Home/Catalog/Juniper-RADIUS-CLIENT-MIB

Juniper-RADIUS-CLIENT-MIB

AI MIB Summary

The Juniper-RADIUS-CLIENT-MIB enables monitoring of RADIUS client authentication sessions, accounting records, and server reachability states on Juniper network devices. It provides specific counters and gauges for tracking authentication failures, successful logins, and RADIUS server response times to validate access control infrastructure health.

The Remote Authentication Dial In User Service (RADIUS) Client MIB for the Juniper enterprise.
Main OID:
juniRadiusClientMIB.1.3.6.1.4.1.4874.2.2.19
396
Objects
Active
Status
4
Dependencies

Imported Objects

SNMPv2-TC
SNMPv2-SMI
SNMPv2-CONF
Juniper-MIBs

Objects

396 total
Object Name
juniRadiusClientMIBThe Remote Authentication Dial In User Service (RADIUS) Client MIB for the Juniper enterprise.
MODULE-IDENTITY
.1.3.6.1.4.1.4874.2.2.19
juniRadiusClientObjects
OBJECT IDENTIFIER
.1.3.6.1.4.1.4874.2.2.19.1
juniRadiusGeneralClient
OBJECT IDENTIFIER
.1.3.6.1.4.1.4874.2.2.19.1.1
juniRadiusClientIdentifierThe NAS-Identifier of the RADIUS client.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.1
juniRadiusClientAlgorithmThe algorithm used by the client when multiple authentication/accounting servers are configured: direct Use servers in order of precedence, each time beginning with the highest precedence server and proceeding to lower precedence servers if the the RADIUS request fails, until the request succeeds or all servers have been tried. roundRobin Use servers in round-robin order, each time beginning with the next round-robin-ordered server and proceeding cyclically through servers if the RADIUS request fails, until the request succeeds or all servers have been tried.rw
Enumeration
.1.3.6.1.4.1.4874.2.2.19.1.1.2
juniRadiusClientSourceAddressThe source address used by the RADIUS client in requests to the RADIUS server. The RADIUS server returns responses from this address. Setting this object to 0.0.0.0 will reset the value to its default.rw
IpAddress
.1.3.6.1.4.1.4874.2.2.19.1.1.3
juniRadiusClientUdpChecksumEnables/disables the checksum calculations on RADIUS UDP packets.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.4
juniRadiusClientNasIdentifierThe identifier used by the client for the value of NAS-Identifier attribute (number 32) in access and accounting requests. The default is to use the system name.rw
DisplayString
.1.3.6.1.4.1.4874.2.2.19.1.1.5
juniRadiusClientDslPortTypeThe value to use in the NAS-Port-Type RADIUS Attribute (attribute number 61) for DSL interfaces in the RADIUS access and accounting messages: virtual Used for Virtual interfaces. sdsl Used for Symmetric DSL. adsl-cap Used for Asymmetric DSL, Carrierless Amplitude Phase Modulation. adsl-dmt Used for Asymmetric DSL, Discrete Multi-Tone. idsl Used for ISDN Digital Subscriber Line. xdsl Used for Digital Subscriber Line of unknown type.rw
Enumeration
.1.3.6.1.4.1.4874.2.2.19.1.1.6
juniRadiusClientTunnelAccountingEnables/disables the tunnel accounting feature, which causes the system to send tunnel and session accounting requests.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.7
juniRadiusClientAcctSessionIdFormatThe format used by the client for the Acct-Session-ID attribute (attribute number 44): decimal Use an ASCII decimal value only in the Acct-Session-ID attribute. description Use an ASCII description value which includes the interface type (i.e. ATM), slot, port, and circuit number (VPI and VCI for ATM), and a hexidecimal value in the Acct-Session-ID attribute.rw
Enumeration
.1.3.6.1.4.1.4874.2.2.19.1.1.8
juniRadiusClientNasPortFormatThe format used by the client for the NAS-Port attribute (attribute number 5): xssssppp In the NAS-Port attribute (attribute 5) use format of 0 bit, followed by 4 bits for the slot number, 3 bits for the port number, and finally, the circuit number in the remaining bits. ssssxppp In the NAS-Port attribute (attribute 5) use format of 4 bits for the slot number, followed by a 0 bit, 3 bits for the port number and finally, the circuit number in the remaining bits.rw
Enumeration
.1.3.6.1.4.1.4874.2.2.19.1.1.9
juniRadiusClientCallingStationDelimiterThe character use as for delimiting fields in the Calling-Station-ID attribute (attribute 31, from RFC 2865) sent by the client. The default value is '#'.rw
DisplayString
.1.3.6.1.4.1.4874.2.2.19.1.1.10
juniRadiusClientEthernetPortTypeThe value to use in the NAS-Port-Type RADIUS Attribute (attribute number 61) for Ethernet interfaces in the RADIUS access and accounting messages: ethernet Used for Ethernet interfaces. virtual Used for Virtual interfaces.rw
Enumeration
.1.3.6.1.4.1.4874.2.2.19.1.1.11
juniRadiusClientIncludeIpAddrInAcctStartEnables/disables the inclusion of the Framed-IP-Address attribute in the RADIUS Acct-Start packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.12
juniRadiusClientIncludeAcctSessionIdInAccessReqEnables/disables the inclusion of the Acct-Session-ID attribute in the RADIUS Access-Request packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.13
juniRadiusClientRolloverEnables/disables the rollover to next server on receipt of access-reject.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.14
juniRadiusClientCallingStationIdFormatThe format used by the client for the Calling-Station-ID attribute (attribute number 31): delimited In the Calling-Station-ID attribute (attribute 31) use the format '<delimiter><BAS name><delimiter> <interface description><delimiter><layer 2 identifier>'. fixedFomat In the Calling-Station-ID attribute (attribute 31) use the format of 4 bytes for the host name (truncated if needed), 2 digits of slot, 1 digit of port, 3 digits of VPI, followed by 5 digits of VCI. fixedFormatAdapterEmbedded In the Calling-Station-ID attribute (attribute 31) use the format of 4 bytes for the host name (truncated if needed), 1 digit of slot, 1 digit of adapter, 1 digit of port, 3 digits of VPI, followed by 5 digits of VCI. fixedFormatAdapterNewField In the Calling-Station-ID attribute (attribute 31) use the format of 4 bytes for the host name (truncated if needed), 2 digits of slot, 1 digit of adapter, 2 digits of port, 3 digits of VPI, followed by 5 digits of VCI. fixedFormatStacked In the Calling-Station-ID attribute (attribute 31) use the format of 4 bytes for the host name (truncated if needed), 2 digits of slot, 1 digit of port, 4 digits of SVLAN ID and 4 digits of VLAN ID only in the case of Ethernet fixedFormatAdapterEmbeddedStacked In the Calling-Station-ID attribute (attribute 31) use the format of 4 bytes for the host name (truncated if needed), 1 digit of slot, 1 digit of adapter, 1 digit of port, 4 digits of SVLAN ID and 4 digits of VLAN ID only in the case of Ethernet fixedFormatAdapterNewFieldStacked In the Calling-Station-ID attribute (attribute 31) use the format of 4 bytes for the host name (truncated if needed), 2 digits of slot, 1 digit of adapter, 2 digits of port, 4 digits of SVLAN ID and 4 digits of VLAN ID only in the case of Ethernetrw
Enumeration
.1.3.6.1.4.1.4874.2.2.19.1.1.15
juniRadiusClientNasIpAddrUseThe value used by the client for the NAS-IP-Addr attribute (attribute number 4): normal Use the ERX IP address value in the NAS-IP-Addr attribute (attribute 4). tunnelClientEndpoint Use the Tunnel Client's address value in the NAS-IP-Addr attribute (attribute 4) for tunnel users.rw
Enumeration
.1.3.6.1.4.1.4874.2.2.19.1.1.16
juniRadiusClientIncludeAcctTunnelConnectionInAccessReqEnables/disables the inclusion of the Acct-Tunnel-Connection attribute in the RADIUS Access-Request packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.17
juniRadiusClientIncludeCalledStationIdInAccessReqEnables/disables the inclusion of the Called-Station-ID attribute in the RADIUS Access-Request packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.18
juniRadiusClientIncludeCallingStationIdInAccessReqEnables/disables the inclusion of the Calling-Station-ID attribute in the RADIUS Access-Request packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.19
juniRadiusClientIncludeConnectInfoInAccessReqEnables/disables the inclusion of the Connect-Info attribute in the RADIUS Access-Request packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.20
juniRadiusClientIncludeNasIdentifierInAccessReqEnables/disables the inclusion of the NAS-Identifier attribute in the RADIUS Access-Request packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.21
juniRadiusClientIncludeNasPortInAccessReqEnables/disables the inclusion of the NAS-Port attribute in the RADIUS Access-Request packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.22
juniRadiusClientIncludeNasPortIdInAccessReqEnables/disables the inclusion of the NAS-Port-ID attribute in the RADIUS Access-Request packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.23
juniRadiusClientIncludeNasPortTypeInAccessReqEnables/disables the inclusion of the NAS-Port-Type attribute in the RADIUS Access-Request packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.24
juniRadiusClientIncludePppoeDescriptionInAccessReqEnables/disables the inclusion of the PPPoE-Description (VSA) attribute in the RADIUS Access-Request packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.25
juniRadiusClientIncludeTunnelClientAuthIdInAccessReqEnables/disables the inclusion of the Tunnel-Client-Auth-Id attribute in the RADIUS Access-Request packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.26
juniRadiusClientIncludeTunnelClientEndpointInAccessReqEnables/disables the inclusion of the Tunnel-Client-Endpoint attribute in the RADIUS Access-Request packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.27
juniRadiusClientIncludeTunnelMediumTypeInAccessReqEnables/disables the inclusion of the Tunnel-Medium attribute in the RADIUS Access-Request packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.28
juniRadiusClientIncludeTunnelServerAttributesInAccessReqEnables/disables the inclusion of the Tunnel-Server attributes (Tunnel attributes for a PPP session terminated on the LNS) in the RADIUS Access-Request packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.29
juniRadiusClientIncludeTunnelServerAuthIdInAccessReqEnables/disables the inclusion of the Tunnel-Server-Auth-Id attribute in the RADIUS Access-Request packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.30
juniRadiusClientIncludeTunnelServerEndpointInAccessReqEnables/disables the inclusion of the Tunnel-Server-Endpoint attribute in the RADIUS Access-Request packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.31
juniRadiusClientIncludeTunnelTypeInAccessReqEnables/disables the inclusion of the Tunnel-Type attribute in the RADIUS Access-Request packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.32
juniRadiusClientIncludeAcctTunnelConnectionInAcctStartEnables/disables the inclusion of the Acct-Tunnel-Connection attribute in the RADIUS Accounting-Start packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.33
juniRadiusClientIncludeCalledStationIdInAcctStartEnables/disables the inclusion of the Called-Station-ID attribute in the RADIUS Accounting-Start packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.34
juniRadiusClientIncludeCallingStationIdInAcctStartEnables/disables the inclusion of the Calling-Station-ID attribute in the RADIUS Accounting-Start packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.35
juniRadiusClientIncludeClassInAcctStartEnables/disables the inclusion of the Class attribute in the RADIUS Accounting-Start packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.36
juniRadiusClientIncludeConnectInfoInAcctStartEnables/disables the inclusion of the Connect-Info attribute in the RADIUS Accounting-Start packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.37
