managed system, and at other times as
indicated by the value of CounterDiscontinuityTime.
See the reference for additional requirements. SEQUENCE OF DocsRphyRpdIfEnetStatsEntry .1.3.6.1.4.1.4491.2.1.30.1.2.4 |
docsRphyRpdIfEnetStatsEntryAn entry containing statistical information
applicable to a particular RPD ethernet interface. DocsRphyRpdIfEnetStatsEntry .1.3.6.1.4.1.4491.2.1.30.1.2.4.1 |
docsRphyRpdIfEnetStatsInOctetsThe total number of octets received on the interface,
including framing characters.ro Counter64 .1.3.6.1.4.1.4491.2.1.30.1.2.4.1.1 |
docsRphyRpdIfEnetStatsOutOctetsThe total number of octets transmitted out of the
interface, including framing characters.ro Counter64 .1.3.6.1.4.1.4491.2.1.30.1.2.4.1.2 |
docsRphyRpdIfEnetStatsInFramesThe total number of frames received on the interface,
including framing characters.ro Counter64 .1.3.6.1.4.1.4491.2.1.30.1.2.4.1.3 |
docsRphyRpdIfEnetStatsOutFramesThe total number of frames transmitted out of the
interface, including framing characters.ro Counter64 .1.3.6.1.4.1.4491.2.1.30.1.2.4.1.4 |
docsRphyRpdIfEnetStatsInUnicastOctetsThe number of octets, delivered by this sub-layer to a
higher (sub-)layer, which were not addressed to a multicast
or broadcast address at this sub-layer.ro Counter64 .1.3.6.1.4.1.4491.2.1.30.1.2.4.1.5 |
docsRphyRpdIfEnetStatsOutUnicastOctetsThe total number of octets that higher-level protocols
requested be transmitted, and which were not addressed to a
multicast or broadcast address at this sub-layer, including
those that were discarded or not sent.ro Counter64 .1.3.6.1.4.1.4491.2.1.30.1.2.4.1.6 |
docsRphyRpdIfEnetStatsInUnicastFramesThe number of frames, delivered by this sub-layer to a
higher (sub-)layer, which were not addressed to a multicast
or broadcast address at this sub-layer.ro Counter64 .1.3.6.1.4.1.4491.2.1.30.1.2.4.1.7 |
docsRphyRpdIfEnetStatsOutUnicastFramesThe total number of frames that higher-level protocols
requested be transmitted, and which were not addressed to a
multicast or broadcast address at this sub-layer, including
those that were discarded or not sent.ro Counter64 .1.3.6.1.4.1.4491.2.1.30.1.2.4.1.8 |
docsRphyRpdIfEnetStatsInMulticastOctetsThe number of octets, delivered by this sub-layer to a
higher (sub-)layer, which were addressed to a multicast
address at this sub-layer. For a MAC layer protocol, this
includes both Group and Functional addresses.ro Counter64 .1.3.6.1.4.1.4491.2.1.30.1.2.4.1.9 |
docsRphyRpdIfEnetStatsOutMulticastOctetsThe total number of octets that higher-level protocols
requested be transmitted, and which were addressed to a
multicast address at this sub-layer, including those that
were discarded or not sent. For a MAC layer protocol, this
includes both Group and Functional addresses.ro Counter64 .1.3.6.1.4.1.4491.2.1.30.1.2.4.1.10 |
docsRphyRpdIfEnetStatsInMulticastFramesThe number of frames, delivered by this sub-layer to a
higher (sub-)layer, which were addressed to a multicast
address at this sub-layer. For a MAC layer protocol, this
includes both Group and Functional addresses.ro Counter64 .1.3.6.1.4.1.4491.2.1.30.1.2.4.1.11 |
docsRphyRpdIfEnetStatsOutMulticastFramesThe total number of frames that higher-level protocols
requested be transmitted, and which were addressed to a
multicast address at this sub-layer, including those that
were discarded or not sent. For a MAC layer protocol, this
includes both Group and Functional addresses.ro Counter64 .1.3.6.1.4.1.4491.2.1.30.1.2.4.1.12 |
docsRphyRpdIfEnetStatsInBroadcastOctetsThe number of octets, delivered by this sub-layer to a
higher (sub-)layer, which were addressed to a broadcast
address at this sub-layer.ro Counter64 .1.3.6.1.4.1.4491.2.1.30.1.2.4.1.13 |
docsRphyRpdIfEnetStatsOutBroadcastOctetsThe total number of octets that higher-level protocols
requested be transmitted, and which were addressed to a
broadcast address at this sub-layer, including those that
were discarded or not sent.ro Counter64 .1.3.6.1.4.1.4491.2.1.30.1.2.4.1.14 |
docsRphyRpdIfEnetStatsInBroadcastFramesThe number of frames, delivered by this sub-layer to a
higher (sub-)layer, which were addressed to a broadcast
address at this sub-layer.ro Counter64 .1.3.6.1.4.1.4491.2.1.30.1.2.4.1.15 |
docsRphyRpdIfEnetStatsOutBroadcastFramesThe total number of frames that higher-level protocols
requested be transmitted, and which were addressed to a
broadcast address at this sub-layer, including those that
were discarded or not sent.ro Counter64 .1.3.6.1.4.1.4491.2.1.30.1.2.4.1.16 |
docsRphyRpdIfEnetStatsInDiscardsThe number of inbound packets which were chosen to be
discarded even though no errors had been detected to prevent
their being deliverable to a higher-layer protocol. One
possible reason for discarding such a packet could be to
free up buffer space.ro Counter64 .1.3.6.1.4.1.4491.2.1.30.1.2.4.1.17 |
docsRphyRpdIfEnetStatsOutDiscardsThe number of outbound packets which were chosen to be
discarded even though no errors had been detected to prevent
their being transmitted. One possible reason for discarding
such a packet could be to free up buffer space.ro Counter64 .1.3.6.1.4.1.4491.2.1.30.1.2.4.1.18 |
docsRphyRpdIfEnetStatsInErrorsFor packet-oriented interfaces, the number of inbound
packets that contained errors preventing them from being
deliverable to a higher-layer protocol. For character-
oriented or fixed-length interfaces, the number of inbound
transmission units that contained errors preventing them
from being deliverable to a higher-layer protocol.ro Counter64 .1.3.6.1.4.1.4491.2.1.30.1.2.4.1.19 |
docsRphyRpdIfEnetStatsOutErrorsFor packet-oriented interfaces, the number of outbound
packets that could not be transmitted because of errors.
