PAIRGAIN-SDSL-MIB
AI MIB Summary
The PAIRGAIN-SDSL-MIB enables monitoring and management of PairGain SDSL (Symmetric Digital Subscriber Line) access equipment, specifically tracking physical layer parameters such as line status, attenuation, noise margins, and data transmission rates. It provides standardized access to interface statistics, error counters, and configuration states required for maintaining SDSL circuit integrity and performance.
The module defines the SDSL MIB
Main OID:
pgsdslMIB.1.3.6.1.4.1.927.1.13.1
111
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
111 total| Object Name |
|---|
pgsdslMIBThe module defines the SDSL MIB MODULE-IDENTITY .1.3.6.1.4.1.927.1.13.1 |
SNMPv2-SMIThe module defines the SDSL MIB Unknown .1.3.6.1.4.1.927.1.13.1 |
sdslMibObjects OBJECT IDENTIFIER .1.3.6.1.4.1.927.1.13.1.1 |
sdsl15mPerformanceTableThis table provides the 15-minute performance history monitoring
of the last 24 hours for all SDSL Errored Seconds (ES),
and Unavailable Seconds (UAS). SEQUENCE OF Sdsl15mPerformanceEntry .1.3.6.1.4.1.927.1.13.1.1.1 |
sdsl15mPerformanceEntryEntries of the SDSL 15-min performance table. All 96 entries for a
24 hour period are zeroed out and available at power up. Not all
of the returned values are legitimate until the appropriate amount of time
has elapsed. Sdsl15mPerformanceEntry .1.3.6.1.4.1.927.1.13.1.1.1.1 |
sdsl15mHistoryIdIdentifies the history ID within the 96 15-minute performance
history.ro Short .1.3.6.1.4.1.927.1.13.1.1.1.1.1 |
sdsl15mESNetSDSL 15-min ES count on Network side of the span.ro Short .1.3.6.1.4.1.927.1.13.1.1.1.1.2 |
sdsl15mUASNetSDSL 15-min UAS count on Network side of the span.ro Short .1.3.6.1.4.1.927.1.13.1.1.1.1.3 |
sdsl15mESCustSDSL 15-min ES count on the Customer side of the span.ro Short .1.3.6.1.4.1.927.1.13.1.1.1.1.4 |
sdsl15mUASCustSDSL 15-min UAS count on the Customer side of the span.ro Short .1.3.6.1.4.1.927.1.13.1.1.1.1.5 |
sdsl24hPerformanceTableThis table provides 24-hour performance history monitoring of the
last 7 days for all SDSL Errored Seconds (ES), and Unavailable
Seconds (UAS). All 7 entries for the 7-day history are zeroed out
and available at power up. Not all of the returned values are
legitimate until the appropriate number of days has elapsed. SEQUENCE OF Sdsl24hPerformanceEntry .1.3.6.1.4.1.927.1.13.1.1.2 |
sdsl24hPerformanceEntryEntries of the SDSL 24-hour performance table Sdsl24hPerformanceEntry .1.3.6.1.4.1.927.1.13.1.1.2.1 |
sdsl24hHistoryIdIdentify the history ID within the 7 24-hour performance
history.ro Short .1.3.6.1.4.1.927.1.13.1.1.2.1.1 |
sdsl24hESNetSDSL 24-hour ES count on the Network side of the span.ro Short .1.3.6.1.4.1.927.1.13.1.1.2.1.2 |
sdsl24hUASNetSDSL 24-hour UAS count on the Network side of the span.ro Short .1.3.6.1.4.1.927.1.13.1.1.2.1.3 |
sdsl24hESCustSDSL 24-hour ES count on the Customer side of the span.ro Short .1.3.6.1.4.1.927.1.13.1.1.2.1.4 |
sdsl24hUASCustSDSL 24-hour UAS count on the Customer side of the span.ro Short .1.3.6.1.4.1.927.1.13.1.1.2.1.5 |
sdslCurr24hPerformanceTableThis table provides the current 24-hour performance history
monitoring for all SDSL Errored Seconds (ES),
and Unavailable Seconds (UAS). SEQUENCE OF SdslCurr24hPerformanceEntry .1.3.6.1.4.1.927.1.13.1.1.3 |
