TROPIC-SYSTEM-MIB
AI MIB Summary
The TROPIC-SYSTEM-MIB provides standard SNMP access to Nokia network element system-level attributes, including device identity, uptime, contact information, and operational status. It enables centralized monitoring of core system health metrics such as CPU utilization, memory usage, and interface state transitions across TROPIC-based Nokia infrastructure.
The system MIB for Nokia network elements.
Main OID:
tnSystemMibModule.1.3.6.1.4.1.7483.1.1.2.1.1
1049
Objects
Active
Status
11
Dependencies
Imported Objects
Objects
1049 total| Object Name |
|---|
tnSystemMibModuleThe system MIB for Nokia network elements. MODULE-IDENTITY .1.3.6.1.4.1.7483.1.1.2.1.1 |
tnSystemConf OBJECT IDENTIFIER .1.3.6.1.4.1.7483.2.1.1.1 |
tnSystemGroups OBJECT IDENTIFIER .1.3.6.1.4.1.7483.2.1.1.1.1 |
tnSystemBasicsGroupA collection of objects providing basic system extensions. Unknown .1.3.6.1.4.1.7483.2.1.1.1.1.1 |
tnSystemControlNetworkGroupA collection of objects providing basic system extensions. Unknown .1.3.6.1.4.1.7483.2.1.1.1.1.2 |
tnSystemRedundancyGroupA collection of objects providing basic system extensions. Unknown .1.3.6.1.4.1.7483.2.1.1.1.1.3 |
tnSystemDiscoveryGroupA collection of objects providing System Discovery. Unknown .1.3.6.1.4.1.7483.2.1.1.1.1.4 |
tnSystemLoggingGroup. Unknown .1.3.6.1.4.1.7483.2.1.1.1.1.5 |
tnSystemBackupAndRestoreGroup. Unknown .1.3.6.1.4.1.7483.2.1.1.1.1.6 |
tnSysNtpGroup. Unknown .1.3.6.1.4.1.7483.2.1.1.1.1.7 |
tnSysNtpServerGroup. Unknown .1.3.6.1.4.1.7483.2.1.1.1.1.8 |
tnSnmpTargetAddressGroup. Unknown .1.3.6.1.4.1.7483.2.1.1.1.1.9 |
tnSyslogGroup. Unknown .1.3.6.1.4.1.7483.2.1.1.1.1.10 |
tnSysTimingGroup. Unknown .1.3.6.1.4.1.7483.2.1.1.1.1.11 |
tnSysFeaturesGroup. Unknown .1.3.6.1.4.1.7483.2.1.1.1.1.12 |
tnSysFaultCorrelationGroup. Unknown .1.3.6.1.4.1.7483.2.1.1.1.1.13 |
tnSysErrorHandlingGroup. Unknown .1.3.6.1.4.1.7483.2.1.1.1.1.14 |
tnSysSecurityGroup. Unknown .1.3.6.1.4.1.7483.2.1.1.1.1.15 |
tnSysTransferLogGroup. Unknown .1.3.6.1.4.1.7483.2.1.1.1.1.16 |
tnSysIpAclSysDefaultGroup. Unknown .1.3.6.1.4.1.7483.2.1.1.1.1.17 |
tnSysIpAclPatternScalarsGroup. Unknown .1.3.6.1.4.1.7483.2.1.1.1.1.18 |
tnSysIpAclPatternGroup. Unknown .1.3.6.1.4.1.7483.2.1.1.1.1.19 |
tnSysIpAclFilterScalarsGroup. Unknown .1.3.6.1.4.1.7483.2.1.1.1.1.20 |
tnSysIpAclFilterGroup. Unknown .1.3.6.1.4.1.7483.2.1.1.1.1.21 |
tnSysIpAclInterfaceScalarsGroup. Unknown .1.3.6.1.4.1.7483.2.1.1.1.1.22 |
tnSysIpAclInterfaceGroup. Unknown .1.3.6.1.4.1.7483.2.1.1.1.1.23 |
tnSysNtpServerIdStatsGroup. Unknown .1.3.6.1.4.1.7483.2.1.1.1.1.24 |
tnSysFtpServerGroup. Unknown .1.3.6.1.4.1.7483.2.1.1.1.1.25 |
tnSysNtpServerAuthenticationScalarsGroup. Unknown .1.3.6.1.4.1.7483.2.1.1.1.1.26 |
tnSysNtpServerAuthenticationGroup. Unknown .1.3.6.1.4.1.7483.2.1.1.1.1.27 |
tnSysIpAclNetIfFilterScalarsGroup. Unknown .1.3.6.1.4.1.7483.2.1.1.1.1.28 |
tnSysIpAclNetIfFilterGroup. Unknown .1.3.6.1.4.1.7483.2.1.1.1.1.29 |
tnNeDiscoveryScalarsGroup. Unknown .1.3.6.1.4.1.7483.2.1.1.1.1.30 |
tnNeDiscoveryGroup. Unknown .1.3.6.1.4.1.7483.2.1.1.1.1.31 |
tnSysOtdrScanSystemProfileScalarsGroup. Unknown .1.3.6.1.4.1.7483.2.1.1.1.1.32 |
tnSysOtdrScanSystemProfileGroup. Unknown .1.3.6.1.4.1.7483.2.1.1.1.1.33 |
tnSysOtdrScanTransferGroup. Unknown .1.3.6.1.4.1.7483.2.1.1.1.1.34 |
tnClusterGroup. Unknown .1.3.6.1.4.1.7483.2.1.1.1.1.35 |
tnSysPmFetchBulkGroup. Unknown .1.3.6.1.4.1.7483.2.1.1.1.1.36 |
tnSysDebugTransferGroup. Unknown .1.3.6.1.4.1.7483.2.1.1.1.1.37 |
tnSysLicenseInvGroup. Unknown .1.3.6.1.4.1.7483.2.1.1.1.1.38 |
tnSysLinuxGroup. Unknown .1.3.6.1.4.1.7483.2.1.1.1.1.40 |
tnSysIpAclIpv6SysDefaultGroup. Unknown .1.3.6.1.4.1.7483.2.1.1.1.1.41 |
tnSysFileInitializationGroup. Unknown .1.3.6.1.4.1.7483.2.1.1.1.1.42 |
tnSysOtdrScanSystemProfileMScalarsGroup. Unknown .1.3.6.1.4.1.7483.2.1.1.1.1.43 |
tnSysOtdrScanSystemProfileMGroup. Unknown .1.3.6.1.4.1.7483.2.1.1.1.1.44 |
tnSysSecurityScalarsGroup. Unknown .1.3.6.1.4.1.7483.2.1.1.1.1.45 |
tnSysIpAclIpv6PatternScalarsGroup. Unknown .1.3.6.1.4.1.7483.2.1.1.1.1.46 |
tnSysIpAclIpv6PatternGroup. Unknown .1.3.6.1.4.1.7483.2.1.1.1.1.47 |
tnSysIpAclIpv6FilterScalarsGroup. Unknown .1.3.6.1.4.1.7483.2.1.1.1.1.48 |
tnSysIpAclIpv6FilterGroup. Unknown .1.3.6.1.4.1.7483.2.1.1.1.1.49 |
tnSysIpAclIpv6InterfaceScalarsGroup. Unknown .1.3.6.1.4.1.7483.2.1.1.1.1.50 |
tnSysIpAclIpv6InterfaceGroup. Unknown .1.3.6.1.4.1.7483.2.1.1.1.1.51 |
tnSysIpv6AclNetIfFilterScalarsGroup. Unknown .1.3.6.1.4.1.7483.2.1.1.1.1.52 |
tnSysIpv6AclNetIfFilterGroup. Unknown .1.3.6.1.4.1.7483.2.1.1.1.1.53 |
tnSysIpAclEthIfFilterScalarsGroup. Unknown .1.3.6.1.4.1.7483.2.1.1.1.1.54 |
tnSysIpAclEthIfFilterGroup. Unknown .1.3.6.1.4.1.7483.2.1.1.1.1.55 |
tnSysIpv6AclEthIfFilterScalarsGroup. Unknown .1.3.6.1.4.1.7483.2.1.1.1.1.56 |
tnSysIpv6AclEthIfFilterGroup. Unknown .1.3.6.1.4.1.7483.2.1.1.1.1.57 |
tnSysBtInterfaceGroup. Unknown .1.3.6.1.4.1.7483.2.1.1.1.1.58 |
tnSysOtdrScanResultsTransferGroup. Unknown .1.3.6.1.4.1.7483.2.1.1.1.1.59 |
tnSysLicenseMgrGroup. Unknown .1.3.6.1.4.1.7483.2.1.1.1.1.60 |
tnLicenseEntityGroup. Unknown .1.3.6.1.4.1.7483.2.1.1.1.1.61 |
tnSysKeyStoreServiceGroup. Unknown .1.3.6.1.4.1.7483.2.1.1.1.1.62 |
tnSysKeyStoreCertInfoGroup. Unknown .1.3.6.1.4.1.7483.2.1.1.1.1.63 |
tnSysBgpPeerGroup. Unknown .1.3.6.1.4.1.7483.2.1.1.1.1.64 |
tnSysDiscoverMeGroupDiscover Me related system objects. Unknown .1.3.6.1.4.1.7483.2.1.1.1.1.65 |
tnSyslogServerGroup. Unknown .1.3.6.1.4.1.7483.2.1.1.1.1.66 |
tnLicenseEntitlementGroup. Unknown .1.3.6.1.4.1.7483.2.1.1.1.1.67 |
tnPctObjsGroup. Unknown .1.3.6.1.4.1.7483.2.1.1.1.1.68 |
tnHostKeyGroup. Unknown .1.3.6.1.4.1.7483.2.1.1.1.1.69 |
tnSshPrivKeyGroup. Unknown .1.3.6.1.4.1.7483.2.1.1.1.1.70 |
tnSysNESshKeyGroup. Unknown .1.3.6.1.4.1.7483.2.1.1.1.1.71 |
tnNESshKeyGroup. Unknown .1.3.6.1.4.1.7483.2.1.1.1.1.72 |
tnTransferSysLogGroup. Unknown .1.3.6.1.4.1.7483.2.1.1.1.1.73 |
tnSysHealthCareGroup. Unknown .1.3.6.1.4.1.7483.2.1.1.1.1.74 |
tnSshCiphersGroup. Unknown .1.3.6.1.4.1.7483.2.1.1.1.1.75 |
tnSshHostKeyGroup. Unknown .1.3.6.1.4.1.7483.2.1.1.1.1.76 |
tnSshMacsGroup. Unknown .1.3.6.1.4.1.7483.2.1.1.1.1.77 |
tnSshKexGroup. Unknown .1.3.6.1.4.1.7483.2.1.1.1.1.78 |
tnSshPubKeyGroup. Unknown .1.3.6.1.4.1.7483.2.1.1.1.1.79 |
tnTlsProfileGroup. Unknown .1.3.6.1.4.1.7483.2.1.1.1.1.80 |
tnSysTrapThrottlingGroup. Unknown .1.3.6.1.4.1.7483.2.1.1.1.1.81 |
tnSanListGroup. Unknown .1.3.6.1.4.1.7483.2.1.1.1.1.82 |
tnCsrSanListGroup. Unknown .1.3.6.1.4.1.7483.2.1.1.1.1.83 |
tnSanListAuthGroup. Unknown .1.3.6.1.4.1.7483.2.1.1.1.1.84 |
tnSysNmsIpListGroup. Unknown .1.3.6.1.4.1.7483.2.1.1.1.1.85 |
tnOcspProfileGroup. Unknown .1.3.6.1.4.1.7483.2.1.1.1.1.86 |
tnSysDnsServerGroup. Unknown .1.3.6.1.4.1.7483.2.1.1.1.1.87 |
tnTransferPMDiscoveryGroup. Unknown .1.3.6.1.4.1.7483.2.1.1.1.1.88 |
tnSysIpAclScalarsGroup. Unknown .1.3.6.1.4.1.7483.2.1.1.1.1.89 |
tnSysIpAclGroup. Unknown .1.3.6.1.4.1.7483.2.1.1.1.1.90 |
tnSysIpv6AclGroup. Unknown .1.3.6.1.4.1.7483.2.1.1.1.1.91 |
tnSysIpv6AclScalarsGroup. Unknown .1.3.6.1.4.1.7483.2.1.1.1.1.92 |
tnSshProfileGroup. Unknown .1.3.6.1.4.1.7483.2.1.1.1.1.93 |
tnSystemCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.7483.2.1.1.1.2 |
tnSystemComplianceThe compliance statement for System Extensions. Unknown .1.3.6.1.4.1.7483.2.1.1.1.2.1 |
tnSystemObjs OBJECT IDENTIFIER .1.3.6.1.4.1.7483.2.1.1.2 |
tnSysBasics OBJECT IDENTIFIER .1.3.6.1.4.1.7483.2.1.1.2.1 |
tnSysDescrSystem's Description.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.1.1 |
tnSysTelnetPortSystem's Telnet Port.ro Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.1.2 |
tnSysHttpPortSystem's Http Port.ro Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.1.3 |
tnSysDateAndTimeSystem's Date and Time.rw DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.7483.2.1.1.2.1.4 |
tnSysResetSystem reset.rw TropicResetType (TROPIC-TC) .1.3.6.1.4.1.7483.2.1.1.2.1.5 |
tnSysMIBVersionThe current version of the Nokia proprietary MIBs.ro SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.1.6 |
tnSysRingIDCurrent configurable range: 0 to 62.ro Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.1.7 |
tnSysNetworkElementIDCurrent configurable range: 0 to 30.rw Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.1.8 |
tnSysAINSDebounceTimeThis attribute must be set in multiples of 60s. Current configurable range: 1m to 96h 0m.rw Unsigned32 UNITS "seconds" .1.3.6.1.4.1.7483.2.1.1.2.1.9 |
tnSysSonetSdhModeSonet/SDH Mode.rw Enumeration .1.3.6.1.4.1.7483.2.1.1.2.1.10 |
tnSysAlarmReportingControlAlarm reporting control.rw Enumeration .1.3.6.1.4.1.7483.2.1.1.2.1.11 |
tnSysWavelengthTrackerWaveKeySpaceCurrent configurable range: 0 to 255.rw Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.1.12 |
tnSysSecureModeSecure mode inherited from 1696R. For 1830 secure mode, use tnSysSecurityMode.ro Enumeration .1.3.6.1.4.1.7483.2.1.1.2.1.13 |
tnSysExtendedTemperatureRangeExtended temperature range for 1830 PSS-1.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.1.1.2.1.16 |
tnSysTemperatureInCelsius.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.1.1.2.1.17 |
tnSysNameThis is to replace sysName, so that the system ID may have characters outside of those supported by DisplayString.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.1.18 |
tnSysEquipmentControllerCapacityThe capacity of the storage medium of the Equipment Controller cards in the node.rw AluWdmCardCapacity (TROPIC-TC) .1.3.6.1.4.1.7483.2.1.1.2.1.19 |
tnSysFirstLevelControllerCapacityThe capacity of the storage medium of the First Level Controller cards in the node.rw AluWdmCardCapacity (TROPIC-TC) .1.3.6.1.4.1.7483.2.1.1.2.1.20 |
tnSysMatrix0CompactCapacityThe capacity of the storage medium of the Matrix0 Compact cards in the node.rw AluWdmCardCapacity (TROPIC-TC) .1.3.6.1.4.1.7483.2.1.1.2.1.21 |
tnSysUniversalMatrixFirstLevelControllerCapacityThe capacity of the storage medium of the Universal Matrix First Level Controller cards in the node.rw AluWdmCardCapacity (TROPIC-TC) .1.3.6.1.4.1.7483.2.1.1.2.1.22 |
tnSysTimeOffsetTimeZone.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.1.23 |
tnSysSwitchIdAn identifier that uniquely identifies a switching domain on the PSS. TnSwitchID (TN-TC-MIB) .1.3.6.1.4.1.7483.2.1.1.2.1.26 |
tnSysFipsSquelchModeFIPS Squelch mode. If set to FIPS, it causes transmission loss on all encrypted links if FIPS selftest fails.rw Enumeration .1.3.6.1.4.1.7483.2.1.1.2.1.27 |
tnSysOtdrListOfFileNamesThis contains a list of all the OTDR file names that are stored on NE. The maximum number of files is 32. The file names are separated by newlines. The format of a file name is: Filenamewhichis34charslong_sh_sl_pt_yyyymmdd_hr-min-sec Here is an example: profile1_1_6_1_20140416_21-20-3.ro SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.1.28 |
tnSysOtdrFileCountsThis returns the number of files under OTDR.ro Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.1.29 |
tnSysAltitudeThis is used for FAN control and for filter clogging rate calculation.rw Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.1.30 |
tnSysThermalShutdownAutotimerConfigures the time when the mode of thermal is automatically restarted.rw Integer32 (-1..3600) UNITS "seconds" .1.3.6.1.4.1.7483.2.1.1.2.1.31 |
tnSysDisplayShelfLabel.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.1.1.2.1.32 |
tnSysPMFineGranularityControlEnables network element for fine granularity PM operation.rw Enumeration .1.3.6.1.4.1.7483.2.1.1.2.1.33 |
tnSysFmReadEnables System Ready notification.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.1.1.2.1.34 |
tnSysPMStreamingServerControlEnables network element for streaming server control PM operation.rw Enumeration .1.3.6.1.4.1.7483.2.1.1.2.1.35 |
tnSysSlotMigrationControlSlot Migration Control.rw Enumeration .1.3.6.1.4.1.7483.2.1.1.2.1.36 |
tnSysFlexGridClusterOcsAddDropEnabledEnables the OCS/Cluster flex.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.1.1.2.1.37 |
tnSysFilterCheckTimeTime in seconds when the filter check is executed everyday.rw Unsigned32 UNITS "seconds" .1.3.6.1.4.1.7483.2.1.1.2.1.38 |
tnSysCNLinkPhysicalIfIndex.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.1.39 |
tnSysUserlabelUser Label NE identifier.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.1.40 |
tnSysOpenAgentControlEnable/Disable the OpenAgent functionality on the NE.rw Enumeration .1.3.6.1.4.1.7483.2.1.1.2.1.41 |
tnSysUnkeyedDanglingOchAddDropEnabledIndicates if the unkeyed dangling optical channel add/drop capability is enabled. If false, unkeyed OCh add/drop cross-connections to SFD channel ports, PSC add/drop ports and MCS add/drop ports are not allowed.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.1.1.2.1.42 |
tnSysNetWorkTraceV3SecurityUserNetwork trace V3 SecurityUser.rw Enumeration .1.3.6.1.4.1.7483.2.1.1.2.1.43 |
tnSysScotV3SecurityUserPowerM V3 SecurityUser.rw Enumeration .1.3.6.1.4.1.7483.2.1.1.2.1.44 |
tnSysTL1EnableEnable/Disable the TL1 connectivity on the NE.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.1.1.2.1.45 |
tnSysLMEnabledEnable/Disable the CLM Functionality.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.1.1.2.1.46 |
tnSysAlienChannelLicensingEnabledEnable/Disable the Alien channel licensing.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.1.1.2.1.47 |
tnSysDebugEnable/Disable the access to debug port on network element.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.1.1.2.1.48 |
tnSysClusterV3SecurityUserCluster V3 SecurityUser. compatibilityMode - In Compatibility mode the Cluster NE-to-NE Communication allow communication with authentication and privacy, but with fixed passwords. The compatibility mode shall be used when not all NEs in a cluster running a release supporting the Cluster NE-to-NE Communication in the secure mode. This ensures communication while upgrade (or downgrade) scenarios. If all NEs in a cluster supporting the secure mode then the secure mode should be used. secureMode - The secure mode uses authentication and privacy with configurable passwords only. Secure mode is the recommended mode during normal operation. Switching to secure mode while not all network elements are upgraded to a release supporting Cluster NE-to-NE Communication security, or while passwords are not set on all network elements leads to communication interruptions.rw Enumeration .1.3.6.1.4.1.7483.2.1.1.2.1.49 |
tnSysSyncModeetsi/ansi Mode for Synchronization.rw Enumeration .1.3.6.1.4.1.7483.2.1.1.2.1.51 |
tnSysPMModeetsi/ansi Mode for PM.rw Enumeration .1.3.6.1.4.1.7483.2.1.1.2.1.52 |
tnSysShelfLatitudeShelf latitude. Free format to store the latitude part of GPS coordinates.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.1.53 |
tnSysShelfLongitudeShelf longitude. Free format to store the longitude part of GPS coordinates.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.1.54 |
tnSysAlmProfName.rw OCTET STRING .1.3.6.1.4.1.7483.2.1.1.2.1.55 |
tnSysBgpAsnAutonomous System Number which will enable BGP on the NE. Setting the ASN to 0 to disable BGP on the NE. Any ASN can be used, but the following ASNs will be for private use (RFC 6996) 64512 - 65534 (16-bit ASN) 4200000000 - 4294967294 (32-bit ASN).rw Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.1.56 |
tnSysBgpLocalRouterId.ro IpAddress .1.3.6.1.4.1.7483.2.1.1.2.1.57 |
tnSysNodeIdLabel.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.1.58 |
tnSysNodeNumber.rw Integer32 .1.3.6.1.4.1.7483.2.1.1.2.1.59 |
tnSysNodeCLLI.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.1.60 |
tnSysNodeTemplate.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.1.61 |
tnSysCustomerApplicationMode.rw Enumeration .1.3.6.1.4.1.7483.2.1.1.2.1.64 |
tnSysMDCliEnable/Disable the MDCLI functionality.rw Enumeration .1.3.6.1.4.1.7483.2.1.1.2.1.65 |
tnSysMultiShelfMode.rw Enumeration .1.3.6.1.4.1.7483.2.1.1.2.1.66 |
tnSysMultiShelfConfigList.ro SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.1.67 |
tnSysMultiShelfUnknownList.ro SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.1.68 |
tnSysMultiShelfMissingList.ro SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.1.69 |
tnSysPrompt.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.1.70 |
tnSysPromptType.rw Enumeration .1.3.6.1.4.1.7483.2.1.1.2.1.71 |
tnSysShelfAltitudeShelf altitude. Free format to store the altitude part of GPS coordinates.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.1.72 |
tnSysTacacsSourceIpMode.rw TropicSourceIpModeValue (TROPIC-TC) .1.3.6.1.4.1.7483.2.1.1.2.1.73 |
tnSysRadiusSourceIpMode.rw TropicSourceIpModeValue (TROPIC-TC) .1.3.6.1.4.1.7483.2.1.1.2.1.74 |
tnSysFtpSourceIpMode.rw TropicSourceIpModeValue (TROPIC-TC) .1.3.6.1.4.1.7483.2.1.1.2.1.75 |
tnSysSftpSourceIpMode.rw TropicSourceIpModeValue (TROPIC-TC) .1.3.6.1.4.1.7483.2.1.1.2.1.76 |
tnSysHttpSourceIpMode.rw TropicSourceIpModeValue (TROPIC-TC) .1.3.6.1.4.1.7483.2.1.1.2.1.77 |
tnSysHttpsSourceIpMode.rw TropicSourceIpModeValue (TROPIC-TC) .1.3.6.1.4.1.7483.2.1.1.2.1.78 |
tnSysSnmpSourceIpMode.rw TropicSourceIpModeValue (TROPIC-TC) .1.3.6.1.4.1.7483.2.1.1.2.1.79 |
tnSysSyslogSourceIpMode.rw TropicSourceIpModeValue (TROPIC-TC) .1.3.6.1.4.1.7483.2.1.1.2.1.80 |
tnSysSshSourceIpMode.rw TropicSourceIpModeValue (TROPIC-TC) .1.3.6.1.4.1.7483.2.1.1.2.1.81 |
tnSysAutoTurnUpActiveTemplate.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.1.82 |
tnSysAuthenticationOrder.rw Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.1.83 |
tnSysAuthRejectOption.rw Enumeration .1.3.6.1.4.1.7483.2.1.1.2.1.84 |
tnSysAutoTurnUpActiveTemplateForce.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.1.1.2.1.85 |
tnSysNtpSourceIpMode.rw TropicSourceIpModeValue (TROPIC-TC) .1.3.6.1.4.1.7483.2.1.1.2.1.86 |
tnSysFeatureAutoTurnUpConfigure to enabled before automation line(s) can be enabled. Configure to disabled after all automation line(s) have been disabled.rw AluWdmDisabledEnabled (TROPIC-TC) .1.3.6.1.4.1.7483.2.1.1.2.1.87 |
tnSysDelayResetNEFor Transient Condition: UsrColdResetPend (cleared automatically when controller comes back up active).rw Integer32 .1.3.6.1.4.1.7483.2.1.1.2.1.88 |
tnSysDelayRebootMinimize the number of (warm) reboots during initial configuration (non-ZTP).rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.1.1.2.1.89 |
tnSysNmsUserNameThe Nms user name.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.1.90 |
tnSysVersionPatchId.ro Integer32 .1.3.6.1.4.1.7483.2.1.1.2.1.91 |
tnSysVersionPatchDescr.ro SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.1.92 |
tnSysCustomerLifeCycleState.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.1.93 |
tnSysUSBInstalltrue - to change boot order from USB port first and allow SW installation from USB port. false - to disable the USB port access for SW installation and to change the boot order to SSD first.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.1.1.2.1.94 |
tnSysNmsIpVerifyState.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.1.1.2.1.95 |
tnSysOcspSourceIpModeOnline Certificate Status Protocol IP Mode.rw TropicSourceIpModeValue (TROPIC-TC) .1.3.6.1.4.1.7483.2.1.1.2.1.96 |
tnSysDnsSourceIpModeDomain Name System IP Mode.rw TropicSourceIpModeValue (TROPIC-TC) .1.3.6.1.4.1.7483.2.1.1.2.1.97 |
tnSysOtcWaitTimeAfterPowerChangeThis attribute indicates how long the NMS shall wait after changing the output power of an external transponder managed with optical terminal control.ro Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.1.98 |
tnSysDHCPClassNameDHCP Class Name.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.1.99 |
tnSysDHCPMatchStringDHCP Match String.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.1.100 |
tnSysKeyLicenseUnique anti-theft license key stored on the NE.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.1.101 |
