Home/Catalog/WWP-LEOS-VPLS-MIB

WWP-LEOS-VPLS-MIB

Added a new object wwpLeosVplsVirtualSwitchEthEvplMemberServiceVlanTpid.
Main OID:
wwpLeosVplsMIB.1.3.6.1.4.1.6141.2.60.28
306
Objects
Active
Status
3
Dependencies

Imported Objects

SNMPv2-SMI
SNMPv2-TC
WWP-SMI

Objects

306 total
Object Name
wwpLeosVplsMIBAdded a new object wwpLeosVplsVirtualSwitchEthEvplMemberServiceVlanTpid.
MODULE-IDENTITY
.1.3.6.1.4.1.6141.2.60.28
wwpLeosVplsMIBObjects
OBJECT IDENTIFIER
.1.3.6.1.4.1.6141.2.60.28.1
wwpLeosVpls
OBJECT IDENTIFIER
.1.3.6.1.4.1.6141.2.60.28.1.1
wwpLeosVplsVirtualCircuitTableThe (conceptual) table listing the virtual circuit table. To create entry use SNMP, multiple set operation must be used because following MIB objects needs to be set while creating entry in the table. - wwpLeosVplsVirtualCircuitIndex - wwpLeosVplsVirtualCircuitProviderVlanId (should exist on the device) - wwpLeosVplsVirtualCircuitType - wwpLeosVplsVirtualCircuitStatus. - wwpLeosVplsVirtualCircuitName.deprecated
SEQUENCE OF WwpLeosVplsVirtualCircuitEntry
.1.3.6.1.4.1.6141.2.60.28.1.1.1
wwpLeosVplsVirtualCircuitEntryThe virtual circuit table entry index by wwpLeosVplsVirtualCircuitIndex.deprecated
WwpLeosVplsVirtualCircuitEntry
.1.3.6.1.4.1.6141.2.60.28.1.1.1.1
wwpLeosVplsVirtualCircuitIndexThis represents the virtual circuit index in the table. This number should be unique in the table.rodeprecated
INTEGER
.1.3.6.1.4.1.6141.2.60.28.1.1.1.1.1
wwpLeosVplsVirtualCircuitProviderVlanIdThis represents the provider vlan id associated with the virtual circuit for a given wwpLeosVplsVirtualCircuitIndex.rwdeprecated
VlanId
.1.3.6.1.4.1.6141.2.60.28.1.1.1.1.2
wwpLeosVplsVirtualCircuitTypeThis represents the type of virtual circuit associated with the given virtual circuit.rwdeprecated
Enumeration
.1.3.6.1.4.1.6141.2.60.28.1.1.1.1.3
wwpLeosVplsVirtualCircuitNameThis represents the name of the virtual circuit associated with the given virtual circuit.rwdeprecated
DisplayString
.1.3.6.1.4.1.6141.2.60.28.1.1.1.1.4
wwpLeosVplsVirtualCircuitIngressVcLabelThis represents the vc label to be used for given virtual circuit. This mib object can only be set for virtual circuit entries which has wwpLeosCircuitType = mpls.rwdeprecated
INTEGER
.1.3.6.1.4.1.6141.2.60.28.1.1.1.1.5
wwpLeosVplsVirtualCircuitEgressVcLabelThis represents the vc label to be used for given virtual circuit. This mib object can only be set for virtual circuit entries which has wwpLeosCircuitType = mpls.rwdeprecated
INTEGER
.1.3.6.1.4.1.6141.2.60.28.1.1.1.1.6
wwpLeosVplsVirtualCircuitTunnelIndxThis represents the tunnel associated with this virtual circuit. This mib object can only be set for virtual circuit entries which has wwpLeosCircuitType = mpls.rwdeprecated
INTEGER
.1.3.6.1.4.1.6141.2.60.28.1.1.1.1.7
wwpLeosVplsVirtualCircuitStatusSetting this object to 'createAndGo' will create the entry and by default will enable control frame and data frame tunnel . Setting this object to 'destroy' will delete the entry from the table for given vlan.rwdeprecated
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.6141.2.60.28.1.1.1.1.8
wwpLeosVplsVirtualSwitchTableThis table is used to manage virtual switch entries on the device.deprecated
SEQUENCE OF WwpLeosVplsVirtualSwitchEntry
.1.3.6.1.4.1.6141.2.60.28.1.1.5
wwpLeosVplsVirtualSwitchEntryThis entry corresponds to single entry in wwpLeosVplsVirtualSwitchTable table. To create an entry in the table following criteria must be met. - wwpLeosVplsVirtualSwitchIndx must be specified. - wwpLeosVplsVirtualSwitchStatus must be specified. - wwpLeosVplsVirtualSwitchType must be specified. - wwpLeosVplsVirtualSwitchName must be specifieddeprecated
WwpLeosVplsVirtualSwitchEntry
.1.3.6.1.4.1.6141.2.60.28.1.1.5.1
wwpLeosVplsVirtualSwitchIndxThis object specifies the virtual switch index which is used as unique index in the table.rodeprecated
INTEGER
.1.3.6.1.4.1.6141.2.60.28.1.1.5.1.1
wwpLeosVplsVirtualSwitchNameThis object specifies the virtual switch name. this object can only be specified at the time of creation and cannot be modified later.rwdeprecated
OCTET STRING
.1.3.6.1.4.1.6141.2.60.28.1.1.5.1.2
wwpLeosVplsVirtualSwitchPriVcThis object specifies the primary virtual circuit ID associated with this virtual switch. To unset it set this to 0.rwdeprecated
INTEGER
.1.3.6.1.4.1.6141.2.60.28.1.1.5.1.3
wwpLeosVplsVirtualSwitchSecVcThis object specifies the secondary virtual circuit ID associated with this virtual switch. To unset it set this to 0. This object is applicable if wwpLeosVplsVirtualSwitchType = mpls.rwdeprecated
INTEGER
.1.3.6.1.4.1.6141.2.60.28.1.1.5.1.4
wwpLeosVplsVirtualSwitchActiveVcThis object specifies the virtual circuit which is currently used by this virtual switch instance.rodeprecated
Enumeration
.1.3.6.1.4.1.6141.2.60.28.1.1.5.1.5
wwpLeosVplsVirtualSwitchEncapCosPolicyThis object specifies the ingress cos policy for given virtual switch.rwdeprecated
Enumeration
.1.3.6.1.4.1.6141.2.60.28.1.1.5.1.6
wwpLeosVplsVirtualSwitchEncapFixedDot1dPriThis object specifies the ingress fixed cos attributes for given virtual switch.rwdeprecated
INTEGER
.1.3.6.1.4.1.6141.2.60.28.1.1.5.1.7
wwpLeosVplsVirtualSwitchDecapCosPolicyThis object specifies the egress cos policy for given virtual switch.rwdeprecated
Enumeration
.1.3.6.1.4.1.6141.2.60.28.1.1.5.1.8
wwpLeosVplsVirtualSwitchDecapFixedDot1dPriThis object specifies the egress cos attributes for given virtual switch.rwdeprecated
INTEGER
.1.3.6.1.4.1.6141.2.60.28.1.1.5.1.9
wwpLeosVplsVirtualSwitchSubscriberVlanThis object specifies the subscriber vlan Id for given virtual switch.rwdeprecated
INTEGER
.1.3.6.1.4.1.6141.2.60.28.1.1.5.1.10
wwpLeosVplsVirtualSwitchCtrlProtocolTunnelStateThis object enables or disables control protocol tunneling for a given virtual switch.rwdeprecated
Enumeration
.1.3.6.1.4.1.6141.2.60.28.1.1.5.1.11
wwpLeosVplsVirtualSwitchTypeThis object specifies the type of virtual witch.rwdeprecated
Enumeration
.1.3.6.1.4.1.6141.2.60.28.1.1.5.1.12
wwpLeosVplsVirtualSwitchStatusThis object can be set to 'createAndGo' to create entry in the table. This object can be set to 'destroy' to delete entry in the table. Following objects must be set to valid values to create entry in the table.rwdeprecated
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.6141.2.60.28.1.1.5.1.13
wwpLeosVplsVirtualSwitchMemberTableThis table is used to create virtual switch membership entry.deprecated
SEQUENCE OF WwpLeosVplsVirtualSwitchMemberEntry
.1.3.6.1.4.1.6141.2.60.28.1.1.6
wwpLeosVplsVirtualSwitchMemberEntryThis entry corresponds to single entry in wwpLeosVplsVirtualSwitchMemberTable table.deprecated
WwpLeosVplsVirtualSwitchMemberEntry
.1.3.6.1.4.1.6141.2.60.28.1.1.6.1
wwpLeosVplsVirtualSwitchMemberPortIdThis object specifies the port id associated with wwpLeosVplsVirtualSwitchIndx.rodeprecated
INTEGER
.1.3.6.1.4.1.6141.2.60.28.1.1.6.1.1
wwpLeosVplsVirtualSwitchMemberStatusThis object can be set to 'createandgo' to add entry in the table. This object can be set to 'destroy' to delete entry in the table. Refer to description of table entry to see how to create entries in the table.rwdeprecated
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.6141.2.60.28.1.1.6.1.2
wwpLeosVplsSwitchCtrlProtocolTableThe (conceptual) table listing the l2 virtual switch control frame protocol status tunnel for a given Vpls.deprecated
SEQUENCE OF WwpLeosVplsSwitchCtrlProtocolEntry
.1.3.6.1.4.1.6141.2.60.28.1.1.7
wwpLeosVplsSwitchCtrlProtocolEntryThe layer 2 virtual switch control frame protocol tunnel entry for the Vpls.deprecated
WwpLeosVplsSwitchCtrlProtocolEntry
.1.3.6.1.4.1.6141.2.60.28.1.1.7.1
wwpLeosVplsSwitchCtrlProtocolNumThis object represent the list of protocols the device can support.rodeprecated
Enumeration
.1.3.6.1.4.1.6141.2.60.28.1.1.7.1.1
wwpLeosVplsSwitchCtrlTypeSetting this object to 'discard' will cause wwpLeosVplsSwitchCtrlProtocolNum frames arriving at the specified UNI to be discarded. Setting this to 'peer' will cause the wwpLeosVplsSwitchCtrlProtocolNum frame to be processed by the provider network and cause the provider network to behave as a peer. Setting this to 'tunnel' will cause the wwpLeosVplsSwitchCtrlProtocolNum frame to be tunneled.rwdeprecated
Enumeration
.1.3.6.1.4.1.6141.2.60.28.1.1.7.1.2
wwpLeosVplsSwitchReservedVlanTableThe (conceptual) table listing the reserved Vlans used for virtual switch.
SEQUENCE OF WwpLeosVplsSwitchReservedVlanEntry
.1.3.6.1.4.1.6141.2.60.28.1.1.8
wwpLeosVplsSwitchReservedVlanEntryThe entry to reserve vlans for vlan switch.
