WWP-LEOS-CFM-MIB
AI MIB Summary
The WWP-LEOS-CFM-MIB enables configuration and monitoring of IEEE 802.1ag Connectivity Fault Management (CFM) entities, including Maintenance Domains, Maintenance Associations, and Maintenance End Points, on WWP-LEOS network devices. It facilitates the retrieval of critical fault detection metrics such as Continuity Check (CC) state, Last Link Status, and Maintenance Level (ML) to verify Layer 2 connectivity integrity.
Connectivity Fault Management (CFM) MIB for configuration and monitoring CFM
Main OID:
wwpLeosCfmMIB.1.3.6.1.4.1.6141.2.60.35
435
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
435 total| Object Name |
|---|
wwpLeosCfmMIBConnectivity Fault Management (CFM) MIB for configuration and monitoring CFM MODULE-IDENTITY .1.3.6.1.4.1.6141.2.60.35 |
wwpLeosCfmMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.60.35.1 |
wwpLeosCfmGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.60.35.1.1 |
wwpLeosCfmStateThis object allows to globally configure CFM state.rw Enumeration .1.3.6.1.4.1.6141.2.60.35.1.1.1 |
wwpLeosCfmEtherTypeThis object specifies the Ethernet type value for CFM frames.rw EthType .1.3.6.1.4.1.6141.2.60.35.1.1.2 |
wwpLeosCfmMEPHoldTimeThis object specifies the Time in ms to hold a MEP in an inactive state.rw Integer32 .1.3.6.1.4.1.6141.2.60.35.1.1.3 |
wwpLeosCfmCcmAvailableThis object specifies the current CCM available.ro Counter32 .1.3.6.1.4.1.6141.2.60.35.1.1.4 |
wwpLeosCfmY1731EtherTypeThis object specifies the Optional Alternate Ethernet type for Y.1731 frames.rw EthType .1.3.6.1.4.1.6141.2.60.35.1.1.5 |
wwpLeosCfmL2LoopDetectStateThis object allows to globally configure CFM's Layer 2 Loop
detection state. Frames received by the switch that have a
Source MAC of the the switch will be discarded.rw Enumeration .1.3.6.1.4.1.6141.2.60.35.1.1.6 |
wwpLeosCfmDot1adStrictControls compliance of processing 802.1ad encapsulated CFM frames in accordance with the 8021.ag standard.
When on (1) CFM frames containing more than one VLAN tag are forwarded as normal data frames, bypassing processing by MEPs and MIPs.
When off (2) CFM frames with multiple VLAN tags are subject to normal CFM processing.rw Enumeration .1.3.6.1.4.1.6141.2.60.35.1.1.7 |
wwpLeosCfmMipLevelEnforcementControls enforcement of a MIPs associated MD Level.
When on (1) a MIP will only process CFM messages received at its level.
When off (2) a MIP will process frames received at any level.rw Enumeration .1.3.6.1.4.1.6141.2.60.35.1.1.8 |
wwpLeosCfmMipCcmDbStateThe administrative state of the MIP CCM Database.
A MIP only records CCMs in the MIP CCM Database when this object is set to enable (1).rw Enumeration .1.3.6.1.4.1.6141.2.60.35.1.1.9 |
wwpLeosCfmLBMDefaultCountThe global default loopback message count.rwdeprecated Integer32 .1.3.6.1.4.1.6141.2.60.35.1.1.10 |
wwpLeosCfmLBMDefaultIntervalThe global default loopback message interval.rwdeprecated Integer32 .1.3.6.1.4.1.6141.2.60.35.1.1.11 |
wwpLeosCfmLBMDefaultTimeoutThe global default loopback message timeout.rwdeprecated Integer32 .1.3.6.1.4.1.6141.2.60.35.1.1.12 |
wwpLeosCfmFrameClassifierModeConfigures the hardware frame classification mode used to detect CFM
and Y.1731 frames that should be sent to the CPU for processing. Changing
this mode will cause a reboot of the device.rwdeprecated Enumeration .1.3.6.1.4.1.6141.2.60.35.1.1.13 |
wwpLeosCfmGlobalLBMDefaultCountThe global default loopback message count.rw Integer32 .1.3.6.1.4.1.6141.2.60.35.1.1.16 |
wwpLeosCfmGlobalLBMDefaultIntervalThe global default loopback message interval.rw Integer32 .1.3.6.1.4.1.6141.2.60.35.1.1.17 |
wwpLeosCfmGlobalLBMDefaultTimeoutThe global default loopback message timeout.rw Integer32 .1.3.6.1.4.1.6141.2.60.35.1.1.18 |
wwpLeosCfmGlobalFrameClassifierModeConfigures the hardware frame classification mode used to detect CFM
and Y.1731 frames that should be sent to the CPU for processing. Changing
this mode will cause a reboot of the device.rw Enumeration .1.3.6.1.4.1.6141.2.60.35.1.1.19 |
wwpLeosCfmGlobalFrameBudget OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.60.35.1.1.24 |
wwpLeosCfmGlobalControlModuleFrameBudgetControl Module Frame Budget .
Not applicable to 6.xro Counter32 .1.3.6.1.4.1.6141.2.60.35.1.1.24.1 |
wwpLeosCfmGlobalFrameBudgetTableGlobal Frame Budget Table SEQUENCE OF WwpLeosCfmGlobalFrameBudgetEntry .1.3.6.1.4.1.6141.2.60.35.1.1.24.2 |
wwpLeosCfmGlobalFrameBudgetEntryAn entry (conceptual row) in the wwpLeosCfmServiceTable.
Not applicable to 6.x WwpLeosCfmGlobalFrameBudgetEntry .1.3.6.1.4.1.6141.2.60.35.1.1.24.2.1 |
wwpLeosCfmGlobalFrameBudgetSlotIndexSlot Index Unsigned32 .1.3.6.1.4.1.6141.2.60.35.1.1.24.2.1.1 |
wwpLeosCfmGlobalFrameBudgetValueFrame budget valuero Counter32 UNITS "frames/sec" .1.3.6.1.4.1.6141.2.60.35.1.1.24.2.1.2 |
wwpLeosCfmGlobalStats OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.60.35.1.1.25 |
wwpLeosCfmStatsTotalTxThe number of frames sent.ro Counter64 .1.3.6.1.4.1.6141.2.60.35.1.1.25.1 |
wwpLeosCfmStatsTotalRxThe number of frames received.ro Counter64 .1.3.6.1.4.1.6141.2.60.35.1.1.25.2 |
wwpLeosCfmStatsTxFloodedFramesThe number of Flooded frames sent.ro Counter64 .1.3.6.1.4.1.6141.2.60.35.1.1.25.3 |
wwpLeosCfmStatsTxFloodedIgnoredStpStateThe number of flooded ignored frames sent.ro Counter64 .1.3.6.1.4.1.6141.2.60.35.1.1.25.4 |
wwpLeosCfmStatsRxTotalValidFramesThe number of valid frames received.ro Counter64 .1.3.6.1.4.1.6141.2.60.35.1.1.25.5 |
wwpLeosCfmStatsRxTotalNotValidatedFramesThe number of not validated frames received.ro Counter64 .1.3.6.1.4.1.6141.2.60.35.1.1.25.6 |
wwpLeosCfmStatsRxTotalInValidFramesThe number of invalid frames received.ro Counter64 .1.3.6.1.4.1.6141.2.60.35.1.1.25.7 |
wwpLeosCfmTotalRxInvalidMessageOverflowThe number of invalid message overflow frames received.ro Counter64 .1.3.6.1.4.1.6141.2.60.35.1.1.25.8 |
wwpLeosCfmTotalRxInvalidPortStatusTLVThe number of invalid port status TLV received.ro Counter64 .1.3.6.1.4.1.6141.2.60.35.1.1.25.9 |
wwpLeosCfmTotalRxInvalidInterfaceStatusTLVThe number of invalid interface status TLV received.ro Counter64 .1.3.6.1.4.1.6141.2.60.35.1.1.25.10 |
wwpLeosCfmTotalRxInvalidSenderIDTLVThe number of invalid sender ID TLV received.ro Counter64 .1.3.6.1.4.1.6141.2.60.35.1.1.25.11 |
wwpLeosCfmRxAdminDisableDroppedThe number of frames dropped when in admin disable mode.ro Counter64 .1.3.6.1.4.1.6141.2.60.35.1.1.25.12 |
wwpLesoCfmRxInvalidEtypeDroppedThe number of frames dropped when in admin disable mode.ro Counter64 .1.3.6.1.4.1.6141.2.60.35.1.1.25.13 |
wwpLeosCfmRxInvalidOpCodeDroppedThe number of received Invalid Opcode frames dropped.ro Counter64 .1.3.6.1.4.1.6141.2.60.35.1.1.25.14 |
wwpLeosCfmRxSTPStateNotForwardingDroppedThe number of frames dropped when system is not in STP forwarding mode.ro Counter64 .1.3.6.1.4.1.6141.2.60.35.1.1.25.15 |
wwpLeosCfmGlobalStatsClearSetting this object to clear will clear statistics globally
(Global Stats, Service Stats and Mep Stats).