tnSysHwIfModeThis parameter is used to select the variants of hardware interface assignments. The configuration operation is allowed only when the impacted ports (port speed is changed after config) have the interface type='unassigned'. nomate - the system has X1-X6 and C1-C24 ports - default value. mate100g - the system has X1-X6, C1-C24, M1(t24ps1), and M1 (t24ps2) ports. In this mode, C10-C15 allows only the interface type with the port rate equal or lower than 10Gbps When changing from nomate to mate100g, C10-C15 must have the interface type='unassigned'; When changing from mate100g to nomate, C10-C15, M1 (t24ps1) and M1 (t24ps2) must have the interface type='unassigned'rw Enumeration .1.3.6.1.4.1.7483.2.1.1.2.1.102 |
tnSysIpAclNextIndexThis parameter indicates the next available SNMP index for a IPACL rule to be created in tnSysIpAclTable. If there is no available index, zero shall be used.ro Integer32 .1.3.6.1.4.1.7483.2.1.1.2.1.103 |
tnSysIpv6AclNextIndexThis parameter indicates the next available SNMP index for a IPACL rule to be created in tnSysIpv6AclTable. If there is no available index, zero shall be used.ro Integer32 .1.3.6.1.4.1.7483.2.1.1.2.1.104 |
tnSysDHCPClass.rw Enumeration .1.3.6.1.4.1.7483.2.1.1.2.1.105 |
tnSysProtocolIpMode.rw TropicSourceIpModeValue (TROPIC-TC) .1.3.6.1.4.1.7483.2.1.1.2.1.106 |
tnSysMultiShelfAvailableList.ro SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.1.107 |
tnSysPerformanceMemoryTotal.ro Integer32 .1.3.6.1.4.1.7483.2.1.1.2.1.108 |
tnSysPerformanceMemoryUsed.ro Integer32 .1.3.6.1.4.1.7483.2.1.1.2.1.109 |
tnSysPerformanceMemoryUsedPercentage.ro Integer32 .1.3.6.1.4.1.7483.2.1.1.2.1.110 |
tnSysPerformanceTime.ro SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.1.111 |
tnSysPerformanceCPUStatsPercentagesFormat: utilization%-user%-system%-nice%-I/O Wait%-Irq%-SoftIrq%-Idle%. Example: 4.68-1.92-2.70-0.00-0.00-0.06-0.00-95.32ro SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.1.112 |
tnSysPowerPower state of the system.rw Enumeration .1.3.6.1.4.1.7483.2.1.1.2.1.113 |
tnSysKeyStoreCertExpiration.rw Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.1.114 |
tnSysNumOspfV2AreaIndependentLsas.ro Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.1.115 |
tnSysNumOspfV3AreaIndependentLsas.ro Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.1.116 |
tnSysBgpAdminDistance.rw Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.1.117 |
tnSysControlNetwork OBJECT IDENTIFIER .1.3.6.1.4.1.7483.2.1.1.2.2 |
tnSysIpAddressSystem's IP Address.ro IpAddress .1.3.6.1.4.1.7483.2.1.1.2.2.1 |
tnSysSubnetMaskSubnet Mask.ro IpAddress .1.3.6.1.4.1.7483.2.1.1.2.2.2 |
tnSysConfiguredIpAddress.rw IpAddress .1.3.6.1.4.1.7483.2.1.1.2.2.3 |
tnSysConfiguredSubnetMask.rw IpAddress .1.3.6.1.4.1.7483.2.1.1.2.2.4 |
tnSysConfiguredSnmpSourceWhen set to false, SNMP requests can be made using any of the NEs interface IP addresses or Loopback IP address. The source IP address in SNMP trap/reply messages shall be the interface IP address on which the packet leaves the NE. Hence it is the SNMP clients responsibility to be able to associate an NE with multiple IP addresses. When set to true, SNMP requests can be made using ONLY the NEs Loopback IP address. The source IP address in SNMP trap/reply messages shall be fixed as the Loopback IP. Hence SNMP clients need only have a single association to the NEs Loopback IP address.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.1.1.2.2.5 |
tnSysConfiguredOcsIpAddressOptical Cross-connect System (OCS) IP address. R9.0: We now support two OCS Nodes(WDMx2OCS) and this mib is meant for OCS node.rw IpAddress .1.3.6.1.4.1.7483.2.1.1.2.2.6 |
tnSysConfiguredOcs2IpAddressOptical Cross-connect System (OCS) IP address. R9.0: we now support upto three OCS Nodes(WDMx3OCS) and this attribute is meant for 2nd OCS node.rw IpAddress .1.3.6.1.4.1.7483.2.1.1.2.2.7 |
tnSysConfiguredOcs3IpAddressOptical Cross-connect System (OCS) IP address. R9.0: we now support upto three OCS Nodes(WDMx3OCS) and this mib is meant for 3rd OCS node.rw IpAddress .1.3.6.1.4.1.7483.2.1.1.2.2.8 |
tnSysOcs1LinkStatusShows the link status of 1st Optical Cross-connect System(OCS).ro AluWdmOcsLinkStatus .1.3.6.1.4.1.7483.2.1.1.2.2.9 |
tnSysOcs2LinkStatusShows the link status of 2nd Optical Cross-connect System(OCS).ro AluWdmOcsLinkStatus .1.3.6.1.4.1.7483.2.1.1.2.2.10 |
tnSysOcs3LinkStatusShows the link status of 3rd Optical Cross-connect System(OCS).ro AluWdmOcsLinkStatus .1.3.6.1.4.1.7483.2.1.1.2.2.11 |
tnSysConfiguredRadiusSourceWhen set to true, the radius client will only use the Loopback IP.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.1.1.2.2.12 |
tnSysConfiguredLoopbackIp1.rw IpAddress .1.3.6.1.4.1.7483.2.1.1.2.2.13 |
tnSysConfiguredLoopbackIp1SubnetMask.rw IpAddress .1.3.6.1.4.1.7483.2.1.1.2.2.14 |
tnSysConfiguredSnmpSource1When set to false, SNMP requests can be made using any of the NEs interface IP addresses or Loopback IP address. The source IP address in SNMP trap/reply messages shall be the interface IP address on which the packet leaves the NE. Hence it is the SNMP clients responsibility to be able to associate an NE with multiple IP addresses. When set to true, SNMP requests can be made using ONLY the NEs Loopback IP1 address. The source IP address in SNMP trap/reply messages shall be fixed as the Loopback IP1. Hence SNMP clients need only have a single association to the NEs Loopback IP1 address.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.1.1.2.2.15 |
tnSysConfiguredRadiusSource1When set to true, the radius client will only use the Loopback IP1.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.1.1.2.2.16 |
tnSysLoopbackIpAddress1.ro IpAddress .1.3.6.1.4.1.7483.2.1.1.2.2.17 |
tnSysLoopbackIp1SubnetMask.ro IpAddress .1.3.6.1.4.1.7483.2.1.1.2.2.18 |
tnSysConfiguredInetAddressTypeThe value specifies the type of Internet address stored in tnSysConfiguredInetAddress.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.7483.2.1.1.2.2.19 |
tnSysConfiguredInetAddressIndicates the IPv6 address of the Loopback IPrw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.7483.2.1.1.2.2.20 |
tnSysConfiguredPrefixLengthPrefix length of the IPV6 of the Loopback.rw InetAddressPrefixLength (INET-ADDRESS-MIB) .1.3.6.1.4.1.7483.2.1.1.2.2.21 |
tnSysOcsIp1PasswordThe password used to access OCS NE. When read, this attribute will return an empty string if the password has not been set and '********' if it has been set.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.2.22 |
tnSysOcsIp2PasswordThe password used to access OCS NE. When read, this attribute will return an empty string if the password has not been set and '********' if it has been set.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.2.23 |
tnSysOcsIp3PasswordThe password used to access OCS NE. When read, this attribute will return an empty string if the password has not been set and '********' if it has been set.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.2.24 |
tnSysConfiguredSnmpSourceIPv6When set to false, SNMP requests can be made using any of the NEs interface IP addresses or Loopback IPv6 address. The source IP address in SNMP trap/reply messages shall be the interface IP address on which the packet leaves the NE. Hence it is the SNMP clients responsibility to be able to associate an NE with multiple IP addresses. When set to true, SNMP requests can be made using ONLY the NEs Loopback IPv6 address. The source IP address in SNMP trap/reply messages shall be fixed as the Loopback IP. Hence SNMP clients need only have a single association to the NEs Loopback IPv6 address.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.1.1.2.2.25 |
tnSysConfiguredRadiusSourceIPv6When set to true, the radius client will only use the Loopback IPv6.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.1.1.2.2.26 |
tnSysRedundancy OBJECT IDENTIFIER .1.3.6.1.4.1.7483.2.1.1.2.3 |
tnSysRedundancyDbSynchState.ro Enumeration .1.3.6.1.4.1.7483.2.1.1.2.3.1 |
tnSysRedundancyDbResynch.rw TnCommand (TROPIC-TC) .1.3.6.1.4.1.7483.2.1.1.2.3.2 |
tnSysRedundancyDbAudit.rw TnCommand (TROPIC-TC) .1.3.6.1.4.1.7483.2.1.1.2.3.3 |
tnSysRedundancyDbClear.rw Enumeration .1.3.6.1.4.1.7483.2.1.1.2.3.4 |
tnSysRedundancyActiveCCSlot.ro Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.3.5 |
tnSysRedundancyDbInvalid.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.1.1.2.3.6 |
tnSysRedundancyMateCCReadyToProtect.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.1.1.2.3.7 |
tnSysDiscovery OBJECT IDENTIFIER .1.3.6.1.4.1.7483.2.1.1.2.4 |
tnSysDiscoveryFilename.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.4.2 |
tnSysDiscoveryMaskFor a newly commissioned network element, the default bit set is stage5.rw Bits .1.3.6.1.4.1.7483.2.1.1.2.4.3 |
tnSysDiscoveryControlControls the Discovery, i.e., starts or aborts it.rw Enumeration .1.3.6.1.4.1.7483.2.1.1.2.4.4 |
tnSysDiscoveryStatus.ro Enumeration .1.3.6.1.4.1.7483.2.1.1.2.4.5 |
tnSysDiscoveryErrorCode.ro Enumeration .1.3.6.1.4.1.7483.2.1.1.2.4.6 |
tnSysDiscoveryBinnedStatsInterval.rw Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.4.8 |
tnSysDiscoveryBinnedStatsBin.rw Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.4.9 |
tnSysDiscoveryServerProtocolThis attributes indicates the server protocol.rw AluWdmNewTransferProtocol (TROPIC-TC) .1.3.6.1.4.1.7483.2.1.1.2.4.10 |
tnSysDiscoveryServerIp.rw IpAddress .1.3.6.1.4.1.7483.2.1.1.2.4.11 |
tnSysDiscoveryServerUserIdThe userId used to access the server.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.4.12 |
tnSysDiscoveryServerPasswordThe password used to access the server. When read, this attribute will return an empty string if the password has not been set and '********' if it has been set.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.4.13 |
tnSysDiscoveryServerInetAddressTypeThe value specifies the type of Internet address stored in tnSysDiscoveryServerInetAddress.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.7483.2.1.1.2.4.14 |
tnSysDiscoveryServerInetAddressIndicates the IPv6 address of the log server.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.7483.2.1.1.2.4.15 |
tnSysDiscoveryPort.rw Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.4.16 |
tnSysDiscoveryPrevious15minBinFilesTransferIndicates the number of previous 15 min bin files that needs to be transferred.rw Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.4.17 |
tnSysDiscoveryPrevious1dayBinFilesTransferIndicates the number of previous 1 day bin files that needs to be transferred.rw Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.4.18 |
tnSysDiscoveryTransferTimeOffsetIndicates the file transfer time offset in seconds.rw Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.4.19 |
tnSysDiscoveryTransferTrapsIndicates whether the file transfer is triggered by the NE sending traps.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.1.1.2.4.20 |
tnSysLogging OBJECT IDENTIFIER .1.3.6.1.4.1.7483.2.1.1.2.5 |
tnSysLoggingCLIEach bit represents whether the appropriate logging is activated for each CLI security level.rw Bits .1.3.6.1.4.1.7483.2.1.1.2.5.1 |
tnSysLoggingSNMPEach bit represents whether the appropriate logging is activated for each SNMP security level.rw Bits .1.3.6.1.4.1.7483.2.1.1.2.5.2 |
tnSysBackupAndRestore OBJECT IDENTIFIER .1.3.6.1.4.1.7483.2.1.1.2.6 |
tnSysBackupAndRestoreCommand.rw Enumeration .1.3.6.1.4.1.7483.2.1.1.2.6.1 |
tnSysBackupAndRestoreRemoteHostIp.rw IpAddress .1.3.6.1.4.1.7483.2.1.1.2.6.2 |
tnSysBackupAndRestoreRemotePath.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.6.3 |
tnSysBackupAndRestoreStatusThis attribute indicates the status of the previously executed tnSysBackupAndRestoreCommand operation. Here are the status strings: * Success * Failed - no such record instance * Failed - timed out * Failed - invalid record size * Failed - invalid record type * Remote backup in progress * Remote restore in progress * Failed - remote path exceeds the max length of 127 characters * Failed - for restore the remote path must specify a file * Failed - restored database was corrupt or was created on a different node * Failed - cannot backup or restore while operation already in progress * Failed - backup or restore failed to complete due to a reset * Failed - restored database missing GMRE database (forced to override) * Failed - local error * Failed - network error * Failed - Remote server error * Failed - invalid database backup file * Failed - Invalid remote server IP address not set * Failed - Error * Failed - Authorization failed * Failed - File permission(s) failed * Failed - <Unknown database error code>ro SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.6.4 |
tnSysBackupAndRestoreLastBackupFilenameThis attribute indicates the filename for the last backup performed on the node. If none exists, this attribute will return an empty string. If a backup is in progress, this attribute will return an empty string.ro SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.6.5 |
tnSysBackupAndRestoreLastCommandThis is the last backup and restore command executed. If the last operation is unknown, the value of this attribute will be unknown. If a backup and restore command has not been executed since the last node reset, the value of this attribute will be noCommand.ro Enumeration .1.3.6.1.4.1.7483.2.1.1.2.6.6 |
tnSysBackupAndRestorePercentCompletedThe percent completion of the previously executed operation.ro Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.6.7 |
tnSysBackupAndRestoreLastBackupFileTimeStampThe date and time when the last backup was completed.ro Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.6.8 |
tnSysBackupAndRestoreProtocolThis attributes indicates the database Backup and restore protocol.rw AluWdmNewTransferProtocol (TROPIC-TC) .1.3.6.1.4.1.7483.2.1.1.2.6.9 |
tnSysBackupAndRestoreUserIdThe userId used to access the backup and restore server.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.6.10 |
tnSysBackupAndRestorePasswordThe password used to access the backup and restore server. When read, this attribute will return an empty string if the password has not been set and '********' if it has been set.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.6.11 |
tnSysBackupAndRestoreLastBackupFileCrc32-bit Cyclic Redundancy Code calculated over the backed-up data.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.7483.2.1.1.2.6.12 |
tnSysBackupAndRestoreRemoteHostInetAddressTypeThe value specifies the type of Internet address stored in tnSysBackupAndRestoreRemoteHostInetAddress.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.7483.2.1.1.2.6.14 |
tnSysBackupAndRestoreRemoteHostInetAddressIndicates the IPv6 address of the backup server.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.7483.2.1.1.2.6.15 |
tnSysBackupAndRestoreLocalInfoDatabase local backup information.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.7483.2.1.1.2.6.16 |
tnSysBackupAndRestoreLocalDeleteDelete local database backup.rw Enumeration .1.3.6.1.4.1.7483.2.1.1.2.6.18 |
tnSysBackupAndRestorePortThis attributes indicates the database port.rw Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.6.19 |
tnSysBackupAndRestoreFallBackTimeStampreturn the creation time of the Fallback DB.ro Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.6.20 |
tnSysNtp OBJECT IDENTIFIER .1.3.6.1.4.1.7483.2.1.1.2.7 |
tnSysNtpEnableTo enable or disable NTP client.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.1.1.2.7.1 |
tnSysNtpSynched.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.1.1.2.7.8 |
tnSysNtpServerCurrentIpAddress.ro IpAddress .1.3.6.1.4.1.7483.2.1.1.2.7.9 |
tnSysNtpDriftString.ro OCTET STRING .1.3.6.1.4.1.7483.2.1.1.2.7.11 |
tnSysNtpTimeOffsetString.ro OCTET STRING .1.3.6.1.4.1.7483.2.1.1.2.7.12 |
tnSysNtpClockModeNTP clock mode.ro Enumeration .1.3.6.1.4.1.7483.2.1.1.2.7.13 |
tnSysNtpServerCurrentInetAddressTypeThe value specifies the type of Internet address stored tnSysNtpServerCurrentInetAddress.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.7483.2.1.1.2.7.14 |
tnSysNtpServerCurrentInetAddressIndicates the IPv6 address NTP server.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.7483.2.1.1.2.7.15 |
tnSysNtpServers OBJECT IDENTIFIER .1.3.6.1.4.1.7483.2.1.1.2.8 |
tnSysNtpServerTable. SEQUENCE OF TnSysNtpServerEntry .1.3.6.1.4.1.7483.2.1.1.2.8.1 |
tnSysNtpServerEntry. TnSysNtpServerEntry .1.3.6.1.4.1.7483.2.1.1.2.8.1.1 |
tnSysNtpServerIndexFor the 1830 PSS-32, the maximum number of supported servers is 8. Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.8.1.1.1 |
tnSysNtpServerIpAddressThis attribute is configurable only when the row status has been set to createAndGo.rw IpAddress .1.3.6.1.4.1.7483.2.1.1.2.8.1.1.2 |
tnSysNtpServerRowStatus.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.7483.2.1.1.2.8.1.1.3 |
tnSysNtpServerKeyIndex.rw Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.8.1.1.4 |
tnSysNtpServerInetAddressIndicates the IPv6 address of the NTP Server.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.7483.2.1.1.2.8.1.1.5 |
tnSysNtpServerInetAddressTypeThe value specifies the type of Internet address stored in tnSysNtpServerInetAddress.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.7483.2.1.1.2.8.1.1.6 |
tnSnmpTargetAddresses OBJECT IDENTIFIER .1.3.6.1.4.1.7483.2.1.1.2.9 |
tnSnmpTargetAddrTable. SEQUENCE OF TnSnmpTargetAddrEntry .1.3.6.1.4.1.7483.2.1.1.2.9.1 |
tnSnmpTargetAddrEntry. TnSnmpTargetAddrEntry .1.3.6.1.4.1.7483.2.1.1.2.9.1.1 |
tnSnmpTargetAddrNmsStationGroupId.rw Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.9.1.1.1 |
tnSnmpTargetAddrTrapGroupId.rw Enumeration .1.3.6.1.4.1.7483.2.1.1.2.9.1.1.2 |
tnSnmpTargetAddrDisableTrapIndicates the destination based trap disable mechanism feature is on.rw Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.9.1.1.3 |
tnSyslog OBJECT IDENTIFIER .1.3.6.1.4.1.7483.2.1.1.2.10 |
tnSyslogIpAddress.rw IpAddress .1.3.6.1.4.1.7483.2.1.1.2.10.1 |
tnSyslogPort.rw Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.10.2 |
tnSyslogFacility.rw Enumeration .1.3.6.1.4.1.7483.2.1.1.2.10.3 |
tnSyslogPriority.rw Enumeration .1.3.6.1.4.1.7483.2.1.1.2.10.4 |
tnSyslogEnabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.1.1.2.10.5 |
tnSyslogInetAddressIndicates the IPv6 address of the Syslog Server.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.7483.2.1.1.2.10.6 |
tnSyslogInetAddressTypeThe value specifies the type of Internet address stored in tnSyslogInetAddress.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.7483.2.1.1.2.10.7 |
tnSyslogProtocolSyslog Transmission Protocol.rw Enumeration .1.3.6.1.4.1.7483.2.1.1.2.10.8 |
tnSysTiming OBJECT IDENTIFIER .1.3.6.1.4.1.7483.2.1.1.2.11 |
tnSysTimingPrimaryReference.rw Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.11.1 |
tnSysTimingSecondaryReference.rw Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.11.2 |
tnSysTimingLastSwitchTime.ro Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.11.3 |
tnSysTimingControl.rw Enumeration .1.3.6.1.4.1.7483.2.1.1.2.11.4 |
tnSysTimingPrimaryReferenceStatus.ro Enumeration .1.3.6.1.4.1.7483.2.1.1.2.11.5 |
tnSysTimingSecondaryReferenceStatus.ro Enumeration .1.3.6.1.4.1.7483.2.1.1.2.11.6 |
tnSysTimingPrimaryReferenceQuality.ro TropicSysTimingReferenceQuality .1.3.6.1.4.1.7483.2.1.1.2.11.7 |
tnSysTimingSecondaryReferenceQuality.ro TropicSysTimingReferenceQuality .1.3.6.1.4.1.7483.2.1.1.2.11.8 |
tnSysTimingPrimaryReferenceTimingMode.ro TropicSysTimingReferenceTimingMode .1.3.6.1.4.1.7483.2.1.1.2.11.9 |
tnSysTimingSecondaryReferenceTimingMode.ro TropicSysTimingReferenceTimingMode .1.3.6.1.4.1.7483.2.1.1.2.11.10 |
tnSysTimingActiveReference.ro Enumeration .1.3.6.1.4.1.7483.2.1.1.2.11.11 |
tnSysTimingClockingMode.ro Enumeration .1.3.6.1.4.1.7483.2.1.1.2.11.12 |
tnSysTimingSwitchingMode.rw Enumeration .1.3.6.1.4.1.7483.2.1.1.2.11.13 |
tnSysTimingFreeRunSuppressAlarms.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.1.1.2.11.14 |
tnSysTimingDs1FramingMode.rw Enumeration .1.3.6.1.4.1.7483.2.1.1.2.11.15 |
tnSysTimingDs1LineCoding.rw Enumeration .1.3.6.1.4.1.7483.2.1.1.2.11.16 |
tnSysTimingDs1SsmProcessing.rw AluWdmEnabledDisabled (TROPIC-TC) .1.3.6.1.4.1.7483.2.1.1.2.11.17 |
tnSysTimingBitsAClockQuality.rw TropicSysTimingReferenceQuality .1.3.6.1.4.1.7483.2.1.1.2.11.18 |
tnSysTimingBitsBClockQuality.rw TropicSysTimingReferenceQuality .1.3.6.1.4.1.7483.2.1.1.2.11.19 |
tnSysTimingActiveLineTimingCable.ro Enumeration .1.3.6.1.4.1.7483.2.1.1.2.11.20 |
