TN-ETHSOAM-PM-MIB
AI MIB Summary
The TN-ETHSOAM-PM-MIB module enables SNMP-based performance monitoring of Ethernet Services OAM metrics, specifically tracking packet loss, delay, and jitter counters for TN platform network devices. It facilitates the collection of critical service-level agreement (SLA) data required for diagnosing Ethernet service degradation and validating transport network health.
This MIB module contains the Performance Monitoring objects for the management of Ethernet Services Operations, Administration and Maintenance in TN platform products.
Main OID:
tnEthSoamPmMIB.1.3.6.1.4.1.7483.6.143
98
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
98 total| Object Name |
|---|
tnEthSoamPmMIBThis MIB module contains the Performance Monitoring objects for
the management of Ethernet Services Operations, Administration
and Maintenance in TN platform products. MODULE-IDENTITY .1.3.6.1.4.1.7483.6.143 |
tnEthSoamPmNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.7483.6.143.0 |
tnEthSoamPmCfgMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.7483.6.143.1 |
tnEthSoamPmSessionCfgObjects OBJECT IDENTIFIER .1.3.6.1.4.1.7483.6.143.1.1 |
tnEthSoamPmSessionCfgTableThis table configure the Performance monitor session and storage settings. SEQUENCE OF TnEthSoamPmSessionCfgEntry .1.3.6.1.4.1.7483.6.143.1.1.1 |
tnEthSoamPmSessionCfgEntryEntries in this table configure the Performance monitor session and storage settings. TnEthSoamPmSessionCfgEntry .1.3.6.1.4.1.7483.6.143.1.1.1.1 |
tnEthSoamPmSessionCfgIdAn index to the Performce Monitor Configuration table which indicates
the specific session to be configured. Integer32 .1.3.6.1.4.1.7483.6.143.1.1.1.1.1 |
tnEthSoamPmSessionCfgTypeThe Perfmonce Monitor session type:
- lossMeasurement SOAM PM loss measurement collect and storage.
- delayMeasurement SOAM PM delay measurement collect and storage.
- evc EVC Port based counters collect and storage.
- ece ECE Port based counters collect and storage.
- port Port based counters collect and storage.ro Enumeration .1.3.6.1.4.1.7483.6.143.1.1.1.1.2 |
tnEthSoamPmSessionCfgSessionModeEnable or disable this performance monitor session.rw Enumeration .1.3.6.1.4.1.7483.6.143.1.1.1.1.3 |
tnEthSoamPmSessionCfgStorageModeEnable or disable the performance monitor local storage.rw Enumeration .1.3.6.1.4.1.7483.6.143.1.1.1.1.4 |
tnEthSoamPmSessionCfgIntervalThe measurement interval for the performance monitor.
The interval unit is minute, the valid range is system defined.
A typical range would be 1 - 60(mins)rw Unsigned32 .1.3.6.1.4.1.7483.6.143.1.1.1.1.5 |
tnEthSoamPmTransferCfgObjects OBJECT IDENTIFIER .1.3.6.1.4.1.7483.6.143.1.2 |
tnEthSoamPmTransferCfgTableThis table configure the Performance Monitor data transfer related settings. SEQUENCE OF TnEthSoamPmTransferCfgEntry .1.3.6.1.4.1.7483.6.143.1.2.1 |
tnEthSoamPmTransferCfgEntryEntry in this table configure the Performance Monitor data transfer related settings. TnEthSoamPmTransferCfgEntry .1.3.6.1.4.1.7483.6.143.1.2.1.1 |
tnEthSoamPmTransferCfgIdIndicate the performance monitor data transfer table index. Integer32 .1.3.6.1.4.1.7483.6.143.1.2.1.1.1 |
tnEthSoamPmTransferCfgModeConfigure the performance monitor transfer mode per system. Possible modes are:
- Enabled: Transfer data is enabled.
- Disabled: Transfer data is disabled.rw Enumeration .1.3.6.1.4.1.7483.6.143.1.2.1.1.2 |
tnEthSoamPmTransferCfgSchedHrsIt must be possible to select one or more of the 24 hours in a day, when PM data transfer will happen.
