Home/Catalog/DOCS-IETF-BPI2-MIB

DOCS-IETF-BPI2-MIB

This is the MIB module for the DOCSIS Baseline Privacy Plus Interface (BPI+) at cable modems (CMs) and cable modem termination systems (CMTSs). Copyright (C) The Internet Society (2004). This version of this MIB module is part of RFC XXXX; see the RFC itself for full legal notices.
Main OID:
docsIetfBpi2MIB.1.3.6.1.2.1.9999
190
Objects
Active
Status
6
Dependencies

Imported Objects

Objects

190 total
Object Name
docsIetfBpi2MIBThis is the MIB module for the DOCSIS Baseline Privacy Plus Interface (BPI+) at cable modems (CMs) and cable modem termination systems (CMTSs). Copyright (C) The Internet Society (2004). This version of this MIB module is part of RFC XXXX; see the RFC itself for full legal notices.
MODULE-IDENTITY
.1.3.6.1.2.1.9999
docsIetfBpi2Notification
OBJECT IDENTIFIER
.1.3.6.1.2.1.9999.0
docsIetfBpi2MIBObjects
OBJECT IDENTIFIER
.1.3.6.1.2.1.9999.1
docsIetfBpi2CmObjects
OBJECT IDENTIFIER
.1.3.6.1.2.1.9999.1.1
docsIetfBpi2CmBaseTableThis table describes the basic and authorization related Baseline Privacy Plus attributes of each CM MAC interface.
SEQUENCE OF DocsBpi2CmBaseEntry
.1.3.6.1.2.1.9999.1.1.1
docsIetfBpi2CmBaseEntryEach entry contains objects describing attributes of one CM MAC interface. An entry in this table exists for each ifEntry with an ifType of docsCableMaclayer(127).
DocsBpi2CmBaseEntry
.1.3.6.1.2.1.9999.1.1.1.1
docsIetfBpi2CmPrivacyEnableThis object identifies whether this CM is provisioned to run Baseline Privacy Plus.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.2.1.9999.1.1.1.1.1
docsIetfBpi2CmPublicKeyThe value of this object is a DER-encoded RSAPublicKey ASN.1 type string, as defined in the RSA Encryption Standard (PKCS #1), corresponding to the public key of the CM.ro
OCTET STRING
.1.3.6.1.2.1.9999.1.1.1.1.2
docsIetfBpi2CmAuthStateThe value of this object is the state of the CM authorization FSM. The start state indicates that FSM is in its initial state.ro
Enumeration
.1.3.6.1.2.1.9999.1.1.1.1.3
docsIetfBpi2CmAuthKeySequenceNumberThe value of this object is the most recent authorization key sequence number for this FSM.ro
Integer32
.1.3.6.1.2.1.9999.1.1.1.1.4
docsIetfBpi2CmAuthExpiresOldThe value of this object is the actual clock time for expiration of the immediate predecessor of the most recent authorization key for this FSM. If this FSM has only one authorization key, then the value is the time of activation of this FSM.ro
DateAndTime (SNMPv2-TC)
.1.3.6.1.2.1.9999.1.1.1.1.5
docsIetfBpi2CmAuthExpiresNewThe value of this object is the actual clock time for expiration of the most recent authorization key for this FSM.ro
DateAndTime (SNMPv2-TC)
.1.3.6.1.2.1.9999.1.1.1.1.6
docsIetfBpi2CmAuthResetSetting this object to 'true' generates a Reauthorize event in the authorization FSM. Reading this object always returns FALSE. This object is for testing purposes only and therefore it does not require to be associated with a last reset object.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.2.1.9999.1.1.1.1.7
docsIetfBpi2CmAuthGraceTimeThe value of this object is the grace time for an authorization key in seconds. A CM is expected to start trying to get a new authorization key beginning AuthGraceTime seconds before the most recent authorization key actually expires.ro
Integer32
.1.3.6.1.2.1.9999.1.1.1.1.8
docsIetfBpi2CmTEKGraceTimeThe value of this object is the grace time for the TEK in seconds. The CM is expected to start trying to acquire a new TEK beginning TEK GraceTime seconds before the expiration of the most recent TEK.ro
Integer32
.1.3.6.1.2.1.9999.1.1.1.1.9
docsIetfBpi2CmAuthWaitTimeoutThe value of this object is the Authorize Wait Timeout in second.ro
Integer32
.1.3.6.1.2.1.9999.1.1.1.1.10
docsIetfBpi2CmReauthWaitTimeoutThe value of this object is the Reauthorize Wait Timeout in seconds.ro
Integer32
.1.3.6.1.2.1.9999.1.1.1.1.11
docsIetfBpi2CmOpWaitTimeoutThe value of this object is the Operational Wait Timeout in seconds.ro
Integer32
.1.3.6.1.2.1.9999.1.1.1.1.12
docsIetfBpi2CmRekeyWaitTimeoutThe value of this object is the Rekey Wait Timeout in seconds.ro
Integer32
.1.3.6.1.2.1.9999.1.1.1.1.13
docsIetfBpi2CmAuthRejectWaitTimeoutThe value of this object is the Authorization Reject Wait Timeout in seconds.ro
Integer32
.1.3.6.1.2.1.9999.1.1.1.1.14
docsIetfBpi2CmSAMapWaitTimeoutThe value of this object is the retransmission interval, in seconds, of SA Map Requests from the MAP Wait state.ro
Integer32
.1.3.6.1.2.1.9999.1.1.1.1.15
docsIetfBpi2CmSAMapMaxRetriesThe value of this object is the maximum number of Map Request retries allowed.ro
Integer32
.1.3.6.1.2.1.9999.1.1.1.1.16
docsIetfBpi2CmAuthentInfosThe value of this object is the count of times the CM has transmitted an Authentication Information message. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.ro
Counter32
.1.3.6.1.2.1.9999.1.1.1.1.17
docsIetfBpi2CmAuthRequestsThe value of this object is the count of times the CM has transmitted an Authorization Request message. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.ro
Counter32
.1.3.6.1.2.1.9999.1.1.1.1.18
docsIetfBpi2CmAuthRepliesThe value of this object is the count of times the CM has received an Authorization Reply message. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.ro
Counter32
.1.3.6.1.2.1.9999.1.1.1.1.19
docsIetfBpi2CmAuthRejectsThe value of this object is the count of times the CM has received an Authorization Reject message. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.ro
Counter32
.1.3.6.1.2.1.9999.1.1.1.1.20
docsIetfBpi2CmAuthInvalidsThe value of this object is the count of times the CM has received an Authorization Invalid message. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.ro
Counter32
.1.3.6.1.2.1.9999.1.1.1.1.21
docsIetfBpi2CmAuthRejectErrorCodeThe value of this object is the enumerated description of the Error-Code in most recent Authorization Reject message received by the CM. This has value unknown(2) if the last Error-Code value was 0, and none(1) if no Authorization Reject message has been received since reboot.ro
Enumeration
.1.3.6.1.2.1.9999.1.1.1.1.22
docsIetfBpi2CmAuthRejectErrorStringThe value of this object is the text string in most recent Authorization Reject message received by the CM. This is a zero length string if no Authorization Reject message has been received since reboot.ro
SnmpAdminString
.1.3.6.1.2.1.9999.1.1.1.1.23
docsIetfBpi2CmAuthInvalidErrorCodeThe value of this object is the enumerated description of the Error-Code in most recent Authorization Invalid message received by the CM. This has value unknown(2) if the last Error-Code value was 0, and none(1) if no Authorization Invalid message has been received since reboot.ro
Enumeration
.1.3.6.1.2.1.9999.1.1.1.1.24
docsIetfBpi2CmAuthInvalidErrorStringThe value of this object is the text string in most recent Authorization Invalid message received by the CM. This is a zero length string if no Authorization Invalid message has been received since reboot.ro
SnmpAdminString
.1.3.6.1.2.1.9999.1.1.1.1.25
docsIetfBpi2CmTEKTableThis table describes the attributes of each CM Traffic Encryption Key (TEK) association. The CM maintains (no more than) one TEK association per SAID per CM MAC interface.
