WWP-LEOS-PBT-MIB
AI MIB Summary
The WWP-LEOS-PBT-MIB module manages Point-to-Point Bridging Transport (PBT) services on Wind River LEOS platforms, specifically monitoring tunnel encapsulation/decapsulation parameters, virtual circuit bridge mappings, and service user frame L2 transformations. It tracks tunnel group states and triggers notifications for tunnel activation, deactivation, and reversion events to facilitate the operational oversight of PBT virtual circuits.
Added objects wwpLeosPbtVirtualCircuitDestBridgeIndex, wwpLeosPbtTunnelSwitchOverHoldTime, WwpLeosTcePbtServiceEntry wwpLeosPbtLocalBridgeNameMacMapEntry, wwpLeosTcePbtTnlGroupEntry, wwpLeosTcePbtEncapTnlEntry, wwpLeosTcePbtDecapTnlEntry, wwpLeosTcePbtServiceUserFrameL2TransformEntry. Added Notifications wwpLeosTcePbtTunnelActivateNotification, wwpLeosTcePbtTunnelDeactivateNotification, wwpLeosTcePbtTunnelReversionNotification.
Main OID:
wwpLeosPbtMIB.1.3.6.1.4.1.6141.2.60.38
172
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
172 total| Object Name |
|---|
wwpLeosPbtMIBAdded objects wwpLeosPbtVirtualCircuitDestBridgeIndex, wwpLeosPbtTunnelSwitchOverHoldTime, WwpLeosTcePbtServiceEntry wwpLeosPbtLocalBridgeNameMacMapEntry, wwpLeosTcePbtTnlGroupEntry, wwpLeosTcePbtEncapTnlEntry, wwpLeosTcePbtDecapTnlEntry, wwpLeosTcePbtServiceUserFrameL2TransformEntry. Added Notifications wwpLeosTcePbtTunnelActivateNotification, wwpLeosTcePbtTunnelDeactivateNotification, wwpLeosTcePbtTunnelReversionNotification. MODULE-IDENTITY .1.3.6.1.4.1.6141.2.60.38 |
wwpLeosPbtMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.60.38.1 |
wwpLeosPbt OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.60.38.1.1 |
wwpLeosPbtGlobalAttrs OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.60.38.1.1.1 |
wwpLeosPbtBridgeMacThis represents the provider mac address to be used as source mac during PBT encapsulation. If this object is not set then it will return default mac derived from chassis mac.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.38.1.1.1.1 |
wwpLeosPbtServiceTagETypeThis represents the etype value to be used in I-Tag (Service tag) section of PBT encapsulation. The I-tag ether type cannot be modified in native mode PBTrw OCTET STRING .1.3.6.1.4.1.6141.2.60.38.1.1.1.2 |
wwpLeosPbtTunnelTagEtypeThis represents the etype value to be used in B-Tag section of PBT encapsulation. Valid values are 8100, 9100 & 88a8rw OCTET STRING .1.3.6.1.4.1.6141.2.60.38.1.1.1.3 |
wwpLeosPbtTunnelReversionStateSetting this object will enable or disable automatic tunnel reversion from backup to primary if primary comes back up. Device will wait for wwpLeosPbtTunnelReversionHoldTime before switching that data traffic back to primary automatically.rw Enumeration .1.3.6.1.4.1.6141.2.60.38.1.1.1.4 |
wwpLeosPbtTunnelReversionHoldTimeThis object represents the hold time before data traffic on the backup tunnel will automatically revert to the primary tunnel.rw Unsigned32 UNITS "milliseconds" .1.3.6.1.4.1.6141.2.60.38.1.1.1.5 |
wwpLeosPbtTransitTunnelEtypeRemarkSetting this object will enable or disable remarking of the EtherType field in the B-Tag (tunnel) portion of PBT frames that are transiting through the device without PBT encapsulation, nor decapsulation. While enabled, applicable PBT transit frames egressing a PBT enhanced port will have their B-Tag EtherType marked with the value configured as the wwpLeosPbtTunnelTagEtype.rw Enumeration .1.3.6.1.4.1.6141.2.60.38.1.1.1.6 |
wwpLeosPbtAdminModeThis object represents PBT Admin mode. Some platforms support either non-native or native mode.rw Enumeration .1.3.6.1.4.1.6141.2.60.38.1.1.1.7 |
wwpLeosPbtOperModeThis object represents PBT Oper mode. Some platforms support either non-native or native mode.rw Enumeration .1.3.6.1.4.1.6141.2.60.38.1.1.1.8 |