For character-oriented or fixed-length interfaces, the
number of outbound transmission units that could not be
transmitted because of errors.ro Counter64 .1.3.6.1.4.1.4491.2.1.30.1.2.4.1.20 |
docsRphyRpdIfEnetStatsInUnknownProtosFor packet-oriented interfaces, the number of packets
received via the interface which were discarded because of
an unknown or unsupported protocol. For character-oriented
or fixed-length interfaces that support protocol
multiplexing the number of transmission units received via
the interface which were discarded because of an unknown or
unsupported protocol. For any interface that does not
support protocol multiplexing, this counter will always be
0.ro Counter64 .1.3.6.1.4.1.4491.2.1.30.1.2.4.1.21 |
docsRphyRpdIfEnetStatsCounterDiscontinuityTimeThe value of sysUpTime on the most recent occasion at which
any one or more of this interface's counters suffered a
discontinuity. The relevant counters are the specific
instances associated with this interface of any Counter32 or
Counter64 object contained in the docsRphyRpdIfEnetStatsTable. If
no such discontinuities have occurred since the last re-
initialization of the local management subsystem, then this
object contains a zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.4491.2.1.30.1.2.4.1.22 |
docsRphyRpdIfRpdEnetToCoreEntityMapTableIf the RPD implements an Entity for an Ethernet port
(which is optional), this table provides the mapping
between the RPD's EnetPortIndex as signaled in GCP and
the corresponding docsRphyRpdIfPhysEntityIndex assigned
by the CCAP Core to report that entity.
See the reference for additional requirements. SEQUENCE OF DocsRphyRpdIfRpdEnetToCoreEntityMapEntry .1.3.6.1.4.1.4491.2.1.30.1.2.5 |
docsRphyRpdIfRpdEnetToCoreEntityMapEntryAn entry in docsRphyRpdIfRpdEnetToCoreEntityMapTable. DocsRphyRpdIfRpdEnetToCoreEntityMapEntry .1.3.6.1.4.1.4491.2.1.30.1.2.5.1 |
docsRphyRpdIfRpdEnetToCoreEntityMapEntityIndexThe value of this attribute must match the value of
docsRphyRpdIfPhysEntityIndex for the row in
docsRphyRpdIfPhysEntityTable that reports the RPD Ethernet
port signaled in GCP with EnetPortIndex.ro Unsigned32 .1.3.6.1.4.1.4491.2.1.30.1.2.5.1.1 |
docsRphyRpdIfCoreToRpdMapTableThis table maps certain CCAP Core ifTable interfaces
identified with an ifIndex to an RPD interface identified
in GCP.
See the reference for additional requirements. SEQUENCE OF DocsRphyRpdIfCoreToRpdMapEntry .1.3.6.1.4.1.4491.2.1.30.1.2.6 |
docsRphyRpdIfCoreToRpdMapEntryAn entry in docsRphyRpdIfCoreToRpdMapTable.
An entry exists for each RPD interface directly represented
in the CCAP ifTable. The IfIndex corresponds to
a CCAP Core ifIndex for one of the following interface
types implemented on an RPD:
- docsCableDownstream(128)
- docsCableUpstreamChannel(205)
- docsCableUpstreamRfPort(255)
- docsCableDownstreamRfPort(256)
- docsCableDownstreamOfdm(277)
- docsCableUpstreamOfdma(278)
Note that this table does not contain an instance for
ifType ethernetCsmacd(6) because the Ethernet ports of
the RPD are considered internal to a logical CCAP and
are not reported in the CCAP ifTable. DocsRphyRpdIfCoreToRpdMapEntry .1.3.6.1.4.1.4491.2.1.30.1.2.6.1 |
docsRphyRpdIfCoreToRpdMapRpdUniqueIdThis attribute specifies the MAC address associated with
the lowest numbered CIN facing Ethernet port. The value of
this attribute matches the value of the
docsRphyRpdDevInfoUniqueId attribute from the
docsRphyRpdDevInfoTable.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.4491.2.1.30.1.2.6.1.1 |
docsRphyRpdIfCoreToRpdMapRpdRfPortDirectionThis attribute reports the direction of an RF port, which
together with RpdRfPortIndex uniquely identifies an RF
port on the RPD. The RF port direction is signalled in the
GCP 'RfPortType' TLV 13.2 for an RF port interface or
implied by the value of the GCP 'RfChannelType' TLV 12.2
for an RF channel interface.ro IfDirection (DOCS-IF3-MIB) .1.3.6.1.4.1.4491.2.1.30.1.2.6.1.2 |
docsRphyRpdIfCoreToRpdMapRpdRfPortIndexThis attribute reports the Index of an RF port on an RPD,
which together with RpdRfPortDirection uniquely
identifies an RF port on the RPD. The value matches the
value signaled in GCP 'RfPortIndex' TLV 12.1 or the GCP
'RfPortIndex1' TLV 13.1.ro Unsigned32 .1.3.6.1.4.1.4491.2.1.30.1.2.6.1.3 |
docsRphyRpdIfCoreToRpdMapRpdRfChanTypeFor RF channel interfaces, This attribute reports the type
of the channel as signaled in the GCP 'RfChannelType'
TLV 12.2. For RF port interfaces, this attribute must be
set to other(0). Each value of this attribute corresponds
to a separate sequence of channel indices.ro RphyChannelType .1.3.6.1.4.1.4491.2.1.30.1.2.6.1.4 |
docsRphyRpdIfCoreToRpdMapRpdRfChanIndexFor interfaces corresponding to RF channels, this attribute
reports the channel of the type specified in
RpdRfChannelType, and matches the value signaled in the GCP
'RfChannelIndex' TLV 12.3. For RF port interfaces, this
attribute reports 0.ro Unsigned32 .1.3.6.1.4.1.4491.2.1.30.1.2.6.1.5 |
docsRphyRpdIfRpdToCoreMapTableThis table maps certain RPD interface identified via GCP
integers to an ifIndex reported by the CCAP Core. This
table instruments the same information as the
docsRphyRpdIfCoreToRpdMapTable, but with different indexing
than that table.
See the reference for additional requirements. SEQUENCE OF DocsRphyRpdIfRpdToCoreMapEntry .1.3.6.1.4.1.4491.2.1.30.1.2.7 |
docsRphyRpdIfRpdToCoreMapEntryAn entry in docsRphyRpdIfRpdToCoreMapTable.
