ARRIS-MIB
The ARRIS-MIB module serves as the enterprise header for Arris cable modem termination systems (CMTS) and DOCSIS edge devices, aggregating references to vendor-specific objects for monitoring DOCSIS interface states, channel utilization, and subscriber session metrics.
Imported Objects
Objects
23 total| Object Name |
|---|
arrisThis is a header for the Arris enterprise MIB. All objects appear elsewhere. MODULE-IDENTITY .1.3.6.1.4.1.4115 |
arrisProducts OBJECT IDENTIFIER .1.3.6.1.4.1.4115.1 |
packetport OBJECT IDENTIFIER .1.3.6.1.4.1.4115.1.1 |
cm110 OBJECT IDENTIFIER .1.3.6.1.4.1.4115.1.2 |
arrisProdIdCM OBJECT IDENTIFIER .1.3.6.1.4.1.4115.1.3 |
tcm OBJECT IDENTIFIER .1.3.6.1.4.1.4115.1.3.8 |
ttm OBJECT IDENTIFIER .1.3.6.1.4.1.4115.1.3.9 |
ttp OBJECT IDENTIFIER .1.3.6.1.4.1.4115.1.3.10 |
arrisProdIdCMTS OBJECT IDENTIFIER .1.3.6.1.4.1.4115.1.4 |
cmtsMSAS OBJECT IDENTIFIER .1.3.6.1.4.1.4115.1.4.1 |
cmts1500 OBJECT IDENTIFIER .1.3.6.1.4.1.4115.1.4.2 |
cmtsC3 OBJECT IDENTIFIER .1.3.6.1.4.1.4115.1.4.3 |
cmtsC4 OBJECT IDENTIFIER .1.3.6.1.4.1.4115.1.4.4 |
cmtsCommon OBJECT IDENTIFIER .1.3.6.1.4.1.4115.1.4.5 |
arrisProdIdMRC OBJECT IDENTIFIER .1.3.6.1.4.1.4115.1.5 |
mrcController OBJECT IDENTIFIER .1.3.6.1.4.1.4115.1.5.1 |
arrisProdIdGlobalAccess OBJECT IDENTIFIER .1.3.6.1.4.1.4115.1.6 |
arrisGlobalAccessMib OBJECT IDENTIFIER .1.3.6.1.4.1.4115.1.6.1 |
arrisGlobalAccessProductUas OBJECT IDENTIFIER .1.3.6.1.4.1.4115.1.6.2 |
arrisProdIdVideo OBJECT IDENTIFIER .1.3.6.1.4.1.4115.1.8 |
arrisD5UEQam OBJECT IDENTIFIER .1.3.6.1.4.1.4115.1.8.1 |
arrisProdIdCER OBJECT IDENTIFIER .1.3.6.1.4.1.4115.1.9 |
arrisE6Cer OBJECT IDENTIFIER .1.3.6.1.4.1.4115.1.9.1 |
More MIBs from Arris International
Browse all Arris InternationalMIBs →The ARRIS-D5-VIDEO-MIB provides SNMP management interfaces for monitoring and controlling MPEG video transport streams and associated software processes on Arris DOCSIS 3.0/3.1 Cable Modem Termination Systems (CMTS). It exposes operational metrics for video channel status, stream health, and MPEG protocol state transitions to ensure reliable multicast video delivery over the cable network.
The CADANT-CMTS-SYSTEM-MIB provides management access to Arris E6000 Cable Modem Termination System (CMTS) hardware parameters and system constants, enabling the monitoring of critical device states such as CPU utilization, memory usage, temperature sensors, and interface operational status. This module facilitates the collection of system-level telemetry required for capacity planning, fault isolation, and performance analysis within DOCSIS-based cable networks.
The CADANT-CMTS-MAC-MIB provides vendor-specific extensions for Cadant CMTS hardware to map DOCSIF-MIB CM status indices to MAC address tables, enabling precise tracking of cable modem registration states, signal quality metrics, and interface bindings. This module facilitates granular troubleshooting of subscriber connectivity by correlating physical MAC addresses with logical DOCSIS session parameters on the upstream and downstream channels.
The ARRIS-CER-VIDEO-MIB provides SNMP management capabilities for monitoring and controlling MPEG video software processes and parameters on Arris Cable Edge Router (CER) platforms. It enables the tracking of video session states, stream quality metrics, and encoder/decoder operational status to ensure reliable content delivery.
The CADANT-CMTS-EQUIPMENT-MIB facilitates the remote provisioning, diagnostic testing, and auditing configuration of Arris E6 Cable Modem Termination System (CMTS) hardware, specifically managing card and port states while handling equipment-related trap notifications.
The CADANT-HW-MEAS-MIB aggregates hardware-specific counter metrics for the ARRIS C4 Cable Modem Termination System (CMTS), including standard hardware statistics grouped for engineering analysis. This module facilitates the monitoring of physical device health and resource utilization within the Cadant-managed C4 platform.