wwpLeosPbtServiceVlanTpidWhen operating in native mode, this is the value of the service vlan TPID that will be used if retain-stag is set to TRUE. This is configurable only in native mode PBT. In non-native mode, this value defaults to the 0x8100 and cannot be changed. Valid values are 8100, 9100 and 88a8rw OCTET STRING .1.3.6.1.4.1.6141.2.60.38.1.1.1.9 |
wwpLeosPbtTunnelSwitchOverHoldTimeThis object represents the hold time before data traffic on backup tunnel will automatically switchover to primary tunnel.rw Unsigned32 UNITS "milliseconds" .1.3.6.1.4.1.6141.2.60.38.1.1.1.10 |
wwpLeosPbtBridgeNameMacMapTableThe (conceptual) table listing the host names to mac mapping table. To create entry in this table use SNMP multiple set operation. - wwpLeosPbtBridgeNameMacMapBridgeName must be specified. - wwpLeosPbtBridgeNameMacMapMacAddr must be specified. - wwpLeosPbtBridgeNameMacMapRowStatus must be specified. SEQUENCE OF WwpLeosPbtBridgeNameMacMapEntry .1.3.6.1.4.1.6141.2.60.38.1.1.2 |
wwpLeosPbtBridgeNameMacMapEntryThe host name to mac address table entry indexed by wwpLeosPbtBridgeNameMacMapIndex. WwpLeosPbtBridgeNameMacMapEntry .1.3.6.1.4.1.6141.2.60.38.1.1.2.1 |
wwpLeosPbtBridgeNameMacMapIndexThis represents the unique index in the table.ro INTEGER .1.3.6.1.4.1.6141.2.60.38.1.1.2.1.1 |
wwpLeosPbtBridgeNameMacMapBridgeNameThis represents the host name of the provider edge device. This object is not allowed to be modified.rw DisplayString .1.3.6.1.4.1.6141.2.60.38.1.1.2.1.2 |
wwpLeosPbtBridgeNameMacMapMacAddrThis represents the mac address of the provider edge device. This object is not allowed to be modified.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.38.1.1.2.1.3 |
wwpLeosPbtBridgeNameMacMapUseCountThis object specifies the total number of encap tunnels using this entry.ro Counter32 .1.3.6.1.4.1.6141.2.60.38.1.1.2.1.4 |
wwpLeosPbtBridgeNameMacMapRowStatusSetting this object to 'createAndGo' will create the entry in the table. Setting this object to 'destroy' will delete the entry from the table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.38.1.1.2.1.5 |
wwpLeosPbtReservedBVIDTableThe (conceptual) table listing the BVID vlans reserved for provider backbone bridge tunnels. SEQUENCE OF WwpLeosPbtReservedBVIDEntry .1.3.6.1.4.1.6141.2.60.38.1.1.3 |
wwpLeosPbtReservedBVIDEntryThe entry to reserve BVID vlans vlans for provider backbone bridge tunnels. WwpLeosPbtReservedBVIDEntry .1.3.6.1.4.1.6141.2.60.38.1.1.3.1 |
wwpLeosPbtReservedBVIDThis object is used to specify the VLAN ID to be reserved for PBT tunnels.ro Integer32 .1.3.6.1.4.1.6141.2.60.38.1.1.3.1.1 |
wwpLeosPbtReservedBVIDRowStatusSetting this object to 'createandgo' will reserve the BVID VLAN for provider backbone bridge tunnels. Setting this object to 'destroy will no longer have BVID VLAN reserved for the virtual switch.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.38.1.1.3.1.2 |
wwpLeosPbtVirtualCircuitTableThe (conceptual) table listing the virtual circuit mac in mac table. To create entry use SNMP multiple set operation because following mib objects needs to be set when creating entry in the table. - wwpLeosPbtVirtualCircuitName must be specified. - wwpLeosPbtVirtualCircuitIngressISID must be specified. - wwpLeosPbtVirtualCircuitEgressISID must be specified. - wwpLeosPbtVirtualCircuitRowStatus must be specified. - wwpLeosPbtVirtualCircuitIngressISID & wwpLeosPbtVirtualCircuitEgressISID must be the same values. SEQUENCE OF WwpLeosPbtVirtualCircuitEntry .1.3.6.1.4.1.6141.2.60.38.1.1.4 |
wwpLeosPbtVirtualCircuitEntryThe virtual circuit table entry index by wwpLeosPbtVirtualCircuitIndex. WwpLeosPbtVirtualCircuitEntry .1.3.6.1.4.1.6141.2.60.38.1.1.4.1 |
wwpLeosPbtVirtualCircuitIndexThis represents the virtual circuit mac in mac index in the table. This number should be unique in the table.ro INTEGER .1.3.6.1.4.1.6141.2.60.38.1.1.4.1.1 |
wwpLeosPbtVirtualCircuitNameThis represents the name of the mac in mac virtual circuit.rw DisplayString .1.3.6.1.4.1.6141.2.60.38.1.1.4.1.2 |
wwpLeosPbtVirtualCircuitFixedEncapTunnelIdThis represents the fixed tunnel this virtual circuit should be mapped to.rw Integer32 .1.3.6.1.4.1.6141.2.60.38.1.1.4.1.3 |