SEQUENCE OF DocsBpi2CmTEKEntry
.1.3.6.1.2.1.9999.1.1.2
docsIetfBpi2CmTEKEntryEach entry contains objects describing the TEK association attributes of one SAID. The CM MUST create one entry per SAID, regardless of whether the SAID was obtained from a Registration Response message, from an Authorization Reply message, or from any dynamic SAID establishment mechanisms.
DocsBpi2CmTEKEntry
.1.3.6.1.2.1.9999.1.1.2.1
docsIetfBpi2CmTEKSAIdThe value of this object is the DOCSIS Security Association ID (SAID).
DocsSAId
.1.3.6.1.2.1.9999.1.1.2.1.1
docsIetfBpi2CmTEKSATypeThe value of this object is the type of security association.ro
DocsBpkmSAType
.1.3.6.1.2.1.9999.1.1.2.1.2
docsIetfBpi2CmTEKDataEncryptAlgThe value of this object is the data encryption algorithm for this SAID.ro
DocsBpkmDataEncryptAlg
.1.3.6.1.2.1.9999.1.1.2.1.3
docsIetfBpi2CmTEKDataAuthentAlgThe value of this object is the data authentication algorithm for this SAID.ro
DocsBpkmDataAuthentAlg
.1.3.6.1.2.1.9999.1.1.2.1.4
docsIetfBpi2CmTEKStateThe value of this object is the state of the indicated TEK FSM. The start(1) state indicates that FSM is in its initial state.ro
Enumeration
.1.3.6.1.2.1.9999.1.1.2.1.5
docsIetfBpi2CmTEKKeySequenceNumberThe value of this object is the most recent TEK key sequence number for this TEK FSM.ro
Integer32
.1.3.6.1.2.1.9999.1.1.2.1.6
docsIetfBpi2CmTEKExpiresOldThe value of this object is the actual clock time for expiration of the immediate predecessor of the most recent TEK for this FSM. If this FSM has only one TEK, then the value is the time of activation of this FSM.ro
DateAndTime (SNMPv2-TC)
.1.3.6.1.2.1.9999.1.1.2.1.7
docsIetfBpi2CmTEKExpiresNewThe value of this object is the actual clock time for expiration of the most recent TEK for this FSM.ro
DateAndTime (SNMPv2-TC)
.1.3.6.1.2.1.9999.1.1.2.1.8
docsIetfBpi2CmTEKKeyRequestsThe value of this object is the count of times the CM has transmitted a Key Request message. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.ro
Counter32
.1.3.6.1.2.1.9999.1.1.2.1.9
docsIetfBpi2CmTEKKeyRepliesThe value of this object is the count of times the CM has received a Key Reply message, including a message whose authentication failed. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.ro
Counter32
.1.3.6.1.2.1.9999.1.1.2.1.10
docsIetfBpi2CmTEKKeyRejectsThe value of this object is the count of times the CM has received a Key Reject message, including a message whose authentication failed. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.ro
Counter32
.1.3.6.1.2.1.9999.1.1.2.1.11
docsIetfBpi2CmTEKInvalidsThe value of this object is the count of times the CM has received a TEK Invalid message, including a message whose authentication failed. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.ro
Counter32
.1.3.6.1.2.1.9999.1.1.2.1.12
docsIetfBpi2CmTEKAuthPendsThe value of this object is the count of times an Authorization Pending (Auth Pend) event occurred in this FSM. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.ro
Counter32
.1.3.6.1.2.1.9999.1.1.2.1.13
docsIetfBpi2CmTEKKeyRejectErrorCodeThe value of this object is the enumerated description of the Error-Code in most recent Key Reject message received by the CM. This has value unknown(2) if the last Error-Code value was 0, and none(1) if no Key Reject message has been received since registration.ro
Enumeration
.1.3.6.1.2.1.9999.1.1.2.1.14
docsIetfBpi2CmTEKKeyRejectErrorStringThe value of this object is the text string in most recent Key Reject message received by the CM. This is a zero length string if no Key Reject message has been received since registration.ro
SnmpAdminString
.1.3.6.1.2.1.9999.1.1.2.1.15
docsIetfBpi2CmTEKInvalidErrorCodeThe value of this object is the enumerated description of the Error-Code in most recent TEK Invalid message received by the CM. This has value unknown(2) if the last Error-Code value was 0, and none(1) if no TEK Invalid message has been received since registration.ro
Enumeration
.1.3.6.1.2.1.9999.1.1.2.1.16
docsIetfBpi2CmTEKInvalidErrorStringThe value of this object is the text string in most recent TEK Invalid message received by the CM. This is a zero length string if no TEK Invalid message has been received since registration.ro
SnmpAdminString
.1.3.6.1.2.1.9999.1.1.2.1.17
docsIetfBpi2CmMulticastObjects
OBJECT IDENTIFIER
.1.3.6.1.2.1.9999.1.1.3
docsIetfBpi2CmIpMulticastMapTableThis table maps multicast IP addresses to SAIDs per CM MAC Interface. It is intended to map multicast IP addresses associated with SA MAP Request messages.
SEQUENCE OF DocsBpi2CmIpMulticastMapEntry
.1.3.6.1.2.1.9999.1.1.3.1
docsIetfBpi2CmIpMulticastMapEntryEach entry contains objects describing the mapping of one multicast IP address to one SAID, as well as associated state, message counters, and error information. An entry may be removed from this table upon the reception of an SA Map Reject.
