Juniper-UNI-ATM-MIB
AI MIB Summary
The Juniper-UNI-ATM-MIB module provides SNMP management capabilities for Juniper devices configured with Asynchronous Transfer Mode (ATM) user-network interfaces, enabling the monitoring of ATM-specific performance counters, interface states, and VPI/VCI traffic statistics.
The ATM MIB for the Juniper enterprise.
Main OID:
juniAtmMIB.1.3.6.1.4.1.4874.2.2.8
376
Objects
Active
Status
10
Dependencies
Imported Objects
Objects
376 total| Object Name |
|---|
juniAtmMIBThe ATM MIB for the Juniper enterprise. MODULE-IDENTITY .1.3.6.1.4.1.4874.2.2.8 |
juniAtmObjects OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.8.1 |
juniAtmIfLayer OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.8.1.1 |
juniAtmNextIfIndexCoordinate ifIndex value allocation for entries in juniAtmIfTable.
A GET of this object returns the next available ifIndex value to be used
to create an entry in the associated interface table; or zero, if no
valid ifIndex value is available. This object also returns a value of
zero when it is the lexicographic successor of a varbind presented in an
SNMP GETNEXT or GETBULK request, for which circumstance it is assumed
that ifIndex allocation is unintended.
Successive GETs will typically return different values, thus avoiding
collisions among cooperating management clients seeking to create table
entries simultaneously.ro JuniNextIfIndex (Juniper-TC) .1.3.6.1.4.1.4874.2.2.8.1.1.1 |
juniAtmIfTableThis table contains entries for ATM interfaces present in the system. SEQUENCE OF JuniAtmIfEntry .1.3.6.1.4.1.4874.2.2.8.1.1.2 |
juniAtmIfEntryEach entry describes the characteristics of an ATM interface.
Creating/deleting entries in this table causes corresponding entries for
be created/deleted in ifTable/ifXTable/juniIfTable. JuniAtmIfEntry .1.3.6.1.4.1.4874.2.2.8.1.1.2.1 |
juniAtmIfIndexThe ifIndex of the ATM interface. When creating entries in this table,
suitable values for this object are determined by reading
juniAtmNextIfIndex. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4874.2.2.8.1.1.2.1.1 |
juniAtmIfRowStatusControls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroy
To create an entry in this table, the following entry objects MUST be
explicitly configured:
juniAtmIfRowStatus
juniAtmIfLowerIfIndex
In addition, when creating an entry the following condition must hold:
A value for juniAtmIfIndex must have been determined previously, by
reading juniAtmNextIfIndex.
A corresponding entry in ifTable/ifXTable/juniIfTable is created or
destroyed as a result of creating/destroying an entry in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.8.1.1.2.1.2 |
juniAtmIfLowerIfIndexThe ifIndex of an interface over which this ATM interface is to be
layered. A value of zero indicates no layering. An implementation may
choose to require that a nonzero value be configured at entry creation.rw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.4874.2.2.8.1.1.2.1.3 |
juniAtmIfIlmiVpiThe VPI of the ILMI of a major ATM interface.rw AtmVpIdentifier (ATM-TC-MIB) .1.3.6.1.4.1.4874.2.2.8.1.1.2.1.4 |
juniAtmIfIlmiVciThe VCI of the ILMI of a major ATM interface.rw AtmVcIdentifier (ATM-TC-MIB) .1.3.6.1.4.1.4874.2.2.8.1.1.2.1.5 |
juniAtmIfIlmiVcdAn integer identifier for the ILMI, used in conjunction with the
command-line interface.
The value must be unique among VCs configured on the same ATM
interface.rw Integer32 .1.3.6.1.4.1.4874.2.2.8.1.1.2.1.6 |
juniAtmIfIlmiPollFrequencyThe amount of time in seconds between successive transmissions of ILMI
messages on this interface for the purpose of detecting loss of ILMI
connectivity. The distinguished value zero disables ILMI connectivity
procedures on this interface.rw Integer32 .1.3.6.1.4.1.4874.2.2.8.1.1.2.1.7 |
juniAtmIfIlmiAdminStateThe administrative status of ILMI in the ATM interface.rw Enumeration .1.3.6.1.4.1.4874.2.2.8.1.1.2.1.8 |
juniAtmIfUniVersionUse to specify the User Network Interface (UNI) the router should use
when ILMI link auto determination is unsuccesful or ILMI is disabled.rw Enumeration .1.3.6.1.4.1.4874.2.2.8.1.1.2.1.9 |
juniAtmIfOamCellRxAdminStateUse to specify the OAM Cell Receive Administrative state on this
interface.rw Enumeration .1.3.6.1.4.1.4874.2.2.8.1.1.2.1.10 |
juniAtmIfInCellsThe total number of cells received on this major interface.ro Counter64 .1.3.6.1.4.1.4874.2.2.8.1.1.2.1.11 |
juniAtmIfOutCellsThe total number of cells transmitted on this major interface.ro Counter64 .1.3.6.1.4.1.4874.2.2.8.1.1.2.1.12 |
juniAtmIfVcCountThe total number of circuits configured on this interface.ro Integer32 .1.3.6.1.4.1.4874.2.2.8.1.1.2.1.13 |
juniAtmIfMapGroupThe NBMA map group this interface is associated with.rw JuniAtmNbmaMapNameOrNull .1.3.6.1.4.1.4874.2.2.8.1.1.2.1.14 |
juniAtmIfCacAdminStateThe administrative staus of CAC on this ATM major interface.rw JuniEnable (Juniper-TC) .1.3.6.1.4.1.4874.2.2.8.1.1.2.1.15 |
juniAtmIfCacUbrWeightThe bandwidth associated with every UBR and UBR with PCR connection
configured on the ATM major interface. This value is used for CAC
computation. The units are kilo-bits per second (kbps).rw Integer32 .1.3.6.1.4.1.4874.2.2.8.1.1.2.1.16 |
juniAtmIfCacSubscriptionBandwidthThe subscribed bandwidth of the ATM major interface. If this value is
not specified or set to 0, the effective port bandwidth is used. When a
Get operation is performed the current effective bandwidth is returned.
The units are kilo-bits per second (kbps).rw Integer32 .1.3.6.1.4.1.4874.2.2.8.1.1.2.1.17 |
juniAtmIfCacAvailableBandwidthThe available bandwidth in Tx direction of the ATM major interface. As
connections are added or deleted on the interface, this value is
updated. The units are kilo-bits per second (kbps).ro Integer32 .1.3.6.1.4.1.4874.2.2.8.1.1.2.1.18 |
juniAtmIfCacAvailableBandwidthRxThe available bandwidth in Rx direction of the ATM major interface. As
connections are added or deleted on the interface, this value is
updated. The units are kilo-bits per second (kbps).rodeprecated Integer32 .1.3.6.1.4.1.4874.2.2.8.1.1.2.1.19 |
juniAtmIfE164AutoconversionThe status of E164 autoconversion feature in the ATM interface.rwobsolete Enumeration .1.3.6.1.4.1.4874.2.2.8.1.1.2.1.20 |
juniAtmIfE164GatewayThe status of E164 gateway feature in the ATM interface.rwobsolete Enumeration .1.3.6.1.4.1.4874.2.2.8.1.1.2.1.21 |
juniAtmIfE164OneToOneAddrTransThe status of E164 one-to-one address translation feature in the ATM
interface.rwobsolete Enumeration .1.3.6.1.4.1.4874.2.2.8.1.1.2.1.22 |
juniAtmIfOamCellFilterThe type of OAM cells to discard when juniAtmIfOamCellRxAdminState is
set to oamCellAdminStateDisabled. The value oamCellFilterAlarm discards
received OAM AIS and RDI cells. The value oamCellFilterAll discards all
received OAM cells. Note that when juniAtmIfOamCellRxAdminState is set
to oamCellAdminStateEnabled, this object has no effect.rw Enumeration .1.3.6.1.4.1.4874.2.2.8.1.1.2.1.23 |
juniAtmIfCacUsedBandwidthUpperThe most significant 32 bits of the CAC used bandwidth on the ATM major
interface. The least significant 32 bits of the CAC used bandwidth are
specified by juniAtmIfCacUsedBandwidthLower.ro Unsigned32 .1.3.6.1.4.1.4874.2.2.8.1.1.2.1.24 |
juniAtmIfCacUsedBandwidthLowerThe least significant 32 bits of the CAC used bandwidth on the ATM
major interface. The most significant 32 bits of the CAC used bandwidth
are specified by juniAtmIfCacUsedBandwidthUpper.ro Unsigned32 .1.3.6.1.4.1.4874.2.2.8.1.1.2.1.25 |
juniAtmIfAssociatedVcClassIdThe integer identifier of the ATM VC class associated with this ATM interface. A value for this identifier is determined by locating or creating an ATM VC class name in the juniAtmVcClassNameTable. A value of 0 means no VC class association exists for this interface.rw Unsigned32 .1.3.6.1.4.1.4874.2.2.8.1.1.2.1.26 |
juniAtmPvcStatisticsTableThis table contains statistics for PVC entries. SEQUENCE OF JuniAtmPvcStatisticsEntry .1.3.6.1.4.1.4874.2.2.8.1.1.3 |
juniAtmPvcStatisticsEntryEach entry provides statistics on an ATM PVC. JuniAtmPvcStatisticsEntry .1.3.6.1.4.1.4874.2.2.8.1.1.3.1 |
juniAtmPvcStatsIfIndexThe ifIndex of the ATM interface. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4874.2.2.8.1.1.3.1.1 |
juniAtmPvcStatsVpiThe VPI of the ATM VCC used by this ATM interface and PVC. AtmVpIdentifier (ATM-TC-MIB) .1.3.6.1.4.1.4874.2.2.8.1.1.3.1.2 |
juniAtmPvcStatsVciThe VCI of the ATM VCC used by this ATM interface and PVC. AtmVcIdentifier (ATM-TC-MIB) .1.3.6.1.4.1.4874.2.2.8.1.1.3.1.3 |
juniAtmPvcStatsInCellsReceived cells.ro Counter64 .1.3.6.1.4.1.4874.2.2.8.1.1.3.1.4 |
juniAtmPvcStatsInCellOctetsReceived cells octets.ro Counter64 .1.3.6.1.4.1.4874.2.2.8.1.1.3.1.5 |
juniAtmPvcStatsInPacketsReceived AAL PDUs.ro Counter64 .1.3.6.1.4.1.4874.2.2.8.1.1.3.1.6 |
juniAtmPvcStatsInPacketOctetsReceived AAL PDU octets.ro Counter64 .1.3.6.1.4.1.4874.2.2.8.1.1.3.1.7 |
juniAtmPvcStatsOutCellsTransmitted cells.ro Counter64 .1.3.6.1.4.1.4874.2.2.8.1.1.3.1.8 |
juniAtmPvcStatsOutCellOctetsTransmitted cell octets.ro Counter64 .1.3.6.1.4.1.4874.2.2.8.1.1.3.1.9 |
juniAtmPvcStatsOutPacketsTransmitted AAL PDUs.ro Counter64 .1.3.6.1.4.1.4874.2.2.8.1.1.3.1.10 |
juniAtmPvcStatsOutPacketOctetsTransmitted AAL PDU octets.ro Counter64 .1.3.6.1.4.1.4874.2.2.8.1.1.3.1.11 |
juniAtmPvcStatsInCellErrorsReceived cells dropped due to errors.ro Counter32 .1.3.6.1.4.1.4874.2.2.8.1.1.3.1.12 |
juniAtmPvcStatsinPacketErrorsReceived packets dropped due to errors.ro Counter32 .1.3.6.1.4.1.4874.2.2.8.1.1.3.1.13 |
juniAtmPvcStatsOutCellErrorsCells not transmitted due to errors.ro Counter32 .1.3.6.1.4.1.4874.2.2.8.1.1.3.1.14 |
juniAtmPvcStatsOutPacketErrorsPackets not transmitted due to errors.ro Counter32 .1.3.6.1.4.1.4874.2.2.8.1.1.3.1.15 |
juniAtmPvcStatsInPacketDiscardsReceived packets w/o errors discarded.ro Counter32 .1.3.6.1.4.1.4874.2.2.8.1.1.3.1.16 |
juniAtmPvcStatsInPacketOctetDiscardsReceived bytes w/o errors discarded.ro Counter32 .1.3.6.1.4.1.4874.2.2.8.1.1.3.1.17 |
juniAtmPvcStatsInPacketUnknownProtocolReceived packets that are discarded because the interface can not
discern or is not configured to support this protocol.ro Counter32 .1.3.6.1.4.1.4874.2.2.8.1.1.3.1.18 |
juniAtmVpTunnelTableThis table contains entries for ATM VP Tunnels present in the system. SEQUENCE OF JuniAtmVpTunnelEntry .1.3.6.1.4.1.4874.2.2.8.1.1.4 |
juniAtmVpTunnelEntryEach entry describes the characteristics of an ATM VP Tunnel. JuniAtmVpTunnelEntry .1.3.6.1.4.1.4874.2.2.8.1.1.4.1 |
juniAtmVpTunnelIfIndexThe ifIndex of the ATM interface. The value of this object is the same
as the juniAtmIfIndex object in the juniAtmIfTable.
