PAIRGAIN-SDSLCELL-MIB
AI MIB Summary
PAIRGAIN-SDSLCELL-MIB provides management access to PairGain SDSL (Single Digital Subscriber Line) hardware for monitoring cell-based transmission parameters, including physical layer status, error counters, and active session statistics. This module enables the tracking of line performance metrics such as CRC errors, cell loss, and synchronization states specific to the SDSL cell architecture.
The module defines the SDSL CELL MIB
Main OID:
pgsdslCellMIB.1.3.6.1.4.1.927.1.14.1
81
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
81 total| Object Name |
|---|
pgsdslCellMIBThe module defines the SDSL CELL MIB MODULE-IDENTITY .1.3.6.1.4.1.927.1.14.1 |
SNMPv2-SMIThe module defines the SDSL CELL MIB Unknown .1.3.6.1.4.1.927.1.14.1 |
pgsdslCellMibObjects OBJECT IDENTIFIER .1.3.6.1.4.1.927.1.14.1.1 |
pgSdslCellLineTableThis table contains the information pointers used to configure
each physical line/port of the SDSL Cell card.
Each line/port is assigned the index of a Line Profile which
characterizes the speed and other characteristics of the line/port.
Each line/port is also assigned the index of an Alarm Profile
which characterizes the alarm settings of the line/port. SEQUENCE OF PgSdslCellLineEntry .1.3.6.1.4.1.927.1.14.1.1.1 |
pgSdslCellLineEntryThis entry contains the indexes of the Line and Alarm Profiles
that are assigned to the physical interface indexed by the ifIndex. PgSdslCellLineEntry .1.3.6.1.4.1.927.1.14.1.1.1.1 |
pgSdslCellLineProfileThe value of this object identifies the row
in the Cell SDSL Line Configuration Profile Table,
(pgSdslCellLineProfileTable), which applies for this
Cell SDSL line. In the case which the configuration
profile has not been set, the value will be set to '0'.
If the implementator of this MIB has choosen not
to implement 'dynamic assignment' of profiles, this
object is not useful and should return noSuchName
upon SNMP request.rw PgSdslcellLineProfileType .1.3.6.1.4.1.927.1.14.1.1.1.1.1 |
pgSdslCellAlarmProfileThe value of this object identifies the row
in the Cell SDSL Line Alarm Configuration Profile Table,
(pgSdslCellLineAlarmProfileTable), which applies to this
Cell SDSL line. In the case which the configuration profile
has not been set, the value will be set to '0'.
If the implementator of this MIB has choosen not
to implement 'dynamic assignment' of profiles, this
object is not useful and should return noSuchName
upon SNMP request.rw PgSdslcellAlarmProfileType .1.3.6.1.4.1.927.1.14.1.1.1.1.2 |
pgSdslCellPhysTableThis table provides one row for each port.
Each row contains the Physical Layer Parameters
table for that port. SEQUENCE OF PgSdslCellPhysEntry .1.3.6.1.4.1.927.1.14.1.1.2 |
pgSdslCellPhysEntryAn entry in the pgSdslCellPhysTable. PgSdslCellPhysEntry .1.3.6.1.4.1.927.1.14.1.1.2.1 |
pgSdslCellInvSerialNumberVendor specific string that identifies the vendor
equipment.ro DisplayString .1.3.6.1.4.1.927.1.14.1.1.2.1.1 |
pgSdslCellInvVendorIDThe vendor ID assigned by T1E1.413 according to its
Annex D.ro Integer32 .1.3.6.1.4.1.927.1.14.1.1.2.1.2 |
pgSdslCellInvVersionNumberVendor specific Version numberro Integer32 .1.3.6.1.4.1.927.1.14.1.1.2.1.3 |
pgSdslCellCurrSnrMgnNoise Margin as seen by this ATU with respect to its
received signal in tenth dB.ro INTEGER .1.3.6.1.4.1.927.1.14.1.1.2.1.4 |
pgSdslCellCurrAtnMeasured difference in the total power transmitted by
the peer and the total power received by this end.
