ARRIS-D5-VIDEO-MIB
AI MIB Summary
The ARRIS-D5-VIDEO-MIB provides SNMP management interfaces for monitoring and controlling MPEG video transport streams and associated software processes on Arris DOCSIS 3.0/3.1 Cable Modem Termination Systems (CMTS). It exposes operational metrics for video channel status, stream health, and MPEG protocol state transitions to ensure reliable multicast video delivery over the cable network.
This MIB manages the MPEG / VIDEO software on the Arris CMTS.
Main OID:
d5MpegVideoMIB.1.3.6.1.4.1.4115.1.8.1.1
370
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
370 total| Object Name |
|---|
d5MpegVideoMIBThis MIB manages the MPEG / VIDEO software on the Arris CMTS. MODULE-IDENTITY .1.3.6.1.4.1.4115.1.8.1.1 |
d5VideoObjects OBJECT IDENTIFIER .1.3.6.1.4.1.4115.1.8.1.1.1 |
d5VideoControlGroup OBJECT IDENTIFIER .1.3.6.1.4.1.4115.1.8.1.1.1.1 |
d5vControlPatIntervalRetransmission interval for PAT tables in milliseconds.rw Unsigned32 .1.3.6.1.4.1.4115.1.8.1.1.1.1.1 |
d5vControlPmtIntervalRetransmission interval for PMT tables in milliseconds.rw Unsigned32 .1.3.6.1.4.1.4115.1.8.1.1.1.1.2 |
d5vControlNitIntervalRetransmission interval for NIT tables in milliseconds.rw Unsigned32 .1.3.6.1.4.1.4115.1.8.1.1.1.1.3 |
d5vControlSdtIntervalRetransmission interval for SDT tables in milliseconds.rw Unsigned32 .1.3.6.1.4.1.4115.1.8.1.1.1.1.4 |
d5vControlOriginalNetworkIdDVB original-network-id to be used in downstream .rw Unsigned32 .1.3.6.1.4.1.4115.1.8.1.1.1.1.5 |
d5vControlNetworkIdDVB network-id to be used in downstream .rw Unsigned32 .1.3.6.1.4.1.4115.1.8.1.1.1.1.6 |
d5vControlNetworkNameDVB network-name to be used in downstream .rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.1.1.1.7 |
d5vControlTimeoutIntervalTimeout interval for incoming streams in milliseconds.rw Unsigned32 .1.3.6.1.4.1.4115.1.8.1.1.1.1.8 |
d5vControlNitPIDPID value to use when generating NIT tables.rw D5PID .1.3.6.1.4.1.4115.1.8.1.1.1.1.9 |
d5vControlAutoGeneratePATFlag specifying whether or not the auto-generation by the
D5 of PAT tables is enabledrw D5GeneratePat .1.3.6.1.4.1.4115.1.8.1.1.1.1.10 |
d5vControlAutoGenerateCATFlag specifying whether or not the auto-generation by the
D5 of CAT tables is enabledrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.1.1.1.11 |
d5vControlAutoGeneratePMTFlag specifying whether or not the auto-generation by the
D5 of PMT tables is enabledrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.1.1.1.12 |
d5vControlAutoGenerateNITFlag specifying whether or not the auto-generation by the
D5 of NIT tables is enabled(and the associated entry
in the PAT table for the NIT-PID)rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.1.1.1.13 |
d5vControlAutoGenerateSDTFlag specifying whether or not the auto-generation by the
D5 of SDT tables is enabledrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.1.1.1.14 |
d5vControlAutoGenerateTDTFlag specifying whether or not the auto-generation by the
D5 of TDT tables is enabledrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.1.1.1.15 |
d5vControlAutoGenerateTOTFlag specifying whether or not the auto-generation by the
D5 of TOT tables is enabledrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.1.1.1.16 |
d5vControlPassThroughTypeThis can be used to disable the default Arris prog/pid
remapping scheme, and use pass-through remapping instead.
Can also be used to enable MPTS-pass-through mode.rw Enumeration .1.3.6.1.4.1.4115.1.8.1.1.1.1.17 |
d5vControlCatIntervalRetransmission interval for CAT tables in milliseconds.rw Unsigned32 .1.3.6.1.4.1.4115.1.8.1.1.1.1.18 |
d5vControlMaxProgramsPerQamChannelMaximum number of programs allowed on a Qam channel at any
one time.(Some QAM H/W may restrict to 31)rw Unsigned32 .1.3.6.1.4.1.4115.1.8.1.1.1.1.19 |
d5vControlAllowEsDvbPidsFlag that determines whether or not DVB-reserved PIDS are
allowed to be used for elementary-streams.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.1.1.1.20 |
d5vControlDefaultMappingSchemeThe mapping scheme to be used for input transport-streams
that have no associated static-configuration.rw D5VideoDefaultMappingScheme .1.3.6.1.4.1.4115.1.8.1.1.1.1.21 |
d5vControlFastPsiTableUpdatesIf this is set to TRUE, then PSI table updates are sent
down the RF as soon as the new PSI table has been
calculated. Otherwise, PSI table updates are made in such
a way that the repetition interval for that table on the
RF remains constant.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.1.1.1.22 |
d5vControlCycleOutputPidsIf this is set to TRUE, then the D5 cycles through the pool
of unused PIDs when creating new PID remappings. The
purpose of this is to limit the amound of PID reusage E.g.
if a set-top using a buffered PMT table to view a program
where the program may have been deleted and the PIDs may be
in use by a different program now.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.1.1.1.23 |
d5vControlOverSubscriptionSafetyMarginThe amount of bandwidth in Kbps for the D5 to maintain
as unused bandwidth on each QAM. Purpose of this being
to help prevent over-subscription from occuring at the
cost of some wasted bandwidth.rw Unsigned32 .1.3.6.1.4.1.4115.1.8.1.1.1.1.24 |
d5vControlOverSubscriptionRecoveryEnabledIf this is set to TRUE, then the D5 will attempt to
recover automatically from a QAM-overscribed condition by
shutting down active programs selectively. It selects
which programs to shut down by order of most recently
activated, checks the new bitrates, then continues to
shutdown more programs as neccessary untill the total
bandwidth fits within the QAM available bandwidth.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.1.1.1.25 |
d5vControlFilterCaDescModeIf this is configured, then the D5 will remove
CA_Descriptors from incoming streams. This includes
descriptors in CAT and PMT tables, and in the case of
PMT it includes the 1st and 2nd loop. This is set to
'neither' by default.rw Enumeration .1.3.6.1.4.1.4115.1.8.1.1.1.1.26 |
d5vControlAllowTsidDuplicationIf this is set to TRUE, then the D5 chassis can be
configured with identical TSIDs on multiple QAM channels
. Duplicate TSIDs should be used with some caution
because the use of such is not currently compatible with
conditional-access encryption, channel-container
replication, or PSIG generation. This is set to FALSE by
default.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.1.1.1.27 |
d5vControlPcrDriftCorrectionIf this is set to TRUE, then PCR drift correction of input
MPEG streams is enabled on the resultant output stream.
Otherwise, the functionality is disabled.rwdeprecated TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.1.1.1.28 |
d5vControlProgramOverSubscriptionIf this is set to TRUE, then the D5 will attempt to
recover automatically from a QAM-overscribed condition by
shutting down active programs selectively. It selects
which programs to shut down by order of most recently
activated, checks the new bitrates, then continues to
shutdown more programs as neccessary untill the total
bandwidth fits within the QAM available bandwidth.rw D5VideoProgramOverSubscriptionAction .1.3.6.1.4.1.4115.1.8.1.1.1.1.29 |
d5vControlProgramOverSubscriptionPeriodThe period of time in seconds over which bandwidth
is monitored before an over-subscription action is
triggered.rwdeprecated Unsigned32 .1.3.6.1.4.1.4115.1.8.1.1.1.1.30 |
d5vControlProgramOverSubscriptionThresholdThe amount of bandwidth in percent by which a program
stream may exceed it's configured limit before triggering
the action specified by d5vControlProgramOverSubscription.rw Unsigned32 .1.3.6.1.4.1.4115.1.8.1.1.1.1.31 |
d5vControlPreEncDetectIf this is set to TRUE, then the D5 will detect Motorola
pre-encrypted streams, and will avoid re-encrypting the
traffic when forwarding it downstream. If set to TRUE,
the d5vControlFilterCaDesc setting is ignored for any
pre-encrypted streams that match this rule, because the
stream could not otherwise be decrypted.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.1.1.1.32 |
d5vControlUtilPercentThreshThe percentage utilization threshold of the QAM bandwidth
at which the D5 will generate an alarm. The purpose of this
is to facilitate monitoring of QAM bandwidth where the QAM
might not necessarily be oversubscribed.rw Unsigned32 .1.3.6.1.4.1.4115.1.8.1.1.1.1.33 |
d5vControlDefaultPidMappingProgramStartThe starting program-number to map to the start of the default
mapping pid range.rw Unsigned32 .1.3.6.1.4.1.4115.1.8.1.1.1.1.34 |
d5vControlDefaultPidMappingProgramCountThe number of programs to use for the default pid range.rw Unsigned32 .1.3.6.1.4.1.4115.1.8.1.1.1.1.35 |
d5vControlDefaultPidMappingPidCountThe number of PIDs to use per-program. Determines the
PID offset for each program number in the default range.
There is a legal limit of 4096 on the values of
d5vControlDefaultPidMappingProgramCount multiplied by
d5vControlDefaultPidMappingPidCount.rw Unsigned32 .1.3.6.1.4.1.4115.1.8.1.1.1.1.36 |
d5vControlOnProgramConflictDisconnectOlderStreamIf enabled, program conflicts trigger the older of the two
streams to be disconnected. I.E. the newer stream takes
the program number.
NOTE: this only affects streams which have the same
destination udp&IP values, and differ by source-IP.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.1.1.1.37 |
d5vControlPcrDriftCorrectionGainGain-control used in PCR-drift calculation. In units of
1/10000.rwdeprecated Unsigned32 .1.3.6.1.4.1.4115.1.8.1.1.1.1.38 |
d5vControlPcrDriftCorrectionUpperThresholdUpper-threshold used in PCR-drift calculation. In units of
tenths of milliseconds.rwdeprecated Unsigned32 .1.3.6.1.4.1.4115.1.8.1.1.1.1.39 |
d5vControlPcrDriftCorrectionLowerThresholdLower-threshold used in PCR-drift calculation. In units of
tenths of milliseconds.rwdeprecated Unsigned32 .1.3.6.1.4.1.4115.1.8.1.1.1.1.40 |
d5vControlNullDroppingRateThe rate used when performing NULL packet dropping.
