Juniper-OSPF-MIB
AI MIB Summary
The Juniper-OSPF-MIB enables monitoring and management of Open Shortest Path First (OSPF) routing protocol instances on Juniper Networks devices, exposing critical metrics such as neighbor adjacency states, interface link costs, LSDB synchronization status, and SPF calculation statistics.
The OSPF Protocol MIB for the Juniper Networks enterprise.
Main OID:
juniOspfMIB.1.3.6.1.4.1.4874.2.2.14
98
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
98 total| Object Name |
|---|
juniOspfMIBThe OSPF Protocol MIB for the Juniper Networks enterprise. MODULE-IDENTITY .1.3.6.1.4.1.4874.2.2.14 |
juniOspfObjects OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.14.1 |
juniOspfGeneralGroup OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.14.1.1 |
juniOspfProcessIdAn identifier having special semantics when set.
When this object's value is zero, OSPF is disabled and cannot be
configured. Setting this object to a nonzero value enables OSPF
operation and permits further OSPF configuration to be performed.
Once set to a nonzero value, this object cannot be modified.rw Integer32 .1.3.6.1.4.1.4874.2.2.14.1.1.1 |
juniOspfMaxPathSplitsThe maximum number of equal-cost routes that will be maintained by the
OSPF protocol.
A change in this value will be taken into account at the next
shortest-path-first recalculation.rw Integer32 .1.3.6.1.4.1.4874.2.2.14.1.1.2 |
juniOspfSpfHoldIntervalThe minimum amount of time that must elapse between shortest-path-first
recalculations.
Reducing this value can cause an immediate SPF recalulation if the new
value is less than the current value of juniOspfSpfHoldTimeRemaining and
other SPF-inducing protocol events have occurred.rw Integer32 .1.3.6.1.4.1.4874.2.2.14.1.1.3 |
juniOspfNumActiveAreasThe number of active areas.ro Counter32 .1.3.6.1.4.1.4874.2.2.14.1.1.4 |
juniOspfSpfTimeThe SPF schedule delay.ro Counter32 .1.3.6.1.4.1.4874.2.2.14.1.1.5 |
juniOspfRefBwThe reference bandwith, in bits per second. This object is used when
OSPF automatic interface cost calculation is used.rw Unsigned32 .1.3.6.1.4.1.4874.2.2.14.1.1.6 |
juniOspfAutoVlinkSet this object to true(1) in order to have virtual links automatically
configured.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.14.1.1.7 |
juniOspfIntraDistanceDefault distance for intra-area routes.rw Integer32 .1.3.6.1.4.1.4874.2.2.14.1.1.8 |
juniOspfInterDistanceDefault distance for inter-area routes.rw Integer32 .1.3.6.1.4.1.4874.2.2.14.1.1.9 |
juniOspfExtDistanceDefault distance for external type 5 and type 7 routes.rw Integer32 .1.3.6.1.4.1.4874.2.2.14.1.1.10 |
juniOspfHelloPktsRcvNumber of hello packets received.ro Counter32 .1.3.6.1.4.1.4874.2.2.14.1.1.11 |
juniOspfDDPktsRcvNumber of database description packets received.ro Counter32 .1.3.6.1.4.1.4874.2.2.14.1.1.12 |
juniOspfLsrPktsRcvNumber of link state request packets received.ro Counter32 .1.3.6.1.4.1.4874.2.2.14.1.1.13 |