sdslCurr24hPerformanceEntryEntries of the SDSL Current 24-hour PM counts table SdslCurr24hPerformanceEntry .1.3.6.1.4.1.927.1.13.1.1.3.1 |
sdslCurr24hESNetSDSL Current 24-hour ES count on the Network side of the span.ro Short .1.3.6.1.4.1.927.1.13.1.1.3.1.1 |
sdslCurr24hUASNetSDSL 24-hour UAS count on the Network side of the span.ro Short .1.3.6.1.4.1.927.1.13.1.1.3.1.2 |
sdslCurr24hESCustSDSL 24-hour ES count on the Customer side of the span.ro Short .1.3.6.1.4.1.927.1.13.1.1.3.1.3 |
sdslCurr24hUASCustSDSL 24-hour UAS count on the Customer side of the span.ro Short .1.3.6.1.4.1.927.1.13.1.1.3.1.4 |
sdslStatisticsTableThis table lists statistics for margin, and pulse attenuation,
of the SDSL loop. SEQUENCE OF SdslStatisticsEntry .1.3.6.1.4.1.927.1.13.1.1.4 |
sdslStatisticsEntryEntries of the SDSL line statistics table SdslStatisticsEntry .1.3.6.1.4.1.927.1.13.1.1.4.1 |
sdslTipRingReversalCurrent TIP/RING state on the SDSL span:
0 - TIP/RING is not reversed.
1 - TIP/RING is reversed.ro Byte .1.3.6.1.4.1.927.1.13.1.1.4.1.1 |
sdslUpStateCurrent loop state of the span:
0 - loop is up.
1 - loop is acquiring/converging.
2 - loop is signaling.ro Byte .1.3.6.1.4.1.927.1.13.1.1.4.1.2 |
sdslMarginNetCurrent Margin on the Network side of the span.ro Byte .1.3.6.1.4.1.927.1.13.1.1.4.1.3 |
sdslMarginHighNetHighest Margin on the Network side of the span.ro Byte .1.3.6.1.4.1.927.1.13.1.1.4.1.4 |
sdslMarginLowNetLowest Margin on the Network side of the span.ro Byte .1.3.6.1.4.1.927.1.13.1.1.4.1.5 |
sdslPulseAttenuationNetPulse Attenuation on the Network side of the span.ro Byte .1.3.6.1.4.1.927.1.13.1.1.4.1.6 |
sdslMarginCustCurrent Margin on the Customer side of the span.ro Byte .1.3.6.1.4.1.927.1.13.1.1.4.1.7 |
sdslMarginHighCustHighest Margin on the Customer side of the span.ro Byte .1.3.6.1.4.1.927.1.13.1.1.4.1.8 |
sdslMarginLowCustLowest Margin on the Customer side of the span.ro Byte .1.3.6.1.4.1.927.1.13.1.1.4.1.9 |
sdslPulseAttenuationCustPulse Attenuation on the Customer side of the span.ro Byte .1.3.6.1.4.1.927.1.13.1.1.4.1.10 |
sdslLineTableThis table lists which Profiles (located at the AMC) are
assigned to the particular SDSL Line. SEQUENCE OF SdslLineEntry .1.3.6.1.4.1.927.1.13.1.1.5 |
sdslLineEntryEntries of the SDSL line table SdslLineEntry .1.3.6.1.4.1.927.1.13.1.1.5.1 |
sdslLineConfProfileThe value of this object identifies the row
in the SDSL Line Configuration Profile Table,
(sdslLineConfProfileTable), which applies for this
SDSL line. The Profiles are stored on the Management
card. In the case which the configuration
profile has not been set, the value will be set to '0'.rw SdslLineProfileType .1.3.6.1.4.1.927.1.13.1.1.5.1.1 |
sdslLineAlarmConfProfileThe value of this object identifies the row
in the SDSL Line Alarm Configuration Profile Table,
(sdslLineAlarmConfProfileTable), which applies for this
SDSL line. In the case which the configuration
profile has not been set, the value will be set to '0'.rw SdslLineProfileType .1.3.6.1.4.1.927.1.13.1.1.5.1.2 |
sdslAlarmTableThis table provides the SDSL alarms indication. SEQUENCE OF SdslAlarmEntry .1.3.6.1.4.1.927.1.13.1.1.6 |
sdslAlarmEntryEntries of the SDSL span alarm table SdslAlarmEntry .1.3.6.1.4.1.927.1.13.1.1.6.1 |