tnSysTimingBitSourceType.rw Enumeration .1.3.6.1.4.1.7483.2.1.1.2.11.21 |
tnSysTimingBitsAModuleType.ro Enumeration .1.3.6.1.4.1.7483.2.1.1.2.11.22 |
tnSysTimingBitsBModuleType.ro Enumeration .1.3.6.1.4.1.7483.2.1.1.2.11.23 |
tnSysFeatures OBJECT IDENTIFIER .1.3.6.1.4.1.7483.2.1.1.2.12 |
tnSysFeatureAutoTopology.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.1.1.2.12.3 |
tnSysFeaturePauseFlowControl.rw Enumeration .1.3.6.1.4.1.7483.2.1.1.2.12.4 |
tnSysFeatureIpUtilitiesRestricted.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.1.1.2.12.5 |
tnSysFeatureFastServiceSetupEnables or disables fast service setup feature.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.1.1.2.12.6 |
tnSysFaultCorrelation OBJECT IDENTIFIER .1.3.6.1.4.1.7483.2.1.1.2.13 |
tnSysFaultCorrelationTransientSuppressionThis attribute always returns a value of disabled. Sets are not supported.rw AluWdmEnabledDisabled (TROPIC-TC) .1.3.6.1.4.1.7483.2.1.1.2.13.1 |
tnSysErrorHandling OBJECT IDENTIFIER .1.3.6.1.4.1.7483.2.1.1.2.14 |
tnSysSetRequestErrorMessageIf this attribute is set to any value and it is the first attribute in a multi-set request varbind list and one of the other attributes in the multi-set request varbind list failed to set, the response PDU will contain an error message. The error message will be the value of attribute tnSysSetRequestErrorMessage in the response PDU. If there are no set failures, the value of tnSysSetRequestErrorMessage in the response PDU will be unchanged. When read, this attribute will return an empty string.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.14.1 |
tnSysSecurity OBJECT IDENTIFIER .1.3.6.1.4.1.7483.2.1.1.2.15 |
tnSysSecurityModeSecurity mode for 1830.rw Enumeration .1.3.6.1.4.1.7483.2.1.1.2.15.1 |
tnSysSsh OBJECT IDENTIFIER .1.3.6.1.4.1.7483.2.1.1.2.15.2 |
tnSysSshKeyTypeThe secure shell key type. Only RSA key generation is supported in the current release. Current configurable value: rsa.rw Enumeration .1.3.6.1.4.1.7483.2.1.1.2.15.2.1 |
tnSysSshKeyModulusThe secure shell modulus. This is used for RSA key generation. Current supported range: 2048 to 4096.rw Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.15.2.2 |
tnSysSshPublicKeyThe secure shell public key.ro OCTET STRING .1.3.6.1.4.1.7483.2.1.1.2.15.2.3 |
tnSysSshKeyCommandSecure key command. Note that the value retrieved from this attribute is always noCmd.rw Enumeration .1.3.6.1.4.1.7483.2.1.1.2.15.2.4 |
tnSysSshKeyGenerationStatusStatus of the secure key generation.ro Enumeration .1.3.6.1.4.1.7483.2.1.1.2.15.2.5 |
tnSysSshEcdsaKeyModulus.rw Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.15.2.6 |
tnSysSsl OBJECT IDENTIFIER .1.3.6.1.4.1.7483.2.1.1.2.15.3 |
tnSysSslKeyTypeThe SSL key type. Only RSA key generation is supported in the current release. Current configurable value: rsa.rw Enumeration .1.3.6.1.4.1.7483.2.1.1.2.15.3.1 |
tnSysSslKeyModulusThe SSL key modulus. Pre-R3.6 range: (512, 4096) R3.6 range: (512, 2048) Post-R11.0 range:(512, 4096) R11.1 range: (2048, 4096).rw Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.15.3.2 |
tnSysSslPublicKeyThe SSL public key.ro OCTET STRING .1.3.6.1.4.1.7483.2.1.1.2.15.3.3 |
tnSysSslKeyCommandSSL key command. Note that the value retrieved from this attribute is always noCmd.rw Enumeration .1.3.6.1.4.1.7483.2.1.1.2.15.3.4 |
tnSysSslKeyGenerationStatusStatus of the SSL key generation.ro AluWdmSslOperationStatus .1.3.6.1.4.1.7483.2.1.1.2.15.3.5 |
tnSysSslCertTransferCommandCommand to upload SSL CSR or download certificate.rw Enumeration .1.3.6.1.4.1.7483.2.1.1.2.15.3.6 |
tnSysSslCertTransferProtocolThe protocol used for SSL CSR and certificate file transfers.rw AluWdmNewTransferProtocol (TROPIC-TC) .1.3.6.1.4.1.7483.2.1.1.2.15.3.8 |
tnSysSslCertTransferRemoteIpThe server IP address for SSL CSR and certificate file transfers.rw IpAddress .1.3.6.1.4.1.7483.2.1.1.2.15.3.9 |
tnSysSslCertTransferRemotePathThe path on server for SSL CSR and certificate file transfers.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.15.3.10 |
tnSysSslCertTransferRemoteUserIdThe userId used for SSL CSR and certificate file transfers.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.7483.2.1.1.2.15.3.11 |
tnSysSslCertTransferRemotePasswordThe password used for SSL CSR and certificate file transfers. When read, this attribute will return an empty string if the password has not been set and '********' if it has been set.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.7483.2.1.1.2.15.3.12 |
tnSysSslCsrCommandCommand to generate SSL certificate signing request (CSR).rw Enumeration .1.3.6.1.4.1.7483.2.1.1.2.15.3.13 |
tnSysSslCsrCountryThe SSL CSR subject country.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.15.3.14 |
tnSysSslCsrStateThe SSL CSR subject state.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.15.3.15 |
tnSysSslCsrLocalityThe SSL CSR subject locality.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.15.3.16 |
tnSysSslCsrOrganizationThe SSL CSR subject organization.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.15.3.17 |
tnSysSslCsrOrganizationUnitThe SSL CSR subject organization unit.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.15.3.18 |
tnSysSslCsrCommonNameThe SSL CSR subject common name.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.15.3.19 |
tnSysSslCsrEmailAddressThe SSL CSR subject email address.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.7483.2.1.1.2.15.3.20 |
tnSysSslCertCommandCommand to install SSL certificate.rw Enumeration .1.3.6.1.4.1.7483.2.1.1.2.15.3.21 |
tnSysSslCertSignatureAlgorithmThe SSL certificate signature algorithm.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.7483.2.1.1.2.15.3.22 |
tnSysSslCertValidityThe SSL certificate validity.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.7483.2.1.1.2.15.3.23 |
tnSysSslCsrUploadStatusStatus of the SSL CSR file transfer.ro AluWdmSslOperationStatus .1.3.6.1.4.1.7483.2.1.1.2.15.3.24 |
tnSysSslCertDownloadStatusStatus of the SSL certificate file transfer.ro AluWdmSslOperationStatus .1.3.6.1.4.1.7483.2.1.1.2.15.3.25 |
tnSysSslCertInstallStatusStatus of the SSL certificate install.ro AluWdmSslOperationStatus .1.3.6.1.4.1.7483.2.1.1.2.15.3.26 |
tnSysSslCsrGenerationStatusStatus of the SSL CSR Generation.ro Enumeration .1.3.6.1.4.1.7483.2.1.1.2.15.3.27 |
tnSysSslCertTransferInetAddressTypeThe value specifies the type of Internet address stored in SSL CSRrw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.7483.2.1.1.2.15.3.28 |
tnSysSslCertTransferInetAddressIndicates the IPv6 address of SSL CSR and certificate file transfers.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.7483.2.1.1.2.15.3.29 |
tnSysSslCertTransferPort.rw Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.15.3.30 |
tnSysSslCertVerificationSpecifies that the X.509v3 certificate will be verified before installation. This means verification of validaity, chain of trust (issuer of certificate), basicConstraints, (extended) key purpose, revocation status.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.1.1.2.15.3.31 |
tnSysSslCertExpiration.rw Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.15.3.32 |
tnSysKey OBJECT IDENTIFIER .1.3.6.1.4.1.7483.2.1.1.2.15.4 |
tnSshKeyAttributeTotalTotal no of attributes in tnSshKeyTable.ro Integer32 .1.3.6.1.4.1.7483.2.1.1.2.15.4.1 |
tnSshKeyTable. SEQUENCE OF TnSshKeyEntry .1.3.6.1.4.1.7483.2.1.1.2.15.4.2 |
tnSshKeyEntry. TnSshKeyEntry .1.3.6.1.4.1.7483.2.1.1.2.15.4.2.1 |
tnSshKeyTypeIndexThe secure shell key type. Enumeration .1.3.6.1.4.1.7483.2.1.1.2.15.4.2.1.1 |
tnSshPublicKeyThe secure shell public key.ro OCTET STRING .1.3.6.1.4.1.7483.2.1.1.2.15.4.2.1.2 |
tnSshPublicKey1The secure shell public key1.ro OCTET STRING .1.3.6.1.4.1.7483.2.1.1.2.15.4.2.1.3 |
tnSshEcdsaPublicKeyThe secure Ecdsa public key.ro OCTET STRING .1.3.6.1.4.1.7483.2.1.1.2.15.4.2.1.4 |
tnSshEcdsaPublicKey1The secure Ecdsa public key1.ro OCTET STRING .1.3.6.1.4.1.7483.2.1.1.2.15.4.2.1.5 |
tnSshEd25519PublicKeyThe secure Ed25519 public key.ro OCTET STRING .1.3.6.1.4.1.7483.2.1.1.2.15.4.2.1.6 |
tnSshEd25519PublicKey1The secure Ed25519 public key1.ro OCTET STRING .1.3.6.1.4.1.7483.2.1.1.2.15.4.2.1.7 |
tnSysTransferLog OBJECT IDENTIFIER .1.3.6.1.4.1.7483.2.1.1.2.16 |
tnSysTransferLogCommand.rw Enumeration .1.3.6.1.4.1.7483.2.1.1.2.16.1 |
tnSysTransferLogRemoteHostIp.rw IpAddress .1.3.6.1.4.1.7483.2.1.1.2.16.2 |
tnSysTransferLogRemotePath.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.16.3 |
tnSysTransferLogTypeThis attribute indicates the log type to be transferred to remote file server.rw Enumeration .1.3.6.1.4.1.7483.2.1.1.2.16.4 |
tnSysTransferLogStatusThis attribute indicates the status of the previously executed tnSysTransferLogCommand operation.ro AluWdmTransferStatus .1.3.6.1.4.1.7483.2.1.1.2.16.5 |
tnSysTransferLogLastLogFilenameThis attribute indicates the filename for the last transfer performed on the node. If none exists or a transfer is in progress, this attribute will return an empty string.ro SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.16.6 |
tnSysTransferLogLastCommandThis is the last transfer log command executed. If the last operation is unknown, the value of this attribute will be unknown. If a transfer log command has not been executed since the last node reset, the value of this attribute will be noCommand.ro Enumeration .1.3.6.1.4.1.7483.2.1.1.2.16.7 |
tnSysTransferLogLastFileTimeStampThe date and time when the last file was completed.ro Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.16.8 |
tnSysTransferLogProtocolThis attributes indicates the transfer log protocol.rw AluWdmNewTransferProtocol (TROPIC-TC) .1.3.6.1.4.1.7483.2.1.1.2.16.9 |
tnSysTransferLogUserIdThe userId used to access the RFS.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.16.10 |
tnSysTransferLogPasswordThe password used to access the RFS. When read, this attribute will return an empty string if the password has not been set and '********' if it has been set.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.16.11 |
tnSysTransferLogWindowStartThe start time of partial log time window, measured in total time ticks (seconds) from the year 1970.rw Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.16.12 |
tnSysTransferLogWindowStopThe stop time of partial log time window, measured in total time ticks (seconds) from the year 1970.rw Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.16.13 |
tnSysTransferLogRemoteHostInetAddressTypeThe value specifies the type of Internet address stored in tnSysTransferLogRemoteHostInetAddress.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.7483.2.1.1.2.16.14 |
tnSysTransferLogRemoteHostInetAddressIndicates the IPv6 address of the log server.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.7483.2.1.1.2.16.15 |
tnSysTransferLogPortThis attributes indicates the transfer log port.rw Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.16.16 |
tnSysAccessControlList OBJECT IDENTIFIER .1.3.6.1.4.1.7483.2.1.1.2.17 |
tnSysIpAclSysDefault OBJECT IDENTIFIER .1.3.6.1.4.1.7483.2.1.1.2.17.1 |
tnSysIpAclRxActionDefault action to be taken on received (incoming) packets where ACL is enabled but no pattern matches or no action is explicitly defined.rw Enumeration .1.3.6.1.4.1.7483.2.1.1.2.17.1.1 |
tnSysIpAclTxActionDefault action to be taken on transmitted (outgoing) packets where ACL is enabled but no pattern matches or no action is explicitly defined.rw Enumeration .1.3.6.1.4.1.7483.2.1.1.2.17.1.2 |
tnSysIpAclSnmpCfgEnableIndicates whether or not ACL configuration is supported via SNMP.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.1.1.2.17.1.3 |
tnSysIpAclCfgRestoreToDefaultIf setting to true, it will restore acl_ipv4 config to system default.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.1.1.2.17.1.4 |
tnSysIpAclClearCounterClear IPACL counter to zero.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.1.1.2.17.1.5 |
tnSysIpAclPatternAttributeTotal.ro Integer32 .1.3.6.1.4.1.7483.2.1.1.2.17.2 |
tnSysIpAclPatternTableTable of IP ACL pattern. An ACL pattern is a set of packet field descriptors that can be tested against a packet. For a pattern to match, each of its field descriptors must fit the data in the packet. SEQUENCE OF TnSysIpAclPatternEntry .1.3.6.1.4.1.7483.2.1.1.2.17.3 |
tnSysIpAclPatternEntry. TnSysIpAclPatternEntry .1.3.6.1.4.1.7483.2.1.1.2.17.3.1 |
tnSysIpAclPatternIDThe identifier of the ACL pattern to be created. It could be either an integer in the range of (1-4000) or a string of up to 30 case-sensitive alphanumeric characters, where the first character is always a letter, which is selected by the user to uniquely identify the pattern in subsequent provisioning requests. SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.17.3.1.1 |
tnSysIpAclPatternActionAction to be taken on packets matching the specified ACL pattern. Valid values are: pass - allow the packet if it matches all the pattern descriptors; block - disallow the packet if it doesn't match all the pattern descriptors. log - log the packet if it matches all the pattern descriptors.rw Enumeration .1.3.6.1.4.1.7483.2.1.1.2.17.3.1.2 |
tnSysIpAclPatternICMPERRORICMP error reporting behavior for blocked packets. If no icmpError value is specified, the behavior will be determined by the system default setting. Valid values are: true - send ICMP error for blocked packets false - do not send ICMP error for blocked packets.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.1.1.2.17.3.1.3 |
tnSysIpAclPatternSrcAddrSource IP address. It can be specified explicitly to match only packets that originate from a particular address or can be used along with the SrcPrefix parameter to specify a range of supported originating IP addresses.rw IpAddress .1.3.6.1.4.1.7483.2.1.1.2.17.3.1.4 |
tnSysIpAclPatternSrcPrefixSource IP mask prefix. It's the reverse of a subnet mask, where 0 indicates a position that must be matched and 1 indicates a position that does not matter. If the SrcAddr is specified and the SrcPrefix is unspecified (0.0.0.0), the originating IP address of the packet must match the SrcAddr exactly. Otherwise, the pattern will allow packets whose originating IP is within the range implied by the source IP and subnet mask. This parameter is not valid unless the SrcAddr is also specified.rw IpAddress .1.3.6.1.4.1.7483.2.1.1.2.17.3.1.5 |
tnSysIpAclPatternDestAddrDestination IP address. It can be specified explicitly to match only packets that originate from a particular address or can be used along with the DestPrefix parameter to specify a range of supported destination IP addresses.rw IpAddress .1.3.6.1.4.1.7483.2.1.1.2.17.3.1.6 |
tnSysIpAclPatternDestPrefixDestination IP Mask Prefix. It's the reverse of a subnet mask, where 0 indicates a position that must be matched and 1 indicates a position that does not matter. If the DestAddr is specified and the DestPrefix is unspecified (0.0.0.0), the originating IP address of the packet must match the DestAddr exactly. Otherwise, the pattern will allow packets whose originating IP is within the range implied by the source IP and subnet mask. This parameter is not valid unless the DestAddr is also specified.rw IpAddress .1.3.6.1.4.1.7483.2.1.1.2.17.3.1.7 |
tnSysIpAclPatternDestPortTCP/UDP destination port.When rangeEnd not zero, it is used as range start. It is applicable only when the IP Protocol is TCP or UDP. Some of the commonly used ports are: 20 FTP-Data TCP File Transfer Protocol [Data] 21 FTP TCP File Transfer Protocol [Control] 23 Telnet TCP Telnet 69 TFTP UDP Trivial File Transfer Protocol 123 NTP UDP Network Time Protocol 161 SNMP UDP SNMP 162 SNMPTRAP UDP SNMPTRAP 3082 TL1-Raw TCP TL-1 [Raw] 3083 TL1-Telnet TCP TL-1 [User Interface]rw Integer32 .1.3.6.1.4.1.7483.2.1.1.2.17.3.1.8 |
tnSysIpAclPatternIpProtocolIP Protocol. It can be specified by explicit protocol number (Integer, 0 to 255) or by keyword. Some common protocol types are listed below: ICMP - IP protocol is ICMP (1) IPIP - IP protocol is IPIP (4) TCP - IP protocol is TCP (6) UDP - IP protocol is UDP (17) RSVP - IP protocol is RSVP (46) GRE - IP protocol is GRE (47) OSPF - IP protocol is OSPF (89) <other protocol> - Specify IP protocol number: 0 to 255rw OCTET STRING .1.3.6.1.4.1.7483.2.1.1.2.17.3.1.9 |
tnSysIpAclPatternIpFragmentIP Fragmentation. True means that the filtering is done on all fragments, not just on the initial one (assuming the following ones are ok). Valid values are: true - pattern is an IP false - pattern is not an IP fragment.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.1.1.2.17.3.1.10 |
tnSysIpAclPatternIcmpTypeICMP Type identifier. It is applicable only when IPPROTOCOL is ICMP. If specified, the pattern will match only packets with this exact ICMP type. Some of the most commonly used ICMP types are: 0 Echo Reply [RFC792] 3 Destination Unreachable[RFC792] 5 Redirect[RFC792] 9 Router Advertisement[RFC1256] 42-255 Reserved.rw Integer32 .1.3.6.1.4.1.7483.2.1.1.2.17.3.1.11 |
tnSysIpAclPatternIcmpCodeICMP code field. It is applicable only when IP protocol is ICMP and is used along with certain ICMP types to further specify the message type. It must also specify the ICMP type when setting this parameter. If specified, the pattern will only match packets with this exact ICMP code value. For example, there are a few ICMPCODEs associated with the ICMPTYPE Redirect [RFC792]: 0 Redirect Datagram for the Network (or subnet) 1 Redirect Datagram for the Host 2 Redirect Datagram for the Type of Service and Network 3 Redirect Datagram for the Type of Service and Host.rw Integer32 .1.3.6.1.4.1.7483.2.1.1.2.17.3.1.12 |
tnSysIpAclPatternTcpEstablishTCP established flag. It matches a packet depending on whether the TCP flags in the IP header correspond to the established state. It is applicable only when IP Protocol is TCP. Valid values are: true - TCP flags correspond to established state false - TCP flags do not correspond to established state local - TCP flags correspond to established state only for destination to local NE.rw Enumeration .1.3.6.1.4.1.7483.2.1.1.2.17.3.1.13 |
tnSysIpAclPatternRowStatusThe status of pattern. Set to 4 (createAndGo) to add pattern. Set to 6 (destroy) to remove the pattern.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.7483.2.1.1.2.17.3.1.14 |
tnSysIpAclPatternSrcPortTCP/UDP source port. When rangeEnd not zero, it is used as range start. It is applicable only when the IP Protocol is TCP or UDP. Some of the commonly used ports are: 20 FTP-Data TCP File Transfer Protocol [Data] 21 FTP TCP File Transfer Protocol [Control] 23 Telnet TCP Telnet 69 TFTP UDP Trivial File Transfer Protocol 123 NTP UDP Network Time Protocol 161 SNMP UDP SNMP 162 SNMPTRAP UDP SNMPTRAP 3082 TL1-Raw TCP TL-1 [Raw] 3083 TL1-Telnet TCP TL-1 [User Interface]rw Integer32 .1.3.6.1.4.1.7483.2.1.1.2.17.3.1.15 |
tnSysIpAclPatternSystemDefaultIndicates if ACL pattern is added by the system or a user. Valid values are: true - ACL pattern is added by the system. false - ACL pattern is added by the user.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.1.1.2.17.3.1.16 |
tnSysIpAclPatternSrcPortRangeEndTCP/UDP source port range end.rw Integer32 .1.3.6.1.4.1.7483.2.1.1.2.17.3.1.17 |
tnSysIpAclPatternDestPortRangeEndTCP/UDP destination port range end.rw Integer32 .1.3.6.1.4.1.7483.2.1.1.2.17.3.1.18 |
tnSysIpAclFilterAttributeTotal.ro Integer32 .1.3.6.1.4.1.7483.2.1.1.2.17.4 |
tnSysIpAclFilterTableAn ACL filter is an ordered list of patterns. A filter consists of a sorted list of (index, pattern) pairs, where the index indicates the relative position on the list and the pattern indicates the pattern identifier. Up to 100 filters may be defined on the system, and each filter may contain up to 256 (index, pattern) pairs. SEQUENCE OF TnSysIpAclFilterEntry .1.3.6.1.4.1.7483.2.1.1.2.17.5 |
tnSysIpAclFilterEntry. TnSysIpAclFilterEntry .1.3.6.1.4.1.7483.2.1.1.2.17.5.1 |
tnSysIpAclFilterIDIdentifier for the ACL filter being defined. It could be either an integer in the range of (100-199) or a string of up to 30 case-sensitive alphanumeric characters, where the first character is always a letter, which uniquely identifies the filter being defined. SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.17.5.1.1 |