juniRadiusClientIncludeEgressPolicyNameInAcctStartEnables/disables the inclusion of the Egress-Policy-Name (VSA) attribute in the RADIUS Accounting-Start packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.38
juniRadiusClientIncludeEventTimestampInAcctStartEnables/disables the inclusion of the Event-Timestamp attribute in the RADIUS Accounting-Start packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.39
juniRadiusClientIncludeFramedCompressionInAcctStartEnables/disables the inclusion of the Framed-Compression attribute in the RADIUS Accounting-Start packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.40
juniRadiusClientIncludeFramedIpNetmaskInAcctStartEnables/disables the inclusion of the Framed-IP-Netmask attribute in the RADIUS Accounting-Start packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.41
juniRadiusClientIncludeIngressPolicyNameInAcctStartEnables/disables the inclusion of the Ingress-Policy-Name (VSA) attribute in the RADIUS Accounting-Start packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.42
juniRadiusClientIncludeNasIdentifierInAcctStartEnables/disables the inclusion of the NAS-Identifier attribute in the RADIUS Accounting-Start packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.43
juniRadiusClientIncludeNasPortInAcctStartEnables/disables the inclusion of the NAS-Port attribute in the RADIUS Accounting-Start packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.44
juniRadiusClientIncludeNasPortIdInAcctStartEnables/disables the inclusion of the NAS-Port-ID attribute in the RADIUS Accounting-Start packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.45
juniRadiusClientIncludeNasPortTypeInAcctStartEnables/disables the inclusion of the NAS-Port-Type attribute in the RADIUS Accounting-Start packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.46
juniRadiusClientIncludePppoeDescriptionInAcctStartEnables/disables the inclusion of the PPPoE-Description (VSA) attribute in the RADIUS Accounting-Start packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.47
juniRadiusClientIncludeTunnelAssignmentIdInAcctStartEnables/disables the inclusion of the Tunnel-Assignment-Id attribute in the RADIUS Accounting-Start packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.48
juniRadiusClientIncludeTunnelClientAuthIdInAcctStartEnables/disables the inclusion of the Tunnel-Client-Auth-Id attribute in the RADIUS Accounting-Start packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.49
juniRadiusClientIncludeTunnelClientEndpointInAcctStartEnables/disables the inclusion of the Tunnel-Client-Endpoint attribute in the RADIUS Accounting-Start packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.50
juniRadiusClientIncludeTunnelMediumTypeInAcctStartEnables/disables the inclusion of the Tunnel-Medium attribute in the RADIUS Accounting-Start packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.51
juniRadiusClientIncludeTunnelPreferenceInAcctStartEnables/disables the inclusion of the Tunnel-Preference attribute in the RADIUS Accounting-Start packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.52
juniRadiusClientIncludeTunnelServerAttributesInAcctStartEnables/disables the inclusion of the Tunnel-Server attributes (Tunnel attributes for a PPP session terminated on the LNS) in the RADIUS Accounting-Start packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.53
juniRadiusClientIncludeTunnelServerAuthIdInAcctStartEnables/disables the inclusion of the Tunnel-Server-Auth-Id attribute in the RADIUS Accounting-Start packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.54
juniRadiusClientIncludeTunnelServerEndpointInAcctStartEnables/disables the inclusion of the Tunnel-Server-Endpoint attribute in the RADIUS Accounting-Start packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.55
juniRadiusClientIncludeTunnelTypeInAcctStartEnables/disables the inclusion of the Tunnel-Type attribute in the RADIUS Accounting-Start packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.56
juniRadiusClientIncludeAcctTunnelConnectionInAcctStopEnables/disables the inclusion of the Acct-Tunnel-Connection attribute in the RADIUS Accounting-Stop packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.57
juniRadiusClientIncludeCalledStationIdInAcctStopEnables/disables the inclusion of the Called-Station-ID attribute in the RADIUS Accounting-Stop packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.59
juniRadiusClientIncludeCallingStationIdInAcctStopEnables/disables the inclusion of the Calling-Station-ID attribute in the RADIUS Accounting-Stop packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.60
juniRadiusClientIncludeClassInAcctStopEnables/disables the inclusion of the Class attribute in the RADIUS Accounting-Stop packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.61
juniRadiusClientIncludeConnectInfoInAcctStopEnables/disables the inclusion of the Connect-Info attribute in the RADIUS Accounting-Stop packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.62
juniRadiusClientIncludeEgressPolicyNameInAcctStopEnables/disables the inclusion of the Egress-Policy-Name (VSA) attribute in the RADIUS Accounting-Stop packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.63
juniRadiusClientIncludeEventTimestampInAcctStopEnables/disables the inclusion of the Event-Timestamp attribute in the RADIUS Accounting-Stop packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.64
juniRadiusClientIncludeFramedCompressionInAcctStopEnables/disables the inclusion of the Framed-Compression attribute in the RADIUS Accounting-Stop packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.65
juniRadiusClientIncludeFramedIpNetmaskInAcctStopEnables/disables the inclusion of the Framed-IP-Netmask attribute in the RADIUS Accounting-Stop packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.66
juniRadiusClientIncludeIngressPolicyNameInAcctStopEnables/disables the inclusion of the Ingress-Policy-Name (VSA) attribute in the RADIUS Accounting-Stop packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.67
juniRadiusClientIncludeInputGigawordsInAcctStopEnables/disables the inclusion of the Input-Gigawords attribute in the RADIUS Accounting-Stop packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.68
juniRadiusClientIncludeNasIdentifierInAcctStopEnables/disables the inclusion of the NAS-Identifier attribute in the RADIUS Accounting-Stop packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.69
juniRadiusClientIncludeNasPortInAcctStopEnables/disables the inclusion of the NAS-Port attribute in the RADIUS Accounting-Stop packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.70
juniRadiusClientIncludeNasPortIdInAcctStopEnables/disables the inclusion of the NAS-Port-ID attribute in the RADIUS Accounting-Stop packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.71
juniRadiusClientIncludeNasPortTypeInAcctStopEnables/disables the inclusion of the NAS-Port-Type attribute in the RADIUS Accounting-Stop packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.72
juniRadiusClientIncludeOutputGigawordsInAcctStopEnables/disables the inclusion of the Output-Gigawords attribute in the RADIUS Accounting-Stop packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.73
juniRadiusClientIncludePppoeDescriptionInAcctStopEnables/disables the inclusion of the PPPoE-Description (VSA) attribute in the RADIUS Accounting-Stop packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.74
juniRadiusClientIncludeTunnelAssignmentIdInAcctStopEnables/disables the inclusion of the Tunnel-Assignment-Id attribute in the RADIUS Accounting-Stop packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.75
juniRadiusClientIncludeTunnelClientAuthIdInAcctStopEnables/disables the inclusion of the Tunnel-Client-Auth-Id attribute in the RADIUS Accounting-Stop packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.76
juniRadiusClientIncludeTunnelClientEndpointInAcctStopEnables/disables the inclusion of the Tunnel-Client-Endpoint attribute in the RADIUS Accounting-Stop packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.77
juniRadiusClientIncludeTunnelMediumTypeInAcctStopEnables/disables the inclusion of the Tunnel-Medium attribute in the RADIUS Accounting-Stop packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.78
juniRadiusClientIncludeTunnelPreferenceInAcctStopEnables/disables the inclusion of the Tunnel-Preference attribute in the RADIUS Accounting-Stop packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.79
juniRadiusClientIncludeTunnelServerAttributesInAcctStopEnables/disables the inclusion of the Tunnel-Server attributes (Tunnel attributes for a PPP session terminated on the LNS) in the RADIUS Accounting-Stop packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.80
juniRadiusClientIncludeTunnelServerAuthIdInAcctStopEnables/disables the inclusion of the Tunnel-Server-Auth-Id attribute in the RADIUS Accounting-Stop packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.81
juniRadiusClientIncludeTunnelServerEndpointInAcctStopEnables/disables the inclusion of the Tunnel-Server-Endpoint attribute in the RADIUS Accounting-Stop packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.82
juniRadiusClientIncludeTunnelTypeInAcctStopEnables/disables the inclusion of the Tunnel-Type attribute in the RADIUS Accounting-Stop packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.83
juniRadiusClientIncludeInputGigapktsInAcctStopEnables/disables the inclusion of the Input-Gigapkts attribute in the RADIUS Accounting-Stop packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.84
juniRadiusClientIncludeOutputGigapktsInAcctStopEnables/disables the inclusion of the Output-Gigapkts attribute in the RADIUS Accounting-Stop packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.85
juniRadiusClientIgnoreFramedIpNetmaskEnables/disables ignoring the Framed-IP-Netmask attribute in the RADIUS Access-Accept packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.86
juniRadiusClientIgnoreAtmCategoryEnables/disables ignoring the ATM-Category (vsa) attribute in the RADIUS Access-Accept packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.87
juniRadiusClientIgnoreAtmMbsEnables/disables ignoring the ATM-MBS (vsa) attribute in the RADIUS Access-Accept packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.88
juniRadiusClientIgnoreAtmPcrEnables/disables ignoring the ATM-PCR (vsa) attribute in the RADIUS Access-Accept packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.89
juniRadiusClientIgnoreAtmScrEnables/disables ignoring the ATM-SCR-Or-CBR (vsa) attribute in the RADIUS Access-Accept packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.90
juniRadiusClientIgnoreEgressPolicyNameEnables/disables ignoring the Egress-Policy-Name (vsa) attribute in the RADIUS Access-Accept packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.91
juniRadiusClientIgnoreIngressPolicyNameEnables/disables ignoring the Ingress-Policy-Name (vsa) attribute in the RADIUS Access-Accept packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.92
juniRadiusClientIgnoreVirtualRouterEnables/disables ignoring the Virtual-Router (vsa) attribute in the RADIUS Access-Accept packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.93
juniRadiusClientTrapOnAuthServerUnavailableEnables/disables sending an SNMP trap for the condition that a specific RADIUS authentication server times out.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.94
juniRadiusClientTrapOnAcctServerUnavailableEnables/disables sending an SNMP trap for the condition that a specific RADIUS accounting server times out.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.95