Entries in this table cannot be created unless the underlying ATM
interface entry is created first in the juniAtmIfTable. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4874.2.2.8.1.1.4.1.1 |
juniAtmVpTunnelVpiThe VPI value for this VP tunnel entry. AtmVpIdentifier (ATM-TC-MIB) .1.3.6.1.4.1.4874.2.2.8.1.1.4.1.2 |
juniAtmVpTunnelKbpsThe tunnel rate in kilobits per second (kbps) for this entry.rw Integer32 .1.3.6.1.4.1.4874.2.2.8.1.1.4.1.3 |
juniAtmVpTunnelRowStatusControls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroy
To create an entry in this table, the following entry objects MUST be
explicitly configured:
juniAtmVpTunnelRowStatus
juniAtmVpTunnelKbps
In addition, when creating an entry the following condition must hold:
A correponding juniAtmVpTunnelIfIndex value must have been created
in the juniAtmIfTable previously.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.8.1.1.4.1.4 |
juniAtmVpTunnelServiceCategoryThe ATM service category for the tunnel.rw Enumeration .1.3.6.1.4.1.4874.2.2.8.1.1.4.1.5 |
juniAtmIfCapabilityTableThis table contains entries for ATM interfaces present in the system. SEQUENCE OF JuniAtmIfCapabilityEntry .1.3.6.1.4.1.4874.2.2.8.1.1.5 |
juniAtmIfCapabilityEntryEach entry describes the capabilities of an ATM interface. A
management client can use this table to determine differences in the
configurable level of support across entries in this table. JuniAtmIfCapabilityEntry .1.3.6.1.4.1.4874.2.2.8.1.1.5.1 |
juniAtmIfCapabilityIndexThe ifIndex of the ATM interface. The value of this object is the same
as juniAtmIfIndex in the juniAtmIfTable. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4874.2.2.8.1.1.5.1.1 |
juniAtmIfCapabilityTrafficShapingIndicates whether traffic shaping is supported on this interface;
true(1) indicates that it is, false(2) indicates that it is not.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.8.1.1.5.1.2 |
juniAtmIfCapabilityOamIndicates whether OAM is supported on this interface; true(1) indicates
that it is, false(2) indicates that it is not.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.8.1.1.5.1.3 |
juniAtmIfCapabilityDefaultVcPerVpThe default number of VCs per VP for this interface.ro Integer32 .1.3.6.1.4.1.4874.2.2.8.1.1.5.1.4 |
juniAtmIfCapabilityNumVpiVciBitsThe total range of bits used for constructing VPI/VCI identifiers for
this interface.ro Integer32 .1.3.6.1.4.1.4874.2.2.8.1.1.5.1.5 |
juniAtmIfCapabilityMaxVcdThe maximum configurable value for a VCD on this interface.ro Integer32 .1.3.6.1.4.1.4874.2.2.8.1.1.5.1.6 |
juniAtmIfCapabilityMaxVpiThe maximum configurable value for a VPI on this interface.ro AtmVpIdentifier (ATM-TC-MIB) .1.3.6.1.4.1.4874.2.2.8.1.1.5.1.7 |
juniAtmIfCapabilityMaxVciThe maximum configurable value for a VCI on this interface.ro AtmVcIdentifier (ATM-TC-MIB) .1.3.6.1.4.1.4874.2.2.8.1.1.5.1.8 |
juniAtmIfCapabilityOamCellFilterIndicates whether OAM cell filter is supported on this interface;
true(1) indicates that it is, false(2) indicates that it is not.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.8.1.1.5.1.9 |
juniAtmIfSvcSignallingTableThis table contains entries for extending the juniAtmIfTable for
configuring signalling information for switched virtual connection
(SVC).deprecated SEQUENCE OF JuniAtmIfSvcSignallingEntry .1.3.6.1.4.1.4874.2.2.8.1.1.6 |
juniAtmIfSvcSignallingEntryEach entry provides configuration parameters for ATM signalling on the
interface.deprecated JuniAtmIfSvcSignallingEntry .1.3.6.1.4.1.4874.2.2.8.1.1.6.1 |
juniAtmIfSvcSignallingVpiThe VPI identifier of the ATM circuit used for signalling for this
interface.rwdeprecated AtmVpIdentifier (ATM-TC-MIB) .1.3.6.1.4.1.4874.2.2.8.1.1.6.1.1 |
juniAtmIfSvcSignallingVciThe VCI identifier of the ATM circuit used for signalling for this
interface.rwdeprecated AtmVcIdentifier (ATM-TC-MIB) .1.3.6.1.4.1.4874.2.2.8.1.1.6.1.2 |
juniAtmIfSvcSignallingVcdAn integer identifier for the ATM circuit used for signalling on this
interface.rwdeprecated Integer32 .1.3.6.1.4.1.4874.2.2.8.1.1.6.1.3 |
juniAtmIfSvcSignallingAdminStatusThe administrative status of signalling on the ATM interface.rwdeprecated AtmVorXAdminStatus (ATM-TC-MIB) .1.3.6.1.4.1.4874.2.2.8.1.1.6.1.4 |
juniAtmIfPnniRccTableThis table contains entries for extending the juniAtmIfTable for
configuring PNNI RCC information.obsolete SEQUENCE OF JuniAtmIfPnniRccEntry .1.3.6.1.4.1.4874.2.2.8.1.1.7 |
juniAtmIfPnniRccEntryEach entry provides configuration parameters for PNNI RCC on the
interface.obsolete JuniAtmIfPnniRccEntry .1.3.6.1.4.1.4874.2.2.8.1.1.7.1 |
juniAtmIfPnniRccVpiThe VPI identifier of the ATM circuit used for PNNI RCC on this
interface.rwobsolete AtmVpIdentifier (ATM-TC-MIB) .1.3.6.1.4.1.4874.2.2.8.1.1.7.1.1 |
juniAtmIfPnniRccVciThe VCI identifier of the ATM circuit used for PNNI RCC on this
interface.rwobsolete AtmVcIdentifier (ATM-TC-MIB) .1.3.6.1.4.1.4874.2.2.8.1.1.7.1.2 |
juniAtmIfPnniRccVcdAn integer identifier for the ATM circuit used for PNNI RCC on this
interface.rwobsolete Integer32 .1.3.6.1.4.1.4874.2.2.8.1.1.7.1.3 |
juniAtmIfPnniRccAdminStatusThe administrative status of PNNI on the ATM interface.rwobsolete AtmVorXAdminStatus (ATM-TC-MIB) .1.3.6.1.4.1.4874.2.2.8.1.1.7.1.4 |
juniAtmOamF4FlowEndToEndCfgTableThis table contains entries for F4 OAM end-to-end flows configured. SEQUENCE OF JuniAtmOamF4FlowEndToEndCfgEntry .1.3.6.1.4.1.4874.2.2.8.1.1.8 |
juniAtmOamF4FlowEndToEndCfgEntryEach entry provides configuration parameters for one F4 OAM end-to-end
flow configured for each VPI. JuniAtmOamF4FlowEndToEndCfgEntry .1.3.6.1.4.1.4874.2.2.8.1.1.8.1 |
juniAtmOamF4FlowEndToEndIfIndexThe ifIndex of the ATM interface to configure the F4 OAM end-to-end
flow. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4874.2.2.8.1.1.8.1.1 |
juniAtmOamF4FlowEndToEndVpiSelect the VPI for F4 OAM end-to-end flow configuration. Integer32 .1.3.6.1.4.1.4874.2.2.8.1.1.8.1.2 |
juniAtmOamF4FlowEndToEndLoopbackTimerConfigure the timer for sending the F4 flow end-to-end loopback OAM
cells. Setting this value will enable sending the F4 end cells on the
circuit. It is not allowed to set the value to -1 and whenever it is
read as -1 that means sending end loopback is not enabled. Setting the
loopback timer, other than -1, will enable sending the end cells.rw Integer32 (-1..600) UNITS "seconds" .1.3.6.1.4.1.4874.2.2.8.1.1.8.1.3 |
juniAtmOamF4FlowEndToEndCCSinkEnable/Disable F4 flow end-to-end continuity check sink end point for
this VP.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.8.1.1.8.1.4 |
juniAtmOamF4FlowEndToEndCCSourceEnable/Disable F4 flow end-to-end continuity check source end point for
this VP.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.8.1.1.8.1.5 |
juniAtmOamF4FlowEndToEndRowStatusControls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroy
To create/delete an entry in this table, the following entry objects
MUST be explicitly configured:
juniAtmOamF4FlowEndToEndRowStatus
F4 OAM end loopback and CC tests are mutually exclusive, enabling one
will disable the other automatically. So, it is not allowed either at
the circuit creation time or after the circuit creation to issue a
request to enable end-to-end loopback and CC tests simultaneouly.