00:00
01:00
02:00
03:00
04:00
05:00
06:00
07:00
08:00
09:00
10:00
11:00
12:00
13:00
14:00
15:00
16:00
17:00
18:00
19:00
20:00
21:00
22:00
23:00
Default is none selected.rw Bits .1.3.6.1.4.1.7483.6.143.1.2.1.1.3 |
tnEthSoamPmTransferCfgSchedMinsIt must be possible to select one or more of the four 15 min. in an hour, when PM data transfer will happen.
00:00
00:15
00:30
00:45
Default is none selected.rw Bits .1.3.6.1.4.1.7483.6.143.1.2.1.1.4 |
tnEthSoamPmTransferCfgSchedOffsetIt must be possible to configure a fixed offset that is added to the scheduled transfer time.
The rage is 0-15 minutes. Default is 0 min.
The sum of Scheduled Fixed Offset and Scheduled Random Offset must not exceed 15 min.rw Integer32 .1.3.6.1.4.1.7483.6.143.1.2.1.1.5 |
tnEthSoamPmTransferCfgRandomOffsetIt must be possible to configure a random offset that is added to the scheduled transfer time.
The offset added to the scheduled transfer time must be a random value in the range 0-Scheduled Offset.
The range is 0-900 seconds. Default is 0 sec.
The sum of Scheduled Offset and Random Offset must not exceed 15 min.rw Integer32 .1.3.6.1.4.1.7483.6.143.1.2.1.1.6 |
tnEthSoamPmTransferCfgServerAddrIt must be possible to configure the full URL of the server and the
corresponding directory (if any) for uploading.
The supported protocols are HTTP and TFTP.
To enable HTTP by entering http:// followed by the domain name or IP address.
To enable TFTP by entering tftp:// followed by the domain name or IP address.
The format is:
protocol://host_address:port_num/folder_name
while port_num and folder_name are optional.
For example, 'tftp://192.251.1.1:55/' will upload the counter files to
the tftp root directory in 192.251.1.1 at port 55 via tftp.rw OCTET STRING .1.3.6.1.4.1.7483.6.143.1.2.1.1.7 |
tnEthSoamPmTransferCfgIntervalModeThere are three supported interval modes.
All available intervals: To enable transfer of all completed Measurement Intervals.
New intervals since last transfer: To enable transfer of only completed Measurement Intervals since last transfer.
Fixed number of intervals: To enable transfer of all completed Measurement Intervals up to the configured number.rw Enumeration .1.3.6.1.4.1.7483.6.143.1.2.1.1.8 |
tnEthSoamPmTransferCfgIntervalNumWhen Fixed number of interval selected, this value is used to determine the number of intervals to send.
The range is 1 to 96 Intervals.rw Integer32 .1.3.6.1.4.1.7483.6.143.1.2.1.1.9 |
tnEthSoamPmTransferCfgIncludeIncompleteWhen this option is checked, PM data transfer will include the suspended (incomplete) transmission.
- Enabled: PM data transfer will include the suspended (incomplete) transmission.
- Disabled: PM data transfer will not include the suspended (incomplete) transmission.rw Enumeration .1.3.6.1.4.1.7483.6.143.1.2.1.1.10 |
tnEthSoamPmStatsMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.7483.6.143.2 |
tnEthSoamPmLmStatsObjects OBJECT IDENTIFIER .1.3.6.1.4.1.7483.6.143.2.1 |
tnEthSoamPmLmHistoryStatsTableThis table contains the results for availability history Measurement
Intervals in a SOAM Loss Measurement session.
Rows of this table object are created automatically
by the SNMP Agent when the Loss Measurement session is running and a
Measurement Interval is completed.
Each row in the table represents the history statistics for a Loss
Measurement session availability Measurement Interval for the defined
MEP.
32 completed Measurement Intervals are to be supported. If
there are at least 32 rows in the table and a new Measurement Interval
completes and a new row is to be added to the table, the oldest completed
Measurement Interval is deleted (row deletion).
The rows and objects in this table are to be persistent upon reboot
or restart of a device if tnEthSoamPmSessionCfgStorageMode is enabled
for tnEthSoamPmSessionCfgType of 'lossMeasurement'. SEQUENCE OF TnEthSoamPmLmHistoryStatsEntry .1.3.6.1.4.1.7483.6.143.2.1.1 |
tnEthSoamPmLmHistoryStatsEntryThe conceptual row of tnEthSoamPmLmHistoryStatsTable TnEthSoamPmLmHistoryStatsEntry .1.3.6.1.4.1.7483.6.143.2.1.1.1 |
tnEthSoamPmLmHistoryStatsIndexThe index for the Measurement Interval within this PM session.