juniRadiusClientTrapOnNoAuthServerAvailableEnables/disables sending an SNMP trap for the condition that all of the configured RADIUS authentication servers (in a virtual router context) time out.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.96
juniRadiusClientTrapOnNoAcctServerAvailableEnables/disables sending an SNMP trap for the condition that all of the configured RADIUS accounting servers (in a virtual router context) time out.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.97
juniRadiusClientTrapOnAuthServerAvailableEnables/disables sending an SNMP trap for the condition that a specific RADIUS authentication server has sent a response after being declared unavailable.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.98
juniRadiusClientTrapOnAcctServerAvailableEnables/disables sending an SNMP trap for the condition that a specific RADIUS accounting server has sent a response after being declared unavailable.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.99
juniRadiusClientPppoeNasPortFormatThe format used by the client for the Nas-Port attribute (attribute number 5) for PPPoE interfaces: none Use the format specified in juniRadiusClientNasPortFormat unique Use a unique value that is not related to the interfacerw
Enumeration
.1.3.6.1.4.1.4874.2.2.19.1.1.100
juniRadiusClientIncludeTunnelInterfaceIdInAccessReqEnables/disables the inclusion of the Tunnel-Interface-Id (VSA) attribute in the RADIUS Access-Request packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.101
juniRadiusClientIncludeTunnelInterfaceIdInAcctStartEnables/disables the inclusion of the Tunnel-Interface-Id (VSA) in the RADIUS Accounting-Start packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.102
juniRadiusClientIncludeTunnelInterfaceIdInAcctStopEnables/disables the inclusion of the Tunnel-Interface-Id (VSA) in the RADIUS Accounting-Stop packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.103
juniRadiusClientIncludeL2tpPppDisconnectCauseInAcctStopEnables/disables the inclusion of the L2TP PPP Disconnect Cause (VSA) in the RADIUS Accounting-Stop packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.104
juniRadiusClientVlanNasPortFormatThe format used by the client for the Nas-Port attribute (attribute number 5) for VLAN interfaces: none Include the VLAN ID if configured stacked Include both the SVLAN ID and VLAN ID if configuredrw
Enumeration
.1.3.6.1.4.1.4874.2.2.19.1.1.105
juniRadiusClientIncludeAcctMultiSessionIdInAccessReqEnables/disables the inclusion of the Accounting Multilink Session ID in the RADIUS Access-Req packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.106
juniRadiusClientIncludeAcctMultiSessionIdInAcctStartEnables/disables the inclusion of the Accounting Multilink Session ID in the RADIUS Accounting-Start packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.107
juniRadiusClientIncludeAcctMultiSessionIdInAcctStopEnables/disables the inclusion of the Accounting Multilink Session ID in the RADIUS Accounting-Stop packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.108
juniRadiusClientIncludeAscendNumInMultilinkInAccessReqEnables/disables the inclusion of the Ascend Num In Multilink attribute in the RADIUS Access-Req packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.109
juniRadiusClientIncludeAscendNumInMultilinkInAcctStartEnables/disables the inclusion of the Ascend Num In Multilink attribute in the RADIUS Accounting-Start packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.110
juniRadiusClientIncludeAscendNumInMultilinkInAcctStopEnables/disables the inclusion of the Ascend Num In Multilink attribute in the RADIUS Accounting-Stop packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.111
juniRadiusClientConnectInfoFormatThe format used by the client for the Connect-Info attribute (attribute number 77): default The Connect-Info Attribute is generated from the underlying interface id string. l2tpConnectSpeed The Connect-Info Attribute is generated from the received l2tp connect speed AVPs. The format is in bits per second: <tx-connect-speed>[/<rx-connect-speed>] The receive connect speed is included if non zero and different from the transmit connect speed. l2tpConnectSpeedRXWhenEqual The Connect-Info Attribute is generated from the received l2tp connect speed AVPs. The format is in bits per second: <tx-connect-speed>/<rx-connect-speed> The receive connect speed is included if non-zero.rw
Enumeration
.1.3.6.1.4.1.4874.2.2.19.1.1.112
juniRadiusClientIncludeProfileServiceDescrInAccessReqEnables/disables the inclusion of the AAA profile service description attribute in the RADIUS Access-Req packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.113
juniRadiusClientIncludeProfileServiceDescrInAcctStartEnables/disables the inclusion of the AAA profile service description attribute in the RADIUS Accounting-Start packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.114
juniRadiusClientIncludeProfileServiceDescrInAcctStopEnables/disables the inclusion of the AAA profile service description attribute in the RADIUS Accounting-Stop packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.115
juniRadiusClientIncludeAcctAuthenticInAcctOnEnables/disables the inclusion of the acct-authentic attribute in the RADIUS Accounting-On packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.116
juniRadiusClientIncludeAcctDelayTimeInAcctOnEnables/disables the inclusion of the acct-delay-time attribute in the RADIUS Accounting-On packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.117
juniRadiusClientIncludeAcctSessionIdInAcctOnEnables/disables the inclusion of the acct-session-id attribute in the RADIUS Accounting-On packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.118
juniRadiusClientIncludeNasIdentifierInAcctOnEnables/disables the inclusion of the nas-identifier attribute in the RADIUS Accounting-On packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.119
juniRadiusClientIncludeEventTimestampInAcctOnEnables/disables the inclusion of the event-timestamp attribute in the RADIUS Accounting-On packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.120
juniRadiusClientIncludeAcctAuthenticInAcctOffEnables/disables the inclusion of the acct-authentic attribute in the RADIUS Accounting-Off packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.121
juniRadiusClientIncludeAcctDelayTimeInAcctOffEnables/disables the inclusion of the acct-delay-time attribute in the RADIUS Accounting-Off packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.122
juniRadiusClientIncludeAcctSessionIdInAcctOffEnables/disables the inclusion of the acct-session-id attribute in the RADIUS Accounting-Off packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.123
juniRadiusClientIncludeAcctTerminateCauseInAcctOffEnables/disables the inclusion of the acct-terminate-cause attribute in the RADIUS Accounting-Off packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.124
juniRadiusClientIncludeNasIdentifierInAcctOffEnables/disables the inclusion of the nas-identifier attribute in the RADIUS Accounting-Off packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.125
juniRadiusClientIncludeEventTimestampInAcctOffEnables/disables the inclusion of the event-timestamp attribute in the RADIUS Accounting-Off packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.126
juniRadiusClientIncludeDhcpOptionsInAccessReqEnables/disables the inclusion of the Dhcp-Options (vsa) attribute in the RADIUS Access-Request packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.127
juniRadiusClientIncludeDhcpMacAddressInAccessReqEnables/disables the inclusion of the Dhcp-Mac-Addresss (vsa) attribute in the RADIUS Access-Request packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.128
juniRadiusClientIncludeDhcpGiAddressInAccessReqEnables/disables the inclusion of the Dhcp-Gi-Address (vsa) attribute in the RADIUS Access-Request packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.129
juniRadiusClientIncludeDhcpOptionsInAcctStartEnables/disables the inclusion of the Dhcp-Options (vsa) attribute in the RADIUS Accounting-Start packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.130
juniRadiusClientIncludeDhcpMacAddressInAcctStartEnables/disables the inclusion of the Dhcp-Mac-Addresss (vsa) attribute in the RADIUS Accounting-Start packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.131
juniRadiusClientIncludeDhcpGiAddressInAcctStartEnables/disables the inclusion of the Dhcp-Gi-Address (vsa) attribute in the RADIUS Accounting-Start packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.132
juniRadiusClientIncludeDhcpOptionsInAcctStopEnables/disables the inclusion of the Dhcp-Options (vsa) attribute in the RADIUS Accounting-Stop packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.133
juniRadiusClientIncludeDhcpMacAddressInAcctStopEnables/disables the inclusion of the Dhcp-Mac-Addresss (vsa) attribute in the RADIUS Accounting-Stop packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.134
juniRadiusClientIncludeDhcpGiAddressInAcctStopEnables/disables the inclusion of the Dhcp-Gi-Address (vsa) attribute in the RADIUS Accounting-Stop packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.135
juniRadiusClientNasPortIdOverrideRemoteCircuitIdEnables/disables overriding the Nas-Port-Id with the PPPoe Remote Circuit Id.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.136
juniRadiusClientCallingStationIdOverrideRemoteCircuitIdEnables/disables overriding the Calling-Station-Id with the PPPoe Remote Circuit Id.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.137
juniRadiusClientIncludeMlpppBundleNameInAccessReqEnables/disables the inclusion of the MLPPP-Bundle-Name (VSA) attribute in the RADIUS Access-Request packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.138
juniRadiusClientIncludeMlpppBundleNameInAcctStartEnables/disables the inclusion of the MLPPP-Bundle-Name (VSA) in the RADIUS Accounting-Start packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.139
juniRadiusClientIncludeMlpppBundleNameInAcctStopEnables/disables the inclusion of the MLPPP-Bundle-Name (VSA) in the RADIUS Accounting-Stop packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.140
juniRadiusClientOverrideNasInfoEnables/disables the overriding nas-ip-address and nas-identifier by values from authentication virual router. If juniRadiusClientNasIpAddrUse is not 'normal', then nas-ip-address is not overriden.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.141
juniRadiusClientIncludeInterfaceDescriptionInAccessReqEnables/disables the inclusion of the interface description attribute in the RADIUS Access-Req packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.142
juniRadiusClientIncludeInterfaceDescriptionInAcctStartEnables/disables the inclusion of the interface description attribute in the RADIUS Accounting-Start packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.143
juniRadiusClientIncludeInterfaceDescriptionInAcctStopEnables/disables the inclusion of the interface description attribute in the RADIUS Accounting-Stop packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.144
juniRadiusClientAtmNasPortFormatThe format used by the client for the Nas-Port attribute (attribute number 5) for ATM interfaces: none Use the format specified in juniRadiusClientNasPortFormat extended Use the extended format determined by atm nas-port field width values.rw
Enumeration
.1.3.6.1.4.1.4874.2.2.19.1.1.145
juniRadiusClientNasPortFieldWidthAtmSlotSpecifies the number of bits in the NAS-Port attribute (attribute 5) to be used for the slot of the atm interface when the value of juniRadiusClientAtmNasPortFormat is extended.rw
Integer32
.1.3.6.1.4.1.4874.2.2.19.1.1.146