Enabling/disabling CC sink and source is one time operation. To
re-enable either CC source and sink in way different to earlier, both
has to be disabled from the previous.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.8.1.1.8.1.6 |
juniAtmOamF4FlowSegmentCfgTableThis table contains entries for F4 OAM Segment flows configured. SEQUENCE OF JuniAtmOamF4FlowSegmentCfgEntry .1.3.6.1.4.1.4874.2.2.8.1.1.9 |
juniAtmOamF4FlowSegmentCfgEntryEach entry provides configuration parameters for one F4 OAM Segment
flow configured for each VPI. JuniAtmOamF4FlowSegmentCfgEntry .1.3.6.1.4.1.4874.2.2.8.1.1.9.1 |
juniAtmOamF4FlowSegmentIfIndexThe ifIndex of the ATM interface to configure the F4 OAM segment flow. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4874.2.2.8.1.1.9.1.1 |
juniAtmOamF4FlowSegmentVpiSelect the VPI for F4 OAM segment flow configuration. Integer32 .1.3.6.1.4.1.4874.2.2.8.1.1.9.1.2 |
juniAtmOamF4FlowSegmentCCSinkEnable/Disable F4 flow segment continuity check sink end point for
this VP.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.8.1.1.9.1.3 |
juniAtmOamF4FlowSegmentCCSourceEnable/Disable F4 flow segment continuity check source end point for
this VP.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.8.1.1.9.1.4 |
juniAtmOamF4FlowSegmentRowStatusControls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroy
To create/delete an entry in this table, the following entry objects
MUST be explicitly configured:
juniAtmOamF4FlowSegmentRowStatus
Enabling/disabling CC sink and source is one time operation. To
re-enable either CC source and sink in way different to earlier, both
has to be disabled from the previous. F4 OAM segment loopback test is
not supported.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.8.1.1.9.1.5 |
juniAtmVpDescrTableThis table contains entries for ATM VP Description present in the
system. The user can configure a description of up to 32 characters for
every VP in the ATM interface. A row exists for every VP on the ATM
interface. These rows get created as soon as the ATM major interface
created. SEQUENCE OF JuniAtmVpDescrEntry .1.3.6.1.4.1.4874.2.2.8.1.1.10 |
juniAtmVpDescrEntryEach entry contains the description of the VP. JuniAtmVpDescrEntry .1.3.6.1.4.1.4874.2.2.8.1.1.10.1 |
juniAtmVpDescriptionThe description for this VP. The default value of this object is null
string.rw SnmpAdminString .1.3.6.1.4.1.4874.2.2.8.1.1.10.1.1 |
juniAtmF4FlowOamEndToEndStatsTableThis table contains entries for F4 flow EndToEnd OAM circuits stats. SEQUENCE OF JuniAtmF4FlowOamEndToEndStatsEntry .1.3.6.1.4.1.4874.2.2.8.1.1.11 |
juniAtmF4FlowOamEndToEndStatsEntryEach entry provides stats for one F4 OAM circuit for each VPI. JuniAtmF4FlowOamEndToEndStatsEntry .1.3.6.1.4.1.4874.2.2.8.1.1.11.1 |
juniAtmF4FlowInOamEndAisCellsReceived end-to-end OAM F4 AIS cells.ro Counter32 UNITS "cells" .1.3.6.1.4.1.4874.2.2.8.1.1.11.1.1 |
juniAtmF4FlowInOamEndRdiCellsReceived end-to-end OAM F4 RDI cells.ro Counter32 UNITS "cells" .1.3.6.1.4.1.4874.2.2.8.1.1.11.1.2 |
juniAtmF4FlowInOamEndCCCellsReceived end-to-end OAM F4 CC cells.ro Counter32 UNITS "cells" .1.3.6.1.4.1.4874.2.2.8.1.1.11.1.3 |
juniAtmF4FlowInOamEndCCActDeActCellsReceived end-to-end OAM F4 activation/de-activation cells.ro Counter32 UNITS "cells" .1.3.6.1.4.1.4874.2.2.8.1.1.11.1.4 |
juniAtmF4FlowInOamEndLoopbackCellsTotal received OAM F4 end-to-end loopback cells. Aggregate of
juniAtmF4FlowEndToEndInLoopbackCmds and
juniAtmF4FlowEndToEndInLoopbackRspsro Counter32 UNITS "cells" .1.3.6.1.4.1.4874.2.2.8.1.1.11.1.5 |
juniAtmF4FlowOutEndRdiCellsTransmitted end-to-end OAM F4 RDI cells.ro Counter32 UNITS "cells" .1.3.6.1.4.1.4874.2.2.8.1.1.11.1.6 |
juniAtmF4FlowOutEndCCCellsTransmitted end-to-end OAM F4 CC cells.ro Counter32 UNITS "cells" .1.3.6.1.4.1.4874.2.2.8.1.1.11.1.7 |
juniAtmF4FlowOutEndCCActDeActCellsTransmitted end-to-end OAM F4 activation/de-activation cells.ro Counter32 UNITS "cells" .1.3.6.1.4.1.4874.2.2.8.1.1.11.1.8 |
juniAtmF4FlowOutEndToEndLoopbackCellsTotal transmitted OAM F4 end-to-end loopback cells. Aggregate of
juniAtmF4FlowEndToEndOutLoopbackCmds and
juniAtmF4FlowEndToEndOutLoopbackRspsro Counter32 UNITS "cells" .1.3.6.1.4.1.4874.2.2.8.1.1.11.1.9 |
juniAtmF4FlowEndActualLoopbackFreqActual end-to-end loopback Frequecy calculated for OAM cells
transmission.ro Integer32 .1.3.6.1.4.1.4874.2.2.8.1.1.11.1.10 |
juniAtmF4FlowEndLastTimeChangedLast time end-to-end F4 OAM flow got changed.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.4874.2.2.8.1.1.11.1.11 |
juniAtmF4FlowOamEndVpOperationStateRepresents the F4 end-to-end OAM flow VP operation states. It can take
one of the following operational state values:
vcAisState - AIS cell received or underlying physical layer
reporting transmission path AIS.
vcRdiState - RDI cell received.
vcDownRetry - OAM loopback failed, using retry frequency to
verify that the VC is really down.
vcUpRetry - OAM loopback successful, using retry frequency
to verify that the VC is really up.
vcUp - OAM loopback successful after up retry
verification.
vcDown - OAM loopback failed after down retry
verification.
vcNotManaged - No verification via loopback cells being
performed.
vpAisState - State when F4 AIS cell is received.
vpRdiState - State when F4 RDI cell is received.
vcInVpRdiState - The data vc is down as a result of VP failure
thorugh F4 Rdi oam cell.
vcInVpAisState - The data vc is down as a result of VP failure
through F4 Ais oam cell.
vcSegmentAisState - Segment AIS cell received.
vcSegRdiState - Segment RDI cell received.ro Enumeration .1.3.6.1.4.1.4874.2.2.8.1.1.11.1.12 |
juniAtmF4FlowOamEndVpAdminStateEnd-to-end VP admin state.ro Enumeration .1.3.6.1.4.1.4874.2.2.8.1.1.11.1.13 |
juniAtmF4FlowEndInOamCellsReceived end-to-end OAM F4 loopback cells.ro Counter32 UNITS "cells" .1.3.6.1.4.1.4874.2.2.8.1.1.11.1.14 |
juniAtmF4FlowEndOutOamCellsTransmitted end-to-end OAM F4 loopback cells.ro Counter32 UNITS "cells" .1.3.6.1.4.1.4874.2.2.8.1.1.11.1.15 |
juniAtmF4FlowEndInOamCellsDroppedReceived end-to-end OAM cells that were dropped.ro Counter32 UNITS "cells" .1.3.6.1.4.1.4874.2.2.8.1.1.11.1.16 |
juniAtmF4FlowEndToEndInLoopbackCmdsReceived OAM F4 end-to-end loopback commands.ro Counter32 UNITS "cells" .1.3.6.1.4.1.4874.2.2.8.1.1.11.1.17 |
juniAtmF4FlowEndToEndInLoopbackRspsReceived OAM F4 end-to-end loopback responses.ro Counter32 UNITS "cells" .1.3.6.1.4.1.4874.2.2.8.1.1.11.1.18 |
juniAtmF4FlowEndToEndOutLoopbackCmdsTransmitted OAM F4 end-to-end loopback commands.ro Counter32 UNITS "cells" .1.3.6.1.4.1.4874.2.2.8.1.1.11.1.19 |
juniAtmF4FlowEndToEndOutLoopbackRspsTransmitted OAM F4 end-to-end loopback responses.ro Counter32 UNITS "cells" .1.3.6.1.4.1.4874.2.2.8.1.1.11.1.20 |
juniAtmF4FlowOamSegmentStatsTableThis table contains entries for F4 flow Segment OAM circuits stats. SEQUENCE OF JuniAtmF4FlowOamSegmentStatsEntry .1.3.6.1.4.1.4874.2.2.8.1.1.12 |
juniAtmF4FlowOamSegmentStatsEntryEach entry provides stats for one F4 OAM circuit for each VPI. JuniAtmF4FlowOamSegmentStatsEntry .1.3.6.1.4.1.4874.2.2.8.1.1.12.1 |
juniAtmF4FlowInOamSegmentAisCellsReceived end-to-end OAM F4 AIS cells.ro Counter32 UNITS "cells" .1.3.6.1.4.1.4874.2.2.8.1.1.12.1.1 |
juniAtmF4FlowInOamSegmentRdiCellsReceived end-to-end OAM F4 RDI cells.ro Counter32 UNITS "cells" .1.3.6.1.4.1.4874.2.2.8.1.1.12.1.2 |
juniAtmF4FlowInOamSegmentCCCellsReceived end-to-end OAM F4 CC cells.ro Counter32 UNITS "cells" .1.3.6.1.4.1.4874.2.2.8.1.1.12.1.3 |
juniAtmF4FlowInOamSegmentCCActDeActCellsReceived end-to-end OAM F4 activation/de-activation cells.ro Counter32 UNITS "cells" .1.3.6.1.4.1.4874.2.2.8.1.1.12.1.4 |
juniAtmF4FlowInOamSegmentLoopbackCellsTotal received OAM F4 segment loopback cells. Aggregate of
juniAtmF4FlowSegmentInLoopbackCmds and
juniAtmF4FlowSegmentInLoopbackRspsro Counter32 UNITS "cells" .1.3.6.1.4.1.4874.2.2.8.1.1.12.1.5 |
juniAtmF4FlowOutSegmentRdiCellsTransmitted end-to-end OAM F4 RDI cells.ro Counter32 UNITS "cells" .1.3.6.1.4.1.4874.2.2.8.1.1.12.1.6 |
juniAtmF4FlowOutSegmentCCCellsTransmitted end-to-end OAM F4 CC cells.ro Counter32 UNITS "cells" .1.3.6.1.4.1.4874.2.2.8.1.1.12.1.7 |
juniAtmF4FlowOutSegmentCCActDeActCellsTransmitted end-to-end OAM F4 activation/de-activation cells.ro Counter32 UNITS "cells" .1.3.6.1.4.1.4874.2.2.8.1.1.12.1.8 |
juniAtmF4FlowOutSegmentLoopbackCellsTotal transmitted OAM F4 segment loopback cells. Aggregate of
juniAtmF4FlowSegmentOutLoopbackCmds and
juniAtmF4FlowSegmentOutLoopbackRspsro Counter32 UNITS "cells" .1.3.6.1.4.1.4874.2.2.8.1.1.12.1.9 |
juniAtmF4FlowSegmentLastTimeChangedLast time end-to-end F4 OAM flow got changed.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.4874.2.2.8.1.1.12.1.10 |
juniAtmF4FlowOamSegmentVpOperationStateRepresents the F4 end-to-end OAM flow VP operation states. It can take
one of the following operational state values:
vcAisState - AIS cell received or underlying physical layer
reporting transmission path AIS.
vcRdiState - RDI cell received.
vcDownRetry - OAM loopback failed, using retry frequency to
verify that the VC is really down.
vcUpRetry - OAM loopback successful, using retry frequency
to verify that the VC is really up.
vcUp - OAM loopback successful after up retry
verification.
vcDown - OAM loopback failed after down retry
verification.
vcNotManaged - No verification via loopback cells being
performed.
vpAisState - State when F4 AIS cell is received.
vpRdiState - State when F4 RDI cell is received.
vcInVpRdiState - The data vc is down as a result of VP failure
thorugh F4 Rdi oam cell.
vcInVpAisState - The data vc is down as a result of VP failure
through F4 Ais oam cell.
vcSegmentAisState - Segment AIS cell received.
vcSegRdiState - Segment RDI cell received.ro Enumeration .1.3.6.1.4.1.4874.2.2.8.1.1.12.1.11 |
juniAtmF4FlowOamSegmentVpAdminStateSegment VP admin state.ro Enumeration .1.3.6.1.4.1.4874.2.2.8.1.1.12.1.12 |
juniAtmF4FlowSegmentInOamCellsReceived end-to-end OAM F4 loopback cells.ro Counter32 UNITS "cells" .1.3.6.1.4.1.4874.2.2.8.1.1.12.1.13 |
juniAtmF4FlowSegmentOutOamCellsTransmitted end-to-end OAM F4 loopback cells.ro Counter32 UNITS "cells" .1.3.6.1.4.1.4874.2.2.8.1.1.12.1.14 |
juniAtmF4FlowSegmentInOamCellsDroppedReceived end-to-end OAM cells that were dropped.ro Counter32 UNITS "cells" .1.3.6.1.4.1.4874.2.2.8.1.1.12.1.15 |
juniAtmF4FlowSegmentInLoopbackCmdsReceived OAM F4 segment loopback commands.ro Counter32 UNITS "cells" .1.3.6.1.4.1.4874.2.2.8.1.1.12.1.16 |
juniAtmF4FlowSegmentInLoopbackRspsReceived OAM F4 segment loopback responses.ro Counter32 UNITS "cells" .1.3.6.1.4.1.4874.2.2.8.1.1.12.1.17 |
juniAtmF4FlowSegmentOutLoopbackCmdsTransmitted OAM F4 segment loopback commands.ro Counter32 UNITS "cells" .1.3.6.1.4.1.4874.2.2.8.1.1.12.1.18 |
juniAtmF4FlowSegmentOutLoopbackRspsTransmitted OAM F4 segment loopback responses.ro Counter32 UNITS "cells" .1.3.6.1.4.1.4874.2.2.8.1.1.12.1.19 |
juniAtmMartiniTimeoutTimerTableThis table contains entries for ATM Martini cell aggregation timeout
detection. The user can configure timeout values for three timers.