DocsBpi2CmIpMulticastMapEntry
.1.3.6.1.2.1.9999.1.1.3.1.1
docsIetfBpi2CmIpMulticastIndexThe index of this row.
Unsigned32
.1.3.6.1.2.1.9999.1.1.3.1.1.1
docsIetfBpi2CmIpMulticastAddressTypeThe type of internet address for docsIetfBpi2CmIpMulticastAddress.ro
InetAddressType (INET-ADDRESS-MIB)
.1.3.6.1.2.1.9999.1.1.3.1.1.2
docsIetfBpi2CmIpMulticastAddressThis object represents the IP multicast address to be mapped. The type of this address is determined by the value of the docsIetfBpi2CmIpMulticastAddressType object.ro
InetAddress (INET-ADDRESS-MIB)
.1.3.6.1.2.1.9999.1.1.3.1.1.3
docsIetfBpi2CmIpMulticastSAIdThis object represents the SAID to which the IP multicast address has been mapped. If no SA Map Reply has been received for the IP address, this object should have the value 0.ro
DocsSAIdOrZero
.1.3.6.1.2.1.9999.1.1.3.1.1.4
docsIetfBpi2CmIpMulticastSAMapStateThe value of this object is the state of the SA Mapping FSM for this IP.ro
Enumeration
.1.3.6.1.2.1.9999.1.1.3.1.1.5
docsIetfBpi2CmIpMulticastSAMapRequestsThe value of this object is the count of times the CM has transmitted an SA Map Request message for this IP. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.ro
Counter32
.1.3.6.1.2.1.9999.1.1.3.1.1.6
docsIetfBpi2CmIpMulticastSAMapRepliesThe value of this object is the count of times the CM has received an SA Map Reply message for this IP. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.ro
Counter32
.1.3.6.1.2.1.9999.1.1.3.1.1.7
docsIetfBpi2CmIpMulticastSAMapRejectsThe value of this object is the count of times the CM has received an SA MAP Reject message for this IP. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.ro
Counter32
.1.3.6.1.2.1.9999.1.1.3.1.1.8
docsIetfBpi2CmIpMulticastSAMapRejectErrorCodeThe value of this object is the enumerated description of the Error-Code in the most recent SA Map Reject message sent in response to an SA Map Request for This IP. It has the value none(1) if no SA MAP Reject message has been received since entry creation.ro
Enumeration
.1.3.6.1.2.1.9999.1.1.3.1.1.9
docsIetfBpi2CmIpMulticastSAMapRejectErrorStringThe value of this object is the text string in the most recent SA Map Reject message sent in response to an SA Map Request for this IP. It is a zero length string if no SA Map Reject message has been received since entry creation.ro
SnmpAdminString
.1.3.6.1.2.1.9999.1.1.3.1.1.10
docsIetfBpi2CmCertObjects
OBJECT IDENTIFIER
.1.3.6.1.2.1.9999.1.1.4
docsIetfBpi2CmDeviceCertTableThis table describes the Baseline Privacy Plus device certificates for each CM MAC interface.
SEQUENCE OF DocsBpi2CmDeviceCertEntry
.1.3.6.1.2.1.9999.1.1.4.1
docsIetfBpi2CmDeviceCertEntryEach entry contains the device certificates of one CM MAC interface. An entry in this table exists for each ifEntry with an ifType of docsCableMaclayer(127).
DocsBpi2CmDeviceCertEntry
.1.3.6.1.2.1.9999.1.1.4.1.1
docsIetfBpi2CmDeviceCmCertThe X509 DER-encoded cable modem certificate. Note: This object can be set only when the value is the zero-length OCTET STRING, otherwise an error 'inconsistentValue' is returned. Once the object contains the certificate, its access MUST be read-only and persists after re-initialization of the managed system.rw
DocsX509ASN1DEREncodedCertificate
.1.3.6.1.2.1.9999.1.1.4.1.1.1
docsIetfBpi2CmDeviceManufCertThe X509 DER-encoded manufacturer certificate which signed the cable modem certificate.ro
DocsX509ASN1DEREncodedCertificate
.1.3.6.1.2.1.9999.1.1.4.1.1.2
docsIetfBpi2CmCryptoSuiteTableThis table describes the Baseline Privacy Plus cryptographic suite capabilities for each CM MAC interface.
SEQUENCE OF DocsBpi2CmCryptoSuiteEntry
.1.3.6.1.2.1.9999.1.1.5
docsIetfBpi2CmCryptoSuiteEntryEach entry contains a cryptographic suite pair which this CM MAC supports.
DocsBpi2CmCryptoSuiteEntry
.1.3.6.1.2.1.9999.1.1.5.1
docsIetfBpi2CmCryptoSuiteIndexThe index for a cryptographic suite row.
Unsigned32
.1.3.6.1.2.1.9999.1.1.5.1.1
docsIetfBpi2CmCryptoSuiteDataEncryptAlgThe value of this object is the data encryption algorithm for this cryptographic suite capability.ro
DocsBpkmDataEncryptAlg
.1.3.6.1.2.1.9999.1.1.5.1.2
docsIetfBpi2CmCryptoSuiteDataAuthentAlgThe value of this object is the data authentication algorithm for this cryptographic suite capability.ro
DocsBpkmDataAuthentAlg
.1.3.6.1.2.1.9999.1.1.5.1.3
docsIetfBpi2CmtsObjects
OBJECT IDENTIFIER
.1.3.6.1.2.1.9999.1.2
docsIetfBpi2CmtsBaseTableThis table describes the basic Baseline Privacy attributes of each CMTS MAC interface.
SEQUENCE OF DocsBpi2CmtsBaseEntry
.1.3.6.1.2.1.9999.1.2.1
docsIetfBpi2CmtsBaseEntryEach entry contains objects describing attributes of one CMTS MAC interface. An entry in this table exists for each ifEntry with an ifType of docsCableMaclayer(127).