juniOspfLsuPktsRcvNumber of link state update packets received.ro Counter32 .1.3.6.1.4.1.4874.2.2.14.1.1.14 |
juniOspfLsAckPktsRcvNumber of link state ACK packets received.ro Counter32 .1.3.6.1.4.1.4874.2.2.14.1.1.15 |
juniOspfTotalRcvNumber of OSPF packets received.ro Counter32 .1.3.6.1.4.1.4874.2.2.14.1.1.16 |
juniOspfLsaDiscardCntNumber of LSA packets discarded.ro Counter32 .1.3.6.1.4.1.4874.2.2.14.1.1.17 |
juniOspfHelloPktsSentNumber of hello packets sent.ro Counter32 .1.3.6.1.4.1.4874.2.2.14.1.1.18 |
juniOspfDDPktsSentNumber of database description packets sent.ro Counter32 .1.3.6.1.4.1.4874.2.2.14.1.1.19 |
juniOspfLsrPktsSentNumber of link state request packets sent.ro Counter32 .1.3.6.1.4.1.4874.2.2.14.1.1.20 |
juniOspfLsuPktsSentNumber of link state update packets sent.ro Counter32 .1.3.6.1.4.1.4874.2.2.14.1.1.21 |
juniOspfLsAckPktsSentNumber of link state ACK packets sent.ro Counter32 .1.3.6.1.4.1.4874.2.2.14.1.1.22 |
juniOspfErrPktsSentNumber of packets dropped.ro Counter32 .1.3.6.1.4.1.4874.2.2.14.1.1.23 |
juniOspfTotalSentNumber of OSPF packets sent.ro Counter32 .1.3.6.1.4.1.4874.2.2.14.1.1.24 |
juniOspfCsumErrPktsNumber of packets received with a checksum error.ro Counter32 .1.3.6.1.4.1.4874.2.2.14.1.1.25 |
juniOspfAllocFailNbrNumber of neighbor allocation failures.ro Counter32 .1.3.6.1.4.1.4874.2.2.14.1.1.26 |
juniOspfAllocFailLsaNumber of LSA allocation failures.ro Counter32 .1.3.6.1.4.1.4874.2.2.14.1.1.27 |
juniOspfAllocFailLsdNumber of LSA HDR allocation failures.ro Counter32 .1.3.6.1.4.1.4874.2.2.14.1.1.28 |
juniOspfAllocFailDbRequestNumber of database request allocation failures.ro Counter32 .1.3.6.1.4.1.4874.2.2.14.1.1.29 |
juniOspfAllocFailRtxNumber of RTX allocation failures.ro Counter32 .1.3.6.1.4.1.4874.2.2.14.1.1.30 |
juniOspfAllocFailAckNumber of LS ACK allocation failures.ro Counter32 .1.3.6.1.4.1.4874.2.2.14.1.1.31 |
juniOspfAllocFailDbPktNumber of DD packet allocation failures.ro Counter32 .1.3.6.1.4.1.4874.2.2.14.1.1.32 |
juniOspfAllocFailCircNumber of OSPF interface allocation failures.ro Counter32 .1.3.6.1.4.1.4874.2.2.14.1.1.33 |
juniOspfAllocFailPktNumber of OSPF general packet allocation failures.ro Counter32 .1.3.6.1.4.1.4874.2.2.14.1.1.34 |
juniOspfOperStateA flag to note whether this router is operational.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.14.1.1.35 |
juniOspfVpnRouteTagVPN route tag value.rw Unsigned32 .1.3.6.1.4.1.4874.2.2.14.1.1.36 |
juniOspfDomainIdOSPF domain ID.rw Unsigned32 .1.3.6.1.4.1.4874.2.2.14.1.1.37 |
juniOspfMplsTeRtrIdIfIndexConfigure the stable router interface id to designate it as TE
capable.rw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.4874.2.2.14.1.1.38 |
juniOspfAreaTableThe Juniper OSPF area table describes the OSPF-specific
characteristics of areas. SEQUENCE OF JuniOspfAreaEntry .1.3.6.1.4.1.4874.2.2.14.1.2 |
juniOspfAreaEntryThe OSPF area entry describes OSPF-specific characteristics of one
area. JuniOspfAreaEntry .1.3.6.1.4.1.4874.2.2.14.1.2.1 |