An entry exists for each RPD interface directly represented
in the CCAP ifTable. The index 'CoreIfIndex' corresponds to
a CCAP core ifIndex for one of the following interface
types implemented on an RPD:
- docsCableDownstream(128)
- docsCableUpstreamChannel(205)
- docsCableUpstreamRfPort(255)
- docsCableDownstreamRfPort(256)
- docsCableDownstreamOfdm(277)
- docsCableUpstreamOfdma(278)
Note that this table does not contain an instance for
ifType ethernetCsmacd(6) because the Ethernet ports of
the RPD are considered internal to a logical CCAP and
are not reported in the CCAP ifTable. DocsRphyRpdIfRpdToCoreMapEntry .1.3.6.1.4.1.4491.2.1.30.1.2.7.1 |
docsRphyRpdIfRpdToCoreMapRpdRfPortDirectionThis attribute reports the direction of an RF port, which
together with RpdRfPortIndex uniquely identifies an RF
port on the RPD. The RF port direction is signalled in the
GCP 'RfPortType' TLV 13.2 for an RF port interface or
implied by the value of the GCP 'RfChannelType' TLV 12.2
for an RF channel interface. IfDirection (DOCS-IF3-MIB) .1.3.6.1.4.1.4491.2.1.30.1.2.7.1.1 |
docsRphyRpdIfRpdToCoreMapRpdRfPortIndexThis attribute reports the Index of an RF port on an RPD,
which together with RpdRfPortDirection uniquely
identifies an RF port on the RPD. The value matches the
value signaled in GCP 'RfPortIndex' TLV 12.1 or the GCP
'RfPortIndex1' TLV 13.1. Unsigned32 .1.3.6.1.4.1.4491.2.1.30.1.2.7.1.2 |
docsRphyRpdIfRpdToCoreMapRpdRfChanTypeFor RF channel interfaces, This attribute reports the type
of the channel as signaled in the GCP 'RfChannelType'
TLV 12.2. For RF port interfaces, this attribute must be
set to other(0). Each value of this attribute corresponds
to a separate sequence of channel indices. RphyChannelType .1.3.6.1.4.1.4491.2.1.30.1.2.7.1.3 |
docsRphyRpdIfRpdToCoreMapRpdRfChanIndexFor interfaces corresponding to RF channels, this attribute
reports the channel of the type specified in
RpdRfChannelType, and matches the value signaled in the GCP
'RfChannelIndex' TLV 12.3. For RF port interfaces, this
attribute reports 0. Unsigned32 .1.3.6.1.4.1.4491.2.1.30.1.2.7.1.4 |
docsRphyRpdIfRpdToCoreMapCoreIfIndexThis key attribute reports the CCAP Core IfIndex for the
RPD Interface identified in GCP.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4491.2.1.30.1.2.7.1.5 |
docsRphyRpdIpMibObjects OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.1.30.1.3 |
docsRphyRpdIpv4GrpTableThe table containing per-RPD IPv4-specific
information. SEQUENCE OF DocsRphyRpdIpv4GrpEntry .1.3.6.1.4.1.4491.2.1.30.1.3.1 |
docsRphyRpdIpv4GrpEntryAn entry containing IPv4-specific information for a specific
RPD. DocsRphyRpdIpv4GrpEntry .1.3.6.1.4.1.4491.2.1.30.1.3.1.1 |
docsRphyRpdIpv4GrpDefaultTTLThe default value inserted into the Time-To-Live field of
the IPv4 header of datagrams originated at this entity,
whenever a TTL value is not supplied by the transport layer
protocol.ro Integer32 .1.3.6.1.4.1.4491.2.1.30.1.3.1.1.1 |
docsRphyRpdIpv4GrpInterfaceTableLastChangeThis attribute reports the value of RpdSysUpTime on the
most recent occasion at which an instance of the
Ipv4Interface object was added or deleted, or when a
ReasmMaxSize or an EnableStatus attribute of the
Ipv4Interface object was modified.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.4491.2.1.30.1.3.1.1.2 |
docsRphyRpdIpv6GrpTableThe table containing per-RPD IPv6-specific
information. SEQUENCE OF DocsRphyRpdIpv6GrpEntry .1.3.6.1.4.1.4491.2.1.30.1.3.2 |
docsRphyRpdIpv6GrpEntryAn entry containing IPv6-specific information for a specific
RPD. DocsRphyRpdIpv6GrpEntry .1.3.6.1.4.1.4491.2.1.30.1.3.2.1 |
docsRphyRpdIpv6GrpIpDefaultHopLimitThe default value inserted into the Hop Limit field of the
IPv6 header of datagrams originated at this entity whenever
a Hop Limit value is not supplied by the transport layer
protocol.ro Integer32 .1.3.6.1.4.1.4491.2.1.30.1.3.2.1.1 |
docsRphyRpdIpv6GrpInterfaceTableLastChangeThis attribute reports the value of RpdSysUpTime on the
most recent occasion at which an instance of the
Ipv6Interface object was added or deleted or when a
ReasmMaxSize, InterfaceIdentifier, EnableStatus,
ReachableTime, RetransmitTime, or Forwarding attribute
of the Ipv6Interface object was modified.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.4491.2.1.30.1.3.2.1.2 |
docsRphyRpdIpv6GrpIfStatsTableLastChangeThis attribute reports the value of RpdSysUpTime on the most
recent occasion at which an instance of the ipIfStats object
was added or deleted.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.4491.2.1.30.1.3.2.1.3 |
docsRphyRpdIpv4InterfaceTableThe table containing per-interface IPv4-specific
information. SEQUENCE OF DocsRphyRpdIpv4InterfaceEntry .1.3.6.1.4.1.4491.2.1.30.1.3.3 |
docsRphyRpdIpv4InterfaceEntryAn entry containing IPv4-specific information for an RPD's
ethernet port. DocsRphyRpdIpv4InterfaceEntry .1.3.6.1.4.1.4491.2.1.30.1.3.3.1 |
docsRphyRpdIpv4InterfaceEnableStatusThe indication of whether IPv4 is enabled (up) or disabled
(down) on this interface. This object does not affect the
state of the interface itself, only its connection to an
IPv4 stack. The IF-MIB should be used to control the state
of the interface.ro Enumeration .1.3.6.1.4.1.4491.2.1.30.1.3.3.1.1 |
docsRphyRpdIpv4InterfaceRetransmitTimeThe time between retransmissions of ARP requests to a
neighbor when resolving the address or when probing the
reachability of a neighbor.ro Unsigned32 UNITS "milliseconds" .1.3.6.1.4.1.4491.2.1.30.1.3.3.1.2 |
docsRphyRpdIpv6InterfaceTableThe table containing per-interface IPv6-specific
information. SEQUENCE OF DocsRphyRpdIpv6InterfaceEntry .1.3.6.1.4.1.4491.2.1.30.1.3.4 |
docsRphyRpdIpv6InterfaceEntryAn entry containing IPv6-specific information for an RPD's
ethernet port. DocsRphyRpdIpv6InterfaceEntry .1.3.6.1.4.1.4491.2.1.30.1.3.4.1 |
docsRphyRpdIpv6InterfaceIdentifierThe Interface Identifier for this interface. The Interface
Identifier is combined with an address prefix to form an
interface address.
By default, the Interface Identifier is auto-configured
according to the rules of the link type to which this
interface is attached.
