MIB Catalog

MIB module

The MIB module used to describe the ArrowPoint Communications Keepalives

MIB module

MIB module

MIB module

MIB module

MIB module

This is the portion of the Lancity enterprise MIB that applies to MCNS cable modems and related devices.

This is a header for the Lancity enterprise MIB. All objects appear elsewhere.

This is the MIB module for the kelvin-pCOWeb-Chiller device.

This example MIB module defines ...

MIB module

Module Identity for KST-2000A/B Transceiver.

The Structure of Layer 2 Network Management Information.

The structure of Layer 2 protocol tunneling for the proprietary enterprise.

MIB module

This MIB contains common managed object definitions for multicast in Layer 2 and Layer 3 VPNs, defined by [I-D.ietf-l2vpn-vpls-mcast] and RFC 6513/6514. Copyright (C) The

This MIB module defines a table representing the attribute information of the provider tunnels (P-tunnels) on a PE router. This MIB module will be used by other MIB modules designed for monitoring and

This MIB module specifies textual conventions for Border Gateway Protocol/Multiprotocol Label Switching Layer 2 and Layer 3 Virtual Private Networks that support multicast (L2L3VpnMCast networks). Cop

The MIB module that describes managed objects of general use by the Layer Two Transport Protocol.

The MIB module that describes managed objects of general use by the Layer Two Tunneling Protocol, Version 3 (L2TPv3).

This MIB contains TCs for L3VPN.

The Link Aggregation module for managing IEEE 802.3ad.

MIB module

The MIB module for KarlNet entities. iso(1).org(3).dod(6).internet(1).mgmt(4).enterprises(1).karlnet(762)

MIB module

This MIB describes objects used by keepalived, both for VRRP and health checker.

This is an example MIB

MIB module

MIB module

MIB module

MIB module

This is the enterprise MIB definition file for all Lancast Managed products. Copyright 1999 Lancast Inc.

MIB module

MIB module

MIB module

MIB module

The kernel reader mib obtains information from the operating system about kernel based entities, including CPUs, disk drives, streams buffers, VM statistics, etc. This information is used to monitor a

The module defines MIB for LAN Tunneling configuration

MIB module for LAN.

MIB module

MIB Definitions for LANCOM 1711+ VPN

Management information base definitions

MIB Definitions for LANCOM 1721 VPN (Annex B)

MIB Definitions for LANCOM 1722 VoIP (Annex B)

draft-weilian-l2vpn-mib-02 version. Changes from previous version: 1) Updata the content of L2vpn Instance table. 2) Change the index and content of L2vpn PW table which

The QUANTA Private MIB for Keying Utility

The agent capabilities definitions for the MultiProtocol Label Switching (MPLS) component of the SNMP agent in the Juniper E-series family of products.

The MultiProtocol Label Switching (MPLS) MIB for the Juniper Networks enterprise. This MIB contains managed objects for basic MPLS configuration of: 1. Global tasks - common MPLS usage configurations

The IP multicast router MIB for Juniper Networks enterprise.

The agent capabilities definitions for the multicast router component of the SNMP agent in the Juniper E-series family of products.

The agent capabilities definitions for the remote name server (NS) lookup component of the SNMP agent in the Juniper E-series family of products.

The agent capabilities definitions for the Notification Log component of the SNMP agent in the Juniper E-series family of products.

The agent capabilities definitions for the Open Shortest Path First (OSPF) routing protocol component of the SNMP agent in the Juniper E-series family of products.

The OSPF Protocol MIB for the Juniper Networks enterprise.

The Packet Mirror MIB for the Juniper Networks enterprise.

The agent capabilities definitions for the Protocol Independent Multicast (PIM) component of the SNMP agent in the Juniper E-series family of products.

The enterprise MIB module for management of PIM routers.

The Policy MIB for the Juniper Networks enterprise.

The agent capabilities definitions for the point-to-point protocol (PPP) component of the SNMP agent in the Juniper E-series family of products.

The Point-to-Point Protocol (PPP) MIB for the Juniper enterprise.

The Point-to-Point Protocol (PPP) Profile MIB for the Juniper Netowrks enterprise. This MIB provides configuration parameters that extend the tables found in the Juniper-PROFILE-MIB to support profile

The agent capabilities definitions for the PPP Profile component of the SNMP agent in the Juniper E-series family of products.

The Point-to-Point Protocol over Ethernet (PPPoE) MIB for the Juniper E-series product family. This MIB contains managed objects for each of two interface layers: PPPoE interfaces, and PPPoE subinterf

The point-to-point protocol over Ethernet (PPPoE) profile MIB for the Juniper enterprise.

The agent capabilities definitions for the point-to-point protocol over Ethernet (PPPoE) component of the SNMP agent in JUNOSe family of products.

The agent capabilities definitions for the PPPoE Profile component of the SNMP agent in the Juniper E-series family of products.

The Profile MIB for the Juniper Networks enterprise.

The agent capabilities definitions for the Packet Mirror component of the SNMP agent in the Juniper E-series family of products.

