TN-EVC-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for TN-EVC-MIB.
TBD
Main OID:
tnEvcMib.1.3.6.1.4.1.7483.6.106
180
Objects
Active
Status
9
Dependencies
Imported Objects
Objects
180 total| Object Name |
|---|
tnEvcMibTBD MODULE-IDENTITY .1.3.6.1.4.1.7483.6.106 |
tnEvcObjects OBJECT IDENTIFIER .1.3.6.1.4.1.7483.6.106.1 |
tnEvcCfgMgmtGroup OBJECT IDENTIFIER .1.3.6.1.4.1.7483.6.106.1.1 |
tnEvcPortTableThis table displays and sets current EVC port configurations.
This table has a sparse depedent relationship on the ifTable,
containing a row for each ifEntry having an ifType of
'ethernetCsmacd' capable of supporting Ethernet services. SEQUENCE OF TnEvcPortEntry .1.3.6.1.4.1.7483.6.106.1.1.1 |
tnEvcPortEntryThis entry represents an EVC port configuration. TnEvcPortEntry .1.3.6.1.4.1.7483.6.106.1.1.1.1 |
tnEvcPortDEIModeThe DEI mode for an NNI port determines whether frames transmitted on the port will have the DEI field
in the outer tag marked based on the colour of the frame. The allowed values are:
'coloured':
The DEI is 1 for yellow frames and 0 for green frames.
'fixed':
The DEI value is determined by ECE rules.rw Enumeration .1.3.6.1.4.1.7483.6.106.1.1.1.1.1 |
tnEvcPortTagModeThe inner tag type is used to determine whether an inner tag is inserted in frames
forwarded to NNI ports. The possible values are:
'inner':
An inner tag is not inserted.
'outer':
An inner C-tag is inserted.rw Enumeration .1.3.6.1.4.1.7483.6.106.1.1.1.1.2 |
tnEvcPortAddressModeThe IP/MAC address mode specifying whether the EVC classification must be based on
source (SMAC/SIP) or destination (DMAC/DIP) addresses. The allowed values are:
'source':
Enable SMAC/SIP matching.
'destination':
Enable DMAC/DIP matching.rw Enumeration .1.3.6.1.4.1.7483.6.106.1.1.1.1.3 |
tnEvcTableThis table contains the configuration of EVC(Ethernet Virtual Circuit). SEQUENCE OF TnEvcEntry .1.3.6.1.4.1.7483.6.106.1.1.2 |
tnEvcEntryThis entry represents an EVC.
Each entry in this table represents an EVC and can be created or deleted
by the management system. TnEvcEntry .1.3.6.1.4.1.7483.6.106.1.1.2.1 |
tnEvcIndexThe identifier of the EVC. INTEGER .1.3.6.1.4.1.7483.6.106.1.1.2.1.1 |
tnEvcNNIPortlistThe list of Network to Network Interfaces for the EVC.rw PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.7483.6.106.1.1.2.1.2 |
tnEvcVidThe VLAN ID in the PB network.
It may be inserted in a C-tag, S-tag or S-custom tag
depending on the NNI port VLAN configuration.
The allowed range is from 1 through 4094rw VlanIdOrAny -- changed from VlanId to VlanIdOrAny by Jing .1.3.6.1.4.1.7483.6.106.1.1.2.1.3 |
tnEvcIVidThe Internal/classified VLAN ID in the PB network.
The allowed range is from 1 through 4094rw VlanIdOrAny -- changed from VlanId to VlanIdOrAny by Jing .1.3.6.1.4.1.7483.6.106.1.1.2.1.4 |
tnEvcLearningThe learning mode for the EVC controls whether source MAC addresses are learned for frames matching the EVC.
Learning may be disabled if the EVC only includes two UNI/NNI ports. The allowed values are:
Enabled: Learning is enabled (MAC addresses are learned).
Disabled: Learning is disabled (MAC addresses are not learned).rw Enumeration .1.3.6.1.4.1.7483.6.106.1.1.2.1.5 |
tnEvcInnerTagTypeThe inner tag type is used to determine whether an inner tag is inserted in frames forwarded to NNI ports.
The allowed values are:
None: An inner tag is not inserted.
cTag: An inner C-tag is inserted.
sTag: An inner S-tag is inserted.
sCustomTag: An inner tag is inserted and the tag type is determined by the VLAN port configuration of the NNI.rw Enumeration .1.3.6.1.4.1.7483.6.106.1.1.2.1.6 |
tnEvcInnerVidModeThe inner VID Mode affects the VID in the inner and outer tag. The allowed values are:
normal: The VID of the two outer tags aren't swapped.
tunnel: The VID of the two outer tags are swapped,
so that the VID of the outer tag is taken from the Inner Tag configuration
and the VID of the inner tag is the EVC VID.
In this mode, the NNI ports are normally configured to do EVC classification based on the inner tag.rw Enumeration .1.3.6.1.4.1.7483.6.106.1.1.2.1.7 |
tnEvcInnerVidThe Inner tag VLAN ID. The allowed range is from 0 through 4094.rw VlanIdOrAnyOrNone -- changed from:VlanId to VlanIdOrAny by Jing .1.3.6.1.4.1.7483.6.106.1.1.2.1.8 |
tnEvcInnerPCPDEIPreservationThe inner tag PCP and DEI preservation. The allowed values are:
Preserved: The inner tag PCP and DEI is preserved.
Fixed: The inner tag PCP and DEI is fixed.rw Enumeration .1.3.6.1.4.1.7483.6.106.1.1.2.1.9 |
tnEvcInnerPCPThe inner tag PCP value. The allowed range is from 0 through 7.rw INTEGER .1.3.6.1.4.1.7483.6.106.1.1.2.1.10 |
tnEvcInnerDEIThe inner tag DEI value. The allowed value is 0 or 1.rw INTEGER .1.3.6.1.4.1.7483.6.106.1.1.2.1.11 |
tnEvcOuterVidThe Outer tag VLAN ID. The allowed range is from 0 through 4094.rw VlanIdOrAnyOrNone -- changed from:VlanId to VlanIdOrAny by Jing .1.3.6.1.4.1.7483.6.106.1.1.2.1.12 |
tnEvcStatusThe status of this conceptual row entry of EVC table. This object isused to manage the
creation and deletion of conceptual rows.