wwpLeosPbtVirtualCircuitDestBridgeIndexThis represents the provider destination host name used for this tunnel. This must be set to one of the value specified by wwpLeosPbtBridgeNameMacMapIndex. if set to 0, device will interpret it as not specified.rw Integer32 .1.3.6.1.4.1.6141.2.60.38.1.1.4.1.4 |
wwpLeosPbtVirtualCircuitIngressISIDThis represents the ingress ISID associated with the virtual circuit.rw Integer32 .1.3.6.1.4.1.6141.2.60.38.1.1.4.1.5 |
wwpLeosPbtVirtualCircuitEgressISIDThis represents the egress ISID associated with the virtual circuit.rw Integer32 .1.3.6.1.4.1.6141.2.60.38.1.1.4.1.6 |
wwpLeosPbtVirtualCircuitOperStateThis represents the operational state of this virtual circuit.ro Enumeration .1.3.6.1.4.1.6141.2.60.38.1.1.4.1.7 |
wwpLeosPbtVirtualCircuitEncapTunnelIdInUseThis represents the tunnels ID of the active tunnel this virtual circuit is currently using. This tunnel can be primary of backup tunnel.ro Integer32 .1.3.6.1.4.1.6141.2.60.38.1.1.4.1.8 |
wwpLeosPbtVirtualCircuitRowStatusUsed to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. To delete a row in this table, a manager must set this object to 'destroy' If the entry exists, it will be displayed as 'active'.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.38.1.1.4.1.9 |
wwpLeosPbtVirtualCircuitRetainSTAGWhen operating in PBT mode, writing TRUE(1) to this object forces this vc to retain the S-Tag. When FALSE(0) is written, the S-Tag will be popped on egress and push the tag on ingress.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.38.1.1.4.1.10 |
wwpLeosPbtVirtualCircuitStagWhen operating in PBT mode, this is the value of the s-tag that will be used if retain-stag is set to TRUE. This is configurable only in native mode PBT. In non-native mode, this value defaults to the RVID and cannot be changed.rw Integer32 .1.3.6.1.4.1.6141.2.60.38.1.1.4.1.11 |
wwpLeosPbtVirtualCircuitStatsTableThe (conceptual) table listing the mpls virtual circuit stats table. SEQUENCE OF WwpLeosPbtVirtualCircuitStatsEntry .1.3.6.1.4.1.6141.2.60.38.1.1.5 |
wwpLeosPbtVirtualCircuitStatsEntryThe mpls virtual circuit stats table entry index by wwpLeosPbtVirtualCircuitMplsIndex. WwpLeosPbtVirtualCircuitStatsEntry .1.3.6.1.4.1.6141.2.60.38.1.1.5.1 |
wwpLeosPbtVirtualCircuitTxBytesHiThis represents the total number of higher 32 bits transmitted for given virtual circuit.ro Counter32 .1.3.6.1.4.1.6141.2.60.38.1.1.5.1.1 |
wwpLeosPbtVirtualCircuitTxBytesLoThis represents the total number of lower 32 bits transmitted for given virtual circuit.ro Counter32 .1.3.6.1.4.1.6141.2.60.38.1.1.5.1.2 |
wwpLeosPbtVirtualCircuitRxBytesHiThis represents the total number of higher 32 bits received for given mpls virtual circuit.ro Counter32 .1.3.6.1.4.1.6141.2.60.38.1.1.5.1.3 |
wwpLeosPbtVirtualCircuitRxBytesLoThis represents the total number of lower 32 bits received for given virtual circuit.ro Counter32 .1.3.6.1.4.1.6141.2.60.38.1.1.5.1.4 |
wwpLeosPbtLocalBridgeNameMacMapTableThe (conceptual) table listing the host names to mac mapping table. To create entry in this table use SNMP multiple set operation. - wwpLeosPbtHostNameMacMapHostName must be specified. - wwpLeosPbtHostNameMacMapMacAddr must be specified. - wwpLeosPbtHostNameMacMapRowStatus must be specified. SEQUENCE OF WwpLeosPbtLocalBridgeNameMacMapEntry .1.3.6.1.4.1.6141.2.60.38.1.1.6 |
wwpLeosPbtLocalBridgeNameMacMapEntryThe host name to mac address table entry indexed by wwpLeosPbtLocalBridgeNameMacMapIndex. WwpLeosPbtLocalBridgeNameMacMapEntry .1.3.6.1.4.1.6141.2.60.38.1.1.6.1 |
wwpLeosPbtLocalBridgeNameMacMapIndexThis represents the unique index in the table.ro INTEGER .1.3.6.1.4.1.6141.2.60.38.1.1.6.1.1 |
wwpLeosPbtLocalBridgeNameMacMapBridgeNameThis represents the host name of the provider edge device. This object is not allowed to be modified.rw DisplayString .1.3.6.1.4.1.6141.2.60.38.1.1.6.1.2 |