A row exists for every separate timer supported. These rows get
created as soon as the ERX system comes up. SEQUENCE OF JuniAtmMartiniTimeoutTimerEntry .1.3.6.1.4.1.4874.2.2.8.1.1.13 |
juniAtmMartiniTimeoutTimerEntryEach entry contains the timeout value of ATM Martini
cell aggregation timer. JuniAtmMartiniTimeoutTimerEntry .1.3.6.1.4.1.4874.2.2.8.1.1.13.1 |
juniAtmMartiniTimeoutTimerIndexThe ATM Martini cell aggregation timeout timer identifier. Enumeration .1.3.6.1.4.1.4874.2.2.8.1.1.13.1.1 |
juniAtmMartiniTimeoutTimerValueThe ATM Martini cell aggregation timeout timer value in microseconds.rw Integer32 .1.3.6.1.4.1.4874.2.2.8.1.1.13.1.2 |
juniAtmVpStatsTableThis table contains entries for ATM VP statistics present in the
system. A row exists for every VP on the ATM
interface. These rows get created as soon as the ATM major interface
created. SEQUENCE OF JuniAtmVpStatsEntry .1.3.6.1.4.1.4874.2.2.8.1.1.14 |
juniAtmVpStatsEntryEach entry contain the VP statistics. JuniAtmVpStatsEntry .1.3.6.1.4.1.4874.2.2.8.1.1.14.1 |
juniAtmVpStatsIfIndexThe ifIndex of the ATM interface. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4874.2.2.8.1.1.14.1.1 |
juniAtmVpStatsVpiThe VPI value of the virtual path for which statistics are retrieved. AtmVpIdentifier (ATM-TC-MIB) .1.3.6.1.4.1.4874.2.2.8.1.1.14.1.2 |
juniAtmVpStatsInCellsReceived cells.ro Counter64 .1.3.6.1.4.1.4874.2.2.8.1.1.14.1.3 |
juniAtmVpStatsInPacketsReceived AAL5 PDUs.ro Counter64 .1.3.6.1.4.1.4874.2.2.8.1.1.14.1.4 |
juniAtmVpStatsInPacketOctetsReceived AAL5 PDU octets.ro Counter64 .1.3.6.1.4.1.4874.2.2.8.1.1.14.1.5 |
juniAtmVpStatsOutCellsTransmitted cells.ro Counter64 .1.3.6.1.4.1.4874.2.2.8.1.1.14.1.6 |
juniAtmVpStatsOutPacketsTransmitted AAL5 PDUsro Counter64 .1.3.6.1.4.1.4874.2.2.8.1.1.14.1.7 |
juniAtmVpStatsOutPacketOctetsTransmitted AAL5 PDU octets.ro Counter64 .1.3.6.1.4.1.4874.2.2.8.1.1.14.1.8 |
juniAtmVpStatsInPacketErrorsReceived packets dropped due to errors.ro Counter32 .1.3.6.1.4.1.4874.2.2.8.1.1.14.1.9 |
juniAtmVpStatsOutPacketErrorsPackets not transmitted due to errors.ro Counter32 .1.3.6.1.4.1.4874.2.2.8.1.1.14.1.10 |
juniAtmVpStatsInPacketDiscardsReceived packets without errors discarded.ro Counter32 .1.3.6.1.4.1.4874.2.2.8.1.1.14.1.11 |
juniAtmVpStatsInPacketOctetDiscardsReceived bytes without errors discarded.ro Counter32 .1.3.6.1.4.1.4874.2.2.8.1.1.14.1.12 |
juniAtmVpStatsInPacketUnknownProtocolReceived packets that are discarded because the interface can not
discern or is not configured to support this protocol.ro Counter32 .1.3.6.1.4.1.4874.2.2.8.1.1.14.1.13 |
juniAtmVpStatsCrcErrorsReceived packets that are discarded because of check sum errosro Counter32 .1.3.6.1.4.1.4874.2.2.8.1.1.14.1.14 |
juniAtmVpStatsSarTimeoutsReceived packets that are discarded because of SAR timeoutro Counter32 .1.3.6.1.4.1.4874.2.2.8.1.1.14.1.15 |
juniAtmVpStatsOverSizedPacketsOver sized packets that are received on this VP.ro Counter32 .1.3.6.1.4.1.4874.2.2.8.1.1.14.1.16 |
juniAtmAal5IfLayer OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.8.1.2 |
juniAtmAal5NextIfIndexCoordinate ifIndex value allocation for entries in juniAtmAal5IfTable.
A GET of this object returns the next available ifIndex value to be used
to create an entry in the associated interface table; or zero, if no
valid ifIndex value is available. This object also returns a value of
zero when it is the lexicographic successor of a varbind presented in an
SNMP GETNEXT or GETBULK request, for which circumstance it is assumed
that ifIndex allocation is unintended.
Successive GETs will typically return different values, thus avoiding
collisions among cooperating management clients seeking to create table
entries simultaneously.ro JuniNextIfIndex (Juniper-TC) .1.3.6.1.4.1.4874.2.2.8.1.2.1 |
juniAtmAal5IfTableThis table contains entries for ATM AAL5 interfaces present in the
system. SEQUENCE OF JuniAtmAal5IfEntry .1.3.6.1.4.1.4874.2.2.8.1.2.2 |
juniAtmAal5IfEntryEach entry describes the characteristics of an ATM AAL5 interface.
Creating/deleting entries in this table causes corresponding entries for
be created/deleted in ifTable/ifXTable/juniIfTable. JuniAtmAal5IfEntry .1.3.6.1.4.1.4874.2.2.8.1.2.2.1 |
juniAtmAal5IfIndexThe ifIndex of the ATM AAL5 interface. When creating entries in this
table, suitable values for this object are determined by reading
juniAtmAal5NextIfIndex. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4874.2.2.8.1.2.2.1.1 |
juniAtmAal5IfRowStatusControls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroy
To create an entry in this table, the following entry objects MUST be
explicitly configured:
juniAtmAal5IfRowStatus
juniAtmAal5IfLowerIfIndex
In addition, when creating an entry the following condition must hold:
A value for juniAtmAal5IfIndex must have been determined previously,
by reading juniAtmAal5NextIfIndex.
A corresponding entry in ifTable/ifXTable/juniIfTable is created or
destroyed as a result of creating/destroying an entry in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.8.1.2.2.1.2 |
juniAtmAal5IfLowerIfIndexThe ifIndex of an ATM interface over which this ATM AAL5 interface is
to be layered. A value of zero indicates no layering. An
implementation may choose to require that a nonzero value be configured
at entry creation.rw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.4874.2.2.8.1.2.2.1.3 |
juniAtmBulkCircuitsNameTableThe entries in this table provide mappings of ATM bulk virtual circuit
range names to local integer identifiers for those profiles. These
integers are used as indexes into other MIB tables containing profile
configuration parameters associated with the same profile name. SEQUENCE OF JuniAtmBulkCircuitsNameEntry .1.3.6.1.4.1.4874.2.2.8.1.2.3 |
juniAtmBulkCircuitsNameEntryA mapping of a ATM bulk virtual circuit range name to an integer
identifier for that name. JuniAtmBulkCircuitsNameEntry .1.3.6.1.4.1.4874.2.2.8.1.2.3.1 |
juniAtmBulkCircuitsNameAal5IfIndexThe ifIndex of the ATM AAL5 interface. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4874.2.2.8.1.2.3.1.1 |
juniAtmBulkCircuitsNameNameThe ATM bulk virtual circuit range name uniquely identifying this
entry. DisplayString .1.3.6.1.4.1.4874.2.2.8.1.2.3.1.2 |
juniAtmBulkCircuitsNameRowStatusControls creation/deletion of entries in this table. Only the values
'createAndGo' and 'destroy' may be SET.
Creating an entry in this table creates corresponding entry in
juniAtmBulkCircuitsIdTable. Deleting an entry in this table deletes
corresponding entries in juniAtmBulkCircuitsIdTable,
juniAtmBulkCircuitsTable and
juniAtmProfileOverrideAssignIfCircuitTable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.8.1.2.3.1.3 |
juniAtmBulkCircuitsNameIdThe integer identifier associated with this ATM bulk virtual circuit
range name.
This value of this identifier is assigned by the device when an entry in
this table is created.ro Unsigned32 .1.3.6.1.4.1.4874.2.2.8.1.2.3.1.4 |
juniAtmBulkCircuitsIdTableProvides inverse mapping of ATM bulk virtual circuit IDs to ATM bulk
virtual circuit names. SEQUENCE OF JuniAtmBulkCircuitsIdEntry .1.3.6.1.4.1.4874.2.2.8.1.2.4 |
juniAtmBulkCircuitsIdEntryA mapping of an integer identifier to a ATM bulk virtual circuit name. JuniAtmBulkCircuitsIdEntry .1.3.6.1.4.1.4874.2.2.8.1.2.4.1 |
juniAtmBulkCircuitsIdAal5IfIndexThe ifIndex of the ATM AAL5 interface. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4874.2.2.8.1.2.4.1.1 |
juniAtmBulkCircuitsIdIdThe integer identifier associated with this ATM bulk virtual circuit
name. Unsigned32 .1.3.6.1.4.1.4874.2.2.8.1.2.4.1.2 |
juniAtmBulkCircuitsIdNameThe ATM bulk virtual circuit name having the associated identifier.ro DisplayString .1.3.6.1.4.1.4874.2.2.8.1.2.4.1.3 |
juniAtmBulkCircuitsIdNextInstanceThe next available instance value for juniAtmBulkCircuitsEntry.ro Unsigned32 .1.3.6.1.4.1.4874.2.2.8.1.2.4.1.4 |
juniAtmBulkCircuitsTableThis table contains bulk virtual circuit range parameters. SEQUENCE OF JuniAtmBulkCircuitsEntry .1.3.6.1.4.1.4874.2.2.8.1.2.5 |
juniAtmBulkCircuitsEntryEach entry describes the characteristics of VC range. JuniAtmBulkCircuitsEntry .1.3.6.1.4.1.4874.2.2.8.1.2.5.1 |
juniAtmBulkCircuitsAal5IfIndexThe ifIndex of the ATM AAL5 interface on which this bulk virtual
circuit sub-range is created. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4874.2.2.8.1.2.5.1.1 |
juniAtmBulkCircuitsIdThe integer identifier associated with this ATM bulk virtual circuit
name. Unsigned32 .1.3.6.1.4.1.4874.2.2.8.1.2.5.1.2 |
juniAtmBulkCircuitsInstanceThe unique identifier of the ATM bulk virtual circuit sub-range. Unsigned32 .1.3.6.1.4.1.4874.2.2.8.1.2.5.1.3 |
juniAtmBulkCircuitsRowStatusControls creation/deletion of entries in this table. Only the values
'createAndGo' and 'destroy' may be SET.
Since none of the VPI/VCI minimum and maximum values have default
values, all these values must be specified before setting RowStatus to
'createAndGo'. The VPI/VCI minimum and maximum values can only be
configured upon creation.
Deleting an entry in this table deletes corresponding entries in
juniAtmProfileOverrideAssignIfCircuitTable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.8.1.2.5.1.4 |
juniAtmBulkCircuitsMinVpiThe minimum value of VPI for this circuit sub-range. This value must
be less than or equal to the value of juniAtmBulkCircuitsMaxVpi.rw AtmVpIdentifier (ATM-TC-MIB) .1.3.6.1.4.1.4874.2.2.8.1.2.5.1.5 |
juniAtmBulkCircuitsMaxVpiThe maximum value of VPI for this cicuit sub-range. This value must
be equal to or greater than the value of juniAtmBulkCircuitsMinVpi.rw AtmVpIdentifier (ATM-TC-MIB) .1.3.6.1.4.1.4874.2.2.8.1.2.5.1.6 |
juniAtmBulkCircuitsMinVciThe minimum value of VCI for this circuit sub-range. This value must
be less than or equal to the value of juniAtmBulkCircuitsMaxVci.rw AtmVcIdentifier (ATM-TC-MIB) .1.3.6.1.4.1.4874.2.2.8.1.2.5.1.7 |
juniAtmBulkCircuitsMaxVciThe maximum value of VCI for this circuit sub-range. This value must
be equal to or greater than the value of juniAtmBulkCircuitsMinVci.rw AtmVcIdentifier (ATM-TC-MIB) .1.3.6.1.4.1.4874.2.2.8.1.2.5.1.8 |
juniAtmBulkCircuitsAdminStateThe administrative status of this circuit sub-range.rw JuniEnable (Juniper-TC) .1.3.6.1.4.1.4874.2.2.8.1.2.5.1.9 |
juniAtmProfileOverrideAssignIfCircuitTableTable providing overriding profile assignment to a circuit configured
as part of bulk-configuration. Circuit is identified by interface index
and vpi, vci.