The status column has six defined values:
- 'active', which indicates that the conceptual row is
available for use by the managed device;
- 'notInService', which indicates that the conceptual
row exists in the agent, but is unavailable for use by
the managed device (see NOTE below);
- 'notReady', which indicates that the conceptual row
exists in the agent, but is missing information
necessary in order to be available for use by the
managed device;
- 'createAndGo', which is supplied by a management
station wishing to create a new instance of a
conceptual row and to have its status automatically set
to active, making it available for use by the managed
device;
- 'createAndWait', which is supplied by a management
station wishing to create a new instance of a
conceptual row (but not make it available for use by
the managed device); and,
- 'destroy', which is supplied by a management station
wishing to delete all of the instances associated with
an existing conceptual row.
For a detailed description of this object, please refer to
SNMPv2-TC MIB.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.7483.6.106.1.1.2.1.13 |
tnEvcPolicerIDThe ingress bandwidth profile mode for the EVC. The possible values are:
Specific: The allowed range is from 1 through 128.
Discard: All received frames are discarded for the EVC. The value is 4094.
None: None bandwidth profile for the EVC. The value is 4095.rw INTEGER .1.3.6.1.4.1.7483.6.106.1.1.2.1.14 |
tnEvcNameEVC Administrative Name.rw OCTET STRING .1.3.6.1.4.1.7483.6.106.1.1.2.1.15 |
tnEvcEceTableThis table contains the configuration of EVC control entry. SEQUENCE OF TnEvcEceEntry .1.3.6.1.4.1.7483.6.106.1.1.3 |
tnEvcEceEntryThis entry represents an ECE.
The system automatically creates an entry when the system or
the EMS/NMS creates a row in the cevcECETable. Likewise, the
system automatically destroys an entry when the system or
the EMS/NMS destroys the corresponding row in the cevcECETable. TnEvcEceEntry .1.3.6.1.4.1.7483.6.106.1.1.3.1 |
tnEvcEceIdThe identifier of the ECE. INTEGER .1.3.6.1.4.1.7483.6.106.1.1.3.1.1 |
tnEvcEceNextEceIdSpecify the created ECE is placed before which ECE.rw INTEGER .1.3.6.1.4.1.7483.6.106.1.1.3.1.2 |
tnEvcEceUNIPortlistThe list of User to Network Interfaces for the ECE.rw PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.7483.6.106.1.1.3.1.3 |
tnEvcEceTagTypeThe tag type for the ECE. The possible values are:
tagged: The ECE will match tagged frames only.
untagged: The ECE will match untagged frames only.
any: The ECE will match both tagged and untagged frames.rw Enumeration .1.3.6.1.4.1.7483.6.106.1.1.3.1.4 |
tnEvcEceTagVIDFilterTypeThe VLAN ID filter for matching the ECE. It only significant if tag type 'Tagged'
is selected. The possible values are:
any: No VLAN ID filter is specified. (VLAN ID filter status is 'don't-care'.)
specific: If you want to filter a specific VLAN ID value with this ECE, choose this
value. A field for entering a specific value appears.
range: If you want to filter a specific VLAN ID range filter with this ECE, choose
this value. A field for entering a range appears.rw Enumeration .1.3.6.1.4.1.7483.6.106.1.1.3.1.5 |
tnEvcEceTagVIDFilterValWhen 'Specific' is selected for the VLAN ID filter, you can enter a specific value.
The allowed value is from 0 through 4094.rw VlanIdOrAnyOrNone -- changed from VlanIdOrNone by Jing .1.3.6.1.4.1.7483.6.106.1.1.3.1.6 |
tnEvcEceTagVIDFilterStartWhen 'Range' is selected for the VLAN ID filter, you can enter a specific range.
The allowed range start is from 0 through 4094.rw VlanIdOrAnyOrNone -- changed from VlanIdOrNone by Jing .1.3.6.1.4.1.7483.6.106.1.1.3.1.7 |
tnEvcEceTagVIDFilterEndWhen 'Range' is selected for the VLAN ID filter, you can enter a specific range.
The allowed range end is from 0 through 4094.rw VlanIdOrAnyOrNone -- changed from VlanIdOrNone by Jing .1.3.6.1.4.1.7483.6.106.1.1.3.1.8 |
tnEvcEceTagPCPThe PCP value for mataching the ECE. It only significant if tag type 'Tagged' is selected.
The possible values are:
any: The ECE will match any PCP value(all bits will be set to 1).
specific: each bit matchs a specific PCP of ECE(from bit0 to bit7).
range: The ECE will match PCP values in the selected range, valid range bit0-bit1, bit2-bit3,
bit4-bit5, bit6-bit7, bit0-bit3 or bit4-bit7.rw Bits .1.3.6.1.4.1.7483.6.106.1.1.3.1.9 |
tnEvcEceTagDEIThe DEI value for mataching the ECE. It only significant if tag type 'Tagged' is selected.
The allowed value is: 0, 1 or Any.rw Enumeration .1.3.6.1.4.1.7483.6.106.1.1.3.1.10 |
tnEvcEceTagFrameTypeThe frame type for the ECE. The possible values are:
any: The ECE will match any frame type.
etype: The ECE will match Ethernet Type frames only.
llc: The ECE will match LLC frames only.
snap: The ECE will match SNAP frames only.
ipv4: The ECE will match IPv4 frames only.
ipv6: The ECE will match IPv6 frames only.
l2cp: The ECE will match L2CP frames only.rw Enumeration .1.3.6.1.4.1.7483.6.106.1.1.3.1.11 |
tnEvcEceProtoTypeThe IP protocol for matching the ECE. The possible values are:
any: No protocol filter is specified. (Protocol filter status is 'don't-care'.)
udp: Specify the UDP for matching the ECE.
tcp: Specify the TCP for matching the ECE.
other: If you want to filter a specific protocol value with this ECE,
choose this value. A field for entering a specific value appears.rw Enumeration .1.3.6.1.4.1.7483.6.106.1.1.3.1.12 |
tnEvcEceProtoValWhen 'Specific' is selected for the protocol filter, you can enter a specific value.
The allowed value is from 0 through 255.rw INTEGER .1.3.6.1.4.1.7483.6.106.1.1.3.1.13 |
tnEvcEceDscpFilterTypeThe DSCP filter for matching the ECE. The possible values are:
any: No DSCP filter is specified. (DSCP filter status is 'don't-care'.)
specific: If you want to filter a specific DSCP value with this ECE, choose this value.
A field for entering a specific value appears.
range: If you want to filter a specific DSCP range filter with this ECE, choose this value.
A field for entering a range appears.rw Enumeration .1.3.6.1.4.1.7483.6.106.1.1.3.1.14 |
tnEvcEceDscpFilterValWhen 'Specific' is selected for the DSCP filter, you can enter a specific value.