wwpLeosPbtLocalBridgeNameMacMapMacAddrThis represents the mac address of the provider edge device. This object is not allowed to be modified.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.38.1.1.6.1.3 |
wwpLeosPbtLocalBridgeNameMacMapUseCountThis object specifies the total number of encap tunnels using this entry.ro Counter32 .1.3.6.1.4.1.6141.2.60.38.1.1.6.1.4 |
wwpLeosPbtLocalBridgeNameMacMapRowStatusSetting this object to 'createAndGo' will create the entry in the table. Setting this object to 'destroy' will delete the entry from the table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.38.1.1.6.1.5 |
wwpLeosTcePbt OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.60.38.1.1.10 |
wwpLeosTcePbtServiceTableThe (conceptual) table listing the Pbt Service table. To create entry in this table use SNMP multiple set operation. - wwpLeosTcePbtServiceName must be specified. - wwpLeosTcePbtServiceIngressIsId must be specified. - wwpLeosTcePbtServiceEgressIsId must be specified. - wwpLeosTcePbtServiceRowStatus must be specified. SEQUENCE OF WwpLeosTcePbtServiceEntry .1.3.6.1.4.1.6141.2.60.38.1.1.10.1 |
wwpLeosTcePbtServiceEntryThe Pbt Service table entry indexed by wwpLeosTcePbtServiceIndex. WwpLeosTcePbtServiceEntry .1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1 |
wwpLeosTcePbtServiceIndexThis represents the unique index in the table. Unsigned32 .1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.1 |
wwpLeosTcePbtServiceNameThis represents the Pbt service name. This object is not allowed to be modified.rw DisplayString .1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.2 |
wwpLeosTcePbtServiceOperStatusThis represents the operational state of this service.ro Enumeration .1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.3 |
wwpLeosTcePbtServiceFloodContProfileIdPbt Service Ingress Flood Container Profile Indexrw INTEGER .1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.4 |
wwpLeosTcePbtServiceFloodContProfileNamePbt Service Ingress Flood Container Profile Namero DisplayString .1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.5 |
wwpLeosTcePbtServiceVsIndexVs Index to which Pbt service is attached. To detach Pbt Service with the VS, set this object to 0.rw Unsigned32 .1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.6 |
wwpLeosTcePbtServiceVsNameVirtual Switch Name to which Pbt Service is attached.ro DisplayString .1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.7 |
wwpLeosTcePbtServiceTnlGroupIndexPbt Service Tunnel Group Indexrw Unsigned32 .1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.8 |
wwpLeosTcePbtServiceTnlGroupNamePbt Service Tunnel Group Namero DisplayString .1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.9 |
wwpLeosTcePbtServiceIngressIsIdPbt Service Ingress Isidrw Unsigned32 .1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.10 |
wwpLeosTcePbtServiceEgressIsIdPbt Service Egress-Isidrw Unsigned32 .1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.11 |
wwpLeosTcePbtServiceFixedEgressPcpPbt Service Fixed Egress Pcprw INTEGER .1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.12 |
wwpLeosTcePbtServiceFrameCosPolicyPbt Service Frame Cos Policyrw Enumeration .1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.13 |
wwpLeosTcePbtServiceFrameCosMapIndexPbt Service Frame Cos Map Indexrw INTEGER .1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.14 |
wwpLeosTcePbtServiceFrameCosMapNamePbt Service Frame Cos Map Namero DisplayString .1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.15 |
wwpLeosTcePbtServiceResolvedCosPolicyPbt Service Resolved Cos Policyrw Enumeration .1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.16 |
wwpLeosTcePbtServiceResolvedCosProfileIndexPbt Service Resolved Cos Profile Indexrw INTEGER .1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.17 |
wwpLeosTcePbtServiceResolvedCosProfileNamePbt Service Resolved Cos Profile Namero DisplayString .1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.18 |