This is measured in in tenth dB.ro INTEGER .1.3.6.1.4.1.927.1.14.1.1.2.1.5 |
pgSdslCellCurrStatusStatus indicates the state of the Port. This value is
intended to give more detail than is currently available
through the ifOperStatus.
UP (1) - SDSL line is in data mode, it is
synchronized.
DOWN (2) - SDSL is down and no CPE has been
recognized
HAND (3) - SDSL is down but a CPE has been
recognized and SDSL training is in
progress (handshake phase)
TEST (4) - SDSL line is in a test mode
FAIL (5) - SDSL line is down and had some
unrecoverable hardware failure or
transceiver is missing
This is intended to supplement ifOperStatus.ro Enumeration .1.3.6.1.4.1.927.1.14.1.1.2.1.6 |
pgSdslCellLineProfileIndexNextThis object contains an appropriate value to
be used for pgSdslCellLineProfileIndex when creating
entries in the pgSdslCellLineProfileTable. The value
'0' indicates that no unassigned entries are
available. To obtain the pgSdslCellLineProfileIndexNext
value for a new entry, the manager issues a
management protocol retrieval operation to obtain
the current value of this object. After each
retrieval, the agent should modify the value to
the next unassigned index.
If the implementator of this MIB has choosen not
to implement 'dynamic assignment' of profiles, this
object is not useful and should return noSuchName
upon SNMP request.ro INTEGER .1.3.6.1.4.1.927.1.14.1.1.3 |
pgSdslCellLineProfileTableThis table contains information on the Cell-SDSL line
configuration. One entry in this table reflects a
profile defined by a manager which can be used to
configure the Cell-SDSL line. SEQUENCE OF PgSdslCellLineProfileEntry .1.3.6.1.4.1.927.1.14.1.1.4 |
pgSdslCellLineProfileEntryEach entry consists of a list of parameters that
represents the configuration of an SDSL Cell. A
profile is created in one step with all necessary
parameter values and pgSdslCellLineProfileRowStatus set to
createAndGo. This RowStatus object is also used
to delete destroy profiles. PgSdslCellLineProfileEntry .1.3.6.1.4.1.927.1.14.1.1.4.1 |
pgSdslCellLineProfileIndexThis object is used by the line configuration
table in order to identify a row of this tablerw PgSdslcellLineProfileType .1.3.6.1.4.1.927.1.14.1.1.4.1.1 |
pgSdslCellLineProfileRowStatusThis object is used to create a new row or modify or
delete an existing row in this table.
A profile activated by setting this object to
`active'. When `active' is set, the system
will validate the profile.
Before a profile can be deleted or taken out of
service, (by setting this object to `destroy' or
`outOfService') it must be first unreferenced
from all associated ports.
If the implementator of this MIB has chosen not
to implement `dynamic assignment' of profiles, this
object's MIN-ACCESS is read-only and its value
is always to be `active'.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.927.1.14.1.1.4.1.2 |
pgSdslCellLineCodeSpecifies the SDSL coding type used on this line.
Other types may be added in the future.rw Enumeration .1.3.6.1.4.1.927.1.14.1.1.4.1.3 |
pgSdslCellLineRateModeDefines what form of transmit rate adaptation is
configured on this port. See chipset description for more
information.rw Enumeration .1.3.6.1.4.1.927.1.14.1.1.4.1.4 |
pgSdslCellLineRateDefines the rate of this port , if RateMode is set to fixedrw INTEGER .1.3.6.1.4.1.927.1.14.1.1.4.1.5 |
pgSdslCellLineTermTypeDefines the mode of the transceiver ,intend for testing onlyrw Enumeration .1.3.6.1.4.1.927.1.14.1.1.4.1.6 |
pgSdslCellLineProfileInUseDefines whether this profile is in use. The agent must insure that
this object is up to date whenever the line table is updated.
