TRANSITION-SMI
The TRANSITION-SMI module defines the Structure of Management Information (SMI) namespace and data type definitions required for Transition Networks hardware devices, enabling the monitoring of vendor-specific interface statistics, system health metrics, and protocol states via SNMP. It serves as the foundational schema that allows network management systems to parse and interpret specific Transition Networks MIB objects for device configuration and fault isolation.
Imported Objects
Objects
34 total| Object Name |
|---|
transitionThe Structure of Management Information for the Transition Networks MIBs. MODULE-IDENTITY .1.3.6.1.4.1.868 |
productId OBJECT IDENTIFIER .1.3.6.1.4.1.868.1 |
tnModulesThe Transition networks products are assigned module identities from here. OBJECT IDENTIFIER .1.3.6.1.4.1.868.1.5 |
tnIONPlatform OBJECT IDENTIFIER .1.3.6.1.4.1.868.1.5.1 |
tnCESwitches OBJECT IDENTIFIER .1.3.6.1.4.1.868.1.5.2 |
tnCES3280 OBJECT IDENTIFIER .1.3.6.1.4.1.868.1.5.2.1 |
tnCES3280TST OBJECT IDENTIFIER .1.3.6.1.4.1.868.1.5.2.2 |
tnCES3280S OBJECT IDENTIFIER .1.3.6.1.4.1.868.1.5.2.3 |
tnCES3280STST OBJECT IDENTIFIER .1.3.6.1.4.1.868.1.5.2.4 |
tnCES3290_24 OBJECT IDENTIFIER .1.3.6.1.4.1.868.1.5.2.5 |
tnCES3290_42 OBJECT IDENTIFIER .1.3.6.1.4.1.868.1.5.2.6 |
tnCES4140 OBJECT IDENTIFIER .1.3.6.1.4.1.868.1.5.2.20 |
tnCES4212 OBJECT IDENTIFIER .1.3.6.1.4.1.868.1.5.2.21 |
tnCES4224 OBJECT IDENTIFIER .1.3.6.1.4.1.868.1.5.2.22 |
tnIndSwitches OBJECT IDENTIFIER .1.3.6.1.4.1.868.1.5.3 |
tnInd3280L OBJECT IDENTIFIER .1.3.6.1.4.1.868.1.5.3.1 |
tnInd3284L OBJECT IDENTIFIER .1.3.6.1.4.1.868.1.5.3.2 |
tnInd3280H OBJECT IDENTIFIER .1.3.6.1.4.1.868.1.5.3.3 |
tnInd3284H OBJECT IDENTIFIER .1.3.6.1.4.1.868.1.5.3.4 |
tnPBSwitches OBJECT IDENTIFIER .1.3.6.1.4.1.868.1.5.4 |
tnPBPLUSTDM4AC OBJECT IDENTIFIER .1.3.6.1.4.1.868.1.5.4.1 |
tnPBPLUSTDM4DC OBJECT IDENTIFIER .1.3.6.1.4.1.868.1.5.4.2 |
tnPBPLUSTDM1VXAC OBJECT IDENTIFIER .1.3.6.1.4.1.868.1.5.4.3 |
tnPBPLUSTDM1VXDC OBJECT IDENTIFIER .1.3.6.1.4.1.868.1.5.4.4 |
tnPBOAMTDM16 OBJECT IDENTIFIER .1.3.6.1.4.1.868.1.5.4.5 |
tnPBTDMCONTRAAC OBJECT IDENTIFIER .1.3.6.1.4.1.868.1.5.4.6 |
tnPBTDMCONTRADC OBJECT IDENTIFIER .1.3.6.1.4.1.868.1.5.4.7 |
tnLIBSwitches OBJECT IDENTIFIER .1.3.6.1.4.1.868.1.5.5 |
tnLIBUnoAC OBJECT IDENTIFIER .1.3.6.1.4.1.868.1.5.5.1 |
tnLIBUnoDC OBJECT IDENTIFIER .1.3.6.1.4.1.868.1.5.5.2 |
tnLIBMidi OBJECT IDENTIFIER .1.3.6.1.4.1.868.1.5.5.3 |
products OBJECT IDENTIFIER .1.3.6.1.4.1.868.2 |
tnProductsThe Transition networks next generation Products. OBJECT IDENTIFIER .1.3.6.1.4.1.868.2.5 |
tnExperimentalThis provides a root object identifier from which experimental mibs may be temporarily based. mibs are typicially based here if they fall in one of two categories 1) are IETF work-in-process mibs which have not been assigned a permanent object identifier by the IANA. 2) are internal work-in-process which has not been assigned a permanent object identifier typicially because the mib is not ready for deployment. NOTE WELL: support for mibs in the tnExperimental subtree will be deleted when a permanent object identifier assignment is made. OBJECT IDENTIFIER .1.3.6.1.4.1.868.3 |
More MIBs from Transition
Browse all TransitionMIBs →SNMP MIB module
The TN-MPLS-MIB module enables the monitoring and configuration of Multiprotocol Label Switching (MPLS) parameters, including label bindings, forwarding equivalence classes, and tunnel states, on Nokia (formerly Alcatel-Lucent) Service Router and IP/MPLS network devices.
Standard SNMP MIB module defining data structures for TNI-MIB.
The TN-CES-MIB module enables monitoring and management of Circuit Emulation Service (CES) sessions on network equipment, specifically tracking performance metrics such as session status, packet loss, jitter, and synchronization errors for T1/E1 circuit emulation over packet-switched networks.
The TN-LLDP-MIB module enables monitoring and management of Link Layer Discovery Protocol (LLDP) neighbor discovery data, including system identification, port descriptions, and TLV (Type-Length-Value) attributes, on Trellix (formerly McAfee) network infrastructure devices. This private MIB extension facilitates the collection of LLDP session states and neighbor topology information for network inventory and connectivity verification.
The TN-DHCP-SERVER-MIB enables monitoring and management of Dynamic Host Configuration Protocol server configurations, lease states, and address pool utilization on Tanaza network infrastructure devices. This module provides visibility into DHCP scope assignments, client binding tables, and server operational status to facilitate network address administration.