juniRadiusClientNasPortFieldWidthAtmAdapterSpecifies the number of bits in the NAS-Port attribute (attribute 5) to be used for the adapter of the atm interface when the value of juniRadiusClientAtmNasPortFormat is extended.rw
Integer32
.1.3.6.1.4.1.4874.2.2.19.1.1.147
juniRadiusClientNasPortFieldWidthAtmPortSpecifies the number of bits in the NAS-Port attribute (attribute 5) to be used for the port of the atm interface when the value of juniRadiusClientAtmNasPortFormat is extended.rw
Integer32
.1.3.6.1.4.1.4874.2.2.19.1.1.148
juniRadiusClientNasPortFieldWidthAtmVpiSpecifies the number of bits in the NAS-Port attribute (attribute 5) to be used for the vpi of the atm interface when the value of juniRadiusClientAtmNasPortFormat is extended.rw
Integer32
.1.3.6.1.4.1.4874.2.2.19.1.1.149
juniRadiusClientNasPortFieldWidthAtmVciSpecifies the number of bits in the NAS-Port attribute (attribute 5) to be used for the vci of the atm interface when the value of juniRadiusClientAtmNasPortFormat is extended.rw
Integer32
.1.3.6.1.4.1.4874.2.2.19.1.1.150
juniRadiusClientEthernetNasPortFormatThe format used by the client for the Nas-Port attribute (attribute number 5) for Ethernet interfaces: none Use the format specified in juniRadiusClientNasPortFormat extended Use the extended format determined by ethernet nas-port field width values.rw
Enumeration
.1.3.6.1.4.1.4874.2.2.19.1.1.151
juniRadiusClientNasPortFieldWidthEthernetSlotSpecifies the number of bits in the NAS-Port attribute (attribute 5) to be used for the slot of the ethernet interface when the value of juniRadiusClientEthernetNasPortFormat is extended.rw
Integer32
.1.3.6.1.4.1.4874.2.2.19.1.1.152
juniRadiusClientNasPortFieldWidthEthernetAdapterSpecifies the number of bits in the NAS-Port attribute (attribute 5) to be used for the adapter of the ethernet interface when the value of juniRadiusClientEthernetNasPortFormat is extended.rw
Integer32
.1.3.6.1.4.1.4874.2.2.19.1.1.153
juniRadiusClientNasPortFieldWidthEthernetPortSpecifies the number of bits in the NAS-Port attribute (attribute 5) to be used for the port of the ethernet interface when the value of juniRadiusClientEthernetNasPortFormat is extended.rw
Integer32
.1.3.6.1.4.1.4874.2.2.19.1.1.154
juniRadiusClientNasPortFieldWidthEthernetSVlanSpecifies the number of bits in the NAS-Port attribute (attribute 5) to be used for the svlan of the ethernet interface when the value of juniRadiusClientEthernetNasPortFormat is extended.rw
Integer32
.1.3.6.1.4.1.4874.2.2.19.1.1.155
juniRadiusClientNasPortFieldWidthEthernetVlanSpecifies the number of bits in the NAS-Port attribute (attribute 5) to be used for the vlan of the ethernet interface when the value of juniRadiusClientEthernetNasPortFormat is extended.rw
Integer32
.1.3.6.1.4.1.4874.2.2.19.1.1.156
juniRadiusClientRemoteCircuitIdFormatThe set of PPPoE Remote Circuit Id components configured. Each octet in this object contains one of the values defined in the JuniRadiusClientRemoteCircuitIdFormatComponents TEXTUAL-CONVENTION. Only following combinations are permited: agentCircuitId remoteCircuitId agentCircutiId, remoteCircuitId nasIdentifier, agentCircuitId nasIdentifier, remoteCircuitId nasIdentifier, agentCircutiId, remoteCircuitId dsl-format-1.rw
OCTET STRING
.1.3.6.1.4.1.4874.2.2.19.1.1.157
juniRadiusClientRemoteCircuitIdDelimiterThe character use as for delimiting fields in the PPPoE Remote Circuit ID. The default value is '#'.rw
DisplayString
.1.3.6.1.4.1.4874.2.2.19.1.1.158
juniRadiusClientIncludeL2cAccessLoopParametersInAccessReqEnables/disables the inclusion of the l2c-access-loop-parameters (VSA) in the RADIUS Access-Request packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.159
juniRadiusClientIncludeL2cDownStreamDataInAccessReqEnables/disables the inclusion of the l2c-down-stream-data (VSA) in the RADIUS Access-Request packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.160
juniRadiusClientIncludeL2cUpStreamDataInAccessReqEnables/disables the inclusion of the l2c-up-stream-data (VSA) in the RADIUS Access-Request packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.161
juniRadiusClientIncludeL2cDownStreamDataInAcctStartEnables/disables the inclusion of the l2c-down-stream-data (VSA) in the RADIUS Accounting-Start packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.162
juniRadiusClientIncludeL2cUpStreamDataInAcctStartEnables/disables the inclusion of the l2c-up-stream-data (VSA) in the RADIUS Accounting-Start packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.163
juniRadiusClientIncludeL2cDownStreamDataInAcctStopEnables/disables the inclusion of the l2c-down-stream-data (VSA) in the RADIUS Accounting-Stop packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.164
juniRadiusClientIncludeL2cUpStreamDataInAcctStopEnables/disables the inclusion of the l2c-up-stream-data (VSA) in the RADIUS Accounting-Stop packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.165
juniRadiusClientIncludeDslForumAttributesInAccessReqEnables/disables the inclusion of the DSL Forum attributes (VSA) in the RADIUS Access-Request packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.166
juniRadiusClientIncludeDslForumAttributesInAcctStartEnables/disables the inclusion of the DSL Forum attributes (VSA) in the RADIUS Accounting-Start packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.167
juniRadiusClientIncludeDslForumAttributesInAcctStopEnables/disables the inclusion of the DSL Forum attributes (VSA) in the RADIUS Accounting-Stop packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.168
juniRadiusClientIncludeL2cAccessLoopCircuitIdInAccessReqEnables/disables the inclusion of l2cd-acc-loop-cir-id (VSA) in the RADIUS Access-Request packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.169
juniRadiusClientIncludeL2cAccessAggrCircuitIdBinaryInAccessReqEnables/disables the inclusion of l2cd-acc-aggr-cir-id-bin (VSA) in the RADIUS Access-Request packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.170
juniRadiusClientIncludeL2cAccessAggrCircuitIdAsciiInAccessReqEnables/disables the inclusion of l2cd-acc-aggr-cir-id-asc (VSA) in the RADIUS Access-Request packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.171
juniRadiusClientIncludeL2cActualDataRateUstrInAccessReqEnables/disables the inclusion of l2cd-act-data-rate-up (VSA) in the RADIUS Access-Request packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.172
juniRadiusClientIncludeL2cActualDataRateDstrInAccessReqEnables/disables the inclusion of l2cd-act-data-rate-dn (VSA) in the RADIUS Access-Request packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.173
juniRadiusClientIncludeL2cMinimumDataRateUstrInAccessReqEnables/disables the inclusion of l2cd-min-data-rate-up (VSA) in the RADIUS Access-Request packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.174
juniRadiusClientIncludeL2cMinimumDataRateDstrInAccessReqEnables/disables the inclusion of l2cd-in-data-rate-dn (VSA) in the RADIUS Access-Request packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.175
juniRadiusClientIncludeL2cAttainDataRateUstrInAccessReqEnables/disables the inclusion of l2cd-att-data-rate-up (VSA) in the RADIUS Access-Request packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.176
juniRadiusClientIncludeL2cAttainDataRateDstrInAccessReqEnables/disables the inclusion of l2cd-att-data-rate-dn (VSA) in the RADIUS Access-Request packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.177
juniRadiusClientIncludeL2cMaximumDataRateUstrInAccessReqEnables/disables the inclusion of l2cd-max-data-rate-up (VSA) in the RADIUS Access-Request packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.178
juniRadiusClientIncludeL2cMaximumDataRateDstrInAccessReqEnables/disables the inclusion of l2cd-max-data-rate-dn (VSA) in the RADIUS Access-Request packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.179
juniRadiusClientIncludeL2cMinLowPowerDataRateUstrInAccessReqEnables/disables the inclusion of l2cd-min-lp-data-rate-up (VSA) in the RADIUS Access-Request packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.180
juniRadiusClientIncludeL2cMinLowPowerDataRateDstrInAccessReqEnables/disables the inclusion of l2cd-min-lp-data-rate-dn (VSA) in the RADIUS Access-Request packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.181
juniRadiusClientIncludeL2cMaxInterleavingDelayUstrInAccessReqEnables/disables the inclusion of l2cd-max-interlv-delay-up (VSA) in the RADIUS Access-Request packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.182
juniRadiusClientIncludeL2cActInterleavingDelayUstrInAccessReqEnables/disables the inclusion of l2cd-act-interlv-delay-up (VSA) in the RADIUS Access-Request packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.183
juniRadiusClientIncludeL2cMaxInterleavingDelayDstrInAccessReqEnables/disables the inclusion of l2cd-max-interlv-delay-dn (VSA) in the RADIUS Access-Request packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.184
juniRadiusClientIncludeL2cActInterleavingDelayDstrInAccessReqEnables/disables the inclusion of l2cd-act-interlv-delay-dn (VSA) in the RADIUS Access-Request packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.185
juniRadiusClientIncludeL2cDslLineStateInAccessReqEnables/disables the inclusion of l2cd-dsl-line-state (VSA) in the RADIUS Access-Request packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.186
juniRadiusClientIncludeL2cDslTypeInAccessReqEnables/disables the inclusion of l2cd-dsl-type (VSA) in the RADIUS Access-Request packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.187
juniRadiusClientIncludeL2cAccessLoopCircuitIdInAcctStartEnables/disables the inclusion of l2cd-acc-loop-cir-id (VSA) in the RADIUS Acct-Start packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.188
juniRadiusClientIncludeL2cAccessAggrCircuitIdBinaryInAcctStartEnables/disables the inclusion of l2cd-acc-aggr-cir-id-bin (VSA) in the RADIUS Acct-Start packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.189
juniRadiusClientIncludeL2cAccessAggrCircuitIdAsciiInAcctStartEnables/disables the inclusion of l2cd-acc-aggr-cir-id-asc (VSA) in the RADIUS Acct-Start packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.190
juniRadiusClientIncludeL2cActualDataRateUstrInAcctStartEnables/disables the inclusion of l2cd-act-data-rate-up (VSA) in the RADIUS Acct-Start packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.191
juniRadiusClientIncludeL2cActualDataRateDstrInAcctStartEnables/disables the inclusion of l2cd-act-data-rate-dn (VSA) in the RADIUS Acct-Start packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.192
juniRadiusClientIncludeL2cMinimumDataRateUstrInAcctStartEnables/disables the inclusion of l2cd-min-data-rate-up (VSA) in the RADIUS Acct-Start packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.193
juniRadiusClientIncludeL2cMinimumDataRateDstrInAcctStartEnables/disables the inclusion of l2cd-in-data-rate-dn (VSA) in the RADIUS Acct-Start packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.194
juniRadiusClientIncludeL2cAttainDataRateUstrInAcctStartEnables/disables the inclusion of l2cd-att-data-rate-up (VSA) in the RADIUS Acct-Start packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.195
juniRadiusClientIncludeL2cAttainDataRateDstrInAcctStartEnables/disables the inclusion of l2cd-att-data-rate-dn (VSA) in the RADIUS Acct-Start packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.196
juniRadiusClientIncludeL2cMaximumDataRateUstrInAcctStartEnables/disables the inclusion of l2cd-max-data-rate-up (VSA) in the RADIUS Acct-Start packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.197
juniRadiusClientIncludeL2cMaximumDataRateDstrInAcctStartEnables/disables the inclusion of l2cd-max-data-rate-dn (VSA) in the RADIUS Acct-Start packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.198
