Home/Catalog/WWP-LEOS-MULTICAST-FILTER-MIB

WWP-LEOS-MULTICAST-FILTER-MIB

AI MIB Summary

The WWP-LEOS-MULTICAST-FILTER-MIB manages multicast filtering policies and state variables on WWP LEOS network devices, enabling the monitoring and configuration of ingress/egress multicast group membership and filter rules.

This MIB specifies the managed objects for Multicast filter specific to the WWP Products.
Main OID:
wwpLeosMcastFilterMIB.1.3.6.1.4.1.6141.2.60.7
96
Objects
Active
Status
3
Dependencies

Imported Objects

Objects

96 total
Object Name
wwpLeosMcastFilterMIBThis MIB specifies the managed objects for Multicast filter specific to the WWP Products.
MODULE-IDENTITY
.1.3.6.1.4.1.6141.2.60.7
wwpLeosMcastFilterMIBObjects
OBJECT IDENTIFIER
.1.3.6.1.4.1.6141.2.60.7.1
wwpLeosMcastFilterConfig
OBJECT IDENTIFIER
.1.3.6.1.4.1.6141.2.60.7.1.1
wwpLeosMcastConfigStateSetting this object will enable or disable multicast globally.rw
Enumeration
.1.3.6.1.4.1.6141.2.60.7.1.1.1
wwpLeosMcastFilterActivationTableThe (conceptual) table listing the vlans on which the multicast filter can be applied. This table is used to create and delete entries in the multicast table and also to administratively enable/disable. To configure the IGMP Snooping on this VLAN use table wwpLeosMcastIgmpSnoopTable after creating entry in this (wwpLeosMcastFilterActivationTable) table.
SEQUENCE OF WwpLeosMcastFilterActivationEntry
.1.3.6.1.4.1.6141.2.60.7.1.1.2
wwpLeosMcastFilterActivationEntryAn entry (conceptual row) in the wwpLeosMcastFilterActivationTable.
WwpLeosMcastFilterActivationEntry
.1.3.6.1.4.1.6141.2.60.7.1.1.2.1
wwpLeosMcastVlanIdThe VLAN for which this multicast filter can be enabled/disabled.ro
VlanId
.1.3.6.1.4.1.6141.2.60.7.1.1.2.1.1
wwpLeosMcastFilterAdminStateSetting this object to enable will enable multicast on then given VLAN.rw
Enumeration
.1.3.6.1.4.1.6141.2.60.7.1.1.2.1.2
wwpLeosMcastFilterOperStateThe object represents the operational state of multicast on the given VLAN.ro
Enumeration
.1.3.6.1.4.1.6141.2.60.7.1.1.2.1.3
wwpLeosMcastFilterStateSetting this object to createandgo(4) will create an entry in the multicast table for the given VLAN and will enable multicast on that VLAN. Setting this object to destroy will delete the entry from the multicast table.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.6141.2.60.7.1.1.2.1.4
wwpLeosMcastFilterServerPortTableThe (conceptual) table listing the authorized server ports.
SEQUENCE OF WwpLeosMcastFilterServerPortEntry
.1.3.6.1.4.1.6141.2.60.7.1.1.3
wwpLeosMcastFilterServerPortEntryAn entry (conceptual row) in the wwpLeosMcastFilterServerPortTable.
WwpLeosMcastFilterServerPortEntry
.1.3.6.1.4.1.6141.2.60.7.1.1.3.1
wwpLeosMcastServerPortIdThe server port from which the IGMP query messages can be received, and joins/leaves messages can be sent.ro
Integer32
.1.3.6.1.4.1.6141.2.60.7.1.1.3.1.1
wwpLeosMcastServerPortStatusThis object is used to add/delete server ports from the list of authorized server ports. To add a port to the authorized server port list, a user must set this object to 'createAndGo'.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.6141.2.60.7.1.1.3.1.2
wwpLeosMcastIgmpSnoopTableThe (conceptual) table listing the configuration parameters for the IGMP snooping.