In units of Kbps - setting will be rounded up
to the nearest 150 Kbps multiplerwdeprecated Unsigned32 .1.3.6.1.4.1.4115.1.8.1.1.1.1.41 |
d5VideoQamStreamTableThis table stores MPEG Video related data on a per QAM channel
basis. Ultimately this table will AUGMENT that supported by the
QAM RF Manager but for the moment it is standalone but using
the same index, ifIndex SEQUENCE OF D5VideoQamStreamEntry .1.3.6.1.4.1.4115.1.8.1.1.1.2 |
d5VideoQamStreamEntry D5VideoQamStreamEntry .1.3.6.1.4.1.4115.1.8.1.1.1.2.1 |
d5vQamNitPIDThe PID value to us when generating NIT tables on this QAM
channel. The default value is 16, the DVB requirementrw D5PID .1.3.6.1.4.1.4115.1.8.1.1.1.2.1.1 |
d5vQamTransportStreamIDThe MPEG transport_stream_id used when transmitting PAT
tables on this QAM channel. The default value is specific
to the slot number where the QAM channel is located.rw Unsigned32 .1.3.6.1.4.1.4115.1.8.1.1.1.2.1.2 |
d5vQamTsMibIndexThe index of the outgoing Transport Stream on this QAM
channel. A value of 0 means there are no MPEG Programs
being transmitted at present, so there will be no related
entry in the d5vTransportStreamTable.ro D5TransportStreamIndex .1.3.6.1.4.1.4115.1.8.1.1.1.2.1.3 |
d5vQamTotalPatsTxThe total number of unique PAT Tables that have been
generated for this QAM channel.ro Counter32 .1.3.6.1.4.1.4115.1.8.1.1.1.2.1.4 |
d5vQamTotalProgramsTxThe accumulated number of Programs transmitted on this QAM
channel.ro Counter32 .1.3.6.1.4.1.4115.1.8.1.1.1.2.1.5 |
d5vQamCurrentProgramsTxThe number of Programs currently being transmitted on this
QAM channel.ro Gauge32 .1.3.6.1.4.1.4115.1.8.1.1.1.2.1.6 |
d5vQamPatIntervalRetransmission interval for PAT tables in milliseconds.rw Unsigned32 .1.3.6.1.4.1.4115.1.8.1.1.1.2.1.7 |
d5vQamPmtIntervalRetransmission interval for PMT tables in milliseconds.rw Unsigned32 .1.3.6.1.4.1.4115.1.8.1.1.1.2.1.8 |
d5vQamNitIntervalRetransmission interval for NIT tables in milliseconds.rw Unsigned32 .1.3.6.1.4.1.4115.1.8.1.1.1.2.1.9 |
d5vQamSdtIntervalRetransmission interval for SDT tables in milliseconds.rw Unsigned32 .1.3.6.1.4.1.4115.1.8.1.1.1.2.1.10 |
d5vQamOriginalNetworkIdDVB original-network-id to be used in downstream .rw Unsigned32 .1.3.6.1.4.1.4115.1.8.1.1.1.2.1.11 |
d5vQamNetworkIdDVB network-id to be used in downstream .rw Unsigned32 .1.3.6.1.4.1.4115.1.8.1.1.1.2.1.12 |
d5vQamNetworkNameDVB network-name to be used in downstream .rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.1.1.2.1.13 |
d5vQamPassThroughTypeThis can be used to disable the default Arris prog/pid
remapping scheme, and use pass-through remapping instead.
Can also be used to enable MPTS-pass-through mode.rw Enumeration .1.3.6.1.4.1.4115.1.8.1.1.1.2.1.14 |
d5vQamConfVideoSiStreamEnabledUsed to enable/disable video-si-stream configuration.
At least one of UDP/src-IP/dest-IP must be non-zero for
this video-si-stream rule to be functional.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.1.1.2.1.15 |
d5vQamConfVideoSiStreamUdpDestVideo-si-stream UDP destination port.(A value of 0 in
a rule means that the udp-port can be ANY value for
pattern-matching)rw Unsigned32 .1.3.6.1.4.1.4115.1.8.1.1.1.2.1.16 |
d5vQamConfVideoSiStreamIpSrcVideo-si-stream IP source address.(A value of 0 in
a rule means that the src-IP can be ANY value for
pattern-matching)rw IpAddress .1.3.6.1.4.1.4115.1.8.1.1.1.2.1.17 |
d5vQamConfVideoSiStreamIpDestVideo-si-stream IP destination address.(A value of 0 in
a rule means that the dest-IP can be ANY value for
pattern-matching)rw IpAddress .1.3.6.1.4.1.4115.1.8.1.1.1.2.1.18 |
d5vQamActiveVideoSiStreamEnabledUsed to indicate if the QAM is currently passing a
video-si-stream.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.1.1.2.1.19 |
d5vQamActiveVideoSiStreamUdpDestActive video-si-stream UDP destination port.ro Unsigned32 .1.3.6.1.4.1.4115.1.8.1.1.1.2.1.20 |
d5vQamActiveVideoSiStreamIpSrcActive video-si-stream IP source address.ro IpAddress .1.3.6.1.4.1.4115.1.8.1.1.1.2.1.21 |
d5vQamActiveVideoSiStreamIpDestActive video-si-stream IP destination address.ro IpAddress .1.3.6.1.4.1.4115.1.8.1.1.1.2.1.22 |
d5vQamStreamStatusCurrent status of this QAM Transport streamro D5TransportStreamStatus .1.3.6.1.4.1.4115.1.8.1.1.1.2.1.23 |
d5vQamTimeActivatedThe value of sysUpTime when this stream was last activated.
Zero if not-applicable.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.1.1.2.1.24 |
d5vQamTimeActiveThe total time that MPEG stream has been active.ro Counter32 UNITS "seconds" .1.3.6.1.4.1.4115.1.8.1.1.1.2.1.25 |
d5vQamTimeDeactivatedThe value of sysUpTime when this stream was last
deactivated. Zero if not-known.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.1.1.2.1.26 |
d5vQamAutoGeneratePATFlag specifying whether or not the auto-generation by the
D5 of PAT tables is enabledrw D5GeneratePat .1.3.6.1.4.1.4115.1.8.1.1.1.2.1.27 |
d5vQamAutoGenerateCATFlag specifying whether or not the auto-generation by the
D5 of CAT tables is enabledrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.1.1.2.1.28 |
d5vQamAutoGeneratePMTFlag specifying whether or not the auto-generation by the
D5 of PMT tables is enabledrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.1.1.2.1.29 |
d5vQamAutoGenerateNITFlag specifying whether or not the auto-generation by the
D5 of NIT tables is enabled(and the associated entry
in the PAT table for the NIT-PID)rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.1.1.2.1.30 |
d5vQamAutoGenerateSDTFlag specifying whether or not the auto-generation by the
D5 of SDT tables is enabledrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.1.1.2.1.31 |
d5vQamAutoGenerateTDTFlag specifying whether or not the auto-generation by the
D5 of TDT tables is enabledrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.1.1.2.1.32 |
d5vQamAutoGenerateTOTFlag specifying whether or not the auto-generation by the
D5 of TOT tables is enabledrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.1.1.2.1.33 |
d5vQamCatIntervalRetransmission interval for CAT tables in milliseconds.rw Unsigned32 .1.3.6.1.4.1.4115.1.8.1.1.1.2.1.34 |
d5vQamMaxProgramsPerQamChannelMaximum number of programs allowed on a Qam channel at any
one time.(Some QAM H/W may restrict to 31)rw Unsigned32 .1.3.6.1.4.1.4115.1.8.1.1.1.2.1.35 |
d5vQamAllowEsDvbPidsFlag that determines whether or not DVB-reserved PIDS are
allowed to be used for elementary-streams.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.1.1.2.1.36 |
d5vQamDefaultMappingSchemeThe mapping scheme to be used for input transport-streams
that have no associated static-configuration.
NOTE: the udpPortLegacy scheme cannot be configured
against an individual QAM-channel. If so desired, it may
be turned on globally in the d5vControlDefaultMappingScheme
MIB entry.rw D5VideoDefaultMappingScheme .1.3.6.1.4.1.4115.1.8.1.1.1.2.1.37 |
d5vQamFastPsiTableUpdatesIf this is set to TRUE, then PSI table updates are sent
down the RF as soon as the new PSI table has been
calculated. Otherwise, PSI table updates are made in such
a way that the repetition interval for that table on the
RF remains constant. (Set to FALSE by default)rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.1.1.2.1.38 |
d5vQamCycleOutputPidsIf this is set to TRUE, then the D5 cycles through the pool
of unused PIDs when creating new PID remappings. The
purpose of this is to limit the amound of PID reusage E.g.
if a set-top using a buffered PMT table to view a program
where the program may have been deleted and the PIDs may be
in use by a different program now. (Set to FALSE by default
)rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.1.1.2.1.39 |
d5vQamOverSubscribedIndicates if the bandwidth of this QAM is currently
over-subscribed. If the QAM is currently over-subscribed,
some programs will suffer packet-loss. The affected
programs are identified in the d5QamProgramPcrBufferTable.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.1.1.2.1.40 |
d5vQamOverSubscriptionSafetyMarginThe amount of bandwidth in Kbps for the D5 to maintain
as unused bandwidth on each QAM. Purpose of this being
to help prevent over-subscription from occuring at the
cost of some wasted bandwidth.rw Unsigned32 .1.3.6.1.4.1.4115.1.8.1.1.1.2.1.41 |
d5vQamOverSubscriptionRecoveryEnabledIf this is set to TRUE, then the D5 will attempt to
recover automatically from a QAM-overscribed condition by
shutting down active programs selectively. It selects
which programs to shut down by order of most recently
activated, checks the new bitrates, then continues to
shutdown more programs as neccessary untill the total
bandwidth fits within the QAM available bandwidth.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.1.1.2.1.42 |
d5vQamFilterCaDescModeIf this is configured, then the D5 will remove
CA_Descriptors from incoming streams destined for this QAM.
This includes descriptors in CAT and PMT tables, and in
the case of PMT includes the 1st and 2nd loop. This is
set to 'neither' by default.rw Enumeration .1.3.6.1.4.1.4115.1.8.1.1.1.2.1.43 |
d5vQamPcrDriftCorrectionIf this is set to TRUE, then PCR drift correction of input
MPEG streams is enabled on the resultant output stream.