Measurement Interval indexes are assigned sequentially by
the device. The first Measurement Interval that occurs after
the session is started is assigned index 1.
Referential integrity is necessary, i.e., the index needs to be
persistent upon a reboot or restart of a device. The index
is never reused while this session is active until it wraps to zero.
The index value keeps increasing up to that time. Unsigned32 .1.3.6.1.4.1.7483.6.143.2.1.1.1.1 |
tnEthSoamPmLmHistoryStatsEndTimeThe time that this Measurement Interval ended.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.7483.6.143.2.1.1.1.2 |
tnEthSoamPmLmHistoryStatsElapsedTimeThe time that this Measurement Interval has been running, in 0.01
seconds.ro TimeInterval (SNMPv2-TC) .1.3.6.1.4.1.7483.6.143.2.1.1.1.3 |
tnEthSoamPmLmHistoryStatsTxCountThis object contains the number of outbound frames
in this MEP for this Measurement Interval.ro Counter64 .1.3.6.1.4.1.7483.6.143.2.1.1.1.4 |
tnEthSoamPmLmHistoryStatsRxCountThis object contains the number of inbound frames
in this MEP for this Measurement Interval.ro Counter64 .1.3.6.1.4.1.7483.6.143.2.1.1.1.5 |
tnEthSoamPmLmHistoryStatsNELossCountThis object contains the number of frames lossed in the
near end of this MEP for this Measurement Interval.ro Counter64 .1.3.6.1.4.1.7483.6.143.2.1.1.1.6 |
tnEthSoamPmLmHistoryStatsFELossCountThis object contains the number of frames lossed in the
far end of this MEP for this Measurement Interval.ro Counter64 .1.3.6.1.4.1.7483.6.143.2.1.1.1.7 |
tnEthSoamPmLmHistoryStatsNEAvgFlrThis object contains the average frame loss ratio in the
near end of this MEP calculated for this Measurement Interval.
The value is a ratio that is expressed as a
percent with a value of 0 (ratio 0.00) through 100000 (ratio 1.00).
Units are in milli-percent, where 1 indicates 0.001 percent.ro Unsigned32 .1.3.6.1.4.1.7483.6.143.2.1.1.1.8 |
tnEthSoamPmLmHistoryStatsFEAvgFlrThis object contains the average frame loss ratio in the
far end of this MEP calculated for this Measurement Interval.
The value is a ratio that is expressed as a
percent with a value of 0 (ratio 0.00) through 100000 (ratio 1.00).
Units are in milli-percent, where 1 indicates 0.001 percent.ro Unsigned32 .1.3.6.1.4.1.7483.6.143.2.1.1.1.9 |
tnEthSoamPmDmStatsObjects OBJECT IDENTIFIER .1.3.6.1.4.1.7483.6.143.2.2 |
tnEthSoamPmDmHistoryStatsTableThis table contains the results for history Measurement
Intervals in a SOAM Delay Measurement session.
Rows of this table are created automatically
by the SNMP Agent when the Delay Measurement session is running and a
Measurement Interval is completed.
Each row in the table represents the Measurement Interval history
statistics for a Delay Measurement session for the defined MEP.
Each row in the table represents the history statistics for a delay
Measurement session availability Measurement Interval for the defined
MEP.
32 completed Measurement Intervals are to be supported. If
there are at least 32 rows in the table and a new Measurement Interval
completes and a new row is to be added to the table, the oldest completed
Measurement Interval is deleted (row deletion).
The rows and objects in this table are to be persistent upon reboot
or restart of a device if tnEthSoamPmSessionCfgStorageMode is enabled
for tnEthSoamPmSessionCfgType of 'delayMeasurement'. SEQUENCE OF TnEthSoamPmDmHistoryStatsEntry .1.3.6.1.4.1.7483.6.143.2.2.1 |
tnEthSoamPmDmHistoryStatsEntryThe conceptual row of tnEthSoamPmDmHistoryStatsTable TnEthSoamPmDmHistoryStatsEntry .1.3.6.1.4.1.7483.6.143.2.2.1.1 |
tnEthSoamPmDmHistoryStatsIndexThe index for the Measurement Interval within this PM session.