WwpLeosVplsSwitchReservedVlanEntry
.1.3.6.1.4.1.6141.2.60.28.1.1.8.1
wwpLeosVplsSwitchReservedVlanIdThis object is used to specify the vlan ID to be reserved for virtual switch. Reserved vlans are used when virtual switch is created.ro
INTEGER
.1.3.6.1.4.1.6141.2.60.28.1.1.8.1.1
wwpLeosVplsSwitchReservedVlanStatusSetting this object to 'createandgo' will reserve the vlan for virtual switch. Setting this object to 'destroy will no longer be reserved for virtual switch.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.6141.2.60.28.1.1.8.1.2
wwpLeosVplsGlobalAttrs
OBJECT IDENTIFIER
.1.3.6.1.4.1.6141.2.60.28.1.1.9
wwpLeosVplsTunnelFixedTTLThis object specifies the fixed TTL value for all tunnels.rw
INTEGER
.1.3.6.1.4.1.6141.2.60.28.1.1.9.1
wwpLeosVplsResolverTimeoutSetting this object will set the PE resolver timeout. This timeout value decides how frequently PE resolver will arp for the destination IP specified by wwpLeosVplsEncapTunnelDestAddr.rw
INTEGER
.1.3.6.1.4.1.6141.2.60.28.1.1.9.2
wwpLeosVplsStaticLabelRangeStartSetting this object will set the lowest label that can be assigned to static encap / decap tunnels or virtual circuits. Multiple set operation can be used to set both wwpLeosVplsStaticLabelRangeStart and wwpLeosVplsStaticLabelRangeEnd. wwpLeosVplsStaticLabelRangeStart must always be less than wwpLeosVplsStaticLabelRangeEnd. The value of 0 means label range is not available. Attempting to set this object to 0 will return COMMIT FAILED.rw
Unsigned32 (0 | 16..1048575)
.1.3.6.1.4.1.6141.2.60.28.1.1.9.3
wwpLeosVplsStaticLabelRangeEndSetting this object will set the maximum label that can be assigned to static encap / decap tunnels or virtual circuits. Multiple set operation can be used to set both wwpLeosVplsStaticLabelRangeStart and wwpLeosVplsStaticLabelRangeEnd. wwpLeosVplsStaticLabelRangeStart must always be less than wwpLeosVplsStaticLabelRangeEnd.The value of 0 means label range is not available. Attempting to set this object to 0 will return COMMIT FAILED.rw
Unsigned32 (0 | 16..1048575)
.1.3.6.1.4.1.6141.2.60.28.1.1.9.4
wwpLeosVplsDynamicLabelRangeStartSetting this object will set the lowest label that can be assigned to dynamic encap / decap tunnels or virtual circuits. Multiple set operation can be used to set both wwpLeosVplsDynamicLabelRangeStart and wwpLeosVplsDynamicLabelRangeEnd. wwpLeosVplsDynamicLabelRangeStart must always be less than wwpLeosVplsDynamicLabelRangeEnd.The value of 0 means label range is not available. Attempting to set this object to 0 will return COMMIT FAILED.rw
Unsigned32 (0 | 16..1048575)
.1.3.6.1.4.1.6141.2.60.28.1.1.9.5
wwpLeosVplsDynamicLabelRangeEndSetting this object will set the maximum label that will be assigned to encap tunnels or virtual circuits. Multiple set operation can be used to set both wwpLeosVplsDynamicLabelRangeStart and wwpLeosVplsDynamicLabelRangeEnd. wwpLeosVplsDynamicLabelRangeStart must always be less than wwpLeosVplsDynamicLabelRangeEnd. The value of 0 means label range is not available. Attempting to set this object to 0 will return COMMIT FAILED.rw
Unsigned32 (0 | 16..1048575)
.1.3.6.1.4.1.6141.2.60.28.1.1.9.6
wwpLeosVplsVirtualCircuitStatsClearSetting this object to clear will reset statistics for all virtual circuitsrw
Enumeration
.1.3.6.1.4.1.6141.2.60.28.1.1.9.7
wwpLeosVplsMplsPathTableMpls Path table used to represent the explicit path for RSVP tunnels.
SEQUENCE OF WwpLeosVplsMplsPathEntry
.1.3.6.1.4.1.6141.2.60.28.1.1.10
wwpLeosVplsMplsPathEntryEntry in the MPLS Path table.
WwpLeosVplsMplsPathEntry
.1.3.6.1.4.1.6141.2.60.28.1.1.10.1
wwpLeosVplsMplsPathIndexThis mib specifies the unique entry in the Mpls path table. This is the primary index into this table identifying a particular explicit route objectro
INTEGER
.1.3.6.1.4.1.6141.2.60.28.1.1.10.1.1
wwpLeosVplsMplsPathNameThis mib specifies the name for the path.rw
DisplayString
.1.3.6.1.4.1.6141.2.60.28.1.1.10.1.2
wwpLeosVplsMplsPathRowStatusUsed to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. To delete a row in this table, a manager must set this object to 'destroy'. If the entry exists, it will be displayed as 'active'.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.6141.2.60.28.1.1.10.1.3
wwpLeosVplsMplsPathMemberTableTable specifies the list of IP addresses (Hops) to get to the destination PE.
SEQUENCE OF WwpLeosVplsMplsPathMemberEntry
.1.3.6.1.4.1.6141.2.60.28.1.1.11
wwpLeosVplsMplsPathMemberEntryRepresents the entry in the table.
WwpLeosVplsMplsPathMemberEntry
.1.3.6.1.4.1.6141.2.60.28.1.1.11.1
wwpLeosVplsMplsPathOptionIndexSecondary index into this table identifying a particular group of hops representing a particular configured path. This is otherwise known as a path option.ro
INTEGER
.1.3.6.1.4.1.6141.2.60.28.1.1.11.1.1
wwpLeosVplsMplsPathMemberIpIndexUnique index to identify the IP address within the path specifies by wwpLeosVplsMplsPathIndex.ro
INTEGER
.1.3.6.1.4.1.6141.2.60.28.1.1.11.1.2
wwpLeosVplsMplsPathMemberIpSpecifies the IP address of the Hop that the tunnel the tunnel should traverse.rw
IpAddress
.1.3.6.1.4.1.6141.2.60.28.1.1.11.1.3
wwpLeosVplsMplsPathMemberRowStatusUsed to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. To delete a row in this table, a manager must set this object to 'destroy'. If the entry exists, it will be displayed as 'active'.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.6141.2.60.28.1.1.11.1.4
wwpLeosVplsRsvpAttrTableRSVP Attr Table used by MPLS wwpLeosVplsEncapTunnelTable Tunnels when wwpLeosVplsEncapTunnelProtType = rsvp. Whenever entry is created in the wwpLeosVplsEncapTunnelTable table with wwpLeosVplsEncapTunnelProtType = rsvp and wwpLeosVplsEncapTunnelType = dynamic then corresponding entry will be created in this table with the same index as wwpLeosVplsEncapTunnelId.
SEQUENCE OF WwpLeosVplsRsvpAttrEntry
.1.3.6.1.4.1.6141.2.60.28.1.1.12
wwpLeosVplsRsvpAttrEntryEntry in wwpLeosVplsRsvpAttrTable table.
WwpLeosVplsRsvpAttrEntry
.1.3.6.1.4.1.6141.2.60.28.1.1.12.1
wwpLeosVplsRsvpAttrIndexUnique index into the table.ro
INTEGER
.1.3.6.1.4.1.6141.2.60.28.1.1.12.1.1
wwpLeosVplsRsvpAttrHoldPriThe Hold priority used by RSVP protocol when signaling for tunnels.rw
INTEGER
.1.3.6.1.4.1.6141.2.60.28.1.1.12.1.2
wwpLeosVplsRsvpAttrSetupPriThe setup priority used by RSVP protocol when signaling for tunnels.rw
INTEGER
.1.3.6.1.4.1.6141.2.60.28.1.1.12.1.3
wwpLeosVplsRsvpAttrRecordRouteThe object specifies if record route feature is enabled when RSVP protocol is used to signal tunnel LSP.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.6141.2.60.28.1.1.12.1.4
wwpLeosVplsEncapTunnelTableThis table represents the encap tunnels for VPLS. To create STATIC encap tunnel following objects must be set Encap and Decap Tunnel name cannot be same but indexes can be wwpLeosVplsEncapTunnelName must be specified. wwpLeosVplsEncapTunnelEncapLabel must be specified (0, 32..1023) wwpLeosVplsEncapTunnelType must be set to static wwpLeosVplsEncapTunnelRowStatus must be set to createAndGo To create DYNAMIC encap tunnel following objects must be set wwpLeosVplsEncapTunnelName must be specified wwpLeosVplsEncapTunnelType must be set to dynamic wwpLeosVplsEncapTunnelProtType must be set to rsvp wwpLeosVplsEncapTunnelPathName must be specified, this path must exist in wwpLeosVplsMplsPathTable wwpLeosVplsEncapTunnelRowStatus must be set to createAndGo. wwpLeosVplsEncapTunnelFastReroute must be set if wanted to use fast reroute wwpLeosVplsEncapTunnelLspType must be specified, if not specified then it will be assumed primary To create DYNAMIC encap backup tunnel following objects must be set wwpLeosVplsEncapTunnelName must be set to primary tunnel name that this tunnel is backing up. wwpLeosVplsEncapTunnelType must be set to dynamic wwpLeosVplsEncapTunnelProtType must be set to rsvp wwpLeosVplsEncapTunnelPathName must be specified, this path must exist in wwpLeosVplsMplsPathTable wwpLeosVplsEncapTunnelRowStatus must be set to createAndGo. To create static PBT encap tunnel following objects must be set wwpLeosVplsEncapTunnelName must be specified wwpLeosVplsEncapTunnelType must be set to staticPbt wwpLeosVplsEncapTunnelBVID must be specified wwpLeosVplsEncapTunnelRowStatus must be set to createAndGo. wwpLeosVplsEncapTunnelDestBridgeIndex must be set wwpLeosVplsEncapTunnelEgressPort must be specified
SEQUENCE OF WwpLeosVplsEncapTunnelEntry
.1.3.6.1.4.1.6141.2.60.28.1.1.13
wwpLeosVplsEncapTunnelEntryRepresents each entry in wwpLeosVplsEncapTunnelTable.