juniOspfAreaTypeThe type of this area.ro Enumeration .1.3.6.1.4.1.4874.2.2.14.1.2.1.1 |
juniOspfAreaTeCapableConfigure the specified area TE capable to flood the TE information.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.14.1.2.1.2 |
juniOspfIfTableThe Juniper OSPF interface table describes the OSPF-specific
characteristics of interfaces. SEQUENCE OF JuniOspfIfEntry .1.3.6.1.4.1.4874.2.2.14.1.7 |
juniOspfIfEntryThe OSPF interface entry describes OSPF-specific characteristics of one
interface. JuniOspfIfEntry .1.3.6.1.4.1.4874.2.2.14.1.7.1 |
juniOspfIfCostThe cost value for this interface.rw Integer32 .1.3.6.1.4.1.4874.2.2.14.1.7.1.1 |
juniOspfIfMaskThe mask used to derive the network range of this interface.rw IpAddress .1.3.6.1.4.1.4874.2.2.14.1.7.1.2 |
juniOspfIfPassiveFlagFlag to indicate whether routing updates should be suppressed on this
interface. To actively perform routing updates, set this object to
disabled(0).rw Enumeration .1.3.6.1.4.1.4874.2.2.14.1.7.1.3 |
juniOspfIfNbrCountNumber of OSPF neighbors from this interface.ro Counter32 .1.3.6.1.4.1.4874.2.2.14.1.7.1.4 |
juniOspfIfAdjNbrCountNumber of OSPF adjacent neighbors from this interface.ro Counter32 .1.3.6.1.4.1.4874.2.2.14.1.7.1.5 |
juniOspfIfMd5AuthKeyThe MD5 authentication key. When setting this object, the
juniOspfIfMd5AuthKeyId must be specified on the same PDU. For simple
text authentication type, use ospfIfAuthKey. Setting this object will
have the side effect of adding or updating the correspondent entry in
juniOspfMd5IntfKeyTable. If key given has less than 16 octets, such
value will be appended with zeros to complete 16 octets. The zeros will
appended to the right of the given key. Reading this object always
results in an OCTET STRING of length zero.rw OCTET STRING .1.3.6.1.4.1.4874.2.2.14.1.7.1.6 |
juniOspfIfMd5AuthKeyIdThe MD5 authentication key ID. When setting this object,
juniOspfIfMd5AuthKey must be specified on the same PDU.rw Integer32 .1.3.6.1.4.1.4874.2.2.14.1.7.1.7 |
juniOspfIfBFDTableThe Juniper OSPF interface table describes the BFD-specific
characteristics of interfaces. SEQUENCE OF JuniOspfIfBFDEntry .1.3.6.1.4.1.4874.2.2.14.1.8 |
juniOspfIfBFDEntryThe Juniper OSPF interface table describes the BFD-specific
characteristics of one interface. JuniOspfIfBFDEntry .1.3.6.1.4.1.4874.2.2.14.1.8.1 |
juniOspfIfBfdEnableThis variable indicates whether BFD session on the interface is active or notrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.14.1.8.1.1 |
juniOspfIfBfdMinRxIntervalThis variable specifies upper-limit on rate local-system requires remote-system to
transmit bfd control-packets [milliseconds]rw Integer32 .1.3.6.1.4.1.4874.2.2.14.1.8.1.2 |
juniOspfIfBfdMinTxIntervalThis variable specifies lower-limit on rate local-system requires remote-system to
transmit bfd control-packets [milliseconds]rw Integer32 .1.3.6.1.4.1.4874.2.2.14.1.8.1.3 |
juniOspfIfBfdMultiplierThis variable specifies detection-multiplierrw Integer32 .1.3.6.1.4.1.4874.2.2.14.1.8.1.4 |