Measurement Interval indexes are assigned sequentially by
the device. The first Measurement Interval that occurs after
the session is started is assigned index 1.
Referential integrity is necessary, i.e., the index needs to be
persistent upon a reboot or restart of a device. The index
is never reused while this session is active until it wraps to zero.
The index value keeps increasing up to that time. Unsigned32 .1.3.6.1.4.1.7483.6.143.2.2.1.1.1 |
tnEthSoamPmDmHistoryStatsEndTimeThe time that this Measurement Interval ended.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.7483.6.143.2.2.1.1.2 |
tnEthSoamPmDmHistoryStatsElapsedTimeThe time that this Measurement Interval has been running, in 0.01
seconds.ro TimeInterval (SNMPv2-TC) .1.3.6.1.4.1.7483.6.143.2.2.1.1.3 |
tnEthSoamPmDmHistoryStatsTxCountThis object contains the number of frames transmitted
in this MEP for this Measurement Interval.ro Counter64 .1.3.6.1.4.1.7483.6.143.2.2.1.1.4 |
tnEthSoamPmDmHistoryStatsRxCountThis object contains the number of frames received
in this MEP for this Measurement Interval.ro Counter64 .1.3.6.1.4.1.7483.6.143.2.2.1.1.5 |
tnEthSoamPmDmHistoryStatsFNAvgFrameDelayThis object contains the average one-way frame delay
in the far end to near end direction calculated by this MEP
for this Measurement Interval.ro Unsigned32 .1.3.6.1.4.1.7483.6.143.2.2.1.1.6 |
tnEthSoamPmDmHistoryStatsFNAvgFrameDVThis object contains the average one-way inter-frame delay
interval in the far end to near end direction calculated by
this MEP for this Measurement Interval.ro Unsigned32 .1.3.6.1.4.1.7483.6.143.2.2.1.1.7 |
tnEthSoamPmDmHistoryStatsFNMinFrameDelayThis object contains the minimum one-way inter-frame delay
interval in the far end to near end direction calculated by
this MEP for this Measurement Interval.ro Unsigned32 .1.3.6.1.4.1.7483.6.143.2.2.1.1.8 |
tnEthSoamPmDmHistoryStatsFNMaxFrameDelayThis object contains the maximum one-way inter-frame delay
interval in the far end to near end direction calculated by
this MEP for this Measurement Interval.ro Unsigned32 .1.3.6.1.4.1.7483.6.143.2.2.1.1.9 |
tnEthSoamPmDmHistoryStatsNFAvgFrameDelayThis object contains the average one-way frame delay
in the near end to far end direction calculated by this MEP
for this Measurement Interval.ro Unsigned32 .1.3.6.1.4.1.7483.6.143.2.2.1.1.10 |
tnEthSoamPmDmHistoryStatsNFAvgFrameDVThis object contains the average one-way inter-frame delay
interval in the near end to far end direction calculated by
this MEP for this Measurement Interval.ro Unsigned32 .1.3.6.1.4.1.7483.6.143.2.2.1.1.11 |
tnEthSoamPmDmHistoryStatsNFMinFrameDelayThis object contains the minimum one-way inter-frame delay
interval in the near end to far end direction calculated by
this MEP for this Measurement Interval.ro Unsigned32 .1.3.6.1.4.1.7483.6.143.2.2.1.1.12 |
tnEthSoamPmDmHistoryStatsNFMaxFrameDelayThis object contains the maximum one-way inter-frame delay
interval in the near end to far end direction calculated by
this MEP for this Measurement Interval.ro Unsigned32 .1.3.6.1.4.1.7483.6.143.2.2.1.1.13 |
tnEthSoamPmDmHistoryStatsTwoWayAvgFrameDelayThis object contains the average two-way inter-frame delay
interval direction calculated by this MEP for this
Measurement Interval.ro Unsigned32 .1.3.6.1.4.1.7483.6.143.2.2.1.1.14 |
tnEthSoamPmDmHistoryStatsTwoWayAvgFrameDVThis object contains the average two-way inter-frame delay
interval calculated by this MEP for this Measurement Interval.ro Unsigned32 .1.3.6.1.4.1.7483.6.143.2.2.1.1.15 |
tnEthSoamPmDmHistoryStatsTwoWayMinFrameDelayThis object contains the minimum two-way inter-frame delay
interval calculated by this MEP for this Measurement Interval.ro Unsigned32 .1.3.6.1.4.1.7483.6.143.2.2.1.1.16 |
tnEthSoamPmDmHistoryStatsTwoWayMaxFrameDelayThis object contains the maximum two-way inter-frame delay
interval calculated by this MEP for this Measurement Interval.ro Unsigned32 .1.3.6.1.4.1.7483.6.143.2.2.1.1.17 |
tnEthSoamPmEvcStatsObjects OBJECT IDENTIFIER .1.3.6.1.4.1.7483.6.143.2.3 |
tnEthSoamPmEvcHistoryStatsTableThis table contains the results for history Measurement
Intervals in a SOAM EVC Measurement session.