The allowed value is from 0 through 63.rw INTEGER .1.3.6.1.4.1.7483.6.106.1.1.3.1.15 |
tnEvcEceDscpRangeStartWhen 'Range' is selected for the DSCP filter, you can enter a specific range.
The allowed range start is from 0 through 63.rw INTEGER .1.3.6.1.4.1.7483.6.106.1.1.3.1.16 |
tnEvcEceDscpRangeEndWhen 'Range' is selected for the DSCP filter, you can enter a specific range.
The allowed range end is from 0 through 63.rw INTEGER .1.3.6.1.4.1.7483.6.106.1.1.3.1.17 |
tnEvcEceSrcPortFilterTypeThe TCP/UDP source port for matching the ECE. It only significant if protocol
filter 'UDP' or 'TCP' is selected. The possible values are:
any: No TCP/UDP source port filter is specified. (Source port filter status is 'don't-care'.)
specific: If you want to filter a specific TCP/UDP source port No. with this ECE, choose this value.
A field for entering a specific No. appears.
range: If you want to filter a specific TCP/UDP source port range filter with this ECE, choose
this value. A field for entering a range appears.rw Enumeration .1.3.6.1.4.1.7483.6.106.1.1.3.1.18 |
tnEvcEceSrcPortFilterNoWhen 'Specific' is selected for the source port filter, you can enter a specific value.
The allowed value is from 0 through 65535.rw INTEGER .1.3.6.1.4.1.7483.6.106.1.1.3.1.19 |
tnEvcEceSrcPortRangeStartWhen 'Range' is selected for the source port filter, you can enter a specific range.
The allowed range start is from 0 through 65535.rw INTEGER .1.3.6.1.4.1.7483.6.106.1.1.3.1.20 |
tnEvcEceSrcPortRangeEndWhen 'Range' is selected for the source port filter, you can enter a specific range.
The allowed range end is from 0 through 65535.rw INTEGER .1.3.6.1.4.1.7483.6.106.1.1.3.1.21 |
tnEvcEceDstPortFilterTypeThe TCP/UDP destination port for matching the ECE. It only significant if protocol
filter 'UDP' or 'TCP' is selected. The possible values are:
any: No TCP/UDP destination port filter is specified. (Source port filter status is 'don't-care'.)
specific: If you want to filter a specific TCP/UDP source port No. with this ECE, choose this value.
A field for entering a specific No. appears.
range: If you want to filter a specific TCP/UDP source port range filter with this ECE, choose
this value. A field for entering a range appears.rw Enumeration .1.3.6.1.4.1.7483.6.106.1.1.3.1.22 |
tnEvcEceDstPortFilterNoWhen 'Specific' is selected for the destination port filter, you can enter a specific value.
The allowed value is from 0 through 65535.rw INTEGER .1.3.6.1.4.1.7483.6.106.1.1.3.1.23 |
tnEvcEceDstPortRangeStartWhen 'Range' is selected for the destination port filter, you can enter a specific range.
The allowed range start is from 0 through 65535.rw INTEGER .1.3.6.1.4.1.7483.6.106.1.1.3.1.24 |
tnEvcEceDstPortRangeEndWhen 'Range' is selected for the destination port filter, you can enter a specific range.
The allowed range end is from 0 through 65535.rw INTEGER .1.3.6.1.4.1.7483.6.106.1.1.3.1.25 |
tnEvcEceIpv4DipSipFilterThe source/destination IP address for matching the ECE. It depend on by the port address mode,
when port address mode is set to 'Source' then the field is used for source address. Similarly
when port address mode is set to 'Destination' then the field is used for destination address.
The possible values are:
Any: No SIP/DIP filter is specified. (SIP/DIP filter status is 'don't-care'.)
Host: If you want to filter a specific host address with this ECE, choose this value. A field
for entering a host address appears.
Network: If you want to filter a specific network address with this ECE, choose this value.
A Two fields for entering a specific network address and network mask appears.rw Enumeration .1.3.6.1.4.1.7483.6.106.1.1.3.1.26 |
tnEvcEceIpv4DipSipAddrWhen 'Host' or 'Network' is selected for the SIP/DIP filter, you can enter a specific host or
network address.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.7483.6.106.1.1.3.1.27 |
tnEvcEceIpv4DipSipMaskWhen 'Host' or 'Network' is selected for the SIP/DIP filter, you can enter a specific network mask.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.7483.6.106.1.1.3.1.28 |
tnEvcEceIpv4FragmentThe IPv4 Fragment for matching the ECE. This involves the settings for the More Fragments (MF) bit
and the Fragment Offset (FRAG OFFSET) field for an IPv4 frame. The possible values are:
any: The ECE will match any MF bit.
fragment: IPv4 frames where the MF bit is set or the FRAG OFFSET field is greater than zero must be
able to match this entry.
nonfragment: IPv4 frames where the MF bit is set or the FRAG OFFSET field is greater than zero must
not be able to match this entry.rw Enumeration .1.3.6.1.4.1.7483.6.106.1.1.3.1.29 |
tnEvcEceIpv6DipSipFilterThe source/destination IP address for matching the ECE. It depend on by the port address mode,
when port address mode is set to 'Source' then the field is used for source address. Similarly
when port address mode is set to 'Destination' then the field is used for destination address.
The possible values are:
Any: No SIP/DIP filter is specified. (SIP/DIP filter status is 'don't-care'.)
specific: If you want to filter a specific host address with this ECE, choose this value. A field
for entering a host address appears.rw Enumeration .1.3.6.1.4.1.7483.6.106.1.1.3.1.30 |
tnEvcEceIpv6DipSipAddrWhen 'Host' or 'Network' is selected for the SIP/DIP filter, you can enter a specific host or
network address. When 'IPv6' is selected for the Frame Type, the field only supported 32 bits for
IPv6 address.rw Unsigned32 .1.3.6.1.4.1.7483.6.106.1.1.3.1.31 |
tnEvcEceIpv6DipSipMaskWhen 'Host' or 'Network' is selected for the SIP/DIP filter, you can enter a specific network mask.