wwpLeosTcePbtServiceIngressMeterProfileIdIngress Meter Profile Idrw INTEGER .1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.19 |
wwpLeosTcePbtServiceIngressMeterProfileNameIngress Meter Profile Namero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.20 |
wwpLeosTcePbtServiceIngressMeterPolicyIngress Meter Policyro Enumeration .1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.21 |
wwpLeosTcePbtServiceRowStatusSetting this object to 'createAndGo' will create the entry in the table. Setting this object to 'destroy' will delete the entry from the table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.64 |
wwpLeosTcePbtTnlGroupTableThe (conceptual) table listing the Pbt tunnel group table. To create entry in this table use SNMP multiple set operation. - wwpLeosTcePbtTnlGroupName must be specified. - wwpLeosTcePbtTnlGroupRowStatus must be specified. SEQUENCE OF WwpLeosTcePbtTnlGroupEntry .1.3.6.1.4.1.6141.2.60.38.1.1.10.5 |
wwpLeosTcePbtTnlGroupEntryThis represents an entry of the Pbt tunnel group table. WwpLeosTcePbtTnlGroupEntry .1.3.6.1.4.1.6141.2.60.38.1.1.10.5.1 |
wwpLeosTcePbtTnlGroupIndexThis represents the unique index in the table.ro Unsigned32 .1.3.6.1.4.1.6141.2.60.38.1.1.10.5.1.1 |
wwpLeosTcePbtTnlGroupNameThis represents the tunnel group name. This object is not allowed to be modified.rw DisplayString .1.3.6.1.4.1.6141.2.60.38.1.1.10.5.1.2 |
wwpLeosTcePbtTnlGroupSyncEnabledTBD - .rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.38.1.1.10.5.1.3 |
wwpLeosTcePbtTnlGroupOperStatusThis represents the operational state of this service.ro Enumeration .1.3.6.1.4.1.6141.2.60.38.1.1.10.5.1.4 |
wwpLeosTcePbtTnlGroupUseCountTBDro Unsigned32 .1.3.6.1.4.1.6141.2.60.38.1.1.10.5.1.5 |
wwpLeosTcePbtTnlGroupActivePairAn active PBT tunnel pair is two bidirectional tunnels, one inbound and the other outbound, between the same pair of devices paired together to represent a bidirectional PBT trunk. An inbound and an outbound tunnel must map to the same physical port of the device to qualify for the pairing.ro Unsigned32 .1.3.6.1.4.1.6141.2.60.38.1.1.10.5.1.6 |
wwpLeosTcePbtTnlGroupRevertingro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.38.1.1.10.5.1.7 |
wwpLeosTcePbtTnlGroupRowStatusSetting this object to 'createAndGo' will create the entry in the table. Setting this object to 'destroy' will delete the entry from the table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.38.1.1.10.5.1.64 |
wwpLeosTcePbtEncapTnlTableThe (conceptual) table listing the PBT encap tunnels. To create entry in this table use SNMP multiple set operation. - wwpLeosTcePbtEncapTnlName must be specified. - wwpLeosTcePbtEncapTnlRemoteBridgeIndex must be specified. - wwpLeosTcePbtEncapTnlBvId must be specified. - wwpLeosTcePbtEncapTnlPgId must be specified. - wwpLeosTcePbtEncapTnlRowStatus must be specified. SEQUENCE OF WwpLeosTcePbtEncapTnlEntry .1.3.6.1.4.1.6141.2.60.38.1.1.10.6 |
wwpLeosTcePbtEncapTnlEntry WwpLeosTcePbtEncapTnlEntry .1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1 |
wwpLeosTcePbtEncapTnlIndexThis represents the unique index in the table.ro Unsigned32 .1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.1 |
wwpLeosTcePbtEncapTnlNameThis represents the encap tunnel name. This object is not allowed to be modified.rw DisplayString .1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.2 |
wwpLeosTcePbtEncapTnlRemoteBridgeIndexrw Unsigned32 .1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.3 |
wwpLeosTcePbtEncapTnlRemoteBridgeNamero DisplayString .1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.4 |
wwpLeosTcePbtEncapTnlGroupIndexrw Unsigned32 .1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.5 |
wwpLeosTcePbtEncapTnlGroupNamero DisplayString .1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.6 |
wwpLeosTcePbtEncapTnlBvIdrw Unsigned32 .1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.7 |
wwpLeosTcePbtEncapTnlPgIdrw Unsigned32 .1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.8 |