A zero length identifier may be used where appropriate.ro Ipv6AddressIfIdentifierTC (IP-MIB) .1.3.6.1.4.1.4491.2.1.30.1.3.4.1.1 |
docsRphyRpdIpv6InterfaceEnableStatusThe indication of whether IPv6 is enabled (up) or disabled
(down) on this interface. This object does not affect the
state of the interface itself, only its connection to an
IPv6 stack. The IF-MIB should be used to control the state
of the interface.ro Enumeration .1.3.6.1.4.1.4491.2.1.30.1.3.4.1.2 |
docsRphyRpdIpv6InterfaceReachableTimeThe time a neighbor is considered reachable after receiving
a reachability confirmation.ro Unsigned32 UNITS "milliseconds" .1.3.6.1.4.1.4491.2.1.30.1.3.4.1.3 |
docsRphyRpdIpv6InterfaceRetransmitTimeThe time between retransmissions of Neighbor Solicitation
messages to a neighbor when resolving the address or when
probing the reachability of a neighbor.ro Unsigned32 UNITS "milliseconds" .1.3.6.1.4.1.4491.2.1.30.1.3.4.1.4 |
docsRphyRpdIpIfStatsTableThis table provides statistics for IP Packets sent or
received by an RPD's own IP Address.
It is modeled after the IP-MIB IpIfStatsTable described in
RFC 4293; however, all counters are 64 bit.
Discontinuities in the value of these counters can occur at
re-initialization of the management system, and at other
times as indicated by the value of the DiscontinuityTime
attribute in this table. SEQUENCE OF DocsRphyRpdIpIfStatsEntry .1.3.6.1.4.1.4491.2.1.30.1.3.5 |
docsRphyRpdIpIfStatsEntryAn interface statistics entry containing objects for a
particular interface and version of IP. DocsRphyRpdIpIfStatsEntry .1.3.6.1.4.1.4491.2.1.30.1.3.5.1 |
docsRphyRpdIpIfStatsIPVersionThis key attribute reports the IP version of this entry. InetVersion (INET-ADDRESS-MIB) .1.3.6.1.4.1.4491.2.1.30.1.3.5.1.1 |
docsRphyRpdIpIfStatsInReceivesThe total number of input IP datagrams received, including
those received in error.ro Counter64 .1.3.6.1.4.1.4491.2.1.30.1.3.5.1.2 |
docsRphyRpdIpIfStatsInOctetsThe total number of octets received in input IP datagrams,
including those received in error.ro Counter64 .1.3.6.1.4.1.4491.2.1.30.1.3.5.1.3 |
docsRphyRpdIpIfStatsInHdrErrorsThe number of input IP datagrams discarded due to errors in
their IP headers, including version number mismatch, other
format errors, hop count exceeded, errors discovered in
processing their IP options, etc.ro Counter64 .1.3.6.1.4.1.4491.2.1.30.1.3.5.1.4 |
docsRphyRpdIpIfStatsInNoRoutesThe number of input IP datagrams discarded because no route
could be found to transmit them to their destination.ro Counter64 .1.3.6.1.4.1.4491.2.1.30.1.3.5.1.5 |
docsRphyRpdIpIfStatsInAddrErrorsThe number of input IP datagrams discarded because the IP
address in their IP header's destination field was not a
valid address to be received at this entity. This count
includes invalid addresses (e.g., ::0). For entities that
are not IP routers and therefore do not forward datagrams,
this counter includes datagrams discarded because the
destination address was not a local address.ro Counter64 .1.3.6.1.4.1.4491.2.1.30.1.3.5.1.6 |
docsRphyRpdIpIfStatsInUnknownProtosThe number of locally-addressed IP datagrams received
successfully but discarded because of an unknown or
unsupported protocol.
When tracking interface statistics, the counter of the
interface to which these datagrams were addressed is
incremented. This interface might not be the same as the
input interface for some of the datagrams.ro Counter64 .1.3.6.1.4.1.4491.2.1.30.1.3.5.1.7 |
docsRphyRpdIpIfStatsInTruncatedPktsThe number of input IP datagrams discarded because the
datagram frame didn't carry enough data.ro Counter64 .1.3.6.1.4.1.4491.2.1.30.1.3.5.1.8 |
docsRphyRpdIpIfStatsInDiscardsThe number of input IP datagrams for which no problems were
encountered to prevent their continued processing, but
were discarded (e.g., for lack of buffer space). Note that
this counter does not include any datagrams discarded while
awaiting re-assembly.ro Counter64 .1.3.6.1.4.1.4491.2.1.30.1.3.5.1.9 |
docsRphyRpdIpIfStatsInDeliversThe total number of datagrams successfully delivered to IP
user-protocols (including ICMP).ro Counter64 .1.3.6.1.4.1.4491.2.1.30.1.3.5.1.10 |
docsRphyRpdIpIfStatsOutRequestsThe total number of IP datagrams that local IP user-
protocols (including ICMP) supplied to IP in requests for
transmission.ro Counter64 .1.3.6.1.4.1.4491.2.1.30.1.3.5.1.11 |
docsRphyRpdIpIfStatsOutDiscardsThe number of output IP datagrams for which no problem was
encountered to prevent their transmission to their
destination, but were discarded (e.g., for lack of
buffer space). Note that this counter would include
datagrams counted in docsRphyRpdIpIfStatsOutForwDatagrams if any such
datagrams met this (discretionary) discard criterion.ro Counter64 .1.3.6.1.4.1.4491.2.1.30.1.3.5.1.12 |
docsRphyRpdIpIfStatsOutTransmitsThe total number of IP datagrams that this entity supplied
to the lower layers for transmission.ro Counter64 .1.3.6.1.4.1.4491.2.1.30.1.3.5.1.13 |
docsRphyRpdIpIfStatsOutOctetsThe total number of octets in IP datagrams delivered to the
lower layers for transmission.ro Counter64 .1.3.6.1.4.1.4491.2.1.30.1.3.5.1.14 |
docsRphyRpdIpIfStatsInMcastPktsThe number of IP multicast datagrams received.ro Counter64 .1.3.6.1.4.1.4491.2.1.30.1.3.5.1.15 |
docsRphyRpdIpIfStatsInMcastOctetsThe total number of octets received in IP multicast
datagrams.ro Counter64 .1.3.6.1.4.1.4491.2.1.30.1.3.5.1.16 |
docsRphyRpdIpIfStatsOutMcastPktsThe number of IP multicast datagrams transmitted.ro Counter64 .1.3.6.1.4.1.4491.2.1.30.1.3.5.1.17 |
docsRphyRpdIpIfStatsOutMcastOctetsThe total number of octets transmitted in IP multicast
datagrams.ro Counter64 .1.3.6.1.4.1.4491.2.1.30.1.3.5.1.18 |
docsRphyRpdIpIfStatsDiscontinuityTimeThe value of sysUpTime on the most recent occasion at which
any one or more of this entry's counters suffered a
discontinuity.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.4491.2.1.30.1.3.5.1.19 |
docsRphyRpdIpIfStatsRefreshRateThe minimum reasonable polling interval for this entry.
