ALCATEL-IND1-E-SERVICE-MIB
AI MIB Summary
The ALCATEL-IND1-E-SERVICE-MIB module manages configuration parameters for Alcatel-Lucent E-Service features, enabling the monitoring and control of service-specific state variables and operational metrics on carrier-grade network equipment.
The parameters for configuration of the E-Service feature.
The right to make changes in specification and other information contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein.
Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used.
Copyright (C) 1995-2006 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE
Main OID:
alcatelIND1EServiceMIB.1.3.6.1.4.1.6486.801.1.2.1.50.1
96
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
96 total| Object Name |
|---|
alcatelIND1EServiceMIBThe parameters for configuration of the E-Service feature.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) 1995-2006 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDE MODULE-IDENTITY .1.3.6.1.4.1.6486.801.1.2.1.50.1 |
alcatelIND1eServiceMIBObjectsBranch For E-Service Managed Objects. OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.50.1.1 |
alaEService OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1 |
alaEServiceInfo OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.1 |
alaEServiceModeThe current mode configured for Vlan Stacking and Layer 2 tunnel configuration.
legacyMode (1) indicates that the commands from AlcatelIND1VLANStacking.mib are
to be used. eServiceMode (2) indicates the commands from this MIB are to be used.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.1.1 |
alaEServiceStatResetDefines the global clear statistics control for ethernet-service
counters.
default(0) - default value for this object,
reset(1) - indicates that all ethernet-service counters should be
cleared.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.1.2 |
alaEServiceSapProfileTableA table that contains service profiles containing performance and control attributes.
An entry in this table is created when a new service profile is defined. SEQUENCE OF AlaEServiceSapProfileEntry .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.2 |
alaEServiceSapProfileEntryA E-Service Service Profile entry. AlaEServiceSapProfileEntry .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.2.1 |
alaEServiceSapProfileIDA label given to uniquely identify this profile. Must be at least one character long. DisplayString .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.2.1.1 |
alaEServiceSapProfileCVLANTreatmentThe type of VLAN stacking operation to be performed on a customer frame entering
this service. Stack Svlan (1) indicates that the SVLAN is to be pre-pended on the
frame before any existing 802.1Q tag. Translate (2) means to replace the existing
802.1Q tag with the SVLAN. Change CVLAN (3) indicates that the customer tag is to
remain on the frame but its value is to be changed to the supplied value.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.2.1.2 |
alaEServiceSapProfileReplacementCVLANThe CVLAN ID to use when using the Change CVLAN treatment mode.rw INTEGER .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.2.1.3 |
alaEServiceSapProfilePriorityMapModeThis object describes the source of the value for the priority field of the SVLAN
802.1Q tag when pre-pended to the customer data frame. If set to notAssigned(0), SAP
priority limit parameter will not be effective, QoS priority settings needs to be
configured. mapInnerPtoOuterP (1) uses the priority field of the incoming frame when
tagged to fill in the priority field of the SVLAN tag. mapInnerDscpToOuterP (2) uses
the frames priority bits in its IP DSCP field to fill in the priority field of the
SVLAN tag. FixedP (3) uses the supplied FixedPriorityValue to fill in the SVLAN tag
priority bits.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.2.1.4 |
alaEServiceSapProfileFixedPriorityThis object describes the value of the priority field of the 802.1Q SVLAN tag
pre-pended to customer data frames when the fixed priority mapping mode is selected.rw INTEGER .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.2.1.5 |
alaEServiceSapProfileIngressBWThis object describes this limit of ingress bandwidth for the traffic to which
this profile is applied. If 0, no bandwidth limit is applied. This number represents
traffic in units of 1,000,000 bits per second. Note that all CVLAN that belong to this
SAP will share this aggregated limit.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.2.1.6 |
alaEServiceSapProfileBandwidthShareThis object describes the use of the bandwidth limit in how it is applied across
multiple ports of the SAP. If set to notApplicable(0), the SAP is not used. If set
to Shared (1), all the ports that are part of the SAP will use aggregated
bandwidth, sharing some part of the bandwidth limit. If set to notShared (2),
each port will use its own bandwidth meter for this SAP. This value is not used