wwpLeosTcePbtEncapTnlPortNamero DisplayString .1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.9 |
wwpLeosTcePbtEncapTnlFaultsEach Bit Represents a fault. Value 0 represents no fault. First LSB represents port Fault. Second LSB represents CFM fault and third LSB represent Admin Fault.ro Unsigned32 .1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.10 |
wwpLeosTcePbtEncapTnlAdminStaterw Enumeration .1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.11 |
wwpLeosTcePbtEncapTnlOperStatero Enumeration .1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.12 |
wwpLeosTcePbtEncapTnlFwdStatero Enumeration .1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.13 |
wwpLeosTcePbtEncapTnlPairedro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.14 |
wwpLeosTcePbtEncapTnlPairIndexrw INTEGER .1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.15 |
wwpLeosTcePbtEncapTnlPairOperStatero Enumeration .1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.16 |
wwpLeosTcePbtEncapTnlFrameCosPolicyrw Enumeration .1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.17 |
wwpLeosTcePbtEncapTnlFrameCosMapIndexrw Unsigned32 .1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.18 |
wwpLeosTcePbtEncapTnlFrameCosMapNamero DisplayString .1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.19 |
wwpLeosTcePbtEncapTnlFixedPcprw INTEGER .1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.20 |
wwpLeosTcePbtEncapTnlCfmConfiguredro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.21 |
wwpLeosTcePbtEncapTnlPairedDecapIndexro Unsigned32 .1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.22 |
wwpLeosTcePbtEncapTnlPairedDecapNamero DisplayString .1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.23 |
wwpLeosTcePbtEncapTnlWeightrw Unsigned32 .1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.24 |
wwpLeosTcePbtEncapTnlStatsEnabledro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.25 |
wwpLeosTcePbtEncapTnlLocalBridgeIndexrw Unsigned32 .1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.26 |
wwpLeosTcePbtEncapTnlLocalBridgeNamero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.27 |
wwpLeosTcePbtEncapTnlReversionToPairIndexReversion occurs to this tunnel pair index in a tunnel group and is used in the definition of trap..ro Unsigned32 .1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.28 |
wwpLeosTcePbtEncapTnlReversionFromPairIndexReversion occurs from this tunnel pair index in a tunnel group and is used in the definition of trap.ro Unsigned32 .1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.29 |
wwpLeosTcePbtEncapTnlRowStatusSetting this object to 'createAndGo' will create the entry in the table. Setting this object to 'destroy' will delete the entry from the table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.64 |
wwpLeosTcePbtDecapTnlTableThe (conceptual) table listing the PBT decap tunnels. To create entry in this table use SNMP multiple set operation. - wwpLeosTcePbtDecapTnlName must be specified. - wwpLeosTcePbtDecapTnlBvId must be specified. - wwpLeosTcePbtDecapTnlPgId must be specified. - wwpLeosTcePbtDecapTnlRowStatus must be specified. SEQUENCE OF WwpLeosTcePbtDecapTnlEntry .1.3.6.1.4.1.6141.2.60.38.1.1.10.7 |
wwpLeosTcePbtDecapTnlEntry WwpLeosTcePbtDecapTnlEntry .1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1 |
wwpLeosTcePbtDecapTnlIndexThis represents the unique index in the table. Unsigned32 .1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.1 |
wwpLeosTcePbtDecapTnlNameThis represents the decap tunnel name. This object is not allowed to be modified.rw DisplayString .1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.2 |
wwpLeosTcePbtDecapTnlRemoteBridgeIndexrw Unsigned32 .1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.3 |
wwpLeosTcePbtDecapTnlRemoteBridgeNamero DisplayString .1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.4 |