WwpLeosVplsEncapTunnelEntry
.1.3.6.1.4.1.6141.2.60.28.1.1.13.1
wwpLeosVplsEncapTunnelIdThis object specifies the unique index used in the table.ro
INTEGER
.1.3.6.1.4.1.6141.2.60.28.1.1.13.1.1
wwpLeosVplsEncapTunnelNameThis object specfies the name assigned to this tunnel. This object can only be specified while creating entry in the table and cannot be modified after the entry has been created. Encap and Decap Tunnel name cannot be same but indexes can be. When creating backup tunnel this name should be set to same name that is also used by primary tunnel.rw
DisplayString
.1.3.6.1.4.1.6141.2.60.28.1.1.13.1.2
wwpLeosVplsEncapTunnelTypeThis object specifies the type of tunnel. This object can only be specified while creating entry in the table and cannot be modified after the entry has been created.rw
Enumeration
.1.3.6.1.4.1.6141.2.60.28.1.1.13.1.3
wwpLeosVplsEncapTunnelDestAddrThis object specifies the IP address used to resolve this tunnel. This object is only applicable if wwpLeosVplsEncapTunnelType not equal to staticPbt.rw
IpAddress
.1.3.6.1.4.1.6141.2.60.28.1.1.13.1.4
wwpLeosVplsEncapTunnelPathIndexThis object specifies the path that this tunnel is supposed to use signal labels for this tunnel. This object is only used if wwpLeosVplsEncapTunnelType is set to dynamic.rw
Integer32
.1.3.6.1.4.1.6141.2.60.28.1.1.13.1.5
wwpLeosVplsEncapTunnelEncapCosPolicyThis object specifies the PBT encapsulated cos policy assigned to this tunnel. inheritVC and inheritVs options are deprecated and should not be used. rcos-mapped option should be used in place of inheritVcrw
Enumeration
.1.3.6.1.4.1.6141.2.60.28.1.1.13.1.6
wwpLeosVplsEncapTunnelEncapFixedExpThis object specifies the encap fixed EXP assigned to this tunnel.rw
INTEGER
.1.3.6.1.4.1.6141.2.60.28.1.1.13.1.7
wwpLeosVplsEncapTunnelTTLPolicyThis object specifies the TTL policy for given tunnel.rw
Enumeration
.1.3.6.1.4.1.6141.2.60.28.1.1.13.1.8
wwpLeosVplsEncapTunnelEncapLabelThis mib object specifies the encap label assigned to this tunnel. If the label is not yet known (signaling in process), the object should return a value of 0xFFFF.rw
Unsigned32
.1.3.6.1.4.1.6141.2.60.28.1.1.13.1.9
wwpLeosVplsEncapTunnelProtTypeSetting this object at the time of entry creation will specify the type of Protocol to be used for this tunnel. This object is only used if wwpLeosVplsEncapTunnelType is set to dynamic. This object cannot be modified after the entry has been created.rw
Enumeration
.1.3.6.1.4.1.6141.2.60.28.1.1.13.1.10
wwpLeosVplsEncapTunnelDestResolvedMacThis object specifies the resolved mac address for given destination IP (wwpLeosVplsEncapTunnelDestIp).ro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.6141.2.60.28.1.1.13.1.11
wwpLeosVplsEncapTunnelOperStatusThis mib object represents the operational status of tunnel.ro
Enumeration
.1.3.6.1.4.1.6141.2.60.28.1.1.13.1.12
wwpLeosVplsEncapTunnelAdminStatusThis mib object represents the administrative status of tunnel.rw
Enumeration
.1.3.6.1.4.1.6141.2.60.28.1.1.13.1.13
wwpLeosVplsEncapTunnelDestResolvedPortThis mib object represents the resolved port number to destination.ro
INTEGER
.1.3.6.1.4.1.6141.2.60.28.1.1.13.1.14
wwpLeosVplsEncapTunnelDestResolvedVlanThis mib object represents the resolved transport vlan to destination.ro
INTEGER
.1.3.6.1.4.1.6141.2.60.28.1.1.13.1.15
wwpLeosVplsEncapTunnelRowStatusSetting this object to 'createAndGo' will create the entry in the table. Setting this object to 'destroy' will delete the entry from the table. Refer to description of wwpLeosVplsEncapTunnelTable for details of creating and deleting entries in the table.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.6141.2.60.28.1.1.13.1.16
wwpLeosVplsEncapTunnelFastRerouteThis object specifies if the backup tunnel should provide link or node protection. This object should only be specified if wwpLeosVplsEncapTunnelType = dynamic and wwpLeosVplsEncapTunnelLspType = backup. This object cannot be modified once created.rw
Enumeration
.1.3.6.1.4.1.6141.2.60.28.1.1.13.1.17
wwpLeosVplsEncapTunnelLspTypeThis object specifies if the tunnel lsp is primary or backup tunnel.rw
Enumeration
.1.3.6.1.4.1.6141.2.60.28.1.1.13.1.18
wwpLeosVplsEncapTunnelPartnerTunnelIdThis object specifies if the partner tunnel ID.ro
INTEGER
.1.3.6.1.4.1.6141.2.60.28.1.1.13.1.19
wwpLeosVplsEncapTunnelBVIDThis object specifies the provider backbone bridge vlan. This object is only applicable if wwpLeosVplsEncapTunnelType is set to staticPbt otherwise this object will be ignored.rw
VlanId
.1.3.6.1.4.1.6141.2.60.28.1.1.13.1.20
wwpLeosVplsEncapTunnelDestBridgeIndexThis object specifies the provider backbone bridge index. This object is only applicable if wwpLeosVplsEncapTunnelType is set to staticPbt otherwise this object will be ignored. This object must be set to one of the values specified by wwpLeosPbtBridgeNameMacMapIndex. If this object is set to 0 then this value will be ignored.rw
Integer32
.1.3.6.1.4.1.6141.2.60.28.1.1.13.1.21
wwpLeosVplsEncapTunnelEgressPortThis object specifies the provider backbone bridge port. This object is only applicable if wwpLeosVplsEncapTunnelType is set to staticPbt otherwise this object will be ignored.rw
Integer32
.1.3.6.1.4.1.6141.2.60.28.1.1.13.1.22
wwpLeosVplsEncapTunnelEncapFixedPCPThis object specifies the encap fixed PCP assigned to this tunnel.rw
INTEGER
.1.3.6.1.4.1.6141.2.60.28.1.1.13.1.23
wwpLeosVplsEncapTunnelActiveThis object specifes if the tunnel is active, and it is only valid if TunnelType is staticPbt.ro
Enumeration
.1.3.6.1.4.1.6141.2.60.28.1.1.13.1.24
wwpLeosVplsDecapTunnelTableThis table represents the Decap tunnels for VPLS wwpLeosVplsDecapTunnelType If not set will default to static To create STATIC Decap tunnel following objects must be set Encap and Decap Tunnel name cannot be same but indexes can be wwpLeosVplsDecapTunnelName must be specified wwpLeosVplsDecapTunnelLabel must be specified (0, 32..1023) wwpLeosVplsDecapTunnelRowStatus must be set to createAndGo. To create STATIC Decap PBT tunnel following objects must be set Encap and Decap Tunnel name cannot be same but indexes can be wwpLeosVplsDecapTunnelType must be set to staticPbt wwpLeosVplsDecapTunnelName must be specified wwpLeosVplsDecapTunnelBVID must be specified wwpLeosVplsDecapTunnelBridgeIndex must be specified wwpLeosVplsDecapTunnelPort must be specified wwpLeosVplsDecapTunnelRowStatus must be set to createAndGo.
SEQUENCE OF WwpLeosVplsDecapTunnelEntry
.1.3.6.1.4.1.6141.2.60.28.1.1.14
wwpLeosVplsDecapTunnelEntryrepresents each entry in wwpLeosVplsDecapTunnelTable.
WwpLeosVplsDecapTunnelEntry
.1.3.6.1.4.1.6141.2.60.28.1.1.14.1
wwpLeosVplsDecapTunnelIdThis object specifies the unique index used in the table.ro
INTEGER
.1.3.6.1.4.1.6141.2.60.28.1.1.14.1.1
wwpLeosVplsDecapTunnelNameThis object specfies the name assigned to the tunnel. This object can only be specified while creating entry in the table and cannot be modified after the entry has been created.rw
DisplayString
.1.3.6.1.4.1.6141.2.60.28.1.1.14.1.2
wwpLeosVplsDecapTunnelLabelThis mib object specifies the Decap label assigned to this tunnel. If the label is not yet known (signaling in process), the object should return a value of 0xFFFF.rw
Unsigned32
.1.3.6.1.4.1.6141.2.60.28.1.1.14.1.3
wwpLeosVplsDecapTunnelTypeThis object specifies if the tunnel is created because of remote PE request (dynamic tunnel) or it is created by the user on the device (Decap tunnel). This object cannot be set to dynamic.rw
Enumeration
.1.3.6.1.4.1.6141.2.60.28.1.1.14.1.4
wwpLeosVplsDecapTunnelRowStatusSetting this object to 'createAndGo' will create the entry in the table. Setting this object to 'destroy' will delete the entry from the table. Refer to description of wwpLeosVplsDecapTunnelTable for details of creating and deleting entries in the table.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.6141.2.60.28.1.1.14.1.5
wwpLeosVplsDecapTunnelBVIDThis object specifies the provider bridge vlan ID expected in the mac in mac frames ingressing the device from provider bridge facing side.rw
Integer32
.1.3.6.1.4.1.6141.2.60.28.1.1.14.1.6
wwpLeosVplsDecapTunnelBridgeIndexThis object specifies the provider bridge host index which will be used to query wwpLeosPbtHostNameMacMapTable to find out corresponding mac address expected in the pbt frames ingressing the device from provider bridge facing side.rw
Integer32
.1.3.6.1.4.1.6141.2.60.28.1.1.14.1.7
wwpLeosVplsDecapTunnelPortThis object specifies the incoming port on which the pbt frames are expected.rw
Integer32
.1.3.6.1.4.1.6141.2.60.28.1.1.14.1.8
wwpLeosVplsDecapTunnelMacThis object specifies the source mac address expected in the pbt frames coming from provider network facing side. This mac address is derived from wwpLeosPbtHostNameMacMapTable table using the value specified by wwpLeosVplsDecapTunnelBridgeName.ro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.6141.2.60.28.1.1.14.1.9
wwpLeosVplsDecapTunnelOperStatusThis object represents the operational status of tunnel.ro
Enumeration
.1.3.6.1.4.1.6141.2.60.28.1.1.14.1.10
wwpLeosVplsVirtualCircuitMplsTableThe (conceptual) table listing the mpls virtual circuit table. To create entry use SNMP, multiple set operation must be used. Following Mib objects must be specified while creating MPLS virtual circuit Mpls and Ethernet virtual circuit name cannot be same but indexes can be - wwpLeosVplsVirtualCircuitMplsType must be set to dynamic - wwpLeosVplsVirtualCircuitMplsStatus must be set to createAndGo - wwpLeosVplsVirtualCircuitMplsName must be specified - wwpLeosVplsVirtualCircuitMplsDestAddr must be specified Following MIB objects must be specified while creating static MPLS virtual circuit - wwpLeosVplsVirtualCircuitMplsType must be set to static - wwpLeosVplsVirtualCircuitMplsStatus must be set to createAndGo - wwpLeosVplsVirtualCircuitMplsName must be specified - wwpLeosVplsVirtualCircuitMplsDestAddr must be specified - wwpLeosVplsVirtualCircuitMplsEncapLabel must be specified (2048..18431) - wwpLeosVplsVirtualCircuitMplsDecapLabel must be specified (2048..18431)
SEQUENCE OF WwpLeosVplsVirtualCircuitMplsEntry
.1.3.6.1.4.1.6141.2.60.28.1.1.15
wwpLeosVplsVirtualCircuitMplsEntryThe virtual circuit table entry index by wwpLeosVplsVirtualCircuitMplsIndex.