SEQUENCE OF WwpLeosMcastIgmpSnoopEntry
.1.3.6.1.4.1.6141.2.60.7.1.1.4
wwpLeosMcastIgmpSnoopEntryAn entry (conceptual row) in the wwpLeosMcastIgmpSnoopTable.
WwpLeosMcastIgmpSnoopEntry
.1.3.6.1.4.1.6141.2.60.7.1.1.4.1
wwpLeosMcastIgmpSnoopEnableFor LEOS (4.x) IGMP snooping can be enabled on this VLAN by setting this object to 'true'. The Management station should define the router IP address range and the list of server ports before snooping is enabled. SAOS (6.x) does not support setting IGMP snooping per VLAN. Instead it should be enabled globally using the wwpLeosMcastSnoopState MIB objectrw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.6141.2.60.7.1.1.4.1.1
wwpLeosMcastIgmpSnoopRobustnessThe number of replies to send for each multicast group.rw
Integer32
.1.3.6.1.4.1.6141.2.60.7.1.1.4.1.2
wwpLeosMcastIgmpSnoopProxyQueryIntervalThe interval period between each general query sent to the router. This parameter specifies how often to repeat the group specific query. Default will be 125 seconds. Note that the actual rate may be slower when the switch becomes busy, so this parameter should be thought of as a minimum time interval.rw
Integer32
.1.3.6.1.4.1.6141.2.60.7.1.1.4.1.3
wwpLeosMcastIgmpSnoopProxyQueryReplyTmoThe amount of time to receive a membership report after a query message was sent. This value goes directly into the query packet.rw
Integer32
.1.3.6.1.4.1.6141.2.60.7.1.1.4.1.4
wwpLeosMcastIgmpSnoopProxyQueryDelayThe amount of time to wait before sending the next group specific query downstream. General queries are sent one port at a time.rw
Integer32
.1.3.6.1.4.1.6141.2.60.7.1.1.4.1.5
wwpLeosMcastIgmpSnoopLingerTmoThis value specifies the amount of time that a multicast filter will be in place after the last host has left. In essence it configures how long to filter the stream after all the hosts have left the group. This can tune the system as to how long the router has to remove the stream from the subnet. The minimum value is 1 second, with no maximum value.rw
Integer32
.1.3.6.1.4.1.6141.2.60.7.1.1.4.1.6
wwpLeosMcastIgmpQueryEngineStateSetting this object to disable will enable query engine on a given VLAN. Setting it to enable will enable it.rw
Enumeration
.1.3.6.1.4.1.6141.2.60.7.1.1.4.1.7
wwpLeosMcastIgmpProxyQuerySrcIpSetting this object will set the source ip address for the VLAN.rw
IpAddress
.1.3.6.1.4.1.6141.2.60.7.1.1.4.1.8
wwpLeosMcastIgmpRouterQueryIntervalSetting this object will set the router query interval for given VLAN.rw
Integer32
.1.3.6.1.4.1.6141.2.60.7.1.1.4.1.9
wwpLeosMcastIgmpMinResponseTimeSetting this object will set the minimum response time for given VLAN.rw
Integer32
.1.3.6.1.4.1.6141.2.60.7.1.1.4.1.10
wwpLeosMcastIgmpDefaultRouterPortSetting this object will set the default router port for given VLAN.rw
Integer32
.1.3.6.1.4.1.6141.2.60.7.1.1.4.1.11
wwpLeosMcastIgmpInquisitiveLeaveStateSetting this object will set the IGMP inquisitive leave state for given VLAN.rw
Enumeration
.1.3.6.1.4.1.6141.2.60.7.1.1.4.1.12