If the implementator of this MIB has choosen not
to implement this feature, this object
should return noSuchName upon SNMP request.ro Enumeration .1.3.6.1.4.1.927.1.14.1.1.4.1.7 |
pgSdslCellAlarmProfileIndexNextThis object contains an appropriate value to
be used for pgSdslCellAlarmProfileIndex when creating
entries in the pgSdslCellAlarmProfileTable. The value
'0' indicates that no unassigned entries are
available. To obtain the pgSdslCellAlarmProfileIndexNext
value for a new entry, the manager issues a
management protocol retrieval operation to obtain
the current value of this object. After each
retrieval, the agent should modify the value to
the next unassigned index.
If the implementator of this MIB has choosen not
to implement 'dynamic assignment' of profiles, this
object is not useful and should return noSuchName
upon SNMP request.ro INTEGER .1.3.6.1.4.1.927.1.14.1.1.5 |
pgSdslCellAlarmProfileTableThis table contains information on the Cell-SDSL Alarm
configuration. One entry in this table reflects a
profile defined by a manager which can be used to
configure the Cell-SDSL line Alarms. SEQUENCE OF PgSdslCellAlarmProfileEntry .1.3.6.1.4.1.927.1.14.1.1.6 |
pgSdslCellAlarmProfileEntryEach entry consists of a list of parameters that
represents the Alarm configuration of an Cell SDSL port. A
profile is created in one step with all necessary
parameter values and pgSdslCellAlarmProfileRowStatus set to
createAndGo. This RowStatus object is also used
to delete destroy profiles. PgSdslCellAlarmProfileEntry .1.3.6.1.4.1.927.1.14.1.1.6.1 |
pgSdslCellAlarmProfileIndexThis object is used by the line alarm configuration
table in order to identify a row of this tablerw PgSdslcellAlarmProfileType .1.3.6.1.4.1.927.1.14.1.1.6.1.1 |
pgSdslCellAlarmProfileRowStatusThis object is used to create a new row or modify or
delete an existing row in this table.
A profile activated by setting this object to
`active'. When `active' is set, the system
will validate the profile.
Before a profile can be deleted or taken out of
service, (by setting this object to `destroy' or
`outOfService') it must be first unreferenced
from all associated ports.
If the implementator of this MIB has chosen not
to implement `dynamic assignment' of profiles, this
object's MIN-ACCESS is read-only and its value
is always to be `active'.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.927.1.14.1.1.6.1.2 |
pgSdslCellThresh15MinLOSSThe number of Loss of Signal Seconds,
encountered by an Cell SDSL interface within any given 15
minutes performance data collection period, which causes
the SNMP agent to send an pgSdslCellLOSSThreshTrap.
Limit of one trap will be sent for any one interval.
A value of '0' will disable the trap.rw INTEGER .1.3.6.1.4.1.927.1.14.1.1.6.1.3 |
pgSdslCellThresh15MinLOCDThe number of Loss of Cell Delineation,
encountered by an Cell SDSL interface within any given 15
minutes performance data collection period, which causes
the SNMP agent to send an pgSdslCellLOCDThreshTrap.
Limit of one trap will be sent for any one interval.
A value of '0' will disable the trap.rw Integer32 .1.3.6.1.4.1.927.1.14.1.1.6.1.4 |
pgSdslCellThresh15MinSLOCDThe number of Severe Loss of Cell Delineation,
encountered by an Cell SDSL interface within any given 15
minutes performance data collection period, which causes
the SNMP agent to send an pgSdslCellSLOCDThreshTrap.
Limit of one trap will be sent for any one interval.
A value of '0' will disable the trap.rw Integer32 .1.3.6.1.4.1.927.1.14.1.1.6.1.5 |
pgSdslCellThreshSNRThe SNR value below which causes
the SNMP agent to send a pgSdslCellSNRThreshTrap.
Limit of one trap will be sent for any TBD interval.