WwpLeosVplsVirtualCircuitMplsEntry
.1.3.6.1.4.1.6141.2.60.28.1.1.15.1
wwpLeosVplsVirtualCircuitMplsIndexThis represents the virtual circuit index in the table. This number should be unique in the table.ro
INTEGER
.1.3.6.1.4.1.6141.2.60.28.1.1.15.1.1
wwpLeosVplsVirtualCircuitMplsNameThis represents the name of the virtual circuit associated with the given virtual circuit. Mpls and Ethernet virtual circuit name cannot be same but indexes can be.rw
DisplayString
.1.3.6.1.4.1.6141.2.60.28.1.1.15.1.2
wwpLeosVplsVirtualCircuitMplsTypeThis represents the type of the virtual circuit.rw
Enumeration
.1.3.6.1.4.1.6141.2.60.28.1.1.15.1.3
wwpLeosVplsVirtualCircuitMplsDestAddrThis represents the destination address used by the signaling protocol if wwpLeosVplsVirtualCircuitMplsType is set to dynamic. This object cannot be modified once entry is created.rw
IpAddress
.1.3.6.1.4.1.6141.2.60.28.1.1.15.1.4
wwpLeosVplsVirtualCircuitMplsTunnelPolicyThis object represents that this virtual circuit should select the tunnel as fixed or use the first active tunnel available on the outgoing port. If this object is set to fixed then wwpLeosVplsVirtualCircuitMplsTunnelIndx must be specified.rw
Enumeration
.1.3.6.1.4.1.6141.2.60.28.1.1.15.1.5
wwpLeosVplsVirtualCircuitMplsFixedTunnelIdThis represents the tunnel that this virtual circuit should be mapped to. This object is only used if wwpLeosVplsVirtualCircuitMplsTunnelPolicy is set to fixed.rw
INTEGER
.1.3.6.1.4.1.6141.2.60.28.1.1.15.1.6
wwpLeosVplsVirtualCircuitMplsActiveTunnelIdThis represents the tunnel that this virtual circuit is currently using. This object is equal to wwpLeosVplsVirtualCircuitMplsFixedTunnelId if wwpLeosVplsVirtualCircuitMplsTunnelPolicy is set to fixed.ro
INTEGER
.1.3.6.1.4.1.6141.2.60.28.1.1.15.1.7
wwpLeosVplsVirtualCircuitMplsOperStatusThis represents the operational status of the virtual circuit.ro
Enumeration
.1.3.6.1.4.1.6141.2.60.28.1.1.15.1.8
wwpLeosVplsVirtualCircuitMplsEncapLabelIf wwpLeosVplsVirtualCircuitMplsType is set to static then this object specifies the encap label the should be used for this virtual circuit. Label should be in the range 2048..18431. If the label is not yet known (signaling in process), the object should return a value of 0xFFFF.rw
Unsigned32
.1.3.6.1.4.1.6141.2.60.28.1.1.15.1.9
wwpLeosVplsVirtualCircuitMplsDecapLabelIf wwpLeosVplsVirtualCircuitMplsType is set to static then this object specifies the decap label the should be used for this virtual circuit. Label should be in the range 2048..18431. If the label is not yet known (signaling in process), the object should return a value of 0xFFFF.rw
Unsigned32
.1.3.6.1.4.1.6141.2.60.28.1.1.15.1.10
wwpLeosVplsVirtualCircuitMplsGroupIdThis represents the group ID advertised in the LDP signaling if wwpLeosVplsVirtualCircuitMplsType is set to dynamic.rw
Unsigned32
.1.3.6.1.4.1.6141.2.60.28.1.1.15.1.11
wwpLeosVplsVirtualCircuitMplsProtectionTypeThis represents that this virtual circuit is primary or secondary virtual circuit. If primary virtual circuit goes down that secondary virtual circuit will be used.rw
Enumeration
.1.3.6.1.4.1.6141.2.60.28.1.1.15.1.12
wwpLeosVplsVirtualCircuitMplsStatusTlvSpecifies whether the Status TLV in LDP signaling should be advertised or not. This mib object is only used if wwpLeosVplsVirtualCircuitMplsType is set to dynamic. This field cannot be modified while wwpLeosVplsVirtualCircuitMplsStatus is activerw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.6141.2.60.28.1.1.15.1.13
wwpLeosVplsVirtualCircuitMplsMtuSetting this object will set the MTU for this VC. This MTU is advertised to the peer if wwpLeosVplsVirtualCircuitMplsType is set to dynamic.rw
INTEGER
.1.3.6.1.4.1.6141.2.60.28.1.1.15.1.14
wwpLeosVplsVirtualCircuitMplsStatusUsed to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. To delete a row in this table, a manager must set this object to 'destroy'. If the entry exists, it will be displayed as 'active'.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.6141.2.60.28.1.1.15.1.15
wwpLeosVplsVirtualCircuitMplsStatsTableThe (conceptual) table listing the mpls virtual circuit stats table.
SEQUENCE OF WwpLeosVplsVirtualCircuitMplsStatsEntry
.1.3.6.1.4.1.6141.2.60.28.1.1.16
wwpLeosVplsVirtualCircuitMplsStatsEntryThe mpls virtual circuit stats table entry index by wwpLeosVplsVirtualCircuitMplsIndex.
WwpLeosVplsVirtualCircuitMplsStatsEntry
.1.3.6.1.4.1.6141.2.60.28.1.1.16.1
wwpLeosVplsVirtualCircuitMplsTxBytesHiThis represents the total number of higher 32 bits transmitted for given virtual circuit.ro
Counter32
.1.3.6.1.4.1.6141.2.60.28.1.1.16.1.1
wwpLeosVplsVirtualCircuitMplsTxBytesLoThis represents the total number of lower 32 bits transmitted for given virtual circuit.ro
Counter32
.1.3.6.1.4.1.6141.2.60.28.1.1.16.1.2
wwpLeosVplsVirtualCircuitMplsRxBytesHiThis represents the total number of higher 32 bits received for given mpls virtual circuit.ro
Counter32
.1.3.6.1.4.1.6141.2.60.28.1.1.16.1.3
wwpLeosVplsVirtualCircuitMplsRxBytesLoThis represents the total number of lower 32 bits received for given virtual circuit.ro
Counter32
.1.3.6.1.4.1.6141.2.60.28.1.1.16.1.4
wwpLeosVplsVirtualCircuitEthTableThe (conceptual) table listing the virtual circuit table. To create entry use SNMP, multiple set operation must be usedd because following mib objects needs to be set while creating entry in the table. Mpls and Ethernet virtual circuit name cannot be same but indexes can be - wwpLeosVplsVirtualCircuitEthName must be specified - wwpLeosVplsVirtualCircuitEthProviderVlanId must be specified and must exist on the device. - wwpLeosVplsVirtualCircuitEthStatus must be specified.
SEQUENCE OF WwpLeosVplsVirtualCircuitEthEntry
.1.3.6.1.4.1.6141.2.60.28.1.1.17
wwpLeosVplsVirtualCircuitEthEntryThe virtual circuit table entry index by wwpLeosVplsVirtualCircuitMplsIndex.
WwpLeosVplsVirtualCircuitEthEntry
.1.3.6.1.4.1.6141.2.60.28.1.1.17.1
wwpLeosVplsVirtualCircuitEthIndexThis represents the virtual circuit index in the table. This number should be unique in the table.ro
INTEGER
.1.3.6.1.4.1.6141.2.60.28.1.1.17.1.1
wwpLeosVplsVirtualCircuitEthNameThis represents the name of the virtual circuit associated with the given virtual circuit. Mpls and Ethernet virtual circuit name cannot be same but indexes can berw
DisplayString
.1.3.6.1.4.1.6141.2.60.28.1.1.17.1.2
wwpLeosVplsVirtualCircuitEthProviderVlanIdThis represents the provider vlan id associated with the virtual circuit for a given wwpLeosVplsVirtualCircuitMplsIndex.rw
VlanId
.1.3.6.1.4.1.6141.2.60.28.1.1.17.1.3
wwpLeosVplsVirtualCircuitEthRowStatusUsed to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. To delete a row in this table, a manager must set this object to 'destroy' If the entry exists, it will be displayed as 'active'.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.6141.2.60.28.1.1.17.1.4
wwpLeosVplsVirtualCircuitEthStatsMonitorTo disable stats collection, set this object to off(2). To enable stats collection, set this object to on(1).rw
Enumeration
.1.3.6.1.4.1.6141.2.60.28.1.1.17.1.5
wwpLeosVplsVirtualCircuitEtherTypeTableThe (conceptual) table listing the ether type to be used for each port.
SEQUENCE OF WwpLeosVplsVirtualCircuitEtherTypeEntry
.1.3.6.1.4.1.6141.2.60.28.1.1.18
wwpLeosVplsVirtualCircuitEtherTypeEntryThe entry to assign ether type for each port.
WwpLeosVplsVirtualCircuitEtherTypeEntry
.1.3.6.1.4.1.6141.2.60.28.1.1.18.1
wwpLeosVplsVirtualCircuitPortIdThis object specifies the port number used as index in the table.rw
INTEGER
.1.3.6.1.4.1.6141.2.60.28.1.1.18.1.1
wwpLeosVplsVirtualCircuitEtherTypeThis object specifies the ethertype of the outer VLAN tag for given port.rw
Enumeration
.1.3.6.1.4.1.6141.2.60.28.1.1.18.1.2
wwpLeosVplsVirtualCircuitEtherTypePolicyThis object specifies the policy for the ethertype of the outer VLAN tag for given port. All means all frames will have the type set in wwpLeosVplsVirtualCircuitEtherType. encapOnly means only Q-in-Q encapsulated frames will use that value. If wwpLeosVplsVirtualCircuitEtherType is set to type 8100 then ALL will always be the operational value for this item. vlanTpid means that the port will use the TPID configured for the vlan at egress.rw
Enumeration
.1.3.6.1.4.1.6141.2.60.28.1.1.18.1.3
wwpLeosVplsVirtualCircuitEthStatsTableThe (conceptual) table listing the virtual circuit stats table.
SEQUENCE OF WwpLeosVplsVirtualCircuitEthStatsEntry
.1.3.6.1.4.1.6141.2.60.28.1.1.19
wwpLeosVplsVirtualCircuitEthStatsEntryThe ethernet virtual circuit stats table entry index by wwpLeosVplsVirtualCircuitMplsIndex.
WwpLeosVplsVirtualCircuitEthStatsEntry
.1.3.6.1.4.1.6141.2.60.28.1.1.19.1
wwpLeosVplsVirtualCircuitEthTxBytesHiThis represents the total number of higher 32 bits transmitted for given virtual circuit.ro
Counter32
.1.3.6.1.4.1.6141.2.60.28.1.1.19.1.1
wwpLeosVplsVirtualCircuitEthTxBytesLoThis represents the total number of lower 32 bits transmitted for given virtual circuit.ro
Counter32
.1.3.6.1.4.1.6141.2.60.28.1.1.19.1.2
wwpLeosVplsVirtualCircuitEthRxBytesHiThis represents the total number of higher 32 bits received for given virtual circuit.ro
Counter32
.1.3.6.1.4.1.6141.2.60.28.1.1.19.1.3
wwpLeosVplsVirtualCircuitEthRxBytesLoThis represents the total number of lower 32 bits received for given virtual circuit.ro
Counter32
.1.3.6.1.4.1.6141.2.60.28.1.1.19.1.4
wwpLeosVirtualCircuitEthStatsClearTo clear the statistics for the given virtual circuit, set this object to clear(1)rw
Enumeration
.1.3.6.1.4.1.6141.2.60.28.1.1.19.1.5
wwpLeosVplsVirtualSwitchMplsTableThis table is used to manage virtual switch entries on the device.