DocsBpi2CmtsBaseEntry
.1.3.6.1.2.1.9999.1.2.1.1
docsIetfBpi2CmtsDefaultAuthLifetimeThe value of this object is the default lifetime, in seconds, the CMTS assigns to a new authorization key. This object value persist after re-initialization of the managed system.rw
Integer32
.1.3.6.1.2.1.9999.1.2.1.1.1
docsIetfBpi2CmtsDefaultTEKLifetimeThe value of this object is the default lifetime, in seconds, the CMTS assigns to a new Traffic Encryption Key (TEK). This object value persist after re-initialization of the managed system.rw
Integer32
.1.3.6.1.2.1.9999.1.2.1.1.2
docsIetfBpi2CmtsDefaultSelfSignedManufCertTrustThis object determines the default trust of self-signed manufacturer certificate entries, contained in docsIetfBpi2CmtsCACertTable, created after setting this object. This object needs not to persist after re-initialization of the managed system.rw
Enumeration
.1.3.6.1.2.1.9999.1.2.1.1.3
docsIetfBpi2CmtsCheckCertValidityPeriodsSetting this object to 'true' causes all chained and root certificates in the chain to have their validity periods checked against the current time of day, when the CMTS receives an Authorization Request from the CM. A 'false' setting causes all certificates in the chain not to have their validity periods checked against the current time of day. This object needs not to persist after re-initialization of the managed system.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.2.1.9999.1.2.1.1.4
docsIetfBpi2CmtsAuthentInfosThe value of this object is the count of times the CMTS has received an Authentication Information message from any CM. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.ro
Counter32
.1.3.6.1.2.1.9999.1.2.1.1.5
docsIetfBpi2CmtsAuthRequestsThe value of this object is the count of times the CMTS has received an Authorization Request message from any CM. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.ro
Counter32
.1.3.6.1.2.1.9999.1.2.1.1.6
docsIetfBpi2CmtsAuthRepliesThe value of this object is the count of times the CMTS has transmitted an Authorization Reply message to any CM. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.ro
Counter32
.1.3.6.1.2.1.9999.1.2.1.1.7
docsIetfBpi2CmtsAuthRejectsThe value of this object is the count of times the CMTS has transmitted an Authorization Reject message to any CM. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.ro
Counter32
.1.3.6.1.2.1.9999.1.2.1.1.8
docsIetfBpi2CmtsAuthInvalidsThe value of this object is the count of times the CMTS has transmitted an Authorization Invalid message to any CM. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.ro
Counter32
.1.3.6.1.2.1.9999.1.2.1.1.9
docsIetfBpi2CmtsSAMapRequestsThe value of this object is the count of times the CMTS has received an SA Map Request message from any CM. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.ro
Counter32
.1.3.6.1.2.1.9999.1.2.1.1.10
docsIetfBpi2CmtsSAMapRepliesThe value of this object is the count of times the CMTS has transmitted an SA Map Reply message to any CM. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.ro
Counter32
.1.3.6.1.2.1.9999.1.2.1.1.11
docsIetfBpi2CmtsSAMapRejectsThe value of this object is the count of times the CMTS has transmitted an SA Map Reject message to any CM. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.ro
Counter32
.1.3.6.1.2.1.9999.1.2.1.1.12
docsIetfBpi2CmtsAuthTableThis table describes the attributes of each CM authorization association. The CMTS maintains one authorization association with each Baseline Privacy- enabled CM, registered on each CMTS MAC interface, regardless of whether the CM is authorized or rejected.
SEQUENCE OF DocsBpi2CmtsAuthEntry
.1.3.6.1.2.1.9999.1.2.2
docsIetfBpi2CmtsAuthEntryEach entry contains objects describing attributes of one authorization association. The CMTS MUST create one entry per CM per MAC interface, based on the receipt of an Authorization Request message, and MUST not delete the entry until the CM loses registration.
DocsBpi2CmtsAuthEntry
.1.3.6.1.2.1.9999.1.2.2.1
docsIetfBpi2CmtsAuthCmMacAddressThe value of this object is the physical address of the CM to which the authorization association applies.
MacAddress (SNMPv2-TC)
.1.3.6.1.2.1.9999.1.2.2.1.1
docsIetfBpi2CmtsAuthCmBpiVersionThe value of this object is the version of Baseline Privacy for which this CM has registered. The value 'bpiplus' represents the value of BPI-Version Attribute of the Baseline Privacy Key Management BPKM attribute BPI-Version (1). The value 'bpi' is used to represent the CM registered using DOCSIS 1.0 Baseline Privacy.ro
Enumeration
.1.3.6.1.2.1.9999.1.2.2.1.2
docsIetfBpi2CmtsAuthCmPublicKeyThe value of this object is a DER-encoded RSAPublicKey ASN.1 type string, as defined in the RSA Encryption Standard (PKCS #1), corresponding to the public key of the CM. This is the zero-length OCTET STRING if the CMTS does not retain the public key.ro
OCTET STRING
.1.3.6.1.2.1.9999.1.2.2.1.3
docsIetfBpi2CmtsAuthCmKeySequenceNumberThe value of this object is the most recent authorization key sequence number for this CM.ro
Integer32
.1.3.6.1.2.1.9999.1.2.2.1.4
docsIetfBpi2CmtsAuthCmExpiresOldThe value of this object is the actual clock time for expiration of the immediate predecessor of the most recent authorization key for this FSM. If this FSM has only one authorization key, then the value is the time of activation of this FSM. Note: This object has no meaning for CMs running in BPI mode, therefore this object is not instantiated for entries associated to those CMs.ro
DateAndTime (SNMPv2-TC)
.1.3.6.1.2.1.9999.1.2.2.1.5
docsIetfBpi2CmtsAuthCmExpiresNewThe value of this object is the actual clock time for expiration of the most recent authorization key for this FSM.ro
DateAndTime (SNMPv2-TC)
.1.3.6.1.2.1.9999.1.2.2.1.6
docsIetfBpi2CmtsAuthCmLifetimeThe value of this object is the lifetime, in seconds, the CMTS assigns to an authorization key for this CM.rw
Integer32
.1.3.6.1.2.1.9999.1.2.2.1.7