The entries in this table specify which profile to use when creating and
configuring a dynamic interface above a circuit specified by vpi and
vci.
This entry is effective when the circuit specified by
juniAtmProfileOverrideAssignIfCircuitAal5Index,
juniAtmProfileOverrideAssignIfCircuitRangeId,
juniAtmProfileOverrideAssignIfCircuitVpi,
juniAtmProfileOverrideAssignIfCircuitVci
is part of bulk-configuration. SEQUENCE OF JuniAtmProfileOverrideAssignIfCircuitEntry .1.3.6.1.4.1.4874.2.2.8.1.2.6 |
juniAtmProfileOverrideAssignIfCircuitEntryAn assignment of a profile to a circuit configured as part of
bulk-configuration on an AAL5 interface. JuniAtmProfileOverrideAssignIfCircuitEntry .1.3.6.1.4.1.4874.2.2.8.1.2.6.1 |
juniAtmProfileOverrideAssignIfCircuitAal5IndexThe ifIndex of the AAL5 interface to which the profile is assigned. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4874.2.2.8.1.2.6.1.1 |
juniAtmProfileOverrideAssignIfCircuitRangeIdThe integer identifier associated with the ATM bulk circuit
configuration. Unsigned32 .1.3.6.1.4.1.4874.2.2.8.1.2.6.1.2 |
juniAtmProfileOverrideAssignIfCircuitVpiThe VPI value of the circuit to which the profile is assigned. AtmVpIdentifier (ATM-TC-MIB) .1.3.6.1.4.1.4874.2.2.8.1.2.6.1.3 |
juniAtmProfileOverrideAssignIfCircuitVciThe VCI value of the circuit to which the profile is assigned. AtmVcIdentifier (ATM-TC-MIB) .1.3.6.1.4.1.4874.2.2.8.1.2.6.1.4 |
juniAtmProfileOverrideAssignIfCircuitRowStatusControls creation/deletion of entries in this table. Only the values
'createAndGo' and 'destroy' may be SET.
Since the VPI, VCI and profileId values do not have any default
values, all these values must be specified before setting RowStatus to
'createAndGo'. The VPI, VCI and profileId values can only be
configured upon creation. None of these values can be modified except
by deleting the entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.8.1.2.6.1.5 |
juniAtmProfileOverrideAssignIfCircuitProfileIdThe ID of the profile assigned to the circuit configured as part of
bulk-configuration. Circuit is identified by interface index and vpi,
vci.rw Unsigned32 .1.3.6.1.4.1.4874.2.2.8.1.2.6.1.6 |
juniAtmProfileOverrideAssignIfCircuitOperStatusThe operational status of the profile override assignment identified
by this entry.
It returns inactive(0), if a static ATM circuit with identical VPI/VCI
values is present on the same ATM interface. In this case, this
profile override will not be used to configure upper dynamic
interfaces.
It returns active(1), if no static ATM circuit with identical VPI/VCI
values is present on the same ATM interface. In this case, this
profile override will be used to configure upper dynamic interfaces.ro Enumeration .1.3.6.1.4.1.4874.2.2.8.1.2.6.1.7 |
juniAtmSubIfLayer OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.8.1.3 |
juniAtmSubIfNextIfIndexCoordinate ifIndex value allocation for entries in juniAtmSubIfTable.
A GET of this object returns the next available ifIndex value to be used
to create an entry in the associated interface table; or zero, if no
valid ifIndex value is available. This object also returns a value of
zero when it is the lexicographic successor of a varbind presented in an
SNMP GETNEXT or GETBULK request, for which circumstance it is assumed
that ifIndex allocation is unintended.
Successive GETs will typically return different values, thus avoiding
collisions among cooperating management clients seeking to create table
entries simultaneously.ro JuniNextIfIndex (Juniper-TC) .1.3.6.1.4.1.4874.2.2.8.1.3.1 |
juniAtmSubIfTableThis table contains entries for ATM Subinterfaces present in the
system. SEQUENCE OF JuniAtmSubIfEntry .1.3.6.1.4.1.4874.2.2.8.1.3.2 |
juniAtmSubIfEntryEach entry describes the characteristics of an ATM Subinterface.
Creating/deleting entries in this table causes corresponding entries for
be created/deleted in ifTable/ifXTable/juniIfTable. JuniAtmSubIfEntry .1.3.6.1.4.1.4874.2.2.8.1.3.2.1 |
juniAtmSubIfIndexThe ifIndex of the ATM Subinterface. When creating entries in this
table, suitable values for this object are determined by reading
juniAtmSubNextIfIndex. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4874.2.2.8.1.3.2.1.1 |
juniAtmSubIfRowStatusControls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroy
To create an entry in this table, the following entry objects MUST be
explicitly configured:
juniAtmSubIfRowStatus
juniAtmSubIfLowerIndex
In addition, when creating an entry the following condition must hold:
A value for juniAtmSubIfIndex must have been determined previously,
by reading juniAtmSubIfNextIfIndex.
A corresponding entry in ifTable/ifXTable/juniIfTable is created or
destroyed as a result of creating/destroying an entry in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.8.1.3.2.1.2 |
juniAtmSubIfDistinguisherAn integer identifier for the subinterface, used in conjunction with
the command-line interface. It is provided here for cross-reference
purposes only.
The value must be unique among subinterfaces configured on the same
underlying ATM adaptation layer. The upper bound for the value is
further constrained to be identical with the maximum number of
subinterfaces supported by the lower interface.
If this object is not configured, a value will be allocated internally
and can be queried after table entry creation has succeeded.rw Integer32 .1.3.6.1.4.1.4874.2.2.8.1.3.2.1.3 |
juniAtmSubIfLowerIfIndexThe ifIndex of an ATM AAL5 interface over which this ATM subinterface
is to be layered. A value of zero indicates no layering. An
implementation may choose to require that a nonzero value be configured
at entry creation.rw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.4874.2.2.8.1.3.2.1.4 |
juniAtmSubIfNbmaThe NBMA administrative setting. Setting this value of this object to
true(1) will enable multipoint access on this interface. Setting the
value to false(2), will enable point to point access on this interface.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.8.1.3.2.1.5 |
juniAtmSubIfAddressSpecifies the local ATM NSAP address of the circuit. A GET operation
returns a full 20-octet NSAP. A SET operation only requires 7 octets,
since the prefix can be implied.rwdeprecated AtmAddr .1.3.6.1.4.1.4874.2.2.8.1.3.2.1.6 |
juniAtmSubIfMtuThe size of the largest packet which can be sent/received on the
interface, specified in octets.rw Integer32 .1.3.6.1.4.1.4874.2.2.8.1.3.2.1.7 |
juniAtmSubIfAdvisoryRxSpeedAdvisory receive speed, in kilobits per second (kbps),
of this subinterface. This object has no impact on
forwarding performance but may be used as a hint for
underlying circuit receive speed.rw Integer32 .1.3.6.1.4.1.4874.2.2.8.1.3.2.1.8 |
juniAtmSubIfMartiniMaxCellsPerPacketThe number of cells that can be aggregated in a single ATM Martini
packet in cell-relay mode.rw Integer32 .1.3.6.1.4.1.4874.2.2.8.1.3.2.1.9 |
juniAtmSubIfMartiniTimeoutTimerIdThe timer identifier used to abandon cell aggregation when no
cells are supplied for transmission in ATM Martini cell-relay mode.rw Integer32 .1.3.6.1.4.1.4874.2.2.8.1.3.2.1.10 |
juniAtmSubIfAssociatedVcClassIdThe integer identifier of the ATM VC class associated with this ATM
sub interface. A value for this identifier is determined by locating or
creating an ATM VC class name in the juniAtmVcClassNameTable. A value of 0
means no VC class association exists for this interface.rw Unsigned32 .1.3.6.1.4.1.4874.2.2.8.1.3.2.1.11 |
juniAtmSubIfVccTableThis table contains entries for ATM VCCs configured on ATM
subinterfaces present in the system.
An implementation may constrain the number of VCCs permitted to be
configured per ATM Subinterface; in particular, an implementation may
restrict each ATM Subinterface to have a single VCC.
Attributes in this entry can only be configured at entry creation, and
remain fixed for the lifetime of the entry. SEQUENCE OF JuniAtmSubIfVccEntry .1.3.6.1.4.1.4874.2.2.8.1.3.3 |
juniAtmSubIfVccEntryEach entry describes the characteristics of an ATM subinterface VCC. JuniAtmSubIfVccEntry .1.3.6.1.4.1.4874.2.2.8.1.3.3.1 |
juniAtmSubIfVccVpiThe VPI of the ATM VCC used by this subinterface. AtmVpIdentifier (ATM-TC-MIB) .1.3.6.1.4.1.4874.2.2.8.1.3.3.1.1 |
juniAtmSubIfVccVciThe VCI of the ATM VCC used by this subinterface. AtmVcIdentifier (ATM-TC-MIB) .1.3.6.1.4.1.4874.2.2.8.1.3.3.1.2 |
juniAtmSubIfVccRowStatusControls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroy
To create an entry in this table, the following entry objects MUST be
explicitly configured:
juniAtmSubIfVccRowStatus
In addition, when creating an entry the following conditions must hold:
The ATM Subinterface identified by juniAtmSubIfIndex must exist.
A positive value configured for juniAtmSubIfVccVcd must not already
be assigned to an existing VCC.
For each value of juniAtmSubIfVccServiceCategory, additional
dependent objects in the entry require configuration as identified
here:
juniAtmSubIfVccServiceCategory Requires configuration of:
ubr <none>
ubrPcr juniAtmSubIfVccPcr
nrtVbr juniAtmSubIfVccPcr
juniAtmSubIfVccScr
juniAtmSubIfVccMbs
cbr juniAtmSubIfVccPcr
rtVbr juniAtmSubIfVccPcr
juniAtmSubIfVccScr
juniAtmSubIfVccMbs
Attributes in this entry can only be configured at entry creation,
and remain fixed for the lifetime of the entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.8.1.3.3.1.3 |
juniAtmSubIfVccVcdAn integer identifier for the circuit, used in conjunction with the
command-line interface. It is provided here for cross-reference
purposes only.
The value must be unique among VCCs configured on the same underlying
ATM interface.
If this object is not configured, or is configured with a value of zero,
a value will be allocated internally and can be queried after table
entry creation has succeeded.rw Integer32 .1.3.6.1.4.1.4874.2.2.8.1.3.3.1.4 |
juniAtmSubIfVccTypeSpecifies the encapsulation used by the circuit to carry IP datagrams.
Encapsulations are as specified in RFC1483 Multiprotocol Interconnect
over ATM. The 'autoconfig' value will recognize both VcMux and LLC
formats. The 'aal5' and 'aal0' values are used for encapsulation
methods for transport of ATM frames and cells over IP and MPLS networks
when no encapsulation method is specified.rw Enumeration .1.3.6.1.4.1.4874.2.2.8.1.3.3.1.5 |
juniAtmSubIfVccServiceCategoryService category for this circuit:
ubr Unspecified Bit Rate (best effort).
ubrPcr Unspecified Bit Rate with Peak Cell Rate limit.
nrtVbr Non-RealTime Variable Bit Rate.
cbr Constant Bit Rate.
rtVbr Realtime Variable Bit Rate.rw Enumeration .1.3.6.1.4.1.4874.2.2.8.1.3.3.1.6 |
juniAtmSubIfVccPcrPeak Cell Rate, in kilobits per second (kbps), of this circuit.
This parameter is only required when juniAtmSubIfVccServiceCategory is
configured to have one of the following values:
ubrPcr
nrtVbr
cbr
rtVbrrw Integer32 .1.3.6.1.4.1.4874.2.2.8.1.3.3.1.7 |
juniAtmSubIfVccScrSustained Cell Rate, in kilobits per second (kbps), of this circuit.
This parameter is only required when juniAtmSubIfVccServiceCategory is
configured to have the following value:
nrtVbr
rtVbrrw Integer32 .1.3.6.1.4.1.4874.2.2.8.1.3.3.1.8 |
juniAtmSubIfVccMbsMaximum Burst Size, in cells, of this circuit.