Otherwise, the functionality is disabled.rwdeprecated TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.1.1.2.1.44 |
d5vQamPreEncDetectIf this is set to TRUE, then the D5 will detect Motorola
pre-encrypted streams, and will avoid re-encrypting the
traffic when forwarding it downstream. If set to TRUE,
the d5vControlFilterCaDesc setting is ignored for any
pre-encrypted streams that match this rule, because the
stream could not otherwise be decrypted.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.1.1.2.1.45 |
d5vQamUtilPercentThreshThe percentage utilization threshold of the QAM bandwidth
at which the D5 will generate an alarm. The purpose of this
is to facilitate monitoring of QAM bandwidth where the QAM
might not necessarily be oversubscribed.rw Unsigned32 .1.3.6.1.4.1.4115.1.8.1.1.1.2.1.46 |
d5vQamOnProgramConflictDisconnectOlderStreamIf enabled, program conflicts trigger the older of the two
streams to be disconnected. I.E. the newer stream takes
the program number.
NOTE: this only affects streams which have the same
destination udp&IP values, and differ by source-IP.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.1.1.2.1.47 |
d5vQamNullDroppingRateThe rate used when performing NULL packet dropping.
In units of Kbps - setting will be rounded up
to the nearest 150 Kbps multiplerwdeprecated Unsigned32 .1.3.6.1.4.1.4115.1.8.1.1.1.2.1.48 |
d5vQamConfVideoSiStreamTsidRemapThe default behaviour of video-si streams is not to remap
the ingress Transport_Stream_id so that the TS_ID in the
PAT matches the value in the other SI tables. Enabling
this parameter, overrides the default behaviour and remaps
the TS_ID in the PAT to the value configured on the QAM
channel.
NOTE: this only affects streams which are configured as
video-si-stream.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.1.1.2.1.49 |
d5VideoUdpIpStreamTableThis table displays the current incoming Transport Streams and
can be configured with specific rules to override the default
Program Number mappings. This table has a higher precedence
than the d5VideoUdpPortPnTable. If the IP Address associated
with an incoming TS matches a configured entry in this table
then the associated mapping will apply, otherwise the default
mapping from d5vUdpPortPnTable will apply and an dynamic entry
will be created in this table.
Active entries contain a reference to either a specific QAM
or a specific channel-container. When a stream is treated as
a virtual-program, the d5vIpActiveChanContName field is set to
indicate which channel-container this stream is being mapped
to. For any individual active entry in this table, either
d5vIpActiveQamIfIndex or d5vIpActiveChanContName is set - not
both. SEQUENCE OF D5VideoUdpIpStreamEntry .1.3.6.1.4.1.4115.1.8.1.1.1.3 |
d5VideoUdpIpStreamEntry D5VideoUdpIpStreamEntry .1.3.6.1.4.1.4115.1.8.1.1.1.3.1 |
d5vIpUdpIndexThe destination UDP Port to be mapped to the specified QAM
Channel and Program Number.(A value of 0 in a rule means
that the udp-port can be ANY value for pattern-matching)rw Unsigned32 .1.3.6.1.4.1.4115.1.8.1.1.1.3.1.1 |
d5vIpSrcIndexThe SRC IP address of the TS to be mapped to the specified
QAM Channel and Program Number.(A value of 0 in a rule
means that the src-IP can be ANY value for pattern-matching
)rw IpAddress .1.3.6.1.4.1.4115.1.8.1.1.1.3.1.2 |
d5vIpDestIndexThe DEST IP address of the TS to be mapped to the specified
QAM Channel and Program Number.(A value of 0 in a rule
means that the dest-IP can be ANY value for
pattern-matching)rw IpAddress .1.3.6.1.4.1.4115.1.8.1.1.1.3.1.3 |
d5vIpRowStatusThe RowStatus for controlling entries in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.1.1.3.1.4 |
d5vIpTsMibIndexThe index of the entry in the d5VideoStreamTable
for corresponding to this table entry.ro D5TransportStreamIndex .1.3.6.1.4.1.4115.1.8.1.1.1.3.1.5 |
d5vIpMappingTypeThe type of entry, configured or dynamic.ro D5MappingType .1.3.6.1.4.1.4115.1.8.1.1.1.3.1.6 |
d5vIpConfQamIfIndexThe ifIndex of the QAM channel that this IP transport
stream is configured to be mapped to. A value of 0
indicates that no mapping is configured.rw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.4115.1.8.1.1.1.3.1.7 |
d5vIpStreamStatusCurrent status of this IP Transport streamro D5TransportStreamStatus .1.3.6.1.4.1.4115.1.8.1.1.1.3.1.8 |
d5vIpActiveQamIfIndexThe ifIndex of the QAM channel that this stream is
currently mapped to.ro InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.4115.1.8.1.1.1.3.1.9 |
d5vIpActiveChanContNameThe name of the channel-container that this stream is
currently mapped to.ro D5VideoChannelContainerNameType .1.3.6.1.4.1.4115.1.8.1.1.1.3.1.10 |
d5vIpTimeActivatedThe value of sysUpTime when this stream was last activated.
Zero if not-applicable.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.1.1.3.1.11 |
d5vIpTimeActiveThe total time that MPEG stream has been active.ro Counter32 UNITS "seconds" .1.3.6.1.4.1.4115.1.8.1.1.1.3.1.12 |
d5vIpTimeDeactivatedThe value of sysUpTime when this stream was last
deactivated. Zero if not-known.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.1.1.3.1.13 |
d5vIpConfProgPassThroughEnabledThis can be used to configure default PROG remapping
for this stream. If this is set to TRUE, input PROGs are
mapped to identical output PROGs (as if pass-through
mode were enabled on the QAM).rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.1.1.3.1.14 |
d5vIpActiveProgPassThroughEnabledIndicates if default PROG-remapping is currently
enabled for this stream. (May differ from the value of
d5vIpConfProgPassThroughEnabled where a dynamic entry is
created based on static-rules).ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.1.1.3.1.15 |
d5vIpConfPidPassThroughEnabledThis can be used to configure default PID remapping
for this stream. If this is set to TRUE, input PIDs are
mapped to identical output PIDs (as if pass-through
mode were enabled on the QAM).rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.1.1.3.1.16 |
d5vIpActivePidPassThroughEnabledIndicates if default PID-remapping is currently
enabled for this stream. (May differ from the value of
d5vIpConfPidPassThroughEnabled where a dynamic entry is
created based on static-rules).ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.1.1.3.1.17 |
d5vIpConfRedundantMulticastThis can be used to configure a video stream for redundancy
May be set to TRUE only if the d5vIpSrcIndex is set to 0
and the d5vIpDestIndex is set to a valid multicast address
and the d5vIpUdpIndex is set to a non-zero value.
When this value is set to TRUE, the D5 WAN card doesn't
distinguish between packets with different srcIp values,
where the d5vIpUdpIndex and d5vIpDestIndex match this rule.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.1.1.3.1.18 |
d5vIpActiveRedundantMulticastIndicates if redundant-multicast is currently enabled for
this stream. (May differ from the value of
d5vIpConfRedundantMulticast where a dynamic entry is
created based on static-rules).rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.1.1.3.1.19 |
d5vIpConfPersistenceThis is used to toggle the table entry as being volatile or
non-volatile. If set to volatile, it is not saved across
card resets.
This setting is only meaningful for entries that have
a d5vIpMappingType of staticrw D5PersistenceType .1.3.6.1.4.1.4115.1.8.1.1.1.3.1.20 |
d5VideoStreamTableThis table stores basic information on all Transport Streams
in the D5. It covers both incoming and outgoing ones. The MPEG
Manager automatically creates any entry in this table when it
detects a new incoming TS or begins to generate a new outgoing
TS. SEQUENCE OF D5VideoStreamEntry .1.3.6.1.4.1.4115.1.8.1.1.1.4 |
d5VideoStreamEntry D5VideoStreamEntry .1.3.6.1.4.1.4115.1.8.1.1.1.4.1 |
d5vStreamDirectionIndexThe direction of this Transport Stream.ro D5TransportStreamDirection .1.3.6.1.4.1.4115.1.8.1.1.1.4.1.1 |
d5vStreamTsMibIndexThe unique index that identifies the Transport Stream
within the D5.ro D5TransportStreamIndex .1.3.6.1.4.1.4115.1.8.1.1.1.4.1.2 |
d5vStreamPatVersionThe version number of the current PAT Table for this
Transport Stream.ro Unsigned32 .1.3.6.1.4.1.4115.1.8.1.1.1.4.1.3 |
d5vStreamTsIDThe MPEG transport_stream_id in the PAT tables on this
Transport Stream.ro Unsigned32 .1.3.6.1.4.1.4115.1.8.1.1.1.4.1.4 |
d5vStreamProgramCountThe number of Programs currently in this Transport
Stream.ro Gauge32 .1.3.6.1.4.1.4115.1.8.1.1.1.4.1.5 |
d5vStreamPatCurrTimeCreatedThe value of sysUpTime when the current PAT was created.
Zero if not-applicable.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.1.1.4.1.6 |
d5vStreamPatCurrTimeActiveThe total time the current PAT has been active.ro Counter32 UNITS "seconds" .1.3.6.1.4.1.4115.1.8.1.1.1.4.1.7 |
d5vStreamPatPrevTimeCreatedThe value of sysUpTime when the predecessor of this PAT was
created. Zero if not-known.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.1.1.4.1.8 |
d5vStreamCatVersionThe version number of the current CAT Table for this
Transport Stream.ro Unsigned32 .1.3.6.1.4.1.4115.1.8.1.1.1.4.1.9 |
d5vStreamCatCurrTimeCreatedThe value of sysUpTime when the current CAT was created.