docsIetfBpi2CmtsAuthCmResetSetting this object to invalidateAuth(2) causes the CMTS to invalidate the current CM authorization key(s), but not to transmit an Authorization Invalid message nor to invalidate the primary SAID's TEKs. Setting this object to sendAuthInvalid(3) causes the CMTS to invalidate the current CM authorization key(s), and to transmit an Authorization Invalid message to the CM, but not to invalidate the primary SAID's TEKs. Setting this object to invalidateTeks(4) causes the CMTS to invalidate the current CM authorization key(s), to transmit an Authorization Invalid message to the CM, and to invalidate the TEKs associated with this CM's primary SAID. For BPI mode, substitute all of the CM's unicast TEK(s) for the primary SAID's TEKs in the previous paragraph. Reading this object returns the most recently set value of this object, or returns noResetRequested(1) if the object has not been set since entry creation.rw
Enumeration
.1.3.6.1.2.1.9999.1.2.2.1.8
docsIetfBpi2CmtsAuthCmInfosThe value of this object is the count of times the CMTS has received an Authentication Information message from this CM. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.ro
Counter32
.1.3.6.1.2.1.9999.1.2.2.1.9
docsIetfBpi2CmtsAuthCmRequestsThe value of this object is the count of times the CMTS has received an Authorization Request message from this CM. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.ro
Counter32
.1.3.6.1.2.1.9999.1.2.2.1.10
docsIetfBpi2CmtsAuthCmRepliesThe value of this object is the count of times the CMTS has transmitted an Authorization Reply message to this CM. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.ro
Counter32
.1.3.6.1.2.1.9999.1.2.2.1.11
docsIetfBpi2CmtsAuthCmRejectsThe value of this object is the count of times the CMTS has transmitted an Authorization Reject message to this CM. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.ro
Counter32
.1.3.6.1.2.1.9999.1.2.2.1.12
docsIetfBpi2CmtsAuthCmInvalidsThe value of this object is the count of times the CMTS has transmitted an Authorization Invalid message to this CM. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.ro
Counter32
.1.3.6.1.2.1.9999.1.2.2.1.13
docsIetfBpi2CmtsAuthRejectErrorCodeThe value of this object is the enumerated description of the Error-Code in most recent Authorization Reject message transmitted to the CM. This has value unknown(2) if the last Error-Code value was 0, and none(1) if no Authorization Reject message has been transmitted to the CM, since entry creation.ro
Enumeration
.1.3.6.1.2.1.9999.1.2.2.1.14
docsIetfBpi2CmtsAuthRejectErrorStringThe value of this object is the text string in most recent Authorization Reject message transmitted to the CM. This is a zero length string if no Authorization Reject message has been transmitted to the CM, since entry creation.ro
SnmpAdminString
.1.3.6.1.2.1.9999.1.2.2.1.15
docsIetfBpi2CmtsAuthInvalidErrorCodeThe value of this object is the enumerated description of the Error-Code in most recent Authorization Invalid message transmitted to the CM. This has value unknown(2) if the last Error-Code value was 0, and none(1) if no Authorization Invalid message has been transmitted to the CM since entry creation.ro
Enumeration
.1.3.6.1.2.1.9999.1.2.2.1.16
docsIetfBpi2CmtsAuthInvalidErrorStringThe value of this object is the text string in most recent Authorization Invalid message transmitted to the CM. This is a zero length string if no Authorization Invalid message has been transmitted to the CM since entry creation.ro
SnmpAdminString
.1.3.6.1.2.1.9999.1.2.2.1.17
docsIetfBpi2CmtsAuthPrimarySAIdThe value of this object is the Primary Security Association identifier. For BPI mode, the value must be any unicast SID.ro
DocsSAIdOrZero
.1.3.6.1.2.1.9999.1.2.2.1.18
docsIetfBpi2CmtsAuthBpkmCmCertValidContains the reason why a CM's certificate is deemed valid or invalid. Return unknown(0) if the CM is running BPI mode. ValidCmChained(1) means the certificate is valid because it chains to a valid certificate. ValidCmTrusted(2) means the certificate is valid because it has been provisioned (in the docsIetfBpi2CmtsProvisionedCmCert table) to be trusted. InvalidCmUntrusted(3) means the certificate is invalid because it has been provisioned (in the docsIetfBpi2CmtsProvisionedCmCert table) to be untrusted. InvalidCAUntrusted(4) means the certificate is invalid because it chains to an untrusted certificate. InvalidCmOther(5) and InvalidCAOther(6) refer to errors in parsing, validity periods, etc, which are attributable to the CM certificate or its chain respectively; additional information may be found in docsIetfBpi2AuthRejectErrorString for these types of errors. InvalidCmRevoked(7) means the certificate is invalid as it was marked as revoked. InvalidCARevoked(8) means the CA certificate is invalid as it was marked as revoked.ro
Enumeration
.1.3.6.1.2.1.9999.1.2.2.1.19
docsIetfBpi2CmtsAuthBpkmCmCertThe X509 CM Certificate sent as part of a BPKM Authorization Request. Note: The zero-length OCTET STRING must be returned if the Entire certificate is not retained in the CMTS.ro
DocsX509ASN1DEREncodedCertificate
.1.3.6.1.2.1.9999.1.2.2.1.20
docsIetfBpi2CmtsAuthCACertIndexPtrA row index into docsIetfBpi2CmtsCACertTable. Returns the index in docsIetfBpi2CmtsCACertTable which CA certificate this CM is chained to. A value of 0 means it could not be found or not applicable.ro
Unsigned32
.1.3.6.1.2.1.9999.1.2.2.1.21
docsIetfBpi2CmtsTEKTableThis table describes the attributes of each Traffic Encryption Key (TEK) association. The CMTS Maintains one TEK association per SAID on each CMTS MAC interface.
SEQUENCE OF DocsBpi2CmtsTEKEntry
.1.3.6.1.2.1.9999.1.2.3
docsIetfBpi2CmtsTEKEntryEach entry contains objects describing attributes of one TEK association on a particular CMTS MAC interface. The CMTS MUST create one entry per SAID per MAC interface, based on the receipt of a Key Request message, and MUST not delete the entry before the CM authorization for the SAID permanently expires.
DocsBpi2CmtsTEKEntry
.1.3.6.1.2.1.9999.1.2.3.1
docsIetfBpi2CmtsTEKSAIdThe value of this object is the DOCSIS Security Association ID (SAID).