if ingressBandwidth is 0. If set to notAssigned(3), SAP bandwidth limit parameter
will not be effective, QoS bandwith settings needs to be configured.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.2.1.7 |
alaEServiceSapProfileRowStatusThe status of this table entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.2.1.8 |
alaEServiceSapProfileEgressBWThis object describes this limit of egress bandwidth for each UNI
of the SAP to which this profile is applied. If 0, no bandwidth limit
is applied. This number represents traffic in units of Megabits per
second. Note that all CVLAN that belong to this SAP will share this
aggregated limit.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.2.1.9 |
alaEServiceSapProfileCIRCommitted Information Rate - bandwidth values in bits per second.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.2.1.10 |
alaEServiceSapProfileCBSCommitted Burst Size - bucket size in byte.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.2.1.11 |
alaEServiceSapProfilePIRPeak Information Rate - bandwidth values in bits per second.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.2.1.12 |
alaEServiceSapProfilePBSPeak Burst Size - bucket size in byte.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.2.1.13 |
alaEServiceUNIProfileTableA table that contains service profiles containing performance and control attributes.
An entry in this table is created when a new service profile is defined. SEQUENCE OF AlaEServiceUNIProfileEntry .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.3 |
alaEServiceUNIProfileEntryA E-Service Service Profile entry. AlaEServiceUNIProfileEntry .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.3.1 |
alaEServiceUNIProfileIDA label given to uniquely identify this profile. Must be at least one character long. DisplayString .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.3.1.1 |
alaEServiceUNIProfileStpBpduTreatmentThis object describes the behavior of the bridge in regards to the spanning tree
protocol BPDU received on the UNI. Tunnel (1) enables the PDU to be tunneled across
the provider network. Discard (2) causes the PDU of the protocol to be discarded
and not enter the provider network. Peer (3) means that on this port the bridge
is to participate in the protocol. Mac-Tunnel (4) enables mac-tunnelling.rw AlaEServiceUNIProfileProtocolTreatment .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.3.1.2 |
alaEServiceUNIProfile8021xTreatmentThis object describes the behavior of the bridge in regards to the IEEE 802.1x PDU
frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across
the provider network. Discard (2) causes the PDU of the protocol to be discarded
and not enter the provider network. Peer (3) means that on this port the bridge
is to participate in the protocol. Mac-Tunnel (4) enables mac-tunnelling.rw AlaEServiceUNIProfileProtocolTreatment .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.3.1.3 |
alaEServiceUNIProfile8021ABTreatmentThis object describes the behavior of the bridge in regards to the IEEE 802.1AB PDU
frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across
the provider network. Discard (2) causes the PDU of the protocol to be discarded
and not enter the provider network. Peer (3) means that on this port the bridge
is to participate in the protocol. Mac-Tunnel (4) enables mac-tunnelling.rw AlaEServiceUNIProfileProtocolTreatment .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.3.1.4 |
alaEServiceUNIProfile8023adTreatmentThis object describes the behavior of the bridge in regards to the IEEE 802.1ad PDU
frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across
the provider network. Discard (2) causes the PDU of the protocol to be discarded
and not enter the provider network. Peer (3) means that on this port the bridge
is to participate in the protocol. Mac-Tunnel (4) enables mac-tunnelling.rw AlaEServiceUNIProfileProtocolTreatment .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.3.1.5 |
alaEServiceUNIProfileGvrpTreatmentThis object describes the behavior of the bridge in regards to the GVRP PDU
frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across
the provider network. Discard (2) causes the PDU of the protocol to be discarded
and not enter the provider network. Peer (3) means that on this port the bridge
is to participate in the protocol. Mac-Tunnel (4) enables mac-tunnelling.rw AlaEServiceUNIProfileProtocolTreatment .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.3.1.6 |
alaEServiceUNIProfileAmapTreatmentThis object describes the behavior of the bridge in regards to the Alcatel
propietary AMAP PDU frames received on the UNI. Tunnel (1) enables the PDU to
be tunneled across the provider network. Discard (2) causes the PDU of the
protocol to be discarded and not enter the provider network. Peer (3) means
that on this port the bridge is to participate in the protocol. Mac-Tunnel (4) enables mac-tunnelling.