When 'IPv6' is selected for the Frame Type, the field only supported 32 bits for IPv6 address mask.rw Unsigned32 .1.3.6.1.4.1.7483.6.106.1.1.3.1.32 |
tnEvcEceOuterModeThe outer tag PCP and DEI preservation for the ECE. The possible values are:
enabled: Enable outer tag for nni-to-uni direction for the ECE.
disabled: Disable outer tag for nni-to-uni direction for the ECE.rw Enumeration .1.3.6.1.4.1.7483.6.106.1.1.3.1.33 |
tnEvcEceOuterPCPDEIPreserveThe outer tag PCP and DEI preservation for the ECE. The possible values are:
preserved: The outer tag PCP and DEI is preserved.
fixed: The outer tag PCP and DEI is fixed.rw Enumeration .1.3.6.1.4.1.7483.6.106.1.1.3.1.34 |
tnEvcEceOuterPCPThe outer tag PCP value for the ECE. The allowed range is from 0 through 7.rw INTEGER .1.3.6.1.4.1.7483.6.106.1.1.3.1.35 |
tnEvcEceOuterDEIThe outer tag DEI value for the ECE. The allowed value is 0 or 1.rw INTEGER .1.3.6.1.4.1.7483.6.106.1.1.3.1.36 |
tnEvcEceActDirectionThe EVCs and ECEs are used to setup flows in one or both directions as determined by the ECE
Direction parameter. If the ECE is bidirectional, the ingress rules of the NNI ports will be
setup to match the traffic being forwarded to NNI ports. The possible values are:
both: Bidirectional.
uni2nni: Unidirectional from UNI to NNI.
nni2uni: Unidirectional from NNI to UNI.rw Enumeration .1.3.6.1.4.1.7483.6.106.1.1.3.1.37 |
tnEvcEceActEvcidFilterTypeThe outer tag PCP and DEI preservation for the ECE. The possible values are:
any: No EVC ID filter is specified. (EVC ID filter status is 'don't-care'.)
specific: If you want to filter a specific EVC ID with this ECE, choose this
value. A field for entering a specific value appears.rw Enumeration .1.3.6.1.4.1.7483.6.106.1.1.3.1.38 |
tnEvcEceActEvcidValWhen 'Specific' is selected for the VLAN ID filter, you can enter a specific
value. The allowed value is from 1 through 128.rw INTEGER .1.3.6.1.4.1.7483.6.106.1.1.3.1.39 |
tnEvcEceActTagPopCountThe ingress tag pop count for the ECE. The allowed range is from 0 through 2.rw INTEGER .1.3.6.1.4.1.7483.6.106.1.1.3.1.40 |
tnEvcEceActPolicyIdThe ACL Policy ID for the ECE for matching ACL rules. The allowed range is
from 0 through 255.rw INTEGER .1.3.6.1.4.1.7483.6.106.1.1.3.1.41 |
tnEvcEceActClassThe traffic class for the ECE. The allowed range is from 0 through 8 or disabled.rw Enumeration .1.3.6.1.4.1.7483.6.106.1.1.3.1.42 |
tnEvcEceDMacSMacFilterTypeThe source/destination MAC address for matching the ECE. It depend on by the port
address mode, when port address mode is set to 'Source' then the field is used for
source MAC address. Similarly when port address mode is set to 'Destination' then
the field is used for destination MAC address. The possible values are:
any: No SMAC/DMAC filter is specified. (SMAC/DMAC filter status is 'don't-care'.)
specific: If you want to filter a specific SMAC/DMAC value with this ECE, choose
this value. A field for entering a specific value appears.rw Enumeration .1.3.6.1.4.1.7483.6.106.1.1.3.1.43 |
tnEvcEceDMacSMacValWhen 'Specific' is selected for the SMAC/DMAC filter, you can enter a specific value.
The legal format is 'xx-xx-xx-xx-xx-xx' or 'xx.xx.xx.xx.xx.xx' or 'xxxxxxxxxxxx' (x is
a hexadecimal digit).rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.7483.6.106.1.1.3.1.44 |
tnEvcEceDMacTypeThe destination MAC address for matching the ECE. The possible values are:
any: No destination MAC address is specified.
unicast: Frame must be unicast.
multicast: Frame must be multicast.
broadcast: Frame must be broadcast.
specific: If you want to filter a specific DMAC value with this ECE, choose this value.rw Enumeration .1.3.6.1.4.1.7483.6.106.1.1.3.1.45 |
tnEvcEceConflictIndicates the hardware status of the specific ECE. The specific ECE is not applied to
the hardware due to hardware limitations.ro Enumeration .1.3.6.1.4.1.7483.6.106.1.1.3.1.46 |
tnEvcEceStatusThe status of this conceptual row entry of ECE table. This object isused to manage the
creation and deletion of conceptual rows.
The status column has six defined values:
- 'active', which indicates that the conceptual row is
available for use by the managed device;
- 'notInService', which indicates that the conceptual
row exists in the agent, but is unavailable for use by
the managed device (see NOTE below);
- 'notReady', which indicates that the conceptual row
exists in the agent, but is missing information
necessary in order to be available for use by the
managed device;
- 'createAndGo', which is supplied by a management
station wishing to create a new instance of a
conceptual row and to have its status automatically set
to active, making it available for use by the managed
device;
- 'createAndWait', which is supplied by a management
station wishing to create a new instance of a
conceptual row (but not make it available for use by
the managed device); and,
- 'destroy', which is supplied by a management station
wishing to delete all of the instances associated with
an existing conceptual row.
For a detailed description of this object, please refer to
SNMPv2-TC MIB.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.7483.6.106.1.1.3.1.47 |
tnEvcBandwidthProfilesTableThis entry displays and sets current EVC ingress bandwidth profile configurations.
These policers may be used to limit the traffic received on UNI ports. SEQUENCE OF TnEvcBandwidthProfilesEntry .1.3.6.1.4.1.7483.6.106.1.1.4 |
tnEvcBandwidthProfilesEntryThis entry represents an entry of EVC ingress bandwidth profile configuration. TnEvcBandwidthProfilesEntry .1.3.6.1.4.1.7483.6.106.1.1.4.1 |
tnEvcBandwidthProfilesIndexThe EVC bandwidth profiles policer index. INTEGER .1.3.6.1.4.1.7483.6.106.1.1.4.1.1 |
tnEvcBandwidthProfilesPolicerModeThe colour mode of the bandwidth profile. The allowed values are:
coupled: Colour-aware mode with coupling enabled.
aware: Colour-aware mode with coupling disabled.rw Enumeration .1.3.6.1.4.1.7483.6.106.1.1.4.1.2 |
tnEvcBandwidthProfilesCIRThe Committed Information Rate of the bandwidth profile. The allowed range is from 0 through 10,000,000 kilobit per second.rw INTEGER .1.3.6.1.4.1.7483.6.106.1.1.4.1.3 |
tnEvcBandwidthProfilesCBSThe Committed Burst Size of the bandwidth profile. The allowed range is from 0 through 100,000 bytes.rw INTEGER .1.3.6.1.4.1.7483.6.106.1.1.4.1.4 |
tnEvcBandwidthProfilesEIRThe Excess Information Rate of the bandwidth profile. The allowed range is from 0 through 10,000,000 kilobit per second.rw INTEGER .1.3.6.1.4.1.7483.6.106.1.1.4.1.5 |
tnEvcBandwidthProfilesEBSThe Excess Burst Size of the bandwidth profile. The allowed range is from 0 through 100,000 bytes.rw INTEGER .1.3.6.1.4.1.7483.6.106.1.1.4.1.6 |
tnEvcBandwidthProfilesStateThe administrative state of the bandwidth profile.