juniRadiusClientIncludeL2cMinLowPowerDataRateUstrInAcctStartEnables/disables the inclusion of l2cd-min-lp-data-rate-up (VSA) in the RADIUS Acct-Start packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.199
juniRadiusClientIncludeL2cMinLowPowerDataRateDstrInAcctStartEnables/disables the inclusion of l2cd-min-lp-data-rate-dn (VSA) in the RADIUS Acct-Start packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.200
juniRadiusClientIncludeL2cMaxInterleavingDelayUstrInAcctStartEnables/disables the inclusion of l2cd-max-interlv-delay-up (VSA) in the RADIUS Acct-Start packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.201
juniRadiusClientIncludeL2cActInterleavingDelayUstrInAcctStartEnables/disables the inclusion of l2cd-act-interlv-delay-up (VSA) in the RADIUS Acct-Start packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.202
juniRadiusClientIncludeL2cMaxInterleavingDelayDstrInAcctStartEnables/disables the inclusion of l2cd-max-interlv-delay-dn (VSA) in the RADIUS Acct-Start packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.203
juniRadiusClientIncludeL2cActInterleavingDelayDstrInAcctStartEnables/disables the inclusion of l2cd-act-interlv-delay-dn (VSA) in the RADIUS Acct-Start packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.204
juniRadiusClientIncludeL2cDslLineStateInAcctStartEnables/disables the inclusion of l2cd-dsl-line-state (VSA) in the RADIUS Acct-Start packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.205
juniRadiusClientIncludeL2cDslTypeInAcctStartEnables/disables the inclusion of l2cd-dsl-type (VSA) in the RADIUS Acct-Start packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.206
juniRadiusClientIncludeL2cAccessLoopCircuitIdInAcctStopEnables/disables the inclusion of l2cd-acc-loop-cir-id (VSA) in the RADIUS Acct-Stop packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.207
juniRadiusClientIncludeL2cAccessAggrCircuitIdBinaryInAcctStopEnables/disables the inclusion of l2cd-acc-aggr-cir-id-bin (VSA) in the RADIUS Acct-Stop packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.208
juniRadiusClientIncludeL2cAccessAggrCircuitIdAsciiInAcctStopEnables/disables the inclusion of l2cd-acc-aggr-cir-id-asc (VSA) in the RADIUS Acct-Stop packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.209
juniRadiusClientIncludeL2cActualDataRateUstrInAcctStopEnables/disables the inclusion of l2cd-act-data-rate-up (VSA) in the RADIUS Acct-Stop packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.210
juniRadiusClientIncludeL2cActualDataRateDstrInAcctStopEnables/disables the inclusion of l2cd-act-data-rate-dn (VSA) in the RADIUS Acct-Stop packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.211
juniRadiusClientIncludeL2cMinimumDataRateUstrInAcctStopEnables/disables the inclusion of l2cd-min-data-rate-up (VSA) in the RADIUS Acct-Stop packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.212
juniRadiusClientIncludeL2cMinimumDataRateDstrInAcctStopEnables/disables the inclusion of l2cd-in-data-rate-dn (VSA) in the RADIUS Acct-Stop packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.213
juniRadiusClientIncludeL2cAttainDataRateUstrInAcctStopEnables/disables the inclusion of l2cd-att-data-rate-up (VSA) in the RADIUS Acct-Stop packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.214
juniRadiusClientIncludeL2cAttainDataRateDstrInAcctStopEnables/disables the inclusion of l2cd-att-data-rate-dn (VSA) in the RADIUS Acct-Stop packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.215
juniRadiusClientIncludeL2cMaximumDataRateUstrInAcctStopEnables/disables the inclusion of l2cd-max-data-rate-up (VSA) in the RADIUS Acct-Stop packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.216
juniRadiusClientIncludeL2cMaximumDataRateDstrInAcctStopEnables/disables the inclusion of l2cd-max-data-rate-dn (VSA) in the RADIUS Acct-Stop packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.217
juniRadiusClientIncludeL2cMinLowPowerDataRateUstrInAcctStopEnables/disables the inclusion of l2cd-min-lp-data-rate-up (VSA) in the RADIUS Acct-Stop packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.218
juniRadiusClientIncludeL2cMinLowPowerDataRateDstrInAcctStopEnables/disables the inclusion of l2cd-min-lp-data-rate-dn (VSA) in the RADIUS Acct-Stop packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.219
juniRadiusClientIncludeL2cMaxInterleavingDelayUstrInAcctStopEnables/disables the inclusion of l2cd-max-interlv-delay-up (VSA) in the RADIUS Acct-Stop packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.220
juniRadiusClientIncludeL2cActInterleavingDelayUstrInAcctStopEnables/disables the inclusion of l2cd-act-interlv-delay-up (VSA) in the RADIUS Acct-Stop packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.221
juniRadiusClientIncludeL2cMaxInterleavingDelayDstrInAcctStopEnables/disables the inclusion of l2cd-max-interlv-delay-dn (VSA) in the RADIUS Acct-Stop packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.222
juniRadiusClientIncludeL2cActInterleavingDelayDstrInAcctStopEnables/disables the inclusion of l2cd-act-interlv-delay-dn (VSA) in the RADIUS Acct-Stop packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.223
juniRadiusClientIncludeL2cDslLineStateInAcctStopEnables/disables the inclusion of l2cd-dsl-line-state (VSA) in the RADIUS Acct-Stop packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.224
juniRadiusClientIncludeL2cDslTypeInAcctStopEnables/disables the inclusion of l2cd-dsl-type (VSA) in the RADIUS Acct-Stop packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.225
juniRadiusClientIncludeInterfaceIdInAcctStartEnables/disables the inclusion of framed-interface-id (96) in the RADIUS Acct-Start packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.226
juniRadiusClientIncludeIpv6PrefixInAcctStartEnables/disables the inclusion of framed-ipv6-prefix (97) in the RADIUS Acct-Start packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.227
juniRadiusClientIncludeInterfaceIdInAcctStopEnables/disables the inclusion of framed-interface-id (96) in the RADIUS Acct-Stop packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.228
juniRadiusClientIncludeIpAddrInAcctStopEnables/disables the inclusion of framed-ip-address (8) in the RADIUS Acct-Stop packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.229
juniRadiusClientIncludeIpv6PrefixInAcctStopEnables/disables the inclusion of framed-ipv6-prefix (97) in the RADIUS Acct-Stop packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.230
juniRadiusClientIncludeDownStreamCalculatedQosRateInAccessReqEnables/disables the inclusion of downstream-calculated-qos-rate (VSA) in the RADIUS Access-Request packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.231
juniRadiusClientIncludeUpStreamCalculatedQosRateInAccessReqEnables/disables the inclusion of upstream-calculated-qos-rate (VSA) in the RADIUS Access-Request packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.232
juniRadiusClientIncludeDownStreamCalculatedQosRateInAcctStartEnables/disables the inclusion of downstream-calculated-qos-rate (VSA) in the RADIUS Acct-Start packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.233
juniRadiusClientIncludeUpStreamCalculatedQosRateInAcctStartEnables/disables the inclusion of upstream-calculated-qos-rate (VSA) in the RADIUS Acct-Start packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.234
juniRadiusClientIncludeDownStreamCalculatedQosRateInAcctStopEnables/disables the inclusion of downstream-calculated-qos-rate (VSA) in the RADIUS Acct-Stop packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.235
juniRadiusClientIncludeUpStreamCalculatedQosRateInAcctStopEnables/disables the inclusion of upstream-calculated-qos-rate (VSA) in the RADIUS Acct-Stop packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.236
juniRadiusClientIgnorePppoeMaxSessionEnables/disables ignoring the PPPoE Max Session (vsa) attribute in the RADIUS Access-Accept packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.237
juniRadiusClientIncludeIpv6AccountingInAcctStopEnables/disables the inclusion of the IPv6 Accounting (VSA) attributes in the RADIUS Accounting-Stop packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.238
juniRadiusClientIncludeDelegatedIpv6PrefixInAcctStartEnables/disables the inclusion of delegated-ipv6-prefix (123) in the RADIUS Acct-Start packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.239
juniRadiusClientIncludeDelegatedIpv6PrefixInAcctStopEnables/disables the inclusion of delegated-ipv6-prefix (123) in the RADIUS Acct-Stop packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.240
juniRadiusClientIncludeFramedIpv6PoolInAcctStartEnables/disables the inclusion of framed-ipv6-pool (100) in the RADIUS Acct-Start packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.241
juniRadiusClientIncludeFramedIpv6PoolInAcctStopEnables/disables the inclusion of framed-ipv6-pool (100) in the RADIUS Acct-Stop packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.242
juniRadiusClientIncludeFramedIpv6RouteInAcctStartEnables/disables the inclusion of framed-ipv6-route (99) in the RADIUS Acct-Start packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.243
juniRadiusClientIncludeFramedIpv6RouteInAcctStopEnables/disables the inclusion of framed-ipv6-route (99) in the RADIUS Acct-Stop packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.244
juniRadiusClientIncludeIpv6LocalInterfaceInAcctStartEnables/disables the inclusion of ipv6-local-interface (vsa) in the RADIUS Acct-Start packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.245
juniRadiusClientIncludeIpv6LocalInterfaceInAcctStopEnables/disables the inclusion of ipv6-local-interface (vsa) in the RADIUS Acct-Stop packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.246
juniRadiusClientIncludeIpv6NdRaPrefixInAcctStartEnables/disables the inclusion of ipv6-nd-ra-prefix (vsa) in the RADIUS Acct-Start packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.247
juniRadiusClientIncludeIpv6NdRaPrefixInAcctStopEnables/disables the inclusion of ipv6-nd-ra-prefix (vsa) in the RADIUS Acct-Stop packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.248
juniRadiusClientIncludeIpv6PrimaryDnsInAcctStartEnables/disables the inclusion of ipv6-primary-dns (vsa) in the RADIUS Acct-Start packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.249
juniRadiusClientIncludeIpv6PrimaryDnsInAcctStopEnables/disables the inclusion of ipv6-primary-dns (vsa) in the RADIUS Acct-Stop packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.250
juniRadiusClientIncludeIpv6SecondaryDnsInAcctStartEnables/disables the inclusion of ipv6-secondary-dns (vsa) in the RADIUS Acct-Start packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.251
juniRadiusClientIncludeIpv6SecondaryDnsInAcctStopEnables/disables the inclusion of ipv6-secondary-dns (vsa) in the RADIUS Acct-Stop packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.252
juniRadiusClientIncludeIpv6VirtualRouterInAcctStartEnables/disables the inclusion of ipv6-virtual-router (vsa) in the RADIUS Acct-Start packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.253
juniRadiusClientIncludeIpv6VirtualRouterInAcctStopEnables/disables the inclusion of ipv6-virtual-router (vsa) in the RADIUS Acct-Stop packet.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.1.254
juniRadiusAuthClient
OBJECT IDENTIFIER
.1.3.6.1.4.1.4874.2.2.19.1.2
juniRadiusAuthClientInvalidServerAddressesThe number of RADIUS Access-Response packets received from unknown addresses.ro
Counter32
.1.3.6.1.4.1.4874.2.2.19.1.2.1
juniRadiusAuthClientServerTableThe (conceptual) table listing the RADIUS authentication servers with which the client shares a secret.