This object cannot be set to none.rw Enumeration .1.3.6.1.4.1.6141.2.60.35.1.1.25.16 |
wwpLeosCfmGlobalLoopbackMsgStatsClearSetting this object to clear will clear Loopback Statistics
globally(Global stats, Service Stats and Mep Stats).rw Enumeration .1.3.6.1.4.1.6141.2.60.35.1.1.25.17 |
wwpLeosCfmGlobalLinkTraceMsgStatsClearSetting this object to clear will clear Link Trace Statistics
globally(Global stats, Service Stats and Mep Stats).rw Enumeration .1.3.6.1.4.1.6141.2.60.35.1.1.25.18 |
wwpLeosCfmGlobalDelayMeasurementMsgStatsClearSetting this object to clear will clear Delay Measurement
Statistics globally(Global stats, Service Stats and Mep Stats).rw Enumeration .1.3.6.1.4.1.6141.2.60.35.1.1.25.19 |
wwpLeosCfmGlobalLossMeasurementMsgStatsClearSetting this object to clear will clear Loss Measurement
Statistics globally(Global stats, Service Stats and Mep Stats).rw Enumeration .1.3.6.1.4.1.6141.2.60.35.1.1.25.20 |
wwpLeosCfmTotalRxDropBlockedOppositeMepThe number of received Blocked by Opposite Mep frames dropped.ro Counter64 .1.3.6.1.4.1.6141.2.60.35.1.1.25.21 |
wwpLeosCfmGlobalCCMStats OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.60.35.1.1.25.26 |
wwpLeosCfmTotalTxCCMThe total number of CCM frames sent.ro Counter64 .1.3.6.1.4.1.6141.2.60.35.1.1.25.26.1 |
wwpLeosCfmTotalTxCCMFloodedThe total number of flooded CCM frames sent.ro Counter64 .1.3.6.1.4.1.6141.2.60.35.1.1.25.26.2 |
wwpLeosCfmTotalRxValidCCMThe number of valid frames received.ro Counter64 .1.3.6.1.4.1.6141.2.60.35.1.1.25.26.3 |
wwpLeosCfmTotalRxCCMInSequenceThe number of CCM frames received in sequence.ro Counter64 .1.3.6.1.4.1.6141.2.60.35.1.1.25.26.4 |
wwpLeosCfmTotalRxCCMSequenceErrorThe number of errored CCM frames received in sequence.ro Counter64 .1.3.6.1.4.1.6141.2.60.35.1.1.25.26.5 |
wwpLeosCfmTotalCCMRxMDLevelXconThe number of MD Level CFM frames received.ro Counter64 .1.3.6.1.4.1.6141.2.60.35.1.1.25.26.6 |
wwpLeosCfmTotalCCMRxMAIDXconThe number of MAID Xcon CFM frames received.ro Counter64 .1.3.6.1.4.1.6141.2.60.35.1.1.25.26.7 |
wwpLeosCfmTotalRxCCMErrorOnMepIdThe number of frames dropped when in admin disable mode.ro Counter64 .1.3.6.1.4.1.6141.2.60.35.1.1.25.26.8 |
wwpLeosCfmTotalRxCCMIntervalErrorThe number of interval error frames received.ro Counter64 .1.3.6.1.4.1.6141.2.60.35.1.1.25.26.9 |
wwpLeosCfmTotalRxInvalidCCMThe number of invalid CCM frames received.ro Counter64 .1.3.6.1.4.1.6141.2.60.35.1.1.25.26.10 |
wwpLeosCfmGlobalLoopbackStats OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.60.35.1.1.25.27 |
wwpLeosCfmTotalTxLBMThe number of Loopback messages sent.ro Counter64 .1.3.6.1.4.1.6141.2.60.35.1.1.25.27.1 |
wwpLeosCfmTotalTxLBRThe total number of Loopback Replies frames sent.ro Counter64 .1.3.6.1.4.1.6141.2.60.35.1.1.25.27.2 |
wwpLeosCfmTotalRxInOderLBRThe total number of In order LBR frames received.ro Counter64 .1.3.6.1.4.1.6141.2.60.35.1.1.25.27.3 |
wwpLeosCfmTotalRxOOOLBRThe number of Out of Order LBR frames received.ro Counter64 .1.3.6.1.4.1.6141.2.60.35.1.1.25.27.4 |
wwpLeosCfmTotalRxContentMismatchLBRThe number of Content Mismatch LBR frames received.ro Counter64 .1.3.6.1.4.1.6141.2.60.35.1.1.25.27.5 |
wwpLeosCfmTotalRxUnexpectedLBRThe number of unexpected LBR frames received.ro Counter64 .1.3.6.1.4.1.6141.2.60.35.1.1.25.27.6 |
wwpLeosCfmTotalRxInvalidLBRThe number of invalid LBR frames received.ro Counter64 .1.3.6.1.4.1.6141.2.60.35.1.1.25.27.7 |
wwpLeosCfmTotalRxvalidLBMThe number of valid LBM frames received.ro Counter64 .1.3.6.1.4.1.6141.2.60.35.1.1.25.27.8 |
wwpLeosCfmTotalRxInvalidLBMThe number of invalid LBM frames received.ro Counter64 .1.3.6.1.4.1.6141.2.60.35.1.1.25.27.9 |
wwpLeosCfmGlobalLinkTraceStats OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.60.35.1.1.25.28 |
wwpLeosCfmTotalTxLTMThe number of LTM frames sent.ro Counter64 .1.3.6.1.4.1.6141.2.60.35.1.1.25.28.1 |
wwpLeosCfmTotalTxLTRThe total number of LTR frames sent.ro Counter64 .1.3.6.1.4.1.6141.2.60.35.1.1.25.28.2 |
wwpLeosCfmTotalRxValidLTMThe total number of LTM frames received.ro Counter64 .1.3.6.1.4.1.6141.2.60.35.1.1.25.28.3 |
wwpLeosCfmTotalRxValidLTRThe total number of Valid LTR frames received.ro Counter64 .1.3.6.1.4.1.6141.2.60.35.1.1.25.28.4 |
wwpLeosCfmTotalRxUnexpectedLTRThe total number of unexpected LTR frames received.ro Counter64 .1.3.6.1.4.1.6141.2.60.35.1.1.25.28.5 |
wwpLeosCfmTotalRxInvalidLTRThe total number of Invalid LTR frames received.ro Counter64 .1.3.6.1.4.1.6141.2.60.35.1.1.25.28.6 |
wwpLeosCfmInvalidLTRRelayActionThe total number of Invalid LTR Action.ro Counter64 .1.3.6.1.4.1.6141.2.60.35.1.1.25.28.7 |
wwpLeosCfmTotalRxInvalidLTMThe total number of Invalid LTM frames received.ro Counter64 .1.3.6.1.4.1.6141.2.60.35.1.1.25.28.8 |
wwpLeosCfmRxUnresolvedLTMThe total number of Unresolved LTM frames received.ro Counter64 .1.3.6.1.4.1.6141.2.60.35.1.1.25.28.9 |
wwpLeosCfmGlobalDelayMeasurementStats OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.60.35.1.1.25.29 |
wwpLeosCfmTotalTxDMMThe total number of Delay Measurements messages sent.ro Counter64 .1.3.6.1.4.1.6141.2.60.35.1.1.25.29.1 |
wwpLeosCfmTotalTxDMRThe total number of Delay Measurements Reply sent.ro Counter64 .1.3.6.1.4.1.6141.2.60.35.1.1.25.29.2 |
wwpLeosCfmTotalRxDMMThe total number of Delay Measurements Messages received.ro Counter64 .1.3.6.1.4.1.6141.2.60.35.1.1.25.29.3 |
wwpLeosCfmTotalRxDMRThe total number of Delay Measurements Reply received.ro Counter64 .1.3.6.1.4.1.6141.2.60.35.1.1.25.29.4 |
wwpLeosCfmGlobalLossMeasurementStats OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.60.35.1.1.25.30 |
wwpLeosCfmTotalTxLMMThe total number of Loss Measurements messages sent.ro Counter64 .1.3.6.1.4.1.6141.2.60.35.1.1.25.30.1 |
wwpLeosCfmTotalTxLMRThe total number of Loss Measurements Reply frames sent.ro Counter64 .1.3.6.1.4.1.6141.2.60.35.1.1.25.30.2 |
wwpLeosCfmTotalRxLMMThe total number of LMM received.ro Counter64 .1.3.6.1.4.1.6141.2.60.35.1.1.25.30.3 |
wwpLeosCfmTotalRxLMRThe total number of LMR received.ro Counter64 .1.3.6.1.4.1.6141.2.60.35.1.1.25.30.4 |
wwpLeosCfmService OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.60.35.1.2 |
wwpLeosCfmServiceTableThe (conceptual) table listing the configuration
parameters for the CFM Service Table.
To create an entry in this table the following criteria
must be followed:
wwpLeosCfmServiceType must be specified.
wwpLeosCfmServiceValue must be specified.
wwpLeosCfmServiceName must be specified.
wwpLeosCfmServiceStatus must be set to createAndGo. SEQUENCE OF WwpLeosCfmServiceEntry .1.3.6.1.4.1.6141.2.60.35.1.2.1 |
wwpLeosCfmServiceEntryAn entry (conceptual row) in the wwpLeosCfmServiceTable. WwpLeosCfmServiceEntry .1.3.6.1.4.1.6141.2.60.35.1.2.1.1 |
wwpLeosCfmServiceIndexA unique identifier for CFM service entry.rw Unsigned32 .1.3.6.1.4.1.6141.2.60.35.1.2.1.1.1 |
wwpLeosCfmServiceTypeThis object is used to specify the service type.
Interpretation of wwpLeosCfmServiceValue depends on the value of this MIB object.
This MIB object along with wwpLeosCfmServiceValue must be unique for each entry in this tablerw Enumeration .1.3.6.1.4.1.6141.2.60.35.1.2.1.1.2 |
wwpLeosCfmServiceValueThis object is used to specify the service value.
Interpretation of this object depends on the value of wwpLeosCfmServiceType.
This MIB object along with wwpLeosCfmServiceType must be unique for each entry in this tablerw INTEGER .1.3.6.1.4.1.6141.2.60.35.1.2.1.1.3 |
wwpLeosCfmServiceAdminStateThis object specifies the admin state of CFM for this service type.rw Enumeration .1.3.6.1.4.1.6141.2.60.35.1.2.1.1.4 |
wwpLeosCfmServiceOperStateThe operational state of CFM for this service type.ro Enumeration .1.3.6.1.4.1.6141.2.60.35.1.2.1.1.5 |
wwpLeosCfmServiceAlarmTimeThis MIB object allows to set the time interval that a service fault detected
by wwpLeosCfmServiceType must be present prior to triggering a fault alarm.rw INTEGER .1.3.6.1.4.1.6141.2.60.35.1.2.1.1.6 |
wwpLeosCfmServiceCCMIntervalThis MIB object allows to set the CCM transmission interval index for the service specified by wwpLeosCfmServiceType.
This determines the frequency at which CCMs are transmitted. The length of the interval increases exponentially
with the index value. Setting the interval to 0 disables CCM transmission from all MEPs in the MA.rw INTEGER .1.3.6.1.4.1.6141.2.60.35.1.2.1.1.7 |
wwpLeosCfmServiceNameThis MIB object allows to set the CFM service name.rw DisplayString .1.3.6.1.4.1.6141.2.60.35.1.2.1.1.9 |
wwpLeosCfmServiceMdLevelThis MIB object sets the CFM service level which associates it with a Maintenance Domain.rw INTEGER .1.3.6.1.4.1.6141.2.60.35.1.2.1.1.10 |
wwpLeosCfmServiceResetTimeThis MIB object set the time interval during which no service faults can be detected
before the service will reset a fault alarm.rw INTEGER .1.3.6.1.4.1.6141.2.60.35.1.2.1.1.11 |
wwpLeosCfmServiceLastFaultCCMThis MIB object shows last received CCM fault.ro CfmDisplayString .1.3.6.1.4.1.6141.2.60.35.1.2.1.1.12 |
wwpLeosCfmServiceRMEPFailureFlagThis MIB object shows the RMEP failure flag.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.35.1.2.1.1.13 |
wwpLeosCfmServiceCCMErrorFlagThis MIB object shows the CCM Error flag.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.35.1.2.1.1.14 |
wwpLeosCfmServiceCrossConnectErrorFlagThis MIB object shows the cross-connect Error flag.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.35.1.2.1.1.15 |
wwpLeosCfmServiceNumMEPThis MIB object shows Number of MEPs.ro Counter32 .1.3.6.1.4.1.6141.2.60.35.1.2.1.1.16 |
wwpLeosCfmServiceNumRemoteMEPThis MIB object shows the Number of Remote MEPs.ro Counter32 .1.3.6.1.4.1.6141.2.60.35.1.2.1.1.17 |
wwpLeosCfmServiceNumActiveMEPThis MIB object shows the Number of active MEPs.ro Counter32 .1.3.6.1.4.1.6141.2.60.35.1.2.1.1.18 |
wwpLeosCfmServiceStatusUsed to manage the creation and deletion of the
conceptual rows in this table.