sdslMarginAlarmNetMargin Threshold Exceeded on the Network side of the span.ro Byte .1.3.6.1.4.1.927.1.13.1.1.6.1.1 |
sdslESAlarmNetErrored Seconds threshold exceeded on the Network side
of the span.ro Byte .1.3.6.1.4.1.927.1.13.1.1.6.1.2 |
sdslUASAlarmNetUnavailable Seconds threshold exceeded on the Network
side of the span.ro Byte .1.3.6.1.4.1.927.1.13.1.1.6.1.3 |
sdslMarginAlarmCustMargin Threshold Exceeded on the Customer side of the span.ro Byte .1.3.6.1.4.1.927.1.13.1.1.6.1.4 |
sdslESAlarmCustErrored Seconds Exceeded on the Customer side of the span.ro Byte .1.3.6.1.4.1.927.1.13.1.1.6.1.5 |
sdslUASAlarmCustUnavailable Seconds threshold exceeded on the customer side
of the span.ro Byte .1.3.6.1.4.1.927.1.13.1.1.6.1.6 |
sdslLOSWAlarmLoss of Sync Word (LOSW) occurred on the Network side of
the SDSL loop.ro Byte .1.3.6.1.4.1.927.1.13.1.1.6.1.7 |
sdslAlarmHistoryTableThis table provides the SDSL alarms history SEQUENCE OF SdslAlarmHistoryEntry .1.3.6.1.4.1.927.1.13.1.1.7 |
sdslAlarmHistoryEntryEntries of the SDSL Alarm History table SdslAlarmHistoryEntry .1.3.6.1.4.1.927.1.13.1.1.7.1 |
sdslMarginAlarmFirstDate and time Margin threshold exceeded alarm first occurredro PgSdslTimeStamp .1.3.6.1.4.1.927.1.13.1.1.7.1.1 |
sdslMarginAlarmLastDate and time Margin threshold exceeded alarm last occurredro PgSdslTimeStamp .1.3.6.1.4.1.927.1.13.1.1.7.1.2 |
sdslMarginAlarmCountThe number of times the Margin threshold exceeded alarm has
occurredro Short .1.3.6.1.4.1.927.1.13.1.1.7.1.3 |
sdslESAlarmFirstDate and time Errored Seconds threshold exceeded alarm first occurredro PgSdslTimeStamp .1.3.6.1.4.1.927.1.13.1.1.7.1.4 |
sdslESAlarmLastDate and time Errored Seconds threshold exceeded alarm last occurredro PgSdslTimeStamp .1.3.6.1.4.1.927.1.13.1.1.7.1.5 |
sdslESAlarmCountThe number of times the Errored Seconds threshold exceeded alarm has
occurredro Short .1.3.6.1.4.1.927.1.13.1.1.7.1.6 |
sdslUASAlarmFirstDate and time Unavailable Seconds threshold exceeded alarm
occurredro PgSdslTimeStamp .1.3.6.1.4.1.927.1.13.1.1.7.1.7 |
sdslUASAlarmLastDate and time Unavailable Seconds threshold exceeded alarm
last occurredro PgSdslTimeStamp .1.3.6.1.4.1.927.1.13.1.1.7.1.8 |
sdslUASAlarmCountThe number of times the Unavailable Seconds threshold exceeded alarm
has occurredro Short .1.3.6.1.4.1.927.1.13.1.1.7.1.9 |
sdslLOSWAlarmFirstDate and time the Loss of Sync Word alarm first occurredro PgSdslTimeStamp .1.3.6.1.4.1.927.1.13.1.1.7.1.10 |
sdslLOSWAlarmLastDate and time the Loss of Sync Word alarm last occurredro PgSdslTimeStamp .1.3.6.1.4.1.927.1.13.1.1.7.1.11 |
sdslLOSWAlarmCountThe number of times the Loss of Sync Word alarm
has occurred.ro Short .1.3.6.1.4.1.927.1.13.1.1.7.1.12 |
sdslLineConfProfileIndexNextThis object contains an appropriate value to
be used for sdslLineConfProfileIndex when creating
entries in the sdslLineConfProfileTable. The value
'0' indicates that no unassigned entries are
available. To obtain the sdslLineConfProfileIndexNext
value for a new entry, the manager issues a
management protocol retrieval operation to obtain
the current value of this object. After each
retrieval, the agent should modify the value to
the next unassigned index.