Currenly mac-tunnel is not supportedrw AlaEServiceUNIProfileProtocolTreatment .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.3.1.7 |
alaEServiceUNIProfileRowStatusThe status of this table entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.3.1.8 |
alaEServiceUNIProfileMvrpTreatmentThis object describes the behavior of the bridge in regards to the MVRP PDU
frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across
the provider network. Discard (2) causes the PDU of the protocol to be discarded
and not enter the provider network. Peer (3) means that on this port the bridge
is to participate in the protocol. Currently peer is not supported for MVRPrw AlaEServiceUNIProfileProtocolTreatment .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.3.1.9 |
alaEServiceUNIProfileTunnelMacThis object specifies the tunnel mac used to tunnel L2 protocol to NNI portsrw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.3.1.10 |
alaEServiceUNIProfileLacpMarkerTreatmentThis object describes the behavior of the bridge in regards to the LACP MARKER PDU
frames received on the UNI. Tunnel (1) enables the PDU to
be tunneled across the provider network. Discard (2) causes the PDU of the
protocol to be discarded and not enter the provider network. Peer (3) means
that on this port the bridge is to participate in the protocol. Mac-Tunnel (4) enables mac-tunnelling.rw AlaEServiceUNIProfileProtocolTreatment .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.3.1.11 |
alaEServiceUNIProfileOamTreatmentThis object describes the behavior of the bridge in regards to the OAM PDU
frames received on the UNI. Tunnel (1) enables the PDU to
be tunneled across the provider network. Discard (2) causes the PDU of the
protocol to be discarded and not enter the provider network. Peer (3) means
that on this port the bridge is to participate in the protocol. Mac-Tunnel (4) enables mac-tunnelling.rw AlaEServiceUNIProfileProtocolTreatment .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.3.1.12 |
alaEServiceUNIProfileCiscoPagpTreatmentThis object describes the behavior of the bridge in regards to the PAGP PDU
frames received on the UNI. Tunnel (1) enables the PDU to
be tunneled across the provider network. Discard (2) causes the PDU of the
protocol to be discarded and not enter the provider network. Peer (3) means
that on this port the bridge is to participate in the protocol. Mac-Tunnel (4) enables mac-tunnelling.
Currently peer is not supportedrw AlaEServiceUNIProfileProtocolTreatment .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.3.1.13 |
alaEServiceUNIProfileCiscoUdldTreatmentThis object describes the behavior of the bridge in regards to the UDLD PDU
frames received on the UNI. Tunnel (1) enables the PDU to
be tunneled across the provider network. Discard (2) causes the PDU of the
protocol to be discarded and not enter the provider network. Peer (3) means
that on this port the bridge is to participate in the protocol. Mac-Tunnel (4) enables mac-tunnelling.rw AlaEServiceUNIProfileProtocolTreatment .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.3.1.14 |
alaEServiceUNIProfileCiscoCdpTreatmentThis object describes the behavior of the bridge in regards to the CDC PDU
frames received on the UNI. Tunnel (1) enables the PDU to
be tunneled across the provider network. Discard (2) causes the PDU of the
protocol to be discarded and not enter the provider network. Peer (3) means
that on this port the bridge is to participate in the protocol. Mac-Tunnel (4) enables mac-tunnelling.
Currently peer is not supportedrw AlaEServiceUNIProfileProtocolTreatment .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.3.1.15 |
alaEServiceUNIProfileCiscoVtpTreatmentThis object describes the behavior of the bridge in regards to the VTP PDU
frames received on the UNI. Tunnel (1) enables the PDU to
be tunneled across the provider network. Discard (2) causes the PDU of the
protocol to be discarded and not enter the provider network. Peer (3) means
that on this port the bridge is to participate in the protocol. Mac-Tunnel (4) enables mac-tunnelling.