Rows of this table object are created automatically
by the SNMP Agent when the EVC Measurement session is running and a
Measurement Interval is completed.
Each row in the table represents the history statistics for a EVC
Measurement session availability Measurement Interval for the defined
EVC.
32 completed Measurement Intervals are to be supported. If
there are at least 32 rows in the table and a new Measurement Interval
completes and a new row is to be added to the table, the oldest completed
Measurement Interval is deleted (row deletion).
The rows and objects in this table are to be persistent upon reboot
or restart of a device if tnEthSoamPmSessionCfgStorageMode is enabled
for tnEthSoamPmSessionCfgType of 'evc'. SEQUENCE OF TnEthSoamPmEvcHistoryStatsEntry .1.3.6.1.4.1.7483.6.143.2.3.1 |
tnEthSoamPmEvcHistoryStatsEntryThe conceptual row of tnEthSoamPmEvcHistoryStatsTable TnEthSoamPmEvcHistoryStatsEntry .1.3.6.1.4.1.7483.6.143.2.3.1.1 |
tnEthSoamPmEvcHistoryStatsIndexThe index for the Measurement Interval within this PM session.
Measurement Interval indexes are assigned sequentially by
the device. The first Measurement Interval that occurs after
the session is started is assigned index 1.
Referential integrity is necessary, i.e., the index needs to be
persistent upon a reboot or restart of a device. The index
is never reused while this session is active until it wraps to zero.
The index value keeps increasing up to that time. Unsigned32 .1.3.6.1.4.1.7483.6.143.2.3.1.1.1 |
tnEthSoamPmEvcHistoryStatsEndTimeThe time that this Measurement Interval ended.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.7483.6.143.2.3.1.1.2 |
tnEthSoamPmEvcHistoryStatsElapsedTimeThe time that this Measurement Interval has been running, in 0.01
seconds.ro TimeInterval (SNMPv2-TC) .1.3.6.1.4.1.7483.6.143.2.3.1.1.3 |
tnEthSoamPmEvcHistoryStatsGreenFramesTxThis object contains the number of outbound frames within
the CIR / CBS compliance level in this EVC for this
Measurement Interval.ro Counter64 .1.3.6.1.4.1.7483.6.143.2.3.1.1.4 |
tnEthSoamPmEvcHistoryStatsGreenFramesRxThis object contains the number of inbound frames within
the CIR / CBS compliance level in this EVC for this
Measurement Interval.ro Counter64 .1.3.6.1.4.1.7483.6.143.2.3.1.1.5 |
tnEthSoamPmEvcHistoryStatsGreenBytesTxThis object contains the number of outbound bytes, where
frames are within the CIR / CBS compliance level in this
EVC for this Measurement Interval.ro Counter64 .1.3.6.1.4.1.7483.6.143.2.3.1.1.6 |
tnEthSoamPmEvcHistoryStatsGreenBytesRxThis object contains the number of inbound bytes, where
frames are within the CIR / CBS compliance level in this
EVC for this Measurement Interval.ro Counter64 .1.3.6.1.4.1.7483.6.143.2.3.1.1.7 |
tnEthSoamPmEvcHistoryStatsYellowFramesTxThis object contains the number of outbound frames exceeding
the CIR/CBS but within the EIR/EBS in this EVC for this
Measurement Interval.ro Counter64 .1.3.6.1.4.1.7483.6.143.2.3.1.1.8 |
tnEthSoamPmEvcHistoryStatsYellowFramesRxThis object contains the number of inbound frames exceeding
the CIR/CBS but within the EIR/EBS in this EVC for this
Measurement Interval.ro Counter64 .1.3.6.1.4.1.7483.6.143.2.3.1.1.9 |
tnEthSoamPmEvcHistoryStatsYellowBytesTxThis object contains the number of outbound bytes, where
frames exceed the CIR/CBS but are within the EIR/EBS