SEQUENCE OF WwpLeosVplsVirtualSwitchMplsEntry
.1.3.6.1.4.1.6141.2.60.28.1.1.20
wwpLeosVplsVirtualSwitchMplsEntryThis entry corresponds to single entry in wwpLeosVplsVirtualSwitchMplsTable table. To create an entry in the table following criteria must be met. Mpls and Ethernet virtual switch name cannot be same but indexes can be - wwpLeosVplsVirtualSwitchMplsVpnId must be specified. - wwpLeosVplsVirtualSwitchMplsType must be specified. - wwpLeosVplsVirtualSwitchMplsName must be specified. - wwpLeosVplsVirtualSwitchMplsStatus must be specified.
WwpLeosVplsVirtualSwitchMplsEntry
.1.3.6.1.4.1.6141.2.60.28.1.1.20.1
wwpLeosVplsVirtualSwitchMplsIndxThis object specifies the virtual switch index which is used as unique index in the table.ro
INTEGER
.1.3.6.1.4.1.6141.2.60.28.1.1.20.1.1
wwpLeosVplsVirtualSwitchMplsNameThis object specifies the virtual switch name. this object can only be specified at the time of creation and cannot be modified later. Mpls and Ethernet virtual switch name cannot be same but indexes can be.rw
DisplayString
.1.3.6.1.4.1.6141.2.60.28.1.1.20.1.2
wwpLeosVplsVirtualSwitchMplsVpnIdThis object specifies the subscriber vlan Id for given virtual switch.rw
Unsigned32
.1.3.6.1.4.1.6141.2.60.28.1.1.20.1.3
wwpLeosVplsVirtualSwitchMplsEncapCosPolicyThis object specifies the ingress cos policy for given virtual switch.rw
Enumeration
.1.3.6.1.4.1.6141.2.60.28.1.1.20.1.4
wwpLeosVplsVirtualSwitchMplsEncapFixedDot1dPriThis object specifies the ingress fixed cos attributes for given virtual switch.rw
INTEGER
.1.3.6.1.4.1.6141.2.60.28.1.1.20.1.5
wwpLeosVplsVirtualSwitchMplsDecapCosPolicyThis object specifies the egress cos policy for given virtual switch.rw
Enumeration
.1.3.6.1.4.1.6141.2.60.28.1.1.20.1.6
wwpLeosVplsVirtualSwitchMplsDecapFixedDot1dPriThis object specifies the egress cos attributes for given virtual switch.rw
INTEGER
.1.3.6.1.4.1.6141.2.60.28.1.1.20.1.7
wwpLeosVplsVirtualSwitchMplsCtrlProtocolTunnelStateThis object enables or disables control protocol tunneling for a given virtual switch.rw
Enumeration
.1.3.6.1.4.1.6141.2.60.28.1.1.20.1.8
wwpLeosVplsVirtualSwitchMplsDecapTTLPolicyThis object specifies the TTL policy for a given virtual switch.rw
Enumeration
.1.3.6.1.4.1.6141.2.60.28.1.1.20.1.9
wwpLeosVplsVirtualSwitchMplsTypeThis object specifies the type of virtual switch.rw
Enumeration
.1.3.6.1.4.1.6141.2.60.28.1.1.20.1.10
wwpLeosVplsVirtualSwitchMplsRowStatusThis object can be set to 'createAndGo' to create entry in the table. This object can be set to 'destroy' to delete entry in the table. Following objects must be set to valid values to create entry in the table.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.6141.2.60.28.1.1.20.1.11
wwpLeosVplsVirtualSwitchMplsMacLrnStateSetting this object will set the Mac learning state for a given mpls virtual switch.rw
Enumeration
.1.3.6.1.4.1.6141.2.60.28.1.1.20.1.12
wwpLeosVplsVirtualSwitchMplsTunnelMethodSetting this object will set the tunneling method for a given mpls virtual switch.rw
Enumeration
.1.3.6.1.4.1.6141.2.60.28.1.1.20.1.13
wwpLeosVplsVirtualSwitchMplsCtrlProtocolDot1dPriThis object specifies the .1d priority to use when encapsulation control frames.rw
INTEGER
.1.3.6.1.4.1.6141.2.60.28.1.1.20.1.14
wwpLeosVplsVirtualSwitchMplsSubscriberDot1dPolicySetting this object will configure the policy used to decide whether or not the subscriber frame .1d priorty should be left alone, or remarked to the computed provider priority.rw
Enumeration
.1.3.6.1.4.1.6141.2.60.28.1.1.20.1.15
wwpLeosVplsVirtualSwitchMplsCtrlProtTransFrameValidateSetting this object will set the transparent-mode validate for a given mpls virtual switch.rw
Enumeration
.1.3.6.1.4.1.6141.2.60.28.1.1.20.1.16
wwpLeosVplsVirtualSwitchMplsHonorPrioritySetting this object will select either the c-vlan or s-vlan priority to use through the Virtual Switch and it's associated MPLS Tunnel.rw
Enumeration
.1.3.6.1.4.1.6141.2.60.28.1.1.20.1.17
wwpLeosVplsVirtualSwitchMplsMemberTableThis table is used to create mpls virtual switch subscriber port-vlan membership entry.deprecated
SEQUENCE OF WwpLeosVplsVirtualSwitchMplsMemberEntry
.1.3.6.1.4.1.6141.2.60.28.1.1.21
wwpLeosVplsVirtualSwitchMplsMemberEntryThis entry corresponds to single port-vlan subscriber entry in wwpLeosVplsVirtualSwitchMplsMemberTable table.deprecated
WwpLeosVplsVirtualSwitchMplsMemberEntry
.1.3.6.1.4.1.6141.2.60.28.1.1.21.1
wwpLeosVplsVirtualSwitchMplsMemberPortIdThis object specifies the port number which is to be added as a customer facing port for the mpls virtual switch index wwpLeosVplsVirtualSwitchMplsIndx.rw
INTEGER
.1.3.6.1.4.1.6141.2.60.28.1.1.21.1.1
wwpLeosVplsVirtualSwitchMplsMemberVlanIdThis object specifies the subscriber vlan attached to this mpls virtual switch index wwpLeosVplsVirtualSwitchMplsIndx. This object cannot be modified one entry is created in this table. This object can only be specified when creating entries in this table.rw
INTEGER
.1.3.6.1.4.1.6141.2.60.28.1.1.21.1.2
wwpLeosVplsVirtualSwitchMplsMemberRowStatusUsed to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. To delete a row in this table, a manager must set this object to 'destroy'. If the entry exists, it will be displayed as 'active'.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.6141.2.60.28.1.1.21.1.3
wwpLeosVplsVirtualSwitchMplsMemberEncapCosPolicyThis object specifies the ingress cos policy for given member entry. By default 'inheritVs' the encap CoS policy is inherited from the parent virtual-switch settingsrw
Enumeration
.1.3.6.1.4.1.6141.2.60.28.1.1.21.1.4
wwpLeosVplsVirtualSwitchMplsMemberEncapCosFixedDot1DPriThis object specifies the ingress fixed cos attributes for given member entry. This attribute is only valid when the member EncapCosPolicy is set to 'fixed'rw
INTEGER
.1.3.6.1.4.1.6141.2.60.28.1.1.21.1.5
wwpLeosVplsVirtualSwitchMplsMemberSubscriberDot1dPolicyThis object configures the member policy used to decide if the subscriber frame's 'c-vlan' .1d priorty should be left alone 'leave', or remarked 'provider-inherit' to the resolved provider 's-vlan' priority. This attribute is valid when the member's SubscriberDot1Policy is 'leave' or 'provider-inherit'. If stt to 'inheritVs' the attribute is inherited from the parent virtual-switchrw
Enumeration
.1.3.6.1.4.1.6141.2.60.28.1.1.21.1.6
wwpLeosVplsVirtualSwitchMplsMemberStatsTableThe (conceptual) table listing the virtual switch member stats table.deprecated
SEQUENCE OF WwpLeosVplsVirtualSwitchMplsMemberStatsEntry
.1.3.6.1.4.1.6141.2.60.28.1.1.22
wwpLeosVplsVirtualSwitchMplsMemberStatsEntryThe virtual switch member stats table entry index by wwpLeosVplsVirtualSwitchMplsIndx and wwpLeosVplsVirtualSwitchMplsMemberPortId.deprecated
WwpLeosVplsVirtualSwitchMplsMemberStatsEntry
.1.3.6.1.4.1.6141.2.60.28.1.1.22.1
wwpLeosVplsVirtualSwitchMplsMemberRxBytesHiThis represents the total number of higher 32 bits received for given mpls virtual switch member port.ro
Counter32
.1.3.6.1.4.1.6141.2.60.28.1.1.22.1.1
wwpLeosVplsVirtualSwitchMplsMemberRxBytesLoThis represents the total number of lower 32 bits received for given virtual switch member port.ro
Counter32
.1.3.6.1.4.1.6141.2.60.28.1.1.22.1.2
wwpLeosVplsVirtualSwitchMplsMemberMeshVcTableThis table is used to create mpls virtual switch mesh-vc membership entry.
SEQUENCE OF WwpLeosVplsVirtualSwitchMplsMemberMeshVcEntry
.1.3.6.1.4.1.6141.2.60.28.1.1.23
wwpLeosVplsVirtualSwitchMplsMemberMeshVcEntryThis entry corresponds to single mesh-vc entry in wwpLeosVplsVirtualSwitchMplsMemberMeshVcTable table.
WwpLeosVplsVirtualSwitchMplsMemberMeshVcEntry
.1.3.6.1.4.1.6141.2.60.28.1.1.23.1
wwpLeosVplsVirtualSwitchMplsMemberMeshVcMeshVcThis object specifies the mesh virtual circuit for this mpls virtual switch.ro
INTEGER
.1.3.6.1.4.1.6141.2.60.28.1.1.23.1.1
wwpLeosVplsVirtualSwitchMplsMemberMeshVcRowStatusUsed to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. To delete a row in this table, a manager must set this object to 'destroy'. If the entry exists, it will be displayed as 'active'.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.6141.2.60.28.1.1.23.1.2
wwpLeosVplsVirtualSwitchMplsMemberAcVcTableThis table is used to create mpls virtual switch mesh-vc membership entry.
SEQUENCE OF WwpLeosVplsVirtualSwitchMplsMemberAcVcEntry
.1.3.6.1.4.1.6141.2.60.28.1.1.24
wwpLeosVplsVirtualSwitchMplsMemberAcVcEntryThis entry corresponds to single mesh-vc entry in wwpLeosVplsVirtualSwitchMplsMemberAcVcTable table.
WwpLeosVplsVirtualSwitchMplsMemberAcVcEntry
.1.3.6.1.4.1.6141.2.60.28.1.1.24.1
wwpLeosVplsVirtualSwitchMplsMemberAcVcAcVcThis object specifies the attachment virtual circuit for this mpls virtual switch.ro
INTEGER
.1.3.6.1.4.1.6141.2.60.28.1.1.24.1.1
wwpLeosVplsVirtualSwitchMplsMemberAcVcRowStatusUsed to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. To delete a row in this table, a manager must set this object to 'destroy'. If the entry exists, it will be displayed as 'active'.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.6141.2.60.28.1.1.24.1.2
wwpLeosVplsSwitchMplsCtrlProtocolTableThe (conceptual) table listing the l2 virtual switch control frame protocol status tunnel for a given Vpls.
SEQUENCE OF WwpLeosVplsSwitchMplsCtrlProtocolEntry
.1.3.6.1.4.1.6141.2.60.28.1.1.25
wwpLeosVplsSwitchMplsCtrlProtocolEntryThe layer 2 virtual switch control frame protocol tunnel entry for the Vpls.