DocsSAId
.1.3.6.1.2.1.9999.1.2.3.1.1
docsIetfBpi2CmtsTEKSATypeThe value of this object is the type of security association. 'dynamic' does not apply to CMs running in BPI mode. Unicast BPI TEKs must utilize the 'primary' encoding and multicast BPI TEKs must utilize the 'static' encoding.ro
DocsBpkmSAType
.1.3.6.1.2.1.9999.1.2.3.1.2
docsIetfBpi2CmtsTEKDataEncryptAlgThe value of this object is the data encryption algorithm for this SAID.ro
DocsBpkmDataEncryptAlg
.1.3.6.1.2.1.9999.1.2.3.1.3
docsIetfBpi2CmtsTEKDataAuthentAlgThe value of this object is the data authentication algorithm for this SAID.ro
DocsBpkmDataAuthentAlg
.1.3.6.1.2.1.9999.1.2.3.1.4
docsIetfBpi2CmtsTEKLifetimeThe value of this object is the lifetime, in seconds, the CMTS assigns to keys for this TEK association.rw
Integer32
.1.3.6.1.2.1.9999.1.2.3.1.5
docsIetfBpi2CmtsTEKKeySequenceNumberThe value of this object is the most recent TEK key sequence number for this SAID.ro
Integer32
.1.3.6.1.2.1.9999.1.2.3.1.6
docsIetfBpi2CmtsTEKExpiresOldThe value of this object is the actual clock time for expiration of the immediate predecessor of the most recent TEK for this FSM. If this FSM has only one TEK, then the value is the time of activation of this FSM.ro
DateAndTime (SNMPv2-TC)
.1.3.6.1.2.1.9999.1.2.3.1.7
docsIetfBpi2CmtsTEKExpiresNewThe value of this object is the actual clock time for expiration of the most recent TEK for this FSM.ro
DateAndTime (SNMPv2-TC)
.1.3.6.1.2.1.9999.1.2.3.1.8
docsIetfBpi2CmtsTEKResetSetting this object to 'true' causes the CMTS to invalidate all currently active TEK(s) and to generate new TEK(s) for the associated SAID; the CMTS MAY also generate unsolicited TEK Invalid message(s), to optimize the TEK synchronization between the CMTS and the CM(s). Reading this object always returns FALSE.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.2.1.9999.1.2.3.1.9
docsIetfBpi2CmtsKeyRequestsThe value of this object is the count of times the CMTS has received a Key Request message. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.ro
Counter32
.1.3.6.1.2.1.9999.1.2.3.1.10
docsIetfBpi2CmtsKeyRepliesThe value of this object is the count of times the CMTS has transmitted a Key Reply message. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.ro
Counter32
.1.3.6.1.2.1.9999.1.2.3.1.11
docsIetfBpi2CmtsKeyRejectsThe value of this object is the count of times the CMTS has transmitted a Key Reject message. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.ro
Counter32
.1.3.6.1.2.1.9999.1.2.3.1.12
docsIetfBpi2CmtsTEKInvalidsThe value of this object is the count of times the CMTS has transmitted a TEK Invalid message. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.ro
Counter32
.1.3.6.1.2.1.9999.1.2.3.1.13
docsIetfBpi2CmtsKeyRejectErrorCodeThe value of this object is the enumerated description of the Error-Code in the most recent Key Reject message sent in response to a Key Request for this SAID. This has value unknown(2) if the last Error-Code value was 0, and none(1) if no Key Reject message has been received since registration.ro
Enumeration
.1.3.6.1.2.1.9999.1.2.3.1.14
docsIetfBpi2CmtsKeyRejectErrorStringThe value of this object is the text string in the most recent Key Reject message sent in response to a Key Request for this SAID. This is a zero length string if no Key Reject message has been received since registration.ro
SnmpAdminString
.1.3.6.1.2.1.9999.1.2.3.1.15
docsIetfBpi2CmtsTEKInvalidErrorCodeThe value of this object is the enumerated description of the Error-Code in the most recent TEK Invalid message sent in association with this SAID. This has value unknown(2) if the last Error-Code value was 0, and none(1) if no TEK Invalid message has been received since registration.ro
Enumeration
.1.3.6.1.2.1.9999.1.2.3.1.16
docsIetfBpi2CmtsTEKInvalidErrorStringThe value of this object is the text string in the most recent TEK Invalid message sent in association with this SAID. This is a zero length string if no TEK Invalid message has been received since registration.ro
SnmpAdminString
.1.3.6.1.2.1.9999.1.2.3.1.17
docsIetfBpi2CmtsMulticastObjects
OBJECT IDENTIFIER
.1.3.6.1.2.1.9999.1.2.4
docsIetfBpi2CmtsIpMulticastMapTableThis table maps multicast IP addresses to SAIDs. If a multicast IP address is mapped by multiple rows in the table, the row with the lowest docsIetfBpi2CmtsIpMulticastIndex must be utilized for the mapping.
SEQUENCE OF DocsBpi2CmtsIpMulticastMapEntry
.1.3.6.1.2.1.9999.1.2.4.1
docsIetfBpi2CmtsIpMulticastMapEntryEach entry contains objects describing the mapping of a set of multicast IP address and mask to one SAID associated to a CMTS MAC Interface, as well as associated message counters and error information.
DocsBpi2CmtsIpMulticastMapEntry
.1.3.6.1.2.1.9999.1.2.4.1.1
docsIetfBpi2CmtsIpMulticastIndexThe index of this row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.
Unsigned32
.1.3.6.1.2.1.9999.1.2.4.1.1.1
docsIetfBpi2CmtsIpMulticastAddressTypeThe type of internet address for docsIetfBpi2CmtsIpMulticastAddress and docsIetfBpi2CmtsIpMulticastMask.rw
InetAddressType (INET-ADDRESS-MIB)
.1.3.6.1.2.1.9999.1.2.4.1.1.2
docsIetfBpi2CmtsIpMulticastAddressThis object represents the IP multicast address to be mapped, in conjunction with docsIetfBpi2CmtsIpMulticastMask. The type of this address is determined by the value of the object docsIetfBpi2CmtsIpMulticastAddressType.rw
InetAddress (INET-ADDRESS-MIB)
.1.3.6.1.2.1.9999.1.2.4.1.1.3
docsIetfBpi2CmtsIpMulticastMaskThis object represents the IP multicast address mask for this row. An IP multicast address matches this row if the logical AND of the address with docsIetfBpi2CmtsIpMulticastMask is identical to the logical AND of docsIetfBpi2CmtsIpMulticastAddr with docsIetfBpi2CmtsIpMulticastMask. The type of this address is determined by the value of the object docsIetfBpi2CmtsIpMulticastAddressType. Note: For IPv6 this object needs not to represent a contiguous netmask, e.g. to associate an SAID to a multicast group matching 'any' multicast scope. The TC InetAddressPrefixLength is not used because it only represents contiguous netmask.rw
InetAddress (INET-ADDRESS-MIB)
.1.3.6.1.2.1.9999.1.2.4.1.1.4
docsIetfBpi2CmtsIpMulticastSAIdThis object represents the multicast SAID to be used in this IP multicast address mapping entry.rw
DocsSAIdOrZero
.1.3.6.1.2.1.9999.1.2.4.1.1.5
docsIetfBpi2CmtsIpMulticastSATypeThe value of this object is the type of security association. 'dynamic' does not apply to CMs running in BPI mode. Unicast BPI TEKs must utilize the 'primary' encoding and multicast BPI TEKs must utilize the 'static' encoding. SNMP created entries set this object by default to 'static' if not set at row creation.rw
DocsBpkmSAType
.1.3.6.1.2.1.9999.1.2.4.1.1.6
docsIetfBpi2CmtsIpMulticastDataEncryptAlgThe value of this object is the data encryption algorithm for this IP.rw
DocsBpkmDataEncryptAlg
.1.3.6.1.2.1.9999.1.2.4.1.1.7
docsIetfBpi2CmtsIpMulticastDataAuthentAlgThe value of this object is the data authentication algorithm for this IP.rw
DocsBpkmDataAuthentAlg
.1.3.6.1.2.1.9999.1.2.4.1.1.8
docsIetfBpi2CmtsIpMulticastSAMapRequestsThe value of this object is the count of times the CMTS has received an SA Map Request message for this IP. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.ro
Counter32
.1.3.6.1.2.1.9999.1.2.4.1.1.9
docsIetfBpi2CmtsIpMulticastSAMapRepliesThe value of this object is the count of times the CMTS has transmitted an SA Map Reply message for this IP. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.ro
Counter32
.1.3.6.1.2.1.9999.1.2.4.1.1.10
docsIetfBpi2CmtsIpMulticastSAMapRejectsThe value of this object is the count of times the CMTS has transmitted an SA Map Reject message for this IP. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.ro
Counter32
.1.3.6.1.2.1.9999.1.2.4.1.1.11
docsIetfBpi2CmtsIpMulticastSAMapRejectErrorCodeThe value of this object is the enumerated description of the Error-Code in the most recent SA Map Reject message sent in response to a SA Map Request for This IP. It has value unknown(2) if the last Error-Code Value was 0, and none(1) if no SA MAP Reject message has been received since entry creation.ro
Enumeration
.1.3.6.1.2.1.9999.1.2.4.1.1.12
docsIetfBpi2CmtsIpMulticastSAMapRejectErrorStringThe value of this object is the text string in the most recent SA Map Reject message sent in response to an SA Map Request for this IP. It is a zero length string if no SA Map Reject message has been received since entry creation.ro
SnmpAdminString
.1.3.6.1.2.1.9999.1.2.4.1.1.13
docsIetfBpi2CmtsIpMulticastMapControlThis object controls and reflects the IP multicast address mapping entry. There is no restriction on the ability to change values in this row while the row is active. A created row can be set to active only after the Corresponding instances of docsIetfBpi2CmtsIpMulticastAddress, docsIetfBpi2CmtsIpMulticastMask, docsIetfBpi2CmtsIpMulticastSAId and docsIetfBpi2CmtsIpMulticastSAType have all been set.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.2.1.9999.1.2.4.1.1.14
docsIetfBpi2CmtsIpMulticastMapStorageTypeThe storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.ro
StorageType (SNMPv2-TC)
.1.3.6.1.2.1.9999.1.2.4.1.1.15
docsIetfBpi2CmtsMulticastAuthTableThis table describes the multicast SAID authorization for each CM on each CMTS MAC interface.