If the implementator of this MIB has choosen not
to implement 'dynamic assignment' of profiles, this
object is not useful and should return noSuchName
upon SNMP request.ro INTEGER .1.3.6.1.4.1.927.1.13.1.1.8 |
sdslLineConfProfileTableThis table contains information on the sdsl line
configuration. One entry in this table reflects a
profile defined by a manager which can be used to
configure the sdsl line. SEQUENCE OF SdslLineConfProfileEntry .1.3.6.1.4.1.927.1.13.1.1.9 |
sdslLineConfProfileEntryEach entry consists of a list of parameters that
represents the configuration of an sdsl port. A
profile is created in one step with all necessary
parameter values and sdslLineProfileRowStatus set to
createAndGo. This RowStatus object is also used
to delete destroy profiles. SdslLineConfProfileEntry .1.3.6.1.4.1.927.1.13.1.1.9.1 |
sdslLineConfProfileIndexThis object is used by the line configuration
table in order to identify a row of this table SdslLineProfileType .1.3.6.1.4.1.927.1.13.1.1.9.1.1 |
sdslRateModeRate Mode defined in Rate Selective/Adaptive Specification
for SDSL Products.
Mode 1 - Fixed Rate (FR) - The channel shall operate at the
rate set by the sdslRate parameter and supported at the remote unit
either by default, manual switch setting, or Smart Manual mode on
the modem. Support of the two-level signalling mechanism at the
remote is known as Smart Manual mode. The remote unit is
configured via a two-level signaling mechanism prior to the normal
startup sequence. This mechanism allows the link rate to be
controlled by the Central Office shelf.
If the remote modem does not support the two-level signaling
mechanism, the system will timeout and the default startup sequence
will begin.
Mode 2 - Rate Adaptive (RA) - NOT supported in this MIB yet.
Allows the unit to evaluate the characteristics of the SDSL
channel and adapt the data rate based upon user-defined performance
criteria.rw INTEGER .1.3.6.1.4.1.927.1.13.1.1.9.1.2 |
sdslRemFeaturesThis will variable will reflect the features supported by
the remote unit (modem) which are received during the two-level signaling
mechanism that occurs before the start-up sequence.rw Short .1.3.6.1.4.1.927.1.13.1.1.9.1.3 |
sdslRateThe desired rate for the particular SDSL span. Set at the CO using
management softwarerw INTEGER .1.3.6.1.4.1.927.1.13.1.1.9.1.4 |
sdslLineConfProfileRowStatusThis object is used to create a new row or modify or
delete an existing row in this table.
If the implementator of this MIB has choosen not
to implement 'dynamic assignment' of profiles, this
object is not useful and should return noSuchName
upon SNMP request.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.927.1.13.1.1.9.1.5 |
sdslLineAlarmConfProfileIndexNextThis object contains an appropriate value to
be used for sdslLineAlarmConfProfileIndex when creating
entries in the sdslLineAlarmConfTable. The value
'0' indicates that no unassigned entries are available.
To obtain the sdslLineAlarmConfProfileIndexNext
value for a new entry, the manager issues a
management protocol retrieval operation to obtain
the current value of this object. After each
retrieval, the agent should modify the value to
the next unassigned index.
If the implementator of this MIB has choosen not
to implement 'dynamic assignment' of profiles, this
object is not useful and should return noSuchName
upon SNMP request.ro INTEGER .1.3.6.1.4.1.927.1.13.1.1.10 |
sdslLineAlarmConfProfileTableThis table contains information on the sdsl line
configuration. One entry in this table reflects a
profile defined by a manager which can be used to
configure the modem for a physical line SEQUENCE OF SdslLineAlarmConfProfileEntry .1.3.6.1.4.1.927.1.13.1.1.11 |
sdslLineAlarmConfProfileEntryEach entry consists of a list of parameters that
represents the alarm configuration for one sdsl line. A
profile is created in one step with all necessary
parameter values and sdslLineAlarmConfProfileRowStatus
set to createAndGo. This RowStatus object is also
used to delete destroy profiles.