tnSysIpAclFilterPatternIndexThe values of 1 to 256 represent the insertion point for the specified pattern on the filter list. If there is already a pattern defined at the specified index, the new pattern entry will replace the previous one. The value of 0 represents user input filterID without giving the pattern index. Front end users will use 0 for setting. Integer32 .1.3.6.1.4.1.7483.2.1.1.2.17.5.1.2 |
tnSysIpAclFilterPatternIDThe identifier of the ACL pattern being added to or removed from the specified filter. It could be either an integer in the range of (1-4000) or a string of up to 30 case-sensitive alphanumeric characters, where the first character is always a letter, which is selected by the user to uniquely identify the pattern in subsequent provisioning requests.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.17.5.1.3 |
tnSysIpAclFilterStatCountPacket match counter. It is incremented whenever a packet matches the specified ACL pattern in the filter. This counter will be incremented regardless of the provisioned action on that pattern.ro Counter32 .1.3.6.1.4.1.7483.2.1.1.2.17.5.1.4 |
tnSysIpAclFilterRowStatusAction to take on the specified filter. The operator could add or remove a pattern from a specified filter. Set to 4 (createAndGo) to add pattern in the filter. Set to 6 (destroy) to remove the pattern in the filter.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.7483.2.1.1.2.17.5.1.5 |
tnSysIpAclFilterSystemDefaultIndicates if ACL filter is added by the system or a user. Valid values are: true - ACL filter is added by the system. false - ACL filter is added by a user.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.1.1.2.17.5.1.6 |
tnSysIpAclInterfaceAttributeTotal.ro Integer32 .1.3.6.1.4.1.7483.2.1.1.2.17.6 |
tnSysIpAclInterfaceTableThe IP ACL interface table is used to associate or disassociate filters with particular physical network interfaces (but not logical sub-interfaces). Two filters may be associated with each interface, one receive and one transmit. The receive and transmit filters on an interface may be independently enabled and disabled on that interface without disassociating the specific filter numbers. SEQUENCE OF TnSysIpAclInterfaceEntry .1.3.6.1.4.1.7483.2.1.1.2.17.7 |
tnSysIpAclInterfaceEntry. TnSysIpAclInterfaceEntry .1.3.6.1.4.1.7483.2.1.1.2.17.7.1 |
tnSysIpAclInterfaceFilterDirDirection on the specified network interface to which the IP ACL filter will be associated. Enumeration .1.3.6.1.4.1.7483.2.1.1.2.17.7.1.1 |
tnSysIpAclInterfaceFilterIDIdentifier for the ACL filter being associated with the specified interface and direction. It could be either an integer in the range of (100-199) or a string of up to 30 case-sensitive alphanumeric characters, where the first character is always a letter, representing an existing ACL Filter.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.17.7.1.2 |
tnSysIpAclInterfaceFilterEnableEnable or disable the IP ACL filter associated with the specified interface and direction.rw Enumeration .1.3.6.1.4.1.7483.2.1.1.2.17.7.1.3 |
tnSysIpAclInterfaceFilterRowStatusThe status of Interface Filter. Set to 4 (createAndGo) to add filter in the interface. Set to 6 (destroy) to remove the filter in the interface.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.7483.2.1.1.2.17.7.1.4 |
tnSysIpAclInterfaceSystemDefaultIndicates if ACL interface added by the system or a user. Valid values are: true - ACL interface is added by the system. false - ACL interface is added by a user.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.1.1.2.17.7.1.5 |
tnSysIpAclInterfaceFilterLogEnable or disable the IP ACL filter logging on specified interface and direction.rw Enumeration .1.3.6.1.4.1.7483.2.1.1.2.17.7.1.6 |
tnSysIpAclNetIfFilterAttributeTotal.ro Integer32 .1.3.6.1.4.1.7483.2.1.1.2.17.8 |
tnSysIpAclNetIfFilterTableThe IP ACL NetIf table is used to associate or disassociate filters with particular NetIf. Two filters may be associated with each NetIf, one receive and one transmit. The receive and transmit filters on an NetIf may be independently enabled and disabled on that NetIf without disassociating the specific filter numbers. SEQUENCE OF TnSysIpAclNetIfFilterEntry .1.3.6.1.4.1.7483.2.1.1.2.17.9 |
tnSysIpAclNetIfFilterEntry. TnSysIpAclNetIfFilterEntry .1.3.6.1.4.1.7483.2.1.1.2.17.9.1 |
tnSysIpAclNetIfFilterDirDirection on the specified NetIf to which the IP ACL filter will be associated. Enumeration .1.3.6.1.4.1.7483.2.1.1.2.17.9.1.1 |
tnSysIpAclNetIfFilterRowStatusThe status of NetIf Filter. Set to 4 (createAndGo) to add filter in the interface. Set to 6 (destroy) to remove the filter in the interface.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.7483.2.1.1.2.17.9.1.2 |
tnSysIpAclNetIfFilterIDIdentifier for the ACL filter being associated with the specified NetIf and direction. It could be either an integer in the range of (100-199) or a string of up to 30 case-sensitive alphanumeric characters, where the first character is always a letter, representing an existing ACL Filter.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.17.9.1.3 |
tnSysIpAclNetIfFilterEnableEnable or disable the IP ACL filter associated with the specified NetIf and direction.rw Enumeration .1.3.6.1.4.1.7483.2.1.1.2.17.9.1.4 |
tnSysIpAclNetIfFilterSystemDefaultIndicates if ACL NetIf is added by the system or a user. Valid values are: true - ACL interface is added by the system. false - ACL interface is added by a user.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.1.1.2.17.9.1.5 |
tnSysIpAclIpv6PatternAttributeTotal.ro Integer32 .1.3.6.1.4.1.7483.2.1.1.2.17.10 |
tnSysIpAclIpv6PatternTableTable of IPV6 ACL pattern. An ACL pattern is a set of packet field descriptors that can be tested against a packet. For a pattern to match, each of its field descriptors must fit the data in the packet. SEQUENCE OF TnSysIpAclIpv6PatternEntry .1.3.6.1.4.1.7483.2.1.1.2.17.11 |
tnSysIpAclIpv6PatternEntry. TnSysIpAclIpv6PatternEntry .1.3.6.1.4.1.7483.2.1.1.2.17.11.1 |
tnSysIpAclIpv6PatternIDThe identifier of theIpv6 ACL pattern to be created. It could be either an integer in the range of (1-4000) or a string of up to 30 case-sensitive alphanumeric characters, where the first character is always a letter, which is selected by the user to uniquely identify the pattern in subsequent provisioning requests. SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.17.11.1.1 |
tnSysIpAclIpv6PatternActionAction to be taken on packets matching the specified Ipv6ACL pattern. Valid values are: pass - allow the packet if it matches all the pattern descriptors; block - disallow the packet if it doesn't match all the pattern descriptors. log - log the packet if it matches all the pattern descriptors.rw Enumeration .1.3.6.1.4.1.7483.2.1.1.2.17.11.1.2 |
tnSysIpAclIpv6PatternICMPV6ERRORICMPV6 error reporting behavior for blocked packets. If no icmpV6Error value is specified, the behavior will be determined by the system default setting. Valid values are: true - send ICMPV6 error for blocked packets false - do not send ICMPV6 error for blocked packets.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.1.1.2.17.11.1.3 |
tnSysIpAclIpv6PatternSrcAddrSource IPV6 address. It can be specified explicitly to match only packets that originate from a particular address or can be used along with the SrcPrefixLen parameter to specify a range of supported originating IPV6 addresses.rw InetAddressIPv6 (INET-ADDRESS-MIB) .1.3.6.1.4.1.7483.2.1.1.2.17.11.1.4 |
tnSysIpAclIpv6PatternSrcPrefixLenDenotes the length of source IPV6 address prefix. A value of n corresponds to an IP address maskthat has n contiguous1-bits from the most significant bit (MSB), with all other bits set to 0rw InetAddressPrefixLength (INET-ADDRESS-MIB) .1.3.6.1.4.1.7483.2.1.1.2.17.11.1.5 |
tnSysIpAclIpv6PatternDestAddrDestination IPV6 address. It can be specified explicitly to match only packets that originate from a particular address or can be used along with the DestPrefixLen parameter to specify a range of supported destination IPV6 addresses.rw InetAddressIPv6 (INET-ADDRESS-MIB) .1.3.6.1.4.1.7483.2.1.1.2.17.11.1.6 |
tnSysIpAclIpv6PatternDestPrefixLenDenotes the length of destination IPV6 address prefix. A value of n corresponds to an IP address maskthat has n contiguous1-bits from the most significant bit (MSB), with all other bits set to 0rw InetAddressPrefixLength (INET-ADDRESS-MIB) .1.3.6.1.4.1.7483.2.1.1.2.17.11.1.7 |
tnSysIpAclIpv6PatternIpProtocolIP Protocol. It can be specified by explicit protocol number (Integer, 0 to 255) or by keyword. Some common protocol types are listed below: ICMPv6 - IP protocol is ICMPv6 (58) IPIP - IP protocol is IPIP (41) TCP - IP protocol is TCP (6) UDP - IP protocol is UDP (17) RSVP - IP protocol is RSVP (46) GRE - IP protocol is GRE (47) OSPFv3 - IP protocol is OSPFv3 (89) <other protocol> - Specify IP protocol number: 0 to 255rw OCTET STRING .1.3.6.1.4.1.7483.2.1.1.2.17.11.1.8 |
tnSysIpAclIpv6PatternIcmpTypeICMPV6 Type identifier. If specified, the pattern will match only packets with this exact ICMPV6 type. Some of the most commonly used ICMP types are: 1 Destination Unreachable [RFC2463] 2 Packet Too Big 3 Time Exceeded 4 Parameter Problem 128 Echo Request(IPv6 pingcommand) 129 Echo Reply 133-137 Neighbor Discovery.rw Integer32 .1.3.6.1.4.1.7483.2.1.1.2.17.11.1.9 |
tnSysIpAclIpv6PatternIcmpCodeICMPV6code field. It is used along with certain ICMPV6 types to further specify the message type. For example, some of the codes used with ICMPv6 Type 1 (Destination Unreachable) are 0 no route to destination 1 communication with destination administratively prohibited 2 beyond scope of source address 3 address unreachable 4 port unreachable 5 source address failed ingress/egress policy 6 reject route to destination 7 Error in Source Routing Header If specified, the pattern will only match packets with this exact ICMPV6 codevalue. [RFC2463]rw Integer32 .1.3.6.1.4.1.7483.2.1.1.2.17.11.1.10 |
tnSysIpAclIpv6PatternSrcPortTCP/UDP source port. When rangeEnd not zero, it is used as range start.rw Integer32 .1.3.6.1.4.1.7483.2.1.1.2.17.11.1.11 |
tnSysIpAclIpv6PatternDestPortTCP/UDP destination port. When rangeEnd not zero, it is used as range start.rw Integer32 .1.3.6.1.4.1.7483.2.1.1.2.17.11.1.12 |
tnSysIpAclIpv6PatternIpFragmentIP Fragmentation. True means that the filtering is done on all fragments, not just on the initial one (assuming the following ones are ok). Valid values are: true - pattern is an IP false - pattern is not an IP fragment.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.1.1.2.17.11.1.13 |
tnSysIpAclIpv6PatternTcpEstablishTCP established flag. It matches a packet depending on whether the TCP flags in the IP header correspond to the established state. Valid values are: true - TCP flags correspond to established state false - TCP flags do not correspond to established local - TCP flags correspond to established state only for destination to local NE.rw Enumeration .1.3.6.1.4.1.7483.2.1.1.2.17.11.1.14 |
tnSysIpAclIpv6PatternSystemDefaultIndicates if ACLIPV6 pattern is added by the system or a user. Valid values are: true - ACL pattern is added by the system. false - ACL pattern is added by the user.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.1.1.2.17.11.1.15 |
tnSysIpAclIpv6PatternRowStatusThe status of pattern. Set to 4 (createAndGo) to add pattern. Set to 6 (destroy) to remove the pattern.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.7483.2.1.1.2.17.11.1.16 |
tnSysIpAclIpv6PatternSrcPortRangeEndTCP/UDP source port range end.rw Integer32 .1.3.6.1.4.1.7483.2.1.1.2.17.11.1.17 |
tnSysIpAclIpv6PatternDestPortRangeEndTCP/UDP destination port range end.rw Integer32 .1.3.6.1.4.1.7483.2.1.1.2.17.11.1.18 |
tnSysIpAclIpv6FilterAttributeTotal.ro Integer32 .1.3.6.1.4.1.7483.2.1.1.2.17.12 |
tnSysIpAclIpv6FilterTableAn ACL filter is an ordered list of patterns. A filter consists of a sorted list of (index, pattern) pairs, where the index indicates the relative position on the list and the pattern indicates the pattern identifier. Up to 100 filters may be defined on the system, and each filter may contain up to 256 (index, pattern) pairs. SEQUENCE OF TnSysIpAclIpv6FilterEntry .1.3.6.1.4.1.7483.2.1.1.2.17.13 |
tnSysIpAclIpv6FilterEntry. TnSysIpAclIpv6FilterEntry .1.3.6.1.4.1.7483.2.1.1.2.17.13.1 |
tnSysIpAclIpv6FilterIDIdentifier for the ACL filter being defined. It could be either an integer in the range of (100-199) or a string of up to 30 case-sensitive alphanumeric characters, where the first character is always a letter, which uniquely identifies the filter being defined. SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.17.13.1.1 |
tnSysIpAclIpv6FilterPatternIndexThe values of 1 to 256 represent the insertion point for the specified pattern on the filter list. If there is already a pattern defined at the specified index, the new pattern entry will replace the previous one. The value of 0 represents user input filterID without giving the pattern index. Front end users will use 0 for setting. Integer32 .1.3.6.1.4.1.7483.2.1.1.2.17.13.1.2 |
tnSysIpAclIpv6FilterPatternIDThe identifier of the ACL pattern being added to or removed from the specified filter. It could be either an integer in the range of (1-4000) or a string of up to 30 case-sensitive alphanumeric characters, where the first character is always a letter, which is selected by the user to uniquely identify the pattern in subsequent provisioning requests.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.17.13.1.3 |
tnSysIpAclIpv6FilterStatCountPacket match counter. It is incremented whenever a packet matches the specified ACL pattern in the filter. This counter will be incremented regardless of the provisioned action on that pattern.ro Counter32 .1.3.6.1.4.1.7483.2.1.1.2.17.13.1.4 |
tnSysIpAclIpv6FilterRowStatusAction to take on the specified filter. The operator could add or remove a pattern from a specified filter. Set to 4 (createAndGo) to add pattern in the filter. Set to 6 (destroy) to remove the pattern in the filter.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.7483.2.1.1.2.17.13.1.5 |
tnSysIpAclIpv6FilterSystemDefaultIndicates if ACL filter is added by the system or a user. Valid values are: true - ACL filter is added by the system. false - ACL filter is added by a user.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.1.1.2.17.13.1.6 |
tnSysIpAclIpv6InterfaceAttributeTotal.ro Integer32 .1.3.6.1.4.1.7483.2.1.1.2.17.14 |
tnSysIpAclIpv6InterfaceTableThe IP ACL interface table is used to associate or disassociate filters with particular physical network interfaces (but not logical sub-interfaces). Two filters may be associated with each interface, one receive and one transmit. The receive and transmit filters on an interface may be independently enabled and disabled on that interface without disassociating the specific filter numbers. SEQUENCE OF TnSysIpAclIpv6InterfaceEntry .1.3.6.1.4.1.7483.2.1.1.2.17.15 |
tnSysIpAclIpv6InterfaceEntry. TnSysIpAclIpv6InterfaceEntry .1.3.6.1.4.1.7483.2.1.1.2.17.15.1 |
tnSysIpAclIpv6InterfaceFilterDirDirection on the specified network interface to which the IP ACL filter will be associated. Enumeration .1.3.6.1.4.1.7483.2.1.1.2.17.15.1.1 |
tnSysIpAclIpv6InterfaceFilterIDIdentifier for the ACL filter being associated with the specified interface and direction. It could be either an integer in the range of (100-199) or a string of up to 30 case-sensitive alphanumeric characters, where the first character is always a letter, representing an existing ACL Filter.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.17.15.1.2 |
tnSysIpAclIpv6InterfaceFilterEnableEnable or disable the IP ACL filter associated with the specified interface and direction.rw Enumeration .1.3.6.1.4.1.7483.2.1.1.2.17.15.1.3 |
tnSysIpAclIpv6InterfaceFilterRowStatusThe status of Interface Filter. Set to 4 (createAndGo) to add filter in the interface. Set to 6 (destroy) to remove the filter in the interface.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.7483.2.1.1.2.17.15.1.4 |
tnSysIpAclIpv6InterfaceSystemDefaultIndicates if ACL interface added by the system or a user. Valid values are: true - ACL interface is added by the system. false - ACL interface is added by a user.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.1.1.2.17.15.1.5 |
tnSysIpAclIpv6InterfaceFilterLogEnable or disable the IPV6 ACL filter logging on specified interface and direction.rw Enumeration .1.3.6.1.4.1.7483.2.1.1.2.17.15.1.6 |
tnSysIpv6AclNetIfFilterAttributeTotal.ro Integer32 .1.3.6.1.4.1.7483.2.1.1.2.17.16 |
tnSysIpv6AclNetIfFilterTableThe IP ACL NetIf table is used to associate or disassociate filters with particular NetIf. Two filters may be associated with each NetIf, one receive and one transmit. The receive and transmit filters on an NetIf may be independently enabled and disabled on that NetIf without disassociating the specific filter numbers. SEQUENCE OF TnSysIpv6AclNetIfFilterEntry .1.3.6.1.4.1.7483.2.1.1.2.17.17 |
tnSysIpv6AclNetIfFilterEntry. TnSysIpv6AclNetIfFilterEntry .1.3.6.1.4.1.7483.2.1.1.2.17.17.1 |
tnSysIpv6AclNetIfFilterDirDirection on the specified NetIf to which the IP ACL filter will be associated. Enumeration .1.3.6.1.4.1.7483.2.1.1.2.17.17.1.1 |
tnSysIpv6AclNetIfFilterRowStatusThe status of NetIf Filter. Set to 4 (createAndGo) to add filter in the interface. Set to 6 (destroy) to remove the filter in the interface.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.7483.2.1.1.2.17.17.1.2 |
tnSysIpv6AclNetIfFilterIDIdentifier for the ACL filter being associated with the specified NetIf and direction. It could be either an integer in the range of (100-199) or a string of up to 30 case-sensitive alphanumeric characters, where the first character is always a letter, representing an existing ACL Filter.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.17.17.1.3 |
tnSysIpv6AclNetIfFilterEnableEnable or disable the IP ACL filter associated with the specified NetIf and direction.rw Enumeration .1.3.6.1.4.1.7483.2.1.1.2.17.17.1.4 |
tnSysIpv6AclNetIfFilterSystemDefaultIndicates if ACL NetIf is added by the system or a user. Valid values are: true - ACL interface is added by the system. false - ACL interface is added by a user.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.1.1.2.17.17.1.5 |
tnSysIpAclEthIfFilterAttributeTotal.ro Integer32 .1.3.6.1.4.1.7483.2.1.1.2.17.18 |
tnSysIpAclEthIfFilterTableThe IP ACL EthIf table is used to associate or disassociate filters with particular EthIf. Two filters may be associated with each EthIf, one receive and one transmit. The receive and transmit filters on an EthIf may be independently enabled and disabled on that EthIf without disassociating the specific filter numbers. SEQUENCE OF TnSysIpAclEthIfFilterEntry .1.3.6.1.4.1.7483.2.1.1.2.17.19 |
tnSysIpAclEthIfFilterEntry. TnSysIpAclEthIfFilterEntry .1.3.6.1.4.1.7483.2.1.1.2.17.19.1 |
tnSysIpAclEthIfFilterDirDirection on the specified EthIf to which the IP ACL filter will be associated. Enumeration .1.3.6.1.4.1.7483.2.1.1.2.17.19.1.1 |
tnSysIpAclEthIfFilterRowStatusThe status of EthIf Filter. Set to 4 (createAndGo) to add filter in the interface. Set to 6 (destroy) to remove the filter in the interface.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.7483.2.1.1.2.17.19.1.2 |
tnSysIpAclEthIfFilterIDIdentifier for the ACL filter being associated with the specified EthIf and direction. It could be either an integer in the range of (100-199) or a string of up to 30 case-sensitive alphanumeric characters, where the first character is always a letter, representing an existing ACL Filter.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.17.19.1.3 |
tnSysIpAclEthIfFilterEnableEnable or disable the IP ACL filter associated with the specified EthIf and direction.rw Enumeration .1.3.6.1.4.1.7483.2.1.1.2.17.19.1.4 |
tnSysIpAclEthIfFilterSystemDefaultIndicates if ACL EthIf is added by the system or a user. Valid values are: true - ACL interface is added by the system. false - ACL interface is added by a user.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.1.1.2.17.19.1.5 |