Zero if not-applicable.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.1.1.4.1.10 |
d5vStreamCatCurrTimeActiveThe total time the current CAT has been active.ro Counter32 UNITS "seconds" .1.3.6.1.4.1.4115.1.8.1.1.1.4.1.11 |
d5vStreamCatPrevTimeCreatedThe value of sysUpTime when the predecessor of this CAT was
created. Zero if not-known.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.1.1.4.1.12 |
d5VideoStreamProgramTableThis table stores basic information for each Program in each
Transport Stream known to the D5. Each entry in
d5VideoStreamTable will have at least one entry in this table. SEQUENCE OF D5VideoStreamProgramEntry .1.3.6.1.4.1.4115.1.8.1.1.1.5 |
d5VideoStreamProgramEntry D5VideoStreamProgramEntry .1.3.6.1.4.1.4115.1.8.1.1.1.5.1 |
d5vStreamProgTsMibIndexThe unique index that identifies the Transport Stream
containing this Program.ro D5TransportStreamIndex .1.3.6.1.4.1.4115.1.8.1.1.1.5.1.1 |
d5vStreamProgIndexThe Program Number for this program within the associated
Transport Stream.ro D5Program .1.3.6.1.4.1.4115.1.8.1.1.1.5.1.2 |
d5vStreamProgPmtVersionThe version number of the current PMT Table for this
Program.ro Unsigned32 .1.3.6.1.4.1.4115.1.8.1.1.1.5.1.3 |
d5vStreamProgPmtPidThe MPEG PID used for the PMT Table for this Program.ro D5PID .1.3.6.1.4.1.4115.1.8.1.1.1.5.1.4 |
d5vStreamProgPcrPidThe MPEG PID used to for the PCR for this Program.ro D5PID .1.3.6.1.4.1.4115.1.8.1.1.1.5.1.5 |
d5vStreamProgEsCountThe number of Elementary Streams currently in this
Program.ro Gauge32 .1.3.6.1.4.1.4115.1.8.1.1.1.5.1.6 |
d5vStreamProgDescCountThe number of Descriptors in the PMT 'first_loop' for this
Program.ro Gauge32 .1.3.6.1.4.1.4115.1.8.1.1.1.5.1.7 |
d5vStreamPmtCurrTimeCreatedThe value of sysUpTime when the current PMT was created.
Zero if not-applicable.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.1.1.5.1.8 |
d5vStreamPmtCurrTimeActiveThe total time the current PMT has been active.ro Counter32 UNITS "seconds" .1.3.6.1.4.1.4115.1.8.1.1.1.5.1.9 |
d5vStreamPmtPrevTimeCreatedThe value of sysUpTime when the predecessor of this PMT was
created. Zero if not-known.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.1.1.5.1.10 |
d5vStreamProgBitrateThe bitate in Kbps, of this Program. This may have a value
of 0 if the bitrate is not known.ro Unsigned32 .1.3.6.1.4.1.4115.1.8.1.1.1.5.1.11 |
d5VideoStreamEsTableThis table stores basic information for each Elementary Stream
in each Transport Stream known to the D5. Each entry in
d5VideoProgTable will have at least one entry in this table.
These entries are created automatically as the D5 processes PMT
table entries for each Elementary Stream in a Program SEQUENCE OF D5VideoStreamEsEntry .1.3.6.1.4.1.4115.1.8.1.1.1.6 |
d5VideoStreamEsEntry D5VideoStreamEsEntry .1.3.6.1.4.1.4115.1.8.1.1.1.6.1 |
d5vStreamEsTsMibIndexThe unique index that identifies the Transport Stream
containing this Program.ro D5TransportStreamIndex .1.3.6.1.4.1.4115.1.8.1.1.1.6.1.1 |
d5vStreamEsProgIndexThe Program Number for this program within the associated
Transport Stream.ro D5Program .1.3.6.1.4.1.4115.1.8.1.1.1.6.1.2 |
d5vStreamEsPidIndexThe MPEG PID used for this Elementary Stream.ro D5PID .1.3.6.1.4.1.4115.1.8.1.1.1.6.1.3 |
d5vStreamEsTypeThe type of this Elementary Streams.ro D5ElementaryStreamType .1.3.6.1.4.1.4115.1.8.1.1.1.6.1.4 |
d5vStreamEsDescCountThe number of Descriptors in the PMT 'second_loop' for
this Elementary Stream.ro Gauge32 .1.3.6.1.4.1.4115.1.8.1.1.1.6.1.5 |
d5VideoStreamDescTableThis table stores MPEG Descriptors for each Elementary Stream
and Program known to the D5. The PMT PID is used to index
Program Descriptors while the Elementary Stream PID is used
when indexing ES Descriptors. SEQUENCE OF D5VideoStreamDescEntry .1.3.6.1.4.1.4115.1.8.1.1.1.7 |
d5VideoStreamDescEntry D5VideoStreamDescEntry .1.3.6.1.4.1.4115.1.8.1.1.1.7.1 |
d5vStreamDescTsMibIndexThe unique index that identifies the Transport Stream
containing this Descriptor.ro D5TransportStreamIndex .1.3.6.1.4.1.4115.1.8.1.1.1.7.1.1 |
d5vStreamDescPidIndexThe MPEG PID used for this Elementary Stream.ro D5PID .1.3.6.1.4.1.4115.1.8.1.1.1.7.1.2 |
d5vStreamDescIndexThe Descriptor index.ro D5DescriptorIndex .1.3.6.1.4.1.4115.1.8.1.1.1.7.1.3 |
d5vStreamDescTagThe Descriptor tag.ro D5DescriptorTag .1.3.6.1.4.1.4115.1.8.1.1.1.7.1.4 |
d5vStreamDescLenThe Descriptor length.ro INTEGER ( 1..255) .1.3.6.1.4.1.4115.1.8.1.1.1.7.1.5 |
d5vStreamDescDataThe Descriptor data.ro D5DescriptorBuffer .1.3.6.1.4.1.4115.1.8.1.1.1.7.1.6 |
d5VideoLookupTsidToIfIndexTableThis table maps the transport_stream_id of a Transport Stream
on a QAM channel to the ifIndex for that channel. SEQUENCE OF D5VideoLookupTsidToIfIndexEntry .1.3.6.1.4.1.4115.1.8.1.1.1.8 |
d5VideoLookupTsidToIfIndexEntry D5VideoLookupTsidToIfIndexEntry .1.3.6.1.4.1.4115.1.8.1.1.1.8.1 |
d5vLookupTsidIfIndexThe ifIndex for the QAM channel transmitting this
transport_stream_id.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4115.1.8.1.1.1.8.1.1 |
d5VideoLookupTsMibIndexToIfIndexTableThis table maps the TsIndex of an outgoing Transport Stream on
a QAM channel to the ifIndex for that channel. The Transport
Stream is assumed to be an 'outgoing' one. SEQUENCE OF D5VideoLookupTsMibIndexToIfIndexEntry .1.3.6.1.4.1.4115.1.8.1.1.1.9 |
d5VideoLookupTsMibIndexToIfIndexEntry D5VideoLookupTsMibIndexToIfIndexEntry .1.3.6.1.4.1.4115.1.8.1.1.1.9.1 |
d5vLookupTsIndexIfIndexThe ifIndex for the QAM channel transmitting this
TransportStreamIndex.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4115.1.8.1.1.1.9.1.1 |
d5VideoLookupQamTsMibIndexToInTsMibIndexTableThis table maps the TransportStreamIndex of a Transport Stream
on a QAM channel to the corresponding incoming
TransportStreamIndexes.
d5vTsMibIndex - an outgoing Transport Stream
d5vInTsMibIndex - the corresponding incoming Transport
Stream. SEQUENCE OF D5VideoLookupQamTsMibIndexToInTsMibIndexEntry .1.3.6.1.4.1.4115.1.8.1.1.1.10 |
d5VideoLookupQamTsMibIndexToInTsMibIndexEntry D5VideoLookupQamTsMibIndexToInTsMibIndexEntry .1.3.6.1.4.1.4115.1.8.1.1.1.10.1 |
d5vLookupInTsMibIndexMIB TsIndex for an incoming transport stream(IP).ro D5TransportStreamIndex .1.3.6.1.4.1.4115.1.8.1.1.1.10.1.1 |
d5VideoLookupTsMibIndexToUdpIpTableThis table maps the TransportStreamIndex of an incoming
Transport Stream to the IP address and UDP port for that
Transport Stream. SEQUENCE OF D5VideoLookupTsMibIndexToUdpIpEntry .1.3.6.1.4.1.4115.1.8.1.1.1.11 |
d5VideoLookupTsMibIndexToUdpIpEntry D5VideoLookupTsMibIndexToUdpIpEntry .1.3.6.1.4.1.4115.1.8.1.1.1.11.1 |
d5vLookupTsMibIndexUdpPortThe UDP receiving the Transport Stream for
TransportStreamIndex.ro Unsigned32 .1.3.6.1.4.1.4115.1.8.1.1.1.11.1.1 |
d5vLookupTsMibIndexIpAddressSrcThe SRC IP address receiving the Transport Stream for
TransportStreamIndex.ro IpAddress .1.3.6.1.4.1.4115.1.8.1.1.1.11.1.2 |
d5vLookupTsMibIndexIpAddressDestThe DEST IP address receiving the Transport Stream for
TransportStreamIndex.ro IpAddress .1.3.6.1.4.1.4115.1.8.1.1.1.11.1.3 |
d5VideoUdpIpStreamProgRemapTableThis table displays the active Program mappings for Transport
Streams. It is indexed using udp/ip/ip/inProg/qamIfIndex to
support multiple output programs for each input program. SEQUENCE OF D5VideoUdpIpStreamProgRemapEntry .1.3.6.1.4.1.4115.1.8.1.1.1.12 |
d5VideoUdpIpStreamProgRemapEntry D5VideoUdpIpStreamProgRemapEntry .1.3.6.1.4.1.4115.1.8.1.1.1.12.1 |
d5vProgRemapUdpIndexThe destination UDP Port of the incoming TS.ro Unsigned32 .1.3.6.1.4.1.4115.1.8.1.1.1.12.1.1 |
d5vProgRemapIpSrcIndexThe SRC IP address of the incoming TS.ro IpAddress .1.3.6.1.4.1.4115.1.8.1.1.1.12.1.2 |
d5vProgRemapIpDestIndexThe DEST IP address of the incoming TS.ro IpAddress .1.3.6.1.4.1.4115.1.8.1.1.1.12.1.3 |
d5vProgRemapInProgIndexThe incoming Program value related to this Program
remapping.ro D5Program .1.3.6.1.4.1.4115.1.8.1.1.1.12.1.4 |
d5vProgRemapActiveQamIfIndexThe ifIndex of the QAM channel that this Program remapping
applies to.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4115.1.8.1.1.1.12.1.5 |
d5vProgRemapOutProgThe output Program value related to this Program mapping
rule.ro D5Program .1.3.6.1.4.1.4115.1.8.1.1.1.12.1.6 |
d5vProgRemapStatusCurrent status of this Program - whether active or notro D5ProgStatus .1.3.6.1.4.1.4115.1.8.1.1.1.12.1.7 |
d5vProgRemapActiveProgTypeThe type of Program whether PSI or Elementary stream.ro D5ProgType .1.3.6.1.4.1.4115.1.8.1.1.1.12.1.8 |
d5vProgRemapTimeActivatedThe value of sysUpTime when this Program was last
activated. Zero if not-applicable.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.1.1.12.1.9 |
d5vProgRemapTimeActiveThe total time that the Program has been active.ro Counter32 UNITS "seconds" .1.3.6.1.4.1.4115.1.8.1.1.1.12.1.10 |
d5vProgRemapTimeDeactivatedThe value of sysUpTime when this Program was last
deactivated. Zero if not-known.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.1.1.12.1.11 |
d5VideoUdpIpStreamPidRemapTableThis table displays the active PID mappings for Transport
Streams. It is indexed using udp/ip/ip/inPid/qamIfIndex to
support multiple output programs for each input program. SEQUENCE OF D5VideoUdpIpStreamPidRemapEntry .1.3.6.1.4.1.4115.1.8.1.1.1.13 |
d5VideoUdpIpStreamPidRemapEntry D5VideoUdpIpStreamPidRemapEntry .1.3.6.1.4.1.4115.1.8.1.1.1.13.1 |
d5vPidRemapUdpIndexThe destination UDP Port of the incoming TS.ro Unsigned32 .1.3.6.1.4.1.4115.1.8.1.1.1.13.1.1 |
d5vPidRemapIpSrcIndexThe SRC IP address of the incoming TS.ro IpAddress .1.3.6.1.4.1.4115.1.8.1.1.1.13.1.2 |
d5vPidRemapIpDestIndexThe DEST IP address of the incoming TS.ro IpAddress .1.3.6.1.4.1.4115.1.8.1.1.1.13.1.3 |
d5vPidRemapInPidIndexThe incoming PID value related to this PID remapping.ro D5PID .1.3.6.1.4.1.4115.1.8.1.1.1.13.1.4 |
d5vPidRemapActiveQamIfIndexThe ifIndex of the QAM channel that this PID remapping
applies to.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4115.1.8.1.1.1.13.1.5 |
d5vPidRemapOutPidThe output PID value related to this PID mapping rule.ro D5PID .1.3.6.1.4.1.4115.1.8.1.1.1.13.1.6 |
d5vPidRemapStatusCurrent status of this PID - whether active or notro D5PidStatus .1.3.6.1.4.1.4115.1.8.1.1.1.13.1.7 |
d5vPidRemapActivePidTypeThe type of PID whether PSI or Elementary stream.ro D5PidType .1.3.6.1.4.1.4115.1.8.1.1.1.13.1.8 |
d5vPidRemapTimeActivatedThe value of sysUpTime when this PID was last activated.
