Juniper-REDUNDANCY-MIB
AI MIB Summary
The Juniper-REDUNDANCY-MIB provides SNMP access to configure and monitor high-availability redundancy states, including chassis redundancy group status, failover conditions, and protocol-specific synchronization metrics on Juniper Networks devices. This module enables administrators to verify the operational integrity of redundant control planes and data planes by exposing real-time state transitions and membership information for redundancy groups.
The redundancy configuration MIB for Juniper Networks enterprise.
Main OID:
juniRedundancyMIB.1.3.6.1.4.1.4874.2.2.74
46
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
46 total| Object Name |
|---|
juniRedundancyMIBThe redundancy configuration MIB for Juniper Networks enterprise. MODULE-IDENTITY .1.3.6.1.4.1.4874.2.2.74 |
juniRedundancyNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.74.0 |
juniRedundancyColdSwitchoverNotificationThis notification is generated in a dual SRP system when control transfers from one to SRP to the other in file system synchronization mode or when high availability is not operational. This notification is sent by the newly active SRP immediately following the switchover in which configuration is preserved but volatile state is lost. NOTIFICATION-TYPE .1.3.6.1.4.1.4874.2.2.74.0.1 |
juniRedundancyWarmSwitchoverNotificationThis notification is generated in a dual SRP system when control transfers from one SRP to the other and high availability is operational. This notification is sent by the newly active SRP immediately following the switchover in which configuration and volatile state are preserved. NOTIFICATION-TYPE .1.3.6.1.4.1.4874.2.2.74.0.2 |
juniRedundancyStateEnabledNotificationA state change notification sent by active SRP whenever system enters 'active' state. NOTIFICATION-TYPE .1.3.6.1.4.1.4874.2.2.74.0.3 |
juniRedundancyStateDisabledNotificationA state change notification sent by active SRP whenever system enters 'disabled' state. NOTIFICATION-TYPE .1.3.6.1.4.1.4874.2.2.74.0.4 |
juniRedundancyStatePendingNotificationA state change notification sent by active SRP whenever system enters 'pending' state. NOTIFICATION-TYPE .1.3.6.1.4.1.4874.2.2.74.0.5 |
juniRedundancyModeNotificationA mode change notification sent by active SRP whenever redundancy mode of the system is changed from 'fileSystemSynchronization' to 'highAvailability' and vice versa. NOTIFICATION-TYPE .1.3.6.1.4.1.4874.2.2.74.0.6 |
juniRedundancyObjects OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.74.1 |
juniRedundancyStatus OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.74.1.1 |
juniRedundancyActiveSlotA unique identifier for active SRP slot.ro Integer32 .1.3.6.1.4.1.4874.2.2.74.1.1.1 |
juniRedundancyActiveSlotStateThe current state of redundancy on active SRP.ro JuniRedundancyState .1.3.6.1.4.1.4874.2.2.74.1.1.2 |
juniRedundancyStandbySlotA unique identifier for standby SRP slot.ro Integer32 .1.3.6.1.4.1.4874.2.2.74.1.1.3 |
juniRedundancyStandbySlotStateThe current state of redundancy on standby SRP.ro JuniRedundancyState .1.3.6.1.4.1.4874.2.2.74.1.1.4 |
juniRedundancyLastResetReasonThe reason for the last SRP reset.ro JuniRedundancyResetReason .1.3.6.1.4.1.4874.2.2.74.1.1.5 |
juniRedundancyLastSystemActivationTimeThe value of sysUptime when the system is operational either following a reload or a switchover. The value 0 is a special value to indicate 'from reset'.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.4874.2.2.74.1.1.6 |
juniRedundancyLastSystemActivationTypeThe type of last SRP activation when the system became operational.ro JuniRedundancySystemActivationType .1.3.6.1.4.1.4874.2.2.74.1.1.7 |
juniRedundancyHaActiveTimeThe value of sysUptime when active SRP enters 'active' state as indicated in juniRedundancyActiveSlotState object. The value is 0 in file system synchronization redundancy mode.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.4874.2.2.74.1.1.8 |
juniRedundancyCfg OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.74.1.2 |
juniRedundancyNotifsEnabledAllows enabling and disabling of redundancy subsystem notifications.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.74.1.2.1 |
juniRedundancyCfgRedundancyModeIndicates the redundancy mode configured on the system.rw JuniRedundancyMode .1.3.6.1.4.1.4874.2.2.74.1.2.2 |
juniRedundancyHistory OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.74.1.3 |