This object provides an indication of the minimum amount of
time required to update the counters in this entry.ro Unsigned32 UNITS "milli-seconds" .1.3.6.1.4.1.4491.2.1.30.1.3.5.1.20 |
docsRphyRpdIpAddressTableThis table contains addressing information relevant to the
entity's interfaces.
This table does not contain multicast address information.
Note well: When including IPv6 link-local addresses in this
table, the entry must use an InetAddressType of 'docsRphyRpdIpv6z' in
order to differentiate between the possible interfaces. SEQUENCE OF DocsRphyRpdIpAddressEntry .1.3.6.1.4.1.4491.2.1.30.1.3.6 |
docsRphyRpdIpAddressEntryAn address mapping for a particular interface. DocsRphyRpdIpAddressEntry .1.3.6.1.4.1.4491.2.1.30.1.3.6.1 |
docsRphyRpdIpAddressAddrTypeThe address type of docsRphyRpdIpAddressAddr. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.4491.2.1.30.1.3.6.1.1 |
docsRphyRpdIpAddressAddrThe IP address to which this entry's addressing information
pertains. The address type of this object is specified in
AddrType.
Implementors need to be aware that if the size of
Addr exceeds 116 octets, then OIDS of instances of
columns in this row will have more than 128 sub-identifiers
and cannot be accessed using SNMPv1, SNMPv2c, or SNMPv3. InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.4491.2.1.30.1.3.6.1.2 |
docsRphyRpdIpAddressEnetPortIndexThis attribute reports a unique index for this
Ethernet port interface.ro Unsigned32 .1.3.6.1.4.1.4491.2.1.30.1.3.6.1.3 |
docsRphyRpdIpAddressTypeThe type of address. broadcast(3) is not a valid value for
IPv6 addresses (RFC 3513).ro Enumeration .1.3.6.1.4.1.4491.2.1.30.1.3.6.1.4 |
docsRphyRpdIpAddressPrefixLenThis attribute reports the prefix length associated
with this address.ro InetAddressPrefixLength (INET-ADDRESS-MIB) .1.3.6.1.4.1.4491.2.1.30.1.3.6.1.5 |
docsRphyRpdIpAddressOriginThe origin of the address.ro IpAddressOriginTC (IP-MIB) .1.3.6.1.4.1.4491.2.1.30.1.3.6.1.6 |
docsRphyRpdIpAddressStatusThe status of the address, describing if the address can be
used for communication.
In the absence of other information, an IPv4 address is
always preferred(1).ro IpAddressStatusTC (IP-MIB) .1.3.6.1.4.1.4491.2.1.30.1.3.6.1.7 |
docsRphyRpdIpAddressCreatedThe value of sysUpTime at the time this entry was created.
If this entry was created prior to the last re-
initialization of the local network management subsystem,
then this object contains a zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.4491.2.1.30.1.3.6.1.8 |
docsRphyRpdIpAddressLastChangedThe value of sysUpTime at the time this entry was last
updated. If this entry was updated prior to the last re-
initialization of the local network management subsystem,
then this object contains a zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.4491.2.1.30.1.3.6.1.9 |
docsRphyRpdIpNetToPhysicalTableThe IP Address Translation table used for mapping from IP
addresses to physical addresses.
The Address Translation tables contain the IP address to
'physical' address equivalences. Some interfaces do not use
translation tables for determining address equivalences
(e.g., DDN-X.25 has an algorithmic method); if all
interfaces are of this type, then the Address Translation
table is empty, i.e., has zero entries.
While many protocols may be used to populate this table, ARP
and Neighbor Discovery are the most likely
options. SEQUENCE OF DocsRphyRpdIpNetToPhysicalEntry .1.3.6.1.4.1.4491.2.1.30.1.3.7 |
docsRphyRpdIpNetToPhysicalEntryEach entry contains one IP address to `physical' address
equivalence. DocsRphyRpdIpNetToPhysicalEntry .1.3.6.1.4.1.4491.2.1.30.1.3.7.1 |
docsRphyRpdIpNetToPhysicalNetAddressTypeThe type of NetAddress. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.4491.2.1.30.1.3.7.1.1 |
docsRphyRpdIpNetToPhysicalNetAddressThe IP Address corresponding to the media-dependent
'physical' address. The address type of this object is
specified in AddressType.
Implementors need to be aware that if the size of
NetAddress exceeds 115 octets, then OIDS of
instances of columns in this row will have more than 128
sub-identifiers and cannot be accessed using SNMPv1,
SNMPv2c, or SNMPv3. InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.4491.2.1.30.1.3.7.1.2 |
docsRphyRpdIpNetToPhysicalPhysAddressThe media-dependent 'physical' address.ro PhysAddress .1.3.6.1.4.1.4491.2.1.30.1.3.7.1.3 |
docsRphyRpdIpNetToPhysicalLastUpdatedThis attribute reports the value of RpdSysUpTime at the time
this entry was last updated. If this entry was updated
prior to the last re-initialization of the local network
management subsystem, then this attribute contains a
zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.4491.2.1.30.1.3.7.1.4 |
docsRphyRpdIpNetToPhysicalTypeThe type of mapping. It is an
implementation-specific matter as to whether the agent
removes an invalidated entry from the table. Accordingly,
management stations must be prepared to receive tabular
information from agents that corresponds to entries not
currently in use. Proper interpretation of such entries
requires examination of the relevant Type
attribute.
The 'dynamic(3)' type indicates that the IP address to
physical addresses mapping has been dynamically resolved
using e.g., IPv4 ARP or the IPv6 Neighbor Discovery
protocol.
The 'static(4)' type indicates that the mapping has been
statically configured. Both of these refer to entries that
provide mappings for other entities addresses.
The 'local(5)' type indicates that the mapping is provided
for an entity's own interface address.ro Enumeration .1.3.6.1.4.1.4491.2.1.30.1.3.7.1.5 |
docsRphyRpdIpNetToPhysicalStateThe Neighbor Unreachability Detection state for the
interface when the address mapping in this entry is used.