wwpLeosMcastIgmpLastMemberQueryIntervalSetting this object will set the last membership query interval for given VLAN.rw
Integer32
.1.3.6.1.4.1.6141.2.60.7.1.1.4.1.13
wwpLeosMcastIgmpPrioritySetting this object will set the priority if IGMP packets for this VLAN.rw
Integer32
.1.3.6.1.4.1.6141.2.60.7.1.1.4.1.14
wwpLeosMcastIgmpSnoopRouterRangeStartIpAddrThe first IP Address of the router IP Address range.rw
IpAddress
.1.3.6.1.4.1.6141.2.60.7.1.1.4.1.15
wwpLeosMcastIgmpSnoopRouterRangeEndIpAddrThe last IP Address of the router IP Address range. When range is undefined, all leave/join messages will be forwarded to the router even when the multicast stream does not originate from the router. If the range is defined, leave/join messages will be filtered. The default value for this object should be equal to the value of wwpLeosMcastIgmpSnoopRouterRangeStartIpAddr.rw
IpAddress
.1.3.6.1.4.1.6141.2.60.7.1.1.4.1.16
wwpLeosMcastIgmpSnoopActiveLingerTimeoutThe object specifies the active linger timeout in seconds.rw
Integer32
.1.3.6.1.4.1.6141.2.60.7.1.1.4.1.17
wwpLeosMcastIgmpSnoopServerTopologyThe object specifies the server topology.rw
Enumeration
.1.3.6.1.4.1.6141.2.60.7.1.1.4.1.18
wwpLeosMcastIgmpSnoopRapidRecoveryModeSpecifies whether the rapid recovery mode is set to on or off. If this object is set to ON then device will generate and accept query packets with src IP = 0 else in the OFF state, it would not.rw
Enumeration
.1.3.6.1.4.1.6141.2.60.7.1.1.4.1.19
wwpLeosMcastChannelStreamTableThe (conceptual) table listing the configuration parameters for the multicast channel stream.
SEQUENCE OF WwpLeosMcastChannelStreamEntry
.1.3.6.1.4.1.6141.2.60.7.1.1.5
wwpLeosMcastChannelStreamEntryAn entry (conceptual row) in the wwpLeosMcastChannelStreamTable.
WwpLeosMcastChannelStreamEntry
.1.3.6.1.4.1.6141.2.60.7.1.1.5.1
wwpLeosMcastChanelStreamStartGroupAddrThe first IP Address of the multicast IP Address range.ro
IpAddress
.1.3.6.1.4.1.6141.2.60.7.1.1.5.1.1
wwpLeosMcastChanelStreamEndGroupAddrThe last IP Address of the multicast IP address range. If range does not need to be specified then do not set this value.rw
IpAddress
.1.3.6.1.4.1.6141.2.60.7.1.1.5.1.2
wwpLeosMcastChannelStreamStatusThis object is used to add/delete multicast groups to the channel stream. To add a multicast group to the channel stream, a user must set this object to 'createAndGo'. Device will not allow to create entry unless 'wwpLeosMcastChanelStreamStartGroupAddr' is specified. If range needs to be specified then set 'wwpLeosMcastChanelStreamEndGroupAddr' with the desired group address. If device cannot create entry for any of the IP addresses within the range then no entry will be created and an error will be returned.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.6141.2.60.7.1.1.5.1.3
wwpLeosMcastFilterConfigTableThe (conceptual) table listing the vlans on which the UPF can be applied.
SEQUENCE OF WwpLeosMcastFilterConfigEntry
.1.3.6.1.4.1.6141.2.60.7.1.1.6
wwpLeosMcastFilterConfigEntryAn entry (conceptual row) in the wwpLeosMcastFilterConfigTable.