wwpLeosTcePbtDecapTnlGroupIndexrw Unsigned32 .1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.5 |
wwpLeosTcePbtDecapTnlGroupNamero DisplayString .1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.6 |
wwpLeosTcePbtDecapTnlBvIdnot allow to modifyrw Unsigned32 .1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.7 |
wwpLeosTcePbtDecapTnlPgIdnot allow to modifyrw Unsigned32 .1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.8 |
wwpLeosTcePbtDecapTnlPortNamero DisplayString .1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.9 |
wwpLeosTcePbtDecapTnlFaultsEach Bit Represents a fault. Value 0 represents no fault. First LSB represents port Fault. Second LSB represents CFM fault and value 3 represents port and CFM fault.ro Unsigned32 .1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.10 |
wwpLeosTcePbtDecapTnlOperStatero Enumeration .1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.11 |
wwpLeosTcePbtDecapTnlFwdStatero Enumeration .1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.12 |
wwpLeosTcePbtDecapTnlPairedro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.13 |
wwpLeosTcePbtDecapTnlPairIndexrw INTEGER .1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.14 |
wwpLeosTcePbtDecapTnlPairOperStatero Enumeration .1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.15 |
wwpLeosTcePbtDecapTnlResolvedCosPolicyrw Enumeration .1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.16 |
wwpLeosTcePbtDecapTnlResolvedCosMapIndexrw Unsigned32 .1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.17 |
wwpLeosTcePbtDecapTnlResolvedCosMapNamero DisplayString .1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.18 |
wwpLeosTcePbtDecapTnlCfmConfiguredro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.19 |
wwpLeosTcePbtDecapTnlPairedEncapIndexro Unsigned32 .1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.20 |
wwpLeosTcePbtDecapTnlPairedEncapNamero DisplayString .1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.21 |
wwpLeosTcePbtDecapTnlStatsEnabledro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.22 |
wwpLeosTcePbtDecapTnlRowStatusSetting this object to 'createAndGo' will create the entry in the table. Setting this object to 'destroy' will delete the entry from the table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.64 |
wwpLeosTcePbtServiceUserFrameL2TransformTableTable of pbt service user frame L2 Transform table. Two entries in this table are automatically created when a pbt service is created (one for ingress and one for egress). The entries are deleted from this table when the corresponding pbt service is deleted. Therefore, there is no rowStatus field exposed in this mib-table entry. SEQUENCE OF WwpLeosTcePbtServiceUserFrameL2TransformEntry .1.3.6.1.4.1.6141.2.60.38.1.1.10.8 |
wwpLeosTcePbtServiceUserFrameL2TransformEntryLogical Interface entry in the Logical Interfaces Table. WwpLeosTcePbtServiceUserFrameL2TransformEntry .1.3.6.1.4.1.6141.2.60.38.1.1.10.8.1 |
wwpLeosTcePbtServiceUserFrameL2TransformDirectionThis object specifies pbt service L2 Transform direction of either ingress or egress. Enumeration .1.3.6.1.4.1.6141.2.60.38.1.1.10.8.1.1 |
wwpLeosTcePbtServiceUserFrameL2TransformTagIndexThis object specifies pbt service user frame L2 Transform direction entry index. Initial deployment supports a single tag transform. As such, tag index 2 will always have tag action of none(1). INTEGER .1.3.6.1.4.1.6141.2.60.38.1.1.10.8.1.2 |
wwpLeosTcePbtServiceUserFrameL2TransformTagActionThis object specifies pbt service L2 Transform Action Type. Initial deployment supports egress/encap actions including none(1) and push(2). Initial deployment supports ingress/decap actions including none(1) and pop(3).rw Enumeration .1.3.6.1.4.1.6141.2.60.38.1.1.10.8.1.3 |
wwpLeosTcePbtServiceUserFrameL2TransformTagValueThis object specifies pbt service L2 Transform tag value.rw INTEGER .1.3.6.1.4.1.6141.2.60.38.1.1.10.8.1.4 |