Zero if not-applicable.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.1.1.13.1.9 |
d5vPidRemapTimeActiveThe total time that the PID has been active.ro Counter32 UNITS "seconds" .1.3.6.1.4.1.4115.1.8.1.1.1.13.1.10 |
d5vPidRemapTimeDeactivatedThe value of sysUpTime when this PID was last deactivated.
Zero if not-known.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.1.1.13.1.11 |
d5VideoRuleQamProgRemapTableTable contains list of qam-channel based configured program
remapping rules. SEQUENCE OF D5VideoRuleQamProgRemapEntry .1.3.6.1.4.1.4115.1.8.1.1.1.14 |
d5VideoRuleQamProgRemapEntry D5VideoRuleQamProgRemapEntry .1.3.6.1.4.1.4115.1.8.1.1.1.14.1 |
d5vRQamProgRowStatusThe RowStatus for controlling entries in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.1.1.14.1.1 |
d5vRQamProgOutProgThe output Program value related to this rule.rw D5Program .1.3.6.1.4.1.4115.1.8.1.1.1.14.1.2 |
d5vRQamProgMatchLastTimeThe value of sysUpTime when this rule was last
matched/used at run-time. Zero if not-applicable.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.1.1.14.1.3 |
d5vRQamProgMatchCountThe number of times this rule was matched/used at
run-time. Zero if not-applicable.ro Counter32 .1.3.6.1.4.1.4115.1.8.1.1.1.14.1.4 |
d5vRQamProgPersistenceThis is used to toggle the table entry as being volatile or
non-volatile. If set to volatile, it is not saved across
card resets.rw D5PersistenceType .1.3.6.1.4.1.4115.1.8.1.1.1.14.1.5 |
d5VideoRuleQamProgFilterTableTable contains list of qam-channel based configured program
filter rules. SEQUENCE OF D5VideoRuleQamProgFilterEntry .1.3.6.1.4.1.4115.1.8.1.1.1.15 |
d5VideoRuleQamProgFilterEntry D5VideoRuleQamProgFilterEntry .1.3.6.1.4.1.4115.1.8.1.1.1.15.1 |
d5vRQamProgFiltRowStatusThe RowStatus for controlling entries in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.1.1.15.1.1 |
d5vRQamProgFiltMatchLastTimeThe value of sysUpTime when this rule was last matched/used
at run-time. Zero if not-applicable.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.1.1.15.1.2 |
d5vRQamProgFiltMatchCountThe number of times this rule was matched/used at run-time.
Zero if not-applicable.ro Counter32 .1.3.6.1.4.1.4115.1.8.1.1.1.15.1.3 |
d5vRQamProgFiltPersistenceThis is used to toggle the table entry as being volatile or
non-volatile. If set to volatile, it is not saved across
card resets.rw D5PersistenceType .1.3.6.1.4.1.4115.1.8.1.1.1.15.1.4 |
d5VideoRuleQamPidRemapTableTable contains list of qam-channel based configured PID
remapping rules. SEQUENCE OF D5VideoRuleQamPidRemapEntry .1.3.6.1.4.1.4115.1.8.1.1.1.16 |
d5VideoRuleQamPidRemapEntry D5VideoRuleQamPidRemapEntry .1.3.6.1.4.1.4115.1.8.1.1.1.16.1 |
d5vRQamPidRowStatusThe RowStatus for controlling entries in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.1.1.16.1.1 |
d5vRQamPidOutPidThe output PID value related to this rule.rw D5PID .1.3.6.1.4.1.4115.1.8.1.1.1.16.1.2 |
d5vRQamPidLastMatchTimeThe value of sysUpTime when this rule was last
matched/used at run-time. Zero if not-applicable.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.1.1.16.1.3 |
d5vRQamPidMatchCountThe number of times this rule was matched/used at
run-time. Zero if not-applicable.ro Counter32 .1.3.6.1.4.1.4115.1.8.1.1.1.16.1.4 |
d5vRQamPidPersistenceThis is used to toggle the table entry as being volatile or
non-volatile. If set to volatile, it is not saved across
card resets.rw D5PersistenceType .1.3.6.1.4.1.4115.1.8.1.1.1.16.1.5 |
d5VideoRuleQamPidFilterTableTable contains list of qam-channel based configured PID filter
rules. SEQUENCE OF D5VideoRuleQamPidFilterEntry .1.3.6.1.4.1.4115.1.8.1.1.1.17 |
d5VideoRuleQamPidFilterEntry D5VideoRuleQamPidFilterEntry .1.3.6.1.4.1.4115.1.8.1.1.1.17.1 |
d5vRQamPidFiltRowStatusThe RowStatus for controlling entries in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.1.1.17.1.1 |
d5vRQamPidFiltLastMatchTimeThe value of sysUpTime when this rule was last matched/used
at run-time. Zero if not-applicable.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.1.1.17.1.2 |
d5vRQamPidFiltMatchCountThe number of times this rule was matched/used at run-time.
Zero if not-applicable.ro Counter32 .1.3.6.1.4.1.4115.1.8.1.1.1.17.1.3 |
d5vRQamPidFiltPersistenceThis is used to toggle the table entry as being volatile or
non-volatile. If set to volatile, it is not saved across
card resets.rw D5PersistenceType .1.3.6.1.4.1.4115.1.8.1.1.1.17.1.4 |
d5VideoRuleUdpIpProgFilterTableTable contains list of UDP/IP based configured program filter
rules. SEQUENCE OF D5VideoRuleUdpIpProgFilterEntry .1.3.6.1.4.1.4115.1.8.1.1.1.18 |
d5VideoRuleUdpIpProgFilterEntry D5VideoRuleUdpIpProgFilterEntry .1.3.6.1.4.1.4115.1.8.1.1.1.18.1 |
d5vRUdpIpProgFiltRowStatusThe RowStatus for controlling entries in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.1.1.18.1.1 |
d5vRUdpIpProgFiltMatchLastTimeThe value of sysUpTime when this rule was last matched/used
at run-time. Zero if not-applicable.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.1.1.18.1.2 |
d5vRUdpIpProgFiltMatchCountThe number of times this rule was matched/used at run-time.
Zero if not-applicable.ro Counter32 .1.3.6.1.4.1.4115.1.8.1.1.1.18.1.3 |
d5vRUdpIpProgFiltPersistenceThis is used to toggle the table entry as being volatile or
non-volatile. If set to volatile, it is not saved across
card resets.rw D5PersistenceType .1.3.6.1.4.1.4115.1.8.1.1.1.18.1.4 |
d5VideoRuleUdpIpPidFilterTableTable contains list of UDP/IP based configured PID filter
rules. SEQUENCE OF D5VideoRuleUdpIpPidFilterEntry .1.3.6.1.4.1.4115.1.8.1.1.1.19 |
d5VideoRuleUdpIpPidFilterEntry D5VideoRuleUdpIpPidFilterEntry .1.3.6.1.4.1.4115.1.8.1.1.1.19.1 |
d5vRUdpIpPidFiltRowStatusThe RowStatus for controlling entries in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.1.1.19.1.1 |
d5vRUdpIpPidFiltLastMatchTimeThe value of sysUpTime when this rule was last matched/used
at run-time. Zero if not-applicable.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.1.1.19.1.2 |
d5vRUdpIpPidFiltMatchCountThe number of times this rule was matched/used at run-time.