Each entry is taken from the original Pairgain SDSL MIB called
sdslAlarmSeverityEntry which provided: severity settings
for SDSL alarms reporting and threshold settings for
Errored Second(ES), Margin(MAR), Unavailable Seconds(UAS). SdslLineAlarmConfProfileEntry .1.3.6.1.4.1.927.1.13.1.1.11.1 |
sdslLineAlarmConfProfileIndexThis object is used by the line alarm configuration
table in order to identify a row of this table SdslLineProfileType .1.3.6.1.4.1.927.1.13.1.1.11.1.1 |
sdslLOSWAlarmSettingSets the severity for Loss of Sync Word alarm.rw PgSdslAlarmSeverityMode .1.3.6.1.4.1.927.1.13.1.1.11.1.2 |
sdslMarginThresholdSets the SDSL Margin threshold value.rw Byte .1.3.6.1.4.1.927.1.13.1.1.11.1.3 |
sdslMarginAlarmSettingSets the severity for Margin threshold exceeded alarm.rw PgSdslAlarmSeverityMode .1.3.6.1.4.1.927.1.13.1.1.11.1.4 |
sdslESThresholdSets the SDSL Errored Seconds threshold value.rw Byte .1.3.6.1.4.1.927.1.13.1.1.11.1.5 |
sdslESAlarmSettingSets the severity for Errored Seconds threshold exceeded alarm.rw PgSdslAlarmSeverityMode .1.3.6.1.4.1.927.1.13.1.1.11.1.6 |
sdslUASThresholdSets the SDSL Unavailable Seconds threshold value.rw Byte .1.3.6.1.4.1.927.1.13.1.1.11.1.7 |
sdslUASAlarmSettingSets the severity for UAS threshold exceeded alarm.rw PgSdslAlarmSeverityMode .1.3.6.1.4.1.927.1.13.1.1.11.1.8 |
sdslLineAlarmConfProfileRowStatusThis object is used to create a new row or modify or
delete an existing row in this table.
If the implementator of this MIB has choosen not
to implement 'dynamic assignment' of profiles, this
object is not useful and should return noSuchName
upon SNMP request.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.927.1.13.1.1.11.1.9 |
pgSdslModGenTableThis table provides general information about the SDSL
modem.
pgSdslModGenVersionNum: Contains the Modem software version number
pgSdslModGenListNum: When used with the vendor number the list
number provides a unique model number identifier for the modem.
pgSdslModGenVendNum: A unique number given to every Pairgain product.
pgSdslModGenFeatures A 32 bit flag that has bits set according to
feature supported by the modem.
pgSdslModGenSerialNum 16 bits, used with manufacturing date to give unique
identifier for the modem.
pgSdslModGenMfgDate 16 bit, used with the Serial number to give a unique
identifier for the modem. SEQUENCE OF PgSdslModGenEntry .1.3.6.1.4.1.927.1.13.1.1.12 |
pgSdslModGenEntryEntries (one per port) for general modem information. PgSdslModGenEntry .1.3.6.1.4.1.927.1.13.1.1.12.1 |
pgSdslModGenVersionNumIdentifies the software version number of the modem.ro Byte .1.3.6.1.4.1.927.1.13.1.1.12.1.1 |
pgSdslModGenListNumIdentifies the list number of the modem.ro Byte .1.3.6.1.4.1.927.1.13.1.1.12.1.2 |
pgSdslModGenVendNumIdentifies the vendor number of the modem. The vendor number
is a Pair Gain product unique identifier.ro Byte .1.3.6.1.4.1.927.1.13.1.1.12.1.3 |
pgSdslModGenFeaturesContains the feature bytes from the modem.ro Integer32 .1.3.6.1.4.1.927.1.13.1.1.12.1.4 |
pgSdslModGenSerialNumContains the Serial number of the modem read from the
modem's NVRAM.ro Short .1.3.6.1.4.1.927.1.13.1.1.12.1.5 |
pgSdslModGenMfgDateContains the Manufacturing date of the modem read from the
modem's NVRAM.ro Short .1.3.6.1.4.1.927.1.13.1.1.12.1.6 |
pgSdslModStatTableThis table provides modem statistics gathered
from the modem through EOC messages. These statistics
correspond to a subset of those in the standard ifTable.