in this EVC for this Measurement Interval.ro Counter64 .1.3.6.1.4.1.7483.6.143.2.3.1.1.10 |
tnEthSoamPmEvcHistoryStatsYellowBytesRxThis object contains the number of inbound bytes, where
frames exceed the CIR/CBS but are within the EIR/EBS
in this EVC for this Measurement Interval.ro Counter64 .1.3.6.1.4.1.7483.6.143.2.3.1.1.11 |
tnEthSoamPmEvcHistoryStatsRedFramesRxThis object contains the number of inbound frames
not conforming to either the CIR/CBS or the EIR/EBS
in this EVC for this Measurement Interval.ro Counter64 .1.3.6.1.4.1.7483.6.143.2.3.1.1.12 |
tnEthSoamPmEvcHistoryStatsRedBytesRxThis object contains the number of inbound bytes, where
frames do not conform to either the CIR/CBS or the EIR/EBS
in this EVC for this Measurement Interval.ro Counter64 .1.3.6.1.4.1.7483.6.143.2.3.1.1.13 |
tnEthSoamPmEvcHistoryStatsDiscardFramesTxThis object contains the number of outbound frames which
were chosen to be discarded in this EVC for this
Measurement Interval.ro Counter64 .1.3.6.1.4.1.7483.6.143.2.3.1.1.14 |
tnEthSoamPmEvcHistoryStatsDiscardFramesRxThis object contains the number of inbound frames which
were chosen to be discarded in this EVC for this
Measurement Interval.ro Counter64 .1.3.6.1.4.1.7483.6.143.2.3.1.1.15 |
tnEthSoamPmEvcHistoryStatsDiscardBytesTxThis object contains the number of outbound bytes which
were chosen to be discarded in this EVC for this
Measurement Interval.ro Counter64 .1.3.6.1.4.1.7483.6.143.2.3.1.1.16 |
tnEthSoamPmEvcHistoryStatsDiscardBytesRxThis object contains the number of inbound bytes which
were chosen to be discarded in this EVC for this
Measurement Interval.ro Counter64 .1.3.6.1.4.1.7483.6.143.2.3.1.1.17 |
tnEthSoamPmEceStatsObjects OBJECT IDENTIFIER .1.3.6.1.4.1.7483.6.143.2.4 |
tnEthSoamPmEceHistoryStatsTableThis table contains the results for history Measurement
Intervals in a SOAM EVC Extention (ECE) Measurement session.
It provides port statistics for the UNI ports of EVC.
Rows of this table object are created automatically
by the SNMP Agent when the ECE Measurement session is running and a
Measurement Interval is completed.
Each row in the table represents the history statistics for a ECE
Measurement session availability Measurement Interval for the defined
ECE.
32 completed Measurement Intervals are to be supported. If
there are at least 32 rows in the table and a new Measurement Interval
completes and a new row is to be added to the table, the oldest completed
Measurement Interval is deleted (row deletion).
The rows and objects in this table are to be persistent upon reboot
or restart of a device if tnEthSoamPmSessionCfgStorageMode is enabled
for tnEthSoamPmSessionCfgType of 'ece' SEQUENCE OF TnEthSoamPmEceHistoryStatsEntry .1.3.6.1.4.1.7483.6.143.2.4.1 |
tnEthSoamPmEceHistoryStatsEntryThe conceptual row of tnEthSoamPmEceHistoryStatsTable TnEthSoamPmEceHistoryStatsEntry .1.3.6.1.4.1.7483.6.143.2.4.1.1 |
tnEthSoamPmEceHistoryStatsIndexThe index for the Measurement Interval within this PM session.
Measurement Interval indexes are assigned sequentially by
the device. The first Measurement Interval that occurs after
the session is started is assigned index 1.
Referential integrity is necessary, i.e., the index needs to be
persistent upon a reboot or restart of a device. The index
is never reused while this session is active until it wraps to zero.