To create a row in this table, a manager must
set this object to 'createAndGo'. To delete a row in this
table, set this object to 'destroy'.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.35.1.2.1.1.19 |
wwpLeosCfmServiceNextMepIdThis mib object specifies the next MEP Id for given service.rw Unsigned32 .1.3.6.1.4.1.6141.2.60.35.1.2.1.1.20 |
wwpLeosCfmServiceAlarmPriorityThis mib object specifies the alarm priority for given service.rw Unsigned32 .1.3.6.1.4.1.6141.2.60.35.1.2.1.1.21 |
wwpLeosCfmServiceNumCCMForFaultThe number of CCM frames that must go undelivered
for the service to be declared as operationally down.rw Unsigned32 .1.3.6.1.4.1.6141.2.60.35.1.2.1.1.22 |
wwpLeosCfmServiceDMMIntervalThis MIB object allows to set the DMM transmission interval index for the service specified by wwpLeosCfmServiceType.
This determines the frequency at which DMMs are transmitted. The length of the interval increases exponentially
with the index value.rw INTEGER .1.3.6.1.4.1.6141.2.60.35.1.2.1.1.23 |
wwpLeosCfmServiceLMMIntervalThis MIB object allows to set the LMM transmission interval index for the service specified by wwpLeosCfmServiceType.
This determines the frequency at which LMMs are transmitted. The length of the interval increases exponentially
with the index value.rw INTEGER .1.3.6.1.4.1.6141.2.60.35.1.2.1.1.24 |
wwpLeosCfmServiceCCMLossStatsStateThis object specifies the operational state of CCM loss accounting
for RMEPs learned by this service type.rw Enumeration .1.3.6.1.4.1.6141.2.60.35.1.2.1.1.25 |
wwpLeosCfmServiceCCMLossBucketIntervalThis object specifies the interval in minutes that each of the 96
CCM loss history buckets spans. The default is 15 minutes, which
means the default history covers 24 hours.rw INTEGER .1.3.6.1.4.1.6141.2.60.35.1.2.1.1.26 |
wwpLeosCfmServiceRemoteMepDiscoveryThis object specifies whether remote meps should be discovered automatically.
if this object is set to enable it will cause remote meps to be discovered
automatically and if set to disable will not discover rempote meps.rw Enumeration .1.3.6.1.4.1.6141.2.60.35.1.2.1.1.27 |
wwpLeosCfmServiceY1731Specifies if y1731 is enabled for the service.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.35.1.2.1.1.28 |
wwpLeosCfmServiceAcceleratedSpecifies if the service is supported in hardware .rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.35.1.2.1.1.49 |
wwpLeosCfmServiceTlvSenderIdTypeThis mib object specifies the Sender Id Tlv Type.rw Enumeration .1.3.6.1.4.1.6141.2.60.35.1.2.1.1.50 |
wwpLeosCfmServiceRMEPHoldTimeThis mib object specifies the Remote MEP hold time in milliseconds.rw Unsigned32 .1.3.6.1.4.1.6141.2.60.35.1.2.1.1.51 |
wwpLeosCfmServiceCCMTxStateThis mib object specifies the admin state of the CCM Tx.rw Enumeration .1.3.6.1.4.1.6141.2.60.35.1.2.1.1.52 |
wwpLeosCfmServicePortStatusFlagThis mib object shows the Port Status defect flag.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.35.1.2.1.1.53 |
wwpLeosCfmServiceRDIFlagThis mib object shows the RDI defect flag.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.35.1.2.1.1.54 |
wwpLeosCfmServiceInstabilityFlagThis mib object shows the Instability defect flag.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.35.1.2.1.1.55 |
wwpLeosCfmServiceRMEPAgingControls automatic Remote MEP aging for the service.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.35.1.2.1.1.56 |
wwpLeosCfmServiceDefaultMEPTypeThis object is used to specify the type of all MEP's created for
the service. Services of type PBT must specify a MEP type of 'down'.rwdeprecated Enumeration .1.3.6.1.4.1.6141.2.60.35.1.2.1.1.57 |
wwpLeosCfmServiceMAIDThe MAID send by CCM's associated with the service.rodeprecated CfmMAID .1.3.6.1.4.1.6141.2.60.35.1.2.1.1.58 |
wwpLeosCfmServiceMdIndexThe unique index in the Maint Domain table.rwdeprecated Unsigned32 .1.3.6.1.4.1.6141.2.60.35.1.2.1.1.59 |
wwpLeosCfmServiceMaintAssocNameTypeThe type (and thereby format) of the Maintenance Association Name.rwdeprecated Dot1agCfmMaintAssocNameType .1.3.6.1.4.1.6141.2.60.35.1.2.1.1.60 |
wwpLeosCfmServiceMaintAssocNameThe Short Maintenance Association name. The type/format of
this object is determined by the value of the
dot1agCfmMaNetNameType object.rwdeprecated Dot1agCfmMaintAssocName .1.3.6.1.4.1.6141.2.60.35.1.2.1.1.61 |
wwpLeosCfmServiceMulticastDaSpecifies if multicast DA mode is enabled for the service.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.35.1.2.1.1.65 |
wwpLeosCfmServiceChargedAgainstGlobalFrameBudgetThis MIB object reflects if this service is charged against
the global frame budget.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.35.1.2.1.1.71 |
wwpLeosCfmServiceCfmDefaultMEPTypeThis object is used to specify the type of all MEP's created for
the service. Services of type PBT must specify a MEP type of 'down'.rw Enumeration .1.3.6.1.4.1.6141.2.60.35.1.2.1.1.72 |
wwpLeosCfmServiceCfmMAIDThe MAID send by CCM's associated with the service.ro CfmMAID .1.3.6.1.4.1.6141.2.60.35.1.2.1.1.73 |
wwpLeosCfmServiceCfmMdIndexThe unique index in the Maint Domain table.rw Unsigned32 .1.3.6.1.4.1.6141.2.60.35.1.2.1.1.74 |
wwpLeosCfmServiceCfmMaintAssocNameTypeThe type (and thereby format) of the Maintenance Association Name.rw Dot1agCfmMaintAssocNameType .1.3.6.1.4.1.6141.2.60.35.1.2.1.1.75 |
wwpLeosCfmServiceCfmMaintAssocNameThe Short Maintenance Association name. The type/format of
this object is determined by the value of the
dot1agCfmMaNetNameType object.rw Dot1agCfmMaintAssocName .1.3.6.1.4.1.6141.2.60.35.1.2.1.1.76 |
wwpLeosCfmServiceCfmControlModuleFrameBudgetCfm Frame budget for control module for the given service.ro Counter32 .1.3.6.1.4.1.6141.2.60.35.1.2.1.1.77 |
wwpLeosCfmServiceFaultTableThe (conceptual) table used for Fault Traps.
The last CFM error that occurred is reported. SEQUENCE OF WwpLeosCfmServiceFaultEntry .1.3.6.1.4.1.6141.2.60.35.1.2.2 |
wwpLeosCfmServiceFaultEntryAn entry (conceptual row) in the wwpLeosCfmServiceFaultTable. WwpLeosCfmServiceFaultEntry .1.3.6.1.4.1.6141.2.60.35.1.2.2.1 |
wwpLeosCfmServiceFaultTimeThis object is used to specify the Time at which the fault occurred.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.6141.2.60.35.1.2.2.1.1 |
wwpLeosCfmServiceFaultTypeThis object is used to specify the type of fault.ro Enumeration .1.3.6.1.4.1.6141.2.60.35.1.2.2.1.2 |
wwpLeosCfmServiceFaultDescThis object is used to specify the description of the fault.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.35.1.2.2.1.3 |
wwpLeosCfmServiceFaultMepThis object is used to specify the Mepid of MEP reporting the fault.ro INTEGER .1.3.6.1.4.1.6141.2.60.35.1.2.2.1.4 |
wwpLeosCfmServiceVlanThis object is used to specify the service VLAN.ro INTEGER .1.3.6.1.4.1.6141.2.60.35.1.2.2.1.5 |
wwpLeosCfmServiceVsPbtNameThis object represents the virtual switch or Pbt tunnel assigned to the given service.ro DisplayString .1.3.6.1.4.1.6141.2.60.35.1.2.2.1.50 |
wwpLeosCfmServiceStatisticsTableThe (conceptual) table listing the configuration
parameters for the CFM Service Table.