WwpLeosMcastFilterConfigEntry
.1.3.6.1.4.1.6141.2.60.7.1.1.6.1
wwpLeosMcastFilterUPFActivateUPF can be enabled on this VLAN by setting this object to 'true'.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.6141.2.60.7.1.1.6.1.1
wwpLeosMcastUnresolvedActionSetting this object to 'flood' will cause the device to flood all the unresolved messages to all the ports in the VLAN. Setting this object to 'drop' will cause the device to drop all the unresolved messages. If an IGMP join is received with a matching multicast group address, the multicast stream will forward to the corresponding port.rw
Enumeration
.1.3.6.1.4.1.6141.2.60.7.1.1.6.1.2
wwpLeosMcastFilterWKMFLocalActivateSetting the object to flood will enable flooding of local WKMF on a VLAN. Setting the object to drop will enable dropping of local WKMF on a VLAN. Multicast address belonging to this object is 224.0.0.x.rw
Enumeration
.1.3.6.1.4.1.6141.2.60.7.1.1.6.1.3
wwpLeosMcastFilterWKMFInternetActivateSetting the object to flood will enable flooding of internet WKMF on a VLAN. Setting the object to drop will enable dropping of internet WKMF on a VLAN. Multicast address belonging to this object is 224.0.1.x.rw
Enumeration
.1.3.6.1.4.1.6141.2.60.7.1.1.6.1.4
wwpLeosMcastFilterWKMFAdhocActivateSetting the object to flood will enable flooding of adhoc WKMF on a VLAN. Setting the object to drop will enable dropping of adhoc WKMF on a VLAN. Multicast address belonging to this object is 224.0.2.x to 224.0.255.x.rw
Enumeration
.1.3.6.1.4.1.6141.2.60.7.1.1.6.1.5
wwpLeosMcastFilterWKMFStMulticastActivateSetting the object to flood will enable flooding of st-multicast WKMF on a VLAN. Setting the object to drop will enable dropping of st-multicast WKMF on a VLAN. Multicast address belonging to this object is 224.1.x.x.rw
Enumeration
.1.3.6.1.4.1.6141.2.60.7.1.1.6.1.6
wwpLeosMcastFilterWKMFSdpSapActivateSetting the object to flood will enable flooding of sdp-sap WKMF on a VLAN. Setting the object to drop will enable dropping of sdp-sap WKMF on a VLAN. Multicast address belonging to this object is 224.2.x.x.rw
Enumeration
.1.3.6.1.4.1.6141.2.60.7.1.1.6.1.7
wwpLeosMcastChannelStreamExPortMemTableThe (conceptual) table listing the excluded port list per VLAN for channel stream.
SEQUENCE OF WwpLeosMcastChannelStreamExPortMemEntry
.1.3.6.1.4.1.6141.2.60.7.1.1.7
wwpLeosMcastChannelStreamExPortMemEntryAn entry (conceptual row) in the wwpLeosMcastChannelStreamExPortMemTable.
WwpLeosMcastChannelStreamExPortMemEntry
.1.3.6.1.4.1.6141.2.60.7.1.1.7.1
wwpLeosMcastChannelStreamExPortIdThe port num to be excluded from channel stream.ro
Integer32
.1.3.6.1.4.1.6141.2.60.7.1.1.7.1.1
wwpLeosMcastChannelStreamExPortMemStatusSetting this object to createAndGo will add wwpLeosMcastVlanId and wwpLeosMcastChannelStreamExPortId in the excluded port list of channel stream. Setting this to destroy will remove the wwpLeosMcastVlanId, wwpLeosMcastChannelStreamExPortId membership from excluded port list.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.6141.2.60.7.1.1.7.1.2
wwpLeosMcastSnoopStateSetting this object will enable or disable IGMP Snooping globally on SAOS (6.x). LEOS (4.x) does not support setting IGMP snooping at a global level. It should be enabled on a per VLAN bases using the wwpLeosMcastIgmpSnoopEnable MIB objectrw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.6141.2.60.7.1.1.8
wwpLeosMcastGlobalStatsClearSetting this object to clear will clear the statistics for all the Multicast-Service filter entries. We cannot set the object to none. It is for display purpose only.rw
Enumeration
.1.3.6.1.4.1.6141.2.60.7.1.1.10
wwpLeosMcastFilterStatus
OBJECT IDENTIFIER
.1.3.6.1.4.1.6141.2.60.7.1.2
wwpLeosMcastGroupTableThe (conceptual) table listing all the multicast groups.