SEQUENCE OF DocsBpi2CmtsMulticastAuthEntry
.1.3.6.1.2.1.9999.1.2.4.2
docsIetfBpi2CmtsMulticastAuthEntryEach entry contains objects describing the key authorization of one cable modem for one multicast SAID for one CMTS MAC interface. Row entries persist after re-initialization of the managed system.
DocsBpi2CmtsMulticastAuthEntry
.1.3.6.1.2.1.9999.1.2.4.2.1
docsIetfBpi2CmtsMulticastAuthSAIdThis object represents the multicast SAID for authorization.
DocsSAId
.1.3.6.1.2.1.9999.1.2.4.2.1.1
docsIetfBpi2CmtsMulticastAuthCmMacAddressThis object represents the MAC address of the CM to which the multicast SAID authorization applies.
MacAddress (SNMPv2-TC)
.1.3.6.1.2.1.9999.1.2.4.2.1.2
docsIetfBpi2CmtsMulticastAuthControlThe status of this conceptual row for the authorization of multicast SAIDs to CMs.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.2.1.9999.1.2.4.2.1.3
docsIetfBpi2CmtsCertObjects
OBJECT IDENTIFIER
.1.3.6.1.2.1.9999.1.2.5
docsIetfBpi2CmtsProvisionedCmCertTableA table of CM certificate trust entries provisioned to the CMTS. The trust object for a certificate in this table has an overriding effect on the validity object of a certificate in the authorization table, as long as the entire contents of the two certificates are identical.
SEQUENCE OF DocsBpi2CmtsProvisionedCmCertEntry
.1.3.6.1.2.1.9999.1.2.5.1
docsIetfBpi2CmtsProvisionedCmCertEntryAn entry in the CMTS's provisioned CM certificate table. Row entries persist after re-initialization of the managed system.
DocsBpi2CmtsProvisionedCmCertEntry
.1.3.6.1.2.1.9999.1.2.5.1.1
docsIetfBpi2CmtsProvisionedCmCertMacAddressThe index of this row.
MacAddress (SNMPv2-TC)
.1.3.6.1.2.1.9999.1.2.5.1.1.1
docsIetfBpi2CmtsProvisionedCmCertTrustTrust state for the provisioned CM certificate entry. Note: Setting this object need only override the validity of CM certificates sent in future authorization requests; instantaneous effect need not occur.rw
Enumeration
.1.3.6.1.2.1.9999.1.2.5.1.1.2
docsIetfBpi2CmtsProvisionedCmCertSourceThis object indicates how the certificate reached the CMTS. Other(4) means is originated from a source not identified above.ro
Enumeration
.1.3.6.1.2.1.9999.1.2.5.1.1.3
docsIetfBpi2CmtsProvisionedCmCertStatusThe status of this conceptual row. Values in this row cannot be changed while the row is 'active'.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.2.1.9999.1.2.5.1.1.4
docsIetfBpi2CmtsProvisionedCmCertAn X509 DER-encoded Certificate Authority certificate. Note: The zero-length OCTET STRING must be returned, on reads, if the entire certificate is not retained in the CMTS.rw
DocsX509ASN1DEREncodedCertificate
.1.3.6.1.2.1.9999.1.2.5.1.1.5
docsIetfBpi2CmtsCACertTableThe table of known Certificate Authority certificates acquired by this device.
SEQUENCE OF DocsBpi2CmtsCACertEntry
.1.3.6.1.2.1.9999.1.2.5.2
docsIetfBpi2CmtsCACertEntryA row in the Certificate Authority certificate table. Row entries with trust status 'trusted', 'untrusted', or 'root' persist after re-initialization of the managed system.
DocsBpi2CmtsCACertEntry
.1.3.6.1.2.1.9999.1.2.5.2.1
docsIetfBpi2CmtsCACertIndexThe index for this row.