To create an entry in this table, the following criteria must be met:
wwpLeosCfmServiceType must be specified.
wwpLeosCfmServiceValue must be specified.
wwpLeosCfmServiceName must be specified.
wwpLeosCfmServiceStatus must be set to createAndGo. SEQUENCE OF WwpLeosCfmServiceStatisticsEntry .1.3.6.1.4.1.6141.2.60.35.1.2.3 |
wwpLeosCfmServiceStatisticsEntryAn entry (conceptual row) in the wwpLeosCfmServiceTable. WwpLeosCfmServiceStatisticsEntry .1.3.6.1.4.1.6141.2.60.35.1.2.3.1 |
wwpLeosCfmServiceRxTotalValidFramesThe total valid Frames received.ro Counter64 .1.3.6.1.4.1.6141.2.60.35.1.2.3.1.1 |
wwpLeosCfmServiceRxTotalInvalidFramesThe total invalid Frames received.ro Counter64 .1.3.6.1.4.1.6141.2.60.35.1.2.3.1.2 |
wwpLeosCfmServiceInvalidMessageOverflowThe total invalid message overflow Frames.ro Counter64 .1.3.6.1.4.1.6141.2.60.35.1.2.3.1.3 |
wwpLeosCfmServiceInvalidPortStatusTLVThe total invalid Port Status TLVs Frames.ro Counter64 .1.3.6.1.4.1.6141.2.60.35.1.2.3.1.4 |
wwpLeosCfmServiceInvalidInterfaceStatusTLVThe invalid interface Status TLVs Frames.ro Counter64 .1.3.6.1.4.1.6141.2.60.35.1.2.3.1.5 |
wwpLeosCfmServiceInvalidSenderIDTLVThe invalid SenderId TLV.ro Counter64 .1.3.6.1.4.1.6141.2.60.35.1.2.3.1.6 |
wwpLeosCfmServiceTxTotalCCMThe total CCM sent.ro Counter64 .1.3.6.1.4.1.6141.2.60.35.1.2.3.1.7 |
wwpLeosCfmServiceTotalRxValidCCMThe total valid CCM received.ro Counter64 .1.3.6.1.4.1.6141.2.60.35.1.2.3.1.8 |
wwpLeosCfmServiceTotalRxInSequenceCCMThe total CCM in sequence received.ro Counter64 .1.3.6.1.4.1.6141.2.60.35.1.2.3.1.9 |
wwpLeosCfmServiceTotalRxNotInSequenceCCMThe total CCM not in sequence received.ro Counter64 .1.3.6.1.4.1.6141.2.60.35.1.2.3.1.10 |
wwpLeosCfmServiceTotalRxMDLevelXconCCMThe total MD Level Xcon CCM received.ro Counter64 .1.3.6.1.4.1.6141.2.60.35.1.2.3.1.11 |
wwpLeosCfmServiceTotalRxMAIDXconCCMThe total MAID Xcon CCM received.ro Counter64 .1.3.6.1.4.1.6141.2.60.35.1.2.3.1.12 |
wwpLeosCfmServiceTotalRxMEPIDErrorCCMThe total MEPID Error CCM received.ro Counter64 .1.3.6.1.4.1.6141.2.60.35.1.2.3.1.13 |
wwpLeosCfmServiceTotalRxCCMIntervalErrorCCMThe total Interval Error CCM received.ro Counter64 .1.3.6.1.4.1.6141.2.60.35.1.2.3.1.14 |
wwpLeosCfmServiceTotalRxInvalidCCMThe total Internal Error CCM received.ro Counter64 .1.3.6.1.4.1.6141.2.60.35.1.2.3.1.15 |
wwpLeosCfmServiceTotalTxLTMThe total Internal Error CCM received.ro Counter64 .1.3.6.1.4.1.6141.2.60.35.1.2.3.1.16 |
wwpLeosCfmServiceTotalTxLTRThe total Internal Error CCM received.ro Counter64 .1.3.6.1.4.1.6141.2.60.35.1.2.3.1.17 |
wwpLeosCfmServiceTotalRxValidLTRThe valid LTR Received.ro Counter64 .1.3.6.1.4.1.6141.2.60.35.1.2.3.1.18 |
wwpLeosCfmServiceTotalRxUnexpectedLTRThe unexpected LTR received.ro Counter64 .1.3.6.1.4.1.6141.2.60.35.1.2.3.1.19 |
wwpLeosCfmServiceTotalRxInvalidLTRThis object specifies invalid LTR received.ro Counter64 .1.3.6.1.4.1.6141.2.60.35.1.2.3.1.20 |
wwpLeosCfmServiceTotalRxInvalidRelayActionLTRThe total invalid relay action LTR received.ro Counter64 .1.3.6.1.4.1.6141.2.60.35.1.2.3.1.21 |
wwpLeosCfmServiceTotalRxValidLTMThe valid LTM received.ro Counter64 .1.3.6.1.4.1.6141.2.60.35.1.2.3.1.22 |
wwpLeosCfmServiceTotalTxInvalidLTMThe total invalid LTM sent.ro Counter64 .1.3.6.1.4.1.6141.2.60.35.1.2.3.1.23 |
wwpLeosCfmServiceTotalTxLBMThe total LBM sent.ro Counter64 .1.3.6.1.4.1.6141.2.60.35.1.2.3.1.24 |
wwpLeosCfmServiceTotalTxLBRThe total LBR sent.ro Counter64 .1.3.6.1.4.1.6141.2.60.35.1.2.3.1.25 |
wwpLeosCfmServiceTotalRxInorderLBRThe total in order LBR received.ro Counter64 .1.3.6.1.4.1.6141.2.60.35.1.2.3.1.26 |
wwpLeosCfmServiceTotalRxOutOfOrderLBRThe toal out of order LBR received.ro Counter64 .1.3.6.1.4.1.6141.2.60.35.1.2.3.1.27 |
wwpLeosCfmServiceTotalRxContentMismatchLBRThe total content mismatch LBR received.ro Counter64 .1.3.6.1.4.1.6141.2.60.35.1.2.3.1.28 |
wwpLeosCfmServiceTotalRxUnexpectedLBRThe total unexpected LBR received.ro Counter64 .1.3.6.1.4.1.6141.2.60.35.1.2.3.1.29 |
wwpLeosCfmServiceTotalRxInvalidLBRThe invalid LBR received.ro Counter64 .1.3.6.1.4.1.6141.2.60.35.1.2.3.1.30 |
wwpLeosCfmServiceTotalRxValidLBMThe valid LBM received.ro Counter64 .1.3.6.1.4.1.6141.2.60.35.1.2.3.1.31 |
wwpLeosCfmServiceTotalRxInvalidLBMThe total invalid LBM received.ro Counter64 .1.3.6.1.4.1.6141.2.60.35.1.2.3.1.32 |
wwpLeosCfmServiceTotalTxDMMThe total DMM sent.ro Counter64 .1.3.6.1.4.1.6141.2.60.35.1.2.3.1.33 |
wwpLeosCfmServiceTotalTxDMRThe total DMR sent.ro Counter64 .1.3.6.1.4.1.6141.2.60.35.1.2.3.1.34 |
wwpLeosCfmServiceTotalRxDMMThe total DMM received.ro Counter64 .1.3.6.1.4.1.6141.2.60.35.1.2.3.1.35 |
wwpLeosCfmServiceTotalRxDMRThe total DMR received.ro Counter64 .1.3.6.1.4.1.6141.2.60.35.1.2.3.1.36 |
wwpLeosCfmServiceTotalTxLMMThe total LMM sent.ro Counter64 .1.3.6.1.4.1.6141.2.60.35.1.2.3.1.37 |
wwpLeosCfmServiceTotalTxLMRThe total LMR sent.ro Counter64 .1.3.6.1.4.1.6141.2.60.35.1.2.3.1.38 |
wwpLeosCfmServiceTotalRxLMMThe total LMM received.ro Counter64 .1.3.6.1.4.1.6141.2.60.35.1.2.3.1.39 |
wwpLeosCfmServiceTotalRxLMRThe total LMR received.ro Counter64 .1.3.6.1.4.1.6141.2.60.35.1.2.3.1.40 |
wwpLeosCfmServiceStatsClearSetting this object to clear will clear statististics for the given service index.
This object can't be set to nonerw Enumeration .1.3.6.1.4.1.6141.2.60.35.1.2.3.1.41 |
wwpLeosCfmServiceClearStatsSetting this object to clear(1) will clear all service level statistics for all services
in addition within each mep.rw Enumeration .1.3.6.1.4.1.6141.2.60.35.1.2.4 |
wwpLeosCfmMIP OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.60.35.1.3 |
wwpLeosCfmMipTableThe (conceptual) table listing the configuration
parameters for the CFM MIP Table.
This table is not applicable if wwpLeosCfmServiceType is set to pbtTunnel.
Any Get/Set/Walk will return error. SEQUENCE OF WwpLeosCfmMipEntry .1.3.6.1.4.1.6141.2.60.35.1.3.1 |
wwpLeosCfmMipEntryAn entry (conceptual row) in the wwpLeosCfmMipTable. WwpLeosCfmMipEntry .1.3.6.1.4.1.6141.2.60.35.1.3.1.1 |
wwpLeosCfmMipVidThis object is used as index in the table and is used to specify the
VLAN service type for which intermediate maintenance points can be created.ro INTEGER .1.3.6.1.4.1.6141.2.60.35.1.3.1.1.1 |
wwpLeosCfmMipPortThis object is used as index in the table and is used to specify the
port.ro INTEGER .1.3.6.1.4.1.6141.2.60.35.1.3.1.1.2 |
wwpLeosCfmMipLevelThis object is used to specify the level attribute.rw INTEGER .1.3.6.1.4.1.6141.2.60.35.1.3.1.1.3 |
wwpLeosCfmMipStatusUsed to manage the creation and deletion of the
conceptual rows in this table.
To create a row in this table, a manager must
set this object to 'createAndGo'. To delete a row in this
table, set it to 'destroy'.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.35.1.3.1.1.4 |
wwpLeosCfmLinkTrace OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.60.35.1.4 |
wwpLeosCfmLinkTraceMsgTableThe (conceptual) table listing the configuration
parameters for the LinkTraceMsg.
Not applicable to 6.x SEQUENCE OF WwpLeosCfmLinkTraceMsgEntry .1.3.6.1.4.1.6141.2.60.35.1.4.1 |
wwpLeosCfmLinkTraceMsgEntryAn entry (conceptual row) in the wwpLeosCfmLinkTraceMsgTable. WwpLeosCfmLinkTraceMsgEntry .1.3.6.1.4.1.6141.2.60.35.1.4.1.1 |
wwpLeosCfmLinkTraceMsgPortIdThis object is used to specify the port. INTEGER .1.3.6.1.4.1.6141.2.60.35.1.4.1.1.1 |
wwpLeosCfmLinkTraceMsgTargetMEPIDThis object is used to specify the target MEPID.
This object should only be set if wwpLeosCfmLinkTraceMsgTargetMacAddr is not specified else
error will be returned.rw INTEGER .1.3.6.1.4.1.6141.2.60.35.1.4.1.1.2 |
wwpLeosCfmLinkTraceMsgTargetMacAddrThis object is used to specify the target MacAddress to be used when sending link LinkMsg.
This object should only be set if wwpLeosCfmLinkTraceMsgTargetMEPID is not specified else
error will be returned.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.35.1.4.1.1.3 |
wwpLeosCfmLinkTraceMsgTTLThis object is used to specify the TTL to be used when sending link LinkTraceMsg.rw INTEGER .1.3.6.1.4.1.6141.2.60.35.1.4.1.1.4 |
wwpLeosCfmLinkTraceMsgSequenceNumberThis object is used to specify the sequence number in the linkTraceMsg.ro Integer32 .1.3.6.1.4.1.6141.2.60.35.1.4.1.1.5 |
wwpLeosCfmLinkTraceMsgRowStatusUsed to manage the creation and deletion of the
conceptual rows in this table.