SEQUENCE OF WwpLeosMcastGroupEntry
.1.3.6.1.4.1.6141.2.60.7.1.2.1
wwpLeosMcastGroupEntryAn entry (conceptual row) in the wwpLeosMcastGroupTable.
WwpLeosMcastGroupEntry
.1.3.6.1.4.1.6141.2.60.7.1.2.1.1
wwpLeosMcastGroupAddrThe multicast group IP address.ro
IpAddress
.1.3.6.1.4.1.6141.2.60.7.1.2.1.1.1
wwpLeosMcastStateThe current state of the multicast stream.ro
Enumeration
.1.3.6.1.4.1.6141.2.60.7.1.2.1.1.2
wwpLeosMcastTypeThe type of the multicast stream.ro
Enumeration
.1.3.6.1.4.1.6141.2.60.7.1.2.1.1.3
wwpLeosMcastSourceThe source for this multicast stream.ro
Enumeration
.1.3.6.1.4.1.6141.2.60.7.1.2.1.1.4
wwpLeosMcastMemberCountThe number of ports that joined the group.ro
Counter32
.1.3.6.1.4.1.6141.2.60.7.1.2.1.1.5
wwpLeosMcastGroupMemberTableThe (conceptual) table listing all the port members of the multicast groups.
SEQUENCE OF WwpLeosMcastGroupMemberEntry
.1.3.6.1.4.1.6141.2.60.7.1.2.2
wwpLeosMcastGroupMemberEntryAn entry (conceptual row) in the wwpLeosMcastGroupMemberTable.
WwpLeosMcastGroupMemberEntry
.1.3.6.1.4.1.6141.2.60.7.1.2.2.1
wwpLeosMcastPortIdThe router port from which the IGMP query messages are received, and joins/leaves messages are sent.ro
Integer32
.1.3.6.1.4.1.6141.2.60.7.1.2.2.1.1
wwpLeosMcastPortTagIdThe Virtual Lan Tag Id used by the port on this Virtual Lan. If the switch is being used as a traditional Layer 2 device, then the value of this object should be same as wwpLeosMcastVlanId.ro
Integer32
.1.3.6.1.4.1.6141.2.60.7.1.2.2.1.2
wwpLeosMcastFilterStats
OBJECT IDENTIFIER
.1.3.6.1.4.1.6141.2.60.7.1.3
wwpLeosMcastFilterStatsTableThe (conceptual) table listing the multicast statistics.
SEQUENCE OF WwpLeosMcastFilterStatsEntry
.1.3.6.1.4.1.6141.2.60.7.1.3.1
wwpLeosMcastFilterStatsEntryAn entry (conceptual row) in the wwpLeosMcastFilterServerTable.