Zero if not-applicable.ro Counter32 .1.3.6.1.4.1.4115.1.8.1.1.1.19.1.3 |
d5vRUdpIpPidFiltPersistenceThis is used to toggle the table entry as being volatile or
non-volatile. If set to volatile, it is not saved across
card resets.rw D5PersistenceType .1.3.6.1.4.1.4115.1.8.1.1.1.19.1.4 |
d5VideoRuleUdpIpProgRemapTableTable contains list of udp/ip based configured program
remapping rules. SEQUENCE OF D5VideoRuleUdpIpProgRemapEntry .1.3.6.1.4.1.4115.1.8.1.1.1.20 |
d5VideoRuleUdpIpProgRemapEntry D5VideoRuleUdpIpProgRemapEntry .1.3.6.1.4.1.4115.1.8.1.1.1.20.1 |
d5vRUdpIpProgUdpIndexThe destination UDP Port of the incoming TS.(A value of 0
in a rule means that the udp-port can be ANY value for
pattern-matching)rw Unsigned32 .1.3.6.1.4.1.4115.1.8.1.1.1.20.1.1 |
d5vRUdpIpProgIpSrcIndexThe SRC IP address of the incoming TS.(NOTE: a value of
'0' here indicates a don't care value for
pattern-matching)rw IpAddress .1.3.6.1.4.1.4115.1.8.1.1.1.20.1.2 |
d5vRUdpIpProgIpDestIndexThe DEST IP address of the incoming TS.(NOTE: a value of
'0' here indicates a don't care value for
pattern-matching)rw IpAddress .1.3.6.1.4.1.4115.1.8.1.1.1.20.1.3 |
d5vRUdpIpProgInProgIndexThe incoming Program value related to this Program
remapping.rw D5Program .1.3.6.1.4.1.4115.1.8.1.1.1.20.1.4 |
d5vRUdpIpProgRowStatusThe RowStatus for controlling entries in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.1.1.20.1.5 |
d5vRUdpIpProgOutProgThe output Program value related to this Program mapping
rule.rw D5Program .1.3.6.1.4.1.4115.1.8.1.1.1.20.1.6 |
d5vRUdpIpProgMatchLastTimeThe value of sysUpTime when this rule was last
matched/used at run-time. Zero if not-applicable.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.1.1.20.1.7 |
d5vRUdpIpProgMatchCountThe number of times this rule was matched/used at
run-time. Zero if not-applicable.ro Counter32 .1.3.6.1.4.1.4115.1.8.1.1.1.20.1.8 |
d5vRUdpIpProgPersistenceThis is used to toggle the table entry as being volatile or
non-volatile. If set to volatile, it is not saved across
card resets.rw D5PersistenceType .1.3.6.1.4.1.4115.1.8.1.1.1.20.1.9 |
d5vRUdpIpProgExpectedBitrateThe expected bitate in Kbps, of the video program. If this
is set it is used to calculate the initial jitter-buffer
size to be used for the program when it is activated.
(may be set to 0 to indicated an unknown value)rw Unsigned32 .1.3.6.1.4.1.4115.1.8.1.1.1.20.1.10 |
d5VideoRuleUdpIpPidRemapTableTable contains list of udp/ip based configured pid
remapping rules. SEQUENCE OF D5VideoRuleUdpIpPidRemapEntry .1.3.6.1.4.1.4115.1.8.1.1.1.21 |
d5VideoRuleUdpIpPidRemapEntry D5VideoRuleUdpIpPidRemapEntry .1.3.6.1.4.1.4115.1.8.1.1.1.21.1 |
d5vRUdpIpPidUdpIndexThe destination UDP Port of the incoming TS.(A value of 0
in a rule means that the udp-port can be ANY value for
pattern-matching)rw Unsigned32 .1.3.6.1.4.1.4115.1.8.1.1.1.21.1.1 |
d5vRUdpIpPidIpSrcIndexThe SRC IP address of the incoming TS.(NOTE: a value of '0'
here indicates a don't care value for pattern-matching
rules)rw IpAddress .1.3.6.1.4.1.4115.1.8.1.1.1.21.1.2 |
d5vRUdpIpPidIpDestIndexThe DEST IP address of the incoming TS.(NOTE: a value of
'0' here indicates a don't care value for pattern-matching
rules)rw IpAddress .1.3.6.1.4.1.4115.1.8.1.1.1.21.1.3 |
d5vRUdpIpPidInPidIndexThe incoming PID value related to this PID remapping.rw D5PID .1.3.6.1.4.1.4115.1.8.1.1.1.21.1.4 |
d5vRUdpIpPidRowStatusThe RowStatus for controlling entries in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.1.1.21.1.5 |
d5vRUdpIpPidOutPidThe output PID value related to this PID mapping rule.rw D5PID .1.3.6.1.4.1.4115.1.8.1.1.1.21.1.6 |
d5vRUdpIpPidMatchLastTimeThe value of sysUpTime when this rule was last
matched/used at run-time. Zero if not-applicable.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.1.1.21.1.7 |
d5vRUdpIpPidMatchCountThe number of times this rule was matched/used at
run-time. Zero if not-applicable.ro Counter32 .1.3.6.1.4.1.4115.1.8.1.1.1.21.1.8 |
d5vRUdpIpPidPersistenceThis is used to toggle the table entry as being volatile or
non-volatile. If set to volatile, it is not saved across
card resets.rw D5PersistenceType .1.3.6.1.4.1.4115.1.8.1.1.1.21.1.9 |
d5VideoUdpIpSiStreamTableThis table displays the statically allocated SI-streams.
SI-streams are dedicated IP streams that provide SI table for
a particular QAM channel. The data in an SI stream is sent to
the QAM without any PID remapping and it is assumed that the
SI-stream does not conflict with any elementary-streams, or
auto-generated (P)SI tables.
SI-streams are typically used when (P)SI table auto-generation
is disabled on the D5.
The variables d5vIpSiConfQamIfIndex and
d5vIpSiConfChanContName are mutually exclusive, where a value
of 0 for ifIndex or 0-length for d5vIpSiConfChanContName can be
used to indicate an unspecified value. SEQUENCE OF D5VideoUdpIpSiStreamEntry .1.3.6.1.4.1.4115.1.8.1.1.1.22 |
d5VideoUdpIpSiStreamEntry D5VideoUdpIpSiStreamEntry .1.3.6.1.4.1.4115.1.8.1.1.1.22.1 |
d5vIpUdpSiIndexThe destination UDP Port to be mapped to the specified QAM
Channel and Program Number.rw Unsigned32 .1.3.6.1.4.1.4115.1.8.1.1.1.22.1.1 |
d5vIpSrcSiIndexThe SRC IP address of the SI TS to be mapped to the
specified QAM Channel and Program Number.rw IpAddress .1.3.6.1.4.1.4115.1.8.1.1.1.22.1.2 |
d5vIpDestSiIndexThe DEST IP address of the SI TS to be mapped to the
specified QAM Channel and Program Number.rw IpAddress .1.3.6.1.4.1.4115.1.8.1.1.1.22.1.3 |
d5vIpSiRowStatusThe RowStatus for controlling entries in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.1.1.22.1.4 |
d5vIpSiTsMibIndexThe index of the entry in the d5VideoStreamTable
for corresponding to this table entry.ro D5TransportStreamIndex .1.3.6.1.4.1.4115.1.8.1.1.1.22.1.5 |
d5vIpSiConfQamIfIndexThe ifIndex of the QAM channel that this SI-stream is
configured to be mapped to.rw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.4115.1.8.1.1.1.22.1.6 |
d5vIpSiConfChanContNameThe name of the channel-container that this SI-stream
is configured to be mapped to.rw D5VideoChannelContainerNameType .1.3.6.1.4.1.4115.1.8.1.1.1.22.1.7 |
d5vIpSiStreamStatusCurrent status of this IP SI Transport streamro D5TransportStreamStatus .1.3.6.1.4.1.4115.1.8.1.1.1.22.1.8 |
d5vIpSiTimeActivatedThe value of sysUpTime when this stream was last activated.
Zero if not-applicable.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.1.1.22.1.9 |
d5vIpSiTimeActiveThe total time that MPEG stream has been active.ro Counter32 UNITS "seconds" .1.3.6.1.4.1.4115.1.8.1.1.1.22.1.10 |
d5vIpSiTimeDeactivatedThe value of sysUpTime when this stream was last
deactivated. Zero if not-known.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.1.1.22.1.11 |
d5vIpSiPersistenceThis is used to toggle the table entry as being volatile or
non-volatile. If set to volatile, it is not saved across
card resets.rw D5PersistenceType .1.3.6.1.4.1.4115.1.8.1.1.1.22.1.12 |
d5vIpSiCopybackThis is used to setup the SI stream as an EAS stream.ro Unsigned32 .1.3.6.1.4.1.4115.1.8.1.1.1.22.1.13 |
d5VideoChannelContainerTableTable contains list of channel-containers that can be used
to group individual QAM-channels together. Channel-containers
can serve multiple purposes:
- group qam-channels to which an EMM can be multicast.
- group qam-channels to which an input transport-stream
can be replicated.
- ... SEQUENCE OF D5VideoChannelContainerEntry .1.3.6.1.4.1.4115.1.8.1.1.1.30 |
d5VideoChannelContainerEntry D5VideoChannelContainerEntry .1.3.6.1.4.1.4115.1.8.1.1.1.30.1 |
d5vChanContNameChannel-container identifier.rw D5VideoChannelContainerNameType .1.3.6.1.4.1.4115.1.8.1.1.1.30.1.1 |
d5vChanContRowStatusThe RowStatus for controlling entries in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.1.1.30.1.2 |
d5vChanContServiceIdCommon program-number used for virtual-programs in this
channel-container.
(may be set to 0 to indicate an unspecified value)rw D5Program .1.3.6.1.4.1.4115.1.8.1.1.1.30.1.3 |
d5vChanContPidCommon PID used for EMM or PDG data in this channel-
container.
(may be set to 0 to indicate an unspecified value)rw D5PID .1.3.6.1.4.1.4115.1.8.1.1.1.30.1.4 |
d5vChanContPersistenceThis is used to toggle the table entry as being volatile or
non-volatile. If set to volatile, it is not saved across
card resets.rw D5PersistenceType .1.3.6.1.4.1.4115.1.8.1.1.1.30.1.5 |
d5VideoChannelContainerQamTableTable contains list of QAM channel-container group memberships.
A single QAM can be a member of multiple replication groups.
A single QAM can also be a member of the same replication
group multiple times, using different output programs.
The index variables d5vChanContQamIfIndex and
d5vChanContQamTsidIndex must be considered mutually exclusive,
where a value of 0 for either ifIndex or TSID can be used to
indicate an unspecified value.