To create a row in this table, a manager must
set this object to 'createAndGo'. To delete a row in this
table, set this to 'destroy'.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.35.1.4.1.1.6 |
wwpLeosCfmLinkTraceMsgPriorityThis object is used to specify the priority to be used
when sending LinkTraceMsg.rw INTEGER .1.3.6.1.4.1.6141.2.60.35.1.4.1.1.7 |
wwpLeosCfmLinkTraceMsgServiceNameThis object is used to specify the service to be used when
sending LinkTraceMsg.ro DisplayString .1.3.6.1.4.1.6141.2.60.35.1.4.1.1.50 |
wwpLeosCfmLinkTraceMsgSubPortNameThis object represents the sub-port name where the LinkTraceMsg
was sent.ro DisplayString .1.3.6.1.4.1.6141.2.60.35.1.4.1.1.52 |
wwpLeosCfmLinkTraceMsgVsIndexThis object represents the virtual switch where the LinkTraceMsg was sent.ro Unsigned32 .1.3.6.1.4.1.6141.2.60.35.1.4.1.1.53 |
wwpLeosCfmLinkTraceMsgTotalTxLtmThis object represents the total LinkTraceMsg were sent.ro Unsigned32 .1.3.6.1.4.1.6141.2.60.35.1.4.1.1.54 |
wwpLeosCfmLinkTraceMsgTotalRxLtrThis object represents the total LinkTraceMsg were received
from the LinkTraceResponse.ro Unsigned32 .1.3.6.1.4.1.6141.2.60.35.1.4.1.1.55 |
wwpLeosCfmLinkTraceMsgReplyTableThe (conceptual) table listing the display
parameters for the LinkTrace Msg Reply. SEQUENCE OF WwpLeosCfmLinkTraceMsgReplyEntry .1.3.6.1.4.1.6141.2.60.35.1.4.2 |
wwpLeosCfmLinkTraceMsgReplyEntryAn entry (conceptual row) in the wwpLeosCfmLinkTraceMsgReplyTable. WwpLeosCfmLinkTraceMsgReplyEntry .1.3.6.1.4.1.6141.2.60.35.1.4.2.1 |
wwpLeosCfmLinkTraceMsgReplyTTLThis object is used to specify the ttl of the received LinkTrace msg reply.ro Integer32 .1.3.6.1.4.1.6141.2.60.35.1.4.2.1.1 |
wwpLeosCfmLinkTraceMsgReplyTTLIndexThis object provides an additional index when multiple LinkTrace messages are received with the same TTL.ro Unsigned32 .1.3.6.1.4.1.6141.2.60.35.1.4.2.1.2 |
wwpLeosCfmLinkTraceMsgReplySequenceNumberThis object is used to specify the sequence number of the received LinkTrace msg reply.ro Integer32 .1.3.6.1.4.1.6141.2.60.35.1.4.2.1.3 |
wwpLeosCfmLinkTraceMsgReplyMPMacAddrThis object is used to specify the mac address of the MP of received LinkTrace msg reply.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.35.1.4.2.1.4 |
wwpLeosCfmLinkTraceMsgReplyMEPIDThis object is used to specify the MEP ID of the received LinkTrace msg reply.ro Integer32 .1.3.6.1.4.1.6141.2.60.35.1.4.2.1.5 |
wwpLeosCfmLinkTraceMsgReplyTargetMacAddrThis object is used to specify the Target Mac address of the received LinkTrace msg reply.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.35.1.4.2.1.6 |
wwpLeosCfmLinkTraceMsgReplyRelayActionThis object is used to specify the message reply relay action.ro Enumeration .1.3.6.1.4.1.6141.2.60.35.1.4.2.1.7 |
wwpLeosCfmLinkTraceMsgReplyIngressPortThis object is used to specify the message reply ingress port.roobsolete INTEGER .1.3.6.1.4.1.6141.2.60.35.1.4.2.1.8 |
wwpLeosCfmLinkTraceMsgReplyIngressActionThis object is used to specify the message reply ingress action.ro Enumeration .1.3.6.1.4.1.6141.2.60.35.1.4.2.1.9 |
wwpLeosCfmLinkTraceMsgReplyEgressPortThis object is used to specify the message reply egress port.roobsolete INTEGER .1.3.6.1.4.1.6141.2.60.35.1.4.2.1.10 |
wwpLeosCfmLinkTraceMsgReplyEgressActionThis object is used to specify the message reply egress action.ro Enumeration .1.3.6.1.4.1.6141.2.60.35.1.4.2.1.11 |
wwpLeosCfmLinkTraceMsgReplyIngressPortStrThis mib object is used to specify the message reply ingress port.ro DisplayString .1.3.6.1.4.1.6141.2.60.35.1.4.2.1.12 |
wwpLeosCfmLinkTraceMsgReplyEgressPortStrThis mib object is used to specify the message reply egress port.ro DisplayString .1.3.6.1.4.1.6141.2.60.35.1.4.2.1.13 |
wwpLeosCfmLinkTraceMsgReplyIngressMacAddrThis object is used to specify the message reply ingress mac address.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.35.1.4.2.1.50 |
wwpLeosCfmLinkTraceMsgReplyEgressMacAddrThis object is used to specify the message reply egress mac address.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.35.1.4.2.1.51 |
wwpLeosCfmLoopback OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.60.35.1.5 |
wwpLeosCfmLoopbackMsgTableThe (conceptual) table listing the configuration
parameters for the LoopbackMsg. SEQUENCE OF WwpLeosCfmLoopbackMsgEntry .1.3.6.1.4.1.6141.2.60.35.1.5.1 |
wwpLeosCfmLoopbackMsgEntryAn entry (conceptual row) in the wwpLeosCfmLoopbackMsgTable. WwpLeosCfmLoopbackMsgEntry .1.3.6.1.4.1.6141.2.60.35.1.5.1.1 |
wwpLeosCfmLoopbackMsgPortIdThis object is used to specify the port.ro INTEGER .1.3.6.1.4.1.6141.2.60.35.1.5.1.1.1 |
wwpLeosCfmLoopbackMsgTargetMEPIDThis object is used to specify the MEPID.
This object should only be set if wwpLeosCfmLoopbackMsgTargetMacAddr is not specified else
error will be returned.rw Unsigned32 .1.3.6.1.4.1.6141.2.60.35.1.5.1.1.2 |
wwpLeosCfmLoopbackMsgTargetMacAddrThis object is used to specify the MacAddress to be used when sending link LoopbackMsg.
This object should only be set if wwpLeosCfmLoopbackMsgTargetMEPID is not specified else
error will be returned.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.35.1.5.1.1.3 |
wwpLeosCfmLoopbackMsgCountThis object is used to specify the LoopbackMsg count to be used when sending link LoopbackMsg.rw INTEGER .1.3.6.1.4.1.6141.2.60.35.1.5.1.1.4 |
wwpLeosCfmLoopbackMsgDataThis object is used to specify the LoopbackMsg data to be used when sending link LoopbackMsg.rw DisplayString .1.3.6.1.4.1.6141.2.60.35.1.5.1.1.5 |
wwpLeosCfmLoopbackMsgPriorityThis object is used to specify the LoopbackMsg priority to be used when sending link LoopbackMsg.rw INTEGER .1.3.6.1.4.1.6141.2.60.35.1.5.1.1.6 |
wwpLeosCfmLoopbackMsgRowStatusUsed to manage the creation and deletion of the
conceptual rows in this table.
To create a row in this table, a manager must
set this object to 'createAndGo'. To delete a row in this
table, set this to 'destroy'.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.35.1.5.1.1.7 |
wwpLeosCfmLoopbackMsgDefaultIntervalThe global default LoopbackMsg interval to be used when sending link LoopbackMsgrw INTEGER .1.3.6.1.4.1.6141.2.60.35.1.5.1.1.8 |
wwpLeosCfmLoopbackMsgDefaultTimeoutThe global default LoopbackMsg timeout to be used when sending link LoopbackMsgrw INTEGER .1.3.6.1.4.1.6141.2.60.35.1.5.1.1.9 |
wwpLeosCfmMaintenance OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.60.35.1.6 |
wwpLeosCfmMaintenanceDomainTableThe (conceptual) table listing the configuration
parameters for the CFM Maintenance Domain Table. SEQUENCE OF WwpLeosCfmMaintenanceDomainEntry .1.3.6.1.4.1.6141.2.60.35.1.6.1 |
wwpLeosCfmMaintenanceDomainEntryAn entry (conceptual row) in the wwpLeosCfmMaintenanceDomainTable. WwpLeosCfmMaintenanceDomainEntry .1.3.6.1.4.1.6141.2.60.35.1.6.1.1 |
wwpLeosCfmMaintenanceDomainIndexThis object specfies the unique index in the table.ro Unsigned32 .1.3.6.1.4.1.6141.2.60.35.1.6.1.1.1 |
wwpLeosCfmMaintenanceDomainLevelThis object specfies the domain level.rw INTEGER .1.3.6.1.4.1.6141.2.60.35.1.6.1.1.2 |
wwpLeosCfmMaintenanceDomainNameThe domain name which can be modified.rw DisplayString .1.3.6.1.4.1.6141.2.60.35.1.6.1.1.3 |
wwpLeosCfmMaintenanceDomainServiceCountThis object specfies number of cfm services mapped to this domain.ro Unsigned32 .1.3.6.1.4.1.6141.2.60.35.1.6.1.1.4 |
wwpLeosCfmMaintenanceDomainMdFormatThe type (and thereby format) of the Maintenance Domain Name.rw Dot1agCfmMaintDomainNameType .1.3.6.1.4.1.6141.2.60.35.1.6.1.1.5 |
wwpLeosCfmMaintenanceDomainMdNameThe Maintenance Domain name. The type/format of this object
is determined by the value of the wwpLeosCfmMaintenanceDomainMdFormat object.rw Dot1agCfmMaintDomainName .1.3.6.1.4.1.6141.2.60.35.1.6.1.1.6 |
wwpLeosCfmMaintenanceDomainStatusUsed to manage the creation and deletion of the conceptual rows in this table.
To create a row in this table, a manager must set this object to 'createAndGo'
and specify, at a minimum, the wwpLeosCfmMaintenanceDomainLevel and
wwpLeosCfmMaintenanceDomainName objects.
During a create/set operation, if a non-default MdFormat is required, both the
wwpLeosCfmMaintenanceDomainMdFormat and wwpLeosCfmMaintenanceDomainMdName objects
must also be specified.