SEQUENCE OF JuniRadiusAuthClientServerEntry
.1.3.6.1.4.1.4874.2.2.19.1.2.2
juniRadiusAuthClientServerEntryAn entry (conceptual row) representing a RADIUS authentication server with which the client shares a secret.
JuniRadiusAuthClientServerEntry
.1.3.6.1.4.1.4874.2.2.19.1.2.2.1
juniRadiusAuthClientServerAddressThe IP address of the RADIUS authentication server referred to in this table entry. A value of 0.0.0.0 indicates this entry is not in use.
IpAddress
.1.3.6.1.4.1.4874.2.2.19.1.2.2.1.1
juniRadiusAuthClientServerPortNumberThe UDP port the client is using to send requests to this server.ro
Integer32
.1.3.6.1.4.1.4874.2.2.19.1.2.2.1.2
juniRadiusAuthClientRoundTripTimeThe time interval (in hundredths of seconds) between the most recent Access-Reply/Access-Challenge and the Access-Request that matched it from this RADIUS authentication server.ro
TimeTicks (SNMPv2-SMI)
.1.3.6.1.4.1.4874.2.2.19.1.2.2.1.3
juniRadiusAuthClientAccessRequestsThe number of RADIUS Access-Request packets sent to this server. This does not include retransmissions.ro
Counter32
.1.3.6.1.4.1.4874.2.2.19.1.2.2.1.4
juniRadiusAuthClientAccessRetransmissionsThe number of RADIUS Access-Request packets retransmitted to this RADIUS authentication server.ro
Counter32
.1.3.6.1.4.1.4874.2.2.19.1.2.2.1.5
juniRadiusAuthClientAccessAcceptsThe number of RADIUS Access-Accept packets (valid or invalid) received from this server.ro
Counter32
.1.3.6.1.4.1.4874.2.2.19.1.2.2.1.6
juniRadiusAuthClientAccessRejectsThe number of RADIUS Access-Reject packets (valid or invalid) received from this server.ro
Counter32
.1.3.6.1.4.1.4874.2.2.19.1.2.2.1.7
juniRadiusAuthClientAccessChallengesThe number of RADIUS Access-Challenge packets (valid or invalid) received from this server.ro
Counter32
.1.3.6.1.4.1.4874.2.2.19.1.2.2.1.8
juniRadiusAuthClientMalformedAccessResponsesThe number of malformed RADIUS Access-Response packets received from this server. Malformed packets include packets with an invalid length. Bad authenticators or signature attributes or unknown types are not included as malformed access responses.ro
Counter32
.1.3.6.1.4.1.4874.2.2.19.1.2.2.1.9
juniRadiusAuthClientBadAuthenticatorsThe number of RADIUS Access-Response packets containing invalid authenticators or signature attributes received from this server.ro
Counter32
.1.3.6.1.4.1.4874.2.2.19.1.2.2.1.10
juniRadiusAuthClientPendingRequestsThe number of RADIUS Access-Request packets destined for this server that have not yet timed out or received a response. This variable is incremented when an Access-Request is sent and decremented due to receipt of an Access-Accept, Access-Reject or Access-Challenge, a timeout or retransmission.ro
Gauge32
.1.3.6.1.4.1.4874.2.2.19.1.2.2.1.11
juniRadiusAuthClientTimeoutsThe number of authentication timeouts to this server. After a timeout the client may retry to the same server, send to a different server, or give up. A retry to the same server is counted as a retransmit as well as a timeout. A send to a different server is counted as a Request as well as a timeout.ro
Counter32
.1.3.6.1.4.1.4874.2.2.19.1.2.2.1.12
juniRadiusAuthClientUnknownTypesThe number of RADIUS packets of unknown type which were received from this server on the authentication port.ro
Counter32
.1.3.6.1.4.1.4874.2.2.19.1.2.2.1.13
juniRadiusAuthClientPacketsDroppedThe number of RADIUS packets of which were received from this server on the authentication port and dropped for some other reason.ro
Counter32
.1.3.6.1.4.1.4874.2.2.19.1.2.2.1.14
juniRadiusAuthClientCfgServerTableThe (conceptual) table listing the RADIUS authentication servers with which the client shares a secret.
SEQUENCE OF JuniRadiusAuthClientCfgServerEntry
.1.3.6.1.4.1.4874.2.2.19.1.2.3
juniRadiusAuthClientCfgServerEntryAn entry (conceptual row) representing a RADIUS authentication server with which the client shares a secret.
JuniRadiusAuthClientCfgServerEntry
.1.3.6.1.4.1.4874.2.2.19.1.2.3.1
juniRadiusAuthClientCfgServerAddressThe IP address of the RADIUS authentication server referred to in this table entry.
IpAddress
.1.3.6.1.4.1.4874.2.2.19.1.2.3.1.1
juniRadiusAuthClientCfgServerPortNumberThe UDP port the client is using to send requests to this server.rw
Integer32
.1.3.6.1.4.1.4874.2.2.19.1.2.3.1.2
juniRadiusAuthClientCfgKeyThe secret (RADIUS authenticator) used by the client during exchanges with this authentication server. The default is a zero-length string, indicating no authenticator is used.rw
DisplayString
.1.3.6.1.4.1.4874.2.2.19.1.2.3.1.3
juniRadiusAuthClientCfgTimeoutIntervalThe interval between retransmissions of a request to this authentication server.rw
Integer32
.1.3.6.1.4.1.4874.2.2.19.1.2.3.1.4
juniRadiusAuthClientCfgRetriesThe maximum number of times to resend a request to this authentication server (in addition to the original request), before resorting to the server specified in the next entry.rw
Integer32
.1.3.6.1.4.1.4874.2.2.19.1.2.3.1.5
juniRadiusAuthClientCfgMaxPendingRequestsThe maximum number of outstanding requests this server can support.rw
Integer32
.1.3.6.1.4.1.4874.2.2.19.1.2.3.1.6
juniRadiusAuthClientCfgRowStatusSupports 'createAndGo' and 'destroy' only.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.2.3.1.7
juniRadiusAuthClientCfgPrecedenceRelative precedence of this server with respect to other servers configured in this table. Lower values correspond to higher precedence. Precedence is assigned by the device, in order of entry creation, from higher to lower precedence.ro
Integer32
.1.3.6.1.4.1.4874.2.2.19.1.2.3.1.8
juniRadiusAuthClientCfgDeadTimeThe period of time, in minutes, to ignore this server after a request to the server times out (thereby avoiding additional request timeouts for this period, if the server failure persists).rw
Integer32
.1.3.6.1.4.1.4874.2.2.19.1.2.3.1.9
juniRadiusAcctClient
OBJECT IDENTIFIER
.1.3.6.1.4.1.4874.2.2.19.1.3
juniRadiusAcctClientInvalidServerAddressesThe number of RADIUS Accounting-Response packets received from unknown addresses.ro
Counter32
.1.3.6.1.4.1.4874.2.2.19.1.3.1
juniRadiusAcctClientServerTableThe (conceptual) table listing the RADIUS accounting servers with which the client shares a secret.
SEQUENCE OF JuniRadiusAcctClientServerEntry
.1.3.6.1.4.1.4874.2.2.19.1.3.2
juniRadiusAcctClientServerEntryAn entry (conceptual row) representing a RADIUS accounting server with which the client shares a secret.
JuniRadiusAcctClientServerEntry
.1.3.6.1.4.1.4874.2.2.19.1.3.2.1
juniRadiusAcctClientServerAddressThe IP address of the RADIUS accounting server referred to in this table entry. A value of 0.0.0.0 indicates this entry is not in use.
IpAddress
.1.3.6.1.4.1.4874.2.2.19.1.3.2.1.1
juniRadiusAcctClientServerPortNumberThe UDP port the client is using to send requests to this server.ro
Integer32
.1.3.6.1.4.1.4874.2.2.19.1.3.2.1.2
juniRadiusAcctClientRoundTripTimeThe time interval between the most recent Accounting-Response and the Accounting-Request that matched it from this RADIUS accounting server.ro
TimeTicks (SNMPv2-SMI)
.1.3.6.1.4.1.4874.2.2.19.1.3.2.1.3
juniRadiusAcctClientRequestsThe number of RADIUS Accounting-Request packets sent. This does not include retransmissions.ro
Counter32
.1.3.6.1.4.1.4874.2.2.19.1.3.2.1.4
juniRadiusAcctClientRetransmissionsThe number of RADIUS Accounting-Request packets retransmitted to this RADIUS accounting server. Retransmissions include retries where the Identifier and Acct-Delay have been updated, as well as those in which they remain the same.ro
Counter32
.1.3.6.1.4.1.4874.2.2.19.1.3.2.1.5
juniRadiusAcctClientResponsesThe number of RADIUS packets received on the accounting port from this server.ro
Counter32
.1.3.6.1.4.1.4874.2.2.19.1.3.2.1.6
juniRadiusAcctClientMalformedResponsesThe number of malformed RADIUS Accounting-Response packets received from this server. Malformed packets include packets with an invalid length. Bad authenticators and unknown types are not included as malformed accounting responses.ro
Counter32
.1.3.6.1.4.1.4874.2.2.19.1.3.2.1.7
juniRadiusAcctClientBadAuthenticatorsThe number of RADIUS Accounting-Response packets which contained invalid authenticators received from this server.ro
Counter32
.1.3.6.1.4.1.4874.2.2.19.1.3.2.1.8
juniRadiusAcctClientPendingRequestsThe number of RADIUS Accounting-Request packets sent to this server that have not yet timed out or received a response. This variable is incremented when an Accounting-Request is sent and decremented due to receipt of an Accounting-Response, a timeout or a retransmission.ro
Gauge32
.1.3.6.1.4.1.4874.2.2.19.1.3.2.1.9
juniRadiusAcctClientTimeoutsThe number of accounting timeouts to this server. After a timeout the client may retry to the same server, send to a different server, or give up. A retry to the same server is counted as a retransmit as well as a timeout. A send to a different server is counted as an Accounting-Request as well as a timeout.ro
Counter32
.1.3.6.1.4.1.4874.2.2.19.1.3.2.1.10
juniRadiusAcctClientUnknownTypesThe number of RADIUS packets of unknown type which were received from this server on the accounting port.ro
Counter32
.1.3.6.1.4.1.4874.2.2.19.1.3.2.1.11
juniRadiusAcctClientPacketsDroppedThe number of RADIUS packets which were received from this server on the accounting port and dropped for some other reason.ro
Counter32
.1.3.6.1.4.1.4874.2.2.19.1.3.2.1.12
juniRadiusAcctClientStartRequestsThe number of RADIUS Accounting-Start request packets sent. This does not include retransmissions.ro
Counter32
.1.3.6.1.4.1.4874.2.2.19.1.3.2.1.13
juniRadiusAcctClientInterimRequestsThe number of RADIUS Accounting-Interim request packets sent. This does not include retransmissions.ro
Counter32
.1.3.6.1.4.1.4874.2.2.19.1.3.2.1.14
juniRadiusAcctClientStopRequestsThe number of RADIUS Accounting-Stop request packets sent. This does not include retransmissions.ro
Counter32
.1.3.6.1.4.1.4874.2.2.19.1.3.2.1.15
juniRadiusAcctClientStartResponsesThe number of RADIUS accounting-start response packets received on the accounting port from this server.ro
Counter32
.1.3.6.1.4.1.4874.2.2.19.1.3.2.1.16
juniRadiusAcctClientInterimResponsesThe number of RADIUS accounting-interim response packets received on the accounting port from this server.ro
Counter32
.1.3.6.1.4.1.4874.2.2.19.1.3.2.1.17
juniRadiusAcctClientStopResponsesThe number of RADIUS accounting-stop response packets received on the accounting port from this server.ro
Counter32
.1.3.6.1.4.1.4874.2.2.19.1.3.2.1.18
juniRadiusAcctClientRejectRequestsThe number of RADIUS accounting-reject packets sent on the accounting port from this server.ro
Counter32
.1.3.6.1.4.1.4874.2.2.19.1.3.2.1.19
juniRadiusAcctClientRejectResponsesThe number of RADIUS accounting-reject response packets received on the accounting port from this server.ro
Counter32
.1.3.6.1.4.1.4874.2.2.19.1.3.2.1.20
juniRadiusAcctClientCfgServerTableThe (conceptual) table listing the RADIUS accounting servers with which the client shares a secret.