If Neighbor Unreachability Detection is not in use (e.g. for
IPv4), this object is always unknown(6).ro Enumeration .1.3.6.1.4.1.4491.2.1.30.1.3.7.1.6 |
docsRphyRpdIpDefaultRouterTableThe table used to describe the default routers known to the
RPD. SEQUENCE OF DocsRphyRpdIpDefaultRouterEntry .1.3.6.1.4.1.4491.2.1.30.1.3.8 |
docsRphyRpdIpDefaultRouterEntryEach entry contains information about a default router known
to the RPD. DocsRphyRpdIpDefaultRouterEntry .1.3.6.1.4.1.4491.2.1.30.1.3.8.1 |
docsRphyRpdIpDefaultRouterAddressTypeThis key attribute reports the type of IP address in the
Address attribute. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.4491.2.1.30.1.3.8.1.1 |
docsRphyRpdIpDefaultRouterAddressThe IP address of the default router represented by this
row. The address type of this object is specified in
AddressType.
Implementers need to be aware that if the size of
Address exceeds 115 octets, then OIDS of
instances of columns in this row will have more than 128
sub-identifiers and cannot be accessed using SNMPv1,
SNMPv2c, or SNMPv3. InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.4491.2.1.30.1.3.8.1.2 |
docsRphyRpdIpDefaultRouterLifetimeThe remaining length of time, in seconds, that this router
will continue to be useful as a default router. A value of
zero indicates that it is no longer useful as a default
router. It is left to the implementer of the MIB as to
whether a router with a lifetime of zero is removed from the
list.
For IPv6, this value should be extracted from the router
advertisement messages.ro Unsigned32 .1.3.6.1.4.1.4491.2.1.30.1.3.8.1.3 |
docsRphyRpdIpDefaultRouterPreferenceAn indication of preference given to this router as a
default router as described in the Default Router
Preferences document. Treating the value as a
2 bit signed integer allows for simple arithmetic
comparisons.
For IPv4 routers or IPv6 routers that are not using the
updated router advertisement format, this object is set to
medium (0).ro Enumeration .1.3.6.1.4.1.4491.2.1.30.1.3.8.1.4 |
docsRphyRpdIpIcmpMibObjects OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.1.30.1.3.9 |
docsRphyRpdIpIcmpMsgStatsTableThe table of system-wide per-version, per-message type ICMP
counters. SEQUENCE OF DocsRphyRpdIpIcmpMsgStatsEntry .1.3.6.1.4.1.4491.2.1.30.1.3.9.1 |
docsRphyRpdIpIcmpMsgStatsEntryA conceptual row in the docsRphyRpdIpIcmpMsgStatsTable.
The system should track each ICMP type value, even if that
ICMP type is not supported by the system. However, a
given row need not be instantiated unless a message of that
type has been processed, i.e., the row for
Type=X MAY be instantiated before but is required to be
instantiated after the first message with Type=X is
received or transmitted. After receiving or transmitting
any succeeding messages with Type=X, the relevant counter
must be incremented. DocsRphyRpdIpIcmpMsgStatsEntry .1.3.6.1.4.1.4491.2.1.30.1.3.9.1.1 |
docsRphyRpdIpIcmpMsgStatsIPVersionThe IP version of the statistics. Statistics are provided for
each IP version supported. InetVersion (INET-ADDRESS-MIB) .1.3.6.1.4.1.4491.2.1.30.1.3.9.1.1.1 |
docsRphyRpdIpIcmpMsgStatsTypeThe ICMP type field of the message type being counted by
this row.
Note that ICMP message types are scoped by the address type
in use. Integer32 .1.3.6.1.4.1.4491.2.1.30.1.3.9.1.1.2 |
docsRphyRpdIpIcmpMsgStatsInPktsThe number of input packets for this AF and type.ro Counter64 .1.3.6.1.4.1.4491.2.1.30.1.3.9.1.1.3 |
docsRphyRpdIpIcmpMsgStatsOutPktsThe number of output packets for this AF and type.ro Counter64 .1.3.6.1.4.1.4491.2.1.30.1.3.9.1.1.4 |
docsRphyCcapMibObjects OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.1.30.1.4 |
docsRphyCcapL2tpSessionInfoTableThis table provides details for every session that
terminates at the CCAP Core from the CCAP Core's point
of view. There will be multiple sessions for each RPD
with which the CCAP Core is associated. SEQUENCE OF DocsRphyCcapL2tpSessionInfoEntry .1.3.6.1.4.1.4491.2.1.30.1.4.1 |
docsRphyCcapL2tpSessionInfoEntryThe conceptual row of docsRphyCcapL2tpSessionInfoTable.
A row entry is created for every session the CCAP-Core
terminates. DocsRphyCcapL2tpSessionInfoEntry .1.3.6.1.4.1.4491.2.1.30.1.4.1.1 |
docsRphyCcapL2tpSessionInfoLocalLcceIpAddrTypeThis attribute indicates whether the IP address provide in
docsRphyCcapL2tpSessionInfoLocalLcceIpAddr is IPv4 or IPv6. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.4491.2.1.30.1.4.1.1.1 |
docsRphyCcapL2tpSessionInfoLocalLcceIpAddrThis attribute provides the local LCCE IP address on the
CCAP Core of the session detailed in the row entry. InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.4491.2.1.30.1.4.1.1.2 |
docsRphyCcapL2tpSessionInfoLocalIdThis attribute provides the value of the session ID
assigned to the session by the CCAP Core. Unsigned32 .1.3.6.1.4.1.4491.2.1.30.1.4.1.1.3 |
docsRphyCcapL2tpSessionInfoRemoteLcceIpAddrTypeThis attribute indicates whether the IP address provide in
docsRphyCcapL2tpSessionInfoRemoteLcceIpAddr is IPv4 or IPv6.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.4491.2.1.30.1.4.1.1.4 |
docsRphyCcapL2tpSessionInfoRemoteLcceIpAddrThis attribute provides the remote-side LCCE IP address
of the session detailed in the row entry.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.4491.2.1.30.1.4.1.1.5 |
docsRphyCcapL2tpSessionInfoRemoteIdThis attribute provides the value of the session ID
assigned to the session by the remote peer
(CCAP Core).ro Unsigned32 .1.3.6.1.4.1.4491.2.1.30.1.4.1.1.6 |
docsRphyCcapL2tpSessionInfoCoreIdThis attribute provides the MAC address of the CCAP Core
with which this session terminates. The CCAP Core sends its
MAC address to the RPD periodically via the DOCSIS SYNC MAC
Message in the Source Address field.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.4491.2.1.30.1.4.1.1.7 |
docsRphyCcapL2tpSessionInfoConnCtrlIDThis attribute indicates the control connection
identifier (CCID) for this session.ro Unsigned32 .1.3.6.1.4.1.4491.2.1.30.1.4.1.1.8 |
docsRphyCcapL2tpSessionInfoUdpPortThis attribute provides the UDP Port reported by the
CCAP Core when the DEPI session uses L2TPv3 Header Over
UDP. This attribute reports a value of 0 when the session
is running with the L2TPv3 Session IP Header.
