Juniper-PPP-Profile-CONF
The Juniper-PPP-Profile-CONF MIB enables monitoring and management of Point-to-Point Protocol (PPP) profile configurations and associated session states on Juniper E-series routers. It provides access to specific configuration parameters and operational metrics required to validate PPP interface settings and troubleshoot dial-up or tunneling connections within the E-series platform.
Imported Objects
Objects
12 total| Object Name |
|---|
juniPppProfileAgentThe agent capabilities definitions for the PPP Profile component of the SNMP agent in the Juniper E-series family of products. MODULE-IDENTITY .1.3.6.1.4.1.4874.5.2.34.3 |
juniPppProfileAgentV1The MIB supported by the SNMP agent for the PPP Profile application in JUNOSe. These capabilities became obsolete when the dynamic multilink PPP object was added.obsolete Unknown .1.3.6.1.4.1.4874.5.2.34.3.1 |
juniPppProfileAgentV2The MIB supported by the SNMP agent for the PPP Profile application in JUNOSe. These capabilities became obsolete when the IPCP netmask option object was added.obsolete Unknown .1.3.6.1.4.1.4874.5.2.34.3.2 |
juniPppProfileAgentV3The MIB supported by the SNMP agent for the PPP Profile application in JUNOSe. These capabilities became obsolete when the authenticator virtual router object was added.obsolete Unknown .1.3.6.1.4.1.4874.5.2.34.3.3 |
juniPppProfileAgentV4The MIB supported by the SNMP agent for the PPP Profile application in JUNOSe. These capabilities became obsolete when the AAA profile ID object was added.obsolete Unknown .1.3.6.1.4.1.4874.5.2.34.3.4 |
juniPppProfileAgentV5The MIB supported by the SNMP agent for the PPP Profile application in JUNOSe. These capabilities became obsolete when the Initiate IP and Initiate IPv6 objects were added.obsolete Unknown .1.3.6.1.4.1.4874.5.2.34.3.5 |
juniPppProfileAgentV6The MIB supported by the SNMP agent for the PPP Profile application in JUNOSe. These capabilities became obsolete when the MLPPP fragmentation and reassembly parameters were added.obsolete Unknown .1.3.6.1.4.1.4874.5.2.34.3.6 |
juniPppProfileAgentV7The MIB supported by the SNMP agent for the PPP Profile application in JUNOSe. These capabilities became obsolete when the hash-based link selction option was added to MLPPP.obsolete Unknown .1.3.6.1.4.1.4874.5.2.34.3.7 |
juniPppProfileAgentV8The MIB supported by the SNMP agent for the PPP Profile application in JUNOSe. These capabilities became obsolete when object rsPppProfileLcpAuthentication2 was added.obsolete Unknown .1.3.6.1.4.1.4874.5.2.34.3.8 |
juniPppProfileAgentV9The MIB supported by the SNMP agent for the PPP Profile application in JUNOSe. These capabilities became obsolete when object rsPppProfileIpcpDnsOption and rsPppProfileIpcpLockout was addedobsolete Unknown .1.3.6.1.4.1.4874.5.2.34.3.9 |
juniPppProfileAgentV10The MIB supported by the SNMP agent for the PPP Profile application in JUNOSe.These capabilities became obsolete when support for Multiclass MLPPP was added.obsolete Unknown .1.3.6.1.4.1.4874.5.2.34.3.10 |
juniPppProfileAgentV11The MIB supported by the SNMP agent for the PPP Profile application in JUNOSe. Unknown .1.3.6.1.4.1.4874.5.2.34.3.11 |
More MIBs from Unisphere
Browse all UnisphereMIBs →SNMP MIB module
The Unisphere-Data-BGP-MIB enables monitoring and management of Border Gateway Protocol (BGP) session states, routing table statistics, and neighbor relationships on Dell EMC Unisphere for Data storage systems. It provides access to standard BGP MIB objects for tracking peer connectivity, route advertisements, and protocol error counters within the storage network infrastructure.
The Juniper-RADIUS-CLIENT-MIB enables monitoring of RADIUS client authentication sessions, accounting records, and server reachability states on Juniper network devices. It provides specific counters and gauges for tracking authentication failures, successful logins, and RADIUS server response times to validate access control infrastructure health.
The Juniper-UNI-ATM-MIB module provides SNMP management capabilities for Juniper devices configured with Asynchronous Transfer Mode (ATM) user-network interfaces, enabling the monitoring of ATM-specific performance counters, interface states, and VPI/VCI traffic statistics.
The Juniper-AAA-MIB enables monitoring of authentication, authorization, and accounting events on Juniper Networks devices, specifically tracking user session states, login success/failure counts, and accounting record generation for RADIUS and TACACS+ protocols.
SNMP MIB module