This parameter is only required when juniAtmSubIfVccServiceCategory is
configured to have the following value:
nrtVbr
rtVbrrw Integer32 .1.3.6.1.4.1.4874.2.2.8.1.3.3.1.9 |
juniAtmSubIfInverseArpEnables the inverse ARP protocol on this VCC; true(1) enables the
protocol, false(2) disables it.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.8.1.3.3.1.10 |
juniAtmSubIfInverseArpRefreshThe refresh rate in minutes between inverse ARP protocol messages.rw Integer32 .1.3.6.1.4.1.4874.2.2.8.1.3.3.1.11 |
juniAtmSubIfVccAssociatedVcClassIdThe integer identifier of the ATM VC class associated with this ATM
sub interface. A value for this identifier is determined by locating or
creating an ATM VC class name in the juniAtmVcClassNameTable. A value
of 0 means no VC class association exists for this VC.rw Unsigned32 .1.3.6.1.4.1.4874.2.2.8.1.3.3.1.12 |
juniAtmCircuitOamTableThis table contains circuit OAM data for a PVC. SEQUENCE OF JuniAtmCircuitOamEntry .1.3.6.1.4.1.4874.2.2.8.1.3.4 |
juniAtmCircuitOamEntryEach entry provides OAM data on an ATM PVC. JuniAtmCircuitOamEntry .1.3.6.1.4.1.4874.2.2.8.1.3.4.1 |
juniAtmCircuitOamIfIndexThe ifIndex of the ATM subinterface. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4874.2.2.8.1.3.4.1.1 |
juniAtmCircuitOamVpiThe VPI of the ATM VCC used by this ATM interface and PVC. AtmVpIdentifier (ATM-TC-MIB) .1.3.6.1.4.1.4874.2.2.8.1.3.4.1.2 |
juniAtmCircuitOamVciThe VCI of the ATM VCC used by this ATM interface and PVC. AtmVcIdentifier (ATM-TC-MIB) .1.3.6.1.4.1.4874.2.2.8.1.3.4.1.3 |
juniAtmCircuitOamAdminStatusThe administrative state of OAM for the interface identified by this
entry.rw Enumeration .1.3.6.1.4.1.4874.2.2.8.1.3.4.1.4 |
juniAtmCircuitOamLoopbackOperStatusThe operational status of OAM for the interface identified by this
entry.
oamOperStatusNotSupported(0) - OAM not supported on this interface
oamOperStatusDisabled(1) - VC integrity disabled
oamOperStatusSent(2) - Loopback sent, awaiting response
oamOperStatusReceived(3) - Loopback response received, awaiting
frequency
oamOperStatusFailed(4) - Loopback response not received, or
invalid response receivedro Enumeration .1.3.6.1.4.1.4874.2.2.8.1.3.4.1.5 |
juniAtmCircuitVcOamOperStatusThe OAM VC operational status of this entry.
oamVcOperStateAisState(0) - AIS cell received or underlying
physical layer reporting transmission
path AIS
oamVcOperStateRdiState(1) - RDI cell received
oamVcOperStateDownRetry(2) - OAM loopback failed, using retry
frequency to verify that the VC is
really down
oamVcOperStateUpRetry(3) - OAM loopback successful, using retry
frequency to verify that the VC is
really up
oamVcOperStateUp(4) - OAM loopback successful after up retry
verification
oamVcOperStateDown(5) - OAM loopback failed after down retry
verification
oamVcOperStateNotManaged(6)- No verification via loopback cells
being performed
oamVcOperStateVpAis(7) - F4 AIS cell received
oamVcOperStateVpRdi(8) - F4 RDI cell received
oamVcOperStateVcInVpRdi(9) - F4 RDI cell received; path failure
oamVcOperStateVcInVpAis(10)- F4 AIS cell received; path failure
oamVcOperStateSegAis(11) - Segment AIS cell received
oamVcOperStateSegRdi(12) - Segment RDI cell received
oamVcOperStateGenAis(13) - Connection failure; generating AIS
cells.ro Enumeration .1.3.6.1.4.1.4874.2.2.8.1.3.4.1.6 |
juniAtmCircuitOamLoopbackFrequencyThe OAM loopback frequency in seconds.rw Integer32 .1.3.6.1.4.1.4874.2.2.8.1.3.4.1.7 |
juniAtmCircuitInOamF5CellsReceived OAM F5 cells.ro Counter32 UNITS "cells" .1.3.6.1.4.1.4874.2.2.8.1.3.4.1.8 |
juniAtmCircuitInOamCellsDroppedReceived OAM cells that were dropped.ro Counter32 UNITS "cells" .1.3.6.1.4.1.4874.2.2.8.1.3.4.1.9 |
juniAtmCircuitOutOamF5CellsTransmitted OAM F5 cells.ro Counter32 UNITS "cells" .1.3.6.1.4.1.4874.2.2.8.1.3.4.1.10 |
juniAtmCircuitInOamF5EndToEndLoopbackCellsTotal received OAM F5 end-to-end loopback cells. Aggregate of
juniAtmCircuitInOamF5EndToEndLoopbackCmds and
juniAtmCircuitInOamF5EndToEndLoopbackRspsro Counter32 UNITS "cells" .1.3.6.1.4.1.4874.2.2.8.1.3.4.1.11 |
juniAtmCircuitInOamF5SegmentLoopbackCellsTotal received OAM F5 segment loopback cells. Aggregate of
juniAtmCircuitInOamF5SegmentLoopbackCmds and
juniAtmCircuitInOamF5SegmentLoopbackRspsro Counter32 UNITS "cells" .1.3.6.1.4.1.4874.2.2.8.1.3.4.1.12 |
juniAtmCircuitInOamF5AisCellsReceived OAM F5 AIS cells.ro Counter32 UNITS "cells" .1.3.6.1.4.1.4874.2.2.8.1.3.4.1.13 |
juniAtmCircuitInOamF5RdiCellsReceived OAM F5 RDI cells.ro Counter32 UNITS "cells" .1.3.6.1.4.1.4874.2.2.8.1.3.4.1.14 |
juniAtmCircuitOutOamF5EndToEndLoopbackCellsTotal transmitted OAM F5 end-to-end loopback cells. Aggregate of
juniAtmCircuitOutOamF5EndToEndLoopbackCmds and
juniAtmCircuitOutOamF5EndToEndLoopbackRspsro Counter32 UNITS "cells" .1.3.6.1.4.1.4874.2.2.8.1.3.4.1.15 |
juniAtmCircuitOutOamF5SegmentLoopbackCellsTotal transmitted OAM F5 segment loopback cells. Aggregate of
juniAtmCircuitOutOamF5SegmentLoopbackCmds and
juniAtmCircuitOutOamF5SegmentLoopbackRspsro Counter32 UNITS "cells" .1.3.6.1.4.1.4874.2.2.8.1.3.4.1.16 |
juniAtmCircuitOutOamF5RdiCellsTransmitted OAM F5 RDI cells.ro Counter32 UNITS "cells" .1.3.6.1.4.1.4874.2.2.8.1.3.4.1.17 |
juniAtmCircuitInOamF5EndToEndLoopbackCmdsReceived OAM F5 end-to-end loopback commands.ro Counter32 UNITS "cells" .1.3.6.1.4.1.4874.2.2.8.1.3.4.1.18 |
juniAtmCircuitInOamF5EndToEndLoopbackRspsReceived OAM F5 end-to-end loopback responses.ro Counter32 UNITS "cells" .1.3.6.1.4.1.4874.2.2.8.1.3.4.1.19 |
juniAtmCircuitInOamF5SegmentLoopbackCmdsReceived OAM F5 segment loopback commands.ro Counter32 UNITS "cells" .1.3.6.1.4.1.4874.2.2.8.1.3.4.1.20 |
juniAtmCircuitInOamF5SegmentLoopbackRspsReceived OAM F5 segment loopback responses.ro Counter32 UNITS "cells" .1.3.6.1.4.1.4874.2.2.8.1.3.4.1.21 |
juniAtmCircuitOutOamF5EndToEndLoopbackCmdsTransmitted OAM F5 end-to-end loopback commands.ro Counter32 UNITS "cells" .1.3.6.1.4.1.4874.2.2.8.1.3.4.1.22 |
juniAtmCircuitOutOamF5EndToEndLoopbackRspsTransmitted OAM F5 end-to-end loopback responses.ro Counter32 UNITS "cells" .1.3.6.1.4.1.4874.2.2.8.1.3.4.1.23 |
juniAtmCircuitOutOamF5SegmentLoopbackCmdsTransmitted OAM F5 segment loopback commands.ro Counter32 UNITS "cells" .1.3.6.1.4.1.4874.2.2.8.1.3.4.1.24 |
juniAtmCircuitOutOamF5SegmentLoopbackRspsTransmitted OAM F5 segment loopback responses.ro Counter32 UNITS "cells" .1.3.6.1.4.1.4874.2.2.8.1.3.4.1.25 |
juniAtmCircuitOamUpCountSpecifies the number of successive loopback cell responses to receive
before a PVC is up for connectivity verification.rw Integer32 .1.3.6.1.4.1.4874.2.2.8.1.3.4.1.26 |
juniAtmCircuitOamDownCountSpecifies the number of successive loopback cell responses not received
before declaring a PVC down for connectivity verification.rw Integer32 .1.3.6.1.4.1.4874.2.2.8.1.3.4.1.27 |
juniAtmCircuitOamRetryFrequencySpecifies the frequency (in seconds) to transmit loopback cells when
verifying PVC state (up or down) for connectivity verification.rw Integer32 .1.3.6.1.4.1.4874.2.2.8.1.3.4.1.28 |
juniAtmCircuitOamAlarmDownCountSpecifies the number of successive alarm (AIS or RDI) cells to receive
before declaring a PVC down.rw Integer32 .1.3.6.1.4.1.4874.2.2.8.1.3.4.1.29 |
juniAtmCircuitOamAlarmClearTimeoutSpecifies how long to wait (in seconds) before declaring a PVC up after
it has stopped receiving alarm cells.rw Integer32 .1.3.6.1.4.1.4874.2.2.8.1.3.4.1.30 |
juniAtmSubIfVccTrafficShapingTableThis table contains entries for traffic shaping of ATM VCCs configured
on ATM subinterfaces present in the system. This table augments the
juniAtmSubIfVccTable only for VCCs that support traffic shapping.
Attributes in this entry can only be configured at entry creation, and
remain fixed for the lifetime of the entry. SEQUENCE OF JuniAtmSubIfVccTrafficShapingEntry .1.3.6.1.4.1.4874.2.2.8.1.3.5 |
juniAtmSubIfVccTrafficShapingEntryEach entry describes the traffic shping characteristics of an ATM
subinterface VCC. JuniAtmSubIfVccTrafficShapingEntry .1.3.6.1.4.1.4874.2.2.8.1.3.5.1 |
juniAtmSubIfVccTrafficShapingCdvtThe network cell delay variation tolerance (CDVT) in tenths of a
microsecond.rw Unsigned32 UNITS "tenths of a microsecond" .1.3.6.1.4.1.4874.2.2.8.1.3.5.1.1 |
juniAtmSubIfVccTrafficShapingClp0Specifies whether or not only CLP0 cells are to be policed according to
the traffic contract. CLP1 cells are forwarded on a best-effort basis
CLP-significant model for (VBR.2, VBR.3 conformance). Applicable only
for VBR circuits.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.8.1.3.5.1.2 |
juniAtmSubIfVccTrafficShapingTaggingSpecifies whether or not CLP0 cells should be tagged for SCR policing
(VBR.3 conformance). Applicable only for VBR circuits.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.8.1.3.5.1.3 |
juniAtmSubIfVccTrafficShapingPoliceObserveSpecifies whether of not no policing action is to be taken (note the
double negative; if true(1) then no policing action will be taken; if
false(2) then policing action will be taken). Regardless of the state
of this object, all counters will be incremented.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.8.1.3.5.1.4 |
juniAtmSubIfVccTrafficShapingPacketShapingSpecifies whether of not to shape output traffic on a packet boundary.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.8.1.3.5.1.5 |
juniAtmSubIfSvcConfigTableThis table contains entries for extending the juniAtmSubIfTable to
configure switched virtual connection (SVC) on the subinterfaces.deprecated SEQUENCE OF JuniAtmSubIfSvcConfigEntry .1.3.6.1.4.1.4874.2.2.8.1.3.6 |
juniAtmSubIfSvcConfigEntryEach entry provides configuration parameters for an ATM SVC on the
subinterface.deprecated JuniAtmSubIfSvcConfigEntry .1.3.6.1.4.1.4874.2.2.8.1.3.6.1 |
juniAtmSubIfSvcRowStatusControls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroyrwdeprecated RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.8.1.3.6.1.1 |
juniAtmSubIfSvcConfigDestAtmAddressSpecifies the destination ATM NSAP address of the circuit.rwdeprecated AtmAddr .1.3.6.1.4.1.4874.2.2.8.1.3.6.1.2 |
juniAtmSubIfSvcConfigCircuitTypeSpecifies the encapsulation used by the circuit to carry IP datagrams.