wwpLeosTcePbtServiceUserFrameL2TransformTagEtypeThis object specifies the L2 transform Etype. The Etype must be specified for a push action. The Etype MAY be specified for a stamp action.rw INTEGER .1.3.6.1.4.1.6141.2.60.38.1.1.10.8.1.5 |
wwpLeosTcePbtServiceUserFrameL2TransformTagPriorityThis object specifies the L2 transform tag static or fixed priority. Use of this value depends on the L2 transform action, e.g., push or stamp, as well as the priority policy.rw INTEGER .1.3.6.1.4.1.6141.2.60.38.1.1.10.8.1.6 |
wwpLeosTcePbtServiceUserFrameL2TransformPriPolicyThis object specifies L2 Transform for the L2 tag priority.rw Enumeration .1.3.6.1.4.1.6141.2.60.38.1.1.10.8.1.7 |
wwpLeosTcePbtServiceUserFrameL2TransformUseTagValueThis object specifies to use the tag value when stamping. If the action is to push, the tag value will always be used.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.38.1.1.10.8.1.8 |
wwpLeosTcePbtServiceUserFrameL2TransformUseTagEtypeThis object specifies to use the tag etype when stamping. If the action is to push, the tag etype will always be used.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.38.1.1.10.8.1.9 |
wwpLeosPbtMIBNotificationPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.60.38.2 |
wwpLeosPbtMIBNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.60.38.2.0 |
wwpLeosPbtTunnelFaultNotificationThis notification is sent every time the tunnel becomes operationally down.deprecated NOTIFICATION-TYPE .1.3.6.1.4.1.6141.2.60.38.2.0.1 |
wwpLeosPbtTunnelReversionNotificationThis notification is sent every time backup tunnel reverts back to primary tunnel, once primary tunnel comes up. Var binding wwpLeosVplsEncapTunnelId represents the primary tunnel ID. NOTIFICATION-TYPE .1.3.6.1.4.1.6141.2.60.38.2.0.2 |
wwpLeosPbtTunnelActivateNotificationThis notification is sent every time tunnel is activated. Var binding wwpLeosVplsEncapTunnelId represents the tunnel ID. NOTIFICATION-TYPE .1.3.6.1.4.1.6141.2.60.38.2.0.3 |
wwpLeosPbtTunnelDeactivateNotificationThis notification is sent every time tunnel is de-activated. Var binding wwpLeosVplsEncapTunnelId represents the tunnel ID. NOTIFICATION-TYPE .1.3.6.1.4.1.6141.2.60.38.2.0.4 |
wwpLeosTcePbtTunnelActivateNotificationThis notification is sent everytime tunnel of the given tunnel group is activated. NOTIFICATION-TYPE .1.3.6.1.4.1.6141.2.60.38.2.0.10 |
wwpLeosTcePbtTunnelDeactivateNotificationThis notification is sent everytime tunnel of the given tunnel group is deactivated. NOTIFICATION-TYPE .1.3.6.1.4.1.6141.2.60.38.2.0.11 |
wwpLeosTcePbtTunnelReversionNotificationUpon the failure of the primary tunnel, traffic is moved over to the backup tunnel at the tunnel ingress. Tunnel reversion signifies the restoration of traffic from this backup tunnel (now active) to the primary (now standby) after the primary tunnel is restored. This notification is generated when this reversion occurs. NOTIFICATION-TYPE .1.3.6.1.4.1.6141.2.60.38.2.0.12 |
wwpLeosPbtMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.60.38.3 |
wwpLeosPbtMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.60.38.3.1 |
wwpLeosPbtMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.60.38.3.2 |
pbtGlobalConfigGroupA collection of objects providing information applicable global PBT confoguration. Unknown .1.3.6.1.4.1.6141.2.60.38.3.2.1 |
pbtBridgeNameMacMapGroupA collection of objects providing information applicable to BridgeName to mac mapping. Unknown .1.3.6.1.4.1.6141.2.60.38.3.2.2 |
pbtReserveBvidGroupA collection of objects providing information applicable to BVID reservation. Unknown .1.3.6.1.4.1.6141.2.60.38.3.2.3 |
pbtVirtualCircuitGroupA collection of objects providing information applicable to PBT virtual circuit configuration. Unknown .1.3.6.1.4.1.6141.2.60.38.3.2.4 |
pbtVirtualCircuitStatsGroupA collection of objects providing information applicable to virtual circuit stats group. Unknown .1.3.6.1.4.1.6141.2.60.38.3.2.5 |
pbtNotificationGroupsContains Notification supported for PBT. Unknown .1.3.6.1.4.1.6141.2.60.38.3.2.6 |