juniOspfVirtIfTableThe Juniper OSPF virtual interface table describes the OSPF-specific
characteristics of virtual interfaces. SEQUENCE OF JuniOspfVirtIfEntry .1.3.6.1.4.1.4874.2.2.14.1.9 |
juniOspfVirtIfEntryThe OSPF virtual interface entry describes OSPF-specific
characteristics of one virtual interface. JuniOspfVirtIfEntry .1.3.6.1.4.1.4874.2.2.14.1.9.1 |
juniOspfVirtIfMd5AuthKeyThe MD5 authentication key. When setting this object, the
juniOspfVirtIfMd5AuthKeyId must be specified on the same PDU. For
simple text authentication type, use ospfVirtIfAuthKey. Setting this
object will have the side effect of adding or updating the correspondent
entry in juniOspfMd5IntfKeyTable. If key given has less than 16 octets,
such value will be appended with zeros to complete 16 octets. The zeros
will appended to the right of the given key. Reading this object always
results in an OCTET STRING of length zero.rw OCTET STRING .1.3.6.1.4.1.4874.2.2.14.1.9.1.1 |
juniOspfVirtIfMd5AuthKeyIdThe MD5 authentication key id. When setting this object,
juniOspfVirtIfMd5AuthKey must be specified on the same psu.rw Integer32 .1.3.6.1.4.1.4874.2.2.14.1.9.1.2 |
juniOspfNbrTableThe Juniper OSPF neighbor table describes the OSPF-specific
characteristics of neighbors. SEQUENCE OF JuniOspfNbrEntry .1.3.6.1.4.1.4874.2.2.14.1.10 |
juniOspfNbrEntryThe OSPF neighbor entry describes OSPF-specific characteristics of one
neighbor. JuniOspfNbrEntry .1.3.6.1.4.1.4874.2.2.14.1.10.1 |
juniOspfNbrLocalIpAddrThe local IP address on this OSPF circuit.ro IpAddress .1.3.6.1.4.1.4874.2.2.14.1.10.1.1 |
juniOspfNbrDRThe neighbor's idea of designated router.ro IpAddress .1.3.6.1.4.1.4874.2.2.14.1.10.1.2 |
juniOspfNbrBDRThe neighbor's idea of backup designated router.ro IpAddress .1.3.6.1.4.1.4874.2.2.14.1.10.1.3 |
juniOspfSummImportTableThe Juniper OSPF summary import table describes the OSPF-specific
characteristics of network aggregation into the OSPF autonomous system.
With this table, the load of advertising many external routes can be
reduced by specifying a range which includes some or all of the external
routes. SEQUENCE OF JuniOspfSummImportEntry .1.3.6.1.4.1.4874.2.2.14.1.15 |
juniOspfSummImportEntryThe OSPF summary import entry describes OSPF-specific characteristics
of one summary report. JuniOspfSummImportEntry .1.3.6.1.4.1.4874.2.2.14.1.15.1 |
juniOspfSummAggNetThe summary address for a range of addresses.ro IpAddress .1.3.6.1.4.1.4874.2.2.14.1.15.1.1 |
juniOspfSummAggMaskThe subnet mask used for the summary route.ro IpAddress .1.3.6.1.4.1.4874.2.2.14.1.15.1.2 |
juniOspfSummAdminStatThe admin status of this summary aggregation.rw Enumeration .1.3.6.1.4.1.4874.2.2.14.1.15.1.3 |
juniOspfSummRowStatusThis variable displays the status of the entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.14.1.15.1.4 |
juniOspfMd5IntfTableThe Juniper OSPF interface MD5 key table describes OSPF-specific
characteristics of the MD5 authentication key for the OSPF interfaces.