WwpLeosVplsSwitchMplsCtrlProtocolEntry
.1.3.6.1.4.1.6141.2.60.28.1.1.25.1
wwpLeosVplsSwitchMplsCtrlProtocolNumThis object represent the list of protocols the device can support.ro
Enumeration
.1.3.6.1.4.1.6141.2.60.28.1.1.25.1.1
wwpLeosVplsSwitchMplsCtrlTypeSetting this object to 'discard' will cause wwpLeosVplsSwitchMplsCtrlProtocolNum frames arriving at the specified UNI to be discarded. Setting this to 'peer' will cause the wwpLeosVplsSwitchMplsCtrlProtocolNum frame to be processed by the provider network and cause the provider network to behave as a peer. Setting this to 'tunnel' will cause the wwpLeosVplsSwitchMplsCtrlProtocolNum frame to be tunneled.rw
Enumeration
.1.3.6.1.4.1.6141.2.60.28.1.1.25.1.2
wwpLeosVplsVirtualSwitchEthTableThis table is used to manage virtual switch entries on the device.
SEQUENCE OF WwpLeosVplsVirtualSwitchEthEntry
.1.3.6.1.4.1.6141.2.60.28.1.1.26
wwpLeosVplsVirtualSwitchEthEntryThis entry corresponds to single entry in wwpLeosVplsVirtualSwitchEthernetTable table. To create an entry in the table following criteria must be met. - wwpLeosVplsVirtualSwitchEthRowStatus must be specified. - wwpLeosVplsVirtualSwitchEthernetName must be specified
WwpLeosVplsVirtualSwitchEthEntry
.1.3.6.1.4.1.6141.2.60.28.1.1.26.1
wwpLeosVplsVirtualSwitchEthIndxThis object specifies the virtual switch index which is used as unique index in the table.ro
INTEGER
.1.3.6.1.4.1.6141.2.60.28.1.1.26.1.1
wwpLeosVplsVirtualSwitchEthNameThis object specifies the virtual switch name. this object can only be specified at the time of creation and cannot be modified later. Mpls and Ethernet virtual switch name cannot be same but indexes can be.rw
DisplayString
.1.3.6.1.4.1.6141.2.60.28.1.1.26.1.2
wwpLeosVplsVirtualSwitchEthVcThis object specifies the primary virtual circuit ID associated with this virtual switch. To unset it set this to 0. If this object represents PBT virtual circuit then wwpLeosVplsVirtualSwitchEthVcType must also be set to pbt.rw
INTEGER
.1.3.6.1.4.1.6141.2.60.28.1.1.26.1.3
wwpLeosVplsVirtualSwitchEthEncapCosPolicyThis object specifies the ingress cos policy for given virtual switch.rw
Enumeration
.1.3.6.1.4.1.6141.2.60.28.1.1.26.1.4
wwpLeosVplsVirtualSwitchEthEncapFixedDot1dPriThis object specifies the ingress fixed cos attributes for given virtual switch.rw
INTEGER
.1.3.6.1.4.1.6141.2.60.28.1.1.26.1.5
wwpLeosVplsVirtualSwitchEthDecapCosPolicyThis object specifies the egress cos policy for given virtual switch.rw
Enumeration
.1.3.6.1.4.1.6141.2.60.28.1.1.26.1.6
wwpLeosVplsVirtualSwitchEthDecapFixedDot1dPriThis object specifies the egress cos attributes for given virtual switch.rw
INTEGER
.1.3.6.1.4.1.6141.2.60.28.1.1.26.1.7
wwpLeosVplsVirtualSwitchEthCtrlProtocolTunnelStateThis object enables or disables control protocol tunneling for a given virtual switch.rw
Enumeration
.1.3.6.1.4.1.6141.2.60.28.1.1.26.1.8
wwpLeosVplsVirtualSwitchEthRowStatusThis object can be set to 'createAndGo' to create entry in the table. This object can be set to 'destroy' to delete entry in the table. Following objects must be set to valid values to create entry in the table.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.6141.2.60.28.1.1.26.1.9
wwpLeosVplsVirtualSwitchEthMacLrnStateSetting this object will set the Mac learning state for each ethernet virtual switch.rw
Enumeration
.1.3.6.1.4.1.6141.2.60.28.1.1.26.1.10
wwpLeosVplsVirtualSwitchEthTunnelMethodSetting this object will set the tunneling method for each ethernet virtual switch.rw
Enumeration
.1.3.6.1.4.1.6141.2.60.28.1.1.26.1.11
wwpLeosVplsVirtualSwitchEthCtrlProtocolDot1dPriThis object specifies the .1d priority to use when encapsulation control frames.rw
INTEGER
.1.3.6.1.4.1.6141.2.60.28.1.1.26.1.12
wwpLeosVplsVirtualSwitchEthSubscriberDot1dPolicySetting this object will configure the policy used to decide whether or not the subscriber frame .1d priorty should be left alone, or remarked to the computed provider priority.rw
Enumeration
.1.3.6.1.4.1.6141.2.60.28.1.1.26.1.13
wwpLeosVplsVirtualSwitchEthCtrlProtTransFrameValidateSetting this object will set the transparent-mode validate for a given eth virtual switch.rw
Enumeration
.1.3.6.1.4.1.6141.2.60.28.1.1.26.1.14
wwpLeosVplsVirtualSwitchEthVcTypeThis object specifies the type of vc to be attached to this virtual switch. This object must be set (using SNMP multiple set operation) to pbt type if wwpLeosVplsVirtualSwitchEthVc specifies the pbt vc. Setting only wwpLeosVplsVirtualSwitchEthVcType will return error. Also setting wwpLeosVplsVirtualSwitchEthVcType to none will return error.rw
Enumeration
.1.3.6.1.4.1.6141.2.60.28.1.1.26.1.15
wwpLeosVplsVirtualSwitchEthHonorPriorityThis object specifies which Vlan priority to use on a Virtual Switch. Honor either the c-vlan or the s-vlan priority through the Virtual Switch and it's associated VC or Tunnel.rw
Enumeration
.1.3.6.1.4.1.6141.2.60.28.1.1.26.1.16
wwpLeosVplsVirtualSwitchEthDescriptionThis object specifies the virtual switch description.rw
OCTET STRING
.1.3.6.1.4.1.6141.2.60.28.1.1.26.1.17
wwpLeosVplsVirtualSwitchEthReservedVlanReserved vlan for the virtual-switch.rw
INTEGER
.1.3.6.1.4.1.6141.2.60.28.1.1.26.1.18
wwpLeosVplsVirtualSwitchEthMemberTableThis table is used to create virtual switch membership entry.deprecated
SEQUENCE OF WwpLeosVplsVirtualSwitchEthMemberEntry
.1.3.6.1.4.1.6141.2.60.28.1.1.27
wwpLeosVplsVirtualSwitchEthMemberEntryThis entry corresponds to single entry in wwpLeosVplsVirtualSwitchEthernetMemberTable table.deprecated
WwpLeosVplsVirtualSwitchEthMemberEntry
.1.3.6.1.4.1.6141.2.60.28.1.1.27.1
wwpLeosVplsVirtualSwitchEthMemberPortIdThis object specifies the port id associated with wwpLeosVplsVirtualSwitchEthIndx.ro
INTEGER
.1.3.6.1.4.1.6141.2.60.28.1.1.27.1.1
wwpLeosVplsVirtualSwitchEthMemberVlanThis object specifies the subscriber vlan attached to this eth virtual switch index wwpLeosVplsVirtualSwitchEthIndx. This object cannot be modified one entry is created. This object can only be specified when entry is created in this table.rw
INTEGER
.1.3.6.1.4.1.6141.2.60.28.1.1.27.1.2
wwpLeosVplsVirtualSwitchEthMemberRowStatusThis object can be set to 'createandgo' to add entry in the table. This object can be set to 'destroy' to delete entry in the table. Refer to description of table entry to see how to create entries in the table.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.6141.2.60.28.1.1.27.1.3
wwpLeosVplsVirtualSwitchEthMemberEncapCosPolicyThis object specifies the ingress cos policy for given member entry.rw
Enumeration
.1.3.6.1.4.1.6141.2.60.28.1.1.27.1.4
wwpLeosVplsVirtualSwitchEthMemberEncapCosFixedDot1DPriThis object specifies the ingress fixed cos attributes for given member entry. This attribute is only valid when the EncapCosPolicy is set to 'fixed'rw
INTEGER
.1.3.6.1.4.1.6141.2.60.28.1.1.27.1.5
wwpLeosVplsVirtualSwitchEthMemberSubscriberDot1dPolicyThis object configures the member policy used to decide if the subscriber frame's 'c-vlan' .1d priorty should be left alone 'leave', or remarked 'provider-inherit' to the resolved provider 's-vlan' priority. This attribute is valid when the member's SubscriberDot1Policy is 'leave' or 'provider-inherit'. If stt to 'inheritVs' the attribute is inherited from the parent virtual-switchrw
Enumeration
.1.3.6.1.4.1.6141.2.60.28.1.1.27.1.6
wwpLeosVplsVirtualSwitchEthMemberStatsTableThe (conceptual) table listing the virtual switch member stats table.deprecated
SEQUENCE OF WwpLeosVplsVirtualSwitchEthMemberStatsEntry
.1.3.6.1.4.1.6141.2.60.28.1.1.28
wwpLeosVplsVirtualSwitchEthMemberStatsEntryThe virtual switch member stats table entry index by wwpLeosVplsVirtualSwitchEthIndx and wwpLeosVplsVirtualSwitchEthMemberPortId.deprecated
WwpLeosVplsVirtualSwitchEthMemberStatsEntry
.1.3.6.1.4.1.6141.2.60.28.1.1.28.1
wwpLeosVplsVirtualSwitchEthMemberRxBytesHiThis represents the total number of higher 32 bits received for given virtual switch member port.ro
Counter32
.1.3.6.1.4.1.6141.2.60.28.1.1.28.1.1
wwpLeosVplsVirtualSwitchEthMemberRxBytesLoThis represents the total number of lower 32 bits received for given virtual switch member port.ro
Counter32
.1.3.6.1.4.1.6141.2.60.28.1.1.28.1.2
wwpLeosVplsSwitchEthCtrlProtocolTableThe (conceptual) table listing the l2 virtual switch control frame protocol status tunnel for a given Vpls.
SEQUENCE OF WwpLeosVplsSwitchEthCtrlProtocolEntry
.1.3.6.1.4.1.6141.2.60.28.1.1.29
wwpLeosVplsSwitchEthCtrlProtocolEntryThe layer 2 virtual switch control frame protocol tunnel entry for the Vpls.
WwpLeosVplsSwitchEthCtrlProtocolEntry
.1.3.6.1.4.1.6141.2.60.28.1.1.29.1
wwpLeosVplsSwitchEthCtrlProtocolNumThis object represent the list of protocols the device can support.ro
Enumeration
.1.3.6.1.4.1.6141.2.60.28.1.1.29.1.1
wwpLeosVplsSwitchEthCtrlTypeSetting this object to 'discard' will cause wwpLeosVplsSwitchEthCtrlProtocolNum frames arriving at the specified UNI to be discarded. Setting this to 'peer' will cause the wwpLeosVplsSwitchEthCtrlProtocolNum frame to be processed by the provider network and cause the provider network to behave as a peer. Setting this to 'tunnel' will cause the wwpLeosVplsSwitchEthCtrlProtocolNum frame to be tunneled.rw
Enumeration
.1.3.6.1.4.1.6141.2.60.28.1.1.29.1.2
wwpLeosVplsVirtualSwitchEtypeTranslationTableThis table controls the global Ethertype translation functions. Only two entries are allowed. Creating more than two entries will return an error. The control is bi-directional. Creating one entry will enable translation as the packet egresses the NNI and as it egresses the UNI port.