To delete a row in this table, set this object to 'destroy'.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.35.1.6.1.1.7 |
wwpLeosCfmMEP OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.60.35.1.7 |
wwpLeosCfmMEPTableThe (conceptual) table listing the configuration
parameters for the CFM MEP table. SEQUENCE OF WwpLeosCfmMEPEntry .1.3.6.1.4.1.6141.2.60.35.1.7.1 |
wwpLeosCfmMEPEntryAn entry (conceptual row) in the wwpLeosCfmMEPTable. WwpLeosCfmMEPEntry .1.3.6.1.4.1.6141.2.60.35.1.7.1.1 |
wwpLeosCfmMEPPortThis object is used as index in the table and is used to specify the port id.ro INTEGER .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.1 |
wwpLeosCfmMEPAdminStateThis object is used to specify the admin state of CFM MEP.rw Enumeration .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.2 |
wwpLeosCfmMEPOperStateThis object is obsolete and should not be used.roobsolete Enumeration .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.3 |
wwpLeosCfmMEPDirectionThis object is used to specify the MEP direction of the service.
This object can only be set if wwpLeosCfmServiceIndex is of type vlan.rw Enumeration .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.4 |
wwpLeosCfmMEPCCMStateThis object specifies the CCM transmission for the service specified by wwpLeosCfmServiceType.rw Enumeration .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.5 |
wwpLeosCfmMEPCCMPriorityThis object specified the priority of CCM messages transmitted.rw INTEGER .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.6 |
wwpLeosCfmMEPLTMPriorityThis object specifies the priority received on the given service and port.rwobsolete INTEGER .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.7 |
wwpLeosCfmMEPIdThis object specifies the mep id for the given service and port.rw Unsigned32 .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.8 |
wwpLeosCfmMEPMacAddrThis object specifies the mac address received on the given service and port..ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.9 |
wwpLeosCfmMEPNextLbmSeqNumberThis object specifies the next lbm sequence number received on the given service and port.ro Counter32 .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.10 |
wwpLeosCfmMEPRxValidInOrderLoopbackReplyThe total valid in order loopback replies received on the given service and port.ro Counter32 .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.11 |
wwpLeosCfmMEPRxValidOutOrderLoopbackReplyThis object specifies the total valid out of order loopback replies received on the given service and port.ro Counter32 .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.12 |
wwpLeosCfmMEPNextLTMSeqNumberThis object specifies the next LTM serquence number received on the given service and port.ro Counter32 .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.13 |
wwpLeosCfmMEPNumLoopbackRepliesTxmtThis object specifies the flags total loopback replies transmitted on the given service and port.ro Counter32 .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.14 |
wwpLeosCfmMEPNumLTMReceivedThis object specifies the total LTM messages received on the given service and port.ro Counter32 .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.15 |
wwpLeosCfmMEPNumLTMTxmtThe total LTM transmitted on the given service and port.ro Counter32 .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.16 |
wwpLeosCfmMEPNumCCMTxmtThis object specifies the total CCM messages transmitted on the given service and port.ro Counter32 .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.17 |
wwpLeosCfmMEPRowStatusUsed to manage the creation and deletion of the
conceptual rows in this table.
To create a row in this table, a manager must
set this object to 'createAndGo'. To delete a row in this
table, set this to 'destroy'.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.18 |
wwpLeosCfmMEPNumDMMSentThis object specifies the total delay measurement messages
transmitted on the given service and port.ro Counter32 .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.19 |
wwpLeosCfmMEPDMMDelayThis object specifies the average delay in microseconds
measured during the last DMM performance test on the given service and port.ro Counter32 .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.20 |
wwpLeosCfmMEPDMMJitterThis object specifies the average jitter in microseconds
measured during the last DMM performance test on the given service and port.ro Counter32 .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.21 |
wwpLeosCfmMEPNumLMMSentThe total frame loss measurement messages transmitted
during the last test performed on the given service and port.ro Counter32 .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.22 |
wwpLeosCfmMEPLMMFrameLossNearThis object specifies the number of lost frames on the near side
measured during the last LMM performance test on the given service and port.ro Counter32 .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.23 |
wwpLeosCfmMEPLMMFrameLossFarThis object specifies the number of lost frames on the far side
measured during the last LMM performance test on the given service and port.ro Counter32 .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.24 |
wwpLeosCfmMEPNumLMRReceivedThis object specifies the total number of frame loss measurement
replies received during the last test performed on the given service
and port. If this count is zero, the near and far frame loss counts
are probably invalid as connectivity to the device being tested was
not available.ro Counter32 .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.25 |
wwpLeosCfmMEPNumDMRReceivedThis object specifies the total number of delay measurement
replies received during the last test performed on the given service
and port. If this count is not equal to the number of delay
measurement frames sent, the jitter and delay are probably invalid
as connectivity to the device being tested was not stable.ro Counter32 .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.26 |
wwpLeosCfmMEPDMMMinDelayThe minimum delay in microseconds measured during
the last DMM performance test on the given service and port.ro Counter32 .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.27 |
wwpLeosCfmMEPDMMMaxDelayThe maximum delay in microseconds measured during
the last DMM performance test on the given service and port.ro Counter32 .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.28 |
wwpLeosCfmMEPDMMMinJitterThe minimum jitter in microseconds measured during
the last DMM performance test on the given service and port.ro Counter32 .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.29 |
wwpLeosCfmMEPDMMMaxJitterThe maximum jitter in microseconds measured during
the last DMM performance test on the given service and port.ro Counter32 .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.30 |
wwpLeosCfmMEPServiceNameThis object is used to specify the service name assigned to this port.ro DisplayString .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.50 |
wwpLeosCfmMEPSubPortNameThis object represents the sub-port name assigned to the given service and port.ro DisplayString .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.51 |
wwpLeosCfmMEPVsPbtNameThis object represents the virtual switch or Pbt tunnel assigned to the given service and port.ro DisplayString .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.52 |
wwpLeosCfmMEPLogicalPortNameThis object represents the logical port name assigned to the given service and port.ro DisplayString .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.53 |
wwpLeosCfmMEPSubPortIndexThis object is used to specify the CFM sub-port index.ro Unsigned32 .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.54 |
wwpLeosCfmMEPEncapsulationThis object is used to specify the encapsulation applied to the service and port.ro Enumeration .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.55 |
wwpLeosCfmMEPLeadPortBayIndexThis object is used as to specify the agent bay that MEP is in.ro Unsigned32 .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.56 |
wwpLeosCfmMEPLeadPortShelfIndexThis object is used as to specify the agent shelf that MEP is in.ro Unsigned32 .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.57 |
wwpLeosCfmMEPLeadPortModuleIndexThis object is used as to specify the agent module that MEP is in.
Index = 255 is reserved for Lag ports and this this object cannot be set to 255
in this table.ro Unsigned32 (1..7 | 255) .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.58 |
wwpLeosCfmMEPPBTBvidThis object specifies the BVID assigned to the given service and port.ro Unsigned32 .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.59 |
wwpLeosCfmMEPPBTEtypeThis object specifies the E-type assigned to the given service and port.ro Unsigned32 .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.60 |
wwpLeosCfmMEPNumLbmTxmtThis object specifies the total loopback messages transmitted on the
given service and port.ro Counter32 .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.61 |
wwpLeosCfmMEPNumLbmReceivedThis object specifies the total loopback messages received on the
given service and port.ro Counter32 .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.62 |
wwpLeosCfmMEPNumLoopbackRepliesReceivedThis object specifies the total loopback replies received on the
given service and port.ro Counter32 .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.63 |
wwpLeosCfmMEPNumLTRepliesTxmtThis object specifies the total link trace replies transmitted on the
given service and port.ro Counter32 .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.64 |
wwpLeosCfmMEPNumLTRepliesReceivedThis object specifies the total link trace replies received on the
given service and port.ro Counter32 .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.65 |
wwpLeosCfmMEPNumUnexpectedLTRepliesReceivedThis object specifies the total unexpected link trace replies received on the
given service and port.ro Counter32 .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.66 |
wwpLeosCfmMEPNumCCMReceivedThis object specifies the total CCM messages received on the given service and port.ro Counter32 .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.67 |
wwpLeosCfmRemoteMEP OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.60.35.1.8 |
wwpLeosCfmRemoteMEPTableThe (conceptual) table listing the display
parameters for the Remote MEP table. SEQUENCE OF WwpLeosCfmRemoteMEPEntry .1.3.6.1.4.1.6141.2.60.35.1.8.1 |
wwpLeosCfmRemoteMEPEntryAn entry (conceptual row) in the wwpLeosCfmRemoteMEPTable. WwpLeosCfmRemoteMEPEntry .1.3.6.1.4.1.6141.2.60.35.1.8.1.1 |
wwpLeosCfmRemoteMEPIDThis object is used as index in the table and is used to specify the MEPID.ro Unsigned32 .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.1 |
wwpLeosCfmRemoteMEPAdminStateThe administrative state of the Remote MEP State Machine.rw Enumeration .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.2 |
wwpLeosCfmRemoteMEPOperStateThe operational state of the Remote MEP State Machine.
disabled represents that remote mep is admin disabled.