One of, but not both of, these must be non-zero in any
particular row, in order to constitute a valid row-index. SEQUENCE OF D5VideoChannelContainerQamEntry .1.3.6.1.4.1.4115.1.8.1.1.1.31 |
d5VideoChannelContainerQamEntry D5VideoChannelContainerQamEntry .1.3.6.1.4.1.4115.1.8.1.1.1.31.1 |
d5vChanContQamIfIndexThe ifIndex of the QAM channel.
(may be set to 0 to indicated an unspecified value)rw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.4115.1.8.1.1.1.31.1.1 |
d5vChanContQamTsidIndexThe MPEG transport_stream_id of the QAM-channel.
(may be set to 0 to indicated an unspecified value)rw Unsigned32 .1.3.6.1.4.1.4115.1.8.1.1.1.31.1.2 |
d5vChanContQamProgIndexThe output program number associated with this membership
rule.
(may be set to 0 to indicated an unspecified value)rw D5Program .1.3.6.1.4.1.4115.1.8.1.1.1.31.1.3 |
d5vChanContQamRowStatusThe RowStatus for controlling entries in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.1.1.31.1.4 |
d5vChanContQamPersistenceThis is used to toggle the table entry as being volatile or
non-volatile. If set to volatile, it is not saved across
card resets.rw D5PersistenceType .1.3.6.1.4.1.4115.1.8.1.1.1.31.1.5 |
d5VideoChannelContainerVirtProgTableTable contains list of virtual programs with their associated
channel-container names. Virtual programs are used for
creating replications where individual input streams are
copied to to multiple concurrent output QAMs/Programs.
(NOTE: a virtual-program can belong to no more than 1
channel-containers) SEQUENCE OF D5VideoChannelContainerVirtProgEntry .1.3.6.1.4.1.4115.1.8.1.1.1.32 |
d5VideoChannelContainerVirtProgEntry D5VideoChannelContainerVirtProgEntry .1.3.6.1.4.1.4115.1.8.1.1.1.32.1 |
d5vChanContVProgUdpIndexThe destination UDP Port of the incoming TS.(A value of 0
in a rule means that the udp-port can be ANY value for
pattern-matching)rw Unsigned32 .1.3.6.1.4.1.4115.1.8.1.1.1.32.1.1 |
d5vChanContVProgSrcIpIndexThe SRC IP address of the incoming TS.(NOTE: a value of '0'
here indicates a don't care value for pattern-matching
rules)rw IpAddress .1.3.6.1.4.1.4115.1.8.1.1.1.32.1.2 |
d5vChanContVProgDestIpIndexThe DEST IP address of the incoming TS.(NOTE: a value of
'0' here indicates a don't care value for pattern-matching
rules)rw IpAddress .1.3.6.1.4.1.4115.1.8.1.1.1.32.1.3 |
d5vChanContVProgRowStatusThe RowStatus for controlling entries in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.1.1.32.1.4 |
d5vChanContVProgNameChannel-container identifier. Must match an entry in
the d5VideoChannelContainerTable table.rw D5VideoChannelContainerNameType .1.3.6.1.4.1.4115.1.8.1.1.1.32.1.5 |
d5vChanContVProgConfProgPassThroughEnabledThis can be used to configure default PROG remapping
for this stream. If this is set to TRUE, input PROGs are
mapped to identical output PIDs (as if pass-through
mode were enabled on the QAM).rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.1.1.32.1.6 |
d5vChanContVProgConfPidPassThroughEnabledThis can be used to configure default PID remapping
for this stream. If this is set to TRUE, input PIDs are
mapped to identical output PIDs (as if pass-through
mode were enabled on the QAM).rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.1.1.32.1.7 |
d5vChanContVProgConfRedundantMulticastThis can be used to configure a video stream for redundancy
May be set to TRUE only if the d5vIpSrcIndex is set to 0
and the d5vIpDestIndex is set to a valid multicast address
and the d5vIpUdpIndex is set to a non-zero value.
When this value is set to TRUE, the D5 WAN card doesn't
distinguish between packets with different srcIp values,
where the d5vIpUdpIndex and d5vIpDestIndex match this rule.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.1.1.32.1.8 |
d5vChanContVProgPersistenceThis is used to toggle the table entry as being volatile or
non-volatile. If set to volatile, it is not saved across
card resets.rw D5PersistenceType .1.3.6.1.4.1.4115.1.8.1.1.1.32.1.9 |
d5vChanContVProgExpectedBitrateThe expected bitate in Kbps, of the video program. If this
is set it is used to calculate the initial jitter-buffer
size to be used for the program when it is activated.
(may be set to 0 to indicated an unknown value)rw Unsigned32 .1.3.6.1.4.1.4115.1.8.1.1.1.32.1.10 |
d5vChanContVProgConfVideoSiStreamEnabledUsed to configure this virtual-program to be treated as a
video-si-stream.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.1.1.32.1.11 |
d5VideoQamJitterTableThis Table contains list of rules that regulate the amount of
jitter buffering in milliseconds that is used used for video
programs.
Can be used to increase jitter buffering so that the D5 will
smooth out video programs that may have a lot of jitter, or
alternatively to decrease jitter buffering so that the latency
through the D5 is reduced.
The low and high bitrate thresholds are not allowed to
overlap between rules that share the same ifIndex and serviceId
. SEQUENCE OF D5VideoQamJitterEntry .1.3.6.1.4.1.4115.1.8.1.1.1.33 |
d5VideoQamJitterEntry D5VideoQamJitterEntry .1.3.6.1.4.1.4115.1.8.1.1.1.33.1 |
d5vQamJitterIfIndexThe ifIndex of the QAM channel associated with this rule.
(may be set to 0 to indicated an unspecified value)rw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.4115.1.8.1.1.1.33.1.1 |
d5vQamJitterServiceIdThe output program number associated with this rule.
(may be set to 0 to indicated an unspecified value)rw D5Program .1.3.6.1.4.1.4115.1.8.1.1.1.33.1.2 |
d5vQamJitterThreshBitrateLowThe lower bitate threshold in Kbps, of the video stream(s)
for which this jitter setting is to be used.
(may be set to 0 to indicated an unspecified lower value)rw Unsigned32 .1.3.6.1.4.1.4115.1.8.1.1.1.33.1.3 |
d5vQamJitterThreshBitrateHighThe upper bitate threshold in Kbps, of the video stream(s)
for which this jitter setting is to be used.
(may be set to 0 to indicated an unspecified upper value)rw Unsigned32 .1.3.6.1.4.1.4115.1.8.1.1.1.33.1.4 |
d5vQamJitterMillisecondsThe setting for jitter-buffer length in milliseconds for
video programs matching this rule.
Can be set to a small value to reduce latency through the
box, or set to a higher value to compensate for more
jitter in the input video stream.rw Unsigned32 .1.3.6.1.4.1.4115.1.8.1.1.1.33.1.5 |
d5vQamJitterRowStatusThe RowStatus for controlling entries in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.1.1.33.1.6 |
d5vQamJitterPersistenceThis is used to toggle the table entry as being volatile or
non-volatile. If set to volatile, it is not saved across
card resets.rw D5PersistenceType .1.3.6.1.4.1.4115.1.8.1.1.1.33.1.7 |
d5VideoQamJitterStatusTableThis Table contains status information about the QAM dejitter
buffers on a per-program basis. Entries in this table only
persist for the life-time of the active programs, and are
created & deleted on the fly as programs are shutdown &
restarted. The counters are reset when the program is shutdown,
or when the jitter-buffer is reset. SEQUENCE OF D5VideoQamJitterStatusEntry .1.3.6.1.4.1.4115.1.8.1.1.1.34 |
d5VideoQamJitterStatusEntry D5VideoQamJitterStatusEntry .1.3.6.1.4.1.4115.1.8.1.1.1.34.1 |
d5QamJitterStatusIfIndexThe ifIndex of the QAM channel associated with this entry.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4115.1.8.1.1.1.34.1.1 |
d5QamJitterStatusServiceIdThe output program number associated with this entry.ro D5Program .1.3.6.1.4.1.4115.1.8.1.1.1.34.1.2 |
d5QamJitterStatusCurrStatusThe status of the jitter buffer for this program.
idle - waiting for input TS packets
fillingBuffer - waiting for the dejitter buffer to fill
up for normal operation.
active - operating normally, passing traffic.
underflow - not receiving enough traffic, buffer has
been reset.
overflow - receiving too much traffic, buffer has
been reset.ro Enumeration .1.3.6.1.4.1.4115.1.8.1.1.1.34.1.3 |
d5QamJitterStatusUnderflowCountNumber of times the jitter buffer has underflowed during
the lifetime of this program.ro Unsigned32 .1.3.6.1.4.1.4115.1.8.1.1.1.34.1.4 |
d5QamJitterStatusOverflowCountNumber of times the jitter buffer has overflowed during
the lifetime of this program.ro Unsigned32 .1.3.6.1.4.1.4115.1.8.1.1.1.34.1.5 |
d5QamJitterStatusBufferLengthInBytesThe number of bytes in-use for the jitter buffer of this
program.ro Unsigned32 .1.3.6.1.4.1.4115.1.8.1.1.1.34.1.6 |
d5QamJitterStatusFixedBufferLengthIndicates if the jitter buffer for this program consists
of a fixed number of bytes, or if the QAM-FPGA is
configured to reallocate memory dynamically
as the program-bitrate fluctuates.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.1.1.34.1.7 |
d5QamJitterStatusBufferLengthInMsThe size of the jitter buffer for this program in
milliseconds.ro Unsigned32 .1.3.6.1.4.1.4115.1.8.1.1.1.34.1.8 |
d5vQamJitterStatusBitrateThe bitate in Kbps, of this Program. This may have a value
of 0 if the bitrate is not known.ro Unsigned32 .1.3.6.1.4.1.4115.1.8.1.1.1.34.1.9 |
d5QamJitterStatusResetQueueWrite a value of TRUE to empty the jitter buffer,
(re)initialize the active buffer-length to the configured
value in the d5VideoQamJitterTable, and reset the jitter
buffer state back to the initial idle state.
NOTE: resetting the buffer results in a temporary loss
of MPEG output for the affected program since the buffer
is wiped and refilled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.1.1.34.1.10 |
d5QamJitterStatusBufferSizeInBytesThe number of bytes allocated for the jitter buffer of
this program.ro Unsigned32 .1.3.6.1.4.1.4115.1.8.1.1.1.34.1.11 |
d5VideoQamLogTableThe (conceptual) table listing the router's PIM interfaces.