Currently peer is not supportedrw AlaEServiceUNIProfileProtocolTreatment .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.3.1.16 |
alaEServiceUNIProfileCiscoDtpTreatmentThis object describes the behavior of the bridge in regards to the DTP PDU
frames received on the UNI. Tunnel (1) enables the PDU to
be tunneled across the provider network. Discard (2) causes the PDU of the
protocol to be discarded and not enter the provider network. Peer (3) means
that on this port the bridge is to participate in the protocol. Mac-Tunnel (4) enables mac-tunnelling.
Currently peer not supportedrw AlaEServiceUNIProfileProtocolTreatment .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.3.1.17 |
alaEServiceUNIProfileCiscoPvstTreatmentThis object describes the behavior of the bridge in regards to the PVST PDU
frames received on the UNI. Tunnel (1) enables the PDU to
be tunneled across the provider network. Discard (2) causes the PDU of the
protocol to be discarded and not enter the provider network. Peer (3) means
that on this port the bridge is to participate in the protocol. Mac-Tunnel (4) enables mac-tunnelling.
Currently peer not supportedrw AlaEServiceUNIProfileProtocolTreatment .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.3.1.18 |
alaEServiceUNIProfileCiscoVlanTreatmentThis object describes the behavior of the bridge in regards to the VLAN PDU
frames received on the UNI. Tunnel (1) enables the PDU to
be tunneled across the provider network. Discard (2) causes the PDU of the
protocol to be discarded and not enter the provider network. Peer (3) means
that on this port the bridge is to participate in the protocol. Mac-Tunnel (4) enables mac-tunnelling.
Currently peer not supportedrw AlaEServiceUNIProfileProtocolTreatment .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.3.1.19 |
alaEServiceUNIProfileCiscoUplinkTreatmentThis object describes the behavior of the bridge in regards to the UPLINK PDU
frames received on the UNI. Tunnel (1) enables the PDU to
be tunneled across the provider network. Discard (2) causes the PDU of the
protocol to be discarded and not enter the provider network. Peer (3) means
that on this port the bridge is to participate in the protocol. Mac-Tunnel(4) enables mac-tunnelling.
Currently peer not supported.rw AlaEServiceUNIProfileProtocolTreatment .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.3.1.20 |
alaEServiceTableA table that contains the services and their assigned SVLAN for the
E-Service feature. SEQUENCE OF AlaEServiceEntry .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.4 |
alaEServiceEntryThe svlan/ipmvlan-port association. AlaEServiceEntry .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.4.1 |
alaEServiceIDA label given to uniquely identify this Service. Must be at least one character long. DisplayString .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.4.1.1 |
alaEServiceSVLANThe SVLAN number of the SVLAN chosen to the be transport for this service.rw INTEGER .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.4.1.2 |
alaEServiceVlanTypeThe type of the vlan this service is going to attach to. When creating the service,
the type should match the vlanId specified in the request.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.4.1.3 |
alaEServiceRowStatusThe status of this table entry. The supported value for set are
createAndGo (4) and destroy(6), to add or remove a service. When
creating or deleting the service, the user needs to provide both
the svlan and the vlantype objects.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.4.1.4 |
alaEServiceStatGreenCountCounter for the number of packets/bytes being Green compliant (i.e. in case of srTCM
and trTCM, packet is CIR/CBS compliant).ro Counter64 .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.4.1.5 |
alaEServiceStatYellowCountCounter for the number of packets/bytes being Yellow compliant (i.e. in case of srTCM
and trTCM, packet is PIR/PBS compliant).ro Counter64 .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.4.1.6 |
alaEServiceStatRedCountCounter for the number of packets/bytes being Red compliant (i.e. in case of srTCM
and trTCM, packet is neither CIR/CBS nor PIR/PBS compliant).ro Counter64 .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.4.1.7 |
alaEServiceSapTableA table that contains the Service Access Points (Sap) listed by ID.