enabled represents that remote mep is operationally enabled
hold represents that remote mep is admin enabled but currently in operational hold state
holdLocked represents that remote mep is locked in hold state.ro Enumeration .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.3 |
wwpLeosCfmRemoteMEPTimeThis object is used to specify the time at which the Remote MEP State Machine last
entered RMEP_FAILED or RMEP_OK states.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.4 |
wwpLeosCfmRemoteMEPMacAddrThis object is used to specify the MAC address of the remote MEP.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.5 |
wwpLeosCfmRemoteMEPKLastMacStatusThis object is used to specify the last MAC status received.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.6 |
wwpLeosCfmRemoteMEPFailureFlagThis object is used to specify the Remote MEP failure flag.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.7 |
wwpLeosCfmRemoteMEPCCMErrorFlagThis object is used to specify the MEP CCM error flag.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.8 |
wwpLeosCfmRemoteMEPRDIErrorFlagThis object is used to specify the MEP RDI error flag.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.9 |
wwpLeosCfmRemoteMEPNumCCMRxThis object is used to show the number of MEP CCM frames received.ro Counter32 .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.10 |
wwpLeosCfmRemoteMEPNumDMMSentThe number of DMM frames sent.ro Counter32 .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.11 |
wwpLeosCfmRemoteMEPDelayThis object is used to show the average Delay in microseconds
during the last Delay Measurement test.ro Counter32 .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.12 |
wwpLeosCfmRemoteMEPJitterThis object is used to show the average Jitter in microseconds
during the last Delay Measurement test.ro Counter32 .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.13 |
wwpLeosCfmRemoteMEPNumLMMSentThis object is used to show the number of LMM frames sent.ro Counter32 .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.14 |
wwpLeosCfmRemoteMEPFrameLossNearThis object is used to show the near side Frame Loss
during the last Frame Loss Measurement test.ro Counter32 .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.15 |
wwpLeosCfmRemoteMEPFrameLossFarThis object is used to show the far side Frame Loss
during the last Frame Loss Measurement test.ro Counter32 .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.16 |
wwpLeosCfmRemoteMEPNumLMRReceivedThis object is used to show the number of LMR frames received.ro Counter32 .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.17 |
wwpLeosCfmRemoteMEPNumCCMLostThis object is used to show the number of MEP CCM frames lost,
as calculated by watching for CCM sequence errors.ro Counter32 .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.18 |
wwpLeosCfmRemoteMEPNumDMRReceivedThis object is used to show the number of DMR frames received.ro Counter32 .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.19 |
wwpLeosCfmRemoteMEPHoldStateThis object is used to set the remote MEP Hold Staterwdeprecated Enumeration .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.20 |
wwpLeosCfmRemoteMEPRowStatusThis object is used to create entries in remote mep tablerw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.21 |
wwpLeosCfmRemoteMEPCCMCommentThis mib object contains the CCM Comment, if available,
that was sent by the remote Ciena device.ro DisplayString .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.22 |
wwpLeosCfmRemoteMEPBadSequenceThis mib object contains the number of LMR frames received
with bad sequence number, for a given service and remote mep.ro Counter32 .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.23 |
wwpLeosCfmRemoteMEPMinDelayThe minimum Delay in microseconds
during the last Delay Measurement test.ro Counter32 .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.24 |
wwpLeosCfmRemoteMEPMaxDelayThe maximum Delay in microseconds
during the last Delay Measurement test.ro Counter32 .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.25 |
wwpLeosCfmRemoteMEPMinJitterThe minimum jitter in microseconds
during the last Delay Measurement test.ro Counter32 .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.26 |
wwpLeosCfmRemoteMEPMaxJitterThe maximum jitter in microseconds
during the last Delay Measurement test.ro Counter32 .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.27 |
wwpLeosCfmRemoteCfmMEPHoldStateHold-state for the remote-mep entry.rw Enumeration .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.28 |
wwpLeosCfmRemoteMEPServiceClearSetting this object to true causes the remote MEP for this service
to be re-initialized .rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.29 |
wwpLeosCfmRemoteMEPServiceStatisticsClearSetting this object to true resets the statistics for the remote MEP
for this service.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.30 |
wwpLeosCfmRemoteMEPAcceleratedSpecifies if the remote-mep is monitored in the hardware.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.49 |
wwpLeosCfmRemoteMEPSubPortNameThe object indicates the unique index for the module.ro DisplayString .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.50 |
wwpLeosCfmRemoteMEPServiceNameThis object is used to specify the Service name.ro DisplayString .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.51 |
wwpLeosCfmRemoteMEPBayIndexThis object is used as to specify the agent bay that MEP is in.ro Unsigned32 .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.52 |
wwpLeosCfmRemoteMEPShelfIndexThis object is used as to specify the agent shelf that MEP is in.ro Unsigned32 .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.53 |
wwpLeosCfmRemoteMEPModuleIndexThis object is used as to specify the agent module that MEP is in.
Index = 255 is reserved for Lag ports and this this object cannot be set to 255
in this table.ro Unsigned32 (1..7 | 255) .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.54 |
wwpLeosCfmRemoteMEPPreviousBayIndexThis object is used as to specify the agent bay that MEP was previously in.ro Unsigned32 .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.55 |
wwpLeosCfmRemoteMEPPreviousShelfIndexThis object is used as to specify the agent shelf that MEP was previously in.ro Unsigned32 .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.56 |
wwpLeosCfmRemoteMEPPreviousModuleIndexThis object is used as to specify the agent module that MEP was previously in.
Index = 255 is reserved for Lag ports and this this object cannot be set to 255
in this table.ro Unsigned32 (1..7 | 255) .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.57 |
wwpLeosCfmRemoteMEPLastPortStatusThis object is used as to specify the remote MEP last port status.ro Enumeration .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.58 |
wwpLeosCfmRemoteMEPLastInterfaceStatusThis object is used as to specify the remote MEP interface status.ro Enumeration .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.59 |
wwpLeosCfmRemoteMEPLastSeqNumThis object is used to show the tbd.ro Unsigned32 .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.60 |
wwpLeosCfmRemoteMEPCCMSeqErrorsThis object is used to show the number of MEP CCM frames sequence errors.ro Unsigned32 .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.61 |
wwpLeosCfmRemoteMEPCCMLevelThis object is used as to specify the CCM level.ro INTEGER .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.62 |
wwpLeosCfmRemoteMEPDeleteAllSetting this object to true will delete all remote meps.
This object will always return false.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.35.1.8.65 |
wwpLeosCfmStack OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.60.35.1.9 |
wwpLeosCfmPortStackTableThe (conceptual) table listing the display
parameters for the CFM port stack table.deprecated SEQUENCE OF WwpLeosCfmPortStackEntry .1.3.6.1.4.1.6141.2.60.35.1.9.1 |
wwpLeosCfmPortStackEntryAn entry (conceptual row) in the wwpLeosCfmPortStackTable.deprecated WwpLeosCfmPortStackEntry .1.3.6.1.4.1.6141.2.60.35.1.9.1.1 |
wwpLeosCfmPortStackPortThis object is used as index in the table and is used to specify the port id.rodeprecated INTEGER .1.3.6.1.4.1.6141.2.60.35.1.9.1.1.1 |
wwpLeosCfmPortStackVidThis object is used as index in the table and is used to show the VLAN.rodeprecated INTEGER .1.3.6.1.4.1.6141.2.60.35.1.9.1.1.2 |
wwpLeosCfmPortStackTypeThis object is used as index in the table and is used to show the type of Maintenance Point.rodeprecated Enumeration .1.3.6.1.4.1.6141.2.60.35.1.9.1.1.3 |
wwpLeosCfmPortStackLevelThis object is used as index in the table and is used to show the level of stack.rodeprecated Unsigned32 .1.3.6.1.4.1.6141.2.60.35.1.9.1.1.4 |
wwpLeosCfmPortStackMEPIdThe MEP ID.rodeprecated INTEGER .1.3.6.1.4.1.6141.2.60.35.1.9.1.1.5 |
wwpLeosCfmMipCCMDb OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.60.35.1.10 |
wwpLeosCfmMipCCMDbTableThe (conceptual) table listing the display
parameters for the MIP CCM Db table. SEQUENCE OF WwpLeosCfmMipCCMDbEntry .1.3.6.1.4.1.6141.2.60.35.1.10.1 |
wwpLeosCfmMipCCMDbEntryAn entry (conceptual row) in the wwpLeosCfmMipCCMDbTable. WwpLeosCfmMipCCMDbEntry .1.3.6.1.4.1.6141.2.60.35.1.10.1.1 |
wwpLeosCfmMipCCMDbIndexThis object shows the CCM DB vlan.ro Unsigned32 .1.3.6.1.4.1.6141.2.60.35.1.10.1.1.1 |
wwpLeosCfmMipCCMDbVidThis object shows the CCM DB vlan.ro Unsigned32 .1.3.6.1.4.1.6141.2.60.35.1.10.1.1.2 |
wwpLeosCfmMipCCMDbMacAddrThis object shows the mac address.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.35.1.10.1.1.3 |
wwpLeosCfmMipCCMDbPortThis object shows the CCM DB port.ro INTEGER .1.3.6.1.4.1.6141.2.60.35.1.10.1.1.4 |
wwpLeosCfmMipCCMDbMEPIDThis object shows the CCM DB MEP ID.ro INTEGER .1.3.6.1.4.1.6141.2.60.35.1.10.1.1.5 |
wwpLeosCfmMipCCMdbNumCCMRxThis object shows the number of CCM DB packets received.ro Counter32 .1.3.6.1.4.1.6141.2.60.35.1.10.1.1.6 |
wwpLeosCfmMipCCMDbTimeThis object shows the CCM DB time.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.6141.2.60.35.1.10.1.1.7 |
wwpLeosCfmMipCCMDbLastMacStatusThis object shows the CCM DB last mac status.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.35.1.10.1.1.8 |
wwpLeosCfmMipCCMDbRDIErrorFlagThis object shows the CCM DB RDI error flag status.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.35.1.10.1.1.9 |
wwpLeosCfmFaultNotif OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.60.35.1.11 |
wwpLeosCfmDelay OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.60.35.1.12 |
wwpLeosCfmDelayMsgTableThe (conceptual) table listing the configuration
parameters for the DelayMeasurementMsg. SEQUENCE OF WwpLeosCfmDelayMsgEntry .1.3.6.1.4.1.6141.2.60.35.1.12.1 |
wwpLeosCfmDelayMsgEntryAn entry (conceptual row) in the wwpLeosCfmDelayMsgTable. WwpLeosCfmDelayMsgEntry .1.3.6.1.4.1.6141.2.60.35.1.12.1.1 |
wwpLeosCfmDelayMsgPortIdThis object is used to specify the port.ro INTEGER .1.3.6.1.4.1.6141.2.60.35.1.12.1.1.1 |
wwpLeosCfmDelayMsgTargetMEPIDThis object is used to specify the MEPID.
This object should only be set if wwpLeosCfmDelayMsgTargetMacAddr is not specified else
error will be returned.rw Unsigned32 .1.3.6.1.4.1.6141.2.60.35.1.12.1.1.2 |
wwpLeosCfmDelayMsgTargetMacAddrThis object is used to specify the MacAddress to be used when sending link LoopbackMsg.
This object should only be set if wwpLeosCfmDelayMsgTargetMEPID is not specified else
error will be returned.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.35.1.12.1.1.3 |
wwpLeosCfmDelayMsgCountThis object is used to specify the DelayMeasurementMsg count to be used
when sending link DelayMeasurementMsg.rw INTEGER .1.3.6.1.4.1.6141.2.60.35.1.12.1.1.4 |
wwpLeosCfmDelayMsgPriorityThis object is used to specify the DelayMeasurementMsg priority to be
used when sending link DelayMeasurementMsg.rw INTEGER .1.3.6.1.4.1.6141.2.60.35.1.12.1.1.5 |
wwpLeosCfmDelayMsgRowStatusUsed to manage the creation and deletion of the
conceptual rows in this table.
To create a row in this table, a manager must set this object to
'createAndGo'. To delete a row in this table, set this to 'destroy'.
If 'destroy' is used and either TargetMacAddr or TargetMEPID is
specified, a cancel will be done for any repeating test on those items.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.35.1.12.1.1.6 |
wwpLeosCfmDelayMsgRepeatUsed to make the Delay Measurement test a repeating test.rw Enumeration .1.3.6.1.4.1.6141.2.60.35.1.12.1.1.7 |
wwpLeosCfmDelayMsgRepeatCountThe repeat time in minutes for the Delay Measurement test.