IGMP and PIM are enabled on all interfaces listed in this
table. SEQUENCE OF D5VideoQamLogEntry .1.3.6.1.4.1.4115.1.8.1.1.1.40 |
d5VideoQamLogEntryAn entry (conceptual row) in the d5QamLogTable. D5VideoQamLogEntry .1.3.6.1.4.1.4115.1.8.1.1.1.40.1 |
d5vQamLogDateTimeIndexThe Date/Time of event occurance. DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.1.1.40.1.1 |
d5vQamLogSubIndexIndex used to address QAM event logs which occur at the same time.ro Unsigned32 .1.3.6.1.4.1.4115.1.8.1.1.1.40.1.2 |
d5vQamLogSlotNumQAM card associated with a particular event.ro Unsigned32 .1.3.6.1.4.1.4115.1.8.1.1.1.40.1.3 |
d5vQamLogPortNumQAM card port number associated with a particular event.ro Unsigned32 .1.3.6.1.4.1.4115.1.8.1.1.1.40.1.4 |
d5vQamLogQamNumQAM card QAM number associated with a particular event.ro Unsigned32 .1.3.6.1.4.1.4115.1.8.1.1.1.40.1.5 |
d5vQamLogStateCurrent state of the Event Logro D5VideoQamLogQamState .1.3.6.1.4.1.4115.1.8.1.1.1.40.1.6 |
d5vQamLogDurationEvent Log duration in mSecs (only valid for START/STOP type entries)ro Unsigned32 .1.3.6.1.4.1.4115.1.8.1.1.1.40.1.7 |
d5vQamLogDescriptionQAM event description.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.1.1.40.1.8 |
d5VideoRuleQamSiStreamGhostPidFilterTableTable contains list of qam-channel based configured ghost PID rules
. Ghost PIDs can only be used for video-si-streams. The reason
for this being that it's not reasonable to map multiple copies of
the same input PID to a single output PID. Tying ghost-pids to
video-si-stream ensures that only one copy of a particular
ghost-pid will be mapped to any particular QAM-channel at any one
time, since only one video-si-stream can be active on a QAM-channel
at a time. SEQUENCE OF D5VideoRuleQamSiStreamGhostPidFilterEntry .1.3.6.1.4.1.4115.1.8.1.1.1.41 |
d5VideoRuleQamSiStreamGhostPidFilterEntry D5VideoRuleQamSiStreamGhostPidFilterEntry .1.3.6.1.4.1.4115.1.8.1.1.1.41.1 |
d5vRQamSiStreamGhostPidFiltRowStatusThe RowStatus for controlling entries in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.1.1.41.1.1 |
d5vRQamSiStreamGhostPidFiltLastMatchTimeThe value of sysUpTime when this rule was last matched/used
at run-time. Zero if not-applicable.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.1.1.41.1.2 |
d5vRQamSiStreamGhostPidFiltMatchCountThe number of times this rule was matched/used at run-time.
Zero if not-applicable.ro Counter32 .1.3.6.1.4.1.4115.1.8.1.1.1.41.1.3 |
d5vRQamSiStreamGhostPidFiltPersistenceThis is used to toggle the table entry as being volatile or
non-volatile. If set to volatile, it is not saved across
card resets.rw D5PersistenceType .1.3.6.1.4.1.4115.1.8.1.1.1.41.1.4 |
d5VideoRuleSiStreamGhostPidFilterTableTable contains list of configured ghost PID filter rules.
. Ghost PIDs can only be used for video-si-streams. The reason
for this being that it's not reasonable to map multiple copies of
the same input PID to a single output PID. Tying ghost-pids to
video-si-stream ensures that only one copy of a particular
ghost-pid will be mapped to any particular QAM-channel at any one
time, since only one video-si-stream can be active on a QAM-channel
at a time. SEQUENCE OF D5VideoRuleSiStreamGhostPidFilterEntry .1.3.6.1.4.1.4115.1.8.1.1.1.42 |
d5VideoRuleSiStreamGhostPidFilterEntry D5VideoRuleSiStreamGhostPidFilterEntry .1.3.6.1.4.1.4115.1.8.1.1.1.42.1 |
d5vRSiStreamGhostPidFiltRowStatusThe RowStatus for controlling entries in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.1.1.42.1.1 |
d5vRSiStreamGhostPidFiltLastMatchTimeThe value of sysUpTime when this rule was last matched/used
at run-time. Zero if not-applicable.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.1.1.42.1.2 |
d5vRSiStreamGhostPidFiltMatchCountThe number of times this rule was matched/used at run-time.
Zero if not-applicable.ro Counter32 .1.3.6.1.4.1.4115.1.8.1.1.1.42.1.3 |
d5vRSiStreamGhostPidFiltPersistenceThis is used to toggle the table entry as being volatile or
non-volatile. If set to volatile, it is not saved across
card resets.rw D5PersistenceType .1.3.6.1.4.1.4115.1.8.1.1.1.42.1.4 |
d5VideoQamCaDescFiltTableThis Table contains a list of rules that regulate the filtering
of ca-descriptors from input CAT and PMT tables based on
specific ca-system-id values.
. SEQUENCE OF D5VideoQamCaDescFiltEntry .1.3.6.1.4.1.4115.1.8.1.1.1.43 |
d5VideoQamCaDescFiltEntry D5VideoQamCaDescFiltEntry .1.3.6.1.4.1.4115.1.8.1.1.1.43.1 |
d5vQamCaDescFiltIfIndexThe ifIndex of the QAM channel associated with this rule.
(may be set to 0 to indicated an unspecified value)rw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.4115.1.8.1.1.1.43.1.1 |
d5vQamCaDescFiltSysIdThe CA-system-ID value associated with this rule.rw Unsigned32 .1.3.6.1.4.1.4115.1.8.1.1.1.43.1.2 |
d5vQamCaDescFiltCaDescControls the filtering of descriptors from the CAT table.rw Enumeration .1.3.6.1.4.1.4115.1.8.1.1.1.43.1.3 |
d5vQamCaDescFiltRowStatusThe RowStatus for controlling entries in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.1.1.43.1.4 |
d5vQamCaDescFiltPersistenceThis is used to toggle the table entry as being volatile or
non-volatile. If set to volatile, it is not saved across
card resets.rw D5PersistenceType .1.3.6.1.4.1.4115.1.8.1.1.1.43.1.5 |
d5VideoRuleQamStreamGhostPidTableTable contains list of qam-channel based configured ghost PID rules.
Ghost PIDs may only be used for video-streams and
can be in the range 1 to 8190.
Care must be taken not to map multiple copies of
the same input PID to a single output PID. SEQUENCE OF D5VideoRuleQamStreamGhostPidFilterEntry .1.3.6.1.4.1.4115.1.8.1.1.1.44 |
d5VideoRuleQamStreamGhostPidFilterEntry D5VideoRuleQamStreamGhostPidFilterEntry .1.3.6.1.4.1.4115.1.8.1.1.1.44.1 |
d5vRQamStreamGhostPidFiltRowStatusThe RowStatus for controlling entries in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.1.1.44.1.1 |
d5vRQamStreamGhostPidFiltOutPidThe output PID value related to this rule.rw D5PID .1.3.6.1.4.1.4115.1.8.1.1.1.44.1.2 |
d5vRQamStreamGhostPidFiltLastMatchTimeThe value of sysUpTime when this rule was last
matched/used at run-time. Zero if not-applicable.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.1.1.44.1.3 |
d5vRQamStreamGhostPidFiltMatchCountThe number of times this rule was matched/used at
run-time. Zero if not-applicable.ro Counter32 .1.3.6.1.4.1.4115.1.8.1.1.1.44.1.4 |
d5vRQamStreamGhostPidFiltPersistenceThis is used to toggle the table entry as being volatile or
non-volatile. If set to volatile, it is not saved across
card resets.rw D5PersistenceType .1.3.6.1.4.1.4115.1.8.1.1.1.44.1.5 |
d5VideoRuleStreamGhostPidTableTable contains list of configured ghost PID filter rules.
Ghost PIDs may only be used for video-streams and
can be in the range 1 to 8190.
Care must be taken not to map multiple copies of
the same input PID to a single output PID. SEQUENCE OF D5VideoRuleStreamGhostPidFilterEntry .1.3.6.1.4.1.4115.1.8.1.1.1.45 |
d5VideoRuleStreamGhostPidFilterEntry D5VideoRuleStreamGhostPidFilterEntry .1.3.6.1.4.1.4115.1.8.1.1.1.45.1 |
d5vRStreamGhostPidFiltUdpIndexThe destination UDP Port of the incoming TS.(A value of 0
in a rule means that the udp-port can be ANY value for
pattern-matching)rw Unsigned32 .1.3.6.1.4.1.4115.1.8.1.1.1.45.1.1 |
d5vRStreamGhostPidFiltIpSrcIndexThe SRC IP address of the incoming TS.(NOTE: a value of '0'
here indicates a don't care value for pattern-matching
rules)rw IpAddress .1.3.6.1.4.1.4115.1.8.1.1.1.45.1.2 |
d5vRStreamGhostPidFiltIpDestIndexThe DEST IP address of the incoming TS.(NOTE: a value of
'0' here indicates a don't care value for pattern-matching
rules)rw IpAddress .1.3.6.1.4.1.4115.1.8.1.1.1.45.1.3 |
d5vRStreamGhostPidFiltInPidIndexThe incoming ghost PID value related to this rule.rw D5PID .1.3.6.1.4.1.4115.1.8.1.1.1.45.1.4 |
d5vRStreamGhostPidFiltRowStatusThe RowStatus for controlling entries in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.1.1.45.1.5 |
d5vRStreamGhostPidFiltMatchLastTimeThe value of sysUpTime when this rule was last
matched/used at run-time. Zero if not-applicable.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.4115.1.8.1.1.1.45.1.6 |
d5vRStreamGhostPidFiltMatchCountThe number of times this rule was matched/used at
run-time. Zero if not-applicable.ro Counter32 .1.3.6.1.4.1.4115.1.8.1.1.1.45.1.7 |
d5vRStreamGhostPidFiltPersistenceThis is used to toggle the table entry as being volatile or
non-volatile. If set to volatile, it is not saved across
card resets.rw D5PersistenceType .1.3.6.1.4.1.4115.1.8.1.1.1.45.1.8 |