SEQUENCE OF WwpLeosVplsVirtualSwitchEtypeTranslationEntry
.1.3.6.1.4.1.6141.2.60.28.1.1.30
wwpLeosVplsVirtualSwitchEtypeTranslationEntryEach entry contains the Ethertype being translated and the new Ethertype that will be copied over the old Ethertype.
WwpLeosVplsVirtualSwitchEtypeTranslationEntry
.1.3.6.1.4.1.6141.2.60.28.1.1.30.1
wwpLeosVplsVirtualSwitchEtypeTranslationOriginalEtypeThis object represent the original Ethertype of the frame.ro
EtherType
.1.3.6.1.4.1.6141.2.60.28.1.1.30.1.1
wwpLeosVplsVirtualSwitchEtypeTranslationMappedEtypeThis object represent the Ethertype that will be stamped on the frame on egress and removed on ingress.rw
EtherType
.1.3.6.1.4.1.6141.2.60.28.1.1.30.1.2
wwpLeosVplsVirtualSwitchEtypeTranslationRowStatusThis object can be set to 'createandgo' to add entry in the table. This object can be set to 'destroy' to delete entry in the table. Refer to description of table entry to see how to create entries in the table.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.6141.2.60.28.1.1.30.1.3
wwpLeosVplsTunnelPairTableThis table allows creating tunnel pairs. Having a tunnel pair will force the device to accept pbt encapsulated frames on given pair of tunnels ports and not on any port. This table is only accessible in PBT mode.
SEQUENCE OF WwpLeosVplsTunnelPairEntry
.1.3.6.1.4.1.6141.2.60.28.1.1.31
wwpLeosVplsTunnelPairEntryEach entry contains the tunnel pair.
WwpLeosVplsTunnelPairEntry
.1.3.6.1.4.1.6141.2.60.28.1.1.31.1
wwpLeosVplsTunnelPairIndxThis object represent the index in the table.
INTEGER
.1.3.6.1.4.1.6141.2.60.28.1.1.31.1.1
wwpLeosVplsTunnelPairNameThis object represent the name of the pair and must be unique. This object cannot be modified once entry is created.rw
DisplayString
.1.3.6.1.4.1.6141.2.60.28.1.1.31.1.2
wwpLeosVplsTunnelPairEncapTunnelIndxThis object represent the encap tunnel that is part of this tunnel pair. This tunnel index should be valid and must exist in wwpLeosVplsEncapTunnelTable. This object cannot be modified once entry is created.rw
Integer32
.1.3.6.1.4.1.6141.2.60.28.1.1.31.1.3
wwpLeosVplsTunnelPairDecapTunnelIndxThis object represent the decap tunnel that is part of this tunnel pair. This tunnel index should be valid and must exist in wwpLeosVplsDecapTunnelTable. This object cannot be modified once entry is created.rw
Integer32
.1.3.6.1.4.1.6141.2.60.28.1.1.31.1.4
wwpLeosVplsTunnelPairRowStatusThis object can be set to 'createandgo' to add entry in the table. This object can be set to 'destroy' to delete entry in the table. Refer to description of table entry to see how to create entries in the table.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.6141.2.60.28.1.1.31.1.5
wwpLeosVplsVirtualSwitchMplsEvplMemberTableThis table is used to create mpls virtual switch subscriber port-vlan membership entry.
SEQUENCE OF WwpLeosVplsVirtualSwitchMplsEvplMemberEntry
.1.3.6.1.4.1.6141.2.60.28.1.1.32
wwpLeosVplsVirtualSwitchMplsEvplMemberEntryThis entry corresponds to single port-vlan subscriber entry in wwpLeosVplsVirtualSwitchMplsEvplMemberTable table.
WwpLeosVplsVirtualSwitchMplsEvplMemberEntry
.1.3.6.1.4.1.6141.2.60.28.1.1.32.1
wwpLeosVplsVirtualSwitchMplsEvplMemberPortIdThis object specifies the port number which is to be added as a customer facing port for the mpls virtual switch index wwpLeosVplsVirtualSwitchMplsIndx.rw
INTEGER
.1.3.6.1.4.1.6141.2.60.28.1.1.32.1.1
wwpLeosVplsVirtualSwitchMplsEvplMemberVlanIdThis object specifies the subscriber vlan attached to this mpls virtual switch index wwpLeosVplsVirtualSwitchMplsIndx. This object cannot be modified once entry is created in this table. This object can only be specified when creating entries in this table.rw
INTEGER
.1.3.6.1.4.1.6141.2.60.28.1.1.32.1.2
wwpLeosVplsVirtualSwitchMplsEvplMemberRowStatusUsed to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. To delete a row in this table, a manager must set this object to 'destroy'. If the entry exists, it will be displayed as 'active'.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.6141.2.60.28.1.1.32.1.3
wwpLeosVplsVirtualSwitchMplsEvplMemberEncapCosPolicyThis object specifies the ingress cos policy for given EVPL entry.rw
Enumeration
.1.3.6.1.4.1.6141.2.60.28.1.1.32.1.4
wwpLeosVplsVirtualSwitchMplsEvplMemberEncapFixedDot1dPriThis object specifies the ingress fixed cos attributes for given member entry. This attribute is only valid when the EncapCosPolicy is set to 'fixed'rw
INTEGER
.1.3.6.1.4.1.6141.2.60.28.1.1.32.1.5
wwpLeosVplsVirtualSwitchMplsEvplMemberSubscriberDot1dPolicyThis object configures the member policy used to decide if the subscriber frame's 'c-vlan' .1d priorty should be left alone 'leave', or remarked 'provider-inherit' to the resolved provider 's-vlan' priority. This attribute is valid when the member's SubscriberDot1Policy is 'leave' or 'provider-inherit'. If stt to 'inheritVs' the attribute is inherited from the parent virtual-switchrw
Enumeration
.1.3.6.1.4.1.6141.2.60.28.1.1.32.1.6
wwpLeosVplsVirtualSwitchMplsEvplMemberStatsTableThe (conceptual) table listing the virtual switch member stats table.
SEQUENCE OF WwpLeosVplsVirtualSwitchMplsEvplMemberStatsEntry
.1.3.6.1.4.1.6141.2.60.28.1.1.33
wwpLeosVplsVirtualSwitchMplsEvplMemberStatsEntryThe virtual switch member stats table entry index by wwpLeosVplsVirtualSwitchMplsIndx, wwpLeosVplsVirtualSwitchMplsMemberPortId and VlanId.
WwpLeosVplsVirtualSwitchMplsEvplMemberStatsEntry
.1.3.6.1.4.1.6141.2.60.28.1.1.33.1
wwpLeosVplsVirtualSwitchMplsEvplMemberRxBytesHiThis represents the total number of higher 32 bits received for given mpls virtual switch member port.ro
Counter32
.1.3.6.1.4.1.6141.2.60.28.1.1.33.1.1
wwpLeosVplsVirtualSwitchMplsEvplMemberRxBytesLoThis represents the total number of lower 32 bits received for given virtual switch member port.ro
Counter32
.1.3.6.1.4.1.6141.2.60.28.1.1.33.1.2
wwpLeosVplsVirtualSwitchEthEvplMemberTableThis table is used to create virtual switch membership entry.
SEQUENCE OF WwpLeosVplsVirtualSwitchEthEvplMemberEntry
.1.3.6.1.4.1.6141.2.60.28.1.1.34
wwpLeosVplsVirtualSwitchEthEvplMemberEntryThis entry corresponds to single entry in wwpLeosVplsVirtualSwitchEthernetEvplMemberTable table.
WwpLeosVplsVirtualSwitchEthEvplMemberEntry
.1.3.6.1.4.1.6141.2.60.28.1.1.34.1
wwpLeosVplsVirtualSwitchEthEvplMemberPortIdThis object specifies the port id associated with wwpLeosVplsVirtualSwitchEthIndx.ro
INTEGER
.1.3.6.1.4.1.6141.2.60.28.1.1.34.1.1
wwpLeosVplsVirtualSwitchEthEvplMemberVlanThis object specifies the subscriber vlan attached to this eth virtual switch index wwpLeosVplsVirtualSwitchEthIndx. This object cannot be modified one entry is created. This object can only be specified when entry is created in this table.rw
INTEGER
.1.3.6.1.4.1.6141.2.60.28.1.1.34.1.2
wwpLeosVplsVirtualSwitchEthEvplMemberRowStatusThis object can be set to 'createandgo' to add entry in the table. This object can be set to 'destroy' to delete entry in the table. Refer to description of table entry to see how to create entries in the table.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.6141.2.60.28.1.1.34.1.3
wwpLeosVplsVirtualSwitchEthEvplMemberEncapCosPolicyThis object specifies the ingress cos policy for given EVPL entry.rw
Enumeration
.1.3.6.1.4.1.6141.2.60.28.1.1.34.1.4
wwpLeosVplsVirtualSwitchEthEvplMemberEncapFixedDot1dPriThis object specifies the ingress fixed cos attributes for given member entry. This attribute is only valid when the EncapCosPolicy is set to 'fixed'rw
INTEGER
.1.3.6.1.4.1.6141.2.60.28.1.1.34.1.5
wwpLeosVplsVirtualSwitchEthEvplMemberSubscriberDot1dPolicyThis object configures the member policy used to decide if the subscriber frame's 'c-vlan' .1d priorty should be left alone 'leave', or remarked 'provider-inherit' to the resolved provider 's-vlan' priority. This attribute is valid when the member's SubscriberDot1Policy is 'leave' or 'provider-inherit'. If stt to 'inheritVs' the attribute is inherited from the parent virtual-switchrw
Enumeration
.1.3.6.1.4.1.6141.2.60.28.1.1.34.1.6
wwpLeosVplsVirtualSwitchEthEvplMemberTranslateTagSubscriber VLAN translate stamp.rw
INTEGER
.1.3.6.1.4.1.6141.2.60.28.1.1.34.1.7
wwpLeosVplsVirtualSwitchEthEvplMemberServiceVlanTpidThis object specifies the service VLAN TPID.It is currently only applicable for VS instances associated with an MPLS enabled VSrw
Enumeration
.1.3.6.1.4.1.6141.2.60.28.1.1.34.1.8
wwpLeosVplsVirtualSwitchEthEvplMemberStatsTableThe (conceptual) table listing the virtual switch member stats table.
SEQUENCE OF WwpLeosVplsVirtualSwitchEthEvplMemberStatsEntry
.1.3.6.1.4.1.6141.2.60.28.1.1.35
wwpLeosVplsVirtualSwitchEthEvplMemberStatsEntryThe virtual switch member stats table entry index by wwpLeosVplsVirtualSwitchEthIndx, wwpLeosVplsVirtualSwitchEthMemberPortId and VlanId.