Encapsulations are as specified in RFC1483 Multiprotocol Interconnect
over ATM.rwdeprecated Enumeration .1.3.6.1.4.1.4874.2.2.8.1.3.6.1.3 |
juniAtmSubIfSvcConfigServiceCategoryService category for this circuit:
ubr Unspecified Bit Rate (best effort).
ubrPcr Unspecified Bit Rate with Peak Cell Rate limit.
nrtVbr Non-RealTime Variable Bit Rate.
cbr Constant Bit Rate.
rtVbr Realtime Variable Bit Rate.rwdeprecated Enumeration .1.3.6.1.4.1.4874.2.2.8.1.3.6.1.4 |
juniAtmSubIfSvcConfigPcrPeak Cell Rate, in kilo-bits per second (kbps), of this circuit.rwdeprecated Unsigned32 UNITS "kbps" .1.3.6.1.4.1.4874.2.2.8.1.3.6.1.5 |
juniAtmSubIfSvcConfigScrSustained Cell Rate, in kilo-bits per second (kbps), of this circuit.rwdeprecated Unsigned32 UNITS "kbps" .1.3.6.1.4.1.4874.2.2.8.1.3.6.1.6 |
juniAtmSubIfSvcConfigMbsMaximum Burst Size, in cells, of this circuit.rwdeprecated Unsigned32 UNITS "cells" .1.3.6.1.4.1.4874.2.2.8.1.3.6.1.7 |
juniAtmSubIfSvcConfigCdvtSpecify the network Cell Delay Variation Tolerance.rwobsolete Unsigned32 UNITS "100us" .1.3.6.1.4.1.4874.2.2.8.1.3.6.1.8 |
juniAtmSubIfSvcConfigClp0Specify that only CLP0 cells are to be policed according to the traffic
contract. CLP1 cells are forwarded on a best-effort basis
CLP-significant model for (VBR.2, VBR.3 conformance).rwdeprecated TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.8.1.3.6.1.9 |
juniAtmSubIfSvcConfigTaggingSpecify that CLP0 cells should be tagged for SCR policing (VBR.3
conformance).rwdeprecated TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.8.1.3.6.1.10 |
juniAtmSubIfSvcConfigObserveSpecify that no policing action is to be taken; only counters are
incremented.rwobsolete TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.8.1.3.6.1.11 |
juniAtmSubIfSvcConfigPacketDiscardEnable early packet Discard for this circuit.rwdeprecated TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.8.1.3.6.1.12 |
juniAtmSubIfSvcConfigDestE164AddressSpecifies the destination ATM E164 address of the circuit.rwobsolete AtmAddr .1.3.6.1.4.1.4874.2.2.8.1.3.6.1.13 |
juniAtmSubIfDescriptionExportEnabling of this object will program the subinterface description down
to the applicable line card. Note, the subinterface description sent
down to the line card is a truncated version (32 bytes) of the ifAlias.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.8.1.3.7 |
juniAtmNbma OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.8.1.4 |
juniAtmNbmaMapTableThis table contains entries for ATM NBMA maps. SEQUENCE OF JuniAtmNbmaMapEntry .1.3.6.1.4.1.4874.2.2.8.1.4.1 |
juniAtmNbmaMapEntryEach entry describes the characteristics of an ATM NBMA map. JuniAtmNbmaMapEntry .1.3.6.1.4.1.4874.2.2.8.1.4.1.1 |
juniAtmNbmaMapNameThe NBMA map name. JuniAtmNbmaMapName .1.3.6.1.4.1.4874.2.2.8.1.4.1.1.1 |
juniAtmNbmaMapVcdAn integer identifier for the ATM circuit, used in conjunction with the
command-line interface.
The value must be unique among VCs configured on the same ATM
interface. Integer32 .1.3.6.1.4.1.4874.2.2.8.1.4.1.1.2 |
juniAtmNbmaMapIpAddressThe IP address associated with this entry.rw IpAddress .1.3.6.1.4.1.4874.2.2.8.1.4.1.1.3 |
juniAtmNbmaMapVpiThe VPI identifier of the ATM circuit.ro AtmVpIdentifier (ATM-TC-MIB) .1.3.6.1.4.1.4874.2.2.8.1.4.1.1.4 |
juniAtmNbmaMapVciThe VCI identifier of the ATM circuit.ro AtmVcIdentifier (ATM-TC-MIB) .1.3.6.1.4.1.4874.2.2.8.1.4.1.1.5 |
juniAtmNbmaMapIfIndexThe ifIndex of the ATM major interface associated with this entry.
The value of this object will be zero when the map is not applied
to an interface.ro InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.4874.2.2.8.1.4.1.1.6 |
juniAtmNbmaMapBroadcastThe broadcast enable/disable setting for this entry. The value true(1)
enable broadcast support; disable(2) disabled broadcast support for this
entry.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.8.1.4.1.1.7 |
juniAtmNbmaMapRowStatusControls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroy
Additional notes to aid the network manager:
- NBMA maps are not supported on dynamic interface.
- NBMA maps can only be applied to a single major ATM interface at a
time.
- NBMA maps cannot be deleted unless the map is removed from the ATM
interface (juniAtmNbmaMapIfIndex = 0).
- The values of juniAtmNbmaMapVpi, juniAtmNbmaMapVci and
juniAtmNbmaMapIfIndex are zero until the map is applied to a major
ATM interface.
- To create an entry in this table, the following objects must be
present in the set PDU:
juniAtmNbmaMapIpAddress
juniAtmNbmaMapBroadcast
juniAtmNbmaMapRowStatus
- Once created, only the following objects can be modified:
juniAtmNbmaMapBroadcastrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.8.1.4.1.1.8 |
juniAtmNbmaMapListTableThis table contains entries for ATM NBMA map lists. SEQUENCE OF JuniAtmNbmaMapListEntry .1.3.6.1.4.1.4874.2.2.8.1.4.2 |
juniAtmNbmaMapListEntryEach entry describes the characteristics of an ATM NBMA map. JuniAtmNbmaMapListEntry .1.3.6.1.4.1.4874.2.2.8.1.4.2.1 |
juniAtmNbmaMapListNameThe NBMA Map List name. JuniAtmNbmaMapName .1.3.6.1.4.1.4874.2.2.8.1.4.2.1.1 |
juniAtmNbmaMapListRowStatusControls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroyrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.8.1.4.2.1.2 |
juniAtmPing OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.8.1.5 |
juniAtmPingTestTypes OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.8.1.5.1 |
juniAtmPingTestOamSegThis identifies an OAM Ping (multiple loopbacks) Test on a VPL, VPC,
VCL, or VCC termination point, using segment OAM cells.
The test type must have appended to it a code that uniquely identifies
an intermediate point responsible for looping back each cell. If this
is absent, the loopbacks are performed at the end of the segment or
connection.
E.g., the OID { juniAtmPingTestOamSeg 5 } identifies that the loopbacks
should be performed at the intermediate point labeled 5. OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.8.1.5.1.1 |
juniAtmPingTestOamE2EThis identifies an OAM Ping (multiple loopbacks) Test on a VPL, VPC,
VCL, or VCC termination point, using end-to-end OAM cells. OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.8.1.5.1.2 |
juniAtmVpPingTableThis table contains entries for extending the ATM-FORUM-SNMP-M4-MIB
atmM4VpTestTable to do ping (multiple loopback) type testing. SEQUENCE OF JuniAtmVpPingEntry .1.3.6.1.4.1.4874.2.2.8.1.5.2 |
juniAtmVpPingEntryEach entry describes the characteristics, status and results of the
most recent ATM ping test. JuniAtmVpPingEntry .1.3.6.1.4.1.4874.2.2.8.1.5.2.1 |
juniAtmVpPingProbeCountThe number of ping probes (OAM cells) to be sent to complete the test.rw Unsigned32 .1.3.6.1.4.1.4874.2.2.8.1.5.2.1.1 |
juniAtmVpPingTimeOutSpecifies the time-out value, in seconds, for a remote ping operation.rw Unsigned32 .1.3.6.1.4.1.4874.2.2.8.1.5.2.1.2 |
juniAtmVpPingCtlTrapGenerationThe value of this object determines when and if to generate a
notification for this entry:
testCompletion(0) - Generate a juniPingTestCompleted notification.
The value of this object defaults to zero, indicating that no
notification has been selected.rw Bits .1.3.6.1.4.1.4874.2.2.8.1.5.2.1.3 |
juniAtmVpPingSentProbesThe number of ping probes (OAM cells) that have been sent thus far for
this test. The value of this object MUST be set to zero when the
atmfM4VpTestStatus object transitions from notInUse(0) to inUse(1).ro Unsigned32 UNITS "probes" .1.3.6.1.4.1.4874.2.2.8.1.5.2.1.4 |
juniAtmVpPingProbeResponsesThe number of ping responses that have been received thus far for this
test. The value of this object MUST be set to zero when the
atmfM4VpTestStatus object transitions from notInUse(0) to inUse(1).ro Unsigned32 UNITS "probes" .1.3.6.1.4.1.4874.2.2.8.1.5.2.1.5 |
juniAtmVpPingStartTimeThe time (sysUpTime) when the test started.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.8.1.5.2.1.6 |
juniAtmVpPingMinRttThe shortest round-trip-time (RTT) for the pings that have received
responses. The value of this object MUST be set to zero when the
atmfM4VpTestStatus object transitions from notInUse(0) to inUse(1). A
value of zero for this object implies that no ping responses have been
received for the current test.ro Unsigned32 UNITS "milliseconds" .1.3.6.1.4.1.4874.2.2.8.1.5.2.1.7 |
juniAtmVpPingMaxRttThe longest round-trip-time (RTT) for the pings that have received
responses. The value of this object MUST be set to zero when the
atmfM4VpTestStatus object transitions from notInUse(0) to inUse(1). A
value of zero for this object implies that no ping responses have been
received for the current test.ro Unsigned32 UNITS "milliseconds" .1.3.6.1.4.1.4874.2.2.8.1.5.2.1.8 |
juniAtmVpPingAverageRttThe average round-trip-time (RTT) for all the pings that have received
responses. The value of this object MUST be set to zero when the
atmfM4VpTestStatus object transitions from notInUse(0) to inUse(1). A
value of zero for this object implies that no ping responses have been
received for the current test.ro Unsigned32 UNITS "milliseconds" .1.3.6.1.4.1.4874.2.2.8.1.5.2.1.9 |
juniAtmVcPingTableThis table contains entries for extending the ATM-FORUM-SNMP-M4-MIB
atmM4VcTestTable to do ping (multiple loopback) type testing. SEQUENCE OF JuniAtmVcPingEntry .1.3.6.1.4.1.4874.2.2.8.1.5.3 |
juniAtmVcPingEntryEach entry describes the characteristics, status and results of the
most recent ATM ping test. JuniAtmVcPingEntry .1.3.6.1.4.1.4874.2.2.8.1.5.3.1 |
juniAtmVcPingProbeCountThe number of ping probes (OAM cells) to be sent to complete the test.rw Unsigned32 .1.3.6.1.4.1.4874.2.2.8.1.5.3.1.1 |
juniAtmVcPingTimeOutSpecifies the time-out value, in seconds, for a remote ping operation.rw Unsigned32 .1.3.6.1.4.1.4874.2.2.8.1.5.3.1.2 |
juniAtmVcPingCtlTrapGenerationThe value of this object determines when and if to generate a
notification for this entry:
testCompletion(0) - Generate a juniPingTestCompleted notification.