SEQUENCE OF JuniRadiusAcctClientCfgServerEntry
.1.3.6.1.4.1.4874.2.2.19.1.3.3
juniRadiusAcctClientCfgServerEntryAn entry (conceptual row) representing a RADIUS accounting server with which the client shares a secret.
JuniRadiusAcctClientCfgServerEntry
.1.3.6.1.4.1.4874.2.2.19.1.3.3.1
juniRadiusAcctClientCfgServerAddressThe IP address of the RADIUS accounting server referred to in this table entry.
IpAddress
.1.3.6.1.4.1.4874.2.2.19.1.3.3.1.1
juniRadiusAcctClientCfgServerPortNumberThe UDP port the client is using to send requests to this server.rw
Integer32
.1.3.6.1.4.1.4874.2.2.19.1.3.3.1.2
juniRadiusAcctClientCfgKeyThe secret (RADIUS authenticator) used by the client during exchanges with this accounting server. The default is a zero-length string, indicating no authenticator is used.rw
DisplayString
.1.3.6.1.4.1.4874.2.2.19.1.3.3.1.3
juniRadiusAcctClientCfgTimeoutIntervalThe interval between retransmissions of a request to this accounting server.rw
Integer32
.1.3.6.1.4.1.4874.2.2.19.1.3.3.1.4
juniRadiusAcctClientCfgRetriesThe maximum number of times to resend a request to this accounting server (in addition to the original request), before resorting to the server specified in the next entry.rw
Integer32
.1.3.6.1.4.1.4874.2.2.19.1.3.3.1.5
juniRadiusAcctClientCfgMaxPendingRequestsThe maximum number of outstanding requests this server can support.rw
Integer32
.1.3.6.1.4.1.4874.2.2.19.1.3.3.1.6
juniRadiusAcctClientCfgRowStatusSupports 'createAndGo' and 'destroy' only.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.4874.2.2.19.1.3.3.1.7
juniRadiusAcctClientCfgPrecedenceRelative precedence of this server with respect to other servers configured in this table. Lower values correspond to higher precedence. Precedence is assigned by the device, in order of entry creation, from higher to lower precedence.ro
Integer32
.1.3.6.1.4.1.4874.2.2.19.1.3.3.1.8
juniRadiusAcctClientCfgDeadTimeThe period of time, in minutes, to ignore this server after a request to the server times out (thereby avoiding additional request timeouts for this period, if the server failure persists).rw
Integer32
.1.3.6.1.4.1.4874.2.2.19.1.3.3.1.9
juniRadiusClientMIBConformance
OBJECT IDENTIFIER
.1.3.6.1.4.1.4874.2.2.19.2
juniRadiusClientMIBCompliances
OBJECT IDENTIFIER
.1.3.6.1.4.1.4874.2.2.19.2.1
juniRadiusAuthClientComplianceObsolete compliance statement for authentication clients implementing the Juniper RADIUS Client MIB authentication functionality. This statement became obsolete when the juniRadiusClientSourceAddress object was added.obsolete
Unknown
.1.3.6.1.4.1.4874.2.2.19.2.1.1
juniRadiusAcctClientComplianceObsolete compliance statement for accounting clients implementing the Juniper RADIUS Client MIB accounting functionality. This statement became obsolete when the juniRadiusClientSourceAddress object was added.obsolete
Unknown
.1.3.6.1.4.1.4874.2.2.19.2.1.2
juniRadiusAuthClientCompliance2Obsolete compliance statement for authentication clients implementing the Juniper RADIUS Client MIB authentication functionality. This statement became obsolete when new objects were added.obsolete
Unknown
.1.3.6.1.4.1.4874.2.2.19.2.1.3
juniRadiusAcctClientCompliance2Obsolete compliance statement for accounting clients implementing the Juniper RADIUS Client MIB accounting functionality. This statement became obsolete when new objects were added.obsolete
Unknown
.1.3.6.1.4.1.4874.2.2.19.2.1.4
juniRadiusClientComplianceObsolete compliance statement for authentication clients implementing the Juniper RADIUS Client MIB authentication functionality. This statement became obsolete when new B-RAS objects were added.obsolete
Unknown
.1.3.6.1.4.1.4874.2.2.19.2.1.5
juniRadiusClientCompliance2Obsolete compliance statement for authentication clients implementing the Juniper RADIUS Client MIB authentication functionality. This statement became obsolete when new objects were added.obsolete
Unknown
.1.3.6.1.4.1.4874.2.2.19.2.1.6
juniRadiusClientCompliance3Obsolete compliance statement for authentication clients implementing the Juniper RADIUS Client MIB authentication functionality. This statement became obsolete when the juniRadiusClientNasIpAddrUse object was added.obsolete
Unknown
.1.3.6.1.4.1.4874.2.2.19.2.1.7
juniRadiusClientCompliance4Obsolete compliance statement for authentication clients implementing the Juniper RADIUS Client MIB authentication functionality. This statement became obsolete when objects were added to indicate which RADIUS attributes should be included or excluded from RADIUS packets.obsolete
Unknown
.1.3.6.1.4.1.4874.2.2.19.2.1.8
juniRadiusClientCompliance5Obsolete compliance statement for authentication clients implementing the Juniper RADIUS Client MIB authentication functionality. This statement became obsolete when notifications for unavailable RADIUS servers were added.obsolete
Unknown
.1.3.6.1.4.1.4874.2.2.19.2.1.9
juniRadiusClientCompliance6Obsolete compliance statement for authentication clients implementing the Juniper RADIUS Client MIB authentication functionality. This statement became obsolete when attribute-ignore objects were added to the B-RAS group and accounting and authetication servers available notifications were added.obsolete
Unknown
.1.3.6.1.4.1.4874.2.2.19.2.1.10
juniRadiusClientCompliance7Obsolete compliance statement for authentication clients implementing the Juniper RADIUS Client MIB authentication functionality. This statement became obsolete when authentication and accounting objects were added.obsolete
Unknown
.1.3.6.1.4.1.4874.2.2.19.2.1.11
juniRadiusClientCompliance8Obsolete compliance statement for authentication clients implementing the Juniper RADIUS Client MIB authentication functionality. This statement became obsolete when accounting reject counters were added.obsolete
Unknown
.1.3.6.1.4.1.4874.2.2.19.2.1.12
juniRadiusClientCompliance9Obsolete compliance statement for authentication clients implementing the Juniper RADIUS Client MIB authentication functionality. This statement became obsolete when new object was added to the BRAS group to indicate which RADIUS attributes should be included or excluded from RADIUS packets.obsolete
Unknown
.1.3.6.1.4.1.4874.2.2.19.2.1.13
juniRadiusClientCompliance10Obsolete compliance statement for authentication clients implementing the Juniper RADIUS Client MIB authentication functionality. This statement became obsolete when new objects were added to indicate which RADIUS attributes for DHCP VSAs should be included or excluded from RADIUS packets.obsolete
Unknown
.1.3.6.1.4.1.4874.2.2.19.2.1.14
juniRadiusClientCompliance11Obsolete compliance statement for authentication clients implementing the Juniper RADIUS Client MIB authentication functionality.obsolete
Unknown
.1.3.6.1.4.1.4874.2.2.19.2.1.15
juniRadiusClientCompliance12Obsolete compliance statement for authentication clients implementing the Juniper RADIUS Client MIB authentication functionality.obsolete
Unknown
.1.3.6.1.4.1.4874.2.2.19.2.1.16
juniRadiusClientCompliance13Obsolete compliance statement for authentication clients implementing the Juniper RADIUS Client MIB authentication functionality.obsolete
Unknown
.1.3.6.1.4.1.4874.2.2.19.2.1.17
juniRadiusClientCompliance14The compliance statement for authentication clients implementing the Juniper RADIUS Client MIB authentication functionality.obsolete
Unknown
.1.3.6.1.4.1.4874.2.2.19.2.1.18
juniRadiusClientCompliance15Obsolete compliance statement for authentication clients implementing the Juniper RADIUS Client MIB authentication functionality.obsolete
Unknown
.1.3.6.1.4.1.4874.2.2.19.2.1.19
juniRadiusClientCompliance16The compliance statement for authentication clients implementing the Juniper RADIUS Client MIB authentication functionality.obsolete
Unknown
.1.3.6.1.4.1.4874.2.2.19.2.1.20
juniRadiusClientCompliance17The compliance statement for authentication clients implementing the Juniper RADIUS Client MIB authentication functionality.obsolete
Unknown
.1.3.6.1.4.1.4874.2.2.19.2.1.21
juniRadiusClientCompliance18The compliance statement for authentication clients implementing the Juniper RADIUS Client MIB authentication functionality.