WwpLeosMcastFilterStatsEntry
.1.3.6.1.4.1.6141.2.60.7.1.3.1.1
wwpLeosMcastStaticGrpCountThe total number of static multicast groups.ro
Integer32
.1.3.6.1.4.1.6141.2.60.7.1.3.1.1.1
wwpLeosMcastDynamicGrpCountThe total number of dynamic mcast groups.ro
Integer32
.1.3.6.1.4.1.6141.2.60.7.1.3.1.1.2
wwpLeosMcastJoinMessagesThe total number of join messages received.ro
Counter32
.1.3.6.1.4.1.6141.2.60.7.1.3.1.1.3
wwpLeosMcastLeaveMessagesThe total number of leave messages received.ro
Counter32
.1.3.6.1.4.1.6141.2.60.7.1.3.1.1.4
wwpLeosMcastQueryMessagesThe total number of queries received.ro
Counter32
.1.3.6.1.4.1.6141.2.60.7.1.3.1.1.5
wwpLeosMcastQueryDiscardsThe total number of queries discarded.ro
Counter32
.1.3.6.1.4.1.6141.2.60.7.1.3.1.1.6
wwpLeosMcastQueryTimeoutsThe total number of timeouts waiting for the router to send query.ro
Counter32
.1.3.6.1.4.1.6141.2.60.7.1.3.1.1.7
wwpLeosMcastUnknownPktTypeThe total number of unknown (unknown type ) IGMP packets received.ro
Counter32
.1.3.6.1.4.1.6141.2.60.7.1.3.1.1.8
wwpLeosMcastRouterDiscardsThe total number of messages discarded by the router. This happens when join comes in from a router port.ro
Counter32
.1.3.6.1.4.1.6141.2.60.7.1.3.1.1.9
wwpLeosMcastHostDiscardsThe total number of messages discarded by the host. This happens when a join/leave comes in a port, but no router port is established.ro
Counter32
.1.3.6.1.4.1.6141.2.60.7.1.3.1.1.10
wwpLeosMcastBadChecksumThe total number of packets received with bad IP checksum.ro
Counter32
.1.3.6.1.4.1.6141.2.60.7.1.3.1.1.11
wwpLeosMcastL2L3MismatchThe total number of IGMP Layer2 / Layer 3 mismatch packets received.ro
Counter32
.1.3.6.1.4.1.6141.2.60.7.1.3.1.1.12
wwpLeosMcastTotalMembersThe total number of group members for all groups in the given VLAN.ro
Counter32
.1.3.6.1.4.1.6141.2.60.7.1.3.1.1.13
wwpLeosMcastLingerCountThe total number of groups in linger state.ro
Counter32
.1.3.6.1.4.1.6141.2.60.7.1.3.1.1.14
wwpLeosMcastRouterSrcMacAddrSpecifies the router's MAC address.ro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.6141.2.60.7.1.3.1.1.15
wwpLeosMcastRouterSrcIpAddrSpecifies the router's IP address.ro
IpAddress
.1.3.6.1.4.1.6141.2.60.7.1.3.1.1.16
wwpLeosMcastRouterPortIdSpecifies the port from where router queries are coming.ro
Integer32
.1.3.6.1.4.1.6141.2.60.7.1.3.1.1.17
wwpLeosMcastReportSendPortIdThe new value is the port number of the port where IGMP reports will be sent. Not always the same as the router port.ro
Integer32
.1.3.6.1.4.1.6141.2.60.7.1.3.1.1.18
wwpLeosMcastStatsClearSetting this object to clear will clear the statistics for only the associated VlanId. We cannot set this object to none, it is for display purpose only.rw
Enumeration
.1.3.6.1.4.1.6141.2.60.7.1.3.1.1.19
wwpLeosMcastStatsQuerySrcIpZeroDiscardSpecifies the number of Queries discarded with Zero source IP in themro
Counter32
.1.3.6.1.4.1.6141.2.60.7.1.3.1.1.20
wwpLeosMcastFilterMIBNotificationPrefix
OBJECT IDENTIFIER
.1.3.6.1.4.1.6141.2.60.7.2
wwpLeosMcastFilterMIBNotifications
OBJECT IDENTIFIER
.1.3.6.1.4.1.6141.2.60.7.2.0
wwpLeosMcastAddrOverlapNotificationA wwpLeosMcastAddrOverlapNotification is sent whenever several multicast IP addresses overlap (matches the same L2 address).
NOTIFICATION-TYPE
.1.3.6.1.4.1.6141.2.60.7.2.0.1
wwpLeosMcastFilterMIBConformance
OBJECT IDENTIFIER
.1.3.6.1.4.1.6141.2.60.7.3
wwpLeosMcastFilterMIBCompliances
OBJECT IDENTIFIER
.1.3.6.1.4.1.6141.2.60.7.3.1
wwpLeosMcastFilterMIBGroups
OBJECT IDENTIFIER
.1.3.6.1.4.1.6141.2.60.7.3.2
WWP-LEOS-MULTICAST-FILTER-MIB - SNMP MIB Reference | MIBs Explorer