Unsigned32 (1.. 4294967295)
.1.3.6.1.2.1.9999.1.2.5.2.1.1
docsIetfBpi2CmtsCACertSubjectThe subject name exactly as it is encoded in the X509 certificate. The organizationName portion of the certificate's subject name must be present. All other fields are optional. Any optional field present must be pre pended with <CR> (carriage return, U+000D) <LF> (line feed, U+000A). Ordering of fields present must conform to: organizationName <CR> <LF> countryName <CR> <LF> stateOrProvinceName <CR> <LF> localityName <CR> <LF> organizationalUnitName <CR> <LF> organizationalUnitName=<Manufacturing Location> <CR> <LF> commonNamero
SnmpAdminString (SNMP-FRAMEWORK-MIB)
.1.3.6.1.2.1.9999.1.2.5.2.1.2
docsIetfBpi2CmtsCACertIssuerThe issuer name exactly as it is encoded in the X509 certificate. The commonName portion of the certificate's issuer name must be present. All other fields are optional. Any optional field present must be pre pended with <CR> (carriage return, U+000D) <LF> (line feed, U+000A). Ordering of fields present must conform to: CommonName <CR><LF> countryName <CR><LF> stateOrProvinceName <CR><LF> localityName <CR><LF> organizationName <CR><LF> organizationalUnitName <CR><LF> organizationalUnitName=<Manufacturing Location>ro
SnmpAdminString (SNMP-FRAMEWORK-MIB)
.1.3.6.1.2.1.9999.1.2.5.2.1.3
docsIetfBpi2CmtsCACertSerialNumberThis CA certificate's serial number represented as an octet string.ro
OCTET STRING
.1.3.6.1.2.1.9999.1.2.5.2.1.4
docsIetfBpi2CmtsCACertTrustThis object controls the trust status of this certificate. Root certificates must be given root(4) trust; manufacturer certificates must not be given root(4) trust. Trust on root certificates must not change. Note: Setting this object need only affect the validity of CM certificates sent in future authorization requests; instantaneous effect need not occur.rw
Enumeration
.1.3.6.1.2.1.9999.1.2.5.2.1.5
docsIetfBpi2CmtsCACertSourceThis object indicates how the certificate reached the CMTS. Other(4) means it originated from a source not identified above.ro
Enumeration
.1.3.6.1.2.1.9999.1.2.5.2.1.6
docsIetfBpi2CmtsCACertStatusThe status of this conceptual row. An attempt to set writable columnar values while this row is active behaves as follows: - Sets to the object docsIetfBpi2CmtsCACertTrust are allowed. - Sets to the object docsIetfBpi2CmtsCACert will return an error inconsistentValue'. A newly create entry cannot be set to active until the value of docsIetfBpi2CmtsCACert is being set.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.2.1.9999.1.2.5.2.1.7
docsIetfBpi2CmtsCACertAn X509 DER-encoded Certificate Authority certificate. To help identify certificates, either this object or docsIetfBpi2CmtsCACertThumbprint must be returned by a CMTS for self-signed CA certificates. Note: The zero-length OCTET STRING must be returned, on reads, if the entire certificate is not retained in the CMTS.rw
DocsX509ASN1DEREncodedCertificate
.1.3.6.1.2.1.9999.1.2.5.2.1.8
docsIetfBpi2CmtsCACertThumbprintThe SHA-1 hash of a CA certificate. To help identify certificates, either this object or docsIetfBpi2CmtsCACert must be returned by a CMTS for self-signed CA certificates. Note: The zero-length OCTET STRING must be returned, on reads, if the CA certificate thumb print is not retained in the CMTS.ro
OCTET STRING
.1.3.6.1.2.1.9999.1.2.5.2.1.9
docsIetfBpi2CodeDownloadControl
OBJECT IDENTIFIER
.1.3.6.1.2.1.9999.1.4
docsIetfBpi2CodeDownloadStatusCodeThe value indicates the result of the latest config file CVC verification, SNMP CVC verification, or code file verification.ro
Enumeration
.1.3.6.1.2.1.9999.1.4.1
docsIetfBpi2CodeDownloadStatusStringThe value of this object indicates the additional information to the status code. The value will include the error code and error description which will be defined separately.ro
SnmpAdminString (SNMP-FRAMEWORK-MIB)
.1.3.6.1.2.1.9999.1.4.2
docsIetfBpi2CodeMfgOrgNameThe value of this object is the device manufacturer's organizationName.ro
SnmpAdminString (SNMP-FRAMEWORK-MIB)
.1.3.6.1.2.1.9999.1.4.3
docsIetfBpi2CodeMfgCodeAccessStartThe value of this object is the device manufacturer's current codeAccessStart value. This value always be referenced to Greenwich Mean Time (GMT) and the value format must contain TimeZone information (fields 8-10).ro
DateAndTime
.1.3.6.1.2.1.9999.1.4.4
docsIetfBpi2CodeMfgCvcAccessStartThe value of this object is the device manufacturer's current cvcAccessStart value. This value always be referenced to Greenwich Mean Time (GMT) and the value format must contain TimeZone information (fields 8-10).ro
DateAndTime
.1.3.6.1.2.1.9999.1.4.5
docsIetfBpi2CodeCoSignerOrgNameThe value of this object is the Co-Signer's organizationName. The value is a zero length string if the co-signer is not specified.ro
SnmpAdminString (SNMP-FRAMEWORK-MIB)
.1.3.6.1.2.1.9999.1.4.6
docsIetfBpi2CodeCoSignerCodeAccessStartThe value of this object is the Co-Signer's current codeAccessStart value. This value always be referenced to Greenwich Mean Time (GMT) and the value format must contain TimeZone information (fields 8-10). If docsIetfBpi2CodeCoSignerOrgName is a zero length string, the value of this object is meaningless.ro
DateAndTime
.1.3.6.1.2.1.9999.1.4.7
docsIetfBpi2CodeCoSignerCvcAccessStartThe value of this object is the Co-Signer's current cvcAccessStart value. This value always be referenced to Greenwich Mean Time (GMT) and the value format must contain TimeZone information (fields 8-10). If docsIetfBpi2CodeCoSignerOrgName is a zero length string, the value of this object is meaningless.ro
DateAndTime
.1.3.6.1.2.1.9999.1.4.8
docsIetfBpi2CodeCvcUpdateSetting a CVC to this object triggers the device to verify the CVC and update the cvcAccessStart values, then the content of this object is discarded.. If the device is not enabled to upgrade codefiles, or the CVC verification fails, the CVC will be rejected. Reading this object always returns the zero-length OCTET STRING.rw
DocsX509ASN1DEREncodedCertificate
.1.3.6.1.2.1.9999.1.4.9
docsIetfBpi2Conformance
OBJECT IDENTIFIER
.1.3.6.1.2.1.9999.2
docsIetfBpi2Compliances
OBJECT IDENTIFIER
.1.3.6.1.2.1.9999.2.1
docsIetfBpi2CmComplianceThis is the compliance statement for CMs which implement the DOCSIS Baseline Privacy Interface Plus.
Unknown
.1.3.6.1.2.1.9999.2.1.1
docsIetfBpi2CmtsComplianceThis is the compliance statement for CMTSs which implement the DOCSIS Baseline Privacy Interface Plus.
Unknown
.1.3.6.1.2.1.9999.2.1.2
docsIetfBpi2Groups
OBJECT IDENTIFIER
.1.3.6.1.2.1.9999.2.2
docsIetfBpi2CmGroupThis collection of objects provides CM BPI+ status and control.
Unknown
.1.3.6.1.2.1.9999.2.2.1
docsIetfBpi2CmtsGroupThis collection of objects provides CMTS BPI+ status and control.
Unknown
.1.3.6.1.2.1.9999.2.2.2
docsIetfBpi2CodeDownloadGroupThis collection of objects provide authenticated software download support.
Unknown
.1.3.6.1.2.1.9999.2.2.3
DOCS-IETF-BPI2-MIB - SNMP MIB Reference | MIBs Explorer