A value of '0' will disable the trap.rw Integer32 .1.3.6.1.4.1.927.1.14.1.1.6.1.6 |
pgSdslCellAlarmProfileInUseDefines whether this profile is in use. The agent must insure that
this object is up to date whenever the line table is updated.
If the implementator of this MIB has choosen not
to implement this feature, this object
should return noSuchName upon SNMP request.ro Enumeration .1.3.6.1.4.1.927.1.14.1.1.6.1.7 |
pgSdslCellPerfCurrTableThis table contains running counters on the Cell-SDSL Line
performance data. These counters will rollover after overflow.
These counters are used internally for testing and production
purposes and need not be displayed to the end-user since all of
the information is available in other history tables.
These counters are only cleared by explicitly calling the
pgSdslCellClearStats function. SEQUENCE OF PgSdslCellPerfCurrEntry .1.3.6.1.4.1.927.1.14.1.1.7 |
pgSdslCellPerfCurrEntryAn Entry in pgSdslCellPerfCurrTable PgSdslCellPerfCurrEntry .1.3.6.1.4.1.927.1.14.1.1.7.1 |
pgSdslCellPerfCurrLOSSThe number of Loss of Signal seconds, encountered
by an Cell SDSL interface since powered up or since last
cleared with a clear commandro Counter32 .1.3.6.1.4.1.927.1.14.1.1.7.1.1 |
pgSdslCellPerfCurrLOCDThe number of Loss of Cell Delineation, encountered
by an Cell SDSL interface since powered up or since last
cleared with a clear commandro Counter32 .1.3.6.1.4.1.927.1.14.1.1.7.1.2 |
pgSdslCellPerfCurrSLOCDThe number of Severe Loss of Cell Delineation, encountered
by an Cell SDSL interface since powered up or since last
cleared with a clear commandro Counter32 .1.3.6.1.4.1.927.1.14.1.1.7.1.3 |
pgSdslCellClearStatsClear running statistics counters to zero on this particular port.
Writing a '1' to this MIB object only clears the counters present in
pgSdslCellPerfCurrTable with the matching ifIndex.rw Enumeration .1.3.6.1.4.1.927.1.14.1.1.7.1.4 |
pgSdslCellStatsLastClearedThe value of MIB II's sysUpTime object at the
last time these statistics were cleared.
At power on, this value should contain 0.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.927.1.14.1.1.7.1.5 |
pgSdslCellPerfCurr15MinTableThis table contains information on the Cell-SDSL Line
performance data for the current 15 minute period SEQUENCE OF PgSdslCellPerfCurr15MinEntry .1.3.6.1.4.1.927.1.14.1.1.8 |
pgSdslCellPerfCurr15MinEntryAn Entry in pgSdslCellPerfCurr15MinTable PgSdslCellPerfCurr15MinEntry .1.3.6.1.4.1.927.1.14.1.1.8.1 |
pgSdslCellPerfCurr15MinLOSSThe number of Loss of Signal seconds, encountered
by an Cell SDSL interface within current 15
minutes performance data collection intervalro Counter32 .1.3.6.1.4.1.927.1.14.1.1.8.1.1 |
pgSdslCellPerfCurr15MinLOCDThe number of Loss of Cell Delineation, encountered
by an Cell SDSL interface within current 15
minutes performance data collection intervalro Counter32 .1.3.6.1.4.1.927.1.14.1.1.8.1.2 |
pgSdslCellPerfCurr15MinSLOCDThe number of Severe Loss of Cell Delineation, encountered
by an Cell SDSL interface within current 15
minutes performance data collection intervalro Counter32 .1.3.6.1.4.1.927.1.14.1.1.8.1.3 |
pgSdslCellClearHistoryWriting a '1' to this object clears all of the statistics and history counters
related to this port (ifIndex) except for the running counters stored in
pgSdslCellPerfCurrTable.