This port number is negotiated between the CCAP Core and
the RPD according to the L2TPv3 RFC.ro InetPortNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.4491.2.1.30.1.4.1.1.9 |
docsRphyCcapL2tpSessionInfoDescrThis attribute provides an ASCII string constructed with
the form:
RemoteEndId=(pp:mmm:ccc), ...
{ repeated for multiple endpoints }
where
pp is the 0-based port num signaled in the RemoteEndId AVP
mmm is the channel-type enum value from the RemoteEndId AVP
ccc is the channel number from the RemoteEndId AVP.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.4491.2.1.30.1.4.1.1.10 |
docsRphyCcapL2tpSessionInfoSessionTypeThis attribute specifies whether the session is an MPT
session or PSP session.ro Enumeration .1.3.6.1.4.1.4491.2.1.30.1.4.1.1.11 |
docsRphyCcapL2tpSessionInfoSessionSubTypeThis attribute specifies the type of DEPI MPT or DEPI
PSP session.ro Enumeration .1.3.6.1.4.1.4491.2.1.30.1.4.1.1.12 |
docsRphyCcapL2tpSessionInfoMaxPayloadThis attribute indicates the maximum MTU negotiated between
the CCAP Core and the RPD during the session establishment
process. The MTU is the layer 3 payload of a layer 2
frame.ro Unsigned32 .1.3.6.1.4.1.4491.2.1.30.1.4.1.1.13 |
docsRphyCcapL2tpSessionInfoPathPayloadThis attribute indicates the maximum MTU traversing the CIN
from CCAP Core to the RPD. This is calculated by the CCAP
Core by procedures such as MTU discovery as described in
the DEPI specification.ro Unsigned32 .1.3.6.1.4.1.4491.2.1.30.1.4.1.1.14 |
docsRphyCcapL2tpSessionInfoRpdIfMtuThis attribute provides the RPD's CIN interface MTU and is
read as the value of the following L2TPV3 AVP transmitted
by the RPD during session setup:
DEPI Downstream PW UEPI Upstream PW
DEPI Remote MTU AVP (ICRP) UEPI Remote MTU AVP (ICRP).ro Unsigned32 .1.3.6.1.4.1.4491.2.1.30.1.4.1.1.15 |
docsRphyCcapL2tpSessionInfoCoreIfMtuThis attribute provides the CCAP Core's CIN interface MTU
and is read as the value of the following L2TPv3 AVP as
received by the device during session setup:
DEPI Downstream PW UEPI Upstream PW
DEPI Local MTU AVP (ICRQ) UEPI Local MTU AVP (ICRQ).ro Unsigned32 .1.3.6.1.4.1.4491.2.1.30.1.4.1.1.16 |
docsRphyCcapL2tpSessionInfoIncludeDOCSISMsgsThis attribute returns true if the CCAP Core includes
DOCSIS MAP messages and other MAC Management messages
in the interface entry associated with this control
entry. The CCAP Core determines whether the interface
includes DOCSIS messages as part of the payload.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4491.2.1.30.1.4.1.1.17 |
docsRphyCcapL2tpSessionInfoErrorCodeThe error code raised when the session is in an error
state.
'invalidMACInterfaceValue'
Indicates wrong assignment of the CCAP Core MAC interface
ifIndex.
'invalidInterfaceValue'
Indicates wrong assignment of the CCAP Core Downstream
interface ifIndex
'noResourcesForInterfaceIfIndex'
Indicates the CCAP Core has no more resources to
assign a session to this entry.
'l2tpv3Error'
An L2TPv3 StopCCN or CDN message was issued
'ifAdminStatusSetToDown'
Indicates the ifAdminStatus was set to down and the
session was torn down.ro Enumeration .1.3.6.1.4.1.4491.2.1.30.1.4.1.1.18 |
docsRphyCcapL2tpSessionInfoCreationTimeThe attribute contains the sysUptime when the entry was
turned active.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.4491.2.1.30.1.4.1.1.19 |
docsRphyCcapL2tpSessionInfoOperStatusThis attribute provides the current status of the
pseudowire from the point of view of the specific
reporting entity (CCAP-Core).
Values are as follows:
'other'
indicates a vendor-specific operational status.
'up'
indicates that the pseudowire is ready to pass packets.
'down'
indicates that pseudowire signaling is not yet finished,
or indications available at the service level indicate
that the pseudowire is not passing packets.
'testing'
indicates that AdminStatus at the pseudowire level is
set to test.
'dormant'
indicates that the pseudowire is not in a condition to
pass packets but is in a 'pending' state, waiting for
some external event.
'notPresent'
indicates that some component is missing to accomplish
the setup of the pseudowire. It can be a configuration
error, incomplete configuration, or a missing H/W
component.
'lowerLayerDown'
indicates one or more of the lower-layer
interfaces responsible for running the underlying PSN
is not in OperStatus 'up' state.ro Enumeration .1.3.6.1.4.1.4491.2.1.30.1.4.1.1.20 |
docsRphyCcapL2tpSessionInfoLocalStatusThe attribute provides the status of the pseudowire
in the local node. If the 'other' bit is set, it indicates
that an additional vendor-specific status is reported.
If none of the bits are set, it indicates no faults are
reported.ro Bits .1.3.6.1.4.1.4491.2.1.30.1.4.1.1.21 |
docsRphyCcapL2tpSessionInfoLastChangeThe attribute provides the value of sysUpTime
when the session entered its current OperStatus
state from the point of view of the specific
reporting entity (CCAP-Core).ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.4491.2.1.30.1.4.1.1.22 |
docsRphyCcapL2tpSessionFlowTableThis table represents a PSP Flow of L2TP session or for
those sessions, which do not have PSP Flows, represents
entire session. In the latter case the PSP Flow Id by
convention is zero. SEQUENCE OF DocsRphyCcapL2tpSessionFlowEntry .1.3.6.1.4.1.4491.2.1.30.1.4.2 |
docsRphyCcapL2tpSessionFlowEntryThe conceptual row of docsRphyCcapL2tpSessionFlowTable.
This is an extension to
docsRphyCcapL2tpSessionInfoTable for the CCAP Core. DocsRphyCcapL2tpSessionFlowEntry .1.3.6.1.4.1.4491.2.1.30.1.4.2.1 |
docsRphyCcapL2tpSessionFlowPspFlowIdThis attribute identifies a PSP Flow within the session.
For sessions which do not have PSP Flows, this attribute
is zero.ro Unsigned32 .1.3.6.1.4.1.4491.2.1.30.1.4.2.1.1 |
docsRphyCcapL2tpSessionStatsTableThis table provides statistics for every session that
terminates at the CCAP-Core from the CCAP Core's point of
view. It also provides statistics about each tunnel
session between the RPD and each CCAP Core with which the
RPD is associated from the RPD's point of view. SEQUENCE OF DocsRphyCcapL2tpSessionStatsEntry .1.3.6.1.4.1.4491.2.1.30.1.4.3 |
docsRphyCcapL2tpSessionStatsEntryThe conceptual row of docsRphyCcapL2tpSessionStatsTable.