The allowed values are:
enabled: The bandwidth profile enabled.
disabled: The bandwidth profile is disabled.rw Enumeration .1.3.6.1.4.1.7483.6.106.1.1.4.1.7 |
tnEvcExtEceTableThis table contains the configuration of EVC control entry. SEQUENCE OF TnEvcExtEceEntry .1.3.6.1.4.1.7483.6.106.1.1.5 |
tnEvcExtEceEntryThis entry represents an ECE.
The system automatically creates an entry when the system or
the EMS/NMS creates a row in the cevcECETable. Likewise, the
system automatically destroys an entry when the system or
the EMS/NMS destroys the corresponding row in the cevcECETable. TnEvcExtEceEntry .1.3.6.1.4.1.7483.6.106.1.1.5.1 |
tnEvcEceInnerTagTypeThe Inner tag type for the ECE. The possible values are:
tagged: The ECE will match tagged frames only.
untagged: The ECE will match untagged frames only.
any: The ECE will match both tagged and untagged frames.
If supported:
C-Tagged: The ECE will match custom tagged frames only.
S-Tagged: The ECE will match service tagged frames only.rw Enumeration .1.3.6.1.4.1.7483.6.106.1.1.5.1.1 |
tnEvcEceInnerTagVIDFilterTypeThe Inner VLAN ID filter for matching the ECE. It only significant if tag type 'Tagged'
is selected. The possible values are:
any: No VLAN ID filter is specified. (VLAN ID filter status is 'don't-care'.)
specific: If you want to filter a specific VLAN ID value with this ECE, choose this
value. A field for entering a specific value appears.
range: If you want to filter a specific VLAN ID range filter with this ECE, choose
this value. A field for entering a range appears.rw Enumeration .1.3.6.1.4.1.7483.6.106.1.1.5.1.2 |
tnEvcEceInnerTagVIDFilterValWhen 'Specific' is selected for the Inner VLAN ID filter, you can enter a specific value.
The allowed value is from 0 through 4094.rw VlanIdOrNone (Q-BRIDGE-MIB) .1.3.6.1.4.1.7483.6.106.1.1.5.1.3 |
tnEvcEceInnerTagVIDFilterStartWhen 'Range' is selected for the Inner VLAN ID filter, you can enter a specific range.
The allowed range start is from 0 through 4094.rw VlanIdOrNone (Q-BRIDGE-MIB) .1.3.6.1.4.1.7483.6.106.1.1.5.1.4 |
tnEvcEceInnerTagVIDFilterEndWhen 'Range' is selected for the Inner VLAN ID filter, you can enter a specific range.
The allowed range end is from 0 through 4094.rw VlanIdOrNone (Q-BRIDGE-MIB) .1.3.6.1.4.1.7483.6.106.1.1.5.1.5 |
tnEvcEceInnerTagPCPThe PCP value for matching the ECE. It only significant if tag type 'Tagged' is selected.
The possible values are:
any: The ECE will match any PCP value(all bits will be set to 1).
specific: each bit matchs a specific PCP of ECE(from bit0 to bit7).
range: The ECE will match PCP values in the selected range, valid range bit0-bit1, bit2-bit3,
bit4-bit5, bit6-bit7, bit0-bit3 or bit4-bit7.rw Bits .1.3.6.1.4.1.7483.6.106.1.1.5.1.6 |
tnEvcEceInnerTagDEIThe DEI value for matching the ECE. It only significant if tag type 'Tagged' is selected.
The allowed value is: 0, 1 or Any.rw Enumeration .1.3.6.1.4.1.7483.6.106.1.1.5.1.7 |
tnEvcEcePolicerThe ingress bandwidth profile mode for the EVC. The possible values are:
Specific: The allowed range is from 1 through 128.
Discard: All received frames are discarded for the EVC. The value is 4094.
None: None bandwidth profile for the EVC. The value is 4095.
EVC:The bandwidth profile for the specified EVC ID is used. The value is 4096.rw INTEGER .1.3.6.1.4.1.7483.6.106.1.1.5.1.8 |
tnEvcEceOuterVidThe EVC outer tag VID for UNI ports. The allowed value is from 0 through 4094.rw VlanIdOrNone (Q-BRIDGE-MIB) .1.3.6.1.4.1.7483.6.106.1.1.5.1.9 |
tnEvcEceNNIInnerTagTypeThe inner type for the ECE determines whether an inner tag is inserted in frames forwarded to NNI ports.\
The possible values are:
None: An inner tag is not inserted.
C-tag: An inner C-tag is inserted.
S-tag: An inner S-tag is inserted.
S-custom-tag: An inner tag is inserted and the tag type is determined by the VLAN port configuration of the NNI.rw Enumeration .1.3.6.1.4.1.7483.6.106.1.1.5.1.10 |
tnEvcEceInnerVidThe inner tag VLAN ID for the ECE. The allowed range is from 0 through 4094.rw VlanIdOrNone (Q-BRIDGE-MIB) .1.3.6.1.4.1.7483.6.106.1.1.5.1.11 |
tnEvcEceInnerPCPDEIPreserveThe inner tag PCP and DEI preservation for the ECE. The possible values are:
Preserved: The inner tag PCP and DEI is preserved.
Fixed: The inner tag PCP and DEI is fixed.rw Enumeration .1.3.6.1.4.1.7483.6.106.1.1.5.1.12 |
tnEvcEceInnerPCPThe inner tag PCP value for the ECE. The allowed range is from 0 through 7.rw INTEGER .1.3.6.1.4.1.7483.6.106.1.1.5.1.13 |
tnEvcEceInnerDEIThe inner tag DEI value for the ECE. The allowed value is 0 or 1.rw INTEGER .1.3.6.1.4.1.7483.6.106.1.1.5.1.14 |
tnEvcEceDMacValWhen 'Specific' is selected for the DMAC filter, you can enter a specific value.