If zero is specified, the test runs continuously.rw INTEGER .1.3.6.1.4.1.6141.2.60.35.1.12.1.1.8 |
wwpLeosCfmDelayMsgDelayThresholdThe fault threshold for the Delay Measurement test, specified
in microseconds. A value of -1 disables the generate of faults,
0 or greater will be compared to the average delay result of the
test and a fault will be generated if the threshold is exceeded.rw INTEGER (-1..2147483647) .1.3.6.1.4.1.6141.2.60.35.1.12.1.1.9 |
wwpLeosCfmDelayMsgJitterThresholdThe fault threshold for the Jitter Measurement test, specified
in microseconds. A value of -1 disables the generate of faults,
0 or greater will be compared to the average jitter result of the
test and a fault will be generated if the threshold is exceeded.rw INTEGER (-1..2147483647) .1.3.6.1.4.1.6141.2.60.35.1.12.1.1.10 |
wwpLeosCfmDelayMsgMaxDelayThresholdThe fault threshold for the Delay Measurement test, specified
in microseconds. A value of -1 disables the generate of faults,
0 or greater will be compared to the maximum delay result of the
test and a fault will be generated if the threshold is exceeded.rw INTEGER (-1..2147483647) .1.3.6.1.4.1.6141.2.60.35.1.12.1.1.11 |
wwpLeosCfmDelayMsgMaxJitterThresholdThe fault threshold for the Jitter Measurement test, specified
in microseconds. A value of -1 disables the generate of faults,
0 or greater will be compared to the maximum jitter result of the
test and a fault will be generated if the threshold is exceeded.rw INTEGER (-1..2147483647) .1.3.6.1.4.1.6141.2.60.35.1.12.1.1.12 |
wwpLeosCfmFrameLoss OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.60.35.1.13 |
wwpLeosCfmFrameLossMsgTableThe (conceptual) table listing the configuration
parameters for the FrameLossMeasurementMsg. SEQUENCE OF WwpLeosCfmFrameLossMsgEntry .1.3.6.1.4.1.6141.2.60.35.1.13.1 |
wwpLeosCfmFrameLossMsgEntryAn entry (conceptual row) in the wwpLeosCfmFrameLossMsgTable. WwpLeosCfmFrameLossMsgEntry .1.3.6.1.4.1.6141.2.60.35.1.13.1.1 |
wwpLeosCfmFrameLossMsgPortIdThis object is used to specify the port.ro INTEGER .1.3.6.1.4.1.6141.2.60.35.1.13.1.1.1 |
wwpLeosCfmFrameLossMsgTargetMEPIDThis object is used to specify the MEPID.
This object should only be set if wwpLeosCfmFrameLossMsgTargetMacAddr is not specified else
error will be returned.rw Unsigned32 .1.3.6.1.4.1.6141.2.60.35.1.13.1.1.2 |
wwpLeosCfmFrameLossMsgTargetMacAddrThis object is used to specify the MacAddress to be used when sending link LoopbackMsg.
This object should only be set if wwpLeosCfmFrameLossMsgTargetMEPID is not specified else
error will be returned.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.35.1.13.1.1.3 |
wwpLeosCfmFrameLossMsgCountThis object is used to specify the FrameLossMeasurementMsg count to be used
when sending link FrameLossMeasurementMsg.rw INTEGER .1.3.6.1.4.1.6141.2.60.35.1.13.1.1.4 |
wwpLeosCfmFrameLossMsgPriorityThis object is used to specify the FrameLossMeasurementMsg priority to be
used when sending link FrameLossMeasurementMsg.rw INTEGER .1.3.6.1.4.1.6141.2.60.35.1.13.1.1.5 |
wwpLeosCfmFrameLossMsgRowStatusUsed to manage the creation and deletion of the
conceptual rows in this table.
To create a row in this table, a manager must set this object to
'createAndGo'. To delete a row in this table, set this to 'destroy'.
If 'destroy' is used and either TargetMacAddr or TargetMEPID is
specified, a cancel will be done for any repeating test on those items.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.35.1.13.1.1.6 |
wwpLeosCfmFrameLossMsgRepeatUsed to make the Frame Loss Measurement test a repeating test.rw Enumeration .1.3.6.1.4.1.6141.2.60.35.1.13.1.1.7 |
wwpLeosCfmFrameLossMsgRepeatCountThe repeat time in minutes for the Frame Loss Measurement test.
If zero is specified, the test runs continuously.rw INTEGER .1.3.6.1.4.1.6141.2.60.35.1.13.1.1.8 |
wwpLeosCfmFrameLossMsgFlnThresholdThe fault threshold for the Frame Loss Measurement test.
A value of -1 disables the generate of faults, 0 or greater
will be compared to the frame loss near result of the
test and a fault will be generated if the threshold is exceeded.rw INTEGER (-1..600) .1.3.6.1.4.1.6141.2.60.35.1.13.1.1.9 |
wwpLeosCfmFrameLossMsgFlfThresholdThe fault threshold for the Frame Loss Measurement test.
A value of -1 disables the generate of faults, 0 or greater
will be compared to the frame loss far result of the
test and a fault will be generated if the threshold is exceeded.rw INTEGER (-1..600) .1.3.6.1.4.1.6141.2.60.35.1.13.1.1.10 |
wwpLeosCfmRemoteMEPCCMLoss OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.60.35.1.14 |
wwpLeosCfmRemoteMEPCCMLossTableThe (conceptual) table listing the display
parameters for the Remote MEP CCM Loss table. SEQUENCE OF WwpLeosCfmRemoteMEPCCMLossEntry .1.3.6.1.4.1.6141.2.60.35.1.14.1 |
wwpLeosCfmRemoteMEPCCMLossEntryAn entry (conceptual row) in the wwpLeosCfmRemoteMEPCCMLossTable. WwpLeosCfmRemoteMEPCCMLossEntry .1.3.6.1.4.1.6141.2.60.35.1.14.1.1 |
wwpLeosCfmRemoteMEPCCMLossNumThis object is used as an index into the table and is used to specify
the CCM Loss bucket to be returned. Unsigned32 .1.3.6.1.4.1.6141.2.60.35.1.14.1.1.1 |
wwpLeosCfmRemoteMEPCCMLossCountCount of the number of CCM's lost during the
wwpLeosCfmServiceCCMLossBucketInterval sample period.ro Gauge32 .1.3.6.1.4.1.6141.2.60.35.1.14.1.1.2 |
wwpLeosCfmExtStack OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.60.35.1.15 |
wwpLeosCfmExtPortStackTableThe (conceptual) table listing the display
parameters for the CFM port stack table. SEQUENCE OF WwpLeosCfmExtPortStackEntry .1.3.6.1.4.1.6141.2.60.35.1.15.1 |
wwpLeosCfmExtPortStackEntryAn entry (conceptual row) in the wwpLeosCfmPortStackTable. WwpLeosCfmExtPortStackEntry .1.3.6.1.4.1.6141.2.60.35.1.15.1.1 |
wwpLeosCfmExtPortStackVidThis object is used as index in the table and is used to show the VLAN.ro INTEGER .1.3.6.1.4.1.6141.2.60.35.1.15.1.1.1 |
wwpLeosCfmExtPortStackPortThis object is used as index in the table and is used to specify the port id.ro INTEGER .1.3.6.1.4.1.6141.2.60.35.1.15.1.1.2 |
wwpLeosCfmExtPortStackTypeThis object is used as index in the table and is used to show the type of Maintenance Point.ro Enumeration .1.3.6.1.4.1.6141.2.60.35.1.15.1.1.3 |
wwpLeosCfmExtPortStackLevelThis object is used as index in the table and is used to show the level of stack.ro Unsigned32 .1.3.6.1.4.1.6141.2.60.35.1.15.1.1.4 |
wwpLeosCfmExtPortStackMEPIdThe MEP ID.ro INTEGER .1.3.6.1.4.1.6141.2.60.35.1.15.1.1.5 |
wwpLeosCfmServiceFrameBudget OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.60.35.1.16 |
wwpLeosCfmServiceFrameBudgetTableThe (conceptual) table listing the config
parameters for the CFM service frame budget table. SEQUENCE OF WwpLeosCfmServiceFrameBudgetEntry .1.3.6.1.4.1.6141.2.60.35.1.16.1 |
wwpLeosCfmServiceFrameBudgetEntryAn entry (conceptual row) in the wwpLeosCfmServiceFrameBudgetTable. WwpLeosCfmServiceFrameBudgetEntry .1.3.6.1.4.1.6141.2.60.35.1.16.1.1 |
wwpLeosCfmSlotIndexThis object identifies the slot number. INTEGER .1.3.6.1.4.1.6141.2.60.35.1.16.1.1.1 |
wwpLeosCfmServiceFrameBudgetSlotThis object specifies the CFM frame budget for the slot for the given service.ro Counter32 UNITS "frames/sec" .1.3.6.1.4.1.6141.2.60.35.1.16.1.1.2 |
wwpLeosCfmExtMIBObj OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.60.35.1.21 |
wwpLeosCfmExtLoopback OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.60.35.1.21.3 |
wwpLeosCfmExtMEP OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.60.35.1.21.7 |
wwpLeosCfmExtLinkTrace OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.60.35.1.21.8 |
wwpLeosCfmExtDelay OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.60.35.1.21.12 |
wwpLeosCfmExtFrameLoss OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.60.35.1.21.13 |
wwpLeosCfmExtInterfaceStack OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.60.35.1.21.14 |
wwpLeosCfmExtMIP OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.60.35.1.21.15 |
wwpLeosCfmExtInterfaceMIP OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.60.35.1.21.16 |
wwpLeosCfmExtOamPort OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.60.35.1.21.17 |
wwpLeosCfmNotifMIBNotificationPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.60.35.2 |
wwpLeosCfmNotifMIBNotification OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.60.35.2.0 |
wwpLeosCfmExtLoopbackMsgTableThe (conceptual) table listing the configuration parameters for the LoopbackMsg.
The following attributes are required to create a LoopbackMsg:
::= { wwpLeosCfmExtLoopback 1 }
wwpLeosCfmExtLoopbackMsgEntry OBJECT-TYPE
SYNTAX WwpLeosCfmExtLoopbackMsgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION SEQUENCE OF WwpLeosCfmExtLoopbackMsgEntry .1.3.6.1.4.1.6141.2.60.35.2.0.13 |
wwpLeosCfmMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.60.35.3 |
wwpLeosCfmMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.60.35.3.1 |
wwpLeosCfmMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.60.35.3.2 |