tnSysIpv6AclEthIfFilterAttributeTotal.ro Integer32 .1.3.6.1.4.1.7483.2.1.1.2.17.20 |
tnSysIpv6AclEthIfFilterTableThe IPV6 ACL EthIf table is used to associate or disassociate filters with particular EthIf. Two filters may be associated with each EthIf, one receive and one transmit. The receive and transmit filters on an EthIf may be independently enabled and disabled on that EthIf without disassociating the specific filter numbers. SEQUENCE OF TnSysIpv6AclEthIfFilterEntry .1.3.6.1.4.1.7483.2.1.1.2.17.21 |
tnSysIpv6AclEthIfFilterEntry. TnSysIpv6AclEthIfFilterEntry .1.3.6.1.4.1.7483.2.1.1.2.17.21.1 |
tnSysIpv6AclEthIfFilterDirDirection on the specified EthIf to which the IP ACL filter will be associated. Enumeration .1.3.6.1.4.1.7483.2.1.1.2.17.21.1.1 |
tnSysIpv6AclEthIfFilterRowStatusThe status of EthIf Filter. Set to 4 (createAndGo) to add filter in the interface. Set to 6 (destroy) to remove the filter in the interface.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.7483.2.1.1.2.17.21.1.2 |
tnSysIpv6AclEthIfFilterIDIdentifier for the ACL filter being associated with the specified EthIf and direction. It could be either an integer in the range of (100-199) or a string of up to 30 case-sensitive alphanumeric characters, where the first character is always a letter, representing an existing ACL Filter.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.17.21.1.3 |
tnSysIpv6AclEthIfFilterEnableEnable or disable the IPV6 ACL filter associated with the specified EthIf and direction.rw Enumeration .1.3.6.1.4.1.7483.2.1.1.2.17.21.1.4 |
tnSysIpv6AclEthIfFilterSystemDefaultIndicates if ACL EthIf is added by the system or a user. Valid values are: true - ACL interface is added by the system. false - ACL interface is added by a user.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.1.1.2.17.21.1.5 |
tnSysIpAclAttributeTotalThis parameter indicates the total IPACL rules can be supported in tnSysIpAclTable.ro Integer32 .1.3.6.1.4.1.7483.2.1.1.2.17.22 |
tnSysIpAclTableTable of IP ACL rule. An ACL rule is a set of packet field descriptors that can be tested against a packet. For a rule to match, each of its field descriptors must fit the data in the packet. SEQUENCE OF TnSysIpAclEntry .1.3.6.1.4.1.7483.2.1.1.2.17.23 |
tnSysIpAclEntry. TnSysIpAclEntry .1.3.6.1.4.1.7483.2.1.1.2.17.23.1 |
tnSysIpAclIndexThe values of 1 to 512 represent the index of IPACL. Default is the number of existing rules + 1, or a number between 1 and the number of existing rules (in this case existing rules after indes will be shifted to index + 1). For modify: an index of an existing rule. For delete: a delete will shift existing rules after index to index - 1. The maximum number of ACL rules is 512. The valid index range is from 1 to 512. If index is not provided by CLI/NMS when a new rule is added, index 65535 shall be used, NE SW will add a new rule using the index with the number of existing rules + 1. Integer32 .1.3.6.1.4.1.7483.2.1.1.2.17.23.1.1 |
tnSysIpAclDescShort description about the purpose of this rule.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.17.23.1.2 |
tnSysIpAclAccessIDThe access ID of the ACL to be created. It could be one of the following strings: SSH, MAINTSSH, ALTCLI, SNMP, DHCP, OA, GNMIGRPC, RADIUS, NTP, OSPF, ICMP, TRACERT, MCLAG, SYSLOGU, SFTPC or IP.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.17.23.1.3 |
tnSysIpAclInterfaceAccess identifier for the interface Index. It could be one of the following cases: - 41: All - 42: LAN=LAN1+LAN2 - 43: All ETHIF - Ifindex of LAN1 - ifindex of LAN2 - ifindex of CIT - tnEthIfIndex of EthIF, 1...30 for TPS-24; 1...14 for TPS-12.rw Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.17.23.1.4 |
tnSysIpAclActionAction to be taken on packets matching the specified ACL pattern. Valid values are: accept - allow the packet if it matches all the pattern descriptors drop - matching packets are discarded reject - matching packets are discarded; an ICMP error message is sent back log - log the packet if it matches all the pattern descriptors.rw Enumeration .1.3.6.1.4.1.7483.2.1.1.2.17.23.1.5 |
tnSysIpAclSrcPortTCP/UDP source port. It can be a range[0-65535:0-65535].rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.17.23.1.6 |
tnSysIpAclDestPortTCP/UDP destination port. It can be a range[0-65535:0-65535].rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.17.23.1.7 |
tnSysIpAclIcmpTypeICMP Type identifier. It is applicable only when IPPROTOCOL is ICMP. If specified, the pattern will match only packets with this exact ICMP type. Some of the most commonly used ICMP types are: 0 Echo Reply [RFC792] 3 Destination Unreachable[RFC792] 5 Redirect[RFC792] 9 Router Advertisement[RFC1256] 42-255 Reserved.rw Integer32 .1.3.6.1.4.1.7483.2.1.1.2.17.23.1.8 |
tnSysIpAclIcmpCodeICMP code field. It is applicable only when IP protocol is ICMP and is used along with certain ICMP types to further specify the message type. It must also specify the ICMP type when setting this parameter. If specified, the pattern will only match packets with this exact ICMP code value. For example, there are a few ICMPCODEs associated with the ICMPTYPE Redirect [RFC792]: 0 Redirect Datagram for the Network (or subnet) 1 Redirect Datagram for the Host 2 Redirect Datagram for the Type of Service and Network 3 Redirect Datagram for the Type of Service and Host.rw Integer32 .1.3.6.1.4.1.7483.2.1.1.2.17.23.1.9 |
tnSysIpAclIpProtocolIP Protocol. It can be specified by explicit protocol number (Integer, 0 to 255) or by keyword. Some common protocol types are listed below: ICMP - IP protocol is ICMP (1) IPIP - IP protocol is IPIP (4) TCP - IP protocol is TCP (6) UDP - IP protocol is UDP (17) RSVP - IP protocol is RSVP (46) GRE - IP protocol is GRE (47) OSPF - IP protocol is OSPF (89) <other protocol> - Specify IP protocol number: 0 to 255.rw OCTET STRING .1.3.6.1.4.1.7483.2.1.1.2.17.23.1.10 |
tnSysIpAclSrcAddrSource IP address. It can be specified explicitly to match only packets that originate from a particular address or can be used along with the SrcPrefix parameter to specify a range of supported originating IP addresses.rw IpAddress .1.3.6.1.4.1.7483.2.1.1.2.17.23.1.11 |
tnSysIpAclSrcPrefixSource IP mask prefix. If the SrcAddr is specified and the SrcPrefix is unspecified (0), the originating IP address of the packet must match the SrcAddr exactly. Otherwise, the pattern will allow packets whose originating IP is within the range implied by the source IP and subnet mask. This parameter is not valid unless the SrcAddr is also specified.rw Integer32 .1.3.6.1.4.1.7483.2.1.1.2.17.23.1.12 |
tnSysIpAclDestAddrDestination IP address. It can be specified explicitly to match only packets that originate from a particular address or can be used along with the DestPrefix parameter to specify a range of supported destination IP addresses.rw IpAddress .1.3.6.1.4.1.7483.2.1.1.2.17.23.1.13 |
tnSysIpAclDestPrefixDestination IP Mask Prefix. If the DestAddr is specified and the DestPrefix is unspecified (0), The originating IP address of the packet must match the DestAddr exactly. Otherwise, the pattern will allow packets whose originating IP is within the range implied by the source IP and subnet mask. This parameter is not valid unless the DestAddr is also specified.rw Integer32 .1.3.6.1.4.1.7483.2.1.1.2.17.23.1.14 |
tnSysIpAclIpFragmentIP Fragmentation. True means that the filtering is done on all fragments, not just on the initial one (assuming the following ones are ok). Valid values are: true - pattern is an IP false - pattern is not an IP fragment.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.1.1.2.17.23.1.15 |
tnSysIpAclTcpEstablishTCP established flag. It matches a packet depending on whether the TCP flags in the IP header correspond to the established state. Valid values are: true - TCP flags correspond to established state false - TCP flags do not correspond to established local - TCP flags correspond to established state only for destination to local NE.rw Enumeration .1.3.6.1.4.1.7483.2.1.1.2.17.23.1.16 |
tnSysIpAclStatCountPacket match counter. It is incremented whenever a packet matches the specified ACL pattern in the filter. This counter will be incremented regardless of the provisioned action on that pattern.ro Counter32 .1.3.6.1.4.1.7483.2.1.1.2.17.23.1.17 |
tnSysIpAclAdminStateThe admin status of IPACL. All the IPACL rules will be generated automatically when NE DB is generated for the first time. For example, we may have the 512 rules that are generated by default including the default IPACL rules. All default IPACL rules have AdminState 'active(1)', while others have AdminState 'deactivate(2)'. Only items with 'active(1)' will be sent to Linux IPTable for further processing. The item with AdminState 'deactivate(2)' will be removed from Linux IPTable. For example, we have the following default rules: IPACL index IPACL AdminState 1 active 2 active 3 active If a new IPACL rule is activated after IPACL index 3, then we have: IPACL index, IPACL Adminstate 1 active 2 active 3 active 4 active If a new IPACL rule is activated after IPACL index 2, then we have: IPACL index, IPACL Adminstate 1 active 2 active 3 active <- newly added 4 active <- change IPACL index 3 to 4 5 active <- change IPACL index 4 to 5 If index 2 is deactivated, then we have: IPACL index, IPACL Adminstate 1 active 2 active <- change IPACL index 3 to 2 3 active <- change IPACL index 4 to 3 4 active <- change IPACL index 5 to 4 Only the rules with 'AdminState(1)' can be retrieved.rw Enumeration .1.3.6.1.4.1.7483.2.1.1.2.17.23.1.18 |
tnSysIpv6AclAttributeTotalThis parameter indicates the total IPACL rules can be supported in tnSysIpv6AclTable.ro Integer32 .1.3.6.1.4.1.7483.2.1.1.2.17.24 |
tnSysIpv6AclTableTable of IP ACL rule. An ACL rule is a set of packet field descriptors that can be tested against a packet. For a rule to match, each of its field descriptors must fit the data in the packet. SEQUENCE OF TnSysIpv6AclEntry .1.3.6.1.4.1.7483.2.1.1.2.17.25 |
tnSysIpv6AclEntry. TnSysIpv6AclEntry .1.3.6.1.4.1.7483.2.1.1.2.17.25.1 |
tnSysIpv6AclIndexThe values of 1 to 512 represent the index of IPACL. Default is the number of existing rules + 1, or a number between 1 and the number of existing rules (in this case existing rules after indes will be shifted to index + 1). For modify: an index of an existing rule. For delete: a delete will shift existing rules after index to index - 1. The maximum number of ACL rules is 512. The valid index range is from 1 to 512. If index is not provided by CLI/NMS when a new rule is added, index 65535 shall be used, NE SW will add a new rule using the index with the number of existing rules + 1. Integer32 .1.3.6.1.4.1.7483.2.1.1.2.17.25.1.1 |
tnSysIpv6AclDescShort description about the purpose of this rule.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.17.25.1.2 |
tnSysIpv6AclAccessIDThe access ID of the ACL to be created, it could be one of the following strings: SSH, MAINTSSH, ALTCLI, SNMP, OA, NMIGRPC, RADIUS, NTP, ICMPV6, TRACERT, MCLAG, SYSLOGU, SFTPC or IP.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.17.25.1.3 |
tnSysIpv6AclInterfaceAccess identifier for the interface Index. It could be one of the following cases: - 41: All - 42: LAN=LAN1+LAN2 - 43: All ETHIF - Ifindex of LAN1 - ifindex of LAN2 - ifindex of CIT - tnEthIfIndex of EthIF, 1...30 for TPS-24, 1...14 for TPS-12.rw Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.17.25.1.4 |
tnSysIpv6AclActionAction to be taken on packets matching the specified ACL pattern. Valid values are: accept - allow the packet if it matches all the pattern descriptors drop - matching packets are discarded reject - matching packets are discarded; an ICMP error message is sent back log - log the packet if it matches all the pattern descriptors.rw Enumeration .1.3.6.1.4.1.7483.2.1.1.2.17.25.1.5 |
tnSysIpv6AclSrcPortTCP/UDP source port. It can be a range[0-65535:0-65535]rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.17.25.1.6 |
tnSysIpv6AclDestPortTCP/UDP destination port. It can be a range[0-65535:0-65535].rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.17.25.1.7 |
tnSysIpv6AclIcmpTypeICMP Type identifier. It is applicable only when IPPROTOCOL is ICMP. If specified, the pattern will match only packets with this exact ICMP type. Some of the most commonly used ICMP types are: 0 Echo Reply [RFC792] 3 Destination Unreachable[RFC792] 5 Redirect[RFC792] 9 Router Advertisement[RFC1256] 42-255 Reserved.rw Integer32 .1.3.6.1.4.1.7483.2.1.1.2.17.25.1.8 |
tnSysIpv6AclIcmpCodeICMP code field. It is applicable only when IP protocol is ICMP and is used along with certain ICMP types to further specify the message type. It must also specify the ICMP type when setting this parameter. If specified, the pattern will only match packets with this exact ICMP code value. For example, there are a few ICMPCODEs associated with the ICMPTYPE Redirect [RFC792]: 0 Redirect Datagram for the Network (or subnet) 1 Redirect Datagram for the Host 2 Redirect Datagram for the Type of Service and Network 3 Redirect Datagram for the Type of Service and Host.rw Integer32 .1.3.6.1.4.1.7483.2.1.1.2.17.25.1.9 |
tnSysIpv6AclIpProtocolIP Protocol. It can be specified by explicit protocol number (Integer, 0 to 255) or by keyword. Some common protocol types are listed below: ICMP - IP protocol is ICMP (1) IPIP - IP protocol is IPIP (4) TCP - IP protocol is TCP (6) UDP - IP protocol is UDP (17) RSVP - IP protocol is RSVP (46) GRE - IP protocol is GRE (47) OSPF - IP protocol is OSPF (89) <other protocol> - Specify IP protocol number: 0 to 255.rw OCTET STRING .1.3.6.1.4.1.7483.2.1.1.2.17.25.1.10 |
tnSysIpv6AclSrcAddrSource IPV6 address. It can be specified explicitly to match only packets that originate from a particular address or can be used along with the SrcPrefixLen parameter to specify a range of supported originating IPV6 addresses.rw InetAddressIPv6 (INET-ADDRESS-MIB) .1.3.6.1.4.1.7483.2.1.1.2.17.25.1.11 |
tnSysIpv6AclSrcPrefixLenDenotes the length of source IPV6 address prefix. A value of n corresponds to an IP address maskthat has n contiguous1-bits from the most significant bit (MSB), with all other bits set to 0.rw InetAddressPrefixLength (INET-ADDRESS-MIB) .1.3.6.1.4.1.7483.2.1.1.2.17.25.1.12 |
tnSysIpv6AclDestAddrDestination IPV6 address. It can be specified explicitly to match only packets that originate from a particular address or can be used along with the DestPrefixLen parameter to specify a range of supported destination IPV6 addresses.rw InetAddressIPv6 (INET-ADDRESS-MIB) .1.3.6.1.4.1.7483.2.1.1.2.17.25.1.13 |
tnSysIpv6AclDestPrefixLenDenotes the length of destination IPV6 address prefix. A value of n corresponds to an IP address maskthat has n contiguous1-bits from the most significant bit (MSB), with all other bits set to 0.rw InetAddressPrefixLength (INET-ADDRESS-MIB) .1.3.6.1.4.1.7483.2.1.1.2.17.25.1.14 |
tnSysIpv6AclTcpEstablishTCP established flag. It matches a packet depending on whether the TCP flags in the IP header correspond to the established state. Valid values are: true - TCP flags correspond to established state false - TCP flags do not correspond to established local - TCP flags correspond to established state only for destination to local NE.rw Enumeration .1.3.6.1.4.1.7483.2.1.1.2.17.25.1.15 |
tnSysIpv6AclStatCountPacket match counter. It is incremented whenever a packet matches the specified ACL pattern in the filter. This counter will be incremented regardless of the provisioned action on that pattern.ro Counter32 .1.3.6.1.4.1.7483.2.1.1.2.17.25.1.16 |
tnSysIpv6AclAdminStateThe admin status of IPACL. All the IPACL rules will be generated automatically when NE DB is generated for the first time. For example, we may have the 512 rules that are generated by default including the default IPACL rules. All default IPACL rules have AdminState 'active(1)', while others have AdminState 'deactivate(2)'. Only items with 'active(1)' will be sent to Linux IPTable for further processing, the item with AdminState 'deactivate(2)' will be removed from Linux IPTable. For example, we have the following default rules: IPACL index, IPACL AdminState 1 active 2 active 3 active If a new IPACL rule is activated after IPACL index 3, then we have: IPACL index, IPACL Adminstate 1 active 2 active 3 active 4 active If a new IPACL rule is activated after IPACL index 2, then we have: IPACL index, IPACL Adminstate 1 active 2 active 3 active <- newly added 4 active <- change IPACL index 3 to 4 5 active <- change IPACL index 4 to 5 If index 2 is deactivated, then we have: IPACL index, IPACL Adminstate 1 active 2 active <- change IPACL index 3 to 2 3 active <- change IPACL index 4 to 3 4 active <- change IPACL index 5 to 4 Only the rules with AdminState(1) can be retrieved.rw Enumeration .1.3.6.1.4.1.7483.2.1.1.2.17.25.1.17 |
tnSysNtpServerIdStats OBJECT IDENTIFIER .1.3.6.1.4.1.7483.2.1.1.2.18 |
tnSysNtpServerIdStatsTable. SEQUENCE OF TnSysNtpServerIdStatsEntry .1.3.6.1.4.1.7483.2.1.1.2.18.1 |
tnSysNtpServerIdStatsEntry. TnSysNtpServerIdStatsEntry .1.3.6.1.4.1.7483.2.1.1.2.18.1.1 |
tnSysNtpServerIdStatsIndexFor the 1830 PSS-32. The maximum number of supported NTP servers is 8. Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.18.1.1.1 |
tnSysNtpServerIdStatsSelectCharacter to be displayed is one of the following: '*' - selected reference '+' - member of the alternate references ' ' - disqualified.ro SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.18.1.1.2 |
tnSysNtpServerIdStatsIpNTP server IP address.ro SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.18.1.1.3 |
tnSysNtpServerIdStatsRefIdNTP reference ID.ro SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.18.1.1.4 |
tnSysNtpServerIdStatsStrtmLevel of reference, from 1 - 16.ro SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.18.1.1.5 |
tnSysNtpServerIdStatsClockTypeClock type: 'u' - unicast 'b' - broadcast 'l' - local.ro SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.18.1.1.6 |
tnSysNtpServerIdStatsPollPolling interval in log base 2 seconds.ro SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.18.1.1.7 |
tnSysNtpServerIdStatsReach8 bit octal number representing success of last 8 attempts.ro SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.18.1.1.8 |
tnSysNtpServerIdStatsDelayRound trip delay to the reference server.ro SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.18.1.1.9 |
tnSysNtpServerIdStatsOffset.ro SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.18.1.1.10 |
tnSysNtpServerIdStatsJitter.ro SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.18.1.1.11 |
tnSysNtpServerIdStatsKeyIndex.ro Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.18.1.1.12 |
tnSysFtpServer OBJECT IDENTIFIER .1.3.6.1.4.1.7483.2.1.1.2.19 |
tnSysFtpServerEnabledtrue - FTP server function is enabled. false - FTP server function is disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.1.1.2.19.1 |
tnSysFtpServerUserIdThe FTP server user ID.ro SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.19.2 |
tnSysFtpServerPasswordThe FTP server password. When read, this attribute will return '********'.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.19.3 |
tnSysNtpServerAuthentication OBJECT IDENTIFIER .1.3.6.1.4.1.7483.2.1.1.2.20 |
tnSysNtpServerAuthenticationAttributeTotal.ro Integer32 .1.3.6.1.4.1.7483.2.1.1.2.20.1 |
tnSysNtpServerAuthenticationTable. SEQUENCE OF TnSysNtpServerAuthenticationEntry .1.3.6.1.4.1.7483.2.1.1.2.20.2 |
tnSysNtpServerAuthenticationEntry. TnSysNtpServerAuthenticationEntry .1.3.6.1.4.1.7483.2.1.1.2.20.2.1 |
tnSysNtpServerAuthenticationKeyIndexNTP server authentication key index. Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.20.2.1.1 |
tnSysNtpServerAuthenticationRowStatusStatus of this NTP server. Supported values: 1 - active 4 - createAndGo 6 - destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.7483.2.1.1.2.20.2.1.2 |
tnSysNtpServerAuthenticationKeyTypeNTP server authentication key type.rw Enumeration .1.3.6.1.4.1.7483.2.1.1.2.20.2.1.3 |
tnSysNtpServerAuthenticationKeyNTP server authentication key.rw OCTET STRING .1.3.6.1.4.1.7483.2.1.1.2.20.2.1.4 |