The legal format is 'xx-xx-xx-xx-xx-xx' or 'xx.xx.xx.xx.xx.xx' or 'xxxxxxxxxxxx' (x is
a hexadecimal digit).rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.7483.6.106.1.1.5.1.15 |
tnEvcEceOuterPCPModeThe outer tag PCP mode for the ECE. The possible values are:
Classified: The outer tag PCP Mode is classified.
Fixed: The outer tag PCP Mode is fixed.
Mapped: The outer tag PCP Mode is based on mapped (QOS, DP).rw Enumeration .1.3.6.1.4.1.7483.6.106.1.1.5.1.16 |
tnEvcEceOuterDEIModeThe outer tag DEI mode for the ECE. The possible values are:
Classified: The outer tag DEI mode is classified.
Fixed: The outer tag DEI mode is fixed.
Drop Precedence: The outer tag DEI mode is drop precedence.rw Enumeration .1.3.6.1.4.1.7483.6.106.1.1.5.1.17 |
tnEvcEceActRuleTypeThe rule type for the ECE. The possible values are:
Both: Ingress and egress rule.
RX: Ingress rule.
TX: Egress rule.rw Enumeration .1.3.6.1.4.1.7483.6.106.1.1.5.1.18 |
tnEvcEceActTxLookupTypeThe TX lookup for the ECE. The possible values are:
VID lookup: The TX lookup is based on VID.
VID-PCP: The TX lookup is based on VID and PCP.
ISDX: The TX lookup is based on ISDX.rw Enumeration .1.3.6.1.4.1.7483.6.106.1.1.5.1.19 |
tnEvcEceActDropPrecTypeThe drop precedence for the ECE. The allowed range is 0, 1 or disabled.rw Enumeration .1.3.6.1.4.1.7483.6.106.1.1.5.1.20 |
tnEvcEceInnerPcpModeThe inner tag PCP mode for the ECE. The possible values are:
Classified: The inner tag PCP Mode is classified.
Fixed: The inner tag PCP Mode is classified.
Mapped: The inner tag PCP Mode is based on mapped (QOS, DP).rw Enumeration .1.3.6.1.4.1.7483.6.106.1.1.5.1.21 |
tnEvcEceIInnerDeiModeThe inner tag DEI mode for the ECE. The possible values are:
Classified: The inner tag DEI mode is classified.
Fixed: The inner tag DEI mode is fixed.
Drop Precedence: The inner tag DEI mode is drop precedence.rw Enumeration .1.3.6.1.4.1.7483.6.106.1.1.5.1.22 |
tnEvcEceIpv4DipFilterThe destination IP address for matching the ECE.
The possible values are:
Any: No DIP filter is specified. (DIP filter status is 'don't-care'.)
Host: If you want to filter a specific host address with this ECE, choose this value. A field
for entering a host address appears.
Network: If you want to filter a specific network address with this ECE, choose this value.
A Two fields for entering a specific network address and network mask appears.rw Enumeration .1.3.6.1.4.1.7483.6.106.1.1.5.1.23 |
tnEvcEceIpv4DipAddrWhen 'Host' or 'Network' is selected for the DIP filter, you can enter a specific host or
network address.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.7483.6.106.1.1.5.1.24 |
tnEvcEceIpv4DipMaskWhen 'Host' or 'Network' is selected for the DIP filter, you can enter a specific network mask.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.7483.6.106.1.1.5.1.25 |
tnEvcEceIpv6DipFilterThe destination IP address for matching the ECE.
The possible values are:
Any: No DIP filter is specified. (DIP filter status is 'don't-care'.)
Host: If you want to filter a specific host address with this ECE, choose this value. A field
for entering a host address appears.
Network: If you want to filter a specific network address with this ECE, choose this value.
A Two fields for entering a specific network address and network mask appears.rw Enumeration .1.3.6.1.4.1.7483.6.106.1.1.5.1.26 |
tnEvcEceIpv6DipAddrWhen 'Host' or 'Network' is selected for the DIP filter, you can enter a specific host or
network address.rw Unsigned32 .1.3.6.1.4.1.7483.6.106.1.1.5.1.27 |
tnEvcEceIpv6DipMaskWhen 'Host' or 'Network' is selected for the DIP filter, you can enter a specific network mask.rw Unsigned32 .1.3.6.1.4.1.7483.6.106.1.1.5.1.28 |
tnEvcEceLookupThe looup type for matching the ECE. The allowed values are:
Basic: First lookup for basic classification.
Advanced: Second lookup for advanced classification.rw Enumeration .1.3.6.1.4.1.7483.6.106.1.1.5.1.29 |
tnEvcEceEtypeFilterThe Ethernet type value for matching the ECE. The possible values are:
Any: No Ethernet type value filter is specified. (Ethernet type filter status is 'don't-care'.)
Specific: If you want to filter a specific Ethernet type value with this ECE, choose this value.rw Enumeration .1.3.6.1.4.1.7483.6.106.1.1.5.1.30 |
tnEvcEceEtypeValueWhen 'Specific' is selected for the Ethernet type filter, you can enter a specific value.
The allowed value is from 0x600 through 0xFFFF but exclude 0x0800(IPv4), 0x806(ARP) and 0x86DD(IPv6).rw Unsigned32 .1.3.6.1.4.1.7483.6.106.1.1.5.1.31 |
tnEvcEceEtypeDataFilterThe Ethernet type data for matching the ECE. The possible values are:
Any: No Ethernet type data filter is specified. (Ethernet type filter status is 'don't-care'.)
Specific: If you want to filter a specific Ethernet type value with this ECE, choose this value.rw Enumeration .1.3.6.1.4.1.7483.6.106.1.1.5.1.32 |
tnEvcEceEtypeDataWhen 'Specific' is selected for the Ethernet type filter, you can enter a specific value.
The allowed value is from 0x600 through 0xFFFF but exclude 0x0800(IPv4), 0x806(ARP) and 0x86DD(IPv6).rw Unsigned32 .1.3.6.1.4.1.7483.6.106.1.1.5.1.33 |
tnEvcEceEtypeDataMaskWhen 'Specific' is selected for the Ethernet type data filter, you can enter a specific value.
It is a pair of the Ethernet type data and its mask. The allowed value is from 0x0 through 0xFFFF.rw Unsigned32 .1.3.6.1.4.1.7483.6.106.1.1.5.1.34 |
tnEvcEceLlcDSAPFilterThe LLC DSAP for matching the ECE. The possible values are:
Any: No LLC DSAP value filter is specified. (LLC DSAP filter status is 'don't-care'.)