Unknown
.1.3.6.1.4.1.4874.2.2.19.2.1.22
juniRadiusClientMIBGroups
OBJECT IDENTIFIER
.1.3.6.1.4.1.4874.2.2.19.2.2
juniRadiusGeneralClientGroupObsolete basic collection of objects providing management of RADIUS Clients. This group became obsolete when juniRadiusClientSourceAddress was added.obsolete
Unknown
.1.3.6.1.4.1.4874.2.2.19.2.2.1
juniRadiusAuthClientGroupObsolete collection of objects providing management of RADIUS Authentication Clients. This group became obsolete when notification objects for an unavailable authentication server were added.obsolete
Unknown
.1.3.6.1.4.1.4874.2.2.19.2.2.2
juniRadiusAcctClientGroupObsolete collection of objects providing management of RADIUS Accounting Clients. This group became obsolete when notification objects for an unavailable accounting server were added.obsolete
Unknown
.1.3.6.1.4.1.4874.2.2.19.2.2.3
juniRadiusGeneralClientGroup2Obsolete basic collection of objects providing management of RADIUS Clients. This group became obsolete when new objects were added.obsolete
Unknown
.1.3.6.1.4.1.4874.2.2.19.2.2.4
juniRadiusBasicClientGroupObsolete collection of objects providing basic management of RADIUS Clients. This group became obsolete when the juniRadiusClientRollover object was added.obsolete
Unknown
.1.3.6.1.4.1.4874.2.2.19.2.2.5
juniRadiusBrasClientGroupObsolete collection of objects providing management of general B-RAS functions for RADIUS Clients. This group became obsolete when new objects were added.obsolete
Unknown
.1.3.6.1.4.1.4874.2.2.19.2.2.6
juniRadiusTunnelClientGroupAn object providing management of tunneling functions for RADIUS Clients.
Unknown
.1.3.6.1.4.1.4874.2.2.19.2.2.7
juniRadiusBrasClientGroup2Obsolete collection of objects providing management of general B-RAS functions for RADIUS Clients. This group became obsolete when the juniRadiusClientCallingStationIdFormat object was added.obsolete
Unknown
.1.3.6.1.4.1.4874.2.2.19.2.2.8
juniRadiusBasicClientGroup2A collection of objects providing basic management of RADIUS Clients.
Unknown
.1.3.6.1.4.1.4874.2.2.19.2.2.9
juniRadiusBrasClientGroup3Obsolete collection of objects providing management of general B-RAS functions for RADIUS Clients. This group became obsolete when the juniRadiusClientNasIpAddrUse object was added.obsolete
Unknown
.1.3.6.1.4.1.4874.2.2.19.2.2.10
juniRadiusBrasClientGroup4Obsolete collection of objects providing management of general B-RAS functions for RADIUS Clients. This group became obsolete when objects were added to indicate which RADIUS attributes should be included or excluded from RADIUS packets.obsolete
Unknown
.1.3.6.1.4.1.4874.2.2.19.2.2.11
juniRadiusBrasClientGroup5Obsolete collection of objects providing management of general B-RAS functions for RADIUS Clients. This group became obsolete when objects to ignore attributes and enable/disable traps were added.obsolete
Unknown
.1.3.6.1.4.1.4874.2.2.19.2.2.12
juniRadiusAuthClientGroup2Obsolete collection of objects providing management of RADIUS Authentication Clients. This group became obsolete when authentication server available notification support was added.obsolete
Unknown
.1.3.6.1.4.1.4874.2.2.19.2.2.13
juniRadiusAcctClientGroup2Obsolete collection of objects providing management of RADIUS Accounting Clients. This group became obsolete when detailed accounting statistics and accounting server available notification support were added.obsolete
Unknown
.1.3.6.1.4.1.4874.2.2.19.2.2.14
juniRadiusAuthNotificationGroupObsolete collection of management notifications for RADUIS authentication events. This group became obsolete when authentication server available notification was added.obsolete
Unknown
.1.3.6.1.4.1.4874.2.2.19.2.2.15
juniRadiusAcctNotificationGroupObsolete collection of management notifications for RADUIS accounting events. This group became obsolete when accounting server available notification was added.obsolete
Unknown
.1.3.6.1.4.1.4874.2.2.19.2.2.16
juniRadiusBrasClientGroup6Obsolete collection of objects providing management of general B-RAS functions for RADIUS Clients. This group became obsolete when objects for PPPoE Nas-Port format were added.obsolete
Unknown
.1.3.6.1.4.1.4874.2.2.19.2.2.17
juniRadiusAuthClientGroup3A collection of objects providing management of RADIUS Authentication Clients.
Unknown
.1.3.6.1.4.1.4874.2.2.19.2.2.18
juniRadiusAcctClientGroup3Obsolete collection of objects providing management of RADIUS Accounting Clients. This group became obsolete when reject counters were added.obsolete
Unknown
.1.3.6.1.4.1.4874.2.2.19.2.2.19
juniRadiusAuthNotificationGroup2Management notifications for RADUIS authentication events.
Unknown
.1.3.6.1.4.1.4874.2.2.19.2.2.20
juniRadiusAcctNotificationGroup2Management notifications for RADUIS accounting events.
Unknown
.1.3.6.1.4.1.4874.2.2.19.2.2.21
juniRadiusBrasClientGroup7Obsolete collection of objects providing management of general B-RAS functions for RADIUS Clients. This group became obsolete when an object for VLAN Nas-Port format was added.obsolete
Unknown
.1.3.6.1.4.1.4874.2.2.19.2.2.22
juniRadiusAcctClientGroup4A collection of objects providing management of RADIUS Accounting Clients.
Unknown
.1.3.6.1.4.1.4874.2.2.19.2.2.23
juniRadiusBrasClientGroup8Obsolete collection of objects providing management of general B-RAS functions for RADIUS Clients. This group became obsolete when new objects were added to indicate which RADIUS attributes should be included or excluded from RADIUS packets.obsolete
Unknown
.1.3.6.1.4.1.4874.2.2.19.2.2.24
juniRadiusBrasClientGroup9A collection of objects providing management of general B-RAS functions for RADIUS Clients.obsolete
Unknown
.1.3.6.1.4.1.4874.2.2.19.2.2.25
juniRadiusBrasClientGroup10A collection of objects providing management of general B-RAS functions for RADIUS Clients. This group became obsolete when new objects were added to enable/disable the overriding of the nas-port-id and/or calling-station-id values with the PPPoE Remote Circuit Id.obsolete
Unknown
.1.3.6.1.4.1.4874.2.2.19.2.2.26
juniRadiusBrasClientGroup11Obsolete collection of objects providing management of general B-RAS functions for RADIUS Clients.obsolete
Unknown
.1.3.6.1.4.1.4874.2.2.19.2.2.27
juniRadiusBrasClientGroup12A collection of objects providing management of general B-RAS functions for RADIUS Clients.obsolete
Unknown
.1.3.6.1.4.1.4874.2.2.19.2.2.28
juniRadiusBrasClientGroup13A collection of objects providing management of general B-RAS functions for RADIUS Clients.obsolete
Unknown
.1.3.6.1.4.1.4874.2.2.19.2.2.29
juniRadiusBrasClientGroup14A collection of objects providing management of general B-RAS functions for RADIUS Clients.obsolete
Unknown
.1.3.6.1.4.1.4874.2.2.19.2.2.30
juniRadiusBrasClientGroup15A collection of objects providing management of general B-RAS functions for RADIUS Clients.obsolete
Unknown
.1.3.6.1.4.1.4874.2.2.19.2.2.31
juniRadiusBrasClientGroup16A collection of objects providing management of general B-RAS functions for RADIUS Clients.obsolete
Unknown
.1.3.6.1.4.1.4874.2.2.19.2.2.32
juniRadiusBrasClientGroup17A collection of objects providing management of general B-RAS functions for RADIUS Clients.obsolete
Unknown
.1.3.6.1.4.1.4874.2.2.19.2.2.33
juniRadiusBrasClientGroup18A collection of objects providing management of general B-RAS functions for RADIUS Clients.obsolete
Unknown
.1.3.6.1.4.1.4874.2.2.19.2.2.34
juniRadiusBrasClientGroup19A collection of objects providing management of general B-RAS functions for RADIUS Clients.obsolete
Unknown
.1.3.6.1.4.1.4874.2.2.19.2.2.35
juniRadiusBrasClientGroup20A collection of objects providing management of general B-RAS functions for RADIUS Clients.
Unknown
.1.3.6.1.4.1.4874.2.2.19.2.2.36
juniRadiusClientTraps
OBJECT IDENTIFIER
.1.3.6.1.4.1.4874.2.2.19.3
juniRadiusClientTrapPrefix
OBJECT IDENTIFIER
.1.3.6.1.4.1.4874.2.2.19.3.0
juniRadiusAuthClientServerUnavailableThis trap will be generated when the requested authentication server is not available.
NOTIFICATION-TYPE
.1.3.6.1.4.1.4874.2.2.19.3.0.1
juniRadiusAuthClientNoServerAvailableThis trap will be generated when all of the requested servers were not available.
NOTIFICATION-TYPE
.1.3.6.1.4.1.4874.2.2.19.3.0.2
juniRadiusAcctClientServerUnavailableThis trap will be generated when the requested accounting server is not available.
NOTIFICATION-TYPE
.1.3.6.1.4.1.4874.2.2.19.3.0.3
juniRadiusAcctClientNoServerAvailableThis trap will be generated when all of the requested servers were not available.
NOTIFICATION-TYPE
.1.3.6.1.4.1.4874.2.2.19.3.0.4
juniRadiusAuthClientServerAvailableThis trap will be generated when the requested authentication server becomes available again after a period of time.
NOTIFICATION-TYPE
.1.3.6.1.4.1.4874.2.2.19.3.0.5
juniRadiusAcctClientServerAvailableThis trap will be generated when the requested accounting server becomes available again after a period of time.
NOTIFICATION-TYPE
.1.3.6.1.4.1.4874.2.2.19.3.0.6
juniRadiusClientTrapControl
OBJECT IDENTIFIER
.1.3.6.1.4.1.4874.2.2.19.4
juniRadiusAuthClientUnavailableServerThe IP address of the RADIUS client's former authentication server that is no longer available. The value of this object is equivalent to the prior value of juniRadiusAuthClientCfgServerAddress.ro
IpAddress
.1.3.6.1.4.1.4874.2.2.19.4.1
juniRadiusAuthClientNextAvailableServerThe next available RADIUS authentication server, replacing the one that is unavailable. The value of this object is equivalent to the current value of juniRadiusAuthClientCfgServerAddress.ro
IpAddress
.1.3.6.1.4.1.4874.2.2.19.4.2
juniRadiusAcctClientUnavailableServerThe IP address of the RADIUS client's former accounting server that is no longer available. The value of this object is equivalent to the prior value of juniRadiusAcctClientCfgServerAddress.ro
IpAddress
.1.3.6.1.4.1.4874.2.2.19.4.3
juniRadiusAcctClientNextAvailableServerThe next available RADIUS accounting server, replacing the one that is unavailable. The value of this object is equivalent to the current value of juniRadiusAcctClientCfgServerAddress.ro
IpAddress
.1.3.6.1.4.1.4874.2.2.19.4.4
juniRadiusAuthClientAvailableServerThe re-available RADIUS authentication server after a period of time called dead-time. The value of this object is equivalent to the current value of juniRadiusAuthClientCfgServerAddress.ro
IpAddress
.1.3.6.1.4.1.4874.2.2.19.4.5
juniRadiusAcctClientAvailableServerThe re-available RADIUS accounting server after a period of time called dead-time. The value of this object is equivalent to the current value of juniRadiusAcctClientCfgServerAddress.ro
IpAddress
.1.3.6.1.4.1.4874.2.2.19.4.6
Juniper-RADIUS-CLIENT-MIB - SNMP MIB Reference | MIBs Explorer