LAN-TUNNELING-MIB
The LAN-TUNNELING-MIB provides configuration management and monitoring capabilities for Layer 2 tunneling protocols, specifically enabling the tracking of tunnel interface states, encapsulation parameters, and associated error counters on network devices. This module facilitates the administration of virtual LAN extensions and point-to-point tunneling sessions to ensure connectivity integrity across segmented network infrastructures.
Imported Objects
Objects
10 total| Object Name |
|---|
pgLantMIBThe module defines MIB for LAN Tunneling configuration MODULE-IDENTITY .1.3.6.1.4.1.927.1.9.2 |
pgLantObjects OBJECT IDENTIFIER .1.3.6.1.4.1.927.1.9.2.1 |
pgLantTableA table of encapsulation and forwarding information for the LAN Tunneling service SEQUENCE OF PgLantEntry .1.3.6.1.4.1.927.1.9.2.1.1 |
pgLantEntryThe encapsulation and forwarding information for one the LAN Tunnel PgLantEntry .1.3.6.1.4.1.927.1.9.2.1.1.1 |
pgLantChannelPortIfIndexThe Interface Index for the channel(xDSL) port that is to be connected to a PVC tunnel.ro INTEGER .1.3.6.1.4.1.927.1.9.2.1.1.1.1 |
pgLantLinePortIfIndexThe Interface Index for the line(OC3) port that the PVC is resided.rw INTEGER .1.3.6.1.4.1.927.1.9.2.1.1.1.2 |
pgLantVpiThe internal VPI for the ATM PVC that is connected to the tunnelrw INTEGER .1.3.6.1.4.1.927.1.9.2.1.1.1.3 |
pgLantVciThe internal VCI for the ATM PVC that is connected to the tunnelrw INTEGER .1.3.6.1.4.1.927.1.9.2.1.1.1.4 |
pgLantEncapModeThe encapsulation mode that is used by the tunnelrw PgLantEncapType .1.3.6.1.4.1.927.1.9.2.1.1.1.5 |
pgLantRowStatusThis object allows entries to be created and deleted in the pgLantTable. The RowStatus should be out of the ACTIVE state for other columns to be modified.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.927.1.9.2.1.1.1.6 |
More MIBs from Pairgain
Browse all PairgainMIBs →Standard SNMP MIB module defining data structures for PAIRGAIN-ETSI-HDSL-MIB.
The PAIRGAIN-SDSL-MIB enables monitoring and management of PairGain SDSL (Symmetric Digital Subscriber Line) access equipment, specifically tracking physical layer parameters such as line status, attenuation, noise margins, and data transmission rates. It provides standardized access to interface statistics, error counters, and configuration states required for maintaining SDSL circuit integrity and performance.
SNMP MIB module
PAIRGAIN-SDSLCELL-MIB provides management access to PairGain SDSL (Single Digital Subscriber Line) hardware for monitoring cell-based transmission parameters, including physical layer status, error counters, and active session statistics. This module enables the tracking of line performance metrics such as CRC errors, cell loss, and synchronization states specific to the SDSL cell architecture.
Standard SNMP MIB module defining data structures for PAIRGAIN-COMMON-HD-MIB.
Standard SNMP MIB module defining data structures for PAIRGAIN-ETHERPHONE-MIB.