This table is an augmentation of
docsRphyCcapL2tpSessionFlowTable. DocsRphyCcapL2tpSessionStatsEntry .1.3.6.1.4.1.4491.2.1.30.1.4.3.1 |
docsRphyCcapL2tpSessionStatsOutOfSeqPktsThis attribute indicates the count of session packets that
were received out of sequence from the point of view of the
reporting entity. It is vendor dependent the re-sequence of
packets. Implementations that do not re-sequence packets
also increase the value of ifInDiscards for the respective
entry.ro Counter32 .1.3.6.1.4.1.4491.2.1.30.1.4.3.1.1 |
docsRphyCcapCinDsLatencyTableThis table provides measurements on the latency on the CIN
link for the session as measured by the CCAP-Core. These
measurements are based on the DEPI latency measurement,
specified in the Remote Downstream External PHY Interface
Specification. SEQUENCE OF DocsRphyCcapCinDsLatencyEntry .1.3.6.1.4.1.4491.2.1.30.1.4.4 |
docsRphyCcapCinDsLatencyEntryThe conceptual row of docsRphyCcapCinLatencyTable.
A row entry is created for every session the CCAP Core
terminates. This table is an augmentation of
docsRphyCcapL2tpSessionFlowTable for the CCAP Core. DocsRphyCcapCinDsLatencyEntry .1.3.6.1.4.1.4491.2.1.30.1.4.4.1 |
docsRphyCcapCinDsLatencyLastValThis attribute indicates the latest latency measurement
on this session.ro Unsigned32 .1.3.6.1.4.1.4491.2.1.30.1.4.4.1.1 |
docsRphyCcapCinDsLatencyLastValTimeThis attribute indicates the sysUpTime value of the last
time the docsRphyCcapCinLatencyPerfLastVal attribute was
updated.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.4491.2.1.30.1.4.4.1.2 |
docsRphyCcapCinDsLatencyIntervalThis attribute provides the time interval used to measure
periodically the CIN latency per DEPI session. Active
measurement of CIN latency applies to active DEPI sessions
only. This attribute is constrained to 420 seconds to
prevent Master Clock counter overruns. A value zero
indicates no CIN latency measurements are configured to
be performed.ro Unsigned32 .1.3.6.1.4.1.4491.2.1.30.1.4.4.1.3 |
docsRphyCcapSessionCinDsLatencyStatsTableThis table provides sequence of recent measurements of the
CIN latency on the network as measured by the CCAP Core.
When the table is full, the oldest measurement is
replaced with a new one. This table is based on the
docsIfMCmtsDepiSessionCinLatencyPerfTable object defined
in the DOCS-IF-M-CMTS-MIB and has been extended for
Remote PHY. SEQUENCE OF DocsRphyCcapSessionCinDsLatencyStatsEntry .1.3.6.1.4.1.4491.2.1.30.1.4.5 |
docsRphyCcapSessionCinDsLatencyStatsEntryThe conceptual row of docsRphyCcapSessionCinDsLatencyStatsTable.
A row entry is created for every session the CCAP Core
terminates. This is an extension to
docsRphyCcapL2tpSessionFlowTable for the CCAP Core. DocsRphyCcapSessionCinDsLatencyStatsEntry .1.3.6.1.4.1.4491.2.1.30.1.4.5.1 |
docsRphyCcapSessionCinDsLatencyStatsIntervalSeqThis attribute indicates the interval sequence where the
CIN latency measurement was taken. It is valid in an
implementation that overrides the oldest sequence number
entry with the most recent measurement. Unsigned32 .1.3.6.1.4.1.4491.2.1.30.1.4.5.1.1 |
docsRphyCcapSessionCinDsLatencyStatsValThis attribute indicates the CIN latency value measured
for the session referenced by this entry.ro Unsigned32 .1.3.6.1.4.1.4491.2.1.30.1.4.5.1.2 |
docsRphyCcapSessionCinDsLatencyStatsValTimeThis attribute provides the sysUpTime value for the last
time docsRphyCcapCinLatencyPerfVal was updated.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.4491.2.1.30.1.4.5.1.3 |
docsRphyCcapSecMibObjects OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.1.30.1.5 |
docsRphyCcapSecServerCertSubjectThis attribute represents the subject name exactly as
it is encoded in the X509 certificate. The organizationName
portion of the certificate's subject name must be present.
All other fields are optional. Any optional field present
must be prepended with <CR> (carriage return, U+000D)
<LF> (line feed, U+000A).
Ordering of fields present must conform to the following:
organizationName <CR> <LF>
countryName <CR> <LF>
stateOrProvinceName <CR> <LF>
localityName <CR> <LF>
organizationalUnitName <CR> <LF>
organizationalUnitName=<Manufacturing Location> <CR> <LF>
commonNamero SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.4491.2.1.30.1.5.1 |
docsRphyCcapSecServerCertIssuerThis attribute represents the issuer name exactly as it is
encoded in the X509 certificate. The commonName portion of
the certificate's issuer name must be present. All other
fields are optional. Any optional field present must be
prepended with <CR> (carriage return, U+000D) <LF> (line feed, U+000A).
Ordering of fields present must conform to the following:
commonName <CR> <LF>
countryName <CR> <LF>
stateOrProvinceName <CR> <LF>
localityName <CR> <LF>
organizationalUnitName <CR> <LF>
organizationalUnitName=<Manufacturing Location>ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.4491.2.1.30.1.5.2 |
docsRphyCcapSecServerCertSerialNumberThis attribute represents the certificate's serial number,
represented as an octet string.ro OCTET STRING .1.3.6.1.4.1.4491.2.1.30.1.5.3 |
docsRphyCcapSecServerCertSourceThis attribute indicates how the certificate reached the
CCAP Core. Other (4) means that it originated from a source
not identified above.ro Enumeration .1.3.6.1.4.1.4491.2.1.30.1.5.4 |
docsRphyCcapSecServerCertCertThis attribute represents an X509 DER-encoded CCAP Core certificate.ro DocsX509ASN1DEREncodedCertificate (DOCS-IETF-BPI2-MIB) .1.3.6.1.4.1.4491.2.1.30.1.5.5 |
docsRphyCcapSecServerCertCertThumbprintThis attribute represents the SHA-1 hash of the
CCAP Core certificate.ro OCTET STRING .1.3.6.1.4.1.4491.2.1.30.1.5.6 |
docsRphyConformance OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.1.30.2 |
docsRphyCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.1.30.2.1 |
docsRphyGroups OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.1.30.2.2 |