This table is used to create, delete, and modify the SAP's profile SEQUENCE OF AlaEServiceSapEntry .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.5 |
alaEServiceSapEntryThe list of SAP. AlaEServiceSapEntry .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.5.1 |
alaEServiceSapIDA Number given to uniquely identify the SAP. Integer32 .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.5.1.1 |
alaEServiceSapServiceIDA label given to uniquely identify the Service this SAP is for. Must
be at least one character long.rw DisplayString .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.5.1.2 |
alaEServiceSapProfileThe string identifying the SAP Profile this sap is to use. If specified, must match an existing
SAP Profile.rw DisplayString .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.5.1.3 |
alaEServiceSapRowStatusThe status of this table entry. The supported value for set are
createAndGo (4) and destroy(6), to add or remove a sap. When
creating the sap, the user needs to provide the service name in
the same set request.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.5.1.4 |
alaEServiceSapCvlanTableA table that contains the Service Access Points (Sap) where the CVLANs are bound
to their service. SEQUENCE OF AlaEServiceSapCvlanEntry .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.6 |
alaEServiceSapCvlanEntryThe CVLAN to Sap binding. AlaEServiceSapCvlanEntry .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.6.1 |
alaEServiceSapCvlanSapIDA Number given to uniquely identify this SAP. Integer32 .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.6.1.1 |
alaEServiceSapCvlanCvlanThis object is the CVLAN ID that this binding is targeted at. The CVLAN ID
may be 0, which indicates an all or untagged only mapping type. INTEGER .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.6.1.2 |
alaEServiceSapCvlanMapTypeThis object is the mapping type that defines what CVLANs are mapped into this service.
Multiple mappings can be defined for CVLAN to service, however only one all (2) or
untaggedOnly (3) mapping entry can be created per UNI. A mapping type of Single (1)
denotes a specific CVLAN value to bind to the service. A mapping type of All (2)
denotes that all customer frames that do not map to any other SAP,
will be mapped into this service. A mapping type of Untagged (3) denotes that only
the untagged frames will be mapped into this service.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.6.1.3 |
alaEServiceSapCvlanRowStatusThe status of this table entry. The supported value for set are
createAndGo (4) and destroy(6), to add or remove a SAP.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.6.1.4 |
alaEServicePortTableA table that contains the ports used by the EService feature. Both UNI and NNI
are listed here. SEQUENCE OF AlaEServicePortEntry .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.7 |
alaEServicePortEntryThe list of ports being used by EService. AlaEServicePortEntry .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.7.1 |
alaEServicePortIDThe IfIndex of this UNI or NNI Port. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.7.1.1 |
alaEServicePortTypeThe type of port for Vlan Stacking operation. uni (1) represents a customer facing
port on which traffic may enter the E-Service. nni (2) respresents a provider network
port over which the E-Service may be connected.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.7.1.2 |
alaEServicePortVendorTpidhe TPID for this port if type is NNI. It is used for the incoming data
traffic parsing and it is substituted to the 802.1Q standard Tpid for
the outgoing data traffic. This is used for compatibility with other vendor
equipment. The default value is the standard value 0x8100.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.7.1.3 |
alaEServicePortLegacyStpBpduThe legacy STP BPDU treatment for this port if NNI. It defines the type of processing
applied to STP legacy BPDUs on network ports. Legacy BPDU refer to conventional/customer
BPDUs with MAC address 01:80:c2:00:00:00 and its processing on network ports can be
enabled/disabled by this object.By default the value is disabled i.e
provider MAC BPDU with MAC address 01:80:c2:00:00:08 would be processed at network ports.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.7.1.4 |
alaEServicePortLegacyGvrpPduThe legacy GVRP PDU treatment for this port if NNI. It defines the type of processing
applied to GVRP PDUs on network ports.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.7.1.5 |
alaEServicePortUniProfileThe label of an existing UNI profile that which contains various properties to be
applied to this port if UNI.rw DisplayString .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.7.1.6 |