WwpLeosVplsVirtualSwitchEthEvplMemberStatsEntry
.1.3.6.1.4.1.6141.2.60.28.1.1.35.1
wwpLeosVplsVirtualSwitchEthEvplMemberRxBytesHiThis represents the total number of higher 32 bits received for given virtual switch member port.ro
Counter32
.1.3.6.1.4.1.6141.2.60.28.1.1.35.1.1
wwpLeosVplsVirtualSwitchEthEvplMemberRxBytesLoThis represents the total number of lower 32 bits received for given virtual switch member port.ro
Counter32
.1.3.6.1.4.1.6141.2.60.28.1.1.35.1.2
wwpLeosVplsVirtualCircuitEthTotalStatsTableThe (conceptual) table listing the virtual circuit stats table.
SEQUENCE OF WwpLeosVplsVirtualCircuitEthTotalStatsEntry
.1.3.6.1.4.1.6141.2.60.28.1.1.36
wwpLeosVplsVirtualCircuitEthTotalStatsEntryThe ethernet virtual circuit stats table entry index by wwpLeosVplsVirtualCircuitMplsIndex.
WwpLeosVplsVirtualCircuitEthTotalStatsEntry
.1.3.6.1.4.1.6141.2.60.28.1.1.36.1
wwpLeosVplsVirtualCircuitEthTotalTxBytesHiThis represents the total number of higher 32 bits transmitted for given virtual circuit.ro
Counter32
.1.3.6.1.4.1.6141.2.60.28.1.1.36.1.1
wwpLeosVplsVirtualCircuitEthTotalTxBytesLoThis represents the total number of lower 32 bits transmitted for given virtual circuit.ro
Counter32
.1.3.6.1.4.1.6141.2.60.28.1.1.36.1.2
wwpLeosVplsVirtualCircuitEthTotalRxBytesHiThis represents the total number of higher 32 bits received for given virtual circuit.ro
Counter32
.1.3.6.1.4.1.6141.2.60.28.1.1.36.1.3
wwpLeosVplsVirtualCircuitEthTotalRxBytesLoThis represents the total number of lower 32 bits received for given virtual circuit.ro
Counter32
.1.3.6.1.4.1.6141.2.60.28.1.1.36.1.4
wwpLeosVplsVirtualCircuitMplsTotalStatsTableThe (conceptual) table listing the mpls virtual circuit stats table.
SEQUENCE OF WwpLeosVplsVirtualCircuitMplsTotalStatsEntry
.1.3.6.1.4.1.6141.2.60.28.1.1.37
wwpLeosVplsVirtualCircuitMplsTotalStatsEntryThe mpls virtual circuit stats table entry index by wwpLeosVplsVirtualCircuitMplsTotalIndex.
WwpLeosVplsVirtualCircuitMplsTotalStatsEntry
.1.3.6.1.4.1.6141.2.60.28.1.1.37.1
wwpLeosVplsVirtualCircuitMplsTotalTxBytesHiThis represents the total number of higher 32 bits transmitted for given virtual circuit.ro
Counter32
.1.3.6.1.4.1.6141.2.60.28.1.1.37.1.1
wwpLeosVplsVirtualCircuitMplsTotalTxBytesLoThis represents the total number of lower 32 bits transmitted for given virtual circuit.ro
Counter32
.1.3.6.1.4.1.6141.2.60.28.1.1.37.1.2
wwpLeosVplsVirtualCircuitMplsTotalRxBytesHiThis represents the total number of higher 32 bits received for given mpls virtual circuit.ro
Counter32
.1.3.6.1.4.1.6141.2.60.28.1.1.37.1.3
wwpLeosVplsVirtualCircuitMplsTotalRxBytesLoThis represents the total number of lower 32 bits received for given virtual circuit.ro
Counter32
.1.3.6.1.4.1.6141.2.60.28.1.1.37.1.4
wwpLeosVplsVirtualSwitchEthL2CftProtocolTableTable of Virtual Switch L2 CFT protocols.
SEQUENCE OF WwpLeosVplsVirtualSwitchEthL2CftProtocolEntry
.1.3.6.1.4.1.6141.2.60.28.1.1.49
wwpLeosVplsVirtualSwitchEthL2CftProtocolEntryVirtual Switch L2CFT protocol entry in the Virtual Switch L2CFT Protocol Table.
WwpLeosVplsVirtualSwitchEthL2CftProtocolEntry
.1.3.6.1.4.1.6141.2.60.28.1.1.49.1
wwpLeosVplsVirtualSwitchEthL2CftProtocolTypeThis object specifies a unique protocol type-index into the table.
Enumeration
.1.3.6.1.4.1.6141.2.60.28.1.1.49.1.1
wwpLeosVplsVirtualSwitchEthL2CftProtocolDispositionThis object specifies the virtual switch L2 CFT protocol action. May forward or drop frames that match this protocol at the virtual switch + RLAN layerrw
Enumeration
.1.3.6.1.4.1.6141.2.60.28.1.1.49.1.2
wwpLeosVplsVirtualSwitchEthL2CftProtocolRowStatusTo create a row in this table, a manager must set this object to 'createAndGo'. To delete the entry set this to destroy. To update this entry this object may not be set.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.6141.2.60.28.1.1.49.1.64
wwpLeosVplsVirtualSwitchCFTProtoStatsTableThe (conceptual) table listing the l2 control frame protocol stats for a given vlan.
SEQUENCE OF WwpLeosVplsVirtualSwitchCFTProtoStatsEntry
.1.3.6.1.4.1.6141.2.60.28.1.1.50
wwpLeosVplsVirtualSwitchCFTProtoStatsEntryThe layer 2 control frame protocol stats entry for the vlan.
WwpLeosVplsVirtualSwitchCFTProtoStatsEntry
.1.3.6.1.4.1.6141.2.60.28.1.1.50.1
wwpLeosVplsVirtualSwitchCFTProtoStatsEntryVirtualSwitchIndxThis object specifies the virtual switch index which is used as unique index in the table.ro
INTEGER
.1.3.6.1.4.1.6141.2.60.28.1.1.50.1.1
wwpLeosVplsVirtualSwitchCFTProtol2RxPktsSpecifies number of packets ingressed matching protocol.ro
Counter32
.1.3.6.1.4.1.6141.2.60.28.1.1.50.1.2
wwpLeosVplsVirtualSwitchCFTProtol2TunneledPktsSpecifies the number of packets that were made tunneled.ro
Counter32
.1.3.6.1.4.1.6141.2.60.28.1.1.50.1.3
wwpLeosVplsVirtualSwitchCFTProtol2PeerPktsSpecifies the number of peered packets.ro
Counter32
.1.3.6.1.4.1.6141.2.60.28.1.1.50.1.4
wwpLeosVplsVirtualSwitchCFTProtol2DiscardedPktsSpecifies the number of discarded packets.ro
Counter32
.1.3.6.1.4.1.6141.2.60.28.1.1.50.1.5
wwpLeosVplsVirtualSwitchCFTProtol2DecodedPktsSpecifies the number of packets that came in tunneled and then restored.ro
Counter32
.1.3.6.1.4.1.6141.2.60.28.1.1.50.1.6
wwpLeosVplsVirtualSwitchCFTProtol2DecodedFailuresSpecifies the number of packets that failed to 'untunnel'.ro
Counter32
.1.3.6.1.4.1.6141.2.60.28.1.1.50.1.7
wwpLeosVplsVirtualSwitchCFTProtol2TunneledSubcriberPortPktsSpecifies the number of tunneled packets received on subscriber port..ro
Counter32
.1.3.6.1.4.1.6141.2.60.28.1.1.50.1.8
wwpLeosVplsVirtualSwitchCFTProtol2ProtocolNumThis object represent the list of protocols supported by the device.ro
Enumeration
.1.3.6.1.4.1.6141.2.60.28.1.1.50.1.9
wwpLeosVplsVirtualSwitchCFTProtoTotalStatsTableThe (conceptual) table listing the l2 control frame protocol stats for a given vlan.
SEQUENCE OF WwpLeosVplsVirtualSwitchCFTProtoTotalStatsEntry
.1.3.6.1.4.1.6141.2.60.28.1.1.51
wwpLeosVplsVirtualSwitchCFTProtoTotalStatsEntryThe layer 2 control frame protocol stats entry for the vlan.
WwpLeosVplsVirtualSwitchCFTProtoTotalStatsEntry
.1.3.6.1.4.1.6141.2.60.28.1.1.51.1
wwpLeosVplsVirtualSwitchCFTProtoTotalStatsEntryVirtualSwitchIndxThis object specifies the virtual switch index which is used as unique index in the table.ro
INTEGER
.1.3.6.1.4.1.6141.2.60.28.1.1.51.1.1
wwpLeosVplsVirtualSwitchCFTProtoTotall2RxPktsSpecifies number of packets ingressed matching protocol.ro
Counter32
.1.3.6.1.4.1.6141.2.60.28.1.1.51.1.2
wwpLeosVplsVirtualSwitchCFTProtoTotall2TunneledPktsSpecifies the number of packets that were made tunneled.ro
Counter32
.1.3.6.1.4.1.6141.2.60.28.1.1.51.1.3
wwpLeosVplsVirtualSwitchCFTProtoTotall2PeerPktsSpecifies the number of peered packets.ro
Counter32
.1.3.6.1.4.1.6141.2.60.28.1.1.51.1.4
wwpLeosVplsVirtualSwitchCFTProtoTotall2DiscardedPktsSpecifies the number of discarded packets.ro
Counter32
.1.3.6.1.4.1.6141.2.60.28.1.1.51.1.5
wwpLeosVplsVirtualSwitchCFTProtoTotall2DecodedPktsSpecifies the number of packets that came in tunneled and then restored.ro
Counter32
.1.3.6.1.4.1.6141.2.60.28.1.1.51.1.6
wwpLeosVplsVirtualSwitchCFTProtoTotall2DecodedFailuresSpecifies the number of packets that failed to 'untunnel'.ro
Counter32
.1.3.6.1.4.1.6141.2.60.28.1.1.51.1.7
wwpLeosVplsVirtualSwitchCFTProtoTotall2TunneledSubcriberPortPktsSpecifies the number of tunneled packets received on subscriber port..ro
Counter32
.1.3.6.1.4.1.6141.2.60.28.1.1.51.1.8
wwpLeosVplsVirtualSwitchCFTProtoTotall2ProtocolNumThis object represent the list of protocols supported by the device.ro
Enumeration
.1.3.6.1.4.1.6141.2.60.28.1.1.51.1.9
wwpLeosVplsMIBNotificationPrefix
OBJECT IDENTIFIER
.1.3.6.1.4.1.6141.2.60.28.2
wwpLeosVplsMIBNotifications
OBJECT IDENTIFIER
.1.3.6.1.4.1.6141.2.60.28.2.0
wwpLeosVplsMIBConformance
OBJECT IDENTIFIER
.1.3.6.1.4.1.6141.2.60.28.3
wwpLeosVplsMIBCompliances
OBJECT IDENTIFIER
.1.3.6.1.4.1.6141.2.60.28.3.1
wwpLeosVplsMIBGroups
OBJECT IDENTIFIER
.1.3.6.1.4.1.6141.2.60.28.3.2
WWP-LEOS-VPLS-MIB - SNMP MIB Reference | MIBs Explorer