The following table entries indexed by ifIndex will be cleared by setting this object:
pgSdslCellPerfCurr15MinTable,
pgSdslCellPerf15MinIntervalTable,
pgSdslCellPerfCurr24hTable,
pgSdslCellPerf24hIntervalTable.rw Enumeration .1.3.6.1.4.1.927.1.14.1.1.8.1.4 |
pgSdslCellHistoryLastClearedThe value of MIB II's sysUpTime object at the
last time the history was cleared.
At power on, this value should contain 0.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.927.1.14.1.1.8.1.5 |
pgSdslCellPerf15MinIntervalTableThis table contains information on the Cell-SDSL Line
performance data for the previous (0-96) 15 minute Interval SEQUENCE OF PgSdslCellPerf15MinIntervalEntry .1.3.6.1.4.1.927.1.14.1.1.9 |
pgSdslCellPerf15MinIntervalEntryAn Entry in pgSdslCellPerf15MinIntervalTable PgSdslCellPerf15MinIntervalEntry .1.3.6.1.4.1.927.1.14.1.1.9.1 |
pgSdslCellPerf15MinIntervalIndexA number between 1 and 96, where 1 is the most
recently completed 15 minute interval and 96 is
the 15 minutes interval completed 23 hours and 45
minutes prior to interval 1.ro INTEGER .1.3.6.1.4.1.927.1.14.1.1.9.1.1 |
pgSdslCellPerf15MinIntervalLOSSThe number of Loss of Signal seconds , encountered
by an Cell SDSL interface within this 15 minutes performance
data collection intervalro Counter32 .1.3.6.1.4.1.927.1.14.1.1.9.1.2 |
pgSdslCellPerf15MinIntervalLOCDThe number of Loss of Cell Delineation , encountered
by an Cell SDSL interface within this 15 minutes performance
data collection intervalro Counter32 .1.3.6.1.4.1.927.1.14.1.1.9.1.3 |
pgSdslCellPerf15MinIntervalSLOCDThe number of severe Loss of Cell Delineation , encountered
by an Cell SDSL interface within this 15 minutes performance
data collection intervalro Counter32 .1.3.6.1.4.1.927.1.14.1.1.9.1.4 |
pgSdslCellPerfCurr24hTableThis table contains information on the Cell-SDSL Line
performance data for the current 24 hour period SEQUENCE OF PgSdslCellPerfCurr24hEntry .1.3.6.1.4.1.927.1.14.1.1.10 |
pgSdslCellPerfCurr24hEntryAn Entry in pgSdslCellPerfCurr24hTable PgSdslCellPerfCurr24hEntry .1.3.6.1.4.1.927.1.14.1.1.10.1 |
pgSdslCellPerfCurr24hLOSSThe number of Loss of Signal seconds, encountered
by an Cell SDSL interface within current 24
hour performance data collection intervalro Counter32 .1.3.6.1.4.1.927.1.14.1.1.10.1.1 |
pgSdslCellPerfCurr24hLOCDThe number of Loss of Cell Delineation, encountered
by an Cell SDSL interface within current 24
hour performance data collection intervalro Counter32 .1.3.6.1.4.1.927.1.14.1.1.10.1.2 |
pgSdslCellPerfCurr24hSLOCDThe number of Severe Loss of Cell Delineation, encountered
by an Cell SDSL interface within current 24
hour performance data collection intervalro Counter32 .1.3.6.1.4.1.927.1.14.1.1.10.1.3 |
pgSdslCellPerf24hIntervalTableThis table contains information on the Cell-SDSL Line
performance data for the previous 7 24 hour Interval SEQUENCE OF PgSdslCellPerf24hIntervalEntry .1.3.6.1.4.1.927.1.14.1.1.11 |
pgSdslCellPerf24hIntervalEntryAn Entry in pgSdslCellPerf24hIntervalTable PgSdslCellPerf24hIntervalEntry .1.3.6.1.4.1.927.1.14.1.1.11.1 |
pgSdslCellPerf24hIntervalIndexA number between 1 and 7, where 1 is the most