The index value keeps increasing up to that time. Unsigned32 .1.3.6.1.4.1.7483.6.143.2.4.1.1.1 |
tnEthSoamPmEceHistoryStatsEndTimeThe time that this Measurement Interval ended.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.7483.6.143.2.4.1.1.2 |
tnEthSoamPmEceHistoryStatsElapsedTimeThe time that this Measurement Interval has been running, in 0.01
seconds.ro TimeInterval (SNMPv2-TC) .1.3.6.1.4.1.7483.6.143.2.4.1.1.3 |
tnEthSoamPmEceHistoryStatsGreenFramesTxThis object contains the number of outbound frames within
the CIR / CBS compliance level in this ECE for this
Measurement Interval.ro Counter64 .1.3.6.1.4.1.7483.6.143.2.4.1.1.4 |
tnEthSoamPmEceHistoryStatsGreenFramesRxThis object contains the number of inbound frames
within the CIR / CBS compliance level in this
ECE for this Measurement Interval.ro Counter64 .1.3.6.1.4.1.7483.6.143.2.4.1.1.5 |
tnEthSoamPmEceHistoryStatsGreenBytesTxThis object contains the number of outbound bytes, where
frames are within the CIR / CBS compliance level in this
ECE for this Measurement Interval.ro Counter64 .1.3.6.1.4.1.7483.6.143.2.4.1.1.6 |
tnEthSoamPmEceHistoryStatsGreenBytesRxThis object contains the number of inbound bytes, where
frames are within the CIR / CBS compliance level in this
ECE for this Measurement Interval.ro Counter64 .1.3.6.1.4.1.7483.6.143.2.4.1.1.7 |
tnEthSoamPmEceHistoryStatsYellowFramesTxThis object contains the number of outbound frames
exceeding the CIR/CBS but within the EIR/EBS
in this ECE for this Measurement Interval.ro Counter64 .1.3.6.1.4.1.7483.6.143.2.4.1.1.8 |
tnEthSoamPmEceHistoryStatsYellowFramesRxThis object contains the number of inbound frames
exceeding the CIR/CBS but within the EIR/EBS
in this ECE for this Measurement Interval.ro Counter64 .1.3.6.1.4.1.7483.6.143.2.4.1.1.9 |
tnEthSoamPmEceHistoryStatsYellowBytesTxThis object contains the number of outbound bytes, where
frames exceed the CIR/CBS but are within the EIR/EBS
in this ECE for this Measurement Interval.ro Counter64 .1.3.6.1.4.1.7483.6.143.2.4.1.1.10 |
tnEthSoamPmEceHistoryStatsYellowBytesRxThis object contains the number of inbound bytes, where
frames exceed the CIR/CBS but are within the EIR/EBS
in this ECE for this Measurement Interval.ro Counter64 .1.3.6.1.4.1.7483.6.143.2.4.1.1.11 |
tnEthSoamPmEceHistoryStatsRedFramesRxThis object contains the number of inbound frames
not conforming to either the CIR/CBS or the EIR/EBS
in this ECE for this Measurement Interval.ro Counter64 .1.3.6.1.4.1.7483.6.143.2.4.1.1.12 |
tnEthSoamPmEceHistoryStatsRedBytesRxThis object contains the number of inbound bytes, where
frames do not conform to either the CIR/CBS or the EIR/EBS
in this ECE for this Measurement Interval.ro Counter64 .1.3.6.1.4.1.7483.6.143.2.4.1.1.13 |
tnEthSoamPmEceHistoryStatsDiscardFramesTxThis object contains the number of outbound frames which
were chosen to be discarded in this ECE for this
Measurement Interval.ro Counter64 .1.3.6.1.4.1.7483.6.143.2.4.1.1.14 |
tnEthSoamPmEceHistoryStatsDiscardFramesRxThis object contains the number of inbound frames which
were chosen to be discarded in this ECE for this
Measurement Interval.ro Counter64 .1.3.6.1.4.1.7483.6.143.2.4.1.1.15 |
tnEthSoamPmEceHistoryStatsDiscardBytesTxThis object contains the number of outbound bytes which
were chosen to be discarded in this ECE for this
Measurement Interval.ro Counter64 .1.3.6.1.4.1.7483.6.143.2.4.1.1.16 |
tnEthSoamPmEceHistoryStatsDiscardBytesRxThis object contains the number of inbound bytes which
were chosen to be discarded in this ECE for this
Measurement Interval.ro Counter64 .1.3.6.1.4.1.7483.6.143.2.4.1.1.17 |
tnEthSoamPmNotificationMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.7483.6.143.3 |