The agent capabilities definitions for the Ping component of the SNMP agent in the Juniper E-series family of products.

The agent capabilities definitions for the Policy Manager component of the SNMP agent in the Juniper E-series family of products.

The sysObjectID registry for Juniper Networks products. This is the top-level registry for object identifiers for SNMP managed products that are manufactured or distibuted by Juniper Networks.

The agent capabilities definitions for the Profile Manager component of the SNMP agent in the Juniper E-series family of products.

The Quality of Service (QoS) MIB for the Juniper Networks enterprise.

The agent capabilities definitions for the Quality of Service (QoS) Manager component of the SNMP agent in the Juniper E-series family of products.

The agent capabilities definitions for the Remote Authentication Dial In User Service (RADIUS) Client component of the SNMP agent in the Juniper E-series family of products.

The Remote Authentication Dial In User Service (RADIUS) Client MIB for the Juniper enterprise.

The agent capabilities definitions for the RADIUS Disconnect component of the SNMP agent in the Juniper E-series family of products.

The RADIUS Disconnect MIB for the Juniper Networks enterprise.

The RADIUS Disconnect MIB for the Juniper Networks enterprise.

The agent capabilities definitions for the RADIUS Proxy component of the SNMP agent in the Juniper E-series family of products.

The RADIUS Proxy MIB for the Juniper Networks enterprise.

The redundancy configuration MIB for Juniper Networks enterprise.

The agent capabilities definitions for the Routing Information Protocol (RIP) component of the SNMP agent in the Juniper E-series family of products.

The Router MIB is used to manage the creation and deletion as well as the administrative states of the protocols and functions that run within a designated router.

Administratively assigned object identifiers for Juniper Networks E-series edge router products.

The agent capabilities definitions for the Router component of the SNMP agent in the Juniper E-series family of products.

The agent capabilities definitions for the Serial Line Encapsulation Protocol (SLEP) component of the SNMP agent in the Juniper E-series family of products.

The Serial Line Encapulation Protocol (SLEP) MIB for the Juniper Networks enterprise.

The agent capabilities definitions for the Switched Multimegabit Data Service (SMDS) management component of the SNMP agent in the Juniper E-series family of products.

The Switched Multimegabit Data Service (SMDS) MIB for the Juniper Networks enterprise.

The agent capabilities definitions for the SNMP entity component of the SNMP agent in the Juniper E-series family of products.

MIB objects for configuring SNMP-based management access into Juniper E-series products.

The agent capabilities definitions for the SONET component of the SNMP agent in the Juniper E-series family of products.

The Service Selection Center (SSC) Client MIB for the Juniper Networks enterprise.

The agent capabilities definitions for the Service Selection Center (SSC) Client component of the SNMP agent in the Juniper E-series family of products.

The Subscriber MIB for the Juniper Networks enterprise.

The agent capabilities definitions for the Subscriber component of the SNMP agent in the Juniper E-series family of products.

The agent capabilities definitions for the system clock component of the SNMP agent in the Juniper E-series family of products.

The System Clock and Network Time Protocol (NTP) MIB for the Juniper Networks enterprise. The System Clock section of the MIB allows setting the system clock time, date and timezone. All definitions a

The MIB objects for managing a Juniper E-series (JUNOSe) system. This MIB complements the ENTITY-MIB.entPhysicalTable by providing the system's physical information in a format that is more user frien

The agent capabilities definitions for the Terminal Access Controller Access Control System Plus (TACACS+) client component of the SNMP agent in the Juniper E-series family of products.

The Terminal Access Controller Access Control System Plus (TACACS+) Client MIB for the Juniper Networks enterprise.

Textual conventions defined and used by the Juniper Networks enterprise.

The agent capabilities definitions for the Terminal Server Management (TSM) component of the SNMP agent in the Juniper E-series family of products.

The Tunnel Server Management (TSM) MIB for the Juniper Networks enterprise.

The agent capabilities definitions for the Trace Route component of the SNMP agent in the Juniper E-series family of products.

The ATM MIB for the Juniper enterprise.

The Generic Interfaces MIB for the Juniper Networks enterprise.

The SNMP Management Identifiers (SMI) for the Juniper Networks enterprise. This is the top-level registry for SNMP managed objects and other SNMP related information modules under the Juniper Networks

The SONET MIB for the Juniper Networks enterprise. This MIB contains managed objects for SONET interfaces. It contains management objects for configuration of interface attributes that either are abse

The agent capabilities definitions for the X.21/V.35 server component of the SNMP agent in the Juniper E-series family of products.

The X.21/V.35 Server MIB for the Juniper Networks enterprise.

The agent capabilities definitions for the Virtual Router Redundancy Protocol (VRRP) component of the SNMP agent in the Juniper E-series family of products.

MIB module

MIB module

MIB module

Defined the MIB tree for Kaspersky products.

Defined the MIB tree for KAV4 for Linux FS.

Defined the MIB tree for KAV4FS statistics.