This table is not to be used for the simple password authentication. SEQUENCE OF JuniOspfMd5IntfEntry .1.3.6.1.4.1.4874.2.2.14.1.16 |
juniOspfMd5IntfEntryThe OSPF interface MD5 key entry describes OSPF-specific
characteristics of one MD5 authentication's interface. JuniOspfMd5IntfEntry .1.3.6.1.4.1.4874.2.2.14.1.16.1 |
juniOspfMd5IntfKeyIdThe OSPF interface this key belongs to.ro Integer32 .1.3.6.1.4.1.4874.2.2.14.1.16.1.1 |
juniOspfMd5IntfKeyActiveSet this object to true(1) in order to have this key active.rwdeprecated TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.14.1.16.1.2 |
juniOspfMd5IntfAuthKeyThe MD5 authentication key. If key given has less than 16 octets, such
value will be appended with zeros to complete 16 octets. The zeros will
appended to the right of the given key. Reading this object always
results in an OCTET STRING of length zero.rw OCTET STRING .1.3.6.1.4.1.4874.2.2.14.1.16.1.3 |
juniOspfMd5IntfRowStatusThis variable displays the status of the entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.14.1.16.1.4 |
juniOspfMd5VirtIntfTableThe Juniper OSPF interface MD5 key table describes OSPF-specific
characteristics of the MD5 authentication key for the OSPF interfaces.
This table is not to be used for the simple password authentication. SEQUENCE OF JuniOspfMd5VirtIntfEntry .1.3.6.1.4.1.4874.2.2.14.1.17 |
juniOspfMd5VirtIntfEntryThe OSPF Interface MD5 Key entry describes OSPF-specific
characteristics of one MD5 authentication's interface. JuniOspfMd5VirtIntfEntry .1.3.6.1.4.1.4874.2.2.14.1.17.1 |
juniOspfMd5VirtIntfAreaIdThe OSPF area ID this key belongs to.ro IpAddress .1.3.6.1.4.1.4874.2.2.14.1.17.1.1 |
juniOspfMd5VirtIntfNeighborThe OSPF neightbor this key belongs to.ro IpAddress .1.3.6.1.4.1.4874.2.2.14.1.17.1.2 |
juniOspfMd5VirtIntfKeyIdThe OSPF virtual interface this key belongs to.ro Integer32 .1.3.6.1.4.1.4874.2.2.14.1.17.1.3 |
juniOspfMd5VirtIntfKeyActiveSet this object to true(1) in order to have this key active.rwdeprecated TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.14.1.17.1.4 |
juniOspfMd5VirtIntfAuthKeyThe MD5 authentication key. If key given has less than 16 octets, such
value will be appended with zeros to complete 16 octets. The zeros will
appended to the right of the given key. Reading this object always
results in an OCTET STRING of length zero.rw OCTET STRING .1.3.6.1.4.1.4874.2.2.14.1.17.1.5 |
juniOspfMd5VirtIntfRowStatusThis variable displays the status of the entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.14.1.17.1.6 |
juniOspfNetworkRangeTableThe Juniper OSPF network range table describes the OSPF-specific
characteristics of network ranges, encompassing one or multiple OSPF
interfaces. SEQUENCE OF JuniOspfNetworkRangeEntry .1.3.6.1.4.1.4874.2.2.14.1.18 |
juniOspfNetworkRangeEntryThe Juniper OSPF network range entry describes OSPF-specific
characteristics of one OSPF network range. JuniOspfNetworkRangeEntry .1.3.6.1.4.1.4874.2.2.14.1.18.1 |
juniOspfNetRangeNetThe network range address.ro IpAddress .1.3.6.1.4.1.4874.2.2.14.1.18.1.1 |
juniOspfNetRangeMaskThe subnet mask used for the network range. Unlike the mask used under
the command line interface (CLI), this object is set in the non-inversed
format (i.e. not a wild-card mask).ro IpAddress .1.3.6.1.4.1.4874.2.2.14.1.18.1.2 |
juniOspfNetRangeAreaIdThe OSPF area ID this network range belongs to.ro IpAddress .1.3.6.1.4.1.4874.2.2.14.1.18.1.3 |
juniOspfNetRangeRowStatusThis variable displays the status of the entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.14.1.18.1.4 |
juniOspfConformance OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.14.4 |
juniOspfCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.14.4.1 |
juniOspfGroups OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.14.4.2 |