tnNeDiscovery OBJECT IDENTIFIER .1.3.6.1.4.1.7483.2.1.1.2.21 |
tnNeDiscoveryAttributeTotal.ro Integer32 .1.3.6.1.4.1.7483.2.1.1.2.21.1 |
tnNeDiscoveryTable. SEQUENCE OF TnNeDiscoveryEntry .1.3.6.1.4.1.7483.2.1.1.2.21.2 |
tnNeDiscoveryEntry. TnNeDiscoveryEntry .1.3.6.1.4.1.7483.2.1.1.2.21.2.1 |
tnNeDiscoveryIndexUnique name given by the NMS. SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.21.2.1.1 |
tnNeDiscoveryFilename.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.7483.2.1.1.2.21.2.1.2 |
tnNeDiscoveryControlControls the discovery, i.e., starts or aborts it.rw Enumeration .1.3.6.1.4.1.7483.2.1.1.2.21.2.1.3 |
tnNeDiscoveryStatusThe discovery status.ro Enumeration .1.3.6.1.4.1.7483.2.1.1.2.21.2.1.4 |
tnNeDiscoveryErrorCodeThe discovery error code.ro Enumeration .1.3.6.1.4.1.7483.2.1.1.2.21.2.1.5 |
tnNeDiscoveryServerIpThe discovery server IP address.rw IpAddress .1.3.6.1.4.1.7483.2.1.1.2.21.2.1.6 |
tnNeDiscoveryServerProtocolThe discovery server protocol.rw AluWdmNewTransferProtocol (TROPIC-TC) .1.3.6.1.4.1.7483.2.1.1.2.21.2.1.7 |
tnNeDiscoveryServerUserIdThe user ID used to access the server.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.21.2.1.8 |
tnNeDiscoveryServerPasswordThe password used to access the server. When read, this attribute will return an empty string if the password has not been set and '********' if it has been set.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.21.2.1.9 |
tnNeDiscoveryServerTimeOutTimeout from NMS for the discovery request.rw Integer32 .1.3.6.1.4.1.7483.2.1.1.2.21.2.1.10 |
tnNeDiscoveryRowStatusThe row status of this discovery.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.7483.2.1.1.2.21.2.1.11 |
tnNeDiscoveryServerInetAddressTypeThe value specifies the type of Internet address stored in tnNeDiscoveryServerInetAddress.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.7483.2.1.1.2.21.2.1.12 |
tnNeDiscoveryServerInetAddressIndicates the IPv6 address of the log server.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.7483.2.1.1.2.21.2.1.13 |
tnNeDiscoveryDeltaFilename.rwdeprecated SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.7483.2.1.1.2.21.2.1.14 |
tnNeDiscoveryDeltaFileFlagDelta File Flag.rw Enumeration .1.3.6.1.4.1.7483.2.1.1.2.21.2.1.15 |
tnNeDiscoveryDeltaSyncStatusActive sync status.ro SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.21.2.1.16 |
tnNeDiscoveryPort.rw Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.21.2.1.17 |
tnSysOtdrScan OBJECT IDENTIFIER .1.3.6.1.4.1.7483.2.1.1.2.22 |
tnSysOtdrScanSystemProfile OBJECT IDENTIFIER .1.3.6.1.4.1.7483.2.1.1.2.22.1 |
tnSysOtdrScanSystemProfileAttributeTotal.ro Integer32 .1.3.6.1.4.1.7483.2.1.1.2.22.1.1 |
tnSysOtdrScanSystemProfileTable. SEQUENCE OF TnSysOtdrScanSystemProfileEntry .1.3.6.1.4.1.7483.2.1.1.2.22.1.2 |
tnSysOtdrScanSystemProfileEntry. TnSysOtdrScanSystemProfileEntry .1.3.6.1.4.1.7483.2.1.1.2.22.1.2.1 |
tnSysOtdrScanSystemProfileIdUnique identifier for the profile. Range is from 1 to 9. Integer32 .1.3.6.1.4.1.7483.2.1.1.2.22.1.2.1.1 |
tnSysOtdrScanSystemProfileDescriptionDescribes the scan profile.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.22.1.2.1.2 |
tnSysOtdrScanSystemProfileWaveLengthThe wavelength used for the OTDR scan. The wavelength is 1610 nm, and is not configurable.ro Unsigned32 UNITS "nanometers" .1.3.6.1.4.1.7483.2.1.1.2.22.1.2.1.3 |
tnSysOtdrScanSystemProfilePulseLengthLength of the pulse. Current values: 5, 10, 30, 100, 300, 1000, 3000, 10000, and 20000.rw Unsigned32 UNITS "nanoseconds" .1.3.6.1.4.1.7483.2.1.1.2.22.1.2.1.4 |
tnSysOtdrScanSystemProfileRangeThe range of the span that is being probed in meters. Current values: 500, 1000, 2000, 5000, 10000, 20000, 40000, 80000, 160000 and 260000.rw Unsigned32 UNITS "meters" .1.3.6.1.4.1.7483.2.1.1.2.22.1.2.1.5 |
tnSysOtdrScanSystemProfileResolutionDistance resolution of the OTDR scan. Current values: 40, 80, 160, 320, 640, 1200, 2500, 5000, 10000, 20000, 40000, 80000, and 160000.rw Unsigned32 UNITS "millimeters" .1.3.6.1.4.1.7483.2.1.1.2.22.1.2.1.6 |
tnSysOtdrScanSystemProfileAvgTimeSignal averaging time for a scan range. Current range: 5 to 300.rw Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.22.1.2.1.7 |
tnSysOtdrScanSystemProfileEventThresholdSys Otdr Scan Event Threshold. Current range: 5 to 100.rw Unsigned32 UNITS "mB" .1.3.6.1.4.1.7483.2.1.1.2.22.1.2.1.8 |
tnSysOtdrScanSystemProfileIORSys Otdr Scan IOR. Current range: 1400 to 1600.rw Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.22.1.2.1.9 |
tnSysOtdrScanTransfer OBJECT IDENTIFIER .1.3.6.1.4.1.7483.2.1.1.2.22.2 |
tnSysOtdrScanTransferRemoteHostIpOTDR scan transfer remote host IP address.rw IpAddress .1.3.6.1.4.1.7483.2.1.1.2.22.2.1 |
tnSysOtdrScanTransferCommandOTDR scan transfer command.rw Enumeration .1.3.6.1.4.1.7483.2.1.1.2.22.2.2 |
tnSysOtdrScanTransferRemotePathOTDR scan transfer remote path.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.22.2.3 |
tnSysOtdrScanTransferStatusThis attribute indicates the status of the previously executed tnSysOtdrScanTransferCommand operation.ro AluWdmTransferStatus .1.3.6.1.4.1.7483.2.1.1.2.22.2.4 |
tnSysOtdrScanTransferFilenameThis attribute indicates the filename for the OTDR file transfer performed on the node. If it specifies empty string then bulk transfer the files from NE to RFs. And if it specifies file name then it is single file transfer. File information can be from the tnOtdrScanStatusSuccessNotif trap.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.22.2.5 |
tnSysOtdrScanTransferProtocolThis attributes indicates the OTDR scan transfer protocol. Currently, only sftp/ftp is supported.rw AluWdmTransferProtocol (TROPIC-TC) .1.3.6.1.4.1.7483.2.1.1.2.22.2.6 |
tnSysOtdrScanTransferUserIdThe userId is used to access the RFS.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.22.2.7 |
tnSysOtdrScanTransferPasswordThe password is used to access the RFS. When read, this attribute will return an empty string if the password has not been set and '********' if it has been set.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.22.2.8 |
tnSysOtdrScanTransferInetAddressTypeThe value specifies the type of Internet address stored in OTDR SCANrw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.7483.2.1.1.2.22.2.9 |
tnSysOtdrScanTransferInetAddressIndicates the IPv6 address of the OTDR SCANrw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.7483.2.1.1.2.22.2.10 |
tnSysOtdrScanTransferPortThis attribute indicates the otdr port.rw Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.22.2.11 |
tnSysOtdrScanSystemProfileM OBJECT IDENTIFIER .1.3.6.1.4.1.7483.2.1.1.2.22.3 |
tnSysOtdrScanSystemProfileMAttributeTotal.ro Integer32 .1.3.6.1.4.1.7483.2.1.1.2.22.3.1 |
tnSysOtdrScanSystemProfileMTable. SEQUENCE OF TnSysOtdrScanSystemProfileMEntry .1.3.6.1.4.1.7483.2.1.1.2.22.3.2 |
tnSysOtdrScanSystemProfileMEntry. TnSysOtdrScanSystemProfileMEntry .1.3.6.1.4.1.7483.2.1.1.2.22.3.2.1 |
tnSysOtdrScanSystemProfileMIdUnique identifier for the profile. Range is from 1 to 7. Integer32 .1.3.6.1.4.1.7483.2.1.1.2.22.3.2.1.1 |
tnSysOtdrScanSystemProfileMDescriptionDescribes the scan profile.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.22.3.2.1.2 |
tnSysOtdrScanSystemProfileMWaveLengthThe wavelength used for the OTDR scan. The wavelength is 1610 nm, and is not configurable.ro Unsigned32 UNITS "nanometers" .1.3.6.1.4.1.7483.2.1.1.2.22.3.2.1.3 |
tnSysOtdrScanSystemProfileMPulseLengthLength of the pulse. Current values: 5, 10, 30, 100, 300, 1000, 3000, 10000, and 20000.rw Unsigned32 UNITS "nanoseconds" .1.3.6.1.4.1.7483.2.1.1.2.22.3.2.1.4 |
tnSysOtdrScanSystemProfileMRangeThe range of the span that is being probed in meters. Current values: 500, 1000, 2000, 5000, 10000, 20000, 40000, 80000, 160000 and 260000.rw Unsigned32 UNITS "meters" .1.3.6.1.4.1.7483.2.1.1.2.22.3.2.1.5 |
tnSysOtdrScanSystemProfileMResolutionDistance resolution of the OTDR scan. Current values: 40, 80, 160, 320, 640, 1200, 2500, 5000, 10000, 20000, 40000, 80000, and 160000.rw Unsigned32 UNITS "millimeters" .1.3.6.1.4.1.7483.2.1.1.2.22.3.2.1.6 |
tnSysOtdrScanSystemProfileMAvgTimeSignal averaging time for a scan range. Current range: 5 to 300.rw Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.22.3.2.1.7 |
tnSysOtdrScanSystemProfileMEventThresholdSys Otdr Scan Event Threshold. Current range: 5 to 100.rw Unsigned32 UNITS "mB" .1.3.6.1.4.1.7483.2.1.1.2.22.3.2.1.8 |
tnSysOtdrScanSystemProfileMIORSys Otdr Scan IOR. Current range: 1400 to 1600.ro Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.22.3.2.1.9 |
tnSysOtdrScanResultsTransfer OBJECT IDENTIFIER .1.3.6.1.4.1.7483.2.1.1.2.22.4 |
tnSysOtdrScanResultsTransferRemoteHostIpOTDR scan results transfer remote host IP address.rw IpAddress .1.3.6.1.4.1.7483.2.1.1.2.22.4.1 |
tnSysOtdrScanResultsTransferProtocolThis attributes indicates the OTDR scan results transfer protocol. Currently, only sftp/ftp is supported.rw AluWdmNewTransferProtocol (TROPIC-TC) .1.3.6.1.4.1.7483.2.1.1.2.22.4.2 |
tnSysOtdrScanResultsTransferUserIdThe userId is used to access the RFS.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.22.4.3 |
tnSysOtdrScanResultsTransferPasswordThe password is used to access the RFS. When read, this attribute will return an empty string if the password has not been set and '********' if it has been set.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.22.4.4 |
tnSysOtdrScanResultsTransferRemotePathOTDR scan results transfer remote path.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.22.4.5 |
tnSysOtdrScanResultsTransferCommandOTDR scan results transfer command.rw Enumeration .1.3.6.1.4.1.7483.2.1.1.2.22.4.6 |
tnSysOtdrScanResultsTransferFilenameThis attribute indicates the filename for the OTDR file results transfer performed on the node.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.22.4.7 |
tnSysOtdrScanResultsTransferRecentSuccessFileThis attribute indicates the filename for the recent successful OTDR scan results file transfered on the node.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.7483.2.1.1.2.22.4.8 |
tnSysOtdrScanResultsTransferStatusThis attribute indicates the status of the previously executed tnSysOtdrScanResultsTransferStatus operation.ro AluWdmTransferStatus .1.3.6.1.4.1.7483.2.1.1.2.22.4.9 |
tnSysOtdrScanResultsLastTransferTimestampThe date and time when the last file transfer was completed.ro Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.22.4.10 |
tnSysOtdrScanResultsTransferRemoteInetAddressTypeThe value specifies the type of Internet address stored in tnSysOtdrScanResultsTransferRemoteInetAddress.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.7483.2.1.1.2.22.4.11 |
tnSysOtdrScanResultsTransferRemoteInetAddressIndicates the IPv6 address of the remote server.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.7483.2.1.1.2.22.4.12 |
tnSysOtdrScanResultsTransferPortThis attributes indicates the otdr port.rw Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.22.4.13 |
tnSysOtdrScanResultsTransferRemoveFileFromNERemove the selected .sor file from the NE.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.7483.2.1.1.2.22.4.14 |
tnClusterObjs OBJECT IDENTIFIER .1.3.6.1.4.1.7483.2.1.1.2.23 |
tnClusterTable. SEQUENCE OF TnClusterEntry .1.3.6.1.4.1.7483.2.1.1.2.23.1 |
tnClusterEntry. TnClusterEntry .1.3.6.1.4.1.7483.2.1.1.2.23.1.1 |
tnClusterRowStatus.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.7483.2.1.1.2.23.1.1.1 |
tnClusterFarEndNode. OCTET STRING .1.3.6.1.4.1.7483.2.1.1.2.23.1.1.2 |
tnClusterIpAddress.rw IpAddress .1.3.6.1.4.1.7483.2.1.1.2.23.1.1.3 |
tnClusterlinkStatusCluster link status.rw Enumeration .1.3.6.1.4.1.7483.2.1.1.2.23.1.1.4 |
tnClusterInetAddressTypeThe value specifies the type of Internet address stored in Cluster.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.7483.2.1.1.2.23.1.1.5 |
tnClusterInetAddressIndicates the IPv6 address of the Cluster.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.7483.2.1.1.2.23.1.1.6 |
tnSysPmFetchBulk OBJECT IDENTIFIER .1.3.6.1.4.1.7483.2.1.1.2.24 |
tnSysPmFetchBulkStartIntiates the PM Fetch bulk operation.rw TnCommand (TROPIC-TC) .1.3.6.1.4.1.7483.2.1.1.2.24.1 |
tnSysPmFetchBulkStatusIndicates the status of the PM Fetch Bulk.ro Enumeration .1.3.6.1.4.1.7483.2.1.1.2.24.2 |
tnSysPmFetchBulkRemoteHostIpPM Fetch Bulk remote host IP address.rw IpAddress .1.3.6.1.4.1.7483.2.1.1.2.24.3 |
tnSysPmFetchBulkUserIdIndicates the username of the user who intiates PM fetch Bulk operation.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.24.4 |
tnSysPmFetchBulkPasswordIndicates the password of the user who intiates PM fetch Bulk operation.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.24.5 |
tnSysPmFetchBulkRemotePathPM fetch Bulk remote path.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.24.6 |
tnSysPmFetchBulkStatsInterval.rw Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.24.7 |
tnSysPmFetchBulkBinnedStatsBin.rw Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.24.8 |
tnSysPmFetchBulkShelfNum.rw Integer32 .1.3.6.1.4.1.7483.2.1.1.2.24.9 |
tnSysDebugTransfer OBJECT IDENTIFIER .1.3.6.1.4.1.7483.2.1.1.2.25 |
tnSysDebugTransferRemoteHostIpDebug dump transfer remote host IP address.rw IpAddress .1.3.6.1.4.1.7483.2.1.1.2.25.1 |
tnSysDebugTransferCommandDebug dump transfer command.rw Enumeration .1.3.6.1.4.1.7483.2.1.1.2.25.2 |
tnSysDebugTransferRemotePathDebug dump transfer remote path.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.25.3 |
tnSysDebugTransferStatusThis attribute indicates the status of the previously executed tnSysDebugTransferCommand operation.ro AluWdmTransferStatus .1.3.6.1.4.1.7483.2.1.1.2.25.4 |
tnSysDebugTransferProtocolThis attributes indicates the Debug dump transfer protocol. Currently, only sftp/ftp is supported.rw AluWdmNewTransferProtocol (TROPIC-TC) .1.3.6.1.4.1.7483.2.1.1.2.25.5 |
tnSysDebugTransferUserIdThe userId is used to access the RFS.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.25.6 |
tnSysDebugTransferPasswordThe password is used to access the RFS. When read, this attribute will return an empty string if the password has not been set and '********' if it has been set.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.25.7 |
tnSysDebugTransferFilenameThis attribute indicates the filename for the Debug Dump file transfer performed on the node.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.7483.2.1.1.2.25.8 |
tnSysDebugTransferRecentSuccessFileThis attribute indicates the filename for the recent successful Debug Dump file transfered on the node.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.7483.2.1.1.2.25.9 |
tnSysDebugTransferTimestampThe date and time when the last file was completed.ro Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.25.10 |
tnSysDebugTransferShelfNumShelfNum where the transfer has to be initiated.rw Integer32 .1.3.6.1.4.1.7483.2.1.1.2.25.11 |
tnSysDebugTransferPercentCompletedThe percent completion of the previously executed operation.ro Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.25.12 |
tnSysDebugTransferRemoteInetAddressIndicates the IPv6 address of the remote server.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.7483.2.1.1.2.25.14 |
tnSysDebugTransferRemoteInetAddressTypeThe value specifies the type of Internet address stored in tnSysDebugTransferRemoteInetAddress.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.7483.2.1.1.2.25.15 |
tnSysDebugTransferScratchDirThis contains the file's size in KB, their access date and the filename as 3 attributes per output line format similar to output from ls -ogth.ro SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.25.16 |
tnSysDebugTransferIncludeInDumpsexpert - value for include-in-dumps shall have core files included. basic - value for include-in-dumps shall have core files omitted. occ - occ log transfer support for PSI2T.rw Enumeration .1.3.6.1.4.1.7483.2.1.1.2.25.17 |
tnSysDebugTransferPortThis attributes indicates the debugdump port.rw Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.25.18 |
tnSysLicenseInv OBJECT IDENTIFIER .1.3.6.1.4.1.7483.2.1.1.2.26 |
tnSysLicenseInvPathIp.rw IpAddress .1.3.6.1.4.1.7483.2.1.1.2.26.1 |
tnSysLicenseInvFile.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.26.2 |
tnSysLicenseInvProtocolThis attributes indicates the server protocol.rw AluWdmTransferProtocol (TROPIC-TC) .1.3.6.1.4.1.7483.2.1.1.2.26.3 |
tnSysLicenseInvUserIdThe userId used to access the License Inventory server.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.7483.2.1.1.2.26.4 |
tnSysLicenseInvPasswordThe password used to access the License Inventory server. When read, this attribute will return an empty string if the password has not been set and '********' if it has been set.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.7483.2.1.1.2.26.5 |
tnSysLicenseInvFileUploadOperTo display the status of License Inventory.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.1.1.2.26.6 |
tnSysLicenseInvPathInetAddressTypeThe value specifies the type of Internet address stored in tnSysLicenseInvPathInetAddress.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.7483.2.1.1.2.26.7 |
tnSysLicenseInvPathInetAddressIndicates the IPv6 address of the License Inv path.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.7483.2.1.1.2.26.8 |
tnSysLicenseInvLastOperPercentCompletedThe percent completion of the Last executed operation.ro Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.26.9 |
tnSysLicenseInvLastUploadFileNameThis attribute indicates the Last Upload filename for the License Inventory.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.7483.2.1.1.2.26.10 |
tnSysLicenseInvFileLastUploadStatusTo display the status of License Inventory.ro Enumeration .1.3.6.1.4.1.7483.2.1.1.2.26.11 |
tnSysLicenseInvFileLastUploadTimeStampThe date and time when the License Inventory last upload was completed.ro Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.26.12 |
tnSysLinux OBJECT IDENTIFIER .1.3.6.1.4.1.7483.2.1.1.2.28 |
tnSysLinuxRootUserIdThe Linux root user ID.ro SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.28.1 |
tnSysLinuxRootUserPasswordThe Linux root user password.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.28.2 |
tnSysLinuxApplUserIdThe Linux application user ID.ro SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.28.3 |
tnSysLinuxApplUserPasswordThe Linux application user password.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.28.4 |
tnSysLinuxRootPasswordStatusPassword status for maint1 If password is changed, the value is true. If password is not set (default), the value is false.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.1.1.2.28.5 |
tnSysLinuxApplPasswordStatusPassword status for maint2 If password is changed, the value is true. If password is not set (default), the value is false.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.1.1.2.28.6 |
tnSysLinuxRootUserStatusRemote access enable for Maint1 User.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.1.1.2.28.7 |
tnSysLinuxApplUserStatusRemote access enable for Maint2 User.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.1.1.2.28.8 |
tnSysLinuxLoginInactivityTimeOutInactivity timeout for Maint1 and Maint2 users. Current configurable range: 0 to 999.rw Unsigned32 UNITS "minutes" .1.3.6.1.4.1.7483.2.1.1.2.28.9 |
tnSysLinuxSmsUserIdThe System user ID.ro SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.28.10 |
tnSysLinuxSmsUserPasswordThe System user password.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.28.11 |
tnSysLinuxSmsPasswordStatus.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.1.1.2.28.12 |
tnSysLinuxSmsUserStatus.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.1.1.2.28.13 |
tnSysLinuxRootUserLocalStatus.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.1.1.2.28.14 |
tnSysLinuxSecurityCommit.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.1.1.2.28.15 |
tnSysLinuxRootUserPort.rw Enumeration .1.3.6.1.4.1.7483.2.1.1.2.28.16 |
tnSysIpAclIpv6SysDefault OBJECT IDENTIFIER .1.3.6.1.4.1.7483.2.1.1.2.29 |