Specific: If you want to filter a specific LLC DSAP value with this ECE, choose this value.rw Enumeration .1.3.6.1.4.1.7483.6.106.1.1.5.1.35 |
tnEvcEceLlcDSAPValueWhen 'Specific' is selected for the LLC DSAP filter, you can enter a specific value.
The allowed value is from 0x0 through 0xFFrw Unsigned32 .1.3.6.1.4.1.7483.6.106.1.1.5.1.36 |
tnEvcEceLlcSSAPFilterThe LLC SSAP for matching the ECE. The possible values are:
Any: No LLC SSAP value filter is specified. (LLC SSAP filter status is 'don't-care'.)
Specific: If you want to filter a specific LLC SSAP value with this ECE, choose this value.rw Enumeration .1.3.6.1.4.1.7483.6.106.1.1.5.1.37 |
tnEvcEceLlcSSAPValueWhen 'Specific' is selected for the LLC SSAP filter, you can enter a specific value.
The allowed value is from 0x0 through 0xFF.rw Unsigned32 .1.3.6.1.4.1.7483.6.106.1.1.5.1.38 |
tnEvcEceLlcCtrlFilterThe LLC control for matching the ECE. The possible values are:
Any: No LLC control value filter is specified. (LLC control filter status is 'don't-care'.)
Specific: If you want to filter a specific LLC control value with this ECE, choose this value.rw Enumeration .1.3.6.1.4.1.7483.6.106.1.1.5.1.39 |
tnEvcEceLlcCtrlValueWhen 'Specific' is selected for the LLC control filter, you can enter a specific value.
The allowed value is from 0x0 through 0xFF.rw Unsigned32 .1.3.6.1.4.1.7483.6.106.1.1.5.1.40 |
tnEvcEceLlcDataFilterThe LLC data for matching the ECE. The possible values are:
Any: No LLC data filter is specified. (LLC filter status is 'don't-care'.)
Specific: If you want to filter a specific LLC value with this ECE, choose this value.rw Enumeration .1.3.6.1.4.1.7483.6.106.1.1.5.1.41 |
tnEvcEceLlcDataValueWhen 'Specific' is selected for the LLC data filter, you can enter a specific value.
It is a pair of the LLC data and its mask. The allowed value is from 0x0 through 0xFFFF.rw Unsigned32 .1.3.6.1.4.1.7483.6.106.1.1.5.1.42 |
tnEvcEceLlcDataMaskWhen 'Specific' is selected for the LLC data filter, you can enter a specific mask.
The allowed value is from 0x0 through 0xFFFF.rw Unsigned32 .1.3.6.1.4.1.7483.6.106.1.1.5.1.43 |
tnEvcEceSnapOuiFilterThe SNAP OUI for matching the ECE. The possible values are:
Any: No SNAP OUI value filter is specified. (SNAP OUI filter status is 'don't-care'.)
Specific: If you want to filter a specific SNAP OUI value with this ECE, choose this value.rw Enumeration .1.3.6.1.4.1.7483.6.106.1.1.5.1.44 |
tnEvcEceSnapOuiValueWhen 'Specific' is selected for the SNAP OUI filter, you can enter a specific value.
The allowed value is from 00-00-00 through FF-FF-FF.rw Unsigned32 .1.3.6.1.4.1.7483.6.106.1.1.5.1.45 |
tnEvcEceSnapPidFilterThe SNAP PID for matching the ECE. The possible values are:
Any: No SNAP PID value filter is specified. (SNAP PID filter status is 'don't-care'.)
Specific: If you want to filter a specific SNAP PID value with this ECE, choose this value.rw Enumeration .1.3.6.1.4.1.7483.6.106.1.1.5.1.46 |
tnEvcEceSnapPidValueWhen 'Specific' is selected for the SNAP PID filter, you can enter a specific value.
The allowed value is from 0x0 through 0xFFFF.rw Unsigned32 .1.3.6.1.4.1.7483.6.106.1.1.5.1.47 |
tnEvcEceL2cpProtoTypeThe L2CP type for the ECE. The possible values are:
STP/RSTP/MSTP: Match STP/RSTP/MSTP frames.
Pause: Match Pause frames.
LACP: Match LACP frames.
LAMP: Match LAMP frames.
Link OAM(802.1ah): Match Link OAM(802.1ah) frames.
Port Authentication(802.1x): Match Port Authentication(802.1x) frames.
E-LMI: Match PB Group Address frames.
PB Group Address: Match PB Group Address frames.
PB GVRP: Match PB GVRP frames.
LLDP: Match LLDP frames.
GMRP: Match GMRP frames.
GVRP: Match GVRP frames.
ULD: Match ULD frames.
PAgP: Match PAgP frames.
PVST/PVST+: Match PVST/PVST+ frames.
Cisco BPDU: Match Cisco BPDU frames.
CDP: Match CDP frames.
VTP: Match VTP frames.
DTP: Match DTP frames.
STP Uplink Fast: Match STP Uplink Fast frames.
Cisco CFM: Match Cisco CFM frames.rw Enumeration .1.3.6.1.4.1.7483.6.106.1.1.5.1.48 |
tnEvcStatGroup OBJECT IDENTIFIER .1.3.6.1.4.1.7483.6.106.1.2 |
tnEvcStatTableThis table provides NNI port traffic statistics for the selected EVC.
It also shows counters for UNI ports of ECEs mapping to the EVC. SEQUENCE OF TnEvcStatEntry .1.3.6.1.4.1.7483.6.106.1.2.1 |
tnEvcStatEntryThis entry represents an entry of EVC statistics. TnEvcStatEntry .1.3.6.1.4.1.7483.6.106.1.2.1.1 |
tnEvcStatClassThe traffic class for the EVC. INTEGER .1.3.6.1.4.1.7483.6.106.1.2.1.1.1 |
tnEvcStatGreenFrameRxThe number of green received.ro Counter64 .1.3.6.1.4.1.7483.6.106.1.2.1.1.2 |
tnEvcStatGreenFrameTxThe number of green transmitted.ro Counter64 .1.3.6.1.4.1.7483.6.106.1.2.1.1.3 |
tnEvcStatYellowFrameRxThe number of yellow received.ro Counter64 .1.3.6.1.4.1.7483.6.106.1.2.1.1.4 |
tnEvcStatYellowFrameTxThe number of yellow transmitted.ro Counter64 .1.3.6.1.4.1.7483.6.106.1.2.1.1.5 |
tnEvcStatRedFrameRxThe number of red received.ro Counter64 .1.3.6.1.4.1.7483.6.106.1.2.1.1.6 |
tnEvcStatDiscardGreenFrameThe number of discarded in the green color.ro Counter64 .1.3.6.1.4.1.7483.6.106.1.2.1.1.7 |
tnEvcStatDiscardYellowFrameThe number of discarded in the yellow color.ro Counter64 .1.3.6.1.4.1.7483.6.106.1.2.1.1.8 |
tnEvcStatClearClears the counters for selected ports when
the value of tnEvcStatClear is true.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.6.106.1.2.1.1.9 |
tnEvcExtStatTableThis table provides port traffic statistics for the selected EVC.