Ethernet port statistics are given in the following objects:
pgSdslModEthOperStatus: the status of the ethernet link.
pgSdslModEthInOctets
pgSdslModEthInUcastPkts
pgSdslModEthInNUcastPkts
pgSdslModEthInDiscards
pgSdslModEthInErrors
pgSdslModEthOutOctets
pgSdslModEthOutUcastPkts
pgSdslModEthOutNUcastPkts
pgSdslModEthOutErrors
SDSL port statistics are given in the following objects:
pgSdslModDslInOctets
pgSdslModDslInUcastPkts
pgSdslModDslInNUcastPkts
pgSdslModDslInDiscards
pgSdslModDslInErrors
pgSdslModDslOutOctets
pgSdslModDslOutUcastPkts
pgSdslModDslOutNUcastPkts
pgSdslModDslOutErrors SEQUENCE OF PgSdslModStatEntry .1.3.6.1.4.1.927.1.13.1.1.13 |
pgSdslModStatEntryEntries (one per port) for the modem statistics. PgSdslModStatEntry .1.3.6.1.4.1.927.1.13.1.1.13.1 |
pgSdslModEthOperStatusIdentifies the status of the modem's ethernet port. Up or Downro Enumeration .1.3.6.1.4.1.927.1.13.1.1.13.1.1 |
pgSdslModEthInOctetsmodem's Ethernet ifInOctet countro Counter32 .1.3.6.1.4.1.927.1.13.1.1.13.1.2 |
pgSdslModEthInUcastPktsmodem's Ethernet ifInUcastPkts countro Counter32 .1.3.6.1.4.1.927.1.13.1.1.13.1.3 |
pgSdslModEthInNUcastPktsmodem's Ethernet ifNUcastPkts countro Counter32 .1.3.6.1.4.1.927.1.13.1.1.13.1.4 |
pgSdslModEthInDiscardsmodem's Ethernet ifInDiscards countro Counter32 .1.3.6.1.4.1.927.1.13.1.1.13.1.5 |
pgSdslModEthInErrorsmodem's Ethernet ifInErrors countro Counter32 .1.3.6.1.4.1.927.1.13.1.1.13.1.6 |
pgSdslModEthOutOctetsmodem's Ethernet ifOutOctets countro Counter32 .1.3.6.1.4.1.927.1.13.1.1.13.1.7 |
pgSdslModEthOutUcastPktsmodem's Ethernet ifOutUcastPkts countro Counter32 .1.3.6.1.4.1.927.1.13.1.1.13.1.8 |
pgSdslModEthOutNUcastPktsmodem's Ethernet ifOutNUcastPkts countro Counter32 .1.3.6.1.4.1.927.1.13.1.1.13.1.9 |
pgSdslModEthOutErrorsmodem's Ethernet ifOutErrors countro Counter32 .1.3.6.1.4.1.927.1.13.1.1.13.1.10 |
pgSdslModDslInOctetsmodem's Dsl ifInOctets countro Counter32 .1.3.6.1.4.1.927.1.13.1.1.13.1.11 |
pgSdslModDslInUcastPktsmodem's Dsl ifInUcastPkts countro Counter32 .1.3.6.1.4.1.927.1.13.1.1.13.1.12 |
pgSdslModDslInNUcastPktsmodem's Dsl ifInNUcastPkts countro Counter32 .1.3.6.1.4.1.927.1.13.1.1.13.1.13 |
pgSdslModDslInDiscardsmodem's Dsl ifInDiscards countro Counter32 .1.3.6.1.4.1.927.1.13.1.1.13.1.14 |
pgSdslModDslInErrorsmodem's Dsl ifInErrors countro Counter32 .1.3.6.1.4.1.927.1.13.1.1.13.1.15 |
pgSdslModDslOutOctetsmodem's Dsl ifOutOctets countro Counter32 .1.3.6.1.4.1.927.1.13.1.1.13.1.16 |
pgSdslModDslOutUcastPktsmodem's Dsl ifOutUcastPkts countro Counter32 .1.3.6.1.4.1.927.1.13.1.1.13.1.17 |
pgSdslModDslOutNUcastPktsmodem's Dsl ifOutNUcastPkts countro Counter32 .1.3.6.1.4.1.927.1.13.1.1.13.1.18 |
pgSdslModDslOutErrorsmodem's Dsl ifOutErrors countro Counter32 .1.3.6.1.4.1.927.1.13.1.1.13.1.19 |