tnSysIpAclIpv6RxActionDefault action to be taken on received (incoming) packets where ACL IPV6 is enabled but no pattern matches or no action is explicitly defined.rw Enumeration .1.3.6.1.4.1.7483.2.1.1.2.29.1 |
tnSysIpAclIpv6TxActionDefault action to be taken on transmitted (outgoing) packets where ACL IPV6 is enabled but no pattern matches or no action is explicitly defined.rw Enumeration .1.3.6.1.4.1.7483.2.1.1.2.29.2 |
tnSysIpAclIpv6SnmpCfgEnableIndicates whether or not ACL IPV6 configuration is supported via SNMP.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.1.1.2.29.3 |
tnSysIpAclIpv6CfgRestoreToDefaultIf setting to true, it will restore acl_ipv6 config to system default.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.1.1.2.29.4 |
tnSysIpAclIPv6ClearCounterClear IPv6ACL counter to zero.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.1.1.2.29.5 |
tnSysFileInitialization OBJECT IDENTIFIER .1.3.6.1.4.1.7483.2.1.1.2.30 |
tnSysFileInitializationRootThe path to the directory containing releases, relative to the TFTP server root directory. A forward slash will be prepended if it does not start with one.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.30.1 |
tnSysFileInitializationUserIdThe userId is used to access the RFS.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.30.2 |
tnSysFileInitializationPasswordThe password is used to access the RFS. When read, this attribute will return an empty string if the password has not been set and '********' if it has been set.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.30.3 |
tnSysFileInitializationFilenameThis attribute indicates the filename for the file initialization.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.7483.2.1.1.2.30.4 |
tnSysFileInitializationInetAddressTypeThe value specifies the type of Internet address stored in tnSysFileInitializationInetAddress.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.7483.2.1.1.2.30.5 |
tnSysFileInitializationInetAddressIndicates the IPv6 address.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.7483.2.1.1.2.30.6 |
tnSysBtInterface OBJECT IDENTIFIER .1.3.6.1.4.1.7483.2.1.1.2.31 |
tnSysBtInterfaceDescriptionBT Description.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.31.1 |
tnSysBtInterfaceIpAddrSet the IP address of the BT.rw IpAddress .1.3.6.1.4.1.7483.2.1.1.2.31.2 |
tnSysBtInterfaceIpSubMaskSubnet mask for BtIpSubMask.rw IpAddress .1.3.6.1.4.1.7483.2.1.1.2.31.3 |
tnSysBtInterfaceAdminStateAdministratively enable or disable the BT feature on the USB port. When enabled, the USB port will come up once a bluetooth dongle is plugged in.rw TropicAdminStateType (TROPIC-TC) .1.3.6.1.4.1.7483.2.1.1.2.31.4 |
tnSysBtInterfaceLinkIntegrityStatusBT link Integrity Status.ro TropicOperationalStateType (TROPIC-TC) .1.3.6.1.4.1.7483.2.1.1.2.31.5 |
tnSysBtInterfaceDHCPServerDynamic Host Configuration Protocol on the BT port.rw Enumeration .1.3.6.1.4.1.7483.2.1.1.2.31.6 |
tnSysBtInterfaceDHCPRangeThis is the range of the IP pool for the DHCP server. The port can dole out from 1 to up to 10 IP addresses, beginning with the BT port's IP address. This parameter is valid only when dhcp is enabled. For the BT port, the default value is 1, and thus the assigned IP address will be the next address after the BT port's address. For example, if the BT port is 172.16.2.1 (default value), then the assigned IP address for the attached device, i.e., smartphone, will be 172.16.2.2. Current configurable range: 1 to 10rw Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.31.7 |
tnSysBtInterfaceNodeSerialNumBT serial number.ro SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.31.8 |
tnSysBtInterfaceMacAddressThe value of tnSysBtInterfaceMacAddress specifies the mac address that is assigned to tnSysBtInterfaceMacAddress.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.7483.2.1.1.2.31.9 |
tnSysLicenseMgr OBJECT IDENTIFIER .1.3.6.1.4.1.7483.2.1.1.2.32 |
tnSysLicenseMgrKeepAliveTimerthe interval (in seconds) for the NE to send a keep-alive message to the license man-ager. The message will also automatically refresh the entitlements on the NE.rw Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.32.1 |
tnSysLicenseMgrPrimaryServerIpIndicates the IPv4 address of the CLM server 1.rw IpAddress .1.3.6.1.4.1.7483.2.1.1.2.32.2 |
tnSysLicenseMgrPrimaryServerInetAddressTypeThe value specifies the type of Internet address stored in tnSysLicenseMgrPrimaryServerInetAddress.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.7483.2.1.1.2.32.3 |
tnSysLicenseMgrPrimaryServerInetAddressIndicates the IPv6 address of the CLM server 1.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.7483.2.1.1.2.32.4 |
tnSysLicenseMgrSecondaryServerIpIndicates the IPv4 address of the CLM server 2.rw IpAddress .1.3.6.1.4.1.7483.2.1.1.2.32.5 |
tnSysLicenseMgrSecondaryServerInetAddressTypeThe value specifies the type of Internet address stored in tnSysLicenseMgrSecondaryServerInetAddress.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.7483.2.1.1.2.32.6 |
tnSysLicenseMgrSecondaryServerInetAddressIndicates the IPv6 address of the CLM server 2.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.7483.2.1.1.2.32.7 |
tnSysLicenseMgrPrimaryServerStatusIndicates the status of CLM Primary server.rw Enumeration .1.3.6.1.4.1.7483.2.1.1.2.32.8 |
tnSysLicenseMgrSecondaryServerStatusIndicates the status of CLM Secondary server.rw Enumeration .1.3.6.1.4.1.7483.2.1.1.2.32.9 |
tnSysLicenseMgrExpirationLicense Expiration date and time.ro SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.32.10 |
tnSysLicenseMgrTimeOutTimeout for the NE to wait for the response from CLM server. The failure is declared after the timeout is elapsed.rw Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.32.11 |
tnSysLicenseMgrRetriesSpecifies the number of attempts that the NE will try to contact the specified CLM server that has failed to respond during the previous request. If there is no response from the CLM server after the specified tries then the NE will try to contact the second CLM server if one is provisioned.rw Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.32.12 |
tnSysLicenseMgrLastRefreshLicense Last Refresh date and time.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.7483.2.1.1.2.32.13 |
tnSysLicenseMgrCertStatusIndicates the CLM Certificate Status.ro Enumeration .1.3.6.1.4.1.7483.2.1.1.2.32.14 |
tnSysLicenseMgrNextRefreshTimeTime remaining for next refresh in seconds.ro Integer32 .1.3.6.1.4.1.7483.2.1.1.2.32.15 |
tnLicenseObjs OBJECT IDENTIFIER .1.3.6.1.4.1.7483.2.1.1.2.33 |
tnLicenseEntityTable. SEQUENCE OF TnLicenseEntityEntry .1.3.6.1.4.1.7483.2.1.1.2.33.1 |
tnLicenseEntityEntry. TnLicenseEntityEntry .1.3.6.1.4.1.7483.2.1.1.2.33.1.1 |
tnLicenseEntity. Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.33.1.1.1 |
tnLicenseEntityRefreshSet.rw TnCommand (TROPIC-TC) .1.3.6.1.4.1.7483.2.1.1.2.33.1.1.2 |
tnLicenseEntityNumberInUseNumber in Use.ro Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.33.1.1.3 |
tnLicenseEntityNumberExceedAvailNumber Exceeding available.ro Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.33.1.1.4 |
tnLicenseEntityEntitlementNeededEntitlement needed by NE.ro Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.33.1.1.5 |
tnLicenseEntitlementTable. SEQUENCE OF TnLicenseEntitlementEntry .1.3.6.1.4.1.7483.2.1.1.2.33.2 |
tnLicenseEntitlementEntry. TnLicenseEntitlementEntry .1.3.6.1.4.1.7483.2.1.1.2.33.2.1 |
tnLicenseEntitlementCategoryID. Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.33.2.1.1 |
tnLicenseEntitlementEntries. Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.33.2.1.2 |
tnLicenseEntitlementDetailsThe format will be cardName_LineRate_RequestedCount_MissingCount.ro SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.33.2.1.3 |
tnSysKeyStore OBJECT IDENTIFIER .1.3.6.1.4.1.7483.2.1.1.2.34 |
tnSysKeyStoreServiceTableKeyStore Service Management. SEQUENCE OF TnSysKeyStoreServiceEntry .1.3.6.1.4.1.7483.2.1.1.2.34.1 |
tnSysKeyStoreServiceEntry. TnSysKeyStoreServiceEntry .1.3.6.1.4.1.7483.2.1.1.2.34.1.1 |
tnSysKeyStoreNameIndexKeyStore name. Enumeration .1.3.6.1.4.1.7483.2.1.1.2.34.1.1.1 |
tnSysKeyStoreTypeIndexKeyStore type. Enumeration .1.3.6.1.4.1.7483.2.1.1.2.34.1.1.2 |
tnSysKeyStoreTransServerCommandnoCmd - No operation upload - Upload file to remote server download - Only download, not install. install - Install the former downloaded restoreToDefault - Clear former intalled and install - to default downloadThenInstall - Download then auto-install clear - Removes all items installed.rw Enumeration .1.3.6.1.4.1.7483.2.1.1.2.34.1.1.3 |
tnSysKeyStoreTransServerProtocolKeyStore transfer server protocol: invalid - Not configed yet https - Use https protocol sftp - Use sftp protocol.rw Enumeration .1.3.6.1.4.1.7483.2.1.1.2.34.1.1.4 |
tnSysKeyStoreTransServerHostDomain or ip address of URI. https used only.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.34.1.1.5 |
tnSysKeyStoreTransServerPortPort of URI. https used only.rw Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.34.1.1.6 |
tnSysKeyStoreTransServerLocationFor https: location of URI; for others: path on server.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.34.1.1.7 |
tnSysKeyStoreTransServerUserIdUsername for authentication.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.34.1.1.8 |
tnSysKeyStoreTransServerPasswordPassword for authentication.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.34.1.1.9 |
tnSysKeyStoreTransServerInetAddressType.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.7483.2.1.1.2.34.1.1.10 |
tnSysKeyStoreTransServerInetAddress.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.7483.2.1.1.2.34.1.1.11 |
tnSysKeyStoreServiceStatusLast operation status: none - No command installed - Installed successfully downloaded - Downloaded successfully in-progress - Processing and need to wait transferfail - File transfer fail formaterror - File format error.ro Enumeration .1.3.6.1.4.1.7483.2.1.1.2.34.1.1.12 |
tnSysKeyStoreServerLastTransferTimeThe last transfer (download/upload) time.ro SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.34.1.1.13 |
tnSysKeyStoreTransServerURIURI.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.34.1.1.14 |
tnSysKeyStoreCertInfoTableKeyStore Certificate Information. SEQUENCE OF TnSysKeyStoreCertInfoEntry .1.3.6.1.4.1.7483.2.1.1.2.34.2 |
tnSysKeyStoreCertInfoEntry. TnSysKeyStoreCertInfoEntry .1.3.6.1.4.1.7483.2.1.1.2.34.2.1 |
tnSysKeyStoreCertRepositoryIndexKeyStore certificate repository. Enumeration .1.3.6.1.4.1.7483.2.1.1.2.34.2.1.1 |
tnSysKeyStoreCertIndex. Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.34.2.1.2 |
tnSysKeyStoreCertVersionCertificate version.ro SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.34.2.1.3 |
tnSysKeyStoreCertSerialNumberCertificate serial number.ro SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.34.2.1.4 |
tnSysKeyStoreCertSignatureAlgorithmCertificate signature algorithm.ro SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.34.2.1.5 |
tnSysKeyStoreCertIssuerCertificate issuer.ro SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.34.2.1.6 |
tnSysKeyStoreCertValidityCertificate validity.ro SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.34.2.1.7 |
tnSysKeyStoreCertSubjectCertificate subject.ro SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.34.2.1.8 |
tnSysKeyStoreCertSubjectPublicKeyInfoCertificate subject publicKey info.ro SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.34.2.1.9 |
tnSysKeyStoreCertKeyUsageCertificate key usage.ro SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.34.2.1.10 |
tnSysKeyStoreCertSubjectAlternativeNameCertificate subject alternative name.ro SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.34.2.1.11 |
tnSysKeyStoreCertExtendedKeyUsageCertificate extended key usage.ro SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.34.2.1.12 |
tnSysKeyStoreCertBasicConstraintsCertificate basic constraints.ro SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.34.2.1.13 |
tnSysKeyStoreCertSHA256FingerprintCertificate SHA256 Fingerprint.ro SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.34.2.1.14 |
tnSysBgp OBJECT IDENTIFIER .1.3.6.1.4.1.7483.2.1.1.2.35 |
tnSysBgpPeerTable. SEQUENCE OF TnSysBgpPeerEntry .1.3.6.1.4.1.7483.2.1.1.2.35.1 |
tnSysBgpPeerEntry. TnSysBgpPeerEntry .1.3.6.1.4.1.7483.2.1.1.2.35.1.1 |
tnSysBgpPeerIndex. Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.35.1.1.1 |
tnSysBgpPeerRowStatus.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.7483.2.1.1.2.35.1.1.2 |
tnSysBgpPeerInetAddressTypeThe value specifies the type of Internet address stored in tnSysBgpPeerInetAddress.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.7483.2.1.1.2.35.1.1.3 |
tnSysBgpPeerIpIP address.rw IpAddress .1.3.6.1.4.1.7483.2.1.1.2.35.1.1.4 |
tnSysBgpPeerInetAddressIndicates the IPv6 address.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.7483.2.1.1.2.35.1.1.5 |
tnSysBgpPeerRemoteASN.rw Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.35.1.1.6 |
tnSysBgpPeerSecurityKey.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.35.1.1.7 |
tnSysBgpPeerRouterIdIP address.ro IpAddress .1.3.6.1.4.1.7483.2.1.1.2.35.1.1.8 |
tnSysBgpPeerStatus.ro Enumeration .1.3.6.1.4.1.7483.2.1.1.2.35.1.1.9 |
tnSysBgpMaxPrefixIpv4Limit.rw Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.35.1.1.10 |
tnSysBgpMaxPrefixIpv4Threshold.rw Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.35.1.1.11 |
tnSysBgpMaxPrefixIpv4Action.rw NokiaSysBgpMaxPrefixAction .1.3.6.1.4.1.7483.2.1.1.2.35.1.1.12 |
tnSysBgpMaxPrefixIpv6Limit.rw Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.35.1.1.13 |
tnSysBgpMaxPrefixIpv6Threshold.rw Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.35.1.1.14 |
tnSysBgpMaxPrefixIpv6Action.rw NokiaSysBgpMaxPrefixAction .1.3.6.1.4.1.7483.2.1.1.2.35.1.1.15 |
tnSysBgpStatsIpv4PrefixInCount.ro Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.35.1.1.16 |
tnSysBgpStatsIpv6PrefixInCount.ro Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.35.1.1.17 |
tnSysBgpStatsIpv4PrefixOutCount.ro Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.35.1.1.18 |
tnSysBgpStatsIpv6PrefixOutCount.ro Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.35.1.1.19 |
tnSysBgpPeerStatsInetAddressTypeThe value specifies the type of Internet address stored in tnSysBgpPeerStatsInetAddress.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.7483.2.1.1.2.35.1.1.20 |
tnSysBgpPeerStatsIpIP address.rw IpAddress .1.3.6.1.4.1.7483.2.1.1.2.35.1.1.21 |
tnSysBgpPeerStatsInetAddressIndicates the IPv6 address.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.7483.2.1.1.2.35.1.1.22 |
tnSysDiscoverMe OBJECT IDENTIFIER .1.3.6.1.4.1.7483.2.1.1.2.36 |
tnSysDiscoverMeTrapsEnable or disable the sending of 'discover me' traps by the system.rw TmnxEnabledDisabled (TN-TC-MIB) .1.3.6.1.4.1.7483.2.1.1.2.36.1 |
tnSyslogServer OBJECT IDENTIFIER .1.3.6.1.4.1.7483.2.1.1.2.37 |
tnSyslogServerTable. SEQUENCE OF TnSyslogServerEntry .1.3.6.1.4.1.7483.2.1.1.2.37.1 |
tnSyslogServerEntry. TnSyslogServerEntry .1.3.6.1.4.1.7483.2.1.1.2.37.1.1 |
tnSyslogServerIndex. Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.37.1.1.1 |
tnSyslogServerIpAddress.rw IpAddress .1.3.6.1.4.1.7483.2.1.1.2.37.1.1.2 |
tnSyslogServerPort.rw Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.37.1.1.3 |
tnSyslogServerFacility.rw Enumeration .1.3.6.1.4.1.7483.2.1.1.2.37.1.1.4 |
tnSyslogServerPriority.rw Enumeration .1.3.6.1.4.1.7483.2.1.1.2.37.1.1.5 |
tnSyslogServerEnabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.1.1.2.37.1.1.6 |
tnSyslogServerInetAddressIndicates the IPv6 address of the Syslog Server.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.7483.2.1.1.2.37.1.1.7 |
tnSyslogServerInetAddressTypeThe value specifies the type of Internet address stored in tnSyslogServerInetAddress.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.7483.2.1.1.2.37.1.1.8 |
tnSyslogServerProtocolSyslog Transmission Protocol.rw Enumeration .1.3.6.1.4.1.7483.2.1.1.2.37.1.1.9 |
tnSyslogServerTypeSyslog Server Type.rw Enumeration .1.3.6.1.4.1.7483.2.1.1.2.37.1.1.10 |
tnSyslogServerDomainSyslog Server Domain.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.7483.2.1.1.2.37.1.1.11 |
tnPctObjs OBJECT IDENTIFIER .1.3.6.1.4.1.7483.2.1.1.2.38 |
tnPctVerificationPeriod.rw Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.38.1 |
tnPctVerificationLossThresholdVerification Port to Port loss Threshold. Current configurable range:100 to 500 mB in steps of 10. -100 indicates that the threshold is not configured.rw Integer32 UNITS "mB" .1.3.6.1.4.1.7483.2.1.1.2.38.2 |
tnPctVerificationOffset.rw Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.38.3 |
tnPctVerificationStatus.ro Enumeration .1.3.6.1.4.1.7483.2.1.1.2.38.4 |
tnKeyObjs OBJECT IDENTIFIER .1.3.6.1.4.1.7483.2.1.1.2.39 |
tnHostKeyTable. SEQUENCE OF TnHostKeyEntry .1.3.6.1.4.1.7483.2.1.1.2.39.1 |
tnHostKeyEntry. TnHostKeyEntry .1.3.6.1.4.1.7483.2.1.1.2.39.1.1 |
tnHostKeyModuleIDHost key string module ID. Integer32 .1.3.6.1.4.1.7483.2.1.1.2.39.1.1.1 |
tnHostKeyIndexHost key string key index. Integer32 .1.3.6.1.4.1.7483.2.1.1.2.39.1.1.2 |
tnHostKeyString1Host key string 1.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.39.1.1.3 |
tnHostKeyString2Host key string 2.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.39.1.1.4 |
tnSshPrivKeyTable. SEQUENCE OF TnSshPrivKeyEntry .1.3.6.1.4.1.7483.2.1.1.2.39.2 |
tnSshPrivKeyEntry. TnSshPrivKeyEntry .1.3.6.1.4.1.7483.2.1.1.2.39.2.1 |
tnSshPrivKeyModuleIDSsh Private key string module ID. Integer32 .1.3.6.1.4.1.7483.2.1.1.2.39.2.1.1 |
tnSshPrivKeyString1Ssh Private key string 1.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.39.2.1.2 |
tnSshPrivKeyString2Ssh Private key string 2.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.39.2.1.3 |
tnSshPrivKeyPasswordSsh Private key password.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.39.2.1.4 |
tnSysNESshKeyTable. SEQUENCE OF TnSysNESshKeyEntry .1.3.6.1.4.1.7483.2.1.1.2.39.3 |
tnSysNESshKeyEntry. TnSysNESshKeyEntry .1.3.6.1.4.1.7483.2.1.1.2.39.3.1 |
tnSysNESshKeyUserName. SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.39.3.1.1 |
tnSysNESshKeyIndex. Integer32 .1.3.6.1.4.1.7483.2.1.1.2.39.3.1.2 |
tnSysNESshKeyRowStatusThe row status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.7483.2.1.1.2.39.3.1.3 |
tnSysNESshKeyString1The SSH key string 1. Provisions the user public keys used for SSH user authentication. The number of keys configurable per user is defined by available key indices.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.39.3.1.4 |
tnSysNESshKeyString2The SSH key string 2. Provisions the user public keys used for SSH user authentication. The number of keys configurable per user is defined by available key indices.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.39.3.1.5 |
tnNESshKeyTable. SEQUENCE OF TnNESshKeyEntry .1.3.6.1.4.1.7483.2.1.1.2.39.4 |
tnNESshKeyEntry. TnNESshKeyEntry .1.3.6.1.4.1.7483.2.1.1.2.39.4.1 |
tnNESshKeyUserName. SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.39.4.1.1 |
tnNESshKeyIndex. Integer32 .1.3.6.1.4.1.7483.2.1.1.2.39.4.1.2 |
tnNESshKeyRowStatusThe row status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.7483.2.1.1.2.39.4.1.3 |
tnNESshKeyString1The SSH key string 1. Provisions the user public keys used for SSH user authentication. The number of keys configurable per user is defined by available key indices.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.39.4.1.4 |
tnNESshKeyString2The SSH key string 2. Provisions the user public keys used for SSH user authentication. The number of keys configurable per user is defined by available key indices.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.39.4.1.5 |
tnSshCiphersTable. SEQUENCE OF TnSshCiphersEntry .1.3.6.1.4.1.7483.2.1.1.2.39.5 |
tnSshCiphersEntry. TnSshCiphersEntry .1.3.6.1.4.1.7483.2.1.1.2.39.5.1 |
tnSshCiphersAlgTypeThis attribute indicates the SSH Ciphers Algorithm type Supported values: aes128-ctr - 1 aes256-ctr - 2 aes128-gcm@openssh.com - 3 aes256-gcm@openssh.com - 4. Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.39.5.1.1 |