It also shows counters for UNI ports of ECEs mapping to the EVC. SEQUENCE OF TnEvcExtStatEntry .1.3.6.1.4.1.7483.6.106.1.2.2 |
tnEvcExtStatEntryThis entry represents an entry of EVC statistics. TnEvcExtStatEntry .1.3.6.1.4.1.7483.6.106.1.2.2.1 |
tnEvcExtStatTypeThe traffic class for the EVC. Enumeration .1.3.6.1.4.1.7483.6.106.1.2.2.1.1 |
tnEvcExtStatIndexThe EVC or ECE index. INTEGER .1.3.6.1.4.1.7483.6.106.1.2.2.1.2 |
tnEvcExtStatPortThe EVC or ECE index. INTEGER .1.3.6.1.4.1.7483.6.106.1.2.2.1.3 |
tnEvcExtStatGreenFrameRxThe number Frames of green received.ro Counter64 .1.3.6.1.4.1.7483.6.106.1.2.2.1.4 |
tnEvcExtStatGreenFrameTxThe number Frames of green transmitted.ro Counter64 .1.3.6.1.4.1.7483.6.106.1.2.2.1.5 |
tnEvcExtStatGreenBytesRxThe number Bytes of green received.ro Counter64 .1.3.6.1.4.1.7483.6.106.1.2.2.1.6 |
tnEvcExtStatGreenBytesTxThe number Bytes of green transmitted.ro Counter64 .1.3.6.1.4.1.7483.6.106.1.2.2.1.7 |
tnEvcExtStatYellowFrameRxThe number Frames of yellow received.ro Counter64 .1.3.6.1.4.1.7483.6.106.1.2.2.1.8 |
tnEvcExtStatYellowFrameTxThe number Frames of yellow transmitted.ro Counter64 .1.3.6.1.4.1.7483.6.106.1.2.2.1.9 |
tnEvcExtStatYellowBytesRxThe number Bytes of yellow received.ro Counter64 .1.3.6.1.4.1.7483.6.106.1.2.2.1.10 |
tnEvcExtStatYellowBytesTxThe number Bytes of yellow transmitted.ro Counter64 .1.3.6.1.4.1.7483.6.106.1.2.2.1.11 |
tnEvcExtStatRedFrameRxThe number Frames of red received.ro Counter64 .1.3.6.1.4.1.7483.6.106.1.2.2.1.12 |
tnEvcExtStatRedBytesRxThe number Bytes of red received.ro Counter64 .1.3.6.1.4.1.7483.6.106.1.2.2.1.13 |
tnEvcExtStatDiscardFrameRxThe number Frames of discarded received.ro Counter64 .1.3.6.1.4.1.7483.6.106.1.2.2.1.14 |
tnEvcExtStatDiscardFrameTxThe number Frames of discarded transmitted.ro Counter64 .1.3.6.1.4.1.7483.6.106.1.2.2.1.15 |
tnEvcExtStatDiscardBytesRxThe number Bytes of discarded received.ro Counter64 .1.3.6.1.4.1.7483.6.106.1.2.2.1.16 |
tnEvcExtStatDiscardBytesTxThe number Bytes of discarded transmitted.ro Counter64 .1.3.6.1.4.1.7483.6.106.1.2.2.1.17 |
tnEvcExtStatclearClear the value by EVC or ECE index.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.6.106.1.2.2.1.18 |
tnEvcL2cpMgmtGroup OBJECT IDENTIFIER .1.3.6.1.4.1.7483.6.106.1.3 |
tnEvcL2cpCfgTableThis table supports L2CP settings. SEQUENCE OF TnEvcL2cpCfgEntry .1.3.6.1.4.1.7483.6.106.1.3.3 |
tnEvcL2cpCfgEntryL2CP settings table entry. TnEvcL2cpCfgEntry .1.3.6.1.4.1.7483.6.106.1.3.3.1 |
tnEvcL2cpCfgInterfaceNumberSets L2CP interface number. Unsigned32 .1.3.6.1.4.1.7483.6.106.1.3.3.1.1 |
tnEvcL2cpCfgIndexSets L2CP index number on an interface. Unsigned32 .1.3.6.1.4.1.7483.6.106.1.3.3.1.2 |
tnEvcL2cpCfgTypeSets L2CP type setting.rw Enumeration .1.3.6.1.4.1.7483.6.106.1.3.3.1.3 |
tnEvcL2cpCfgMatchScopeSets L2CP selection matching scope.rw Enumeration .1.3.6.1.4.1.7483.6.106.1.3.3.1.4 |
tnEvcL2cpCfgMacAddressSets L2CP Destination MAC address.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.7483.6.106.1.3.3.1.5 |
tnEvcL2cpCfgProtocolSets L2CP protocol.rw Unsigned32 .1.3.6.1.4.1.7483.6.106.1.3.3.1.6 |
tnEvcL2cpCfgSubTypeSets L2CP subtype for the protocol selected.rw Unsigned32 .1.3.6.1.4.1.7483.6.106.1.3.3.1.7 |
tnEvcL2cpCfgEvcNameSets L2CP EVC association.rw OCTET STRING .1.3.6.1.4.1.7483.6.106.1.3.3.1.8 |
tnEvcL2cpCfgValidSets L2CP valid instance.rw Enumeration .1.3.6.1.4.1.7483.6.106.1.3.3.1.9 |
tnEvcL2cpCfgRowStatusThe status of the row.
The writable columns in a row cannot be changed if the row
is active. All columns must have a valid value before a row
can be activated.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.7483.6.106.1.3.3.1.10 |
tnEvcConformance OBJECT IDENTIFIER .1.3.6.1.4.1.7483.6.106.1.8 |
tnEvcGroups OBJECT IDENTIFIER .1.3.6.1.4.1.7483.6.106.1.8.1 |