recently completed 24 hour intervalro INTEGER .1.3.6.1.4.1.927.1.14.1.1.11.1.1 |
pgSdslCellPerf24hIntervalLOSSThe number of Loss of Signal seconds , encountered
by an Cell SDSL interface within this 24 hour performance
data collection intervalro Counter32 .1.3.6.1.4.1.927.1.14.1.1.11.1.2 |
pgSdslCellPerf24hIntervalLOCDThe number of Loss of Cell Delineation , encountered
by an Cell SDSL interface within this 24 hour performance
data collection intervalro Counter32 .1.3.6.1.4.1.927.1.14.1.1.11.1.3 |
pgSdslCellPerf24hIntervalSLOCDThe number of severe Loss of Cell Delineation , encountered
by an Cell SDSL interface within this 24 hour performance
data collection intervalro Counter32 .1.3.6.1.4.1.927.1.14.1.1.11.1.4 |
pgSdslCellAlarmTableThis table provides the SDSL Cell alarm indications. SEQUENCE OF PgSdslCellAlarmEntry .1.3.6.1.4.1.927.1.14.1.1.12 |
pgSdslCellAlarmEntryEntries of the SDSL Cell alarm table PgSdslCellAlarmEntry .1.3.6.1.4.1.927.1.14.1.1.12.1 |
pgSdslCellCrossThreshLOSSWhen active the LOSS Threshold was crossed during the previous
15 minute interval and the condition has not yet been cleared.ro Enumeration .1.3.6.1.4.1.927.1.14.1.1.12.1.1 |
pgSdslCellCrossThreshLOCDWhen active the LOCD Threshold was crossed during the previous
15 minute interval and the condition has not yet been cleared.ro Enumeration .1.3.6.1.4.1.927.1.14.1.1.12.1.2 |
pgSdslCellCrossThreshSLOCDWhen active the SLOCD Threshold was crossed during the previous
15 minute interval and the condition has not yet been cleared.ro Enumeration .1.3.6.1.4.1.927.1.14.1.1.12.1.3 |
pgSdslCellCrossThreshSNRWhen active the current SNR is below the SNR Threshold.ro Enumeration .1.3.6.1.4.1.927.1.14.1.1.12.1.4 |
pgSdslCellHardwareCauseThis MIB object is used to communicate a port based hardware
failure.
1 = no failure detected
2 = transceiver failure detected. e.g. failure to communicate
with the transceiver.
3 = other port based hardware failurero Enumeration .1.3.6.1.4.1.927.1.14.1.1.12.1.5 |
pgSdslCellAlarmLastChangedThe value of MIB II's sysUpTime object at the
last time the alarm status changed.
At power on, this value should contain 0.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.927.1.14.1.1.12.1.6 |
pgSdslCellTraps OBJECT IDENTIFIER .1.3.6.1.4.1.927.1.14.1.2 |
pgSdslCellTrap OBJECT IDENTIFIER .1.3.6.1.4.1.927.1.14.1.2.0 |
pgSdslCellThreshLOSSTrapLoss of Signal 15-minute interval threshold exceeded NOTIFICATION-TYPE .1.3.6.1.4.1.927.1.14.1.2.0.1 |
pgSdslCellThreshLOCDTrapLoss of Cell Delineation 15-minute interval threshold exceeded NOTIFICATION-TYPE .1.3.6.1.4.1.927.1.14.1.2.0.2 |
pgSdslCellThreshSLOCDTrapSevere Loss of Cell Delination 15-minute interval threshold exceeded NOTIFICATION-TYPE .1.3.6.1.4.1.927.1.14.1.2.0.3 |
pgSdslCellThreshSNRTrapSNR 15-minute interval threshold exceeded NOTIFICATION-TYPE .1.3.6.1.4.1.927.1.14.1.2.0.4 |
pgSdslCellHardwareFaultTrapA hardware fault on this ifIndex has occurred. The pgSdslCellHardware Cause provides
a description of the type of the failure. NOTIFICATION-TYPE .1.3.6.1.4.1.927.1.14.1.2.0.5 |