tnSshCiphersProfileNameThis attribute indicates the SSH Ciphers ProfileName. OCTET STRING .1.3.6.1.4.1.7483.2.1.1.2.39.5.1.2 |
tnSshCiphersEnabledThis attribute indicates whether the SSH Ciphers algorithm setting is enabled/disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.1.1.2.39.5.1.3 |
tnSshHostKeyTable. SEQUENCE OF TnSshHostKeyEntry .1.3.6.1.4.1.7483.2.1.1.2.39.6 |
tnSshHostKeyEntry. TnSshHostKeyEntry .1.3.6.1.4.1.7483.2.1.1.2.39.6.1 |
tnSshHostKeyAlgTypeThis attribute indicates the SSH HostKey Algorithm type Supported values: ssh-rsa - 1 rsa-sha2-256 - 2 rsa-sha2-512 - 3 ecdsa-sha2-nistp256 - 4 ecdsa-sha2-nistp384 - 5 ecdsa-sha2-nistp521 - 6 ssh-ed25519 - 7. Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.39.6.1.1 |
tnSshHostKeyProfileNameThis attribute indicates the SSH HostKey Profilename. OCTET STRING .1.3.6.1.4.1.7483.2.1.1.2.39.6.1.2 |
tnSshHostKeyEnabledThis attribute indicates whether the SSH HostKey algorithm setting is enabled/disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.1.1.2.39.6.1.3 |
tnSshMacsTable. SEQUENCE OF TnSshMacsEntry .1.3.6.1.4.1.7483.2.1.1.2.39.7 |
tnSshMacsEntry. TnSshMacsEntry .1.3.6.1.4.1.7483.2.1.1.2.39.7.1 |
tnSshMacsAlgTypeThis attribute indicates the SSH Macs Algorithm type Supported values: hmac-sha1 - 1 hmac-sha2-256 - 2 hmac-sha2-512 - 3. Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.39.7.1.1 |
tnSshMacsProfileNameThis attribute indicates the SSH Macs Profilename. OCTET STRING .1.3.6.1.4.1.7483.2.1.1.2.39.7.1.2 |
tnSshMacsEnabledThis attribute indicates whether the SSH Macs algorithm setting is enabled/disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.1.1.2.39.7.1.3 |
tnSshKexTable. SEQUENCE OF TnSshKexEntry .1.3.6.1.4.1.7483.2.1.1.2.39.8 |
tnSshKexEntry. TnSshKexEntry .1.3.6.1.4.1.7483.2.1.1.2.39.8.1 |
tnSshKexAlgTypeThis attribute indicates the SSH Kex Algorithm type Supported values: diffie-hellman-group14-sha1 - 1 diffie-hellman-group14-sha256 - 2 diffie-hellman-group16-sha512 - 3 diffie-hellman-group18-sha512 - 4 ecdh-sha2-nistp256 - 5 ecdh-sha2-nistp384 - 6 ecdh-sha2-nistp521 - 7 curve25519-sha256 - 8 curve25519_sha256_libssh - 9. Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.39.8.1.1 |
tnSshKexProfileNameThis attribute indicates the SSH Kex Profile name. OCTET STRING .1.3.6.1.4.1.7483.2.1.1.2.39.8.1.2 |
tnSshKexEnabledThis attribute indicates whether the SSH Kex algorithm setting is enabled/disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.1.1.2.39.8.1.3 |
tnSshPubKeyTable. SEQUENCE OF TnSshPubKeyEntry .1.3.6.1.4.1.7483.2.1.1.2.39.9 |
tnSshPubKeyEntry. TnSshPubKeyEntry .1.3.6.1.4.1.7483.2.1.1.2.39.9.1 |
tnSshPubKeyAlgTypeThis attribute indicates the SSH PubKey Algorithm type Supported values: ssh-rsa - 1 rsa-sha2-256 - 2 rsa-sha2-512 - 3 ecdsa-sha2-nistp256 - 4 ecdsa-sha2-nistp384 - 5 ecdsa-sha2-nistp521 - 6. Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.39.9.1.1 |
tnSshPubKeyProfileNameThis attribute indicates the SSH PubKey Profile name. OCTET STRING .1.3.6.1.4.1.7483.2.1.1.2.39.9.1.2 |
tnSshPubKeyEnabledThis attribute indicates whether the SSH PubKey algorithm setting is enabled/disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.1.1.2.39.9.1.3 |
tnTlsProfileTable. SEQUENCE OF TnTlsProfileEntry .1.3.6.1.4.1.7483.2.1.1.2.39.10 |
tnTlsProfileEntry. TnTlsProfileEntry .1.3.6.1.4.1.7483.2.1.1.2.39.10.1 |
tnTlsProfileNameThis attribute indicates the TLS ProfileName and specifies an TLS profile which will be applied to TLS clients and servers or applications which uses this profile or have this profile assigned respectively. OCTET STRING .1.3.6.1.4.1.7483.2.1.1.2.39.10.1.1 |
tnTlsProfileMinVersionConfigures the minimum TLS version supported by the TLS clients and servers. The version specified must be lower or equal to the maximum supported version.rw Integer32 .1.3.6.1.4.1.7483.2.1.1.2.39.10.1.2 |
tnTlsProfileMaxVersionConfigures the maximum TLS version supported by the TLS clients and servers. The version specified must be higher or equal to the minimum supported version.rw Integer32 .1.3.6.1.4.1.7483.2.1.1.2.39.10.1.3 |
tnTlsProfileMutualAuthEnables or Disables the mutual authentication If mutual authentication is enabled, a client certificate will be requested by an TLS server. A client of server implementation verifies the received certificates and its revocation status. If the verification fail, then a TLS connection will be cancelled.rw AluWdmEnabledDisabled (TROPIC-TC) .1.3.6.1.4.1.7483.2.1.1.2.39.10.1.4 |
tnTlsProfileDescription.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.39.10.1.5 |
tnSanListTable. SEQUENCE OF TnSanListEntry .1.3.6.1.4.1.7483.2.1.1.2.39.11 |
tnSanListEntry. TnSanListEntry .1.3.6.1.4.1.7483.2.1.1.2.39.11.1 |
tnSanListName. OCTET STRING .1.3.6.1.4.1.7483.2.1.1.2.39.11.1.1 |
tnSanListType. Enumeration .1.3.6.1.4.1.7483.2.1.1.2.39.11.1.2 |
tnSanListIndex. OCTET STRING .1.3.6.1.4.1.7483.2.1.1.2.39.11.1.3 |
tnSanListRowStatusThe row status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.7483.2.1.1.2.39.11.1.4 |
tnCsrSanListTable. SEQUENCE OF TnCsrSanListEntry .1.3.6.1.4.1.7483.2.1.1.2.39.12 |
tnCsrSanListEntry. TnCsrSanListEntry .1.3.6.1.4.1.7483.2.1.1.2.39.12.1 |
tnCsrSanListType. Enumeration .1.3.6.1.4.1.7483.2.1.1.2.39.12.1.1 |
tnCsrSanListIndex. OCTET STRING .1.3.6.1.4.1.7483.2.1.1.2.39.12.1.2 |
tnCsrSanListRowStatusThe row status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.7483.2.1.1.2.39.12.1.3 |
tnSanListAuthTable. SEQUENCE OF TnSanListAuthEntry .1.3.6.1.4.1.7483.2.1.1.2.39.13 |
tnSanListAuthEntry. TnSanListAuthEntry .1.3.6.1.4.1.7483.2.1.1.2.39.13.1 |
tnSanListAuthentication.rw AluWdmEnabledDisabled (TROPIC-TC) .1.3.6.1.4.1.7483.2.1.1.2.39.13.1.1 |
tnSanListProfileDescription.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.39.13.1.2 |
tnOcspProfileTable. SEQUENCE OF TnOcspProfileEntry .1.3.6.1.4.1.7483.2.1.1.2.39.14 |
tnOcspProfileEntry. TnOcspProfileEntry .1.3.6.1.4.1.7483.2.1.1.2.39.14.1 |
tnOcspProfileName. OCTET STRING .1.3.6.1.4.1.7483.2.1.1.2.39.14.1.1 |
tnOcspProfileRowStatusThe row status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.7483.2.1.1.2.39.14.1.2 |
tnOcspProfileRetryNumber of entries if an OCSP responder does not respond.rw Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.39.14.1.3 |
tnOcspProfileServerUrlURL of the OCSP responder.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.39.14.1.4 |
tnOcspProfileStatusEnables or disables the X.509v3 certificate revocation using the specified OCSP responder. If the service is disabled, then the revocation check will be not done.rw AluWdmEnabledDisabled (TROPIC-TC) .1.3.6.1.4.1.7483.2.1.1.2.39.14.1.5 |
tnOcspProfileTimeoutTimeout for OCSP responses.rw Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.39.14.1.6 |
tnSshProfileTable. SEQUENCE OF TnSshProfileEntry .1.3.6.1.4.1.7483.2.1.1.2.39.15 |
tnSshProfileEntry. TnSshProfileEntry .1.3.6.1.4.1.7483.2.1.1.2.39.15.1 |
tnSshProfileName. OCTET STRING .1.3.6.1.4.1.7483.2.1.1.2.39.15.1.1 |
tnSshProfileDescription.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.39.15.1.2 |
tnTransferSysLog OBJECT IDENTIFIER .1.3.6.1.4.1.7483.2.1.1.2.40 |
tnTransferSysLogCommandThis attribute indicates the transfer log Command.rw Enumeration .1.3.6.1.4.1.7483.2.1.1.2.40.1 |
tnTransferSysLogRemoteHostIpThis attribute indicates the transfer log Remote Host Ip.rw IpAddress .1.3.6.1.4.1.7483.2.1.1.2.40.2 |
tnTransferSysLogRemoteHostInetAddressTypeThe value specifies the type of Internet address stored in tnTransferSysLogRemoteHostInetAddress.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.7483.2.1.1.2.40.3 |
tnTransferSysLogRemoteHostInetAddressIndicates the IPv6 address of the log server.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.7483.2.1.1.2.40.4 |
tnTransferSysLogPortThis attributes indicates the transfer Syslog port.rw Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.40.5 |
tnTransferSysLogProtocolThis attributes indicates the transfer Syslog protocol.rw AluWdmNewTransferProtocol (TROPIC-TC) .1.3.6.1.4.1.7483.2.1.1.2.40.6 |
tnTransferSysLogUserIdThe userId used to access the RFS.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.40.7 |
tnTransferSysLogPasswordThe password used to access the RFS. When read, this attribute will return an empty string if the password has not been set and '********' if it has been set.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.40.8 |
tnTransferSysLogRemotePathThis attribute indicates the transfer Log Remote Path.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.40.9 |
tnTransferSysLogPeriodThis attribute indicates the transfer Log Period.rw Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.40.10 |
tnTransferSysLogLastFileTransferThis attribute indicates the recent file transfer.ro Enumeration .1.3.6.1.4.1.7483.2.1.1.2.40.11 |
tnTransferSysLogEnableThis attribute indicates whether the transfer Log is enabled/disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.1.1.2.40.12 |
tnSysHealthCare OBJECT IDENTIFIER .1.3.6.1.4.1.7483.2.1.1.2.41 |
tnSysHealthCareCheckCommandHealthcare check command.rw Enumeration .1.3.6.1.4.1.7483.2.1.1.2.41.1 |
tnSysHealthCareCheckShelfNumShelfNum where the healthcare check has to be initiated.rw Integer32 .1.3.6.1.4.1.7483.2.1.1.2.41.2 |
tnSysHealthCareCheckSlotNumSlotNum where the healthcare check has to be initiated.rw Integer32 .1.3.6.1.4.1.7483.2.1.1.2.41.3 |
tnSysHealthCareCheckPercentCompletedThe percent complete of the previously executed tnSysHealthCareCheckCommand operation.ro Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.41.4 |
tnSysHealthCareCheckStatusIndicates the status of the previously executed tnSysHealthCareCheckCommand operation.ro Enumeration .1.3.6.1.4.1.7483.2.1.1.2.41.5 |
tnSysHealthCareCheckResultIndicates the result of the previously executed tnSysHealthCareCheckCommand operation.ro Enumeration .1.3.6.1.4.1.7483.2.1.1.2.41.6 |
tnSysHealthCareCheckScratchDirContains the file's size in KB, its access date and the filename as 3 attributes per output line format similar to output from ls -ogth.ro SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.41.7 |
tnSysHealthCareServerIpHealthcare remote file server IP address.rw IpAddress .1.3.6.1.4.1.7483.2.1.1.2.41.8 |
tnSysHealthCareServerProtocolIndicates the healthcare server protocol.rw AluWdmNewTransferProtocol (TROPIC-TC) .1.3.6.1.4.1.7483.2.1.1.2.41.9 |
tnSysHealthCareServerInetAddressTypeSpecifies the type of Healthcare address stored in tnSysHealthCareServerInetAddress.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.7483.2.1.1.2.41.10 |
tnSysHealthCareServerInetAddressHealthcare remote file server IPv6 address.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.7483.2.1.1.2.41.11 |
tnSysHealthCareServerPortIndicates the Heathcare server port.rw Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.41.12 |
tnSysHealthCareServerUserIdThe userId used to access the Healthcare server.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.41.13 |
tnSysHealthCareServerPasswordThe password used to access the Healthcare server. When read, this attribute will return an empty string if the password has not been set and '********' if it has been set.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.41.14 |
tnSysHealthCareServerLocationFor https: location of URI; for others: path on the Healthcare server.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.41.15 |
tnSysHealthCareTransferCommandHealthcare transfer command.rw Enumeration .1.3.6.1.4.1.7483.2.1.1.2.41.16 |
tnSysHealthCareTransferPercentCompletedThe percent completion of the previously executed transfer operation.ro Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.41.17 |
tnSysHealthCareTransferStatusIndicates the status of the previously executed tnSysHealthCareTransferCommand operation.ro AluWdmTransferStatus .1.3.6.1.4.1.7483.2.1.1.2.41.18 |
tnSysHealthCareTransferLastFileIndicates the filename for the last Healthcare check result file transfer.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.7483.2.1.1.2.41.19 |
tnSysHealthCareLastOperationHealthcare last operation.ro Enumeration .1.3.6.1.4.1.7483.2.1.1.2.41.20 |
tnSysHealthCareSetCriteriaTcIdSets Criteria TcId in string format.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.41.21 |
tnSysHealthCareSetCriteriaSets one test case criteria in JSONL format.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.41.22 |
tnSysHealthCareDeleteCriteriaTcIdDeletes Criteria TcId in string format.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.41.23 |
tnSysHealthCareDeleteCriteriaDeletes one test case criteria in JSONL format.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.41.24 |
tnSysHealthCareApplyCriteriaCommandCommand to apply the preset or default criteria of all test cases.rw Enumeration .1.3.6.1.4.1.7483.2.1.1.2.41.25 |
tnSysTrapThrottling OBJECT IDENTIFIER .1.3.6.1.4.1.7483.2.1.1.2.42 |
tnSysTrapThrottlingStatusDisables or enables the trap throttling related parameters on the network element.rw AluWdmDisabledEnabled (TROPIC-TC) .1.3.6.1.4.1.7483.2.1.1.2.42.1 |
tnSysTrapThrottlingThreshold1Configures the maximum number of category1 traps that can be processed as part of the trap-throttling functionality (if enabled) on the network element. Current Range: 1 to 150.rw Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.42.2 |
tnSysTrapThrottlingThreshold2Configures the maximum number of category2 traps that can be processed as part of the trap-throttling functionality (if enabled) on the network element. Current Range: 1 to 150.rw Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.42.3 |
tnSysTrapThrottlingThreshold3Configures the maximum number of category3 traps that can be processed as part of the trap-throttling functionality (if enabled) on the network element. Current Range: 1 to 150.rw Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.42.4 |
tnSysTrapThrottlingTimeOverThresholdConfigures the number of consecutive seconds for which traps are above the threshold (sum of the set threshold1, threshold2, and threshold3 values), after which the network element enters the trap throttling state. Current Range: 1 to 600.rw Unsigned32 UNITS "seconds" .1.3.6.1.4.1.7483.2.1.1.2.42.5 |
tnSysTrapThrottlingTimeUnderThresholdConfigures the number of consecutive seconds for which traps are below the threshold (sum of the set threshold1, threshold2, and threshold3 values), after which the trap throttling state is exited on the network element. Current Range: 1 to 600.rw Unsigned32 UNITS "seconds" .1.3.6.1.4.1.7483.2.1.1.2.42.6 |
tnSysTrapThrottlingStateIndicates if the network element is in trap throttling state.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.1.1.2.42.7 |
tnSysNmsObjs OBJECT IDENTIFIER .1.3.6.1.4.1.7483.2.1.1.2.43 |
tnSysNmsIpListTable. SEQUENCE OF TnSysNmsIpListEntry .1.3.6.1.4.1.7483.2.1.1.2.43.1 |
tnSysNmsIpListEntry. TnSysNmsIpListEntry .1.3.6.1.4.1.7483.2.1.1.2.43.1.1 |
tnSysNmsIpListIndex. OCTET STRING .1.3.6.1.4.1.7483.2.1.1.2.43.1.1.1 |
tnSysNmsIpListRowStatusThe row status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.7483.2.1.1.2.43.1.1.2 |
tnSysNmsIpListIpAddress.rw IpAddress .1.3.6.1.4.1.7483.2.1.1.2.43.1.1.3 |
tnSysNmsIpListInetAddressIndicates the IPv6 address of the Syslog Server.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.7483.2.1.1.2.43.1.1.4 |
tnSysNmsIpListInetAddressTypeThe value specifies the type of Internet address stored in tnSysNmsIpListInetAddress.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.7483.2.1.1.2.43.1.1.5 |
tnSysDnsServer OBJECT IDENTIFIER .1.3.6.1.4.1.7483.2.1.1.2.44 |
tnSysDnsServerTable. SEQUENCE OF TnSysDnsServerEntry .1.3.6.1.4.1.7483.2.1.1.2.44.1 |
tnSysDnsServerEntry. TnSysDnsServerEntry .1.3.6.1.4.1.7483.2.1.1.2.44.1.1 |
tnSysDnsServerIndex. Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.44.1.1.1 |
tnSysDnsServerIpAddress.rw IpAddress .1.3.6.1.4.1.7483.2.1.1.2.44.1.1.2 |
tnSysDnsServerInetAddressIndicates the IPv6 address of the Syslog Server.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.7483.2.1.1.2.44.1.1.3 |
tnSysDnsServerInetAddressTypeThe value specifies the type of Internet address stored in tnSysDnsServerInetAddress.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.7483.2.1.1.2.44.1.1.4 |
tnTransferPMDiscovery OBJECT IDENTIFIER .1.3.6.1.4.1.7483.2.1.1.2.45 |
tnTransferPMDiscoveryTable. SEQUENCE OF TnTransferPMDiscoveryEntry .1.3.6.1.4.1.7483.2.1.1.2.45.1 |
tnTransferPMDiscoveryEntry. TnTransferPMDiscoveryEntry .1.3.6.1.4.1.7483.2.1.1.2.45.1.1 |
tnTransferPMDiscoveryIndexUnique identifier associated with this tnTransferPMDiscoveryEntry. SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.7483.2.1.1.2.45.1.1.1 |
tnTransferPMDiscoveryRowStatusCurrently all entries have a row status of active. Sets are permitted with values of createAndGo and destroy, exclusively.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.7483.2.1.1.2.45.1.1.2 |
tnTransferPMDiscoveryFilenameThis attribute indicates remote destination file path.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.45.1.1.3 |
tnTransferPMDiscoveryControlControls the Discovery, i.e., starts after the next bin rolled over trap is generated or aborts.rw Enumeration .1.3.6.1.4.1.7483.2.1.1.2.45.1.1.4 |
tnTransferPMDiscoveryStatusThis attribute indicates the status of the most recent file transfer.ro Enumeration .1.3.6.1.4.1.7483.2.1.1.2.45.1.1.5 |
tnTransferPMDiscoveryErrorCodeThis attribute indicates the error code of the most recent file transfer.ro Enumeration .1.3.6.1.4.1.7483.2.1.1.2.45.1.1.6 |
tnTransferPMDiscoveryServerProtocolThis attributes indicates the server protocol.rw AluWdmNewTransferProtocol (TROPIC-TC) .1.3.6.1.4.1.7483.2.1.1.2.45.1.1.7 |
tnTransferPMDiscoveryServerIpThis attributes indicates the server IPv4 address.rw IpAddress .1.3.6.1.4.1.7483.2.1.1.2.45.1.1.8 |
tnTransferPMDiscoveryServerUserIdThis attribute indicates the userId used to access the server.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.45.1.1.9 |
tnTransferPMDiscoveryServerPasswordThis attribute indicates the password used to access the server. When read, this attribute will return an empty string if the password has not been set and '********' if it has been set.rw SnmpAdminString .1.3.6.1.4.1.7483.2.1.1.2.45.1.1.10 |
tnTransferPMDiscoveryServerInetAddressTypeThe value specifies the type of Internet address stored in tnTransferPMDiscoveryServerInetAddress.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.7483.2.1.1.2.45.1.1.11 |
tnTransferPMDiscoveryServerInetAddressThis attribute indicates the IPv6 address of the server.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.7483.2.1.1.2.45.1.1.12 |
tnTransferPMDiscoveryPortThis attributes indicates the server port.rw Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.45.1.1.13 |
tnTransferPMDiscoveryPrevious15minBinFilesTransferThis attribute indicates the number of previous 15 min bin files that needs to be transferred in the range of 0 to 8.rw Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.45.1.1.14 |
tnTransferPMDiscoveryPrevious1dayBinFilesTransferThis attribute indicates the number of previous 1 day bin files that needs to be transferred in the range of 0 to 7.rw Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.45.1.1.15 |
tnTransferPMDiscoveryTransferTimeOffsetThis attribute indicates the file transfer time offset in the range 0 to 600 seconds.rw Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.45.1.1.16 |
tnTransferPMDiscovery15minBinFileTransferCountThis attribute indicates the recent number of 15 min bin files transferred.ro Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.45.1.1.17 |
tnTransferPMDiscovery1dayBinFileTransferCountThis attribute indicates the recent number of 1 day bin files transferred.ro Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.45.1.1.18 |
tnTransferPMDiscovery15minBinFileTransferFailureCountThis attribute indicates the number of 15 min bin files transferred failure count.ro Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.45.1.1.19 |
tnTransferPMDiscovery1dayBinFileTransferFailureCountThis attribute indicates the number of 1 day bin files transferred failure count.ro Unsigned32 .1.3.6.1.4.1.7483.2.1.1.2.45.1.1.20 |