alaEServicePortTransBridgingThe Transparent Bridging status for the nni Port.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.7.1.7 |
alaEServicePortLegacyMvrpPduThe legacy MVRP PDU treatment for this port if NNI. It defines the type of processing
applied to MVRP PDUs on network ports.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.7.1.8 |
alaEServiceSapUniTableA table that contains the UNI that are bound to each SAP for classifying
traffic into each EService. Not that writing to this table may create
a new UNI. SEQUENCE OF AlaEServiceSapUniEntry .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.8 |
alaEServiceSapUniEntryThe list of SAP-UNI bindings being used by EService. AlaEServiceSapUniEntry .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.8.1 |
alaEServiceSapUniSapThe SAP ID that is configured onto this port. Integer32 .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.8.1.1 |
alaEServiceSapUniUniThe IfIndex of this UNI Port. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.8.1.2 |
alaEServiceSapUniRowStatusThe status of this table entry. The supported value for set are
createAndGo (4) and destroy(6), to add or remove a bindingrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.8.1.3 |
alaEServiceNniSvlanTableA table that contains the SVLANs bound to each NNI for use by the
EService feature. SEQUENCE OF AlaEServiceNniSvlanEntry .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.9 |
alaEServiceNniSvlanEntryThe list of NNI-SVLAN bindings being used by EService. AlaEServiceNniSvlanEntry .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.9.1 |
alaEServiceNniSvlanNniThe IfIndex of this NNI Port. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.9.1.1 |
alaEServiceNniSvlanSvlanThe SVLAN bound to this port. SVLAN cannot be 1. INTEGER .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.9.1.2 |
alaEServiceNniSvlanRowStatusThe status of this table entry. The supported value for set are
createAndGo (4) and destroy(6), to add or remove a bindingrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.9.1.3 |
alaEServiceNniSvlanVpaTypeThe object is used to specify whether the VPA state is to
be controlled by an ERP or a STP. By default VPA state is
controlled by STP.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.9.1.4 |
alaEServiceSapCvlanPortStatTableA statistics table that contains the counters per SAP. SEQUENCE OF AlaEServiceSapCvlanPortStatEntry .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.10 |
alaEServiceSapCvlanPortStatEntryA E-Service Statistics Entry. AlaEServiceSapCvlanPortStatEntry .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.10.1 |
alaEServiceSapCvlanPortStatSapIDA Number given to uniquely identify the SAP. Integer32 .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.10.1.1 |
alaEServiceSapCvlanPortStatCvlanIDThis object is the CVLAN ID that this binding is targeted at. The CVLAN ID
may be 0, which indicates an all or untagged only mapping type. INTEGER .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.10.1.2 |
alaEServiceSapCvlanPortStatPortIDThe IfIndex of this UNI Port. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.10.1.3 |
alaEServiceSapCvlanPortStatGreenCountCounter for the number of packets/bytes being Green compliant (i.e. in case of srTCM
and trTCM, packet is CIR/CBS compliant) per UNI port, per CVLAN. This object is applicable
only when ingress bandwidth is not shared across SAP ports and CVLANs.ro Counter64 .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.10.1.4 |
alaEServiceSapCvlanPortStatYellowCountCounter for the number of packets/bytes being Yellow compliant (i.e. in case of srTCM
and trTCM, packet is PIR/PBS compliant) per UNI port, per CVLAN. This object is applicable
only when ingress bandwidth is not shared across SAP ports and CVLANs.ro Counter64 .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.10.1.5 |
alaEServiceSapCvlanPortStatRedCountCounter for the number of packets/bytes being Red compliant (i.e. in case of srTCM
and trTCM, packet is neither CIR/CBS nor PIR/PBS compliant) per UNI port, per CVLAN.
This object is applicable only when ingress bandwidth is not shared across SAP
ports and CVLANs.ro Counter64 .1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.10.1.6 |
alcatelIND1EServiceMIBConformanceBranch For E-Service Conformance Information. OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.50.1.2 |
alcatelIND1EServiceMIBGroupsBranch For E-Service Units Of Conformance. OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.50.1.2.1 |
alcatelIND1EServiceMIBCompliancesBranch For E-Service Compliance Statements. OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.50.1.2.2 |