The value of this object defaults to zero, indicating that no
notification has been selected.rw Bits .1.3.6.1.4.1.4874.2.2.8.1.5.3.1.3 |
juniAtmVcPingSentProbesThe number of ping probes (OAM cells) that have been sent thus far for
this test. The value of this object MUST be set to zero when the
atmfM4VcTestStatus object transitions from notInUse(0) to inUse(1).ro Unsigned32 UNITS "probes" .1.3.6.1.4.1.4874.2.2.8.1.5.3.1.4 |
juniAtmVcPingProbeResponsesThe number of ping responses that have been received thus far for this
test. The value of this object MUST be set to zero when the
atmfM4VcTestStatus object transitions from notInUse(0) to inUse(1).ro Unsigned32 UNITS "probes" .1.3.6.1.4.1.4874.2.2.8.1.5.3.1.5 |
juniAtmVcPingStartTimeThe time (sysUpTime) when the test started.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.8.1.5.3.1.6 |
juniAtmVcPingMinRttThe shortest round-trip-time (RTT) for the pings that have received
responses. The value of this object MUST be set to zero when the
atmfM4VcTestStatus object transitions from notInUse(0) to inUse(1). A
value of zero for this object implies that no ping responses have been
received for the current test.ro Unsigned32 UNITS "milliseconds" .1.3.6.1.4.1.4874.2.2.8.1.5.3.1.7 |
juniAtmVcPingMaxRttThe longest round-trip-time (RTT) for the pings that have received
responses. The value of this object MUST be set to zero when the
atmfM4VcTestStatus object transitions from notInUse(0) to inUse(1). A
value of zero for this object implies that no ping responses have been
received for the current test.ro Unsigned32 UNITS "milliseconds" .1.3.6.1.4.1.4874.2.2.8.1.5.3.1.8 |
juniAtmVcPingAverageRttThe average round-trip-time (RTT) for all the pings that have received
responses. The value of this object MUST be set to zero when the
atmfM4VcTestStatus object transitions from notInUse(0) to inUse(1). A
value of zero for this object implies that no ping responses have been
received for the current test.ro Unsigned32 UNITS "milliseconds" .1.3.6.1.4.1.4874.2.2.8.1.5.3.1.9 |
juniAtmPingTestCode OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.8.1.5.4 |
juniAtmPingTestCodeOamDisabledThis test code indicates that the ATM ping operation cannot be
initiated or is aborted because the juniAtmIfOamCellRxAdminState is set
to disabled. OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.8.1.5.4.1 |
juniAtmPingTestCodeCircuitDownThis test code indicates that the ATM ping operation cannot be
initiated or is aborted because the operational status of the ATM
circuit is down. OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.8.1.5.4.2 |
juniAtmPingTestCodeStoppedThis test code indicates that the ATM ping operation is
administratively stopped by an External Management. OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.8.1.5.4.3 |
juniAtmPingTestCodeOamVcOperStateThis test code indicates that the ATM ping operation cannot be
initiated or is aborted because the circuit is down because of a OAM
fault condition. This is possible if juniAtmCircuitVcOamOperStatus is
one of the following:
oamVcOperStateAisState(0) - AIS cell received or underlying
physical layer reporting transmission
path AIS.
oamVcOperStateRdiState(1) - RDI cell received. OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.8.1.5.4.4 |
juniAtmPingTestCodeMaxPingCountReachedThis test code indicates that the ping operation cannot be initiated as
the maximum number of ping possible on this interfaces exceeds the
allowable limit. OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.8.1.5.4.5 |
juniAtmPingTestCodeInvalidParamsThis Test Code identities the Ping operation cannot be initiated as one
or more of the Ping Parameters is Invalid. OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.8.1.5.4.6 |
juniAtmLocation OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.8.1.6 |
juniAtmSubIfLocationTypeDescribes the interpretation of JuniInterfaceLocationValue object
values into platform-dependent interface location components, e.g.,
'slot.port' on an ERX.ro JuniInterfaceLocationType (Juniper-TC) .1.3.6.1.4.1.4874.2.2.8.1.6.1 |
juniAtmSubIfLocationTableThe entries in this table report the ifIndex of ATM Subinterfaces by
location. SEQUENCE OF JuniAtmSubIfLocationEntry .1.3.6.1.4.1.4874.2.2.8.1.6.2 |
juniAtmSubIfLocationEntryA specification of ATM subinterfaces by location. JuniAtmSubIfLocationEntry .1.3.6.1.4.1.4874.2.2.8.1.6.2.1 |
juniAtmSubIfLocationIndexThe value of a platform interface location. JuniInterfaceLocationValue (Juniper-TC) .1.3.6.1.4.1.4874.2.2.8.1.6.2.1.1 |
juniAtmSubIfLocationIfIndexThe ifIndex value of this subinterface.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4874.2.2.8.1.6.2.1.2 |
juniAtmVcClass OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.8.1.7 |
juniAtmVcClassNameTableThe entries in this table provide mappings of ATM VC class names to
local integer identifiers. These integers are used as indexes into other
MIB tables containing ATM VC attributes associated with the same VC class name. SEQUENCE OF JuniAtmVcClassNameEntry .1.3.6.1.4.1.4874.2.2.8.1.7.1 |
juniAtmVcClassNameEntryA mapping of ATM VC class name to an integer identifier for the ATM VC class. JuniAtmVcClassNameEntry .1.3.6.1.4.1.4874.2.2.8.1.7.1.1 |
juniAtmVcClassNameThe ATM VC class name uniquely identifying this entry.ro DisplayString .1.3.6.1.4.1.4874.2.2.8.1.7.1.1.1 |
juniAtmVcClassNameRowStatusControls creation/deletion of entries in this table. Only the values
'createAndGo' ,'destroy', 'active' and 'notInService' may be SET.
The SNMP manager would set the row status to notInService before making
any VC class attribute changes explained in juniAtmVcClassTable. Once the
VC class attribute changes are complete, the SNMP manager would set the
row status to active, upon which the VC class attribute changes would
be committed. Any ATM VC class attribute changes that are made when the
row status is 'active' are committed right away.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.8.1.7.1.1.2 |
juniAtmVcClassNameIdThe integer identifier associated with this VC class name. The value of
this identifier is assigned by the device when an entry in this table
is created.ro Unsigned32 .1.3.6.1.4.1.4874.2.2.8.1.7.1.1.3 |
juniAtmVcClassIdTableProvides inverse mapping of ATM VC class IDs to ATM VC class names. SEQUENCE OF JuniAtmVcClassIdEntry .1.3.6.1.4.1.4874.2.2.8.1.7.2 |
juniAtmVcClassIdEntryA mapping of an integer identifier to an ATM VC class name. JuniAtmVcClassIdEntry .1.3.6.1.4.1.4874.2.2.8.1.7.2.1 |
juniAtmVcClassIdIdThe integer identifier associated with this ATM VC class name. Unsigned32 .1.3.6.1.4.1.4874.2.2.8.1.7.2.1.1 |
juniAtmVcClassIdNameThe ATM VC class name having the associated identifier.ro DisplayString .1.3.6.1.4.1.4874.2.2.8.1.7.2.1.2 |
juniAtmVcClassTableThis table contains Juniper ATM VC Class entries which can be used
to specify the ATM PVC attributes either at creation or modification
time. A row in this table with default values is created when an entry
in juniAtmVcClassNameTable is created. SEQUENCE OF JuniAtmVcClassEntry .1.3.6.1.4.1.4874.2.2.8.1.7.3 |
juniAtmVcClassEntryEach entry contains the attributes of the ATM VC which would be
applied to the VC either at creation or modification time when this
ATM VC class is associated to it. JuniAtmVcClassEntry .1.3.6.1.4.1.4874.2.2.8.1.7.3.1 |
juniAtmVcClassIdThe integer identifier associated with this ATM VC class. A value
for this identifier is determined by locating or creating an ATM VC
class name in the juniAtmVcClassNameTable. Unsigned32 .1.3.6.1.4.1.4874.2.2.8.1.7.3.1.1 |
juniAtmVcClassVccTypeSpecifies the encapsulation used by the circuit to carry IP datagrams.
Encapsulations are as specified in RFC1483 Multiprotocol Interconnect
over ATM. The 'autoconfig' value will recognize both VC Mux and LLC
formats. The 'aal5' and 'aal0' values are used for encapsulation
methods for transport of ATM frames and cells over IP and MPLS networks
when no encapsulation method is specified.rw Enumeration .1.3.6.1.4.1.4874.2.2.8.1.7.3.1.2 |
juniAtmVcClassVccServiceCategoryService category for this circuit:
ubr Unspecified Bit Rate (best effort).
ubrPcr Unspecified Bit Rate with Peak Cell Rate limit.
nrtVbr Non-RealTime Variable Bit Rate.
cbr Constant Bit Rate.
rtVbr Realtime Variable Bit Rate.rw Enumeration .1.3.6.1.4.1.4874.2.2.8.1.7.3.1.3 |
juniAtmVcClassVccPcrPeak Cell Rate, in kilobits per second (kbps), of this circuit.
This parameter is only required when juniAtmVcClassVccServiceCategory is
configured to have one of the following values:
ubrPcr
nrtVbr
cbr
rtVbrrw Integer32 .1.3.6.1.4.1.4874.2.2.8.1.7.3.1.4 |
juniAtmVcClassVccScrSustained Cell Rate, in kilobits per second (kbps), of this circuit.
This parameter is only required when juniAtmVcClassVccServiceCategory
is configured to have the following value:
nrtVbr
rtVbrrw Integer32 .1.3.6.1.4.1.4874.2.2.8.1.7.3.1.5 |
juniAtmVcClassVccMbsMaximum Burst Size, in cells, of this circuit.
This parameter is only required when juniAtmVcClassVccServiceCategory
is configured to have the following value:
nrtVbr
rtVbrrw Integer32 .1.3.6.1.4.1.4874.2.2.8.1.7.3.1.6 |
juniAtmVcClassVccOamAdminStatusThe OAM VC integrity administrative state of the ATM VC associated
with this class.rw Enumeration .1.3.6.1.4.1.4874.2.2.8.1.7.3.1.7 |
juniAtmVcClassVccOamLoopbackFrequencyThe OAM loopback frequency in seconds.rw Integer32 .1.3.6.1.4.1.4874.2.2.8.1.7.3.1.8 |
juniAtmVcClassVccOamUpCountSpecifies the number of successive loopback cell responses to
receive before the ATM VC associated with this class is declared
up for connectivity verification.rw Integer32 .1.3.6.1.4.1.4874.2.2.8.1.7.3.1.9 |
juniAtmVcClassVccOamDownCountSpecifies the number of successive loopback cell responses not
received before declaring the ATM VC associated with this class
as down for connectivity verification.rw Integer32 .1.3.6.1.4.1.4874.2.2.8.1.7.3.1.10 |
juniAtmVcClassVccOamRetryFrequencySpecifies the frequency (in seconds) to transmit loopback cells
when verifying the ATM VC operational state associated with this
class (up or down) for connectivity verification.rw Integer32 .1.3.6.1.4.1.4874.2.2.8.1.7.3.1.11 |
juniAtmVcClassVccOamAlarmDownCountSpecifies the number of successive alarm (AIS or RDI) cells to
receive before declaring the ATM VC associated with class as down.rw Integer32 .1.3.6.1.4.1.4874.2.2.8.1.7.3.1.12 |
juniAtmVcClassVccOamAlarmClearTimeoutSpecifies how long to wait (in seconds) before declaring the ATM VC
associated with class as up after it has stopped receiving alarm cells.rw Integer32 .1.3.6.1.4.1.4874.2.2.8.1.7.3.1.13 |
juniAtmVcClassVccInverseArpEnables the inverse ARP protocol on the ATM VC associated with this
class; true(1) enables the protocol, false(2) disables it.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.8.1.7.3.1.14 |
juniAtmVcClassVccInverseArpRefreshThe refresh rate in minutes between inverse ARP protocol messages.rw Integer32 .1.3.6.1.4.1.4874.2.2.8.1.7.3.1.15 |
juniAtmTraps OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.8.3 |
juniAtmTrapPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.8.3.0 |
juniAtmVpPingTestCompletedGenerated at the completion of a AtmfM4VpTest when the corresponding
juniAtmVpPingCtlTrapGeneration object has the testCompletion(0) bit
set. NOTIFICATION-TYPE .1.3.6.1.4.1.4874.2.2.8.3.0.1 |
juniAtmVcPingTestCompletedGenerated at the completion of a AtmfM4VcTest when the corresponding
juniAtmVcPingCtlTrapGeneration object has the testCompletion(0) bit
set. NOTIFICATION-TYPE .1.3.6.1.4.1.4874.2.2.8.3.0.2 |
juniAtmConformance OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.8.4 |
juniAtmCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.8.4.1 |
juniAtmGroups OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.8.4.2 |