juniRedundancySystemActivationHistoryTableMaxLengthMaximum number of entries allowed in juniRedundancySystemActivationHistoryTable. A value of 0 will result in no history being displayed in juniRedundancySystemActivationHistoryTable.rw Integer32 .1.3.6.1.4.1.4874.2.2.74.1.3.1 |
juniRedundancySystemActivationHistoryCommandA control variable to perform certain operations on juniRedundancySystemActivationHistoryTable.rw JuniRedundancyHistoryCommand .1.3.6.1.4.1.4874.2.2.74.1.3.2 |
juniRedundancySystemActivationHistoryTableA table that tracks the history of all reloads and switchovers that have occurred since system is powered on. The maximum number of entries permissible in this table is defined by juniRedundancySystemActivationHistoryTableMaxLength. When the number of entries in the table reaches the maximum limit, the next entry would replace the oldest existing entry in the table. SEQUENCE OF JuniRedundancySystemActivationHistoryEntry .1.3.6.1.4.1.4874.2.2.74.1.3.3 |
juniRedundancySystemActivationHistoryEntryThe entries in this table contain the reload and switchover information. Each entry in the table is indexed by juniRedundancySystemActivationHistoryIndex. The index wraps around to 1 after reaching the maximum value. JuniRedundancySystemActivationHistoryEntry .1.3.6.1.4.1.4874.2.2.74.1.3.3.1 |
juniRedundancySystemActivationHistoryIndexAn integer value for the purpose of indexing system activation history table. After reaching maximum value as indicated by juniRedundancySystemActivationHistoryTableMaxLength, it wraps around to 1. Integer32 .1.3.6.1.4.1.4874.2.2.74.1.3.3.1.1 |
juniRedundancyHistoryResetTypeIndicates the nature of the reset - reload or switchover - and the slot types involved. Depending on the value of this object, certain elements of JuniRedundancySystemActivationHistoryEntry will not be applicable.ro JuniRedundancyResetType .1.3.6.1.4.1.4874.2.2.74.1.3.3.1.2 |
juniRedundancyHistoryActivationTypeIndicates the activation type of the particular historical system activation entry with respect to the slot types involved.ro JuniRedundancySystemActivationType .1.3.6.1.4.1.4874.2.2.74.1.3.3.1.3 |
juniRedundancyHistoryPrevActiveSlotIndicates the slot number of active SRP or line card that went down.ro Integer32 .1.3.6.1.4.1.4874.2.2.74.1.3.3.1.4 |
juniRedundancyHistoryPrevActiveReleaseIndicates the system-wide boot release file name of the slot indicated by juniRedundancyHistoryPrevActiveSlot.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.74.1.3.3.1.5 |
juniRedundancyHistoryCurrActiveSlotIndicates the slot number of standby SRP or spare line card that took over.ro Integer32 .1.3.6.1.4.1.4874.2.2.74.1.3.3.1.6 |
juniRedundancyHistoryCurrActiveReleaseIndicates the system-wide boot release file name of the slot indicated by juniRedundancyHistoryCurrActiveSlot.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.74.1.3.3.1.7 |
juniRedundancyHistoryResetReasonIndicates the reason for reload or switchover of the slots involved.ro JuniRedundancyResetReason .1.3.6.1.4.1.4874.2.2.74.1.3.3.1.8 |
juniRedundancyHistoryActivationTimeIndicates the date and time when the reload or switchover of the slots occurred.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.74.1.3.3.1.9 |
juniRedundancyHistoryReloadsIndicates the number of reloads since the system is powered on.ro Integer32 .1.3.6.1.4.1.4874.2.2.74.1.3.4 |
juniRedundancyHistoryColdSwitchoversIndicates the number of cold switchovers since the system is powered on.ro Integer32 .1.3.6.1.4.1.4874.2.2.74.1.3.5 |
juniRedundancyHistoryWarmSwitchoversIndicates the number of warm switchovers since the system is powered on.ro Integer32 .1.3.6.1.4.1.4874.2.2.74.1.3.6 |
juniRedundancyMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.74.2 |
juniRedundancyMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.74.2.1 |
juniRedundancyMIBComplianceThe compliance statement for system redundancy support. Unknown .1.3.6.1.4.1.4874.2.2.74.2.1.1 |
juniRedundancyMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.74.2.2 |
juniRedundancyStatusGroupThe collection of redundancy status objects. Unknown .1.3.6.1.4.1.4874.2.2.74.2.2.1 |
juniRedundancyCfgGroupThe collection of redundancy configuration objects. Unknown .1.3.6.1.4.1.4874.2.2.74.2.2.2 |
juniRedundancyHistoryGroupThe collection of redundancy history objects. Unknown .1.3.6.1.4.1.4874.2.2.74.2.2.3 |
juniRedundancyNotificationGroupThe collection of notifications for redundancy events. Unknown .1.3.6.1.4.1.4874.2.2.74.2.2.4 |